Performance of AI Approaches for COVID-19 Diagnosis Using Chest CT Scans: The Impact of Architecture and Dataset

AI is emerging as a promising tool for diagnosing COVID-19 based on chest CT scans. The aim of this study was the comparison of AI models for COVID-19 diagnosis. Therefore, we: (1) trained three distinct AI models for classifying COVID-19 and non-COVID-19 pneumonia (nCP) using a large, clinically relevant CT dataset, (2) evaluated the models' performance using an independent test set, and (3) compared the models both algorithmically and experimentally.In this multicenter multi-vendor study, we collected n=1591 chest CT scans of COVID-19 (n=762) and nCP (n=829) patients from China and Germany. In Germany, the data was collected from three RACOON sites. We trained and validated three COVID-19 AI models with different architectures: COVNet based on 2D-CNN, DeCoVnet based on 3D-CNN, and AD3D-MIL based on 3D-CNN with attention module. 991 CT scans were used for training the AI models using 5-fold cross-validation. 600 CT scans from 6 different centers were used for independent testing. The models' performance was evaluated using accuracy (Acc), sensitivity (Se), and specificity (Sp).The average validation accuracy of the COVNet, DeCoVnet, and AD3D-MIL models over the 5 folds was 80.9%, 82.0%, and 84.3%, respectively. On the independent test set with n=600 CT scans, COVNet yielded Acc=76.6%, Se=67.8%, Sp=85.7%; DeCoVnet provided Acc=75.1%, Se=61.2%, Sp=89.7%; and AD3D-MIL achieved Acc=73.9%, Se=57.7%, Sp=90.8%.The classification performance of the evaluated AI models is highly dependent on the training data rather than the architecture itself. Our results demonstrate a high specificity and moderate sensitivity. The AI classification models should not be used unsupervised but could potentially assist radiologists in COVID-19 and nCP identification. · This study compares AI approaches for diagnosing COVID-19 in chest CT scans, which is essential for further optimizing the delivery of healthcare and for pandemic preparedness.. · Our experiments using a multicenter, multi-vendor, diverse dataset show that the training data is the key factor in determining the diagnostic performance.. · The AI models should not be used unsupervised but as a tool to assist radiologists.. · Jaiswal A, Fervers P, Meng F et al. Performance of AI Approaches for COVID-19 Diagnosis Using Chest CT Scans: The Impact of Architecture and Dataset. Rofo 2025; DOI 10.1055/a-2577-3928.

Applications of artificial intelligence in ultrasound imaging for carpal-tunnel syndrome diagnosis: a scoping review

PURPOSE

The purpose of this scoping review is to analyze the application of artificial intelligence (AI) in ultrasound (US) imaging for diagnosing carpal tunnel syndrome (CTS), with an aim to explore the potential of AI in enhancing diagnostic accuracy, efficiency, and patient outcomes by automating tasks, providing objective measurements, and facilitating earlier detection of CTS.

METHODS

We systematically searched multiple electronic databases, including Embase, PubMed, IEEE Xplore, and Scopus, to identify relevant studies published up to January 1, 2025. Studies were included if they focused on the application of AI in US imaging for CTS diagnosis. Editorials, expert opinions, conference papers, dataset publications, and studies that did not have a clear clinical application of the AI algorithm were excluded.

RESULTS

345 articles were identified, following abstract and full-text review by two independent reviewers, 18 manuscripts were included. Of these, thirteen studies were experimental studies, three were comparative studies, and one was a feasibility study. All eighteen studies shared the common objective of improving CTS diagnosis and/or initial assessment using AI, with shared aims ranging from median nerve segmentation (n = 12) to automated diagnosis (n = 9) and severity classification (n = 2). The majority of studies utilized deep learning approaches, particularly CNNs (n = 15), and some focused on radiomics features (n = 5) and traditional machine learning techniques.

CONCLUSION

The integration of AI in US imaging for CTS diagnosis holds significant promise for transforming clinical practice. AI has the potential to improve diagnostic accuracy, streamline the diagnostic process, reduce variability, and ultimately lead to better patient outcomes. Further research is needed to address challenges related to dataset limitations, variability in US imaging, and ethical considerations.

Overview of artificial intelligence in hand surgery

Artificial intelligence has evolved significantly since its inception, becoming a powerful tool in medicine. This paper provides an overview of the core principles, applications and future directions of artificial intelligence in hand surgery. Artificial intelligence has shown promise in improving diagnostic accuracy, predicting outcomes and assisting in patient education. However, despite its potential, its application in hand surgery is still nascent, with most studies being retrospective and limited by small sample sizes. To harness the full potential of artificial intelligence in hand surgery and support broader adoption, more robust, large-scale studies are needed. Collaboration among researchers, through data sharing and federated learning, is essential for advancing artificial intelligence from experimental to clinically validated tools, ultimately enhancing patient care and clinical workflows.

Effectiveness of Comprehensive Video Datasets: Toward the Development of an Artificial Intelligence Model for Ultrasonography-Based Severity Diagnosis of Carpal Tunnel Syndrome

OBJECTIVES

Advances in diagnosing carpal tunnel syndrome (CTS) using ultrasonography (US) and artificial intelligence (AI) aim to replace nerve conduction studies. However, a method for accurate severity diagnosis remains unachieved. We explored the potential of comprehensive video data formats for constructing an effective model for diagnosing CTS severity.

METHODS

We studied 75 individuals (52 with CTS) from 2019 to 2022, categorizing them into 3 groups based on disease severity. We recorded 132 US videos of carpal tunnel during finger movement. Features of the median nerve (MN) were extracted from automatically segmented US video frames, from which 3 datasets were created: a comprehensive video dataset with full information, a key metrics dataset, and an initial frame dataset with the least information. We compared the accuracy of machine learning algorithms for classifying CTS severity into 3 groups across these datasets using 63-fold cross-validation.

RESULTS

The cross-sectional area of the MN correlated with severity (P < .05) but MN displacement did not. The algorithm using the comprehensive video dataset exhibited the highest sensitivity (1.00) and accuracy (0.75).

CONCLUSIONS

Our study demonstrated that utilizing comprehensive video data enables a more accurate US-based diagnosis of CTS severity. This underscores the value of capturing the patterns of MN deformation and movement, which cannot be captured by representative metrics such as medians or maximums. By further developing an AI model based on our findings, a simpler and painless method for assessing CTS severity can be achieved.

A machine learning approach for diagnostic and prognostic predictions, key risk factors and interactions

Machine learning (ML) has the potential to revolutionize healthcare, allowing healthcare providers to improve patient-care planning, resource planning and utilization. Furthermore, identifying key-risk-factors and interaction-effects can help service-providers and decision-makers to institute better policies and procedures. This study used COVID-19 electronic health record (EHR) data to predict five crucial outcomes: positive-test, ventilation, death, hospitalization days, and ICU days. Our models achieved high accuracy and precision, with AUC values of 91.6%, 99.1%, and 97.5% for the first three outcomes, and MAE of 0.752 and 0.257 days for the last two outcomes. We also identified interaction effects, such as high bicarbonate in arterial blood being associated with longer hospitalization in middleaged patients. Our models are embedded in a prototype of an online decision support tool that can be used by healthcare providers to make more informed decisions.

Magnetic-Plasmonic Core-Shell Nanoparticles: Properties, Synthesis and Applications for Cancer Detection and Treatment

Nanoparticles have been widely used in cancer diagnostics and treatment research due to their unique properties. Magnetic nanoparticles are popular in imaging techniques due to their ability to alter the magnetization field around them. Plasmonic nanoparticles are mainly applied in cancer treatments like photothermal therapy due to their ability to convert light into heat. While these nanoparticles are popular among their respective fields, magnetic-plasmonic core-shell nanoparticles (MPNPs) have gained popularity in recent years due to the combined magnetic and optical properties from the core and shell. MPNPs have stood out in cancer theranostics as a multimodal platform capable of serving as a contrast agent for imaging, a guidable drug carrier, and causing cellular ablation through photothermal energy conversion. In this review, we summarize the different properties of MPNPs and the most common synthesis approaches. We particularly discuss applications of MPNPs in cancer diagnosis and treatment based on different mechanisms using the magnetic and optical properties of the particles. Lastly, we look into current challenges they face for clinical applications and future perspectives using MPNPs for cancer detection and therapy.

Classification of CT scan and X-ray dataset based on deep learning and particle swarm optimization

In 2019, the novel coronavirus swept the world, exposing the monitoring and early warning problems of the medical system. Computer-aided diagnosis models based on deep learning have good universality and can well alleviate these problems. However, traditional image processing methods may lead to high false positive rates, which is unacceptable in disease monitoring and early warning. This paper proposes a low false positive rate disease detection method based on COVID-19 lung images and establishes a two-stage optimization model. In the first stage, the model is trained using classical gradient descent, and relevant features are extracted; in the second stage, an objective function that minimizes the false positive rate is constructed to obtain a network model with high accuracy and low false positive rate. Therefore, the proposed method has the potential to effectively classify medical images. The proposed model was verified using a public COVID-19 radiology dataset and a public COVID-19 lung CT scan dataset. The results show that the model has made significant progress, with the false positive rate reduced to 11.3% and 7.5%, and the area under the ROC curve increased to 92.8% and 97.01%.

