Molecular recognition in chemical and biological systems

Dynamic Near-Infrared Circularly Polarized Luminescence Encoded by Transient Supramolecular Chiral Assemblies

Circularly polarized luminescence (CPL) is promising for applications in many fields. However, most systems involving CPL are within the visible range; near-infrared (NIR) CPL-active materials, especially those that exhibit high glum values and can be controlled spatially and temporally, are rare. Herein, dynamic NIR-CPL with a glum value of 2.5×10-2 was achieved through supramolecular coassembly and energy-transfer strategies. The chiral assemblies formed by the coassembly between adenosine triphosphate (ATP) and a pyrene derivative exhibited a red CPL signal (glum of 10-3). The further introduction of sulfo-cyanine5 resulted in a energy-transfer process, which not only led to the NIR CPL but also increased the glum value to 10-2. Temporal control of these chiral assemblies was realized by introducing alkaline phosphatase to fabricate a biomimetic enzyme-catalyzed network, allowing the dynamic NIR CPL signal to be turned on. Based on these enzyme-regulated temporally controllable dynamic CPL-active chiral assemblies, a multilevel information encryption system was further developed. This study provides a pioneering example for the construction of dynamic NIR CPL materials with the ability to perform temporal control via the supramolecular assembly strategy, which is expected to aid in the design of supramolecular complex systems that more closely resemble natural biological systems.

Insights into the terahertz response of L-glutamic acid and its receptor

L-Glutamic acid (L-Glu) is a basic unit of proteins and also serves as an important neurotransmitter in the central nervous system. Its structural properties are critical for biological functions and selective receptor recognition. Although this molecule has been extensively studied, the low frequency vibrational behavior that is closely related to conformational changes and the intermolecular interactions between L-Glu and its receptors are still unclear. In this study, we acquired the fingerprint spectrum of L-Glu by using air plasma terahertz (THz) time-domain spectroscopy in the 0.5-18 THz range. The low frequency vibrational characteristics of L-Glu were investigated through density functional theory (DFT) calculations. The THz responses of the ligand binding domain of the NMDAR-L-Glu complex were studied by the ONIOM method, with a focus on discussing the normal modes and interactions of ligand L-Glu and water molecules. The results illustrate that THz spectroscopy exhibits a sensitive response to the influence of L-Glu on the structure of the NMDAR. The water molecules in proteins have various strong vibration modes in the THz band, showing specificity, diversity and complexity of vibrational behavior. There is potential for influencing and regulating the structural stability of the NMDAR-L-Glu complex through water molecules.

A High-Throughput Screening Strategy for Synthesizing Molecularly Imprinted Polymer Nanoparticles Selectively Targeting Tumors

Molecularly imprinted polymers (MIPs) show significant promise as effective alternatives to antibodies in disease diagnosis and therapy. However, the challenging process of screening extensive libraries of monomer combinations and synthesis conditions to identify formulations with enhanced selectivity and affinity presents a notable time constraint. The need for expedient methods becomes clear in accelerating the strategic development of MIPs tailored for precise molecular recognition purposes. In this study, an innovative high-throughput screening methodology designed to identify the optimal MIP formulation for targeting tumors is presented. Employing a microtiter plate format, over 100 polymer syntheses are conducted, incorporating diverse combinations of functional monomers. Evaluation of binding performance utilizes fluorescence-based assays, focusing on an epitope of the epidermal growth factor receptor (EGFR). Through this meticulously structured screening process, synthesis conditions that produced MIP nanoparticles exhibiting substantial specificity for EGFR targeting (KD = 10-12 m) are identified. These "bionic antibodies" demonstrate selective recognition of cancer cells in whole blood samples, even at concentrations as low as 5 cells mL-1. Further validation through fluorescent imaging confirms the tumor-specific localization of the MIPs in vivo. This highly efficient screening approach facilitates the strategic synthesis of imprinted polymers functioning as precision bioprobes.

The role of the methoxy group in approved drugs

The methoxy substituent is prevalent in natural products and, consequently, is present in many natural product-derived drugs. It has also been installed in modern drug molecules with no remnant of natural product features because medicinal chemists have been taking advantage of the benefits that this small functional group can bestow on ligand-target binding, physicochemical properties, and ADME parameters. Herein, over 230 methoxy-containing small-molecule drugs, as well as several fluoromethoxy-containing drugs, are presented from the vantage point of the methoxy group. Biochemical mechanisms of action, medicinal chemistry SAR studies, and numerous X-ray cocrystal structures are analyzed to identify the precise role of the methoxy group for many of the drugs and drug classes. Although the methoxy substituent can be considered as the hybridization of a hydroxy and a methyl group, the combination of these functionalities often results in unique effects that can amount to more than the sum of the individual parts.

A protocol to isolate, identify, and verify glucose- or carbohydrate-binding receptors

Sensing, transport, and utilization of glucose is pivotal to the maintenance of energy homeostasis in animals. Although transporters involved in mobilizing glucose across different cellular compartments are fairly well known, the receptors that bind glucose to mediate its effects independently of glucose metabolism remain largely unrecognized. Establishing precise and reproducible methods to identify glucose receptors in the brain or other peripheral organs will pave the way for comprehending the role of glucose signaling pathways in maintaining, regulating, and reprogramming cellular metabolic needs. Identification of such potential glucose receptors will also likely lead to development of effective therapeutics for treatment of diabetes and related metabolic disorders. Commercially available biotin or radiolabeled glucose conjugates have low molecular weight; therefore, they do not provide enough sensitivity and density to isolate glucose receptors. Here, we describe a protocol to isolate, identify, and verify glucose-binding receptor/s using high molecular weight glucose (or other carbohydrate) conjugates. We have produced 30 kDa glucose- (or other carbohydrate-) biotin-polyacrylamide (PAA) conjugates with mole fractions of 80:5:15% respectively. These conjugates are used with biotin-streptavidin biochemistry, In-cell ELISA, and surface plasmon resonance (SPR) methods to isolate, identify, and verify glucose- or carbohydrate-binding receptors. We first demonstrate how streptavidin-coated magnetic beads are employed to immobilize glucose-biotin-PAA conjugates. Then, these beads are used to enrich and isolate glucose-binding proteins from tissue homogenates or from single-cell suspensions. The enriched or isolated proteins are subjected to mass spectrometry/proteomics to reveal the identity of top candidate proteins as potential glucose receptors. We then describe how the In-cell ELISA method is used to verify the interaction of glucose with its potential receptor through stable expression of the receptor in-vitro. We further demonstrate how a highly sensitive SPR method can be used to measure the binding kinetics of glucose with its receptor. In summary, we describe a protocol to isolate, identify, and verify glucose- or carbohydrate-binding receptors using magnetic beads, In-cell ELISA, and SPR. This protocol will form the future basis of studying glucose or carbohydrate receptor signaling pathways in health and in disease.

Under the Influence of Water: Molecular Recognition of Organic Hydrophilic Molecules in Water with a Prismarene Host Driven by Hydration Effects

A water-soluble prism[5]arene host can form endo-cavity complexes with hydrophilic organic substances in water by displacing frustrated water molecules from its deep cavity. Water molecules structured at both rims of the prismarene host can mediate hydrogen bonding interactions with the guest. Water-mediated hydrogen bonding interactions were invoked here to elucidate the elevated binding affinities and selectivity of the prismarene host toward hydrophilic organic guests. We show that water at the interface of a host-guest complex can act as an extension of the host structure, facilitating the accommodation of neutral guests within the binding site. This study highlights the crucial role of water in facilitating supramolecular interactions between a deep-cavity prismarene host and organic hydrophilic guests in aqueous medium.

