Removal of cadmium and lead ions from water by sulfonated magnetic nanoparticle adsorbents

Functionality of wheat straw-derived biochar enhanced its efficiency for actively capping Cd and Pb in contaminated water and soil matrices: Insights through batch adsorption and flow-through experiments

The impact of functionality of biochar on pressing environmental issue of cadmium (Cd) and lead (Pb) co-contamination in simultaneous soil and water systems has not sufficiently reported. This study investigated the impact of Fe- and Mg-functionalized wheat straw biochar (Fe-WSBC and Mg-WSBC) on Cd and Pb adsorption/immobilization through batch sorption and column leaching trials. Importantly, Fe-WSBC was more effective in adsorbing Cd and Pb (82.84 and 111.24 mg g-1), regeneration ability (removal efficiency 94.32 and 92.365), and competitive ability under competing cations (83.15 and 84.36%) compared to other materials (WSBC and Mg-WSBC). The practical feasibility of Fe-WSBC for spiked river water verified the 92.57% removal of Cd and 85.73% for Pb in 50 mg L-1 and 100 mg L-1 contamination, respectively. Besides, the leaching of Cd and Pb with Fe-WSBC under flow-through conditions was lowered to (0.326 and 17.62 mg L-1), respectively as compared to control (CK) (0.836 and 40.40 mg L-1). In short, this study presents the applicable approach for simultaneous remediation of contaminated water and soil matrices, offering insights into environmentally friendly green remediation strategies for heavy metals co-contaminated matrices.

A CRISPR/Cas12a-assisted bacteria quantification platform combined with magnetic covalent organic frameworks and hybridization chain reaction

The total bacterial count is an important indicator of food contamination in food safety supervision and management. Recently, the CRISPR/Cas12a system integrated with nucleic acid amplification has increasingly shown tremendous potential in microorganism detection. However, a general quantification strategy for total bacteria count based on the CRISPR/Cas12a system has not yet been developed. Herein, we established a sensitive bacterial quantification strategy based on the CRISPR/Cas12a system combined with magnetic covalent organic frameworks (MCOFs) and hybridization chain reaction (HCR). MCOFs acted as a carrier, adsorbing the ssDNA as HCR trigger sequence through π-π stacking. Then, the HCR circuit produces DNA duplexes containing the PAM sequences that activate the trans-cleavage activity of Cas12a for further signal amplification. Under the optimal conditions, the proposed method can quantify total bacteria in 50 min with a minimum detection concentration of 10 CFU/mL. The successful applications in food samples confirmed the feasibility and broad application prospects.

Hypercrosslinked waste polycarbonate to remove heavy metal contaminants from wastewater

In this research, the waste polycarbonate was hypercrosslinked during the Friedel-Crafts reaction to eliminate metallic ions from the wastewater solution. The experiments for inspecting the adsorption behavior of lead and cadmium ions were conducted at the initial concentration of 20-100 mg/L, contact time of 10-80 min, temperature of 20-80 °C, and pH of 6-11. The isotherm, kinetic, and thermodynamic models have been used to explain the behavior of the metal ions removal process. The correlation coefficient and adsorption capacity of the kinetic model for cadmium ion have obtained 0.995 and 160.183 mg/g, respectively, and the correlation coefficient and adsorption capacity of the kinetic model for lead ion has obtained 0.998 and 160.53 mg/g, respectively, which declared that the cascade was not monolayer. The correlation coefficient of the Freundlich is calculated at 0.995 and 0.998 for Cd and Pb, respectively, indicating the resin plane was not homogenized. The n constant for cadmium and lead ions has been calculated at 2.060 and 1.836, respectively, confirming that the resin is not homogenized, and the process has performed well. Afterward, the values of enthalpy and Gibbs free energy changes were obtained at - 7.68 kJ/mol and - 0.0231 kJ/mol.K for lead ions, respectively, which implies the exothermic and spontaneous state of the process. The values of enthalpy and Gibbs free energy changes have been obtained at - 6.62 kJ/mol and - 0.0204 kJ/mol.K for cadmium ions, respectively, which implies the exothermic and spontaneous nature of the adsorption. Also, the optimal empirical conditions for lead and cadmium ions have been found at a time of 60 min, temperature of 20 °C, initial concentration of 100 mg/L, and pH of 10. At a time of 45 min, the diffusion coefficient and mass transfer coefficient for lead ions have been calculated at 0.1269 × 1020 m2/s and 0.2028 × 1015 m/s, respectively. In addition, at a time of 45 min, the diffusion coefficient and mass transfer coefficient for cadmium ions have been calculated at 0.1463 × 1020 m2/s and 0.1054 × 1015 m/s, respectively. Moreover, the mechanism study explains that the C-O-C and C-H in the aromatic groups have a crucial aspect in the bond formation among metallic ions and resin.

Fabrication of two novel amino-functionalized and starch-coated CuFe2O4-modified magnetic biochar composites and their application in removing Pb2+ and Cd2+ from wastewater

Novel magnetic biochar composites (SFeCu@SBCO and FeCu@SBCO-NH2) were fabricated by modifying oxidized sawdust biochar (SBCO) with Fe/Cu loading, starch-coating/amination, characterized (FTIR, XRD, BET, SEM-EDS and XPS) and applied in capturing Pb2+ and Cd2+ from wastewater. Adsorption experiments revealed that SFeCu@SBCO and FeCu@SBCO-NH2 exhibited extraordinary adsorption performance toward Pb2+/Cd2+ with the maximum adsorption capacity reaching 184.26/173.35 mg g-1 and 201.43/190.81 mg g-1, respectively, which were >5 times higher than those of SBC. The great increase in adsorption capacity of the two adsorbents was ascribed to the introduction of CuFe2O4 and starch/amino groups. Pb2+ and Cd2+ adsorption was an endothermic reaction controlled by monolayer chemisorption. Complexation and electrostatic attraction were the two predominant mechanisms. Besides, ion exchange together with physical adsorption also occurred during the adsorption. Additionally, the both adsorbents displayed favorable stability and reusability as well as desirable anti-interfering ability to other metal cations. Taken together, the both adsorbents could be utilized as reusable magnetic adsorbents with promising prospect in the effective remediation of Pb2+/Cd2+ contaminated water. The study not only contributed to the better understanding of biochar modification strategy and the application of modified biochar in heavy metals pollutants removal, but also realized resource utilization of biomass waste.

