Preparation and enhanced visible-light photocatalytic H2-production activity of CdS-sensitized Pt/TiO2 nanosheets with exposed (001) facets

Interface engineered cascade-type electronic structure of 2D/0D/2D CdS-CdCO3/SnO2 quantum dots/g-C3N4 nanocomposite for boosting solar-driven photocatalysis

A rational design of heterojunctions with high-quality contacts is essential for efficiently separating photogenerated charge carries and boosting the solar-driven harvesting capability. Herein, we fabricated a novel heterojunction of SnO2 quantum dots-anchored CdS-CdCO3 with g-C3N4 nanosheets as a superior photocatalyst. SnO2 quantum dots (SQDs) with positively charged surfaces were tightly anchored on the negatively charged surface of CdS nanosheets (NSs). The resulting CdS@SnO2 was finally decorated with g-C3N4 NSs, and a new crystalline phase of CdS-CdCO3 was formed during the hydrothermal decoration process, g-C3N4 decorated CdS-CdCO3@SnO2 (CdS-CdCO3@SnO2@g-C3N4). The as-synthesized photocatalysts were evaluated for the degradation of methyl orange dye under solar light conditions. The CdS-CdCO3@SnO2@g-C3N4 exhibited 7.7-fold and 2.3-fold enhancements in photocatalytic activities in comparison to those of the bare CdS and CdS@SnO2 NSs, respectively. The optimal performance of CdS-CdCO3@SnO2@g-C3N4 is primarily attributed to the cascade-type conduction band alignments between 2D/0D/2D heterojunctions, which can harvest maximum solar light and effectively separate photoexcited charge carriers. This work provides a new inspiration for the rational design of 2D/0D/2D heterojunction photocatalyst for green energy generation and environmental remediation applications.

Density functional theory-based modeling of the half-metallic g-C3N4/CoN4 heterojunction for photocatalytic water splitting reaction

Using density functional theory (DFT), we have investigated the structural, optical, electronic and magnetic properties of a graphitic carbon nitride (g-C3N4) and CoN4 composite to explore the effect of the heterojunction on the photocatalytic performance of g-C3N4. The structure of g-C3N4 is modified while complexing with CoN4 and the corresponding stabilization is confirmed through adhesion energy calculation. The phonon spectra analysis furthermore guaranteed the lattice-dynamic stability of the CoN4 bulk and the CoN4 slab. Pristine g-C3N4 is a wide band gap semiconductor, which becomes half metallic upon CoN4 inclusion. The metallicity in the g-C3N4/CoN4 composite originates from the spin down channel, keeping the spin up channel in a semiconducting state. The charge density analysis and work function calculation suggest a substantial amount of charge transfer from g-C3N4 to the CoN4 unit in the g-C3N4/CoN4 heterojunction. The model heterojunction of the g-C3N4/CoN4 composite can enhance the utilization ratio of visible light for the g-C3N4 photocatalyst. In g-C3N4/CoN4, the valence band maximum (VBM) has a more positive potential compared to O2/H2O (+1.23 V) on the normal hydrogen electrode (NHE) scale. However, the conduction band minimum (CBM) displays a more negative potential compared to H+/H2 (0 V) on the NHE scale. The details of the band structure, density of states and band edge position determining calculations confirm that the g-C3N4/CoN4 composite forms a type 1 heterojunction, making it a suitable photocatalyst for water splitting reaction. The practical application of the g-C3N4/CoN4 heterostructure as a photocatalyst was substantiated in the presence of polar solvent (water) by calculating the band gap, charge transfer interaction and charge density difference. There is a significant decrease of charge transfer and thereby charge density difference in the g-C3N4/CoN4 heterojunction in the presence of water; however, it still holds potential for use as a photocatalyst for water splitting reaction. The state-of-the-art theoretical modeling of the g-C3N4/CoN4 heterojunction is the first theoretical study incorporating the CoN4 crystal.

Wastewater Treatment Using High-Performance In Situ Formed Double-Heterojunction Janus Photocatalyst Microparticles Shaped via a Microfluidic Device

In this work, a heterogeneous photocatalysis system is fabricated for treating wastewater containing organic dyes and pharmaceutical substances. Double-heterojunction Janus photocatalysts are formed on the surface of size-tunable polydimethylsiloxane (PDMS) microparticles shaped via simple and low-cost coflow microfluidic devices. Ag0/Ag0-TiO2/TiO2 Janus-like photocatalysts are synthesized on the surface of porous PDMS microparticles as the support in which the metal-semiconductor heterojunction of Ag0/Ag0-TiO2 and the second heterojunction of Ag0-TiO2/TiO2 are created in situ, leading to the formation of Ag0/Ag0-TiO2/TiO2@PDMS photocatalysis systems. To form the heterojunctions on the PDMS surface, the polymer chain etching method is employed as a desired strategy to have half of the TiO2 nanoparticles on the surface of microparticles, which are treated by a Ag source. Using salt additives and the etching method, PDMS microparticles are made porous, providing more surface area for photoreactions. Surprisingly, the highest decomposition efficiencies of 94.4 and 91.1% are achieved for rhodamine B(RhB) and tetracycline (TC), respectively, under visible light for 60 min pH 11, a light source at a distance of 2 cm, 5 mM AgNO3, 10 wt % TiO2, 7 wt % NaCl, and 20 gm/L photocatalyst, which are conditions that result in the best performance for RhB degradation. Regarding the stability of the photocatalysts, no significant change is observed in the performance after five cycles.

Enhancing photocatalytic wastewater treatment: investigating the promising applications of nickel ferrite and its novel nanocomposites

Water contamination ranks highest among the challenges posed by the rapidly increasing environmental contamination, which is thought to be the most pressing issue globally. The development of innovative techniques for the successful removal of diverse types of undesirable pollutants from wastewater would therefore yield a huge return on investment. Nowadays, the removal of many organic and synthetic pollutants from the environmental matrix is anticipated to be possible by photocatalytic degradation, owing to its low energy consumption, high catalytic activity, and low overall cost. In this context, magnetic nanoparticles received greater attention as photocatalytic materials from the scientific community in wastewater treatment for the removal of different kinds of pollutants due to their specific properties. The present study provides an overview of the recent advances in water treatment using nickel ferrite nanoparticles and their nanocomposites as photocatalysts. Furthermore, a proposed mechanism for these photocatalysts to generate active free radicals under visible and ultraviolet light has been described. The review concludes that photocatalysts based on NiFe2O4 have potential applications in water purification technologies. However, more research is still needed to determine their practical application in water treatment facilities.

