Microplastics in the marine environment

Micro- and nano-plastics, intestinal inflammation, and inflammatory bowel disease: A review of the literature

Plastics, encompassing a wide range of polymeric materials, and their downstream products (micro- and nanoplastics, MNPs) are accumulating in the environment at an alarming rate, and they are linked to adverse human health outcomes. Considering that ingestion is a main source of MNPs exposure, the impact of plastics is particularly relevant towards intestinal inflammation and inflammatory bowel disease (IBD). However, the study of MNPs has been limited by obstacles relating to sample collection, preparation, and microplastics analysis based on optical microscopy and chemical analysis, which we detail in this review alongside potential solutions. We summarize available data on human exposure to MNPs and overall health outcomes, with particular focus on data pertaining to intestinal inflammation, microbiome perturbations, and related outcomes. We include ecologic perspectives, and human, in vitro, and animal model studies. We discuss the way forward in MNPs and IBD research, including knowledge gaps and future research.

Microplastic dynamics and risk projections in West African coastal areas: Developing a vulnerability index, adverse ecological pathways, and mitigation framework using remote-sensed oceanographic profiles

Microplastic pollution presents a serious risk to marine ecosystems worldwide, with West Africa being especially susceptible. This study sought to identify the key factors driving microplastic dynamics in the region. Using NASA's Giovanni system, we analyzed environmental data from 2019 to 2024. Results showed uniform offshore air temperatures due to turbulence (25.22-45.62 K) with significant variations nearshore. Salinity levels remained largely stable (4 PSU) but slightly decreased in southern Nigeria. Surface wind speeds rose from 4.206-5.026 m/s in Nigeria to over 5.848 m/s off Mauritania, while eastward stress hotspots were prominent in Nigeria and from Sierra Leone to Senegal. Photosynthetically available radiation (PAR) beam values peaked off Mauritania and dipped from Nigeria to Sierra Leone, with the inverse pattern observed for diffuse PAR. Hotspots of high absorption, particulate backscattering, elevated aerosol optical depth, and remote sensing reflectance all pointed to substantial particulate matter concentrations. The Microplastic Vulnerability Index (MVI) identifies the coastal stretch from Nigeria to Guinea-Bissau as highly vulnerable to microplastic accumulation due to conditions that favor buildup. In contrast, moderate vulnerability was observed from Guinea-Bissau to Senegal and in Mauritania, where conditions were less extreme, such as higher offshore temperatures that could promote widespread microplastic suspension and cooler nearshore temperatures that favor sedimentation. Increased turbulence and temperatures in coastal areas of Senegal and Mauritania may enhance microplastic transport and impact marine life. In Nigeria, stable coastal conditions-characterized by consistent temperatures, low turbulence, and uniform salinity-may lead to increased persistence and accumulation of microplastics in sensitive habitats like mangroves and coral reefs. These findings highlight the need for region-specific management strategies to address microplastic pollution and effectively protect marine ecosystems.

Microplastics distribution, ecological risk and outflows of rivers in the Bohai Rim region of China - A flux model considering small and medium-sized rivers

Microplastics (MPs) pollution and its ecological risks have attracted increasing global attention. The Bohai Rim region (BRR), as the economic and population center of the entire northern China, still lacks a precise assessment of MPs pollution. Although current attention on MPs pollution mainly focuses on large rivers, small and medium-sized rivers are more numerous and more closely connected to human activities. In this study, measurement data of MPs from 11 estuaries in the BRR was collected to understand MPs distribution and ecological risk. The results indicate that the overall MPs pollution in these estuaries is still at a low level, with an average abundance of 1254.3 particles m-3. While the pollution load index (1.85) is relatively low, the potential ecological risk of PVC in some area (S8, EPVC = 1433.78, III) warrants further attention. Then we integrated data from 22 relevant rivers (covering all size rivers) in this region from the literature to fit a MPs flux model and assessed the MPs outflow from the four provinces and cities in the region. A strong correlation is achieved between modeled estimates and field measurements (r2 = 0.74), which can well estimate the river MPs outflows in northern China such as the Nanfei River. The MPs outflow from the four provinces (cities) is calculated to be 123.235 (range 44.415-242.314) T year-1, of which Shandong accounted for >80 % (104.066 T year-1). The small and medium-sized rivers accounted for 47 % (58.08 T year-1), whose contribution to MPs outflows should not be underestimated. This study can help us to accurately assess MPs pollution in different coastal areas in northern China, benefiting the formulation of precise control measures and policies for marine MPs pollution.

Quantitative analysis of microplastics in beach sand via low-temperature solvent extraction and thermal degradation: Effects of particle size and sample depth

Quantifying trace levels of microplastics in complex environmental media remains a challenge. In this study, an approach combining field collection of samples from different depths, sample size fractionation, and plastic quantification via pyrolysis-gas chromatography-mass spectrometry (Py-GC-MS) was employed to identify and quantify microplastics at two public beaches along the northeast coast of the U.S. (Salisbury beach, MA and Hampton beach, NH). A simple sampling tool was used to collect beach sand from depth intervals of 0-5 cm and 5-10 cm, respectively. The samples were sieved to give three size fractions: coarse (>1.2 mm), intermediate (100 μm-1.2 mm), and fine (1.2 μm-100 μm) particles. Following density separation and wet peroxide oxidation, a low-temperature solvent extraction protocol involving 2-chlorophenol was used to extract polyester (PET), polystyrene (PS), polyamide (PA), and polyvinyl chloride (PVC). The extract was analyzed using Py-GC-MS for the respective polymers, while the solid residue was pyrolyzed separately for polyethylene (PE) and polypropylene (PP). The one-step solvent extraction method significantly simplified the sample matrix and improved the sensitivity of analysis. Among the samples, PET was detected in greater quantities in the fine fraction than in the intermediate size fraction, and PET fine particles were located predominantly in the surface sand. Similar to PET, PS was detected at higher mass concentrations in the fine particles in most samples. These results underscore the importance of beach environment for plastic fragmentation, where a combination of factors including UV irradiation, mechanical abrasion, and water exposure promote plastic breakdown. Surface accumulation of fine plastic particles may also be attributed to transport of microplastics through wind and tides. The proposed sample treatment and analysis methods may allow sensitive and quantitative measurements of size or depth-related distribution patterns of microplastics in complex environmental media.

The effects of polystyrene microplastics on feeding, growth, and trophic upgrading of protozoan grazers

Microplastics have become ubiquitous in the global marine environment, posing substantial influences on marine organism health, food web function and marine ecosystem structure. Protozoan grazers are known for their ability to improve the biochemical constituents of poor-quality algae for subsequent use by higher trophic levels. However, the effects of microplastics on the trophic upgrading of protozoan grazers remain unknown. To address this knowledge gap, the ciliate Euplotes vannus and the heterotrophic dinoflagellate Oxyrrhis marina were exposed to microplastic particles (5 μm) for four days with various concentrations (1-20 mg/L). Both O. marina and E. vannus ingested microplastics. At the exposure level of 20 mg/L, the ingestion rate, growth rate, biovolume, and carbon biomass of E. vannus were significantly decreased by 28.18 %, 32.01 %, 30.46 %, and 82.27 %, respectively, while such effects were not observed for O. marina. The contents of highly unsaturated fatty acids in O. marina and E. vannus on a mixed diet of microplastic particles and green algae significantly reduced by 8.66 % and 41.49 % relative to feeding only on green algae, respectively. Besides, we also observed an increase in the composition of C18:3 (ω-3) and C20:3 (ω-3) concurrence with a significant decrease in C16:0 and C18:0 in E. vannus after 96 h exposure at 20 mg/L. These results indicate that microplastics can weaken trophic upgrading of the nutritional quality by protozoan grazers, which may consequently alter the function of food webs.