Expanding the Hydrophobic Cavity Surface of Azocalix[4]arene to Enable Biotin/Avidin Affinity with Controlled Release

The development of artificial receptors that combine ultrahigh-affinity binding and controllable release for active guests holds significant importance in biomedical applications. On one hand, a complex with an exceedingly high binding affinity can resist unwanted dissociation induced by dilution effect and complex interferents within physiological environments. On the other hand, stimulus-responsive release of the guest is essential for precisely activating its function. In this context, we expanded hydrophobic cavity surface of a hypoxia-responsive azocalix[4]arene, affording Naph-SAC4A. This modification significantly enhanced its aqueous binding affinity to 1013 M-1, akin to the naturally occurring strongest recognition pair, biotin/(strept-)avidin. Consequently, Naph-SAC4A emerges as the first artificial receptor to simultaneously integrate ultrahigh recognition affinity and actively controllable release. The markedly enhanced affinity not only improved Naph-SAC4A's sensitivity in detecting rocuronium bromide in serum, but also refined the precision of hypoxia-responsive doxorubicin delivery at the cellular level, demonstrating its immense potential for diverse practical applications.

Triazoles in Medicinal Chemistry: Physicochemical Properties, Bioisosterism, and Application

Triazole demonstrates distinctive physicochemical properties, characterized by weak basicity, various dipole moments, and significant dual hydrogen bond acceptor and donor capabilities. These features are poised to play a pivotal role in drug-target interactions. The inherent polarity of triazole contributes to its lower logP, suggesting the potential improvement in water solubility. The metabolic stability of triazole adds additional value to drug discovery. Moreover, the metal-binding capacity of the nitrogen atom lone pair electrons of triazole has broad applications in the development of metal chelators and antifungal agents. This Perspective aims to underscore the unique physicochemical attributes of triazole and its application. A comparative analysis involving triazole isomers and other heterocycles provides guiding insights for the subsequent design of triazoles, with the hope of offering valuable considerations for designing other heterocycles in medicinal chemistry.

Pillarurilarenes: Glycoluril-Expanded Pillararenes

Glycoluril-expanded pillararenes composed of glycoluril and dialkoxybenzene units, namely, pillarurilarenes (PURA), were synthesized through a fragment coupling macrocyclization strategy. Partial replacement of dialkoxybenzene with glycoluril endows PURA with polarized equatorial methine protons for derivatization or CH-anion binding. Crystal structures of pillar[2]uril[4]arene and pillar[1]uril[4]arene containing two glycoluril units and one glycoluril unit, respectively, indicated the inward orientation of the glycoluril unit, as also suggested by 1H nuclear magnetic resonance and density functional theory calculation. This work lays a good foundation for expanding pillararenes using non-aromatic rings.

Pillar[6]MaxQ functions as an in vivo sequestrant for rocuronium and vecuronium

The binding affinity of pillar[6]MaxQ toward a panel of neuromuscular blockers and neurotransmitters was measured in phosphate buffered saline by isothermal titration calorimetry and 1H NMR spectroscopy. In vivo efficacy studies showed that P6MQ sequesters rocuronium and vecuronium and reverses their influence on the recovery of the train-of-four (TOF) ratio.

Unraveling pnicogen bonding cooperativity: Insights from molecular electrostatic potential analysis

A theoretical investigation on the cooperativity of a series of binary, ternary, and quaternary complexes interconnected by pnicogen bonds has been conducted using calculations at the M06-2X/aug-cc-pVTZ level of density functional theory. By measuring changes in the molecular electrostatic potential (MESP) at the nucleus of interacting atoms in all of the complexes, it is possible to quantify the substantial reorganization of the electron density triggered by the formation of pnicogen bonds. The positive change in MESP, indicating a loss of electron density from the donor molecule in a dimer, facilitates the acceptance of electron density from a third molecule, resulting in the formation of a ternary complex with a stronger pnicogen bond compared to the one present in the binary complex. Similarly, the acceptor molecule in a dimer with a negative change in MESP showed an enhanced tendency to donate electron density to an electron-deficient third molecule. The MESP analysis provided valuable insights into the donor/acceptor characteristics of pnicogen bonds within the quaternary complexes. The proposed MESP hypotheses are consistent with the positive cooperativity observed in the pnicogen-bonded clusters. To quantify the changes in MESP, both at the donor atom (ΔVdonor ) and the acceptor atom (ΔVacceptor ), for all pnicogen bonds in the cluster, the total change in MESP (ΔΔVn ) was measured as ΔΔVn  = ∑(ΔVdonor )-∑(ΔVacceptor ). Remarkably, ΔΔVn exhibited a strong linear relationship with the sum of the bond energies of the pnicogen bonds in the cluster. This establishes the MESP analysis as a robust approach for understanding the strength and cooperative behavior of pnicogen-bonded clusters. Additionally, the MESP features provided clear evidence of pnicogen bond formation, further supporting the reliability of this approach.

Exploring Unconventional σ-Hole Interactions: Computational Insights into the Interaction of XeO3 with Non-Aromatic Coordinating Solvents

In order to control the explosiveness and shock sensitivity of XeO3 , we have investigated its plausible interaction with various non-aromatic coordinating solvents, serving as potential Lewis base donors, through density functional theory (DFT) calculations. Out of twenty six such solvents, the top ten were thus identified and then thoroughly examined by employing various computational tools such as the mapping of the electrostatic potential surface (MESP), Wiberg bond indices (WBIs), non-covalent interaction (NCI) plots, Bader's theory of atoms-in-molecules (AIM), natural bond orbital (NBO) analysis, and the energy decomposition analysis (EDA). The amphoteric nature of XeO3 was also explored by investigating the extent of back donation from the lone pair of Xe to the antibonding orbital of the donating atom/group of the solvent molecules. The C-H…O interactions were also found to be a contributing factor in the stabilization of these adducts. Although these aerogen-bonding interactions were found to be predominantly electrostatic, significant contributions from the orbital contributions, as well as dispersion interactions, were observed. The top three non-aromatic solvents (among the twenty six studied) which form the strongest adducts with XeO3 are proposed to be hexamethylphosphoramide (HMPA), N,N'-dimethylpropyleneurea (DMPU) and tetramethylethylenediamine (TMEDA).

A Mutagen Acts as a Potent Reducing Agent of Glycated Hemoglobin: a Combined Ultrafast Electron Transfer and Computational Studies

Glycated hemoglobin (GHb) found in mammals undergoes irreversible damage when exposed to external redox agents, which is much more vulnerable than its normal counterpart hemoglobin (Hb). Besides the oxygen regulation throughout the body, Hb plays a vital role in balancing immunological health and the redox cycle. Photoinduced ultra-fast electron transfer phenomena actively participate in regulation of various kind of homeostasis involved in such biomacromolecules. In the present study we have shown that a well-known mutagen Ethidium Bromide (EtBr) reduces GHb in femtosecond time scale (efficiently) upon photoexcitation after efficient recognition in the biomolecule. We have performed similar experiment by colocalizing EtBr and Iron (Fe(III)) on the micellar surface as Hb mimic in order to study the excited state EtBr dynamics to rationalize the time scale obtained from EtBr in GHb and Hb. While other experimental techniques including Dynamic Light Scattering (DLS), Zeta potential, absorbance and emission spectroscopy have been employed for the confirmation of structural perturbation of GHb compared to Hb, a detailed computational studies involving molecular docking and density functional theory (DFT) have been employed for the explanation of the experimental observations.

