Removal of hydrophobic organic pollutants from soil washing/flushing solutions: A critical review

Challenges and opportunities for large-scale applications of the electro-Fenton process

As an electrochemical advanced oxidation process, the electro-Fenton (EF) process has gained significant importance in the treatment of wastewater and persistent organic pollutants in recent years. As recently reported in a bibliometric analysis, the number of scientific publications on EF have increased exponentially since 2002, reaching nearly 500 articles published in 2022 (Deng et al., 2022). The influence of the main operating parameters has been thoroughly investigated for optimization purposes, such as type of electrode materials, reactor design, current density, and type and concentration of catalyst. Even though most of the studies have been conducted at a laboratory scale, focusing on fundamental aspects and their applications to degrade specific pollutants and treat real wastewater, important large-scale attempts have also been made. This review presents and discusses the most recent advances of the EF process with special emphasis on the aspects more closely related to future implementations at the large scale, such as applications to treat real effluents (industrial and municipal wastewaters) and soil remediation, development of large-scale reactors, costs and effectiveness evaluation, and life cycle assessment. Opportunities and perspectives related to the heterogeneous EF process for real applications are also discussed. This review article aims to be a critical and exhaustive overview of the most recent developments for large-scale applications, which seeks to arouse the interest of a large scientific community and boost the development of EF systems in real environments.

Ultrasound-Assisted Advanced Oxidation Process Using Perovskite-Type LaMnO3 Nanospheres

Among the perovskite oxide community, La-based perovskites have garnered considerable interest due to their remarkable properties including catalytic, electrocatalytic, photocatalytic, sensing, electrical, magnetic, and optical characteristics. Herein, rhodamine-B (RB) dye has been reported to be sono-catalytically decomposed by an ultrasound-assisted advanced oxidation process (AOP) using perovskite-type LaMnO3 (LMO) nanospheres synthesized via ultrasonic approach. Several physiochemical characterizations such as XRD, FT-IR, XPS, SEM, TEM, and SEM-EDS investigations were used to investigate the LMO perovskite nanospheres. Then, LMO potential for adsorption and the sonocatalytic decolorization of RB dye in an aqueous solution are examined. With LMO perovskites, the adsorption and removal kinetics of RB correspond to the pseudo-first-order model. Furthermore, by utilizing the pseudo-first-order, the RB dye process is removed with improved efficacy in the following sequence: Agitation alone: 3.76×10-4 min-1 Collapse

Key Words

• Adsorption
• Degradation
• Pseudo-first-order kinetics
• Rhodamine-B dye
• Scavenger
• Ultrasonication

Collapse

MESH Headings Collapse

Grants

• SPARC/2018-2019/P236/SL SPARC

Collapse

Affiliation(s)

Madappa C Maridevaru Nanomaterials & Solar Energy Conversion Lab, Department of Chemistry, National Institute of Technology, Tiruchirappalli, 620015, India Department of Chemistry, College of Science, Sultan Qaboos University, P.O. Box- 36, P.C. 9 123, Al-Khoudh, Muscat, Oman
Reshma Kaimal Nanomaterials & Solar Energy Conversion Lab, Department of Chemistry, National Institute of Technology, Tiruchirappalli, 620015, India
Rengaraj Selvaraj Department of Chemistry, College of Science, Sultan Qaboos University, P.O. Box- 36, P.C. 9 123, Al-Khoudh, Muscat, Oman
Abdullah Al Souwaileh Department of Chemistry, College of Science, King Saud University, Riyadh, 11451, Saudi Arabia
Ming Xuan Sun School of Materials Engineering, Shanghai University of Engineering Science, Shanghai, 201620, China
Sambandam Anandan Nanomaterials & Solar Energy Conversion Lab, Department of Chemistry, National Institute of Technology, Tiruchirappalli, 620015, India
Muthupandian Ashokkumar School of Chemistry, University of Melbourne, Melbourne, Vic, 3010, Australia

Collapse

Remediation of per- and polyfluoroalkyl substances (PFAS) contaminated soil via soil washing with various water-organic solvent

The feasibility of soil washing for remediating PFAS-contaminated clay soil using various water-organic solvents was systematically investigated based on the combination of batch and column tests. Batch tests using 22 types of solvents highlighted that 0 % (water) and 5 % solvents could effectively extract PFCAs (≤ C9), while long-chain PFCAs (≥ C10) and PFSAs required 80 % solvents for optimal extraction, with efficiency in the order of EtOH ≤ MeOH < Acetonitrile (ACN), suggesting a strong correlation with carbon chain lengths and functional head groups. Column tests with six selected washing solutions indicated rapid desorption of PFOA and PFOS initially, peaking at liquid-to-solid (L/S) ratios of 3-4 for 0 % and 5 % solutions, and at an L/S ratio of 1 for 80 % solutions. To remediate 1 kg-dry soil to meet the legislatively permissible levels for groundwater in Japan (PFOA + PFOS < 50 ng/L), 11 L of 0 % solution (water) or 5 L of 80 % ACN are required for washing out PFOA, while 62 L of 0 % solution (water) or 53 L of 80 % ACN for PFOS. Future research should address the treatment of PFAS-rich wastewater generated from washing PFAS-contaminated soils and the impacts of washing solutions on soil.

Degradation and regeneration inhibition of PCDD/Fs in incineration fly ash by low-temperature thermal technology

Low-temperature thermal degradation of PCDD/Fs for incineration fly ash (IFA), as a novel and emerging technology approach, offers promising features of high degradation efficiency and low energy consumption, presenting enormous potential for application in IFA resource utilization processes. This review summarizes the concentrations, congener distributions, and heterogeneity characteristics of PCDD/Fs in IFA from municipal, medical, and hazardous waste incineration. A comparative analysis of five PCDD/Fs degradation technologies is conducted regarding their characteristics, industrial potential, and applicability. From the perspective of low-temperature degradation mechanisms, pathways to enhance PCDD/Fs degradation efficiency and inhibit their regeneration reactions are discussed in detail. Finally, the challenges to achieve low-temperature degradation of PCDD/Fs for IFA with high-efficiency are prospected. This review seeks to explore new opportunities for the detoxification and resource utilization of IFA by implementing more efficient and viable low-temperature degradation technologies.

Phenanthrene removal from soil washing eluent by Bacillus subtilis embedded in alginate-carboxymethyl cellulose-diatomite beads

The processes of surfactant-enhanced soil washing have been widely applied to the remediation of polycyclic aromatic hydrocarbon (PAH)-contaminated soil, accompanied by the production of soil washing eluent. In this study, novel composite materials of beads containing alginate, carboxymethyl cellulose and diatomite (SCD) were used to encapsulate Bacillus subtilis to remove phenanthrene (PHE) from simulated soil washing eluent with rhamnolipid. The effects of dosage, pH and temperature on the PHE removal performance were explored, and the optimal PHE removal conditions [SCD bead dose 16.2% (w:v), pH 7.1 and 30.6°C] were determined using response surface methodology. After incubation in simulated soil washing eluent for 7 d, SCD beads removed 84.92% of PHE, which was 49.18% higher than by free bacteria. In addition, SCD beads mainly removed PHE through biodegradation processes, and the degradation rate (1.38 mg L-1 d-1) was higher than that of free bacteria (0.64 mg L-1 d-1). Characterization results revealed that the immobilized substrate provided the micro-environment for bacteria and reduced the intense effect of high rhamnolipid concentration. Reusability results showed that SCD beads could be recycled four times to remove 80.05% of PHE. Collectively, SCD beads have great prospects for the decontamination of soil-washing eluent containing complex components.

Adapting nature's own solution: The effect of rhamnolipid and lytic bacteriophage cocktail on enteric pathogens that proliferate in mucilage

The mucilage event witnessed in the Sea of Marmara in 2021 has emerged as a prominent environmental concern, capturing public attention due to its detrimental effects on ecological, economic, and aesthetic dimensions. Addressing the multifaceted impacts of mucilage demands a nature-centric scientific approach, given its global ramifications spanning economy, public health, international relations, and tourism. Consequently, this study sought to explore alternative approaches for the removal of pathogenic enteric bacteria associated with mucilage occurrences, diverging from conventional methodologies. Specifically, the primary objective was to assess the efficacy of rhamnolipid and a bacteriophage cocktail in mitigating the proliferation of enteric pathogens within mucilaginous environments. During the study, 91 phage isolations were obtained from 45 water samples taken and 10 phages were selected for the broad host range and because of the efficacy tests, a phage cocktail was created with 5 phages. It was found that the mixture of rhamnolipid, phage cocktail and rhamnolipid-phage cocktail reduced bacterial load by 7-9 log10, 9-12 log10 and 9-11 log10 respectively under laboratory conditions. When the study was carried out in seawater, reductions of 4-5 log10, 3 log10 and 4 log10 were achieved. This study has shown that the combined use of rhamnolipid, phage cocktail and rhamnolipid-phage cocktail can be considered as the most effective natural solution proposal for reducing bacterial load, both in laboratory conditions and in sea surface water.

