Toluene biodegradation by Pseudomonas putida F1: targeting culture stability in long-term operation

The stability of Pseudomonas putida F1, a strain harbouring the genes responsible for toluene degradation in the chromosome was evaluated in a bioscrubber under high toluene loadings and nitrogen limiting conditions at two dilution rates (0.11 and 0.27 h(-1)). Each experiment was run for 30 days, period long enough for microbial instability to occur considering previously reported studies carried out with bacterial strains encoding the catabolic genes in the TOL plasmid. At all tested conditions, P. putida F1 exhibited stable performance as shown by the constant values of the specific toluene degradation yield, CO2 produced versus toluene degraded yield, and biomass concentration within each steady state. Benzyl alcohol, a curing agent causing TOL plasmid deletion in Pseudomonas strains, was present in the cultivation medium as a result of the monooxygenation of toluene by the diooxygenase system of P. putida F1. However, no mutant population growing at the expense of the extracellular excreted carbon or lysis products was established in the chemostat as confirmed by the constant dissolved total organic carbon (TOC) concentration and fraction of toluene degrading cells (approx. 100%). In addition, batch experiments conducted with both lysis substrate and toluene simultaneously confirmed that P. putida F1 preferentially consumed toluene rather than extracellular excreted carbon.

Conjugative transfer of preferential utilization of aromatic compounds from Pseudomonas putida CSV86

Pseudomonas putida CSV86 utilizes naphthalene (Nap), salicylate (Sal), benzyl alcohol (Balc), and methylnaphthalene (MN) preferentially over glucose. Methylnaphthalene is metabolized by ring-hydroxylation as well as side-chain hydroxylation pathway. Although the degradation property was found to be stable, the frequency of obtaining Nap(-)Sal(-)MN(-)Balc(-) phenotype increased to 11% in the presence of curing agents. This property was transferred by conjugation to Stenotrophomonas maltophilia CSV89 with a frequency of 7 x 10(-8) per donor cells. Transconjugants were Nap(+)Sal(+)MN(+)Balc(+) and metabolized MN by ring- as well as side-chain hydroxylation pathway. Transconjugants also showed the preferential utilization of aromatic compounds over glucose indicating transfer of the preferential degradation property. The transferred properties were lost completely when transconjugants were grown on glucose or 2YT. Attempts to detect and isolate plasmid DNA from CSV86 and transconjugants were unsuccessful. Transfer of degradation genes and its subsequent loss from the transconjugants was confirmed by PCR using primers specific for 1,2-dihydroxynaphthalene dioxygenase and catechol 2,3-dioxygenase (C23O) as well as by DNA-DNA hybridizations using total DNA as template and C23O PCR fragment as a probe. These results indicate the involvement of a probable conjugative element in the: (i) metabolism of aromatic compounds, (ii) ring- and side-chain hydroxylation pathways for MN, and (iii) preferential utilization of aromatics over glucose.

Time lapse confocal microscopy studies of bacterial adhesion to self-assembled monolayers and confirmation of a novel approach to the thermodynamic model

In this study, we use thermodynamic theory to develop a novel model that allows for the quantitative determination of the Gibbs free energy of adhesion for the initial bacterial attachment process. This model eliminates the need to calculate interfacial free energies and instead relies on easily measurable contact angles to determine DeltaG(adh). We experimentally verify our model using real-time observation of the initial attachment of Pseudomonas putida to methyl- and hydroxyl-terminated self-assembled monolayers. We also test the applicability of our model to a variety of experimental conditions using data available in the literature. We show that the initial attachment process is governed by dispersion forces and is accurately predicted by our model. Also, we find that our model is simple to apply and accurate for a variety of experimental conditions.

