Biosequestration of atmospheric CO2 and flue gas-containing CO2 by microalgae

Two-stage carbon sequestration by Haematococcus pluvialis: Integrated research from small-scale to pilot-scale cultivation and data quality monitoring

A novel two-stage carbon sequestration strategy (3 % and 10 % CO2) was developed and its feasibility was comprehensively demonstrated by multiple methods (pilot-scale cultivation, kinetics, economics and carbon fixation analysis). It was also a safe, efficient and low-cost harvesting strategy. At the end of the culture, astaxanthin production and content increased 2.3 and 2.2 times, respectively. Sedimentation rate (SR) was introduced for the first time to evaluate microalgae culture methods. The SR reached 82.2 % after 2 h of standing. Pilot-scale cultivation was achieved outdoors, with the optimal photobioreactor being a 40 L tubular photobioreactor (T-PBRs), which individually achieved 3.1 g/L and 2.3 % biomass and astaxanthin content. The maximum rate of carbon sequestration (227.9 mg/L/d) was observed in 40 L T-PBRs. The cost of producing 1 kg of astaxanthin-enriched Haematococcus pluvialis (H. pluvialis) was only 17.5 USD. This study brings new perspectives to carbon sequestration and the development of astaxanthin markets.

Photobioreactor systems for mitigating ammonia and carbon dioxide from a broiler house

This study investigated the effectiveness of photobioreactor (PBR) systems in reducing air pollutants emitted from broiler houses. It focused on two microalgae species and one cyanobacteria grown under different media conditions and investigated their ability to mitigate ammonia (NH3) and carbon dioxide (CO2) in the exhaust air of a broiler house. Ankistrodesmus sp. achieved the highest cell concentrations across all experiments, with maximum dry biomass concentration observed under Nitrogen-free Bold's Basal Medium (BBM-N) culture condition. Scenedesmus sp. showed the highest NH3 mitigation efficiency (52.3%) with BBM-N culture, while Synechococcaceae species exhibited the highest CO2 mitigation efficiency (70.8%) with DI-water culture condition. Operating costs for producing 1.0 g L-1day-1 of dry microalgal biomass ranged from 0.10 to 0.35 USD L-1day-1. The cost of removing 1 g of NH3 ranged from $3.53-7.16, while for CO2, it ranged from $0.04-0.59. The study also evaluated the economic feasibility of this approach, demonstrating significant cost savings in biomass and protein production. These findings highlight the potential of PBR systems as a sustainable solution for reducing air pollutants in broiler house environments.

Microbial electrosynthesis technology for CO2 mitigation, biomethane production, and ex-situ biogas upgrading

Currently, global annual CO2 emissions from fossil fuel consumption are extremely high, surpassing tens of billions of tons, yet our capacity to capture and utilize CO2 remains below a small fraction of the amount generated. Microbial electrosynthesis (MES) systems, an integration of microbial metabolism with electrochemistry, have emerged as a highly efficient and promising bio-based carbon-capture-and-utilization technology over other conventional techniques. MES is a unique technology for lowering the atmospheric CO2 as well as CO2 in the biogas, and also simultaneously convert them to renewable bioenergy, such as biomethane. As such, MES techniques could be applied for biogas upgrading to generate high purity biomethane, which has the potential to meet natural gas standards. This article offers a detailed overview and assessment of the latest advancements in MES for biomethane production and biogas upgrading, in terms of selecting optimal methane production pathways and associated electron transfer processes, different electrode materials and types, inoculum sources and microbial communities, ion-exchange membrane, externally applied energy level, operating temperature and pH, mode of operation, CO2 delivery method, selection of inorganic carbon source and its concentration, start-up time, and system pressure. It also highlights the current MES challenges associated with upscaling, design and configuration, long-term stability, energy demand, techno-economics, achieving net negative carbon emission, and other operational issues. Moreover, we provide a summary of current and future opportunities to integrate MES with other unique biosystems, such as methanotrophic bioreactors, and incorporate quorum sensing, 3D printing, and machine learning to further develop MES as a better biomethane-producer and biogas upgrading technique.

Microalgae-derived biolubricants: Challenges and opportunities

Lubricants are indispensable in the modern economy for controlling friction and wear across many industries. Traditional lubricants are derived from petroleum crude and can cause significant ecological impact if released into the environment. Microalgae have emerged as a potential alternative to petroleum crude for producing renewable and environmentally friendly biolubricants. This review systematically assesses recent developments in microalgal-based biolubricant production, including tribological performance, microalgae selection, cultivation, harvesting, lipid and polysaccharide extraction and conversion to biolubricants, and market development. Compared to petroleum-based lubricants in terms of tribological properties, biolubricants are compatible with most emerging applications, such as electric vehicles and wind turbines. Nevertheless, they are less thermally and chemically stable, thus, may not be suitable for some traditional applications such as internal combustion engines. Literature data corroborated in this study reveals an urgent need for further research to scale up microalgae production and lower the cost of biomass harvesting. While technologies for converting microalgae-derived lipids to biolubricants appear to be well established, additional work is necessary to also utilize polysaccharides as another key ingredient for producing biolubricants, especially for low-temperature applications. Extraction methods are well established but further research is also needed to reduce the ecological impact, especially to utilize green solvents and reduce solvent consumption. Additionally, future research should delve into the use of nanoparticles as effective additives to obtain microalgae-based biolubricants with superior properties. Finally, it is essential to standardize the labeling system of biolubricants to establish a global market.

Cyanobacteria newly isolated from marine volcanic seeps display rapid sinking and robust, high-density growth

Cyanobacteria are photosynthetic organisms that play important roles in carbon cycling and are promising bioproduction chassis. Here, we isolate two novel cyanobacteria with 4.6Mbp genomes, UTEX 3221 and UTEX 3222, from a unique marine environment with naturally elevated CO₂. We describe complete genome sequences for both isolates and, focusing on UTEX 3222 due to its planktonic growth in liquid, characterize biotechnologically relevant growth and biomass characteristics. UTEX 3222 outpaces other fast-growing model strains on a solid medium. It can double every 2.35 hours in a liquid medium and grows to high density (>31 g/L biomass dry weight) in batch culture, nearly double that of Synechococcus sp. PCC 11901, whose high-density growth was recently reported. In addition, UTEX 3222 sinks readily, settling more quickly than other fast-growing strains, suggesting favorable economics of harvesting UTEX 3222 biomass. These traits may make UTEX 3222 a compelling choice for marine carbon dioxide removal (CDR) and photosynthetic bioproduction from CO₂. Overall, we find that bio-prospecting in environments with naturally elevated CO₂ may uncover novel CO₂-metabolizing organisms with unique characteristics.

IMPORTANCE

Cyanobacteria provide a potential avenue for both biomanufacturing and combatting climate change via high-efficiency photosynthetic carbon sequestration. This study identifies novel photosynthetic organisms isolated from a unique geochemical environment and describes their genomes, growth behavior in culture, and biochemical composition. These cyanobacteria appear to make a tractable research model, and cultures are made publicly available alongside information about their culture and maintenance. Application of these organisms to carbon sequestration and/or biomanufacturing is discussed, including unusual, rapid settling characteristics of the strains relevant to scaled culture.