Sustainable lindane waste remediation: Surfactant-driven residual DNAPL extraction and oxidation in a real landfill (LIFE SURFING)

The LIFE SURFING Project was carried out at the Bailin Landfill in Sabiñánigo, Spain (2020-2022), applying Surfactant Enhanced Aquifer Remediation (SEAR) and In Situ Chemical Oxidation (S-ISCO) in a 60-meter test cell beneath the old landfill, to remediate a contaminated aquifer with dense non-aqueous phase liquid (DNAPL) from nearby lindane production. The project overcame traditional extraction limitations, successfully preventing groundwater pollution from reaching the river. In spring 2022, two SEAR interventions involved the injection of 9.3 m3 (SEAR-1) and 6 m3 (SEAR-2) of aqueous solutions containing 20 g/L of the non-ionic surfactant E-Mulse 3®, with bromide (around 150 mg/L) serving as a conservative tracer. 7.1 and 6.0 m3 were extracted in SEAR-1 and SEAR-2, respectively, recovered 60-70 % of the injected bromide and 30-40 % of the surfactant, confirming surfactant adsorption by the soil. Approximately 130 kg of DNAPL were removed, with over 90 % mobilized and 10 % solubilized. A surfactant-to-DNAPL recovery mass ratio of 2.6 was obtained, a successful value for a fractured aquifer. In September 2022, the S-ISCO phase entailed injecting 22 m3 of a solution containing persulfate (40 g/L), E-Mulse 3® (4 g/L), and NaOH (8.75 g/L) in pulses over 48 h, oxidizing around 20 kg of DNAPL and ensuring low toxicity levels after that. Preceding the SEAR and S-ISCO trials, 2020 and 2021 were dedicated to detailed groundwater flow characterizations, including hydrological and tracer studies. These preliminary investigations allowed the design of a barrier zone between 317 and 557 m from the test cell and the river, situated 900 m away. This zone, integrating alkali dosing, aeration, vapor extraction, and oxidant injection, effectively prevented the escape of fluids to the river. Neither surfactants nor contaminants were detected in river waters post-treatment. The absence of residual phase in test cell wells and reduction of chlorinated compound levels in groundwater were noticed till one year after S-ISCO.

2D model of groundwater flow and total dissolved HCH transport through the Gállego alluvial aquifer downstream the Sardas landfill (Huesca, Spain)

The organic pollutants disposed at the Sardas landfill in Sabiñánigo (Huesca, northeastern Spain) by the INQUINOSA lindane factory have reached the Gállego alluvial aquifer and could affect the Sabiñánigo reservoir. The daily oscillations of the reservoir water level produce a tidal effect on the piezometric heads of the aquifer. These oscillations are transmitted in a damped way with a time lag, thus attesting that the silting sediments of the reservoir and the natural silts of the Gállego alluvial are interposed between the reservoir water and the layer of sands and gravels. A 2D finite element groundwater flow and total dissolved hexachlorocyclohexane (HCH) transport model through the Gállego alluvial aquifer is presented here. The flow model was constructed to: (1) Quantify the tidal effect, produced by the daily fluctuations of the reservoir water level on the aquifer; (2) Estimate the hydrodynamic parameters of the layer of sands and gravels; and 3) Estimate the vertical hydraulic conductivity of the silting sediments and silts; and (4) Quantify aquifer/reservoir interactions. The flow model reproduces the dynamics of the tidal effect and attests that groundwater velocity and flow direction changes daily in response to the oscillations of the reservoir level. Model results reproduce the measured well hydrographs and the Darcy velocity derived from tracer tests and confirm the validity of the conceptual model. The transport model of total dissolved HCH simulates the time evolution of the contaminant plume. The computed concentrations of total dissolved HCH and the contaminant mass outflux are very sensitive to changes in the source terms and the distribution coefficient, Kd of HCH. The best fit to the measured HCH plumes in September 2010 and December 2020 is obtained with a Kd ranging from 1 to 3 L/kg. The computed flux of dissolved HCH leaving the Sardas site in 2020 towards the Sabiñánigo reservoir ranges from 0.6 kg/year for Kd = 3 L/kg to 3.1 kg/year for Kd = 1 L/kg. The findings of this study will be most useful for planning and designing remedial and containment actions at the Sardas site and other similar lindane-affected sites.

An assessment of metal absorption competence of indigenous metal tolerant bacterial species- an in-vitro study

Heavy metals pose a serious global threat to the environment. Hence, removing hazardous metals from soil samples has become complicated over the past few years. The current work looked into the remediation of heavy metals from aqueous solutions using a bacterial community and a unique bacterium obtained from metal-contaminated soil. In this investigation, the isolates of Bacillus anthracis A1-7, Bacillus. thuringiensis A1-3, Bacillus. cereus A1-5, and Pseudomonas aeruginosa A-33 actively demonstrated metal tolerances to various tested metals. Furthermore, an in-vitro biosorption study was performed under ideal concentration. The bacterial consortia achieved the highest biosorption effectiveness for Cu & Zn, 92.7% and 90.3%, respectively. When compared with a single bacterium, the group exhibited inferior Pb biosorption (86%). Since then, P. aeruginosa A33 has had the highest Pb biosorption. Finally, a bacterial consortium has devised an intriguing strategy for eliminating Cu and Pb from the polluted medium. P. aeruginosa A33 was found to be a mighty microbe that extracts Zn from polluted water. This metal-tolerant bacterium also exhibited specific proportions of selective commercially available antibiotics, which were analyzed using the Multiple Antibiotic Resistance (MAR) Index. In conclusion, these findings indicated that bacterial consortia composed of four bacterial isolates can remove metals from a metal-polluted medium.

Nonionic surfactant Tween 80-facilitated bacterial transport in porous media: A nonmonotonic concentration-dependent performance, mechanism, and machine learning prediction

The surfactant-enhanced bioremediation (SEBR) of organic-contaminated soil is a promising soil remediation technology, in which surfactants not only mobilize pollutants, but also alter the mobility of bacteria. However, the bacterial response and underlying mechanisms remain unclear. In this study, the effects and mechanisms of action of a selected nonionic surfactant (Tween 80) on Pseudomonas aeruginosa transport in soil and quartz sand were investigated. The results showed that bacterial migration in both quartz sand and soil was significantly enhanced with increasing Tween 80 concentration, and the greatest migration occurred at a critical micelle concentration (CMC) of 4 for quartz sand and 30 for soil, with increases of 185.2% and 27.3%, respectively. The experimental results and theoretical analysis indicated that Tween 80-facilitated bacterial migration could be mainly attributed to competition for soil/sand surface sorption sites between Tween 80 and bacteria. The prior sorption of Tween 80 onto sand/soil could diminish the available sorption sites for P. aeruginosa, resulting in significant decreases in deposition parameters (70.8% and 33.3% decrease in KD in sand and soil systems, respectively), thereby increasing bacterial transport. In the bacterial post-sorption scenario, the subsequent injection of Tween 80 washed out 69.8% of the bacteria retained in the quartz sand owing to the competition of Tween 80 with pre-sorbed bacteria, as compared with almost no bacteria being eluted by NaCl solution. Several machine learning models have been employed to predict Tween 80-faciliated bacterial transport. The results showed that back-propagation neural network (BPNN)-based machine learning could predict the transport of P. aeruginosa through quartz sand with Tween 80 in-sample (2 CMC) and out-of-sample (10 CMC) with errors of 0.79% and 3.77%, respectively. This study sheds light on the full understanding of SEBR from the viewpoint of degrader facilitation.

Animal waste as a valuable biosorbent in the removal of heavy metals from aquatic ecosystem-an eco-friendly approach

Toxic pollutants in the form of heavy metals are added through various anthropogenic activities daily into the aquatic ecosystem beyond their permissible limits, and their bioaccumulation capacity makes them hazardous substances for the survival of all organisms. Thus, their removal from aquatic ecosystems is the need of the hour. Treatment of wastewater containing heavy metals through biosorption is gaining popularity and is being explored all around the world due to its various advantages over conventional methods of treatment. Utilization of animal waste as a biomaterial could be the best solution to remove it from the ecosystem. Such treatment methods are a blessing for developing and underdeveloped countries due to their low cost. This paper provides in-depth details about heavy metals, their health implications, mechanisms of toxicity, modes of transportation, and conventional treatment approaches. A comprehensive understanding of the biosorption process, encompassing its world scenario, evolution, mechanisms, factors affecting the process, and advantages, will also be covered. Finally, animal wastes and their applicability in the removal of heavy metal pollutants from wastewater shall also be thoroughly reviewed, followed by their future utility and recommendations.

