Review on ion mobility spectrometry. Part 2: hyphenated methods and effects of experimental parameters

Analytical characterization of anthocyanins using trapped ion mobility spectrometry-quadrupole time-of-flight tandem mass spectrometry

Anthocyanin profiles of juices from blueberry (Vaccinium myrtillus L.) and different grape varieties (Vitis labrusca L. cv. Concord, Vitis vinifera L. cvs. Accent, Dunkelfelder, Dakapo, and GM 674-1) were characterized by ultra-high performance liquid chromatography (UHPLC) coupled to trapped ion mobility spectrometry-quadrupole time-of-flight tandem mass spectrometry (TIMS-QTOF-MS/MS). Ion mobility and collision cross section (CCS) values of over 50 structurally related anthocyanins based on delphinidin, cyanidin, petunidin, peonidin, and malvidin were determined. Relations between molecular mass, mobility values, and specific structural features were revealed. The mass-to-charge (m/z) ratio of the molecular ions (M+) was found to be the major factor influencing anthocyanin ion mobilities, but structural characteristics also contributed to their variability. We were able to differentiate positional and geometrical isomers and certain epimers by their respective mobility values. For instance, whereas 3-O-hexosides (i.e., 3-O-glucosides and 3-O-galactosides) were separated by TIMS, epimers of 3-O-pentosides assessed could not be distinguished.

A stepwise surface ionization method for ion mobility spectrometry

RATIONALE

The detection of organic nitrogen compounds in exhaled breath is expected to provide an early warning of diseases such as kidney disease. Detecting these trace disease markers in exhaled breath with complex composition and high moisture content is a challenge. Surface ionization (SI) shows a highly selective ionization of organic nitrogen compounds, and it is a good candidate for breath analysis combined with ion mobility spectrometry (IMS).

METHODS

A stepwise SI method of low-temperature adsorption/high-temperature ionization was proposed, and trimethylamine (TMA) was detected when combined with an ion mobility spectrometer. TMA at different concentrations and humidity levels and spiked in human breath was detected to evaluate the method's properties.

RESULTS

TMA with concentrations from 2 to 200 ppb was detected. The peak intensity of the TMA characteristic ions was linearly related to the "e" exponent of the concentration with a curve fit of 0.996. A standard deviation of less than 0.306% was obtained with 10 replicate analyses of 10 ppb TMA. The signal intensity difference between dry and wet (relative humidity > 93%) TMA samples is only 2.7%, and the recovery rate of the sample was 106.819%.

CONCLUSIONS

SI-IMS based on the stepwise SI method has the advantages of low ionization temperature, high detection sensitivity, strong resistance to humidity interference, and good repeatability. It is a promising method for detecting organic nitrogen compounds in exhaled breath.

Simulation study of a new racetrack FAIMS analyzer to achieve both high-resolution and high-sensitivity

A new racetrack field-asymmetric waveform ion mobility spectrometry (r-FAIMS) analyzer was developed in this study by combining the existing planar FAIMS (p-FAIMS) and cylindrical FAIMS (c-FAIMS). The ion inlet and outlet regions of r-FAIMS were consisted of a half of c-FAIMS, respectively, and these c-FAIMS were further connected by two p-FAIMS to form a racetrack shaped FAIMS. With such FAIMS working electrode configuration, the ions entering the r-FAIMS can be focused and separated in the first c-FAIMS section, be further separated in the p-FAIMS section with high-resolution, be focused and separated again in the final c-FAIMS section and eventually enter the mass spectrometer or other analyzers for analysis. Detailed simulation by using SIMION software with the default FAIMS user program showed that the ion focusing effect in the first c-FAIMS section ensures the ions entering the following p-FAIMS section as a compact ion packet. This effectively decreases the ion loss caused by Coulomb repulsion and thermal diffusion in p-FAIMS section as compared to the ions being introduced into the p-FAIMS gap randomly in the conventional design. As a result, the ion transmission efficiency of r-FAIMS is at least 3.3-fold higher than the single p-FAIMS under the operating conditions used in this study. The ion trajectory simulation results also showed that the resolving power of r-FAIMS is about the sum of the resolving powers for its c-FAIMS and p-FAIMS sections. The resolving power of r-FAIMS is at least 3.6-fold higher than the single c-FAIMS under the operation conditions used in this study. Therefore, the r-FAIMS can realize both high-resolution and high-sensitive ion mobility separation.

Advances of Ion Mobility Platform for Plant Metabolomics

Metabolomics aims to profile the extensive array of metabolites that exists in different types of matrices using modern analytical techniques. These techniques help to separate, identify, and quantify the plethora of chemical compounds at various analytical platforms. Hence, ion mobility spectrometry (IMS) has emerged as an advanced analytical approach, exclusively owing to the 3D separation of metabolites and their isomers. Furthermore, separated metabolites are identified based on their mass fragmentation pattern and CCS (collision cross-section) values. The IMS provides an advanced alternative dimension to separate the isomeric metabolites with enhanced throughput with lesser chemical noise. Thus, the present review highlights the types, factors affecting the resolution, and applications of IMMS (Ion mobility mass spectrometry) for isomeric separations, and ionic contaminants in the plant samples. Furthermore, an overview of IMS-based applications for the identification of plant metabolites (volatile and non-volatile) over the last few decades has been discussed, followed by future assumptions for creating IM-based databases. Such approaches could be significant to accelerate and improve our knowledge of the vast chemical diversity found in plants.

Atmospheric pressure field desorption-trapped ion mobility-mass spectrometry coupling

While field ionization (FI) and field desorption (FD) are established soft vacuum ionization methods in mass spectrometry (MS), the technique of atmospheric pressure field desorption (APFD) has only recently been added to the repertoire. Similar to FI and FD, APFD can yield both positive even-electron ions of highly polar or ionic compounds and positive molecular ions, M+•, e.g., of polycyclic aromatic compounds. Thus, a dedicated APFD source assembly has been constructed and demonstrated to allow for robust APFD operation. This device also enabled observation of the emitter during operation and allowed for resistive emitter heating, thereby speeding up the desorption of the analytes and expanding the range of analytes accessible to APFD. While initial work was done using a Fourier transform-ion cyclotron resonance (FT-ICR) mass spectrometer, the new APFD source offered the flexibility to also be used on a trapped ion mobility-quadrupole-time-of-flight (TIMS-Q-TOF) instrument, and thus, it would be possible to be mounted to any Bruker mass spectrometer featuring an atmospheric pressure (AP) interface. Operating an APFD source at a TIMS-Q-TOF instrument called for the exploration of the combined use of APFD and TIMS. Here, operation, basic properties, and capabilities of this new atmospheric pressure field desorption-trapped ion mobility-mass spectrometry (APFD-TIMS-MS) coupling are described. APFD-TIMS-MS is employed for the separation of individual components of oligomers and for the accurate determination of their collision cross section (CCS). This work describes the application of APFD-TIMS-MS on poly(ethylene glycol) forming [M + Na]+ ions by cationization and on an amine-terminated poly(propylene glycol) yielding [M + H]+ ions. Some compounds forming molecular ions, M+•, by field ionization such as [60]fullerene and a mixture of four polycyclic aromatic hydrocarbons (PAHs) are examined. In APFD-TIMS-MS, the limits of detection (LODs) of fluoranthene and benzo[a]pyrene M+• ions are determined as ≈100 pg and <1 pg, respectively. Finally, [60]fullerene is analyzed by negative-ion APFD-TIMS-MS where it yields a molecular anion, M-•.

Radial basis function neural network optimization algorithm based on dynamic inertial weight particle swarm optimization for separating overlapping peaks in ion mobility spectrometry

RATIONALE

Ion mobility spectrometry (IMS), as a promising analytical tool, has been widely employed in the structural characterization of biomolecules. Nevertheless, the inherent limitation in the structural resolution of IMS frequently results in peak overlap during the analysis of isomers exhibiting comparable structures.

METHODS

The radial basis function (RBF) neural network optimization algorithm based on dynamic inertial weight particle swarm optimization (DIWPSO) was proposed for separating overlapping peaks in IMS. The RBF network structure and parameters were optimized using the DIWPSO algorithm. By extensively training using a large dataset, an adaptive model was developed to effectively separate overlapping peaks in IMS data. This approach successfully overcomes issues related to local optima, ensuring efficient and precise separation of overlapping peaks.

