Incorporation of cross-linked/acetylated tapioca starches on the gelling properties, rheological behaviour, and microstructure of low-salt myofibrillar protein gels: Perspective on phase transition

This study investigated the gelling properties, rheological behaviour, and microstructure of heat-induced, low-salt myofibrillar protein (MP) gels containing different levels (2%, 4%, 6%, and 8%, w/w) of cross-linked (CTS) or acetylated (ATS) tapioca starch. The results indicated that either CTS or ATS significantly enhanced the gel strength and water-holding capacity of low-salt MP gels (P < 0.05), an outcome verified by the rheological behaviour test results under different modes. Furthermore, iodine-staining images indicated that the MP-dominated continuous phase gradually transited to a starch-dominated phase with increasing CTS or ATS levels, and 4% was the critical point for this phase transition. In addition, hydrophobic interactions and disulphide bonds constituted the major intermolecular forces of low-salt MP gels, effectively promoting phase transition. In brief, modified tapioca starches possess considerable potential application value in low-salt meat products.

Cross-linked modification of tapioca starch by sodium Trimetaphosphate: An influence on its structure

This study aimed to examine the changes in the structural characterization of cross-linked tapioca treated with sodium trimetaphosphate(STMP). The degree of substitution in the cross-linked starch was determined by the iodine absorption method. Scanning electron microscopy, particle size measurement, Fourier-transform infrared spectroscopy (FT-IR), and x-ray diffraction (XRD) were used to characterize the structure of modified tapioca starch at different substitution degrees. The results demonstrated that the degree of substitution of cross-linked starch increased with the increase in the amount of the cross-linking agent. The modified starch particles aggregated to form a mass structure, but the average particle size did not change with the cross-linker content and was about 17 μm. FT-IR and XRD experiments showed that the cross-linking esterification of starch with sodium trimetaphosphate generated new phosphate groups, increasing the content of phosphoric acid in starch, and the A-type crystalline structure of starch was not changed.

Adsorption sites and interactions of pigments in molasses-based distillery effluent on starch-based composites: Ternary competitive adsorption and theoretical calculations

The pigment present in molasses-based distillery effluent constitutes a primary factor influencing its degradation. Adsorption is an effective approach to eliminate pigment from wastewater. In this study, a cationic cassava starch (CCS) magnetic composite (CCS@Fe3O4) was prepared and used as adsorbents for the removal of undesirable pigments. The adsorption behaviors of caffeic acid (CA), gallic acid (GA), and melanoidin (ME) on CCS@Fe3O4 in the wastewater were investigated using single and ternary competitive adsorption systems. The equilibrium adsorption capacities of CA, GA, and ME on CCS@Fe3O4 were 197.04, 195.55, and 623.97 mg/g at the optimized conditions (0.3 mg/mL CCS@Fe3O4 dosage, temperature of 38 °C, and pH of 7). The adsorption kinetic model showed that chemisorption accounted for most of the adsorption of CA, GA, and ME on CCS@Fe3O4. The adsorption mechanisms of pigments on CCS@Fe3O4 were explored at the molecular level through quantum chemical calculations. The electrostatic potentials (ESP), average local ionisation energy (ALIE), and Fukui indices calculation indicated that the quaternary ammonium group in CCS@Fe3O4 was more susceptible to electrophilic reactions. The CC and benzene rings in CA and GA, and the COO- in ME, represent sites of attack for quaternary ammonium during adsorption. Furthermore, the competitive adsorption results, adsorption energy, and electron transfer data demonstrated that the adsorption capacity of CCS@Fe3O4 for pigments followed the order ME>GA>CA. Overall, the competitive adsorption mechanisms of CA, GA, and ME on CCS@Fe3O4 were unveiled, with quantum chemical calculations offering crucial insights into the adsorption process.