Convergent peripheral pathways catalyze initial glucose catabolism in Pseudomonas putida: genomic and flux analysis

In this study, we show that glucose catabolism in Pseudomonas putida occurs through the simultaneous operation of three pathways that converge at the level of 6-phosphogluconate, which is metabolized by the Edd and Eda Entner/Doudoroff enzymes to central metabolites. When glucose enters the periplasmic space through specific OprB porins, it can either be internalized into the cytoplasm or be oxidized to gluconate. Glucose is transported to the cytoplasm in a process mediated by an ABC uptake system encoded by open reading frames PP1015 to PP1018 and is then phosphorylated by glucokinase (encoded by the glk gene) and converted by glucose-6-phosphate dehydrogenase (encoded by the zwf genes) to 6-phosphogluconate. Gluconate in the periplasm can be transported into the cytoplasm and subsequently phosphorylated by gluconokinase to 6-phosphogluconate or oxidized to 2-ketogluconate, which is transported to the cytoplasm, and subsequently phosphorylated and reduced to 6-phosphogluconate. In the wild-type strain, glucose was consumed at a rate of around 6 mmol g(-1) h(-1), which allowed a growth rate of 0.58 h(-1) and a biomass yield of 0.44 g/g carbon used. Flux analysis of (13)C-labeled glucose revealed that, in the Krebs cycle, most of the oxalacetate fraction was produced by the pyruvate shunt rather than by the direct oxidation of malate by malate dehydrogenase. Enzymatic and microarray assays revealed that the enzymes, regulators, and transport systems of the three peripheral glucose pathways were induced in response to glucose in the outer medium. We generated a series of isogenic mutants in one or more of the steps of all three pathways and found that, although all three functioned simultaneously, the glucokinase pathway and the 2-ketogluconate loop were quantitatively more important than the direct phosphorylation of gluconate. In physical terms, glucose catabolism genes were organized in a series of clusters scattered along the chromosome. Within each of the clusters, genes encoding porins, transporters, enzymes, and regulators formed operons, suggesting that genes in each cluster coevolved. The glk gene encoding glucokinase was located in an operon with the edd gene, whereas the zwf-1 gene, encoding glucose-6-phosphate dehydrogenase, formed an operon with the eda gene. Therefore, the enzymes of the glucokinase pathway and those of the Entner-Doudoroff pathway are physically linked and induced simultaneously. It can therefore be concluded that the glucokinase pathway is a sine qua non condition for P. putida to grow with glucose.

Spatial distribution and physiological state of bacteria in a sand column experiment during the biodegradation of toluene

Toxic organic contaminants frequently serve as growth substrates for bacteria. However, long-term exposure to the organic contaminants can result in significant stress or "injury" to bacterial cells such that bacteria may lose, either temporarily or permanently, their capacity to degrade a specific toxic organic contaminant. In order to understand the relationship between biodegradability and physiological conditions of bacteria after a prolonged exposure to a contaminant, biomass samples collected from a sand column experiment, with toluene as the carbon source, were analyzed for bacterial physiology and spatial population distribution in the porous media. The column was seeded with three bacterial isolates that perform aerobic (Pseudomonas putida F1), denitrifying (Thauera aromatica T1), and facultative (Ralstonia pickettii PKO1) degradation of toluene were analyzed. Total, viable but not culturable with toluene, and toluene-culturable cells were enumerated using 4'6-diamidino-2-phenylindole (DAPI) staining and plate counting methods. Comparison of three types of cell counts showed that toluene-culturable cells were less than 40% of the total cell numbers. However, viable colonies transferred to a toluene media after cultivation on rich media regained their ability to degrade toluene. This implies that the temporary loss of their toluene degradation capacity is either due to an intracellular accumulation of degradation by-products, which have to be consumed in order for the cells to degrade toluene, or it is possible that cells have shifted to degrade other substrates such as toluene degradation intermediates or organic materials resulting from cell turnover. Comparison of cell counts with toluene concentration showed no exponential increase in total and viable cell numbers, as reported for flat bed biofilm reactor experiments. The overall fraction of toluene-culturable cells was highest at the highest toluene concentration near the column inlet, which indicates that the observed temporary loss of toluene culturability was not solely caused by a direct toxic effect from the long-term exposure to toluene.

The phosphotransferase system formed by PtsP, PtsO, and PtsN proteins controls production of polyhydroxyalkanoates in Pseudomonas putida

The genome of Pseudomonas putida KT2440 encodes five proteins of the phosphoenolpyruvate-carbohydrate phosphotransferase system. Two of these (FruA and FruB) form a dedicated system for fructose intake, while enzyme I(Ntr) (EI(Ntr); encoded by ptsP), NPr (ptsO), and EII(Ntr) (ptsN) act in concert to control the intracellular accumulation of polyhydroxyalkanoates, a typical product of carbon overflow.

