Microcapsules with intrinsic barium radiopacity for immunoprotection and X-ray/CT imaging of pancreatic islet cells

Microencapsulation is a commonly used technique for immunoprotection of engrafted therapeutic cells. We investigated a library of capsule formulations to determine the most optimal formulation for pancreatic beta islet cell transplantation, using barium as the gelating ion and clinical-grade protamine sulfate (PS) as a new cationic capsule cross-linker. Barium-gelated alginate/PS/alginate microcapsules (APSA, diameter = 444 ± 21 μm) proved to be mechanically stronger and supported a higher cell viability as compared to conventional alginate/poly-l-lysine/alginate (APLLA) capsules. Human pancreatic islets encapsulated inside APSA capsules, gelated with 20 mm barium as optimal concentration, exhibited a sustained morphological integrity, viability, and functionality for at least 3-4 weeks in vitro, with secreted human C-peptide levels of 0.2-160 pg/ml/islet. Unlike APLLA capsules that are gelled with calcium, barium-APSA capsules are intrinsically radiopaque and, when engrafted into mice, could be readily imaged in vivo with micro-computed tomography (CT). Without the need of adding contrast agents, these capsules offer a clinically applicable alternative for simultaneous immunoprotection and real-time, non-invasive X-ray/CT monitoring of engrafted cells during and after in vivo administration.

Structure of iron phosphate glasses modified by alkali and alkaline earth additions: neutron and x-ray diffraction studies

The structure of iron phosphate glasses modified by additions of K(2)O and BaO, with nominal molar compositions [(1 - x)(0.6P(2)O(5)-0.4Fe(2)O(3))]xMe(y)O, where x = 0-0.4 in increments of 0.1; Me=K or Ba; and y = 1 or 2, has been investigated using neutron diffraction and x-ray diffraction techniques. Fitted coordination numbers for P-O and Fe-O showed a notable change in the P-O(NBO) and P-O(BO) contributions at greater than 20 mol% modifier addition, with barium producing a markedly larger increase in P-O(NBO) contribution than potassium. Fitting of T(N)(r) and T(X)(r) provided average n(BaO) = 9 and n(KO) = 6. Iron occurs in a range of coordination sites in these glasses: ([6])Fe(2+), ([4])Fe(3+), ([5])Fe(3+) and ([6])Fe(3+). The partitioning between these sites gives average n(FeO) = 5.2-5.8, with barium-doped glasses exhibiting higher average n(FeO) than potassium-doped glasses. The stronger depolymerizing effect of Ba(2+) than K(+) on the phosphate network, coupled with its greater ionic charge and higher Me-O, Fe-O and O···O coordination numbers, explain previously observed divergences in physical properties between the barium-doped and the potassium-doped glasses.

Enhancement of ferroelectric polarization stability by interface engineering

By using theoretical predictions based on first-principle calculations, we explore an interface engineering approach to stabilize polarization states in ferroelectric heterostructures with a thickness of just several nanometers.

Enhanced 355-nm generation using a simple method to compensate for walk-off loss

We theoretically and experimentally investigated a novel walk-off-compensation method for efficient ultraviolet beam generation. Through theoretical investigation, we described in detail how the power of a generated UV beam can be enhanced by the method; thus, we obtained a brief expression for the output power which has a prediction error of about 30%. In addition, we found that the beam quality can also be enhanced using this method. Through experiments using an alpha barium borate crystal as a walk-off compensator, we found that the power of the generated ultraviolet beam increased 1.9 times.

Towards the next generation of solid oxide fuel cells operating below 600 °c with chemically stable proton-conducting electrolytes

The need for reducing the solid oxide fuel cell (SOFC) operating temperature below 600 °C is imposed by cost reduction, which is essential for widespread SOFC use, but might also disclose new applications. To this aim, high-temperature proton-conducting (HTPC) oxides have gained widespread interest as electrolyte materials alternative to oxygen-ion conductors. This Progress Report describes recent developments in electrolyte, anode, and cathode materials for protonic SOFCs, addressing the issue of chemical stability, processability, and good power performance below 600 °C. Different fabrication methods are reported for anode-supported SOFCs, obtained using state-of-the-art, chemically stable proton-conducting electrolyte films. Recent findings show significant improvements in the power density output of cells based on doped barium zirconate electrolytes, pointing out towards the feasibility of the next generation of protonic SOFCs, including a good potential for the development of miniaturized SOFCs as portable power supplies.