Synthesis, structural, magnetic property, and Cd(II) adsorption behavior of Ca-substituted MgFe2O4 nanomaterials in aqueous solutions

In the present study, magnetic nanomaterials (Mg1-xCaxFe2O4, 0.0 ≤ x ≤ 0.8) were prepared via a simple sol-gel method. The samples were characterized using XRD, TEM, SEM, EDX, FTIR, BET, and VSM. The structural and magnetic properties of prepared nanomaterials (NMs) were investigated, and the adsorption capacity of Cd2+ from aqueous solution was evaluated via flame atomic absorption spectroscopy (AAS). The impact of several factors on Cd2+ adsorption such as contact time (1-60 min), pH (3-8), dose (0.003-0.03 g), and initial concentration of Cd2+ (5-60 mg L-1) has been assessed. The adsorption capacity of Cd2+ for the prepared NMs followed the pseudo-second order. Several isotherm models were analyzed, and the Langmuir model was found to be the best fit for NMs. Among as-prepared NMs, Mg0.8Ca0.2Fe2O4 (MCF2, cubic 97%, orthorhombic 3%, qe 100 mg g-1) and Mg0.2Ca0.8Fe2O4 (MCF8, cubic 18%, orthorhombic 83%, qe 90 mg g-1) samples exhibited the highest adsorption performance at conditions, viz., contact time 20 min, pH 7, NM dosage 3 mg, and ions at a concentration 60 mg l-1. Cd removal percentages were achieved 93 and 75 for MCF2 and MCF8, respectively. Overall, the prepared MCF2 and MCF8 NMs could be used as effective adsorbents to eliminate toxic Cd2+ from polluted aqueous solution.

Synthesis of Chemically Modified Acid-Functionalized Multiwall Carbon Nanotubes with Benzimidazole for Removal of Lead and Cadmium Ions from Wastewater

In this work, acid-functionalized multiwalled carbon (MWCNTs–CO2H) nanotube was successfully functionalized with a heterocyclic scaffold, namely benzimidazole, to give novel functionalized multiwalled carbon nanotubes (BI@MWCNTs). Then, FTIR, XRD, TEM, EDX, Raman spectroscopy, DLS, and BET analyses were used to characterize the synthesized BI@MWCNTs. The effectiveness of the adsorption of two heavy metal ions, Cd2+ and Pb2+, in single metal and mixed metal solutions on the prepared material was investigated. Influencing parameters for the adsorption method, for example duration, pH, starting metal concentration, and BI@MWCNT dosage, were examined for both metal ions. Moreover, adsorption equilibrium isotherms fit with the Langmuir and Freundlich models perfectly, while the intra-particle diffusion models provide pseudo-second order adsorption kinetics. The adsorption of Cd2+ and Pb2+ ions onto BI@MWCNTs revealed an endothermic and a spontaneous method with great affinity as a result of the negative values of Gibbs free energy (ΔG) and the positive values of enthalpy (ΔH) and entropy (ΔS). Both Pb2+ and Cd2+ ions were completely eliminated from aqueous solution (100 and 98%, respectively) using the prepared material. Additionally, BI@MWCNTs have a high adsorption capacity and were regenerated in a simple way and reused for six cycles, which make them a cost-effective and efficient absorbent for the removal of such heavy metal ions from wastewater.

The effective removal of Ni2+, Cd2+, and Pb2+ from aqueous solution by adenine-based nano-adsorbent

The presence of heavy metal ions in drinking and wastewater generates environmental and human health concerns as they are known as cumulative poisons. Therefore, the purification of contaminated waters is an important ecological issue. Various techniques have been developed to address this issue, where adsorption has received widespread attention. The facile synthesis of effective adenine-based nano-adsorbents is reported and adsorptive removal of Ni²⁺, Cd²⁺, and Pb²⁺ from aqueous media was investigated by inductively-coupled plasma analyses, adsorption isotherms, kinetics, and thermodynamic studies. The effects of pH, adsorbent dose, contact time, and temperature were optimized. The maximum adsorption capacity was achieved at pH = 7, an adsorbent dose of 25 mg, and an initial concentration of 50 mg L^-1 at 25 °C. A thermodynamic study showed that adsorption is an endothermic process, and the Langmuir model fitted well to the ion adsorption data to reveal that the maximum adsorption capacities for Ni²⁺, Cd²⁺, and Pb²⁺ were 273.7, 252.4, and 249.8 mg g^-1, respectively.

