Recent Advances in the Catalytic Oxidation of Volatile Organic Compounds: A Review Based on Pollutant Sorts and Sources

Selective activation of dioxygen to singlet oxygen over La-Si co-doped TiO2 microspheres for photocatalytic degradation of formaldehyde

Volatile Organic Compounds (VOCs) are highly harmful to human beings and other organisms, and thus the elimination of VOCs is extremely urgent. Here, La-Si co-doped TiO2 microsphere photocatalysts, which were prepared by a hydrothermal method, exhibited high photocatalytic activity in the decomposition of formaldehyde compared with TiO2. The improved activity can be attributed to the promoted separation efficiency and density of the charge carriers, as verified by the electrochemical results in combination with density functional theory calculations. In addition, the Si dopant changed the microstructure and surface acidity, while the addition of La promoted the separation efficiency of charge carriers. More interestingly, it was found that singlet oxygen was the key species in the activation of molecular dioxygen, and it played a pivotal role in the photocatalytic decomposition of formaldehyde. This work provides a novel strategy for the selective activation of dioxygen for use in the decomposition of formaldehyde.

Characterization and source apportionment of volatile organic compounds in Hong Kong: A 5-year study for three different archetypical sites

Initial success has been achieved in Hong Kong in controlling primary air pollutants, but ambient ozone levels kept increasing during the past three decades. Volatile organic compounds (VOCs) are important for mitigating ozone pollution as its major precursors. This study analyzed VOC characteristics of roadside, suburban, and rural sites in Hong Kong to investigate their compositions, concentrations, and source contributions. Here we show that the TVOC concentrations were 23.05 ± 13.24, 12.68 ± 15.36, and 5.16 ± 5.48 ppbv for roadside, suburban, and rural sites between May 2015 to June 2019, respectively. By using Positive Matrix Factorization (PMF) model, six sources were identified at the roadside site over five years: Liquefied petroleum gas (LPG) usage (33%-46%), gasoline evaporation (8%-31%), aged air mass (11%-28%), gasoline exhaust (5%-16%), diesel exhaust (2%-16%) and fuel filling (75-9%). Similarly, six sources were distinguished at the suburban site, including LPG usage (30%-33%), solvent usage (20%-26%), diesel exhaust (14%-26%), gasoline evaporation (8%-16%), aged air mass (4%-11%), and biogenic emissions (2%-5%). At the rural site, four sources were identified, including aged air mass (33%-51%), solvent usage (25%-30%), vehicular emissions (11%-28%), and biogenic emissions (6%-12%). The analysis further revealed that fuel filling and LPG usage were the primary contributors to OFP and OH reactivity at the roadside site, while solvent usage and biogenic emissions accounted for almost half of OFP and OH reactivity at the suburban and rural sites, respectively. These findings highlight the importance of identifying and characterizing VOC sources at different sites to help policymakers develop targeted measures for pollution mitigation in specific areas.

Characteristics of catalytic destruction of dichloromethane and ethyl acetate mixture over HxPO4-RuOx/CeO2 catalyst

Catalytic destruction is an ascendant technology for the abatement of volatile organic compounds (VOCs) originating from solvent-based industrial processes. The varied composition tends to influence each VOC's catalytic behavior in the reaction mixture. We investigated the catalytic destruction of multi-component VOCs including dichloromethane (DCM) and ethyl acetate (EA), as representatives from pharmaceutical waste gases, over co-supported HxPO4-RuOx/CeO2 catalyst. A mutual inhibitory effect relating to concentrations because of competitive adsorption was verified in the binary VOCs oxidation and EA posed a more negative effect on DCM oxidation owing to EA's superior adsorption capacity. Preferential adsorption of EA on acidic sites (HxPO4/CeO2) promoted DCM activation on basic sites (O2-) and the dominating EA oxidation blocked DCM's access to oxidation centers (RuOx/CeO2), resulting in boosted monochloromethane yield and increased chlorine deposition for DCM oxidation. The impaired redox ability of Ru species owing to chlorine deposition in turn jeopardized deep oxidation of EA and its by-products, leading to increased gaseous by-products such as acetic acid originating from EA pyrolysis. Notably, DCM at low concentration slightly promoted EA conversion at low temperatures with or without water, consistent with the enhanced EA adsorption in co-adsorption analyses. This was mainly due to that DCM impeded the shielding effect of hydrolysate deposition from rapid EA hydrolysis depending on the decreased acidity. Moreover, water benefited EA hydrolysis but decreased CO2 selectivity while the generated water derived from EA was likely to affect DCM transformation. This work may provide theoretical guidance for the promotion of applied catalysts toward industrial applications.

Effects of surface fluoride modification on TiO2 for the photocatalytic oxidation of toluene

In the present study, we investigated the influence of surface fluorine (F) on TiO2 for the photocatalytic oxidation (PCO) of toluene. TiO2 modified with different F content was prepared and tested. It was found that with the increasing of F content, the toluene conversion rate first increased and then decreased. However, CO2 mineralization efficiency showed the opposite trend. Based on the characterizations, we revealed that F substitutes the surface hydroxyl of TiO2 to form the structure of Ti-F. The presence of the appropriate amount of surface Ti-F on TiO2 greatly enhanced the separation of photogenerated carriers, which facilitated the generation of ·OH and promoted the activity for the PCO of toluene. It was further revealed that the increase of only ·OH promoted the conversion of toluene to ring-containing intermediates, causing the accumulation of intermediates and then conversely inhibited the ·OH generation, which led to the decrease of the CO2 mineralization efficiency. The above results could provide guidance for the rational design of photocatalysts for toluene oxidation.

Oxygen vacancy-mediated Mn2O3 catalyst with high efficiency and stability for toluene oxidation

Oxygen vacancy engineering in transition metal oxides is an effective strategy for improving catalytic performance. Herein, defect-enriched Mn2O3 catalysts were constructed by controlling the calcination temperature. The high content of oxygen vacancies and accompanying Mn4+ ions were generated in Mn2O3 catalysts calcined at low temperature, which could greatly improve the low-temperature reducibility and migration of surface oxygen species. DFT theoretical calculations further confirmed that molecular oxygen and toluene were easily adsorbed over defective α-Mn2O3 (222) facets with an energy of -0.29 and -0.48 eV, respectively, and corresponding OO bond length is stretched to 1.43 Å, resulting in the highly reactive oxygen species. Mn2O3-300 catalyst with abundant oxygen vacancies exhibited the highest specific reaction rate and lowest activation energy. Furthermore, the optimized catalyst possessed the outstanding stability, water tolerance and CO2 yield. In comparison with the fresh Mn2O3-300 catalyst, the physical structure and surface property of the used catalyst remained almost unchanged regardless of whether undergoing the stability test at consecutive catalytic runs as well as high temperature, and water resistance test. In situ DRIFTS spectra further elucidated that introducing the water vapor had little effect on the reaction intermediates, indicating the excellent durability of the defect-enriched catalyst.

Synthesis and Optimization of Foam Copper-Based CoMnOx@Co3O4/CF Catalyst: Achieving Efficient Catalytic Oxidation of Paraxylene

This study successfully developed a foam copper (CF)-based CoMnOx@Co3O4/CF composite catalyst, achieving efficient thermal catalytic oxidation of paraxylene through multifactor optimization of synthesis conditions. At a Co:Mn molar ratio of 2:1 and a calcination temperature of 450 °C, the catalyst exhibited outstanding catalytic performance, with a T90 temperature as low as 246 °C, significantly lower than that of catalysts synthesized under other conditions. Additionally, BET, XPS, Raman, EPR, and H2-TPR test results indicate that the catalyst possesses a high specific surface area, abundant oxygen vacancies, a distribution of multivalent Co and Mn species, and a lower hydrogen reduction temperature, all of which contribute to the high catalytic activity of CoMnOx@Co3O4/CF. Furthermore, in situ DRIFTS confirmed that the oxidation of paraxylene on CoMnOx@Co3O4/CF follows the Mars-Van Krevelen (MvK) mechanism. The proposed reaction pathway begins with the oxidation of the methyl group on paraxylene, followed by the opening of the benzene ring and further oxidation to CO2 and H2O. The innovative structural design and excellent catalytic performance of this catalyst provide new insights and solutions for the industrial treatment of VOCs.

Ultra-efficient Ru and Nb Co-Modified CeO2 Catalysts for Catalytic Oxidation of 1,2-Dichloroethane

The oxidation of chlorinated volatile organic compounds on CeO2 is hindered by its high susceptibility to chlorine poisoning, resulting in a reduced efficiency and stability. In this study, Ru- and Nb-co-modified CeO2 catalysts were designed to achieve excellent activity, stability, and CO2 selectivity in the catalytic oxidation of 1,2-dichloroethane (EDC). The formation of Nb-O-Ce bonds was observed to enhance the surface acidic sites, thereby improving HCl selectivity and reducing the production of chlorinated byproducts. Meanwhile, it inhibits the formation of Ru-O-Ce and promotes the generation of highly dispersed RuO2 particles on the surface, enhancing the redox properties and mobility of the surface oxygen, thus increasing CO2 selectivity. In situ diffuse reflectance infrared Fourier transform spectroscopy results revealed that chlorine species preferentially attach to Nb species rather than to oxygen vacancies on the Ru/Nb/CeO2 catalyst. This allows more alkane groups to oxidize to formate on the oxygen vacancies, reducing byproduct concentration. Additionally, the oxidation of alkane groups to carboxylic acids is initiated on the Nb species, completing a comprehensive oxidation process under the synergistic effect of RuO2.

