Determination of the pH Dependent Redox Potential of Glucose Oxidase by Spectroelectrochemistry

Engineering Oxygen-Independent NADH Oxidase Integrated with Electrocatalytic FAD Cofactor Regeneration

An electrochemically mediated enzyme process for nicotinamide adenine dinucleotide (NADH) oxidation and biosensing has been developed in which the oxygen-dependent activities of wild-type NADH oxidase are replaced by electrochemical regeneration of the flavin adenine dinucleotide (FAD) cofactor in the active site. Consequently, the present bioelectrocatalysis does not rely on a continuous oxygen supply through bubbling air or pure oxygen in biosynthetic applications, which reduces enzyme stability. The coupled electrochemical and enzymatic catalysis is achieved through a combination of enzyme immobilization on the electrode and electrochemical oxidation of FADH2 in the active site mediated by the electron transfer mediator ferrocene carboxylic acid (FcCA). Furthermore, to minimize the effect of dissolved oxygen when the electrocatalytic process is exposed to air, we successfully designed mutations at the Leu40 and Cys42 sites of Leuconostoc mesenteroides (LmNOx) to block the oxygen passage into the active site and to eliminate the native FAD cofactor regeneration half-reaction. The engineered enzymes, whose activities are significantly reduced or inactive in solution, are electrocatalytically active toward conversion of NADH to NAD+, demonstrating successful FAD cofactor regeneration in the active site via electrochemistry. Finally, we developed two highly responsive electrochemical biosensors for NADH detection which has a superior substrate specific to standard detectors using metal electrodes, and comparable detection range and detection limit (1-3 μM).

Ruthenium complex based nanocomposite film with enhanced and selective electrochemical sensing of bifenthrin pesticide

Bifenthrin (BF), a widely used pyrethroid pesticide in farming, lacks highly sensitive and selective sensors despite its extensive application. Ruthenium complexes are very effective for selective sensing applications but suffer from structural instability at elevated conditions, electrochemical activity, and the use of costly electrolytes. This work improves their electrochemical activity and mechanical strength by incorporating silver nanowires and replacing the costly electrolyte with abundant KCl + PBS, resulting in enhanced signal performance. Herein, a ruthenium complex containing composite film was immobilized on a platinum (Pt) electrode using Langmuir Blodgett technique. The fabricated sensor has been characterized by differential pulse voltammetry (DPV) based electrochemical technique. The BF pesticide sensing parameters, including the limit of detection (LOD), linear range (LR), and sensitivity, were evaluated using SWV, DPV, and CV techniques. Among these, the DPV technique demonstrated the best performance, achieving a sensitivity of 0.648 μA cm-2 μM-1, a LR of 1-10 μM, and a LOD of 1 μM. The relative standard deviation (RSD) values using DPV are found to be 6.3% (repeatability study), 3% (reproducibility study), 8% (metal ion interference), 5% (organic species interference), and 2% (real sample study), which are much lesser than the World Health Organization (WHO) recommendation of RSD value on the pesticide (i.e. 20%). The BF sensor demonstrated a selectivity of 2× difference of peak height response compared to similar pesticides. The reported pesticide sensor will open new options for sensor research using metal complex-based LB film nanocomposite.

Coupling and regulation mechanisms of the flavin-dependent halogenase PyrH observed by infrared difference spectroscopy

Flavin-dependent halogenases are central enzymes in the production of halogenated secondary metabolites in various organisms and they constitute highly promising biocatalysts for regioselective halogenation. The mechanism of these monooxygenases includes formation of hypohalous acid from a reaction of fully reduced flavin with oxygen and halide. The hypohalous acid then diffuses via a tunnel to the substrate-binding site for halogenation of tryptophan and other substrates. Oxidized flavin needs to be reduced for regeneration of the enzyme, which can be performed in vitro by a photoreduction with blue light. Here, we employed this photoreduction to study characteristic structural changes associated with the transition from oxidized to fully reduced flavin in PyrH from Streptomyces rugosporus as a model for tryptophan-5-halogenases. The effect of the presence of bromide and chloride or the absence of any halides on the UV-vis spectrum of the enzyme demonstrated a halide-dependent structure of the flavin-binding pocket. Light-induced FTIR difference spectroscopy was applied and the signals assigned by selective isotope labeling of the protein moiety. The identified structural changes in α-helix and β-sheet elements were strongly dependent on the presence of bromide, chloride, the substrate tryptophan, and the product 5-chloro-tryptophan, respectively. We identified a clear allosteric coupling in solution at ambient conditions between cofactor-binding site and substrate-binding site that is active in both directions, despite their separation by a tunnel. We suggest that this coupling constitutes a fine-tuned mechanism for the promotion of the enzymatic reaction of flavin-dependent halogenases in dependence of halide and substrate availability.

NADH Photosynthesis System with Affordable Electron Supply and Inhibited NADH Oxidation

Photosynthesis offers a green approach for the recycling of nicotinamide cofactors primarily NADH in bio-redox reactions. Herein, we report an NADH photosynthesis system where the oxidation of biomass derivatives is designed as an electron supply module (ESM) to afford electrons and superoxide dismutase/catalase (SOD/CAT) cascade catalysis is designed as a reactive oxygen species (ROS) elimination module (REM) to inhibit NADH degradation. Glucose as the electron donor guarantees the reaction sustainability accompanied with oxidative products of gluconic acid and formic acid. Meanwhile, enzyme cascades of SOD/CAT greatly eliminate ROS, leading to a ≈2.00-fold elevation of NADH yield (61.1 % vs. 30.7 %). The initial reaction rate and turnover frequency (TOF) increased by 2.50 times and 2.54 times, respectively, compared with those systems without REM. Our study establishes a novel and efficient platform for NADH photosynthesis coupled to biomass-to-chemical conversion.