Characterization of Modified Mechanically Activated Cassava Starch Magnetic Porous Microspheres and Its Adsorption for Cd(II) Ions

The magnetic polymer microsphere is a promising adsorbent due to its high adsorption efficiency and good regeneration ability from wastewater. Cassava starch magnetic porous microspheres (AAM-MSMPMs) were synthesized by graft copolymerization in inverse emulsion. Mechanically activated cassava starch (MS) was used to graft skeletons, vinyl monomers [acrylic acid (AA) and acrylamide (AM)] as copolymerized unsaturated monomers, methyl methacrylate (MMA) as the dispersing agent, and polyethylene glycol/methanol (PEG2000/MeOH) as the porogen. It was found that the AAM-MSMPM adsorbent is superparamagnetic, the saturation magnetization is 14.9 emu·g-1, and it can be rapidly and directionally separated from Cd(II) ions in aqueous solution. The FTIR indicated that the carboxyl and hydroxyl groups were grafted into MS. The AAM-MSMPM had good speroidization and a uniform size. After the porogen was added, the particle size of the AAM-MSMPM decreased from 19.00 to 7.00 nm, and the specific surface area increased from 7.00 to 35.00 m2·g-1. The pore volume increased from 0.03 to 0.13 cm3·g-1. The AAM-MSMPM exhibited a large specific surface area and provided more adsorption active sites for Cd(II) ions. The maximum adsorption capacity of the AAM-MSMPM for Cd(II) ions was 210.68 mg·g-1, i.e., 81.02% higher than that without porogen. Additionally, the Cd(II) ion adsorption process on the AAM-MSMPM can be described by Langmuir isothermal and pseudo-second-order kinetic models. A chemical reaction dominated the Cd(II) ion adsorption process on the AAM-MSMPM, and chemisorption was the rate-controlling step during the Cd(II) ion adsorption process. The AAM-MSMPM still had excellent stability after five consecutive reuses.

Equilibrium kinetics and thermodynamic studies on biosorption of heavy metals by metal-resistant strains of Trichoderma isolated from tannery solid waste

This study was aimed at finding the metal sorption potential of six indigenous Trichoderma strains by using batch experiments for Cd (II), Cr (VI), Cu (II), and Pb (II). Trichoderma atrobrunneum showed maximum metal biosorption potential at 800 mg L^-1 of initial concentration. Two adsorption isotherm models, (1) Langmuir (2) Freundlich models, were employed on the biosorption data obtained at various initial metal concentrations (10 mg L^-1-200 mg L^-1) and pseudo-first (PSI) and pseudo-second (PSII) order equilibrium kinetic models were subjected to data of agitation time (3-7 days). A maximum correlation coefficient value (R²) of ≤ 1 was observed for the Langmuir and PSII model. Results revealed that pH 6-7 was the best for metal sorption, while metal removal efficiency was increased by increasing temperature (298 K, 303 K, 308 K, 313 K). The results of thermodynamic study parameters (∆G°, ∆H°, ∆S°) indicated that heavy metal biosorption by Trichoderma strains was an endothermic, spontaneous, and feasible process. Moreover, surface characterization analysis through SEM, BET, FTIR, and XRD showed that T. atrobrunneum and Trichoderma sp. could adsorb more metal ions when grown in high metal concentrations. The results indicate that living biomass of T. atrobrunneum and Trichoderma sp. is an effective multi-metal biosorbent that can be used for efficacious bioremediation of bio-treatment of heavy metal polluted wastewater.

Systematic and Bibliometric Analysis of Magnetite Nanoparticles and Their Applications in (Biomedical) Research

Recent reports show air pollutant magnetite nanoparticles (MNPs) in the brains of people with Alzheimer's disease (AD). Considering various field applications of MNPs because of developments in nanotechnology, the aim of this study is to identify major trends and data gaps in research on magnetite to allow for relevant environmental and health risk assessment. Herein, a bibliometric and systematic analysis of the published magnetite literature (n = 31 567) between 1990 to 2020 is completed. Following appraisal, publications (n = 244) are grouped into four time periods with the main research theme identified for each as 1990-1997 "oxides," 1998-2005 "ferric oxide," 2006-2013 "pathology," and 2014-2020 "animal model." Magnetite formation and catalytic activity dominate the first two time periods, with the last two focusing on the exploitation of nanoparticle engineering. Japan and China have the highest number of citations for articles published. Longitudinal analysis indicates that magnetite research for the past 30 years shifted from environmental and industrial applications, to biomedical and its potential toxic effects. Therefore, whilst this study presents the research profile of different countries, the development in research on MNPs, it also reveals that further studies on the effects of MNPs on human health is much needed.

Preparation of biomass-based hydrogels and their efficient heavy metal removal from aqueous solution

In this work, a porous tobacco straw-based polyacrylic acid hydrogel STS-PAA with high adsorption performance was prepared by polymerizing pretreated waste tobacco straw (TS) with acrylic acid/potassium acrylate by UV radiation initiation. The adsorption performance of metal ions was investigated. The effects of different temperatures (25°C, 35°C, and 45°C), adsorption times (1-420 min), pH values (2.0-6.0) and initial concentrations (0.25-4.0 mmol L^-1) of metal ions on the adsorption amount of heavy metal ions were investigated. The results showed that the hydrogel had a high removal rate of Pb²⁺, Cd²⁺ and Hg²⁺ in aqueous solution. The adsorption of Pb²⁺ was particularly effective. When C₀ = 4.0 mmol L^-1, pH = 6, the equilibrium adsorption amount of Pb²⁺, Cd²⁺ and Hg²⁺ reached 1.49 mmol g^-1, 1.02 mmol L^-1 and 0.94 mmol g^-1, respectively. The chemical structure and morphology of the hydrogels were characterized by FT-IR, EDS, SEM and XPS. The Langmuir model fits well with the adsorption system. The kinetic data suggest the adsorption of Pb²⁺, Cd²⁺ and Hg²⁺ follow the pseudo-first-order model. This indicates that STS-PAA adsorption of three heavy metal ions is monolayer physical adsorption. Thermodynamic analysis shows that the adsorption of Pb²⁺, Cd²⁺ and Hg²⁺ by STS-PAA is an endothermic (ΔH>0) entropy increase (ΔS>0) non-spontaneous reaction.