Influence of burning of fireworks on particle size distribution of PM10 and associated barium at Nagpur

Influence of burning of fireworks on particle size distribution of PM(10) and associated barium (Ba) were studied at a congested residential cum commercial area of Nagpur city, India. Sampling was carried out by cascade impactor having 50% cut-off aerodynamic diameters of <10, 9, 5.8, 4.7, 3.3, 2.1, 1.1, 0.7, and <0.4 μm, 2 days before diwali, during diwali, celebrations of marriage functions, and New Year's Eve. Noticeably, increased levels of PM(10) and Ba were observed during diwali as compared to days before diwali and other activities. PM(10) levels were increased by four to nine times whereas Ba levels were increased by eight to 20 times higher in alveolar region, when compared with the levels observed before diwali. Probability of deposition of Ba mass in alveolar region varied between 14 and 27 ng/h with higher deposition when the burning of fireworks activity was lower near the site. Trimodal distribution of Ba was observed on the first 2 days of diwali at 0.4-2.1, 2.1-4.7, and 4.7 to less than PM(10) micrometer range. While on the third day, it appeared bimodal with 70% contribution in coarse fraction whereas on the fourth day, distribution appeared unimodal with 66% contribution in alveolar region (<0.4-1.1 μm). Distribution of Ba varied with respect to particle size, in accordance with the intensity of the fireworks used on different days and distance between the burning of firecrackers from the monitoring site.

Regeneration of barium carbonate from barium sulphide in a pilot-scale bubbling column reactor and utilization for acid mine drainage

Batch regeneration of barium carbonate (BaCO(3)) from barium sulphide (BaS) slurries by passing CO(2) gas into a pilot-scale bubbling column reactor under ambient conditions was used to assess the technical feasibility of BaCO(3) recovery in the Alkali Barium Calcium (ABC) desalination process and its use for sulphate removal from high sulphate Acid Mine Drainage (AMD). The effect of key process parameters, such as BaS slurry concentration and CO(2) flow rate on the carbonation, as well as the extent of sulphate removal from AMD using the recovered BaCO(3) were investigated. It was observed that the carbonation reaction rate for BaCO(3) regeneration in a bubbling column reactor significantly increased with increase in carbon dioxide (CO(2)) flow rate whereas the BaS slurry content within the range 5-10% slurry content did not significantly affect the carbonation rate. The CO(2) flow rate also had an impact on the BaCO(3) morphology. The BaCO(3) recovered from the pilot-scale bubbling column reactor demonstrated effective sulphate removal ability during AMD treatment compared with commercial BaCO(3).

Barium as a potential indicator of phosphorus in agricultural runoff

In many catchments, anthropogenic input of contaminants, and in particular phosphorus (P), into surface water is a mixture of agricultural and sewage runoff. Knowledge about the relative contribution from each of these sources is vital for mitigation of major environmental problems such as eutrophication. In this study, we investigated whether the distribution of trace elements in surface waters can be used to trace the contamination source. Water from three groups of streams was investigated: streams influenced only by agricultural runoff, streams influenced mainly by sewage runoff, and reference streams. Samples were collected at different flow regimes and times of year and analyzed for 62 elements using ICP-MS. Our results show that there are significant differences between the anthropogenic sources affecting the streams in terms of total element composition and individual elements, indicating that the method has the potential to trace anthropogenic impact on surface waters. The elements that show significant differences between sources are strontium (p < 0.001), calcium (p < 0.004), potassium (p < 0.001), magnesium (p < 0.001), boron (p < 0.001), rhodium (p = 0.001), and barium (p < 0.001). According to this study, barium shows the greatest potential as a tracer for an individual source of anthropogenic input to surface waters. We observed a strong relationship between barium and total P in the investigated samples (R(2) = 0.78), which could potentially be used to apportion anthropogenic sources of P and thereby facilitate targeting of mitigation practices.