Electrochemical and biosensing properties of an FAD-dependent glucose dehydrogenase from Trichoderma virens

We investigated the bioelectrochemical properties of an FAD-dependent glucose dehydrogenase from Trichoderma virens (TvGDH) and its electrochemical behaviour when immobilized on a graphite electrode. TvGDH was recently shown to have an unusual substrate spectrum and to prefer maltose over glucose as substrate, and hence could be of interest as recognition element in a maltose sensor. In this study, we determined the redox potential of TvGDH, which is -0.268 ± 0.007 V vs. SHE, and advantageously low to be used with many redox mediators or redox polymers. The enzyme was entrapped in, and wired by an osmium redox polymer (poly(1-vinylimidazole-co-allylamine)-{[Os(2,2'-bipyridine)₂Cl]Cl}) with formal redox potential of +0.275 V vs. Ag|AgCl via poly(ethylene glycol) diglycidyl ether crosslinking onto a graphite electrode. When the TvGDH-based biosensor was tested with maltose it showed a sensitivity of 1.7 μA mM^-1cm^-2, a linear range of 0.5-15 mM, and a detection limit of 0.45 mM. Furthermore, it gave the lowest apparent Michaelis-Menten constant (K_{M app}) of 19.2 ± 1.5 mM towards maltose when compared to other sugars. The biosensor is also able to detect other saccharides including glucose, maltotriose and galactose, these however also interfere with maltose sensing.

Development of a Versatile Method to Construct Direct Electron Transfer-Type Enzyme Complexes Employing SpyCatcher/SpyTag System

The electrochemical enzyme sensors based on direct electron transfer (DET)-type oxidoreductase-based enzymes are ideal for continuous and in vivo monitoring. However, the number and types of DET-type oxidoreductases are limited. The aim of this research is the development of a versatile method to create a DET-type oxidoreductase complex based on the SpyCatcher/SpyTag technique by preparing SpyCatcher-fused heme c and SpyTag-fused non-DET-type oxidoreductases, and by the in vitro formation of DET-type oxidoreductase complexes. A heme c containing an electron transfer protein derived from Rhizobium radiobacter (CYTc) was selected to prepare SpyCatcher-fused heme c. Three non-DET-type oxidoreductases were selected as candidates for the SpyTag-fused enzyme: fungi-derived flavin adenine dinucleotide (FAD)-dependent glucose dehydrogenase (GDH), an engineered FAD-dependent d-amino acid oxidase (DAAOx), and an engineered FMN-dependent l-lactate oxidase (LOx). CYTc-SpyCatcher (CYTc-SC) and SpyTag-Enzymes (ST-GDH, ST-DAAOx, ST-LOx) were prepared as soluble molecules while maintaining their redox properties and catalytic activities, respectively. CYTc-SC/ST-Enzyme complexes were formed by mixing CYTc-SpyCatcher and SpyTag-Enzymes, and the complexes retained their original enzymatic activity. Remarkably, the heme domain served as an electron acceptor from complexed enzymes by intramolecular electron transfer; consequently, all constructed CYTc-SC/ST-Enzyme complexes showed DET ability to the electrode, demonstrating the versatility of this method.

Selective photoelectrochemical oxidation of glucose to glucaric acid by single atom Pt decorated defective TiO2

Photoelectrochemical reaction is emerging as a powerful approach for biomass conversion. However, it has been rarely explored for glucose conversion into value-added chemicals. Here we develop a photoelectrochemical approach for selective oxidation of glucose to high value-added glucaric acid by using single-atom Pt anchored on defective TiO₂ nanorod arrays as photoanode. The defective structure induced by the oxygen vacancies can modulate the charge carrier dynamics and band structure, simultaneously. With optimized oxygen vacancies, the defective TiO₂ photoanode shows greatly improved charge separation and significantly enhanced selectivity and yield of C₆ products. By decorating single-atom Pt on the defective TiO₂ photoanode, selective oxidation of glucose to glucaric acid can be achieved. In this work, defective TiO₂ with single-atom Pt achieves a photocurrent density of 1.91 mA cm^-2 for glucose oxidation at 0.6 V versus reversible hydrogen electrode, leading to an 84.3 % yield of glucaric acid under simulated sunlight irradiation.

Critical Parameters in an Enzymatic Way to Obtain the Unsweet Lactose-Free Milk Using Catalase and Glucose Oxidase Co-Encapsulated into Hydrogel with Chemical Cross-Linking

The presented work involves obtaining and characterising a two-enzymatic one-pot bioreactor, including encapsulated (co-immobilised) glucose oxidase and catalase. The enzymatic capsules were applied to produce unsweet, lactose-free milk during low-temperature catalysis. Furthermore, operational conditions, like pH and aeration, were selected in the paper, which sorts out discrepancies in literature reports. All experiments were carried out at 12 °C, corresponding to milk storage and transportation temperature. Preliminary studies (for reasons of analytical accuracy) were carried out in a buffer (pH, concentration of sugars mimicking conditions in the lactose-free milk, the initial glucose concentration 27.5 g/L) verified by processes carried out in milk in the final stage of the study. The presented results showed the need for regulating pH and the aeration of the reaction mixture in the continuous mode during the process. The procedure of co-immobilisation was performed in an alginate matrix with the cross-linking of glutaraldehyde or carbodiimide while carbodiimide showed better enzymes retention inside alginate capsules. Co-encapsulated enzymes could be used for nine cycles, preserving finally about 40% of the initial activity.

Molecular Dynamics Simulation of E412 Catalytic Residue Mutation of GOx-IPBCC

The enzyme glucose oxidase from Aspergillus niger has a homodimeric structure, consisting of two identical subunits with a molecular weight of 150,000 Daltons. In this study, we used the structure of the enzyme glucose oxidase from Aspergillus niger IPBCC.08.610 (GOx-IPBCC), this enzyme had a total activity of 92.87 U (μmol/min) and a Michaelis-Menten constant (Km) of 2.9 mM (millimolar). This study was conducted to predict the molecular dynamics of E412 (Glu412) residue catalytic mutation belonging to the GOx-IPBCC enzyme was determine the effect of changes in the catalytic residue on substrate binding (β-D-glucose). The results of molecular docking of 19 mutant structures, six E412 mutant homologous structures were selected (E412C, E412K, E412Q, E412T, E412, E412V, and E412W), which were evaluated using molecular dynamics simulation for 50 ns. The results showed a decrease in ∆G values in two mutant structures is E412C and E412T, and there is one mutant structure that increased ∆G values, namely E412W, these three mutant structures showed the best stability, bond interaction, and salt bridge profile according to molecular dynamics simulation.