Poly(sodium acrylate)-Modified Magnetite Nanoparticles for Separation of Heavy Metals from Aqueous Solutions

Two types of magnetite nanoparticles: unmodified (Fe₃O₄ NPs), and modified with poly(sodium acrylate) (Fe₃O₄/PSA NPs) were synthesized by the co-precipitation method and characterized using different techniques: X-ray diffraction (XRD), transmission electron microscopy (TEM), nanoparticle tracking analysis (NTA), Brunauer-Emmett-Teller (BET) adsorption, Fourier-transform infrared spectroscopy (FTIR). Additionally, magnetic properties and the effect of pH on the zeta potential were analyzed for both types of nanoparticles. Magnetites were used as adsorbents for seven heavy metal ions (Zn(II), Cu(II), Ni(II), Cd(II), Pb(II), Cr(III), Cr(VI)) within the pH range of 3-7. Research revealed nanometric particle sizes, a specific surface area of 140-145 m²/g, and superparamagnetic properties of both tested materials. Moreover, the presence of PSA functional groups in modified magnetite was confirmed, which lowered the pH of the isoelectric point. Both types of magnetite were effective metal ion adsorbents, with metal cations more effectively removed on Fe₃O₄/PSA NPs and Cr(VI) anions on Fe₃O₄ NPs. The adsorption of most of the examined cations (performed at pH = 5) can be well described by the Langmuir isotherm model, whereas the adsorption of Cr(VI) ions on modified magnetite correlated better with the Freundlich model. The Dubinin-Radushkevich model confirmed that chemisorption is the predominant process. The adsorption of all metal ions was well-characterized by the pseudo-second-order kinetic model.

Carbon dots for multicolor cell imaging and ultra-sensitive detection of multiple ions in living cells: One Stone for multiple Birds

Given the significant impact of ions on environment pollution and human health, it is urgently needed to establish effective and convenient ion detection approaches, particularly in living cells. In this paper, we constructed multicolor N-doped-carbon dots (mPD-CDs) by facile one-step hydrothermal carbonization of m-phenylenediamine (mPD). mPD-CDs were successfully deployed for multicolor cellular imaging for animal cells, fungi, and bacteria in a wash-free way with high photostability and satisfactory biocompability. Moreover, mPD-CDs can be used as a fluorescent sensing probe for ultrasensitive detection of both iodide ion (I^-) and typical heavy metals such as cadmium (Cd²⁺), copper (Cu²⁺), mercury (Hg²⁺), gadolinium (Gd³⁺), ferrous ion (Fe²⁺), Zinc (Zn²⁺), and ferric ion (Fe³⁺). This is the first report using CDs as optical sensing probe for the detection of Gd³⁺, and for detection of Fe³⁺ with fluorescence "turn on". More significantly, with these versatile and fascinating properties, we applied mPD-CDs for intracellular ion detection in living cells like Hep G2 and S. cerevisiae, and zebra fish. Altogether, mPD-CDs displayed great potential for multicolor cell imaging and the multiple ion detection in vitro and in vivo, presenting a promising strategy for in-situ ultrasensitive sensing of multiple metal ions in the environment and the biological systems.

Sustainable Microbial and Heavy Metal Reduction in Water Purification Systems Based on PVA/IC Nanofiber Membrane Doped with PANI/GO

Effective and efficient removal of both heavy metal pollutants and bacterial contamination from fresh water is an open issue, especially in developing countries. In this work, a novel eco-friendly functional composite for water treatment application was investigated. The composite consisted of electrospun nanofiber membrane from blended polyvinyl alcohol (PVA)/iota carrageenan (IC) polymers doped with equal concentrations of graphene oxide (GO) nanoparticles and polyaniline (PANI). The effectiveness of this composite as a water purification fixed-bed filter was optimized in a batch system for the removal of cadmium (Cd⁺²) and lead (Pb⁺²) ions, and additionally characterized for its antimicrobial and antifungal properties and cytotoxicity effect. The fiber nanocomposite exhibited efficient antibacterial activity, with maximum adsorption capacity of about 459 mg g⁻¹ after 120 min for Cd⁺² and of about 486 mg g⁻¹ after 90 min for Pb⁺². The optimized conditions for removal of both metals were assessed by using a response surface methodology model. The resulting scores at 25 °C were 91.4% (Cd⁺²) removal at 117 min contact time for 89.5 mg L⁻¹ of initial concentration and 29.6 cm² membrane area, and 97.19% (Pb⁺²) removal at contact time 105 min for 83.2 mg L⁻¹ of initial concentration and 30.9 cm² nanofiber composite membrane. Adsorption kinetics and isotherm followed a pseudo-second-order model and Langmuir and Freundlich isotherm model, respectively. The prepared membrane appears to be promising for possible use in domestic water purification systems.

A Survey on Nanotechnology-Based Bioremediation of Wastewater

Rainwater discharge and human impacts produce wastewater, which is a contaminated type of water. Sediments also discharge phosphate into the water column when there is a lack of dissolved oxygen in the water. Through the manufacturing of environmentally benign nanoparticles, nanotechnology may reduce the amount of money spent by enterprises to remediate such contaminants. Because of their improved physiological, biochemical, and biomechanical qualities, nanoparticles are getting prominence. The importance of the global wastewater dilemma is discussed in this survey. The use of nanomaterials in heavy metal remediation (HMR) and wastewater treatment is covered in this survey. This paper also discusses the benefits of nanotechnology over traditional approaches in certain fields. This survey aims to gather together many recent studies on nanoparticle production and their benefits as adsorbents in the remediation of wastewater which have been done so far. The promising role of nanotechnology in wastewater remediation is surveyed in this research, which also discusses recent developments in nanotechnology-mediated remediation methods. This survey examines the vital potential of nanotechnology in wastewater treatment, as well as recent breakthroughs in nanotechnology-mediated treatment systems.