SAD phasing with in-house cu Ka radiation using barium as anomalous scatterer

Phasing of lysozyme crystals using co-crystallized barium ions was performed using single-wavelength anomalous diffraction (SAD) method using Cu Ka radiation with in-house source of data collection. As the ion binding sites vary with respect to the pH of the buffer during crystallization, the highly isomorphic forms of lysozyme crystals grown at acidic and alkaline pH were used for the study. Intrinsic sulphur anomalous signal was also utilized with anomalous signal from lower occupancy ions for phasing. The study showed that to solve the structure by SAD technique, 2.8-fold data redundancy was sufficient when barium was used as an anomalous marker in the in-house copper X-ray radiation source for data collection. Therefore, co-crystallization of proteins with barium containing salt can be a powerful tool for structure determination using lab source.

Luminescent properties of Tb3+ and Gd3+ ions doped aluminosilicate oxyfluoride glasses

Tb(3+) and Gd(3+) ions doped lithium-barium-aluminosilicate oxyfluoride glasses have been prepared. The transmission, emission and excitation spectra were measured. It has been found that those Tb(3+)-doped lithium-barium-aluminosilicate oxyfluoride glasses exhibit good UV-excited luminescence. The luminescence intensity of Tb(3+) ion increases for those (Tb(3+), Gd(3+))-codoped glasses. Energy transfer process from Gd(3+) ion to Tb(3+) ion is indicated.

Synthesis, complexation, and fluorescence behavior of 3,4-dimethylthieno[2,3-b]thiophene carrying two monoaza-15-crown-5 ether groups

A novel fluoroionophore 1 based on 3,4-dimethylthieno[2,3-b]thiophene bearing two monoaza-15-crown-5 ethers at 3- and 4-positions was prepared. UV-vis and fluorescence responses of compound 1 upon the addition of alkali and alkaline earth metal cations were evaluated in acetonitrile solution. Receptor 1 showed unique response for Ba(2+) due to the formation of an intramolecular sandwich complex.

Influence of alkaline earth metals on molecular structure of 3-nitrobenzoic acid in comparison with alkali metals effect

The influence of beryllium, magnesium, calcium, strontium and barium cations on the electronic system of 3-nitrobenzoic acid was studied in comparison with studied earlier alkali metal ions. The vibrational FT-IR (in KBr and ATR techniques) and (1)H and (13)C NMR spectra were recorded for 3-nitrobenzoic acid and its salts. Characteristic shifts in IR and NMR spectra along 3-nitrobenzoates of divalent metal series Mg→Ba were compared with series of univalent metal Li→Cs salts. Good correlations between the wavenumbers of the vibrational bands in the IR spectra for 3-nitrobenzoates and ionic potential, electronegativity, inverse of atomic mass, atomic radius and ionization energy of metals were found for alkaline earth metals as well as for alkali metals. The density functional (DFT) hybrid method B3LYP with two basis sets: 6-311++G** and LANL2DZ were used to calculate optimized geometrical structures of studied compounds. The theoretical wavenumbers and intensities of IR spectra as well as chemical shifts in NMR spectra were obtained. Geometric aromaticity indices, atomic charges, dipole moments and energies were also calculated. The calculated parameters were compared to experimental characteristic of studied compounds.

Terahertz dielectric response of ferroelectric Ba(x)Sr(1-x)TiO3 thin films

Terahertz time-domain spectroscopy has been used to investigate the dielectric and optical properties of ferroelectric Ba(x)Sr(1-x)TiO(3) thin films for nominal x-values of 0.4, 0.6, and 0.8 in the frequency range of 0.3 to 2.5 THz. The ferroelectric thin films were deposited at approximately 700 nm thickness on [001] MgO substrate by pulsed laser deposition. The measured complex dielectric and optical constants were compared with the Cole-Cole relaxation model. The results show that the Cole-Cole relaxation model fits well with the data throughout the frequency range and the dielectric relaxation behavior of ferroelectric Ba(x)Sr(1-x)TiO(3) thin films varies with the films compositions. Among the compositions of Ba(x)Sr(1-x)TiO(3) films with different Ba/Sr ratios, Ba(0.6)Sr(0.4)TiO(3) has the highest dielectric constants and the shortest dielectric relaxation time.