New insights into interaction between oil and solid during hydrothermal treatment of oily sludge

Hydrothermal treatment (HT) can effectively dehydrate and reduce oily sludge (OS) volume, but the resulting hydrothermal oily sludge (HOS) presents greater challenges for washing than the initial oily sludge (IOS). This study examines the effects of HT on OS by analyzing changes in water, oil, and solid. Results indicate that HT considerably decreases the water content in OS while increasing resin and asphaltenes contents. In addition, condensation, side-chain scission, and oxidation reactions occur during the HT process, resulting in coking, agglomeration, and an increase in oxygen-containing groups. This increase, further confirmed by X-ray photoelectron spectroscopy (XPS), enhances the interaction between oil and solids. Calcite, the most prevalent solid-phase component, may form a calcium bridge with the oxygen-containing groups. Moreover, HT reduces the solid particle size, thereby increasing the oil-solid contact area. Interestingly, the process of deasphalting diminishes the interaction between oil and solids, facilitating sludge washing. After washing, the residual oil content in HOS is reduced to less than 0.34%. This study elucidates why HOS is challenging to separate from oil and solids and introduces a novel method that combines dodecylbenzene sulfonic acid (DBSA)-assisted heptane deasphalting with conventional washing techniques. This method shows promise for applications in OS affected by weathering processes.

Effect of cations on monochlorobenzene adsorption onto bentonite at the coexistence of Tween 80

The effect of several prevalent cations (including Na+, K+, Mg2+, Ca2+, Al3+, and Fe3+) on the adsorption of monochlorobenzene (MCB) onto bentonite was investigated at the coexistence of nonionic surfactant Tween 80 (T80) in surfactant-enhanced remediation (SER). They are all favorable for MCB and T80 adsorption, especially Mg2+ and Ca2+. Adsorption of MCB is strongly depended on T80 micelles. When its concentration exceeds the solubility, MCB is easier to bind with T80 micelles and be adsorbed by bentonite. Acidic environment can facilitate MCB and T80 adsorption, but the effect of cations on the adsorption is most significant under alkaline conditions. Adsorption capacity of MCB increases first followed by a slight decrease with increasing cations concentrations. The maximum adsorption rate of MCB determined is about 68.4% in a solution containing Mg2+ in the isothermal adsorption of MCB, while it is only 6.8% in a cation-free solution. Various characterizations showed that cations mainly changed the repulsion between bentonite particles and T80 micelles and the agglomeration and structure of bentonite, thus affecting the adsorption of MCB and T80 micelles. Our research demonstrated the nonnegligible promotion of MCB adsorption on bentonite by cations and acidic environment, which will adversely affect SER efficiency.

In vitro and in vivo screening of bacterial species from contaminated soil for heavy metal biotransformation activity

Heavy metals (HMs) are widely used in various industries. High concentrations of HMs can be severely toxic to plants, animals and humans. Microorganism-based bioremediation has shown significant potential in degrading and detoxifying specific HM contaminants. In this study, we cultivated a range of bacterial strains in liquid and solid nutrient medium containing different concentrations of different HMs to select and analyze bacteria capable of transforming HMs. The bacterial strains most resistant to selected HMs and exhibiting the ability to remove HMs from contaminated soils were identified. Then, the bacterial species capable of utilizing HMs in soil model experiments were selected, and their ability to transform HMs was evaluated. This study has also generated preliminary findings on the use of plants for further removal of HMs from soil after microbial bioremediation. Alcaligenes faecalis, Delftia tsuruhatensis and Stenotrophomonas sp. were selected for their ability to grow in and utilize HM ions at the maximum permissible concentration (MPC) and two times the MPC. Lysinibacillus fusiformis (local microflora) can be used as a universal biotransformation tool for many HM ions. Brevibacillus parabrevis has potential for the removal of lead ions, and Brevibacillus reuszeri and Bacillus safensis have potential for the removal of arsenic ions from the environment. The bacterial species have been selected for bioremediation to remove heavy metal ions from the environment.

Mechanisms of benzene and benzo[a]pyrene biodegradation in the individually and mixed contaminated soils

There is a lack of knowledge on the biodegradation mechanisms of benzene and benzo [a]pyrene (BaP), representative compounds of polycyclic aromatic hydrocarbons (PAHs), and benzene, toluene, ethylbenzene, and xylene (BTEX), under individually and mixed contaminated soils. Therefore, a set of microcosm experiments were conducted to explore the influence of benzene and BaP on biodegradation under individual and mixed contaminated condition, and their subsequent influence on native microbial consortium. The results revealed that the total mass loss of benzene was 56.0% under benzene and BaP mixed contamination, which was less than that of individual benzene contamination (78.3%). On the other hand, the mass loss of BaP was slightly boosted to 17.6% under the condition of benzene mixed contamination with BaP from that of individual BaP contamination (14.4%). The significant differences between the microbial and biocide treatments for both benzene and BaP removal demonstrated that microbial degradation played a crucial role in the mass loss for both contaminants. In addition, the microbial analyses revealed that the contamination of benzene played a major role in the fluctuations of microbial compositions under co-contaminated conditions. Rhodococcus, Nocardioides, Gailla, and norank_c_Gitt-GS-136 performed a major role in benzene biodegradation under individual and mixed contaminated conditions while Rhodococcus, Noviherbaspirillum, and Phenylobacterium were highly involved in BaP biodegradation. Moreover, binary benzene and BaP contamination highly reduced the Rhodococcus abundance, indicating the toxic influence of co-contamination on the functional key genus. Enzymatic activities revealed that catalase, lipase, and dehydrogenase activities proliferated while polyphenol oxidase was reduced with contamination compared to the control treatment. These results provided the fundamental information to facilitate the development of more efficient bioremediation strategies, which can be tailored to specific remediation of different contamination scenarios.

Emerging organic contaminants in the soil-plant-receptor continuum: transport, fate, health risks, and removal mechanisms

There is a lack of comprehensive reviews tracking emerging organic contaminants (EOCs) within the soil-plant continuum using the source-pathway-receptor-impact-mitigation (SPRIM) framework. Therefore, this review examines existing literature to gain insights into the occurrence, behaviour, fate, health hazards, and strategies for mitigating EOCs within the soil-plant system. EOCs identified in the soil-plant system encompass endocrine-disrupting chemicals, surfactants, pharmaceuticals, personal care products, plasticizers, gasoline additives, flame retardants, and per- and poly-fluoroalkyl substances (PFAS). Sources of EOCs in the soil-plant system include the land application of biosolids, wastewater, and solid wastes rich in EOCs. However, less-studied sources encompass plastics and atmospheric deposition. EOCs are transported from their sources to the soil-plant system and other receptors through human activities, wind-driven processes, and hydrological pathways. The behaviour, persistence, and fate of EOCs within the soil-plant system are discussed, including sorption, degradation, phase partitioning, (bio)transformation, biouptake, translocation, and bioaccumulation in plants. Factors governing the behaviour, persistence, and fate of EOCs in the soil-plant system include pH, redox potential, texture, temperature, and soil organic matter content. The review also discusses the environmental receptors of EOCs, including their exchange with other environmental compartments (aquatic and atmospheric), and interactions with soil organisms. The ecological health risks, human exposure via inhalation of particulate matter and consumption of contaminated food, and hazards associated with various EOCs in the soil-plant system are discussed. Various mitigation measures including removal technologies of EOCs in the soil are discussed. Finally, future research directions are presented.

Enhanced washing of polycyclic aromatic hydrocarbons from contaminated soils by the empowered surfactant properties of de novo O-alkylated humic matter

Aqueous solutions of humic acid (HA) derivatized by a catalyzed O-alkylation reaction with methyl, pentyl, and benzyl groups at 40, 60, and 80% of total HA acidity were used to wash off polycyclic aromatic hydrocarbons (PAHs) from two contaminated soils. The enhanced surfactant properties enabled the alkylated HA to remove phenanthrene, anthracene, fluoranthene, and pyrene from both soils more extensively than the original unmodified HA, the 60% benzylation generally showing the greatest soil washing efficiency. For both soils, all alkylated HA revealed greater PAH removals than Triton X-100 nonionic surfactant, while the benzylated and methylated HA nearly and fully matched pollutants release by the anionic SDS in the coarse- and fine-textured soils, respectively. A consecutive second washing with 60% benzylated HA removed additional PAHs, in respect to the first washing, from the coarser-textured soil, except for fluoranthene, while removal from the finer-textured soil incremented even more for all PAHs. These findings indicate that the enhanced hydrophobicity obtained by a simple and unexpensive chemical derivatization of a natural humic surfactant can be usefully exploited in the washing of polluted soils, without being toxic to the soil biota and by potentially promoting the subsequent bio-attenuation of organic pollutants.