Poly Meta-Aminophenol (PmAP) as a Solid-State Electron Mediator in the Z-Scheme, Ag3PO4/CoFe2O4 Heterojunction: Mineralization of Highly Concentrated Bisphenol-A and Reactive Dyes Water Pollutants

This study demonstrated the effectiveness of poly meta-aminophenol (PmAP) as a solid electron mediator in the Z-scheme photocatalytic system for organic pollutants (viz. bisphenol-A and reactive dyes) mineralization and also illustrated how PmAP transported the photogenerated electrons from an O2-emitting photocatalyst (Ag3PO4) to a H2-emitting photocatalyst (CoFe2O4) enabling enhanced photocatalytic activity under visible light irradiation. The PmAP/Ag3PO4-CoFe2O4 (PAC-10), was prepared by a two-step process and characterized by various analytical methods to assess the impact of PmAP on optical, photocatalytic, and electrochemical characteristics of the CoFe2O4 (CFO)/Ag3PO4 composite. The morphological investigation revealed that the PmAP sheet was nicely decorated with evenly distributed Ag3PO4 and CoFe2O4 particles. The M-S plot and impedance analyses were used to assess the electrochemical capabilities of the catalyst. Z-scheme charge transfer pathways were well supported by the radical trapping experiment and HRTEM analysis of Pt photodeposited PAC-10 photocatalysts during the photoreaction. Because of its magnetic nature and ease of synthesis, the PAC-10 offers an easily recyclable Z-scheme photocatalytic system that has the potential for purifying wastewater with high concentrations (up to 100 mg/L) of organic pollutants within 30 min of visible light exposition.

Synergistic Effects of Co3O4-gC3N4-Coated ZnO Nanoparticles: A Novel Approach for Enhanced Photocatalytic Degradation of Ciprofloxacin and Hydrogen Evolution via Water Splitting

This research evaluates the efficacy of catalysts based on Co3O4-gC3N4@ZnONPs in the degradation of ciprofloxacin (CFX) and the photocatalytic production of H2 through water splitting. The results show that CFX experiences prompt photodegradation, with rates reaching up to 99% within 60 min. Notably, the 5% (Co3O4-gC3N4)@ZnONPs emerged as the most potent catalyst. The recyclability studies of the catalyst revealed a minimal activity loss, approximately 6%, after 15 usage cycles. Using gas chromatography-mass spectrometry (GC-MS) techniques, the by-products of CFX photodegradation were identified, which enabled the determination of the potential degradation pathway and its resultant products. Comprehensive assessments involving photoluminescence, bandgap evaluations, and the study of scavenger reactions revealed a degradation mechanism driven primarily by superoxide radicals. Moreover, the catalysts demonstrated robust performance in H2 photocatalytic production, with some achieving outputs as high as 1407 µmol/hg in the visible spectrum (around 500 nm). Such findings underline the potential of these materials in environmental endeavors, targeting both water purification from organic pollutants and energy applications.

Visible-light-driven photodegradation of methylene blue and doxycycline hydrochloride by waste-based S-scheme heterojunction photocatalyst Bi5O7I/PCN/tea waste biochar

Herein, we have reported a photocatalytic Bi5O7I, protonated g-C3N4 heterojunction with directional charge transfer channels provided by tea waste biochar to achieve effective e-/h+ pair isolation for the improved degradation of Methylene blue (MB) and Doxycycline hydrochloride (DCHCl). An S-scheme heterojunction was fabricated via the novel method that combined hydrothermal and ultrasonic dispersion, followed by an electrostatic self-assembly route. The as-fabricated Bi5O7I/protonated g-C3N4/Tea waste biochar heterojunction formed a strong contact at the interface, as supported by the electron microscopic results. As per the adsorption and photocatalytic degradation kinetics study, Bi5O7I/Tea waste biochar/protonated g-C3N4 (40 wt%) heterojunction showed a higher adsorption rate of 41.56% and 32% for MB and DCHCl within 30 min in the dark. Also, 92.02% MB and 90.21% DCHCl degradation rates in 60 and 90 min, respectively, are approximately 43 and 32 times higher than bare Bi5O7I and protonated g-C3N4 photocatalysts. The highest adsorption and degradation rate was achieved owing to the addition of Tea waste biochar and protonated g-C3N4 in a controlled ratio, and the sufficient interfacial contact between Bi5O7I and protonated g-C3N4 is for the improved isolation rate of e-/h+ pairs as evidenced by zeta potential values photoluminescence spectra as well as from scanning and transmission electron microscopy. Moreover, Bi5O7I/Tea waste biochar/protonated g-C3N4 (40 wt%) possessed high stability and recyclability after four consecutive cycles without much altering the degradation ability. Therefore, we believe that the as-fabricated Bi5O7I/Tea waste biochar/protonated g-C3N4 (40 wt%) provides new insight into the highly efficient S-scheme mechanisms significant for accelerating multicomponent photocatalytic redox reactions; while forming an effective visible light responsive candidate for treating wastewater.

Synergistic photogeneration of reactive oxygen species by Fe species self-deposited on resorcinol-formaldehyde towards the degradation of phenols under visible light

In this study, a heterogeneous photo-Fenton catalyst of Fe species/resorcinol-formaldehyde (Fe/RF) was synthesized in the degradation process of phenols under visible light in a homogeneous photo-Fenton system. The in situ generated H2O2 by bare RF in the medium and the follow-added Fe2+ can construct homogeneous photo-Fenton system, and Fe/RF heterogeneous photo-Fenton catalyst was formed after the reaction through Fe species self-deposition. Due to the addition of Fe2+, more hydroxyl radical (·OH) generated in the homogeneous Fenton system, which lead to the higher degradation efficiency of phenols that achieved 90.5 % with 150 min. Fe/RF was subsequently formed and more C=O functional group in the structure appeared, which was beneficial to the production of H2O2. The above-mentioned results can be proved by the involved calculation and experimental results. Fe species, including Fe2+ and Fe3+, were beneficial to the conversion of reactive oxygen species (ROSs), and further improved the degradation efficiency of Phenols. Since the existence of photo-generated electrons, Fe2+ concentration in the solution can maintain a stable level. Interestingly, the degradation efficiency of Phenols was higher when Fe3+ was used instead of Fe2+ as the additive, which may be caused by the promotive effect of Fe3+ on singlet oxygen (1O2) generation. In addition, the degradation efficiency of Phenols under alkaline conditions was higher than that under acid conditions, which broke the limit of traditional Fenton process that works mostly in acidic medium. This study shows promising results in terms of synergistic photocatalytic/photo-Fenton processes for the degradation of organic pollutants in water.

New insight on interfacial charge transfer at graphitic carbon nitride/sodium niobate heterojunction under piezoelectric effect for the generation of reactive oxygen species

Piezocatalytic removal of metronidazole (MET) using graphitic carbon nitride (g-C3N4, GCN)/sodium niobate (NaNbO3) heterojunction was investigated under ultrasonication. Herein, optimized GCN(50)/NaNbO3 heterojunction achieved 87.2% MET removal within 160 min (k = 0.0138 min-1). A new pathway for the generation of reactive oxygen species (ROS) via GCN(50)/NaNbO3 piezocatalytic heterojunction was identified. The type-II heterojunction formulated using optimized GCN(50)/NaNbO3 was found to generate hydroxyl radical (.OH); however, it was thermodynamically not feasible. The main reasons are; (i) piezopotential generated converted type-II to S-scheme heterojunction and resulted in the participation of high oxidizing potential holes in valence band (VB) of NaNbO3, and (ii) formation of depletion region at the GCN-water interface and subsequent improvement in the redox potential of holes, and (iii) piezopotential generated at NaNbO3 provided bias to GCN and established a piezo-electrocatalytic system. The higher screening of piezopotential in presence of external ions was found to reduce the generation of .OH. Overall, self-powered NaNbO3 has great ability to improve interfacial charge transfer at GCN(50)/NaNbO3 to form ROS.

