Testing the homogenizing effect of low copper sulfate concentrations on the size distribution of Portulaca oleracea seedlings in vitro

Traditionally, toxicological bioassays rely upon the differences in mean-based statistical tests between the exposed and unexposed plants, and exceptional plant individuals are treated as statistical outliers. Recently, low toxicant concentrations have been observed to affect gene regulation in exposed plant stands and to change the frequency of the largest individuals even if mean plant size remains unchanged. In this paper, we present the results that the latter phenomenon is not restricted to a single toxicant and plant species. Our data analysis consists of two statistical methods that may be of general interest. We utilized the one-tailed Moses extreme reactions test by comparing exposed groups to control plants with and without the trimming of a certain amount of potential outliers from both treatments compared. We also propose that Mann-Whitney U or other tests at ordinal scale can be utilized to analyze if the largest plant individuals in exposed and control treatments come from a single 'survivor' population. We conclude that the results supported the hypothesis that very low toxicant concentrations may have ecological effects on fast-growing plant species. Finally, we discuss the limitations of the statistical methods currently in use.

Diversity-oriented synthesis of benzimidazole, benzoxazole, benzothiazole and quinazolin-4(3H)-one libraries via potassium persulfate-CuSO4-mediated oxidative coupling reactions of aldehydes in aqueous micelles

Libraries of 2-substituted-benzimidazoles, benzoxazoles, benzothiazoles as well as quinazolin-4(3H)-ones were synthesized via potassium persulfate-CuSO(4)-mediated oxidative coupling of aldehydes with o-phenylenediamines, o-aminophenols, o-aminothiophenols, and anthranilamide, respectively, in aqueous micelles. The strategy opens a way for rapid generation of libraries of small heterocycles for biological screening. The reagent is commercially available, cheap, and highly chemoselective. The yields were superior in aqueous micelles to those in organic solvents. Short reaction times, large-scale synthesis, excellent chemoselectivity, excellent yields, as well as environmental friendliness are the main advantages of this diversity-oriented synthesis.

Impact of elevated copper on the rate and gaseous products of denitrification in freshwater sediments

Application of Cu-containing algicides to water reservoirs for algal control leads to sediment Cu enrichment, but the impact of Cu accumulation on the NO(3)(-)-attenuation capacity of these ecosystems is uncertain. With the knowledge that the reduction of N(2)O to N(2) is mediated by a Cu-dependent enzyme, it is hypothesized that an inverse variation exists between Cu availability and the mole fraction of N(2)O (F(N2O)) in denitrification products. A study was conducted to test this hypothesis and also to assess the impact of elevated Cu on nitrification and denitrification. Sediments were collected from areas untreated (NCT) and treated (CT) with the algicide cutrine (Cu ethanolamine) in three central Indiana reservoirs, and were assayed at both in situ Cu content and after amendment with CuSO(4). Results showed that Cu addition had a depressive, but short-lived effect on the processes investigated, with nitrification being most sensitive. Past cutrine treatments did not significantly affect either denitrification or F(N2O). However, a significant difference (P < 0.04) among reservoirs was found with respect to denitrification (Eagle Creek: 3.2; Geist: 1.6 and Morse: 4.2 mg N kg(-1) h(-1)) and F(N2O) (0.51, 0.24, and 0.31, respectively). Negative relationships (r(2): 0.30-0.64) between F(N2O) and water extractable Cu were found only when the analysis was conducted separately for each reservoir, suggesting that Cu solubility is controlled by sediment properties specific to each reservoir. Overall, results of this study indicate that neither the NO(3)(-)-removal capacity of sediments nor the composition of denitrification N gases is affected by past treatments with cutrine.

Additional amplifications of SERS via an optofluidic CD-based platform

In this paper, signal amplifications of surface-enhanced Raman scattering (SERS) are realized by an optofluidic compact disc (CD)-based preconcentration method for effective label-free environmental and biomolecular detections. The preconcentration of target molecules is accomplished through the accumulation of adsorbed molecules on SERS-active sites by repeating a 'filling-drying' cycle of the assay solution in the optofluidic CD platform. After 30 cycles, the clear and high SERS signal of rhodamine 6G of 1 nM is readily detected. In addition to the preconcentration-based signal amplification by the optofluidic SERS system on the CD platform, we introduce a controlled precipitation of gold nanoparticles by CuSO4 for SERS substrates. This method provides high-throughput, high-sensitive and large-area uniform SERS substrates on the optofluidic CD platform. The uniform SERS signals from different positions in spots of 3 mm2 on the different CDs gives us confidence in the reliability and stability of our SERS substrates.