How plastic litter sunk by biofouling recovers buoyancy - The role of benthic predation

Estimates suggest that the amount of plastic litter discarded in the ocean is several times greater than what remains floating at the sea surface, raising questions about the fate of this marine debris. Fouling-induced sinking of plastic litter is one of the proposed mechanisms responsible for this mass difference. While some of this 'missing' plastic mass may be explained by the effects of fouling, it has also been hypothesized that sinking litter may return to the surface after benthic organisms consume the biofouling. However, this hypothesis has never been tested. The present study evaluated the structure and biomass of the fouling community in response to benthic predation in both summer and winter seasons. Floating PVC plates were installed during winter and summer in central Chile (36°S) until the growing biofouling community caused them to sink. Plates were then moved to the seabed, where they were exposed to benthic predation, while control plates were maintained in a mesh cage impeding predator access. In summer, all plates recovered their buoyancy, while in the winter only 60 % recovered buoyancy. All caged control samples remained on the bottom in both seasons. The community structure differed both in the treatments and across the seasons, with plates that recovered buoyancy initially being dominated by Ulva sp. and Ciona robusta. Conversely, plates that did not refloat were mainly covered by species resistant to predation such as Pyura chilensis, Austromegabalanus psittacus, and Balanus laevis. Thus, fouling community structure influences how predation facilitates buoyancy recovery, because not all epibionts can be consumed by predators. While previous studies had shown how fouling organisms cause sinking of floating litter, this is the first study to provide experimental evidence that predation can reverse this process and allow litter to resurface and become again available as dispersal vectors for native and invasive species.

High-altitude aquatic ecosystems offer faster aging rate of plastics

While research on the aging behavior of plastics in aquatic systems is extensive, studies focusing on high-altitude ecosystems, characterized by higher solar radiation and lower temperatures, remain limited. This study investigated the long-term aging behavior of non-biodegradable plastics (non-BPs), namely polyethylene terephthalate (PET) and polypropylene (PP) and biodegradable plastics (BPs), specifically polylactic acid plus polybutylene adipate-co-terephthalate (PLA + PBAT) and starch-based plastic (SBP), in a tributary of the Yarlung Zangbo River on the high-altitude Tibetan Plateau. Over 84 days of field aging, all four types of plastics exhibited initial rapid aging followed by deceleration. This aging process can be divided into two phases: rapid surface oxidation aging and an aging plateau phase. Notably, PP aged at a rate comparable to BPs, contrary to expectations of faster aging for BPs. Compared to low-altitude aquatic ecosystems, plastics in this study showed a faster aging rate. This was primarily due to intense ultraviolet radiation causing severe photoaging. Furthermore, the lower temperatures contributed to the formation of thinner biofilms. These thinner biofilms exhibited a reduced capacity to block light, further exacerbating the photoaging process of plastics. Statistical analysis results indicated that temperature, total nitrogen TN, and total phosphorus TP were likely the main water quality parameters influencing plastic aging. The varying effects of water properties and nutrients underscore the complex interaction of water quality parameters in high-altitude environments. Given the delicate nature of the high-altitude environment, the environmental impact of plastics, especially BPs, warrants careful consideration.

Enrichment characteristics of microplastics in Antarctic benthic and pelagic fish and krill near the Antarctic Peninsula

Global microplastic pollution has garnered widespread attention from researchers both domestically and internationally. However, compared to other regions worldwide, little is known about microplastic pollution in the marine ecosystems of the Antarctic region. This study investigated the abundance and characteristics of microplastics (MPs) in the gills and intestines of 15 species of Antarctic fish and Antarctic krill (Euphausia superba). The results indicate that the abundance of MPs in Antarctic fish and E. superba ranged from 0.625 to 2.0 items/individual and 0.17 to 0.27 items/individual, with mean abundances of 0.93 ± 0.96 items/individual and 0.23 ± 0.44 items/individual, respectively. Antarctic fish ingested significantly more MPs than E. superba. There was no significant difference in the abundance of MPs between the gills and intestines of Antarctic fish. However, the quantity of pellet-shaped MPs in the gills was significantly higher than in the intestines. The depth of fish habitat influenced the quantity and size of MPs in their bodies, with benthic fish ingesting significantly fewer MPs than pelagic fish. Pelagic fish ingested significantly more MPs sized 1-5 mm than benthic fish. Additionally, analysis of the characteristics of MPs revealed that fiber-shaped MPs were predominant in shape, with sizes generally smaller than 0.25 mm and 0.25-0.5 mm. The predominant colors of MPs were transparent, red, and black, while the main materials were polypropylene (PP), polystyrene (PS), polyamide (PA), and polyvinyl chloride (PVC). Compared to organisms from other regions, the levels of MPs in Antarctic fish and E. superba were relatively low. This study contributes to a better understanding of the extent of MP pollution in Antarctic fish and E. superba, aiding human efforts to mitigate its impact on the environment.

Sorption of trace metals by macro- and microplastics within intertidal sediments: Insights from a long-term field study within Burrard Inlet, British Columbia, Canada

Plastics are now the dominant fraction of anthropogenic marine debris and as a result of their long residence times, it is important to determine the threats that plastics present to marine ecosystems including their ability to sorb a diversity of environmental pollutants such as trace metals. To address this knowledge gap, this study examined the sorption of cadmium (Cd), copper (Cu), mercury (Hg), lead (Pb), and zinc (Zn) by macro- and microplastics of polyethylene terephthalate (PETE) and high-density polyethylene (HDPE) within marine intertidal sediments in a human-impacted area of Burrard Inlet (British Columbia, Canada). Trace metal sorption by macro- and microplastics was dependent on 1) polymer characteristics, notably the aging of the plastic over the duration of the field experiment as shown by the formation of new peaks via FTIR spectra; and 2) amounts of sediment organic matter, where the sorption of trace metals by the plastic particles decreased with increasing organic matter content (from 2.8 % to 15.8 %). Plastic particles play a minor role in trace metals sorption in the presence of organic matter at high concentrations as a result of competitive adsorption. Overall, the interaction of trace metals with sediment plastics was highly dynamic and to understand the key processes controlling this dynamic requires further study. This work contributed to our understanding on metal-plastic interactions in coastal intertidal sediments from urban environments and serve to support plastic pollution risk management and bioremediation studies.

Shear induced remobilization of buried synthetic microfibers

Microplastics are known to accumulate in sediment beds of aquatic environments where they can be buried. Once buried they can remobilize due to high energetic events, entering the water column again. Here, turbulence induced by an oscillating grid device was used to investigate the remobilization of microfibers (MF) buried into the sediment bed. Four different types of plastic fibers commonly used for several industrial applications (PET, PP, PA and LDPE) and two types of soils (cohesive and non-cohesive) were investigated. Particles were in depth characterized via 3D reconstruction to estimate important parameters like the Corey shape factor and the settling velocity. Experimental runs explored a wide range of shear stresses. Measurements were taken at different time steps (between 15 min and 240 min from the start of each run). The results have shown that the remobilization of MFs is directly proportional to the value of the shear rate and the duration of the disturbance. Also, buoyant MFs were found more prone to remobilize respect to the denser ones. Drawing from experimental observations of the key parameters affecting MF remobilization, a non-dimensional predictive model was developed. A comparison with previous studies was performed to validate the model in order to predict MF remobilization in aquatic environments.

Rethinking geological concepts in the age of plastic pollution

This paper attempts to reevaluate traditional geological classifications from sedimentology to stratigraphy as well as the concept of the Holocene/Anthropocene epochs, characterized by the widespread integration of plastics into sedimentary environments. This paper presents a set of novel insights into the interactions between synthetic materials and natural geological processes. We illustrate how plastics not only disrupt sedimentary dynamics and alter the composition of rocks and soils, creating new forms of pollution and also pose escalated threats to marine biodiversity through altered erosion, transport, and deposition patterns. We highlight the emerging role of plastics as distinctive stratigraphic markers, providing a different perspective on human environmental impacts. This analysis challenges the traditional perception of rocks as solely natural, inorganic formations and highlights the critical need for interdisciplinary approaches that meld geology, chemistry, and environmental science. The document calls for intensified research to develop effective strategies for managing these impacts and promotes innovative conservation techniques that address both the symptoms and sources of plastic pollution.