RESULTS

The method's performance was evaluated using experimental validation and analysis of overlapping peaks in the IMS spectra of two sets of isomers: 3'/6'-sialyllactose; fructose-6-phosphate, glucose-1-phosphate, and glucose-6-phosphate. A comparative analysis was conducted using other algorithms, including the sparrow search algorithm, DIWPSO algorithm, and multi-objective dynamic teaching-learning-based optimization algorithm. The comparison results show that the DIWPSO-RBF algorithm achieved remarkably low maximum relative errors of only 0.42%, 0.092%, and 0.41% for ion height, mobility, and half peak width, respectively. These error rates are significantly lower than those obtained using the other three algorithms.

CONCLUSIONS

The experimental results convincingly demonstrate that this method can adaptively, rapidly, and accurately separate overlapping peaks of multiple components, improving the structural resolution of IMS.

Untargeted 4D-metabolomics using Trapped Ion Mobility combined with LC-HRMS in extra virgin olive oil adulteration study with lower-quality olive oils

Metabolomics is widely established in the field of food authenticity to address demanding issues, such as adulteration cases. Trapped ion mobility spectrometry (TIMS) coupled to liquid chromatography (LC) and high-resolution mass spectrometry (HRMS) provides an additional analytical dimension, introducing mobility-enhanced metabolomics in four dimensions (4D). In the present work, the potential of LC-TIMS-HRMS as a reliable analytical platform for authenticity studies is being explored, applied in extra virgin olive oil (EVOO) adulteration study. An integrated untargeted 4D-metabolomics approach is being implemented to investigate adulteration, with refined olive oils (ROOs) and olive pomace oils (OPOs) set as adulterants. Robust prediction models are built, successfully discriminating authentic EVOOs from adulterated ones and highlighting markers in each group. Noteworthy outcomes are retrieved regarding TIMS added value in LC-HRMS workflows, resulting in a significant increase of metabolic coverage, while, thanks to platform's enhanced sensitivity, detection of adulteration is being achieved down to 1%.

A novel coupling technique based on thermal desorption gas chromatography with mass spectrometry and ion mobility spectrometry for breath analysis

Exhaled breath analysis is evolving into an increasingly important non-invasive diagnostic tool. Volatile organic compounds (VOCs) in breath contain information about health status and are promising biomarkers for several diseases, including respiratory infections caused by bacteria. To monitor the composition of VOCs in breath or the emission of VOCs from bacteria, sensitive analytical techniques are required. Next to mass spectrometry, ion mobility spectrometry (IMS) is considered a promising analytical tool for detecting gaseous analytes in the parts per billion by volume to parts per trillion by volume range. This work presents a new, dual coupling of thermal desorption gas chromatography to a quadrupole mass spectrometer (MS) and an IMS by operating a simple splitter. Nearly identical retention times can be reached in the range of up to 30 min with slight deviations of 0.06 min-0.24 min. This enables the identification of unknown compounds in the IMS chromatogram using unambiguous mass spectral identification, as there are still no commercially available databases for IMS. It is also possible to discriminate one of the detectors using the splitter to improve detection limits. Using a test liquid mixture of seven ketones, namely 2-butanone, 2-pentanone, 2-hexanone, 2-heptanone, 2-octanone, 2-nonanone, and 2-decanone with a concentration of 0.01 g l-1reproducibilities ranging from 3.0% to 7.6% for MS and 2.2%-5.3%, for IMS were obtained, respectively. In order to test the system optimized here for the field of breath analysis, characteristic VOCs such as ethanol, isoprene, acetone, 2-propanol, and 1-propanol were successfully identified in exhaled air using the dual detector system due to the match of the corresponding IMS, and MS spectra. The presented results may be considered to be a starting point for the greater use of IMS in combination with MS within the medical field.

Overlapping peak separation algorithm for ion mobility spectra based on multistrategy JAYA

RATIONALE

In the field of separation science, ion mobility spectrometry (IMS) plays an important role as an analytical tool. However, the lack of sufficient structural resolution is a common problem in qualitative and quantitative analysis using IMS. A method is needed to solve the problem of overlapping peaks caused by insufficient resolution.

METHODS

The method uses multiple strategies to more effectively use population information to balance exploration and exploitation capabilities, prevent local optimization, accurately resolve overlapping peaks, quickly obtain optimal spectral peak model coefficients, and accurately identify compounds.

RESULTS

Multistrategy JAYA algorithm's (MSJAYA) performance is compared with improved particle swarm optimization (IPSO), dynamic inertia weight particle swarm optimization (DIWPSO), and multiobjective dynamic teaching-learning-based optimization (MDTLBO). The analysis shows that MSJAYA's maximum separation error is within 0.6%, a level of accuracy not guaranteed by the other algorithms. In addition, the separation error fluctuates within a much smaller range, demonstrating MSJAYA's superior robustness.

CONCLUSIONS

Compared with other overlapping peak separation algorithms, MSJAYA is more applicable because no special parameters are used. The method allows fast deconvolution analysis of strong overlapping peaks with multiple components, which greatly improves the resolution of IMS.

Rapid point-of-care detection of SARS-CoV-2 infection in exhaled breath using ion mobility spectrometry: a pilot study

BACKGROUND

An effective testing strategy is essential for pandemic control of the novel Coronavirus disease 2019 (COVID-19) caused by infection with severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). Breath gas analysis can expand the available toolbox for diagnostic tests by using a rapid, cost-beneficial, high-throughput point-of-care test. We conducted a bi-center clinical pilot study in Germany to evaluate breath gas analysis using multi-capillary column ion mobility spectrometry (MCC-IMS) to detect SARS-CoV-2 infection.

METHODS

Between September 23, 2020, and June 11, 2021, breath gas measurements were performed on 380 patients (SARS-CoV-2 real-time polymerase chain reaction (PCR) positive: 186; PCR negative: 194) presenting to the emergency department (ED) with respiratory symptoms.

RESULTS

Breath gas analysis using MCC-IMS identified 110 peaks; 54 showed statistically significant differences in peak intensity between the SARS-CoV-2 PCR-negative and PCR-positive groups. A decision tree analysis classification resulted in a sensitivity of 83% and specificity of 86%, but limited robustness to dataset changes. Modest values for the sensitivity (74%) and specificity (52%) were obtained using linear discriminant analysis. A systematic search for peaks led to a sensitivity of 77% and specificity of 67%; however, validation by transferability to other data is questionable.

CONCLUSIONS

Despite identifying several peaks by MCC-IMS with significant differences in peak intensity between PCR-negative and PCR-positive samples, finding a classification system that allows reliable differentiation between the two groups proved to be difficult. However, with some modifications to the setup, breath gas analysis using MCC-IMS may be a useful diagnostic toolbox for SARS-CoV-2 infection.

TRIAL REGISTRATION

This study was registered at ClinicalTrials.gov on September 21, 2020 (NCT04556318; Study-ID: HC-N-H-2004).

Simultaneous Ion Swarm Profiling and Ion Mobility Measurement using Ion Cameras

When operated as a standalone analytical device, traditional drift tube ion mobility spectrometry (IMS) experiments require high-speed, high-gain transimpedance amplifiers to record ion separations with sufficient resolution. Recent developments in the fabrication of charge-sensitive cameras (e.g., IonCCD) have provided key insights for ion beam profiling in mass spectrometry and even served as detectors for miniature magnetic sector instruments. Unfortunately, these platforms have comparatively slow integration times (multiple ms), which largely precludes their use for recording ion mobility spectra, where sampling rates into the 10s of kHz are generally required. As a result, experiments that simultaneously probe the longitudinal and transverse mobility of an injected species using an array detector have not been reported. To address this duty-cycle mismatch, a frequency encoding strategy is used to evaluate ion swarm characteristics, while directly capturing ion mobility information using the Fourier transform. This apparatus described allows the ion beam to be profiled over the full course of the experiment and establishes the foundation to examine axial and longitudinal drift velocities simultaneously.

Evaluation of fentanyl immunoassay test strips for rapid in-situ detection of fentanyl and fentanyl analogs in seized samples and alternative matrices

BACKGROUND

Ion mobility spectrometry is used for the rapid detection of drugs at points of security but are unable to differentiate some drugs leading to the instrument alarming for a drug not present in the sample. This can be particularly problematic for samples that alarm for fentanyl. In this study, fentanyl immunoassay strips were evaluated for use as a secondary test for fentanyl, including for the testing of alternative matrices, such as powders, e-liquids, and infused papers and textiles.

METHODS

The limit of detection of fentanyl immunoassay strips was examined along with their selectivity to 18 fentanyl analogsand 72 other drugs and cutting agents. The effectiveness of the test strips at the detection of fentanyl in the presence of other drugs was examined by testing a series of concentrations of fentanyl in solution in combination with other drugs. The testing of alternative matrices was explored with laboratory prepared samples through sampling with cotton buds and extraction in water.