Photo-crosslinking methacrylated-amylopectin/polyacrylamide hydrogels loading curcumin for applications as degradable, injectable, and antibacterial wound dressings

The preparation of biodegradable and antibacterial hydrogels has important clinical value. In this work, a novel strategy has been developed to prepare degradable hydrogel dressings without chemical crosslinking agent using methacrylate anhydride (MA)-modified amylopectin (APMA) and polyacrylamide (PAM). After introducing CC bonds, APMA/PAM hydrogels can be formed under light irradiation. This strategy improves the gelling ability of AP and degradation properties of the hydrogel by avoiding the addition of crosslinking agent. The degradation rate of APMA/PAM hydrogel is 74.04 ± 0.69 % within 12 weeks, while that of APMA/PAM hydrogel containing crosslinking agent is only 38.5 ± 0.1 %. The APMA/PAM hydrogel loading curcumin (Cur) (APMA/PAM-Cur) exhibits high antibacterial efficiency of 98.29 ± 0.41 % and 97.18 ± 0.81 % against S. aureus and E. coli, respectively, with light irradiation. Animal experiments show that the APMA/PAM-Cur hydrogel reduces the infiltration of inflammatory factors, increases the density of collagen, and makes the newly formed granulation tissue thicker and tighter. This study not only proves the promising potential of the APMA/PAM-Cur hydrogel as degradable and antibacterial wound dressing for clinical treatment, but also provides a new strategy for developing low-cost, degradable, and antibacterial wound dressings and reducing antibiotic abuse and environmental pollution caused by medical waste.

Chitosan/starch based unoxidized tannic acid modified microparticles for rapid hemostasis with broad spectrum antibacterial activity

The development of a rapid hemostat through a facile method with co-existing antibacterial activity and minimum erythrocyte lysis property stands as a major requirement in the field of hemostasis. Herein, a series of novel microparticle hemostats were synthesized using chitosan, different hydrothermally-treated starches, and cross-linked with tannic acid (TA) simultaneously in an unoxidized environment via ionotropic gelation method. Hemostats' comparative functional properties, such as adjustable antibacterial and erythrocyte compatibility upon various starch additions were evaluated. The in vivo hemostatic study revealed that the developed hemostats for mouse liver laceration and rat tail amputation had clotting times (13 s and 38 s, respectively) and blood loss (51 mg and 62 mg, respectively) similar to those of Celox™. The erythrocyte adhesion test suggested that erythrocyte distortion can be lowered by modifying the antibacterial hemostats with different starches. The broad-spectrum antibacterial efficacy of the hemostats remained intact against S. aureus (>90 %), E. coli (>80 %), and P. mirabilis bacteria upon starch modification. They also demonstrated high hemocompatibility (<3 % hemolysis ratio), moderate cell viability (>81 %), in vivo biodegradation, and angiogenesis indicating adequate biocompatibility and wound healing. The developed hemostats hold significant promise to be employed as rapid hemostatic agents for preventing major bleeding and bacterial infection in emergencies.

Preparation of Ultra-High Temperature Resistant Cyclodextrin-Based Filtration Loss Reducer for Water-Based Drilling Fluids

In the development of ultra-deep wells, extremely high temperatures can lead to inefficiency of additives in drilling fluids. Hence, there is a need to prepare additives with a simple preparation process and good effects at ultra-high temperatures to ensure stable drilling fluid performance. In this study, a high temperature resistant filtration loss polymer (LY-2) was prepared using γ-methacryloyloxypropyltrimethoxysilane (KH570), N,N-dimethylallyl ammonium chloride (DMDAAC), sodium p-styrenesulfonate (SSS), and β-cyclodextrin (β-CD). The impact of the different monomer ratios on particle size, rheology, and filtration performance was systematically investigated. Infrared spectroscopy afforded the structural features. Thermogravimetric Analysis detected the temperature stability, and scanning electron microscopy characterized the polymer micromorphology. LY-2 was completely decomposed at a temperature above 600 °C. Experiments showed FLAPI of the drilling fluid containing 3% LY-2 aged at 260 °C/16 h was only 5.1 mL, which is 85.4% lower compared to the base fluid. This is attributed to the synergistic effect of the polymer adsorption through chemical action at high temperatures and the blocking effect of carbon nanoparticles on the filter cake released by cyclodextrin carbonization at high temperatures. Comparing LY-2 with commercial filter loss reducers shows that LY-2 has excellent temperature resistance, which exhibited five times higher filtration performance and relatively low cost, making it possible to be applied to ultra-high temperature drilling operations in an industrial scale-up.

