Advances in chemical removal and degradation technologies for microplastics in the aquatic environment: A review

In recent years, global attention has been extensively focused on the water pollution and health risks caused by microplastics(MPs), thereby making the treatment of microplastics a key area of research. Chemical removal and degradation present effective approaches to addressing this issue. Consequently, this review summarizes the latest research advancements in the chemical removal and degradation of microplastics in water, comparing the treatment efficacy and advantages and disadvantages of various removal/degradation techniques. It elucidates the chemical mechanisms underlying the removal/degradation of microplastics and identifies the primary influencing factors during the treatment process. A systematic analysis of the performance of microplastic treatment technologies is conducted, examining the impact of microplastic characteristics, operational conditions, and other parameters on the effectiveness of microplastic treatment.

Exploring the potential and challenges of developing physiologically-based toxicokinetic models to support human health risk assessment of microplastic and nanoplastic particles

Microplastics (MPs) and nanoplastics (NPs) pollution has emerged as a significant and widespread environmental issue. Humans are inevitably exposed to MPs and NPs via ingestion, inhalation, and dermal contacts from various sources. However, mechanistic knowledge of their distribution, interaction, and potency in the body is still lacking. To address this knowledge gap, we have undertaken the task of elucidating the toxicokinetic (TK) behaviors of MPs and NPs, aiming to provide mechanistic information for constructing a conceptual physiologically based toxicokinetic (PBTK) model to support in silico modeling approaches. Our effort involved a thorough examination of the existing literature and data collation on the presence of MPs in the human body and in vitro/ex vivo/in vivo biodistribution across various cells and tissues. By comprehending the absorption, distribution, metabolism, and excretion mechanisms of MPs and NPs in relation to their physicochemical attributes, we established a foundational understanding of the link between external exposure and internal tissue dosimetry. We observed that particle size and surface chemistry have been thoroughly explored in previous experimental studies. However, certain attributes, such as polymer type, shape, and biofilm/biocorona, warrant attention and further examination. We discussed the fundamental disparities in TK properties of MPs/NPs from those of engineered nanoparticles. We proposed a preliminary PBTK framework with several possible modeling approaches and discussed existing challenges for further investigation. Overall, this article provides a comprehensive compilation of existing TK data of MPs/NPs, a critical overview of TK processes and mechanisms, and proposes potential PBTK modeling approaches, particularly regarding their applicability to the human system, and outlines future perspectives for developing PBTK models and their integration into human health risk assessment of MPs and NPs.

Ingestion and depuration of polyester microfibers by Crassostrea gasar (Adanson, 1757)

The study aimed to obtain environmentally relevant microfibers (MFs) from polyester fabric and assess their impact on the oyster Crassostrea gasar. MFs were obtained by grinding the fabric, and their accumulation in oysters gills and digestive glands was analyzed after exposure to 0.5 mg/L for 2 and 24 h. Additionally, a 48 h depuration was conducted on the oysters exposed for 24 h. Sublethal effects were assessed in oysters exposed for 24 h and depurated for 48 h, using biomarkers like Catalase (CAT), Glutathione S-transferase (GST), and Glutathione Peroxidase (GPx), along with histological analyses. Polyester fabric grinding produced significant MFs (average length: 570 μm) with degraded surface and increased malleability. Oysters showed increased MF accumulation in digestive glands post-exposure, with no impact on antioxidant enzymes. Depuration decreased MFs accumulation. Histological analysis revealed accumulation in the stomach and brown cells, possibly indicating inflammation. This raises concerns about MFs bioaccumulation in marine organisms, impacting the food chain and safety.

Paving the way for new and challenging matrix reference materials-particle suspensions at the core of material processing providing RMs for method development and method validation

Sufficient homogeneity of the certified parameter(s) over the whole fill series of a matrix reference material (RM) is a fundamental quality criterion. In practice, the heterogeneity of the target parameter is evaluated, whereby a relative value can be calculated of how much the target parameter is varying over the RM-batch. A high degree of homogeneity (low heterogeneity) is an inherent quality mark of a good RM. Here, we report how challenging matrix RMs were produced by using particle suspensions at the core of the material processing step. The examples of matrix RMs produced span from whole water reference materials for persistent organic pollutants, PM2.5-like atmospheric dust certified for specific ions to microplastic RMs. Most of these RMs were subsequently used in different phases of analytical method development or for method validation. Common to all these matrices is that they cannot be easily mixed, handled, or dosed to prepare larger sample batches. In all cases, a continuously stirred suspension of particles was used during material processing. In general, relative between-bottle heterogeneities from 1.6 to 6% were achieved for the target parameters in these matrix presentations. Concerning developments of new CRMs in emerging fields, the co-dependence between the availability of validated analytical methods with good repeatability and testing materials with a known and high homogeneity of the target parameter(s) becomes particularly challenging. This situation is an RM/Method causality dilemma. To overcome that hurdle, strategies are proposed for stepwise processes where RM producers and a network of analytical method developers could work hand in hand. In addition, development of a portfolio of inexpensive and well-homogenised common samples coupled with a reporting interface is suggested. This would benefit method developers and RM producers alike. As more and more data is compiled for a specific matrix, it paves the way for new and challenging RMs that can later be used by a wider community.

Toxicological assessment of dietary exposure of polyethylene microplastics on growth, nutrient digestibility, carcass and gut histology of Nile Tilapia (Oreochromis niloticus) fingerlings

This study was conducted to ascertain the negative effects of dietary low-density polyethylene microplastics (LDPE-MPs) exposure on growth, nutrient digestibility, body composition and gut histology of Nile tilapia (Oreochromis niloticus). Six sunflower meal-based diets (protein 30.95%; fat 8.04%) were prepared; one was the control (0%) and five were incorporated with LDPE-MPs at levels of 2, 4, 6, 8 and 10% in sunflower meal-based diets. A total of eighteen experimental tanks, each with 15 fingerlings, were used in triplicates. Fish were fed at the rate of 5% biomass twice a day for 60 days. Results revealed that best values of growth, nutrient digestibility, body composition and gut histology were observed by control diet, while 10% exposure to LDPE-MPs significantly (P < 0.05) reduced weight gain (WG%, 85.04%), specific growth rate (SGR%, 0.68%), and increased FCR (3.92%). The findings showed that higher level of LDPE-MPs (10%) exposure in the diet of O. niloticus negatively affects nutrient digestibility. Furthermore, the results revealed that the higher concentration of LDPE-MPs (10%) had a detrimental impact on crude protein (11.92%) and crude fat (8.04%). A high number of histological lesions were seen in gut of fingerlings exposed to LDPE-MPs. Hence, LDPE-MPs potentially harm the aquatic health.

Microplastic infiltration into mobile sediments

This study investigates the dynamics of microplastic infiltration into non-stationary sandy sediments, a pressing environmental concern due to the rising prevalence of microplastics in aquatic ecosystems. An annular flume was used to simulate riverine bedform motion, examining the suspension and infiltration of denser-than-water microplastic particles, including polyvinyl chloride (PVC), polyamide (PA), and polylactide (PLA). The experiments focused on various particle sizes (ranging from 0.2 to 5 mm in diameter) and bedform migration speeds, known as celerities. The findings indicate that particle size is a significant factor influencing the depth of infiltration and distribution within sediment layers, whereas the impact of bedform celerities and particle densities appears less significant. This research provides novel insights into the behavior of microplastics in dynamic sedimentary environments, highlighting the intricate interaction between microplastic characteristics and sedimentary processes. The results contribute to an enhanced understanding of microplastic distribution and accumulation in riverine systems, offering crucial data for developing predictive models and formulating potential remediation strategies for microplastic pollution.

From organic fertilizer to the soils: What happens to the microplastics? A critical review

In recent, soil microplastic pollution arising from organic fertilizers has been of a great increasing concern. In response to this concern, this review presents a comprehensive analysis of the occurrence and evolution of microplastics in organic fertilizers, their ingress into the soil, and the subsequent impacts. Organic fertilizers are primarily derived from solid organic waste generated by anthropocentric activities including urban (daily-life, municipal wastes and sludge), agricultural (manure, straw), and industrial (like food industrial waste etc.) processes. In order to produce organic fertilizer, the organic solid wastes are generally treated by aerobic composting or anaerobic digestion. Currently, microplastics have been widely detected in the raw materials and products of organic fertilizer. During the process of converting organic solid waste materials into fertilizer, intense oxidation, hydrolysis, and microbial actions significantly alter the physical, chemical, and surface biofilm properties of the plastics. After the organic fertilizer application, the abundances of microplastics significantly increased in the soil. Additionally, the degradation of these microplastics often promotes the adsorption of organic pollutants and affects their retention time in the soil. These microplastics, covered by biofilms, also significantly alter soil ecology due to the unique properties of the biofilm. Furthermore, the biofilms also play a role in the degradation of microplastics in the soil environment. This review offers a new perspective on the soil environmental processes involving microplastics from organic fertilizer sources and highlights the challenges associated with further research on organic fertilizers and microplastics.