Evaluation of factors causing lateral migration of light non-aqueous phase liquids (LNAPLs) in onshore oil spill accidents

Contamination of groundwater by harmful substances poses significant risks to both drinking water sources and aquatic ecosystems, making it a critical environmental concern. Most on-land spill events release organic molecules known as light non-aqueous phase liquids (LNAPLs), which then seep into the ground. Due to their low density and organic composition, they tend to float as they reach the water table. LNAPLs encompass a wide range of non-aqueous phase liquids, including various petroleum products, and can, over time, develop carcinogenic chemicals in water. However, due to frequent changes in hydraulic head, the confinement may fail to contain them, causing them to extend outward. When it contaminates water wells, people cannot reliably consume the water. The removal of dangerous contaminants from groundwater aquifers is made more challenging by LNAPLs. It is imperative to analyze the mechanisms governing LNAPL migration. As a response to this need and the associated dispersion of contaminants into adjacent aquifers, we have conducted a comprehensive qualitative literature review encompassing the years 2000-2022. Groundwater variability, soil structure, and precipitation have been identified as the three primary influential factors, ranked in the following order of significance. The rate of migration is shown to rise dramatically in response to changes in groundwater levels. Different saturation zones and confinement have a major effect on the lateral migration velocity. When the various saturation zones reach a balance, LNAPLs will stop moving. Although higher confinement slows the rate of lateral migration, it speeds up vertical migration. Beyond this, the lateral or vertical movement is also influenced by differences in the permeability of soil strata. Reduced mobility and tighter containment are the outcomes of migrating through fine-grained, low-porosity sand. The gaseous and liquid phases of LNAPLs move more quickly through coarse-grained soils. Due to the complexities and uncertainties associated with LNAPL behavior, accurately foreseeing the future spread of LNAPLs can be challenging. Although studies have utilized modeling techniques to simulate and predict LNAPL migration, the inherent complexities and uncertainties in the subsurface environment make it difficult to precisely predict the extent of LNAPL spread in the future. The granular soil structure considerably affects the porosity and pore pressure.

Remediation of heavily PAHs-contaminated soil with high mineral content from a coking plant using surfactant-enhanced soil washing

This study investigated the effectiveness of various surfactants at different concentrations in removing high concentrations of polycyclic aromatic hydrocarbons (PAHs) from soil with high mineral content, focusing on the impact of surfactant treatment on the mobility of the residual PAHs in soil. The results revealed that the cationic surfactant (CTMAB) inhibited removal of PAHs in the whole tested concentration range of 0.1-8 g/L. In contrast, the non-ionic and anionic surfactants (Triton X-100 and SDBS) significantly enhanced removal of PAHs as their amendment concentrations reached 2 g/L and above. Triton X-100 exhibited steadily increased efficacy with increasing amendment concentrations and maintained favorable solubilization capability when continuously amended, making it the preferable choice for remediating PAHs-contaminated soil. Surfactant and water washing processes altered soil physicochemical properties by removing some clay minerals (e.g., faujasite) and organic matter that can bind or sequester PAHs, potentially increasing their extractability and bioavailability in the washed soil, thereby posing higher ecological risks compared to the original one. Although soil washing decreased retention of the remaining PAHs in soil, it did not significantly impact PAHs release from soil by flowing water. These findings provide insights into the long-term effectiveness and ecological impacts of surfactant-enhanced washing as a potential remediation technique for PAHs-contaminated soil.

Research progress on remediation of organochlorine pesticide contamination in soil

Deteriorated soil pollution has grown into a worldwide environmental concern over the years. Organochlorine pesticide (OCP) residues, featured with ubiquity, persistence and refractoriness, are one of the main pollution sources, causing soil degradation, fertility decline and nutritional imbalance, and severely impacting soil ecology. Furthermore, residual OCPs in soil may enter the human body along with food chain accumulation and pose a serious health threat. To date, many remediation technologies including physicochemical and biological ways for organochlorine pollution have been developed at home and abroad, but none of them is a panacea suitable for all occasions. Rational selection and scientific decision-making are grounded in in-depth knowledge of various restoration techniques. However, soil pollution treatment often encounters the interference of multiple factors (climate, soil properties, cost, restoration efficiency, etc.) in complex environments, and there is still a lack of systematic summary and comparative analysis of different soil OCP removal methods. Thus, to better guide the remediation of contaminated soil, this review summarized the most commonly used strategies for OCP removal, evaluated their merits and limitations and discussed the application scenarios of different methods. It will facilitate the development of efficient, inexpensive and environmentally friendly soil remediation strategies for sustainable agricultural and ecological development.

Combination of separation and degradation methods after PFAS soil washing

The current study evaluated a three-stage treatment to remediate PFAS-contaminated soil. The treatment consisted of soil washing, foam fractionation (FF), and electrochemical oxidation (EO). The possibility of replacing the third stage, i.e., EO, with an adsorption process was also assessed. The contamination in the studied soils was dominated by perfluorooctane sulfonate (PFOS), with a concentration of 760 and 19 μg kg-1 in soil I and in soil II, accounting for 97 % and 70 % of all detected per-and polyfluoroalkyl substances (PFAS). Before applying a pilot treatment of soil, soil washing was performed on a laboratory scale, to evaluate the effect of soil particle size, initial pH and a liquid-to-soil ratio (L/S) on the leachability of PFAS. A pilot washing system generated soil leachate that was subsequently treated using FF and EO (or adsorption) and then reused for soil washing. The results indicated that the leaching of PFAS occurred easier in 0.063-1 mm particles than in the soil particles having a size below 0.063 mm. Both alkaline conditions and a continual replacement of the leaching solution increased the leachability of PFAS. The analysis using one-way ANOVA showed no statistical difference in means of PFOS washed out in laboratory and pilot scales. This allowed estimating twenty washing cycles using 120 L water to reach 95 % PFOS removal in 60 kg soil. The aeration process removed 95-99 % PFOS in every washing cycle. The EO and adsorption processes achieved similar results removing up to 97 % PFOS in concentrated soil leachate. The current study demonstrated a multi-stage treatment as an effective and cost-efficient method to permanently clean up PFAS-contaminated soil.

Current technologies for heavy metal removal from food and environmental resources

Exposure to heavy metals in water and food poses a significant threat to human well-being, necessitating the efficient removal of these contaminants. The process of urban development exacerbates heavy metal pollution, thereby increasing risks to both human health and ecosystems. Heavy metals have the capacity to enter the food chain, undergo bioaccumulation and magnify, ultimately resulting in adverse effects on human health. Therefore, implementing effective pollution control measures and adopting sustainable practices are crucial for mitigating exposure and associated health risks. Various innovative approaches, including adsorption, ion exchange, and electrochemical technology, are currently being actively investigated to cope with the issue of heavy metal contamination. These innovative methods offer benefits such as efficient recycling, cost-effectiveness and environmental friendliness. In this review, we summarize recent advances for removing heavy metals from water, soil and food, providing valuable guidance for environmental engineers and researchers seeking to address contamination challenges.

Biogenic polymer nanoparticles to remove hydrophobic organic contaminants from water

Soil and water pollution is of significant concern worldwide because of the consequences of environmental degradation and harmful effects on human health. Water bodies are very much polluted by various organic and inorganic pollutants by different human activities, including industrial wastes. Environmental pollution remains high because of urbanization-induced industrial developments and human lifestyle. It accumulates pollutants in the environment including plants and living organisms. Even mothers' milk is poisoned because of the uncontrolled, widespread increase in pollution. The discharge levels of organic hydrophobic contaminants in the water and soil are increasing rapidly. This severe pollution must be remediated to upgrade the environment and ensure the safety of human beings. It is vital to eradicate soil and water pollution to guarantee sufficient food and water. Different techniques available to remove the pollutants vary according to the type of pollutants. Hydrophobic contaminants are more dangerous than heavy metals and other pollutants; they cannot be easily removed, requiring special care. Hydrophobic organoxenobiotics released in the environment pose severe contamination in soil and water. Therefore, developing efficient and cost-effective processes is necessary to remove hydrophobic contaminants from soil and water. With nanoparticle-mediated remediation techniques, the green-synthesized nanoparticles exhibit improved performance. This review consolidates reports on the remediation techniques of hydrophobic contaminants, focusing on green-synthesized remediation agents. The very limited works on green synthesis of polymeric nanoparticles, particularly polyurethane-based materials for organic contaminants removal demand more attention in this area. PRACTITIONER POINTS: Consolidated the effects of hydrophobic organic and plastic contaminants on environment degradation. Summarized the advantages of green synthesized polymer nanoparticles for efficient removal of hydrophobic contaminants. Discussed the different sources of pollution and remediation techniques referring 112 research works.