Taxonomic, Physiological, and Biochemical Characterization of Asterarcys quadricellularis AQYS21 as a Promising Sustainable Feedstock for Biofuels and ω-3 Fatty Acids

Asterarcys quadricellularis strain AQYS21, a green microalga isolated from the brackish waters near Manseong-ri Black Sand Beach in Korea, shows considerable potential as a source of bioactive compounds and biofuels. Therefore, this study analyzed the morphological, molecular, and biochemical characteristics of this strain; optimized its cultivation conditions; and evaluated its suitability for biodiesel production. Morphological analysis revealed characteristics typical of the Asterarcys genus: spherical to ellipsoidal cells with pyrenoid starch plates and mucilage-embedded coenobia. Additionally, features not previously reported in other A. quadricellularis strains were observed. These included young cells with meridional ribs and an asymmetric spindle-shaped form with one or two pointed ends. Molecular analysis using small-subunit rDNA and tufA sequences confirmed the identification of the strain AQYS21. This strain showed robust growth across a wide temperature range, with optimal conditions at 24 °C and 88 µmol m-2s-1 photon flux density. It was particularly rich in ω-3 α-linolenic acid and palmitic acid. Furthermore, its biodiesel properties indicated its suitability for biodiesel formulations. The biomass of this microalga may serve as a viable feedstock for biodiesel production and a valuable source of ω-3 fatty acids. These findings reveal new morphological characteristics of A. quadricellularis, enhancing our understanding of the species.

Enhancing CO2 dissolution and inorganic carbon conversion by metal-organic frameworks improves microalgal growth and carbon fixation efficiency

Carbon supplementation strategies still have certain practical application constraints. Zn/Fe-based metal-organic frameworks (MOFs) nanoparticles that which are not toxic to Scenedesmus obliquus were successfully introduced into microalgal solutions to overcome low CO2 solubility. The maximum specific surface area of MOFs reached 342.94 m2·g-1 at a Zn/Fe molar ratio of 10/1. Under the optimal MOFs concentrations of 2.5 mg·L-1, the conversion of inorganic carbon increased by 2.6-fold. When S. obliquuswas cultured in a MOFs-modified medium with 1.50 % CO2 at 25 °C, the CO2 mass transfer coefficient and mixing time reached 9.01 × 10-3 min-1 and 55 s, respectively. The maximum chlorophyll-a content, biomass productivity, and CO2 fixation efficiency reached 32.57 mg·L-1, 0.240 g·L-1·d-1 and 21.6 %, respectively. Enriching CO2 for ribulose-1,5-bisphosphate carboxylase/oxygenase carboxylation by MOFs may be the key to improving the photosynthetic efficiency of microalgae. This strategy could serve as a reference for improving the microalgal CO2 fixation efficiency.

Sustainable agriculture: leveraging microorganisms for a circular economy

Microorganisms serve as linchpins in agricultural systems. Classic examples include microbial composting for nutrient recovery, using microorganisms in biogas technology for agricultural waste utilization, and employing biofilters to reduce emissions from stables or improve water quality in aquaculture. This mini-review highlights the importance of microbiome analysis in understanding microbial diversity, dynamics, and functions, fostering innovations for a more sustainable agriculture. In this regard, customized microorganisms for soil improvement, replacements for harmful agrochemicals or antibiotics in animal husbandry, and (probiotic) additives in animal nutrition are already in or even beyond the testing phase for a large-scale conventional agriculture. Additionally, as climate change reduces arable land, new strategies based on closed-loop systems and controlled environment agriculture, emphasizing microbial techniques, are being developed for regional food production. These strategies aim to secure the future food supply and pave the way for a sustainable, resilient, and circular agricultural economy. KEY POINTS: • Microbial strategies facilitate the integration of multiple trophic levels, essential for cycling carbon, nitrogen, phosphorus, and micronutrients. • Exploring microorganisms in integrated biological systems is essential for developing practical agricultural solutions. • Technological progress makes sustainable closed-entity re-circulation systems possible, securing resilient future food production.

Effects of the supernatant of Chlorella vulgaris cultivated under different culture modes on lettuce (Lactuca sativa L.) growth

CO2 capture by microalgae is a feasible strategy to reduce CO2 emissions. However, large amounts of cell-free supernatant will be produced after microalgal harvesting, which may be harmful to the environment if it is disorderly discharged. In this study, Chlorella vulgaris (C. vulgaris) was cultivated under three common cultivation modes (autotrophic culture (AC), heterotrophic culture (HC) and mixotrophic culture (MC)), and the obtained supernatant was used as fertilizer to investigate its effect on the growth of lettuce. The biomass concentration of C. vulgaris cultivated under MC and HC was 3.25 and 2.59 times that of under AC, respectively. The contents of macronutrients in supernatant obtained from AC were higher than those of MC and HC. However, the contents of amino acids and hormones in supernatant obtained from MC and HC were higher than those of AC. The fresh shoot weight, fresh root weight and root length of lettuce treated with supernatant were significantly higher than that of control treatment. In addition, the contents of chlorophyll, soluble sugar and soluble protein in lettuce treated with supernatant were also higher than that of control treatment. However, the contents of nitrate in lettuce treated with supernatant was lower than that of control treatment. These results showed that the supernatant could promote the growth of lettuce and was a potential of fertilizer for crop planting.

Usage of Chlorella and diverse microalgae for CO2 capture - towards a bioenergy revolution

To address climate change threats to ecosystems and the global economy, sustainable solutions for reducing atmospheric carbon dioxide (CO2) levels are crucial. Existing CO2 capture projects face challenges like high costs and environmental risks. This review explores leveraging microalgae, specifically the Chlorella genus, for CO2 capture and conversion into valuable bioenergy products like biohydrogen. The introduction section provides an overview of carbon pathways in microalgal cells and their role in CO2 capture for biomass production. It discusses current carbon credit industries and projects, highlighting the Chlorella genus's carbon concentration mechanism (CCM) model for efficient CO2 sequestration. Factors influencing microalgal CO2 sequestration are examined, including pretreatment, pH, temperature, irradiation, nutrients, dissolved oxygen, and sources and concentrations of CO2. The review explores microalgae as a feedstock for various bioenergy applications like biodiesel, biooil, bioethanol, biogas and biohydrogen production. Strategies for optimizing biohydrogen yield from Chlorella are highlighted. Outlining the possibilities of further optimizations the review concludes by suggesting that microalgae and Chlorella-based CO2 capture is promising and offers contributions to achieve global climate goals.

Utilizing CO2 in industrial off-gas for microalgae cultivation: considerations and solutions

The utilization of microalgae to treat carbon dioxide (CO2)-rich industrial off-gas has been suggested as both beneficial for emissions reduction and economically favorable for the production of microalgal products. Common sources of off-gases include coal combustion (2-15% CO2), cement production (8-15% CO2), coke production (18-23% CO2), and ore smelting (6-7% CO2). However, industrial off-gas also commonly contains other acid gas components [typically nitrogen oxides (NOX) and sulfur dioxide (SO2)] and metals that could inhibit microalgae growth and productivity. To utilize industrial off-gas effectively in microalgae cultivation systems, a number of solutions have been proposed to overcome potential inhibitions. These include bioprospecting to identify suitable strains, genetic modification to improve specific cellular characteristics, chemical additions, and bioreactor designs and operating procedures.In this review, results from microalgae experiments related to utilizing off-gas are presented, and the outcomes of different conditions discussed along with potential solutions to resolve limitations associated with the application of off-gas.