Recent Progress on Nanomaterial-Based Membranes for Water Treatment

Nanomaterials have emerged as the new future generation materials for high-performance water treatment membranes with potential for solving the worldwide water pollution issue. The incorporation of nanomaterials in membranes increases water permeability, mechanical strength, separation efficiency, and reduces fouling of the membrane. Thus, the nanomaterials pave a new pathway for ultra-fast and extremely selective water purification membranes. Membrane enhancements after the inclusion of many nanomaterials, including nanoparticles (NPs), two-dimensional (2-D) layer materials, nanofibers, nanosheets, and other nanocomposite structural materials, are discussed in this review. Furthermore, the applications of these membranes with nanomaterials in water treatment applications, that are vast in number, are highlighted. The goal is to demonstrate the significance of nanomaterials in the membrane industry for water treatment applications. It was found that nanomaterials and nanotechnology offer great potential for the advancement of sustainable water and wastewater treatment.

Heavy Metal Adsorption Using Magnetic Nanoparticles for Water Purification: A Critical Review

Research on contamination of groundwater and drinking water is of major importance. Due to the rapid and significant progress in the last decade in nanotechnology and its potential applications to water purification, such as adsorption of heavy metal ion from contaminated water, a wide number of articles have been published. An evaluating frame of the main findings of recent research on heavy metal removal using magnetic nanoparticles, with emphasis on water quality and method applicability, is presented. A large number of articles have been studied with a focus on the synthesis and characterization procedures for bare and modified magnetic nanoparticles as well as on their adsorption capacity and the corresponding desorption process of the methods are presented. The present review analysis shows that the experimental procedures demonstrate high adsorption capacity for pollutants from aquatic solutions. Moreover, reuse of the employed nanoparticles up to five times leads to an efficiency up to 90%. We must mention also that in some rare occasions, nanoparticles have been reused up to 22 times.

Degradation of Rhodococcus erythropolis SY095 modified with functional magnetic Fe3O4 nanoparticles

Alkali-surfactant-polymer flooding technology is widely employed to extract crude oil to enhance its production. The bacterial strain Rhodococcus erythropolis SY095 has shown high degradation activity of alkane of crude oil. In the past, many treatment strategies have been implemented to reduce oil concentration in wastewater. Previous studies mainly focused on the extracellular products of Erythrococcus rather than its degradation properties. In the current study, we designed an immobilization method to modify the surface of R. erythropolis SY095 with functional Fe₃O₄ nanoparticles (NPs) for biodegradation of crude oil and separation of the immobilized bacteria after degradation. We characterize the synthesized NPs through various methods, including scanning electron microscope energy-dispersive spectrometer, Fourier transform infrared spectroscopy, X-ray diffraction (XRD) and a vibrating sample magnetometer. We found that the size of the synthesized NPs was approximately 100 nm. Our results showed that R. erythropolis SY095 was successfully coated with functional magnetic NPs (MNPs) that could be easily separated from the solution via the application of an external magnetic field. The coated cells had a high tolerance for heavy metals. Our findings demonstrated that the immobilization of MNPs to bacterial surfaces is a promising approach for the degradation of crude oil.

Adsorptive removal of Pb(II) ions onto surface modified adsorbents derived from Cassia fistula seeds: Optimization and modelling study

Cassia fistula seeds has been utilized for the abstraction of Pb(II) ions from the aqueous environment. Raw Cassia fistula seeds (RCF) and three different surface modified (physically treated - PMCF and chemically treated - HMCF and SMCF) adsorbent material were taken for investigation. The adsorption properties of these materials and their contact amongst the Pb(II) ion and sorbent materials were characterized by FTIR and SEM analysis. The parameters influencing the adsorption capacity of varied adsorbents were evaluated: maximum solution pH for Pb(II) is 5.0; interactive time is 30 min; dosage is 8.0 g/L for RCF, 4.0 g/L for HMCF, 2.5 g/L for PMCF and 1.0 g/L for SMCF. The modelling study reveals that Freundlich isotherm and Pseudo first order kinetics fits well and the utmost adsorption measurements for the varied adsorbents were found to be 13.22, 28.28, 48.66 and 129.3 mg/g, respectively.

Synthesis of Magnetic Adsorbents Based Carbon Highly Efficient and Stable for Use in the Removal of Pb(II) and Cd(II) in Aqueous Solution

In this study, two alternative synthesis routes for magnetic adsorbents were evaluated to remove Pb(II) and Cd(II) in an aqueous solution. First, activated carbon was prepared from argan shells (C). One portion was doped with magnetite (Fe₃O₄+C) and the other with cobalt ferrite (CoFe₂O₄+C). Characterization studies showed that C has a high surface area (1635 m² g⁻¹) due to the development of microporosity. For Fe₃O₄+C the magnetic particles were nano-sized and penetrated the material’s texture, saturating the micropores. In contrast, CoFe₂O₄+C conserves the mesoporosity developed because most of the cobalt ferrite particles adhered to the exposed surface of the material. The adsorption capacity for Pb(II) was 389 mg g⁻¹ (1.88 mmol g⁻¹) and 249 mg g⁻¹ (1.20 mmol g⁻¹); while for Cd(II) was 269 mg g⁻¹ (2.39 mmol g⁻¹) and 264 mg g⁻¹ (2.35 mmol g⁻¹) for the Fe₃O₄+C and CoFe₂O₄+C, respectively. The predominant adsorption mechanism is the interaction between -FeOH groups with the cations in the solution, which are the main reason these adsorption capacities remain high in repeated adsorption cycles after regeneration with HNO₃. The results obtained are superior to studies previously reported in the literature, making these new materials a promising alternative for large-scale wastewater treatment processes using batch-type reactors.