Overcoming barriers with non-covalent interactions: supramolecular recognition of adamantyl cucurbit[n]uril assemblies for medical applications

Adamantane, a staple in medicinal chemistry, recently became a cornerstone of a supramolecular host-guest drug delivery system, ADA/CB[n]. Owing to a good fit between the adamantane cage and the host cavity of the cucurbit[n]uril macrocycle, formed strong inclusion complexes find applications in drug delivery and controlled drug release. Note that the cucurbit[n]uril host is not solely a delivery vehicle of the ADA/CB[n] system but rather influences the bioactivity and bioavailability of drug molecules and can tune drug properties. Namely, as host-guest interactions are capable of changing the intrinsic properties of the guest molecule, inclusion complexes can become more soluble, bioavailable and more resistant to metabolic conditions compared to individual non-complexed molecules. Such synergistic effects have implications for practical bioapplicability of this complex system and provide a new viewpoint to therapy, beyond the traditional single drug molecule approach. By achieving a balance between guest encapsulation and release, the ADA/CB[n] system has also found use beyond just drug delivery, in fields like bioanalytics, sensing assays, bioimaging, etc. Thus, chemosensing in physiological conditions, indicator displacement assays, in vivo diagnostics and hybrid nanostructures are just some recent examples of the ADA/CB[n] applicability, be it for displacements purposes or as cargo vehicles.

An Assessment of Dispersion-Corrected DFT Methods for Modeling Nonbonded Interactions in Protein Kinase Inhibitor Complexes

Accurate modeling of nonbonded interactions between protein kinases and their small molecule inhibitors is essential for structure-based drug design. Quantum chemical methods such as density functional theory (DFT) hold significant promise for quantifying the strengths of these key protein-ligand interactions. However, the accuracy of DFT methods can vary substantially depending on the choice of exchange-correlation functionals and associated basis sets. In this study, a comprehensive benchmarking of nine widely used DFT methods was carried out to identify an optimal approach for quantitative modeling of nonbonded interactions, balancing both accuracy and computational efficiency. From a database of 2139 kinase-inhibitor crystal structures, a diverse library of 49 nonbonded interaction motifs was extracted, encompassing CH-π, π-π stacking, cation-π, hydrogen bonding, and salt bridge interactions. The strengths of nonbonded interaction energies for all 49 motifs were calculated at the advanced CCSD(T)/CBS level of theory, which serve as references for a systematic benchmarking of BLYP, TPSS, B97, ωB97X, B3LYP, M062X, PW6B95, B2PLYP, and PWPB95 functionals with D3BJ dispersion correction alongside def2-SVP, def2-TZVP, and def2-QZVP basis sets. The RI, RIJK, and RIJCOSX approximations were used for selected functionals. It was found that the B3LYP/def2-TZVP and RIJK RI-B2PLYP/def2-QZVP methods delivered the best combination of accuracy and computational efficiency, making them well-suited for efficient modeling of nonbonded interactions responsible for molecular recognition of protein kinase inhibitors in their targets.

Adaptive and Ultrahigh-Affinity Recognition in Water by Sulfated Conjugated Corral[5]arene

The pursuit of synthetic receptors with high binding affinities has long been a central focus in supramolecular chemistry, driven by their significant practical relevance in various fields. Despite the numerous synthetic receptors that have been developed, most exhibit binding affinities in the micromolar range or lower. Only a few exceptional receptors achieve binding affinities exceeding 109  M-1 , and their substrate scopes remain rather limited. In this context, we introduce SC[5]A, a conjugated corral-shaped macrocycle functionalized with ten sulfate groups. Owing to its deep one-dimensional confined hydrophobic cavity and multiple sulfate groups, SC[5]A displays an extraordinarily high binding strength of up to 1011  M-1 towards several size-matched, rod-shaped organic dications in water. Besides, its conformation exhibits good adaptability, allowing it to encapsulate a wide range of other guests with diverse molecular sizes, shapes, and functionalities, exhibiting relatively strong affinities (Ka =106 -108  M-1 ). Additionally, we've explored the preliminary application of SC[5]A in alleviating blood coagulation induced by hexadimethrine bromide in vitro and in vivo. Therefore, the combination of ultrahigh binding affinities (towards complementary guests) and adaptive recognition capability (towards a wide range of functional guests) of SC[5]A positions it as exceptionally valuable for numerous practical applications.

Recognition of atomic-level difference in porphyrin dyads for self-sorted supramolecular polymer growth

Porphyrin dyads (PDMs, where M = Zn and Cu) composed of diphenylporphyrin and tetraphenylporphyrin units, designated as DPDMs and TPDMs, respectively, exhibited remarkable differences in the molecular assemblies depending on the coordination metal ion. Furthermore, TPDMs showed self-sorting behavior during the formation of supramolecular assemblies through the recognition of atomic-level difference.

Precise Recognition in Water by an Endo-Functionalized Cavity: Tuning the Complementarity of Binding Sites

Precise binding towards structurally similar substrates is a common feature of biomolecular recognition. However, achieving such selectivity-especially in distinguishing subtle differences in substrates-with synthetic hosts can be quite challenging. Herein, we report a novel design strategy involving the combination of different rigid skeletons to adjust the distance between recognition sites within the cavity, which allows for the highly selective recognition of hydrogen-bonding complementary substrates, such as 4-chromanone. X-ray single-crystal structures and density functional theory calculations confirmed that the distance of endo-functionalized groups within the rigid cavity is crucial for achieving high binding selectivity through hydrogen bonding. The thermodynamic data and molecular dynamics simulations revealed a significant influence of the hydrophobic cavity on the binding affinity. The new receptor possesses both high selectivity and high affinity, which provide valuable insights for the design of customized receptors.

The temperature-dependence of host-guest binding thermodynamics: experimental and simulation studies

The thermodynamic parameters of host-guest binding can be used to describe, understand, and predict molecular recognition events in aqueous systems. However, interpreting binding thermodynamics remains challenging, even for these relatively simple molecules, as they are determined by both direct and solvent-mediated host-guest interactions. In this contribution, we focus on the contributions of water to binding by studying binding thermodynamics, both experimentally and computationally, for a series of nearly rigid, electrically neutral host-guest systems and report the temperature-dependent thermodynamic binding contributions ΔGb(T), ΔHb(T), ΔSb(T), and ΔCp,b. Combining isothermal titration calorimetry (ITC) measurements with molecular dynamics (MD) simulations, we provide insight into the binding forces at play for the macrocyclic hosts cucurbit[n]uril (CBn, n = 7-8) and β-cyclodextrin (β-CD) with a range of guest molecules. We find consistently negative changes in heat capacity on binding (ΔCp,b) for all systems studied herein - as well as for literature host-guest systems - indicating increased enthalpic driving forces for binding at higher temperatures. We ascribe these trends to solvation effects, as the solvent properties of water deteriorate as temperature rises. Unlike the entropic and enthalpic contributions to binding, with their differing signs and magnitudes for the classical and non-classical hydrophobic effect, heat capacity changes appear to be a unifying and more general feature of host-guest complex formation in water. This work has implications for understanding protein-ligand interactions and other complex systems in aqueous environments.