The role of artificial intelligence in pandemic responses: from epidemiological modeling to vaccine development

Integrating Artificial Intelligence (AI) across numerous disciplines has transformed the worldwide landscape of pandemic response. This review investigates the multidimensional role of AI in the pandemic, which arises as a global health crisis, and its role in preparedness and responses, ranging from enhanced epidemiological modelling to the acceleration of vaccine development. The confluence of AI technologies has guided us in a new era of data-driven decision-making, revolutionizing our ability to anticipate, mitigate, and treat infectious illnesses. The review begins by discussing the impact of a pandemic on emerging countries worldwide, elaborating on the critical significance of AI in epidemiological modelling, bringing data-driven decision-making, and enabling forecasting, mitigation and response to the pandemic. In epidemiology, AI-driven epidemiological models like SIR (Susceptible-Infectious-Recovered) and SIS (Susceptible-Infectious-Susceptible) are applied to predict the spread of disease, preventing outbreaks and optimising vaccine distribution. The review also demonstrates how Machine Learning (ML) algorithms and predictive analytics improve our knowledge of disease propagation patterns. The collaborative aspect of AI in vaccine discovery and clinical trials of various vaccines is emphasised, focusing on constructing AI-powered surveillance networks. Conclusively, the review presents a comprehensive assessment of how AI impacts epidemiological modelling, builds AI-enabled dynamic models by collaborating ML and Deep Learning (DL) techniques, and develops and implements vaccines and clinical trials. The review also focuses on screening, forecasting, contact tracing and monitoring the virus-causing pandemic. It advocates for sustained research, real-world implications, ethical application and strategic integration of AI technologies to strengthen our collective ability to face and alleviate the effects of global health issues.

Deep learning models for CT image classification: a comprehensive literature review

Background and Objective

Computed tomography (CT) imaging plays a crucial role in the early detection and diagnosis of life-threatening diseases, particularly in respiratory illnesses and oncology. The rapid advancement of deep learning (DL) has revolutionized CT image analysis, enhancing diagnostic accuracy and efficiency. This review explores the impact of advanced DL methodologies in CT imaging, with a particular focus on their applications in coronavirus disease 2019 (COVID-19) detection and lung nodule classification.

Methods

A comprehensive literature search was conducted, examining the evolution of DL architectures in medical imaging from conventional convolutional neural networks (CNNs) to sophisticated foundational models (FMs). We reviewed publications from major databases, focusing on developments in CT image analysis using DL from 2013 to 2023. Our search criteria included all types of articles, with a focus on peer-reviewed research papers and review articles in English.

Key Content and Findings

The review reveals that DL, particularly advanced architectures like FMs, has transformed CT image analysis by streamlining interpretation processes and enhancing diagnostic capabilities. We found significant advancements in addressing global health challenges, especially during the COVID-19 pandemic, and in ongoing efforts for lung cancer screening. The review also addresses technical challenges in CT image analysis, including data variability, the need for large high-quality datasets, and computational demands. Innovative strategies such as transfer learning, data augmentation, and distributed computing are explored as solutions to these challenges.

Conclusions

This review underscores the pivotal role of DL in advancing CT image analysis, particularly for COVID-19 and lung nodule detection. The integration of DL models into clinical workflows shows promising potential to enhance diagnostic accuracy and efficiency. However, challenges remain in areas of interpretability, validation, and regulatory compliance. The review advocates for continued research, interdisciplinary collaboration, and ethical considerations as DL technologies become integral to clinical practice. While traditional imaging techniques remain vital, the integration of DL represents a significant advancement in medical diagnostics, with far-reaching implications for future research, clinical practice, and healthcare policy.

Outpatient Point-of-Care Ultrasound

The most commonly used outpatient primary care point-of-care ultrasound (POCUS) applications are similar to those used in the inpatient setting (eg, cardiac, pulmonary, and abdominal ultrasound). However, there are several additional POCUS applications that are highly applicable to the outpatient setting and should be considered for use by primary care practitioners. This article reviews 3 outpatient POCUS applications and their potential role in the primary care setting.

Challenges issues and future recommendations of deep learning techniques for SARS-CoV-2 detection utilising X-ray and CT images: a comprehensive review

The global spread of SARS-CoV-2 has prompted a crucial need for accurate medical diagnosis, particularly in the respiratory system. Current diagnostic methods heavily rely on imaging techniques like CT scans and X-rays, but identifying SARS-CoV-2 in these images proves to be challenging and time-consuming. In this context, artificial intelligence (AI) models, specifically deep learning (DL) networks, emerge as a promising solution in medical image analysis. This article provides a meticulous and comprehensive review of imaging-based SARS-CoV-2 diagnosis using deep learning techniques up to May 2024. This article starts with an overview of imaging-based SARS-CoV-2 diagnosis, covering the basic steps of deep learning-based SARS-CoV-2 diagnosis, SARS-CoV-2 data sources, data pre-processing methods, the taxonomy of deep learning techniques, findings, research gaps and performance evaluation. We also focus on addressing current privacy issues, limitations, and challenges in the realm of SARS-CoV-2 diagnosis. According to the taxonomy, each deep learning model is discussed, encompassing its core functionality and a critical assessment of its suitability for imaging-based SARS-CoV-2 detection. A comparative analysis is included by summarizing all relevant studies to provide an overall visualization. Considering the challenges of identifying the best deep-learning model for imaging-based SARS-CoV-2 detection, the article conducts an experiment with twelve contemporary deep-learning techniques. The experimental result shows that the MobileNetV3 model outperforms other deep learning models with an accuracy of 98.11%. Finally, the article elaborates on the current challenges in deep learning-based SARS-CoV-2 diagnosis and explores potential future directions and methodological recommendations for research and advancement.

A Novel Grammar-Based Approach for Patients' Symptom and Disease Diagnosis Information Dissemination to Maintain Confidentiality and Information Integrity

Disease prediction using computer-based methods is now an established area of research. The importance of technological intervention is necessary for the better management of disease, as well as to optimize use of limited resources. Various AI-based methods for disease prediction have been documented in the literature. Validated AI-based systems support diagnoses and decision making by doctors/medical practitioners. The resource-efficient dissemination of the symptoms identified and the diagnoses undertaken is the requirement of the present-day scenario to support paperless, yet seamless, information sharing. The representation of symptoms using grammar provides a novel way for the resource-efficient encoding of disease diagnoses. Initially, symptoms are represented as strings, and, in terms of grammar, this is called a sentence. Moreover, the conversion of the generated string containing the symptoms and the diagnostic outcome to a QR code post encryption makes it portable. The code can be stored in a mobile application, in a secure manner, and can be scanned wherever required, universally. The patient can carry the medical condition and the diagnosis in the form of the QR code for medical consultations. This research work presents a case study based on two diseases, influenza and coronavirus, to highlight the proposed methodology. Both diseases have some common and overlapping symptoms. The proposed system can be implemented for any kind of disease detection, including clinical and diagnostic imaging.

WAVELET-POOLING-BASED MULTI-SCALE CNN FOR COVID-19 DETECTION FROM CT IMAGES

COVID-19 is a respiratory disease affecting humans and animals. The disease has rapidly spread worldwide and became a pandemic in 2020. Preventing the virus from spreading has become increasingly challenging, especially with the need to test potential suspects rapidly. Deep learning-based methods have been developed to address this challenge of detecting COVID-19 from chest Computed Tomography (CT) images. The proposed network has multi-scale feature extraction layers with wavelet pooling. Learning features at different scales will enable the architecture to explore local patterns at different dimensions. So, in the proposed architecture, we have included a multi-scale convolutional layer to focus on sparse local regions about the disease conditions. Texture-based feature learning using wavelet pooling is incorporated into the architecture to improve detection performance. The proposed network achieved an accuracy of 99.79% with an AUC value of 0.9999. Compared with the existing methods, the proposed network has a lower computational cost regarding learnable parameters, FLOPS, and memory requirements. The proposed CNN model benefits from multi-scale structure and wavelet-pooling, resulting in superior performance compared to previous algorithms.

From Morphology to Therapeutic Strategies: Exploring New Applications of Ultrasound for Diabetic Peripheral Neuropathy Diagnosis and Management

Diabetic peripheral neuropathy (DPN) is a common complication of diabetes that can result in severe lower limb pain and amputation. Early detection and treatment of DPN are vital, but this condition is often missed due to a lack of symptoms and the insensitivity of testing methods. This article reviews various ultrasound imaging modalities in the direct and indirect evaluation of peripheral neuropathy. Moreover, how ultrasound-related therapeutic strategies are playing a role in clinical treatment is discussed. Finally, the application of innovative methodologies in the diagnosis of DPN, including ultrasound attenuation, photoacoustic imaging, and artificial intelligence, is described.