Condensation-assembly synthesis of three-dimensionally porous boron nitride for effective oil removal

A template-free pyrolysis route has been developed using condensation-assembly precursors made of trimethoxyboroxane (TMB) and melamine (M) to cater the requirements of an industrial real-world environment. The precursors contain abundant B-N bonds and exhibit a high level of interconnectivity, resulting in 3D-PBN with enhanced mechanical properties and the ability to be easily customized in terms of shape. Moreover, 3D-PBN demonstrates rapid adsorption kinetics and excellent reusability, efficiently removing up to 270% of its own weight of fuel within 30 s and being readily regenerated through simple calcination. Even after undergoing 50 cycles, the mechanical properties remain at a remarkable 80%, while the adsorption performance exceed 95%. Furthermore, a comprehensive analysis of thermal behavior from precursor to 3D-PBN has been conducted, leading to the proposal of a molecular-scale evolution process comprising four major steps. This understanding enables us to control the phase reaction and regulate the composition of the products, which is crucial for determining the characteristics of the final product.

An S-scheme NH2-MIL-101(Fe)@MCN/Bi2O3 heterojunction photocatalyst for the degradation of tetracycline and production of H2O2

Effective and durable photocatalysts are essential for the decomposition of persistent contaminants and the generation of hydrogen peroxide. In this study, we successfully constructed an S-type heterojunction by in situ growing Bi2O3 nanocrystals and NH2-MIL-101(Fe) onto surface-modified g-C3N4. The process of charge transfer in the S-type heterojunction was confirmed using ISI-XPS, DFT calculations, capture experiments, and EPR signals. The combined influence of the heterojunction and MOF demonstrated remarkable photocatalytic performance in the breakdown of tetracycline (TC) and the generation of hydrogen peroxide (H2O2). In the enhanced setup (10%-NH2-MIL-101(Fe)@MCN/Bi2O3), full degradation of TC was accomplished within 50 min under visible light exposure. Additionally, a notable H2O2 yield of 655.63 μmol/g was attained, all achieved without the necessity of sacrificial agents or supplementary oxygen. Based on the outcomes of the dual functionality, the exceptional performance of the ternary composite material can be ascribed to the collaborative influence of the heterojunction and MOF. This collaborative effect expands the light absorption range in the visible region, suppresses the recombination of electron-hole pairs, and enhances the photocatalytic redox ability. The system demonstrates significant potential in the efficient in situ production of H2O2 and removal of recalcitrant organic pollutants in pure water.

An Emerging Family of Piezocatalysts: 2D Piezoelectric Materials

Piezocatalysis is an emerging technique that holds great promise for the conversion of ubiquitous mechanical energy into electrochemical energy through piezoelectric effect. However, mechanical energies in natural environment (such as wind energy, water flow energy, and noise) are typically tiny, scattered, and featured with low frequency and low power. Therefore, a high response to these tiny mechanical energies is critical to achieving high piezocatalytic performance. In comparison to nanoparticles or 1D piezoelectric materials, 2D piezoelectric materials possess characteristics such as high flexibility, easy deformation, large surface area, and rich active sites, showing more promise in future for practical applications. In this review, state-of-the-art research progresses on 2D piezoelectric materials and their applications in piezocatalysis are provided. First, a detailed description of 2D piezoelectric materials are offered. Then a comprehensive summary of the piezocatalysis technique is presented and examines the piezocatalysis applications of 2D piezoelectric materials in various fields, including environmental remediation, small-molecule catalysis, and biomedicine. Finally, the main challenges and prospects of 2D piezoelectric materials and their applications in piezocatalysis are discussed. It is expected that this review can fuel the practical application of 2D piezoelectric materials in piezocatalysis.

Facile fabrication of carboxymethylcellulose/ZnO/g-C3N4 containing nutmeg extract with photocatalytic performance for infected wound healing

New topical antibacterial agents are required to inhibit and development of bacteria and also promoting the wound healing process. This study was evaluating the healing effect of Myristica fragrans extract coated with carboxymethyl cellulose, zinc oxide and graphite carbon nitride (CMC/ZnO/g-C3N4/MyR) by photocatalytic process on the healing process of full-thickness infectious excision wounds in mice. Nanosheets were prepared and physicochemical properties were evaluated. Safety, in vitro release, antibacterial activities under in vitro and in vivo condition, wound contraction, histopathological properties and the protein expressions of tumor necrosis factor-α (TNF-α), collagen 1A (COL1A) and CD31 were also evaluated. Physicochemical properties confirmed their successful synthesis. Nanosheets exhibited antibacterial activity under in vitro and in vivo conditions. The formulations containing CMC/ZnO/g-C3N4/MyR, significantly (P < 0.05) competed with standard ointment of mupirocin for accelerating the wound healing process due to their effects on bacterial count and the expression of TNF-α and also accelerating the proliferative phase. This structure can be used as a safe structure in combination with other agents for accelerating the wound healing process following future clinical studies.

Facile Synthesis of gC3N4-Exfoliated BiFeO3 Nanocomposite: A Versatile and Efficient S-Scheme Photocatalyst for the Degradation of Various Textile Dyes and Antibiotics in Water

Water pollution engendered from textile dyes and antibiotics is a globally identified precarious concern that is causing dreadful risks to human health as well as aquatic lives. This predicament is escalating the quest to develop competent photocatalysts that can degrade these water pollutants under solar light irradiation. Herein, we report an efficient photocatalyst comprising a hierarchical structure by integrating the layered graphitic carbon nitride (gC3N4) with nanoflakes of exfoliated BiFeO3. The coexistence of these two semiconducting nanomaterials leads to the formation of an S-scheme heterojunction. This nanocomposite demonstrated its excellent photocatalytic activity toward the degradation of several textile dyes (Yel CL2R, Levasol Yellow-CE, Levasol Red-GN, Navy Sol-R, Terq-CL5B) and various antibiotics (such as tetracycline hydrochloride (TCH), ciprofloxacin (CPX), sulfamethoxazole (SMX), and amoxicillin (AMX)) under the simulated solar light irradiation. As this photocatalyst exhibits its versatile activity toward the degradation of several commercial dyes as well as antibiotics, this work paves the path to develop a reasonable, eco-benign, and highly efficient photocatalyst that can be used in the practical approach to remediate environmental pollution.