Iterative Knowledge-Based Scoring Function for Protein-Ligand Interactions by Considering Binding Affinity Information

Scoring functions for protein-ligand interactions play a critical role in structure-based drug design. Owing to the good balance between general applicability and computational efficiency, knowledge-based scoring functions have obtained significant advancements and achieved many successes. Nevertheless, knowledge-based scoring functions face a challenge in utilizing the experimental affinity data and thus may not perform well in binding affinity prediction. Addressing the challenge, we have proposed an improved version of the iterative knowledge-based scoring function ITScore by considering binding affinity information, which is referred to as ITScoreAff, based on a large training set of 6216 protein-ligand complexes with both structures and affinity data. ITScoreAff was extensively evaluated and compared with ITScore, 33 traditional, and 6 machine learning scoring functions in terms of docking power, ranking power, and screening power on the independent CASF-2016 benchmark. It was shown that ITScoreAff obtained an overall better performance than the other 40 scoring functions and gave an average success rate of 85.3% in docking power, a correlation coefficient of 0.723 in scoring power, and an average rank correlation coefficient of 0.668 in ranking power. In addition, ITScoreAff also achieved the overall best screening power when the top 10% of the ranked database were considered. These results demonstrated the robustness of ITScoreAff and its improvement over existing scoring functions.

Thermally-Induced Isomerization of Prenucleation Clusters During the Prenucleation Stage of CdTe Quantum Dots

The evolution of prenucleation clusters in the prenucleation stage of colloidal semiconductor quantum dots (QDs) has remained unexplored. With CdTe as a model system, we show that substances form and isomerize prior to the nucleation and growth of QDs. Called precursor compounds (PCs), the prenucleation clusters are relatively optically transparent and can transform to absorbing magic-size clusters (MSCs). When a prenucleation-stage sample at 25, 45, or 80 °C is dispersed in a mixture of cyclohexane (CH) and octylamine (OTA) at room temperature, either MSC-371, MSC-417, or MSC-448 evolves with absorption peaking at 371, 417, or 448 nm, respectively. We propose that PC-371 forms at 25 °C, and isomerizes to PC-417 at 45 °C and to PC-448 at 80 °C. The PCs and MSCs are quasi isomers. Relatively large and small amounts of OTA favor PC-371 and PC-448 in dispersion, respectively. The present findings suggest the existence of PC-to-PC isomerization in the QD prenucleation stage.

Aromatic interactions with heterocycles in water

Conformationally well-defined supramolecular complexes that can be studied in different solvents provide a platform for separating and quantifying free energy contributions due to functional group interactions and desolvation. Here 1:1 complexes formed between four different calix[4]pyrrole receptors and eleven different pyridine N-oxide guests have been used to dissect the factors that govern aromatic interactions with heterocycles in water and in chloroform solution. 1H NMR spectroscopy shows that the three-dimensional structures of the complexes are fixed by four H-bonding interactions between the pyrrole donors at the bottom of the receptor and the N-oxide acceptor on the guest, locking the geometrical arrangement of interacting functional groups in the binding pocket at the other end of the receptor. An aromatic heterocycle on the guest makes two stacking interactions and two edge-to-face interactions with the side walls of the receptor. Chemical double mutant cycles were used to measure the free energy contribution of these four aromatic interactions to the overall stability of the complex. In chloroform, the aromatic interactions measured with pyridine, pyrimidine, furan, thiophene and thiazole are similar to the interactions with a phenyl group, but the effect of introducing a heteroatom depends on where it sits with respect to the aromatic side-walls of the cavity. A nitrogen lone pair directed into a π-face of the side-walls of the binding site leads to repulsive interactions of up to 8 kJ mol-1. In water, the heterocycle aromatic interactions are all significantly more favourable (by up to 12 kJ mol-1). For the non-polar heterocycles, furan and thiophene, the increase in interaction energy correlates directly with hydrophobicity, as measured by the free energy of transfer of the heterocycle from n-hexadecane into water (ΔG°(water-hex)). For the heterocycles with polar nitrogen H-bond acceptors, water can access cracks in the walls of the receptor binding site to solvate the edges of the heterocycles without significantly affecting the geometry of the aromatic interactions, and these nitrogen-water H-bonds stabilise the complexes by about 15 kJ mol-1. The results highlight the complexity of the solvation processes that govern molecular recognition in water.

Conformational equilibria and interaction preference in the complex of isoprene-maleic anhydride

The rotational spectrum of the isoprene-maleic anhydride complex has been investigated by pulsed jet Fourier transform microwave spectroscopy and interpreted with complementary quantum chemical calculations. Theoretical predictions have yielded four plausible isomers, all residing within an energy window of 12 kJ mol-1. However, two distinct isomers characterized by a π-π stacked configuration have been experimentally observed in pulsed jets, which have differed in the orientation of isoprene over maleic anhydride. The relative population ratio of the two detected isomers has been estimated to be NI/NII ≈ 3/1 from rigorous measurements of the relative intensity on a set of μc-type transitions. Remarkably, this study underscores the pivotal role played by the interaction between the CC bonding orbital (π) of isoprene and the CC antibonding orbital (π*) of maleic anhydride in stabilizing the target complex.

Multivalency-enhanced enzyme inhibitors with biomolecule-responsive activity

This work reports a polymeric adenosine triphosphate (ATP)-responsive trypsin inhibitor. The polymeric inhibitor was rationally obtained by optimizing the benzamidine and phenylboronic acid monomers, which could synergistically bind with the phosphate and ribose groups in ATP. The ATP-responsive trypsin activity shows its potential as a therapeutic drug for cancer-targeting cell inhibition.

Combinatorial mixtures of organic solutes for improved liquid/liquid extraction of ions

Biological systems routinely extract and organize ions in complex yet highly ordered and active systems. Much of this function is attributed to proteins, although recent evidence indicates aggregates of lipids are also capable of molecular recognition. Here we tested the hypothesis that combinatorial mixtures of organic solutes might lead to enhanced liquid/liquid extraction. We started with liquid oleic acid as an organic phase extracting copper ions from water and added a library of additives. By using Bayesian optimization to autonomously direct the combinatorial formulation, we discovered mixtures that enhanced the extraction performance. The main additive that improved the system was octylphosphonic acid. Interestingly, the optimal mixture has a significant improvement compared to this additive alone. This suggests that the combinations of organic solutes are better than using pure components in liquid/liquid extraction. Furthermore, we found that precipitation occurs in the samples showing better extraction efficiency, which has interesting material properties and potential for new types of supramolecular biosensors.

Intermolecular n→π* Interactions in Supramolecular Chemistry and Catalysis

The n→π* interactions describing attractive force between lone pairs (lps) of nucleophile and carbonyl or polarized unsaturated bonds have recently attracted growing attentions in various disciplines. So far, such non-covalent driving force are mainly concentrated to intramolecular systems. Intermolecular n→π* interactions in principle could produce fascinated supramolecular systems or facilitate organic reactions, however, they remain largely underexplored due to the very weak energy of individual interaction. This review attempts to give an overview of the challenging intermolecular n→π* interactions, much efforts emphasize the supramolecular systems, catalytic processes and spectroscopic measurements.

Nonmonotonic Modulation of the Protein-Ligand Recognition Event by Inert Crowders

The ubiquitous event of a protein recognizing small molecules or ligands at its native binding site is crucial for initiating major biological processes. However, how a crowded environment, as is typically represented by a cellular interior, would modulate the protein-ligand search process is largely debated. Excluded volume-based theory suggests that the presence of an inert crowder would reinforce a steady stabilization and enhancement of the protein-ligand recognition process. Here, we counter this long-held perspective via the molecular dynamics simulation and Markov state model of the protein-ligand recognition event in the presence of inert crowders. Specifically, we demonstrate that, depending on concentration, even purely inert crowders can exert a nonmonotonic effect via either stabilizing or destabilizing the protein-ligand binding event. Analysis of the kinetic network of binding pathways reveals that the crowders would either modulate precedent non-native on-pathway intermediates or would devise additional ones in a multistate recognition event across a wide range of concentrations. As an important insight, crowders gradually shift the relative transitional preference of these intermediates toward a native-bound state, with ligand residence time at the binding pocket dictating the trend of nonmonotonic concentration dependence by simple inert crowders.