Magnetic-resonance evaluation of the suitability of microstructured polymer optical fibers as sensors for ionic aqueous solutions

Nuclear magnetic resonance was used to probe the distribution of water and ionic species in a microstructured poly(methyl methacrylate) (PMMA) polymer optical fiber (MPOF), with a plan to assess the suitability of these fibers for aqueous chemosensing. The NMR spectra and the measurements of proton spin relaxation in hydrated fibers demonstrated the presence of two distinct pools of water: water residing in the microstructure channels and the hydration water residing in the polymer matrix of the fiber. No facile chemical exchange between these two pools was present. The NMR peaks of the two pools of water were separated by 1.53 ppm. Relaxation measurements of the fiber samples doped with aqueous copper sulfate showed that charged ions freely entered the microstructure channels but were completely excluded from the polymer matrix of the fiber. Measurements of the apparent diffusion coefficient of water along the axial direction of the fiber showed that water molecules moved unimpeded along the channels. This is the first reported magnetic-resonance study of microstructured optical fibers. The findings suggest that microstructured PMMA fibers are compatible with ionic aqueous solutions and could provide a robust and durable platform for chemical-sensing applications.

Formation of copper nanowires by electroless deposition using microtubules as templates

Microtubules (MTs) are self-assembling, protein-based, tubular structures several micrometers long with outer and inner diameters of 25 nm and 15 nm, respectively. This aspect ratio makes MTs ideal templates for producing nanowires for applications such as electrical nano-interconnects. MTs are poorly conductive and their use as interconnects necessitates their metallization. We report a process for metallization of MTs with copper using a biologically benign electroless deposition chemistry consisting of copper sulfate solution containing acetic acid as a complexant and ascorbic acid as reducing agent. The pH of the plating bath is controlled such that copper metallization occurs without disassembling the MTs. Electron microscopic characterization of the morphology and dimensions of the copper nanowires shows that metallization for approximately 1 minute produces a uniform nanowire with an average diameter of approximately 15 nm, suggesting that metallization is initiated selectively from the MT inner core.

Decolorization and COD reduction of dyeing wastewater from a cotton textile mill using thermolysis and coagulation

The decolorization and reduction of COD of dyeing wastewater from a cotton textile mill was conducted using catalytic thermal treatment (thermolysis) accompanied with/without coagulation. Thermolysis in presence of a homogeneous copper sulphate catalyst was found to be the most effective in comparison to other catalysts (FeCl(3), FeSO(4), CuO, ZnO and PAC) used. A maximum reduction of chemical oxygen demand (COD) and color of dyeing wastewater of 66.85% and 71.4%, respectively, was observed with a catalyst concentration of 5 kg/m(3) at pH 8. Commercial alum was found most effective coagulant among various coagulants (aluminum potassium sulphate, PAC, FeCl(3) and FeSO(4)) tested during coagulation operations, resulting in 58.57% COD and 74% color reduction at pH 4 and coagulant dose of 5 kg/m(3). Coagulation of the clear fluid (supernatant) obtained after treatment by thermolysis at the conditions previously used resulted in an overall reduction of 89.91% COD and 94.4% color at pH 4 and a coagulant dose of 2 kg/m(3). The application of thermolysis followed by coagulation, thus, is the most effective treatment method in removing nearly 90% COD and 95% color at a lower dose of coagulant (2 kg/m(3)). The sludge thus produced would contain lower inorganic mass coagulant and, therefore, less amount of inorganic sludge.

