101
|
Peters SB, Naim N, Nelson DA, Mosier AP, Cady NC, Larsen M. Biocompatible tissue scaffold compliance promotes salivary gland morphogenesis and differentiation. Tissue Eng Part A 2014; 20:1632-42. [PMID: 24410370 PMCID: PMC4029047 DOI: 10.1089/ten.tea.2013.0515] [Citation(s) in RCA: 32] [Impact Index Per Article: 3.2] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/16/2013] [Accepted: 12/12/2013] [Indexed: 12/14/2022] Open
Abstract
Substrate compliance is reported to alter cell phenotype, but little is known about the effects of compliance on cell development within the context of a complex tissue. In this study, we used 0.48 and 19.66 kPa polyacrylamide gels to test the effects of the substrate modulus on submandibular salivary gland development in culture and found a significant decrease in branching morphogenesis in explants grown on the stiff 19.66 kPa gels relative to those grown on the more physiologically compliant 0.48 kPa gels. While proliferation and apoptosis were not affected by the substrate modulus, tissue architecture and epithelial acinar cell differentiation were profoundly perturbed by aberrant, high stiffness. The glands cultured on 0.48 kPa gels were similar to developing glands in morphology and expression of the differentiation markers smooth muscle alpha-actin (SM α-actin) in developing myoepithelial cells and aquaporin 5 (AQP5) in proacinar cells. At 19.66 kPa, however, tissue morphology and the expression and distribution of SM α-actin and AQP5 were disrupted. Significantly, aberrant gland development at 19.66 kPa could be rescued by both mechanical and chemical stimuli. Transfer of glands from 19.66 to 0.48 kPa gels resulted in substantial recovery of acinar structure and differentiation, and addition of exogenous transforming growth factor beta 1 at 19.66 kPa resulted in a partial rescue of morphology and differentiation within the proacinar buds. These results indicate that environmental compliance is critical for organogenesis, and suggest that both mechanical and chemical stimuli can be exploited to promote organ development in the contexts of tissue engineering and organ regeneration.
Collapse
|
102
|
Shvero DK, Zatlsman N, Hazan R, Weiss EI, Beyth N. Characterisation of the antibacterial effect of polyethyleneimine nanoparticles in relation to particle distribution in resin composite. J Dent 2014; 43:287-94. [PMID: 24881908 DOI: 10.1016/j.jdent.2014.05.003] [Citation(s) in RCA: 19] [Impact Index Per Article: 1.9] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/06/2014] [Revised: 05/01/2014] [Accepted: 05/05/2014] [Indexed: 11/15/2022] Open
Abstract
OBJECTIVES To characterise the antibacterial effect of resin composite incorporating cross-linked quaternised polyethyleneimine (QPEI) nanoparticles in relation to their distribution in the bulk material. METHODS The antibacterial effect of resin composite incorporating QPEI nanoparticle was tested against various oral pathogens, including Enterococcus faecalis, Streptococcus mutans, Actinomyces viscousus, Lactobacilus casei and whole saliva. Nanoparticle distribution in the modified resin composite was assessed using X-ray photoelectron spectroscopy (XPS). Additionally, the degree of conversion was recorded. RESULTS Total bacterial inhibition was detected against all the tested pathogens following direct contact with the outer surface of the modified resin composite. Similarly, the inner surface of the modified resin composite caused total inhibition. Electron microscope images showed bacterial death. XPS revealed surface I(-) ions on both the outer and the inner surfaces of the modified composite. No I(-) ions were detected in the unmodified composite. Nanoparticle distribution was higher on the inner surface of the modified composite. The composite's degree of conversion was unaffected by nanoparticle addition. CONCLUSIONS QPEI nanoparticles represent a new generation of antibacterial nanoparticles which are highly promising in preventing bacterial recontamination when restoring teeth.
Collapse
|
103
|
Lee JH, Kim YG, Cho HS, Kim J, Kim SC, Cho MH, Lee J. Thermoresponsive oligomers reduce Escherichia coli O157:H7 biofouling and virulence. BIOFOULING 2014; 30:627-637. [PMID: 24735097 DOI: 10.1080/08927014.2014.907402] [Citation(s) in RCA: 8] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/03/2023]
Abstract
Thermoresponsive polymers have potential biomedical applications for drug delivery and tissue engineering. Here, two thermoresponsive oligomers were synthesized, viz. oligo(N-isopropylacrylamide) (ONIPAM) and oligo(N-vinylcaprolactam) (OVCL), and their anti-biofouling abilities investigated against enterohemorrhagic E. coli O157:H7, which produces Shiga-like toxins and forms biofilms. Biofilm formation (biofouling) is closely related to E. coli O157:H7 infection and constitutes a major mechanism of antimicrobial resistance. The synthetic OVCL (MW 679) and three commercial OVCLs (up to MW 54,000) at 30 μg ml(-1) were found to inhibit biofouling by E. coli O157:H7 at 37 °C by more than 80% without adversely affecting bacterial growth. The anti-biofouling activity of ONIPAM was weaker than that of OVCL. However, at 25 °C, ONIPAM and OVCL did not affect E. coli O157:H7 biofouling. Transcriptional analysis showed that OVCL temperature-dependently downregulated curli genes in E. coli O157:H7, and this finding was in line with observed reductions in fimbriae production and biofouling. In addition, OVCL downregulated the Shiga-like toxin genes stx1 and stx2 in E. coli O157:H7 and attenuated its in vivo virulence in the nematode Caenorhabditis elegans. These results suggest that OVCL has potential use in antivirulence strategies against persistent E. coli O157:H7 infection.