RESULTS

The fentanyl immunoassay strips detected fentanyl at concentrations of 45 ng/mL and reacted with 16 of 18 tested fentanyl analogs with carfentanil and norfentanyl being the only analogs to not react. There was no reactivity with other drugs or cutting agents. The effectiveness of the fentanyl test strips was not reduced when fentanyl was mixed with other drugs. Fentanyl was successfully detected with high sensitivity in all alternative matrices.

CONCLUSION

The fentanyl immunoassay strips were found to be an effective secondary test for fentanyl and at least 16 fentanyl analogs in seized drug samples, including when mixed with other drugs. The effectiveness of the sampling methods for alternative matrices should be further evaluated using fentanyl and fentanyl analog casework samples. The use of this method by law enforcement and other agencies should be examined to assess its effectiveness and ease of use in operational settings.

Chemical Transformations Can Occur during DMS Separations: Lessons Learned from Beer's Bittering Compounds

While developing a DMS-based separation method for beer's bittering compounds, we observed that the argentinated forms of humulone tautomers (i.e., [Hum + Ag]⁺) were partially resolvable in a N₂ environment seeded with 1.5 mol % of isopropyl alcohol (IPA). Attempting to improve the separation by introducing resolving gas unexpectedly caused the peaks for the cis-keto and trans-keto tautomers of [Hum + Ag]⁺ to coalesce. To understand why resolution loss occurred, we first confirmed that each of the tautomeric forms (i.e., dienol, cis-keto, and trans-keto) responsible for the three peaks in the [Hum + Ag]⁺ ionogram were assigned to the correct species by employing collision-induced dissociation, UV photodissociation spectroscopy, and hydrogen-deuterium exchange (HDX). The observation of HDX indicated that proton transfer was stimulated by dynamic clustering processes between IPA and [Hum + Ag]⁺ during DMS transit. Because IPA accretion preferentially occurs at Ag⁺, which can form pseudocovalent bonds with a suitable electron donor, solvent clustering also facilitated the formation of exceptionally stable microsolvated ions. The exceptional stability of these microsolvated configurations disproportionately impacted the compensation voltage (CV) required to elute each tautomer when the temperature within the DMS cell was varied. The disparity in CV response caused the peaks for the cis- and trans-keto species to merge when a temperature gradient was induced by the resolving gas. Moreover, simulations showed that microsolvation with IPA mediates dienol to trans-keto tautomerization during DMS transit, which, to the best of our knowledge, is the first observation of keto/enol tautomerization occurring within an ion-mobility device.

Argentination: A Silver Bullet for Cannabinoid Separation by Differential Mobility Spectrometry

As the legality of cannabis continues to evolve globally, there is a growing demand for methods that can accurately quantitate cannabinoids found in commercial products. However, the isobaric nature of many cannabinoids, along with variations in extraction methods and product formulations, makes cannabinoid quantitation by mass spectrometry (MS) challenging. Here, we demonstrate that differential mobility spectrometry (DMS) and tandem-MS can distinguish a set of seven cannabinoids, five of which are isobaric: Δ⁹-tetrahydrocannabinol (Δ⁹-THC), Δ⁸-THC, exo-THC, cannabidiol, cannabichromene, cannabinol, and cannabigerol. Analytes were detected as argentinated species ([M + Ag]⁺), which, when subjected to collision-induced dissociation, led to the unexpected discovery that argentination promotes distinct fragmentation patterns for each cannabinoid. The unique fragment ions formed were rationalized by discerning fragmentation mechanisms that follow each cannabinoid's MS³ behavior. The differing fragmentation behaviors between species suggest that argentination can distinguish cannabinoids by tandem-MS, although not quantitatively as some cannabinoids produce small amounts of a fragment ion that is isobaric with the major fragment generated by another cannabinoid. By adding DMS to the tandem-MS workflow, it becomes possible to resolve each cannabinoid in a pure N₂ environment by deconvoluting the contribution of each cannabinoid to a specific fragmentation channel. To this end, we used DMS in conjunction with a multiple reaction monitoring workflow to assess cannabinoid levels in two cannabis extracts. Our methodology exhibited excellent accuracy, limits of detection (10-20 ppb depending on the cannabinoid), and linearity during quantitation by standard addition (R² > 0.99).

Evaluation of IMS drift tube temperature on the peak shape of high boiling fragrance compounds towards allergen detection in complex cosmetic products and essential oils

Gas chromatography-ion mobility spectrometry (GC-IMS) has recently gained increasing attention for the analysis of volatile compounds due to its high sensitivity, selectivity, and robust design. Peak shape distortion, including peak tailing or broadening, are well known challenges in chromatographic analysis that result in peak asymmetry and decreased resolution. However, in IMS analysis peak tailing, which is independent on the column separation technique, have also been observed. As high boiling substances, such as monoterpenes, are mainly affected by enlarged peak tailing in GC-IMS, we propose that condensation or adsorption effects within the "cold" IMS cell, which is commonly operated at 45 °C-90 °C, are the root cause. To avoid condensation and to decrease peak tailing, we used a prototypic high temperature ion mobility spectrometry (HTIMS) in this work, which allows an increase of the IMS drift tube temperature up to 180 °C. This HTIMS was coupled to a GC column separation and used to analyse the peak shape of homologues series of ketones, alcohols, aldehydes, as well as high boiling fragrance compounds, such as monoterpenes and phenylpropanoids. While we were able to show that an increased IMS drift tube temperatures correlates well with improved peak shapes, the GC parameters of the HS-GC-HTIMS method, however, were found to have little effect on the peak shapes in IMS spectra. In particular monoterpenes, which display intense peak tailing at lower IMS drift tube temperatures, show significant improvement of the peak shape at higher IMS drift tube temperatures. This leads to the assumption that high boiling substances indeed undergo condensation effects within the IMS cell at low drift tube temperatures. For many separation tasks, such as the separation of the phenylpropanoids eugenol and isoeugenol, comparably low IMS temperatures of 120 °C are already sufficient to achieve a resolution above 1.5. However, the optimal drift tube temperature is dependent on the substance class. While the aspect ratio increases steadily for most monoterpenes, phenylpropanoids and aldehyde monomer peaks investigated, an optimal aspect ratio was found for ketones between 140 °C and 160 °C and alcohols between 120 °C and 140 °C. Lastly, the change of the reduced mobility K₀ with the increase of drift tube temperature was analysed. Compounds with similar chemical structure, such as the alcoholic monoterpenes citronellol and geraniol or the phenylpropanoids eugenol and isoeugenol show similar shifts of the K₀ value. Substances which differ in their chemical structure, such as the aldehyde monoterpenes citral and cinnamal have substantially different shifts of the K₀ value. With a future large substance database, the temperature dependant slope of the K₀ value of a substance could be used to identify the substance groups of unknown molecules. Furthermore, substances with the same drift time but different chemical composition could be separable through a change in drift tube temperature.

Ion storage biases in the ion funnel trap of a Hybrid ion mobility spectrometer/time of flight mass spectrometer

A detailed experimental characterization on the ion storage biases in an ion funnel trap, related to ion structure, charge state and RF voltage applied to the ion funnel trap, is reported by using both cytochrome C and ubiquitin samples. It was first observed experimentally that an unavoidable ion overflow would occur when the incoming ions exceeded the capacity of ion funnel trap. The conformers with extended structures would lose preferentially in the ion overflow process. Accordingly, a significant structural bias in the ion mobility spectrometry/time of flight mass spectrometry (IMS-TOF MS) spectrum was created, as the peak intensities for conformers with compact structures and extended structures would continuously increase and decrease, respectively, when the ion overflow time of the ion funnel trap was increased. Furthermore, the experimental results also showed that the effect of this ion structural bias was more significant when the RF voltage applied to the ion funnel trap was increased. In addition, an ion charge state bias in the ion funnel trap was also observed. The effect of the ion structural bias depends significantly on the specific charge state of the ions. For a given analyte, its lower charge state ions show a greater sensitivity to the ion structural bias than the higher charge state ones under the same ion funnel trap operating conditions. Therefore, it is extremely important to set a reasonable operation condition for the ion funnel trap to avoid ion storage biases in IMS-TOF MS.