How AI Could Help Us in the Epidemiology and Diagnosis of Acute Respiratory Infections?

Acute respiratory infections (ARIs) represent a significant global health burden, contributing to high morbidity and mortality rates, particularly in vulnerable populations. Traditional methods for diagnosing and tracking ARIs often face limitations in terms of speed, accuracy, and scalability. The advent of artificial intelligence (AI) has the potential to revolutionize these processes by enhancing early detection, precise diagnosis, and effective epidemiological tracking. This review explores the integration of AI in the epidemiology and diagnosis of ARIs, highlighting its capabilities, current applications, and future prospects. By examining recent advancements and existing studies, this paper provides a comprehensive understanding of how AI can improve ARI management, offering insights into its practical applications and the challenges that must be addressed to realize its full potential.

Interpretation of Artificial Intelligence Models in Healthcare: A Pictorial Guide for Clinicians

Artificial intelligence (AI) models can play a more effective role in managing patients with the explosion of digital health records available in the healthcare industry. Machine-learning (ML) and deep-learning (DL) techniques are two methods used to develop predictive models that serve to improve the clinical processes in the healthcare industry. These models are also implemented in medical imaging machines to empower them with an intelligent decision system to aid physicians in their decisions and increase the efficiency of their routine clinical practices. The physicians who are going to work with these machines need to have an insight into what happens in the background of the implemented models and how they work. More importantly, they need to be able to interpret their predictions, assess their performance, and compare them to find the one with the best performance and fewer errors. This review aims to provide an accessible overview of key evaluation metrics for physicians without AI expertise. In this review, we developed four real-world diagnostic AI models (two ML and two DL models) for breast cancer diagnosis using ultrasound images. Then, 23 of the most commonly used evaluation metrics were reviewed uncomplicatedly for physicians. Finally, all metrics were calculated and used practically to interpret and evaluate the outputs of the models. Accessible explanations and practical applications empower physicians to effectively interpret, evaluate, and optimize AI models to ensure safety and efficacy when integrated into clinical practice.

Advances in Ultrasound-Guided Surgery and Artificial Intelligence Applications in Musculoskeletal Diseases

Ultrasound imaging is a vital imaging tool in musculoskeletal medicine, with the number of publications on ultrasound-guided surgery increasing in recent years, especially in minimally invasive procedures of sports, foot and ankle, and hand surgery. However, ultrasound imaging has drawbacks, such as operator dependency and image obscurity. Artificial intelligence (AI) and deep learning (DL), a subset of AI, can address these issues. AI/DL can enhance screening practices for hip dysplasia and osteochondritis dissecans (OCD) of the humeral capitellum, improve diagnostic accuracy for carpal tunnel syndrome (CTS), and provide physicians with better prognostic prediction tools for patients with knee osteoarthritis. Building on these advancements, DL methods, including segmentation, detection, and localization of target tissues and medical instruments, also have the potential to allow physicians and surgeons to perform ultrasound-guided procedures more accurately and efficiently. This review summarizes recent advances in ultrasound-guided procedures for musculoskeletal diseases and provides a comprehensive overview of the utilization of AI/DL in ultrasound for musculoskeletal medicine, particularly focusing on ultrasound-guided surgery.

Advances of surgical robotics: image-guided classification and application

Surgical robotics application in the field of minimally invasive surgery has developed rapidly and has been attracting increasingly more research attention in recent years. A common consensus has been reached that surgical procedures are to become less traumatic and with the implementation of more intelligence and higher autonomy, which is a serious challenge faced by the environmental sensing capabilities of robotic systems. One of the main sources of environmental information for robots are images, which are the basis of robot vision. In this review article, we divide clinical image into direct and indirect based on the object of information acquisition, and into continuous, intermittent continuous, and discontinuous according to the target-tracking frequency. The characteristics and applications of the existing surgical robots in each category are introduced based on these two dimensions. Our purpose in conducting this review was to analyze, summarize, and discuss the current evidence on the general rules on the application of image technologies for medical purposes. Our analysis gives insight and provides guidance conducive to the development of more advanced surgical robotics systems in the future.

Multi-granularity prior networks for uncertainty-informed patient-specific quality assurance

Deep Learning Automated Patient-Specific Quality Assurance (PSQA) aims to reduce clinical resource requirements. It is vital to ensure the safety and effectiveness of radiation therapy by predicting the dose difference metric (Gamma passing rate) and its distribution. However, current research overlooks uncertainty quantification in model predictions, limiting their trustworthiness in real clinical environments. This paper proposes a Multi-granularity Uncertainty Quantification (MGUQ) framework. A Bayesian framework that quantifies uncertainties at multiple granularities for multi-task PSQA, specifically Gamma Passing Rate (GPR) prediction and Dose Difference Prediction (DDP), integrates visualization-based interactive components. Using Bayesian theory, we derive a comprehensive multi-granularity loss function that comprises granularity-specific loss and coherence loss components. Additionally, we proposed Multi-granularity Prior Networks, a dual-stream network architecture, to infer the distributions of DDP (modeled as t-distributions) and GPR (modeled as Gaussian distributions) under specific statistical assumptions. Comprehensive evaluations are conducted on a dataset from ''Peeking Union Medical College Hospital'', and results show that our proposed method achieves a minimum MAE loss of 0.864 with a 2%/3 mm criterion and realizes the uncertainty visualization of dose difference. Further, it also achieves 100% Clinical Accuracy (CA) with a workload of 67.2%. Experiments demonstrate that the proposed framework can enhance the trustworthiness of deep learning applications in PSQA.

DeepCSFusion: Deep Compressive Sensing Fusion for Efficient COVID-19 Classification

Worldwide, the COVID-19 epidemic, which started in 2019, has resulted in millions of deaths. The medical research community has widely used computer analysis of medical data during the pandemic, specifically deep learning models. Deploying models on devices with constrained resources is a significant challenge due to the increased storage demands associated with larger deep learning models. Accordingly, in this paper, we propose a novel compression strategy that compresses deep features with a compression ratio of 10 to 90% to accurately classify the COVID-19 and non-COVID-19 computed tomography scans. Additionally, we extensively validated the compression using various available deep learning methods to extract the most suitable features from different models. Finally, the suggested DeepCSFusion model compresses the extracted features and applies fusion to achieve the highest classification accuracy with fewer features. The proposed DeepCSFusion model was validated on the publicly available dataset "SARS-CoV-2 CT" scans composed of 1252 CT. This study demonstrates that the proposed DeepCSFusion reduced the computational time with an overall accuracy of 99.3%. Also, it outperforms state-of-the-art pipelines in terms of various classification measures.

Automated segmentation of the median nerve in patients with carpal tunnel syndrome

Machine learning and deep learning are novel methods which are revolutionizing medical imaging. In our study we trained an algorithm with a U-Net shaped network to recognize ultrasound images of the median nerve in the complete distal half of the forearm and to measure the cross-sectional area at the inlet of the carpal tunnel. Images of 25 patient hands with carpal tunnel syndrome (CTS) and 26 healthy controls were recorded on a video loop covering 15 cm of the distal forearm and 2355 images were manually segmented. We found an average Dice score of 0.76 between manual and automated segmentation of the median nerve in its complete course, while the measurement of the cross-sectional area at the carpal tunnel inlet resulted in a 10.9% difference between manually and automated measurements. We regard this technology as a suitable device for verifying the diagnosis of CTS.

Multi-planar dual adversarial network based on dynamic 3D features for MRI-CT head and neck image synthesis

Objective.Head and neck radiotherapy planning requires electron densities from different tissues for dose calculation. Dose calculation from imaging modalities such as MRI remains an unsolved problem since this imaging modality does not provide information about the density of electrons.Approach.We propose a generative adversarial network (GAN) approach that synthesizes CT (sCT) images from T1-weighted MRI acquisitions in head and neck cancer patients. Our contribution is to exploit new features that are relevant for improving multimodal image synthesis, and thus improving the quality of the generated CT images. More precisely, we propose a Dual branch generator based on the U-Net architecture and on an augmented multi-planar branch. The augmented branch learns specific 3D dynamic features, which describe the dynamic image shape variations and are extracted from different view-points of the volumetric input MRI. The architecture of the proposed model relies on an end-to-end convolutional U-Net embedding network.Results.The proposed model achieves a mean absolute error (MAE) of18.76±5.167in the target Hounsfield unit (HU) space on sagittal head and neck patients, with a mean structural similarity (MSSIM) of0.95±0.09and a Frechet inception distance (FID) of145.60±8.38. The model yields a MAE of26.83±8.27to generate specific primary tumor regions on axial patient acquisitions, with a Dice score of0.73±0.06and a FID distance equal to122.58±7.55. The improvement of our model over other state-of-the-art GAN approaches is of 3.8%, on a tumor test set. On both sagittal and axial acquisitions, the model yields the best peak signal-to-noise ratio of27.89±2.22and26.08±2.95to synthesize MRI from CT input.Significance.The proposed model synthesizes both sagittal and axial CT tumor images, used for radiotherapy treatment planning in head and neck cancer cases. The performance analysis across different imaging metrics and under different evaluation strategies demonstrates the effectiveness of our dual CT synthesis model to produce high quality sCT images compared to other state-of-the-art approaches. Our model could improve clinical tumor analysis, in which a further clinical validation remains to be explored.