Collapse
|
104
|
Memon AR, Andresen J, Habib M, Jaffar M. Simulated sugar factory wastewater remediation kinetics using algal-bacterial raceway reactor promoted by polyacrylate polyalcohol. BIORESOURCE TECHNOLOGY 2014; 157:37-43. [PMID: 24530948 DOI: 10.1016/j.biortech.2014.01.047] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.1] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/30/2013] [Revised: 01/11/2014] [Accepted: 01/14/2014] [Indexed: 06/03/2023]
Abstract
The remediation kinetics of simulated sugar factory wastewater (SFW) using an algal-bacterial culture (ABC) of Chlorella vulgaris in association with Pseudomonas putida in a raceway reactor was found to be enhanced by 89% with the addition of 80ppm of copolymer Polyacrylate polyalcohol (PAPA). This was achieved by efficient suspension of the ABC throughout the water body maintaining optimum pH and dissolved oxygen that led to rapid COD removal and improved algal biomass production. The suspension of the ABC using the co-polymer PAPA maintained a DO of 8-10mgl(-1) compared to 2-3mgl(-1) when not suspended. As a result, the non-suspended ABC only achieved a 50% reduction in COD after 96h compared to a 89% COD removal using 80ppm PAPA suspension. In addition, the algae biomass increased from 0.4gl(-1)d(-1) for the non-suspended ABC to 1.1gl(-1)d(-1) when suspended using 80ppm PAPA.
Collapse
|
105
|
Lee MF, Yang KJ, Wang NM, Chiu YT, Chen PC, Chen YH. The development of a murine model for Forcipomyia taiwana (biting midge) allergy. PLoS One 2014; 9:e91871. [PMID: 24651257 PMCID: PMC3961268 DOI: 10.1371/journal.pone.0091871] [Citation(s) in RCA: 7] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [MESH Headings] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/23/2013] [Accepted: 02/15/2014] [Indexed: 11/18/2022] Open
Abstract
BACKGROUND Forcipomyia taiwana (biting midge) allergy is the most prevalent biting insect allergy in Taiwan. An animal model corresponding to the human immuno-pathologic features of midge allergy is needed for investigating the mechanisms and therapies. This study successfully developed a murine model of Forcipomyia taiwana allergy. METHODS BALB/c mice were sensitized intra-peritoneally with midge extract on days 0, 7, 14, 21 then intra-dermally on days 28, 31 and 35. Serum midge-specific IgE, IgG1, and IgG2a were measured every 14 days by indirect ELISA. The mice were challenged intradermally with midge extract at day 40 and then sacrificed. Proliferation and cytokine production of splenocytes after stimulation with midge extract were determined by MTT assay and ELISA, respectively. The cytokine mRNA expression in response to midge stimulation was analyzed by RT-PCR. RESULTS Serum IgE, total IgG, and IgG1 antibody levels against midge extract were significantly higher in the midge-sensitized mice than in the control mice. After the two-step sensitization, all mice in the midge-sensitized group displayed immediate itch and plasma extravasation reactions in response to challenge with midge extract. Skin histology from midge-sensitized mice showed marked eosinophil and lymphocyte infiltrations similar to that observed in humans. Stimulation of murine splenocytes with midge extract elicited significant proliferation, IL-4, IL-10, IL-13 and IFN-γ protein production, and up-regulation of mRNA in a dose-dependent manner in the midge-sensitized group, but not in the control group. CONCLUSIONS A murine model of midge bite allergy has been successfully developed using a two-step sensitization protocol. The sensitized mice have very similar clinical and immunologic reactions to challenge with midge proteins as the reactions of human to midge bites. This murine model may be a useful platform for future research and the development of treatment strategies for insect bite allergy.
Collapse
|
106
|
Levenson EA, Kiick KL. DNA-polymer conjugates for immune stimulation through Toll-like receptor 9 mediated pathways. Acta Biomater 2014; 10:1134-45. [PMID: 24316364 DOI: 10.1016/j.actbio.2013.11.022] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/28/2013] [Revised: 10/01/2013] [Accepted: 11/24/2013] [Indexed: 01/01/2023]
Abstract
Oligodeoxynucleotides (ODNs) containing unmethylated CpG dinucleotide motifs are agonists of Toll-like receptor 9 and are currently being investigated for use as vaccine adjuvants through the promotion of type I immunity. Several classes of ODN have been developed which differ in their propensity to aggregate, which in turn alters cytokine profiles and cellular subsets activated. Although aggregation state is correlated with the change in cytokine response, it is unknown if this results from a change in the number of ODNs available for binding and/or the possible engagement of multiple TLR9 molecules. Here, we examined the role of ligand valency on the activation of TLR9 through the synthesis of ODN-poly(acrylic acid) (PAA) conjugates. The compositions and size of the conjugates were characterized by UV-vis spectroscopy, proton nuclear magnetic resonance, gel permeation chromatography and dynamic light scattering. Enzyme-linked immunosorbent assays of cytokine secretion by murine-like macrophages indicate that these ODN-PAA polymer conjugates show enhanced immunostimulation at 100-fold lower concentrations than those required for ODN alone, for both TNF-α and IL-6 release, and are more potent than any other previously reported multivalent ODN constructs. Increasing valency was shown to significantly enhance cytokine expression, particularly for IL-6. Knockdown by siRNA demonstrates that these polymer conjugates are specific to TLR9. Our results define valency as a critical design parameter and polymer conjugation as an advantageous strategy for producing ODN immunomodulatory agents.