Nano-scale and micron-scale plastics amplify the bioaccumulation of benzophenone-3 and ciprofloxacin, as well as their co-exposure effect on disturbing the antioxidant defense system in mussels, Perna viridis

Plastics ranging from nano-scale to micron-scale are frequently ingested by many marine animals. These particles exhibit biotoxicity and additionally perform as vectors that convey and amass adsorbed chemicals within organisms. Meanwhile, the frequency of detection of the benzophenone-3 and ciprofloxacin can be adsorbed on plastic particles, then accumulated in bivalves, causing biotoxicity. To understand their unknown accumulative kinetics in vivo affected by different plastic sizes and toxic effect from co-exposure, several scenarios were set up in which the mode organism were exposed to 0.6 mg/L of polystyrene carrying benzophenone-3 and ciprofloxacin in three sizes (300 nm, 38 μm, and 0.6 mm). The live Asian green mussels were chosen as mode organism for exposure experiments, in which they were exposed to environments with plastics of different sizes laden with benzophenone-3 and ciprofloxacin, then depurated for 7 days. The bioaccumulation and depuration kinetics of benzophenone-3 and ciprofloxacin were measured using HPLC-MS/MS after one week of exposure and depuration. Meanwhile, their toxic effect were investigated by measuring the changes in six biomarkers (condition index, reactive oxygen species, catalase, glutathione, lipid peroxidation, cytochrome P450 and DNA damage). The bioconcentration factors in mussels under different exposure conditions were 41.48-111.75 for benzophenone-3 and 6.45 to 12.35 for ciprofloxacin. The results suggested that microplastics and nanoplastics can act as carriers to increase bioaccumulation and toxicity of adsorbates in mussels in a size-dependent manner. Overproduction of reactive oxygen species caused by microplastics and nanoplastics led to increased DNA damage, lipid peroxidation, and changes in antioxidant enzymes and non-enzymatic antioxidants during exposure. Marked disruption of antioxidant defenses and genotoxic effects in mussels during depuration indicated impaired recovery. Compared to micron-scale plastic with sizes over a hundred micrometers that had little effect on bivalve bioaccumulation and toxicity, nano-scale plastic greatly enhanced the biotoxicity effect.

Microplastic pollution in high-altitude Nainital lake, Uttarakhand, India

Microplastics (MPs) contamination has been reported in all environmental compartments, but very limited information is available at higher-altitude lakes. Nainital Lake, located at a high altitude in the Indian Himalayas, has various ecosystem services and is the major source of water for Nainital town, but the MP abundance is still unknown. This study presents the first evidence of the abundance and distribution of MP in Nainital Lake. Surface water and sediment samples were analysed from 16 different sites in and around the catchment area of Nainital Lake. The MP were observed in all the samples, and their abundance in surface water was 8.6-56.0 particles L-1 in the lake and 2.4-88.0 particles L-1 in hotspot sites. In the surface sediment, MP abundance ranged from 0.4-10.6 particles g-1, while in the hotspot sediment, the mean abundance was 0.6 ± 0.5 particles g-1. Fibers were the dominant MP, while 0.02-1 mm were the predominant size of MP particles. The results of chemical characterization showed the presence of six polymers, among which high-density polyethylene was the most abundant. The Polymer Hazard Index assessment classified the identified polymers as low-to high-risk categories, with a higher abundance of low- (polypropylene) and medium- (polyethylene)-risk polymers. Tourist activities and run-off catchments can be considered the major sources of MP, which can affect the ecosystem. Minimal concentrations of MP were observed in the tube well and drinking water, which depicts the direct risks to humans and, thus, the need for remedial measures to prevent MP contamination in drinking water. This study improves the knowledge of MP contamination in the higher-altitude freshwater lake, which can be the major pathway for the transport of MP to the rivers, and also emphasizes the need for waste management in Nainital town.

Detection of plastic, cellulosic micro-fragments and microfibers in Laternula elliptica from King George Island (Maritime Antarctica)

It is generally acknowledged that microplastic pollutants are prevalent in ocean waters and sediments across a range of tropical, temperate, subpolar, and polar regions. The waters surrounding King George Island are significantly impacted by human activities, particularly those related to scientific stations, fishing, and tourism. Organisms, such as Laternula elliptica, can be used as environmental monitors due to the likelihood that they will bioaccumulate pollutants. The goal of this study was to quantify and identify plastic and cellulosic micro-fragments and microfibers present in the soft body of clams (n = 21), collected from Fildes Bay near sewage and wastewater discharges. Plastic and cellulose microfragments and microfibers were counted, and their compositions were determined using FT-IR. All 21 individuals sampled contained fragments and fibers, with a total of 900 items detected (42.86 ± 25.36 mean ± SD items per individual), or 1.82 items g.wet mass-1. 58 % of items were cellulose and 22 % plastic. Considering the plastic polymer compositions, 28.57 % were polyethylene terephthalate (PET), 21.43 % acrylic, 14.29 % high-density polyethylene (HDPE), 14.29 % Polypropylene (PP), 7.14 % ultra-high drawn polyethylene filament (UHMWPE), 7.14 % polyester and 7.14 % Polyethylene. The quantities and prevalence of MP in L. elliptica were higher than those found in other Antarctic marine species, and even in bivalves from populated regions of the world. Our work assessed the pollution status of L. elliptica near an effluent of wastewater plants and found that 95 % of individuals displayed MP and 100 % microfibers that could impact their population.

Innovative overview of the occurrence, aging characteristics, and ecological toxicity of microplastics in environmental media

Microplastics (MPs), pollutants detected at high frequency in the environment, can be served as carriers of many kinds of pollutants and have typical characteristics of environmental persistence and bioaccumulation. The potential risks of MPs ecological environment and health have been widely concerned by scholars and engineering practitioners. Previous reviews mostly focused on the pollution characteristics and ecological toxicity of MPs, but there were few reviews on MPs analysis methods, aging mechanisms and removal strategies. To address this issue, this review first summarizes the contamination characteristics of MPs in different environmental media, and then focuses on analyzing the detection methods and analyzing the aging mechanisms of MPs, which include physical aging and chemical aging. Further, the ecotoxicity of MPs to different organisms and the associated enhanced removal strategies are outlined. Finally, some unresolved research questions related to MPs are prospected. This review focuses on the ageing and ecotoxic behaviour of MPs and provides some theoretical references for the potential environmental risks of MPs and their deep control.

Low-dose polystyrene microplastics exposure impairs fertility in male mice with high-fat diet-induced obesity by affecting prostate function

The harmful effects of microplastics (MPs) on male fertility are receiving more and more attention. However, the impact of low-dose MPs exposure on the reproductive function of male mice is still unclear. In this study, we exposed male mice to low-dose MPs (25-30 μg/kg body weight/day) or low-dose MPs combined with high-fat diet (HFD) feeding. Our results showed that low-dose MPs exposure or HFD feeding significantly reduced sperm quality and the number of offspring born, while low-dose MPs exposure combined with HFD feeding further enhanced the above effects. The combination of low-dose MPs exposure and HFD feeding resulted in a notable elevation of inflammatory level within the prostate of mice and induced apoptosis of prostate epithelium and a decrease in nutrients (zinc, citrate) in seminal plasma fluid. Our findings in this study could provide valuable clues for better understanding the influence of low-dose MPs exposure on the reproductive system under metabolic disorders and facilitate the development of the prevention of reproductive toxicity caused by MPs exposure.

Microplastics inhibit the growth of endosymbiotic Symbiodinium tridacnidorum by altering photosynthesis and bacterial community

Microplastics, ubiquitous anthropogenic marine pollutants, represent potential threats to coral-Symbiodiniaceae relationships in global reef ecosystems. However, the mechanism underlying the impacts of polystyrene microplastics (PS-MPs) on Symbiodiniaceae remains poorly understood. In this study, the cytological, physiological, and microbial responses of Symbiodinium tridacnidorum, a representative Symbiodiniaceae species, to varying concentrations of PS-MPs (0, 5, 50, 100, and 200 mg L-1) were investigated. The results revealed that microplastic exposure inhibited cell division, resulting in reduced cell density compared to control group. Furthermore, algal photosynthetic activity, as indicated by chlorophyll content, Fv/Fm, and net photosynthetic rate, declined with increasing microplastic concentration up to 50 mg L-1. Notably, elevated levels of microplastics (100 and 200 mg L-1) prompted a significant increase in cell size in S. tridacnidorum. Transmission electron microscopy and fluorescence microscopy indicated that hetero-aggregation was formed between high levels of PS-MPs and algal cells, ultimately causing damage to S. tridacnidorum. Moreover, the impact of PS-MPs exposure on the bacterial community associated with S. tridacnidorum was investigated. The results showed a reduction in alpha diversity of the bacterial community in groups exposed to 50, 100, and 200 mg L-1 of microplastics compared to those treated with 0 and 5 mg L-1. Additionally, the relative abundance of Marinobacter, Marivita, and Filomicrobium significantly increased, while Algiphilus and norank Nannocystaceae declined after microplastic exposure. These findings suggest that MPs can inhibit the growth of S. tridacnidorum and alter the associated bacterial community, posing a potential serious threat to coral symbiosis involving S. tridacnidorum.