Effect of alternative natural diet on microplastic ingestion, functional responses and trophic transfer in a tri-trophic coastal pelagic food web

The patchy distribution of microplastics (MP) and their size range similar to planktonic organisms, are likely to have major ecological consequences, through MP ingestion, food dilution, and transfer across trophic levels. Our study applied a community module using tritrophic food chain with zooplankton as prey, and a planktivorous seabass fry as predator. We conducted a series of feeding experiments and recorded the direct uptake of MP under six different concentrations ranging from 25 to 800 particles L-1. We also estimated the indirect transfer of MP via trophic link. The ingestion rates for Brachionus plicatilis, Mesocyclops isabellae, and Lates calcarifer, were 3.7 ± 0.3 MP ind-1 min-1, 1.69 ± 0.1 MP ind-1 min-1, and 3.51 ± 0.52 MP ind-1 h-1, respectively. In the presence of a natural diet, rotifers and copepods ingested significantly lower number, whereas, fish fry ingested a higher number of MP, suggesting further vulnerability to the consumers of MP-contaminated fish and potential biomagnification at higher trophic levels. Overall, the MP uptake rate increased with increasing concentration, and finally leveled off, indicating a type II functional response to MP concentration. The presence of natural diet led to a lower Km value. In the indirect transfer experiment, 74 % of B. plicatilis and 78 % of M. isabellae individuals were contaminated with MP, when offered as prey. Brachionid mastax and MP particles were observed in the gut of copepods. The fish fry gut content also recorded brachionid mastax, MP-contaminated copepods, and MP particles, showing direct evidence of trophic transfer pointing to a cascading effect on higher trophic levels including humans via piscivory.

Ingestion of chitosan-starch blends: Effect on the survival of supralittoral amphipods

Sandy beach ecosystems are particularly affected by plastic pollution. Supralittoral amphipods are important components of the food web in sandy beaches and their ability to ingest microplastics and bioplastics has been assessed. Chitosan, a polysaccharide obtained by deacetylation of chitin, the second most abundant polymer in the world, represents an interesting component to produce novel bioplastics in combination with other biopolymers like starch. Here, the possibility of ingesting chitosan-starch blends and the possible effects on the amphipod Talitrus saltator were investigated. Groups of adult individuals were fed with sheets containing mixtures of chitosan and starch in different percentages for 7 and 14 days. The results showed that chitosan ingestion is dependent on the percentage of starch present in the mixture. Moreover, FTIR analyses of both sheets and faecal pellets after consumption show that chitosan is not digested. Furthermore, the survival rate of amphipods fed with a mixture of chitosan and starch decreases after one week compared to the control groups (100 % starch and paper), and drops drastically to 0 % after two weeks the experiment began. In addition, consumption of 100 % chitosan is negligible. Therefore, the results of the experimental observations evidenced that chitosan is avoided as food resource and its consumption significantly affects the survival capacity of T. saltator. It is emphasized that the release of mixtures of chitosan and starch into the marine environment appears to be dangerous for littoral amphipods.

Spatial distribution of microplastics in the Gulf of Cadiz as a function of their density: A Lagrangian modelling approach

Microplastics (MPs) are distributed throughout the world oceans and represent one of the greatest environmental concerns of marine pollution. In the Gulf of Cadiz (GoC), MPs are found throughout the water column, on the seafloor, and accumulated within commercial marine species, primarily due to discharges from the main estuaries. The aim of this study was to analyse the transport pathways, spatial distribution, and accumulation regions of MPs in the GoC based on their density and source. For this, a Lagrangian transport model was coupled to a high-resolution hydrodynamic model and four particle sources were considered: Cape San Vicente, Guadiana Estuary, Guadalquivir Estuary, and Bay of Cadiz/Guadalete River. To account for the diversity of plastics detected in the GoC, particles with ten different densities were used, from low-density to high-density polymers. This study indicates that a significant proportion of low-density MPs accumulate near their sources and within the top few centimetres of the water column due to local surface currents. The Guadalquivir and Guadiana estuaries are the primary contributors to the high accumulation of low-density MPs on the GoC eastern shelf, consistent with previous field studies identifying these estuaries as the main sources of MPs into the region, including polyethylene and polypropylene. In contrast, the Bay of Cadiz/Guadalete River seems to be the primary source of low-density MPs in offshore waters within the uppermost meter of the water column, influenced by local mesoscale features. The Guadalquivir Estuary seems to be the main source of high-density MPs into the continental shelves, such as polystyrene, polyamide, and polyvinyl chloride, followed by the Bay of Cadiz/Guadalete River, and to a lesser extent, the Guadiana estuary. These MPs accumulate near their sources at depths of 3.5 to 50 m due to their high sinking rates, but can also be transported offshore by deep currents, either northwards along the Portuguese offshore waters or westwards off the GoC offshore region.

Capillary Skimming of Floating Microplastics via a Water-Bridged Ratchet

Floating microplastics (MPs) have recently become a major concern in marine pollution; however, current filter-based technology is hardly effective for directly removing such MPs from the water surface because of specific mesh size and clogging issues. This paper introduces a new skimming concept for removing floating MPs utilizing capillary force mediated by the elevation of a hydrophilic ratchet at the air-water interface. MPs floating near the ratchet surface are spontaneously forced toward the ratchet with a concave water meniscus, driven by the Cheerios effect. The MPs can then be skimmed and temporarily held by the deforming concave water meniscus as the ratchet rises. Here, it is found that the stability of the water bridge plays a crucial role in skimming success because it provides capillary adhesion between the MP and the ratchet. The proposed capillary skimming method is observed to be effective across nearly all types of floating MPs, ranging in size from 1 to 4 mm, and with densities varying from 0.02 to 0.97 g cm- 3, which is also demonstrated by a prototype of marine robot cleaner.

Assessing the interaction between 4-methylbenzylidene camphor and microplastic fibers in aquatic environments: Adsorption kinetics and mechanisms

Wastewater treatment plants play a crucial role in managing environmental pollutants, but they often release persistent contaminants like synthetic microplastic fibers (MPFs) into ecosystems. These microplastics, mainly from the textile industry and domestic washing of synthetic fabrics, are a major type of microplastic found in aquatic environments. Some harmful chemicals have an affinity for these microplastics, making them vectors for contaminants. This study investigates the adsorption of 4-methylbenzylidene camphor (4-MBC), an organic UV filter, onto microplastic fibers from two different sources. Batch experiments conducted at room temperature (25 °C) under laboratory conditions assessed the adsorption kinetics and mechanisms. Morphological and visual characterization of the microplastic fibers was done using optical microscopy and scanning electron microscopy (SEM), revealing diverse shapes, types, and colors. Physico-chemical properties were confirmed through thermogravimetric analysis (TGA) and Fourier-transform infrared spectroscopy (FTIR). The data matched well with the PSO kinetic model and Langmuir isotherm, indicating monolayer chemisorption with equilibrium achieved within 24 h. The adsorption mechanisms involved electrostatic attraction, hydrogen bonding, and π-π interactions. Both types of microplastic fibers exhibited a tendency to adsorb 4-MBC, indicating the significance of this research in understanding the interactions between this compound and various fiber types emphasizing the need for further research under the different environmental conditions.

Mechanisms underlying mitochondrial dysfunction and intestinal damage induced by ingestion of microplastics in Leuciscus waleckii: The role of the NF-κB/Nrf2 signaling pathway

This study investigates the impact of polystyrene microplastics (PS-MPs) on the growth, immunity, oxidative stress, mitochondrial function, and intestinal health of Leuciscus waleckii (3.00±0.02 g) juveniles over 8 weeks. Our findings indicate that exposure to PS-MPs negatively affected the growth of Leuciscus waleckii, resulting in digestive disturbances. Furthermore, PS-MPs triggered immune dysfunction and oxidative stress through the activation of the NF-κB pathway and suppression of the Nrf2 signaling cascade. PS-MPs damaged intestinal tissue and compromised the intestinal barrier. Additionally, mitochondrial homeostasis was disrupted, activating endogenous mitochondrial apoptotic pathways, ultimately leading to cell apoptosis. High-throughput 16S rRNA sequencing disclosed that PS-MPs provoked shifts in the intestinal microbiota. Mantel analysis indicates significant correlations between growth parameters and the activities of enzymes related to antioxidant defense, immunity, apoptosis, and mitochondria, as well as with the gut microbiota. In summary, our study reveals that PS-MPs induce intestinal inflammation and oxidative stress in Leuciscus waleckii by activating the NF-κB pathway and the intrinsic mitochondrial apoptotic pathway while repressing the Nrf2 signaling, ultimately leading to cellular apoptosis, mitochondrial dysfunction, intestinal microbiota imbalance, and growth inhibition.