Characterization of the last step of the aerobic phenylacetic acid degradation pathway

Phenylacetic acid (PA) degradation in bacteria involves an aerobic hybrid pathway encoded by the paa gene cluster. It is shown here that succinyl-CoA is one of the final products of this pathway in Pseudomonas putida and Escherichia coli. Moreover, in vivo and in vitro studies revealed that the paaE gene encodes the beta-ketoadipyl-CoA thiolase that catalyses the last step of the PA catabolic pathway, i.e. the thiolytic cleavage of beta-ketoadipyl-CoA to succinyl-CoA and acetyl-CoA. Succinyl-CoA is suggested as a common final product of aerobic hybrid pathways devoted to the catabolism of aromatic compounds.

Characterization of cultures enriched from acidic polycyclic aromatic hydrocarbon-contaminated soil for growth on pyrene at low pH

Two polycyclic aromatic hydrocarbon (PAH)-contaminated soils of pH 2 were successfully used as inoculum to enrich cultures growing on phenanthrene and pyrene at different pHs, including pH 3. Selected pyrene-utilizing cultures obtained at pH 3, pH 5, and pH 7 were further characterized. All showed rapid [14C]pyrene mineralization at pH 3 and pH 5 and grew on pyrene at pH values ranging from 2 to 6. Eubacterial and mycobacterial 16S rRNA gene denaturing gradient gel electrophoresis fingerprinting and sequencing indicated that the cultures were dominated by a single bacterium closely related to Mycobacterium montefiorense, belonging to the slow-growing Mycobacterium sp. In contrast, a culture enriched on pyrene at pH 7 from a slightly alkaline soil sampled at the same site was dominated by Pseudomonas putida and a fast-growing Mycobacterium sp. The M. montefiorense-related species dominating the pyrene-utilizing cultures enriched from the acidic soils was also the dominant Mycobacterium species in the acidic soils. Our data indicate that a slow-growing Mycobacterium species is involved in PAH degradation in that culture and show that bacteria able to degrade high-molecular-weight PAHs at low pH are present in acidic PAH-contaminated soil.

Reduction of 2,4-dichlorophenol toxicity to Pseudomonas putida after oxidative incubation with humic substances and a biomimetic catalyst

The effect of a synthetic iron(III)-porphyrin meso-tetra(2,6-dichloro-3-sulfonatophenyl)porphyrinate as a biomimetic catalyst in the oxidative treatment of 2,4-dichlorophenol (2,4-DCP) with humic substances and H(2)O(2) was evaluated in factorial design experiments conducted at different concentrations of 2,4-DCP (0-25 ppm) and different incubation treatment times (0, 24, 96, or 120 h). In the absence of this treatment, bioassays with the bacterium Pseudomonas putida (ATCC11250) showed decreasing specific growth rates mu (used here to quantify 2,4-DCP toxicity) with increasing concentrations of 2,4-DCP. However, when 2,4-DCP was treated as mentioned above the toxicity of the resulting 2,4-DCP solution was reduced significantly. At low 2,4-DCP concentrations (up to 5 ppm) and long incubation periods (as long as 120 h), the specific growth rate mu was comparable to that of cultures grown in the absence of 2,4-DCP. The reduction in toxicity was directly correlated to a decrease in the concentration of 2,4-DCP in the treated solutions, as measured by high-performance liquid chromatography. The reduced concentrations of 2,4-DCP in the treated solutions could be correctly predicted based on the relationship between the specific growth rates and the 2,4-DCP concentrations in untreated solutions. These results indicate that the oxidative coupling of 2,4-DCP to humic substances catalyzed by the synthetic iron(III)-porphyrin catalyst in the presence of H(2)O(2) is responsible for the removal of 2,4-DCP from solutions. This approach appears to be a promising alternative treatment to reduce 2,4-DCP bioavailability and thus toxicity in the environment.

[Biotreatment of chrolobenzene-contained waste gas in trickling biofilters enhanced by SDS]

Biofitlers inoculated P. putida strain and packed respectively with ACOF and ceramic pellets were employed to purify the chlorobenzene contained gases. An anionic surfactant, sodium dodecyl sulfonate (SDS) was introduced to trickling liquid to investigate its effect on the performance of biofilters. The result of microorganism cultivation shows that the inhibition to P. putida will be occurred when the SDS concentration in culture medium exceeded 35 mg/L. Addition of SDS in trickling liquid at concentration of 25 mg/L reduce the acclimatization periods and improve the performance of biofilter at stable condition. For the ACOF biofilter, the optimum SDS addition concentration is 25 mg/L, and the maximum elimination capacity of 234.7 g/(m3 x h) could be achieved. 18% - 20% of SDS in trickling liquid was lost after five days operation, but the lose could not reduce the efficiency of biofilter evidently.