Study of the structural characterization, physicochemical properties and antioxidant activities of phosphorylated long-chain inulin with different degrees of substitution

In this study, phosphorylated derivatives of long-chain inulin with different substitution degrees were prepared. The synthesized samples were named PFXL-1, PFXL-2, PFXL-3, and PFXL-4 according to their degree of substitution (from low to high). The structures of FXL and PFXL were characterized by infrared spectroscopy and nuclear magnetic resonance spectroscopy, and the results indicated the successful introduction of phosphate groups. FXL and PFXL were composed of two types of sugar, fructose and glucose, with a molar ratio of 0.977:0.023. The SEM results showed that phosphorylation changed the morphology of FXL from an irregular mass to small spherical aggregates. The XRD pattern showed that the crystallinity was reduced by the introduction of phosphate groups. The Mw of FXL was 2649 g/mol, and the Mw of PFXL-4 increased the most (2965 g/mol). Additionally, PFXL was more stable and uniform, and the absolute value of the PFXL potential reached 7.83 mV. Phosphorylation decreased the weight loss rate of FXL and improved the viscoelastic properties and antioxidant activity of FXL. This study presents a method for the modification of FXL, demonstrating that phosphorylation can enhance its physicochemical properties and physiological activity and suggesting its potential as a functional food and quality modifier.

Influence of the cationic degree and molar mass of modified starches on their physicochemical properties and capability to enhance the oil recovery process

Polysaccharides and their derivatives are used as additives in numerous petroleum industrial processes, especially in enhanced oil recovery (EOR). There exists however, a lack of studies concerning how their physicochemical properties affect the oil recovery process. This work presents an investigation of a series of 2-hydroxy-3-(trimethylammonium)propyl starches (HTPS) with different molar masses and cationic degrees that are potentially useful for EOR. It was investigated surface/interfacial tensions, rheological profile, emulsion index and wettability alteration. The results provide experimental evidence that the HTPS intrinsic properties affect the measured properties. The HTPS solution/oil interfacial tension (IFT) ranged from a low value of 19.0 to a high value of 34.0 mN/m and correlates positively with the molar mass of the HTPS. In contrast, the rheological behavior displays correlations with the molar mass and the degree of cationization. Furthermore, the 1 % HTPS solutions presented around 10 % of viscosity increase in comparison to brines typically used in waterflooding. The derivative with a higher molar mass and intermediate degree of cationization (HTPS 2) was more effective in changing the wetting condition of an aged limestone with a wettability alteration index (WAI) of 52 % while the commercial surfactant cetyltrimethylammonium bromide (CTAB) presented a WAI of 32.6 %.

Altered leaching composition of maize starch granules by irradiative depolymerization: The key role of degraded molecular structure

The molecular composition of starch leachates from starch-based foods has been recently recognised as a crucial determinant of food properties. However, there is limited knowledge on the regulation of this composition through irradiative depolymerization of starch. This research investigates the leaching behaviour of maize starch depolymerized by electron beam irradiation, and the relationship between the composition of leached starch and structures of modified starch granules. The analysis using 1H NMR spectroscopy confirmed a decrease in the degree of branching (from 4.4 % to 2.8 %), while size-exclusion chromatography identified a newly-derived amylopectin fraction of a smaller hydrodynamic radius (approximately 60-80 nm). The structural properties of the starch granules were also analysed, revealing an increased BET-area of granules and reduced total crystallinity after depolymerization. In the leachates of swollen granules, the bimodal distribution of starch molecules evolves into unimodal with the increase of the irradiative dosage, while modified starch leached more starch molecules with Rh < 10 nm. The results of principal component analysis and Pearson correlation analysis indicate that the degree of branching of degraded starch molecules, as well as the newly-derived amylopectin fraction, significantly correlates (p < 0.01) with the molecular size of leached starch molecules (Rh < 10 nm). It is thus proposed that the cleavage of α-1,6 linkage may be a critical factor in controlling the leaching process of irradiated starch granules. This study highlights the potential of irradiative degradation to control the molecular composition and structure of starch leachates, thereby optimizing the properties of starch-based foods.

Hydrolysis effects on the water uptake of starch-g-glycidyl methacrylate (GMASt)/dimethylacrylamide (DMAAm)-based hydrogels for potential agricultural purposes

This work assessed the effect of different hydrolysis periods on the properties of hydrogels based on 75 % w w-1 of N,N'-dimethyl acrylamide (DMAAm) and 25 % w w-1 of starch-g-(glycidyl methacrylate) (GMASt). FTIR results confirmed the conversion of ester groups into carboxylic acids and carboxylates, besides forming a keto-enol tautomer due to the peeling reaction of starch. For DMAAm, the hydrolysis mostly converted amide into carboxylate groups. The morphology, thermal stability, and the mechanical properties of the predominantly amorphous matrices (as confirmed by XRD results) did not drastically change even after 10 days of hydrolysis in alkali media. However, the thermogravimetric analysis results suggested that DMAAm partially protected GMASt from the hydrolysis. The swelling degree of the matrix increased from (10.1 ± 2.1) g g-1 to (61.9 ± 2.6) g g-1 after 1 day of hydrolysis, but no statistical differences (at 95 % of significance) were observed for the matrices hydrolyzed for longer periods, confirming that the maximum hydrolysis occurred within 24 h. The results confirmed that the hydrolysis increased the water uptake of the GMASt/DMAAm-based matrices, making appealing for uses as a water retentor for agricultural purposes.