Low-Energy Photoresponsive Magnetic-Assisted Cleaning Microrobots for Removal of Microplastics in Water Environments

In the global ecosystem, microplastic pollution pervades extensively, exerting profound and detrimental effects on marine life and human well-being. However, conventional removal methods are usually limited to chemical flocculation and physical filtration but are insufficient to remove extremely small microplastics. Therefore, developing a comprehensive strategy to address the threat posed by microplastics is imperative. Here, we report a low-energy photoresponsive magnetic-assisted cleaning microrobot (LMCM) composed of photocatalytic material (Ag@Bi2WO6) and magnetic nanoparticles (Fe3O4), which can be used for the active removal of microplastics from water environments. Due to the diffusion electrophoresis effect, the low-energy photoresponsive cleaning microrobots (LCMs) are formed by spontaneous assembly of Ag@Bi2WO6, which can continuously adsorb microplastics in a water environment. Particularly, the effective attraction distance of LCMs on microplastics exceeds 100 μm. After assembling the Fe3O4 nanoparticles, LMCMs can clean microplastics in groups from water environments under the control of a magnetic field. Utilizing precision manipulation and group control, LMCMs demonstrate a remarkable 98% cleaning efficiency in 93 s and can be recovered under the control of the directional magnetic field. This eco-friendly and energy-efficient microrobot is expected to provide a viable strategy to tackle the threat of microplastics or promote industrial microplastic removal.

Quantifying microplastics in sediments of Jinzhou Bay, China: Characterization and ecological risk with a focus on small sizes

Small-sized microplastics (MPs) pose greater ecological toxicity due to their larger surface area, which makes them more likely to act as carriers for other pollutants and to be ingested by aquatic organisms. However, traditional visual analysis often neglects small-sized MPs and their associated ecological risk. This study utilized Laser Direct Infrared (LDIR) spectroscopy and traditional visual analysis to examine MPs in 31 sediment samples from Jinzhou Bay, a typical semi-enclosed bay located at the economic center of Dalian, China. The results showed significant heterogeneity in MP distribution, with averages of 1192 and 2361 items/kg dry weight reported by visual analysis and LDIR spectroscopy, respectively. LDIR spectroscopy identified MPs as small as 10 μm, with the majority of MPs (89.21 %) within the 10-250 μm range, and a significant proportion (46.45 %) between 10 and 50 μm among them. However, visual analysis was limited to detecting MPs >50 μm, and significant portions were identified between 50 and 100 μm (49.36 %) and 100-250 μm (31.01 %), missing a substantial fraction of smaller MPs. The predominant polymers identified were polyamide (PA), polyethylene (PE), polypropylene (PP), polyethylene terephthalate (PET), and acrylonitrile butadiene styrene (ABS). LDIR spectroscopy demonstrated a strong positive correlation between MP abundance and clay content, a relationship not observed with traditional visual analysis. The Potential Ecological Risk Index (PERI) indicated that over 87 % of sites posed an extremely high risk according to LDIR spectroscopy, compared to 51 % by traditional visual analysis. These discrepancy underscores the underestimation of ecological risks by traditional methods, particularly for small-sized MPs. High-risk polymers such as polyvinyl chloride (PVC), ABS, and polyurethane (PUR) significantly influenced PERI values. These findings highlight the critical need for precise identification and thorough risk assessment of small-sized MPs in environmental studies and offer insights for understanding of MP vertical migration in aquatic environments, particularly in the context of co-settlement with sediments.

Arctic threads: Microplastic fibres in Chukchi and Beaufort sea sediments

The influx of microplastics (MPs) into the Arctic Ocean poses a collective risk, particularly with pronounced sea ice depletion due to global warming. A total of 73 replicate sediment samples were collected at different depths (38 to 79 m) from Chukchi and the Beaufort Seas at 8 stations in the Arctic region during the R/V Mirai cruise (MR22-06C) from August to September 2022. The average concentration of MPs is 79.25 ± 31.08 items/kg d.w. Fibrous MPs of 0-1 mm size range are predominant, with blue being the most prevalent colour. Polymer characterization identified polyethylene (PE) as the predominant polymer. Arctic Ocean regions face heightened health risks from the coexistence of MPs and harmful additives, amplifying concerns over plastic pollution. The alarming surge in MPs within Arctic sediment underscores the urgent need for a proactive, collaborative approach to mitigate this environmental threat and its far-reaching impacts.

Quantification of ocean microplastic fragmentation processes in the Sea of Japan using a combination of field observations and numerical particle tracking model experiments

This study estimated the fragmentation rate of microplastics (MiPs) in the Sea of Japan by analyzing MiP size over time following their generation from macroplastics (MaPs). A 5-year particle-tracking model was used to simulate the MaP and MiP motions driven by ocean currents, Stokes drift, the windage of MaPs, beaching, re-drifting, the conversion process from MaPs to MiPs, and the removal of MiPs from the upper ocean. MiP sizes decreased downstream in the Tsushima Current flowing northeastward. The highest correlation between MiP size and elapsed time occurred in the simulation where MiP fragmentation also occurred in the ocean, at 20 % of the rate on beaches. The apparent fragmentation rate in nature was estimated to approximately 1.0 mm/100 days. This study demonstrated that incorporating spatiotemporal information from the simulation into observed size results could further our understanding of fragmentation of MiPs degraded in marine environments.

Microplastic and antibiotics in waters: Interactions and environmental risks

Antibiotics (ATs) are ubiquitously detected in natural waters worldwide, and their tendency to co-migrate with microplastics (MPs) post-adsorption leads to heightened environmental risk. Research on the adsorption of ATs on MPs and their subsequent effects on the environmental risks is gaining significant attention globally. This adsorption process predominantly occurs through hydrophobic forces, hydrogen bonds, and electrostatic interactions and is influenced by various environmental factors. The interaction between MPs and ATs exhibited varying degrees of efficiency across different pH levels and ionic strengths. Furthermore, this paper outlines the environmental risks associated with the co-presence of MPs and ATs in aquatic environments, emphasizing the potential effect of MPs on the distribution of antibiotic resistance genes (ARGs) and related environmental risks. The potential hazards posed by MPs and ATs in aquatic systems warrant serious consideration. Future research should concentrate on the adsorption of ATs/ARGs on MPs under real environmental conditions, horizontal gene transfer on MPs, as well as biofilm formation and agglomeration behavior on MPs that needs to be emphasized.

Polystyrene Microplastics Induce Injury to the Vascular Endothelial Through NLRP3-Mediated Pyroptosis

The health risks associated with microplastics have attracted widespread attention. Polystyrene microplastics (PS-MPs) can induce damage to cardiac tissue, while pyroptosis-mediated injury to the vascular endothelial plays a vital role in the pathogenesis of cardiovascular diseases. The study intended to explore the role and mechanism of NLR family pyrin domain containing 3 (NLRP3) mediated pyroptosis in PS-MPs causing the injury of vascular endothelial cells. In vivo, Wistar rats were exposed to 0.5, 5, and 50 mg/kg/d 0.5 μm PS-MPs. In vitro, the human vascular endothelial cells (HUVECs) were used for mechanistic studies. siRNA was used for silencing the NILRP3 gene. H&E staining and flow cytometry were performed to examine the vascular injury and cell membrane damage. The oxidative stress was detected by flow cytometry, immunofluorescence, and corresponding kits. ELISA were used to measure the levels of inflammatory factors. Real-time PCR and western blot were used to measure the expression of pyroptosis signaling pathway. In rats, PS-MPs could cause vascular damage, oxidative stress, and inflammatory response, and activated the pyroptosis signaling pathway. HUVECs exposure to PS-MPs, the vitality decreased in a dose-dependent manner, ROS and MDA were significantly increased while SOD was decreased. PS-MPs induced the onset of pyroptosis signaling pathway in HUVECs. Cell membrane damage and the levels of IL-Iβ and IL-18 in HUVECs significantly increased, those are symbols for the development of pyroptosis. Inhibition of NLRP3-mediated pyroptosis effectively protected HUVECs from PS-MPs-induced damage. Pyroptosis played a vital role in controlling the vascular endothelial injury caused by PS-MPs.