Carbon-limited fed-batch production of medium-chain-length polyhydroxyalkanoates from nonanoic acid by Pseudomonas putida KT2440

Pseudomonas putida KT2440 grew on glucose at a specific rate of 0.48 h(-1) but accumulated almost no poly-3-hydroxyalkanoates (PHA). Subsequent nitrogen limitation on nonanoic acid resulted in the accumulation of only 27% medium-chain-length PHA (MCL-PHA). In contrast, exponential nonanoic acid-limited growth (mu = 0.15 h(-1)) produced 70 g l(-1) biomass containing 75% PHA. At a higher exponential feed rate (mu = 0.25 h(-1)), the overall productivity was increased but less biomass (56 g l(-1)) was produced due to higher oxygen demand, and the biomass contained less PHA (67%). It was concluded that carbon-limited exponential feeding of nonanoic acid or related substrates to cultures of P. putida KT2440 is a simple and highly effective method of producing MCL-PHA. Nitrogen limitation is unnecessary.

Differential response of etiolated pea seedlings to inoculation with rhizobacteria capable of utilizing 1-aminocyclopropane-1-carboxylate or L-methionine

The majority of soil microorganisms can derive ethylene from L-methionine (L-MET), while some rhizobacteria can hydrolyze 1-aminocyclopropane-1-carboxylate (ACC) due to their ACC-deaminase activity. In this study, three strains having either ACC-deaminase activity (Pseudomonas putida biotype A, A7), or the ability to produce ethylene from L-MET (Acinetobacter calcoaceticus, M9) or both (Pseudomonas fluorescens, AM3) were used for inoculation. The highly ethylene specific bioassay of a classical "triple" response in pea seedlings was used to investigate the effect of the inoculation with the rhizobacteria in the presence of 10 mM ACC or L-MET. The exogenous application of ACC had a concentration-dependent effect on the etiolated pea seedlings in creating the classical "triple" response. The inoculation with P. putida diluted the effect of ACC, which was most likely due to its ACC-deaminase activity. Similarly, the application of Co2+ reduced the ACC-imposed effect on etiolated pea seedlings. In contrast, the inoculation of A. calcoaceticus or P. fluorescens in the presence of L-MET caused a stronger classical "triple" response in etiolated pea seedlings; most likely by producing ethylene from L-MET. This is the first study, to our knowledge, reporting on the comparative effect of rhizobacteria capable of utilizing ACC vs L-MET on etiolated pea seedlings.

Analysis of novel soluble chromate and uranyl reductases and generation of an improved enzyme by directed evolution

Most polluted sites contain mixed waste. This is especially true of the U.S. Department of Energy (DOE) waste sites which hold a complex mixture of heavy metals, radionuclides, and organic solvents. In such environments enzymes that can remediate multiple pollutants are advantageous. We report here evolution of an enzyme, ChrR6 (formerly referred to as Y6), which shows a markedly enhanced capacity for remediating two of the most serious and prevalent DOE contaminants, chromate and uranyl. ChrR6 is a soluble enzyme and reduces chromate and uranyl intracellularly. Thus, the reduced product is at least partially sequestered and nucleated, minimizing the chances of reoxidation. Only one amino acid change, (Tyr)128(Asn), was responsible for the observed improvement. We show here that ChrR6 makes Pseudomonas putida and Escherichia coli more efficient agents for bioremediation if the cellular permeability barrier to the metals is decreased.

