Synthesis of AMPSA Polymeric Derivatives Monitored by Electrical Conductivity and Evaluation of Thermosensitive Properties of Resulting Microspheres

Four stimuli-responsive polymers of N-isopropylacrylamide (NIPA) and 2-acrylamido-2-methyl-1-propanesulfonic acid (AMPSA) and crosslinked derivatives by N,N′-methylene bisacrylamide (MBA) were synthesized: PNA, PAMPSA, PNAM, PAMPSAM. The effect of the cross-linker and methyl sulphonic acid (-CH₃-SO₃H) group on particle size, aggregation and volume phase transition temperature (VPTT) was investigated. Polymeric particles were synthesized via the surfactant free precipitation polymerization (SFPP) at 70 °C in the presence of cationic initiator 2,2′-azobis[2-methylpropionamidine] dihydrochloride (AMP) system. Chemical composition and morphology of investigated samples were evaluated using ATR-FTIR spectroscopy, ¹H-NMR spectrometry and SEM-EDS techniques. The hydrodynamic diameters (HD), zeta potential (ZP), and polydispersity index (PDI) in aqueous dispersions were assessed by dynamic light scattering (DLS) between 18–42 °C. HD values at 18 °C for PNA, PAMPSA, PNAM, PAMPSAM polymers were approx. 32, 730, 715, 665 nm, and ZP values were −1.36, −0.01, 8.90, −0.09 mV, respectively. The VPTT range was observed between 29 and 41 °C. PDI’s for PNA and PNAM were low and varied between 0.276 and 0.460, and between 0.119 and 0.056, respectively. PAMPSA and PAMPSAM were characterized by higher PDI in the range 0.728–0.959 and 0.658–0.836, respectively. The results confirmed the thermal sensitivity of the synthesized polymers and indicated a significant polydispersity and aggregation tendency of the resulting molecules. The conductivity results were applied for the interpretation of the polymerization process.

Hybridization of graphene oxide into nanogels to acquire higher photothermal effects for therapeutic delivery

Although the special architecture of two-dimensional (2D) nanomaterials endows them with unique properties, their poor colloidal stability remains a main bottleneck to fully exploit their applications in the biomedical field. Herein, this study aims to develop a simple and effective approach to in situ incorporate 2D graphene oxide (GO) nanoplatelets into a thermosensitive matrix to acquire hybrid nanogels with good stability and photothermal effect. In order to improve its stability, GO firstly underwent silanization to its surface with double bonds, followed by intercalation with N-isopropylacrylamide (NIPAM) in the presence of a disulfide-containing crosslinker via an emulsion method. Radical polymerization was then initiated to accelerate direct GO exfoliation in PNIPAM nanogels by forming covalent bonds between them. The well-dispersed GO nanopletlets in the nanogels not only displayed an enhanced photothermal effect, but also improved the encapsulation efficiency of an anticancer drug. The hybrid nanogels accelerate drug release under conditions mimicking the acidic/reducible solid tumor and intracellular microenvironments, most importantly, it can be further enhanced via remote photothermal treatment. The multifunctional nanogels potentiate their synergistic anticancer bioactivity as an ideal nanoplatform for cancer treatment.

In Situ Growth of a Cationic Polymer from the N-Terminus of Glucose Oxidase To Regulate H2O2 Generation for Cancer Starvation and H2O2 Therapy

Hydrogen peroxide (H₂O₂)-generating enzymes (HGEs) are potentially useful for tumor therapy, but the potential is limited by the challenge in regulating H₂O₂ production. Herein, we present site-specific in situ growth of a cationic polymer poly( N, N'-dimethylamino-2-ethyl methacrylate) (PDMA) from the N-terminus of glucose oxidase (GOX) to generate a site-specific and cationic GOX-PDMA conjugate with well-retained activity and enhanced stability to regulate H₂O₂ generation for cancer starvation and H₂O₂ therapy. Notably, the efficiency of endocytosis of the conjugate was 4-fold higher than that of free GOX. As a result, relative to free GOX, the conjugate showed 1.5-fold increased cytotoxicity, 2-fold enhanced tumor retention, and 5-fold increased tolerability after intratumoral injection. Importantly, a single intratumoral injection of the conjugate completely abolished colon tumors without detectable side effects, whereas free GOX was ineffective and systemically toxic. This chemistry may provide a new, simple, general, and efficient solution to regulate H₂O₂ production and thereby to dramatically improve the antitumor efficacy of HGEs while reducing side effects.

The Development of a Macromolecular Analgesic for Arthritic Pain

The addictive potential of clinically used opioids as a result of their direct action on the dopaminergic reward system in the brain has limited their application. In an attempt to reduce negative side effects as well as to improve the overall effectiveness of these analgesics, we have designed, synthesized, and evaluated an N-(2-hydroxypropyl)methacrylamide (HPMA)-based macromolecular prodrug of hydromorphone (HMP), a commonly used opioid. To this end, P-HMP was synthesized via RAFT polymerization and a subsequent polymer analogous reaction. Its interaction with inflammatory cells in arthritic joints was evaluated in vitro using a RAW 264.7 cell culture, and subsequent confocal microscopy analysis confirmed that P-HMP could be internalized by the cells via endocytosis. In vivo imaging studies indicated that the prodrug can passively target the arthritic joint after systemic administration in a rodent model of monoarticular adjuvant-induced arthritis (MAA). The inflammatory pain-alleviating properties of the prodrug were assessed in MAA rats using the incapacitance test and were observed to be similar to dose-equivalent HMP. Analgesia through mechanisms at the spinal cord level was further measured using the tail flick test, and it was determined that the prodrug significantly reduced spinal cord analgesia versus free HMP, further validating the peripheral restriction of the macromolecular prodrug. Immunohistochemical analysis of cellular uptake of the P-HMP within the MAA knee joint proved the internalization of the prodrug by phagocytic synoviocytes, colocalized with HMP's target receptor as well as with pain-modulating ion channels. Therefore, it can be concluded that the novel inflammation-targeting polymeric prodrug of HMP (P-HMP) has the potential to be developed as an effective and safe analgesic agent for musculoskeletal pain.

Protecting Enzymatic Activity via Zwitterionic Nanocapsulation for the Removal of Phenol Compound from Wastewater

Horseradish peroxidase (HRP) holds great potential in wastewater treatment. However, its instability in harsh environments remains a major issue. Various immobilization technologies were developed to retain enzyme stability at the cost of its effectiveness. We demonstrate that zwitterionic encapsulation of HRP retained both protein stability and activity to a large degree. In a water treatment study, encapsulating HRP into a zwitterionic nanogel resulted in a three-fold increase in the catalytic oxidation efficiency of phenol molecules. In addition, zwitterionic nanocapsules exhibited the best performance when compared with nanocapsules made from other hydrophilic polymers. These results indicated that zwitterionic HRP nanocapsules hold great potential in the decontamination of organic pollutants from wastewater.

A dynamic DNA nanostructure with switchable and size-selective molecular recognition properties

Herein, we report a dynamic DNA nanostructure exhibiting switchable and size-selective molecular recognition properties. A DNA block copolymer, polystyrene-b-DNA (PS-b-DNA), and a thermo-responsive block copolymer, PS-b-poly(N-isopropylacrylamide) (PS-b-PNIPAM), were simultaneously assembled to form hybrid micelles composed of a PS core and a DNA/PNIPAM corona. PNIPAM strands did not significantly hinder the binding of molecular DNA for a broad range of PNIPAM lengths. On the other hand, they exerted significant steric hindrance for interactions with nanoscale species, which can be reversibly turned off by increasing the temperature above the lower critical solution temperature (LCST) of PNIPAM. Owing to the switchable and size-selective steric hindrance, the hybrid DNA micelles showed thermally controllable enzymatic degradation and cellular uptake. These results demonstrate that the binary self-assembly of two different responsive block copolymers is a promising approach to prepare dynamic nanostructures with controllable biological recognition properties.

Sulfonated Copolymers as Heparin-Mimicking Stabilizer of Fibroblast Growth Factor: Size, Architecture, and Monomer Distribution Effects

Fibroblast growth factors (FGF) are involved in a wide range of biological processes such as cell proliferation and differentiation. In living organisms, the binding of FGF to its receptors are mediated through electrostatic interactions between FGF and naturally occurring heparin. Despite its prevalent use in medicine, heparin carries notable limitations; namely, its extraction from natural sources (expensive, low yield and extensive purification), viral contamination, and batch-to-batch heterogeneity. In this work a range of synthetic homopolymers and copolymers of sodium 2-acrylamido-2-methylpropanesulfonate were evaluated as potential FGF stabilizers. This was studied by measuring the proliferation of BaF3-FR1c cells, as a model assay, and the results will be compared with the natural stabilization and activation of FGF by heparin. This study explores the structure-activity relationship of these polysulfonated polymers with a focus on the effect of molecular weight, comonomer type, charge dispersion, and polymer architecture on protein stabilization.