Lactating exposure to microplastics at the dose of infants ingested during artificial feeding induced reproductive toxicity in female mice and their offspring

Microplastics (MPs) pollution poses a global environmental challenge with significant concerns regarding its potential impact on human health. Toxicological investigations have revealed multi-system impairments caused by MPs in various organisms. However, the specific reproductive hazards in human contexts remain elusive, and understanding the transgenerational reproductive toxicity of MPs remains limited. This study delves into the reproductive toxicity resulting from lactational exposure to polystyrene MPs (PS-MPs) in female mice, extending the inquiry to assess the reproductive effects on their offspring bred by rigorous natural mating. The MPs dosage corresponds to the detected concentration in infant formula prepared using plastic bottles. By systematically evaluating the reproductive phenotypes of F0 female mice from birth to adulthood, we found that female mice exposed to PS-MPs exhibited delayed puberty, disturbed estrous cyclicity, diminished fertility, elevated testosterone, abnormal follicle development, disrupted ovarian steroidogenesis, and ovarian inflammation. Importantly, the observed inheritable reproductive toxicity manifested with gender specificity, showcasing more pronounced abnormalities in male offspring. Specifically, reproductive disorders did not manifest in female offspring; however, a significant decrease in sperm count and viability was observed in PS-MPs-exposed F1 males. Testicular transcriptomics analysis of F1 males significantly enriched pathways associated with reproductive system development and epigenetic modification, such as male germ cell proliferation, DNA methylation, and histone modification. In summary, real-life exposure to PS-MPs impaired the reproductive function of female mice and threateningly disrupted the spermatogenesis of their F1 male offspring, which raises serious concerns about inter- and trans-generational reproductive toxicities of MPs in mammals. These findings underscore the potential threats of MPs to human reproductive health, emphasizing the need for continued vigilance and research in this critical area.

Nonbiodegradable microplastic types determine the diversity and structure of soil microbial communities: A meta-analysis

As an emerging contaminant, microplastics (MPs) have received considerable attention for their potential threat to the soil environment. However, the response of soil bacterial and fungal communities to MPs exposure remains unclear. In this study, we conducted a global meta-analysis of 95 publications and 2317 observations to assess the effects of nonbiodegradable MP properties and exposure conditions on soil microbial biomass, alpha and beta diversity, and community structure. Our results indicate that MPs increased (p < 0.05) soil active microbial biomass by 42%, with the effect varying with MPs type, exposure concentration, exposure time and soil pH. MPs concentration was identified as the most important factor controlling the response of soil microbial biomass to MPs. MPs addition decreased (p < 0.05) the soil bacterial Shannon and Chao1 indices by 2% and 3%, respectively, but had limited effects (p > 0.05) on soil fungal Shannon and Chao1 indices. The type of MPs and exposure time determined the effects of MPs on bacterial Shannon and Chao1 indices, while the type of MPs and soil pH controlled the response ratios of fungal Shannon and Chao1 indices to MPs. Specifically, soil organic carbon (SOC) was the major factor regulating the response ratio of bacterial alpha diversity index to MPs. The presence of MPs did not affect soil bacterial community structure and beta diversity. Our results highlight that MPs reduced bacterial diversity and richness but increased the soil active microbial biomass, suggesting that MPs could disrupt biogeochemical cycles by promoting the growth of specific microorganisms.

Incorporation of plastic debris into the nests of great cormorants (Phalacrocorax carbo sinensis) in the Gulf of Finland

Several bird species are known to utilise marine debris among their nest materials in different parts of the world. This study examines the prevalence of debris in cormorant nests in the Gulf of Finland, focusing mainly on plastic debris. 200 nests were sampled on four different nesting islets, and plastic debris in the nest was counted and classified according to their type, colour, origin and polymer type. In total, 58 % of the nests contained debris (95 % plastics), but the prevalence of debris in the nests varied between the colonies. Core nests contained more debris than periphery nests. The relative number of threadlike plastics in the nests was higher than that in the surrounding environment, indicating active selection by cormorants. Based on the results, nest surveys could be a useful tool in evaluating the effectiveness of certain reduction measures aiming to tackle marine plastic pollution in the Baltic Sea.

Stability and reliability of regional cumulative impact mapping: A Canadian Pacific case study

Cumulative impact mapping is a commonly applied spatial representation of the impacts of human activities on the ocean. This spatial model has been applied at varying scales around the world, in part due to its ability to visually communicate complicated information in a simple way. The application of the model to decision-making processes requires an understanding of the reliability and stability of its outputs. This paper represents both an updated regional application in Pacific Canada and an evaluation of the tool over two iterations, 2015 and 2023. The regional application utilised higher model resolution and new and improved data inputs including 38 habitats and 46 activities across five sectors. High impact hotspots were found around major population centres and ports, as well as in fishing and shipping areas along the continental shelf. Commercial fishing, shipping, and climate change (sea surface temperature change) remained the major drivers of cumulative impacts in the region, and cumulative impacts per unit area continued to be highest in kelp and seagrass. Results suggest evidence of decreased impacts where improved protection for sponge reefs were implemented but show an overall increase in cumulative impacts for the region. Results showed consistency and reliability in the location of cumulative impact hotspots. Refinements in data quality and resolution of spatial data inputs contributed towards increasing the spatial precision of hot spot areas identified. Confidence in the cumulative impact mapping outputs and applications for marine spatial planning, marine protected area designation and management, research, and decision support are discussed.

Microplastics in faeces of European shags Gulosus aristotelis in central Norway

Plastic pollution is an increasing problem in the marine environment, and microplastics are frequently ingested by wildlife, including seabirds. Faeces are an increasingly used matrix to quantify egested microplastics. We investigated microplastics in 36 faeces samples from chicks of European shags (Gulosus aristotelis) sampled at Sklinna, central Norway in 2021. Small particles <300 μm (62 %) dominated the material. Out of 465 particles measured with Raman spectroscopy, 32 were identified as microplastics (21 fragments, 4 fibres). 69.4 % of faecal samples contained microplastics, with on average 17 microplastic particles per g faeces dry weight. Sixteen of the 36 samples originated from siblings sampled within the same hour, and plastic loads of these samples were more similar to each other compared to those from other individuals. This suggests that a sample from one chick is representative for all siblings at a given moment in time and proofs parental transfer of MP.

Concentrations and carbonyl index of microplastic in surface seawater in southeastern coastal region off Japan, Northwestern Pacific

In this study, microplastic concentrations in the southeastern coastal regions of Japan were measured along the northward ocean current at seven stations from Okinawa to Tokai region. Concentrations ranged from 0.014 to 0.094 pieces/m3, except for a station near the Bungo Channel mouth, which had 0.723 pieces/m3. Polystyrene (PS) foam was most prevalent near the east side of Kyushu, suggesting origination from nearby coastal areas. Fragmentation levels were higher in the Tokai region. In addition, carbonyl index (CI) of polyethylene (PE) microplastics increased northward, indicating northward movement from southern regions. Standard PE microplastics showed chemical treatment does not significantly alter CI values. Further spectral analysis suggested potential oxidation of polypropylene (PP) and PS foam by chemical treatment. This study provides a comprehensive understanding of the abundance, distribution, and characteristics of microplastics in the southeastern coastal regions of Japan in the northwest Pacific, enhancing the understanding of environmental fate of microplastics.

High frequency of plastic ingestion in procellariiform seabirds (albatrosses, petrels and shearwaters) in the Southwest Atlantic Ocean

Ocean pollution by plastics is a growing concern for marine wildlife conservation, and seabirds are particularly prone to ingest plastics. We report baseline information on plastic ingestion in 17 procellariiform species along the coast of Brazil and Argentina. Through a collaborative regional effort we found plastic items in 30.2 % of seabird carcasses examined (n = 192), comprised predominantly by mesoplastics (5-25 mm), user plastics, polypropylene, polystyrene and polyethylene. Considering the most representative source-site cohorts, the frequency of occurrence of plastic items varied significantly between sampling site and source of carcasses. Ingestion was highest in petrels and shearwaters. Immature birds ingested the largest number (and total mass) of plastic items followed by chicks and adults. Long-term programs applying standardized sampling protocols are needed to detect spatiotemporal patterns of plastic ingestion across species, and assess the potential effectiveness of remediation actions. Further studies are necessary to assess currently unrecognized health effects of plastic ingestion.