Boosted 1,2-Dichloroethane Deep Destruction over CoRu/Al2O3 Bifunctional Catalysts via Surface Oxygen and Water Molecule Synergistic Activation

Developing efficacious catalysts with superior Cl resistance and polychlorinated byproduct inhibition capability is crucial for realizing the environmentally friendly purification of chlorinated volatile organic compounds (CVOCs). Activating CVOC molecules and desorbing Cl species by modulating the metal-oxygen property is a promising strategy to fulfill these. Herein, a bifunctional CoRu/Al2O3 catalyst with synergistic Co and Ru interactions (Ru-O-Co species) was rationally fabricated, which possesses abundant surface Co2+ and Ruδ+ sites and collaboratively facilitates the activation of lattice oxygen (O2-) and molecular oxygen (O2 → O2- → O-), accelerating 1,2-dichloroethane (1,2-DCE) decomposition via the reaction route of enolic species → aldehydes → carboxylate/carbonate. Furthermore, CoRu/Al2O3 stimulates 1,2-DCE oxidation under humid conditions as H2O molecules can be easily activated to active *OH (potential oxidizing agent) over Ru species, accelerating C-Cl dissociation and Cl desorption and promoting the transformation of catecholate-type (C═O) species to easily oxidizable carboxylic acid (COOH) species, remarkably suppressing the formation of hazardous CCl4 and CHCl2CH2Cl. This study provides critical insights into the development of bifunctional catalysts to synergistically activate surface oxygen species and H2O molecules for industrial CVOC stable and efficient elimination.

Construction of hollow sphere MnOX with abundant oxygen vacancy for accelerating VOCs degradation: Investigation through operando spectroscopycombined with on-line mass spectrometry

To clarify the key role of oxygen vacancy defects on enhancing the oxidative activity of the catalysts, metal-organic frameworks (MOFs) derived MnOX catalysts with different morphologies and oxygen vacancy defects were successfully prepared using a facile in-situ self-assembly strategy with different alkali moderators. The obtained morphologies included three-dimensional (3D) triangular cone stacked MnOX hollow sphere (MnOX-H) and 3D nanoparticle stacked MnOX nanosphere (MnOX-N). Compared to MnOX-N, MnOX-H exhibited higher activity for the oxidation of toluene (T90 = 226 °C). This was mainly due to the large number of oxygen vacancy defects and Mn4+ species in the MnOX-H catalyst. In addition, the hollow structure of MnOX-H not only facilitated toluene adsorption and activation of toluene and also provided more active sites for toluene oxidation. Reaction mechanism studies showed that the conversion of toluene to benzoate could be realized over MnOX-H catalyst during toluene adsorption at room temperature. In addition, abundant oxygen vacancy defects can accelerate the activated oxidation of toluene and the formation of oxidation products during toluene oxidation.

Identifying cardiovascular disease risk in the U.S. population using environmental volatile organic compounds exposure: A machine learning predictive model based on the SHAP methodology

BACKGROUND

Cardiovascular disease (CVD) remains a leading cause of mortality globally. Environmental pollutants, specifically volatile organic compounds (VOCs), have been identified as significant risk factors. This study aims to develop a machine learning (ML) model to predict CVD risk based on VOC exposure and demographic data using SHapley Additive exPlanations (SHAP) for interpretability.

METHODS

We utilized data from the National Health and Nutrition Examination Survey (NHANES) from 2011 to 2018, comprising 5098 participants. VOC exposure was assessed through 15 urinary metabolite metrics. The dataset was split into a training set (70 %) and a test set (30 %). Six ML models were developed, including Random Forest (RF), Light Gradient Boosting Machine (LightGBM), Decision Tree (DT), Extreme Gradient Boosting (XGBoost), Multi-Layer Perceptron (MLP), and Support Vector Machines (SVM). Model performance was evaluated using the Area Under the Receiver Operating Characteristic Curve (AUROC), accuracy, balanced accuracy, F1 score, J-index, kappa, Matthew's correlation coefficient (MCC), positive predictive value (PPV), negative predictive value (NPV), sensitivity (sens), specificity (spec) and SHAP was applied to interpret the best-performing model.

RESULTS

The RF model exhibited the highest predictive performance with an ROC of 0.8143. SHAP analysis identified age and ATCA as the most significant predictors, with ATCA showing a protective effect against CVD, particularly in older adults and those with hypertension. The study found a significant interaction between ATCA levels and age, indicating that the protective effect of ATCA is more pronounced in older individuals due to increased oxidative stress and inflammatory responses associated with aging. E-values analysis suggested robustness to unmeasured confounders.

CONCLUSIONS

This study is the first to utilize VOC exposure data to construct an ML model for predicting CVD risk. The findings highlight the potential of combining environmental exposure data with demographic information to enhance CVD risk prediction, supporting the development of personalized prevention and intervention strategies.

Metal-Organic Framework-Derived Ni-Doped Indium Oxide Nanorods for Parts per Billion-Level Nitrogen Dioxide Gas Sensing at High Humidity

Detecting parts per billion (ppb)-level nitrogen dioxide in high-moisture environments at room temperature without reducing sensing performance is a well-recognized significant challenge for metal oxide-based gas sensors. In this study, metal-organic framework-derived nickel-doped indium oxide (Ni-doped In2O3) mesoporous nanorods were prepared by a solvothermal method combined with the calcination process. The sensors prepared using the obtained Ni-doped In2O3 nanorods showcase an ultrahigh response, low detection limit, and excellent selectivity. Moreover, the abundant active sites triggered by nickel doping and the capillary enhancement effect caused by mesopores endow the sensor with ppb-level (20 ppb) NO2 detection capability in high-moisture environments (95% RH) at room temperature. With the increase in humidity, the carrier concentration of the sensor increases, and the nitric acid generated by nitrogen dioxide dissolved in water can be completely ionized in water and has high conductivity. Therefore, the gas response of the sensors increases with the increase in humidity. This study establishes a promising approach for the development of trace nitrogen dioxide-sensing devices that are resilient in high-humidity environments.

Biological aging mediates the association between volatile organic compounds and cardiovascular disease

BACKGROUND

Evidence for the relationship between individual and combined volatile organic compounds (VOCs) and cardiovascular disease (CVD) is limited. Besides, the mediating role of biological aging (BA) has not been studied. Therefore, this study aimed to examine the association between VOCs and CVD risk and to explore the mediating effects of BA.

METHODS

Logistic regression models were used to investigate the relationships of metabolites of volatile organic compounds (mVOCs) and BA with CVD. In addition, weighted quantile sum (WQS) regression, adaptive elastic networks, and Environmental Risk Score (AENET-ERS) were utilized to assess overall associations of mixed VOCs co-exposure with CVD. Mediation analyses were used to identify potential mediating effects of BA.

RESULTS

In the single-pollutant model, CYMA was shown to be associated with an increased risk of CVD. Additionally, we identified significantly positive associations between the WQS index and CVD (odds ratio (OR) = 1.292, 95% confidence interval (CI): 1.006, 1.660), and DHBMA had the greatest contribution for CVD (0.246). Furthermore, the AENET-ERS results showed that 8 mVOCs were significantly associated with CVD, and ERS was related to an elevated risk of CVD (OR = 1.538, 95%CI: 1.255, 1.884). Three BA indicators mediated the association of the mVOCs mixture with CVD, with mediating effect proportions of 11.32%, 34.34%, and 7.92%, respectively.

CONCLUSION

The risk of CVD was found to increase with both individual and combined exposure to VOCs. BA mediates the positive effects of VOCs on CVD, suggesting that this pathway may be one of the mechanisms of CVD.

A Critical Review of Deep Oxidation of Gaseous Volatile Organic Compounds via Aqueous Advanced Oxidation Processes

Volatile organic compounds (VOCs) are considered to be the most recalcitrant gaseous pollutants due to their high toxicity, diversity, complexity, and stability. Gas-solid catalytic oxidation methods have been intensively studied for VOC treatment while being greatly hampered by energy consumption, catalyst deactivation, and byproduct formation. Recently, aqueous advanced oxidation processes (AOPs) have attracted increasing interest for the deep oxidation of VOCs at room temperature, owing to the generation of abundant reactive oxygen species (ROS). However, current reviews mainly focus on VOC degradation performance and have not clarified the specific reaction process, degradation products, and paths of VOCs in different AOPs. This study systematically reviews recent advances in the application of aqueous AOPs for gaseous VOC removal. First, the VOC gas-liquid mass transfer and chemical oxidation processes are presented. Second, the latest research progress of VOC removal by various ROS is reviewed to study their degradation performances, pathways, and mechanisms. Finally, the current challenges and future strategies are discussed from the perspectives of synergistic oxidation of VOC mixtures, accurate oxidation, and resource utilization of target VOCs via aqueous AOPs. This perspective provides the latest information and research inspiration for the future industrial application of aqueous AOPs for VOC waste gas treatment.