Collapse
|
107
|
Hazeltine LB, Badur MG, Lian X, Das A, Han W, Palecek SP. Temporal impact of substrate mechanics on differentiation of human embryonic stem cells to cardiomyocytes. Acta Biomater 2014; 10:604-12. [PMID: 24200714 PMCID: PMC3889126 DOI: 10.1016/j.actbio.2013.10.033] [Citation(s) in RCA: 52] [Impact Index Per Article: 5.2] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/02/2013] [Revised: 10/16/2013] [Accepted: 10/28/2013] [Indexed: 12/13/2022]
Abstract
A significant clinical need exists to differentiate human pluripotent stem cells (hPSCs) into cardiomyocytes, enabling tissue modeling for in vitro discovery of new drugs or cell-based therapies for heart repair in vivo. Chemical and mechanical microenvironmental factors are known to impact the efficiency of stem cell differentiation, but cardiac differentiation protocols in hPSCs are typically performed on rigid tissue culture polystyrene (TCPS) surfaces, which do not present a physiological mechanical setting. To investigate the temporal effects of mechanics on cardiac differentiation, we cultured human embryonic stem cells (hESCs) and their derivatives on polyacrylamide hydrogel substrates with a physiologically relevant range of stiffnesses. In directed differentiation and embryoid body culture systems, differentiation of hESCs to cardiac troponin T-expressing (cTnT+) cardiomyocytes peaked on hydrogels of intermediate stiffness. Brachyury expression also peaked on intermediate stiffness hydrogels at day 1 of directed differentiation, suggesting that stiffness impacted the initial differentiation trajectory of hESCs to mesendoderm. To investigate the impact of substrate mechanics during cardiac specification of mesodermal progenitors, we initiated directed cardiomyocyte differentiation on TCPS and transferred cells to hydrogels at the Nkx2.5/Isl1+ cardiac progenitor cell stage. No differences in cardiomyocyte purity with stiffness were observed on day 15. These experiments indicate that differentiation of hESCs is sensitive to substrate mechanics at early stages of mesodermal induction, and proper application of substrate mechanics can increase the propensity of hESCs to differentiate to cardiomyocytes.
Collapse
|
108
|
Ren J, Deng SQ, Jiang XH, Wang LL, Xiao Y. [Enhancers on the transmembrane transport of chlorogenic acid]. YAO XUE XUE BAO = ACTA PHARMACEUTICA SINICA 2014; 49:252-255. [PMID: 24761618] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Subscribe] [Scholar Register] [Indexed: 06/03/2023]
Abstract
To investigate the influence of the difference enhancers on the transport mechanism of chlorogenic acid (CGA) across Caco-2 cells model, a RP-HPLC method was adopted to detect the concentrations of CGA. At the concentrations of 20 to 80 microg x mL(-1), the difference of absorption rate constants (K(a)) was not statistically significant. At the concentrations of 40 and 20 microg x mL(-1), the ratios of apparent permeability coefficients (P(app)) of the apical to basolateral and the basolateral to apical were 1.14 and 1.18, respectively. With the effect of enhancers K(a) and P(app) increased, the absorption half-life (T1/2) decreased. CGA passed through the Caco-2 cell membrane mainly by passive transport. It showed that monocarboxylic acid transporter (MCT) could be involved in the across membrane transport process of CGA. Borneol had no effect on the cell membrane transport processes. The order of increasing absorption of CGA caused by the enhancers was sodium lauryl sulphate > sodium taurocholate > carbomer.
Collapse
|
109
|
Li J, Han D, Zhao YP. Kinetic behaviour of the cells touching substrate: the interfacial stiffness guides cell spreading. Sci Rep 2014; 4:3910. [PMID: 24468681 PMCID: PMC5379211 DOI: 10.1038/srep03910] [Citation(s) in RCA: 68] [Impact Index Per Article: 6.8] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/08/2013] [Accepted: 01/13/2014] [Indexed: 11/08/2022] Open
Abstract
To describe detailed behaviour of cell spreading under the influence of substrate stiffness, A549 cells cultured on the surfaces of polydimethylsiloxane (PDMS) and polyacrylamide (PAAm) with bulk rigidities ranging from 0.1 kPa to 40 kPa were in situ observed. The spreading behaviour of cells on PAAm presented a positive correlation between spreading speed and substrate stiffness. After computing the deformations of PAAm gels and collagen, the bulk stiffness of PAAm, rather than matrix tethering, determined the cell behaviour. On the other hand, spreading behaviour of the cells was unaffected by varying the bulk stiffness of PDMS. Based on simulation analyses, the elasticity of silica-like layer induced by UV radiation on PDMS surface dominated cell-substrate interaction, rather than the bulk stiffness of the material, indicating that it is the interfacial stiffness that mainly guided the cell spreading. And then the kinetics of cell spreading was for the first time modeled based on absolute rate theory.
