A Review of Cu-Ni-Sn Alloys: Processing, Microstructure, Properties, and Developing Trends

Cu-Ni-Sn alloys have been widely used in the aerospace industry, the electronics industry, and other fields due to their excellent electrical and thermal conductivity, high strength, corrosion and wear resistance, etc., which make Cu-15Ni-8Sn alloys the perfect alternative to Cu-Be alloys. This paper begins with how Cu-Ni-Sn alloys are prepared. Then, the microstructural features, especially the precipitation order of each phase, are described. In addition, the influence of alloying elements, such as Si, Ti, and Nb, on its microstructure and properties is discussed. Finally, the effects of plastic deformation and heat treatment on Cu-Ni-Sn alloys are discussed. This review is able to provide insight into the development of novel Cu-Ni-Sn alloys with a high performance.

Lignin-Containing Cellulose Nanofibrils from TEMPO-Mediated Oxidation of Date Palm Waste: Preparation, Characterization, and Reinforcing Potential

Lignin-containing cellulose nanofibrils (LCNFs) have emerged as a new class of nanocelluloses where the presence of residual lignin is expected to impart additional attributes such as hydrophobicity or UV-absorption. In the present work, LCNFs with a lignin content between 7 and 15 wt% were prepared via a TEMPO-mediated oxidation as chemical pretreatment followed by high-pressure homogenization. The impact of the carboxyl content (CC) on the properties of the resulting LCNF gel, in terms of lignin content, colloidal properties, morphology, crystallinity, and thermal stability, were investigated. It was found that lignin content was significantly decreased at increasing CC. In addition, CC had a positive effect on colloidal stability and water contact angle, as well as resulting in smaller fibrils. This lower size, together with the lower lignin content, resulted in a slightly lower thermal stability. The reinforcing potential of the LCNFs when incorporated into a ductile polymer matrix was also explored by preparing nanocomposite films with different LCNF contents that were mechanically tested under linear and non-linear regimes by dynamic mechanical analysis (DMA) and tensile tests. For comparison purposes, the reinforcing effect of the LCNFs with lignin-free CNFs was also reported based on literature data. It was found that lignin hinders the network-forming capacity of LCNFs, as literature data shows a higher reinforcing potential of lignin-free CNFs. Nonetheless, the tensile strength of the acrylic matrix was enhanced by 10-fold at 10 wt% of LCNF content.

Progress of Polymer Application in Coated Proppant and Ultra-Low Density Proppant

Design, synthesis and application of low-density proppant (LDP) are of great significance for efficient and clean exploitation of low permeability oil and gas. On the basis of a brief introduction of hydraulic fracturing and the application of traditional proppants, this review systematically summarized the polymer application progress in LDP, including coated sand, coated ceramics, coated nutshells, especially for polymer composites based ultra-low density proppant (ULDP). Finally, the existing problems and future development direction are also prospected.

Synthesis and Structure of 2-Hydroxypropyl Methacrylate-Capped Isophorone Diisocyanate and Poly(Propylene Glycol) Urethane Mixtures and the Properties of their UV-Cured Co-Networks with Isobornyl Methacrylate

Polyurethane acrylate prepolymers with different contents of HIPIH and HIH were synthesized via reacting excessive isophorone diisocyanate (IPDI) with poly(propylene glycol) (PPG) and then end-capping with 2-hydroxypropyl methacrylate (HPMA) in isobornyl methacrylate (IBOMA). After the addition of the photoinitiator PI 1173, the resulting prepolymer resins were irradiated by UV light to form cured materials. The structures of the prepolymers were confirmed by ¹H NMR, FT-IR, and GPC. SEM analyses proved that no obvious phase separation was observed within the cured sample. As the content of HIH increased, the viscosity of the prepolymers increased slightly. In addition, the gel content, solvent resistance, Shore hardness, Young's modulus, and the tensile strength of the cured films increased, whereas the elongation at break decreased gradually. The volume shrinkage of the cured samples ranged between 4.5% and 4.8%. DMA analyses showed that the Tgs of the cured samples increased as more HIH structures existed. TGA analyses revealed that the cured samples had high thermal stability. This solvent-free fabrication process was simple, convenient, and controllable. By simply regulating the contents of HIPIH and HIH in the prepolymers, the performances of the cured materials could be adjusted to a wide range.