Treatment of composite wastewater of a cotton textile mill by thermolysis and coagulation

Catalytic thermal treatment (thermolysis) accompanied with coagulation was used for the removal of COD and color of composite wastewater from a cotton textile mill. CuSO4, FeSO4, FeCl3, CuO, ZnO and PAC were used as catalytic agents during thermolysis. Homogeneous copper sulphate at a mass loading of 6 kg/m3 was found to be the most active. Similarly during coagulation aluminum potassium sulphate [KAl(SO4)(2).16H2O] at a coagulant concentration of 5 kg/m3 was found to be the best among the other coagulants tested, namely, commercial alum, FeSO4, FeCl3 and PAC. During thermolysis, a reduction in COD and color of composite wastewater of about 77.9 and 92.85%, respectively, was observed at pH 12. Coagulation of fresh composite waste using aluminum potassium sulphate resulted in 88.62% COD reduction and 95.4% color reduction at pH 8. Coagulation of the supernatant obtained after treatment by catalytic thermolysis resulted in overall reduction of 97.3% COD and close to 100% color reductions at pH 8 at a lesser coagulant concentration of 3 kg/m3. The results reveal that the application of coagulation after thermolysis is most effective in removing nearly 100% of COD and color at a lower dose of coagulant. The sludge thus produced would contain lower inorganic mass coagulant and can be used as a solid fuel with high calorific value of about 16 MJ/kg, close to that of Indian coal.

Electrochemical measurement of hydrogen peroxide in plasma: evaluation of freshwater prawn (Macrobrachium rosenbergii) and crucian carp (Cyprinus carpio) phagocytes under natural conditions

An electrochemical technique for the real-time detection of hydrogen peroxide (H2O2) was employed to describe respiratory burst activity (RBA) of phagocytes in plasma which can be used to evaluate the ability of immune system and disease resistance. The method is based upon the electric current changes, by redox reaction on platinum electrode of extracellular hydrogen peroxide (H2O2) released from phagocytes stimulated by the zymosan at 680 mV direct current (d.c.). Compared with the control, activation of respiratory burst by zymosan particles results in a high amperometric response, and a current peak was obtained during the whole monitoring process. The peak current was proved by addition of Cu2+ and other controls, to be the result of intense release of H2O2 from phagocytes. The peak area was calculated and used to evaluate the quantity of effective H2O2, which represents the quantity of H2O2 beyond the clearance of related enzymes in plasma. According to Faraday's law, the phagocytes' ability of prawns to generate effective H2O2 was evaluated from 1.253 x 10(-14) mol/cell to 6.146 x 10(-14) mol/cell, and carp from 1.689 x 10(-15) mol/cell to 7.873 x 10(-15) mol/cell. This method is an acute and quick detection of extracellular effective H2O2 in plasma and reflects the capacity of phagocytes under natural conditions, which could be applied for selecting species and parents with high immunity for breeding in aquaculture.

Catalytic thermal treatment of desizing wastewaters

In the present study, catalytic thermal treatment (thermolysis) was investigated for the reduction of COD and color of the desizing wastewater under moderate temperature and atmospheric pressure conditions using various catalysts. The experimental runs were performed in a glass reactor equipped with a vertical condenser. The homogeneous copper sulfate catalyst was found to be the most active in comparison to other catalysts under similar operating conditions. A removal of about 71.6% chemical oxygen demand (COD) and 87.2% color of desizing wastewater was obtained with a catalyst concentration of 4 kg/m(3) at pH 4. The initial pH value of the wastewater showed a pronounced effect on the precipitation process. During the thermolysis, copper gets leached to the aqueous phase, the residue obtained after the treatment is rich in copper and it can be blended with organic manure for use in agricultural fields. The thermogravimetric analysis showed that the thermal oxidation of the solid residue obtained after thermolysis gets oxidized at a higher temperature range than that of the residue obtained from the desizing wastewater. The results lead to the conclusion that thermochemical precipitation is a very fast (instantaneous) process and would need a very small reactor vessel in comparison to other processes.

Analysis of modified apolipoprotein B-100 structures formed in oxidized low-density lipoprotein using LC-MS/MS

Oxidatively modified low-density lipoprotein (oxLDL) is one of the major factors involved in the development of atherosclerosis. Because of the insolubility of apolipoprotein B-100 (apoB-100) and the heterogeneous nature of oxidative modification, modified structures of apoB-100 in oxLDL are poorly understood. We applied an on-Membrane sample preparation procedure for LC-MS/MS analysis of apoB-100 proteins in native and modified low-density lipoprotein (LDL) samples to eliminate lipid components in the LDLs followed by collection of tryptic digests of apoB-100. Compared with a commonly used in-gel digestion protocol, the sample preparation procedure using PVDF membrane greatly increased the recovery of tryptic peptides and resulted in improved sequence coverage in the final analysis, which lead to the identification of modified amino acid residues in copper-induced oxLDL. A histidine residue modified by 4-hydroxynonenal, a major lipid peroxidation product, as well as oxidized histidine and tryptophan residues were detected. LC-MS/MS in combination with the on-Membrane sample preparation procedure is a useful method to analyze highly hydrophobic proteins such as apoB-100.