Simultaneously Promoted Water Resistance and CO2 Selectivity in Methanol Oxidation Over Pd/CoOOH: Synergy of Co-OH and the Pd-Olatt-Co Interface

Catalytic purification of industrial oxygenated volatile organic compounds (OVOCs) is hindered by the presence of water vapor that attacks the active sites of conventional noble metal-based catalysts and the insufficient mineralization that leads to the generation of hazardous intermediates. Developing catalysts simultaneously with excellent water resistance and a high intermediate suppression ability is still a great challenge. Herein, we proposed a simple strategy to synthesize a Pd/CoOOH catalyst that contains abundant hydroxyl groups and lattice oxygen species, over which a negligible effect was observed on CH3OH conversion with 3 vol % water vapor, while a remarkable conversion reduction of 24% was observed over Pd/Co3O4. Moreover, the low-temperature CO2 selectivity over Pd/CoOOH is significantly enhanced in comparison with Pd/Co(OH)2. The high concentration of surface hydroxyl groups on Pd/CoOOH enhances the water resistance owing to the accelerated activation of H2O to generate Co-OH, which replaces the consumed hydroxyl and facilitates the quick dissociation of surface H2O through timely desorption. Additionally, the presence of Pd-Olatt-Co promotes electron transport from Co to Pd, leading to improved metal-support interactions and weakened metal-O bonds. This in turn enhances the catalyst's capacity to efficaciously convert intermediates. This study sheds new insights into designing multifunctional catalytic platforms for efficient industrial OVOC purification as well as other heterogeneous oxidation reactions.

Efficient Toluene Decontamination and Resource Utilization through Ni/Al2O3 Catalytic Cracking

Volatile organic compounds (VOCs), particularly aromatic hydrocarbons, pose significant environmental risks due to their toxicity and role in the formation of secondary pollutants. This study explores the potential of catalytic pyrolysis as an innovative strategy for the effective remediation and conversion of aromatic hydrocarbon pollutants. The research investigates the high-efficiency removal and resource recovery of the VOC toluene using a Ni/Al2O3 catalyst. The Ni/Al2O3 catalyst was synthesized using the impregnation method and thoroughly characterized. Various analytical techniques, including scanning electron microscopy, X-ray diffraction, and N2 adsorption-desorption isotherms, were employed to characterize the Al2O3 support, NiO/Al2O3 precursor, Ni/Al2O3 catalyst, and the resulting solid carbon. Results indicate that Ni predominantly occupies the pores of γ-Al2O3, forming nano/microparticles and creating interstitial pores through aggregation. The catalyst demonstrated high activity in the thermochemical decomposition of toluene into solid carbon materials and COx-Free hydrogen, effectively addressing toluene pollution while recovering valuable resources. Optimal conditions were identified, revealing that a moderate temperature of 700 °C is most favorable for the catalytic process. Under optimized conditions, the Ni/Al2O3 catalyst removed 1328 mg/g of toluene, generated 915 mg/g of carbon material, and produced 1234 mL/g of hydrogen. The prepared carbon material, characterized by its mesoporous structure and high specific surface area graphite nanofibers, holds potential application value in adsorption, catalysis, and energy storage. This study offers a promising approach for the purification and resource recovery of aromatic volatile organic compounds, contributing to the goals of a circular economy and green chemistry.

Tuning the metal-support interactions in titanium dioxide-supported palladium photocatalysts against toluene in air

The activity of supported noble metal (e.g., palladium (Pd)) catalysts is often governed by the combined effects of multiple factors (e.g., electronic and geometric properties of the support, surface chemistry of metal nanoparticles (NPs), and metal-support interactions). Pd/titanium dioxide (TiO2) catalyst has been developed as a highly efficient photocatalytic degradation (PCD) system against gaseous toluene based on high-temperature pretreatment (300 and 450 °C) in a mixed stream of hydrogen (H2) and (N2). The interaction of Pd NPs with TiO2 synergistically improves the PCD efficiency of toluene through the efficient adsorption and activation of toluene as well as molecular oxygen (O2) and water (H2O) for the facile generation of reactive oxygen species (ROS (e.g., superoxide anion (•O2-) and hydroxyl (•OH) radicals)). The PCD efficiency of the prepared sample against 5 ppm toluene (at 20% relative humidity (RH)) is 79.6% with the values of maximum reaction rate, quantum yield, space-time yield, and clean air delivery rate as 9.9 μmol g-1 h-1, 1.68E-03 molecules photon-1, 1.68E-02 molecules photon-1 g-1, and 4.8 L h-1, respectively. Based on this research, the PCD mechanism of gaseous toluene has been explored along with the dynamic behavior of O2 and H2O for ROS generation and their relative contribution to the PCD of toluene. As such, this research offers a perspective for designing advanced photocatalysts through surface defect engineering.

Identifying effects of volatile organic compounds exposure on kidney stone prevalence in U.S. adults: a cross-sectional analysis of NHANES 2007-2020

OBJECTIVE

Our aim was to comprehensively investigate the relationship between blood volatile organic compounds (VOCs) and kidney stone prevalence for U.S. adults.

METHODS

In this cross-sectional study, 10,052 participants from the 2007-2020 National Health and Nutrition Examination Survey (NHANES) were included. Multivariate logistic regression model was employed to investigate the association between 9 blood VOCs and kidney stones. We explored the dose-response relationship between blood VOCs and kidney stones using restricted cubic spline (RCS) analysis. Additionally, weighted quantile sum (WQS) regression model was performed to assess the overall association of 9 blood VOCs with kidney stones. Finally, subgroup analyses were conducted to identify the findings in different populations at high prevalence.

RESULTS

Logistic regression analysis and dose-response risk curves revealed that blood benzene (aOR = 1.308, 95% CI: 1.118-1.530, P = 0.001), blood ethylbenzene (aOR = 1.280, 95% CI: 1.054-1.554, P = 0.013), blood m-/p-xylene (aOR = 1.187, 95% CI: 1.008-1.398, P = 0.040), blood 2,5-dimethylfuran (aOR = 1.319, 95% CI: 1.135-1.533, P < 0.001) and blood furan (aOR = 1.698, 95% CI: 1.305-2.209, P < 0.001) were positively associated with the prevalence of kidney stones. WQS regression analysis revealed that exposure to mixed blood VOCs was positively correlated with kidney stone prevalence (OR = 1.34, 95% CI: 1.14-1.57), with furans carrying the greatest weight. Subgroup analyses suggested that kidney stones were more susceptible to the effects of blood VOCs in young and middle-aged, female, overweight and obese, non-hypertensive, and non-diabetic populations.

CONCLUSIONS

In this study, the results indicated that high VOC exposure was positively and independently associated with kidney stones in U.S. adults. This finding highlighted the need for public health strategies to reduce VOC exposure and its role in kidney stone prevention and treatment.

Diverse Effects of SO2-Induced Pt-O-SO3 on the Catalytic Oxidation of C3H6 and C3H8

The effects of sulfur dioxide (SO2) in the catalytic purification of short-chain hydrocarbons are still controversial, and the exact role of SO2 on adsorption and reaction pathways during the catalytic oxidation of different volatile organic compounds (VOCs) remains unclear. Herein, a three-dimensional ordered macroporous Ce0.8Zr0.2O2 supported Pt nanoparticle monolithic catalyst (Pt/OM CZO) was synthesized to investigate these effects. Our findings uncover the diverse effects of SO2: Upon SO2 treatment, the coupling between the S 3p and Pt 5d orbitals promotes the Pt-O-SO3 structure in situ formed on the catalyst surface. The propene (C3H6) molecule readily binds with the oxygen atom in Pt-O-SO3, resulting in the accumulation of acetone and carbon deposition, thereby hindering C3H6 oxidation. Conversely, a cleaved oxygen atom within the Pt-O-SO3 structure enhances propane (C3H8) adsorption and activates the C-H bond, facilitating C3H8 oxidation. These insights are pivotal for advancing the frontier of sulfur-tolerant catalysts, addressing both economic and environmental challenges.

Association between volatile organic compounds exposure and periodontitis: A representative cross-sectional study

AIM

Periodontitis is one of the most common oral diseases and a major cause of tooth loss in adults. Environmental pollution is closely associated with the prevalence of periodontitis. However, few studies have focused on the association between volatile organic compounds (VOCs) and periodontitis. This cross-sectional study aims to examine whether exposure to VOCs is associated with periodontitis, based on data from the National Health and Nutrition Examination Survey (NHANES, 2011-2014).