Developing self-floating N-defective graphitic carbon nitride photocatalyst for efficient photodegradation of Microcystin-LR under visible light

The frequent occurrence of algal blooms in water bodies leads to a significant accumulation of microcystin-LR (MC-LR). In this study, we developed a porous foam-like self-floating N-deficient g-C3N4 (SFGN) photocatalyst for efficient photocatalytic degradation of MC-LR. Both the characterization results and DFT calculations indicate that the surface defects and floating state of SFGN synergistically enhance light harvesting and photogenerated carrier migration rate. The photocatalytic process achieved a nearly 100 % removal rate of MC-LR within 90 min, while the self-floating state of SFGN maintained good mechanical strength. ESR and radical capture experiments revealed that the primary active species responsible for the photocatalytic process was OH. This finding confirmed that the fragmentation of MC-LR occurs as a result of OH attacking the MC-LR ring. LC-MS analysis indicated that majority of the MC-LR molecules were mineralized into small molecules, allowing us to infer possible degradation pathways. Furthermore, after four consecutive cycles, SFGN exhibited remarkable reusability and stability, highlighting the potential of floating photocatalysis as a promising technique for MC-LR degradation.

Facile synthesis of FeCeOx nanoparticles encapsulated carbon nitride catalyst for highly efficient and recyclable synthesis of substituted imidazoles

Herein, we developed a novel composite called FeCeOx@g-C3N4 through a combination of sonication, sintering, and hydrothermal techniques to implement the principles of green chemistry by utilizing reusable nanocomposites in one-pot reactions. To gain a comprehensive understanding of the catalyst's structure, composition, and morphology, various characterization methods were employed. These included FT-IR analysis to examine chemical bonds, SEM and TEM imaging to visualize the catalyst's surface and internal structure, TGA to assess thermal stability, EDS for elemental composition analysis, and XRD to determine crystal structure. The FeCeOx@g-C3N4 nanocatalyst demonstrated remarkable efficacy in the one-pot synthesis of 2,4,5-trisubstituted and 1,2,4,5-tetrasubstituted imidazole. Noteworthy features of this catalyst included high percentage yield, mild reaction conditions, short reaction time, and an efficient and straightforward procedure. Furthermore, the FeCeOx@g-C3N4 composite exhibited excellent recyclability and reusability. It could be recycled and reused up to four times without a significant decline in catalytic activity.

Strategies for Improving the Photocatalytic Hydrogen Evolution Reaction of Carbon Nitride-Based Catalysts

Due to the depletion of fossil fuels and their-related environmental issues, sustainable, clean, and renewable energy is urgently needed to replace fossil fuel as the primary energy resource. Hydrogen is considered as one of the cleanest energies. Among the approaches to hydrogen production, photocatalysis is the most sustainable and renewable solar energy technique. Considering the low cost of fabrication, earth abundance, appropriate bandgap, and high performance, carbon nitride has attracted extensive attention as the catalyst for photocatalytic hydrogen production in the last two decades. In this review, the carbon nitride-based photocatalytic hydrogen production system, including the catalytic mechanism and the strategies for improving the photocatalytic performance is discussed. According to the photocatalytic processes, the strengthened mechanism of carbon nitride-based catalysts is particularly described in terms of boosting the excitation of electrons and holes, suppressing carriers recombination, and enhancing the utilization efficiency of photon-excited electron-hole. Finally, the current trends related to the screening design of superior photocatalytic hydrogen production systems are outlined, and the development direction of carbon nitride for hydrogen production is clarified.

Graphitic carbon nitride (g-C3N4)-assisted materials for the detection and remediation of hazardous gases and VOCs

Graphitic carbon nitride (g-C3N4)-based materials are attracting attention for their unique properties, such as low-cost, chemical stability, facile synthesis, adjustable electronic structure, and optical properties. These facilitate the use of g-C3N4 to design better photocatalytic and sensing materials. Environmental pollution by hazardous gases and volatile organic compounds (VOCs) can be monitored and controlled using eco-friendly g-C3N4- photocatalysts. Firstly, this review introduces the structure, optical and electronic properties of C3N4 and C3N4 assisted materials, followed by various synthesis strategies. In continuation, binary and ternary nanocomposites of C3N4 with metal oxides, sulfides, noble metals, and graphene are elaborated. g-C3N4/metal oxide composites exhibited better charge separation that leads to enhancement in photocatalytic properties. g-C3N4/noble metal composites possess higher photocatalytic activities due to the surface plasmon effects of metals. Ternary composites by the presence of dual heterojunctions improve properties of g-C3N4 for enhanced photocatalytic application. In the later part, we have summarised the application of g-C3N4 and its assisted materials for sensing toxic gases and VOCs and decontaminating NOx and VOCs by photocatalysis. Composites of g-C3N4 with metal and metal oxide give comparatively better results. This review is expected to bring a new sketch for developing g-C3N4-based photocatalysts and sensors with practical applications.

Research on the Antibacterial Properties of MXene-Based 2D-2D Composite Materials Membrane

Novel MXene-based two-dimensional (2D) membranes are widely used for water purification due to their highly controllable structure and antibacterial properties. However, in the process of membrane separation, the problems of membrane fouling, especially biological fouling, limits the further application of MXene-based membranes. In this study, in order to improve the antibacterial and separation properties of membranes, three kinds of MXene-based 2D-2D composite membranes (M2~M4) were prepared using polyethersulfone (PES) as the substrate, which were GO@MXene, O-g-C₃N₄@MXene and BiOCl@MXene composite membranes respectively. The results showed that the antibacterial activity of M2~M4 against Escherichia coli and Staphylococcus aureus was further improved, especially the antibacterial ratio of M4 against Escherichia coli and Staphylococcus aureus was up to 50% and 82.4%, respectively. By comparing the surface morphology of MXene membrane and modified membrane treated bacteria through scanning electron microscopy (SEM), it was found that the cell density on modified membrane was significantly lower than that of pure MXene membrane.

Signal-amplified electrochemiluminescence aptasensor for mucin 1 determination using CdS QDs/g-C3N4 and Au NPs@TEOA

A novel electrochemiluminescence (ECL) aptasensor, using graphite carbonitride (g-C₃N₄) capped CdS quantum dots (CdS QDs@g-C₃N₄) and Au nanoparticles decorated triethanolamine (AuNPs@TEOA) as dual coreactants, was proposed for the determination of mucin 1 (MUC1). Higher ECL efficiency was acquired due to the double enhancement contribution of CdS QDs and TEOA to Ru (bpy)₃²⁺ ECL. Additionally, AuNPs@TEOA also acted as nanocarrier for MUC1 aptamer immobilization. After the aptasensor was incubated in target MUC1, the decreased ECL emission was obtained because of the poor conductivity of MUC1. The ECL aptasensor displayed a good linear correlation for MUC1 in the range 0.1 pg mL^-1 -1000 ng mL^-1, and the detection limit was 33 fg mL^-1. MUC1 spiked into human serum samples was quantified to assess the practicability of the ECL aptasensor.