New and clean strategy for the determination of Cu2+ in electroless copper plating baths

This article concerns a new and clean strategy for the determination of Cu(2+) in electroless copper plating baths with differential spectrophotometry. With this strategy, the problem of too high absorbance of Cu(2+) under plating conditions has been solved. We investigated the influence of copper sulfate, sodium hypophosphite, nickel sulfate, sodium citrate, polyglycol, temperature and pH on the absorption spectrum of Cu(2+) in electroless copper plating baths. Five grams per litre of CuSO(4).5H(2)O solution was selected as the reference solution. Experimental results prove that, this strategy has the merits of fast and high accuracy compared to the traditional techniques. Linearly dependent coefficient of the working curve is 0.9999 and the components in the formula have no obvious effect on the detection of Cu(2+) under experimental conditions. Therefore, we can directly move solutions from the EC plating baths for detection, after that the sample can still go back to the baths without any pollution from the plating process to the environment.

Thermodynamic and kinetic aspects of metal binding to the histidine-rich protein, Hpn

The histidine-rich protein, Hpn, binds to essential metals Ni2+, Cu2+, Zn2+ and a therapeutic metal Bi3+ with the in vitro affinities in the order of Cu2+ > Ni2+ > Bi3+ > Zn2+. In contrast, the in vivo (in E. coli) protection by the protein is in the order of Ni2+ > Bi3+ > Cu2+ approximately Zn2+. The release of Ni2+ from the protein follows a two-step process consisting of a rapidly established equilibrium and subsequently a rate-determining step (dissociation of Hpn-Ni...EDTA to Ni-EDTA). Our work suggests the nickel storage and homeostasis in H. pylori as the primary role of Hpn.

Planktonic microbial community responses to added copper

It is generally agreed that autotrophic organisms and especially phytoplanktonic species can be harmed by copper through its effect on photosystem. However, the impact of copper on other components of the pelagic food web, such as the microbial loop (autotrophic and heterotrophic picoplankton, pigmented and non-pigmented flagellates and ciliates) has received little attention. Indoor experiments were conducted to evaluate the direct and indirect effects of copper, supplied in the range of concentrations used to control cyanobacteria growth in ponds, on non-targeted organisms of natural microbial loop communities sampled in spring and summer. Two copper concentrations were tested (80microgL(-1) and 160microgL(-1) final concentrations), set, respectively, below and above the ligand binding capacity of the water samples. Both caused a significant decrease in the biomass and diversity of pigmented organisms (picophytoplankton and pigmented flagellates). Conversely, the heterotrophic bacterioplankton and the heterotrophic flagellates did not seem to be directly affected by either copper treatment in terms of biomass or diversity, according to the descriptor chosen. The ciliate biomass was significantly reduced with increasing copper concentrations, but differences in sensitivity appeared between spring and summer communities. Potential mixotrophic and nanoplanktorivorous ciliates appeared to be more sensitive to copper treatments than bacterivorous ciliates, suggesting a stronger direct and (or) indirect effect of copper on the former. Copper sulphate treatments had a significant restructuring effect on the microbial loop communities, resulting in a dominance of heterotrophic bacterioplankton among microbial microorganisms 27 days after the beginning of the treatment. The spring microbial communities exhibited a greater sensitivity than the summer communities with respect to their initial compositions.