The Copper(II)-Thiodiacetate (tda) Chelate as Efficient Receptor of N9-(2-Hydroxyethyl)Adenine (9heade): Synthesis, Molecular and Crystal Structures, Physical Properties and DFT Calculations of [Cu(tda)(9heade)(H2O)]·2H2O

Considering that Cu(tda) chelate (tda: dithioacetate) is a receptor for adenine and related 6-aminopurines, this study reports on the synthesis, molecular and crystal structures, thermal stability, spectral properties and DFT calculations related to [Cu(tda)(9heade)(H2O)]·2H2O (1) [9heade: N9-(2-hydroxyethyl)adenine]. Concerning the molecular recognition of (metal chelate)-(adenine synthetic nucleoside), 1 represents an unprecedented metal binding pattern (MBP) for 9heade. However, unprecedentedly, the Cu(tda)-9heade molecular recognition in 1 is essentially featured in the Cu-N1(9heade) bond, without any N6-H⋯O(carboxyl tda) interligand interaction. Nevertheless, N1 being the most basic donor for N9-substituted adenines, this Cu-N1 bond is now assisted by an O2-water-mediated interaction (N6-H⋯O2 and O2⋯Cu weak contact). Also, in the crystal packing, the O-H(ol) of 9heade interacts with its own adenine moiety as a result of an O3-water-mediated interaction (O(ol)-H⋯O3 plus O3-H36⋯π(adenine moiety)). Both water-mediated interactions seem to be responsible for serious alterations in the physical properties of crystalline or grounded samples. Density functional theory calculations were used to evaluate the interactions energetically. Moreover, the quantum theory of atoms-in-molecules (QTAIM), in combination with the noncovalent interaction plot (NCIPlot), was used to analyze the interactions and rationalize the existence and relative importance of hydrogen bonding, chalcogen bonding and π-stacking interactions. The novelty of this work resides in the discovery of a novel binding mode for N9-(2-hydroxyethyl)adenine. Moreover, the investigation of the important role of water in the solid state of 1 is also relevant, along with the chalcogen bonding interactions demonstrated by the density functional theory (DFT) study.

Soft corrugated channel with synergistic exclusive discrimination gating for CO2 recognition in gas mixture

Developing artificial porous systems with high molecular recognition performance is critical but very challenging to achieve selective uptake of a particular component from a mixture of many similar species, regardless of the size and affinity of these competing species. A porous platform that integrates multiple recognition mechanisms working cooperatively for highly efficient guest identification is desired. Here, we designed a flexible porous coordination polymer (PCP) and realised a corrugated channel system that cooperatively responds to only target gas molecules by taking advantage of its stereochemical shape, location of binding sites, and structural softness. The binding sites and structural deformation act synergistically, exhibiting exclusive discrimination gating (EDG) effect for selective gate-opening adsorption of CO₂ over nine similar gas molecules, including N₂, CH₄, CO, O₂, H₂, Ar, C₂H₆, and even higher-affinity gases such as C₂H₂ and C₂H₄. Combining in-situ crystallographic experiments with theoretical studies, it is clear that this unparalleled ability to decipher the CO₂ molecule is achieved through the coordination of framework dynamics, guest diffusion, and interaction energetics. Furthermore, the gas co-adsorption and breakthrough separation performance render the obtained PCP an efficient adsorbent for CO₂ capture from various gas mixtures.

Preferred microenvironments of halogen bonds and hydrogen bonds revealed using statistics and QM/MM calculation studies

Hydrogen bonds (HBs) and halogen bonds (XBs) are two essential non-covalent interactions for molecular recognition and drug design. As proteins are heterogeneous in structure, the microenvironments of protein structures should have effects on the formation of HBs and XBs with ligands. However, there are no systematic studies reported on this effect to date. For quantitatively describing protein microenvironments, we defined the local hydrophobicities (LHs) and local dielectric constants (LDCs) in this study. With the defined parameters, we conducted an elaborate database survey on the basis of 22 011 ligand-protein structures to explore the microenvironmental preference of HBs (91 966 in total) and XBs (1436 in total). The statistics show that XBs prefer hydrophobic microenvironments compared to HBs. The polar residues like ASP are more likely to form HBs with ligands, while nonpolar residues such as PHE and MET prefer XBs. Both the LHs and LDCs (10.69 ± 4.36 for HBs; 8.86 ± 4.00 for XBs) demonstrate that XBs are prone to hydrophobic microenvironments compared with HBs with significant differences (p < 0.001), indicating that evaluating their strengths in the corresponding environments should be necessary. Quantum Mechanics-Molecular Mechanics (QM/MM) calculations reveal that in comparison with vacuum environments, the interaction energies of HBs and XBs are decreased to varying degrees given different microenvironments. In addition, the strengths of HBs are impaired more than those of XBs when the local dielectric constant's difference between the XB microenvironments and the HB microenvironments is large.

Therapeutic disruption of RAD52-ssDNA complexation via novel drug-like inhibitors

RAD52 protein is a coveted target for anticancer drug discovery. Similar to poly-ADP-ribose polymerase (PARP) inhibitors, pharmacological inhibition of RAD52 is synthetically lethal with defects in genome caretakers BRCA1 and BRCA2 (∼25% of breast and ovarian cancers). Emerging structure activity relationships for RAD52 are complex, making it challenging to transform previously identified disruptors of the RAD52-ssDNA interaction into drug-like leads using traditional medicinal chemistry approaches. Using pharmacophoric informatics on the RAD52 complexation by epigallocatechin (EGC), and the Enamine in silico REAL database, we identified six distinct chemical scaffolds that occupy the same physical space on RAD52 as EGC. All six were RAD52 inhibitors (IC50 ∼23-1200 μM) with two of the compounds (Z56 and Z99) selectively killing BRCA-mutant cells and inhibiting cellular activities of RAD52 at micromolar inhibitor concentrations. While Z56 had no effect on the ssDNA-binding protein RPA and was toxic to BRCA-mutant cells only, Z99 inhibited both proteins and displayed toxicity towards BRCA-complemented cells. Optimization of the Z99 scaffold resulted in a set of more powerful and selective inhibitors (IC50 ∼1.3-8 μM), which were only toxic to BRCA-mutant cells. RAD52 complexation by Z56, Z99 and its more specific derivatives provide a roadmap for next generation of cancer therapeutics.

Cage-Based Metal-Organic Framework as an Artificial Energy Receptor for Highly Sensitive Detection of Serotonin

Artificial synthetic receptors toward functional biomolecules can serve as models to provide insights into understanding the high binding affinity of biological receptors to biomolecules for revealing their law of life activities. The exploration of serotonin receptors, which can guide drug design or count as diagnostic reagents for patients with carcinoid tumors, is of great value for clinical medicine but is highly challenging due to complex biological analysis. Herein, we report a cage-based metal-organic framework (NKU-67-Eu) as an artificial chemical receptor with well-matched energy levels for serotonin. The energy transfer back from the analyte to the framework enables NKU-67-Eu to recognize serotonin with excellent neurotransmitter selectivity in human plasma and an ultra-low limit of detection of 36 nM. Point-of-care visual detection is further realized by the colorimetry change of NKU-67-Eu toward serotonin with a smartphone camera.