Modeling and investigation of swelling kinetics of sodium carboxymethyl cellulose/starch/citric acid superabsorbent polymer

Crosslinked hydrophilic polymers with high water absorption rates are known as superabsorbent polymers (SAPs). Most commercial superabsorbent polymers are made with acrylic acid, which is difficult to biodegrade. So, in this investigation, carboxymethyl cellulose (CMC) was utilized as a significant component in the synthesis of polysaccharide-based SAPs. Citric acid (CA) and starch were chosen as crosslinking agents because they are more eco-friendly, non-toxic, and biodegradable than traditional crosslinking agents. FTIR analysis revealed that the superabsorbent polymer product contains a crosslinked structure of CMC and starch with side chains that carry carboxylate functional groups. Superabsorbent weight loss and grafting data were satisfactorily studied using the TGA approach. Under optimum circumstances, the SAP2 water absorbency capacity in distilled water was 287.37 g.g-1 and SAP1 absorbency capacity in a solution containing 0.9 wt% NaCl was 52.18 g.g-1. Moreover, Schott's pseudo-second-order model was used to determine the kinetic swelling of the superabsorbent. The initial swelling rate of SAPs can be calculated using the Q∞ data acquired in the following order: SAP2 > SAP1 > SAP3 > SAP4 in distilled water and SAP1 > SAP2 > SAP3 > SAP4 in 0.9 wt% NaCl solution, respectively. The findings suggested that a small amount of citric acid introduced into the SAPs matrix could enhance the swelling rate of SAPs. The results of the cytotoxicity tests show that the extraction liquid of composite hydrogel fibers is less cytotoxic than the positive control. As well, SAP underwent in silico docking investigations on the DNA Gyrase enzyme. As the ligand is a monomer of SAP, it was a long chain of carbohydrate molecules with alcoholic groups, esters groups, and keto groups forms a strong binding interaction with DNA gyrase.

A comprehensive review on starch: Structure, modification, and applications in slow/controlled-release fertilizers in agriculture

This comprehensive review thoroughly examines starch's structure, modifications, and applications in slow/controlled-release fertilizers (SRFs) for agricultural purposes. The review begins by exploring starch's unique structure and properties, providing insights into its molecular arrangement and physicochemical characteristics. Various methods of modifying starch, including physical, chemical, and enzymatic techniques, are discussed, highlighting their ability to impart desirable properties such as controlled release and improved stability. The review then focuses on the applications of starch in the development of SRFs. It emphasizes the role of starch-based hydrogels as effective nutrient carriers, enabling their sustained release to plants over extended periods. Additionally, incorporating starch-based hydrogel nano-composites are explored, highlighting their potential in optimizing nutrient release profiles and promoting plant growth. Furthermore, the review highlights the benefits of starch-based fertilizers in enhancing plant growth and crop yield while minimizing nutrient losses. It presents case studies and field trials demonstrating starch-based formulations' efficacy in promoting sustainable agricultural practices. Overall, this review consolidates current knowledge on starch, its modifications, and its applications in SRFs, providing valuable insights into the potential of starch-based formulations to improve nutrient management, boost crop productivity, and support sustainable agriculture.

Alkaline Hydrolysis of Waste Acrylic Fibers Using the Micro-Water Method and Its Application in Drilling Fluid Gel Systems