Photochemical and Molecular Dynamics Studies of Halide Binding in Flavoenzyme Glucose Oxidase

Glucose oxidase (GOX), a characteristic flavoprotein oxidase with widespread industrial applications, binds fluoride (F - ) and chloride (Cl - ). We investigated binding properties of halide inhibitors of GOX through time-resolved spectral characterization of flavin-related photochemical processes and molecular dynamic simulations. Cl - and F - bind differently to the protein active site and have substantial but opposite effects on the population and decay of the flavin excited state. Cl - binds closer to the flavin, whose excited-state decays in <100 fs due to anion-π interactions. Such interactions appear absent in F - binding, which, however, significantly increases the active-site rigidity leading to more homogeneous, picosecond fluorescence decay kinetics. These findings are discussed in relation to the mechanism of halide inhibition of GOX by occupying the  accommodation site of catalytic intermediates and increasing the active-site rigidity.

Energy Harvesting by Mesoporous Reduced Graphene Oxide Enhanced the Mediator-Free Glucose-Powered Enzymatic Biofuel Cell for Biomedical Applications

Harnessing electrochemical energy in an engineered electrical circuit from biochemical substrates in the human body using biofuel cells is gaining increasing research attention in the current decade due to the wide range of biomedical possibilities it creates for electronic devices. In this report, we describe and characterize the construction of just such an enzymatic biofuel cell (EBFC). It is simple, mediator-free, and glucose-powered, employing only biocompatible materials. A novel feature is the two-dimensional mesoporous thermally reduced graphene oxide (rGO) host electrode. An additionally novelty is that we explored the potential of using biocompatible, low-cost filter paper (FP) instead of carbon paper, a conductive polymer, or gold as support for the host electrode. Using glucose (C₆H₁₂O₆) and molecular oxygen (O₂) as the power-generating fuel, the cell consists of a pair of bioelectrodes incorporating immobilized enzymes, the bioanode modified by rGO-glucose oxidase (GOx/rGO), and the biocathode modified by rGO-laccase (Lac/rGO). Scanning electron microscopy/energy-dispersive X-ray spectroscopy (SEM/EDX), transmission electron microscopy, and Raman spectroscopy techniques have been employed to investigate the surface morphology, defects, and chemical structure of rGO, GOx/rGO, and Lac/rGO. N₂ sorption, SEM/EDX, and powder X-ray diffraction revealed a high Brunauer-Emmett-Teller surface area (179 m² g^-1) mesoporous rGO structure with the high C/O ratio of 80:1 as well. Results from the Fourier transform infrared spectroscopy, UV-visible spectroscopy, and electrochemical impedance spectroscopy studies indicated that GOx remained in its native biochemical functional form upon being embedded onto the rGO matrix. Cyclic voltammetry studies showed that the presence of mesoporous rGO greatly enhanced the direct electrochemistry and electrocatalytic properties of the GOx/rGO and Lac/rGO nanocomposites. The electron transfer rate constant between GOx and rGO was estimated to be 2.14 s^-1. The fabricated EBFC (GOx/rGO/FP-Lac/rGO/FP) using a single GOx/rGO/FP bioanode and a single Lac/rGO/FP biocathode provides a maximum power density (P_max) of 4.0 nW cm^-2 with an open-circuit voltage (V_OC) of 0.04 V and remains stable for more than 15 days with a power output of ∼9.0 nW cm^-2 at a pH of 7.4 under ambient conditions.

Tubular Sediment-Water Electrolytic Fuel Cell for Dual-Phase Hexavalent Chromium Reduction

A novel tubular sediment-water electrolytic fuel cell (SWEFC) was fabricated for the reduction of Cr(VI) in a dual-phase system. The approach simulates a standing water body with Cr(VI)-contaminated overlying water (electrolyte) and bottom sediment phase with electrodes placed in both the phases, supplemented with urea as a potential electron donor. Cr(VI) reduction efficiency of 93.2 ± 1.3% from electrolyte (in 1.5 h) and 81.2 ± 1.3% from the sediment phase (in 8 h) with an initial Cr(VI) concentration of 1,000 mg/L was observed in a single-cell configuration. The effect of initial Cr(VI) concentration, variation in sediment salinity and pH, and different electron donors on the SWEFC performance were systematically investigated. SWEFC showed enhanced performance with 2.4-fold higher current (193.9 mA) at 400 mg/L Cr(VI) concentration when cow dung was used as a low-cost alternative to urea as an electron donor. Furthermore, reactor scalability studies were carried out with nine-anode and nine-cathode configuration (3 L electrolyte and 2 kg sediment), and reduction efficiencies of 98.9 ± 0.9% (in 1 h) and 97.6 ± 2.2% (in 8 h) were observed from the electrolyte and sediment phases, respectively. The proposed sediment-water electrolytic fuel cell can be an advanced and environmentally benign strategy for Cr(VI) remediation from contaminated sediment-water interfaces along with electricity generation.