Collapse
|
110
|
Lee J, Abdeen AA, Huang TH, Kilian KA. Controlling cell geometry on substrates of variable stiffness can tune the degree of osteogenesis in human mesenchymal stem cells. J Mech Behav Biomed Mater 2014; 38:209-18. [PMID: 24556045 DOI: 10.1016/j.jmbbm.2014.01.009] [Citation(s) in RCA: 62] [Impact Index Per Article: 6.2] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/19/2013] [Revised: 12/12/2013] [Accepted: 01/14/2014] [Indexed: 12/13/2022]
Abstract
The physical properties of the extracellular matrix (ECM) play an important role in regulating tissue-specific human mesenchymal stem cell (MSC) differentiation. Protein-coated hydrogels with tunable stiffness have been shown to influence lineage specific gene expression in MSCs. In addition, the control of cell shape - either through changing substrate stiffness or restricting spreading with micropatterning - has proved to be important in guiding the differentiation of MSCs. However, few studies have explored the interplay between these physical cues during MSC lineage specification. Here, we demonstrate geometric control of osteogenesis in MSCs cultured on micropatterned polyacrylamide gels. Cells cultured on fibronectin-coated gels express markers associated with osteogenesis in a stiffness dependent fashion with a maximum at ~30kPa. Controlling the geometry of single cells across the substrate demonstrates elevated osteogenesis when cells are confined to shapes that promote increased cytoskeletal tension. Patterning MSCs across hydrogels of variable stiffness will enable the exploration of the interplay between these physical cues and their relationship with the mechanochemical signals that guide stem cell fate decisions.
Collapse
|
111
|
Haraguchi Y, Shimizu T, Matsuura K, Sekine H, Tanaka N, Tadakuma K, Yamato M, Kaneko M, Okano T. Cell sheet technology for cardiac tissue engineering. Methods Mol Biol 2014; 1181:139-155. [PMID: 25070334 DOI: 10.1007/978-1-4939-1047-2_13] [Citation(s) in RCA: 22] [Impact Index Per Article: 2.2] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 06/03/2023]
Abstract
In this chapter, we describe the methods for the fabrication and transfer/transplantation of 3D tissues by using cell sheet technology for cardiac tissue regeneration. A temperature-responsive culture surface can be fabricated by grafting a temperature-responsive polymer, poly(N-isopropylacrylamide), onto a polystyrene cell culture surface. Cells cultured confluently on such a culture surface can be recovered as an intact cell sheet, and functional three-dimensional (3D) tissues can then be easily fabricated by layering the recovered cell sheets without any scaffolds or complicated manipulation. Cardiac cell sheets, myoblast sheets, mesenchymal stem cell sheets, cardiac progenitor cell sheets, etc., which are prepared from temperature-responsive culture surfaces, can be easily transplanted onto heart tissues of animal models, and those cell sheet constructs enhance the cell transplant efficiency, resulting in the induction of effective therapy.
Collapse
|
112
|
Abstract
We describe the design of micropatterned surfaces for single cell studies, based on photo-patterned thermoresponsive polymer brushes. Such surfaces allow for spatially controlled cell adhesion at 37°CC and thermal harvesting of the studied cells at T <32°CC.
Collapse
|
113
|
Rosman BM, Barbosa JABA, Passerotti CP, Cendron M, Nguyen HT. Evaluation of a novel gel-based ureteral stent with biofilm-resistant characteristics. Int Urol Nephrol 2013; 46:1053-8. [PMID: 24366763 DOI: 10.1007/s11255-013-0636-3] [Citation(s) in RCA: 15] [Impact Index Per Article: 1.4] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/03/2013] [Accepted: 12/16/2013] [Indexed: 11/25/2022]
Abstract
PURPOSE Current ureteral stents, while effective at maintaining a ureteral lumen, provide a substrate for bacterial growth. This propensity for biofilm formation may be a nidus for bacterial growth leading to infection and a reason for early removal of a stent before it is clinically indicated. A newly devised stent, composed of a highly hydrated, partially hydrolyzed polyacrylonitrile polymer, is believed to have bacterial resistant properties. The objective of this study is to evaluate the biofilm growth and bacterial resistant properties of this novel stent. MATERIALS AND METHODS Multiple 1 cm sections of the pAguaMedicina™ Pediatric Ureteral Stent (pAMS) (Q Urological, Natick, MA) and the conventional polymer stent (SS) (Boston Scientific, Natick, MA) were incubated for 3 days in the 3 different growth media. Afterward, J96 human pathogenic Escherichia coli was added. At 3, 6, 9, 12, and 15 days following bacterial inoculation, the stent segments were washed, sonicated, and analyzed for bacterial growth. Scanning electron microscopy (SEM) imaging was performed to assess biofilm formation. RESULTS pAMS demonstrated significant reductions (43-71 %) in bacterial counts when compared to standard stents in all conditions tested. SEM imaging demonstrated biofilm formation on both types of stents in all media, with a relative reduction in apparent cell debris and bacteria on the pAMS. CONCLUSIONS In this study, the gel-based stent shows a demonstrable reduction in bacterial counts and biofilm formation. The use of the pAMS may reduce the risk of infection associated with stent usage.