Heavy metal pollution and the role of inorganic nanomaterials in environmental remediation

Contamination of water and soil with toxic heavy metals is a major threat to human health. Although extensive work has been performed on reporting heavy metal pollutions globally, there are limited review articles on addressing this pernicious phenomenon. This paper reviews inorganic nanoparticles and provides a framework for their qualities required as good nanoadsorbents for efficient removal of heavy metals from water. Different inorganic nanoparticles including metals, metal oxides and metal sulfides nanoparticles have been applied as nanoadsorbents to successfully treat water with high contaminations of heavy metals at concentrations greater than 100 mg l^-1, achieving high adsorption capacities up to 3449 mg g^-1. It has been identified that the synthesis method, selectivity, stability, regeneration and reusability, and adsorbent separation from solution are critical parameters in deciding on the quality of inorganic nanoadsorbents. Surface functionalized nanoadsorbents were found to possess high selectivity and capacity for heavy metals removal from water even at a very low adsorbent dosage of less than 2 g l^-1, which makes them better than conventional adsorbents in environmental remediation.

Differentiating Nanomaghemite and Nanomagnetite and Discussing Their Importance in Arsenic and Lead Removal from Contaminated Effluents: A Critical Review

Arsenic and lead heavy metals are polluting agents still present in water bodies, including surface (lake, river) and underground waters; consequently, the development of new adsorbents is necessary to uptake these metals with high efficiency, quick and clean removal procedures. Magnetic nanoparticles, prepared with iron-oxides, are excellent candidates to achieve this goal due to their ecofriendly features, high catalytic response, specific surface area, and pulling magnetic response that favors an easy removal. In particular, nanomagnetite and maghemite are often found as the core and primary materials regarding magnetic nanoadsorbents. However, these phases show interesting distinct physical properties (especially in their surface magnetic properties) but are not often studied regarding correlations between the surface properties and adsorption applications, for instance. Thus, in this review, we summarize the main characteristics of the co-precipitation and thermal decomposition methods used to prepare the nano-iron-oxides, being the co-precipitation method most promising for scaling up processes. We specifically highlight the main differences between both nano-oxide species based on conventional techniques, such as X-ray diffraction, zero and in-field Mössbauer spectroscopy, X-ray photoelectron spectroscopy, X-ray absorption spectroscopy, and X-ray magnetic circular dichroism, the latter two techniques performed with synchrotron light. Therefore, we classify the most recent magnetic nanoadsorbents found in the literature for arsenic and lead removal, discussing in detail their advantages and limitations based on various physicochemical parameters, such as temperature, competitive and coexisting ion effects, i.e., considering the simultaneous adsorption removal (heavy metal-heavy metal competition and heavy metal-organic removal), initial concentration, magnetic adsorbent dose, adsorption mechanism based on pH and zeta potential, and real water adsorption experiments. We also discuss the regeneration/recycling properties, after-adsorption physicochemical properties, and the cost evaluation of these magnetic nanoadsorbents, which are important issues, but less discussed in the literature.

Facile synthesis and characterization of polypyrrole - iron oxide - seaweed (PPy-Fe3O4-SW) nanocomposite and its exploration for adsorptive removal of Pb(II) from heavy metal bearing water

Lead is a widely used heavy metal which is highly toxic to kidney, nervous system and reproductive system. A special featured polypyrrole based adsorbent, with admirable salinity confrontation, environmental stability and reusability, was engaged to remove lead ions from aqueous solution. The advantages of using polypyrrole based adsorbent for heavy metal removal are: ease of synthesis, biocompatibility and high metal selectivity. In this study, polypyrrole - iron oxide - seaweed nanocomposite was proposed to remove lead ions from aqueous solution. A new method was adopted for the synthesis of polypyrrole - iron oxide - seaweed nanocomposite. The nanocomposite was prepared within a short time using ultra-assisted polymerization technique. The synthesized nanocomposite adsorbent was characterized using FTIR, SEM, TEM, EDS, XRD, XPS and zeta potential analysis. The adsorption capability of polypyrrole - iron oxide - seaweed nanocomposite towards lead was explored. The influence of pH, contact time, adsorbent dosage, metal ion concentration and recyclability were investigated. The optimum condition of these parameters was found to be: pH- 5, temperature - 40 °C, initial concentration - 100 mg/L and contact time - 20 min and the results showed that the hybrid composite adsorbed 97.25% Pb (II). Different isotherms such as Langmuir, Freundlich, Temkin and D-R models were also studied for the adsorption of Pb ions. The kinetics of the adsorption process was examined by I order, II order and intra particle diffusion kinetic models. The mechanism of lead adsorption onto the nanocomposite was also explored.