Adsorption behavior and quantum chemical analysis of surface functionalized polystyrene nano-plastics on gatifloxacin

In this paper, the adsorption of gatifloxacin (GAT) by three types of polystyrene nano-plastics (PSNPs), including 400 nm polystyrene (PS), amino-modified PS (PS-NH2), and carboxyl-modified PS (PS-COOH) was studied and the adsorption mechanism were assessed. Experimental findings revealed that the equilibrium adsorption capacity of PSNPs to GAT followed the order PS-NH2 > PS-COOH > PS. The adsorption was regulated by both physical and chemical mechanisms, with intra-particle and external diffusion jointly controlling the adsorption rate. The adsorption process was heterogeneous, spontaneous, and entropy-driven. Sodium chloride (NaCl), alginic acid, copper ions (Cu2+), and zinc ions (Zn2+) inhibited adsorption, with Cu2+ and Zn2+ having the strongest effect on PS-NH2. Theoretical computations indicated that π-π and electrostatic interactions dominated PS adsorption of GAT, while PS-COOH and PS-NH2 adsorbed GAT through electrostatic interactions, hydrogen bonds, and van der Waals (vdW) forces. The surface electrostatic potential of PS-COOH and PS-NH2 was considerably higher than that of PS, with the maximum vdW penetration distance of GAT-PS-NH2 being 1.20 Å. This study's findings provide a theoretical foundation for the migration and synergistic removal of antibiotics, micro-plastics (MPs), and nano-plastics (NPs).

A critical review of microplastics in the shrimp farming environment: Incidence, characteristics, effects, and a first mass balance model

This review provides a critical overview of the sources, incidence, accumulation, effects, and interactions of microplastics (MPs) with other contaminants in the shrimp aquaculture environment, emphasizing this sector's challenges and future implications. A first and novel mass MPs balance model was developed to explore the fate and fluxes of MPs within shrimp farming systems. Two literature searches were conducted: one focused on MPs, crustaceans, and shrimp in aquaculture, and other on the effects of MPs in crustaceans, emphasizing shrimp. A total of 78 and 461 peer-reviewed papers were retrieved, respectively. This review details aspects of MPs in the shrimp farming environment, including water, sediments, food, zooplankton, and shrimp tissues. MPs can act as vectors for contaminants, including biological and chemical substances commonly used in shrimp aquaculture. A primary concern is the interaction between MPs and pathogens; thus MPs can facilitate the transport and retention of disease-causing agents. Key questions involve identifying which pathogen groups are most efficiently transported by MPs and how this may exacerbate disease outbreaks in aquaculture. This suggests that microorganisms can establish on MPs surfaces to disseminate an infection. Therefore, the possibility of disease outbreaks and epidemics is expected to rise as MP abundance increases. The mass balance shows that the primary source of MPs is associated with water during the filled (19.3 %) and water exchange (77.2 %) of shrimp ponds, indicating that MPs in the water input play a critical role in the MP dynamic in the shrimp farming environment. However, this initial mass balance model has several weaknesses, including liming, atmospheric deposition, and natural food, which must be addressed as other MPs suppliers. Macrofauna that incidentally enters shrimp ponds may also constitute a significant part of the MPs inventory. Future research should focus on the impact of polystyrene and polyethylene fibers commonly found in crustacean tissues.

Plastic use as nesting material can alter incubation temperature and behaviour but does not affect yellow-legged gull chicks

Optimal incubation temperature is crucial for embryos' development and survival. With the increasing use of plastics in gulls' nests, it is essential to understand how their incorporation affects incubation temperature, parental behaviour, and hatching success. Considering this, we conducted an experiment where plastic was introduced into yellow-legged gulls (Larus michahellis) nests. The experiment comprised three groups: a control group, a group with low amount of plastic, and a third with a high amount of plastic. This design allowed us to investigate the effects of plastic on 1) the heart rate of incubating adults, 2) the number and duration of adults' absences from their nest, 3) how the presence or absence of the adult influenced egg temperature, and 4) chick hatching success, physiological parameters, and bill colour phenotype. We observed that incubation temperature was consistently higher in nests with plastic. The number of absences was higher in the low plastic group at increased temperatures, though the duration was significantly lower in both plastic groups than in the control, possibly to mitigate the effects of heat stress. During higher environmental temperatures, heart rate was higher for the high plastic group. The increase in heart rate in the low plastic group was less pronounced with increasing environmental temperatures. No significant effects were observed on hatching success or in the health condition of young chicks, except for high values of haemoglobin in both plastic groups, which might indicate dehydration.

Long-term pollution status of microplastics in sediment of a typical mariculture area

Microplastics (MPs) are pervasive in various environmental media, posing a significant global issue. However, long-term data on marine MPs pollution trends are limited. This study investigates sediment samples from six stations in Sishili Bay, Yellow Sea, collected in 2015, 2018, and 2021, an area impacted by industrial, maricultural, and tourism activities. Findings reveal an annual increase in MPs abundance, with mean concentrations of 92.60 ± 23.93 items/kg.dw in 2015, 146.18 ± 14.80 items/kg.dw in 2018, and 203.21 ± 20.31 items/kg.dw in 2021. MPs distribution is spatially uniform, showing no significant seasonal changes, attributed to the bay's semi-enclosed nature. Predominant MPs are fibers (>70 %) and transparent particles (>35 %), with most particles <1000 μm. PET and Rayon are the main polymers identified. The study emphasizes the escalating MPs pollution in the mariculture area, highlighting the urgent need for targeted pollution control and mitigation strategies.

Comparison of two pump-based systems for sampling small microplastics (>10 μM) in coastal waters

Microplastics (MPs) have emerged as an important research topic due to their ubiquity in the environment and their potentially harmful effects on aquatic biota. However, our knowledge of the abundance and characteristics of the smaller fraction of MPs (<300 μm) in marine waters remains limited. This study aims to compare two different filter pump devices: AAU-UFO (Universal Filtering Object) pump and KCD (KC Denmark's Micro Plastic Particle) pump for sampling small MPs (>10 μm). Coastal waters from six sites in the Gulf of Bothnia (Baltic Sea) were sampled with both devices. The concentration and composition of the collected MPs were analyzed by FPA-μFTIR imaging. The median concentrations were 117 MP/m3 with a median mass of 118 μg/m3 and 162 MP/m3 with a median mass of 117 μg/m3, for the UFO pump and KCD pump, respectively. The predominant MP shape was fragment, and the most abundant polymers were polyester, polyethylene, and polypropylene. MPs smaller than 300 μm represented more than 90% of the MPs in the samples. The recorded microplastic concentrations were several orders of magnitude higher than those previously reported using a Manta net in this area, highlighting the importance of analyzing MPs smaller than 300 μm. No significant differences in MP concentrations were found between samples from the two filter pumps, indicating that both devices are comparably effective systems for sampling MPs (>10 μm) in coastal waters. Overall, our findings contribute to harmonizing sampling methodologies for small MPs in aquatic systems, which is crucial for establishing effective monitoring programs and ensuring accurate risk assessments.

An assessment of the scope and effectiveness of soft measures to handle plastic pollution in the Baltic Sea Region

As a semi-closed sea, the Baltic Sea is especially vulnerable to human activities and pressures, such as tourism, industry, and increasing population size, which is also associated with increasing levels of plastic pollution. Apart from legal frameworks and technical solutions (e.g., waste management infrastructure), one of the means to address the problem is the use of soft measures, understood as non-compulsory, non-infrastructure, low-investment and low-effort measures that can be implemented in a way that is less complicated and costly than technical solutions. Based on the perceived need to further understand this matter, this paper discusses the role of soft measures in tackling plastic pollution. This paper combines a multi-methods approach consisting of a literature review on the topic, complemented by concrete examples of soft measures from different countries across the Baltic region. Drawing from the experiences gathered, it provides some suggestions aiming to maximise the impacts of soft measures and encourage their use as one of the tools that can be deployed to handle plastic pollution in the Baltic Sea Region and beyond.