Collapse
|
114
|
Kuan YH, Huang FM, Lee SS, Li YC, Chang YC. Bisgma stimulates prostaglandin E2 production in macrophages via cyclooxygenase-2, cytosolic phospholipase A2, and mitogen-activated protein kinases family. PLoS One 2013; 8:e82942. [PMID: 24376609 PMCID: PMC3871582 DOI: 10.1371/journal.pone.0082942] [Citation(s) in RCA: 19] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/17/2013] [Accepted: 11/07/2013] [Indexed: 12/18/2022] Open
Abstract
BACKGROUND Bisphenol A-glycidyl-methacrylate (BisGMA) employs as a monomer in dental resins. The leakage of BisGMA from composite resins into the peripheral environment can result in inflammation via macrophage activation. Prostaglandin E2 (PGE2) is a key regulator of immunopathology in inflammatory reactions. Little is known about the mechanisms of BisGMA-induced PGE2 expression in macrophage. The aim of this study was to evaluate the signal transduction pathways of BisGMA-induced PGE2 production in murine RAW264.7 macrophages. METHODOLOGY/PRINCIPAL FINDINGS Herein, we demonstrate that BisGMA can exhibit cytotoxicity to RAW264.7 macrophages in a dose- and time-dependent manner (p<0.05). In addition, PGE2 production, COX-2 expression, and cPLA2 phosphorylation were induced by BisGMA on RAW264.7 macrophages in a dose- and time-dependent manner (p<0.05). Moreover, BisGMA could induce the phosphorylation of ERK1/2 pathway (MEK1/2, ERK1/2, and Elk), p38 pathway (MEK3/6, p38, and MAPKAPK2), and JNK pathway (MEK4, JNK, and c-Jun) in a dose- and time-dependent manner (p<0.05). Pretreatment with AACOCF3, U0126, SB203580, and SP600125 significantly diminished the phosphorylation of cPLA2, ERK1/2, p38, and JNK stimulated by BisGMA, respectively (p<0.05). BisGMA-induced cytotoxicity, cPLA2 phosphorylation, PGE2 generation, and caspases activation were reduced by AACOCF3, U0126, SB203580, and SP600125, respectively (p<0.05). CONCLUSIONS These results suggest that BisGMA induced-PGE2 production may be via COX-2 expression, cPLA2 phosphorylation, and the phosphorylation of MAPK family. Cytotoxicity mediated by BisGMA may be due to caspases activation through the phosphorylation of cPLA2 and MAPKs family.
Collapse
|
115
|
Viravaidya-Pasuwat K, Wong-in S, Sakulaue P, Siriwatwechakul W. Construction of a chondrocyte cell sheet using temperature-responsive poly(N-isopropylacrylamide)-co-acrylamide. ANNUAL INTERNATIONAL CONFERENCE OF THE IEEE ENGINEERING IN MEDICINE AND BIOLOGY SOCIETY. IEEE ENGINEERING IN MEDICINE AND BIOLOGY SOCIETY. ANNUAL INTERNATIONAL CONFERENCE 2013; 2013:6969-72. [PMID: 24111348 DOI: 10.1109/embc.2013.6611161] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/09/2022]
Abstract
In this study, a novel temperature-responsive poly(N-isopropylacrylamide)-co-acrylamide was used to prepare a chondrocyte cell sheet. Chondrocytes were isolated from human articular cartilage and plated on the copolymer film grafted tissue culture plates. The cell attachment on the copolymer film was shown to be similar to that of the ungrafted surface. To harvest a cell sheet, the incubation temperature was reduced to 10°C for 30 minutes to allow the polymer chain to fully extend, changing the copolymer's phase from hydrophobicity to hydrophilicity. Additional incubation at 20°C for 60 minutes was necessary to activate the cellular metabolism required for cytoskeletal organization and cell detachment. A complete cell sheet recovery was achieved when a PVDF membrane was used as a cell sheet carrier. Unfortunately, the shrinkage of the cell sheet was observed. Nonetheless, the harvested cell sheet was shown to be viable and healthy.