Application Progress of PALS in the Correlation of Structure and Properties for Graphene/Polymer Nanocomposites

Giving a deep insight into the microstructure, and realizing the correlation between microstructure and properties is very important to the precise construction of high-performance graphene/polymer nanocomposites (GPN). For the promising application in microstructure characterization, much attention has been focused on the effective technique of positron annihilation lifetime spectroscopy (PALS). Based on the introduction of the basic principle, this review summarized the application progress of PALS in the correlation of microstructure and properties for GPN, especially for the characterization of free volume and interfacial interaction, and the correlation of these microstructures and properties.

Acetylated polysaccharides: Synthesis, physicochemical properties, bioactivities, and food applications

Polysaccharides are biomacromolecular widely applied in the food industry, as gelling agents, thickeners and health supplements. As hydrophobic groups, acetyls provide amphiphilicity to polysaccharides with numerous hydroxyl groups, which greatly expand the presence of polysaccharides in organic organisms and various chemical environments. Acetylation could result in diverseness and promotion of the structure of polysaccharides, which improve the physicochemical properties and biological activities. High efficient and environmentally friendly access to acetylated derivatives of different polysaccharides is being explored. This review discusses and summarizes acetylated polysaccharides in terms of synthetic methods, physicochemical properties and biological activities and emphasizes the structure-effect relationships introduced by acetyl groups to reveal the potential mechanism of acetylated polysaccharides. Acetyls with different contents and substitution sites could change the molecular weight, monosaccharide composition and spatial architecture of polysaccharides, resulting in differences among properties such as water solubility, emulsification and crystallinity. Coupled with acetyls, polysaccharides have increased antioxidant, immunomodulatory, antitumor, and pro-prebiotic capacities. In addition, their possible applications have also been discussed in green food materials, bioactive ingredient carriers and functional food products, indicating that acetylated polysaccharides hold a clear vision in food health and industrial development.

The multidimensional legal nature of personal genomic sequence data: A South African perspective

This article provides a comprehensive analysis of the various dimensions in South African law applicable to personal genomic sequence data. This analysis includes property rights, personality rights, and intellectual property rights. Importantly, the under-investigated question of whether personal genomic sequence data are capable of being owned is investigated and answered affirmatively. In addition to being susceptible of ownership, personal genomic sequence data are also the object of data subjects' personality rights, and can also be the object of intellectual property rights: whether on their own qua trade secret or as part of a patented invention or copyrighted dataset. It is shown that personality rights constrain ownership rights, while the exploitation of intellectual property rights is constrained by both personality rights and ownership rights. All of these rights applicable to personal genomic sequence data should be acknowledged and harmonized for such data to be used effectively.

Selected Properties of Two Alternative Plant Fibers: Canola and Sweet Clover Fibers

Identifying sustainable resources of natural fibers is essential due to their high demand in industrial applications such as automotive and biomedical materials. Two alternative fibers obtained from canola and sweet clover stalks were characterized for their properties using energy dispersive X-ray spectroscopy (EDS), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), thermogravimetric analysis (TGA), contact angle, and tensile test. Hemp and flax fibers, both in use as industrial fibers, were also characterized as conventional fibers. Results showed that all the fibers had the same chemical elements (carbon, oxygen, magnesium, and potassium) and chemical bonds. The crystallinity index for the alternative fibers ranged from 62 to 71%, which was close but lower than the conventional fibers (82% for hemp and 80% for flax). The thermal stability of the alternative fibers was around 220 °C, close to the conventional fibers (230 °C). The alternative fibers had contact angles of less than 90°, showing high surface energy. Since the alternative fibers had a low Young's modulus and tensile strength (5.57-8.52 GPa and 57.45-71.26 MPa, respectively), they are suitable for some specific applications in the biomedical industry. In contrast, conventional fibers are suitable where a higher stiffness and strength is required.

Ownership psychology as a cognitive adaptation: A minimalist model

Ownership is universal and ubiquitous in human societies, yet the psychology underpinning ownership intuitions is generally not described in a coherent and computationally tractable manner. Ownership intuitions are commonly assumed to derive from culturally transmitted social norms, or from a mentally represented implicit theory. While the social norms account is entirely ad hoc, the mental theory requires prior assumptions about possession and ownership that must be explained. Here I propose such an explanation, arguing that the intuitions result from the interaction of two cognitive systems. One of these handles competitive interactions for the possession of resources observed in many species including humans. The other handles mutually beneficial cooperation between agents, as observed in communal sharing, collective action and trade. Together, these systems attend to specific cues in the environment, and produce definite intuitions such as "this is hers," "that is not mine." This computational model provides an explanation for ownership intuitions, not just in straightforward cases of property, but also in disputed ownership (squatters, indigenous rights), historical changes (abolition of slavery), as well as apparently marginal cases, such as the questions, whether people own their seats on the bus, or their places in a queue, and how people understand "cultural appropriation" and slavery. In contrast to some previous theories, the model is empirically testable and free of ad hoc stipulations.