Phenanthrene removal from a spent sediment washing solution in a continuous-flow stirred-tank reactor

The issue of polycyclic aromatic hydrocarbons (PAHs) is widespread in marine sediments involving ecological systems and human health. Sediment washing (SW) has proven to be the most effective remediation approach for sediments polluted by PAHs, such as phenanthrene (PHE). However, SW still raises waste handling concerns due to a considerable amount of effluents generated downstream. In this context, the biological treatment of a PHE- and ethanol-containing spent SW solution can represent a highly efficient and environmentally-friendly strategy, but its knowledge is still scarce in scientific literature and no studies have so far been conducted in continuous mode. Therefore, a synthetic PHE-polluted SW solution was biologically treated in a 1 L aerated continuous-flow stirred-tank reactor for 129 days by evaluating the effect of different pH values, aeration flowrates and hydraulic retention times as operating parameters over five successive phases. A PHE removal efficiency of up to 75-94% was achieved by an acclimated PHE-degrading consortium mainly composed of Proteobacteria, Bacteroidota and Firmicutes phyla through biodegradation following the adsorption mechanism. PHE biodegradation, mainly occurring via the benzoate route due to the presence of PAH-related-degrading functional genes and a phthalate accumulation up to 46 mg/L, was also accompanied by a reduction of dissolved organic carbon and ammonia nitrogen above 99% in the treated SW solution.

Efficient removal of polybrominated diphenyl ethers from soil washing effluent by dummy molecular imprinted adsorbents: Selectivity and mechanisms

Surfactant enhanced elution is an effective method for removing hydrophobic organic pollutants from soils. The key to the development of leaching technology is selective removal of targeted pollutants in soil washing effluent and recycling of surfactant solutions. In this study, a molecular imprinting technique was applied to selectively sorb polybrominated diphenyl ethers (PBDEs) in soil washing effluent. The novel molecular imprinted polymers (MIPs) using different template molecules were synthesized by precipitation polymerization. Adsorption behaviors and mechanisms of MIPs were studied through experiments and theoretical calculations. The results show that 4-bromo-4'-hydroxybiphenyl and toluene can be effective imprinting molecule for MIPs synthesis. The maximal adsorption capacity of selected dummy molecular imprinted polymer (D₁-MIP) was 1032.36 µmol/g, and that of part molecular imprinted polymer (P-MIP) was 981.13 µmol/g. Their imprinting factors in 5 PBDEs adsorption ranged from 2.13 to 5.88, the recovery percentage of Triton X-100 can reach 99.09%, confirming the feasibility of reusing surfactant. Various PBDEs could be removed by MIPs, and Quantitative Structure Property Relationship analysis revealed that PBDEs' molecular volume, planarity, polarity, and hydrophobicity have major influences on their adsorption performance. DFT calculation revealed that Van der Waals force and hydrogen bonding played important roles during selective adsorption. These results can provide effective theoretical guidance for surfactant enhanced soil elution in practical engineering applications.

Green dispersants for oil spill response: A comprehensive review of recent advances

Green dispersants are so-called "green" because they are renewable (from bio-based sources), non-volatile (from ionic liquids), or are from naturally available solvents (vegetable oils). In this review, the effectiveness of different types of green dispersants, namely, protein isolates and hydrolysates from fish and marine wastes, biosurfactants from bacterial and fungal strains, vegetable-based oils such as soybean lecithin and castor oils, as well as green solvents like ionic liquids are reviewed. The challenges and opportunities offered by these green dispersants are also elucidated. The effectiveness of these dispersants varies widely and depends on oil type, dispersant hydrophilicity/hydrophobicity, and seawater conditions. However, their advantages lie in their relatively low toxicity and desirable physico-chemical properties, which make them potentially ecofriendly and effective dispersants for future oil spill response.

Bioaccumulation and Bioremediation of Heavy Metals in Fishes-A Review

Heavy metals, the most potent contaminants of the environment, are discharged into the aquatic ecosystems through the effluents of several industries, resulting in serious aquatic pollution. This type of severe heavy metal contamination in aquaculture systems has attracted great attention throughout the world. These toxic heavy metals are transmitted into the food chain through their bioaccumulation in different tissues of aquatic species and have aroused serious public health concerns. Heavy metal toxicity negatively affects the growth, reproduction, and physiology of fish, which is threatening the sustainable development of the aquaculture sector. Recently, several techniques, such as adsorption, physio-biochemical, molecular, and phytoremediation mechanisms have been successfully applied to reduce the toxicants in the environment. Microorganisms, especially several bacterial species, play a key role in this bioremediation process. In this context, the present review summarizes the bioaccumulation of different heavy metals into fishes, their toxic effects, and possible bioremediation techniques to protect the fishes from heavy metal contamination. Additionally, this paper discusses existing strategies to bioremediate heavy metals from aquatic ecosystems and the scope of genetic and molecular approaches for the effective bioremediation of heavy metals.

Differentiating the reaction mechanism of three-dimensionally electrocatalytic system packed with different particle electrodes: Electro-oxidation versus electro-fenton

Recently, there are still some controversial mechanisms of the 3D electrocatalytic oxidation system, which would probably confound its industrial application. From the conventional viewpoint, the Ti₄O₇ material may be the desired particle electrodes in the 3D system since its high oxygen evolution potential favors the production of ^•OH via H₂O splitting reaction at the anode side of Ti₄O₇ particle electrodes. In fact, the incorporation of Ti₄O₇ particles showed phenol degradation of 88% and COD removal of 51% within 120 min, under the optimum conditions at energy consumption of 0.668 kWh g^-1 COD, the performance of which was much lower than those in many previous literatures. In contrast, the prepared carbon black-polytetrafluoroethylene composite (CB-PTFE) particles with abundant oxygen-containing functional groups could yield considerable amounts of H₂O₂ (200 mg L^-1) in the 3D reactor and achieved a complete degradation of phenol and COD removal of 80% in the presence of Fe²⁺, accompanying a low energy consumption of only 0.080 kWh g^-1 COD. It was estimated that only 20% of Ti₄O₇ particles near the anode attained the potential over 2.73 V/SCE at 30 mA cm^-2 based on the potential test and simulation, responsible for the low yield of ^•OH via the H₂O splitting on Ti₄O₇ (1.74 × 10^-14 M), and the main role of Ti₄O₇ particle electrodes in phenol degradation was through direct oxidation. For the CB-PTFE-based 3D system, current density of 10 mA cm^-2 was sufficient for all the CB-PTFE particles to attain cathodic potential of -0.67 V/SCE, conducive to the high yield of H₂O₂ and ^•OH (9.11 × 10^-14 M) in the presence of Fe²⁺, and the ^•OH-mediated indirect oxidation was mainly responsible for the phenol degradation. Generally, this study can provide a deep insight into the 3D electrocatalytic oxidation technology and help to develop the high-efficiency and cost-efficient 3D technologies for industrial application.

Remediation of Cu, Cr(VI) and Pb polluted soil with industrial/agricultural by-products in seasonally frozen areas

Soils contaminated with potentially toxic elements (PTEs) may face serious environmental problems and pose health risks. In this study, the potential feasibility of industrial and agricultural by-products as low-cost green stabilization materials for copper (Cu), chromium (Cr(VI)) and lead (Pb) polluted soil was investigated. The new green compound material SS ∼ BM ∼ PRP was prepared by ball milling with steel slag (SS), bone meal (BM), and phosphate rock powder (PRP) which had an excellent stabilization effect on contaminated soil. Under 20% SS ∼ BM ∼ PRP addition into the soil, the toxicity characteristic leaching concentrations of Cu, Cr(VI) and Pb were reduced by 87.5%, 80.9% and 99.8%, respectively, and the phytoavailability and bioaccessibility of PTEs were reduced by more than 55% and 23%. The freezing-thawing cycle significantly increased the activity of heavy metals, and the particle size became smaller due to the fragmentation of the soil aggregates while SS ∼ BM ∼ PRP could form calcium silicate hydrate by hydrolysis to cement the soil particles, which inhibited the release of PTEs. Different characterizations indicated that the stabilization mechanisms mainly involved ion exchange, precipitation, adsorption and redox reaction. Overall, the results obtained suggest that the SS ∼ BM ∼ PRP is a green, efficient and durable material for remediation of various heavy metal polluted soils in cold regions and a potential method for co-processing and reusing industrial and agricultural wastes.