Polymer-Nanoparticle Interaction as a Design Principle in the Development of a Durable Ultrathin Universal Binary Antibiofilm Coating with Long-Term Activity

Bacterial attachment and biofilm formation pose major challenges to the optimal performance of indwelling devices. Current coating methods have significant deficiencies including the lack of long-term activity, easy of application, and adaptability to diverse materials. Here we describe a coating method that could potentially overcome such limitations and yield an ultrathin coating with long-term antibiofilm activity. We utilized the interaction between polydopamine (PDA) nanoaggregates/nanoparticles and ultrahigh molecular weight (uHMW) hydrophilic polymers to generate stable coatings with broad spectrum antibiofilm activity. We used a short-term bacterial adhesion assay as an initial screening method to identify coating compositions that give superior performance and found that only selected polymers (out of 13 different types) and molecular weights gave promising antifouling activity. Optimization of PDA self-assembly, polymer-PDA interaction, and deposition on the surface using uHMW poly( N,N-dimethylacrylamide) (PDMA) (∼795 kDa) resulted in a stable ultrathin coating (∼19 nm) with excellent antifouling and antibiofilm properties (>4 weeks) against diverse bacteria (∼10⁸ CFU/mL) in shaking and flow conditions. The ultrathin coating is effective on diverse substrates including metals and polymeric substrates. The uHMW PDMA is stabilized in the coating via supramolecular interactions with PDA and generated a surface that is highly enriched with PDMA in aqueous conditions. Based on the surface analyses data, we also propose a mechanism for the stable coating formation. The molecular weight of PDMA is a crucial factor, and only uHMW polymers generate this property. An attractive feature of the coating is that it does not contain any antimicrobial agents and has the potential to prevent biofilm formation for diverse applications both short- and long-term.

Glycopolymer Grafted Silica Gel as Chromatographic Packing Materials

The modification of the surface of silica gel to prepare hydrophilic chromatographic fillers has recently become a research interest. Most researchers have grafted natural sugar-containing polymers onto chromatographic surfaces. The disadvantage of this approach is that the packing structure is singular and the application scope is limited. In this paper, we explore the innovative technique of grafting a sugar-containing polymer, 2-gluconamidoethyl methacrylamide (GAEMA), onto the surface of silica gel by atom transfer radical polymerization (ATRP). The SiO₂-g-GAEMA with ATRP reaction time was characterized by Fourier infrared analysis, Thermogravimetric analysis (TGA), and elemental analysis. As the reaction time lengthened, the amount of GAEMA grafted on the surface of the silica gel gradually increased. The GAEMA is rich in amide bonds and hydroxyl groups and is a typical hydrophilic chromatography filler. Finally, SiO₂-g-GAEMA (reaction time = 24 h) was chosen as the stationary phase of the chromatographic packing and evaluated with four polar compounds (uracil, cytosine, guanosine, and cytidine). Compared with unmodified silica gel, modified silica gel produces sharper peaks and better separation efficiency. This novel packing material may have a potential for application with highly isomerized sugar mixtures.

Sequestering and inhibiting a vascular endothelial growth factor in vivo by systemic administration of a synthetic polymer nanoparticle

Protein affinity reagents (PARs), frequently antibodies, are essential tools for basic research, diagnostics, separations and for clinical applications. However, there is growing concern about the reproducibility, quality and cost of recombinant and animal-derived antibodies. This has prompted the development of alternatives that could offer economic, and time-saving advantages without the use of living organisms. Synthetic copolymer nanoparticles (NPs), engineered with affinity for specific protein targets, are potential alternatives to PARs. Although there are now a number of examples of abiotic protein affinity reagents (APARs), most have been evaluated in vitro limiting a realistic assessment of their potential for more demanding, practical in vivo applications. We demonstrate for the first time that an abiotic copolymer hydrogel nanoparticle (NP1) engineered to bind a key signaling protein, vascular endothelial growth factor (VEGF₁₆₅), functions in vivo to suppress tumor growth by regulating angiogenesis. Lightly cross-linked N-isopropylacrylamide based NPs that incorporate both sulfated N-acetylglucosamine and hydrophobic monomers were optimized by dynamic chemical evolution for VEGF₁₆₅ affinity. NP1 efficacy in vivo was evaluated by systemic administration to tumor-bearing mice. The study found that NP1 suppresses tumor growth and reduces tumor vasculature density. Combination therapy with doxorubicin resulted in increased doxorubicin concentration in the tumor and dramatic inhibition of tumor growth. NP1 treatment did not show off target anti-coagulant activity. In addition, >97% of injected NPs are rapidly excreted from the body following IV injection. These results establish the use of APARs as inhibitors of protein-protein interactions in vivo and may point the way to their broader use as abiotic, cost effective protein affinity reagents for the treatment of certain cancers and more broadly for regulating signal transduction.

Gelatin-based hydrogels as potential biomaterials for colonic delivery of oxaliplatin

In present investigation, gelatin-based (AA-co-AMPS) hydrogels were prepared using N, N'-Methylenebisacrylamide (MBA) as a cross-linker and ammonium per sulfate (APS) as an initiator. The successful crosslinking and network formation was confirmed by Fourier transform infrared spectroscopy (FT IR). Differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) investigations proved the higher thermal stability and successful entrapment of oxaliplatin (OXP) in the polymeric network. X-ray diffraction (XRD) confirmed the loss in crystallinity of the drug after loading in the hydrogel. Scanning electron microscopy (SEM) revealed the porous surface of the hydrogel. The newly formed hydrogels were responsive to change in pH. The swelling, drug loading and drug release was increased with increase in concentration of acrylic acid (AA) while gelatin and 2-acrylamido 2-methylpronesulfonic acid (AMPS) were found to act inversely. The in-vitro enzymatic degradation study showed that the blank hydrogels were more stable against the blank PBS than the collagenase and lysozyme. MTT-assay proved that the blank hydrogels were cyto-compatible while free OXP as well as OXP-loaded hydrogels showed dose dependent controlled cytotoxicity against Vero, MCF-7 and HCT-116 cell lines. The preliminary safety evaluation and oral tolerability showed that the hydrogel suspension was biocompatible and well tolerable upto 4000 mg/kg of body weight without causing any hematological or histopathological changes in rabbits.

Biomimetic Polymer-Based Method for Selective Capture of C-Reactive Protein in Biological Fluids

Selective capturing and purification of C-reactive protein (CRP) from complex biological fluids plays a pivotal role in studying biological activities of CRP in various diseases. However, obvious nonspecific adsorption of proteins was observed on current affinity sorbents, and thus additional purification steps are often required, which could compromise the recovery of the target protein and/or introduce new impurities. In this study, inspired by the highly specific interaction between CRP and the cell membrane, an excellent anti-biofouling compound 2-(methacryloyloxy)ethyl phosphorylcholine and a highly hydrophilic crosslinker N, N'-methylenebisacrylamide were employed to fabricate a novel cell membrane biomimetic polymer for selective capture of CRP in the presence of calcium ions. Based on the polymer described above, a facile enrichment approach was established after systematic optimization of the washing and elution conditions. With its favorable properties, such as good porosity, weak electrostatic interaction, high hydrophilicity, and biocompatibility, the novel biomimetic polymer exhibits good specificity, selectivity, recovery (near 100%), purity (95%), and a lower nonspecific protein adsorption for CRP in comparison with commercial immobilized p-aminophenyl phosphoryl choline gel and other purification materials. Furthermore, the structural integrity and functionality of CRP in the elution fraction were well preserved and confirmed by circular dichroism spectroscopy, fluorescence spectroscopy, and immunoturbidimetric assay. Finally, the biomimetic polymer was successfully applied to the selective enrichment of CRP from sera of patients with inflammation and rats. The proposed novel enrichment approach based on the versatile biomimetic polymer can be used for effective CRP purification, which will benefit the in-depth study of its biological roles.

NIPAM-based Microgel Microenvironment Regulates the Therapeutic Function of Cardiac Stromal Cells

To tune the chemical, physical, and mechanical microenvironment for cardiac stromal cells to treat acute myocardial infarction (MI), we prepared a series of thermally responsive microgels with different surface charges (positive, negative, and neutral) and different degrees of hydrophilicity, as well as functional groups (carboxyl, hydroxyl, amino, and methyl). These microgels were used as injectable hydrogels to create an optimized microenvironment for cardiac stromal cells (CSCs). Our results indicated that a hydrophilic and negatively charged microenvironment created from poly( N-isopropylacrylamide- co-itaconic acid) was favorable for maintaining high viability of CSCs, promoting CSC proliferation and facilitating the formation of CSC spheroids. A large number of growth factors, such as vascular endothelial growth factor (VEGF), insulin-like growth factor I (IGF-1), and stromal-derived factor-1 (SDF-1) were released from the spheroids, promoting neonatal rat cardiomyocyte activation and survival. After injecting the poly( N-isopropylacrylamide- co-itaconic acid) microgel into mice, we examined their acute inflammation and T-cell immune reactions. The microgel itself did not elicit obvious immune response. We then injected the same microgel-encapsulated with CSCs into MI mice. The result revealed the treatment-promoted MI heart repair through angiogenesis and inhibition of apoptosis with an improved cell retention rate. This study will open a door for tailoring poly( N-isopropylacrylamide)-based microgel as a delivery vehicle for CSC therapy.