Uniquely You, Uniquely Yours? Applying the Current Property Law Regime to Human DNA Samples

Rapid developments in biotechnology have brought questions regarding ownership of human genetic material to the forefront of the public conscience. This article aims to determine the current approach of Australian and United Kingdom courts to property disputes regarding human biological material and adjudicate its relevance in the context of human deoxyribonucleic acid (DNA) ownership. Following initial exploration of the question of whether DNA ought to be considered an object of property, it argues that the dominant approach established by the landmark decision of Doodeward v Spence (1908) 6 CLR 406 is weaker than the newer "guided discretion" basis in the DNA context. It concludes this latter approach is far better equipped to respond to key policy concerns associated with recognising property rights in DNA.

[Application of UPLC-QTOF-MS non-targeted metabonomics in mechanism study of property differences of ginseng and American ginseng]

This study adopted ultra-performance liquid chromatography-quadrupole time-of-flight mass spectrometry(UPLC-QTOF-MS)-based untargeted metabolomic approaches for exploring the changes in endogenous metabolites of rat serum related to property differences between ginseng and American ginseng. Then the action mechanisms of them with warm and cool properties and the effects of processing on their property changes were investigated. Based on principal component analysis(PCA), the differences in metabolite profiles between ginseng, red ginseng, American ginseng, and red American ginseng were compared. After that, 16 potential differential endogenous biomarkers were identified by orthogonal partial least squares discriminant analysis(OPLS-DA) and online database searching. And the related metabolic pathways were systematically analyzed. By comparing content variations of these 16 potential differential endogenous biomarkers, we have found that 10 potential differential biomarkers were responsible for the warm property of ginseng and red ginseng, and 9 were related to the cool property of American ginseng and red American ginseng. As demonstrated by in-depth analysis of related metabolic pathways of differential biomarkers, ginseng and American ginseng mainly played a role in regulating the energy metabolism of amino acid, glycolysis, and fatty acids, during which they exhibited differences in property. The comparison of content variations of these differential endogenous between groups revealed that the energy metabolism of red ginseng group was stronger than that of ginseng group, consistent with the traditional processing theory that the warming and tonifying effects of ginseng could be enhanced after processing. The property of red American ginseng was similar to that of American ginseng, both cool in property, but American ginseng was cooler than red American ginseng. It can be seen that non-targeted metabolomic approaches can be utilized to study mechanisms underlying property differences of Chinese medicines and the effects of processing on their property changes.

Unraveling Cuticle Formation, Structure, and Properties by Using Tomato Genetic Diversity

The tomato (Solanum lycopersicum) fruit has a thick, astomatous cuticle that has become a model for the study of cuticle formation, structure, and properties in plants. Tomato is also a major horticultural crop and a long-standing model for research in genetics, fruit development, and disease resistance. As a result, a wealth of genetic resources and genomic tools have been established, including collections of natural and artificially induced genetic diversity, introgression lines of genome fragments from wild relatives, high-quality genome sequences, phenotype and gene expression databases, and efficient methods for genetic transformation and editing of target genes. This mini-review reports the considerable progresses made in recent years in our understanding of cuticle by using and generating genetic diversity for cuticle-associated traits in tomato. These include the synthesis of the main cuticle components (cutin and waxes), their role in the structure and properties of the cuticle, their interaction with other cell wall polymers as well as the regulation of cuticle formation. It also addresses the opportunities offered by the untapped germplasm diversity available in tomato and the current strategies available to exploit them.

Relationship between the Microstructure and Performance of Graphene/Polyethylene Composites Investigated by Positron Annihilation Lifetime Spectroscopy

The quantitative characterization of microstructure is most desirable for the establishment of structure-property relationships in polymer nanocomposites. In this work, the effects of graphene on the microstructure, mechanical, electrical, and thermal properties of the obtained graphene/polyethylene (PE) composites were investigated. In order to reveal the structure-performance relationship of graphene/PE composites, especially for the effects of the relative free volume fraction (fr) and interfacial interaction intensity (β), positron annihilation lifetime spectroscopy (PALS) was employed for its quantitative description. The relative free volume fraction fr gives a good explanation of the variation for surface resistivity, melting temperature, and thermal stability, and the variation of tensile strength and thermal conductivity agree well with the results of interfacial interaction intensity β. The results showed that fr and β have a significant effect on the properties of the obtained graphene/PE composites, and the effect on the properties was revealed.