Microplastics in beach sediments of the Azores archipelago, NE Atlantic

Oceanic islands are exposed to plastic debris that has accumulated in the open ocean, particularly in the subtropical gyres. This study investigates the abundance and typology of microplastics (from 0.1 to 5 mm) on 19 sandy beaches spread across 8 oceanic islands of the Azores archipelago. Between January and April 2016, a total of 341 particles retrieved from all beaches, were identified as microplastics. The highest concentration (50.19 ± 21.93 particles kg-1 dw) was found in Terceira Island. Beach morphology and grain size were important factors explaining microplastic concentration. Fibres were the most dominant morphology recovered (80.9 %), followed by fragments (12.3 %). Fourier transform infrared spectroscopy (FTIR) revealed that 41 % of the fibres consisted of polyester and 60 % of the fragments were polyethylene. This research underlines the widespread contamination of microplastics in oceanic islands of the Atlantic Ocean.

Polystyrene microplastics mitigate lead-induced neurotoxicity by reducing heavy metal uptake in zebrafish larvae

The combined pollution of lead (Pb) and polystyrene microplastics (PS-MPs) is common in aquatic environments. However, the combined neurotoxicity of these two pollutants is still poorly understood. In this study, zebrafish (Danio rerio) larvae were used to assess the combined neurotoxicity and mechanism of Pb and PS-MPs at environmentally relevant concentrations. The results showed that Pb (10 μg/L) induced abnormal behavior including significantly reduced movement distance, maximum acceleration, and average velocity (P < 0.05) along with altered expression of neurodevelopment-related genes (gap43 and α1-tubulin) (P < 0.05). PS-MPs (25 μg/L, 250 μg/L; diameter at 25 μm) co-exposure not only significantly reduced the concentration of Pb in the exposed solution (P < 0.01), but also decreased the uptake of Pb by downregulating the divalent metal transporter 1 gene (dmt1) (P < 0.01), thereby alleviating Pb-induced neurotoxicity. However, to demonstrate that PS-MPs alleviate the neurotoxicity of Pb by reducing Pb uptake, upregulation of dmt1 by addition of deferoxamine (DFO, an efficient iron chelator, 100 μM) significantly increased the Pb uptake and exacerbated neurotoxicity in zebrafish. In summary, our results demonstrated that PS-MPs alleviate Pb neurotoxicity by downregulating the mRNA level of dmt1 and decreasing the Pb uptake. This study provides a new insight into the combined neurotoxicity and underlying mechanisms of PS-MPs and Pb on zebrafish.

A review of microplastic transport in coastal zones

Transport of microplastics (MPs) in coastal zones is influenced not only by their own characteristics, but also by the hydrodynamic conditions and coastal environment. In this article, we first summarized the source, distribution and abundance of MPs in coastal zones around the world through the induction of in-situ observation literature, and then comprehensively reviewed the different transports of MPs in coastal zones, including sedimentation, vertical mixing, resuspension, drift and biofouling. Afterwards, we conducted a comparative analysis of relevant experimental literature, and found that the current experimental research on microplastic transport mainly focused on the settling velocity under static water and the transport distribution under dynamic water. Based on the relevant literature on numerical simulation of microplastic transport in coastal zones, it was also found that the Euler-Lagrange method is the most widely used. The main influencing factor in the Euler method is hydrodynamic, while the Lagrange method and Euler-Lagrange method is hydrodynamic and microplastic particle characteristics. Tides in hydrodynamics are mentioned the most frequently, and the role of turbulence in almost all the literature. The density of MPs is the most influencing factor on transport results, followed by size, while shape is only studied in small-scale models. Some literature has also found that the influence of biofilms is mainly reflected in the changes in the density and size of MPs.

Hazards of microplastics exposure to liver function in fishes: A systematic review and meta-analysis

Microplastics (5 mm - 1 μm) have become one of the major pollutants in the environment. Numerous studies have shown that microplastics can have negative impacts on aquatic organisms, affecting their liver function levels. However, the extent of these effects and their potential toxicological mechanisms are largely unknown. In this study, a meta-analysis and systematic review were conducted to assess the effects of microplastics on fish liver function and summarize the potential toxicological mechanisms of microplastic-induced liver toxicity. The meta-analysis results indicate that compared to the control group, exposure to microplastics significantly affects fish liver indicators: aspartate aminotransferase (AST) (p < 0.001), alanine aminotransferase (ALT) (p < 0.001), alkaline phosphatase (ALP) (p < 0.001), total protein (TP) (p < 0.001), and lactate dehydrogenase (LDH) (p < 0.001), including oxidative stress indicators: superoxide dismutase (SOD) (p < 0.001), glutathione S-transferase (GST) (p < 0.001), glutathione (GSH) (p < 0.001), and malondialdehyde (MDA) (p < 0.001) in fish liver. For fish living in different environments, the potential toxicological mechanisms of microplastics exposure on fish liver may exhibit some differences. For freshwater fish, the mechanism may be that microplastics exposure causes overproduction of reactive oxygen species (ROS) in fish hepatocyte mitochondria. ROS promotes the expression of toll-like receptor 2 (TLR2) and activates downstream molecules myeloid differentiation factor 88 (MyD88) and tumor necrosis factor receptor-associated factor 6 (TRAF6) of the TLR2 signaling pathway, leading to phosphorylation of NF-κB p65. This leads to the release of inflammatory factors and oxidative stress and inflammation in fish liver. In addition, for seawater fish, the mechanism may be that microplastics exposure can cause damage or death of fish hepatocytes, leading to continuous pathological changes, inflammation, lipid and energy metabolism disorders, thereby causing significant changes in liver function indexes.

The toxicity of polystyrene micro- and nano-plastics on rare minnow (Gobiocypris rarus) varies with the particle size and concentration

How the particle size and concentration of microplastics impact their toxicity is largely unknown. Herein, the effects of polystyrene microplastics (1 μm, MPs) and nanoplastics (100 nm, NPs) exposed at 1 mg/L (L) and 10 mg/L (H), respectively, on the growth, histopathology, oxidative stress, gut microbiome, and metabolism of rare minnow (Gobiocypris rarus) were investigated by chemical analysis and multi-omics. MPs and NPs inhibited the growth, induced histopathological injury and aggravated oxidative stress markedly with contrasting significance of particle size and concentration. The composition of core gut microbiota changed dramatically especially for the MPs-H. Similarly, gut bacterial communities were reshaped by the MPs and NPs but only NPs-H decreased both richness and Shannon indexes significantly. Co-occurrence network analysis revealed that the potential keystone genera underwent great changes in exposed groups compared to the control. MPs-H increased the network complexity and the frequency of positive interactions which was opposite to other exposed groups. Moreover, the metabolomic profiles associated with amino acid, lipid, unsaturated fatty acid and hormone metabolism were disturbed significantly especially for MPs-H and NPs-H. In conclusion, the toxicity of MPs depends on both the particle size and concentration, and varies with the specific indicators as well.

Development of a polystyrene-based microplastic model for bioaccumulation and biodistribution study using radiotracing and nuclear analysis method

The investigation of micro or nano plastics behavior in the environment is essential to minimize the hazards of such pollutants on humans. While the conventional method requires sophisticated procedures and a lot of animal subjects, the nuclear technique confers a sensitive, accurate, and real-time method using radiolabeled micro or nano plastics as a tracer. In this study, polystyrene sulfonate-based microplastic (PSM) was developed with a size of around 3.6 μm, followed by radiolabeling with iodine-131 (131I) or zinc-65 (65Zn) for microplastic radiotracer model. After a stability study in seawater, phosphate buffer saline (PBS), and human serum albumin (HSA) for fifteen days, PSM-131I remained stable (>90 %), except in HSA (50-60 % after day-9), while PSM-65Zn was unstable (<50 %).

Isolation, characteristics, and poly(butylene adipate-co-terephthalate) (PBAT) degradation mechanism of a marine bacteria Roseibium aggregatum ZY-1

Marine microorganisms have been reported to degrade microplastics. However, the degradation mechanisms are still poorly understood. In this study, a bacterium Roseibium aggregatum ZY-1 was isolated from seawater, which can degrade poly(butylene adipate-co-terephthalate) (PBAT). The PBAT-PLA(polylactic acid, PLA) films, before and after degradation, were characterized by scanning electron microscope (SEM) and Fourier transform infrared spectrometer (FTIR), the weight loss rate and water contact angle were measured. The results indicate that ZY-1 colonized on PBAT-PLA film, changed the functional groups and decreased water contact angle of PBAT-PLA film. Moreover, liquid chromatography mass spectrometry (LC-MS) analysis reveales that PBAT was degraded into its oligomers (TB, BTB) and monomers (T, A) during 10 days, and adipic acid (A) could be used as a sole carbon source. The whole genome sequencing analyses illustrate the mechanisms and enzymes such as PETase, carboxylesterases, arylesterase (PpEst) and genes like pobA, pcaBCDFGHIJKT, dcaAEIJK, paaGHJ involved in PBAT degradation. Therefore, the R. aggregatum ZY-1 will be a promising candidate of PBAT degradation.