Low-Denaturazing Glucose Oxidase Immobilization onto Graphite Electrodes by Incubation in Chitosan Solutions

In this work, glucose oxidase (GOx) has been immobilized onto graphite rod electrodes through an assisted-chitosan adsorption reaching an enzyme coverage of 4 nmol/cm2. The direct and irreversible single adsorption of the Flavine Adenine Dinucleotide (FAD) cofactor has been minimized by electrode incubation in a chitosan (CH) solution containing the enzyme GOx. Chitosan keeps the enzyme structure and conformation due to electrostatic interactions preventing FAD dissociation from the protein envelope. Using chitosan, both the redox cofactor FAD and the protein envelope remain in the active form as demonstrated by the electrochemistry studies and the enzymatic activity in the electrochemical oxidation of glucose up to a concentration of 20 mM. The application of the modified electrodes for energy harvesting delivered a power density of 119 µW/cm2 with a cell voltage of 0.3 V. Thus, chitosan presents a stabilizing effect for the enzyme conformation promoted by the confinement effect in the chitosan solution by electrostatic interactions. Additionally, it facilitated the electron transfer from the enzyme to the electrode due to the presence of embedded chitosan in the enzyme structure acting as an electrical wiring between the electrode and the enzyme (electron transfer rate constant 2.2 s−1). This method involves advantages compared with previously reported chitosan immobilization methods, not only due to good stability of the enzyme, but also to the simplicity of the procedure that can be carried out even for not qualified technicians which enable their easy implementation in industry.

On the reproducibility of enzyme reactions and kinetic modelling

Enzyme reactions are highly dependent on reaction conditions. To ensure reproducibility of enzyme reaction parameters, experiments need to be carefully designed and kinetic modeling meticulously executed. Furthermore, to enable quality control of enzyme reaction parameters, the experimental conditions, the modeling process as well as the raw data need to be reported comprehensively. By taking these steps, enzyme reaction parameters can be open and FAIR (findable, accessible, interoperable, re-usable) as well as repeatable, replicable and reproducible. This review discusses these requirements and provides a practical guide to designing initial rate experiments for the determination of enzyme reaction parameters and gives an open, FAIR and re-editable example of the kinetic modeling of an enzyme reaction. Both the guide and example are scripted with Python in Jupyter Notebooks and are publicly available (https://fairdomhub.org/investigations/483/snapshots/1). Finally, the prerequisites of automated data analysis and machine learning algorithms are briefly discussed to provide further motivation for the comprehensive, open and FAIR reporting of enzyme reaction parameters.

Multifunctional hybrid skin patch for wearable smart healthcare applications

Recent advances in wearable patches have included various sensors to monitor either physiological signs, such as the heart rate and respiration rate, or metabolites. Nevertheless, most of these have focused only on a single physiological measurement at a time, which significantly inhibits the calibration of various biological signals and diagnostic facilities. In this study, a novel multifunctional hybrid skin patch was developed for the electrochemical analysis of sweat glucose levels and simultaneous monitoring of electrocardiograms (ECGs). Furthermore, pH and temperature sensors were co-integrated onto the same patch for the calibration of the glucose biosensor to prevent inevitable inhibition and weakening of enzyme activity due to changes in the sweat pH and temperature levels. The fabricated electrochemical glucose biosensor exhibited excellent linearity (R² = 0.9986) and sensitivity (29.10 μA mM^-1 cm^-2), covering the normal range of human sweat. The potentiometric pH sensor displayed a good response with an excellent sensitivity of -77.81 mV/pH and high linearity (R² = 0.991), indicating that it can distinguish variations in the typical pH range for human sweat. Furthermore, the P, QRS complex, and T peaks in the measured ECG waveforms could be clearly distinguished, indicating the reliability of the fabricated flexible dry electrodes for continuous monitoring. The fabricated skin patch overcomes the inconvenience of the mandatory attachment of multiple patches on the human body by fully integrating all the electrochemical and electrophysiological sensors on a single patch, thus facilitating advanced glycemic control and continuous ECG monitoring for smart management of chronic diseases and healthcare applications.

Robust O2 Supplementation from a Trimetallic Nanozyme-Based Self-Sufficient Complementary System Synergistically Enhances the Starvation/Photothermal Therapy against Hypoxic Tumors

Much effort has been focused on novel nanomedicine for cancer therapy. However, tumor hypoxia limits the efficacy of various cancer therapeutics. Herein, we constructed a self-sufficient hybrid enzyme-based silk fibroin hydrogel system, consisting of Pt-decorated hollow Ag-Au trimetallic nanocages (HGN@Pt) and glucose oxidase (GOx), to supply O₂ continuously and consume glucose concurrently and, thereby, synergistically enhance the anti-cancer efficacy of a combined starvation and photothermal therapy operating in a hypoxic tumor microenvironment. Thanks to the cooperative effects of the active surface atoms (resulting from the island-like features of the Pt coating), the intrinsically hollow structure, and the strain effect induced by the trimetallic composition, HGN@Pt displayed efficient catalase-like activity. The enhancement in the generation of O₂ through the decomposition of H₂O₂ mediated by the as-designed nanozyme was greater than 400% when compared with that of hollow Ag-Pt bimetallic nanospheres or tiny Pt nanoparticles. Moreover, in the presence of HGN@Pt, significant amounts of O₂ could be generated within a few minutes, even in an acidic buffer solution (pH 5.8-6.5) containing a low concentration of H₂O₂ (100-500 μM). Because HGN@Pt exhibited a strong surface plasmon resonance peak in the near-infrared wavelength range, it could be used as a photothermal agent for hyperthermia therapy. Furthermore, GOx was released gradually from the SF hydrogel into the tumor microenvironment to mediate the depletion of glucose, leading to glucose starvation-induced cancer cell death. Finally, the O₂ supplied by HGN@Pt overcame the hypoxia of the microenvironment and, thereby, promoted the starvation therapeutic effect of the GOx-mediated glucose consumption. Meanwhile, the GOx-produced H₂O₂ from the oxidation of glucose could be used to regenerate O₂ and, thereby, construct a complementary circulatory system. Accordingly, this study presents a self-sufficient hybrid enzyme-based system that synergistically alleviates tumor hypoxia and induces an anti-cancer effect when combined with irradiation of light from a near-infrared laser.