Collapse
|
116
|
Yu Q, Cho J, Shivapooja P, Ista LK, López GP. Nanopatterned smart polymer surfaces for controlled attachment, killing, and release of bacteria. ACS APPLIED MATERIALS & INTERFACES 2013; 5:9295-304. [PMID: 24041191 DOI: 10.1021/am4022279] [Citation(s) in RCA: 156] [Impact Index Per Article: 14.2] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/21/2023]
Abstract
Model surfaces with switchable functionality based on nanopatterned, thermoresponsive poly(N-isopropylacrylamide) (PNIPAAm) brushes were fabricated using interferometric lithography combined with surface-initiated polymerization. The temperature-triggered hydration and conformational changes of nanopatterned PNIPAAm brushes reversibly modulate the spatial concealment and exposure of molecules that are immobilized in the intervals between nanopatterned brushes. A biocidal quaternary ammonium salt (QAS) was used to demonstrate the utility of nanopatterned PNIPAAm brushes to control biointerfacial interactions with bacteria. QAS was integrated into polymer-free regions of the substrate between nanopatterned PNIPAAm brushes. The biocidal efficacy and release properties of these surfaces were tested against Escherichia coli K12. Above the lower critical solution temperature (LCST) of PNIPAAm, desolvated, collapsed polymer chains facilitate the attachment of bacteria and expose QAS moieties that kill attached bacteria. Upon a reduction of the temperature below the LCST, swollen PNIPAAm chains promote the release of dead bacteria. These results demonstrate that nanopatterned PNIPAAm/QAS hybrid surfaces are model systems that exhibit an ability to undergo noncovalent, dynamic, and reversible changes in structure that can be used to control the attachment, killing, and release of bacteria in response to changes in temperature.
Collapse
|
117
|
Yu Y, Lu Y, Zhao X, Li X, Yin Z. Intestinal absorption of raltitrexed and evaluation of the effects of absorption enhancers. DIE PHARMAZIE 2013; 68:732-743. [PMID: 24147341] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Subscribe] [Scholar Register] [Indexed: 06/02/2023]
Abstract
Raltitrexed (RTX) has shown clinical activity in a variety of advanced solid tumours. Its oral bioavailability is low and its intestinal absorption mechanism is not clear. In the present study, the absorption mechanism of RTX in the small intestine was investigated, and the effects of absorption enhancers and efflux transporter inhibitors were evaluated by in vitro transport studies using the Caco-2 cell model and in situ perfusion experiments in rats. Oral bioavailability of RTX in rats in the presence or absence of enhancers were also investigated. The results of in vitro and in situ experiments indicated that the kinetic model of combined mechanism (active and passive transport) fitted the concentration-time data of RTX best with the highest R2 and lowest SSE (Sum of Squares for Error). The apparent or effective permeability coefficient (P(app) or P(eff)) of RTX remained statistically constant in a certain concentration range, then decreased when the concentration increased. But the decrease trend did not continue with further increase in concentration. And folic acid could competitively inhibit RTX absorption. These results suggested that a combined absorption mechanism for RTX existed. Furthermore, within certain concentration ranges, Carbomer 934P and sodium caprate (Cap-Na) exhibited significant absorption enhancement effects with low toxicity, whereas the enhancement effects of sodium deoxycholate (Deo-Na) were accompanied with acute toxicities. Moreover, probenecid and pantoprazole obviously enhanced RTX absorption, demonstrating that RTX is a substrate of the multidrug resistance protein (MRP) and breast cancer resistance protein (BCRP). A secretion experiment indicated that RTX could be effluxed into the intestines both with bile and by active efflux action. Oral bioavailability of RTX was significantly improved by the investigated absorption enhancers and transporter inhibitors, which is consistent with the in vitro and in situ experiments.
Collapse
|
118
|
Ricotti L, Fujie T, Vazão H, Ciofani G, Marotta R, Brescia R, Filippeschi C, Corradini I, Matteoli M, Mattoli V, Ferreira L, Menciassi A. Boron nitride nanotube-mediated stimulation of cell co-culture on micro-engineered hydrogels. PLoS One 2013; 8:e71707. [PMID: 23977119 PMCID: PMC3743765 DOI: 10.1371/journal.pone.0071707] [Citation(s) in RCA: 41] [Impact Index Per Article: 3.7] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/01/2013] [Accepted: 07/02/2013] [Indexed: 11/18/2022] Open
Abstract
In this paper, we describe the effects of the combination of topographical, mechanical, chemical and intracellular electrical stimuli on a co-culture of fibroblasts and skeletal muscle cells. The co-culture was anisotropically grown onto an engineered micro-grooved (10 µm-wide grooves) polyacrylamide substrate, showing a precisely tuned Young’s modulus (∼ 14 kPa) and a small thickness (∼ 12 µm). We enhanced the co-culture properties through intracellular stimulation produced by piezoelectric nanostructures (i.e., boron nitride nanotubes) activated by ultrasounds, thus exploiting the ability of boron nitride nanotubes to convert outer mechanical waves (such as ultrasounds) in intracellular electrical stimuli, by exploiting the direct piezoelectric effect. We demonstrated that nanotubes were internalized by muscle cells and localized in both early and late endosomes, while they were not internalized by the underneath fibroblast layer. Muscle cell differentiation benefited from the synergic combination of topographical, mechanical, chemical and nanoparticle-based stimuli, showing good myotube development and alignment towards a preferential direction, as well as high expression of genes encoding key proteins for muscle contraction (i.e., actin and myosin). We also clarified the possible role of fibroblasts in this process, highlighting their response to the above mentioned physical stimuli in terms of gene expression and cytokine production. Finally, calcium imaging-based experiments demonstrated a higher functionality of the stimulated co-cultures.