Ensuring carbon neutrality via algae-based wastewater treatment systems: Progress and future perspectives

The emergence of algal biorefineries has garnered considerable attention to researchers owing to their potential to ensure carbon neutrality via mitigation of atmospheric greenhouse gases. Algae-derived biofuels, characterized by their carbon-neutral nature, stand poised to play a pivotal role in advancing sustainable development initiatives aimed at enhancing environmental and societal well-being. In this context, algae-based wastewater treatment systems are greatly appreciated for their efficacy in nutrient removal and simultaneous bioenergy generation. These systems leverage the growth of algae species on wastewater nutrients-including carbon, nitrogen, and phosphorus-alongside carbon dioxide, thus facilitating a multifaceted approach to pollution remediation. This review seeks to delve into the realization of carbon neutrality through algae-mediated wastewater treatment approaches. Through a comprehensive analysis, this review scrutinizes the trajectory of algae-based wastewater treatment via bibliometric analysis. It subsequently examines the case studies and empirical insights pertaining to algae cultivation, treatment performance analysis, cost and life cycle analyses, and the implementation of optimization methodologies rooted in artificial intelligence and machine learning algorithms for algae-based wastewater treatment systems. By synthesizing these diverse perspectives, this study aims to offer valuable insights for the development of future engineering applications predicated on an in-depth understanding of carbon neutrality within the framework of circular economy paradigms.

Advances in microalgae-based carbon sequestration: Current status and future perspectives

The advancement in carbon dioxide (CO2) sequestration technology has received significant attention due to the adverse effects of CO2 on climate. The mitigation of the adverse effects of CO2 can be accomplished through its conversion into useful products or renewable fuels. In this regard, microalgae is a promising candidate due to its high photosynthesis efficiency, sustainability, and eco-friendly nature. Microalgae utilizes CO2 in the process of photosynthesis and generates biomass that can be utilized to produce various valuable products such as supplements, chemicals, cosmetics, biofuels, and other value-added products. However, at present microalgae cultivation is still restricted to producing value-added products due to high cultivation costs and lower CO2 sequestration efficiency of algal strains. Therefore, it is very crucial to develop novel techniques that can be cost-effective and enhance microalgal carbon sequestration efficiency. The main aim of the present manuscript is to explain how to optimize microalgal CO2 sequestration, integrate valuable product generation, and explore novel techniques like genetic manipulations, phytohormones, quantum dots, and AI tools to enhance the efficiency of CO2 sequestration. Additionally, this review provides an overview of the mass flow of different microalgae and their biorefinery, life cycle assessment (LCA) for achieving net-zero CO2 emissions, and the advantages, challenges, and future perspectives of current technologies. All of the reviewed approaches efficiently enhance microalgal CO2 sequestration and integrate value-added compound production, creating a green and economically profitable process.

Sustainable microalgal biomass as a potential functional food and its applications in food industry: a comprehensive review

Microalgae (MA) are the most abundant seaweeds with high nutritional properties. They are accepted as potential biocatalysts for the bioremediation of wastewater. They are widely used in food, feed, and biofuel industries and can potentially be food for future generations. MA-based purification of wastewater technology could be a universal alternative solution for the recovery of resources from wastewater for low-cost biomass feedstock for industry. They provide a wide range of functional components, viz. omega-3 fatty acids, along with a plenteous number of pigments such as ß-carotene, astaxanthin, lutein, phycocyanin, and chlorophyll, which are used extensively as food additives and nutraceuticals. Further, proteins, lipids, vitamins, and carbohydrates are described as nutritional characteristics in MA. They are investigated as single-cell protein, thickening/stabilizing agents, and pigment sources in the food industry. The review emphasizes the production and extraction of nutritional and functional components of algal biomass and the role of microalgal polysaccharides in digestion and nutritional absorption in the gastrointestinal tract. Further, the use of MA in the food industry was also investigated along with their potential therapeutic applications.

Nanoplastics inhibit carbon fixation in algae: The effect of aging

Despite the considerable efforts devoted to the toxicological assessment of nanoplastics, the effect of UV-irradiation induced aging, a realistic environmental process, on the toxicity of nanoplastics toward microalgae and its underlying mechanisms remain largely unknown. Herein, this study comparatively investigated the toxicities of polystyrene nanoplastics (nano-PS) and the UV-aged nano-PS on the eukaryotic alga Chlorella vulgaris, focusing on evaluating their inhibitory effects on carbon fixation. Exposure to environmentally relevant concentrations (0.1-10 mg/L) of nano-PS caused severe damage to chloroplast, inhibited the photosynthetic efficiency and electron transport, and suppressed the activities of carbon fixation related enzymes. Multi-omics results revealed that nano-PS interfered with energy supply by disrupting light reactions and TCA cycle and hindered the Calvin cycle, thereby inhibiting the photosynthetic carbon fixation of algae. The above alterations partially recovered after a recovery period. The aged nano-PS were less toxic than the pristine ones as evidenced by the mitigated inhibitory effect on algal growth and carbon fixation. The aging process introduced oxygen-containing functional groups on the surface of nano-PS, increased the hydrophilicity of nano-PS, limited their attachment on algal cells, and thus reduced the toxicity. The findings of this work highlight the potential threat of nanoplastics to the global carbon cycle.

Nuclear mutagenesis and adaptive evolution improved photoautotrophic growth of Euglena gracilis with flue-gas CO2 fixation

To effectively improve biomass growth and flue-gas CO2 fixation of microalgae, acid-tolerant Euglena gracilis was modified with cobalt-60 γ-ray irradiation and polyethylene glycol (PEG) adaptive screening to obtain the mutant strain M800. The biomass dry weight and maximum CO2 fixation rate of M800 were both 1.47 times higher than that of wild strain, which was attributed to a substantial increase in key carbon fixation enzyme RuBisCO activity and photosynthetic pigment content. The high charge separation quantum efficiency in PSII reaction center, efficient light utilization and energy regulation that favors light conversion, were the underlying drivers of efficient photosynthetic carbon fixation in M800. M800 had stronger antioxidant capacity in sufficient high-carbon environment, alleviating lipid peroxidation damage. After adding 1 mM PEG, biomass dry weight of M800 reached 2.31 g/L, which was 79.1 % higher than that of wild strain. Cell proliferation of M800 was promoted, the apoptosis and necrosis rates decreased.

Recent advances in organic waste pyrolysis and gasification in a CO2 environment to value-added products

The persistent combustion of fossil fuels has resulted in a widespread greenhouse effect attributable to the continual elevation of carbon dioxide (CO2) levels in the atmosphere. Recent research indicates that utilizing CO2 as a pyrolysis gasification medium diminishes CO2 emissions and concurrently augments the value of the resultant pyrolysis gasification products. This paper reviews recent advancements in the pyrolysis gasification of organic solid wastes under a CO2 atmosphere. Meanwhile, the mechanisms of CO2 influence in the pyrolysis and gasification processes were also discussed. In comparison to noble gases, CO2 exhibits reactivity with char at≥710 °C, resulting in additional mass loss of the sample. In addition, CO2 was able to increase the specific surface area and stability of biochar and reduce biooil toxicity by lowering the content of cyclic compounds in the biooil, while CO2 was able to react with GPRs with some volatile products (e.g., light hydrocarbons) to increase biogas yield. Finally, CO2 also prevents catalyst deactivation by reducing secondary coke formation. We also recommend directing future attention toward utilizing unpurified CO2 in pyrolysis and gasification. This review aims to expand the utilization of CO2 and advocate for applying pyrolysis gasification products.