Pillar[6]MaxQ: A Potent Supramolecular Host for In Vivo Sequestration of Methamphetamine and Fentanyl

Pillar[6]MaxQ (P6AS) functions as an in vivo sequestration agent for methamphetamine and fentanyl. We use 1H NMR, isothermal titration calorimetry, and molecular modelling to deduce the geometry and strength of the P6AS•drug complexes. P6AS forms tight complexes with fentanyl (Kd=9.8 nM), PCP (17.1 nM), MDMA (25.5 nM), mephedrone (52.4 nM), and methamphetamine (101 nM). P6AS has good in vitro biocompatibility according to MTS metabolic, Adenylate Kinase cell death, and hERG ion channel inhibition assays, and the Ames fluctuation test. The no observed adverse effect level for P6AS is 45 mg/kg. The hyperlocomotion of mice treated with methamphetamine (0.5 mg/kg) can be ameliorated by treatment with P6AS (35.7 mg/kg) 5-minutes later, whereas the hyperlocomotion of mice treated with fentanyl (0.1 mg/kg) can be controlled by treatment with P6AS (5 mg/kg) up to 15-minutes later. P6AS has significant potential for development as a broad spectrum in vivo sequestration agent.

Porous Organic Cages

Porous organic cages (POCs) are a relatively new class of low-density crystalline materials that have emerged as a versatile platform for investigating molecular recognition, gas storage and separation, and proton conduction, with potential applications in the fields of porous liquids, highly permeable membranes, heterogeneous catalysis, and microreactors. In common with highly extended porous structures, such as metal-organic frameworks (MOFs), covalent organic frameworks (COFs), and porous organic polymers (POPs), POCs possess all of the advantages of highly specific surface areas, porosities, open pore channels, and tunable structures. In addition, they have discrete molecular structures and exhibit good to excellent solubilities in common solvents, enabling their solution dispersibility and processability─properties that are not readily available in the case of the well-established, insoluble, extended porous frameworks. Here, we present a critical review summarizing in detail recent progress and breakthroughs─especially during the past five years─of all the POCs while taking a close look at their strategic design, precise synthesis, including both irreversible bond-forming chemistry and dynamic covalent chemistry, advanced characterization, and diverse applications. We highlight representative POC examples in an attempt to gain some understanding of their structure-function relationships. We also discuss future challenges and opportunities in the design, synthesis, characterization, and application of POCs. We anticipate that this review will be useful to researchers working in this field when it comes to designing and developing new POCs with desired functions.

"Magic Chloro": Profound Effects of the Chlorine Atom in Drug Discovery

Chlorine is one of the most common atoms present in small-molecule drugs beyond carbon, hydrogen, nitrogen, and oxygen. There are currently more than 250 FDA-approved chlorine-containing drugs, yet the beneficial effect of the chloro substituent has not yet been reviewed. The seemingly simple substitution of a hydrogen atom (R = H) with a chlorine atom (R = Cl) can result in remarkable improvements in potency of up to 100,000-fold and can lead to profound effects on pharmacokinetic parameters including clearance, half-life, and drug exposure in vivo. Following the literature terminology of the "magic methyl effect" in drugs, the term "magic chloro effect" has been coined herein. Although reports of 500-fold or 1000-fold potency improvements are often serendipitous discoveries that can be considered "magical" rather than planned, hypotheses made to explain the magic chloro effect can lead to lessons that accelerate the cycle of drug discovery.

The pyridazine heterocycle in molecular recognition and drug discovery

The pyridazine ring is endowed with unique physicochemical properties, characterized by weak basicity, a high dipole moment that subtends π-π stacking interactions and robust, dual hydrogen-bonding capacity that can be of importance in drug-target interactions. These properties contribute to unique applications in molecular recognition while the inherent polarity, low cytochrome P450 inhibitory effects and potential to reduce interaction of a molecule with the cardiac hERG potassium channel add additional value in drug discovery and development. The recent approvals of the gonadotropin-releasing hormone receptor antagonist relugolix (24) and the allosteric tyrosine kinase 2 inhibitor deucravacitinib (25) represent the first examples of FDA-approved drugs that incorporate a pyridazine ring. In this review, the properties of the pyridazine ring are summarized in comparison to the other azines and its potential in drug discovery is illustrated through vignettes that explore applications that take advantage of the inherent physicochemical properties as an approach to solving challenges associated with candidate optimization.

Graphical Abstract

Hydrogen bond interactions between thioethers and amides: A joint rotational spectroscopic and theoretical study of the formamide⋯dimethyl sulfide adduct

The rotational spectrum of the binary adduct of formamide (HCONH₂) with dimethyl sulfide (DMS) has been investigated employing cavity-based Fourier transform microwave spectroscopy combined with theoretical computations. Experimentally, only one isomer of the adduct was unambiguously observed and assigned according to the theoretically predicted spectroscopic parameters, and its rotational spectrum displays the hyperfine splittings associated with the ¹⁴N nuclear quadrupole coupling effect. The observed isomer exhibits C_s symmetry, such that the ∠CSC angle of the DMS subunit is bisected by the ab-plane of the HCONH₂ moiety. The two moieties in the detected isomer are connected via one primary NH···S and two secondary CH···O hydrogen bonds. Quantum theory of atoms in molecules (QTAIM), non-covalent interaction (NCI), natural bond orbital (NBO) and symmetry-adapted perturbation theory (SAPT) approaches were utilized for characterizing the intermolecular interactions occurring in the titled adduct. Additionally, the adduct of HCONH₂ with dimethyl ether (DME) was also theoretically investigated to compare the difference in structure and energy characteristics between the NH···S and NH···O hydrogen bonds.

Allosteric Regulation of Aptamer Affinity through Mechano-Chemical Coupling

The capacity to precisely modulate aptamer affinity is important for a wide variety of applications. However, most such engineering strategies entail laborious trial-and-error testing or require prior knowledge of an aptamer's structure and ligand-binding domain. We describe here a simple and generalizable strategy for allosteric modulation of aptamer affinity by employing a double-stranded molecular clamp that destabilizes aptamer secondary structure through mechanical tension. We demonstrate the effectiveness of the approach with a thrombin-binding aptamer and show that we can alter its affinity by as much as 65-fold. We also show that this modulation can be rendered reversible by introducing a restriction enzyme cleavage site into the molecular clamp domain and describe a design strategy for achieving even more finely-tuned affinity modulation. This strategy requires no prior knowledge of the aptamer's structure and binding mechanism and should thus be generalizable across aptamers.