Thiol-methyl-modified magnetic microspheres for effective cadmium (II) removal from polluted water

For effective removal of cadmium (II) (Cd(II)) from polluted water, a magnetic adsorbent of Fe₃O₄@SiO₂ core-shell microspheres modified with methyl-protected thiol groups (Fe₃O₄@SiO₂-SH-Protected) was synthesized and characterized by scanning electron, transmission electron, energy dispersive X-ray spectroscopy, Fourier transform infrared spectroscopies, as well as X-ray diffraction, Raman spectroscopy, and magnetic measurements. Characterization results showed that thiol groups on the surface of Fe₃O₄@SiO₂ material were protected to avoid disulfide formation. Batch adsorption experiments were conducted by varying the contact time, initial pH, solid-liquid ratio, temperature, Cd(II) concentrations, and interfering cations. Fe₃O₄@SiO₂-SH-Protected material exhibited much higher adsorption capacity than Unprotected forms and other adsorbents due to methyl group protection. The maximum adsorption capacity calculated from the Langmuir fitting was 27.5 mg·g^-1 (pH 7, 25 °C), and the adsorption kinetics followed a pseudo-second-order model, and adsorption mainly dominated by film diffusion processes. Thermodynamic parameters indicated that the adsorption process was a spontaneous, endothermic, and positive entropic process. Cd(II)-loaded on the adsorbent was easily desorbed with 0.1 M HCl and the adsorbent stable in 0.1 M HCl for long times, showing good reusability and stability.

Scalable synthesis of monodisperse and recyclable sulphonated polystyrene microspheres for sustainable elimination of heavy metals in wastewater

Herein, we demonstrate a scalable method for fabricating monodisperse sulphonated polystyrene (SPS) microspheres with abundant sulphonic acid groups and excellent heavy metal removal ability. A comprehensive characterization through SEM, EDS, FT-IR, TG, XRD and XPS confirmed the formation of the SPS microspheres. Take advantage of the abundant sulphonic acid groups on the surface of microspheres, as well as the superior monodisperse properties, adsorption ability of SPS microspheres both in quantity and speed have been enhanced. The adsorption equilibrium obeyed the Langmuir isotherm model with the theoretical maximum capacities of 49.16, 15.38 and 13.89 mg·g-1 for Pb2+, Zn2+ and Cu2+, respectively (30°C, pH = 3.5). Besides, the adsorption equilibriums of Pb2+ onto SPS microspheres can be achieved within only 1 min and the adsorption kinetics can be fitted by a pseudo-second-order kinetics model. More importantly, because of the micron structure of the SPS microspheres, it could overcome the excessive hydrophilia brought by rich sulphonic acid groups and thereby easily separated, which maintain a good recyclable capacity after five regeneration cycles. With the excellent adsorption ability and reusability, SPS microspheres can efficiently handle the polluted water in a convenience and rapid process, which satisfies the sustainable pollution treatment in heavy metals elimination.

Binary coagulation system (graphene oxide/chitosan) for polluted surface water treatment

In this study, chitosan (CS) is used as a natural coagulant aid alongside graphene oxide (GO) to remove turbidity and numerous pollutants from raw and artificially contaminated surface water. The coagulation capability of the system (GO/CS) was assessed with respect to a water sample's turbidity, pH, coagulant dose, settling velocity, and temperature. The presence of CS enhanced the coagulation capacity of GO at varied pH levels and no GO residue was detected in the water after the treatment. The proposed system achieved high turbidity removal efficiency (≥98.3%) for all turbidity levels. A mixture of GO (8 mg/L) and CS (2 mg/L) was ideal to remove algae (99.5%) and bacteria (≥95.0%). Furthermore, it demonstrated a high coagulation capacity to remove dyes, direct brown-2 (DB-2), methylene blue (MB), and Pb(II) ions from artificially contaminated surface water. Interestingly, the sludge exhibited an extraordinary adsorption capacity for DB-2, MB, and Pb(II) ions. The adsorption process followed the pseudo-second-order kinetic model, and was consistent with the Langmuir model, with an adsorption capacity of up to 667.8, 400.7, and 459.1 mg/g for DB-2, MB, and Pb(II) ions, respectively. Therefore, the presented binary coagulation system is of great potential economic value for the treatment of raw surface water and wastewater.

The use of Phanerochaete chrysosporium for modification of bentonite for preconcentration and determination of heavy metals

In this study, a solid phase extraction method was successfully applied in the preconcentration and determination of trace levels of Cu(II) and Cd(II) ions and Phanerochaete chrysosporium (white rot fungus) modified bentonite was used as adsorbent. After the biosorption of Cu(II) and Cd(II) ions, metal concentrations in the samples were determined by atomic absorption spectrophotometry. pH, adsorbent amount, eluent type, sample volume, and flow rate, which are effective in the adsorption of metal ions, have been studied. 1 M HCl was used for desorption of these metal ions retained (recovery 95–100%). In addition, the effect of interfered ions has also been investigated. Sorption data were examined according to Langmuir and Freundlich adsorption equations. The results obtained show that the applied method has a high metal biosorption capacity, and Cu(II) and Cd(II) ions are successfully recovered. It was also successful in applying the proposed enrichment method to real water samples.

Recovery values between 92.3% and 97.3% were obtained for the studied metal ions. According to the results, the proposed method can be successfully applied to water analysis at 95% confidence interval.