Multifunctional and Programmable Modulated Interface Reactions on Proteinosomes

A multiresponsive microcapsule has been synthesized by incorporating photoswitchable spiropyran units and the thermoresponsive monomer N-isopropylacrylamide into membrane lumens. By using functionalized light or thermoresponsive groups, this multifunctional microcapsule can modulate programmed release and interface reactions between lipase and fluorescein diacetate, alkaline phosphatase and fluorescein diphosphate, and others. Exposing this multifunctional microcapsule in a programmed controlled way allowed us to develop schematics to understand complicated interface interactions on protocells.

Poly(N-isopropylacrylamide-co-2-((diethylamino)methyl)-4-formyl-6-methoxyphenyl acrylate) Environmental Functional Copolymers: Synthesis, Characterizations, and Grafting with Amino Acids

Vanillin was used to synthesize a new derivative with an active aldehyde group and response to pH. It is named 2-((diethylamino) methyl)-4-formyl-6-methoxyphenyl acrylate, abbreviated to DEAMVA. The chemical structures were evaluated by ¹H, 13C nuclear magnetic resonance (NMR), infrared (IR), and UV-Vis-spectroscopy, and all results demonstrated good statement. In order to achieve the dual responsive behavior thermo-pH with functionality, free radical polymerization of N-isopropylacrylamide with DEAMVA in different molar ratios (5, 10, 15 mol%) has been used, with azobisisobutyronitrile (AIBN) as the initiator. The chemical structure of the polymers was investigated by ¹H NMR and IR. The dual responsive functional copolymer was exposed to a grafted process with tryptophan and tyrosine, both of which were also evaluated by ¹HNMR and IR. Copolymers before and after grafting were physically investigated by size exclusion chromatography (SEC) for estimation of the molecular weight, the glass transition temperature by differential scanning calorimeter (DSC) and scanning electron microscope (SEM) for the surface morphology. The phase separation or lower critical solution temperature (LCST) (Tc) of the polymer solution was determined not only by a turbidity method using the change in the transmittance with temperature, but also by micro-DSC. The conversion to an amino acid-grafted polymer was detected through Beer's law for the absorption of the ⁻CH=N- imine group by UV-Vis-Spectroscopy.

pH-Sensitive Co-Adsorption/Release of Doxorubicin and Paclitaxel by Carbon Nanotube, Fullerene, and Graphene Oxide in Combination with N-isopropylacrylamide: A Molecular Dynamics Study

Nanotechnology based drug delivery systems for cancer therapy have been the topic of interest for many researchers and scientists. In this research, we have studied the pH sensitive co-adsorption and release of doxorubicin (DOX) and paclitaxel (PAX) by carbon nanotube (CNT), fullerene, and graphene oxide (GO) in combination with N-isopropylacrylamide (PIN). This simulation study has been performed by use of molecular dynamics. Interaction energies, hydrogen bond, and gyration radius were investigated. Results reveal that, compared with fullerene and GO, CNT is a better carrier for the co-adsorption and co-release of DOX and PAX. It can adsorb the drugs in plasma pH and release it in vicinity of cancerous tissues which have acidic pH. Investigating the number of hydrogen bonds revealed that PIN created many hydrogen bonds with water resulting in high hydrophilicity of PIN, hence making it more stable in the bloodstream while preventing from its accumulation. It is also concluded from this study that CNT and PIN would make a suitable combination for the delivery of DOX and PAX, because PIN makes abundant hydrogen bonds and CNT makes stable interactions with these drugs.

Chemotherapeutic Efficacy of Implantable Antineoplastic-Treatment Protocols in an Optimal Mouse Model for Human Ovarian Carcinoma Cell Targeting

The present study aimed to design and develop a nanocomposite drug delivery system employing an antineoplastic-loaded antibody functionalized nanomicelle encapsulated within a Chitosan⁻Poly(vinylpyrrolidone)⁻Poly(N-isopropylacrylamide) (C⁻P⁻N) hydrogel to form an in situ forming implant (ISFI), responsive to temperature and pH for cancer cell-targeting following intraperitoneal implantation. The optimum nanomicelle formulation was surface-functionalized with anti-MUC 16 (antibody) for the targeted delivery of methotrexate to human ovarian carcinoma (NIH:OVCAR-5) cells in Athymic nude mice that expressed MUC16, as a preferential form of intraperitoneal ovarian cancer (OC) chemotherapy. The cross-linked interpenetrating C⁻P⁻N hydrogel was synthesized for the preparation of an in situ-forming implant (ISFI). Subsequently, the ISFI was fabricated by encapsulating a nanocomposite comprising of anti-MUC16 (antibody) functionalized methotrexate (MTX)-loaded poly(N-isopropylacrylamide)-b-poly(aspartic acid) (PNIPAAm-b-PASP) nanomicelles (AF(MTX)NM's) within the cross-linked C⁻P⁻N hydrogel. This strategy enabled specificity and increased the residence time of the nanomicelles at tumor sites over a period exceeding one month, enhancing uptake of drugs and preventing recurrence and chemo-resistance. Chemotherapeutic efficacy was tested on the optimal ovarian tumor-bearing Athymic nude mouse model and the results demonstrated tumor regression including reduction in mouse weight and tumor size, as well as a significant (p < 0.05) reduction in mucin 16 levels in plasma and ascitic fluid, and improved survival of mice after treatment with the experimental anti-MUC16/CA125 antibody-bound nanotherapeutic implant drug delivery system (ISFI) (p < 0.05). The study also concluded that ISFI could potentially be considered an important immuno-chemotherapeutic agent that could be employed in human clinical trials of advanced, and/or recurring, metastatic epithelial ovarian cancer (EOC). The development of this ISFI may circumvent the treatment flaws experienced with conventional systemic therapies, effectively manage recurrent disease and ultimately prolong disease-free intervals in ovarian cancer patients.

Synthesis of magnetic functionalized MWCNT nanocomposite through surface RAFT co-polymerization of acrylic acid and N-isopropyl acrylamide for removal of cationic dyes from aqueous solutions

In this study, magnetic multi-walled carbon nanotube (MMWCNT) composites were prepared via surface reversible addition fragmentation chain transfer (RAFT) co-polymerization of acrylic acid (AA) and N-isopropyl acrylamide (NIPAM) in the presence of Fe₃O₄ nanoparticles. First, a novel RAFT agent (RA) was prepared and then immobilized onto the surface of MWCNT to fabricate RA-g-MWCNT. Then, Fe₃O₄ nanoparticles were attached onto the surface of RA-g-MWCNT. Finally, RAFT co-polymerization of AA and NIPAM monomers was carried out via Fe₃O₄-g-RA-g-MWCNT RAFT agent. The structure and morphology of the prepared polymer-coated MWCNT was examined by FTIR, SEM, TEM, XRD, VSM, and TGA. The adsorption behaviours of the cationic dyes were studied. The equilibrium isotherm and kinetics of cationic dyes were investigated. Thermodynamics investigations also depicted that the adsorptions of cationic dyes were spontaneous and endothermic in nature. The synthesized dye adsorbent with high adsorption capacities, reusability, and easy recovery makes it as a good candidate for wastewater treatment.

In Situ Synthesis of a Silver-Containing Superabsorbent Polymer via a Greener Method Based on Carboxymethyl Celluloses

An antibacterial superabsorbent polymer (SAP) was synthesized by grafting acrylic acid (AA) onto carboxymethyl cellulose (CMC) and mixing with silver particles, with N,N'-methylenebisacrylamide used as a crosslinker and potassium persulfate as an initiator. Silver nanoparticles were produced through the reaction between glucose and silver nitrate. The effects of the amount of silver nitrate added in the polymer on the swelling ratio were investigated and the maximum swelling ratio of the SAP loaded with silver particles in distilled water and in a 0.9 wt % NaCl solution reached 840 g/g and 71 g/g, respectively, when the silver nitrate added was 50 mg. The SAP was characterized by Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, ultraviolet-visible spectroscopy, scanning electron microscopy, energy dispersive spectrometry, transmission electron microscopy, and thermogravimetric analysis. Through these analysis methods, it could be seen that the acrylic acid was successfully grafted onto CMC, forming a three-dimensional network structure, with the successful production of silver nanoparticles with sizes ranging from 5 nm to 50 nm. Moreover, the antibacterial properties of the SAP loaded with silver nanoparticles against Staphylococcus aureus and Escherichia coli were investigated and the results show that they became more effective with increasing silver nitrate concentration. The obtained SAP can be useful in developing new antibacterial medical and public health supplies.