Aryl-Extended and Super Aryl-Extended Calix[4]pyrroles: Design, Synthesis, and Applications

ConspectusProteins exhibit high-binding affinity and selectivity, as well as remarkable catalytic performance. Their binding pockets are hydrophobic but also contain polar and charged groups to contribute to the binding of polar organic molecules in aqueous solution. In the past decades, the synthesis of biomimetic receptors featuring sizable aromatic cavities equipped with converging polar groups has received considerable attention. "Temple" cages, naphthotubes, and aryl-extended calix[4]pyrroles are privileged examples of synthetic scaffolds displaying functionalized hydrophobic cavities capable of binding polar substrates. In particular, calix[4]pyrroles are macrocycles containing four pyrrole rings connected through their pyrrolic 2- and 5-positions by tetra-substituted sp³ carbon atoms (meso-substituents). In 1996, Sessler introduced the meso-octamethyl calix[4]pyrrole as an outstanding receptor for anion binding. Independently, Sessler and Floriani also showed that the introduction of aryl substituents in the meso-positions produced aryl-extended calix[4]pyrroles as a mixture of configurational isomers. In addition, aryl-extended calix[4]pyrroles bearing two and four meso-aryl substituents (walls) were reported. The cone conformation of "two-wall" αα-aryl-extended calix[4]pyrroles features an aromatic cleft with a polar binding site defined by four converging pyrrole NHs. On the other hand, "four-wall" αααα-calix[4]pyrrole isomers possess a deep polar aromatic cavity closed at one end by the converging pyrrole NHs. Because of their functionalized interior, aryl-extended calix[4]pyrroles are capable of binding anions, ion-pairs, and electron-rich neutral molecules in organic solvents. However, in water, they are restricted to the inclusion of neutral polar guests.Since the early 2000s, our research group has been involved in the design and synthesis of "two-wall" and "four-wall" aryl-extended calix[4]pyrroles and their derivatives, such as aryl-extended calix[4]pyrrole cavitands and super aryl-extended calix[4]pyrroles. In this Account, we mainly summarize our own results on the binding of charged and neutral polar guests with these macrocyclic receptors in organic solvents and in water. We also describe the applications of calix[4]pyrrole derivatives in the sensing of creatinine, the facilitated transmembrane transport of anions and amino acids, and the monofunctionalization of bis-isonitriles. Moreover, we explain the use of calix[4]pyrrole receptors as model systems for the quantification of anion-π interactions and the hydrophobic effect. Finally, we discuss the self-assembly of dimeric capsules and unimolecular metallo-cages based on calix[4]pyrrole scaffolds. We comment on their binding properties, as well as on those of bis-calix[4]pyrroles having a fully covalent structure.In molecular recognition, aryl-extended calix[4]pyrroles and their derivatives are considered valuable receptors owing to their ability to interact with a wide variety of electron-rich, neutral, and charged guests. Calix[4]pyrrole scaffolds have also been applied in the development of molecular sensors, ionophores, transmembrane carriers, supramolecular protecting groups and molecular containers modulating chemical reactivity, among others. We believe that the design of new calix[4]pyrrole receptors and the investigation of their binding properties may lead to promising applications in many research areas, such as supramolecular catalysis, chemical biology and materials science. We hope that this Account will serve to spread the knowledge of the supramolecular chemistry of calix[4]pyrroles among supramolecular and nonsupramolecular chemists alike.

Binding propensity and selectivity of cationic, anionic, and neutral guests with model hydrophobic hosts: A first principles study

Computations play a critical role in deciphering the nature of host-guest interactions both at qualitative and quantitative levels. Reliable quantum chemical computations were employed to assess the nature, binding strength, and selectivity of ionic, and neutral guests with benzenoid hosts. Optimized complex structures reveal that alkali and ammonium ions are found to be in the hydrophobic cavity, while halide ions are outside, while both complexes elicit substantial binding energy. The origin of the selectivity of host toward the guest has been traced to the interaction and deformation energies, and the nature of associated interactions is quantified using energy decomposition and the Quantum Theory of Atoms in Molecules analyses. While the larger hosts lead to loosely bound complexes, as assessed by the longer intermolecular distances, the binding strengths are proportional to the size of the host systems. The binding of cationic complexes is electrostatic or polarization driven while exchange term dominates the anionic complexes. In contrast, dispersion contribution is a key in neutral complexes and plays a pivotal role in stabilizing the polyatomic complexes.

Computationally rational design of metal-involving halogen bonds with π-covalency: Structures and bonding analysis

Traditional π-covalent interactions have been proved in the non-metal halogen bond adducts formed by chloride and halogenated triphenylamine-based radical cations. In this study, we have rationally designed two metal-involving halogen bond adducts with π-covalency property, such as [L1-Pd···I-PTZ]⁺ (i.e., 1) and [L2-Pd···I-PTZ]⁺ (i.e., 2), in which the square-planar palladium complexes serve as halogen bond acceptor and 3,7-diiodo-10H-phenothiazine radical cation (i.e., [I-PTZ]^•+ ) acts as halogen bond donor. Noncovalent interaction analysis and quantum theory of atoms in molecules analysis revealed that there are notable halogen bond interactions along the Pd···I direction without genuine chemical bond formed in both designed adducts. Energy decomposition analysis together with natural orbital for chemical valence calculations were performed to gain insight into their bonding nature, which demonstrated the presence of remarkable π-covalent interactions and σ-covalent interactions in both 1 and 2. We therefore proposed a new strategy for building the metal-involving halogen bonds with π-covalency property, which will help the further development of new types of halogen bonds.

ChemFlow─From 2D Chemical Libraries to Protein-Ligand Binding Free Energies

The accurate prediction of protein-ligand binding affinities is a fundamental problem for the rational design of new drug entities. Current computational approaches are either too expensive or inaccurate to be effectively used in virtual high-throughput screening campaigns. In addition, the most sophisticated methods, e.g., those based on configurational sampling by molecular dynamics, require significant pre- and postprocessing to provide a final ranking, which hinders straightforward applications by nonexpert users. We present a novel computational platform named ChemFlow to bridge the gap between 2D chemical libraries and estimated protein-ligand binding affinities. The software is designed to prepare a library of compounds provided in SMILES or SDF format, dock them into the protein binding site, and rescore the poses by simplified free energy calculations. Using a data set of 626 protein-ligand complexes and GPU computing, we demonstrate that ChemFlow provides relative binding free energies with an RMSE < 2 kcal/mol at a rate of 1000 ligands per day on a midsize computer cluster. The software is publicly available at https://github.com/IFMlab/ChemFlow.

(2-Hydroxy-3-Methoxybenzylidene)thiazolo[3,2-a]pyrimidines: Synthesis, Self-Assembly in the Crystalline Phase and Cytotoxic Activity

A series of new 2-hydroxy-3-methoxybenzylidenethiazolo[3,2-a]pyrimidines with different aryl substituents at the 5 position are synthesized and characterized by ¹H/ ¹³C NMR and IR-spectroscopy and mass-spectrometry, as well as single crystal X-ray diffraction (SCXRD). It was demonstrated that the type of hydrogen bonding can play a key role in the chiral discrimination of these compounds in the crystalline phase. The hydrogen bond of the O-H...N type leads to 1D supramolecular heterochiral chains or conglomerate crystallization in the case of the formation of homochiral chains. The hydrogen bond of O-H...O type gave racemic dimers, which are packed into 2D supramolecular layers with a parallel or angular dimers arrangement. Halogen bonding of the N...Br or O...Br type brings a new motif into supramolecular self-assembly in the crystalline phase: the formation of 1D supramolecular homochiral chains instead 2D supramolecular layers. The study of cytotoxicity against various tumor cells in vitro was carried out. It was found that 2-hydroxy-3-methoxybenzylidenethiazolo[3,2-a]pyrimidines with 3-nitrophenyl substituent at C5 carbon atom demonstrated a high efficiency against M-HeLa (cervical adenocarcinoma) and low cytotoxicity against normal liver cells.