Mussels (Mytilus spp.) in Svalbard contain microplastic particles in tissues: Implications for monitoring

We examined the presence of microplastics in blue mussels Mytilus spp. from the intertidal zone of western Spitsbergen in Arctic Svalbard. The optical microscopy technique detected a total of 148 microplastics, with the highest concentration per mussel being 24 particles. Microplastics were found in 84% of the examined mussels. The microplastics ranged in size from <0.5 mm to 5 mm and consisted of fibers (83%), fragments (13%), plates (3%), and spherules (1%). The micro-Raman spectroscopy technique revealed four different types of polymers: polyethylene (67%), nylon-12 (17%), low-density polyethylene (11%), and polypropylene (5%). Our research shows that Arctic coastal waters are polluted with microplastics notwithstanding their remoteness. These findings suggest that microplastic contamination may harm marine life and coastal ecosystems and require further research into long-term environmental effects. We also indicate that intertidal mussels may be beneficial for monitoring microplastics because they can be collected without involving diving.

Effects of microplastics on the structure and function of bacterial communities in sediments of a freshwater lake

As an emerging pollutant, microplastics (MPs) cause widespread concern around the world owing to the serious threat they pose to ecosystems. In particular, sediments are thought to be the long-term sink for the continual accumulation of MPs in freshwater ecosystems. Polyethylene (PE) and polyethylene terephthalate (PET) have been frequently detected with large concentration variations in freshwater sediments from the lower reaches of the Yangtze River, one of the most economically developed regions in China, characterized by accelerated urbanization and industrialization, high population density and high plastics consumption. However, the impact of PE and PET on the sedimental bacterial community composition and its function has not been well reported for this specific region. Herein, PE and PET particles were added to freshwater sediments to assess the effects of different MP types on the bacterial community and its function, using three concentrations (500, 1500 and 2500 items/kg) per MP and incubations of 35, 105 and 175 days, respectively. This study identified a total of 68 phyla, 211 classes, 518 orders, 853 families and 1745 genera. Specifically, Proteobacteria, Chloroflexi, Acidobacteriota, Actinobacteriota and Firmicutes were the top five phyla. A higher bacterial diversity was obtained in control sediments than in the MP-treated sediments. The presence of MPs, whether PET or PE, had significant impact on the bacterial diversity, community structure and community composition. PICRUSt2 and FAPOTAX predictions demonstrated that MPs could potentially affect the metabolic pathways and ecologically functional groups of bacteria in the sediment. Besides the MP-related factors, such as the type, concentration and incubation time, the physicochemical parameters had an effect on the structure and function of the bacterial community in the freshwater sediment. Taken together, this study provides useful information for further understanding how MPs affect bacterial communities in the freshwater sediment of the lower reaches of the Yangtze River, China.

Microplastic and mesoplastic pollution in surface waters and beaches of the Canary Islands: A review

The Canary Archipelago is a group of volcanic islands located in the North Atlantic Ocean with high marine biodiversity. This archipelago intercepts the Canary Current, the easternmost branch of the Azores Current in the North Atlantic Subtropical Gyre, which brings large amounts of litter from remote sources via oceanic transportation. It is, therefore, particularly vulnerable to marine plastic pollution. Here, we present a review of the available studies on mesoplastics and microplastics in the Canary Islands over the last decade to evaluate the level and distribution of plastic pollution in this archipelago. Specifically, we focused on data from beaches and surface waters to assess the pollution level among the different islands as well as between windward and leeward zones, and the main characteristics (size, type, colour, and polymer) of the plastics found in the Canary Islands. The concentrations of meso- and MPs on beaches ranged from 1.5 to 2972 items/m2 with a mean of 381 ± 721 items/m2. The concentration of MPs (>200 μm) in surface waters was highly variable with mean values of 998 × 103 ± 3364 × 103 items/km2 and 10 ± 31 items/m3. Plastic pollution in windward beaches was one order of magnitude significantly higher than in leeward beaches. The accumulation of MPs in surface waters was higher in the leeward zones of the high-elevation islands, corresponding to the Special Areas of Conservation (ZECs) and where the presence of marine litter windrows (MLW) has been reported. Microplastic fragments of polyethylene of the colour category "white/clear/uncoloured" were the most common type of plastic reported in both beaches and surface waters. More studies on the occurrence of MLW in ZECS and plastic pollution in the water column and sediments, including small-size fractions (<200 μm), are needed to better assess the level of plastic pollution and its fate in the Canary Islands. Overall, this review confirms that the Canary Archipelago is a hotspot of oceanic plastic pollution, with concentrations of MPs in surface waters in the highest range reported for oceanic islands and one of the highest recorded mean concentrations of beached meso- and microplastics in the world.

Entanglement and ingestion of microfibers by the oyster pea crab Zaops ostreum, an endosymbiont of the eastern oyster Crassostrea virginica

The kleptoparasitic pea crab Zaops ostreum lives within the gills of bivalves, including the economically important eastern oyster Crassostrea virginica. Previous research along the east coast of central Florida has found an average of 2.3 pieces of plastic per oyster. The goals of our research were to determine if filter-feeding oysters transfer microfibers to Z. ostreum via the crab: 1) actively consuming plastic particles, or 2) passively becoming entangled in microfibers. Our results show that both occur. While only 11.6 % of Z. ostreum (total n = 122) consumed microfibers, those that did had up to 14 pieces in their soft tissues. Similarly, only 7.4 % of Z. ostreum had microfibers entangled around their appendages. Mean lengths of consumed and entangled fibers were similar, 1.9 and 2.7 mm, respectively. Additional research is needed to understand the positive and negative impacts of microfibers associated with pea crabs on both species.

Coping with current impacts: The case of Scyliorhinus canicula in the NW Mediterranean Sea and implications for human consumption

The small-spotted catshark (Scyliorhinus canicula) is a bottom-dwelling elasmobranch that represents the most discarded catch in terms of biomass in the Catalan coast (NW Mediterranean). Potential impacts affecting its population and food safety implications have been assessed in three localities along the Catalan coast. Distinct indicators were integrated, such as biological data, ingested anthropogenic items (plastic and cellulose-like items), parasitological indices, trace metal concentrations and histopathology using liver as target organ. Although high ingestion rates of fibres and levels of some heavy metals, they do not seem negatively affected by any major pathology nor by the current levels of pollutants. Small-scale differences among localities and depths were found and discussed. No zoonotic parasites were found. Encysted larvae of Grillotia adenoplusia and, above all, the levels of Hg found in the musculature, that are well over the European Commission limits, rise concerns regarding human consumption of S. canicula in this region.

Recent advances in microplastic removal from drinking water by coagulation: Removal mechanisms and influencing factors

Microplastics (MPs) are emerging contaminants that are widely detected in drinking water and pose a potential risk to humans. Therefore, the MP removal from drinking water is a critical challenge. Recent studies have shown that MPs can be removed by coagulation. However, the coagulation removal of MPs from drinking water remains inadequately understood. Herein, the efficiency, mechanisms, and influencing factors of coagulation for removing MPs from drinking water are critically reviewed. First, the efficiency of MP removal by coagulation in drinking water treatment plants (DWTPs) and laboratories was comprehensively summarized, which indicated that coagulation plays an important role in MP removal from drinking water. The difference in removal effectiveness between the DWTPs and laboratory was mainly due to variations in treatment conditions and limitations of the detection techniques. Several dominant coagulation mechanisms for removing MPs and their research methods are thoroughly discussed. Charge neutralization is more relevant for small-sized MPs, whereas large-sized MPs are more dependent on adsorption bridging and sweeping. Furthermore, the factors influencing the efficiency of MP removal were jointly analyzed using meta-analysis and a random forest model. The meta-analysis was used to quantify the individual effects of each factor on coagulation removal efficiency by performing subgroup analysis. The random forest model quantified the relative importance of the influencing factors on removal efficiency, the results of which were ordered as follows: MPs shape > Coagulant type > Coagulant dosage > MPs concentration > MPs size > MPs type > pH. Finally, knowledge gaps and potential future directions are proposed. This review assists in the understanding of the coagulation removal of MPs, and provides novel insight into the challenges posed by MPs in drinking water.

Sunlight-Driven Photochemical Removal of Polypropylene Microplastics from Surface Waters Follows Linear Kinetics and Does Not Result in Fragmentation

Floating microplastics are susceptible to sunlight-driven photodegradation, which can convert plastic carbon to dissolved organic carbon (DOC) and can facilitate microplastic fragmentation by mechanical forces. To understand the photochemical fate of sub-millimeter buoyant plastics, ∼0.6 mm polypropylene microplastics were photodegraded while tracking plastic mass, carbon, and particle size distributions. Plastic mass loss and carbon loss followed linear kinetics. At most time points DOC accumulation accounted for under 50% of the total plastic carbon lost. DOC accumulation followed sigmoidal kinetics, not the exponential kinetics previously reported for shorter irradiations. Thus, we suggest that estimates of plastic lifespan based on exponential DOC accumulation are inaccurate. Instead, linear plastic-C mass and plastic mass loss kinetics should be used, and these methods result in longer estimates of photochemical lifetimes for plastics in surface waters. Scanning electron microscopy revealed that photoirradiation produced two distinct patterns of cracking on the particles. However, size distribution analyses indicated that fragmentation was minimal. Instead, the initial population of microplastics shrank in size during irradiations, indicating photoirradiation in tranquil waters (i.e., without mechanical forcing) dissolved sub-millimeter plastics without fragmentation.