Perspectives on cultivation and harvesting technologies of microalgae, towards environmental sustainability and life cycle analysis

The development of algae is seen as a potential and ecologically sound approach to address the increasing demands in multiple sectors. However, successful implementation of processes is highly dependent on effective growing and harvesting methods. The present study provides a complete examination of contemporary techniques employed in the production and harvesting of algae, with a particular emphasis on their sustainability. The review begins by examining several culture strategies, encompassing open ponds, closed photobioreactors, and raceway ponds. The analysis of each method is conducted in a systematic manner, with a particular focus on highlighting their advantages, limitations, and potential for expansion. This approach ensures that the conversation is in line with the objectives of sustainability. Moreover, this study explores essential elements of algae harvesting, including the processes of cell separation, dewatering, and biomass extraction. Traditional methods such as centrifugation, filtration, and sedimentation are examined in conjunction with novel, environmentally concerned strategies including flocculation, electro-coagulation, and membrane filtration. It evaluates the impacts on the environment that are caused by the cultivation process, including the usage of water and land, the use of energy, the production of carbon dioxide, and the runoff of nutrients. Furthermore, this study presents a thorough examination of the current body of research pertaining to Life Cycle Analysis (LCA) studies, presenting a perspective that emphasizes sustainability in the context of algae harvesting systems. In conclusion, the analysis ends up with an examination ahead at potential areas for future study in the cultivation and harvesting of algae. This review is an essential guide for scientists, policymakers, and industry experts associated with the advancement and implementation of algae-based technologies.

Algal Biochar-Metal Nanocomposite Particles Tailor the Hydration Kinetics and Compressive Strength of Portland Cement Paste

Biochar can improve the mechanical properties of portland cement paste and concrete. In this work, we produced algal biochar-zinc (biochar-Zn) and algal biochar-calcium (biochar-Ca) nanocomposite particles and studied their effect on the hydration kinetics and compressive strength of cement paste. Results show that 3 wt % biochar-Zn delayed peak heat evolution during cement hydration from 8.3 to 10.0 h, while 3 wt % addition of biochar-Ca induced a minor acceleration of peak heat from 8.3 to 8.2 h. Both biochar-Zn and biochar-Ca nanocomposite particles increased the compressive strength of cement paste at 28 days by 22.6 and 17.0%, respectively. Data substantiate that retardation or minor acceleration of the reaction kinetics was due exclusively to the presence of Zn and Ca phases, respectively, while the enhanced strength was attributed to a nucleation effect induced by such phases and the internal curing effect of biochar.

Using microalgae to reduce the use of conventional fertilizers in hydroponics and soil-based cultivation

The intensive use of agrochemicals has led to nutrient loss, greenhouse gas emissions, and resource depletion, thus the development of sustainable agricultural solutions is required. Microalgal biomass has the potential to provide nutrients such as nitrogen, phosphorus, and potassium, along with various plant growth promoters, to enhance crop productivity and impart disease resistance. This study provides a comprehensive assessment of the potential applications of microalgal extracts and biomass in the contexts of seed germination, hydroponic systems, and soil-based crop cultivation. The results revealed that the extracts from Chlorella sp. and Anabaena sp. have no significant impact on the germination of wheat seeds. High concentrations of Chlorella sp. and Anabaena sp. cell extracts in hydroponics enhanced the length of cucumber seedling stems by 81.7 % and 58.3 %, respectively. Additionally, the use of microalgal cell extracts hindered root elongation while stimulating the growth of lateral and fibrous roots. Furthermore, the study compared the performance of 5 different fertilizers: 1) inorganic fertilizer (IF), 2) organic fertilizer (OF), 3) microalgae-based biofertilizer (MF), 4) inorganic fertilizer + microalgae-based biofertilizer (IM), 5) organic fertilizer + microalgae-based biofertilizer (OM). The findings indicate that the plant growth and soil physicochemical properties in the groups supplied with different fertilizers are comparable and significantly higher than those in the control group. The levels of protein, chlorophyll A, and chlorophyll B in the MF group increased significantly by 40 %, 29.2 %, and 33.5 %, respectively, compared to the control group. However, it remained notably lower compared to groups supplied with inorganic and organic fertilizers (p < 0.05). Combining microalgae with organic fertilizer can simultaneously enhance the yield and quality of Chinese cabbage, representing a promising source of crop nutrition. In conclusion, this study suggests that it is promising to use microalgae to reduce the use of conventional fertilizers in hydroponics and soil-based cultivation.

Biochemical trade-offs and opportunities of commercialized microalgae cultivation under increasing carbon dioxide

Microalgae's exceptional photosynthetic prowess, CO2 adaptation, and high-value bioproduct accumulation make them prime candidates for microorganism-based biorefineries. However, most microalgae research emphasizes downstream processes and applications rather than fundamental biomass and biochemical balances and kinetic under the influence of greenhouse gases such as CO2. Therefore, three distinctly different microalgae species were cultivated under 0% to 20% CO2 treatments to examine their biochemical responses, biomass production and metabolite accumulations. Using a machine learning approach, it was found that Chlorella sorokiniana showed a positive relationship between biomass and chl a, chl b, carotenoids, and carbohydrates under increasing CO2 treatments, while Chlamydomonas angulosa too displayed positive relationships between biomass and all studied biochemical contents, with minimal trade-offs. Meanwhile, Nostoc sp. exhibited a negative correlation between biomass and lipid contents under increasing CO2 treatment. The study showed the potential of Chlorella, Chlamydomonas and Nostoc for commercialization in biorefineries and carbon capture systems where their trade-offs were identified for different CO2 treatments and could be prioritized based on commercial objectives. This study highlighted the importance of understanding trade-offs between biomass production and biochemical yields for informed decision-making in microalgae cultivation, in the direction of mass carbon capture for climate change mitigation.

Influence of super-optimal light intensity on the acetic acid uptake and microalgal growth in mixotrophic culture of Chlorella sorokiniana in bubble-column photobioreactors

This study seeks to determine the influence of super-optimal light intensity on acetic acid uptake and its associated impact on the cellular composition of Chlorella sorokiniana in a semi-batch mixotrophic cultivation setup. Unicellular green microalga Chlorella sorokiniana is grown in a 1L bubble-column photobioreactor at light intensities from 6000 to 14,000 lx (≈81 to 189 µmol.photons.m-2.s-1). We find that microalgal acetic acid utilization reduces as illumination increases from an optimal 10,000 lx (≈135 µmol.photons.m-2.s-1) to a super-optimal zone (>10000 lx). This lowers microalgal growth (2.75 g/L) and acetic acid intake, which peak at 6 mL/L (10000 lx) and drop to 2 and 1 mL/L at 12,000 and 14,000 lx, respectively. Concurrently, the maximum lipid yield decreases from 0.66 g/L (10000 lx) to 0.54 g/L (12000 lx) and 0.42 g/L (14000 lx). Hence, super-optimal illumination not only disturbs phototrophy but also affects the heterotrophic component, creating an imbalance between the two.

Carbon sequestration performance, enzyme and photosynthetic activity, and transcriptome analysis of algae-bacteria symbiotic system after antibiotic exposure

Wastewater treatment technology based on algae-bacteria successfully combines pollutant purification, CO2 reduction and clean energy production to provide new insights into climate solutions. In this study, the reciprocal mechanisms between algae and bacteria were explored through physiological and biochemical levels of algae cells and differentially expressed genes (DEGs) based on the performance of immobilized algae-bacteria symbiotic particles (ABSPs) for CO2 fixation. The results showed that ABSPs promoted the CO2 fixation capacity of microalgae. The enhanced growth capacity and photosynthetic activity of algal cells in ABSPs are key to promoting CO2 uptake, and the stimulation of photosynthetic system and the promotion of Calvin cycle were the main contributors to enhanced carbon sequestration. These findings will provide guidance for carbon reduction using immobilized ABSS as well as deciphering the algae-bacteria reciprocal mechanism.