Biofunctionalized CdS Quantum Dots: A Case Study on Nanomaterial Toxicity in the Photocatalytic Wastewater Treatment Process

The toxic nature of inorganic nanostructured materials as photocatalysts is often not accounted for in traditional wastewater treatment reactions. Particularly, some inorganic nanomaterials employed as photocatalysts may release secondary pollutants in the form of ionic species that leach out due to photocorrosion. In this context, this work is a proof-of-concept study for exploring the environmental toxicity effect of extremely small-sized nanoparticles (<10 nm) like quantum dots (QDs) that are employed as photocatalysts, and in this study, cadmium sulfide (CdS) QDs are chosen. Typically, CdS is an excellent semiconductor with suitable bandgap and band-edge positions that is attractive for applications in solar cells, photocatalysis, and bioimaging. However, the leaching of toxic cadmium (Cd²⁺) metal ions due to the poor photocorrosion stability of CdS is a matter of serious concern. Therefore, in this report, a cost-effective strategy is devised for biofunctionalizing the active surface of CdS QDs by employing tea leaf extract, which is expected to hinder photocorrosion and prevent the leaching of toxic Cd²⁺ ions. The coating of tea leaf moieties (chlorophyll and polyphenol) over the CdS QDs (referred to hereafter as G-CdS QDs) was confirmed through structural, morphological, and chemical analysis. Moreover, the enhanced visible-light absorption and emission intensity of G-CdS QDs in comparison to that of C-CdS QDs synthesized through a conventional chemical synthesis approach confirmed the presence of chlorophyll/polyphenol coating. Interestingly, the polyphenol/chlorophyll molecules formed a heterojunction with CdS QDs and enabled the G-CdS QDs to exhibit enhanced photocatalytic activity in the degradation of methylene blue dye molecules over C-CdS QDs while effectively preventing photocorrosion as confirmed from cyclic photodegradation studies. Furthermore, detailed toxicity studies were conducted by exposing zebrafish embryos to the as-synthesized CdS QDs for 72 h. Surprisingly, the survival rate of the zebrafish embryos exposed to G-CdS QDs was equal to that of the control, indicating a significant reduction in the leaching of Cd²⁺ ions from G-CdS QDs in comparison to C-CdS QDs. The chemical environment of C-CdS and G-CdS before and after the photocatalysis reaction was examined by X-ray photoelectron spectroscopy. These experimental findings prove that biocompatibility and toxicity could be controlled by simply adding tea leaf extract during the synthesis of nanostructured materials, and revisiting green synthesis techniques can be beneficial. Furthermore, repurposing the discarded tea leaves may not only facilitate the control of toxicity of inorganic nanostructured materials but can also help in enhancing global environmental sustainability.

g-C3N4-Co3O4 Z-Scheme Junction with Green-Synthesized ZnO Photocatalyst for Efficient Degradation of Methylene Blue in Aqueous Solution

A simple wet chemical ultrasonic-assisted synthesis method was employed to prepare visible light-driven g-C₃N₄-ZnO-Co₃O₄ (GZC) heterojunction photocatalysts. X-ray diffraction (XRD), scanning electromicroscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), Brunauer-Emmett-Teller (BET), ultraviolet (UV), and electrochemical impedance spectroscopy (EIS) are used to characterize the prepared catalysts. XRD confirms the homogenous phase formation of g-C₃N₄, ZnO, and Co₃O₄, and the heterogeneous phase for the composites. The synthesized ZnO and Co₃O₄ by using cellulose as a template show a rod-like morphology. The specific surface area of the catalytic samples increases due to the cellulose template. The measurements of the energy band gap of a g-C₃N₄-ZnO-Co₃O₄ composite showed red-shifted optical absorption to the visible range. The photoluminescence (PL) intensity decreases due to the formation of heterojunction. The PL quenching and EIS result shows that the reduction of the recombination rate and interfacial resistance result in charge carrier kinetic improvement in the catalyst. The photocatalytic performance in the degradation of MB dye of the GZC-3 composite was about 8.2-, 3.3-, and 2.5-fold more than that of the g-C₃N₄, g-C₃N₄-ZnO, and g-C₃N₄-Co₃O₄ samples. The Mott-Schottky plots of the flat band edge position of g-C₃N₄, ZnO, Co₃O₄, and Z-scheme g-C₃N₄-ZnO-Co₃O₄ photocatalysts may be created. Based on the stability experiment, GZC-3 shows greater photocatalytic activity after four recycling cycles. As a result, the GZC composite is environmentally friendly and efficient photocatalyst and has the potential to consider in the treatment of dye-contaminated wastewater.

Size effect of CoS2 cocatalyst on photocatalytic hydrogen evolution performance of g-C3N4

The main goal of researchers is to obtain cheap cocatalysts that can promote the photocatalytic activity of catalysts. In this work, a series of CoS₂/g-C₃N₄ (denoted as CoS₂/CN) composite photocatalysts were synthesized by photodepositing CoS₂ on g-C₃N₄ surface. The size of CoS₂ species could be tuned from single-atom to nanometer scale, which had effect on photocatalysis. The 5CoS₂/CN sample with proper nano size of CoS₂ cocatalyst had the best photocatalytic performance (1707.19 μmol g^-1h^-1) in producing H₂ under visible light irradiation (λ > 420 nm). Its photocatalytic activity was about 1434.6 times higher than that of pure g-C₃N₄ and almost equal with that of Pt/CN catalyst (1799.54 μmol g^-1h^-1). The Density Functional Theory (DFT) calculation results further suggested that the ability of accumulating the electrons of the cocatalyst was based on the size effect of CoS₂, and the proper size of the cocatalyst efficiently promoted the separation of photogenerated electron-hole pairs.

Epitaxially grown silicon-based single-atom catalyst for visible-light-driven syngas production

Improving the dispersion of active sites simultaneous with the efficient harvest of photons is a key priority for photocatalysis. Crystalline silicon is abundant on Earth and has a suitable bandgap. However, silicon-based photocatalysts combined with metal elements has proved challenging due to silicon's rigid crystal structure and high formation energy. Here we report a solid-state chemistry that produces crystalline silicon with well-dispersed Co atoms. Isolated Co sites in silicon are obtained through the in-situ formation of CoSi₂ intermediate nanodomains that function as seeds, leading to the production of Co-incorporating silicon nanocrystals at the CoSi₂/Si epitaxial interface. As a result, cobalt-on-silicon single-atom catalysts achieve an external quantum efficiency of 10% for CO₂-to-syngas conversion, with CO and H₂ yields of 4.7 mol g_(Co)^-1 and 4.4 mol g_(Co)^-1, respectively. Moreover, the H₂/CO ratio is tunable between 0.8 and 2. This photocatalyst also achieves a corresponding turnover number of 2 × 10⁴ for visible-light-driven CO₂ reduction over 6 h, which is over ten times higher than previously reported single-atom photocatalysts.