Superfast and Reversible Thermoresponse of Poly( N-isopropylacrylamide) Hydrogels Grafted on Macroporous Poly(vinyl alcohol) Formaldehyde Sponges

Poly( N-isopropylacrylamide) (PNIPAAm), a typical thermoresponsive polymer, exhibits potential application in smart materials. However, bulk PNIPAAm hydrogel monoliths undergo slow volume phase transition at least tens of minutes to hours as determined by the shape and size of polymers due to the formation of the skin layer. In this regard, novel macroporous sponges with rapid thermoresponse are prepared via grafting polymerization of N-isopropylacrylamide (NIPAAm) onto the macroporous poly(vinyl alcohol) formaldehyde (PVF) network as confirmed by attenuated total reflection-infrared (ATR IR) and ¹H NMR spectra. As prepared PVF- g-PNIPAAm sponges display interconnected open-cell structures, and their average pore sizes and porosities are ∼90 μm and >85%, respectively. The equilibrium swelling ratio of PVF- g-PNIPAAm sponges varies from 11 to 50 with temperature. The volume phase transition temperature is at 30-34 °C, as detected in the DSC curves of swollen samples. These features indicate that the existence of the original PVF network exerts almost no influence on the PNIPAAm temperature responsibility. As prepared samples can reach the swelling equilibrium in less than 80 s, and their rapid swelling kinetics can be fitted using the pseudo-first-order rate kinetic equation. Notably, the samples also display rapid deswelling rate in less than 40 s at relative high temperature (48 °C), thereby indicating a superfast responsive behavior to temperature change. The PVF- g-PNIPAAm sponges exhibit rapid and reversible thermoresponse in repeatable swelling-deswelling cycles, which can satisfy the need of special smart materials. In particular, combined with iodine solution (i.e., PVF- g-PNIPAAm/I₂), these sponges can serve as a novel temperature indicator and exhibit excellent antibacterial performances.

Light-Triggered Drug Release from 3D-Printed Magnetic Chitosan Microswimmers

Advances in design and fabrication of functional micro/nanomaterials have sparked growing interest in creating new mobile microswimmers for various healthcare applications, including local drug and other cargo ( e. g., gene, stem cell, and imaging agent) delivery. Such microswimmer-based cargo delivery is typically passive by diffusion of the cargo material from the swimmer body; however, controlled active release of the cargo material is essential for on-demand, precise, and effective delivery. Here, we propose a magnetically powered, double-helical microswimmer of 6 μm diameter and 20 μm length that can on-demand actively release a chemotherapeutic drug, doxorubicin, using an external light stimulus. We fabricate the microswimmers by two-photon-based 3D printing of a natural polymer derivative of chitosan in the form of a magnetic polymer nanocomposite. Amino groups presented on the microswimmers are modified with doxorubicin by means of a photocleavable linker. Chitosan imparts the microswimmers with biocompatibility and biodegradability for use in a biological setting. Controlled steerability of the microswimmers is shown under a 10 mT rotating magnetic field. With light induction at 365 nm wavelength and 3.4 × 10^-1 W/cm² intensity, 60% of doxorubicin is released from the microswimmers within 5 min. Drug release is ceased by controlled patterns of light induction, so as to adjust the desired release doses in the temporal domain. Under physiologically relevant conditions, substantial degradation of the microswimmers is shown in 204 h to nontoxic degradation products. This study presents the combination of light-triggered drug delivery with magnetically powered microswimmer mobility. This approach could be extended to similar systems where multiple control schemes are needed for on-demand medical tasks with high precision and efficiency.

Dually Gated Polymersomes for Gene Delivery

An ideal gene carrier requires an excellent gating system to efficiently load, protect, deliver, and release environmentally sensitive nucleic acids on demand. Presented in this communication is a polymersome with a "boarding gate" and a "debarkation gate" in the membrane to complete the above important missions. This dually gated polymersome is self-assembled from a block copolymer, poly(ethylene oxide)- block-poly[ N-isopropylacrylamide- stat-7-(2-methacryloyloxyethoxy)-4-methylcoumarin- stat-2-(diethylamino)ethyl methacrylate] [PEO- b-P(NIPAM- stat-CMA- stat-DEA)]. The hydrophilic PEO chains form the coronas of the polymersome, whereas the temperature and pH-sensitive P(NIPAM- stat-CMA- stat-DEA) block forms the dually gated heterogeneous membrane. The temperature-controlled "boarding gate" can be opened at room temperature for facile encapsulation of siRNA and plasmid DNA into polymersomes directly in aqueous solution. The "debarkation gate" can be triggered by proton sponge effect for intracellular release. Biological studies confirmed the successful encapsulation of siRNA and plasmid DNA, efficient in vitro and in vivo gene transfection, and the expression of green fluorescent protein (GFP) from GFP-encoding plasmid, suggesting that this kind of polymersome with a dual gating system can serve as an excellent biomacromolecular shuttle for gene delivery and other biological applications.

Preparation and study of the antibacterial ability of graphene oxide-catechol hybrid polylactic acid nanofiber mats

The functionalization of electrospun mats with antimicrobial nanomaterials is an attractive strategy when developing functional graphene oxide coating materials to prevent bacterial colonization on surfaces. In this study, we demonstrated a simple approach to produce antimicrobial electrospun mats by dip-coating a polylactic acid (PLA) nanofiber into a graphene oxide-catechol derivative. PLA was first electrospun to yield narrow-diameter polymeric nanofibers. We then modified the graphene oxide (GO) with a catechol derivative - dopamine methacrylamide monomer (DMA) - to synthesize a GO-DMA nanocomposite material which exhibited robust antimicrobial properties. The catechol groups promote the immobilization of graphene oxide onto the PLA nanofibers and possess strong antimicrobial properties. We therefore selected this functional group to modify GO. We dipped the GO-DMA onto the PLA nanofiber to produce the final functionalized electrospun mats. The PLA mats which were functionalized using the GO-DMA nanocomposite (PLA-GO-DMA) displayed antibacterial activity against both Gram-negative (Escherichia coli) and Gram-positive (Staphylococcus aureus) bacteria. Furthermore, we studied the biocompatibility of the mats by culturing the cell lines (HepG2, A549, and HUVEC-C) of PLA-GO-DMA among the nanofibers which exhibited excellent biocompatibility. These results collectively demonstrate the potential of PLA-GO-DMA nanofiber mats as antimicrobial biomaterials and provide fundamental information toward the establishment of future biomedical applications.

Cross-Linked Aptamer-Lipid Micelles for Excellent Stability and Specificity in Target-Cell Recognition

The specific binding ability of DNA-lipid micelles (DLMs) can be increased by the introduction of an aptamer. However, supramolecular micellar structures based on self-assemblies of amphiphilic DLMs are expected to demonstrate low stability when interacting with cell membranes under certain conditions, which could lead to a reduction in selectivity for targeting cancer cells. We herein report a straightforward cross-linking strategy that relies on a methacrylamide branch to link aptamer and lipid segments. By an efficient photoinduced polymerization process, covalently linked aptamer-lipid units help stabilize the micelle structure and enhance aptamer probe stability, further improving the targeting ability of the resulting nanoassembly. Besides the development of a facile cross-linking method, this study clarifies the relationship between aptamer-lipid concentration and the corresponding binding ability.

Ultrasensitive (Co)polymers Based on Poly(methacrylamide) Structure with Fining-Tunable pH Responsive Value

Novel pH responsive copolymers with tertiary amine groups were prepared by free radical polymerization with 2-(dialkylamino)ethyl methacrylate monomers. These polymers were pH sensitive with the ability to be responsively fine-tuned in aqueous solution, which was proven through titration, transmittance measurements, and proton nuclear magnetic resonance spectroscopy. The polymers were soluble in water at low pH values, induced by electrostatic repulsion between amine groups, and aggregated above their pKa value due to the hydrophobic effect of the alkyls. The pH responsive values were precisely tuned from 7.4 to 4.8 by increasing the hydrophobic monomer ratio. Our work provides a novel approach for the development of ultrasensitive pH-responsive polymers for application in biomedical materials.

Mesoporous magnetic silica particles modified with stimuli-responsive P(NIPAM-DMA) valve for controlled loading and release of biologically active molecules

Mesoporous magnetic silica particles bearing a stimuli-responsive polymer valve were prepared and their performance as a microcapsule was evaluated. In this study, first, mesoporous magnetic iron oxide (Fe3O4) particles were prepared by a solvothermal method. Then, the magnetic particles were coated with silica and functionalized with vinyl groups using 3-(trimethoxysilyl)-propyl methacrylate (MPS). Subsequently, the Fe3O4/SiO2 composite particles grafted with MPS were used to carry out the seeded precipitation copolymerization of N-isopropylacrylamide (NIPAM) and 2,2-dimethylaminoethyl methacrylate (DMA). Here N,N'-methylenebisacrylamide (MBA) was used as a cross-linker. Brunauer-Emmett-Teller (BET) surface analysis suggested that the mesoporous structure was retained in the final Fe3O4/SiO2/P(NIPAM-DMA-MBA) composite hydrogel particles. The prepared Fe3O4/SiO2/P(NIPAM-DMA-MBA) composite hydrogel microspheres exhibited a pH-dependent volume phase transition. At lower pH values (<7), the inclusion of DMA shifted the volume phase transition to higher temperature because of the protonation of the tertiary amine groups. The composite hydrogel particles possessed a high saturation magnetization (51 emu g-1) and moved under the influence of an external magnetic field. The loading-release behaviour of these biologically active molecules suggested that a portion of the encapsulated guest molecules was released at a temperature below the lower critical solution temperature, LCST (<35 °C).