A photobioreactor for production of algae biomass from gaseous emissions of an animal house

Sustainable approaches to circular economy in animal agriculture are still poorly developed. Here, we report an approach to reduce gaseous emissions of CO2 and NH3 from animal housing while simultaneously using them to produce value-added biomass. To this end, a cone-shaped, helical photobioreactor was developed that can be integrated into animal housing by being freely suspended, thereby combining a small footprint with a physically robust design. The photobioreactor was coupled with the exhaust air of a chicken house to allow continuous cultivation of a mixed culture of Arthrospira spec. (Spirulina). Continuous quantification of CO2 and NH3 concentration showed that the coupled algae reactor effectively purifies the exhaust air from the chicken house while producing algal biomass. Typical production rates of greater than 0.3 g/l*day dry mass were obtained, and continuous operation was possible for several weeks. Morphological, biochemical, and genomic characterization of Spirulina cultures yielded insights into the dynamics and metabolic processes of the microbial community. We anticipate that further optimization of this approach will provide new opportunities for the generation of value-added products from gaseous CO2 and NH3 waste emissions, linking resource-efficient production of microalgae with simultaneous sequestration of animal emissions. KEY POINTS: • Coupling a bioreactor with exhaust gases of chicken coop for production of biomass. • Spirulina mixed culture removes CO2 and NH3 from chicken house emissions. • High growth rates and biodiversity adaptation for nitrogen metabolism. Towards a sustainable circular economy in livestock farming. The functional coupling of a helical tube photobioreactor with exhaust air from a chicken house enabled the efficient cultivation of Spirulina microalgae while simultaneously sequestering the animals' CO2 and NH3 emissions.

Realization process of microalgal biorefinery: The optional approach toward carbon net-zero emission

Increasing carbon dioxide (CO2) emission has already become a dire threat to the human race and Earth's ecology. Microalgae are recommended to be engineered as CO2 fixers in biorefinery, which play crucial roles in responding climate change and accelerating the transition to a sustainable future. This review sorted through each segment of microalgal biorefinery to explore the potential for its practical implementation and commercialization, offering valuable insights into research trends and identifies challenges that needed to be addressed in the development process. Firstly, the known mechanisms of microalgal photosynthetic CO2 fixation and the approaches for strain improvement were summarized. The significance of process regulation for strengthening fixation efficiency and augmenting competitiveness was emphasized, with a specific focus on CO2 and light optimization strategies. Thereafter, the massive potential of microalgal refineries for various bioresource production was discussed in detail, and the integration with contaminant reclamation was mentioned for economic and ecological benefits. Subsequently, economic and environmental impacts of microalgal biorefinery were evaluated via life cycle assessment (LCA) and techno-economic analysis (TEA) to lit up commercial feasibility. Finally, the current obstacles and future perspectives were discussed objectively to offer an impartial reference for future researchers and investors.

Continuous cultivation of microalgae yields high nutrient recovery from nitrified urine with limited supplementation

Microalgae can play a key role in the bioeconomy, particularly in combination with the valorisation of waste streams as cultivation media. Urine is an example of a widely available nutrient-rich waste stream, and alkaline stabilization and subsequent full nitrification in a bioreactor yields a stable nitrate-rich solution. In this study, such nitrified urine served as a culture medium for the edible microalga Limnospira indica. In batch cultivation, nitrified urine without additional supplements yielded a lower biomass concentration, nutrient uptake and protein content compared to modified Zarrouk medium, as standard medium. To enhance the nitrogen uptake efficiency and biomass production, nitrified urine was supplemented with potentially limiting elements. Limited amounts of phosphorus (36 mg L-1), magnesium (7.9 mg L-1), calcium (12.2 mg L-1), iron (2.0 mg L-1) and EDTA (88.5 mg Na2-EDTA.2H2O L-1) rendered the nitrified urine matrix as effective as modified Zarrouk medium in terms of biomass production (OD750 of 1.2), nutrient uptake (130 mg N L-1) and protein yield (47%) in batch culture. Urine precipitates formed by alkalinisation could in principle supply enough phosphorus, calcium and magnesium, requiring only external addition of iron, EDTA and inorganic carbon. Subsequently, the suitability of supplemented nitrified urine as a culture medium was confirmed in continuous Limnospira cultivation in a CSTR photobioreactor. This qualifies nitrified urine as a valuable and sustainable microalgae growth medium, thereby creating novel nutrient loops on Earth and in Space, i.e., in regenerative life support systems for human deep-space missions.

Removal and recovery of nutrients from septic tank wastewater using microalgae: Key factors and practical implications

Treatment of septic tank wastewater (STWW) with high concentrations of ammonium (NH4+) and total phosphorus (TP), is challenging in decentralized areas. Utilizing microalgae for STWW treatment can simultaneously recover nutrients in the form of high-value microalgal biomass. However, despite the potential benefits, microalgal treatment of STWW is rarely reported. Therefore, this work utilized bench-scale photobioreactors (PBR) to investigate different factors that could affect microalgal cultivation in STWW and treatment efficiency. Accordingly, it was observed that suspended solids present in STWW did not significantly affect the microalgae growth and nutrient removal efficiencies in bubble column PBR. On the other hand, the effect of endemic microorganism could not be verified in this study due to observed fungal contamination and change in nutrient profile of STWW after autoclave. Nevertheless, the highest microalgal growth and nutrient removal efficiencies of NH4+-N = 79.14% and TP = 41.11% were observed within 14 days of photoautotrophic cultivation in raw STWW. Further, 25 days of upscaled photoautotrophic cultivation in 4-L bubble column PBR was performed to study biomass yield, nutrient removal kinetics, and nutrient removal efficiency. Consequently, 0.75 g‧L-1 dry biomass was produced with improved removal efficiency of NH4+-N (96.16%), and TP (69.57%). Elemental analysis of biomass revealed that 62.99 ± 1.46 mg‧L-1 TN and 11.41 ± 1.42 mg‧L-1 TP were recovered. Further, 1.02 geq carbon dioxide (CO2) was bio-fixed with every liter of STWW treated. The findings of this study revealed that microalgae can be successfully utilized for the removal and recovery of nutrients from STWW.

A potential paradigm in CRISPR/Cas systems delivery: at the crossroad of microalgal gene editing and algal-mediated nanoparticles

Microalgae as the photosynthetic organisms offer enormous promise in a variety of industries, such as the generation of high-value byproducts, biofuels, pharmaceuticals, environmental remediation, and others. With the rapid advancement of gene editing technology, CRISPR/Cas system has evolved into an effective tool that revolutionised the genetic engineering of microalgae due to its robustness, high target specificity, and programmability. However, due to the lack of robust delivery system, the efficacy of gene editing is significantly impaired, limiting its application in microalgae. Nanomaterials have become a potential delivery platform for CRISPR/Cas systems due to their advantages of precise targeting, high stability, safety, and improved immune system. Notably, algal-mediated nanoparticles (AMNPs), especially the microalgae-derived nanoparticles, are appealing as a sustainable delivery platform because of their biocompatibility and low toxicity in a homologous relationship. In addition, living microalgae demonstrated effective and regulated distribution into specified areas as the biohybrid microrobots. This review extensively summarised the uses of CRISPR/Cas systems in microalgae and the recent developments of nanoparticle-based CRISPR/Cas delivery systems. A systematic description of the properties and uses of AMNPs, microalgae-derived nanoparticles, and microalgae microrobots has also been discussed. Finally, this review highlights the challenges and future research directions for the development of gene-edited microalgae.