Chitosan-Grafted Carbon Oxynitride Nanoparticles: Investigation of Photocatalytic Degradation and Antibacterial Activity

In this work, a series of chitosan (CS)-grafted carbon oxynitride (OCN) nanoparticles (denoted as CS-OCN) were successfully synthesized for the first time by thermal polycondensation and subsequent esterification. The structure and photocatalytic performance of CS-OCN nanoparticles were investigated. The XPS spectra of CS-OCN-3 showed the presence of amino bonds. The optimal photocatalytic degradation efficiency of the synthesized CS-OCN-3 could reach 94.3% within 390 min, while the photocurrent response intensity was about 150% more than that of pure OCN. The improved photocatalytic performance may be mainly attributed to the enhanced photogenerated carrier’s separation and transportation and stronger visible light response after CS grafting. In addition, the inhibition diameter of CS-OCN-3 reached 23 mm against E. coli within 24 h under visible light irradiation, exhibiting excellent photocatalytic bactericidal ability. The results of bacterial inhibition were supported by absorbance measurements (OD600) studies of E. coli. In a word, this work provided a rational design of an efficient novel metal-free photocatalyst to remove bacterial contamination and accelerate the degradation of organic dyes.

One-step nitrogen defect engineering of polymeric carbon nitride for visible light-driven photocatalytic O2 reduction to H2O2

Polymeric carbon nitride (PCN) is an important metal-free photocatalyst for visible light-driven hydrogen peroxide (H₂O₂) production from O₂ reduction. Herein, we synthesized the DPCN catalysts possessing nitrogen defects by one-step thermal polymerization of urea in N₂ stream. As compared to the PCN conventionally synthesized in static air, X-ray photoelectrons spectroscopy (XPS) characterization disclosed that there are more pyridinic N defects in the DPCN catalysts, which is attributed to the removal of a proportion of NH₃ released from urea pyrolysis by flowing N₂. UV-vis diffuse reflectance spectroscopy (UV-vis DRS), Mott-Schottky, steady-state and time-resolved photoluminescence (PL), and electrochemical impedance spectroscopy (EIS) characterizations revealed that the introduction of the nitrogen defects narrows down the band gap, improves the density of the photoexcited charge carriers, prolongs the lifetime of the charge carriers, and enhances the charge transfer efficiency. In visible light-driven photocatalytic O₂ reduction to H₂O₂, the optimal DPCN catalyst afforded an activity of 4.35 times that of the PCN catalyst and a H₂O₂ concentration of 2.83 mmol L^-1 after 10 h of visible light irradiation. This one-step thermal polymerization approach is valid when replacing N₂ stream with Ar and He streams.

Nanoarchitecture of a Two-Dimensional Few-Layer Graphene Oxide/π-Conjugated Polyimide Composite for Enhanced Photocatalytic Performance

A novel two-dimensional graphene oxide/sulfur-doped polyimide (GO/SPI) hybrid polymer photocatalyst was synthesized by a facile ultrasonic chemical method. The characterization results showed that the skeleton structure of SPI was not changed when the few layers of GO were wrapped on the surface. Due to the excellent charge transport characteristics of GO and the strong π-π stacking interaction between two-dimensional GO and SPI, the photogenerated carrier transport capability of the GO/SPI composites was significantly enhanced compared with that of SPI. The efficient transmission and separation of photogenerated charge carriers significantly improve the photocatalytic degradation of the methyl orange activity of the GO/SPI composite. This work provides a facile and new way for the synthesis of metal-free inorganic-organic composite photocatalysts with high efficiency and low cost.

B-Doped g-C3N4/Black TiO2 Z-Scheme Nanocomposites for Enhanced Visible-Light-Driven Photocatalytic Performance

Black TiO₂ with abundant oxygen vacancies (OVs)/B-doped graphitic carbon nitride (g-C₃N₄) Z-scheme heterojunction nanocomposites are successfully prepared by the one-pot strategy. The OVs can improve not only photogenerated carrier separation, but also the sorption and activation of antibiotic compounds (tetracycline hydrochloride, TC). The prepared heterojunction photocatalysts with a narrow bandgap of ∼2.13 eV exhibit excellent photocatalytic activity for the degradation of tetracycline hydrochloride (65%) under visible light irradiation within 30 min, which is several times higher than that of the pristine one. The outstanding photocatalytic property can be ascribed to abundant OVs and B element-dope reducing the bandgap and extending the photo-response to the visible light region, the Z-scheme formation of heterojunctions preventing the recombination of photogenerated electrons and holes, and promoting their effective separation.

Photoactive catalysts for treatment of air pollutants: a bibliometric analysis

In recent years, photocatalysts are becoming attractive to researchers in exploring their application for treatment of air pollutants. Exposure to ultra-violet visible (UV-VIS) light on photocatalysts often makes them active in decomposing various toxic materials into less or environment-friendly products. Thus, identification, as well as simple synthesis and processing of photocatalysts, could ultimately lead to technologies for the cost-effective mitigation of environmental hazards. A bibliometric analysis has been carried out here to understand and assess the development in photocatalyst research. The data retrieved from the Scopus database on the topic for 2000-2020 were analyzed to investigate the research activities of the past to foresight the future. Various facets of bibliometry were investigated to produce this holistic article. The contribution of various countries, institutions, and authors were investigated. Numerous facets of photocatalyst such as types of photocatalysts, their modification through metal and non-metal doping, their pollutants treatment potency, types of reactors for photocatalysis, factors influencing treatment performance, and models used for designing reactors were examined. In brevity, substantial growth was observed in the last two decades. Contribution of China, the USA, Japan, and India were notable. Chinese universities contributed majorly to the research. Applied Catalysis B: Environmental Journal was the topic's main journal and Titanium dioxide was the hotspot in photocatalytic research. The research development, problem disclosure, adopted strategies, and materials explored on the photocatalysis for air pollution treatment over recent years across the world could be insightful to the researchers and eventually will be beneficial to formulate new research strategies.