Antioxidant activities of Toona Sinensis leaves extracts using different antioxidant models

The aim of the present study was to investigate the antioxidant activity of aqueous extracts of Toona sinensis (TS; 0-100 microg/mL) and gallic acid (0-50 microg/mL), with the purified natural phenolic components evaluated using different antioxidant models. It was found that the TS extracts and gallic acid possess effective antioxidant activity against various oxidative systems in vitro, including the scavenging of free and superoxide anion radicals, reducing power, and metal chelation. However, antioxidant activity in terms of metal chelation was not observed for the gallic acid. Moreover, TS extracts and gallic acid appear to possess powerful antioxidant properties with respect to oxidative modification of human LDL induced by CuSO4, AAPH or sodium nitroprusside, as assessed by the relative electrophoretic mobility, TBARS formation, and cholesterol degradation of oxidized LDL. Furthermore, AAPH-induced oxidative hemolysis, lipid peroxidation, and decline in superoxide dismutase (SOD) activity in human erythrocytes were prevented by both the TS extracts and the gallic acid. Our findings suggest that T. sinensis may act as a chemopreventative agent, providing antioxidant properties and offering effective protection from atherogenesis.

Common variants of apolipoprotein A-IV differ in their ability to inhibit low density lipoprotein oxidation

Apolipoprotein A-IV (apoA-IV) inhibits lipid peroxidation, thus demonstrating potential anti-atherogenic properties. The aim of this study was to investigate how the inhibition of low density lipoprotein (LDL) oxidation was influenced by common apoA-IV isoforms. Recombinant wild type apoA-IV (100 microg/ml) significantly inhibited the oxidation of LDL (50 microg protein/ml) by 5 microM CuSO(4) (P<0.005), but not by 100 microM CuSO(4), suggesting that it may act by binding copper ions. ApoA-IV also inhibited the oxidation of LDL by the water-soluble free-radical generator 2,2'-azobis(amidinopropane) dihydrochloride (AAPH; 1 mM), as shown by the two-fold increase in the time for half maximal conjugated diene formation (T(1/2); P<0.05) suggesting it can also scavenge free radicals in the aqueous phase. Compared to wild type apoA-IV, apoA-IV-S347 decreased T(1/2) by 15% (P=0.036) and apoA-IV-H360 increased T(1/2) by 18% (P=0.046). All apoA-IV isoforms increased the relative electrophoretic mobility of native LDL, suggesting apoA-IV can bind to LDL and acts as a site-specific antioxidant. The reduced inhibition of LDL oxidation by apoA-IV-S347 compared to wild type apoA-IV may account for the previous association of the APOA4 S347 variant with increased CHD risk and oxidative stress.

Debye temperature of metallic nanowires--an experimental determination from the resistance of metallic nanowires in the temperature range 4.2 K-300 K

We have studied the resistance of metallic nanowires (silver and copper) as a function of the wire diameter in the temperature range 4.2 K-300 K. The nanowires with an average diameter of 15 nm-200 nm and length 6 microm were electrochemically deposited using polycarbonate membranes as template from AgNO3 and CuSO4, respectively. The wires after growth were removed from the membranes by dissolving the polymer in dichloromethane and their crystalline nature confirmed by XRD and TEM studies. The TEM study establishes that the nanowires are single crystalline and can have twin in them. The resistivity data was fitted to Bloch-Gruneisen theorem with the values of Debye temperature and the electron-acoustic phonon coupling constant as the two fit variables. The value of the Debye temperature obtained for the Ag wires was seen to match well with that of the bulk while for Cu wires a significant reduction was observed. The observed increase in resistivity with a decrease in the wire diameter could be explained as due to diffuse surface scattering of the conduction electrons.

Optimization of MAGIC gel formulation for three-dimensional radiation therapy dosimetry

Polymer gel dosimetry aims to provide three-dimensional images of radiation therapy dose distributions in irradiated aqueous gels. The first gels required manufacture in an oxygen-free environment, but later the MAGIC formulation was introduced, which could be made in normal atmospheric conditions. Here we report our studies of the effects of variations in the composition of the MAGIC gel performed in order to optimize its performance over the useful dose range of 0 to 20 Gy. A new formulation (termed 'MAGIC-2') is comprised of 87% water, 4% methacrylic acid, 9% gelatin, 17.38 x 10(-6) M Cu(2+) and a molar ratio of ascorbic acid to [Cu(2+)] of 1000:1. MAGIC-2 has a dose-response slope-to-intercept ratio that is 78% greater than the original formulation and other more favorable properties.