MATERIALS AND METHODS

We analysed data on blood VOC levels, periodontitis and related covariates from 2772 participants of the NHANES. The association between the blood VOCs and periodontitis was analysed using weighted logistic regression analysis, the restricted cubic spline (RCS) model and the weighted quantile sum (WQS) regression model. Interaction tests and mediation analysis were also conducted.

RESULTS

After adjusting for covariates, for each natural constant-fold increase in 1,4-dichlorobenzene, the odds of having periodontitis increased by 16% (odds ratio = 1.16; 95% confidence interval: 1.08-1.24, p < .001). WQS regression model indicated that 1,4-dichlorobenzene contributed the most to the association between VOC co-exposure and periodontitis. Mediation analysis further revealed that total bilirubin levels mediated the association between 1,4-dichlorobenzene and the prevalence of periodontitis, accounting for 4.32%. In addition, the positive association between o-xylene and periodontitis was more pronounced in the <65-year-old group.

CONCLUSIONS

This study has provided relatively little evidence to demonstrate a specific link between VOCs and periodontitis. Nonetheless, exposure to VOCs remains a non-negligible public health concern, and further research is required to investigate the association and potential mechanisms of action between VOCs and periodontitis.

Regulating the mobility of lattice oxygen on hollow cobalt-manganese sub-nanospheres for enhanced catalytic oxidation of toluene and o-xylene

Promoting lattice oxygen mobility of Co-based catalysts is crucial to making progress in catalytic oxidation technology. The addition of manganese, a transition metal with similar ionic radius to cobalt and variable valence, was supposed to enhance the mobility of lattice oxygen species of Co-based oxide. A range of hollow CoMnaOx sub-nanosphere catalysts with different Mn/Co ratios was synthesized via a template-sacrificed method, and the effects of different Mn/Co ratios on the structural properties of the catalysts and their catalytic performance for benzene series volatile organic compounds (VOCs) oxidation were investigated. Hollow CoMn2Ox sub-nanosphere exhibited good catalytic activity for oxidation of toluene (T90 = 265 °C) and o-xylene (T90 = 297 °C), as well as excellent recycling ability and water resistance. By adjusting the Mn/Co ratio, metal ions enter into the different tetrahedral or octahedral active sites. Compared with Co3O4, the desorption temperature of surface lattice oxygen on CoMn2Ox decreased by 110 °C. These results demonstrate that the addition of manganese can encourage the electron transfer on CoMnaOx, indicating that the introduction of the appropriate amount of manganese accelerates the activation of gas O2 and mobility of surface lattice oxygen species, thereby expediting the oxidation of benzene series VOCs.

Propane wet reforming over PtSn nanoparticles on γ-Al2O3 for acetone synthesis

Acetone serves as an important solvent and building block for the chemical industry, but the current industrial synthesis of acetone is generally accompanied by the energy-intensive and costly cumene process used for phenol production. Here we propose a sustainable route for acetone synthesis via propane wet reforming at a moderate temperature of 350 oC with the use of platinum-tin nanoparticles supported on γ-aluminium oxide (PtSn/γ-Al2O3) as catalyst. We achieve an acetone productivity of 858.4 μmol/g with a selectivity of 57.8% among all carbon-based products and 99.3% among all liquid products. Detailed spectroscopic and controlled experiments reveal that the acetone is formed through a tandem catalytic process involving propene and isopropanol as intermediates. We also demonstrate facile ketone synthesis via wet reforming with the use of different alkanes (e.g., n-butane, n-pentane, n-hexane, n-heptane, and n-octane) as substrates, proving the wide applicability of this strategy.

A systematic DFT study of structure and electronic properties of titanium dioxide

DFT functionals are of paramount importance for an accurate electronic and structural description of transition metal systems. In this work, a systematic analysis using some well-known and commonly used DFT functionals is performed. A comparison of the structural and energetic parameters calculated with the available experimental data is made in order to find the adequate functional for an accurate description of the TiO2 bulk and surface of both anatase and rutile structures. In the absence of experimental data on the surface energy, the theoretical predictions obtained using the high-accuracy HSE06 functional were used as a reference to compare against the surface energy values calculated with the other DFT functionals. A clear improvement in the electronic description of both anatase and rutile was observed by introducing the Hubbard U correction term to PBE, PW91, and OptPBE functionals. The OptPBE-U4 functional was found to offer a good compromise between accurately describing the structural and electronic properties of titania.

A review of non-thermal plasma -catalysis: The mutual influence and sources of synergetic effect for boosting volatile organic compounds removal

This review is aimed at researchers in air pollution control seeking to understand the latest advancements in volatile organic compound (VOC) removal. Implementing of plasma-catalysis technology for the removal of volatile organic compounds (VOCs) led to a significant boost in terms of degradation yield and mineralization rate with low by-product formation. The plasma-catalysis combination can be used in two distinct ways: (I) the catalyst is positioned downstream of the plasma discharge, known as the "post plasma catalysis configuration" (PPC), and (II) the catalyst is located in the plasma zone and exposed directly to the discharge, called "in plasma catalysis configuration" (IPC). Coupling these two technologies, especially for VOCs elimination has attracted the interest of many researchers in recent years. The term "synergy" is widely reported in their works and associated with the positive effect of the plasma catalysis combination. This review paper investigates the state of the art of newly published papers about catalysis, photocatalysis, non-thermal plasma, and their combination for VOC removal application. The focus is on understanding different synergy sources operating mutually between plasma and catalysis discussed and classified into two main parts: the effect of the plasma discharge on the catalyst and the effect of the catalyst on plasma discharge. This approach has the potential for application in air purification systems for industrial processes or indoor environments.

Exposure to volatile organic compounds and growth indicators in adolescents: Unveiling the association and potential intervention strategies

Environmental pollutant is considered to be one of the important factors affecting adolescent growth. However, the effects of volatile organic compounds (VOCs) exposure on adolescent growth have not been assessed. Data from the National Health and Nutrition Examination Survey (NHANES) 2011-2018 was used to examine the associations between VOCs exposure and adolescent growth indicators through three statistical models. The mediating effect of bone mineral density (BMD) on these associations was examined. The potential pathways and key targets were identified by the network pharmacology analysis methods. This study included 746 adolescents. Three statistical methods consistently showed a negative correlation between VOCs exposure and adolescent growth indicators. Furthermore, BMD mediated the relationship between VOCs exposure and adolescent growth indicators, with mediated proportion ranging from 4.3 % to 53.4 %. Network pharmacology analysis found a significant enrichment in IL-17 signaling pathway. Moreover, the adverse effects of VOCs exposure on adolescent growth were observed to significantly attenuate in adolescents with high serum vitamin D levels. Our results suggested that VOCs exposure was an adverse factor affecting adolescent growth, with BMD playing a significant regulatory role, and IL-17 signaling pathway was the underlying mechanism. Vitamin D supplementation may be a viable strategy to prevent VOCs exposure from affecting adolescent growth.

Generation of oxygen vacancies in CuO/TiO2 heterojunction induced by diatomite for highly efficient UV-Vis-IR driven photothermal catalytic oxidation of HCHO

Photothermal catalytic oxidation is a promising and sustainable method for the degradation of indoor formaldehyde (HCHO). However, the excessively high surface temperature of existing photothermal catalysts during catalysis hinders the effective adsorption and degradation of formaldehyde under static conditions. Catalyst loading and oxygen vacancies (OVs) modulation are commonly employed strategies to reduce the photothermal catalytic temperature and enhance the efficiency of photothermal catalytic oxidation. In this work, a p-n type CuO/TiO2 heterojunction is successfully loaded onto diatomite using a wet precipitation method. Under the irradiation of a 300W xenon lamp, the prepared composite material achieved a 100% removal rate of HCHO within 2 h, with a 98% conversion rate to CO2, surpassing the performance of both individual photocatalysts and thermocatalysts. Additionally, by adjusting conditions such as light irradiation and temperature, we have demonstrated that this material exhibits synergistic photothermal catalytic properties. Based on HRTEM, XPS, Raman, and EPR analyses, the introduction of diatomite as a catalyst support was shown to effectively increase the number of OVs. Experimental results, along with O2-TPD, photoelectrochemical characterization, and radical detection, demonstrate that the presence of OVs enhances the oxidative efficiency of both photocatalysis and thermocatalysis, as well as the UV-Vis-IR photothermal catalytic performance. The ternary composite material generates weak hydroxyl (•OH) and superoxide (•O2-) radical under high-temperature with dark conditions, indicating its catalytic oxidation activity under this condition. The increase in temperature and the expansion of the spectral range both enhance the generation of these radicals. In summary, this work demonstrates that the use of diatomite as a support increases the material's specific surface area and OVs content, thereby enhancing adsorption and photothermal catalysis. It elucidates the enhanced catalytic degradation mechanism of this mineral-based photothermal catalyst.