A Targeted Review of Current Progress, Challenges and Future Perspective of g-C3 N4 based Hybrid Photocatalyst Toward Multidimensional Applications

The increasing demand for searching highly efficient and robust technologies in the context of sustainable energy production totally rely onto the cost-effective energy efficient production technologies. Solar power technology in this regard will perceived to be extensively employed in a variety of ways in the future ahead, in terms of the combustion of petroleum-based pollutants, CO₂ reduction, heterogeneous photocatalysis, as well as the formation of unlimited and sustainable hydrogen gas production. Semiconductor-based photocatalysis is regarded as potentially sustainable solution in this context. g-C₃ N₄ is classified as non-metallic semiconductor to overcome this energy demand and enviromental challenges, because of its superior electronic configuration, which has a median band energy of around 2.7 eV, strong photocatalytic stability, and higher light performance. The photocatalytic performance of g-C₃ N₄ is perceived to be inadequate, owing to its small surface area along with high rate of charge recombination. However, various synthetic strategies were applied in order to incorporate g-C₃ N₄ with different guest materials to increase photocatalytic performance. After these fabrication approaches, the photocatalytic activity was enhanced owing to generation of photoinduced electrons and holes, by improving light absorption ability, and boosting surface area, which provides more space for photocatalytic reaction. In this review, various metals, non-metals, metals oxide, sulfides, and ferrites have been integrated with g-C₃ N₄ to form mono, bimetallic, heterojunction, Z-scheme, and S-scheme-based materials for boosting performance. Also, different varieties of g-C₃ N₄ were utilized for different aspects of photocatalytic application i. e., water reduction, water oxidation, CO₂ reduction, and photodegradation of dye pollutants, etc. As a consequence, we have assembled a summary of the latest g-C₃ N₄ based materials, their uses in solar energy adaption, and proper management of the environment. This research will further well explain the detail of the mechanism of all these photocatalytic processes for the next steps, as well as the age number of new insights in order to overcome the current challenges.

Heptazine-Based Ordered-Distorted Copolymers with Enhanced Visible-Light Absorption for Photocatalytic Hydrogen Production

Poly(heptazine imide) (PHI), one of the attractive allotropes of polymeric carbon nitride, has recently received extensive attention in photocatalysis due to its extended conjugation for fast separation and transfer of the charges. However, pristine PHI bears an intrinsic optical absorption band edge at 460 nm, which largely restrains the visible light utilization. Herein, the narrow-bandgap PHI (N-PHI) with an ordered-distorted interface was fabricated from polycondensation of the mixture of NaSCN, cyanuric chloride, and LiCl. Results revealed that the enhanced optical absorption and the promoted separation and transfer of the charge carriers at the interface greatly improved the photocatalytic performance, which endowed N-PHI with an apparent quantum yield of 20 % for hydrogen production at 450 nm.

A smartphone-adaptable chromogenic and fluorogenic sensor for rapid visual detection of toxic hydrazine in the environment

Hydrazine is an essential chemical in industries, but its high toxicity poses great threats to human health and environmental safety. Hence, it is of great significance to monitor the hydrazine in environment. In this work, we presented a chromogenic and fluorogenic dual-mode sensor RA for the detection of hydrazine based on nucleophilic substitution reaction. A linear relationship was obtained between the fluorescence intensity and the concentrations of N₂H₄ ranging from 0 to 35 μM (R² = 0.9936). The sensor can determine hydrazine with fast response (within 12 min), low limit of detection (0.129 μM) and high selectivity. RA was successfully used to detect N₂H₄ in real water samples with good recoveries and the results corresponded to the standard method. Furthermore, the sensor-coated portable test papers were fabricated, which can visually quantify hydrazine solutions with obvious fluorescence transformation from colorless to red. Moreover, RA-loaded papers were used to create a smartphone-adaptable RGB values analytical method for quantitative N₂H₄ detection.

Construction of Direct Z-Scheme SnS2 Quantum Dots/Conjugated Polyimide with Superior Photocarrier Separation for Enhanced Photocatalytic Performances

In this study, a novel direct Z-scheme SnS₂ quantum dots/sulfur-doped polyimide (SQDs/SPI) photocatalyst was firstly fabricated by an in situ crystallization growth of SnS₂ quantum dots on sulfur-doped polyimide through a facile hydrothermal method. The photocatalytic hydrogen production activity of 5SQDs/SPI samples reached 3526 μmoL g^-1 in the coexistence of triethanolamine and methanol used as hole sacrificial agents, which is about 13 times higher than that of SPI under the same conditions and 42 times higher than that of SPI only as a hole sacrificial agent. The improvement can be related to the direct Z-scheme charge transfer in the tight interface between SQDs and SPI, which promoted rapid separation and significantly prolonged the lifetime of photoexcited carriers. The Z-scheme charge transfer mechanism was proposed. This discovery comes up with a new strategy for the development of an efficient, environmentally friendly, and sustainable sulfide quantum dots/polymer non-noble metal photocatalyst.

An "off-on" electrochemiluminescence aptasensor for determination of lincomycin based on CdS QDs/carboxylated g-C3N4

A novel electrochemiluminescence (ECL) aptasensor for the determination of lincomycin (LIN) was developed based on CdS QDs/carboxylated g-C₃N₄ (CdS QDs/C-g-C₃N₄). CdS QDs/C-g-C₃N₄ served as the substrate of the aptasensor, and then CdS QDs/C-g-C₃N₄-modified electrode was incubated with aptamer DNA (Apt-DNA). When the non-specific sites of the electrode surface was blocked by 6-mercaptohexanol, the ferrocene-labeled probe (Fer-DNA) was assembled onto the electrode surface through base complementation with Apt-DNA. In the absence of LIN, the ECL signal was quenched effectively by Fer-DNA and a decreased ECL emission (off state) was acquired. On the contrary, LIN was specifically bond with Apt-DNA, and Fer-DNA was detached from the aptasensor surface because of the deformation of Apt-DNA, resulting in an effectively enhanced ECL signal (on state). The constructed ECL aptasensor exhibited a wide detection range for LIN determination (0.05 ng mL^-1-100 μg mL^-1) with a low detection limit (0.02 ng mL^-1). Importantly, the proposed ECL aptasensor showed outstanding accuracy and specificity for LIN determination, and also provided a potential strategy for other antibiotic determinations.

More than One Century of History for Photocatalysis, from Past, Present and Future Perspectives

In this review, we analyzed the history and the past and present trends in photocatalysis research, trying to outline possible scenarios for the future in the medium term. The in-depth analysis of the literature reported here—from a mere bibliometric point of view—allowed us to divide the history of photocatalysis into four different periods characterized by different maturity of the topic and different bibliometric features. The turn of the 20th century saw an explosion in scientific production, which is still continuing now and has reached more than 15,000 papers published each year. Research interest is still growing significantly, and the analysis of different keywords suggests that such growth is substantial and not merely due to “publish or perish” behavior. The analysis of the most-investigated topics in the field of photocatalysis highlighted that, during its history, the focus of the research moved from inorganic oxides to carbon and hybrid materials. Concomitantly, the investigation of the “geography” of photocatalysis allowed us to underline its evolution over the years, with the repositioning of its center of mass from the Atlantic Ocean (USA and Europe) to Asia (China and India). Photocatalysis is active as never before but still awaiting major breakthroughs, which would allow a much broader technological and commercial output. Without such breakthroughs in this decade, the growth in scientific interest could level out or even decrease.