Microplastics: A potential proxy for tracing extreme flood events in estuarine environments

The transport of microplastics (MPs) is susceptible to being influenced by catchment hydrology; however, there is a notable lack of research on their retention and responses to flood events in estuarine sedimentary records. Herein, we collected two cores in the Yangtze Estuary to explore their microplastic pollution, influencing factors and linkage to flood events. MP abundance exhibited a decreasing trend from the top to the bottom in both cores. Both plastic production and sediment mean grain size showed a significant positive correlation with MP abundance. The sedimentary record displayed a marked surge in MP abundance during the extreme flood period, suggesting a direct influence of flooding on MP deposition. The resuspension of upstream MPs and erosion of land-based MPs by heavy rain might be responsible for this increase. Furthermore, our study identified significant periodicities in MP abundance, closely aligned with the hydrological patterns of the Yangtze River. This study highlights the role of floods in fluvial MP distribution and proposes MPs as a proxy of extreme floods from the 20th century in estuarine environments.

First national reference of microplastic contamination of French soils

The recent emergence of studies on plastic contamination of terrestrial environments has revealed the presence of microplastics (MP) in a variety of soil types, from the most densely populated areas to the most remote ones. However, the concentrations and chemical natures of MP in soils vary between studies, and only a few ones have focused on this issue in France. The MICROSOF project aimed to establish the first national references for French soil contamination by microplastics. 33 soil samples randomly chosen on the French soil quality-monitoring network were analyzed. The study collected data on the abundance of microplastics in the [315-5000] μm range, their chemical nature and size, as well as mass abundance estimates and other relevant information. Results demonstrated that 76 % of the soil samples contained microplastics, in concentrations ranging from <6.7 to 80 MP.kg-1 (dry soil). Most samples from croplands, grasslands and vineyards and orchards were contaminated, whereas only one sample from forest contained MP, suggesting an increased risk of microplastic contamination in soils exposed to agricultural practices. The MP abundances are not statistically different from similar studies, indicating an intermediate level of contamination in French soils. Despite intervention reports and surveys, the sources remain unclear at this stage. For the first time, an overview of the state of soil contamination in France, as well as the potential risks is provided.

Exposure assessment of plastics, phthalate plasticizers and their transformation products in diverse bio-based fertilizers

Bio-based fertilizers (BBFs) produced from organic waste have the potential to reduce societal dependence on limited and energy-intensive mineral fertilizers. BBFs, thereby, contribute to a circular economy for fertilizers. However, BBFs can contain plastic fragments and hazardous additives such as phthalate plasticizers, which could constitute a risk for agricultural soils and the environment. This study assessed the exposure associated with plastic and phthalates in BBFs from three types of organic wastes: agricultural and food industry waste (AgriFoodInduWaste), sewage sludge (SewSludge), and biowaste (i.e., garden, park, food and kitchen waste). The wastes were associated with various treatments like drying, anaerobic digestion, and vermicomposting. The number of microplastics (0.045-5 mm) increased from AgriFoodInduWaste-BBFs (15-258 particles g-1), to SewSludge-BBFs (59-1456 particles g-1) and then to Biowaste-BBFs (828-2912 particles g-1). Biowaste-BBFs mostly contained packaging plastics (e.g., polyethylene terephthalate), with the mass of plastic (>10 g kg-1) exceeding the EU threshold (3 g kg-1, plastics >2 mm). Other BBFs mostly contained small (< 1 mm) non-packaging plastics in amounts below the EU limit. The calculated numbers of microplastics entering agricultural soils via BBF application was high (107-1010 microplastics ha-1y-1), but the mass of plastic released from AgriFoodInduWaste-BBFs and SewSludge-BBFs was limited (< 1 and <7 kg ha-1y-1) compared to Biowaste-BBFs (95-156 kg ha-1y-1). The concentrations of di(2-ethylhexyl)phthalate (DEHP; < 2.5 mg kg-1) and phthalate transformation products (< 8 mg kg-1) were low (< benchmark of 50 mg kg-1 for DEHP), attributable to both the current phase-out of DEHP as well as phthalate degradation during waste treatment. The Biowaste-BBF exposed to vermicomposting indicated that worms accumulated phthalate transformation products (4 mg kg-1). These results are overall positive for the implementation of the studied AgriFoodInduWaste-BBFs and SewSludge-BBFs. However, the safe use of the studied Biowaste-BBFs requires reducing plastic use and improving sorting methods to minimize plastic contamination, in order to protect agricultural soils and reduce the environmental impact of Biowaste-BBFs.

New insights into the size-independent bioactive potential of pristine and UV-B aged polyethylene microplastics

The present study investigates the morphological, physicochemical, and structural changes occurred by the UV-B aging process of low-density polyethylene microplastics (LDPE MPs), as well as the bioactive potential of both pristine and UVaged MPs towards healthy peripheral blood lymphocytes. Specifically, LDPE MPs (100-180 μm) prepared by mechanical milling of LDPE pellets, were UV-B irradiated for 120 days (wavelength 280 nm; temperature 25 °C; relative humidity 50 %) and further examined for alterations in their particle size and surface, their functional groups, thermal stability, and crystallinity (by means of SEM, FTIR spectroscopy, XRD patterns, and TGA measurements, respectively). In parallel, isolated human peripheral blood lymphocytes were treated with different concentrations (25-500 μg mL-1) of either pristine or aged MPs (UVfree and UV120d LDPE MPs) for assessing the cytogenotoxic (by means of trypan blue exclusion test and the cytokinesis-block micronucleus assay using cytochalasin-B) and oxidative effects (using the DCFH-DA staining) in both cases. According to the results, UVfree and UV120d-LDPE MPs, with a size ranging from 100 to 180 μm, can differentially promote cytogenotoxic and oxidative alterations in human lymphocytes. In fact, UVfree LDPE MPs not being able to be internalized by cells due to their size, could indirectly promote the onset of mild oxidative and cytogenotoxic damage in human peripheral lymphocytes, via a dose-dependent but size-independent manner. The latter is more profound in case of the irregular-shaped UV120d-LDPE MPs, bearing improved dispersibility and sharp edges (by means of cracks and holes), as well as oxygen-containing and carbonyl groups. To our knowledge, the present findings provide new data regarding the bioactive behavior of pristine and UV-B aged LDPE MPs, at least in the in vitro biological model tested, thus giving new evidence for their size-independent and/or indirect mode of action.

Interaction of microplastics with heavy metals in soil: Mechanisms, influencing factors and biological effects

Microplastics (MPs) and heavy metals (HMs) in soil contamination are considered an emerging global problem that poses environmental and health risks. However, their interaction and potential biological effects remain unclear. Here, we reviewed the interaction of MPs with HMs in soil, including its mechanisms, influencing factors and biological effects. Specifically, the interactions between HMs and MPs mainly involve sorption and desorption. The type, aging, concentration, size of MPs, and the physicochemical properties of HMs and soil have significant impacts on the interaction. In particular, MP aging affects specific surface areas and functional groups. Due to the small size and resistance to decomposition characteristics of MPs, they are easily transported through the food chain and exhibit combined biological effects with HMs on soil organisms, thus accumulating in the human body. To comprehensively understand the effect of MPs and HMs in soil, we propose combining traditional experiments with emerging technologies and encouraging more coordinated efforts.

The interfacial interaction between typical microplastics and Pb2+ and their combined toxicity to Chlorella pyrenoidosa

Microplastics (MPs), a new type of pollutant, have attracted much attention worldwide. MPs are often complexed with other pollutants such as heavy metals, resulting in combined toxicity to organisms in the environment. Studies on the combined toxicity of MPs and heavy metals have usually focused on the marine, while on the freshwater are lacking. In order to understand the combined toxic effects of MPs and heavy metals in the freshwater, five typical MPs (PVC, PE, PP, PS, PET) were selected to investigate the adsorption characteristics of MPs to Pb2+ before and after the MPs aging by ultraviolet (UV) irradiation through static adsorption tests. The results showed that UV aging enhanced adsorption of Pb2+ by MPs. It is noteworthy that MPs-PET had the highest adsorption capacity for Pb2+, and the interaction between MPs-PET and Pb2+ was the strongest. We specifically selected MPs-PET to study its combined toxicity with Pb2+ to Chlorella pyrenoidosa. In the combined toxicity test, MPs-PET and Pb2+ had significant toxic effects on Chlorella pyrenoidosa in the individual exposure, and the toxicity of individual Pb2+ exposure was greater than that of individual MPs-PET exposure. In the combined exposure, when MPs-PET and Pb2+ without adsorption (MPs-PET/Pb2+), MPs-PET and Pb2+ had a synergistic effect, which would produce strong physical and chemical stress on Chlorella pyrenoidosa simultaneously, and the toxic effect was the most significant. After the adsorption of MPs-PET and Pb2+ (MPs-PET@Pb2+), the concentration and activity of Pb2+ decreased due to the adsorption and fixation of MPs-PET, and the chemical stress on Chlorella pyrenoidosa was reduced, but the physical stress of MPs-PET still existed and posed a serious threat to the survival of Chlorella pyrenoidosa. This study has provided a theoretical basis for further assessment of the potential environmental risks of MPs in combination with other pollutants such as heavy metals.