Synergistic augmentation and fundamental mechanistic exploration of β-Ga2O3-rGO photocatalyst for efficient CO2 reduction

We explore the novel photodecomposition capabilities of β-Ga2O3 when augmented with reduced graphene oxide (rGO). Employing real-time spectroscopy, this study unveils the sophisticated mechanisms of photodecomposition, identifying an optimal 1 wt% β-Ga2O3-rGO ratio that substantially elevates the degradation efficiency of Methylene Blue (MB). Our findings illuminate a direct relationship between the photocatalyst's composition and its performance, with the quantity of rGO synthesis notably influencing the catalyst's morphology and consequently, its photodegradation potency. The 1 wt% β-Ga2O3-rGO composition stands out in its class, showing a notable 4.7-fold increase in CO production over pristine β-Ga2O3 and achieving CO selectivity above 98%. This remarkable performance is a testament to the significant improvements rendered by our novel rGO integration technique. Such promising results highlight the potential of our custom-designed β-Ga2O3-rGO photocatalyst for critical environmental applications, representing a substantial leap forward in photocatalytic technology.

Synergistic mechanisms of carbon-based materials for VOCs photocatalytic degradation: A critical review

With the rapid expansion of human activities, there has been a significant increase in the release of volatile organic compounds (VOCs) from factories and interior decoration materials, posing a substantial risk to the surrounding ecosystem and human health. Photocatalysis technology based on semiconductors has emerged as a promising solution for mitigating atmospheric pollution and indoor air quality concerns. However, single semiconductors encounter several challenges when it comes to VOC photodegradation, including issues like the weak adsorption capacity for VOC molecules, insufficient surface-active sites, and limited light utilization. In recent decades, carbon-based materials have gained considerable interest in photodegrading VOCs owing to their strong adsorption capacity, electrical conductivity, broad light absorption range, and tunable surface characteristics. The incorporation of carbon materials can enhance the photodegradation efficiency of VOCs by facilitating the transfer of VOCs from the ambient air to the surface of the photocatalysts, increasing the number of active surface sites, expanding the light absorption region, and promoting the separation of charge carriers. This review provides a comprehensive overview of the applications of carbon materials with different dimensions in enhancing the performance of semiconductors for the photocatalytic degradation of VOCs. Based on the fundamental principles of photocatalytic VOC degradation, this review explores the factors influencing the degradation performance of catalysts and elucidates the degradation mechanisms. Moreover, it summarizes a range of synthesis approaches for carbon-based photocatalysts, discussing the multiple roles played by carbon materials in these processes. In conclusion, the review offers insights into the current state of carbon-based photocatalysts and outlines the existing challenges. It also provides a perspective on the future development of these materials, highlighting the need for continued research and innovation in this field.

Improving benzene catalytic oxidation on Ag/Co3O4 by regulating the chemical states of Co and Ag

Silver (9 wt.%) was loaded on Co3O4-nanofiber using reduction and impregnation methods, respectively. Due to the stronger electronegativity of silver, the ratios of surface Co3+/Co2+ on Ag/Co3O4 were higher than on Co3O4, which further led to more adsorbed oxygen species as a result of the charge compensation. Moreover, the introducing of silver also obviously improved the reducibility of Co3O4. Hence the Ag/Co3O4 showed better catalytic performance than Co3O4 in benzene oxidation. Compared with the Ag/Co3O4 synthesized via impregnation method, the one prepared using reduction method (named as AgCo-R) exhibited higher contents of surface Co3+ and adsorbed oxygen species, stronger reducibility, as well as more active surface lattice oxygen species. Consequently, AgCo-R showed lowest T90 value of 183°C, admirable catalytic stability, largest normalized reaction rate of 1.36 × 10-4 mol/(h·m2) (150°C), and lowest apparent activation energy (Ea) of 63.2 kJ/mol. The analyzing of in-situ DRIFTS indicated benzene molecules were successively oxidized to phenol, o-benzoquinone, small molecular intermediates, and finally to CO2 and water on the surface of AgCo-R. At last, potential reaction pathways including five detailed steps were proposed.

Progress on hydrogen sulfide removal: From catalytic oxidation to plasma-assisted treatment

Air pollution is a long-standing environmental challenge as well an important economic subject. Hydrogen sulfide is one the major pollutants in the industrial releases. This review focuses on the thermochemical treatment of hydrogen sulfide based on the most recent works to date regarding its removal. By analyzing fundamental steps in chemical reaction engineering, some useful factors are emphasized since they are often neglected in scientific studies, catalysts design and process scale-up. From processing side, the fluid flow conditions including velocity, H2S concentration, relative humidity, temperature and pressure strongly influence the kinetic behavior and so the catalytic performance of the H2S removal reactor. From material side, the catalyst properties including nature, porosity, pore types, size, sites distribution and layer structuration largely influence the removal performance via among others the accessibility to catalytic sites, pores connection and mass transfer resistance. Plasma-assisted catalytic removal of H2S combines many novelties in comparison with a classical thermo-catalytic process. From patents review, we can see that main concerns are about electrodes mounting, reactor lifetime and modular design to solve the problems in the industrial practice. We attempt to provide for scientists, engineers and industrialists a guidance on the design of catalysts and processes for H2S removal which could be applied in laboratorial studies and industrial processes as well.

Enhancing bacterial biodegradation of n-hexane by utilizing the adsorption capacity of non-degrading fungi

Biodegradation of hydrophobic volatile organic compounds (VOCs) such as n-hexane is limited by their poor accessibility. Constructing fungal-bacterial degradation alliances is an effective approach, but the role of those fungi without the capability to degrade VOCs may have been overlooked. In this study, a non-n-hexane-degrading fungus, Fusarium keratoplasticum FK, was utilized to enhance n-hexane degradation by the bacterium Mycobacterium neworleansense WCJ. It was shown that strain WCJ removed 64.84% of n-hexane (at a concentration of 648.20 mg L-1) over 3 d, and 84.04% after introducing strain FK. Microbial growth kinetic studies revealed that the growth of strain WCJ was also promoted. Through a stepwise adsorption-degradation experiment combined with qPCR technology, it was found that the strain WCJ could utilize the n-hexane pre-adsorbed by strain FK, with an increase in copy number from 108.2662 to 108.7731. Therefore, the non-degrading fungi can improved the accessibility of n-hexane by providing n-hexane adsorbed by the mycelium to the degrading bacteria. In addition, the adsorption tests and characterization of the fungal samples before and after Soxhlet extraction indicated that the adsorption of n-hexane on strain FK conformed to Lagergren's pseudo-second-order kinetics and Freundlich adsorption isotherms, and was correlated with the presence of lipids and nonpolar groups. This study emphasizes the potential role of non-degrading fungi in bioremediation and proposes a viable strategy to enhance the bacterial degradation of hydrophobic VOCs.

Towards bridging thermo/electrocatalytic CO oxidation: from nanoparticles to single atoms

Proton exchange membrane fuel cells (PEMFCs), as a feasible alternative to replace the traditional fossil fuel-based energy converter, contribute significantly to the global sustainability agenda. At the PEMFC anode, given the high exchange current density, Pt/C is deemed the catalyst-of-choice to ensure that the hydrogen oxidation reaction (HOR) occurs at a sufficiently fast pace. The high performance of Pt/C, however, can only be achieved under the premise that high purity hydrogen is used. For instance, in the presence of trace level carbon monoxide, a typical contaminant during H2 production, Pt is severely deactivated by CO surface blockage. Addressing the poisoning issue necessitates for either developing anti-poisoning electrocatalysts or using pre-purified H2 obtained via a thermo-catalysis route. In other words, the CO poisoning issue can be addressed by either thermal-catalysis from the H2 supply side or electrocatalysis at the user side, respectively. In spite of the distinction between thermo-catalysis and electro-catalysis, there are high similarities between the two routes. Essentially, a reduction in the kinetic barrier for the combination of CO to oxygen containing intermediates is required in both techniques. Therefore, bridging electrocatalysis and thermocatalysis might offer new insight into the development of cutting edge catalysts to solve the poisoning issue, which, however, stands as an underexplored frontier in catalysis science. This review provides a critical appraisal of the recent advancements in preferential CO oxidation (CO-PROX) thermocatalysts and anti-poisoning HOR electrocatalysts, aiming to bridge the gap in cognition between the two routes. First, we discuss the differences in thermal/electrocatalysis, CO oxidation mechanisms, and anti-CO poisoning strategies. Second, we comprehensively summarize the progress of supported and unsupported CO-tolerant catalysts based on the timeline of development (nanoparticles to clusters to single atoms), focusing on metal-support interactions and interface reactivity. Third, we elucidate the stability issue and theoretical understanding of CO-tolerant electrocatalysts, which are critical factors for the rational design of high-performance catalysts. Finally, we underscore the imminent challenges in bridging thermal/electrocatalytic CO oxidation, with theory, materials, and the mechanism as the three main weapons to gain a more in-depth understanding. We anticipate that this review will contribute to the cognition of both thermocatalysis and electrocatalysis.