Effect of Heat Treatment on the Property, Structure, and Aggregation of Skim Milk Proteins

To study the mechanism of heat-induced protein aggregates, skim milk was heated at 55, 65, 75, 85, and 95°C for 30 s. Then, the sulfhydryl content, surface hydrophobicity, and secondary structure of heat-treated skim milk were studied. Treating skim milk at different temperatures induced a decrease in sulfhydryl content (75.9% at 95°C) and an increase in surface hydrophobicity (44% at 95°C) with a disrupted secondary structure containing random coil, β-sheet, and β-turn of skim milk proteins. The change in these properties facilitated aggregate formation through disulfide bonds and hydrophobicity interaction. Microstructural observation also showed a higher degree of aggregation when skim milk was heated at 85 and 95°C. The result of two-dimensional polyacrylamide gel electrophoresis demonstrated that the aggregates consisted of a high proportion of κ-casein, β-lactoglobulin, and other whey proteins.

[Retrospect and prospect of researches on acupoint property: commemorating the 40th anniversary of Chinese Acupuncture & Moxibustion's founding]

The researches on acupoint property at modern times have been reviewed. Under the influence of TCM theory and modern technology, acupoint property is classified into generality, individuality and bidirectional regulation. It is affected mainly by acupoint compatibility, intervention measures, body state, etc. The research of acupoint property should be based on the connotation and clinical application of acupoint, adhere to the guidance of TCM theory, strengthen the exploration on the richness of acupoint property, implement the intersection of multi-disciplines to discover the specificity of acupoint, as well as investigate the relevant factors of acupoint property.

Preparation, Structure, and Properties of Polystyrene-Microsphere-Reinforced PEG-Based Hydrogels

To improve the mechanical strength and practicability of hydrogels, polystyrene microspheres with core-shell structure were prepared by the soap-free emulsion polymerization, polyethylene glycol hydrogels with polystyrene microspheres by the in-situ polymerization. The structure, morphology, roughness, swelling property, surface energy, and mechanical properties of the microspheres and hydrogels were investigated by Fourier transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, confocal laser microscopy, swelling test, contact angle measurement, and compression test. The results showed that they have certain swelling capacity and excellent mechanical properties, and can change from hydrophobic to hydrophilic surface. The reason is that the hydrophilic chain segment can migrate, enrich, and form a hydration layer on the surface after soaking for a certain time. Introducing proper content of polystyrene microspheres into the hydrogel, the compressive strength and swelling degree improved obviously. Increasing the content of polystyrene microspheres, the surface energy of the hydrogels decreased gradually.

Molecular Structure, Spectral Investigations, Hydrogen Bonding Interactions and Reactivity-Property Relationship of Caffeine-Citric Acid Cocrystal by Experimental and DFT Approach

The pharmaceutical cocrystal of caffeine-citric acid (CAF-CA, Form II) has been studied to explore the presence of hydrogen bonding interactions and structure-reactivity-property relationship between the two constituents CAF and Citric acid. The cocrystal was prepared by slurry crystallization. Powder X-ray diffraction (PXRD) analysis was done to characterize CAF-CA cocrystal. Also, differential scanning calorimetry (DSC) confirmed the existence of CAF-CA cocrystal. The vibrational spectroscopic (FT-IR and FT-Raman) signatures and quantum chemical approach have been used as a strategy to get insights into structural and spectral features of CAF-CA cocrystal. There was a good correlation among the experimental and theoretical results of dimer of cocrystal, as this model is capable of covering all nearest possible interactions present in the crystal structure of cocrystal. The spectroscopic results confirmed that (O33-H34) mode forms an intramolecular (C25 = O28∙∙∙H34-O33), while (O26-H27) (O39-H40) and (O43-H44) groups form intermolecular hydrogen bonding (O26-H27∙∙∙N24-C22, O39-H40∙∙∙O52 = C51 and O43-H44∙∙∙O86 = C83) in cocrystal due to red shifting and increment in bond length. The quantum theory of atoms in molecules (QTAIM) analysis revealed (O88-H89∙∙∙O41) as strongest intermolecular hydrogen bonding interaction with interaction energy -12.4247 kcal mol-1 in CAF-CA cocrystal. The natural bond orbital analysis of the second-order theory of the Fock matrix highlighted the presence of strong interactions (N∙∙∙H and O∙∙∙H) in cocrystal. The HOMO-LUMO energy gap value shows that the CAF-CA cocrystal is more reactive, less stable and softer than CAF active pharmaceutical ingredients. The electrophilic and nucleophilic reactivities of atomic sites involved in intermolecular hydrogen bond interactions in cocrystal have been demonstrated by mapping electron density isosurfaces over electrostatic potential i.e. plotting molecular electrostatic potential (MESP) map. The molar refractivity value of cocrystal lies within the set range by Lipinski and hence it may be used as orally active form. The results show that the physicochemical properties of CAF-CA cocrystal are enhanced in comparison to CAF (API).