Dielectric properties of lead-free BZT-KNN perovskite ceramics for energy storage

Lead-free (1-x)Ba(Zr₀.₁₅Ti₀.₈₅)O₃-x(K₀.₅Na₀.₅)NbO₃ ; x=0-0.05) (BZT-KNN) perovskite ceramics, a materials with potential applications for energy storage, are investigated. The samples are prepared by a solid-state reaction method. Powder X-ray diffraction (XRD) and scanning electron microscopy (SEM) are used to study the microstructure of the samples. Their dielectric properties and impedance spectra are reported as functions of temperature and frequency. The addition of 1 mol % (K₀.₅Na₀.₅)NbO₃ to Ba(Zr₀.₁₅Ti₀.₈₅)O₃ improves the dielectric constant and enhances its diffuseness in a wide temperature range. The small amount of (K₀.₅Na₀.₅)NbO₃ is found to markedly affect the microstructure of the Ba(Zr₀.₁₅Ti₀.₈₅)O₃ ceramic (grain size and other characteristics) without changing the phase or crystal symmetry. In addition, we report that fine substructures in the grains, so-called sheet structures, are responsible for the dielectric properties (both diffuseness and dielectric constant) of (1-x)Ba(Zr₀.₁₅Ti₀.₈₅)O₃-x(K₀.₅Na₀.₅)NbO₃ (x=0-0.03; especially x=0.01) ceramics.

Superlattice of rodlike virus particles formed in aqueous solution through like-charge attraction

Rodlike tobacco mosaic virus (TMV) has been found to assemble into a 2D superlattice in aqueous solution with hexagonally packed structures in the presence of Ba(2+) through like-charge attraction whereas lower-Z divalent ions such as Zn(2+), Cd(2+), Mg(2+), and Ca(2+) induce only liquidlike ordering. The molar ratio between Ba(2+) and TMV is a crucial parameter in the formation of the superlattice. There is a critical molar ratio of Ba(2+) to TMV at which TMV exhibits a transition from a nonordered colloidal state to an ordered crystalline state. It is also found that the superlattice is formed regardless of the pH and TMV concentration within the range studied.

Effect of preservation on the δ¹³C value of dissolved inorganic carbon in different types of water samples

Recent studies have shown that the stable carbon isotope compositions of dissolved inorganic carbon (δ(13)C(DIC)) of water samples preserved with HgCl(2) and CuSO(4) vary. Furthermore, mercury and cuprum compounds are toxic to the human or biological system and require proper waste disposal. To test the effect of preservation on the δ(13)C value of DIC in different types of water samples, a set of water samples with different DIC concentrations was preserved using different methods, including preserving with inhibitors (CuSO(4) or HgCl(2)), preserving under frozen conditions, filtering through a 0.4 μ m paper filter, and the DIC species precipitated in the form of solid BaCO(3). Our results show that δ(13)C(DIC) values of the samples preserved with CuSO(4) and HgCl(2) become more positive with increased storage time. The δ(13)C(DIC) of the water samples preserved under frozen conditions and the precipitated DIC as BaCO(3) are also more positive than original water samples. However, the δ(13)C values were relatively stable for up to 90 days in all water samples filtered through the 0.4 μ m paper filter and stored under cool conditions (0-4 °C). Therefore, we suggest that the better method for the storage of water samples is to filter the samples through a 0.4 μ m paper filter while out in the field and preserve them under cool conditions, thereby avoiding the use of preservatives.

Simulation study on the trembling shear behavior of eletrorheological fluid

The trembling shear behavior of electrorheological (ER) fluids has been investigated by using a computer simulation method, and a shear-slide boundary model is proposed to understand this phenomenon. A thiourea-doped Ba-Ti-O ER fluid which shows a trembling shear behavior was first prepared and then systematically studied by both theoretical and experimental methods. The shear curves of ER fluids in the dynamic state were simulated with shear rates from 0.1 to 1000 s(-1) under different electric fields. The simulation results of the flow curves match the experimental results very well. The trembling shear curves are divided into four regions and each region can be explained by the proposed model.