The Story of the Little Blue Box: A Tribute to Siegfried Hünig

The tetracationic cyclophane, cyclobis(paraquat-p-phenylene), also known as the little blue box, constitutes a modular receptor that has facilitated the discovery of many host-guest complexes and mechanically interlocked molecules during the past 35 years. Its versatility in binding small π-donors in its tetracationic state, as well as forming trisradical tricationic complexes with viologen radical cations in its doubly reduced bisradical dicationic state, renders it valuable for the construction of various stimuli-responsive materials. Since the first reports in 1988, the little blue box has been featured in over 500 publications in the literature. All this research activity would not have been possible without the seminal contributions carried out by Siegfried Hünig, who not only pioneered the syntheses of viologen-containing cyclophanes, but also revealed their rich redox chemistry in addition to their ability to undergo intramolecular π-dimerization. This Review describes how his pioneering research led to the design and synthesis of the little blue box, and how this redox-active host evolved into the key component of molecular shuttles, switches, and machines.

Evaluation of acyllysine isostere interactions with the aromatic pocket of the AF9 YEATS domain

Amide-π interactions, in which an amide interacts with an aromatic group, are ubiquitous in biology, yet remain understudied relative to other noncovalent interactions. Recently, we demonstrated that an electrostatically tunable amide-π interaction is key to recognition of histone acyllysine by the AF9 YEATS domain, a reader protein which has emerged as a therapeutic target due to its dysregulation in cancer. Amide isosteres are commonly employed in drug discovery, often to prevent degradation by proteases, and have proven valuable in achieving selectivity when targeting epigenetic proteins. However, like amide-π interactions, interactions of amide isosteres with aromatic rings have not been thoroughly studied despite widespread use. Herein, we evaluate the recognition of a series of amide isosteres by the AF9 YEATS domain using genetic code expansion to evaluate the amide isostere-π interaction. We show that compared to the amide-π interaction with the native ligand, each isostere exhibits similar electrostatic tunability with an aromatic residue in the binding pocket, demonstrating that the isosteres maintain similar interactions with the aromatic residue. We identify a urea-containing ligand that binds with enhanced affinity for the AF9 YEATS domain, offering a promising starting point for inhibitor development. Furthermore, we demonstrate that carbamate and urea isosteres of crotonyllysine are resistant to enzymatic removal by SIRT1, a protein that cleaves acyl post-translational modifications, further indicating the potential of amide isosteres in YEATS domain inhibitor development. These results also provide experimental precedent for interactions of these common drug discovery moieties with aromatic rings that can inform computational methods.

Recognition Mechanisms between a Nanobody and Disordered Epitopes of the Human Prion Protein: An Integrative Molecular Dynamics Study

Immunotherapy using antibodies to target the aggregation of flexible proteins holds promise for therapeutic interventions in neurodegenerative diseases caused by protein misfolding. Prions or PrP^Sc, the causal agents of transmissible spongiform encephalopathies (TSE), represent a model target for immunotherapies as TSE are prototypical protein misfolding diseases. The X-ray crystal structure of the wild-type (WT) human prion protein (HuPrP) bound to a camelid antibody fragment, denoted as Nanobody 484 (Nb484), has been previously solved. Nb484 was found to inhibit prion aggregation in vitro through a unique mechanism of structural stabilization of two disordered epitopes, that is, the palindromic motif (residues 113-120) and the β2-α2 loop region (residues 164-185). The study of the structural basis for antibody recognition of flexible proteins requires appropriate sampling techniques for the identification of conformational states occurring in disordered epitopes. To elucidate the Nb484-HuPrP recognition mechanisms, here we applied molecular dynamics (MD) simulations complemented with available NMR and X-ray crystallography data collected on the WT HuPrP to describe the conformational spaces occurring on HuPrP prior to Nb484 binding. We observe the experimentally determined binding competent conformations within the ensembles of pre-existing conformational states in solution before binding. We also described the Nb484 recognition mechanisms in two HuPrP carrying a polymorphism (E219K) and a TSE-causing mutation (V210I). Our hybrid approaches allow the identification of dynamic conformational landscapes existing on HuPrP and highly characterized by molecular disorder to identify physiologically relevant and druggable transitions.

Hierarchical Materials from High Information Content Macromolecular Building Blocks: Construction, Dynamic Interventions, and Prediction

Hierarchical materials that exhibit order over multiple length scales are ubiquitous in nature. Because hierarchy gives rise to unique properties and functions, many have sought inspiration from nature when designing and fabricating hierarchical matter. More and more, however, nature's own high-information content building blocks, proteins, peptides, and peptidomimetics, are being coopted to build hierarchy because the information that determines structure, function, and interfacial interactions can be readily encoded in these versatile macromolecules. Here, we take stock of recent progress in the rational design and characterization of hierarchical materials produced from high-information content blocks with a focus on stimuli-responsive and "smart" architectures. We also review advances in the use of computational simulations and data-driven predictions to shed light on how the side chain chemistry and conformational flexibility of macromolecular blocks drive the emergence of order and the acquisition of hierarchy and also on how ionic, solvent, and surface effects influence the outcomes of assembly. Continued progress in the above areas will ultimately usher in an era where an understanding of designed interactions, surface effects, and solution conditions can be harnessed to achieve predictive materials synthesis across scale and drive emergent phenomena in the self-assembly and reconfiguration of high-information content building blocks.

Rapid Access to Chiral and Tripodal Cavitands from β-Pinene

We report Pd-catalyzed cyclotrimerization of (+)-α-bromoenone, obtained from monoterpene β-pinene, into an enantiopure cyclotrimer. This C₃ symmetric compound has three bicyclo[3.1.1]heptane rings fused to its central benzene with each ring carrying a carbonyl group. The cyclotrimer undergoes diastereoselective threefold alkynylation with the lithium salts of five terminal alkynes (41-63 %, de=4-83 %). The addition enabled a rapid synthesis of a small library of novel chiral cavitands that, in shape, resemble a tripod stand. These molecular tripods include a tris-bicycloannelated benzene head attached to three alkyne legs twisted in one direction to form a nonpolar cavity with polar groups as feet. Tripods with methylpyridinium and methylisoquinolinium legs, respectively, form inclusion complexes with anti-inflammatory and chiral drugs (R)/(S)-ibuprofen and (R)/(S)-naproxen. The mode of binding shows drug molecules docked in the cavity of the host through ion-ion, cation-π, and C-H-π contacts that, in addition of desolvation, give rise to complexes having millimolar to micromolar stability in water. Our findings open the door to creating a myriad of enantiopure tripods with tunable functions that, in the future, might give novel chemosensors, catalysts or sequestering agents.

Guest-adaptive molecular sensing in a dynamic 3D covalent organic framework

Molecular recognition is an attractive approach to designing sensitive and selective sensors for volatile organic compounds (VOCs). Although organic macrocycles and cages have been well-developed for recognising organics by their adaptive pockets in liquids, porous solids for gas detection require a deliberate design balancing adaptability and robustness. Here we report a dynamic 3D covalent organic framework (dynaCOF) constructed from an environmentally sensitive fluorophore that can undergo concerted and adaptive structural transitions upon adsorption of gas and vapours. The COF is capable of rapid and reliable detection of various VOCs, even for non-polar hydrocarbon gas under humid conditions. The adaptive guest inclusion amplifies the host-guest interactions and facilitates the differentiation of organic vapours by their polarity and sizes/shapes, and the covalently linked 3D interwoven networks ensure the robustness and coherency of the materials. The present result paves the way for multiplex fluorescence sensing of various VOCs with molecular-specific responses.

Impacts of noncovalent interactions involving sulfur atoms on protein stability, structure, folding, and bioactivity

This review discusses the various types of noncovalent interactions in which sulfur atoms participate and their effects on protein stability, structure, folding and bioactivity. Current approaches and recommendations for modelling these noncovalent interactions (in terms of both geometries and interaction energies) are highlighted.