Efficient Photocatalytic Dye Degradation and Bacterial Inactivation by Graphitic Carbon Nitride and Starch-Doped Magnesium Hydroxide Nanostructures

The removal of hazardous pollutants from water is becoming an increasingly interesting topic of research considering their impact on the environment and the ecosystem. This work was carried out to synthesize graphitic carbon nitride (g-C₃N₄) and starch-doped magnesium hydroxide (g-C₃N₄/St-Mg(OH)₂) nanostructures via a facile co-precipitation process. The focus of this study is to treat polluted water and bactericidal behavior with a ternary system (doping-dependent Mg(OH)₂). Different concentrations (2 and 4 wt %) of g-C₃N₄ were doped in a fixed amount of starch and Mg(OH)₂ to degrade methylene blue dye from an aqueous solution with bactericidal potential against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) pathogens. The textural structures, morphological evolutions, and optical characteristics of the as-prepared samples were analyzed using advanced characterization techniques. X-ray diffraction confirmed the hexagonal phase of Mg(OH)₂ with improved crystallinity upon doping. Fourier transform infrared spectroscopy revealed Mg(OH)₂ stretching vibrations and other functional groups. UV-visible spectroscopy exhibited a red shift (bathochromic effect) in absorption spectra representing the decrease in energy band gap (E _g). Photoluminescence patterns were recorded to study recombination of charge carriers (e^- and h⁺). A significant enhancement in photodegradation efficiency (97.62%) and efficient bactericidal actions against E. coli (14.10 mm inhibition zone) and S. aureus (7.45 mm inhibition zone) were observed for higher doped specimen 4% g-C₃N₄/St-Mg(OH)_2.

Novel heterostructured metal doped MgFe2O4@g-C3N4 nanocomposites with superior photo-Fenton preformance for antibiotics removal: One-step synthesis and synergistic mechanism

A novel metal doped MgFe₂O₄@g-C₃N₄ (m-MF@CN) nanocomposite was synthesized by one-pot method using saprolite laterite nickel ore and urea as raw materials. The heterostructure was verified as an effective heterogeneous Fenton-like catalyst for degrading antibiotics including tetracycline, oxytetracycline and chlortetracycline hydrochloride, and the related catalytic mechanism was elaborated in detail. Under the optimum conditions, the m-MF@CN/H₂O₂/vis system exhibited superior photo-Fenton property (degradation efficiency of 93.15% within 30 min, TOC removal efficiency was as high as 60.54% within 120 min) and cycle stability for tetracycline removal. The combination of MgFe₂O₄ and g-C₃N₄ enhanced the absorption of visible light, and the energy level matched heterojunction promoted the separation of photogenerated electron-holes to accelerate the redox cycle of ≡Fe³⁺/≡Fe²⁺. Free radical quenching and electron spin resonance (ESR) analysis confirmed that O₂^- was the main active species, h⁺ and OH also played a synergistic role in the degrading reactions. Notably, a possible degradation pathway of tetracycline was proposed according to the intermediates produced in the reaction process. The one-step synthesized m-MF@CN nanocomposite catalysts possessed high catalytic performance, good stability and recoverability, which not only realized the high-value utilization of ore raw materials, but also provided a potential practical way for efficient treatment of antibiotic wastewater.

Graphitic carbon nitride (g-C3N4)-based photocatalytic materials for hydrogen evolution

The semiconductors, such as TiO₂, CdS, ZnO, BiVO₄, graphene, produce good applications in photocatalytic water splitting for hydrogen production, and great progress have been made in the synthesis and modification of the materials. As a two-dimensional layered structure material, graphitic carbon nitride (g-C₃N₄), with the unique properties of high thermostability and chemical inertness, excellent semiconductive ability, affords good potential in photocatalytic hydrogen evolution. However, the related low efficiency of g-C₃N₄ with fast recombination rate of photogenerated charge carriers, limited visible-light absorption, and low surface area of prepared bulk g-C₃N₄, has called out the challenge issues to synthesize and modify novel g-C₃N₄-block photocatalyst. In this review, we have summarized several strategies to improve the photocatalytic performance of pristine g-C₃N₄ such as pH, morphology control, doping with metal or non-metal elements, metal deposition, constructing a heterojunction or homojunction, dye-sensitization, and so forth. The performances for photocatalytic hydrogen evolution and possible development of g-C₃N₄ materials are shared with the researchers interested in the relevant fields hereinto.

Synthesis and microwave absorption studies on 2D graphitic carbon nitride loaded polyaniline/polyvinyl alcohol nanocomposites

A light weight electromagnetic interference (EMI) shielding and microwave absorbing composite films has been developed by loading varying weight content of graphitic carbon nitride (g-C3N4) nanosheets and polyaniline (PANI) into polyvinyl alcohol (PVA) matrix. The prepared PVA/PANI/g-C3N4 (1%, 3%, 5%) composites has been subjected to FTIR, X-Ray powder diffraction, SEM, Thermal studies, Dielectric studies and electromagnetic shielding effectiveness (EMI SE) analysis. The PVA/PANI/g-C3N4 (1%, 3%, 5%) composites was discovered to have improved electrical conductivity, dielectric loss, and dielectric constant. It is observed from the SEM images that the sheet layers of g-C3N4 are wrapped by the polymer matrix and the morphology to PVA/PANI composite in the g-C3N4 indicates homogeneous blending of PVA/PANI without any phase separation and has porous in it. The PANI/g-C3N4 fractured surfaces present are smooth but irregular in appearance indicating good compatibility between the PVA and PANI matrices. The dielectric properties was found to increase on increasing the concentration of the g-C3N4 nanofiller and reached a maximum of 9.8 × 106 at 1 MHz for 3% g-C3N4 in PVA/PANI. The incorporation of g-C3N4 into PVA/PANI enhanced the conductivity and the 5% g-C3N4 loaded composite film exhibited a conductivity value of 0.043 S/cm at 1 MHz. The PVA/PANI/g-C3N4 (1%, 3%, 5%) composites exhibited potential EMI SE values ranging from 24 to 35 dB at 8.6 GHz and from 42 to 63 dB at 12.4 GHz, for instance the PVA/PANI/g-C3N4 5% composite showed highest value of 63 dB at 12.4 GHz. The PVA/PANI/g-C3N4 5% exhibits the maximum highest reflection loss 8 GHz–12 GHz in which the higher absorption of −36 dB is observed at 10.3 GHz of the X-band region.

A non-enzymatic photoelectrochemical sensor based on g-C3N4@CNT heterojunction for sensitive detection of antioxidant gallic acid in food

Gallic acid (GA) is found in a wide range of natural plants and is relevant to the health of human beings. Here, a photoelectrochemical sensing platform based on g-C₃N₄@CNT heterojunction has been prepared for the highly sensitive and selective detection of GA. Under the light of xenon lamp, the photocurrent of g-C₃N₄@CNT is 7 times higher than that of g-C₃N₄. And the sensor generates 4 times more photocurrent in the presence of GA than without GA. This sensor has a wide linear range from 10 nM to 10 μM with a limit of detection as low as 2 nM. Also, the abundant amino groups of g-C₃N₄ provide excellent selectivity for the sensor. Furthermore, the sensor can be used for the analysis of GA in black tea samples, which provides a novel and rapid method for the detection of GA in food samples.