Electrochemical Response of Glucose Oxidase Adsorbed on Laser-Induced Graphene

Carbon-based electrodes have demonstrated great promise as electrochemical transducers in the development of biosensors. More recently, laser-induced graphene (LIG), a graphene derivative, appears as a great candidate due to its superior electron transfer characteristics, high surface area and simplicity in its synthesis. The continuous interest in the development of cost-effective, more stable and reliable biosensors for glucose detection make them the most studied and explored within the academic and industry community. In this work, the electrochemistry of glucose oxidase (GOx) adsorbed on LIG electrodes is studied in detail. In addition to the well-known electroactivity of free flavin adenine dinucleotide (FAD), the cofactor of GOx, at the expected half-wave potential of -0.490 V vs. Ag/AgCl (1 M KCl), a new well-defined redox pair at 0.155 V is observed and shown to be related to LIG/GOx interaction. A systematic study was undertaken in order to understand the origin of this activity, including scan rate and pH dependence, along with glucose detection tests. Two protons and two electrons are involved in this reaction, which is shown to be sensitive to the concentration of glucose, restraining its origin to the electron transfer from FAD in the active site of GOx to the electrode via direct or mediated by quinone derivatives acting as mediators.

E. coli Nickel-Iron Hydrogenase 1 Catalyses Non-native Reduction of Flavins: Demonstration for Alkene Hydrogenation by Old Yellow Enzyme Ene-reductases*

A new activity for the [NiFe] uptake hydrogenase 1 of Escherichia coli (Hyd1) is presented. Direct reduction of biological flavin cofactors FMN and FAD is achieved using H2 as a simple, completely atom-economical reductant. The robust nature of Hyd1 is exploited for flavin reduction across a broad range of temperatures (25-70 °C) and extended reaction times. The utility of this system as a simple, easy to implement FMNH2 or FADH2 regenerating system is then demonstrated by supplying reduced flavin to Old Yellow Enzyme "ene-reductases" to support asymmetric alkene reductions with up to 100 % conversion. Hyd1 turnover frequencies up to 20.4 min-1 and total turnover numbers up to 20 200 were recorded during flavin recycling.

E. coli Nickel-Iron Hydrogenase 1 Catalyses Non-native Reduction of Flavins: Demonstration for Alkene Hydrogenation by Old Yellow Enzyme Ene-reductases

A new activity for the [NiFe] uptake hydrogenase 1 of Escherichia coli (Hyd1) is presented. Direct reduction of biological flavin cofactors FMN and FAD is achieved using H2 as a simple, completely atom-economical reductant. The robust nature of Hyd1 is exploited for flavin reduction across a broad range of temperatures (25-70 °C) and extended reaction times. The utility of this system as a simple, easy to implement FMNH2 or FADH2 regenerating system is then demonstrated by supplying reduced flavin to Old Yellow Enzyme "ene-reductases" to support asymmetric alkene reductions with up to 100 % conversion. Hyd1 turnover frequencies up to 20.4 min-1 and total turnover numbers up to 20 200 were recorded during flavin recycling.

Monitoring the mechanism of anti-cancer agents to inhibit colorectal cancer cell proliferation: Enzymatic biosensing of glucose combined with molecular docking

Glucose, a major energy source in cellular metabolism, has a significant role in cell growth. The increase in glucose uptake is a distinguishing hallmark in cancer cells. A key step in glucose utilization is the transport of glucose to the cancer cells for supplying their additional energy. The glucose transporter (or GLUT) family is a membrane protein which facilitates the uptake of glucose in most cancer cell types. Given the increased glucose level in cancer cells and the regulatory role of GLUTs in glucose uptake, it is required to combine both experimental and theoretical studies to develop new methods to monitor cell proliferation. Herein, for the first time, a new strategy was proposed to evaluate the cell proliferation of HT-29 based on glucose consumption in the presence of resveratrol (RSV) as an anticancer agent. A hybrid nanocomposite of carbon nanofibers and nitrogen-doped graphene quantum dots was used to design an enzymatic sensor for the selective and sensitive determination of glucose in cancer cells. The results obtained from the voltammetric technique were compared with the conventional colorimetric assay. A good correlation was observed between the proliferation rate and glucose utilization by cancer cells. As it was observed, RSV induces a decrease in glucose consumption, indicating lower glucose uptake efficiency for HT-29 cells. Molecular docking studies reveal that RSV can block the interaction of glucose with the GLUT family. This is one of the possible mechanisms for the decrease of glucose level followed by the reduction of cell proliferation in the presence of RSV. Compared with traditional methods, in vitro electrochemical techniques benefit from simple, nontoxic, sensitive and low-cost detection assays and hence serve as a novel tool to pursue the growth inhibition of cancer cell in response to anti-cancer agents.

Redox Titration of Flavoproteins: An Overview

Redox titration of flavoproteins allows to detect and analyze (1) the determinants of the stabilization of individual redox forms of the flavin by the protein; (2) the binding of the redox-active cofactor to the protein; (3) the effects of other components of the systems (such as micro- or macromolecular interactors) on parameters 1 and 2; (4) the pattern of electron flow to and from the flavin cofactor to other redox-active chemical species, including those present in the protein itself or in its physiological partners. This overview presents and discusses the fundamentals of the methodological approaches most commonly used for these purposes, and illustrates how data may be obtained in a reliable way, and how they can be read and interpreted.