The possible impacts of nano and microplastics on human health: lessons from experimental models across multiple organs

The widespread production and use of plastics have resulted in accumulation of plastic debris in the environment, gradually breaking down into smaller particles over time. Nano-plastics (NPs) and microplastics (MPs), defined as particles smaller than 100 nanometers and 5 millimeters, respectively, raise concerns due to their ability to enter the human body through various pathways including ingestion, inhalation, and skin contact. Various investigators demonstrated that these particles may produce physical and chemical damage to human cells, tissues, and organs, disrupting cellular processes, triggering inflammation and oxidative stress, and impacting hormone and neurotransmitter balance. In addition, micro- and nano-plastics (MNPLs) may carry toxic chemicals and pathogens, exacerbating adverse effects on human health. The magnitude and nature of these effects are not yet fully understood, requiring further research for a comprehensive risk assessment. Nevertheless, evidence available suggests that accumulation of these particles in the environment and potential human uptake are causes for concern. Urgent measures to reduce plastic pollution and limit human exposure to MNPLs are necessary to safeguard human health and the environment. In this review, current knowledge regarding the influence of MNPLs on human health is summarized, including toxicity mechanisms, exposure pathways, and health outcomes across multiple organs. The critical need for additional research is also emphasized to comprehensively assess potential risks posed by degradation of MNPLs on human health and inform strategies for addressing this emerging environmental health challenge. Finally, new research directions are proposed including evaluation of gene regulation associated with MNPLs exposure.

Polyethylene microplastics induced gut microbiota dysbiosis leading to liver injury via the TLR2/NF-κB/NLRP3 pathway in mice

Microplastics (MPs) are ubiquitous environmental contaminants that have negative impacts on health and safety. The gut microbiota plays multiple roles as a newly discovered virtual metabolic organ. The objective of this study was to investigate the potential of MPs to cause liver injury by disrupting the balance of gut microbiota. The results indicated that exposure to MPs resulted in liver damage and disrupted the homeostasis of gut microbiota. MPs significantly reduced the liver organ coefficient, leading to liver cell injury and impaired function. Additionally, there was an increase in the expression of fibril-related proteins, which positively correlated with MPs concentration. Furthermore, MPs increased the relative abundances of Desulfovibrio, Clostridia, Enterorhabdus, Bacteroides, and Gemella while decreasing the abundance of Dubosoella. Different concentrations of MPs exhibited varying effects on specific bacterial groups, however, both concentrations resulted in an increase in pathogenic bacteria and a decrease in beneficial bacteria, as well as alterations in microbial structure. Moreover, MPs induced oxidative stress, inflammation, apoptosis and necrosis in liver cells. The study found that MPs disrupted gut microbiota homeostasis and activated TLR2/NF-κB/NLRP3 pathway in the liver, providing a new insight into the mechanism underlying MPs-induced liver injury. These findings serve as a warning regarding environmental pollution caused by MPs.

Microplastics and volatile organic compounds released from face masks after disinfection: Layers and materials differences

Effective disinfection methods are critical for ensuring the reusability of masks, yet these methods may inadvertently introduce health concerns associated with microplastics (MPs) and volatile organic compounds (VOCs). This study investigated the impact of ultraviolet germicidal irradiation (UVGI) and sodium hypochlorite (NaClO) bleaching on mask filter layers composed of four distinct materials. Our results revealed that UVGI induced more pronounced damage compared to bleaching, leading to the significant release of both MPs and VOCs. After UVGI treatment at conventional disinfection doses, meltblown (MB) fabrics released MPs reaching 864 ± 182 μg/g (92 ± 19 particles/g). For all filter layers, the quantity of released MPs followed the order: MB > HDPE>PU ≈ NW. These MPs were identified as degraded debris from the mask filter layers. The specific VOCs generated varied depending on the material composition. Non-woven (NW) and MB fabrics, both comprised of polypropylene, predominantly produced various branched aliphatic hydrocarbons and their derivative oxides. The cotton-like fabric, composed of high-density polyethylene, primarily emitted different linear aliphatic hydrocarbons and oxygenates. In contrast, the polyurethane filter layer of reusable masks released aromatic compounds, nitrogenous compounds, and their oxidation products. The formation of VOCs was primarily attributed to bond breakage and oxidative damage to the filter structure resulting from the disinfection process. In summary, as UVGI induced higher yields of MPs and VOCs compared to bleaching, the latter would be a safer option for mask disinfection.

Micro(nano)plastics in human urine: A surprising contrast between Chongqing's urban and rural regions

Microplastics (100 nm-5 mm) and nanoplastics (<100 nm) collectively referred to as micro(nano)plastics (MNPs), which are emerging pollutants all over the world. Environmental differences affect its distribution. The content of MNPs differs between urban and rural environments, according to previous studies. To understand the actual situation of human exposure to MNPs in various environments, this study collected 12 urine samples from volunteers in urban and rural regions of Chongqing and used pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) and laser direct infrared spectroscopy (LDIR) to detect and analyze MNPs in urine. With an average abundance of 1.50 (2.31) mg/kg, MNPs were found in 9 samples by Py-GC/MS. Polyethylene (PE), polyvinyl chloride (PVC) and polyamide 66 (PA66), three different types of MNPs were found, with PE content being the highest among them. By using LDIR, MNPs were found in 7 samples, with an average abundance of 15.17 (23.13) particles/kg. Five different types of MNPs were found, with acrylates (ACR) being the main type, followed by polymethylmethacrylate (PMMA), polyurethane (PU), polypropylene (PP), polyethylene terephthalate (PET). The findings demonstrated that urban region had much greater levels and more types of MNPs in human urine than rural. Additionally, regular contact with plastic toys and the use of personal care products are linked to the presence of MNPs. The influence of environmental factors on the actual exposure of the human body to MNPs was preliminary explored in this study, and two different methods were used for the first time to simultaneously detect and analyze MNPs in human urine. This allowed for the feasibility of comprehensively and effectively quantitatively analyzing the actual exposure of the human body to MNPs, and also provided the theoretical foundation for further research on the harm of MNPs to human health in different environments.

Tracking the micro- and nanoplastics in the terrestrial-freshwater food webs. Bivalves as sentinel species

Micro- (MPs) and nanoplastics (NPs) are currently ubiquitous in the ecosystems, and freshwater biota is still insufficiently studied to understand the global fate, transport paths, and consequences of their presence. Thus, in this study, we investigated the role of bivalves and a trophic transfer of MPs and NPs in an experimental food chain. The food chain consisted of terrestrial non-selective detritivore Dendrobaena (Eisenia) sp., freshwater benthic filter feeder Unio tumidus, and freshwater benthic detritivore-collectors Asellus aquaticus or Gammarus sp. Animals were exposed to different fluorescently labeled micro- and nanoplastics (PMMA 20 μm, nanoPS 15-18 nm, and 100 nm, PS 1 μm and 20 μm, PE from cosmetics) as well as to the faeces of animals exposed to plastics to assess their influence on the environmental transportation, availability to biota, and bioaccumulation of supplied particles. Damaged and intact fluorescent particles were observed in the faeces of terrestrial detritivores and in the droppings of aquatic filter feeders, respectively. They were also present in the guts of bivalves and of crustaceans which were fed with bivalve droppings. Bivalves (Unio tumidus, and additionally Unio pictorum, and Sphaerium corneum) produced droppings containing micro- and nanoparticles filtered from suspension and deposited them onto the tank bottom, making them available for broader feeding guilds of animals (e.g. collectors, like crustaceans). Finally, the natural ageing of PS and its morphological changes, leakage of the fluorescent labelling, and agglomeration of particles were demonstrated. That supports our hypothesis of the crucial role of the characterization of physical and chemical materials in adequately understanding the mechanisms of their interaction with biota. Microscopical methods (confocal, fluorescent, scanning electron) and Raman and FT-IR spectroscopy were used to track the particles' passage in a food web and monitor structural changes of the MPs' and NPs' surface.