Patient data ownership: who owns your health?

This article answers two questions from the perspective of United Kingdom law and policy: (i) is health information property? and (ii) should it be? We argue that special features of health information make it unsuitable for conferral of property rights without an extensive system of data-specific rules, like those that govern intellectual property. Additionally, we argue that even if an extensive set of rules were developed, the advantages of a property framework to govern health information would be slight: propertization is unlikely to enhance patient self-determination, increase market efficiency, provide patients a foothold in the data economy, clarify legal uses of information, or encourage data-driven innovation. The better approach is to rely less, not more, on property. We recommend a regulatory model with four signature features: (i) substantial protection for personal health data similar to the GDPR with transparent limits on how, when, and by whom patient data can be accessed, used, and transmitted; (ii) input from relevant stakeholders; (iii) interoperability; and (iv) greater research into a health-data service, rather than goods, model.

Examining the power of the social imaginary through competing narratives of data ownership in health research

This article explores the social imaginary in the context of data ownership and the (non-)delivery of the data sharing revolution in biomedicine. We contribute to this special issue on imaginaries by developing a method and paradigm of 'competing narratives'. Despite multiple initiatives to encourage health data sharing, and a strong 'open access' agenda, the data sharing revolution is not yet delivered. Ownership is persistently (though inconsistently) presented as a barrier to data sharing. However, existing literature does not reveal how far appeals to ownership are part of the problem. This paper reports original, interdisciplinary research asking: in health research, in what ways, if at all, do notions of ownership (broadly conceived) of health-related data impact on sharing practices? Doctrinal and empirical research methods are used to expose evidence of drivers behind appeals to ownership in health data sharing. The findings speak to how funders and data custodians can better tailor existing and potential data sharing initiatives to perspectives and behaviors. The concept of 'my data' is important: notions of reward, opportunity, control, and safeguarding establish legitimate, potentially competing 'ownership' interests in data. In particular, this research raises questions about the long-term effectiveness of an open access ideology that ignores these subtleties. In conclusion we find power in the social imaginary of ownership with respect to biomedical data; however, that power emerges and is enacted in unexpected ways by multiple actors within the ecosystem, often driven by competing narratives about what is at stake. Importantly, formal legal property-type appeals to ownership appear to have far less power in the narratives about data than the ethical and social concerns that underpin responsible biomedical research.

A novel extraction approach and unique physicochemical properties of gelatin from the swim bladder of sturgeon

BACKGROUND

Gelatin is traditionally produced from mammals and widely applied in the food industry. The production is tedious, time-consuming and environment-unfriendly, while the application is restricted because of zoonosis risk and religious sentiment.

RESULTS

Gelatin was extracted by hot water from sturgeon swim bladder after defatting with alcohol and hexane. The yield reached to 94.15% under the optimized conditions of 50 °C, 30 min and 10 mL g^-1 . Its amino acid and subunit profiles were similar to type I collagen. Compared to commercial porcine, bovine and piscine gelatins, it exhibited higher whiteness (3.38), emulsion activity (171.76 m² g^-1 ), gel strength (853.23 g), water-holding capacity (92.37%) and viscoelasticity (0.03). But the transmittance (40.56% at 450 nm and 59.07% at 620 nm), emulsion stability (30.09 min), foam expansion (203.00) and stability (26.92), gelling (16.88 °C) and melting temperature (21.80 °C) were lower. While the pH (6.87) and viscosity (28.60 mPa s) were moderate. Moreover, it made better hydrogels and nanofibers.