Unlocking the potential of microalgae bio-factories for carbon dioxide mitigation: A comprehensive exploration of recent advances, key challenges, and energy-economic insights

Microalgae are promising alternatives to mitigate atmospheric CO₂ owing to their fast growth rates, resilience in the face of adversity and ability to produce a wide range of products, including food, feed supplements, chemicals, and biofuels. However, to fully harness the potential of microalgae-based carbon capture technology, further advancements are required to overcome the associated challenges and limitations, particularly with regards to enhancing CO₂ solubility in the culture medium. This review provides an in-depth analysis of the biological carbon concentrating mechanism and highlights the current approaches, including species selection, optimization of hydrodynamics, and abiotic components, aimed at improving the efficacy of CO₂ solubility and biofixation. Moreover, cutting-edge strategies such as gene mutation, bubble dynamics and nanotechnology are systematically outlined to elevate the CO₂ biofixation capacity of microalgal cells. The review also evaluates the energy and economic feasibility of using microalgae for CO₂ bio-mitigation, including challenges and prospects for future development.

Enhancement of carbon sequestration via MIL-100(Fe)@PUS in bacterial-algal symbiosis treating municipal wastewater

Bacterial-algal symbiosis (BAS) is a promising carbon neutrality technology to treat municipal wastewater. However, there are still non-trivial CO₂ emissions in BAS due to the slow diffusion and biosorption of CO₂. Aiming to reduce CO₂ emissions, the inoculation ratio of aerobic sludge to algae was further optimized at 4:1 on the base of favorable carbon conversion. MIL-100(Fe) served as CO₂ adsorbents was immobilized on polyurethane sponge (PUS) to increase the interaction with microbes. When MIL-100(Fe)@PUS was added to BAS in the treatment of municipal wastewater, zero CO₂ emission was achieved and the carbon sequestration efficiency was increased from 79.9% to 89.0%. Most genes related to metabolic function were derived from Proteobacteria and Chlorophyta. The mechanism of enhanced carbon sequestration in BAS could be attributed to both enrichment of algae (Chlorella and Micractinium) and increased abundance of functional genes related to PS I, PS II and Calvin cycle in photosynthesis.

Plant -microbe assisted emerging contaminants (ECs) removal and carbon cycling

Continuous increase in the level of atmospheric CO₂ and environmental contaminates has aggravated various threats resulting from environmental pollution and climate change. Research into plant -microbe interaction has been a central concern of ecology for over the year. However, despite the clear contribution of plant -microbe to the global carbon cycle, the role of plant -microbe interaction in carbon pools, fluxes and emerging contaminants (ECs) removal are still a poorly understood. The use of plant and microbes in ECs removal and carbon cycling is an attractive strategy because microbes operate as biocatalysts to remove contaminants and plant roots offer a rich niche for their growth and carbon cycling. However, bio-mitigation of CO₂ and removal of ECs is still under research phase because of the CO₂ capture and fixation efficiency is too low for industrial purposes and cutting-edge removal methods have not been created for such emerging contaminants.

Biochar production from microalgae: a new sustainable approach to wastewater treatment based on a circular economy

The generation of wastewater due to human activities are the main responsible for environmental problems. These problems are caused by the large amount of organic and inorganic pollutants related to the presence of pesticides, metals, pathogens, drugs and dyes. The photosynthetic treatment of effluents emerges as a sustainable and low-cost alternative for developing wastewater treatment systems based on a circular economy. Chemical compounds present in wastewater can be recovered and reused as a source of nutrients in microalgae cultivation to produce value-added bioproducts. The microalgal biomass produced in the cultivation with effluents has the potential to produce biochar. Biochar is carbon-rich charcoal that can be obtained by converting microalgae biomass through thermal decomposition of organic raw material under limited oxygen supply conditions. Pyrolysis, torrefaction, and hydrothermal carbonization are processes used for biochar synthesis. The application of microalgal biochar as an adsorbent material to remove several compounds present in effluents is an effective and fast treatment. This effectiveness is usually related to the unique physicochemical characteristics of the biochar, such as the presence of functional groups, ion exchange capacity, thermal stability, and high surface area, volume, and pore area. In addition, biochar can be reused in the adsorption process or applied in agriculture for soil correction. In this context, this review article describes the production, characterization, and use of microalgae biochar through a sustainable approach to wastewater treatment, emphasizing its potential in the circular economy. In addition, the article approaches the potential of microalgal biochar as an adsorbent material and its reuse after the adsorption of contaminants, as well as highlights the challenges and future perspectives on this topic.

Production of sustainable biofuels from microalgae with CO2 bio-sequestration and life cycle assessment

Due to anthropogenic emissions, there is an increase in the concentration of carbon dioxide (CO₂) in the atmosphere. Microalgae are versatile, universal, and photosynthetic microorganisms present in nature. Biological CO₂ sequestration using microalgae is a novel concept in CO₂ mitigation strategies. In the current review, the difference between carbon capture and storage (CCS), carbon capture utilization and storage (CCUS), and carbon capture and utilization (CCU) is clarified. The current status of CO₂ sequestration techniques is discussed, including various methods and a comparative analysis of abiotic and biotic sequestration. Particular focus is given to sequestration methods associated with microalgae, including advantages of CO₂ bio-sequestration using microalgae, a summary of microalgae species that tolerate high CO₂ concentrations, biochemistry of microalgal CO₂ biofixation, and elements influencing the microalgal CO₂ sequestration. In addition, this review highlights and summarizes the research efforts made on the production of various biofuels using microalgae. Notably, Chlorella sp. is found to be the most beneficial microalgae, with a sizeable hydrogen (H₂) generation capability ranging from 6.1 to 31.2 mL H₂/g microalgae, as well as the species of C. salina, C. fusca, Parachlorella kessleri, C. homosphaera, C. vacuolate, C. pyrenoidosa, C. sorokiniana, C. lewinii, and C. protothecoides. Lastly, the technical feasibility and life cycle analysis are analyzed. This comprehensive review will pave the way for promoting more aggressive research on microalgae-based CO₂ sequestration.

Mapping the field of microalgae CO2 sequestration: a bibliometric analysis

Microalgae CO₂ sequestration has gained considerable attention in the last three decades as a promising technology to slow global warming caused by CO₂ emissions. To provide a comprehensive and objective analysis of the research status, hot spots, and frontiers of CO₂ fixation by microalgae, a bibliometric approach was recently chosen for review. In this study, 1561 articles (1991-2022) from the Web of Science (WOS) on microalgae CO₂ sequestration were screened. A knowledge map of the domain was presented using VOSviewer and CiteSpace. It visually demonstrates the most productive journals (Bioresource Technology), countries (China and USA), funding sources, and top contributors (Cheng J, Chang JS, and their team) in the field of CO₂ sequestration by microalgae. The analysis also revealed that research hotspots changed over time and that recent research has focused heavily on improving carbon sequestration efficiency. Finally, commercialization of carbon fixation by microalgae is a key hurdle, and supports from other disciplines could improve carbon sequestration efficiency.