LAT1-Targeting Thermoresponsive Fluorescent Polymer Probes for Cancer Cell Imaging

L-type amino acid transporter 1 (LAT1) is more highly expressed in cancer cells compared with normal cells. LAT1 targeting probes would therefore be a promising tool for cancer cell imaging. In this study, LAT1-targeting thermoresponsive fluorescent polymer probes based on poly(N-isopropylacrylamide-co-N,N-dimethylacrylamide) (P(NIPAAm-co-DMAAm)) were synthesized and their affinity for LAT1 was evaluated. The synthesized polymer probes interacted with LAT1 on HeLa cells, and inhibition of l-[³H]-leucine, one of the substrates for LAT1 uptake, was investigated. l-Tyrosine-conjugated P(NIPAAm-co-DMAAm) inhibited the uptake of l-[³H]-leucine, while P(NIPAAm-co-DMAAm) and l-phenylalanine-conjugated P(NIPAAm-co-DMAAm) did not. This result indicated that l-tyrosine-conjugated polymer has a high affinity for LAT1. The fluorescent polymer probes were prepared by modification of a terminal polymer group with fluorescein-5-maleimide (FL). Above the polymer transition temperature, cellular uptake of the polymer probes was observed because the polymers became hydrophobic, which enhanced the interaction with the cell membrane. Furthermore, quantitative analysis of the fluorescent probe using flow cytometry indicated that l-tyrosine-conjugated P(NIPAAm-co-DMAAm)-FL shows higher fluorescence intensity earlier than P(NIPAAm-co-DMAAm)-FL. The result suggested that cellular uptake was promoted by the LAT1 affinity site. The developed LAT1-targeting thermoresponsive fluorescent polymer probes are expected to be useful for cancer cell imaging.

Thermosensitive Injectable Hydrogel for Simultaneous Intraperitoneal Delivery of Doxorubicin and Prevention of Peritoneal Adhesion

To improve intraperitoneal chemotherapy and to prevent postsurgical peritoneal adhesion, we aimed to develop a drug delivery strategy for controlled release of a chemotherapeutic drug from the intraperitoneally injected thermosensitive poly(N-isopropylacrylamide)-based hydrogel (HACPN), which is also endowed with peritoneal anti-adhesion properties. Anticancer drug doxorubicin (DOX) was loaded into the hydrogel (HACPN-DOX) to investigate the chemotherapeutic and adhesion barrier effects in vivo. A burst release followed by sustained release of DOX from HACPN-DOX was found due to gradual degradation of the hydrogel. Cell culture studies demonstrated the cytotoxicity of released DOX toward CT-26 mouse colon carcinoma cells in vitro. Using peritoneal carcinomatosis animal model in BALB/c mice with intraperitoneally injected CT-26 cells, animals treated with HACPN-DOX revealed the best antitumor efficacy judging from tumor weight and volume, survival rate, and bioluminescence signal intensity when compared with treatment with free DOX at the same drug dosage. HACPN (or HACPN-DOX) also significantly reduced the risk of postoperative peritoneal adhesion, which was generated by sidewall defect-cecum abrasion in tumor-bearing BALB/c mice, from gross and histology analyses. This study could create a paradigm to combine controlled drug release with barrier function in a single drug-loaded injectable hydrogel to enhance the intraperitoneal chemotherapeutic efficacy while simultaneously preventing postsurgical adhesion.

A novel hydrophobically-modified polyelectrolyte for enhanced dewatering of clay suspension

This work investigates the effect of multifunctional poly (N-isopropyl acrylamide/acrylic acid/N-tert-butylacrylamide) [p(NIPAM-AA-NTBA)] ternary polymer on the sedimentation of kaolin clay - a major fraction of oil sands tailings. A series of linear, uncross-linked p(NIPAM), p(NIPAM/AA), and p(NIPAM/AA/NTBM) were synthesized as random copolymers, where all monomer units were randomly arranged along the polymer backbone and connected by covalent bonds. The ternary copolymer, used as a flocculant, exhibited thermo-sensitivity, anionic nature, and hydrophobic association due to NIPAM, AA, and NTBM, respectively. As the ternary polymer is thermosensitive, it undergoes extended to coil-like conformation, i.e. hydrophilic to hydrophobic transition, above its lower critical solution temperature (LCST). The comonomers NIPAM (above LCST) and NTBM help expel water out of sediments due to their hydrophobicity, while AA promotes charge neutralization of the kaolin clay particles. The effect of number average molecular weight, charge density, and concentration of NTBM on settling behavior of kaolin suspension was examined. Settling test at 50 °C resulted in significantly higher settling rates compared to that at room temperature. Further, the quality of water recovered in each experiment was tested in terms of its turbidity. These results indicate that this novel ternary polymer can be employed to enhance the recovery of water from oil sands tailings containing clays.

SPECTROSCOPIC STUDY ON POLY(ACRYLIC ACID-CO-ACRYLAMIDE)-GRAFT-POLYANILINE AS A RADIATION DOSIMETER FOR ALPHA PARTICLES

Poly(acrylate-co-acrylamide) was a synthesis by chemical oxidation polymerization of an aqueous binary mixture of acrylate/acrylamide (1:1 mole ratio) using ammonium persulphate as an initiator at 70°C under the nitrogen atmosphere. The obtained copolymer was introduced for grafting with polyaniline. The grafting process was performed by chemical oxidation polymerization of aniline using ammonium persulphate as an initiator in hydrochloric acid media at 40°C under the nitrogen atmosphere. Poly(acrylic acid-co-acrylamide)-graft-polyaniline samples irradiated with (alpha-particles) at different irradiation doses (0, 2.33, 8.73, 13.09 and 17.46 Gy) at the same linear energy transfer. The change in the morphology, optical properties and the energy gap of poly(acrylic acid-co-acrylamide)-graft-polyaniline samples were studied.

A new composite of graphene and molecularly imprinted polymer based on ionic liquids as functional monomer and cross-linker for electrochemical sensing 6-benzylaminopurine

Molecularly imprinted polymers prepared using traditional functional monomers and cross-linkers exhibit slow binding kinetics, low electrocatalytic activity and adsorption capacity. Herein, we report a new composite of ionic liquid-based graphene and molecularly imprinted polymer (IL-GR-MIP) with high electrocatalytic activity and adsorption capacity to construct an effective electrochemical sensor for 6-benzylaminopurine (6-BAP). Our objective was to enhance the efficiency of the sensor by incorporating more IL in the MIP framework. We synthesized IL-GR-MIP using ionic liquid 1-vinyl-3-butylimidazolium tetrafluoroborate (IL₁) as functional monomer, ionic liquid 1,4-butanediyl-3,3'-bis-l-vinylimidazolium dibromide (IL₂) as cross-linker, 6-BAP as template, and GR as supporter. IL-GR-MIP was characterized by Fourier transform infrared spectroscopy, thermal gravimetric analysis, Raman spectroscopy, X-ray photoelectron spectroscopy, and scanning electron microscope. Compared with GR-MIP composites based on methacrylic acid or IL₁ as functional monomer, N, N'-methylenebisacrylamide and ethylene glycol dimethacrylate as cross-linker, the IL-GR-MIP (prepared with ionic liquids as functional monomer and cross-linker) sensor exhibited highest peak current for 6-BAP. The results indicate the ability of IL₂ as cross-linker to enhance electrocatalytic activity and adsorption capacity for 6-BAP of IL-GR-MIP. Under the optimized conditions, the peak current of IL-GR-MIP sensor was linear to 6-BAP concentration in the range of 0.5-50 μM with a detection limit of 0.2 μM (S/N = 3). The IL-GR-MIP sensor exhibited good selectivity with the anti-interference ability of 1000-fold ascorbic acid in 6-BAP determination. Furthermore, we demonstrated practical applicability of IL-GR-MIP sensor in detecting 6-BAP in real samples with satisfactory results.