Prediction of lead (Pb) adsorption on attapulgite clay using the feasibility of data intelligence models

This study investigates the performance of support vector machine (SVM), multivariate adaptive regression spline (MARS), and random forest (RF) models for predicting the lead (Pb) adsorption by attapulgite clay. Models are constructed using batch stochastic data of heavy metal (HM) concentrations under different physicochemical conditions. Implementation of auto-hyper-parameter tuning using grid-search approach and comparative analysis is performed against the benchmark artificial intelligence (AI) models. Models are constructed based on Pb concentration (IC), the dosage of attapulgite clay (dose), contact time (CT), pH, and NaNO3 (SN). Principle component analysis (PCA) and correlation analysis (CA) methods are integrated to assess the importance of the applied predictors and their relationship with the target. Research findings approved the potential of the grid-RF model as a marginal superior predictive model against the grid-SVM in terms of MAE, i.e., 3.29 and 3.34, respectively; moreover, the md scored the same, i.e., 0.93, which reveals the potential predictability for both. Nonetheless, grid-MARS and standalone MARS models remained likewise in their predictability. IC parameter demonstrated the highest influential among all the predictors with the highest value of importance in the case of all three evaluators. The solution pH and dose stands together with marginal differences in case of PCA method; however, solution pH and CT appeared with similarity impact using the PCA method.

Rational design of solid-acid catalysts for cellulose hydrolysis using colloidal theory

Solid-acid catalysts functionalized with catalytic groups have attracted intense interest for converting cellulose into soluble products. However, design of solid-7 acid catalysts has been guided by molecular level interactions and the actual mechanism of cellulose-solid-acid catalyst particles adsorption remains unknown. Here, colloidal stability theory, DLVO, is used to rationalize the design of solid acids for targeted cellulose adsorption. In nearly all cases, an energy barrier, arising from electrostatic repulsion and much larger than the energy associated with thermal fluctuations, prevents close contact between the solid acid and cellulose. Polymer-based solid-acid substrates such as polystyrene and Nafion are especially ineffective as their interaction with cellulose is dominated by the repulsive electrostatic force. Carbon and metal oxides have potential to be effective for cellulose-solid-acid interaction as their attractive van der Waals interaction can offset the repulsive electrostatic interaction. The effects of reactor temperature and shear force were evaluated, with the finding that reactor temperature can minimize the catalyst-cellulose interaction barrier, promoting coagulation, but that the shear force in a typical laboratory reactor cannot. We have evaluated strategies for enhancing cellulose-catalyst interaction and conclude that raising reaction temperature or synthesizing acid/base bifunctional catalysts can effectively diminish electrostatic repulsion and promote cellulose-catalyst coagulation. The analysis presented here establishes a rational method for designing solid acid catalysts for cellulose hydrolysis.

Carbon Nanodots Embedded on a Polyethersulfone Membrane for Cadmium(II) Removal from Water

Cadmium(II) is a toxic heavy metal in aquatic systems. As a potential solution, green carbon nanodots (CNDs) were synthesized from oats and embedded on polyethersulfone membrane (PES) via phase inversion for the adsorption of Cd2+ from water. Characterization techniques for the CNDs and PES membranes were transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), Raman spectroscopy, atomic force microscopy (AFM), contact angle and a pure water flux assessment system operated at 300 kPa. TEM results showed that the CNDs were well dispersed with a uniform shape and size (6.7 ± 2.8 nm). Raman spectroscopy revealed that the CNDs were embedded on the PES and the ID/IG ratio slightly increased, showing that the membranes maintained good structural integrity.The CNDs/PES proved to be more hydrophilic than PES. The glassy carbon electrode (GCE) in anodic stripping voltammetry (ASV) technique detected 99.78% Cd2+ removal by 0.5% CNDs/PES at optimum conditions: 30 min. contact time, at pH 5 and 0.5 ppm Cd2+ solution. The 0.5% CNDs/PES removed Cd(II) due to the hydroxyl group (-OH) and carboxyl group (-COO-) on the membrane composite. It was established that Cu2+ and Pb2+ have a significant interfering effect during the analysis of Cd2+ using GCE in ASV technique. The 0.5% CNDs/PES is recyclable because it removed above 95% of cd2+ in four cycles. In a spiked tap water sample, 58.38% of Cd2+ was sensed by GCE of which 95% was in agreement with the value obtained from inductively coupled plasma optical emission spectrometry (ICPOES).

Cd(II) and Pb(II) Adsorption Using a Composite Obtained from Moringa oleifera Lam. Cellulose Nanofibrils Impregnated with Iron Nanoparticles

This work informs on the green synthesis of a novel adsorbent and its adsorption capacity. The adsorbent was synthesized by the combination of iron nanoparticles and cellulose nanofibers (FeNPs/NFCs). Cellulose nanofibers (NFCs) were obtained from Moringa (Moringa oleifera Lam.) by a pulping Kraft process, acid hydrolysis, and ultrasonic methods. The adsorption method has advantages such as high heavy metal removal in water treatment. Therefore, cadmium (Cd) and lead (Pb) adsorption with FeNP/NFC from aqueous solutions in batch systems was investigated. The kinetic, isotherm, and thermodynamic parameters, as well as the adsorption capacities of FeNP/NFC in each system at different temperatures, were evaluated. The adsorption kinetic data were fitted to mathematical models, so the pseudo-second-order kinetic model described both Cd and Pb. The kinetic rate constant (K2), was higher for Cd than for Pb, indicating that the metal adsorption was very fast. The adsorption isotherm data were best described by the Langmuir–Freundlich model for Pb multilayer adsorption. The Langmuir model described Cd monolayer sorption. However, experimental maximum adsorption capacities (qe exp) for Cd (>12 mg/g) were lower than those for Pb (>80 mg/g). In conclusion, iron nanoparticles on the FeNP/NFC composite improved Cd and Pb selectivity during adsorption processes, indicating the process’ spontaneous and exothermic nature.

Green synthesis of nano-Al2O3, recent functionalization, and fabrication of synthetic or natural polymer nanocomposites: various technological applications

Environmentally friendly fabrication of nano-Al₂O₃, recent functionalization, and preparation of polymer nanocomposites including natural and man-made polymers with various industrial applications are reviewed.