Fast degradation of macro alkanes through activating indigenous bacteria using biosurfactants produced by Burkholderia sp

Soil bacteria that produce biosurfactants can use total petroleum hydrocarbons (TPHs) as a carbon source. This study demonstrated that biosurfactants produced by Burkholderia sp. enhanced the recovery and synergism of soil microbial community, resulting in fast degradation of macro alkanes. Experiments were carried out by applying bio-stimulation after pre-oxidation to investigate the effects of nutrient addition on biosurfactant production, TPH degradation, and microbial community succession in the soil. The results presented that bio-stimulation could produce biosurfactants in high C/N (32.6) and C/H (13.3) conversion after pre-oxidation and increased the total removal rate of TPH (10.59-46.71%). The number of total bacteria had a rapid increase trend (2.94-8.50 Log CFU/g soil). The degradation rates of macro alkanes showed a 4.0-fold (48.07 mg/kg·d^-1 versus 186.48 mg/kg·d^-1) increase, and the bioremediation time of degrading macro alkanes saved 166 days. Further characterization revealed that the biosurfactants produced by Burkholderia sp. could activate indigenous bacteria to degrade macro alkanes rapidly. A shift in phylum from Actinomycetes to Proteobacteria was observed during bioremediation. The average relative abundance of the microbial community increased from 36.24 to 64.96%, and the predominant genus tended to convert from Allorhizobium (8.57%) to Burkholderia (15.95%) and Bacillus (15.70%). The co-occurrence network and Pearson correlation analysis suggested that the synergism of microbial community was the main reason for the fast degradation of macro alkanes in petroleum-contaminated soils. Overall, this study indicated the potential of the biosurfactants to activate and enhance the recovery of indigenous bacteria after pre-oxidation, which was an effective method to remediate petroleum-contaminated soils.

The efficacy of soil washing for the remediation of per- and poly-fluoroalkyl substances (PFASs) in the field

This paper aims to describe the performance of a soil washing plant (SWP) for remediating a per- and poly-fluoroalkyl substances (PFASs)-contaminated soil with a high clay content (61%). The SWP used both physical and chemical processes; fractionation of the soil particles by size and partitioning of PFASs into the aqueous phase to remove PFASs from the soil. Contaminated water was treated in series with granulated activated carbon (GAC) and ion-exchange resin and reused within the SWP. Approximately 2200 t (dry weight) of PFAS-contaminated soil was treated in 25 batches of 90 t each, with a throughput of approximately 11 t soil/hr. Efficiency of the SWP was measured by observed decreases in total and leachable concentrations of PFASs in the soil. Average removal efficiencies (RE) were up to 97.1% for perfluorocarboxylic acids and 94.9% for perfluorosulfonic acids. REs varied among different PFASs depending on their chemistry (functional head group, carbon chain length) and were independent of the total PFAS concentrations in each soil batch. Mass balance analysis found approximately 90% of the PFAS mass in the soil was transferred to the wash solution and > 99.9% of the PFAS mass in the wash solution was transferred onto the GAC without any breakthrough.

Review of the application of surfactants in microemulsion systems for remediation of petroleum contaminated soil and sediments

Microemulsions are important for soil and sediment remediation technology. The characteristics of the surfactants that make up these microemulsions include low sorption into soil or sediments, low surface and interfacial tension, the ability to penetrate tiny pores, and good solubilization of contaminants. This review revealed that microemulsions formulated with nonionic and anionic surfactants have higher recovery efficiencies for hydrophobic contaminants than cationic ones, as evidenced by the surveyed studies reporting effective remediation of soils and sediments using on microemulsions. These microemulsified systems have been found to remove petroleum and its derivatives from soil or sediments at percentages ranging from 40 to 100%. As such, this review can aid with the choice of surfactants used in microemulsions for remediation, such as those with plant-based components, which are promising solutions for the remediation of contaminated soils due to their contaminant extraction efficiency and biodegradability.

Potential for selective oxidation of aniline in soil washing effluent by active chlorine and testing its practicality

Recovery of surfactants in the soil washing effluent (SWE) can significantly reduce the cost of the soil washing (SW) technology. This paper consists of two parts experiments. The first part constructed a selective oxidation system of active chlorine by electrochemical technology to treat SWE. Three factors, current density, NaCl concentration and TW 80 to aniline concentration ratio (T/A), were set up for a total of nine sets of experiments after orthogonal design. The results of ANOVA analysis and visual analysis showed that the NaCl concentration greatly affected the aniline removal efficiency (ARE) and the TW 80 retention efficiency (TW 80 RE), and the effects were in opposite directions. The biotoxicity of the SWE decreased as the experiment progressed, and at the end of the experiment, 30%-45% of TW 80 was still present in each set. And the oxidation group quenching experiments determined that the degradation of aniline was mainly contributed by active chlorine. Because active chlorine slowed the loss rate of TW 80, the electrochemical treatment of SWE + soil in-situ sequential batch recirculation washing method was designed, and 50% of aniline in the soil was washed out after 125h. At the end of the experiment, the less biotoxic SWE was collected where no aniline and TW 80 were present, and only small organic acids were present after the GC-MS test. The method has a great potential to be applied as it shows good results in the treatment of soil pollution incidents.

Use of surfactants in biodegradation of hydrophobic compounds: A review

Industrial development has led to immense emission and accumulation of hydrophobic organic compounds (HOC) in the environment. Primarily, they include petroleum hydrocarbons, polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs). The extensive use of hydrophobic pesticides in agriculture led to the contamination of soil, air and water. Many of the hydrophobic substances are dangerous for the biota due to their high toxicity and carcinogenic and mutagenic activity. In addition to their widespread use, the possible adverse effects are also determined by their resistance to decomposition, including the biological one, which defines their long-term persistence in soil, water and other media. The impact of HOC on ecosystems poses a potential threat not only to the environment but also to human health. Numerous studies were devoted to the remediation of soils polluted with HOC. The approaches to remediation can be conditionally divided into mechanical, chemical and bio-methods, with the former two being widely used in the past. Bioremediation methods proved more efficient and, as a rule, more cost-effective and environmentally friendly. In recent years, the good efficiency of solubilizing agents in bioremediation processes has been demonstrated. Various surfactants have become widely popular due to their ability to increase desorption, water solubility and microbial bioavailability of HOC. In this brief review, state-of-the-art literature data on the biodegradation of hydrophobic organic compounds using surfactants were considered.

Patent mining on soil pollution remediation technology from the perspective of technological trajectory

Recent years have seen a marked growth in soil environmental problems, however, the research & development (R&D) direction of soil pollution remediation technology (SPRT) for addressing related challenges to the global ecosystem is still unclear. Patent is the most effective carrier of technological information. Therefore, this study investigates the status and future direction of SPRT through the analysis and mining of 14,475 patents from 1971 to 2020. In 2006-2020, 14,435 SPRT patents (79% of the total) were published, which is in the development stage. By measuring the proportion of high-value patents, determined by the ratio of the number of patent families containing two or more patents (PF2) to that containing at least one patent (PF1), we found that United States (PF2/PF1 = 0.711), Japan (PF2/PF1 = 0.500), and South Korea (PF2/PF1 = 0.431) hold a monopoly. International patent organizations serve as a bridge for technology transfer. Patent CN101947539-A measured by structural hole index (Effective size = 98.194, Efficiency = 0.926) has the most significant technological influence. Therefore, in order to accomplish the technological transition and improve the soil remediation capacity, more attention should be paid to the microbial-assisted phytoremediation technology related to inorganic pollutants, hyperaccumulators and stabilizers. Additionally, patents CN102834190-A (Effective size = 23.930, Efficiency = 0.855, Constraint = 0.141, Hierarchy = 0.089) and CN105855289 (Effective size = 21.453, Efficiency = 0.795 Constraint = 0.149, Hierarchy = 0.086) are both at the location of structural holes. So, more research should be carried out on green and cost-effective solutions for reducing organic pollutants in soil remediation. The current study identifies opportunities for innovations and breakthroughs in SPRT and offers relevant information on technological development prospects.

Acute Toxicity Evaluation of Lindane-Waste Contaminated Soils Treated by Surfactant-Enhanced ISCO

The discharge of lindane wastes in unlined landfills causes groundwater and soil pollution worldwide. The liquid waste generated (a mixture of 28 chlorinated organic compounds, COCs) constitutes a dense non-aqueous phase liquid (DNAPL) that is highly persistent. Although in situ chemical oxidation (ISCO) is effective for degrading organic pollutants, the low COCs solubility requires high reaction times. Simultaneous injection of surfactants and oxidants (S-ISCO) is a promising technology to solve the limitation of ISCO treatment. The current work studies the remediation of highly polluted soil (COCs = 3682 mg/kg) obtained at the Sardas landfill (Sabiñáñigo, Spain) by ISCO and S-ISCO treatments. Special attention is paid to acute soil toxicity before and after the soil treatment. Microtox®, modified Basic Solid-Phase Test (mBSPT) and adapted Organic Solvent Sample Solubilization Test (aOSSST) were used for this scope. Persulfate (PS, 210 mM) activated by alkali (NaOH, 210 mM) was used in both ISCO and S-ISCO runs. A non-ionic and biodegradable surfactant selected in previous work, Emulse®3 (E3, 5, and 10 g/L), was applied in S-ISCO experiments. Runs were performed in soil columns filled with 50 g of polluted soil, with eight pore volumes (Pvs) of the reagents injected and 96 h between successive Pv injections. The total treatment time was 32 days. The results were compared with those corresponding without surfactant (ISCO). After remediation treatments, soils were water-washed, simulating the conditions of groundwater flux in the subsoil. The treatments applied highly reduced soil toxicity (final soil toxicity equivalent to that obtained for non-contaminated soil, mBSPT) and organic extract toxicity (reduction > 95%, aOSSST). Surfactant application did not cause an increase in the toxicity of the treated soil, highlighting its suitability for full-scale applications.