Antibiotic Resistance Diagnosis in ESKAPE Pathogens-A Review on Proteomic Perspective

Antibiotic resistance has emerged as an imminent pandemic. Rapid diagnostic assays distinguish bacterial infections from other diseases and aid antimicrobial stewardship, therapy optimization, and epidemiological surveillance. Traditional methods typically have longer turn-around times for definitive results. On the other hand, proteomic studies have progressed constantly and improved both in qualitative and quantitative analysis. With a wide range of data sets made available in the public domain, the ability to interpret the data has considerably reduced the error rates. This review gives an insight on state-of-the-art proteomic techniques in diagnosing antibiotic resistance in ESKAPE pathogens with a future outlook for evading the "imminent pandemic".

Developments in Trapped Ion Mobility Mass Spectrometry to Probe the Early Stages of Peptide Aggregation

Ion mobility mass spectrometry (IM-MS) has proven to be an excellent method to characterize the structure of amyloidogenic protein and peptide aggregates, which are formed in coincidence with the development of neurodegenerative diseases. However, it remains a challenge to obtain detailed structural information on all conformational intermediates, originating from the early onset of those pathologies, due to their complex and heterogeneous environment. One way to enhance the insights and the identification of these early stage oligomers is by employing high resolution ion mobility mass spectrometry experiments. This would allow us to enhance the mobility separation and MS characterization. Trapped ion mobility spectrometry (TIMS) is an ion mobility technique known for its inherently high resolution and has successfully been applied to the analysis of protein conformations among others. To obtain conformational information on fragile peptide aggregates, the instrumental parameters of the TIMS-Quadrupole-Time-of-Flight mass spectrometer (TIMS-qToF-MS) have to be optimized to allow the study of intact aggregates and ensure their transmission toward the detector. Here, we investigate the suitability and application of TIMS to probe the aggregation process, targeting the well-characterized M307-N319 peptide segment of the TDP-43 protein, which is involved in the development of amyotrophic lateral sclerosis. By studying the influence of key parameters over the full mass spectrometer, such as source temperature, applied voltages or RFs among others, we demonstrate that by using an optimized instrumental method TIMS can be used to probe peptide aggregation.

Analytical separation techniques: toward achieving atomic precision in nanomaterials science

The size- and shape-dependence of the properties are the most characteristic features of nanoscale matter. In many types of nanomaterials, there is a size regime wherein every atom counts. In order to fully realize the idea of 'maneuvering things atom by atom' envisioned by Richard Feynman, synthesis and separation of nanoscale matter with atomic precision are essential. It is therefore not surprising that analytical separation techniques have contributed tremendously toward understanding the size- as well as shape-dependent properties of nanomaterials. Fascinating properties of nanomaterials would not have been explored without the use of these techniques. Here we discuss the pivotal role of analytical separation techniques in the progress of nanomaterials science. We begin with a brief overview of some of the key analytical separation techniques that are of tremendous importance in nanomaterials research. Then we describe how each of these techniques has contributed to the advancements in nanomaterials science taking some of the nanosystems as examples. We discuss the limitations and challenges of these techniques and future perspectives.

The hitchhiker's guide to dynamic ion-solvent clustering: applications in differential ion mobility spectrometry

This article highlights the fundamentals of ion-solvent clustering processes that are pertinent to understanding an ion's behaviour during differential mobility spectrometry (DMS) experiments. We contrast DMS with static-field ion mobility, where separation is affected by mobility differences under the high-field and low-field conditions of an asymmetric oscillating electric field. Although commonly used in mass spectrometric (MS) workflows to enhance signal-to-noise ratios and remove isobaric contaminants, the chemistry and physics that underpins the phenomenon of differential mobility has yet to be fully fleshed out. Moreover, we are just now making progress towards understanding how the DMS separation waveform creates a dynamic clustering environment when the carrier gas is seeded with the vapour of a volatile solvent molecule (e.g., methanol). Interestingly, one can correlate the dynamic clustering behaviour observed in DMS experiments with gas-phase and solution-phase molecular properties such as hydrophobicity, acidity, and solubility. However, to create a generalized, global model for property determination using DMS data one must employ machine learning. In this article, we provide a first-principles description of differential ion mobility in a dynamic clustering environment. We then discuss the correlation between dynamic clustering propensity and analyte physicochemical properties and demonstrate that analytes exhibiting similar ion-solvent interactions (e.g., charge-dipole) follow well-defined trends with respect to DMS clustering behaviour. Finally, we describe how supervised machine learning can be used to create predictive models of molecular properties using DMS data. We additionally highlight open questions in the field and provide our perspective on future directions that can be explored.

Two-Dimensional FAIMS-IMS Characterization of Peptide Conformers with Resolution Exceeding 1000

A high-performance field asymmetric waveform ion mobility spectrometry (FAIMS)-IMS-MS platform was developed and applied to explore the conformational diversity of the singly and doubly charged bradykinin (BK + H⁺)⁺ and (BK + 2H⁺)²⁺ ions. With pure N₂ as the FAIMS carrier gas, more than ten conformers of (BK + H⁺)⁺ can be resolved using FAIMS-IMS, as compared to only four conformers resolved using either FAIMS or IMS alone. Interestingly, multiple conformers of (BK + H⁺)⁺ were found to have completely different values of FAIMS compensation voltage (CV), while their IMS drift times were essentially the same, which were also proven experimentally to not result from the structural annealing by the collisional heating in the ion funnel. The separations in the FAIMS and IMS dimensions are substantially orthogonal, and the overall resolving power of two-dimensional FAIMS-IMS separation is largely proportional to the product of the separation resolving powers of FAIMS and IMS. Using a gas mixture of N₂/He to further improve the resolving power of the FAIMS separation, the total resolving powers of the combined FAIMS and IMS separation were estimated to be about 1020 and 1400 for (BK + H⁺)⁺ and (BK + 2H⁺)²⁺ ions, respectively, which are significantly higher than the resolving power of any ion mobility-based separation techniques demonstrated so far. The combined FAIMS-IMS can thus be a much more powerful technique to explore the structural diversity of biomolecules.

Screening apo-SOD1 conformation stabilizers from natural flavanones using native ion mobility mass spectrometry and fluorescence spectroscopy methods

RATIONALE

A large number of studies have shown that the production of aberrant and deleterious copper zinc superoxide dismutase (SOD1) species is closely related to amyotrophic lateral sclerosis (ALS). Therefore, it is of great significance to screen effective inhibitors of misfolding and aggregation of SOD1 for treating ALS disease.

METHODS

The interaction between flavanone compounds with apo-SOD1was investigated using native electrospray ion mobility mass spectrometry (native ESI-IM-MS). Binding affinities of ligands were compared using native MS, ESI-MS/MS, collision-induced unfolding, and competitive experiments. The effect of ligands on apo-SOD1 aggregation was investigated using the fluorescence spectroscopy method.

RESULTS

The results of MS showed that the binding affinity of liquiritin apioside was the strongest, better than the corresponding monosaccharide and aglycone, indicating that the presence and the number of glycosyl group are beneficial to enhance ligand affinity to protein. The results of fluorescence spectroscopy for inhibiting protein aggregation in vitro were consistent with the binding affinity. In addition, the results of the collision-induced unfolding indicated that liquiritin apioside can slow down the unfolding of the protein. Meanwhile, the results of competition experiment suggested that liquiritin apiosides share different binding sites with naringin and 5-fluorouridine, which are significant for the structural stability of SOD1.

CONCLUSIONS

This study revealed that the binding of liquiritin apioside can stabilize apo-SOD1 dimer and inhibit the aggregation of apo-SOD1, and illustrated that native ESI-IM-MS is a powerful tool for providing insight into investigating the structure-activity relationship between small molecules and protein, and screening protein conformation stabilizers.