Challenges and Perspectives of Environmental Catalysis for NO x Reduction

Environmental catalysis has attracted great interest in air and water purification. Selective catalytic reduction with ammonia (NH3-SCR) as a representative technology of environmental catalysis is of significance to the elimination of nitrogen oxides (NO x ) emitting from stationary and mobile sources. However, the evolving energy landscape in the nonelectric sector and the changing nature of fuel in motor vehicles present new challenges for NO x catalytic purification over the traditional NH3-SCR catalysts. These challenges primarily revolve around the application limitations of conventional industrial NH3-SCR catalysts, such as V2O5-WO3(MoO3)/TiO2 and chabazite (CHA) structured zeolites, in meeting both the severe requirements of high activity at ultralow temperatures and robust resistance to the wide array of poisons (SO2, HCl, phosphorus, alkali metals, and heavy metals, etc.) existing in more complex operating conditions of new application scenarios. Additionally, volatile organic compounds (VOCs) coexisting with NO x in exhaust gas has emerged as a critical factor further impeding the highly efficient reduction of NO x . Therefore, confronting the challenges inherent in current NH3-SCR technology and drawing from the established NH3-SCR reaction mechanisms, we discern that the strategic manipulation of the properties of surface acidity and redox over NH3-SCR catalysts constitutes an important pathway for increasing the catalytic efficiency at low temperatures. Concurrently, the establishment of protective sites and confined structures combined with the strategies for triggering antagonistic effects emerge as imperative items for strengthening the antipoisoning potentials of NH3-SCR catalysts. Finally, we contemplate the essential status of selective synergistic catalytic elimination technology for abating NO x and VOCs. By virtue of these discussions, we aim to offer a series of innovative guiding perspectives for the further advancement of environmental catalysis technology for the highly efficient NO x catalytic purification from nonelectric industries and motor vehicles.

Enhancing Oxygen Activation Ability by Composite Interface Construction over a 2D Co3O4-Based Monolithic Catalyst for Toluene Oxidation

Developing robust metal-based monolithic catalysts with efficient oxygen activation capacity is crucial for thermal catalytic treatment of volatile organic compound (VOC) pollution. Two-dimensional (2D) metal oxides are alternative thermal catalysts, but their traditional loading strategies on carriers still face challenges in practical applications. Herein, we propose a novel in situ molten salt-loading strategy that synchronously enables the construction of 2D Co3O4 and its growth on Fe foam for the first time to yield a unique monolithic catalyst named Co3O4/Fe-S. Compared to the Co3O4 nanocube-loaded Fe foam, Co3O4/Fe-S exhibits a significantly improved catalytic performance with a temperature reduction of 44 °C at 90% toluene conversion. Aberration-corrected scanning transmission electron microscopy and theoretical calculation suggest that Co3O4/Fe-S possesses abundant 2D Co3O4/Fe3O4 composite interfaces, which promote the construction of active sites (oxygen vacancy and Co3+) to boost oxygen activation and toluene chemisorption, thereby accelerating the transformation of reaction intermediates through Langmuir-Hinshelwood (L-H) and Mars-van Krevelen (MvK) mechanisms. Moreover, the growth mechanism reveals that 2D Co3O4/Fe3O4 composite interfaces are generated in situ in molten salt, inducing the growth of 2D Co3O4 onto the surface lattice of 2D Fe3O4. This study provides new insights into enhancing oxygen activation and opens an unprecedented avenue in preparing efficient monolithic catalysts for VOC oxidation.

Unravelling High Water Vapor-Induced Inhibitory Effects on Pt/Co3O4 Catalysts toward Benzene Oxidation

Water vapor inevitably exists in the environment, which causes adverse impacts on many crucial chemical reactions. However, high water vapor of up to 10 vol %─relevant to a broad spectrum of industrial practices-for catalytic implications has been less investigated or neglected. As such, we explored an industry-relevant, humidity-highly sensitive benzene oxidation only in the presence of 10 vol % water vapor using the well-established Pt/Co3O4 catalysts, to bring such an important yet ignored topic to the forefront. Results revealed that Pt/Co3O4 catalysts possessing higher contents of Pt nanoparticles exhibited marked tolerance to water vapor interference. Under an incomplete benzene conversion condition, the input of 10 vol % water vapor indeed impaired the catalytic performance of Pt/Co3O4 catalyst significantly, which, in fact, was caused by the unfavorable formation of carboxylate species covering the catalyst's surface engendering irrecoverable activity loss, instead of the well-accepted water competitive adsorption. While such activity loss can be restored by elevating the reaction to a higher temperature. This study helps us to understand the compromised catalytic activity caused by high humidity, urging the systematic evaluation of well-established catalyst systems in high water vapor-contained conditions and pressing the development of water-tolerant catalysts for real-life application consideration.

Catalytic Hydrolysis-Oxidation of Halogenated Methanes over Phase- and Defect-Engineered CePO4: Halogenated Byproduct-Free and Stable Elimination

Catalytic elimination of halogenated volatile organic compound (HVOC) emissions was still a huge challenge through conventional catalytic combustion technology, such as the formation of halogenated byproducts and the destruction of the catalyst structure; hence, more efficient catalysts or a new route was eagerly desired. In this work, crystal phase- and defect-engineered CePO4 was rationally designed and presented abundant acid sites, moderate redox ability, and superior thermal/chemical stability; the halogenated byproduct-free and stable elimination of HVOCs was achieved especially in the presence of H2O. Hexagonal and defective CePO4 with more structural H2O and Brønsted/Lewis acid sites was more reactive and durable compared with monoclinic CePO4. Based on the phase and defect engineering of CePO4, in situ diffuse reflectance infrared Fourier transform spectra (DRIFTS), and kinetic isotope effect experiments, a hydrolysis-oxidation pathway characterized by the direct involvement of H2O was proposed. Initiatively, an external electric field (5 mA) significantly accelerated the elimination of HVOCs and even 90% conversion of dichloromethane could be obtained at 170 °C over hexagonal CePO4. The structure-performance-dependent relationships of the engineered CePO4 contributed to the rational design of efficient catalysts for HVOC elimination, and this pioneering work on external electric field-assisted catalytic hydrolysis-oxidation established an innovative HVOC elimination route.

Robust Ru/Ce@Co Catalyst with an Optimized Support Structure for Propane Oxidation

Short carbon chain alkanes, as typical volatile organic compounds (VOCs), have molecular structural stability and low molecular polarity, leading to an enormous challenge in the catalytic oxidation of propane. Although Ru-based catalysts exhibit a surprisingly high activity for the catalytic oxidation of propane to CO2 and H2O, active RuOx species are partially oxidized and sintered during the oxidation reaction, leading to a decrease in catalytic activity and significantly inhibiting their application in industrial processes. Herein, the Ru/Ce@Co catalyst is synthesized with a specific structure, in which cerium dioxide is dispersed in a thin layer on the surface of Co3O4, and Ru nanoparticles fall preferentially on cerium oxide with high dispersity. Compared with the Ru/CeO2 and Ru/Co3O4 catalysts, the Ru/Ce@Co catalyst demonstrates excellent catalytic activity and stability for the oxidation of propane, even under severe operating conditions, such as recycling reaction, high space velocity, a certain degree of moisture, and high temperature. Benefiting from this particular structure, the Ru/Ce@Co (5:95) catalyst with more Ce3+ species leads to the Ru species being anchored more firmly on the CeO2 surface with a low-valent state and has a strong potential for adsorption and activation of propane and oxygen, which is beneficial for RuOx species with high activity and stability. This work provides a novel strategy for designing high-efficiency Ru-based catalysts for the catalytic combustion of short carbon alkanes.

Catalytic Oxidation of Toluene over Pt/CeO2 Catalysts: A Double-Edged Sword Effect of Strong Metal-Support Interaction

Strong metal-support interaction (SMSI), which has drawn widespread attention in heterogeneous catalysis, is thought to significantly affect the catalytic performance for volatile organic chemical (VOC) abatement. In the present study, strong interactions between platinum and ceria are constructed by modulating the oxygen vacancy concentration of CeO2 through a NaBH4 reduction method. For a catalyst with higher content of oxygen vacancy, more electrons would transfer from ceria to Pt, which is attributed to the stronger effect of SMSI. The obtained electron-richer Pt sites exhibit higher ability for toluene activation, contributing to better performance for toluene oxidation. On the other hand, the stronger metal-support interaction would facilitate CeOx species migrating to the Pt nanoparticle surface and forming an encapsulated structure. Smaller Pt dispersion leads to fewer sites for toluene adsorption and activation, which is to the disadvantage of the reaction. Therefore, taking the negative and positive effects together, the Pt/CeO2-0.5 catalyst has the highest catalytic performance for toluene abatement. Our study provides new insights into strong metal-support interaction on toluene oxidation and contributes to designing noble metal catalysts for VOC abatement.