Polycyclic aromatic hydrocarbons remobilization from contaminated porous media by (bio)surfactants washing

Biosurfactants, surface-active agents produced by microorganisms, are increasingly studied for their potential use in soil remediation processes because they are more environmentally friendly than their chemically produced homologues. In this work, we report on the use of a crude biosurfactant produced by a bacterial consortium isolated from a PAHs-contaminated soil, compared with other (bio)surfactants (Tween80, Sodium dodecyl sulfate - SDS, rhamnolipids mix), to wash PAHs from a contaminated porous media. Assays were done using columns filled with sand or sand-clay mixtures (95:5) spiked with four model PAHs. The crude biosurfactant showed less adsorption to the [sand] and the [sand + clay] columns compared to Tween 80, SDS and the rhamnolipid mix. The biosurfactant showed the second best capacity to remove PAHs from the columns (as dissolved and particulate phases), both from [sand] and [sand + clay], after SDS when applied at lower concentrations than the other sufactants. The effluent concentrations of phenanthrene (PHE), pyrene (PYR) and benzo[a]pyrene (BAP) increased in the presence of the crude biosurfactant. Compared to the control experiment using only water, the global PAHs washed mass (amount of PAHs removed from the columns) increased between 9 and 1000 times for PHE and BAP in the [sand] column, and between 55 and 6000 times respectively for PHE and BAP in the [sand + clay] columns. Moreover, in the [sand + clay] columns, leaching of a part of the clays was observed in the SDS and the biosurfactant injections assays. This clay leaching resulted in higher PAHs removal, due not to desorption but rather to particulate transport. In the context of washing PAH-contaminated soils in biopiles or subsurface remediation, our results could help in sizing the remediation approach using an environmental friendly biosurfactant, before a pump-and-treat process.

Supramolecular bioamphiphile facilitated bioemulsification and concomitant treatment of recalcitrant hydrocarbons in petroleum refining industry oily waste

Bioremediation of real-time petroleum refining industry oily waste (PRIOW) is a major challenge due to the poor emulsification potential and oil sludge disintegration efficiency of conventional bioamphiphile molecules. The present study was focused on the design of a covalently engineered supramolecular bioamphiphile complex (SUBC) rich in hydrophobic amino acids for proficient emulsification of hydrocarbons followed by the concomitant degradation of total petroleum hydrocarbons (TPH) in PRIOW using the hydrocarbonoclastic microbial bio-formulation system. The synthesis of SUBC was carried out by pH regulated microbial biosynthesis process and the yield was obtained to be 450.8 mg/g of petroleum oil sludge. The FT-IR and XPS analyses of SUBC revealed the anchoring of hydrophilic moieties of monomeric bioamphiphilic molecules, resulting in the formation of SUBC via covalent interaction. The SUBC was found to be lipoprotein in nature. The maximum loading capacity of SUBC onto surface modified rice hull (SMRH) was achieved to be 45.25 mg/g SMRH at the optimized conditions using RSM-CCD design. The SUBC anchored SMRH was confirmed using SEM, FT-IR, XRD and TGA analyses. The adsorption isotherm models of SUBC onto SMRH were performed. The integrated approach of SUBC-SMRH and hydrocarbonoclastic microbial bio-formulation system, emulsified oil from PRIOW by 92.86 ± 2.26% within 24 h and degraded TPH by 89.25 ± 1.75% within 4 days at the optimum dosage ratio of SUBC-SMRH (0.25 g): PRIOW (1 g): mass of microbial-assisted biocarrier material (0.05 g). The TPH degradation was confirmed by SARA fractional analysis, FT-IR, ¹H NMR and GC-MS analyses. The study suggested that the application of covalently engineered SUBC has resulted in the accelerated degradation of real-time PRIOW in a very short duration without any secondary sludge generation. Thus, the SUBC integrated approach can be considered to effectively manage the hydrocarbon contaminants from petroleum refining industries under optimal conditions.

Stress response characteristics of indigenous microorganisms in aromatic-hydrocarbons-contaminated groundwater in the cold regions of Northeast China

The resistance mechanism of microbial communities in contaminated groundwater under combined stresses of aromatic hydrocarbons (AHs), NH₄⁺, and Fe-Mn exceeding standard levels was studied in an abandoned oil depot in Northeast China. The response of environmental parameters and microbial communities under different pollution levels in the study area was discussed, and microscopic experiments were conducted using background groundwater with different AHs concentrations. The results showed that indigenous microbial community were significantly affected by environmental factors, including pH, TH, COD_Mn, TFe, Cr (VI), NH₄⁺, NO₃^-, and SO₄^2-. AHs likely had a limited influence on microbial communities, mainly causing indirect changes in the microbial community structure by altering the electron donor/acceptor (mainly Fe, Mn, NO₃^-, NO₂^-, NH₄⁺, and SO₄^2-) content in groundwater, and there was no linear effect of AHs content on the microbial community. In low- and medium-AHs-contaminated groundwater, the microbial diversity increased, whereas high AHs contents decreased the diversity of the microbial community. The microbial community had the strongest ability to metabolize AHs in the medium-AHs-contaminated groundwater. In the high-AHs-contaminated groundwater, microbial communities mainly degraded AHs through a complex co-metabolic mechanism due to the inhibitory effect caused by the high concentration of AHs, whereas in low-AHs-contaminated groundwater, microbial communities mainly caused a mutual transformation of inorganic electron donors/acceptors (mainly including N, S), and the microbial community's ability to metabolize AHs was weak. In the high-AHs-contaminated groundwater, the microbial community resisted the inhibitory effect of AHs mainly via a series of resistance mechanisms, such as regulating their life processes, avoiding unfavorable environments, and enhancing their feedback to the external environment under high-AHs-contaminated conditions.

Effects of mineral species and petroleum components on thermal desorption behavior of petroleum-contaminated soil

Thermal desorption (TD) behavior of high-concentration petroleum-contaminated soil (PCS) is affected by soil composition, especially inorganic minerals. In this study, the TD behavior of petroleum-contaminated quartz (original mineral) and kaoline (clay mineral) were compared with those of pure petroleum (Petro-free); their "saturate, aromatic, resin, and asphaltenes" (SARA) fractions were investigated using thermogravimetry and differential thermogravimetry (TG-DTG). The modelling of the petroleum removal kinetics was also analyzed to provide insights into the mechanism. The results revealed that the limiting factor controlling the desorption of petroleum from quartz (Petro-Qtz) and kaoline (Petro-Kln) is the minerals, which increased the effective TD temperature by 200 °C and decreased TD efficiency by 2%. Compared to Petro-Qtz, Petro-Kln showed a lower desorption efficiency of 5% and the process was accomplished at a higher temperature of 100 °C. The investigation on SARA fractions indicated that polar fractions (i.e., aromatics, resins, and asphaltenes) were strongly captured by the minerals. The increment of the TD temperature of petroleum (resins-160 °C > aromatics-20 °C > saturates-5 °C) increased with the polarity of petroleum components. These results could be validated by thermogravimetry-gas chromatography/mass spectroscopy (TG-GC/MS) through the delayed desorption of naphthalene and acenaphthene. Furthermore, the increment of the TD temperature of SARA fractions on kaoline was higher than those on quartz. This makes sense because the kaoline decreased the diffusion of hydrocarbons due to its porosity features and higher specific surface area (kaoline 5.3300 m² g^-1, quartz 0.1153 m² g^-1). In addition, the analysis of the desorption kinetic models showed that the observed hysteresis was related to the diffusion barrier caused by chemisorption (n＜1). In consequence, the Petro-Kln showed a lower desorption efficiency, a slower desorption, and as a result, a higher energy consumption (0.476 kW h) for thermal remediation than Petro-Qtz (0.238 kW h).