Volatilomics-Based Microbiome Evaluation of Fermented Dairy by Prototypic Headspace-Gas Chromatography–High-Temperature Ion Mobility Spectrometry (HS-GC-HTIMS) and Non-Negative Matrix Factorization (NNMF)

Fermented foods, such as yogurt and kefir, contain a versatile spectrum of volatile organic compounds (VOCs), including ethanol, acetic acid, ethyl acetate, and diacetyl. To overcome the challenge of overlapping peaks regarding these key compounds, the drift tube temperature was raised in a prototypic high-temperature ion mobility spectrometer (HTIMS). This HS-GC-HTIMS was used for the volatilomic profiling of 33 traditional kefir, 13 commercial kefir, and 15 commercial yogurt samples. Pattern recognition techniques, including principal component analysis (PCA) and NNMF, in combination with non-targeted screening, revealed distinct differences between traditional and commercial kefir while showing strong similarities between commercial kefir and yogurt. Classification of fermented dairy samples into commercial yogurt, commercial kefir, traditional mild kefir, and traditional tangy kefir was also possible for both PCA- and NNMF-based models, obtaining cross-validation (CV) error rates of 0% for PCA-LDA, PCA-kNN (k = 5), and NNMF-kNN (k = 5) and 3.3% for PCA-SVM and NNMF-LDA. Through back projection of NNMF loadings, characteristic substances were identified, indicating a mild flavor composition of commercial samples, with high concentrations of buttery-flavored diacetyl. In contrast, traditional kefir showed a diverse VOC profile with high amounts of flavorful alcohols (including ethanol and methyl-1-butanol), esters (including ethyl acetate and 3-methylbutyl acetate), and aldehydes. For validation of the results and deeper understanding, qPCR sequencing was used to evaluate the microbial consortia, confirming the microbial associations between commercial kefir and commercial yogurt and reinforcing the differences between traditional and commercial kefir. The diverse flavor profile of traditional kefir primarily results from the yeast consortium, while commercial kefir and yogurt is primarily, but not exclusively, produced through bacterial fermentation. The flavor profile of fermented dairy products may be used to directly evaluate the microbial consortium using HS-GC-HTIMS analysis.

An overlapping peaks separation algorithm for ion mobility spectrometry based on second-order differentiation and dynamic inertia weight particle swarm optimization algorithm

RATIONALE

Ion mobility spectrometry (IMS) is a powerful analytical tool extensively applied in numerous domains. However, there still exists the phenomenon of peaks overlapping in the analysis of isomers with similar structures due to the limited resolution of IMS. In this paper, a dynamic inertia weight particle swarm optimization (DIWPSO) algorithm combined with second-order differentiation is proposed to separate the IMS overlapping peaks efficiently and precisely.

METHODS

It can identify the component number of overlapping peaks and limit those parameters (ion mobility, intensity, and full-width at half maximum of each single peak) of the peak model in a small range using second-order differentiation. Based on this, DIWPSO that has been set the best operating parameters is capable of accurately separating IMS overlapping peaks to identify the compound within a short time.

RESULTS

A comparison between the performance of DIWPSO and the improved particle swarm optimization (IPSO) found that DIWPSO with separation errors less than 2.34% overall outperforms IPSO whose maximum error is up to 5.58%. Moreover, the running time of DIWPSO is 30-80 times less than that of IPSO, and DIWPSO exhibits stronger robustness.

CONCLUSIONS

This method can automatically identify the component number of IMS overlapping peaks and resolve them with muticomponents and different overlapped degrees rapidly and accurately, which further improves the structural resolution of IMS.

Rapid separation of cannabinoid isomer sets using differential mobility spectrometry and mass spectrometry

With legalization and decriminalization of cannabis in many parts of the world comes the need for rapid separation and quantitation of the psychoactive ingredients.

Application of zero-phase digital filtering for effective denoising of field asymmetric waveform ion mobility spectrometry signal

RATIONALE

Field asymmetric waveform ion mobility spectrometry (FAIMS) has a great potential to become a portable technology for rapid detection of chemical and biological agents. However, the ion current signals, measured at the exit of the planar FAIMS directly, may contain different types of noises. The peak information in the FAIMS spectrum, such as the compensation voltage (CV) value at the maximum peak intensity (CV_P ) and the peak width at half maximum (W_h ), could not be accurately determined under the weak signal condition, which significantly limits the achievable instrument sensitivity, and there are no existing solutions to the problem.

METHODS

This study analyzed the noise type of FAIMS signal in detail, and three different signal processing algorithms, such as median filtering (MF), discrete wavelet transform (DWT), and zero-phase digital filtering (ZDF), were evaluated for their performance in denoising the FAIMS signal.

RESULTS

The results show that the standard deviation of CV_p obtained from the signal denoised using ZDF algorithm is at least 31.82% smaller as compared to using MF and DWT algorithms. The standard deviation of W_h is at least 45.45% smaller using ZDF algorithm. Moreover, only ZDF algorithm can keep the percentage error for the CV value of the denoised signal to be within 0.50 ± 0.47% of the true CV value, implying the effectiveness of ZDF algorithm in denoising while retaining the integrity of the signal.

CONCLUSIONS

The ZDF algorithm greatly reduces the analyte peak extraction error and improves the limit of detection in FAIMS measurements.

Trapped Ion Mobility Incorporated in LC-HRMS Workflows as an Integral Analytical Platform of High Sensitivity: Targeted and Untargeted 4D-Metabolomics in Extra Virgin Olive Oil

Trapped ion mobility spectrometry (TIMS) is a promising technique for the separation of isomers based on their mobility. In the present work, TIMS coupled to liquid chromatography (LC) and high-resolution mass spectrometry (HRMS) was applied as a comprehensive analytical platform to address authenticity challenges, focusing on extra virgin olive oil (EVOO). Isomers detected in EVOO's phenolic fraction, classified into secoiridoids group, were successfully separated. Thanks to parallel accumulation serial fragmentation (PASEF) acquisition mode, high-quality spectra were obtained, facilitating identification. Moreover, a four-dimensional (4D) untargeted metabolomics approach was implemented to evaluate EVOO's global profile in cases of both variety and geographical origin discrimination. Potential authenticity markers, attributed to isomers, were successfully identified through the proposed workflow that incorporates ion mobility information along with LC-HRMS analytical evidence (i.e., mass accuracy, retention time, isotopic pattern, MS/MS fragmentation). Our study establishes LC-TIMS-HRMS in food authenticity and highlights mobility-enhanced metabolomics in four dimensions.

Improving the Speed and Selectivity of Newborn Screening Using Ion Mobility Spectrometry-Mass Spectrometry

Detection and diagnosis of congenital disorders is the principal aim of newborn screening (NBS) programs worldwide. Mass spectrometry (MS) has become the preferred primary testing method for high-throughput NBS sampling because of its speed and selectivity. However, the ever-increasing list of NBS biomarkers included in expanding panels creates unique analytical challenges for multiplexed MS assays due to isobaric/isomeric overlap and chimeric fragmentation spectra. Since isobaric and isomeric systems limit the diagnostic power of current methods and require costly follow-up exams due to many false-positive results, here, we explore the utility of ion mobility spectrometry (IMS) to enhance the accuracy of MS assays for primary (tier 1) screening. Our results suggest that ∼400 IMS resolving power would be required to confidently assess most NBS biomarkers of interest in dried blood spots (DBSs) that currently require follow-up testing. While this level of selectivity is unobtainable with most commercially available platforms, the separations detailed here for a commercially available drift tube IMS (Agilent 6560 with high-resolution demultiplexing, HRdm) illustrate the unique capabilities of IMS to separate many diagnostic NBS biomarkers from interferences. Furthermore, to address the need for increased speed of NBS analyses, we utilized an automated solid-phase extraction (SPE) system for ∼10 s sampling of simulated NBS samples prior to IMS-MS. This proof-of-concept work demonstrates the unique capabilities of SPE-IMS-MS for high-throughput sample introduction and enhanced separation capacity conducive for increasing speed and accuracy for NBS.

A Miniature Multilevel Structures for Lossless Ion Manipulations Ion Mobility Spectrometer with Wide Mobility Range Separation Capabilities

Ion mobility spectrometry employing structures for lossless ion manipulations (SLIM-IMS) is an attractive gas-phase separation technique due to its ability to achieve unprecedented effective ion path lengths (>1 km) and IMS resolving powers in a small footprint. The emergence of multilevel SLIM technology, where ions are transferred between vertically stacked SLIM electrode surfaces, has subsequently allowed for ultralong single-pass path lengths (>40 m) to be achieved, enabling ultrahigh resolution IMS measurements to be performed over the entire mobility range in a single experiment. Here, we report on the development of a 1 m path length miniature SLIM module (miniSLIM) based on multilevel SLIM technology. Ion trajectory simulations were used to optimize SLIM board spacings and SLIM board thicknesses, and a new method of efficiently transferring ions between SLIM levels using asymmetric traveling waves (TWs) was demonstrated. We experimentally characterized the performance of the miniSLIM IMS-MS relative to a drift tube IMS-MS using Agilent tuning mixture cations and tetraalkylammonium cations. The miniSLIM achieved a resolving power of up to 131 (CCS/ΔCCS), which is ∼1.5× higher than achievable with a 78 cm path length drift tube IMS. Additionally, the entire ion mobility range was successfully transmitted in a single separation. We also demonstrated the miniSLIM's performance as a standalone IMS system (i.e., without MS), which showed baseline separation between all AgTM cations and a clear differentiation between different charge states of a standard peptide mixture. Overall, the miniSLIM provides a compact alternative to high performance IMS instruments possessing similar path lengths.