Synthesis and characterization of arginine-NIPAAm hybrid hydrogel as wound dressing: In vitro and in vivo study

A multi-functional hybrid hydrogel P(M-Arg/NIPAAm) with temperature response, anti-protein adsorption and antibacterial properties was prepared and applied as wound dressing. The hydrogel was carried out by free radical copolymerization of methacrylate arginine (M-Arg) and N-isopropyl acrylamide (NIPAAm) monomers using N,N'-methylene bisacrylamide as a crosslinker, and ammonium persulfate/N,N,N', N'-tetramethylethylenediamine as the redox initiator. To endow the antimicrobial property, chlorhexidine diacetate (CHX) was preloaded into the hydrogel and polyhexamethylene guanidine phosphate (PHMG) was grafted on the hydrogel surface, respectively. The antimicrobial property of two series of hydrogels was evaluated and compared. The successful synthesis of M-Arg, PHMG and hydrogels was proved by ¹³C NMR, ¹H NMR and FTIR spectroscopy. The hydrogel morphology characterized by scanning electron microscopy confirmed that the homogeneous porous and interconnected structures of the hydrogels. The swelling, protein adsorption property, in vitro release of CHX, antimicrobial assessment, cell viability as well as in vivo wound healing in a mouse model were studied. The results showed the nontoxicity and antimicrobial P(M-Arg/NIPAAm) hydrogel accelerated the full-thickness wound healing process and had the potential application in wound dressing.

STATEMENT OF SIGNIFICANCE

Despite the zwitterionic characteristic and biocompatible property of arginine based hydrogels, the brittle behavior and non-transparency still remain as a significant problem for wound dressing. Furthermore promoting the antibacterial property of the zwitterionic hydrogel is also necessary to prevent the bacterial colonization and subsequent wound infection. Therefore, we created a hybrid hydrogel combined methacrylate arginine (M-Arg) and N-isopropyl acrylamide (NIPAAm). NIPAAm improves transparency and mechanical property as well as acts as a temperature-response drug release system. Additionally, chlorhexidine (CHX) was preloaded into the hydrogels and polyhexamethylene guanidine phosphate (PHMG) was grafted on the hydrogel surface, respectively, which make the hydrogel useful as a favorable antibacterial dressing. The hybrid hydrogel has a combination effect of biocompatibility, environmentally responsive transformation behavior, biodegradability, anti-protein adsorption and antimicrobial properties. This report proposes the preparation of P(M-Arg/NIPAAm) hydrogel that has a great potential for wound healing.

Biological activity of Entada phaseoloides and Entada rheedei

The aim of our study is to find functional compounds from natural resources. We focus on plants grown in tropical areas, especially Madagascar and Thailand, because they have unique flora and are expected to contain interesting compounds. We review the functional compounds of the seed kernels of Entada phaseoloides and E. rheedei and their biological activities such as anti-proliferation and melanogenesis inhibitory properties, etc.

Extracellular Hyaluronic Acid Influences the Efficacy of EGFR Tyrosine Kinase Inhibitors in a Biomaterial Model of Glioblastoma

3D biomaterial models have potential to explore the influence of the tumor microenvironment on aberrant signaling pathways and compensatory signals using patient-derived cells. Glioblastoma (GBM) tumors are highly heterogeneous, with both cell composition and extracellular matrix biophysical factors seen as key regulators of malignant phenotype and treatment outcomes. Amplification, overexpression, and mutation of the epidermal growth factor receptor (EGFR) tyrosine kinase have been identified in 50% of GBM patients. Here, hyaluronic acid (HA) decorated methacrylamide-functionalized gelatin (GelMA) hydrogels are used to examine the synergies between microenvironmental factors and a model EGFR tyrosine kinase inhibitor (TKI) using patient-derived xenograft cells. The in vitro behavior of 3 patient-derived xenografts that reflect a clinically relevant range of EGFR variants is characterized: GBM10 (EGFR, wild type), GBM12 (EGFR+), and GBM6 (EGFRvIII). GelMA hydrogels support xenograft culture; cells remain viable, active, respond to matrix-immobilized HA, and upregulate genes associated with matrix remodeling and tumor growth. Interestingly, matrix-immobilized HA alters the response of GBM cells to a model tyrosine kinase inhibitor, erlotinib. While constitutively activated EGFRvIII cells are sensitive to TKI in gelatin hydrogels, hyaluronic acid mediated adhesive signaling interacts with EGFRvIII signaling to increase cell metabolic activity, increase soluble hyaluronic acid synthesis, and modify response to erlotinib exposure.

Heart Repair Using Nanogel-Encapsulated Human Cardiac Stem Cells in Mice and Pigs with Myocardial Infarction

Stem cell transplantation is currently implemented clinically but is limited by low retention and engraftment of transplanted cells and the adverse effects of inflammation and immunoreaction when allogeneic or xenogeneic cells are used. Here, we demonstrate the safety and efficacy of encapsulating human cardiac stem cells (hCSCs) in thermosensitive poly(N-isopropylacrylamine-co-acrylic acid) or P(NIPAM-AA) nanogel in mouse and pig models of myocardial infarction (MI). Unlike xenogeneic hCSCs injected in saline, injection of nanogel-encapsulated hCSCs does not elicit systemic inflammation or local T cell infiltrations in immunocompetent mice. In mice and pigs with acute MI, injection of encapsulated hCSCs preserves cardiac function and reduces scar sizes, whereas injection of hCSCs in saline has an adverse effect on heart healing. In conclusion, thermosensitive nanogels can be used as a stem cell carrier: the porous and convoluted inner structure allows nutrient, oxygen, and secretion diffusion but can prevent the stem cells from being attacked by immune cells.

Structural analysis of photocrosslinkable methacryloyl-modified protein derivatives

Biochemically modified proteins have attracted significant attention due to their widespread applications as biomaterials. For instance, chemically modified gelatin derivatives have been widely explored to develop hydrogels for tissue engineering and regenerative medicine applications. Among the reported methods, modification of gelatin with methacrylic anhydride (MA) stands out as a convenient and efficient strategy to introduce functional groups and form hydrogels via photopolymerization. Combining light-activation of modified gelatin with soft lithography has enabled the materialization of microfabricated hydrogels. So far, this gelatin derivative has been referred to in the literature as gelatin methacrylate, gelatin methacrylamide, or gelatin methacryloyl, with the same abbreviation of GelMA. Considering the complex composition of gelatin and the presence of different functional groups on the amino acid residues, both hydroxyl groups and amine groups can possibly react with methacrylic anhydride during functionalization of the protein. This can also apply to the modification of other proteins, such as recombinant human tropoelastin to form MA-modified tropoelastin (MeTro). Here, we employed analytical methods to quantitatively determine the amounts of methacrylate and methacrylamide groups in MA-modified gelatin and tropoelastin to better understand the reaction mechanism. By combining two chemical assays with instrumental techniques, such as proton nuclear magnetic resonance (1H NMR) and liquid chromatography tandem-mass spectrometry (LC-MS/MS), our results indicated that while amine groups had higher reactivity than hydroxyl groups and resulted in a majority of methacrylamide groups, modification of proteins by MA could lead to the formation of both methacrylamide and methacrylate groups. It is therefore suggested that the standard terms for GelMA and MeTro should be defined as gelatin methacryloyl and methacryloyl-substituted tropoelastin, respectively, to remain consistent with the widespread abbreviations used in literature.

Controllable synthesis Fe3O4@POHABA core-shell nanostructure as high-performance recyclable bifunctional magnetic antimicrobial agent

We demonstrated a method to form magnetic antimicrobial POHABA (poly-N,N'-[(4,5-dihydroxy-1,2-phenylene)bis(methylene)]bisacrylamide)-based core-shell nanostructure by free-radical polymerization of OHABA on the Fe₃O₄ core surface. The magnetic antimicrobial agent Fe₃O₄@POHABA can be used in domestic water treatment against bacterial pathogens. The thickness of POHABA shell could be controlled from 10.4 ± 1.2 to 56.3 ± 11.7 nm by the dosage of OHABA. The results of antimicrobial-activity test indicated that POHABA-based core-shell nanostructure had broad-spectrum inhibitory against Gram-negative, Gram-positive bacteria and fungi. The minimum inhibitory concentration (MIC) values of Fe₃O₄@POHABA nanostructure against Escherichia coli and Bacillus subtilis were both 0.4 mg/mL. Fe₃O₄@POHABA nanostructures responded to a permanent magnet and were easily recycled. Fe₃O₄@POHABA nanoparticles retained 100% antimicrobial efficiency for both Gram-negative and Gram-positive bacteria throughout eight recycle procedures.

Synthesis and swelling property of superabsorbent starch grafted with acrylic acid/2-acrylamido-2-methyl-1-propanesulfonic acid

BACKGROUND

In order to develop starch-based superabsorbent polymers (SAPs) with high water absorbency, both acrylic acid (AA) and 2-acrylamido-2-methyl-1-propanesulfonic acid (AMPS) were graft copolymerized onto cassava starch, and St-g-AA-AMPS SAP was successfully synthesized. The effect of AA/AMPS molar ratio on the structure and swelling property of SAP was investigated.