Collapse
|
119
|
Song J, Fang Z, Wang C, Zhou J, Duan B, Pu L, Duan H. Photolabile plasmonic vesicles assembled from amphiphilic gold nanoparticles for remote-controlled traceable drug delivery. NANOSCALE 2013; 5:5816-5824. [PMID: 23689945 DOI: 10.1039/c3nr01350b] [Citation(s) in RCA: 54] [Impact Index Per Article: 4.9] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/02/2023]
Abstract
We have developed a new type of photo-responsive plasmonic vesicles that allow for active delivery of anticancer payloads to specific cancer cells and personalized drug release regulated by external photo-irradiation. Our results show that amphiphilic gold nanoparticles carrying hydrophilic poly(ethylene glycol) (PEG) and photo-responsive hydrophobic poly(2-nitrobenzyl acrylate) (PNBA) can assemble into plasmonic vesicles with gold nanoparticles embedded in the hydrophobic shell of PNBA, which can be converted into hydrophilic poly(acrylic acid) upon photo exposure. Benefiting from the interparticle plasmonic coupling of gold nanoparticles in close proximity, the plasmonic vesicles assembled from amphiphilic gold nanoparticles exhibit distinctively different optical properties from single nanoparticle units, which offer the opportunity to track the photo-triggered disassembly of the vesicles and the associated cargo release by plasmonic imaging. We have shown the dense layer of PEG grafts on the vesicles not only endow plasmonic vesicles with excellent colloidal stability, but also serve as flexible spacers for bioconjugation of targeting ligands to facilitate the specific recognition of cancer cells. The targeted delivery of model anticancer drug doxorubicin, investigated by dual-modality plasmonic and fluorescence imaging and toxicity studies, clearly demonstrated the potential of photolabile plasmonic vesicles as multi-functional drug carriers.
Collapse
|
120
|
Kim Y, Kreke T, Hendrickson R, Parenti J, Ladisch MR. Fractionation of cellulase and fermentation inhibitors from steam pretreated mixed hardwood. BIORESOURCE TECHNOLOGY 2013. [PMID: 23186672 DOI: 10.1016/j.biortech.2012.10.130] [Citation(s) in RCA: 43] [Impact Index Per Article: 3.9] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/09/2023]
Abstract
The purpose of liquid hot water and steam pretreatment of wood is to fractionate hemicelluloses, partially solubilize lignin, and enhance enzyme hydrolysis of cellulose. The pretreatment also solubilizes sugar oligomers, lignin-derived phenolic compounds, acetic acid, and furan derivatives that inhibit cellulase enzymes and/or impede fermentation of hydrolysates by yeasts. This work extends knowledge of the relative contribution of identified inhibitors, and the effect of temperature on their release when pretreated materials are washed and filtered with hot water. Dramatic yield improvements occur when polymeric or activated carbon adsorbs and removes inhibitors. By desorbing, recovering, and characterizing adsorbed molecules we found phenolic compounds were strong inhibitors of enzyme hydrolysis and fermentation of concentrated filtrates by Saccharomyces cerevisiae wine yeast NRRL Y-1536 or xylose fermenting yeast 424A (LNH-ST). These data show that separation of inhibitors from pretreatment liquid will be important in achieving maximal enzyme activity and efficient fermentations.
Collapse
|
121
|
Li L, Liu C, Zhang L, Wang T, Yu H, Wang C, Su Z. Multifunctional magnetic-fluorescent eccentric-(concentric-Fe₃O₄@SiO₂@polyacrylic acid core-shell nanocomposites for cell imaging and pH-responsive drug delivery. NANOSCALE 2013; 5:2249-2253. [PMID: 23396548 DOI: 10.1039/c3nr33695f] [Citation(s) in RCA: 39] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/01/2023]
Abstract
Multifunctional fluorescent-magnetic pH-responsive eccentric-(concentric-Fe3O4@SiO2)@polyacrylic acid core-double shell nanocomposites (NCs) have been prepared for simultaneous cell imaging and pH-responsive drug delivery. To confirm the universality of the synthetic concept, the synthetic strategy was also extended to fabricate monodisperse eccentric-(concentric-NaYF4:Yb/Er/Gd@SiO2)@polyacrylic acid core-double shell NCs.