Gamma Knife 3-D dose distribution near the area of tissue inhomogeneities by normoxic gel dosimetry

The accuracy of the Leksell GammaPlan, the dose planning system of the Gamma Knife Model-B, was evaluated near tissue inhomogeneities, using the gel dosimetry method. The lack of electronic equilibrium around the small-diameter gamma beams can cause dose calculation errors in the neighborhood of an air-tissue interface. An experiment was designed to investigate the effects of inhomogeneity near the paranosal sinuses cavities. The homogeneous phantom was a spherical glass balloon of 16 cm diameter, filled with MAGIC gel; i.e., the normoxic polymer gel. Two hollow PVC balls of 2 cm radius, filled with N2 gas, represented the air cavities inside the inhomogeneous phantom. For dose calibration purposes, 100 ml gel-containing vials were irradiated at predefined doses, and then scanned in a MR unit. Linearity was observed between the delivered dose and the reciprocal of the T2 relaxation time constant of the gel. Dose distributions are the results of a single shot of irradiation, obtained by collimating all 201 cobalt sources to a known target in the phantom. Both phantoms were irradiated at the same dose level at the same coordinates. Stereotactic frames and fiducial markers were attached to the phantoms prior to MR scanning. The dose distribution predicted by the Gamma Knife planning system was compared with that of the gel dosimetry. As expected, for the homogeneous phantom the isodose diameters measured by the gel dosimetry and the GammaPlan differed by 5% at most. However, with the inhomogeneous phantom, the dose maps in the axial, coronal and sagittal planes were spatially different. The diameters of the 50% isodose curves differed 43% in the X axis and 32% in the Y axis for the Z =90 mm axial plane; by 44% in the X axis and 24% in the Z axis for the Y=90 mm coronal plane; and by 32% in the Z axis and 42% in the Y axis for the X=92 mm sagittal plane. The lack of ability of the GammaPlan to predict the rapid dose fall off, due to the air cavities behind or near the lesion led to an overestimation of the dose that was actually delivered. Clinically, this can result in underdosing of lesions near tissue inhomogeneities in patients under treatment.

[Combined ecological effects of acetochlor and copper sulphate on microorganisms in phaeozem]

In order to explore the combined ecological effects of acetochlor and copper sulphate on soil microorganisms, the traditional toxicological methods and BIOLOG were employed. The results indicate that the combined application of acetochlor and copper sulphate has acute inhibitory effects on the amount of culture-dependent viable bacteria, actinomycetes and fungi as well as soil dehydrogenase activity. These effects are gradually weakened and even reverse with the increase of exposure time. The change of the substrate-induced respiration (SIR) is significantly increased under the combined stress. The data of BIOLOG are subjected to the principle component analysis (PCA) and three index models such as Shannon, Simpson and McIntosh indexes. The results also indicate that the combined application of acetochlor and copper sulphate can destroy the richness and evenness of microbial community diversity in phaeozem. The changes of carbon utilization diversity of phaeozem microbial community are also showed by the pattern of PCA.

Identification of tyrosinase inhibitors from Marrubium velutinum and Marrubium cylleneum

Tyrosinase is a key enzyme in the production of melanins in plants and animals. Forty-five secondary metabolites isolated from Marrubium velutinum and Marrubium cylleneum belonging to the classes of flavonoids, phenylethanoid glycosides, phenolic acids and lignan glycosides were screened for their inhibitory activity against mushroom tyrosinase. Flavonoids and phenylethanoid glycosides showed moderate inhibitory activity, while phenolic acids were less active than phenylethanoid glycosides, suggesting that both phenolic groups are important for the activity.

Preparation and use of 131I magic gel as a dosimeter for targeted radionuclide therapy

Clinical interest in targeted radiotherapy is increasing, but accurate dosimetry studies are difficult to achieve. The aim of this study was to investigate the preparation and use of a "normoxic" polymer gel (with a tissue-equivalent density), known as MAGIC gel, and magnetic resonance imaging (MRI) for nonsealed source dosimetry. MAGIC gel samples were mixed with deionized water (MAGIC95) or a solution of 131I (131I-MAGIC95). By measuring the radioinduced variations of R2 values (relaxivity) of irradiated gels, we analyzed the response of MAGIC95 and MAGIC samples to external photon beam or 131I irradiation (131I-MAGIC95). MRI showed that a homogeneous dose distribution from 131I can be achieved if the MAGIC gel, at a temperature of approximately 35 degrees C, is mixed in 131I solution and the resulting mixture shaken gently for 30 minutes. It is important that the vials are completely filled, as residual air reduces polymerization and causes spontaneous polymerization stripes. Responses of MAGIC95 or MAGIC gels to external photon beam irradiation are similar. The variations of R2 values for 131I-MAGIC95 gel depend on the absorbed dose and not on the duration of the irradiation being reproducible from one batch of gel to another. MAGIC gel responses to 131I or external beam irradiation (EBI) are different. Our preliminary results suggest that radiolabeled "normoxic" polymer can be easily and safely produced. Radiolabeled MAGIC gel may, therefore, be suitable for the creation of phantoms dedicated to nonsealed source dosimetry.