Microplastic contamination in Chinese topsoil from 1980 to 2050

China's soil is experiencing significant microplastic contamination. We developed a machine-learning model to assess microplastic pollution from 1980 to 2050. Our results showed that the average abundance of microplastics in topsoil increased from 45 items per kilogram of soil in 1980 to 1156 items by 2018, primarily due to industrial growth (39 %), agricultural film usage (30 %), tire wear (17 %), and domestic waste (14 %). During the same period, microplastic levels in cropland rose from 98 to 2401 items per kilogram of soil, and exposure levels for the Chinese population increased from 808 to 3168 items per kilogram. By 2050, a reduction in the use of agricultural films is expected to decrease cropland contamination by half. However, overall levels are anticipated to remain steady due to other persistent sources, indicating a continued spread of microplastics into subterranean environments, water bodies, and human systems. This study highlights China's microplastic challenges and suggests potential global trends, emphasizing the need for increased awareness and intervention worldwide.

The threat of microplastics and microbial degradation potential; a current perspective

Microplastics in marine environments come from various sources, and over the years, their buildup in marine environments suggests an inevitable need for the safe mitigation of plastic pollution. Microplastics are one of the chief and hazardous components of marine pollution, as they are transferred through the food chain to different trophic levels, affecting living organisms. They are also a source of transfer for pathogenic organisms. Upon transfer to humans, several toxic effects can occur. This review aims to assess the accumulation of microplastics in marine environments globally, the threat posed to humans, and the biodegradation potential of bacteria and fungi for future mitigation strategies. The versatility of bacteria and fungi in the biodegradation of different types of plastics has been discussed, with a focus on the microbial majority that has been cultivated in labs from the marine environment. We also propose that the exploration of yet-to-be-cultivated microbial majority can be a way forward for employing future strategies to mitigate microplastics.

The effect of polyvinyl chloride microplastics on soil properties, greenhouse gas emission, and element cycling-related genes: Roles of soil bacterial communities and correlation analysis

Different shapes (membranes and particles) and concentrations (1 % (w/w) and 2 % (w/w)) of polyvinyl chloride (PVC) microplastics (MPs) were investigated to determine their impact on the soil environment. The incorporation of MPs can disrupt soil macroaggregates. Compared with 1 % (w/w) MPs, 2 % MPs resulted in a significant increase in soil organic carbon content. MP particles significantly increased soil CO2 emissions, and CH4 emissions were enhanced by both membrane and particle MPs at high concentrations. Microplastics can alter the abundance of Actinobacteria, Proteobacteria, Chloroflexi, Acidobacteriota, and Firmicutes at the phylum level, and Nocardioides, Rhodococcus and Bacillus at the genus level. MP particles had a more significant impact on soil bacterial communities than MP membranes. The relative abundances of genes involved in the C, N, and P cycles were detected by qPCR, and more remarkable changes were observed in MP membrane treatments. The relative abundance of Vicinamibacteraceae and Vicinamibacterales exhibited a positive correlation with most C/N/P cycle-related genes, whereas Pseudarthrobacter and Nocardioides demonstrated a negative correlation. This study highlights that the influence of MPs on soil parameters is mediated by soil microorganisms, providing insight into the effects of MPs on the soil microenvironment.

Environmental microplastics compromise reproduction of the marine invertebrate Mytilus galloprovincialis: A holistic approach

The extensive presence of microplastics (MPs) in marine ecosystems constitutes a major threat to aquatic environments. The gametes of the marine invertebrate Mytilus galloprovincialis, which is essential for coastal ecosystems, are released directly into the water, potentially exposing them to environmental microplastics (EMPs). This study examined the effects of exposing M. galloprovincialis gametes to 50 or 100 µg/L EMP for 1 h on fertilization rates, larval quality, and the molecular mechanisms underlying the induction of apoptosis and shell growth. Our findings show that increased EMP concentrations correlate with reduced fertilization success and higher rates of larval malformations, indicating negative impacts on embryonic development. Additionally, DNA degradation in larvae is related to the EMP concentration. The apoptosis-associated proteins Bax, P53, and Cas-3 are upregulated, whereas Bcl-2 and DNA-ligase are downregulated with increasing EMP concentrations. Prothymosin-ɑ (PTMA), which is crucial for cell proliferation, also decreases with increasing EMP concentrations, contributing to impaired cell proliferation and growth imbalances. Reduced HRG gene expression is correlated with decreased shell growth and larval malformations. This study underscores the detrimental impact of EMPs on bivalve gametes, which impacts fertilization success and larval quality and highlights the potential risks to species survival and marine ecosystem stability.

Omic-driven strategies to unveil microbiome potential for biodegradation of plastics: a review

Plastic waste accumulation has lately been identified as the leading and pervasive environmental concern, harming all living beings, natural habitats, and the global market. Given this issue, developing ecologically friendly solutions, such as biodegradation instead of standard disposal, is critical. To effectively address and develop better strategies, it is critical to understand the inter-relationship between microorganisms and plastic, the role of genes and enzymes involved in this process. However, the complex nature of microbial communities and the diverse mechanisms involved in plastic biodegradation have hindered the development of efficient plastic waste degradation strategies. Omics-driven approaches, encompassing genomics, transcriptomics and proteomics have revolutionized our understanding of microbial ecology and biotechnology. Therefore, this review explores the application of omics technologies in plastic degradation studies and discusses the key findings, challenges, and future prospects of omics-based approaches in identifying novel plastic-degrading microorganisms, enzymes, and metabolic pathways. The integration of omics technologies with advanced molecular technologies such as the recombinant DNA technology and synthetic biology would guide in the optimization of microbial consortia and engineering the microbial systems for enhanced plastic biodegradation under various environmental conditions.

Distinct impacts of microplastics on the carbon sequestration capacity of coastal blue carbon ecosystems: A case of seagrass beds

Seagrass beds, as an important coastal blue carbon ecosystem, are excellent at storing organic carbon and mitigating the impacts of global climate change. However, seagrass beds are under threat due to increased human activities and ubiquitous presence of microplastics (MPs) in marine environments. Bibliometric analysis shows that the distribution and accumulation of microplastics in seagrass beds has been widely documented worldwide, but their impacts on seagrass beds, particularly on carbon sequestration capacity, have not been given sufficient attention. This review aims to outline the potential impacts of MPs on the carbon sequestration capacity of seagrass ecosystems across five key aspects: (1) MPs act as sources of organic carbon, contributing to direct pollution in seagrass ecosystems; (2) Impacts of MPs on seagrasses and their epiphytic algae, affecting plant growth and net primary productivity; (3) Impacts of MPs on microorganisms, influencing production of recalcitrant dissolved organic carbon and greenhouse gas; (4) Impacts of MPs on seagrass sediments, altering the quality, structure, properties and decomposition processes of plant litters; (5) Other complex impacts on the seagrass ecosystems, depending on different behaviors of MPs. Latest progress in these fields are summarized and recommendations for future work are discussed. This review can provide valuable insights to facilitate future multidisciplinary investigations and encourage society-wide implementation of effective conservation measures to enhance the carbon sequestration capacity of seagrass beds.

Can microplastics variability drive the colonization dynamics of periphytic protozoan fauna in marine environments?

In recent years, microplastics have become a global environmental hot topic of concern. To explore the effects of different concentrations of microplastics on colonization dynamics of periphytic protozoan fauna, a 21-day study was conducted in temperature-controlled circulation systems. Periphytic protozoan communities were used as test organisms and exposed to five concentrations of MPs: 0, 1, 5, 25, and 125 mg l-1, identification and enumeration were conducted on days 3, 5, 7, 10, 14 and 21. The results showed that the colonization dynamics were driven by MPs and significantly shifted at concentrations over 5 mg l-1. However, a notable decline in maximum species richness and abundance was observed in the high concentrations of microplastic, along with significant deviations in colonization patterns from the control group (0 mg l-1). Therefore, it is suggested that the colonization dynamics of periphytic protozoa can serve as a bioindicator for assessing microplastic concentrations in marine environments.