Enhanced Catalytic Oxidation Reactivity over Atomically Dispersed Pt/CeO2 Catalysts by CO Activation

The elevation of the low-temperature oxidation activity for Pt/CeO2 catalysts is challenging to meet the increasingly stringent requirements for effectively eliminating carbon monoxide (CO) from automobile exhaust. Although reducing activation is a facile strategy for boosting reactivity, past research has mainly concentrated on applying H2 as the reductant, ignoring the reduction capabilities of CO itself, a prevalent component of automobile exhaust. Herein, atomically dispersed Pt/CeO2 was fabricated and activated by CO, which could lower the 90% conversion temperature (T90) by 256 °C and achieve a 20-fold higher CO consumption rate at 200 °C. The activated Pt/CeO2 catalysts showed exceptional catalytic oxidation activity and robust hydrothermal stability under the simulated working conditions for gasoline or diesel exhausts. Characterization results illustrated that the CO activation triggered the formation of a large portion of Pt0 terrace sites, acting as inherent active sites for CO oxidation. Besides, CO activation weakened the Pt-O-Ce bond strength to generate a surface oxygen vacancy (Vo). It served as the oxygen reservoir to store the dissociated oxygen and convert it into active dioxygen intermediates. Conversely, H2 activation failed to stimulate Vo, but triggered a deactivating transformation of the Pt nanocluster into inactive PtxOy in the presence of oxygen. The present work offers coherent insight into the upsurging effect of CO activation on Pt/CeO2, aiming to set up a valuable avenue in elevating the efficiency of eliminating CO, C3H6, and NH3 from automobile exhaust.

Research on Oil and Gas Adsorption Optimization Based on CFD Modeling and Process Simulation

In the process of oil extraction and refining, some of the liquid light hydrocarbon components will inevitably evaporate into the atmosphere, causing serious air pollution and safety hazards. This paper is focused on oil and gas adsorption systems to comprehensively optimize key parameters by combining computational fluid dynamics (CFD) modeling with process simulation, enabling the efficient treatment of hazardous materials. First, a CFD model of the hydrocarbon adsorption process is established to the porous media model by a user-defined function (UDF). Subsequently, the mass transfer process of oil and gas in porous media is successfully simulated to obtain the gas distribution in an industrial fixed bed adsorption tower. The adsorption tank is intensified, and the gas distribution in the tank is improved by optimizing the height-to-diameter ratio of the equipment and the design of the intake distributor. Third, the cyclic two-tank adsorption model of the pressure swing adsorption (PSA) process is established for key parameters optimization. Finally, the operating parameters and conditions of the PSA process are suspected by considering five factors affecting the adsorption efficiency: adsorption time, adsorption pressure, adsorption temperature, feed flow rate, and purge ratio of the washing step.

New Architecture Based on Metal-Organic Frameworks and Spin Crossover Complexes to Detect Volatile Organic Compounds

We present here the encapsulation of a spin crossover complex C1 [FeII(L)] (L: 4-amino-, 2-(2-pyridinylmethylene)hydrazide) inside MOF-808(Zr), a chemically robust Metal-Organic Framework. The compound C1⊂MOF-808 retains its crystallinity as well as a partial porosity compared to pristine MOF and shows solvatochromism under Volatile Organic compounds (VOCs) sorption associated to a spin state change of the guest complex. More specifically, this compound shows an interesting reversible color change under formaldehyde and formic acid vapor sorption and can therefore be considered as a new kind of optical VOCs chemosensor, opening new doors for developing a broad range of VOCs optical sensors.

Benzene Oxidation in Air by an Amine-Functionalized Metal-Organic Framework-Derived Carbon- and Nitrogen-Loaded Zirconium Dioxide-Supported Platinum Catalyst

To learn more about the behavior of amine (NH2)-functionalized metal-organic framework (MOF)-derived noble metal catalysts in the removal of aromatic volatile organic compounds in air, benzene oxidation at low temperatures has been investigated using 0.2-, 0.8-, and 1.5%-platinum (Pt)/Universitetet i Oslo (UiO)-66-NH2. The benzene conversion (XB) of x%-Pt/UiO-66-NH2-R under dry conditions (175 °C) was 23% (x = 0.2%) < 52% (x = 0.8%) < 100% (x = 1.5%): 'R' suffix denotes reduction pretreatment using a hydrogen (10 vol %) and nitrogen mixture at 300 °C for the generation of metallic Pt (Pt0) sites and simultaneous partial MOF decomposition into carbon- and nitrogen-loaded zirconium dioxide. The prominent role of reduction pretreatment was apparent in benzene oxidation as 1.5%-Pt/UiO-66-NH2 did not exhibit catalytic activity below 175 °C (dry condition). The promotional role of moisture in benzene oxidation by 1.5%-Pt/UiO-66-NH2-R was evident with a rise in the steady-state reaction rate (r) at 110 °C (21 kPa molecular oxygen (O2)) from 1.3 × 10-3 to 5.0 × 10-3 μmol g-1 s-1 as the water (H2O) partial pressure increased from 0 to 1.88 kPa. In contrast, the activity was lowered with increasing RH due to catalyst poisoning by excess moisture (r (110 °C) of 6.6 × 10-04 μmol g-1 s-1 at 2.83 kPa H2O (21 kPa O2)). Kinetic modeling suggests that XB proceeds through the Langmuir-Hinshelwood mechanism on the Pt/UiO-66-NH2-R surface (dissociative O2 chemisorption and the involvement of two oxygen species in benzene oxidation). According to the density functional theory simulation, the carbon and nitrogen impurities are to make the first XB step (i.e., hydrogen migration from the benzene molecule to the substrate) energetically favorable. The second hydrogen atom from the benzene molecule is also extracted effectively, while the oxygen derived from O2 facilitates further XB. The Pt0 sites dissociate the O2 and H2O molecules, while the product of the latter, i.e., free hydrogen and hydroxyl, makes the subsequent XB steps energetically favorable.

Synergistic Catalytic Removal of NOx and n-Butylamine via Spatially Separated Cooperative Sites

Synergistic control of nitrogen oxides (NOx) and nitrogen-containing volatile organic compounds (NVOCs) from industrial furnaces is necessary. Generally, the elimination of n-butylamine (n-B), a typical pollutant of NVOCs, requires a catalyst with sufficient redox ability. This process induces the production of nitrogen-containing byproducts (NO, NO2, N2O), leading to lower N2 selectivity of NH3 selective catalytic reduction of NOx (NH3-SCR). Here, synergistic catalytic removal of NOx and n-B via spatially separated cooperative sites was originally demonstrated. Specifically, titania nanotubes supported CuOx-CeO2 (CuCe-TiO2 NTs) catalysts with spatially separated cooperative sites were creatively developed, which showed a broader active temperature window from 180 to 340 °C, with over 90% NOx conversion, 85% n-B conversion, and 90% N2 selectivity. A synergistic effect of the Cu and Ce sites was found. The catalytic oxidation of n-B mainly occurred at the Cu sites inside the tube, which ensured the regular occurrence of the NH3-SCR reaction on the outer Ce sites under the matching temperature window. In addition, the n-B oxidation would produce abundant intermediate NH2*, which could act as an extra reductant to promote NH3-SCR. Meanwhile, NH3-SCR could simultaneously remove the possible NOx byproducts of n-B decomposition. This novel strategy of constructing cooperative sites provides a distinct pathway for promoting the synergistic removal of n-B and NOx.

Constructing Pd@Layered-CoOx/MFI Bifunctional Catalyst for Efficient Ethyl Acetate Oxidation: Boosted C═O Activation and *O Species Transformation

Oxygenated volatile organic compounds (OVOCs), emitted in large quantities by the chemical industry, are a major contributor to the formation of ozone and subsequent particulate matter. For the efficient catalytic oxidation of OVOCs, the challenges of molecular activation and intermediate inhibition remain. The construction of bifunctional active sites with specific structures offers a promising way to overcome these problems. Here, the Pd@Layered-CoOx/MFI bifunctional catalyst with core-shell active sites was rationally fabricated though a two-step ligand pyrolysis method, which exhibits a superb oxidation efficiency toward ethyl acetate (EA). Over this, 13.4% of EA (1000 ppm) can be oxidized at just 140 °C with a reaction rate of 13.85 mmol·gPd-1·s-1, around 176.7 times higher than that of the conventional Pd-CoOx/MFI catalyst. The electronic coupling of the Pd-Co pair promotes the electron back-donation from Pd nanoparticles to the layered CoOx shell and facilitates the formation of Pd2+ species, which greatly enhances the adsorption and activation of the electron-rich C═O bond of the EA molecules. In addition, the synergy of these core-shell Pd@Layered-CoOx sites accelerates the activation and transformation of *O species, which inhibit the formation of acetaldehyde and ethanol byproducts, ensuring the rapid total oxidation of EA molecules via the Mars-van Krevelen mechanism. This work established a solid foundation for exploring robust bifunctional catalysts for deep OVOC purification.