Open tubular CE forin vitro oxidation studies of human very-low-density lipoprotein particles

Human very-low-density lipoprotein (VLDL) particles were immobilised on the inner wall of electrochromatographic fused-silica capillaries, and the applicability of these capillary columns in oxidation studies was investigated. Capillaries coated with radiolabelled VLDL particles showed a coating efficiency of 97%, and allowed estimation of the amount of VLDL present in a capillary. Radioactivity measurements and atomic force microscopy with tapping mode confirmed the presence of VLDL particles as a monolayer. The pI determined for the VLDL was 4.7-4.8 varying with the human source. The effects of VLDL concentration, coating time and pH on the coating stability were clarified, and the stability was examined in terms of the repeatability of EOF and retention factors of selected steroids. The repeatability of run-to-run and the coating-to-coating reproducibility ranged from 2.6 to 4.9% and 3.2 to 6.6%, respectively. The lifetime of a coating was at least 7 days or 84 consecutive runs. The in situ copper-mediated VLDL oxidation carried out in the capillary with optimised VLDL coating showed that, during the oxidation of VLDL particles, the negative charges of the particles are increased, leading to enhanced EOF mobilities. Several oxidation parameters, including copper sulfate concentration, amount of EDTA needed to stop the reaction, pH and the oxidation procedure, were examined. Effect of the oxidation process on the stability of the coating in one capillary, and in five different capillaries ranged between 0.4-4.1% and 0.8-6.6%, respectively. The in situ oxidation of VLDL particles was compared with that of low-density lipoproteins.

Protective effects of magnolol against oxidized LDL-induced apoptosis in endothelial cells

Magnolol, a compound extracted from the Chinese medicinal herb Magnolia officinalis, has several biological effects. However, its protective effects against endothelial injury remain unclear. In this study, we examined whether magnolol prevents oxidized low density lipoprotein (oxLDL)-induced vascular endothelial apoptosis. Incubation of oxLDL with magnolol (2.5-20 microM) inhibited copper-induced oxidative modification via diene formation, thiobarbituric acid reactive substances (TBARS) assay and electrophoretic mobility assay. Apoptotic cell death as characterized by terminal deoxynucleotidyl transferase-mediated dUTP nick end-labeling (TUNEL) stain. We measured the production of reactive oxygen species (ROS) by using the fluorescent probe 2',7'-dichlorofluorescein acetoxymethyl ester (DCF-AM), and observed the activity of antioxidant enzymes. Furthermore, several apoptotic signaling pathways which showed NF-kappaB activation, increased cytosolic calcium, alteration of mitochondrial membrane potential, cytochrome c release and activation of caspase 3 were also investigated. We demonstrated that magnolol prevented the copper-induced oxidative modification of LDL. Magnolol attenuated the oxLDL-induced ROS generation and subsequent NF-kappaB activation. Furthermore, intracellular calcium accumulation and subsequent mitochondrial membrane potential collapse, cytochome c release and activation of caspase 3 caused by oxLDL were also inhibited by magnolol. Our results suggest that magnolol may have clinical implications in the prevention of atherosclerotic vascular disease through decreasing the oxLDL-induced ROS production.

Vibrational spectra of the Cu(II) complexes of L-asparagine and L-glutamine

The infrared and Raman spectra of the copper(II) complexes [Cu(L-asn)2] and [Cu(L-gln)2] (L-asn=L-asparagine; L-gln=L-glutamine), were recorded and analyzed in relation to its structural peculiarities. Some comparisons between the spectra of these complexes and with those of related systems are made. The characteristics of the carboxylate and amide groups of the bonded ligands are discussed in detail.