Efficiency of diesel-contaminated soil washing with different tween 80 surfactant concentrations, pH, and bentonite ratios

Soil contaminated with diesel fuel is a hazard to the environment and people; therefore, it needs to be remediated. Soil washing enhanced with Tween 80 (TW80), non-toxic and non-ionic surfactant, can effectively remove diesel from contaminated soils. In this study, the effects of 0.01%, 0.1%, 0.5%, 1%, and 1.5% (v/v) [TW80] concentrations; 0%, 5%, and 15% (w/w) bentonite; and variation in pH on washing efficiency were examined in a batch test. The prepared samples were physiochemically characterized on the basis of particle size, zeta potential, cation exchange capacity (CEC), scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS) analysis. When the bentonite content in soil was 5% or 15%, 1.5% [TW80] solution exhibited the highest washing efficiency. The diesel removal efficiencies in soil with 0% bentonite were slightly higher than those in soils with 5% and 15% bentonite because of the increase in adsorption sites by bentonite; consequently, diesel could not be easily washed out. The extracted n-alkanes showed that the percentage of carbon number 20 was higher than that of the other even-numbered carbons in the retained washed samples analyzed by gas chromatography-mass spectrometry (GC-MS). In all the washing tests, the diesel removal efficiencies in soil with 15% bentonite and 0.1% [TW80] were lower than those in soil with 15% bentonite and water because of adsorption. The bentonite samples washed with TW80 have different morphologies, with a voluminous structure composed of the fusion of all layered structures, as supported by SEM results. Changes in the diesel content and residual TW80 content in the soil before and after washing were shown by the carbon content in the EDS results. The mechanism of the washing effect was investigated by CEC and zeta potential measurements. This study may aid in selecting appropriate conditions for improving washing efficiencies in future field applications.

Current and emerging trends in bioaugmentation of organic contaminated soils: A review

Organic contaminated soils constitute an important environmental problem, whereas field applicability of existing physical-chemical methods has encountered numerous obstacles, such as high chemical cost, large energy consumption, secondary pollution, and soil degradation. Bioaugmentation is an environmentally friendly and potentially economic technology that efficiently removes toxic pollutants from organic contaminated soils by microorganisms or their enzymes and bioremediation additives. This review attempted to explore the recent advances in bioaugmentation of organic contaminated soils and provided a comprehensive summary of various bioaugmentation methods, including bacterial, fungus, enzymes and bioremediation additives. The practical application of bioaugmentation is frequently limited by soil environmental conditions, microbial relationships, enzyme durability and remediation cycles. To tackle these problems, the future of bioaugmentation can be processed from sustainability of broad-spectrum bioremediation carriers, microbial/enzyme agents targeting combined contaminants, desorption of environmentally friendly additives and small molecular biological stimulants. Findings of this research are expected to provide new references for bioaugmentation methods that are practically feasible and economically potential.

Enhancing low-temperature thermal remediation of petroleum sludge by solvent deasphalting

Thermal treatment is a promising technique for treating petroleum sludge (PS). However, asphaltenes as a recalcitrant fraction of PS induce strong bounding between petroleum and minerals, and therefore lead to the need for high temperature and hence high energy consumption in thermal treatment of PS. In this study, a novel method combining a deasphalting pretreatment of PS with low-temperature thermal desorption (LTTD) was developed. The efficiency of deasphalting was found to be positively correlated to the ability of n-alkanes and asphaltene dispersants in dispersing asphaltenes. In treating six different kinds of PS, the residual oil contents were all below 2.5% after the deasphalting alone. Compared with direct thermal desorption at 600 °C for 1 h, dodecyl benzene sulfonic acid (DBSA)-assisted heptane deasphalting made thermal desorption at 350 °C for 1 h sufficient to treat these APS. The residual oil content of sludge after LTTD is lower than 0.45%. FT-IR, Raman spectra and XPS analysis confirmed that the carbon residue in APS after LTTD is primarily graphite state, which is extremely stable and does not migrate to the surrounding environment as compared with the crude oil in the APS. Hence, solvent deasphalting results in effective treatment of PS by LTTD, while the solvent can be recycled by distillation and crude oil recovered as value-added petroleum resource. The LTTD represents therefore a novel green strategy for treating PS and resource utilization.

Mobilization of contaminants: Potential for soil remediation and unintended consequences

Land treatment has become an essential waste management practice. Therefore, soil becomes a major source of contaminants including organic chemicals and potentially toxic elements (PTEs) which enter the food chain, primarily through leaching to potable water sources, plant uptake, and animal transfer. A range of soil amendments are used to manage the mobility of contaminants and subsequently their bioavailability. Various soil amendments, like desorbing agents, surfactants, and chelating agents, have been applied to increase contaminant mobility and bioavailability. These mobilizing agents are applied to increase the contaminant removal though phytoremediation, bioremediation, and soil washing. However, possible leaching of the mobilized pollutants during soil washing is a major limitation, particularly when there is no active plant uptake. This leads to groundwater contamination and toxicity to plants and soil biota. In this context, the present review provides an overview on various soil amendments used to enhance the bioavailability and mobility of organic and inorganic contaminants, thereby facilitating increased risk when soil is remediated in polluted areas. The unintended consequences of the mobilization methods, when used to remediate polluted sites, are discussed in relation to the leaching of mobilized contaminants when active plant growth is absent. The toxicity of targeted and non-targeted contaminants to microbial communities and higher plants is also discussed. Finally, this review work summarizes the existing research gaps in various contaminant mobilization approaches, and prospects for future research.

Surface-catalyzed electro-Fenton with flexible nanocatalyst for removal of plasticizers from secondary wastewater effluent

Activation of H₂O₂ with metal-free catalysts is an efficient and environmentally benign alternative to electron-Fenton (EF) for organics degradation. In the present study, flexible nanocatalysts were synthesized with self-regulated metal oxide nanoparticles (FeOx NPs) for efficient removal of plasticizers from secondary wastewater effluent (SWE). Compared with NGr/EF and FeOx@Gr/EF systems, FeOx@NGr/EF could enhance the decay kinetics of plasticizers by 3.9-4.4 times and reduce 48-59% of the disposal cost. Reactive oxygen species tests and trapping experiments proved that the surface-catalyzed EF effectively broadened the range of solution pH. Density functional theory calculations coupled with electrochemical measurements indicated that the electron transfer rates between Fe-O-C atoms were enhanced with N-doping due to strong interactions between N-Fe bond. The synergistic effects of FeOx and N could improve the oxygen reduction activity for H₂O₂ generation, and accelerate electron transfer between FeOx/NGr and H₂O₂ for ^•OH generation, offering an alternative for wastewater treatment.

Study on Gaseous Chlorobenzene Treatment by a Bio-Trickling Filter: Degradation Mechanism and Microbial Community

Large-flow waste gas generated from the pharmaceutical and chemical industry usually contains low concentrations of VOCs (volatile organic compounds), and it is also the key factor that presents challenges in terms of disposal. To date, due to the limitations of mass transfer rate and microbial degradation ability, the degradation performance of VOCs using the biological method has not been ideal. Therefore, in this study, the sludge from a chlorobenzene-containing wastewater treatment plant was inoculated into our experimental bio-trickling filter (BTF) to explore the feasibility of domestication and degradation of gaseous chlorobenzene by highly active microorganisms. The kinetics of its mass transfer reaction and microbial community dynamics were also discussed. Moreover, the main process parameters of BTF for chlorobenzene degradation were optimized. The results showed that the degradation effect of chlorobenzene reached more than 85% at an inlet concentration of chlorobenzene 700 mg·m−3, oxygen concentration of 10%, and an empty bed retention time (EBRT) of 80 s. The mass transfer kinetic analysis indicated that the process of chlorobenzene degradation in the BTF occurred between the zero-stage reaction and the first-stage reaction. This BTF contributed significantly to the biodegradability of chlorobenzene, overcoming the limitation of gas-to-liquid/solid mass transfer of chlorobenzene. The analysis of the species diversity showed that Thermomonas, Petrimona, Comana, and Ottowia were typical organic-matter-degrading bacteria that degraded chlorobenzene efficiently with xylene present.

Elucidating the effect of different desorbents on naphthalene desorption and degradation: Performance and kinetics investigation

In this work, the effect of different desorbents (low molecular weight organic acids (LMWOAs), surfactants, and inorganic salts) on naphthalene (NAP) desorption in soil was investigated, and the results showed that NAP desorption pattern fitted the pseudo-second-order kinetics. The addition of LMWOAs, especially citric acid (CA), could stimulate the reactive oxygen species (ROS) generation and NAP degradation in Fe(II) activated persulfate (PS) system, while the presence of surfactants and CaCl₂ could inhibit the NAP removal due to the competitive consumption of ROS. The maximum removal of NAP was 97.5% within 120 min at the PS/Fe(II)/CA/NAP molar ratio of 15/5/1/1, and the pseudo-first-order kinetic constant of NAP removal increased from 0.0110 min^-1 to 0.0783 min^-1 with the addition of CA. Compared with surfactants and inorganic salts, LMWOAs, especially CA, were more suitable as desorbent in soil washing coupled with in situ chemical oxidation technique. Moreover, 1.86 mg L^-1 desorbed amount and 36.1% removal of NAP from soil could be obtained with the presence of 1 mM CA. Finally, the significant removal of NAP and other contaminants (phenanthrene, fluoranthene, and benzene series) in actual groundwater could provide theoretical basis and technical support for the remediation of organic contaminated sites with desorbents.