Biomass production of Chlorella pyrenoidosa by filled sphere carrier reactor: Performance and mechanism

Microalgae-based Carbon Capture, Utilization and Storage is vital for mitigating global climate change. A filled sphere carrier reactor was developed to achieve high biomass production and carbon sequestration rate of Chlorella pyrenoidosa. By introducing air (0.04% CO₂) into the reactor, the dry biomass production achieved 8.26 g/L with the optimized parameters of polyester carrier, 80% packing density, 5-fold concentrated nutrient combining 0.2 mol/L phosphate buffer. At simulated flue gas CO₂ concentration of 7%, the dry biomass yield and carbon sequestration rate reached up to 9.98 g/L and 18.32 g/L/d in one day, which were as high as 249.5 and 79.65 times comparing with those of suspension culture at day 1, respectively. The mechanism was mainly attributed to the obvious intensification of electron transfer rate and remarkable increase of RuBisCO enzyme activity in the photosynthetic chloroplast matrix. This work provided a novel approach for potential microalgae-based carbon capture and storage.

Enhanced carbon dioxide fixation of Chlorella vulgaris in microalgae reactor loaded with nanofiber membrane carried iron oxide nanoparticles

To improve the CO₂ dissolution and carbon fixation in the process of microalgae capturing CO₂ from flue gas, a nanofiber membrane containing iron oxide nanoparticles (NPsFe₂O₃) for CO₂ adsorption was prepared, and coupled with microalgae utilization to achieve carbon removal. The performance test results showed that the largest specific surface area and pore size were 8.148 m² g^-1 and 27.505 Å, respectively, when the nanofiber membrane had 4% NPsFe₂O₃. Through CO₂ adsorption experiments, it was found that the nanofiber membrane could prolong the CO₂ residence time and increase CO₂ dissolution. Then, the nanofiber membrane was used as a CO₂ adsorbent and semifixed culture carrier in the Chlorella vulgaris culture process. The results showed that compared with the group without nanofiber membrane (0 layer), the biomass productivity, CO₂ fixation efficiency and carbon fixation efficiency of Chlorella vulgaris with 2 layers of membranes increased by 1.4 times.

Revealing mechanism and influence of microalgae cells' periodical auto-agglomeration induced by high concentration of carbon dioxide

The efficient cultivation of microalgae using CO₂ from flue gas can be a win-win situation for both environmental protection and energy accessibility. In general, 10-20% of CO₂ in flue gas would decrease pH and inhibit microalgae growth. However, Chlorella sorokiniana MB-1 under 15% CO₂ showed a periodical auto-agglomeration, which promoted microalgae growth on the contrary in this study. The maximum biomass concentration of 3.27 g L^-1 was higher than that cultivated with an optimal CO₂ concentration. The pH decreased to 6.04 after the mixed gas with 15% CO₂ (v/v) was bubbled into medium for 0.5 hours, which resulted in auto-agglomeration to protect microalgae from acidification and keep a high specific growth rate of 0.03 h^-1. Then the pH recovered to 7 during stabilization phase, auto-agglomeration ratio was up to 100% because of lamellar extracellular polymeric substances. Therefore, the interesting periodical agglomeration both enhanced growth and simplified harvesting.

CO2 gradient domestication improved high-concentration CO2 tolerance and photoautotrophic growth of Euglena gracilis

In order to improve CO₂ biofixation efficiency of microalgae cultivated with coal-chemical flue gas, CO₂ gradient domestication was employed to improve high-concentration CO₂ tolerance and photoautotrophic growth of acid-tolerant Euglena gracilis. The dried biomass yield of photoautotrophic growth of E.gracilis increased from 1.09 g/L (wild-type strain) by 21 % to 1.32 g/L with CO₂ gradient domestication to 15 % CO₂. The RuBisCO activity and biomass production of E.gracilis strain domesticated to 99 % CO₂ were 2.63 and 3.4 times higher, respectively, than those of wild-type strain. The chlorophyll a and b contents were 2.52 and 1.79 times higher, respectively, than those of wild-type strain. Superoxide dismutase and catalase activities of 99 % CO₂-domesticated strain increased to 1.24 and 6 times, which reduced peroxide damage under high carbon stress and resulted in lower apoptotic and necrotic rates of domesticated strain. Thus, this work provides valuable guidance for CO₂ fixation and adaptive evolution of E. gracilis in industrial flue gas.

Clustered regularly interspaced short palindromic repeats (CRISPR) technology and genetic engineering strategies for microalgae towards carbon neutrality: A critical review

Carbon dioxide is the major greenhouse gas and regards as the critical issue of global warming and climate changes. The inconspicuous microalgae are responsible for 40% of carbon fixation among all photosynthetic plants along with a higher photosynthetic efficiency and convert the carbon into lipids, protein, pigments, and bioactive compounds. Genetic approach and metabolic engineering are applied to accelerate the growth rate and biomass of microalgae, hence achieve the mission of carbon neutrality. Meanwhile, CRISPR/Cas9 is efficiently to enhance the productivity of high-value compounds in microalgae for it is easier operation, more affordable and is able to regulate multiple genes simultaneously. The genetic engineering strategies provide the multidisciplinary concept to evolute and increase the CO₂ fixation rate through Calvin-Benson-Bassham cycle. Therefore, the technologies, bioinformatics tools, systematic engineering approaches for carbon neutrality and circular economy are summarized and leading one step closer to the decarbonization society in this review.

Role of microalgae in achieving sustainable development goals and circular economy

In 2015, the United Nations General Assembly (UNGA) set out 17 Sustainable Development Goals (SDGs) to be achieved by 2030. These goals highlight key objectives that must be addressed. Each target focuses on a unique perspective crucial to meeting these goals. Social, political, and economic issues are addressed to comprehensively review the main issues combating climate change and creating sustainable and environmentally friendly industries, jobs, and communities. Several mechanisms that involve judicious use of biological entities are among instruments that are being explored to achieve the targets of SDGs. Microalgae have an increasing interest in various sectors, including; renewable energy, food, environmental management, water purification, and the production of chemicals such as biofertilizers, cosmetics, and healthcare products. The significance of microalgae also arises from their tendency to consume CO2, which is the main greenhouse gas and the major contributor to the climate change. This work discusses the roles of microalgae in achieving the various SDGs. Moreover, this work elaborates on the contribution of microalgae to the circular economy. It was found that the microalgae contribute to all the 17th SDGs, where they directly contribute to 9th of the SDGs and indirectly contribute to the rest. The major contribution of the Microalgae is clear in SDG-6 "Clean water and sanitation", SDG-7 "Affordable and clean energy", and SDG-13 "Climate action". Furthermore, it was found that Microalgae have a significant contribution to the circular economy.