RESULTS

Introduction of AMPS units improved the storage modulus and crosslinking density of St-g-AA-AMPS SAP, and was beneficial in forming a perfect network structure. With increasing AMPS content, the equilibrium swelling ratio and swelling rate constant (k) of the SAP first increased and then decreased, and the maximum swelling ratio reached 1200.0 and 90.0 g/g in distilled water and brine respectively, resulting from the high ionization constant and hydrophilic ability of AMPS, and improved tolerance to brine. By introducing AMPS units, the re-swelling capability of SAP was improved, and more hydrogen bonds could form between molecules of water and SAP, leading to an increase in non-freezing bound water and freezing bound water, and the water retention of SAP was enhanced.

CONCLUSION

Introduction of AMPS units improved the water absorption capacity, swelling rate, and water retention ability of St-g-AA-AMPS SAP, presenting wide application potential in agriculture and horticulture of desert regions. © 2017 Society of Chemical Industry.

Characterizing Single Polymeric and Protein Nanoparticles with Surface Plasmon Resonance Imaging Measurements

Near-infrared surface plasmon resonance imaging (SPRI) microscopy is used to detect and characterize the adsorption of single polymeric and protein nanoparticles (PPNPs) onto chemically modified gold thin films in real time. The single-nanoparticle SPRI responses, Δ%RNP, from several hundred adsorbed nanoparticles are collected in a single SPRI adsorption measurement. Analysis of Δ%RNP frequency distribution histograms is used to provide information on the size, material content, and interparticle interactions of the PPNPs. Examples include the measurement of log-normal Δ%RNP distributions for mixtures of polystyrene nanoparticles, the quantitation of bioaffinity uptake into and aggregation of porous NIPAm-based (N-isopropylacrylamide) hydrogel nanoparticles specifically engineered to bind peptides and proteins, and the characterization of the negative single-nanoparticle SPRI response and log-normal Δ%RNP distributions obtained for three different types of genetically encoded gas-filled protein nanostructures derived from bacteria.

pH responsive N-succinyl chitosan/Poly (acrylamide-co-acrylic acid) hydrogels and in vitro release of 5-fluorouracil

There has been significant progress in the last few decades in addressing the biomedical applications of polymer hydrogels. Particularly, stimuli responsive hydrogels have been inspected as elegant drug delivery systems capable to deliver at the appropriate site of action within the specific time. The present work describes the synthesis of pH responsive semi-interpenetrating network (semi-IPN) hydrogels of N-succinyl-chitosan (NSC) via Schiff base mechanism using glutaraldehyde as a crosslinking agent and Poly (acrylamide-co-acrylic acid)(Poly (AAm-co-AA)) was embedded within the N-succinyl chitosan network. The physico-chemical interactions were characterized by Fourier transform infrared (FTIR), X-ray diffraction (XRD), thermogravimetric analysis (TGA), and field emission scanning electron microscope (FESEM). The synthesized hydrogels constitute porous structure. The swelling ability was analyzed in physiological mediums of pH 7.4 and pH 1.2 at 37°C. Swelling properties of formulations with various amounts of NSC/ Poly (AAm-co-AA) and crosslinking agent at pH 7.4 and pH 1.2 were investigated. Hydrogels showed higher swelling ratios at pH 7.4 while lower at pH 1.2. Swelling kinetics and diffusion parameters were also determined. Drug loading, encapsulation efficiency, and in vitro release of 5-fluorouracil (5-FU) from the synthesized hydrogels were observed. In vitro release profile revealed the significant influence of pH, amount of NSC, Poly (AAm-co-AA), and crosslinking agent on the release of 5-FU. Accordingly, rapid and large release of drug was observed at pH 7.4 than at pH 1.2. The maximum encapsulation efficiency and release of 5-FU from SP2 were found to be 72.45% and 85.99%, respectively. Kinetics of drug release suggested controlled release mechanism of 5-FU is according to trend of non-Fickian. From the above results, it can be concluded that the synthesized hydrogels have capability to adapt their potential exploitation as targeted oral drug delivery carriers.

Gelatin methacrylamide hydrogel with graphene nanoplatelets for neural cell-laden 3D bioprinting

Nervous system is extremely complex which leads to rare regrowth of nerves once injury or disease occurs. Advanced 3D bioprinting strategy, which could simultaneously deposit biocompatible materials, cells and supporting components in a layer-by-layer manner, may be a promising solution to address neural damages. Here we presented a printable nano-bioink composed of gelatin methacrylamide (GelMA), neural stem cells, and bioactive graphene nanoplatelets to target nerve tissue regeneration in the assist of stereolithography based 3D bioprinting technique. We found the resultant GelMA hydrogel has a higher compressive modulus with an increase of GelMA concentration. The porous GelMA hydrogel can provide a biocompatible microenvironment for the survival and growth of neural stem cells. The cells encapsulated in the hydrogel presented good cell viability at the low GelMA concentration. Printed neural construct exhibited well-defined architecture and homogenous cell distribution. In addition, neural stem cells showed neuron differentiation and neurites elongation within the printed construct after two weeks of culture. These findings indicate the 3D bioprinted neural construct has great potential for neural tissue regeneration.

Enhanced antitumor activity of surface-modified iron oxide nanoparticles and an α-tocopherol derivative in a rat model of mammary gland carcinosarcoma

Maghemite (γ-Fe2O3) nanoparticles were obtained by coprecipitation of ferrous and ferric salts in an alkaline medium followed by oxidation; the nanoparticles were coated with poly(N,N-dimethylacrylamide) (PDMA) and characterized by transmission electron microscopy, attenuated total reflection (ATR) Fourier transform infrared (FTIR) spectroscopy, dynamic light scattering, thermogravimetric and elemental analyses, and magnetic measurements in terms of particle morphology, size, polydispersity, amount of coating, and magnetization, respectively. The effects of α-tocopherol (Toc) and its phenolic (Toc-6-OH) and acetate (Toc-6-Ac) derivatives on Fe2+ release from γ-Fe2O3@PDMA, as well as from γ-Fe2O3 and CuFe2O4 nanoparticles (controls), were examined in vitro using 1,10-phenanthroline. The presence of tocopherols enhanced spontaneous Fe2+ release from nanoparticles, with Toc-6-OH exhibiting more activity than neat Toc. All of the nanoparticles tested were found to initiate blood lipid oxidation in a concentration-dependent manner, as determined by analysis of 2-thiobarbituric acid reactive species. Wistar rats with Walker-256 carcinosarcoma (a model of mammary gland carcinosarcoma) received Toc-6-Ac, magnetic nanoparticles, or their combination per os, and the antitumor activity of each treatment was determined in vivo. γ-Fe2O3@PDMA nanoparticles exhibited increased antitumor activity compared to both commercial CuFe2O4 particles and the antitumor drug doxorubicin. Moreover, increased antitumor activity was observed after combined administration of γ-Fe2O3@PDMA nanoparticles and Toc-6-Ac; however, levels of bilirubin, aspartate aminotransferase, and white bloods normalized and did not differ from those of the intact controls. The antitumor activity of the γ-Fe2O3 nanoparticles strongly correlated with Fe2+ release from the nanoparticles but not with nanoparticle-initiated lipid peroxidation in vitro.

A Robust Method to Generate Mechanically Anisotropic Vascular Smooth Muscle Cell Sheets for Vascular Tissue Engineering

In arterial tissue engineering, mimicking native structure and mechanical properties is essential because compliance mismatch can lead to graft failure and further disease. With bottom-up tissue engineering approaches, designing tissue components with proper microscale mechanical properties is crucial to achieve the necessary macroscale properties in the final implant. This study develops a thermoresponsive cell culture platform for growing aligned vascular smooth muscle cell (VSMC) sheets by photografting N-isopropylacrylamide (NIPAAm) onto micropatterned poly(dimethysiloxane) (PDMS). The grafting process is experimentally and computationally optimized to produce PNIPAAm-PDMS substrates optimal for VSMC attachment. To allow long-term VSMC sheet culture and increase the rate of VSMC sheet formation, PNIPAAm-PDMS surfaces were further modified with 3-aminopropyltriethoxysilane yielding a robust, thermoresponsive cell culture platform for culturing VSMC sheets. VSMC cell sheets cultured on patterned thermoresponsive substrates exhibit cellular and collagen alignment in the direction of the micropattern. Mechanical characterization of patterned, single-layer VSMC sheets reveals increased stiffness in the aligned direction compared to the perpendicular direction whereas nonpatterned cell sheets exhibit no directional dependence. Structural and mechanical anisotropy of aligned, single-layer VSMC sheets makes this platform an attractive microstructural building block for engineering a vascular graft to match the in vivo mechanical properties of native arterial tissue.