Oxidases, carbon nanotubes, and direct electron transfer: A cautionary tale

The case study of four FAD-dependent oxidase enzymes is presented in the context of the often-claimed direct electron transfer (DET) to glucose oxidase at carbon nanotubes (CNT). The selected enzymes included d-amino acid (AAOx), alcohol (AOx), pyranose (PyOx), and choline oxidase (ChOx). Each enzyme (E) was mixed with chitosan and CNT (either multi- or single-walled) to form a CNT/E film on the surface of glassy carbon electrode. All eight CNT/E films displayed redox activity depicted by voltammetric current peaks near -0.4 V. However, no DET was observed for any of the films as indicated by the absence of expected substrate- and oxygen-induced asymmetry in the anodic-to-cathodic charge ratio. The peaks are suggested to be due to the redox of either a dissociated FAD cofactor, in the case of AAOx and AOx, or denatured enzyme in the case of PyOx and ChOx. The amperometric assays of the films revealed the lowering of enzymatic activity of all four oxidases by CNT. The results are consistent with the hypothesis of oxidase molecules displaying a spectrum of enzymatic activity in CNT/E films ranging from voltammetrically untraceable (for molecules adsorbed on CNT) to amperometrically measurable (for molecules remote from CNT). The kinetic studies showed that enzyme molecules with no net charge leached at the slowest rate from CNT/E films. This work adds to a growing number of reports challenging the fallacy of DET to FAD-dependent native oxidases.

Engineered Glucose Oxidase Capable of Quasi-Direct Electron Transfer after a Quick-and-Easy Modification with a Mediator

Glucose oxidase (GOx) has been widely utilized for monitoring glycemic levels due to its availability, high activity, and specificity toward glucose. Among the three generations of electrochemical glucose sensor principles, direct electron transfer (DET)-based third-generation sensors are considered the ideal principle since the measurements can be carried out in the absence of a free redox mediator in the solution without the impact of oxygen and at a low enough potential for amperometric measurement to avoid the effect of electrochemically active interferences. However, natural GOx is not capable of DET. Therefore, a simple and rapid strategy to create DET-capable GOx is desired. In this study, we designed engineered GOx, which was made readily available for single-step modification with a redox mediator (phenazine ethosulfate, PES) on its surface via a lysine residue rationally introduced into the enzyme. Thus, PES-modified engineered GOx showed a quasi-DET response upon the addition of glucose. This strategy and the obtained results will contribute to the further development of quasi-DET GOx-based glucose monitoring dedicated to precise and accurate glycemic control for diabetic patient care.

Efficient electrochemical production of glucaric acid and H2 via glucose electrolysis

Glucose electrolysis offers a prospect of value-added glucaric acid synthesis and energy-saving hydrogen production from the biomass-based platform molecules. Here we report that nanostructured NiFe oxide (NiFeO_x) and nitride (NiFeN_x) catalysts, synthesized from NiFe layered double hydroxide nanosheet arrays on three-dimensional Ni foams, demonstrate a high activity and selectivity towards anodic glucose oxidation. The electrolytic cell assembled with these two catalysts can deliver 100 mA cm⁻² at 1.39 V. A faradaic efficiency of 87% and glucaric acid yield of 83% are obtained from the glucose electrolysis, which takes place via a guluronic acid pathway evidenced by in-situ infrared spectroscopy. A rigorous process model combined with a techno-economic analysis shows that the electrochemical reduction of glucose produces glucaric acid at a 54% lower cost than the current chemical approach. This work suggests that glucose electrolysis is an energy-saving and cost-effective approach for H₂ production and biomass valorization.

Renewable biomass conversion may afford high-value products from common materials, but catalysts usually require expensive metals and exhibit poor selectivities. Here, authors employ nickel-iron oxide and nitride electrocatalysts to produce H₂ and to convert glucose to glucaric acid selectively.

Pyranose oxidase: A versatile sugar oxidoreductase for bioelectrochemical applications

Pyranose oxidase (POx) is an FAD-dependent oxidoreductase, and like glucose oxidase (GOx) it is a member of the glucose-methanol-choline (GMC) superfamily of oxidoreductases. POx oxidizes several monosaccharides including D-glucose, D-galactose, and D-xylose, while concurrently oxygen is reduced to hydrogen peroxide. In addition to this oxidase activity, POx shows pronounced activity with alternative electron acceptors that include various quinones or (complexed) metal ions. Even though POx in general shows properties that are more favourable than those of GOx (e.g., a considerably higher catalytic efficiency (k_cat/K_m) for D-glucose, significantly lower Michaelis constants K_m for D-glucose, reactivity with both anomeric forms of D-glucose) it is much less frequently used for both biosensor and biofuel cell applications than GOx. POx has been applied in biosensing of D-glucose, D-galactose, and D-xylose, and in combination with α-glucosidase also maltose. An attractive application is in biosensors constructed for the measurement of 1,5-anhydro-D-glucitol, a recognised biomarker in diabetes. Bioelectrochemical applications of POx had been restricted to enzymes of fungal origin. The recent discovery and characterisation of POx from bacterial sources, which show properties that are very distinct from the fungal enzymes, might open new possibilities for further applications in bioelectrochemistry.

Characterization of pyranose oxidase variants for bioelectrocatalytic applications

Pyranose oxidase (POx) catalyzes the oxidation of d-glucose to 2-ketoglucose with concurrent reduction of oxygen to H₂O₂. POx from Trametes ochracea (ToPOx) is known to react with alternative electron acceptors including 1,4-benzoquinone (1,4-BQ), 2,6-dichlorophenol indophenol (DCPIP), and the ferrocenium ion. In this study, enzyme variants with improved electron acceptor turnover and reduced oxygen turnover were characterized as potential anode biocatalysts. Pre-steady-state kinetics of the oxidative half-reaction of ToPOx variants T166R, Q448H, L545C, and L547R with these alternative electron acceptors were evaluated using stopped-flow spectrophotometry. Higher kinetic constants were observed as compared to the wild-type ToPOx for some of the variants. Subsequently, the variants were immobilized on glassy carbon electrodes. Cyclic voltammetry measurements were performed to measure the electrochemical responses of these variants with glucose as substrate in the presence of 1,4-BQ, DCPIP, or ferrocene methanol as redox mediators. High catalytic efficiencies (I_max^app/K_M^app) compared to the wild-type POx proved the potential of these variants for future bioelectrocatalytic applications, in biosensors or biofuel cells. Among the variants, L545C showed the most desirable properties as determined kinetically and electrochemically.