Collapse
|
122
|
Zhao C, Li X, Li L, Cheng G, Gong X, Zheng J. Dual functionality of antimicrobial and antifouling of poly(N-hydroxyethylacrylamide)/salicylate hydrogels. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2013; 29:1517-1524. [PMID: 23317290 DOI: 10.1021/la304511s] [Citation(s) in RCA: 72] [Impact Index Per Article: 6.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/01/2023]
Abstract
The emergence and reemergence of microbial infection demand an urgent response to develop effective biomaterials that prevent biofilm formation and associated bacterial infection. In this work, we have synthesized and characterized hybrid poly(N-hydroxyethylacrylamide) (polyHEAA)/salicylate (SA) hydrogels with integrated antifouling and antimicrobial capacities. The antifouling efficacy of polyHEAA hydrogels was examined via exposure to proteins, cells, and bacteria, while the antimicrobial activity of SA-treated polyHEAA hydrogels was investigated against both gram-negative Escherichia coli RP437 and gram-positive Staphylococcus epidermidis. The results showed that polyHEAA/SA hydrogels exhibited high surface resistance to protein adsorption, cell adhesion, and bacteria attachment. The polyHEAA hydrogels were also characterized by their water content and state of water, revealing a strong ability to contain and retain high nonfreezable water content. This work demonstrates that the hybrid polyHEAA/SA hydrogels can be engineered to possess both antifouling and antimicrobial properties, which can be used for different in vitro and in vivo applications against bacterial infection.
Collapse
|
123
|
Vallés-Lluch A, Arnal-Pastor M, Martínez-Ramos C, Vilariéño-Feltrer G, Vikingsson L, Monleón Pradas M. Grid polymeric scaffolds with polypeptide gel filling as patches for infarcted tissue regeneration. ANNUAL INTERNATIONAL CONFERENCE OF THE IEEE ENGINEERING IN MEDICINE AND BIOLOGY SOCIETY. IEEE ENGINEERING IN MEDICINE AND BIOLOGY SOCIETY. ANNUAL INTERNATIONAL CONFERENCE 2013; 2013:6961-6964. [PMID: 24111346 DOI: 10.1109/embc.2013.6611159] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/02/2023]
Abstract
Scaffolds of poly(ethyl acrylate) (PEA) with interconnected cylindrical orthogonal pores filled with a self-assembling peptide (SAP) gel are here proposed as patches for infarcted tissue regeneration. These combined systems aim to support cell therapy and meet further requirements posed by the application: the three-dimensional architecture of the elastomeric scaffold is expected to lodge the cells of interest in the damaged zone avoiding their death or migration, and at the same time conduct cell behavior and give mechanical support if necessary; the ECM-like polypeptide gel provides a cell-friendly aqueous microenvironment, facilitates diffusion of nutrients and cell wastes and is expected to improve the distribution and viability of the seeded cells within the pores and stimulate angiogenesis.
Collapse
|
124
|
Halperin A, Kröger M. Thermoresponsive cell culture substrates based on PNIPAM brushes functionalized with adhesion peptides: theoretical considerations of mechanism and design. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2012; 28:16623-16637. [PMID: 23121235 DOI: 10.1021/la303443t] [Citation(s) in RCA: 18] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/01/2023]
Abstract
Thermoresponsive tissue culture substrates based on PNIPAM brushes are used to harvest confluent cell sheets for tissue engineering. The prospect of clinical use imposes the utilization of culture medium free of bovine serum, thus suggesting conjugation with adhesion peptides containing the RGD minimal recognition sequence. The optimum position of the RGD along the chain should ensure both cell adhesion at 37 °C and cell detachment at T(L) below the lower critical solution temperature of PNIPAM. Design guidelines are formulated from considerations of brush confinement by the cells: (i) Cell adhesion at 37 °C is controlled by the RGDs accessible without brush compression. (ii) Cell detachment at T(L) is driven by a disjoining force due to confinement of the swollen brush by cells retaining integrin-RGD bonds formed at 37 °C. These suggest placing the RGDs at the grafting surface or its vicinity. Randomly placed RGDs do not enable efficient detachment because a large fraction of the integrin-RGD bonds are not sufficiently tensioned at T(L), in line with experimental observations (Ebara, M.; Yamato, M.; Aoyagi, T.; Kikuchi, A.; Sakai, K.; Okano, T. Immobilization of celladhesive peptides to temperature-responsive surfaces facilitates both serum-free cell adhesion and noninvasive cell harvest. Tissue Eng. 2004, 10, 1125-1135). The theory framework enables analysis of culture media based on polymer brushes conjugated with adhesion peptides in general.
Collapse
|
125
|
Titova LV, Brovko IS, Leonova NO, Votselko SK, Iutinskaia GA, Patyka VF. [Role of biocompatible adhesives in the increase of rhizobia physiological activity and productivity of soybean-rhizobia symbiosis]. MIKROBIOLOHICHNYI ZHURNAL (KIEV, UKRAINE : 1993) 2012; 74:9-16. [PMID: 23293821] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Subscribe] [Scholar Register] [Indexed: 06/01/2023]
Abstract
On the basis of natural exopolysaccharide xanthan and exopolyacrylamide the sticky-gene composition has been developed. Addition of that composition to the culture medium provided a 26.3 times higher viability of Bradyrhizobium japonicum UCM B-6035 cells during its storage. Introduction of plant growth regulators biosil or ivin into this composition increased the survival of rhizobia. Application of gel inoculant B. japonicum favored more intensive growth of rhizosphere microorganisms, nutrient's accumulation in the soil and increased productivity of soybean-Rhizobium symbiosis.
Collapse
|