A proof of concept study for the differentiation of SARS-CoV-2, hCoV-NL63, and IAV-H1N1 in vitro cultures using ion mobility spectrometry

Rapid, high-throughput diagnostic tests are essential to decelerate the spread of the novel coronavirus disease 2019 (COVID-19) pandemic. While RT-PCR tests performed in centralized laboratories remain the gold standard, rapid point-of-care antigen tests might provide faster results. However, they are associated with markedly reduced sensitivity. Bedside breath gas analysis of volatile organic compounds detected by ion mobility spectrometry (IMS) may enable a quick and sensitive point-of-care testing alternative. In this proof-of-concept study, we investigated whether gas analysis by IMS can discriminate severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) from other respiratory viruses in an experimental set-up. Repeated gas analyses of air samples collected from the headspace of virus-infected in vitro cultures were performed for 5 days. A three-step decision tree using the intensities of four spectrometry peaks correlating to unidentified volatile organic compounds allowed the correct classification of SARS-CoV-2, human coronavirus-NL63, and influenza A virus H1N1 without misassignment when the calculation was performed with data 3 days post infection. The forward selection assignment model allowed the identification of SARS-CoV-2 with high sensitivity and specificity, with only one of 231 measurements (0.43%) being misclassified. Thus, volatile organic compound analysis by IMS allows highly accurate differentiation of SARS-CoV-2 from other respiratory viruses in an experimental set-up, supporting further research and evaluation in clinical studies.

Electrospray Ionization Ion Mobility Mass Spectrometry

Electrospray ionization ion mobility mass spectrometry (ESI-IMS-MS) is a rapidly progressing analytical technique for the examination of complex compounds in the gas phase. ESI-IMS-MS separates isomers, provides structural information, and quantitatively identifies peptides, lipids, carbohydrates, polymers, and metabolites in biological samples. ESI-IMS-MS has pharmaceutical, environmental, and manufacturing applications quickly characterizing drugs, petroleum products, and metal macromolecules. This review provides the history of ESI-IMS-MS development and applications to date.

Non-Targeted Screening Approaches for Profiling of Volatile Organic Compounds Based on Gas Chromatography-Ion Mobility Spectroscopy (GC-IMS) and Machine Learning

Due to its high sensitivity and resolving power, gas chromatography-ion mobility spectrometry (GC-IMS) is a powerful technique for the separation and sensitive detection of volatile organic compounds. It is a robust and easy-to-handle technique, which has recently gained attention for non-targeted screening (NTS) approaches. In this article, the general working principles of GC-IMS are presented. Next, the workflow for NTS using GC-IMS is described, including data acquisition, data processing and model building, model interpretation and complementary data analysis. A detailed overview of recent studies for NTS using GC-IMS is included, including several examples which have demonstrated GC-IMS to be an effective technique for various classification and quantification tasks. Lastly, a comparison of targeted and non-targeted strategies using GC-IMS are provided, highlighting the potential of GC-IMS in combination with NTS.

Quantification of Volatile Acetone Oligomers Using Ion-Mobility Spectrometry

BACKGROUND

Volatile acetone is a potential biomarker that is elevated in various disease states. Measuring acetone in exhaled breath is complicated by the fact that the molecule might be present as both monomers and dimers, but in inconsistent ratios. Ignoring the molecular form leads to incorrect measured concentrations. Our first goal was to evaluate the monomer-dimer ratio in ambient air, critically ill patients, and rats. Our second goal was to confirm the accuracy of the combined (monomer and dimer) analysis by comparison to a reference calibration system.

METHODS

Volatile acetone intensities from exhaled air of ten intubated, critically ill patients, and ten ventilated Sprague-Dawley rats were recorded using ion-mobility spectrometry. Acetone concentrations in ambient air in an intensive care unit and in a laboratory were determined over 24 hours. The calibration reference was pure acetone vaporized by a gas generator at concentrations from 5 to 45 ppb_v (parts per billion by volume).

RESULTS

Acetone concentrations in ambient laboratory air were only slightly greater (5.6 ppb_v; 95% CI 5.1-6.2) than in ambient air in an intensive care unit (5.1 ppb_v; 95% CI 4.4-5.5; p < 0.001). Exhaled acetone concentrations were only slightly greater in rats (10.3 ppb_v; 95% CI 9.7-10.9) than in critically ill patients (9.5 ppb_v; 95% CI 7.9-11.1; p < 0.001). Vaporization yielded acetone monomers (1.3-5.3 mV) and dimers (1.4-621 mV). Acetone concentrations (ppb_v) and corresponding acetone monomer and dimer intensities (mV) revealed a high coefficient of determination (R ² = 0.96). The calibration curve for acetone concentration (ppb_v) and total acetone (monomers added to twice the dimers; mV) was described by the exponential growth 3-parameter model, with an R ² = 0.98.

CONCLUSION

The ratio of acetone monomer and dimer is inconsistent and varies in ambient air from place-to-place and across individual humans and rats. Monomers and dimers must therefore be considered when quantifying acetone. Combining the two accurately assesses total volatile acetone.

Strategy for the identification of flavor compounds in e-liquids by correlating the analysis of GCxIMS and GC-MS

This work presents a strategy to correlate the results from gas chromatography coupled ion mobility spectrometry (GCxIMS) and mass spectrometry (GC-MS) to enable a simpler and cheaper analysis of flavor compounds in e-liquids. The use of the retention index for GCxIMS measurements was validated for its application to correlate results with GC-MS data. The easy detection of the GCxIMS for substances at concentrations as low as 1 μg/L can therefore be combined with the identification power of the MS. The use of the MS' mass signals and wide-spread availability of mass spectra libraries reduces the effort necessary to choose the correct reference standards for the identification of unknown substances. Between both detectors, correlating of the retention time indices was achieved for ± 1%. 2-Alkanones were used as an alternative reference point for the IMS and the well-established alkanes for the MS. The application on flavor compounds in e-liquids shows equal or better results than those presented for more complex, hardware-based correlations like line splitting. Additionally, the inverted reduced mobility combined with the retention index of a non-polar column enables simple extrapolation for the confirmation of expected substances as well as the use in a transferable database. For the first time, this comprehensive application allows an extensive, simplified, and cheap identification of flavor compounds in e-liquids by GCxIMS and GC-MS.

Multidimensional Separations of Intact Phase II Steroid Metabolites Utilizing LC-Ion Mobility-HRMS

The detection and unambiguous identification of anabolic-androgenic steroid metabolites are essential in clinical, forensic, and antidoping analyses. Recently, sulfate phase II steroid metabolites have received increased attention in steroid metabolism and drug testing. In large part, this is because phase II steroid metabolites are excreted for an extended time, making them a potential long-term chemical marker of choice for tracking steroid misuse in sports. Comprehensive analytical methods, such as liquid chromatography-tandem mass spectrometry (LC-MS/MS), have been used to detect and identify glucuronide and sulfate steroids in human urine with high sensitivity and reliability. However, LC-MS/MS identification strategies can be hindered by the fact that phase II steroid metabolites generate nonselective ion fragments across the different metabolite markers, limiting the confidence in metabolite identifications that rely on exact mass measurement and MS/MS information. Additionally, liquid chromatography-high-resolution mass spectrometry (LC-HRMS) is sometimes insufficient at fully resolving the analyte peaks from the sample matrix (commonly urine) chemical noise, further complicating accurate identification efforts. Therefore, we developed a liquid chromatography-ion mobility-high resolution mass spectrometry (LC-IM-HRMS) method to increase the peak capacity and utilize the IM-derived collision cross section (CCS) values as an additional molecular descriptor for increased selectivity and to improve identifications of intact steroid analyses at low concentrations.

Current status and future prospects for ion-mobility mass spectrometry in the biopharmaceutical industry

Detailed characterization of protein reagents and biopharmaceuticals is key in defining successful drug discovery campaigns, aimed at bringing molecules through different discovery stages up to development and commercialization. There are many challenges in this process, with complex and detailed analyses playing paramount roles in modern industry. Mass spectrometry (MS) has become an essential tool for characterization of proteins ever since the onset of soft ionization techniques and has taken the lead in quality assessment of biopharmaceutical molecules, and protein reagents, used in the drug discovery pipeline. MS use spans from identification of correct sequences, to intact molecule analyses, protein complexes and more recently epitope and paratope identification. MS toolkits could be incredibly diverse and with ever evolving instrumentation, increasingly novel MS-based techniques are becoming indispensable tools in the biopharmaceutical industry. Here we discuss application of Ion Mobility MS (IMMS) in an industrial setting, and what the current applications and outlook are for making IMMS more mainstream.