CONCLUSION

Gelatin was extracted from sturgeon swim bladder using a clean and efficient approach, and exhibited unique properties and great potential for the food industry. © 2020 Society of Chemical Industry.

Review about the Application of Fractal Theory in the Research of Packaging Materials

The work is intended to summarize the recent progress in the work of fractal theory in packaging material to provide important insights into applied research on fractal in packaging materials. The fractal analysis methods employed for inorganic materials such as metal alloys and ceramics, polymers, and their composites are reviewed from the aspects of fractal feature extraction and fractal dimension calculation methods. Through the fractal dimension of packaging materials and the fractal in their preparation process, the relationship between the fractal characteristic parameters and the properties of packaging materials is discussed. The fractal analysis method can qualitatively and quantitatively characterize the fractal characteristics, microstructure, and properties of a large number of various types of packaging materials. The method of using fractal theory to probe the preparation and properties of packaging materials is universal; the relationship between the properties of packaging materials and fractal dimension will be a critical trend of fractal theory in the research on properties of packaging materials.

Beyond property or beyond Piketty?

Capital and Ideology represents a significant further statement from Thomas Piketty. The arguments made by the "New Piketty" are largely compatible with those of his previous Capital in the Twenty-First Century, but reflect broadening of scope and deepening of causal analysis, most markedly through the adoption of a world historical perspective. The result is a fuller offering for understanding inequality's pattern in the world, why it exists and how we can best respond to it. The book presents a wide range of arguments, which do not on first glance appear unified. This review essay distills these into six propositions, describes and evaluates each in turn, and identifies some threads that link them. In the process, it provides a critical assessment of Capital and Ideology.

Cross-Species Annotation of Expressed Genes and Detection of Different Functional Gene Modules Between 10 Cold- and 10 Hot-Propertied Chinese Herbal Medicines

According to the traditional Chinese medicine (TCM) system, Chinese herbal medicines (HMs) can be divided into four categories: hot, warm, cold, and cool. A cool nature usually is categorized as a cold nature, and a warm nature is classified as a hot nature. However, the detectable characteristics of the gene expression profile associated with the cold and hot properties have not been studied. To address this question, a strategy for the cross-species annotation of conserved genes was established in the present study by using transcriptome data of 20 HMs with cold and hot properties. Functional enrichment analysis was performed on group-specific expressed genes inferred from the functional genome of the reference species (i.e., Arabidopsis). Results showed that metabolic pathways relevant to chrysoeriol, luteolin, paniculatin, and wogonin were enriched for cold-specific genes, and pathways of inositol, heptadecane, lauric acid, octanoic acid, hexadecanoic acid, and pentadecanoic acid were enriched for hot-specific genes. Six functional modules were identified in the HMs with the cold property: nucleotide biosynthetic process, peptidy-L-cysteine S-palmitoylation, lipid modification, base-excision repair, dipeptide transport, and response to endoplasmic reticulum stress. For the hot HMs, another six functional modules were identified: embryonic meristem development, embryonic pattern specification, axis specification, regulation of RNA polymerase II transcriptional preinitiation complex assembly, mitochondrial RNA modification, and cell redox homeostasis. The research provided a new insight into HMs’ cold and hot properties from the perspective of the gene expression profile of plants.

Biological role of GITR/GITRL in attributes and immune responses of macrophage

Glucocorticoid-induced tumor necrosis factor receptor family-related protein ligand (GITRL), a member of the tumor necrosis factor superfamily, is expressed in APCs and acts as a costimulatory molecule in the immune system. Although the glucocorticoid-induced tumor necrosis factor receptor-related protein (GITR)/GITRL system has been modulated to promote or decrease T cell-related responses in multiple diseases, studies in macrophages are limited. To address this issue, we compared the expression of GITRL in various types of macrophages and analyzed whether GITRL can affect the fundamental properties and major functions of these cells. Our results demonstrated that M1 polarized macrophages had the highest GITRL levels. Furthermore, GITRL overexpression skewed macrophage polarization toward the M1 phenotype, accelerating proliferation and migration and regulating phagocytosis and killing function. Moreover, GITRL-silenced cells showed a loss of these functions, further confirming its vital role. We also developed an acute peritonitis mouse model, in which macrophages were driven to differentiate into a proinflammatory phenotype with GITRL up-regulation, triggering a positive feedback loop. Our results provide molecular insight into how the GITR/GITRL system modulates innate immune responses, suggesting that manipulation of the GITR/GITRL system to treat diseases depends not only on T cell regulation but also on macrophage participation.