Depth heterogeneity of fully aromatic polyamide active layers in reverse osmosis and nanofiltration membranes

We studied the depth heterogeneity of fully aromatic polyamide (PA) active layers in commercial reverse osmosis (RO) and nanofiltration (NF) membranes by quantifying near-surface (i.e., top 6 nm) and volume-averaged properties of the active layers using X-ray photoelectron spectrometry (XPS) and Rutherford backscattering spectrometry (RBS), respectively. Some membranes (e.g., ESPA3 RO) had active layers that were depth homogeneous with respect to the concentration and pK(a) distribution of carboxylic groups, degree of polymer cross-linking, concentration of barium ion probe that associated with ionized carboxylic groups, and steric effects experienced by barium ion. Other membranes (e.g., NF90 NF) had active layers that were depth heterogeneous with respect to the same properties. Our results therefore support the existence of both depth-homogeneous and depth-heterogeneous active layers. It remains to be assessed whether the depth heterogeneity consists of gradually changing properties throughout the active layer depth or of distinct sublayers with different properties.

Suppression of probe background signals via B(1) field inhomogeneity

A new approach combining a long pulse with the DEPTH sequence (Cory and Ritchey, Journal of Magnetic Resonance, 1988) greatly improves the efficiency for suppressing probe background signals arising from spinning modules. By applying a long initial excitation pulse in the DEPTH sequence, instead of a π/2 pulse, the inhomogeneous B(1) fields outside the coil can dephase the background coherence in the nutation frame. The initial long pulse and the following two consecutive EXORCYCLE π pulses function complementarily and prove most effective in removing background signals from both strong and weak B₁ fields. Experimentally, the length of the long pulse can be optimized around odd multiples of the π/2 pulse, depending on the individual probe design, to preserve signals inside the coil while minimizing those from probe hardware. This method extends the applicability of the DEPTH sequence to probes with small differences in B₁ field strength between the inside and outside of the coil, and can readily combine with well-developed double resonance experiments for quantitative measurement. In general, spin systems with weak internal interactions are required to attain efficient and uniform excitation for powder samples, and the principles to determine the applicability are discussed qualitatively in terms of the relative strength of spin interactions, r.f. power and spinning rate.

IAEA regional intercomparison of in vivo measurements of 131I in the thyroid: the Latin American and Caribbean experience

An in vivo intercomparison exercise, organised in the scope of the IAEA Regional Latin American (RLA) Project 9066, was carried out in 2009 aimed to harmonise measurement procedures on the measurement of (131)I in the thyroid among Latin American and Caribbean countries. The exercise consisted in the measurement of an anthropomorphic thyroid phantom spiked with a certified source of (133)Ba. The phantom was supplied by the In Vivo Monitoring Laboratory of Institute for Radiation Protection and Dosimetry (IRD) to 17 Institutions from 12 countries of the regions. Among these, 13 Institutions from 10 countries returned their measurement results as well as a standard report form containing detailed information about their respective counting facilities. All participants reported activities within an acceptable range, considering American National Standard Institute (ANSI) limits. Uncertainties varied from 0.04 to 12.9 %. Although results show that the general performance was acceptable in terms of accuracy, the need for additional action towards the standardisation of uncertainty estimation in this type of measurement in the region should be highlighted.

Fluorescence and phosphorescence properties of new long-lasting phosphor Ba4(Si3O8)2:Eu2+, Dy3+

A novel long-lasting phosphorescence (LLP) material Ba4(Si3O8)2:Eu2+, Dy3+ with high chemical stability was achieved successfully. Two emission centers (Eu (I) and Eu (II)) were found in Ba4(Si3O8)2 due to the substitution of Eu2+ in different Ba2+ sites. Both 
Eu (I) and Eu (II) had contribution to the afterglow process, however, the decay rate of Eu (I) was higher than that of Eu (II). Ba3.982(Si3O8)2: 0.008Eu2+, 0.01Dy3+ exhibited a long-lasting phosphorescence whose duration was more than 24 h. Through the analysis of the thermoluminescence (TL) curves, we found that Eu2+ single doped Ba4(Si3O8)2 has a possibility to be a kind of storage phosphor. This work provides a new and efficient candidate for LLP and storage materials.