A Novel Hybrid Machine Learning-Based System Using Deep Learning Techniques and Meta-Heuristic Algorithms for Various Medical Datatypes Classification

Medicine is one of the fields where the advancement of computer science is making significant progress. Some diseases require an immediate diagnosis in order to improve patient outcomes. The usage of computers in medicine improves precision and accelerates data processing and diagnosis. In order to categorize biological images, hybrid machine learning, a combination of various deep learning approaches, was utilized, and a meta-heuristic algorithm was provided in this research. In addition, two different medical datasets were introduced, one covering the magnetic resonance imaging (MRI) of brain tumors and the other dealing with chest X-rays (CXRs) of COVID-19. These datasets were introduced to the combination network that contained deep learning techniques, which were based on a convolutional neural network (CNN) or autoencoder, to extract features and combine them with the next step of the meta-heuristic algorithm in order to select optimal features using the particle swarm optimization (PSO) algorithm. This combination sought to reduce the dimensionality of the datasets while maintaining the original performance of the data. This is considered an innovative method and ensures highly accurate classification results across various medical datasets. Several classifiers were employed to predict the diseases. The COVID-19 dataset found that the highest accuracy was 99.76% using the combination of CNN-PSO-SVM. In comparison, the brain tumor dataset obtained 99.51% accuracy, the highest accuracy derived using the combination method of autoencoder-PSO-KNN.

Application of radiomics model based on ultrasound image features in the prediction of carpal tunnel syndrome severity

OBJECTIVE

The aim of our study is to develop and validate a radiomics model based on ultrasound image features for predicting carpal tunnel syndrome (CTS) severity.

METHODS

This retrospective study included 237 CTS hands (106 for mild symptom, 68 for moderate symptom and 63 for severe symptom). There were no statistically significant differences among the three groups in terms of age, gender, race, etc. The data set was randomly divided into a training set and a test set in a ratio of 7:3. Firstly, a senior musculoskeletal ultrasound expert measures the cross-sectional area of median nerve (MN) at the scaphoid-pisiform level. Subsequently, a recursive feature elimination (RFE) method was used to identify the most discriminative radiomic features of each MN at the entrance of the carpal tunnel. Eventually, a random forest model was employed to classify the selected features for prediction. To evaluate the performance of the model, the confusion matrix, receiver operating characteristic (ROC) curves, and F1 values were calculated and plotted correspondingly.

RESULTS

The prediction capability of the radiomics model was significantly better than that of ultrasound measurements when 10 robust features were selected. The training set performed perfect classification with 100% accuracy for all participants, while the testing set performed accurate classification of severity for 76.39% of participants with F1 values of 80.00, 63.40, and 84.80 for predicting mild, moderate, and severe CTS, respectively. Comparably, the F1 values for mild, moderate, and severe CTS predicted based on the MN cross-sectional area were 76.46, 57.78, and 64.00, respectively..

CONCLUSION

This radiomics model based on ultrasound images has certain value in distinguishing the severity of CTS, and was slightly superior to using only MN cross-sectional area for judgment. Although its diagnostic efficacy was still inferior to that of neuroelectrophysiology. However, this method was non-invasive and did not require additional costs, and could provide additional information for clinical physicians to develop diagnosis and treatment plans.

Lung Disease Detection Using U-Net Feature Extractor Cascaded by Graph Convolutional Network

Computed tomography (CT) scans have recently emerged as a major technique for the fast diagnosis of lung diseases via image classification techniques. In this study, we propose a method for the diagnosis of COVID-19 disease with improved accuracy by utilizing graph convolutional networks (GCN) at various layer formations and kernel sizes to extract features from CT scan images. We apply a U-Net model to aid in segmentation and feature extraction. In contrast with previous research retrieving deep features from convolutional filters and pooling layers, which fail to fully consider the spatial connectivity of the nodes, we employ GCNs for classification and prediction to capture spatial connectivity patterns, which provides a significant association benefit. We handle the extracted deep features to form an adjacency matrix that contains a graph structure and pass it to a GCN along with the original image graph and the largest kernel graph. We combine these graphs to form one block of the graph input and then pass it through a GCN with an additional dropout layer to avoid overfitting. Our findings show that the suggested framework, called the feature-extracted graph convolutional network (FGCN), performs better in identifying lung diseases compared to recently proposed deep learning architectures that are not based on graph representations. The proposed model also outperforms a variety of transfer learning models commonly used for medical diagnosis tasks, highlighting the abstraction potential of the graph representation over traditional methods.

Combining serum microRNAs and machine learning algorithms for diagnosing infectious fever after HSCT

Infection post-hematopoietic stem cell transplantation (HSCT) is one of the main causes of patient mortality. Fever is the most crucial clinical symptom indicating infection. However, current microbial detection methods are limited. Therefore, timely diagnosis of infectious fever and administration of antimicrobial drugs can effectively reduce patient mortality. In this study, serum samples were collected from 181 patients with HSCT with or without infection, as well as the clinical information. And more than 80 infectious-related microRNAs in the serum were selected according to the bulk RNA-seq result and detected in the 345 time-pointed serum samples by Q-PCR. Unsupervised clustering result indicates a close association between these microRNAs expression and infection occurrence. Compared to the uninfected cohort, more than 10 serum microRNAs were identified as the combined diagnostic markers in one formula constructed by the Random Forest (RF) algorithms, with a diagnostic accuracy more than 0.90. Furthermore, correlations of serum microRNAs to immune cells, inflammatory factors, pathgens, infection tissue, and prognosis were analyzed in the infection cohort. Overall, this study demonstrates that the combination of serum microRNAs detection and machine learning algorithms holds promising potential in diagnosing infectious fever after HSCT.

Spatiotemporal estimation of groundwater and surface water conditions by integrating deep learning and physics-based watershed models

The impacts of climate change on hydrology underscore the urgency of understanding watershed hydrological patterns for sustainable water resource management. The conventional physics-based fully distributed hydrological models are limited due to computational demands, particularly in the case of large-scale watersheds. Deep learning (DL) offers a promising solution for handling large datasets and extracting intricate data relationships. Here, we propose a DL modeling framework, incorporating convolutional neural networks (CNNs) to efficiently replicate physics-based model outputs at high spatial resolution. The goal was to estimate groundwater head and surface water depth in the Sabgyo Stream Watershed, South Korea. The model datasets consisted of input variables, including elevation, land cover, soil type, evapotranspiration, rainfall, and initial hydrological conditions. The initial conditions and target data were obtained from the fully distributed hydrological model HydroGeoSphere (HGS), whereas the other inputs were actual measurements in the field. By optimizing the training sample size, input design, CNN structure, and hyperparameters, we found that CNNs with residual architectures (ResNets) yielded superior performance. The optimal DL model reduces computation time by 45 times compared to the HGS model for monthly hydrological estimations over five years (RMSE 2.35 and 0.29 m for groundwater and surface water, respectively). In addition, our DL framework explored the predictive capabilities of hydrological responses to future climate scenarios. Although the proposed model is cost-effective for hydrological simulations, further enhancements are needed to improve the accuracy of long-term predictions. Ultimately, the proposed DL framework has the potential to facilitate decision-making, particularly in large-scale and complex watersheds.

Carpal tunnel syndrome prediction with machine learning algorithms using anthropometric and strength-based measurement

OBJECTIVES

Carpal tunnel syndrome (CTS) stands as the most prevalent upper extremity entrapment neuropathy, with a multifaceted etiology encompassing various risk factors. This study aimed to investigate whether anthropometric measurements of the hand, grip strength, and pinch strength could serve as predictive indicators for CTS through machine learning techniques.

METHODS

Enrollment encompassed patients exhibiting CTS symptoms (n = 56) and asymptomatic healthy controls (n = 56), with confirmation via electrophysiological assessments. Anthropometric measurements of the hand were obtained using a digital caliper, grip strength was gauged via a digital handgrip dynamometer, and pinch strengths were assessed using a pinchmeter. A comprehensive analysis was conducted employing four most common and effective machine learning algorithms, integrating thorough parameter tuning and cross-validation procedures. Additionally, the outcomes of variable importance were presented.