Non-UV based germicidal activity of metal-doped TiO2 coating on solid surfaces

A stain-based screening method was developed to screen different catalyst coatings for their germicidal activity. A Baclight dead/live bacteria viability kit (invitrogen, molecular probes) was used for staining the cell. The screening was carried out following a standard procedure. This included loading cell suspension to solid surface and maintaining contact for 30 min, then staining with a mixture containing dyes. The stained cells were observed using an epifluorescent microscope and photographed with a CCD camera under UV. Metal-doped TiO2 coatings on Al plates were prepared and tested for non-UV germicidal activity without using UV. It was tested using model microorganisms such as Bakers Yeast (Saccharomyces cerevisiae), Bacillus subtilis, Pseudomonas putida, and Escherichia coli. On the basis of the germicidal activity of catalyst and the degree of damage caused to the cells, the stained cells may appear green (viable), green with red or yellow nuclei and yellow (compromised) or red (nonviable). According to their stained color, cells were counted to calculate the percentage of dead, live, and compromised cells. Compromised cells are cells that grow very slowly after reculturing indicating a degree of reversible cell damage. Screening the germicidal activity using this staining method is accurate and efficient, and requires less time than the culture-based method. A modification to the procedure for measuring germicidal activity of rough surfaces or fibrous coatings was developed. Both TiO2 and metal-doped TiO2 (Ag, Pt, Au, Cu) possess non-UV based germicidal activity. The germicidal activity of TiO2 was found to be related with its wetting property and can be improved by UV irradiation before testing. It is not greatly affected by contact time, indicating a fast acting germicidal activity.

Introduction of a boost of Legionella pneumophila into a stagnant-water model by heat treatment

An environmentally representative stagnant-water model was developed to monitor the growth dynamics of Legionella pneumophila. This model was evaluated for three distinct water treatments: untreated tap water, heat-treated tap water, and heat-treated tap water supplemented with Pseudomonas putida, a known biofilm-forming bacterium. Bringing heat-treated tap water after subsequent cooling into contact with a densely formed untreated biofilm was found to promote the number of L. pneumophila by 4 log units within the biofilm, while the use of untreated water only sustained the L. pneumophila levels. Subsequent colonization of the water phase by L. pneumophila was noticed in the heat-treated stagnant-water models, with concentrations as high as 1 x 10(10) mip gene copies L(-1) stagnant water. Denaturing gradient gel electrophoresis in combination with clustering analysis of the prokaryotic community in the water phase and in the biofilm phase suggests that the different water treatments induced different communities. Moreover, boosts of L. pneumophila arising from heat treatment of water were accompanied by shifts to a more diverse eukaryotic community. Stimulated growth of L. pneumophila after heating of the water may explain the rapid recolonization of L. pneumophila in water systems. These results highlight the need for additional or alternative measures to heat treatment of water in order to prevent or abate potential outbreaks of L. pneumophila.

New insights on toluene biodegradation by Pseudomonas putida F1: influence of pollutant concentration and excreted metabolites

The influence of toluene concentration on the specific growth rate, cellular yield, specific CO(2), and metabolite production by Pseudomonas putida F1 (PpF1) was investigated. Both cellular yield and specific CO(2) production remained constant at 1.0 +/- 0.1 g biomass dry weight (DW) g(-1) toluene and 1.91 +/- 0.31 g CO(2) g(-1) biomass, respectively, under the tested range of concentrations (2-250 mg toluene l(-1)). The specific growth rate increased up to 70 mg toluene l(-1). Further increases in toluene concentration inhibited PpF1 growth, although inhibitory concentrations were far from the application range of biological treatment processes. The specific ATP content increased with toluene concentration up to toluene concentrations of 170 mg l(-1). 3-Methyl catechol (3-MC) was never detected in the cultivation medium despite being an intermediary in the TOD pathway. This suggested that the transformation from toluene to 3-MC was the limiting step in the biodegradation process. On the other hand, benzyl alcohol (BA) was produced from toluene in a side chain reaction. This is, to the best of our knowledge, the first reported case of methyl monoxygenation of toluene by PpF1 not harboring the pWW0 TOL plasmid. In addition, the influence of 3-MC, BA, and o-cresol on toluene degradation was investigated respirometrically, showing that toluene-associated respiration was not significantly inhibited in the presence of 10-100 mg l(-1) of the above-mentioned compounds.

Spread of a green fluorescent protein-tagged Pseudomonas putida in a water pipe following airborne contamination

An aerosol of green fluorescent protein-tagged Pseudomonas putida, created during high-pressure water cleaning of a coupon colonized by a biofilm of the green fluorescent protein bacterium, contaminated the water supply of an experimental setup. The upward spread of P. putida in a vertical pipe of supply water was 4.3 cm/day. Results highlight that a water supply to a food plant can be contaminated by an aerosol of environmental flora, created in typical cleaning operations, and become a reoccurring source of contamination. A practical response that could be taken in a food plant is briefly discussed.