Reaction Monitoring and Structural Characterisation of Coordination Driven Self-Assembled Systems by Ion Mobility-Mass Spectrometry

Nature creates exquisite molecular assemblies, required for the molecular-level functions of life, via self-assembly. Understanding and harnessing these complex processes presents an immense opportunity for the design and fabrication of advanced functional materials. However, the significant industrial potential of self-assembly to fabricate highly functional materials is hampered by a lack of knowledge of critical reaction intermediates, mechanisms, and kinetics. As we move beyond the covalent synthetic regime, into the domain of non-covalent interactions occupied by self-assembly, harnessing and embracing complexity is a must, and non-targeted analyses of dynamic systems are becoming increasingly important. Coordination driven self-assembly is an important subtype of self-assembly that presents several wicked analytical challenges. These challenges are "wicked" due the very complexity desired confounding the analysis of products, intermediates, and pathways, therefore limiting reaction optimisation, tuning, and ultimately, utility. Ion Mobility-Mass Spectrometry solves many of the most challenging analytical problems in separating and analysing the structure of both simple and complex species formed via coordination driven self-assembly. Thus, due to the emerging importance of ion mobility mass spectrometry as an analytical technique tackling complex systems, this review highlights exciting recent applications. These include equilibrium monitoring, structural and dynamic analysis of previously analytically inaccessible complex interlinked structures and the process of self-sorting. The vast and largely untapped potential of ion mobility mass spectrometry to coordination driven self-assembly is yet to be fully realised. Therefore, we also propose where current analytical approaches can be built upon to allow for greater insight into the complexity and structural dynamics involved in self-assembly.

Dynamic Time-Warping Correction for Shifts in Ultrahigh Resolving Power Ion Mobility Spectrometry and Structures for Lossless Ion Manipulations

Detection of arrival time shifts between ion mobility spectrometry (IMS) separations can limit achievable resolving power (Rp), particularly when multiple separations are summed or averaged, as commonly practiced in IMS. Such variations can be apparent in higher Rp measurements and are particularly evident in long path length traveling wave structures for lossless ion manipulations (SLIM) IMS due to their typically much longer separation times. Here, we explore data processing approaches employing single value alignment (SVA) and nonlinear dynamic time warping (DTW) to correct for variations between IMS separations, such as due to pressure fluctuations, to enable more effective spectrum summation for improving Rp and detection of low-intensity species. For multipass SLIM IMS separations, where narrow mobility range measurements have arrival times that can extend to several seconds, the SVA approach effectively corrected for such variations and significantly improved Rp for summed separations. However, SVA was much less effective for broad mobility range separations, such as obtained with multilevel SLIM IMS. Changes in ions' arrival times were observed to be correlated with small pressure changes, with approximately 0.6% relative arrival time shifts being common, sufficient to result in a loss of Rp for summed separations. Comparison of the approaches showed that DTW alignment performed similarly to SVA when used over a narrow mobility range but was significantly better (providing narrower peaks and higher signal intensities) for wide mobility range data. We found that the DTW approach increased Rp by as much as 115% for measurements in which 50 IMS separations over 2 s were summed. We conclude that DTW is superior to SVA for ultra-high-resolution broad mobility range SLIM IMS separations and leads to a large improvement in effective Rp, correcting for ion arrival time shifts regardless of the cause, as well as improving the detectability of low-abundance species. Our tool is publicly available for use with universal ion mobility format (.UIMF) and text (.txt) files.

Ion Mobility–Mass Spectrometry for Bioanalysis

This paper aims to cover the main strategies based on ion mobility spectrometry (IMS) for the analysis of biological samples. The determination of endogenous and exogenous compounds in such samples is important for the understanding of the health status of individuals. For this reason, the development of new approaches that can be complementary to the ones already established (mainly based on liquid chromatography coupled to mass spectrometry) is welcomed. In this regard, ion mobility spectrometry has appeared in the analytical scenario as a powerful technique for the separation and characterization of compounds based on their mobility. IMS has been used in several areas taking advantage of its orthogonality with other analytical separation techniques, such as liquid chromatography, gas chromatography, capillary electrophoresis, or supercritical fluid chromatography. Bioanalysis is not one of the areas where IMS has been more extensively applied. However, over the last years, the interest in using this approach for the analysis of biological samples has clearly increased. This paper introduces the reader to the principles controlling the separation in IMS and reviews recent applications using this technique in the field of bioanalysis.

Usage considerations for headspace-gas chromatography-ion mobility spectrometry as a suitable technique for qualitative analysis in a routine lab

The potential of headspace-gas chromatography-ion mobility spectrometry (HS-GC-IMS) to perform non-targeted qualitative analysis of complex samples has led to an unprecedented increase in its popularity in recent years. The operating principle of IMS makes quality control essential to ensure adequate results. Besides this, the suitability of GC-IMS is determined by multiple phenomena that take place before and during IMS detection. The present work discusses a novel GC-IMS quality control protocol for both beginners and experienced users. Likewise, it describes factors that must be taken into account in order to develop a robust GC-IMS qualitative analysis method and, if needed, to achieve the identification of VOCs present in real samples. The developed quality control protocol was successfully employed in our laboratory for the routine analysis of >500 real samples (olive oil and Iberian ham) for 6 months, thus it is recommended for the analysis of a great number of complex samples. Furthermore, the behaviour of the ions produced in the ionisation chamber and the possible reactions between them in GC-IMS qualitative analysis were assessed.

Resolution enhancement of overlapping peaks of ion mobility spectrometry based on improved particle swarm optimization algorithm

RATIONALE

Ion mobility spectrometry (IMS) is a powerful analytical tool that has been widely applied in many fields. However, the limited structural resolution of IMS results in peak overlapping in the analysis of samples with similar structures. We propose a novel method, improved particle swarm optimization (IPSO), for the separation of IMS overlapping peaks.

METHODS

This method, which prevents local optimization, is used to identify the peak model coefficients of IMS. Moreover, we use the half-peak width characteristics of IMS to determine the particle position range, which eliminates impossible combinations of single peaks and reduces the difficulty of identification of coefficients.

RESULTS

During a comparison in performance between IPSO and the genetic algorithm (GA), the results show that the maximum separation error of IPSO is only 1.45%, while the error of the GA is up to 17.43%. Moreover, the time consumed by IPSO is 95% less than that of the GA, and IPSO has a greater robustness under the same separation error conditions.

CONCLUSIONS

The method proposed provides accurate analytical results in separating overlapping IMS peaks even in cases of severe overlaps, which greatly enhances the structural resolution of IMS.

Large-scale evaluation of ion mobility spectrometry for the rapid detection of synthetic cannabinoid receptor agonists in infused papers in prisons

Synthetic cannabinoid receptor agonists (SCRAs), colloquially known as "spice," are commonly used in prisons and enter establishments via the mail in the form of infused papers. Many prisons use benchtop ion mobility spectroscopy (IMS) instruments to screen mail and seized materials for the presence of SCRAs and other controlled substances. The selectivity and sensitivity of Rapiscan Itemiser^® 3E and Itemiser^® 4DN Ion Trap Mobility Spectroscopy™ (ITMS™) systems were evaluated using 21 SCRA reference standards. Some differences in the SCRA reduced mobility (K₀ ) values were observed between this study and those reported previously using IMS detection systems, particularly for cumyl and quinolinyl SCRAs (e.g., 5F-PB-22, Cumyl-4CN-BINACA, and 5F-Cumyl-PEGACLONE), although this was found to have little effect at an operational level. Operational reliability of the systems was evaluated by analyzing 392 paper and card samples with known drug content. ITMS™ system results (e.g., detect or nondetect) were in agreement with gas chromatography-mass spectrometry (GC-MS) analysis in up to 95% of samples tested. Overall, this study found the ITMS™ systems tested to be effective instruments when deployed for the rapid detection of SCRA-infused papers. Used effectively and with up-to-date substance libraries, they will help reduce the supply of SCRAs into prisons and identify emerging threats as they arise. Several emerging SCRAs (5F-MPP-PICA, 5F-EMB-PICA, and 4F-MDMB-BICA) were detected for the first time in Scottish prisons between May and August 2020 as a result of routine monitoring, and all were detected using the ITMS™ systems tested.