•

Pyranose oxidase (POx) shows attractive features for bioelectrocatalysis.

•

Trametes ochracea POx variant L545C is most promising for these applications.

•

Rapid kinetics experiments give good predictions for performance on an electrode.

FAD dependent glucose dehydrogenases - Discovery and engineering of representative glucose sensing enzymes

The history of the development of glucose sensors goes hand-in-hand with the history of the discovery and the engineering of glucose-sensing enzymes. Glucose oxidase (GOx) has been used for glucose sensing since the development of the first electrochemical glucose sensor. The principle utilizing oxygen as the electron acceptor is designated as the first-generation electrochemical enzyme sensors. With increasing demand for hand-held and cost-effective devices for the "self-monitoring of blood glucose (SMBG)", second-generation electrochemical sensor strips employing electron mediators have become the most popular platform. To overcome the inherent drawback of GOx, namely, the use of oxygen as the electron acceptor, various glucose dehydrogenases (GDHs) have been utilized in second-generation principle-based sensors. Among the various enzymes employed in glucose sensors, GDHs harboring FAD as the redox cofactor, FADGDHs, especially those derived from fungi, fFADGDHs, are currently the most popular enzymes in the sensor strips of second-generation SMBG sensors. In addition, the third-generation principle, employing direct electron transfer (DET), is considered the most elegant approach and is ideal for use in electrochemical enzyme sensors. However, glucose oxidoreductases capable of DET are limited. One of the most prominent GDHs capable of DET is a bacteria-derived FADGDH complex (bFADGDH). bFADGDH has three distinct subunits; the FAD harboring the catalytic subunit, the small subunit, and the electron-transfer subunit, which makes bFADGDH capable of DET. In this review, we focused on the two representative glucose sensing enzymes, fFADGDHs and bFADGDHs, by presenting their discovery, sources, and protein and enzyme properties, and the current engineering strategies to improve their potential in sensor applications.

Effect of Surface and Bulk Properties of Mesoporous Carbons on the Electrochemical Behavior of GOx-Nanocomposites

Biofuel cell (BFC) electrodes are typically manufactured by combining enzymes that act as catalysts with conductive carbon nanomaterials in a form of enzyme-nanocomposite. However, a little attention has been paid to effects of the carbon nanomaterials' structural properties on the electrochemical performances of the enzyme-nanocomposites. This work aims at studying the effects of surface and bulk properties of carbon nanomaterials with different degrees of graphitization on the electrochemical performances of glucose oxidase (GOx)-nanocomposites produced by immobilizing GOx within a network of carbon nanopaticles. Two types of carbon nanomaterials were used: graphitized mesoporous carbon (GMC) and purified mesoporous carbon (PMC). Graphitization index, surface functional groups, hydrophobic properties, and rate of aggregation were measured for as-received and acid-treated GMC and PMC samples by using Raman spectrometry, X-ray photoelectron spectroscopy (XPS), contact angle measurement, and dynamic light scattering (DLS), respectively. In addition to these physical property characterizations, the enzyme loading and electrochemical performances of the GOx-nanocomposites were studied via elemental analysis and cyclic voltammetry tests, respectively. We also fabricated BFCs using our GOx-nanocomposite materials as the enzyme anodes, and tested their performances by obtaining current-voltage (IV) plots. Our findings suggest that the electrochemical performance of GOx-nanocomposite material is determined by the combined effects of graphitization index, electrical conductivity and surface chemistry of carbon nanomaterials.

Studying direct electron transfer by site-directed immobilization of cellobiose dehydrogenase

Covalent coupling between a surface exposed cysteine residue and maleimide groups was used to immobilize variants of Myriococcum thermophilum cellobiose dehydrogenase (MtCDH) at multiwall carbon nanotube electrodes. By introducing individual cysteine residues at particular places on the surface of the flavodehydrogenase domain of the flavocytochrome we are able to immobilize the different variants in different orientations. Our results show that direct electron transfer (DET) occurs exclusively through the haem b cofactor and that the redox potential of the haem is unaffected by the orientation of the enzyme. Electron transfer between the haem and the electrode is fast in all cases and at high glucose concentrations the catalytic currents are limited by the rate of inter-domain electron transfer (IET) between the FAD and the haem. Using ferrocene carboxylic acid as a mediator we find that the total amount of immobilized enzyme is 4 to 5 times greater than the amount of enzyme that participates in DET. The role of IET in the overall DET catalysed oxidation was also demonstrated by the effects of changing Ca2+ concentration and by proteolytic cleavage of the cytochrome domain on the DET and MET currents.

Comparison of Direct and Mediated Electron Transfer in Electrodes with Novel Fungal Flavin Adenine Dinucleotide Glucose Dehydrogenase

Direct and mediated electron transfer (DET and MET) in enzyme electrodes with a novel flavin adenine dinucleotide-dependent glucose dehydrogenase (FAD-GDH) from fungi are compared for the first time. DET is achieved by placing a single-walled carbon nanotube (CNT) between GDH and a flat gold electrode where the CNT is close to FAD within the distance for DET. MET is induced by using a free electron transfer mediator, potassium hexacyanoferrate, and shuttles electrons from FAD to the gold electrode. Cyclic voltammetry shows that the onset potential for glucose response current in DET is smaller than in MET, and that the distinct redox current peak pairs in MET are observed whereas no peaks are found in DET. The chronoamperometry with respect to a glucose biosensor shows that (i) the response in DET is more rapid than in MET; (ii) the current at more than +0.45V in DET is larger than the current at the current-peak potential in MET; (iii) a DET electrode covers the glucose concentration range for clinical requirements and is not susceptible to interfering agents at +0.45 V; and (iv) a DET electrode with the novel fungal FAD-GDH does not affect sensing accuracy in the presence of up to 5 mM xylose, while it often shows a similar response level to glucose with other conventionally used fungus-derived FAD-GDHs. It is concluded that our DET system overcomes the disadvantage of MET.