Enhanced biodegradation of mixed phenol and sodium salicylate by Pseudomonas putida in membrane contactors

A polypropylene (PP) hollow fiber membrane contactor was used as a reactor to enhance the biodegradation of equimolar phenol and sodium salicylate (SA) by Pseudomonas putida CCRC 14365 at 30 degrees C and pH 7. Experiments were performed at a fixed initial cell density of 0.025 g/L and in the total substrate level range 5.32-63.8 mM. The degradation experiments by free cells were also studied for comparison. With pristine hydrophobic fibers, the degradation of SA was started only after phenol was completely consumed. Substrate inhibitory effect was avoided due to sufficiently low substrate levels in the cell medium; however, the biodegradation was time consuming. With ethanol-wetted fibers, both substrates were completely degraded much faster than the use of pristine fibers. Although the wetted fibers were unable to prevent movement of substrates through the pores, biofilm formed on the outer surfaces of the fibers could enhance the tolerance limit of substrate toxicity. This greatly extended the treatment range to high-level substrate mixtures, as long as the water was nearly neutral and free of concentrated inorganic salts.

The role of the siderophore pyridine-2,6-bis (thiocarboxylic acid) (PDTC) in zinc utilization by Pseudomonas putida DSM 3601

Previous work had suggested that in addition to serving the function of a siderophore, pyridine-2,6-bis(thiocarboxylic acid) (PDTC) may also provide producing organisms with the ability to assimilate other divalent transition metals. This was tested further by examining regulation of siderophore production, expression of pdt genes, and growth in response to added zinc. In media containing 10-50 microM ZnCl2, the production of PDTC was found to be differentially repressed, as compared with the production of pyoverdine. The expression of PdtK, the outer membrane receptor involved in PDTC transport, was also reduced in response to added zinc whereas other iron-regulated outer membrane proteins were not. Expression of a chromosomal pdtI: xylE fusion was repressed to a similar extent in response to zinc or iron. Mutants that cannot produce PDTC did not show a growth enhancement with micromolar concentrations of zinc as seen in the wild type strain. The phenotype of the mutant strains was suppressed by the addition of PDTC. The outer membrane receptor and inner membrane permease components of PDTC utilization were necessary for relief of chelator (1,10-phenanthroline)-induced growth inhibition by Zn:PDTC. Iron uptake from 55Fe:PDTC was not affected by a 32-fold molar excess of Zn:PDTC. The data indicate that zinc present as Zn:PDTC can be utilized by strains possessing PDTC utilization functions but that transport is much less efficient than for Fe:PDTC.

Proteins with GGDEF and EAL domains regulate Pseudomonas putida biofilm formation and dispersal

Microbial biofilm formation often causes problems in medical and industrial settings, and knowledge about the factors that are involved in biofilm development and dispersion is useful for creating strategies to control the processes. In this report, we present evidence that proteins with GGDEF and EAL domains are involved in the regulation of biofilm formation and biofilm dispersion in Pseudomonas putida. Overexpression in P. putida of the Escherichia coli YedQ protein, which contains a GGDEF domain, resulted in increased biofilm formation. Overexpression in P. putida of the E. coli YhjH protein, which contains an EAL domain, strongly inhibited biofilm formation. Induction of YhjH expression in P. putida cells situated in established biofilms led to rapid dispersion of the biofilms. These results support the emerging theme that GGDEF-domain and EAL-domain proteins are involved in regulating the transition of bacteria between a roaming lifestyle and a sessile biofilm lifestyle.

Role of eukaryotic microbiota in soil survival and catabolic performance of the 2,4-D herbicide degrading bacteria Cupriavidus necator JMP134