Accumulation of microplastics in predatory birds near a densely populated urban area

The pollution due to plastic and other anthropogenic particles has steadily increased over the last few decades, presenting a significant threat to the environment and organisms, including avian species. This research aimed to investigate the occurrence of anthropogenic pollutants in the digestive and respiratory systems of four birds of prey: Common Buzzard (Buteo buteo), Black Kite (Milvus migrans), Eurasian Sparrowhawk (Accipiter nisus), and Northern Goshawk (Accipiter gentilis). The results revealed widespread contamination in all species with microplastics (MPs) and cellulosic anthropogenic fibers (AFs), with an average of 7.9 MPs and 9.2 AFs per specimen. Every digestive system contained at least one MP, while 65 % of specimens exhibited MPs in their respiratory systems. This is the work reporting a high incidence of MPs in the respiratory system of birds, clearly indicating inhalation as a pathway for exposure to plastic pollution. The content of MPs and AFs varied significantly when comparing specimens collected from central Madrid with those recovered from other parts of the region, including rural environments, suburban areas, or less populated cities. This result aligns with the assumption that anthropogenic particles disperse from urban centers to surrounding areas. Additionally, the dominant particle shape consisted of small-sized fibers (> 98 %), primarily composed of polyester, polyethylene, acrylic materials, and cellulose fibers exhibiting indicators of industrial treatment. These findings emphasize the necessity for further research on the impact of plastic and other anthropogenic material contamination in avian species, calling for effective strategies to mitigate plastic pollution.

Impacts of polypropylene microplastics on the distribution of cadmium, enzyme activities, and bacterial community in black soil at the aggregate level

Microplastics (MPs) can co-occur widely with heavy metals in soil. This study intended to investigate the influences of the co-exposure of polyethylene MPs (0.5 %, w/w) and cadmium (Cd) in black soil on the Cd distribution, enzyme activities, and bacterial communities in both bulk soil and different sized soil aggregates (> 1, 0.50-1, 0.25-0.50, and < 0.25 mm aggregates) after a 90-day incubation. Our results showed that the existence of MPs increased the distributions of Cd in >1 mm and < 0.25 mm soil aggregates and decreased its distributions in 0.50-1 mm and 0.25-0.50 mm soil aggregates. About 12.15 %-17.65 % and 9.03 %-11.13 % of Cd were distributed in the exchangeable and oxidizable forms in bulk soil and various sized soil aggregates after the addition of MPs which were higher than those in the only Cd-treated soil (11.17 %-14.72 % and 8.66 %-10.43 %, respectively), while opposite tendency was found for Cd in the reducible form. Urease and β-glucosidase activities in the Cd-treated soils were 1.14-1.18 and 1.07-1.31 times higher than those in the Cd-MPs treated soils. MPs disturbed soil bacterial community at phylum level and increased the bacteria richness in bulk soil. The levels of predicted functional genes which are linked to the biodegradation and metabolism of exogenous substances and soil C and N cycles were altered by the co-exposure of Cd and MPs. The findings of this study could help deepen our knowledge about the responses of soil properties, especially microbial community, to the co-occurrence of MPs and heavy metals in soil.

Development and validation of an acid/alkaline digestion method for efficient microplastic extraction from wastewater treatment plant effluents: Sulfuric acid concentration and contact time do matter

Accurate analysis of microplastic particles (MPs) in environmental samples requires removal of interferences during sample preparation. Wastewater samples are interference-rich and thus particularly challenging, with concentrated sulfuric acid currently deemed impractical as a reagent. Therefore, this study aimed to establish a straightforward, effective, and safe method employing concentrated sulfuric acid and potassium hydroxide to eliminate interferents from effluent samples obtained from wastewater treatment plants (WWTPs). We found that 80 % sulfuric acid at room temperature with a brief contact time of 5 min was viable through a qualitative spot test involving 37 plastics categorized into three types (I, II, and III) based on their polymer structure's oxygen position. A quantitative assessment revealed that treatments involving H2SO4 and KOH (20 %, 24 h, 48 °C), either separately or in combination, had no discernible physical impact on the overall plastics, except for a subtle one for Type III plastics (e.g., nylon and PMMA) known to be labile under harsh pH conditions. This acid/alkaline digestion (AAD) method, incorporating such conditions for H2SO4 and KOH treatments, yielded a high mass removal efficacy (97.8 ± 2.4 %, n = 13) for eliminating natural particle interferents for primary, secondary, and tertiary effluent samples. Furthermore, the AAD method allowed for the determination of MPs in effluents with high surrogate particle recoveries (e.g., 95.1 % for larger than 500 μm size fraction). This method is readily adaptable to create appropriate protocols for different types of environmental matrices.

Development of a multi-spectroscopy method coupling μ-FTIR and μ-Raman analysis for one-stop detection of microplastics in environmental and biological samples

Current techniques for microplastics (MPs) analysis are diverse. However, most techniques have individual limitations like the detection limit of spatial resolution, susceptibility, high cost, and time-consuming detection. In this study, we proposed a multi-spectroscopy method coupling μ-FTIR and μ-Raman analysis for one-stop MPs detection, in which barium fluoride was used as the substrate alternative to the filter membrane. Compared with commonly used filter membranes (alumina, silver, PTFE and nylon membranes), the barium fluoride substrate showed better spectroscopic detection performance on microscopic observation, broader transmittable wavenumber range for μ-FTIR (750-4000 cm-1) and μ-Raman (250-4000 cm-1) detection, thus suitable for the multi-spectroscopy analysis of spiked samples. Further, the real environmental and biological samples (indoor air, bottled water and human exhaled breath) were collected and detected to verify the applicability of the developed multi-spectroscopy method. The results indicated that the average content of detected MPs could be increased by 30.4 ± 29.9 % for indoor air, 17.1 ± 13.2 % for bottled water and 38.4 ± 16.0 % for human exhaled breath, respectively in comparison with widely used μ-Raman detection, which suggested that MPs exposure might be underestimated using single spectroscopy detection. Moreover, the majority of underestimated MPs were colored and smaller sized (<50 μm) MPs, which could pose higher risks to human body. In addition, the proposed method consumed lower sample pre-treatment costs and was environmental-friendly since the barium fluoride substrate could be used repeatedly after being cleaned by organic solvent with reliable results (n = 10, CV = 10 %, ICC = 0.961), which reduced the cost of MPs detection by at least 2.49 times compared with traditional methods using silver membrane.

Microplastics affect mosquito from aquatic to terrestrial lifestyles and are transferred to mammals through mosquito bites

Microplastics (MPs) transfer from the environment to living organisms is a nonignorable global problem. As a complete metamorphosis insect, the larvae and adult Culex quinquefasciatus mosquito live in aquatic and terrestrial environments, respectively, where they easily access MPs. However, little is known about mosquitoes' potential role in MPs accumulation throughout ecosystems. Therefore, we conducted a study with different MPs particle sizes (0.1/1/10 μm) and concentrations (0.5/5/50 μg/mL) on Cx. quinquefasciatus to address this issue. Once exposed at the young larval stage, MPs could accompany the mosquitoes their entire life. The fluorescence signals of MPs in the larvae were mainly located in the intestines. Its intensity increased (from 3.72 × 106 AU to 5.45 × 107 AU) as the concentrations of MPs increases. The fluorescence signals of MPs were also detected in the blood and skin tissues of mice bitten by adult mosquitoes with MPs containing in their bodies. Mosquitos exposed to MPs showed longer larval pupation and eclosion time as well as lower adult body weight. In addition, MPs significantly reduced the lethal effect of pyrethroid insecticides (97.77 % vs. 48.88 %, p < 0.05) with 15.1 % removal of the deltamethrin concentration. After MPs exposure, the relative abundance of the Cx. quinquefasciatus gut microbiome, such as Wolbachia spp., Elizabethkingia spp., and Asaia spp., changed as the MPs size and concentration changes. Mosquitoes provide a new pathway for MPs accumulation and transfer to higher-level living organisms. Moreover, MPs significantly reduce the control effect of deltamethrin, providing new guidelines for mosquito insecticide application in MPs contamination circumstances.

Preparation of synthetic micro- and nano plastics for method validation studies

Microplastic (MP) pollution is a persisting global problem. Accurate analysis is essential in quantifying the effects of microplastic pollution and develop novel technologies that reliably and reproducibly measure microplastic content in various samples. The most common methods for this are FTIR and Raman spectroscopy. Coloured, standardized beads are often used for method validation tests, which limits the conclusions to a very specific case rarely observed in the natural environment. This study focuses on the preparation of reference micro- and nanoplastics via cryogenic milling and shows their use for FTIR and Raman method validation studies. MPs can now be reproducibly milled from various plastics, offering the advantages of a better representation of MPs in real environment. Moreover, this study highlights issues with the current detection methods, up to now considered as the most reliable ones for MP detection and identification. Such issues, e.g. misidentification, will need to be addressed in the future. Additionally, milled MPs were used in experiments with commercial high-resolution imaging device, enabling a possible in-situ optical detection of microplastics. These experiments represent a step forward in understanding MPs in a water sample and provide a basis for a more accurate detection and identification directly from water, which would considerably reduce the time of analysis.