Designer fungus FAD glucose dehydrogenase capable of direct electron transfer

Fungi-derived flavin adenine dinucleotide glucose dehydrogenases (FADGDHs) are currently the most popular and advanced enzymes for self-monitoring of blood glucose sensors; however, the achievement of direct electron transfer (DET) with FADGDHs is difficult. In this study, a designer FADGDH was constructed by fusing Aspergillus flavus derived FADGDH (AfGDH) and a Phanerochaete chrisosporium CDH (PcCDH)-derived heme b-binding cytochrome domain to develop a novel FADGDH that is capable of direct electron transfer with an electrode. A structural prediction suggested that the heme in the CDH may exist in proximity to the FAD of AfGDH if the heme b-binding cytochrome domain is fused to the AfGDH N-terminal region. Spectroscopic observations of recombinantly produced designer FADGDH confirmed the intramolecular electron transfer between FAD and the heme. A decrease in pH and the presence of a divalent cation improved the intramolecular electron transfer. An enzyme electrode with the immobilized designer FADGDH showed an increase in current immediately after the addition of glucose in a glucose concentration-dependent manner, whereas those with wild-type AfGDH did not show an increase in current. Therefore, the designer FADGDH was confirmed to be a novel GDH that possesses electrode DET ability. The difference in the surface electrostatic potentials of AfGDH and the catalytic domain of PcCDH might be why their intramolecular electron transfer ability is inferior to that of CDH. These relevant and consistent findings provide us with a novel strategic approach for the improvement of the DET properties of designer FADGDH. (241 words).

Flavin Storage and Sequestration by Mycobacterium tuberculosis Dodecin

Dodecins are small flavin binding proteins occurring in archaea and bacteria. They are remarkable for binding dimers of flavins with their functional relevant aromatic isoalloxazine rings deeply covered. Bacterial dodecins are widely spread and found in a large variety of pathogens, among them Pseudomonas aeruginosa, Streptococcus pneumonia, Ralstonia solanacearum, and Mycobacterium tuberculosis ( M. tuberculosis). In this work, we seek to understand the function of dodecins from M. tuberculosis dodecin. We describe flavin binding in thermodynamic and kinetic properties and achieve mechanistic insight in dodecin function by applying spectroscopic and electrochemical methods. Intriguingly, we reveal a significant pH dependence in the affinity and specificity of flavin binding. Our data give insight in M. tuberculosis dodecin function and advance the current understanding of dodecins as flavin storage and sequestering proteins. We suggest that the dodecin in M. tuberculosis may specifically be important for flavin homeostasis during the elaborate lifestyle of this organism, which calls for the evaluation of this protein as drug target.

Recent advances in spectroelectrochemistry

The integration of two quite different techniques, conventional electrochemistry and spectroscopy, into spectroelectrochemistry (SEC) provides a complete description of chemically driven electron transfer processes and redox events for different kinds of molecules and nanoparticles. SEC possesses interdisciplinary advantages and can further expand the scopes in the fields of analysis and other applications, emphasizing the hot issues of analytical chemistry, materials science, biophysics, chemical biology, and so on. Considering the past and future development of SEC, a review on the recent progress of SEC is presented and selected examples involving surface-enhanced Raman scattering (SERS), ultraviolet-visible (UV-Vis), near-infrared (NIR), Fourier transform infrared (FTIR), fluorescence, as well as other SEC are summarized to fully demonstrate these techniques. In addition, the optically transparent electrodes and SEC cell design, and the typical applications of SEC in mechanism study, electrochromic device fabrication, sensing and protein study are fully introduced. Finally, the key issues, future perspectives and trends in the development of SEC are also discussed.

Mediatorless, Reversible Optical Nanosensor Enabled through Enzymatic Pocket Doping

Single-walled carbon nanotubes (SWCNTs) exhibit intrinsic near-infrared fluorescence that benefits from indefinite photostability and tissue transparency, offering a promising basis for in vivo biosensing. Existing SWCNT optical sensors that rely on charge transfer for signal transduction often require exogenous mediators that compromise the stability and biocompatibility of the sensors. This study presents a reversible, mediatorless, near-infrared glucose sensor based on glucose oxidase-wrapped SWCNTs (GOx-SWCNTs). GOx-SWCNTs undergo a selective fluorescence increase in the presence of aldohexoses, with the strongest response toward glucose. When incorporated into a custom-built membrane device, the sensor demonstrates a monotonic increase in initial response rates with increasing glucose concentrations between 3 × 10^-3 and 30 × 10^-3 m and an apparent Michaelis-Menten constant of K_M (app) ≈ 13.9 × 10^-3 m. A combination of fluorescence, absorption, and Raman spectroscopy measurements suggests a fluorescence enhancement mechanism based on localized enzymatic doping of SWCNT defect sites that does not rely on added mediators. Removal of glucose reverses the doping effects, resulting in full recovery of the fluorescence intensity. The cyclic addition and removal of glucose is shown to successively enhance and recover fluorescence, demonstrating reversibility that serves as a prerequisite for continuous glucose monitoring.

Cobalt Phosphide Double-Shelled Nanocages: Broadband Light-Harvesting Nanostructures for Efficient Photothermal Therapy and Self-Powered Photoelectrochemical Biosensing

Ultra-broadband light-absorbing materials are highly desired for effective solar-energy harvesting. Herein, novel cobalt phosphide double-shelled nanocages (CoP-NCs) are synthesized. Uniquely, these CoP-NCs are able to nonselectively absorb light spanning the full solar spectrum, benefiting from its electronic properties and hollow nanostructure. They promise a wide range of applications involving solar energy utilization. As proof-of-concept demonstrations, CoP-NCs are employed here as effective photothermal agents to ablate cancer cells by utilizing their ability of near-infrared heat conversion, and as photoactive material for self-powered photoelectrochemical sensing by taking advantage of their ability of photon-to-electricity conversion.