Cupriavidus necator (formerly Ralstonia eutropha) JMP134, harbouring the catabolic plasmid pJP4, is the best-studied 2,4-dichlorophenoxyacetic acid (2,4-D) herbicide degrading bacterium. A study of the survival and catabolic performance of strain JMP134 in agricultural soil microcosms exposed to high levels of 2,4-D was carried out. When C. necator JMP134 was introduced into soil microcosms, the rate of 2,4-D removal increased only slightly. This correlated with the poor survival of the strain, as judged by 16S rRNA gene terminal restriction fragment length polymorphism (T-RFLP) profiles, and the semi-quantitative detection of the pJP4-borne tfdA gene sequence, encoding the first step in 2,4-D degradation. After 3 days of incubation in irradiated soil microcosms, the survival of strain JMP134 dramatically improved and the herbicide was completely removed. The introduction of strain JMP134 into native soil microcosms did not produce detectable changes in the structure of the bacterial community, as judged by 16S rRNA gene T-RFLP profiles, but provoked a transient increase of signals putatively corresponding to protozoa, as indicated by 18S rRNA gene T-RFLP profiling. Accordingly, a ciliate able to feed on C. necator JMP134 could be isolated after soil enrichment. In native soil microcosms, C. necator JMP134 survived better than Escherichia coli DH5alpha (pJP4) and similarly to Pseudomonas putida KT2442 (pJP4), indicating that species specific factors control the survival of strains harbouring pJP4. The addition of cycloheximide to soil microcosms strongly improved survival of these three strains, indicating that the eukaryotic microbiota has a strong negative effect in bioaugmentation with catabolic bacteria.

Evidence of indigenous NAH plasmid of naphthalene degrading Pseudomonas putida PpG7 strain implicated in limonin degradation

A well characterized naphthalene-degrading strain, Pseudomonas putida PpG7 was observed to utilize limonin, a highly-oxygenated triterpenoid compound as a sole source of carbon and energy. Limonin concentrations evidenced a 64% reduction over 48 h of growth in batch cultures. Attempts were made to acquire a plasmid-less derivative via various methods (viz. Ethidium Bromide, SDS, elevated temperature & mitomycin C), among which the method involving mitomycin C (20 ug/ml) proved successful. Concomitant with the loss of plasmid in P. putida PpG7 strain, the cured derivative was identified as a lim- phenotype. The lim+ phenotype could be conjugally transferred to the cured derivative. Based on the results of curing with mitomycin C, conjugation studies and presence of ndo gene encoding naphthalene 1,2 dioxygenase, it was demonstrated that genes for the limonin utilization were encoded on an 83 kb indigenous transmissible Inc. P9 NAH plasmid in Pseudomonas putida PpG7 strain.

Identification of novel benzoylformate decarboxylases by growth selection

A growth selection system was established using Pseudomonas putida, which can grow on benzaldehyde as the sole carbon source. These bacteria presumably metabolize benzaldehyde via the beta-ketoadipate pathway and were unable to grow in benzoylformate-containing selective medium, but the growth deficiency could be restored by expression in trans of genes encoding benzoylformate decarboxylases. The selection system was used to identify three novel benzoylformate decarboxylases, two of them originating from a chromosomal library of P. putida ATCC 12633 and the third from an environmental-DNA library. The novel P. putida enzymes BfdB and BfdC exhibited 83% homology to the benzoylformate decarboxylase from P. aeruginosa and 63% to the enzyme MdlC from P. putida ATCC 12633, whereas the metagenomic BfdM exhibited 72% homology to a putative benzoylformate decarboxylase from Polaromonas naphthalenivorans. BfdC was overexpressed in Escherichia coli, and the enzymatic activity was determined to be 22 U/ml using benzoylformate as the substrate. Our results clearly demonstrate that P. putida KT2440 is an appropriate selection host strain suitable to identify novel benzoylformate decarboxylase-encoding genes. In principle, this system is also applicable to identify a broad range of different industrially important enzymes, such as benzaldehyde lyases, benzoylformate decarboxylases, and hydroxynitrile lyases, which all catalyze the formation of benzaldehyde.

Role of the ptsN gene product in catabolite repression of the Pseudomonas putida TOL toluene degradation pathway in chemostat cultures

The Pseudomonas putida KT2440 TOL upper pathway is repressed under nonlimiting conditions in cells growing in chemostat with succinate as a carbon source. We show that the ptsN gene product IIA(Ntr) participates in this repression. Crc, involved in yeast extract-dependent repression in batch cultures, did not influence expression when cells were growing in a chemostat with succinate at maximum rate.

System for determining the relative fitness of multiple bacterial populations without using selective markers

A device for simultaneously measuring the relative fitness of multiple bacterial populations was developed and evaluated. The new device eliminates the need to construct strains with selectively neutral markers so that strains can be readily distinguished, and it provides a means to perform multispecies competition experiments.