Mn and Co decorated biomorphic ceria fiber catalysts for soot and benzene total oxidation

Mn or Co supported CeO2 fiber catalysts were synthesized following a biotemplating route and evaluated in soot combustion and benzene total oxidation. The catalysts were characterized by SEM, EDX, N2 physisorption, FTIR-ATR, XRD, RAMAN and XPS. SEM results confirmed that the "twisted ribbon" morphology of the biotemplate was mostly maintained. XRD and Raman showed that Mn and Co cations partially insert into ceria lattice and also segregate at the surface of the fibers. XPS allowed to determine that both set of catalysts exhibit Ce3+ and Ce4+ species, in addition to adsorbed and lattice oxygen. Also, the average oxidation state (AOS) of surface Mn could be calculated. Compared to bare Fib Ce, the performances for both reactions were improved for the supported catalysts, except from the catalyst with lowest Mn content for soot combustion. The catalytic activity was discussed in terms of the physicochemical features of the supported catalysts.

Amidation-Reaction Strategy Constructs Versatile Mixed Matrix Composite Membranes towards Efficient Volatile Organic Compounds Adsorption and CO2 Separation

Mixed matrix composite membranes (MMCMs) have shown advantages in reducing VOCs and CO2 emissions. Suitable composite layer, substrate, and good compatibility between the filler and the matrix in the composite layer are critical issues in designing MMCMs. This work develops a high-performance UiO-66-NA@PDMS/MCE for VOCs adsorption and CO2 permea-selectivity, based on a simple and facile fabrication of composite layer using amidation-reaction approach on the substrate. The composite layer shows a continuous morphological appearance without interface voids. This outstanding compatibility interaction between UiO-66-NH2 and PDMS is confirmed by molecular simulations. The Si─O functional group and UiO-66-NH2 in the layer leads to improved VOCs adsorption via active sites, skeleton interaction, electrostatic interaction, and van der Waals force. The layer and ─CONH─ also facilitate CO2 transport. The MMCMs show strong four VOCs adsorption and high CO2 permeance of 276.5 GPU with a selectivity of 36.2. The existence of VOCs in UiO-66-NA@PDMS/MCE increases the polarity and fine-tunes the pore size of UiO-66-NH2, improving the affinity towards CO2 and thus promoting the permea-selectivity for CO2, which is further verified by GCMC and EMD methods. This work is expected to offer a facile composite layer manufacturing method for MMCMs with high VOC adsorption and CO2 permea-selectivity.

Management of methyl mercaptan contained in waste gases - an overview

Methyl mercaptan is a typical volatile organosulfur pollutant contained in many gases emitted by urban waste treatment, various industries, natural gas handling, refining processes, and energy production. This work is a comprehensive overview of the scientific and practical aspects related to the management of methyl mercaptan pollution. The main techniques, including absorption, adsorption, oxidation, and biological treatments, are examined in detail. For each method, its capability as well as the technical advantages and drawbacks have been highlighted. The emerging methods developed for the removal of methyl mercaptan from natural gas are also reviewed. These methods are based on the catalytic conversion of CH3SH to hydrocarbons and H2S.

Modulating the Microstructure and Surface Acidity of MnO2 by Doping-Induced Phase Transition for Simultaneous Removal of Toluene and NOx at Low Temperature

It is a great challenge to remove VOCs and NOx simultaneously from flue gas in nonelectric industries. This study focuses on the construction of Fe-MnO2 catalysts that perform well in the simultaneous removal of toluene and NOx at low temperatures. Utilizing the Fe-induced phase transition of MnO2, Fe-MnO2-F&R catalysts with a composite morphology of nanoflowers and nanorods were successfully prepared that provided an abundant microporous structure to facilitate the diffusion of molecules of different sizes. Through in-depth investigation of the active sites and reaction mechanism, we discovered that Fe-induced phase transition could modulate the surface acidity of Fe-MnO2-F&R. The higher concentration of surface Mn4+ provided numerous Brønsted acid sites, which effectively promoted the activation of toluene to reactive intermediates, such as benzyl alcohol/benzoate/maleic acid. Simultaneously, Fe provided a large number of Lewis acid sites that anchor and activate NH3 species, thereby inhibiting NH3 nonselective oxidation. Furthermore, additional Brønsted acid sites were generated during the simultaneous reaction process, enhancing toluene activation. Consequently, the simultaneous removal of toluene and NOx was achieved through regulation of the physical structure and the concentration of acidic sites. The present work provides new insights into the rational design of bifunctional catalysts for the synergistic control of VOCs and NOx emissions.

The exposure to volatile organic compounds associate positively with overactive bladder risk in U.S. adults: a cross-sectional study of 2007-2020 NHANES

Objective

The aim of this study was to comprehensively investigate the potential relationship between blood volatile organic compounds (VOCs) and overactive bladder (OAB) risk.

Methods

A total of 11,183 participants from the 2007-2020 National Health and Nutrition Examination Survey (NHANES) were included in this cross-sectional study. We used multivariate logistic regression models to investigate the relationship between nine blood VOCs and OAB risk. Restricted cubic spline (RCS) analysis was used to investigate the dose-response relationship between blood VOCs and OAB. In addition, the overall association of blood VOCs with OAB risk was assessed by weighted quantile sum (WQS) regression model. Finally, we conducted subgroup analyses to explore the findings in different high-risk populations.

Results

After adjusting for potential confounders, logistic regression analysis revealed that blood 2,5-dimethylfuran (aOR = 2.940, 95% CI: 1.096-7.890, P = 0.032), benzene (aOR = 1.460, 95% CI: 1.044-2.043, P = 0.027) and furan (aOR = 9.426, 95% CI: 1.421-62.500, P = 0.020) were positively independent associated with the risk of OAB. And dose-response risk curves indicated that 2,5-dimethylfuran, benzene and furan in the blood were linearly positive associated with OAB risk. WQS regression analysis showed that exposure to mixed blood VOCs increased the risk of OAB (OR = 1.29, 95% CI: 1.11-1.49), with furans having the greatest weight. In subgroup analyses, we found that OAB was more susceptible to blood VOCs in young and middle-aged, male, non-hypertensive, and alcohol-drinking populations.

Conclusions

The results of this study indicate that high exposure to VOCs is independently and positively associated with OAB risk in U.S. adults, particularly 2,5-dimethylfuran, benzene, and furan. In addition, age, gender, hypertension and alcohol consumption may influence the association. Our study provided novel epidemiologic evidence to explore the potential role of environmental pollutants in OAB.

Engineering Co3O4@3DOM LaCoO3 multistage-pore nanoreactor with superior SO2 resistance for toluene catalytic combustion

Sulfur dioxide poisoning is a significant factor in catalyst deactivation during the catalytic combustion of volatile organic compounds. In this study, we prepared the LaCoO3 and Co3O4 composite catalysts using both the Ship-in-Bottle and Building-Bottle-Around-Ship approaches. Three-dimensionally ordered macropores (3DOM LaCoO3) were utilized as nanoreactors to protect the active sites during the catalytic combustion of toluene, preventing SO2 poisoning. Additionally, we grew ZIF-67 confined in the nanoreactor to create a multistage-pore structure. The Co3O4@3DOM LaCoO3 catalysts exhibited excellent activity in the complete catalytic oxidation of toluene. Various characterization studies confirmed the presence of a significant number of Co3+ species and an abundance of surface weak acid sites in the Co3O4@3DOM LaCoO3 catalysts, which synergistically enhanced the conversion of VOCs at low temperatures. Notably, the multistage pore structure provided a favorable reaction environment, accelerating the adsorption and diffusion of toluene and intermediates, resulting in excellent sulfur resistance of the catalysts. Moreover, XPS analysis confirmed a strong interaction between Co3O4 and LaCoO3, promoting rapid electron transfer and increasing the activation of O2-. In situ DRIFTS experiments verified that toluene mainly follows the MvK mechanism over Co3O4@3DOM LaCoO3 catalysts, indicating the following reaction pathway: toluene adsorption → benzyl alcohol → benzaldehyde → benzoate → anhydride → CO2 and H2O.

Acid etching post-treatment enhanced fungal sterilization performance of copper-manganese-cerium oxide in liquid and aerosol: Materials and molecular biological mechanisms

Bioaerosol is one of the main ways to spread respiratory infectious diseases. In order to further improve the sterilization efficiency of copper-manganese-cerium oxide (CuMnCeOx), the post-treatment method based on acid etching was adopted. The results showed that sterilization efficiency of the treated CuMnCeOx could reach 99% in aerosol with space velocity of 1400 h-1. L(+)-ascorbic acid successfully promoted the formation of Cu+, oxygen vacancies and the generation of reactive oxygen species (ROS) on the surface of the treated CuMnCeOx. During sterilization in liquid system, the transcriptome identified 316 differentially expressed genes, including 270 up-regulated genes and 46 down-regulated genes. Differentially expressed genes were significantly enriched in cell wall (GO:0005618) and external encapsulating structure (GO:0030312). Up-regulated genes were shown in regulation of reactive oxygen species biosynthetic processes (GO:1903409, GO:1903426, GO:1903428) and positive regulation all of reactive oxygen species metabolic process (GO:2000379), indicating that ROS induced cell death by destroying cell wall.