Development of a thermosensitive HAMA-containing bio-ink for the fabrication of composite cartilage repair constructs

Fine-tuning of bio-ink composition and material processing parameters is crucial for the development of biomechanically relevant cartilage constructs. This study aims to design and develop cartilage constructs with tunable internal architectures and relevant mechanical properties. More specifically, the potential of methacrylated hyaluronic acid (HAMA) added to thermosensitive hydrogels composed of methacrylated poly[N-(2-hydroxypropyl)methacrylamide mono/dilactate] (pHPMA-lac)/polyethylene glycol (PEG) triblock copolymers, to optimize cartilage-like tissue formation by embedded chondrocytes, and enhance printability was explored. Additionally, co-printing with polycaprolactone (PCL) was performed for mechanical reinforcement. Chondrocyte-laden hydrogels composed of pHPMA-lac-PEG and different concentrations of HAMA (0%-1% w/w) were cultured for 28 d in vitro and subsequently evaluated for the presence of cartilage-like matrix. Young's moduli were determined for hydrogels with the different HAMA concentrations. Additionally, hydrogel/PCL constructs with different internal architectures were co-printed and analyzed for their mechanical properties. The results of this study demonstrated a dose-dependent effect of HAMA concentration on cartilage matrix synthesis by chondrocytes. Glycosaminoglycan (GAG) and collagen type II content increased with intermediate HAMA concentrations (0.25%-0.5%) compared to HAMA-free controls, while a relatively high HAMA concentration (1%) resulted in increased fibrocartilage formation. Young's moduli of generated hydrogel constructs ranged from 14 to 31 kPa and increased with increasing HAMA concentration. The pHPMA-lac-PEG hydrogels with 0.5% HAMA were found to be optimal for cartilage-like tissue formation. Therefore, this hydrogel system was co-printed with PCL to generate porous or solid constructs with different mesh sizes. Young's moduli of these composite constructs were in the range of native cartilage (3.5-4.6 MPa). Interestingly, the co-printing procedure influenced the mechanical properties of the final constructs. These findings are relevant for future bio-ink development, as they demonstrate the importance of selecting proper HAMA concentrations, as well as appropriate print settings and construct designs for optimal cartilage matrix deposition and final mechanical properties of constructs, respectively.

Enhanced Performance of Blended Polymer Excipients in Delivering a Hydrophobic Drug through the Synergistic Action of Micelles and HPMCAS

Blends of hydroxypropyl methylcellulose acetate succinate (HPMCAS) and dodecyl (C₁₂)-tailed poly(N-isopropylacrylamide) (PNIPAm) were systematically explored as a model system to dispense the active ingredient phenytoin by rapid dissolution, followed by the suppression of drug crystallization for an extended period. Dynamic and static light scattering revealed that C₁₂-PNIPAm polymers, synthesized by reversible addition-fragmentation chain-transfer polymerization, self-assembled into micelles with dodecyl cores in phosphate-buffered saline (PBS, pH 6.5). A synergistic effect on drug supersaturation was documented during in vitro dissolution tests by varying the blending ratio, with HPMACS primarily aiding in rapid dissolution and PNIPAm maintaining supersaturation. Polarized light and cryogenic transmission electron microscopy experiments revealed that C₁₂-PNIPAm micelles maintain drug supersaturation by inhibiting both crystal nucleation and growth. Cross-peaks between the phenyl group of phenytoin and the isopropyl group of C₁₂-PNIPAm in 2D ¹H nuclear Overhauser effect (NOESY) spectra confirmed the existence of drug-polymer intermolecular interactions in solution. Phenytoin and polymer diffusion coefficients, measured by diffusion-ordered NMR spectroscopy (DOSY), demonstrated that the drug-polymer association constant increased with increasing local density of the corona chains, coincident with a reduction in C₁₂-PNIPAm molecular weight. These findings demonstrate a new strategy for exploiting the versatility of polymer blends through the use of self-assembled micelles in the design of advanced excipients.

Effect of Network Density in Surface-Anchored Poly(N-isopropylacrylamide) Hydrogels on Adsorption of Fibrinogen

We describe a simple approach to generate surface-attached biocompatible hydrogels with tunable cross-link density and employ them to study the effect of gel structure on protein adsorption. Using free-radical polymerization, we synthesize a series of random copolymers comprising N-isopropylacrylamide (NIPAm) and the photoactive curing agent 4-methacryloyl-oxy-benzophenone (MABP) of mole fractions ranging from 2.5 to 10%. We deposit a thin film of the precursor copolymer (∼150 nm) on a silicon or glass substrate, which is precoated with monolayers of benzophenone-silane, then cross-link it through UV irradiation at 365 nm (dose ≈ 6-10 J/cm²) to generate surface-attached networks. A systematic investigation of the network properties such as gel fraction, cross-link density, and swelling ratio reveals that gels with higher MABP content (≥5%) produce densely cross-linked hydrophobic networks with low or no swelling in an aqueous medium. We study the adsorption of fibrinogen (Fg) on such hydrogel substrates and establish that the amount of adsorbed Fg depends on the degree of cross-linking and the swelling capacity of the networks. Specifically, although Fg adsorbs heavily on denser networks, loosely bound gels that swell in aqueous medium repel proteins. We attribute the latter behavior to entropic shielding and size-exclusion factors.

Facile fabrication of tissue-engineered constructs using nanopatterned cell sheets and magnetic levitation

We report a simple and versatile method for in vitro fabrication of scaffold-free tissue-engineered constructs with predetermined cellular alignment, by combining magnetic cell levitation with thermoresponsive nanofabricated substratum (TNFS) based cell sheet engineering technique. The TNFS based nanotopography provides contact guidance cues for regulation of cellular alignment and enables cell sheet transfer, while magnetic nanoparticles facilitate the magnetic levitation of the cell sheet. The temperature-mediated change in surface wettability of the thermoresponsive poly(N-isopropylacrylamide), substratum enables the spontaneous detachment of cell monolayers, which can then be easily manipulated through use of a ring or disk shaped magnet. Our developed platform could be readily applicable to production of tissue-engineered constructs containing complex physiological structures for the study of tissue structure-function relationships, drug screening, and regenerative medicine.

Synthesis and characterization of cycloaliphatic hydrophilic polyurethanes, modified with l-ascorbic acid, as materials for soft tissue regeneration

In this paper we described synthesis and characteristic of obtained hydrophilic polyurethanes (PURs) modified with ascorbic acid (commonly known as vitamin C). Such materials may find an application in the biomedical field, for example in the regenerative medicine of soft tissues, according to ascorbic acid wide influence on tissue regeneration Flora (2009), Szymańska-Pasternak et al. (2011), Taikarimi and Ibrahim (2011), Myrvik and Volk (1954), Li et al. (2001), Cursino et al. (2005) . Hydrophilic PURs were obtained with the use of amorphous α,ω-dihydroxy(ethylene-butylene adipate) (dHEBA) polyol, 1,4-butanediol (BDO) chain extender and aliphatic 4,4'-methylenebis(cyclohexyl isocyanate) (HMDI). HMDI was chosen as a nontoxic diisocyanate, suitable for biomedical PUR synthesis. Modification with l-ascorbic acid (AA) was performed to improve obtained PUR materials biocompatibility. Chemical structure of obtained PURs was provided and confirmed by Fourier transform infrared spectroscopy (FTIR) and Proton nuclear magnetic resonance spectroscopy (¹HNMR). Differential scanning calorimetry (DSC) was used to indicate the influence of ascorbic acid modification on such parameters as glass transition temperature, melting temperature and melting enthalpies of obtained materials. To determine how these materials may potentially behave, after implementation in tissue, degradation behavior of obtained PURs in various chemical environments, which were represented by canola oil, saline solution, distilled water and phosphate buffered saline (PBS) was estimated. The influence of AA on hydrophilic-hydrophobic character of obtained PURs was established by contact angle study. This experiment revealed that ascorbic acid significantly improves hydrophilicity of obtained PUR materials and the same cause that they are more suitable candidates for biomedical applications. Good hemocompatibility characteristic of studied PUR materials was confirmed by the hemocompatibility test with human blood. Microbiological tests were carried out to indicate the microbiological sensitivity of obtained PURs. Results of performed studies showed that obtained AA-modified PUR materials may find an application in soft tissue regeneration.

Enhanced Swelling and Responsive Properties of Pineapple Peel Carboxymethyl Cellulose-g-poly(acrylic acid-co-acrylamide) Superabsorbent Hydrogel by the Introduction of Carclazyte

The superabsorbent hydrogels were synthesized by grafting acrylic acid and acrylamide onto pineapple peel carboxymethyl cellulose and effect of carclazyte introduction was compared. The structure and morphology of the superabsorbents were investigated by Fourier transform infrared spectroscopy, X-ray diffraction, and field emission scanning electron microscopy. Swelling behaviors of the superabsorbents were investigated in distilled water, 0.9% NaCl solution, various salt and pH solutions, as well as surfactant solutions and simulated physiological fluids. The swelling dynamic mechanism of the superabsorbents was explained well by Fickian diffusion and Schott's pseudo-second-order models. The introduction of carclazyte effectively improved the swelling capacity of the superabsorbents in various solutions as well as its salt- and pH-sensitivity. The prepared superabsorbents also exhibited excellent sensitivities to various surfactant solutions and simulated physiological fluids, showing potential applications in the biomaterials field.