RESULTS

Among the diverse algorithms, Random Forests (accuracy of 89.474%, F1-score of 0.905, and kappa value of 0.789) and XGBoost (accuracy of 86.842%, F1-score of 0.878, and kappa value of 0.736) emerged as the top-performing choices based on distinct classification metrics. In addition, using variable importance calculations specific to these models, the most important variables were found to be wrist circumference, hand width, hand grip strength, tip pinch, key pinch, and middle finger length.

CONCLUSION

The findings of this study demonstrated that wrist circumference, hand width, hand grip strength, tip pinch, key pinch, and middle finger length can be utilized as reliable indicators of CTS. Also, the model developed herein, along with the identified crucial variables, could serve as an informative guide for healthcare professionals, enhancing precision and efficacy in CTS prediction.

Hematin anhydride (β-hematin): An analogue to malaria pigment hemozoin possesses nonlinearity

Hematin anhydride (β-hematin), the synthetic analogue of the malaria pigment, "hemozoin", is a heme dimer produced by reciprocal covalent bonds among carboxylic acid groups on the protoporphyrin-IX ring and the iron atom present in the two adjacent heme molecules. Hemozoin is a disposal product formed from the digestion of hemoglobin present in the red blood cells infected with hematophagous malaria parasites. Besides, as the parasites invade red blood cells, hemozoin crystals are eventually released into the bloodstream, where they accumulate over time in tissues. Severe malaria infection leads to significant dysfunction in vital organs such as the liver, spleen, and brain in part due to the autoimmune response to the excessive accumulation of hemozoin in these tissues. Also, the amount of these crystals in the vasculature correlates with disease progression. Thus, hemozoin is a unique indicator of infection used as a malaria biomarker and hence, used as a target for the development of antimalarial drugs. Hence, exploring various properties of hemozoin is extremely useful in the direction of diagnosis and cure. The present study focuses on finding one of the unknown properties of β-hematin in physiological conditions by using the Z-scan technique, which is simple, sensitive, and economical. It is observed that hemozoin possesses one of the unique material properties, i.e., nonlinearity with a detection limit of ∼ 15 µM. The self-defocusing action causes β-hematin to exhibit negative refractive nonlinearity. The observed data is analyzed with a thermal lensing model. We strongly believe that our simple and reliable approach to probing the nonlinearity of β-hematin will provide fresh opportunities for malaria diagnostics & cure in the near future.

Dual-drug delivery by thermo-responsive Janus nanogel for improved cellular uptake, sustained release, and combination chemo-thermal therapy

The goal of this work was to examine the heat-sensitizing effects of Janus-coated magnetic nanoparticles (JMNPs) as a vehicle for 5-fluorouracil (5-Fu) and Quercetin (Qu) in C6 and OLN-93 cell lines. The cellular uptake of nanoparticles was evaluated using Prussian blue staining and ICP-OES after monolayer culturing of C6 (rat brain cancer cell) and OLN-93 (normal rat brain cell) cells. The cells were treated with free 5-Fu, Qu, and MJNPs loaded with Qu/5-Fu for 24 h, followed by magnetic hyperthermia under an alternating magnetic field (AMF) at a temperature of 43 °C. Using the MTT test and Flow cytometry, the C6 and OLN-93 cells were investigated after being subjected to hyperthermia with and without magnetic nanoparticles. The results of Prussian blue staining confirmed the potential of MJNPs as carriers that facilitate the uptake of drugs by cancer cells. The results showed that the combined application of Qu/5-Fu/MJNPs with hyperthermia significantly increased the amount of ROS production compared to interventions without MJNPs. The therapeutic results demonstrated that the combination of Qu/5-Fu/MJNPs with hyperthermia considerably enhanced the rate of apoptotic and necrotic cell death compared to that of interventions without MJNPs. Furthermore, MTT findings indicated that controlled exposure of Qu/5-Fu/MJNPs to AMF caused a synergistic effect. The advanced Janus magnetic nanoparticles in this study can be proposed as a promising dual drug carrier (Qu/5-Fu) and thermosensitizer platform for dual-modal synergistic cancer therapy.

A Hybrid Deep Learning CNN model for COVID-19 detection from chest X-rays

Coronavirus disease (COVID-2019) is emerging in Wuhan, China in 2019. It has spread throughout the world since the year 2020. Millions of people were affected and caused death to them till now. To avoid the spreading of COVID-2019, various precautions and restrictions have been taken by all nations. At the same time, infected persons are needed to identify and isolate, and medical treatment should be provided to them. Due to a deficient number of Reverse Transcription Polymerase Chain Reaction (RT-PCR) tests, a Chest X-ray image is becoming an effective technique for diagnosing COVID-19. In this work, the Hybrid Deep Learning CNN model is proposed for the diagnosis COVID-19 using chest X-rays. The proposed model consists of a heading model and a base model. The base model utilizes two pre-trained deep learning structures such as VGG16 and VGG19. The feature dimensions from these pre-trained models are reduced by incorporating different pooling layers, such as max and average. In the heading part, dense layers of size three with different activation functions are also added. A dropout layer is supplemented to avoid overfitting. The experimental analyses are conducted to identify the efficacy of the proposed hybrid deep learning with existing transfer learning architectures such as VGG16, VGG19, EfficientNetB0 and ResNet50 using a COVID-19 radiology database. Various classification techniques, such as K-Nearest Neighbor (KNN), Naive Bayes, Random Forest, Support Vector Machine (SVM), and Neural Network, were also used for the performance comparison of the proposed model. The hybrid deep learning model with average pooling layers, along with SVM-linear and neural networks, both achieved an accuracy of 92%.These proposed models can be employed to assist radiologists and physicians in avoiding misdiagnosis rates and to validate the positive COVID-19 infected cases.

COVID-19 detection in lung CT slices using Brownian-butterfly-algorithm optimized lightweight deep features

Several deep-learning assisted disease assessment schemes (DAS) have been proposed to enhance accurate detection of COVID-19, a critical medical emergency, through the analysis of clinical data. Lung imaging, particularly from CT scans, plays a pivotal role in identifying and assessing the severity of COVID-19 infections. Existing automated methods leveraging deep learning contribute significantly to reducing the diagnostic burden associated with this process. This research aims in developing a simple DAS for COVID-19 detection using the pre-trained lightweight deep learning methods (LDMs) applied to lung CT slices. The use of LDMs contributes to a less complex yet highly accurate detection system. The key stages of the developed DAS include image collection and initial processing using Shannon's thresholding, deep-feature mining supported by LDMs, feature optimization utilizing the Brownian Butterfly Algorithm (BBA), and binary classification through three-fold cross-validation. The performance evaluation of the proposed scheme involves assessing individual, fused, and ensemble features. The investigation reveals that the developed DAS achieves a detection accuracy of 93.80% with individual features, 96% accuracy with fused features, and an impressive 99.10% accuracy with ensemble features. These outcomes affirm the effectiveness of the proposed scheme in significantly enhancing COVID-19 detection accuracy in the chosen lung CT database.

Diagnostic performance of deep learning models versus radiologists in COVID-19 pneumonia: A systematic review and meta-analysis

PURPOSE

Although several studies have compared the performance of deep learning (DL) models and radiologists for the diagnosis of COVID-19 pneumonia on CT of the chest, these results have not been collectively evaluated. We performed a meta-analysis of original articles comparing the performance of DL models versus radiologists in detecting COVID-19 pneumonia.

METHODS

A systematic search was conducted on the three main medical literature databases, Scopus, Web of Science, and PubMed, for articles published as of February 1st, 2023. We included original scientific articles that compared DL models trained to detect COVID-19 pneumonia on CT to radiologists. Meta-analysis was performed to determine DL versus radiologist performance in terms of model sensitivity and specificity, taking into account inter and intra-study heterogeneity.

RESULTS

Twenty-two articles met the inclusion criteria. Based on the meta-analytic calculations, DL models had significantly higher pooled sensitivity (0.933 vs. 0.829, p < 0.001) compared to radiologists with similar pooled specificity (0.905 vs. 0.897, p = 0.746). In the differentiation of COVID-19 versus community-acquired pneumonia, the DL models had significantly higher sensitivity compared to radiologists (0.915 vs. 0.836, p = 0.001).

CONCLUSIONS

DL models have high performance for screening of COVID-19 pneumonia on chest CT, offering the possibility of these models for augmenting radiologists in clinical practice.

Concordance and generalization of an AI algorithm with real-world clinical data in the pre-omicron and omicron era

All viruses, including SARS-CoV-2, the virus responsible for COVID-19, continue to evolve, which can lead to new variants. The objective of this study is to assess the agreement between real-world clinical data and an algorithm that utilizes laboratory markers and age to predict the progression of disease severity in COVID-19 patients during the pre-Omicron and Omicron variant periods. The study evaluated the performance of a deep learning (DL) algorithm in predicting disease severity scores for COVID-19 patients using data from the USA, Spain, and Turkey (Ankara City Hospital (ACH) data set). The algorithm was developed and validated using pre-Omicron era data and was tested on both pre-Omicron and Omicron-era data. The predictions were compared to the actual clinical outcomes using a multidisciplinary approach. The concordance index values for all datasets ranged from 0.71 to 0.81. In the ACH cohort, a negative predictive value (NPV) of 0.78 or higher was observed for severe patients in both the pre-Omicron and Omicron eras, which is consistent with the algorithm's performance in the development cohort.