Recent applications of ion mobility spectrometry in natural product research

Ion mobility spectrometry (IMS) is a rapid separation technique capable of extracting complementary structural information to chromatography and mass spectrometry (MS). IMS, especially in combination with MS, has experienced inordinate growth in recent years as an analytical technique, and elicited intense interest in many research fields. In natural product analysis, IMS shows promise as an additional tool to enhance the performance of analytical methods used to identify promising drug candidates. Potential benefits of the incorporation of IMS into analytical workflows currently used in natural product analysis include the discrimination of structurally similar secondary metabolites, improving the quality of mass spectral data, and the use of mobility-derived collision cross-section (CCS) values as an additional identification criterion in targeted and untargeted analyses. This review aims to provide an overview of the application of IMS to natural product analysis over the last six years. Instrumental aspects and the fundamental background of IMS will be briefly covered, and recent applications of the technique for natural product analysis will be discussed to demonstrate the utility of the technique in this field.

Field-Dependent Reduced Ion Mobilities of Positive and Negative Ions in Air and Nitrogen in High Kinetic Energy Ion Mobility Spectrometry (HiKE-IMS)

In High Kinetic Energy Ion Mobility Spectrometry (HiKE-IMS), ions are formed in a reaction region and separated in a drift region, which is similar to classical drift tube ion mobility spectrometers (IMS) operated at ambient pressure. However, in contrast to the latter, the HiKE-IMS is operated at a decreased background pressure of 10-40 mbar and achieves high reduced electric field strengths of up to 120 Td in both the reaction and the drift region. Thus, the HiKE-IMS allows insights into the chemical kinetics of ion-bound water cluster systems at effective ion temperatures exceeding 1000 K, although it is operated at the low absolute temperature of 45 °C. In this work, a HiKE-IMS with a high resolving power of R_P = 140 is used to study the dependence of reduced ion mobilities on the drift gas humidity and the effective ion temperature for the positive reactant ions H₃O⁺(H₂O)_n, O₂⁺(H₂O)_n, NO⁺(H₂O)_n, NO₂⁺(H₂O)_n, and NH₄⁺(H₂O)_n, as well as the negative reactant ions O₂^-(H₂O)_n, O₃^-(H₂O)_n, CO₃^-(H₂O)_n, HCO₃^-(H₂O)_n, and NO₂^-(H₂O)_n. By varying the reduced electric field strength in the drift region, cluster transitions are observed in the ion mobility spectra. This is demonstrated for the cluster systems H₃O⁺(H₂O)_n and NO⁺(H₂O)_n.

Evidence of conformational landscape alteration and macromolecular complex formation in the early stages of in vitro human prion protein oxidation

Oxidative stress is proposed to be one of the major causes of neurodegenerative diseases. Cellular prion protein (PrP) oxidation has been widely studied using chemical reagents such as hydrogen peroxide. However, the experimental conditions used do not faithfully reflect the physiological environment of the cell. With the goal to explore the conformational landscape of PrP under oxidative stress, we conducted a set of experiments combining the careful control of the nature and the amount of ROS produced by a⁶⁰Co γ-irradiation source. Characterization of the resulting protein species was achieved using a set of analytical techniques. Under our experimental condition hydroxyl radical are the main reactive species produced. The most important findings are i) the formation of molecular assemblies under oxidative stress, ii) the detection of a majority of unmodified monomer mixed with oxidized monomers in these molecular assemblies at low hydroxyl radical concentration, iii) the absence of significant oxidation on the monomer fraction after irradiation. Molecular assemblies are produced in small amounts and were shown to be an octamer. These results suggest either i) an active recruitment of intact monomers by molecular assemblies' oxidized monomers then inducing a structural change of their intact counterparts or ii) an intrinsic capability of intact monomer conformers to spontaneously associate to form stable molecular assemblies when oxidized monomers are present. Finally, abundances of the intact monomer conformers after irradiation were modified. This suggests that monomers of the molecular assemblies exchange structural information with intact irradiated monomer. All these results shed a new light on structural exchange information between PrP monomers under oxidative stress.

Negative Reactant Ion Formation in High Kinetic Energy Ion Mobility Spectrometry (HiKE-IMS)

Due to the operation at background pressures between 10-40 mbar and high reduced electric field strengths of up to 120 Td, the ion-molecule reactions in High Kinetic Energy Ion Mobility Spectrometers (HiKE-IMS) differ from those in classical ambient pressure IMS. In the positive ion polarity mode, the reactant ions H⁺(H₂O)_n, O₂⁺(H₂O)_n, and NO⁺(H₂O)_n are observed in the HiKE-IMS. The relative abundances of these reactant ion species significantly depend on the reduced electric field strength in the reaction region, the operating pressure, and the water concentration in the reaction region. In this work, the formation of negative reactant ions in HiKE-IMS is investigated in detail. On the basis of kinetic and thermodynamic data from the literature, the processes resulting in the formation of negative reactant ions are kinetically modeled. To verify the model, we present measurements of the negative reactant ion population in the HiKE-IMS and its dependence on the reduced electric field strength as well as the water and carbon dioxide concentrations in the reaction region. The ion species underlying individual peaks in the ion mobility spectrum are identified by coupling the HiKE-IMS to a time-of-flight mass spectrometer (TOF-MS) using a simple gated interface that enables the transfer of selected peaks of the ion mobility spectrum into the TOF-MS. Both the theoretical model as well as the experimental data suggest the predominant generation of the oxygen-based ions O^-, OH^-, O₂^-, and O₃^- in purified air containing 70 ppm_v of water and 30 ppm_v of carbon dioxide. Additionally, small amounts of NO₂^- and CO₃^- are observed. Their relative abundances highly depend on the reduced electric field strength as well as the water and carbon dioxide concentration. An increase of the water concentration in the reaction region results in the generation of OH^- ions, whereas increasing the carbon dioxide concentration favors the generation of CO₃^- ions, as expected.

Ion mobility spectrometry - Mass spectrometry coupling for synthetic polymers

This review covers applications of ion mobility spectrometry (IMS) hyphenated to mass spectrometry (MS) in the field of synthetic polymers. MS has become an essential technique in polymer science, but increasingly complex samples produced to provide desirable macroscopic properties of high-performance materials often require separation of species prior to their mass analysis. Similar to liquid chromatography, the IMS dimension introduces shape selectivity but enables separation at a much faster rate (milliseconds vs minutes). As a post-ionization technique, IMS can be hyphenated to MS to perform a double separation dimension of gas-phase ions, first as a function on their mobility (determined by their charge state and collision cross section, CCS), then as a function of their m/z ratio. Implemented with a variety of ionization techniques, such coupling permits the spectral complexity to be reduced, to enhance the dynamic range of detection, or to achieve separation of isobaric ions prior to their activation in MS/MS experiments. Coupling IMS to MS also provides valuable information regarding the 3D structure of polymer ions in the gas phase and regarding how to address the question of how charges are distributed within the structure. Moreover, the ability of IMS to separate multiply charged species generated by electrospray ionization yields typical IMS-MS 2D maps that permit the conformational dynamics of synthetic polymer chains to be described as a function of their length.

Urine headspace analysis with field asymmetric ion mobility spectrometry for detection of chronic kidney disease

Electronic noses (eNoses) are an emerging class of experimental diagnostic tools. They are based on the detection of volatile organic compounds. Urine is used as sample medium in several publications but neither the effect of chronic kidney disease (CKD) on the analysis nor the potential to detect CKD has been explored. Materials & methods: We utilized an eNose based on field asymmetric ion mobility spectrometry (FAIMS) technology to classify urine samples from CKD patients and controls. Results: We were able to differentiate extremes of kidney function with an accuracy of 81.4%. Conclusion: In this preliminary study, applying eNose technology we were able to distinguish the patients with impaired kidney function from those with normal kidney function.

A Combined Infrared Ion Spectroscopy and Computational Chemistry Study of Hydroxyproline Isomers

Hydroxyproline is a common variation of proline, with diverse biological roles. The hydroxylation of proline gives rise to several (natural and/or synthetic) isomeric forms, including both positional isomers and stereoisomers. While mass spectrometry is widely touted as a very selective analytical technique, the identification of closely related isomers often poses a challenge. In these cases, allied technologies become helpful in providing full characterization. Here, infrared multiple photon dissociation (IRMPD) spectroscopy is used to differentiate between three isomers, namely cis-3-hydroxyproline, cis-4-hydroxyproline, and trans-4-hydroxyproline. In contrast to the protonated species which show only minor variations in their IRMPD spectra, lithiated species were found to display significant spectral differences, making their differentiation more straightforward. The conformational origin of these spectral differences was investigated by complementary quantum-chemical calculations.