Comparative life cycle assessment of conventional and novel microalgae production systems and environmental impact mitigation in urban-industrial symbiosis

The versatility of microalgae biomass as candidates for various products and bioremediation needs motivates interests towards design and implementation of novel microalgae bioreactors. Conventional open-reactors are reliant on large quantities of sunlight and space while yields are constrained by outdoor environment conditions. Conversely, closed-reactor systems like bubble columns reduces these constrains on microalgae growth while occupying far less space at the expense of high energy demands, notably from lighting systems. A novel patented closed reactor design has recently been proposed that improves the bubble column concept with an efficient and effective lighting system. The present study uses Life Cycle Assessment approach to compare the environmental performance of conventional reactors and the proposed internally luminated novel closed reactor design, expressing impacts per kg biostimulant for the Scenedesmus almeriensis harvest from such units. All performance data was collected from a pilot facility in Almeria, Spain. Urban-industrial symbiosis scenarios are also portrayed in the study using wastewater and incinerator flue gas. Results show that under synthetic nutrient and carbon inputs in Spanish pilot operations, the cumulative energy demand for the novel photobioreactors is similar to conventional vertically-stacked horizon bioreactors but are substantially more demanding than conventional open reactors. However, when leveraging renewable energy sources and the photosynthesis process to consume wastestreams in urban-industrial symbiosis scenarios, the novel photobioreactor was able to achieve up to 80 % improvements in several impact categories e.g. eutrophication and climate change. Impact mitigation credits per kg dwt biomass across all energy scenarios in symbiosis amount to ≈1.8 kg CO2eq and ≈0.09 kg PO4 eq. This highlights that such closed and internally illuminated photobioreactors can be competitive with conventional reactors, and have potential to harness photosynthesis to reduce environmental burdens in an urban-industrial symbiosis setting. Possible economies of scale and the associated potential gains in efficiencies are further discussed.

Emerging technologies of employing algae and microorganisms to promote the return-to-field of crop straws: A mini-review

As an agricultural waste, crop straw enriched with a variety of nutrients is regarded as an important fertilizer resource. In the past, crop straw return-to-field played a key role in the sustainability of agricultural environment, but some problems, such as ammonia loss in ammoniation, low rate of straw decomposition, and high carbon footprint, attracted researchers' attentions. In this paper, we propose three technical routes, including cyanobacteria-based ammonia assimilation, microorganisms-based crop straw pretreatment, and microalgae-based carbon capture, to address the aforementioned problems. Besides, challenges which may hinder the practical application of these technical routes as well as the potential solutions are discussed in detail. It is expected that this paper could provide new ideas to the practical application of crop straw return-to-field.

Advancement on mixed microalgal-bacterial cultivation systems for nitrogen and phosphorus recoveries from wastewater to promote sustainable bioeconomy

Biological wastewater treatment is a promising and environmentally friendly method that utilises living microorganisms to remediate water and enable recovery or conversion of contaminants into valuable products. For many decades, microalgae and cyanobacteria, photosynthetic living microorganisms, have been explored extensively for wastewater bioremediation. They can be used for recovering valuable nutrients such as nitrogen and phosphorous from secondary effluents and capable of transforming those nutrients into marketable products such as biofuels, biofertilisers, nutraceutical, and pigments for promoting a Bio-Circular Green economy. In recent years, there has been a shift towards mixing compatible microalgae with bacteria, which is inspired by their natural symbiotic relationships to increase nitrogen and phosphorus recoveries. With this enhanced bioremediation, recovery of polluted wastes can be intensified and higher biomass quality (with high nutrient density) can be achieved. This review focuses on the state-of-the-art of mixed microalgal-bacterial cultivating systems. A comprehensive comparison of existing studies that used Chlorella species as microalgae in various mixed microalgal-bacterial cultivating systems (suspension, biofilm, and immobilisation) for nitrogen and phosphorus recoveries from wastewater is conducted. Key technical challenges such as balancing microalgae and bacteria species, pH regulation, light distribution, biomass harvesting, and biomass conversion are also discussed. From the data comparisons among different cultivation systems, it has been suggested that immobilisation appears to require less amount of operational light compared to the suspended and biofilm-based systems for similar nitrogen and phosphorus removal efficiencies.

Microalgae-based biotechnological sequestration of carbon dioxide for net zero emissions

Excessive carbon dioxide (CO₂) emissions into the atmosphere have become a dire threat to the human race and environmental sustainability. The ultimate goal of net zero emissions requires combined efforts on CO₂ sequestration (natural sinks, biomass fixation, engineered approaches) and reduction in CO₂ emissions while delivering economic growth (CO₂ valorization for a circular carbon bioeconomy, CCE). We discuss microalgae-based CO₂ biosequestration, including flue gas cultivation, biotechnological approaches for enhanced CO₂ biosequestration, technological innovations for microalgal cultivation, and CO₂ valorization/biofuel productions. We highlight challenges to current practices and future perspectives with the goal of contributing to environmental sustainability, net zero emissions, and the CCE.

Using carbon dioxide-added microalgal-bacterial granular sludge for carbon-neutral municipal wastewater treatment under outdoor conditions: Performance, granule characteristics and environmental sustainability

Microalgal-bacterial granular sludge (MBGS) process has a gorgeous prospect for municipal wastewater treatment, but the research on the treatment of complex organic wastewater by MBGS process with CO₂ addition under outdoor conditions is not enough. Therefore, this paper evaluated the feasibility of CO₂-added MBGS process for complex organic wastewater disposal under natural day-night cycles. The results showed that the addition of CO₂ overall improved the removal efficiency of pollutants. Typically, the removal efficiency of total phosphorus increased averagely from 88.5 % to 95.0 % in 12-h day cycle and from 26.2 % to 45.3 % in 12-h night cycle. The addition of CO₂ increased the size of MBGS from 1.0 mm to 16.5 mm within 30 days due to extracellular polymeric substances secretion and the dominant filamentous microalgae on granules. The decrease of catalase activity and malondialdehyde content indicated that CO₂ reduced oxidative damage and maintained the normal growth of MBGS. Further estimates of the collected gas showed that CO₂-added MBGS process could reduce global CO₂ emissions by one hundred million tons per year. This study is expected to contribute to the goal of carbon neutrality in the area of wastewater treatment by MBGS process.

Life-cycle assessment of flue gas CO2 fixation from coal-fired power plant and coal chemical plant by microalgae

The technology of flue gas CO₂ fixation by microalgae is highly attractive in the era of CO₂ neutrality. However, CO₂ emission along the whole process has yet to be sufficiently evaluated. Here, a life-cycle assessment was performed to evaluate the energy conversion characteristics and environmental impacts of flue gas CO₂ fixation from coal-fired power plant (Case 1) and coal chemical plant (Case 2) by microalgae. The results show that total energy consumption and CO₂ gas emissions for Case 1 are 27.5-38.0 MJ/kg microalgae power (MP) and 5.7-7.7 kg CO₂ equiv/kg MP, respectively, which are lower than that for Case 2 (122.5-181.3 MJ/kg MP and 32.7-48.6 kg CO₂ equiv/kg MP). The CO₂ gas aeration rate and microalgae growth rate are the two most sensitive parameters for the energy conversion and net CO₂ emission. Therefore, increasing the CO₂ aeration efficiency and microalgae growth rate are key to advance the technology of flue gas CO₂ fixation by microalgae which will contribute to carbon naturality.

CO2 bio-mitigation using genetically modified algae and biofuel production towards a carbon net-zero society

CO₂ sequestration carried by biological methodologies shows enhanced potential and has the advantage that biomass produced from the captured CO₂ can be used for different applications. Bio-mitigation of carbons through a micro-algal system addresses a promising and feasible option. This review mostly focused on the role of algae, particular mechanisms, bioreactors in algae cultivation, and genetically modified algae in CO₂ fixation and energy generation systems. A combination of CO₂ bio-mitigation and biofuel production might deliver an extremely promising alternative to current CO₂ mitigation systems. Bio mitigation in which the excess carbon is captured and bio fixation which the carbon is captured by algae or autotrophs and used for producing biofuel. This review revealed that steps for biofuel production from algae include factors affecting, harvesting techniques, oil extraction and transesterification. This review helps environmentalists and researchers to assess the effect of algae-based biorefinery on the green environment.