Nanotechnology-based theranostic and prophylactic approaches against SARS-CoV-2

SARS-CoV-2 (COVID-19) pandemic has been an unpredicted burden on global healthcare system by infecting over 700 million individuals, with approximately 6 million deaths worldwide. COVID-19 significantly impacted all sectors, but it very adversely affected the healthcare system. These effects were much more evident in the resource limited part of the world. Individuals with acute conditions were also severely impacted. Although classical COVID-19 diagnostics such as RT-PCR and rapid antibody testing have played a crucial role in reducing the spread of infection, these diagnostic techniques are associated with certain limitations. For instance, drawback of RT-PCR diagnostics is that due to degradation of viral RNA during shipping, it can give false negative results. Also, rapid antibody testing majorly depends on the phase of infection and cannot be performed on immune compromised individuals. These limitations in current diagnostic tools require the development of nanodiagnostic tools for early detection of COVID-19 infection. Therefore, the SARS-CoV-2 outbreak has necessitated the development of specific, responsive, accurate, rapid, low-cost, and simple-to-use diagnostic tools at point of care. In recent years, early detection has been a challenge for several health diseases that require prompt attention and treatment. Disease identification at an early stage, increased imaging of inner health issues, and ease of diagnostic processes have all been established using a new discipline of laboratory medicine called nanodiagnostics, even before symptoms have appeared. Nanodiagnostics refers to the application of nanoparticles (material with size equal to or less than 100 nm) for medical diagnostic purposes. The special property of nanomaterials compared to their macroscopic counterparts is a lesser signal loss and an enhanced electromagnetic field. Nanosize of the detection material also enhances its sensitivity and increases the signal to noise ratio. Microchips, nanorobots, biosensors, nanoidentification of single-celled structures, and microelectromechanical systems are some of the most modern nanodiagnostics technologies now in development. Here, we have highlighted the important roles of nanotechnology in healthcare sector, with a detailed focus on the management of the COVID-19 pandemic. We outline the different types of nanotechnology-based diagnostic devices for SARS-CoV-2 and the possible applications of nanomaterials in COVID-19 treatment. We also discuss the utility of nanomaterials in formulating preventive strategies against SARS-CoV-2 including their use in manufacture of protective equipment, formulation of vaccines, and strategies for directly hindering viral infection. We further discuss the factors hindering the large-scale accessibility of nanotechnology-based healthcare applications and suggestions for overcoming them.

One-Stop Automated Diagnostic System for Carpal Tunnel Syndrome in Ultrasound Images Using Deep Learning

OBJECTIVE

Ultrasound (US) examination has unique advantages in diagnosing carpal tunnel syndrome (CTS), although identification of the median nerve (MN) and diagnosis of CTS depend heavily on the expertise of examiners. In the aim of alleviating this problem, we developed a one-stop automated CTS diagnosis system (OSA-CTSD) and evaluated its effectiveness as a computer-aided diagnostic tool.

METHODS

We combined real-time MN delineation, accurate biometric measurements and explainable CTS diagnosis into a unified framework, called OSA-CTSD. We then collected a total of 32,301 static images from US videos of 90 normal wrists and 40 CTS wrists for evaluation using a simplified scanning protocol.

RESULTS

The proposed model exhibited better segmentation and measurement performance than competing methods, with a Hausdorff distance (95th percentile) score of 7.21 px, average symmetric surface distance score of 2.64 px, Dice score of 85.78% and intersection over union score of 76.00%. In the reader study, it exhibited performance comparable to the average performance of experienced radiologists in classifying CTS and outperformed inexperienced radiologists in terms of classification metrics (e.g., accuracy score 3.59% higher and F1 score 5.85% higher).

CONCLUSION

Diagnostic performance of the OSA-CTSD was promising, with the advantages of real-time delineation, automation and clinical interpretability. The application of such a tool not only reduces reliance on the expertise of examiners but also can help to promote future standardization of the CTS diagnostic process, benefiting both patients and radiologists.

Self-attention-driven retrieval of chest CT images for COVID-19 assessment

Numerous methods have been developed for computer-aided diagnosis (CAD) of coronavirus disease-19 (COVID-19), based on chest computed tomography (CT) images. The majority of these methods are based on deep neural networks and often act as "black boxes" that cannot easily gain the trust of medical community, whereas their result is uniformly influenced by all image regions. This work introduces a novel, self-attention-driven method for content-based image retrieval (CBIR) of chest CT images. The proposed method analyzes a query CT image and returns a classification result, as well as a list of classified images, ranked according to similarity with the query. Each CT image is accompanied by a heatmap, which is derived by gradient-weighted class activation mapping (Grad-CAM) and represents the contribution of lung tissue and lesions to COVID-19 pathology. Beyond visualization, Grad-CAM weights are employed in a self-attention mechanism, in order to strengthen the influence of the most COVID-19-related image regions on the retrieval result. Experiments on two publicly available datasets demonstrate that the binary classification accuracy obtained by means of DenseNet-201 is 81.3% and 96.4%, for COVID-CT and SARS-CoV-2 datasets, respectively, with a false negative rate which is less than 3% in both datasets. In addition, the Grad-CAM-guided CBIR framework slightly outperforms the plain CBIR in most cases, with respect to nearest neighbour (NN) and first four (FF). The proposed method could serve as a computational tool for a more transparent decision-making process that could be trusted by the medical community. In addition, the employed self-attention mechanism increases the obtained retrieval performance.

"KAIZEN" method realizing implementation of deep-learning models for COVID-19 CT diagnosis in real world hospitals

Numerous COVID-19 diagnostic imaging Artificial Intelligence (AI) studies exist. However, none of their models were of potential clinical use, primarily owing to methodological defects and the lack of implementation considerations for inference. In this study, all development processes of the deep-learning models are performed based on strict criteria of the "KAIZEN checklist", which is proposed based on previous AI development guidelines to overcome the deficiencies mentioned above. We develop and evaluate two binary-classification deep-learning models to triage COVID-19: a slice model examining a Computed Tomography (CT) slice to find COVID-19 lesions; a series model examining a series of CT images to find an infected patient. We collected 2,400,200 CT slices from twelve emergency centers in Japan. Area Under Curve (AUC) and accuracy were calculated for classification performance. The inference time of the system that includes these two models were measured. For validation data, the slice and series models recognized COVID-19 with AUCs and accuracies of 0.989 and 0.982, 95.9% and 93.0% respectively. For test data, the models' AUCs and accuracies were 0.958 and 0.953, 90.0% and 91.4% respectively. The average inference time per case was 2.83 s. Our deep-learning system realizes accuracy and inference speed high enough for practical use. The systems have already been implemented in four hospitals and eight are under progression. We released an application software and implementation code for free in a highly usable state to allow its use in Japan and globally.

Automatic Osteoporosis Screening System Using Radiomics and Deep Learning from Low-Dose Chest CT Images

OBJECTIVE

Develop two fully automatic osteoporosis screening systems using deep learning (DL) and radiomics (Rad) techniques based on low-dose chest CT (LDCT) images and evaluate their diagnostic effectiveness.

METHODS

In total, 434 patients who underwent LDCT and bone mineral density (BMD) examination were retrospectively enrolled and divided into the development set (n = 333) and temporal validation set (n = 101). An automatic thoracic vertebra cancellous bone (TVCB) segmentation model was developed. The Dice similarity coefficient (DSC) was used to evaluate the segmentation performance. Furthermore, the three-class Rad and DL models were developed to distinguish osteoporosis, osteopenia, and normal bone mass. The diagnostic performance of these models was evaluated using the receiver operating characteristic (ROC) curve and decision curve analysis (DCA).

RESULTS

The automatic segmentation model achieved excellent segmentation performance, with a mean DSC of 0.96 ± 0.02 in the temporal validation set. The Rad model was used to identify osteoporosis, osteopenia, and normal BMD in the temporal validation set, with respective area under the receiver operating characteristic curve (AUC) values of 0.943, 0.801, and 0.932. The DL model achieved higher AUC values of 0.983, 0.906, and 0.969 for the same categories in the same validation set. The Delong test affirmed that both models performed similarly in BMD assessment. However, the accuracy of the DL model is 81.2%, which is better than the 73.3% accuracy of the Rad model in the temporal validation set. Additionally, DCA indicated that the DL model provided a greater net benefit compared to the Rad model across the majority of the reasonable threshold probabilities Conclusions: The automated segmentation framework we developed can accurately segment cancellous bone on low-dose chest CT images. These predictive models, which are based on deep learning and radiomics, provided comparable diagnostic performance in automatic BMD assessment. Nevertheless, it is important to highlight that the DL model demonstrates higher accuracy and precision than the Rad model.