Water splitting over new niobate photocatalysts with tungsten-bronze-type structure and effect of transition metal-doping

Photophysical properties and photocatalytic activities for water splitting over KM(2)Nb(5)O(15) (M = Sr and Ba) and K(2)LnNb(5)O(15) (Ln = La, Pr, Nd, and Sm) with tungsten bronze-type structure were investigated. Single phases of KM(2)Nb(5)O(15) and K(2)LnNb(5)O(15) were successfully prepared by solid-state reaction (SSR) method and polymerizable complex (PC) method. The band gaps of these niobates were estimated to be 3.1-3.5 eV. These metal oxides loaded with an activated NiO(x) cocatalyst showed photocatalytic activities for water splitting into H(2) and O(2) under UV irradiation. When K(2)LaNb(5)O(15) was doped by Rh ions, a new visible-light absorption band was observed around 400-500 nm in addition to the band gap absorption band of the K(2)LaNb(5)O(15) host. K(2)LaNb(5)O(15):Rh showed photocatalytic activities for H(2) or O(2) evolution from an aqueous solution containing a sacrificial reagent under visible-light irradiation.

Local measurement of the superfluid density in the pnictide superconductor Ba(Fe(1-x)Co(x))(2)As(2) across the superconducting dome

We measure the penetration depth λab(T) in Ba(Fe(1-x)Co(x))(2)As(2) using local techniques that do not average over the sample. The superfluid density ρs(T) ≡ 1/λab(T)2 has three main features. First, ρs (T = 0) falls sharply on the underdoped side of the dome. Second, λab(T) is flat at low T at optimal doping, indicating fully gapped superconductivity, but varies more strongly in underdoped and overdoped samples, consistent with either a power law or a small second gap. Third, ρs (T) varies steeply near Tc for optimal and underdoping. These observations are consistent with an interplay between magnetic and superconducting phases.

Behavior of inorganic elements during sludge ozonation and their effects on sludge solubilization

The behavior of inorganic elements (including phosphorus, nitrogen, and metals) during sludge ozonation was investigated using batch tests and the effects of metals on sludge solubilization were elucidated. A decrease of ∼ 50% in the ratio of sludge solubilization was found to relate to a high iron content 80-120 mgFe/gSS than that of 4.7-7.4 mgFe/gSS. During sludge ozonation, the pH decreased from 7 to 5, which resulted in the dissolution of chemically precipitated metals and phosphorus. Based on experimental results and thermodynamic calculation, phosphate precipitated by iron and aluminum was more difficult to release while that by calcium released with decrease in pH. The release of barium, manganese, and chrome did not exceed 10% and was much lower than COD solubilization; however, that of nickel, copper, and zinc was similar to COD solubilization. The ratio of nitrogen solubilization was 1.2 times higher than that of COD solubilization (R(2)=0.85). Of the total nitrogen solubilized, 80% was organic nitrogen. Because of their high accumulation potential and negative effect on sludge solubilization, high levels of iron and aluminum in both sewage and sludge should be considered carefully for the application of the advanced sewage treatment process with sludge ozonation and phosphorus crystallization.

Characterization of lead, barium and strontium leachability from foam glasses elaborated using waste cathode ray-tube glasses

Foam glass manufacture is a promising mode for re-using cathode ray tube (CRT) glasses. Nevertheless, because CRTs employ glasses containing heavy metals such as lead, barium and strontium, the leaching behaviour of foam glasses fabricated from CRTs must be understood. Using the AFNOR X 31-210 leaching assessment procedure, the degree of element inertization in foam glasses synthesized from waste CRT glasses (funnel and panel glasses, containing lead and barium/strontium respectively) were determined. The amount of leached lead from foam glasses prepared from funnel glass depends on the nature and concentration of the reducing agent. The effects of the reducing agents on the generation of cellular structure in the fabrication of foam glass were studied. The fraction of lead released from foam glass was less than those extracted from funnel glass and was lower than the statutory limit. Leached concentrations of barium and strontium were found to be approximately constant in various tests and were also below regulatory limits.