Combined effects of mulch film-derived microplastics and pesticides on soil microbial communities and element cycling

Pesticides and microplastics (MPs) derived from mulch film in agricultural soil can independently impact soil ecology, yet the consequences of their combined exposure remain unclear. Therefore, the effects of simultaneous exposure to commonly used pesticides (imidacloprid and flumioxazin) and aged mulch film-derived MPs on soil microorganisms and element cycles in cotton fields were investigated. The combined exposure influenced soil microorganisms, alongside processes related to carbon, nitrogen, and phosphorus cycles, exhibiting effects that were either neutralized or enhanced compared to individual exposures. The impact of pesticides in combined exposure was notably more significant and played a dominant role than that of MPs. Specifically, combined exposure intensified changes in soil bacterial community and symbiotic networks. The combined exposure neutralized NH4+, NO3-, DOC, and A-P contents, shifting from 0.33 % and 40.23 % increase in MPs and pesticides individually to a 40.24 % increase. Moreover, combined exposure resulted in the neutralization or amplification of the nitrogen-fixing gene nifH, nitrifying genes (amoA and amoB), and denitrifying genes (nirS and nirK), the carbon cycle gene cbbLG and the phosphorus cycle gene phoD from 0.48 and 2.57-fold increase to a 2.99-fold increase. The combined exposure also led to the neutralization or enhancement of carbon and nitrogen cycle functional microorganisms, shifting from a 1.53-fold inhibition and 10.52-fold increase to a 6.39-fold increase. These findings provide additional insights into the potential risks associated with combined pesticide exposure and MPs, particularly concerning soil microbial communities and elemental cycling processes.

Pollution characteristics and affecting factors of phthalate esters in agricultural soils in mainland China

Phthalate esters (PAEs), the most commonly produced and used plasticizers, are widely used in plastic products and agroecosystems, posing risks to agricultural products and human health. However, current research on PAE pollution characteristics in agricultural soils in China is not comprehensive; affecting factors and relationships with microplastics and plasticizer organophosphate esters have not been sufficiently considered. In this study, farmland soil samples were collected with field questionnaires on a national scale across mainland China. The results showed that the detection rate of PAEs was 100% and the Σ16PAEs concentrations were 23.5 - 903 μg/kg. The level of PAEs was highest in the greenhouse, and significantly higher than that in mulched farmland (p < 0.05). The PAE concentration in northwestern China was the lowest among different physical geographic zones. PAEs in farmlands posed a low cancer risk to Chinese people. PAE pollution in farmlands was significantly (p < 0.05) affected by agronomic measures (such as disposal method), environmental factors, and socioeconomic factors. Overall, PAEs were significantly and positively correlated (p < 0.05) with organophosphate esters but not with microplastics. This study aims to provide scientific data for relevant prevention and control policies, as well as actionable recommendations for pollution reduction.

Uptake and effect of carboxyl-modified polystyrene microplastics on cotton plants

Microplastics (MPs) have emerged as a significant global environmental concern, particularly within agricultural soil systems. The extensive use of plastic film mulching in cotton cultivation has led to the alarming presence of MP pollution in cotton fields. However, the uptake and effects of MPs on the growth of cotton plants are poorly understood. In this study, we conducted a comprehensive analysis of hydroponically cultured cotton seedlings at the phenotypic, transcriptional, and metabolic levels after exposure to carboxyl-modified polystyrene microplastics (PS-COOH). Treatment with three concentrations of PS-COOH (100, 300, and 500 mg/L) resulted in notable growth inhibition of treated plants and exhibited a dose-dependent effect. And, PS-COOH can invade cotton roots and be absorbed through the intercellular spaces via apoplastic uptake, with accumulation commensurate with treatment duration. Transcriptomic analysis showed significant up-regulation of genes associated with antioxidant activity in response to 300 mg/L PS-COOH treatment, suggesting the induction of oxidative stress. In addition, the PS-COOH treatment activated the phenylpropanoid biosynthesis pathway, leading to lignin and flavonoid accumulation, and altered sucrose catabolism. These findings illustrate the absorption and effects of MPs on cotton seedlings and offer valuable insights into the potential toxicity of MPs to plants in soil mulched with plastic film.

Assessment of dietary polyvinylchloride, polypropylene and polyethylene terephthalate exposure in Nile tilapia, Oreochromis niloticus: Bioaccumulation, and effects on behaviour, growth, hematology and histology

Microplastics (MPs) have been recognized as emerging aquatic pollutants receiving major concern due to their detrimental effects on aquatic life. Nile Tilapia, Oreochromis niloticus is a model species considered in toxicological studies to address the effects of pollutants in freshwater animals. However, comprehensive knowledge comparing the impacts on fish across various MPs polymers is scarce. Therefore, the overarching aim of the current study was to examine the bioconcentration of MPs polymers: polyvinylchloride (PVC), polypropylene (PP), and polyethylene terephthalate (PET), and their toxic effects on growth, and behavioral responses, hematology, and histology of gills, liver, and intestine in O. niloticus. Fishes were subjected to a 21-day dietary exposure to MPs by assigning them into six treatment groups: T1 (4% of PVC), T2 (4% of PP), T3 (4% of PET), T4 (8% of PVC), T5 (8% of PP), T6 (8% of PET), and control (0% of MPs), to assess the effects on fish across the polymers and dosage. Results showed several abnormalities in anatomical and behavioral parameters, lower growth, and high mortality in MPs-exposed fish, indicating a dose-dependent relationship. The elevated dosage of polymers raised the bioavailability of PVC, PP, and PET in gills and gut tissues. Noteworthy erythrocyte degeneration referred to cytotoxicity and stress imposed by MPs, whereas the alterations in hematological parameters were possibly due to blood cell damage, also indicating mechanisms of defense against MPs toxicity. Histopathological changes in the gills, liver, and intestine confirmed the degree of toxicity and associated dysfunctions in fish. A higher sensitivity of O. niloticus to PET-MPs compared to other polymers is likely due to its chemical properties and species-specific morphological and physiological characteristics. Overall, the present study reveals valuable insights into the emerging threat of MPs toxicity in freshwater species, which could be supportive of future toxicological research.

Polystyrene microplastic-induced oxidative stress triggers intestinal barrier dysfunction via the NF-κB/NLRP3/IL-1β/MCLK pathway

Emerging evidence has demonstrated the association between microplastics (MPs) with a diameter of <5 mm and the risk of intestinal diseases. However, the molecular mechanisms contributing to MP-induced intestinal barrier dysfunction have not been fully appreciated. In this study, C57BL/6 J mice were exposed to polystyrene microplastics (PS-MPs, 0.2, 1 or 5 μm) at 1 mg/kg body weight daily by oral gavage for 28 days. We found that PS-MPs exposure induced oxidative stress and inflammatory cell infiltration in mice colon, leading to an increased expression of pro-inflammatory cytokine. Moreover, there were an increase in intestinal permeability and decrease in mucus secretion, accompanied by downregulation of tight junction (TJ)-related zonula occluden-1 (ZO-1), occluding (OCLN) and claudin-1 (CLDN-1) in mice colon. Especially, 5 μm PS-MPs (PS5)-induced intestinal epithelial TJ barrier damage was more severe than 0.2 μm PS-MPs (PS0.2) and 1 μm PS-MPs (PS1). In vitro experiments indicated that PS5-induced oxidative stress upregulated the expression of nuclear factor kappa B (NF-κB), nucleotide-binding domain and leucine-rich repeat protein 3 (NLRP3) inflammasome, and myosin light chain kinase (MLCK). Meanwhile, pre-treatment with the antioxidant NAC, NLRP3 inhibitor MCC950 and MLCK inhibitor ML-7 considerably reduced PS5-triggered reactive oxygen species (ROS) production and inflammatory response, inhibited the activation of the NF-κB/NLRP3/MLCK pathway, and upregulated ZO-1, OCLN and CLDN-1 expression in Caco-2 cells. Taken together, our study demonstrated that PS-MPs cause intestinal barrier dysfunction through the ROS-dependent NF-κB/NLRP3/IL-1β/MLCK pathway.

Comparison of ATR-FTIR and NIR spectroscopy for identification of microplastics in biosolids

Biosolids are considered a potentially major input of microplastics (MPs) to agricultural soils. Our study aims to identify the polymeric origin of MPs extracted from biosolid samples by comparing their Attenuated Total Reflection (ATR) - Fourier-transform infrared (FTIR) spectra with the corresponding near-infrared (NIR) spectra. The reflectance spectra were preprocessed by Savitzky-Golay (SG), first derivative (FD) and compared with analogous spectra acquired on a set of fifty-two selected commercial plastic (SCP) materials collected from readily available products. According to the results portrayed in radar chart and built from both ATR-FTIR and NIR spectral datasets, the MPs showed high correlations with polymers such as polyethylene (LDPE, HDPE), polyethylene terephthalate (PET), polystyrene (PS), polypropylene (PP) and polyamide (PA), determined in SCP samples. Each unknown MP sample had on average three or more links to several types of SCP, according to the correlation coefficients for each polymer ranging from 0.7 up to 1. The comparison analysis classified the majority of MPs as composed mainly by LDPE/HDPE, according to the top correlation coefficients (r > 0.90). PP and PET were better identified with NIR than ATR-FTIR. In contrast to ATR-FTIR analysis, NIR was unable to identify PS. Based on these results, the primary sources of MPs in the biosolids could be identified as discarded consumer packaging (containers, bags, bottles) and fibers from laundry, disposable glove, and cleaning cloth. SYNOPSIS: Microplastics (MPs) are considered contaminants of emerging concern. This study compares two simple and fast spectroscopy techniques to identify microplastics in the biosolid matrix.