Combating COVID-19 Crisis using Artificial Intelligence (AI) Based Approach: Systematic Review

BACKGROUND

SARS-CoV-2, the unique coronavirus that causes COVID-19, has wreaked damage around the globe, with victims displaying a wide range of difficulties that have encouraged medical professionals to look for innovative technical solutions and therapeutic approaches. Artificial intelligence-based methods have contributed a significant part in tackling complicated issues, and some institutions have been quick to embrace and tailor these solutions in response to the COVID-19 pandemic's obstacles. Here, in this review article, we have covered a few DL techniques for COVID-19 detection and diagnosis, as well as ML techniques for COVID-19 identification, severity classification, vaccine and drug development, mortality rate prediction, contact tracing, risk assessment, and public distancing. This review illustrates the overall impact of AI/ML tools on tackling and managing the outbreak.

PURPOSE

The focus of this research was to undertake a thorough evaluation of the literature on the part of Artificial Intelligence (AI) as a complete and efficient solution in the battle against the COVID-19 epidemic in the domains of detection and diagnostics of disease, mortality prediction and vaccine as well as drug development.

METHODS

A comprehensive exploration of PubMed, Web of Science, and Science Direct was conducted using PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analysis) regulations to find all possibly suitable papers conducted and made publicly available between December 1, 2019, and August 2023. COVID-19, along with AI-specific words, was used to create the query syntax.

RESULTS

During the period covered by the search strategy, 961 articles were published and released online. Out of these, a total of 135 papers were chosen for additional investigation. Mortality rate prediction, early detection and diagnosis, vaccine as well as drug development, and lastly, incorporation of AI for supervising and controlling the COVID-19 pandemic were the four main topics focused entirely on AI applications used to tackle the COVID-19 crisis. Out of 135, 60 research papers focused on the detection and diagnosis of the COVID-19 pandemic. Next, 19 of the 135 studies applied a machine-learning approach for mortality rate prediction. Another 22 research publications emphasized the vaccine as well as drug development. Finally, the remaining studies were concentrated on controlling the COVID-19 pandemic by applying AI AI-based approach to it.

CONCLUSION

We compiled papers from the available COVID-19 literature that used AI-based methodologies to impart insights into various COVID-19 topics in this comprehensive study. Our results suggest crucial characteristics, data types, and COVID-19 tools that can aid in medical and translational research facilitation.

AFEX-Net: Adaptive feature extraction convolutional neural network for classifying computerized tomography images

Purpose

Deep convolutional neural networks are favored methods that are widely used in medical image processing due to their demonstrated performance in this area. Recently, the emergence of new lung diseases, such as COVID-19, and the possibility of early detection of their symptoms from chest computerized tomography images has attracted many researchers to classify diseases by training deep convolutional neural networks on lung computerized tomography images. The trained networks are expected to distinguish between different lung indications in various diseases, especially at the early stages. The purpose of this study is to introduce and assess an efficient deep convolutional neural network, called AFEX-Net, that can classify different lung diseases from chest computerized tomography images.

Methods

We designed a lightweight convolutional neural network called AFEX-Net with adaptive feature extraction layers, adaptive pooling layers, and adaptive activation functions. We trained and tested AFEX-Net on a dataset of more than 10,000 chest computerized tomography slices from different lung diseases (CC dataset), using an effective pre-processing method to remove bias. We also applied AFEX-Net to the public COVID-CTset dataset to assess its generalizability. The study was mainly conducted based on data collected over approximately six months during the pandemic outbreak in Afzalipour Hospital, Iran, which is the largest hospital in Southeast Iran.

Results

AFEX-Net achieved high accuracy and fast training on both datasets, outperforming several state-of-the-art convolutional neural networks. It has an accuracy of 99.7 % and 98.8 % on the CC and COVID-CTset datasets, respectively, with a learning speed that is 3 times faster compared to similar methods due to its lightweight structure. AFEX-Net was able to extract distinguishing features and classify chest computerized tomography images, especially at the early stages of lung diseases.

Conclusion

The AFEX-Net is a high-performing convolutional neural network for classifying lung diseases from chest CT images. It is efficient, adaptable, and compatible with input data, making it a reliable tool for early detection and diagnosis of lung diseases.

A study on the recognition of monkeypox infection based on deep convolutional neural networks

Introduction

The World Health Organization (WHO) has assessed the global public risk of monkeypox as moderate, and 71 WHO member countries have reported more than 14,000 cases of monkeypox infection. At present, the identification of clinical symptoms of monkeypox mainly depends on traditional medical means, which has the problems of low detection efficiency and high detection cost. The deep learning algorithm is excellent in image recognition and can extract and recognize image features quickly and reliably.

Methods

Therefore, this paper proposes a residual convolutional neural network based on the λ function and contextual transformer (LaCTResNet) for the image recognition of monkeypox cases.

Results

The average recognition accuracy of the neural network model is 91.85%, which is 15.82% higher than that of the baseline model ResNet50 and better than the classical convolutional neural networks models such as AlexNet, VGG16, Inception-V3, and EfficientNet-B5.

Discussion

This method realizes high-precision identification of skin symptoms of the monkeypox virus to provide a fast and reliable auxiliary diagnosis method for monkeypox cases for front-line medical staff.

Development and validation of a deep learning model for multicategory pneumonia classification on chest computed tomography: a multicenter and multireader study

Background

Accurate diagnosis of pneumonia is vital for effective disease management and mortality reduction, but it can be easily confused with other conditions on chest computed tomography (CT) due to an overlap in imaging features. We aimed to develop and validate a deep learning (DL) model based on chest CT for accurate classification of viral pneumonia (VP), bacterial pneumonia (BP), fungal pneumonia (FP), pulmonary tuberculosis (PTB), and no pneumonia (NP) conditions.

Methods

In total, 1,776 cases from five hospitals in different regions were retrospectively collected from September 2019 to June 2023. All cases were enrolled according to inclusion and exclusion criteria, and ultimately 1,611 cases were used to develop the DL model with 5-fold cross-validation, with 165 cases being used as the external test set. Five radiologists blindly reviewed the images from the internal and external test sets first without and then with DL model assistance. Precision, recall, F1-score, weighted F1-average, and area under the curve (AUC) were used to evaluate the model performance.

Results

The F1-scores of the DL model on the internal and external test sets were, respectively, 0.947 [95% confidence interval (CI): 0.936-0.958] and 0.933 (95% CI: 0.916-0.950) for VP, 0.511 (95% CI: 0.487-0.536) and 0.591 (95% CI: 0.557-0.624) for BP, 0.842 (95% CI: 0.824-0.860) and 0.848 (95% CI: 0.824-0.873) for FP, 0.843 (95% CI: 0.826-0.861) and 0.795 (95% CI: 0.767-0.822) for PTB, and 0.975 (95% CI: 0.968-0.983) and 0.976 (95% CI: 0.965-0.986) for NP, with a weighted F1-average of 0.883 (95% CI: 0.867-0.898) and 0.846 (95% CI: 0.822-0.871), respectively. The model performed well and showed comparable performance in both the internal and external test sets. The F1-score of the DL model was higher than that of radiologists, and with DL model assistance, radiologists achieved a higher F1-score. On the external test set, the F1-score of the DL model (F1-score 0.848; 95% CI: 0.824-0.873) was higher than that of the radiologists (F1-score 0.541; 95% CI: 0.507-0.575) as was its precision for the other three pneumonia conditions (all P values <0.001). With DL model assistance, the F1-score for FP (F1-score 0.541; 95% CI: 0.507-0.575) was higher than that achieved without assistance (F1-score 0.778; 95% CI: 0.750-0.807) as was its precision for the other three pneumonia conditions (all P values <0.001).

Conclusions

The DL approach can effectively classify pneumonia and can help improve radiologists' performance, supporting the full integration of DL results into the routine workflow of clinicians.

Discrimination of benign and malignant breast lesions on dynamic contrast-enhanced magnetic resonance imaging using deep learning

PURPOSE

To evaluate the capability of deep transfer learning (DTL) and fine-tuning methods in differentiating malignant from benign lesions in breast dynamic contrast-enhanced magnetic resonance imaging (DCE-MRI).

METHODS

The diagnostic efficiencies of the VGG19, ResNet50, and DenseNet201 models were tested under the same dataset. The model with the highest performance was selected and modified utilizing three fine-tuning strategies (S1-3). Fifty additional lesions were selected to form the validation set to verify the generalization abilities of these models. The accuracy (Ac) of the different models in the training and test sets, as well as the precision (Pr), recall rate (Rc), F1 score (), and area under the receiver operating characteristic curve (AUC), were primary performance indicators. Finally, the kappa test was used to compare the degree of agreement between the DTL models and pathological diagnosis in differentiating malignant from benign breast lesions.