High microplastic pollution in marine sediments associated with urbanised areas along the SW Bulgarian Black Sea coast

This study aims to provide baseline data on microplastic (MP) concentrations in beach and seabed sediments of the SW Black Sea coast, and to identify possible sources of MP pollution in the area. MP concentrations in beach sediments in urbanised coastal areas, as well as in all seabed sediments, were on average higher than in other parts of the Black Sea and most other European seas. Urban coastal areas showed the highest average MP concentrations (mean ± SD): 464.44 ± 272.50 MP·kg-1 dry sediment in beach samples, 825.93 ± 396.30 MP·kg-1 dry sediment in seabed samples, while coastal sediments in an area with no local anthropogenic activities had significantly lower average MP concentrations: 84.44 ± 147.57 MP·kg-1 in beach samples, and 550.62 ± 245.71 MP·kg-1 in seabed samples. Possible identified sources of MPs include sewage water discharges, urban waste, coastal fisheries and aquaculture, as well as accumulation of marine litter on beaches and in adjacent offshore areas, serving as sources of secondary MP pollution.

Enhancing the degradation of microplastics through combined KMnO4 oxidation and UV radiation

The pervasive issue of microplastics in aquatic environments presents a formidable challenge to traditional water treatment methodologies, including those utilizing KMnO4. This study pioneers advanced oxidation processes (AOPs) method aimed at improving the degradation of PE microplastics by employing a dual treatment strategy that combines KMnO4 oxidation with UV irradiation. Detailed analysis of the surface modifications and chemical functional groups of the treated PE microplastics revealed the establishment of Mn-O-Mn linkages on their surfaces. Weight reductions of 3.9%, 4.9%, and 7.5% were observed for the KMnO4/UVA, KMnO4/UVB, and KMnO4/UVC treatments over seven days, respectively. The emergence of carboxyl and hydroxyl groups played a crucial role in accelerating the degradation process. Notably, the combined application of UVC rays and KMnO4 resulted in the most effective degradation of PE microplastics observed in our study. The process significantly enhanced the formation of MnO2 particles from KMnO4 oxidation, with concentrations ranging from 0.036 to 0.070 mM for KMnO4/UVA, 0.066-0.097 mM for KMnO4/UVB, and 0.086-0.180 mM for KMnO4/UVC. Furthermore, the influence of varying pH levels, KMnO4 concentrations, and different water sources on the degradation efficacy was investigated. The pivotal role of free radicals and reactive manganese species in promoting the degradation of PE microplastics was identified. A comparative evaluation with treatments solely utilizing KMnO4 or UV light highlighted the enhanced effectiveness of the combined approach, demonstrating its potential as an efficient solution for reducing microplastic contamination in aquatic systems.

Microplastic pollution in coastal surface seawater of Southern Vietnam

Microplastics have recently emerged as a significant environmental concern due to their direct impacts on marine ecosystems. Vietnam, with its 3260-km coastline, faces an elevated risk of microplastic pollution due to various coastal anthropogenic activities. This study explored microplastic distribution in coastal surface seawater in the Southern Vietnam regions of Tien Giang, Can Gio, and Vung Tau. A total of 45 samples were collected in April, 2019, and the results showed that microplastics present at all sampling sites, with the abundance varying from 0.074 ± 0.109 pieces/m3 in Can Gio to 0.56 ± 0.35 pieces/m3 in Tien Giang. Estuarial sites showed higher abundances for all regions. Most microplastics were under 2.8 mm, fragmented, and primarily white or transparent. Polypropylene, polyethylene, and ethylene-vinyl acetate were the dominant polymers. This research indicates the urgency of further investigations to comprehensively understand the influence of wind patterns and other environmental factors on microplastic distribution.

Effects of biological filtration by ascidians on microplastic composition in the water column

Plastic pollution, a widespread environmental challenge, significantly impacts marine ecosystems. The degradation of plastic under environmental conditions results in the generation of microplastic (MP; <5 mm) fragments, frequently ingested by marine life, including filter-feeders such as ascidians (Chordata, Ascidiacea). These organisms are integral to benthic-pelagic coupling, transporting MP from the water column through marine food web. Here, we explored the effect of filtration and digestion by the solitary ascidian Styela plicata on the composition of MP in the water column and on the sinking rates of faecal matter, focusing on differences between two distinct plastics, polystyrene (PS) and the biodegradable polylactic acid (PLA). The ascidians efficiently removed 2-5 μm particles within 2 h of filtration. Following digestion and secretion process, PS concentrations in water increased while PLA concentration remained stable. Some particles were egested into the water column repackaged inside faecal pellets, which significantly increased the pellets' drag force and sinking velocity. Raman spectral analysis of digested MP revealed distinct spectrum alterations due to coating by organic substances. These findings highlight the role of ascidians - and other filter-feeders- in modifying the structure of MP in their environment. Research into such modifications is crucial for understanding the MP cycle and its consequences in marine environments.

Erosion of rigid plastics in turbid (sandy) water: quantitative assessment for marine environments and formation of microplastics

Mechanical degradation (erosion) of plastics in the marine environment has been reported in many literature studies but without quantitative information. This type of degradation is crucial as it accounts for most of the initial microplastic products, in marine environments (e.g., rivers and oceans). Here, we quantify the erosion of plastics by water-borne sediments under typical perpendicular water velocities and sand loads of turbid rivers and coastal oceans. Polypropylene (PP) shows the highest response to water-borne erosion, with a surface degradation rate of 5160 μm per year (4.44 mg per mm2 per year), compared with high-density polyethylene (HDPE) with a degradation rate of 1874 μm per year (1.79 mg per mm2 per year), resulting in the formation of microplastics (MPs). The rate of formation of such microplastic particles (>10 μm), as characterised by a laser direct infrared (LDIR) chemical imaging system, amounts to 669 particles per mm2 per year for PP and 187 particles per mm2 per year for HDPE, exhibiting average particle sizes of 60 μm and 23 μm in the same order. Furthermore, surface microscopy provided valuable insights into the dominant erosion mechanisms, revealing three distinct zones and the surface features reveal the brittle erosion behaviours. These results will enable a better assessment of degradation and lifetime prediction of plastics in turbid rivers and coastal oceans, allowing precise estimation of the rate of formation of MPs.

First evidence of microplastic inhalation among free-ranging small cetaceans

Plastic is a ubiquitous environmental contaminant, resulting in widespread exposure across terrestrial and marine spaces. In the environment, plastics can degrade into microparticles where exposure has been documented in a variety of fauna at all trophic levels. Human epidemiological studies have found relationships between inhaled microplastics and oxidative stress and inflammation. Previous studies of bottlenose dolphins (Tursiops truncatus) have reported prevalent exposure to plasticizing chemicals (e.g., phthalates) as well as particle loads in gastrointestinal tracts, but exposure from inhalation has not yet been studied. The objective of this study was to determine if inhalation is a viable route of microplastic exposure for free-ranging dolphins. Exhalation samples were opportunistically collected from dolphins residing in Sarasota Bay, Florida (n = 5) and Barataria Bay, Louisiana (n = 6) during catch-and-release health assessments to screen for microplastic particles. All dolphin samples contained at least one suspected microplastic particle, and polymer composition was determined for 100% of a subset (n = 17) of samples. Additional studies are warranted to better understand the extent of inhaled microplastics, as well as to explore impacts, given potential risks to lung function and health.

Microplastic ingestion induces energy loss on the copepod Tigriopus koreanus

In marine environments, exposure to microplastics threaten various organisms. A large portion of MPs may be bioavailable to copepods, and ingesting MPs has been reported to induce various adverse effects, including increased mortality, developmental retardation, and decreased reproduction. Adverse effects of MPs on these important processes of copepods may be induced by the obstructive effects of the ingested MPs on energy acquisition. However, few studies have explored the biological effects of MPs on copepods in terms of energy budgets. Therefore, we analyzed ATP (adenosine triphosphate) levels, enzyme activities, swimming distances, and excretion rates in marine copepods (Tigriopus koreanus) that have ingested polystyrene microplastics. Our results indicate that the ingestion of MPs may prevent adequate acquisition of nourishment and lead the copepods into a vicious circle in the respect to energetic burden. Our study provides biochemical evidence for a reduction in the energy budget of copepods due to MPs ingestion. Further, this study increases our understanding of the risks of microplastics, by providing advanced evidences of their effects on marine primary consumer.