RESULTS

The Pr, Rc, f1, and AUC of VGG19 (86.0%, 0.81, 0.81, and 0.81, respectively) were higher than those of DenseNet201 (70.0%, 0.61, 0.63, and 0.61, respectively) and ResNet50 (61.0%, 0.59, 0.59, and 0.59). After fine-tuning, the Pr, Rc, f1, and AUC of S1 (87.0%, 0.86, 0.86, and 0.86, respectively) were higher than those of VGG19. Notably, the degree of agreement between S1 and pathological diagnosis in differentiating malignant from benign breast lesions was 0.720 (κ = 0.720), which was higher than that of DenseNet201 (κ = 0.440), VGG19 (κ = 0.640), and ResNet50 (κ = 0.280).

CONCLUSION

The VGG19 model is an effective method for identifying benign and malignant breast lesions on DCE-MRI, and its performance can be further improved via fine-tuning. Overall, our findings insinuate that this technique holds potential clinical application value.

Visual transformer and deep CNN prediction of high-risk COVID-19 infected patients using fusion of CT images and clinical data

BACKGROUND

Despite the globally reducing hospitalization rates and the much lower risks of Covid-19 mortality, accurate diagnosis of the infection stage and prediction of outcomes are clinically of interest. Advanced current technology can facilitate automating the process and help identifying those who are at higher risks of developing severe illness. This work explores and represents deep-learning-based schemes for predicting clinical outcomes in Covid-19 infected patients, using Visual Transformer and Convolutional Neural Networks (CNNs), fed with 3D data fusion of CT scan images and patients' clinical data.

METHODS

We report on the efficiency of Video Swin Transformers and several CNN models fed with fusion datasets and CT scans only vs. a set of conventional classifiers fed with patients' clinical data only. A relatively large clinical dataset from 380 Covid-19 diagnosed patients was used to train/test the models.

RESULTS

Results show that the 3D Video Swin Transformers fed with the fusion datasets of 64 sectional CT scans + 67 clinical labels outperformed all other approaches for predicting outcomes in Covid-19-infected patients amongst all techniques (i.e., TPR = 0.95, FPR = 0.40, F0.5 score = 0.82, AUC = 0.77, Kappa = 0.6).

CONCLUSIONS

We demonstrate how the utility of our proposed novel 3D data fusion approach through concatenating CT scan images with patients' clinical data can remarkably improve the performance of the models in predicting Covid-19 infection outcomes.

SIGNIFICANCE

Findings indicate possibilities of predicting the severity of outcome using patients' CT images and clinical data collected at the time of admission to hospital.

COVID-19 and beyond: leveraging artificial intelligence for enhanced outbreak control

COVID-19 has brought significant changes to our political, social, and technological landscape. This paper explores the emergence and global spread of the disease and focuses on the role of Artificial Intelligence (AI) in containing its transmission. To the best of our knowledge, there has been no scientific presentation of the early pictorial representation of the disease's spread. Additionally, we outline various domains where AI has made a significant impact during the pandemic. Our methodology involves searching relevant articles on COVID-19 and AI in leading databases such as PubMed and Scopus to identify the ways AI has addressed pandemic-related challenges and its potential for further assistance. While research suggests that AI has not fully realized its potential against COVID-19, likely due to data quality and diversity limitations, we review and identify key areas where AI has been crucial in preparing the fight against any sudden outbreak of the pandemic. We also propose ways to maximize the utilization of AI's capabilities in this regard.

Sickle cell disease classification using deep learning

This paper presents a transfer and deep learning based approach to the classification of Sickle Cell Disease (SCD). Five transfer learning models such as ResNet-50, AlexNet, MobileNet, VGG-16 and VGG-19, and a sequential convolutional neural network (CNN) have been implemented for SCD classification. ErythrocytesIDB dataset has been used for training and testing the models. In order to make up for the data insufficiency of the erythrocytesIDB dataset, advanced image augmentation techniques are employed to ensure the robustness of the dataset, enhance dataset diversity and improve the accuracy of the models. An ablation experiment using Random Forest and Support Vector Machine (SVM) classifiers along with various hyperparameter tweaking was carried out to determine the contribution of different model elements on their predicted accuracy. A rigorous statistical analysis was carried out for evaluation and to further evaluate the model's robustness, an adversarial attack test was conducted. The experimental results demonstrate compelling performance across all models. After performing the statistical tests, it was observed that MobileNet showed a significant improvement (p = 0.0229), while other models (ResNet-50, AlexNet, VGG-16, VGG-19) did not (p > 0.05). Notably, the ResNet-50 model achieves remarkable precision, recall, and F1-score values of 100 % for circular, elongated, and other cell shapes when experimented with a smaller dataset. The AlexNet model achieves a balanced precision (98 %) and recall (99 %) for circular and elongated shapes. Meanwhile, the other models showcase competitive performance.

The Potential of Ultrasound Radiomics in Carpal Tunnel Syndrome Diagnosis: A Systematic Review and Meta-Analysis

Background: Carpal tunnel syndrome (CTS) is the most common entrapment neuropathy for which ultrasound imaging has recently emerged as a valuable diagnostic tool. This meta-analysis aims to investigate the role of ultrasound radiomics in the diagnosis of CTS and compare it with other diagnostic approaches. Methods: We conducted a comprehensive search of electronic databases from inception to September 2023. The included studies were assessed for quality using the Quality Assessment Tool for Diagnostic Accuracy Studies. The primary outcome was the diagnostic performance of ultrasound radiomics compared to radiologist evaluation for diagnosing CTS. Results: Our meta-analysis included five observational studies comprising 840 participants. In the context of radiologist evaluation, the combined statistics for sensitivity, specificity, and diagnostic odds ratio were 0.78 (95% confidence interval (CI), 0.71 to 0.83), 0.72 (95% CI, 0.59 to 0.81), and 9 (95% CI, 5 to 15), respectively. In contrast, the ultrasound radiomics training mode yielded a combined sensitivity of 0.88 (95% CI, 0.85 to 0.91), a specificity of 0.88 (95% CI, 0.84 to 0.92), and a diagnostic odds ratio of 58 (95% CI, 38 to 87). Similarly, the ultrasound radiomics testing mode demonstrated an aggregated sensitivity of 0.85 (95% CI, 0.78 to 0.89), a specificity of 0.80 (95% CI, 0.73 to 0.85), and a diagnostic odds ratio of 22 (95% CI, 12 to 41). Conclusions: In contrast to assessments by radiologists, ultrasound radiomics exhibited superior diagnostic performance in detecting CTS. Furthermore, there was minimal variability in the diagnostic accuracy between the training and testing sets of ultrasound radiomics, highlighting its potential as a robust diagnostic tool in CTS.

Deep Learning-Based Approaches for Enhanced Diagnosis and Comprehensive Understanding of Carpal Tunnel Syndrome

Carpal tunnel syndrome (CTS) is a prevalent medical condition resulting from compression of the median nerve in the hand, often caused by overuse or age-related factors. In this study, a total of 160 patients participated, including 80 individuals with CTS presenting varying levels of severity across different age groups. Numerous studies have explored the use of machine learning (ML) and deep learning (DL) techniques for CTS diagnosis. However, further research is required to fully leverage the potential of artificial intelligence (AI) technology in CTS diagnosis, addressing the challenges and limitations highlighted in the existing literature. In our work, we propose a novel approach for CTS diagnosis, prediction, and monitoring disease progression. The proposed framework consists of three main layers. Firstly, we employ three distinct DL models for CTS diagnosis. Through our experiments, the proposed approach demonstrates superior performance across multiple evaluation metrics, with an accuracy of 0.969%, precision of 0.982%, and recall of 0.963%. The second layer focuses on predicting the cross-sectional area (CSA) at 1, 3, and 6 months using ML models, aiming to forecast disease progression during therapy. The best-performing model achieves an accuracy of 0.9522, an R2 score of 0.667, a mean absolute error (MAE) of 0.0132, and a median squared error (MdSE) of 0.0639. The highest predictive performance is observed after 6 months. The third layer concentrates on assessing significant changes in the patients' health status through statistical tests, including significance tests, the Kruskal-Wallis test, and a two-way ANOVA test. These tests aim to determine the effect of injections on CTS treatment. The results reveal a highly significant reduction in symptoms, as evidenced by scores from the Symptom Severity Scale and Functional Status Scale, as well as a decrease in CSA after 1, 3, and 6 months following the injection. SHAP is then utilized to provide an understandable explanation of the final prediction. Overall, our study presents a comprehensive approach for CTS diagnosis, prediction, and monitoring, showcasing promising results in terms of accuracy, precision, and recall for CTS diagnosis, as well as effective prediction of disease progression and evaluation of treatment effectiveness through statistical analysis.