Filtrate reducer is a drilling fluid additive that can effectively control the filtration loss of drilling fluid to ensure the safe and efficient exploitation of oilfields. It is the most widely used treatment agent in oilfields. Due to its moderate conditions and controllable procedure, alkaline hydrolysis of high-purity waste polyacrylonitrile has been utilized for decades to produce filtrate reducer on a large scale in oilfields. However, the issues of long hydrolysis time, high viscosity of semi-finished products, high drying cost, and tail gas pollution have constrained the development of the industry. In this study, low-purity waste acrylic fiber was first separated and purified using high-temperature hydroplastization, and the hydrolyzed product was obtained using alkaline hydrolysis with the micro-water method, which was called MW-HPAN. The hydrolysis reaction was characterized using X-ray diffraction, scanning electron microscopy, infrared spectroscopy, and thermogravimetric analysis, and the elemental analysis showed a hydrolysis degree of 73.21%. The experimental results showed that after aging at 180 °C for 16 h, the filtration volume of the freshwater base slurry with 0.30% dosage and 4% brine base slurry with 1.20% dosage was 12.7 mL and 18.5 mL, respectively. The microstructure and particle size analysis of the drilling fluid gel system showed that MW-HPAN could prevent the agglomeration of clay and maintain a reasonable particle size distribution even under the combined deteriorating effect of high temperature and inorganic cations, thus forming a dense filter cake and achieving a low filtrate volume of the drilling fluid gel system. Compared with similar commercially available products, MW-HPAN has better resistance to temperature and salt in drilling fluid gel systems, and the novel preparation method is promising to be extended to practical production.

Starch-based materials for drug delivery in the gastrointestinal tract-A review

Starch is a natural copolymer with unique physicochemical characteristics. Historically, it has been physically, chemically, or enzymatically modified to obtain ad-hoc functional properties for its use in different applications. In this context, the use of starch-based materials in drug delivery systems (DDSs) has gained great attention mainly because it is cheap, biodegradable, biocompatible, and renewable. This paper reviews the state of the art in starch-based materials design for their use in drug-controlled release with internal stimulus responsiveness; i.e., pH, temperature, colonic microbiota, or enzymes; specifically, those orally administered for its release in the gastrointestinal tract (GIT). Physical-chemical principles in the design of these materials taking into account their response to a particular stimulus are discussed. The relationship between the type of DDSs structure, starch modification routes, and the corresponding drug release profiles are systematically analyzed. Furthermore, the challenges and prospects of starch-based materials for their use in stimulus-responsive DDSs are also debated.

Benign electrolytic modifications of starch: effects on functional groups and physical properties

Herein, a low-cost electrolytic technology for starch modification has been developed using abundant chloride salt as a redox mediator. The effects of electrolysis conditions on the in situ starch modification are investigated in detail, including chloride concentrations, applied voltages, and electrolysis durations. The modification mechanisms are determined by the type of chlorine species (Cl2, HClO, ClO-, and HCl) generated during the process. Following electrolysis, carbonyl and carboxyl groups ranging from 0.056 to 1.3 g/100 g of starch and 0.006 to 0.5 g/100 g of starch, respectively, were observed. Starch granule median size can be reduced from 15.3 μm to 13.5 μm. In addition to the pronounced changes in granule size, shape, and functional groups, electrolysis leads to increased moisture resistance, higher crystallinity, and substantial alterations in the pasting properties.

Unveiling Optimal Synthesis and Structural Insights of Starch Ferulate via the Mechanoenzymatic Method

In this study, starch ferulate was synthesized employing a mechanoenzymatic method, specifically based on the twin screw extrusion technique and lipase catalysis. The research then primarily centered on optimizing process parameters and conducting structural analysis. Optimal conditions were determined to be 8.2% ferulic acid addition, 66 °C extrusion temperature, and 3.2% lipase (N435) addition. The enzyme-catalyzed time was 30 s. The degree of substitution for starch ferulate was quantified at 0.005581 under these specific conditions. The presence of C=O bonds in the synthesized starch ferulate proved that the synthesis process was efficient. Additionally, the crystal structure underwent reconstruction. Observations through Scanning Electron Microscopy (SEM) and Confocal Laser Scanning Microscopy (CLSM) demonstrated that the mechanoenzymatic method led to an augmentation in the specific surface area of starch molecules, thereby facilitating the exposure of active sites. This breakthrough underscores the vast potential of mechanoenzymatic techniques to revolutionize the rapid and sustainable synthesis of starch ferulate, marking a pioneering stride in ester synthesis. The insights garnered from this study transcend theory, offering a visionary roadmap for the development and real-world deployment of advanced modified starch esters.

Investigation of the effects and mechanism of incorporation of cross-linked/acetylated tapioca starches on the gel properties and in vitro digestibility of kung-wan

The effects and mechanism of incorporation of cross-linked tapioca starch (CTS) or acetylated tapioca starch (ATS) on the gel properties and in vitro digestibility of kung-wan (a Chinese-style meatball) were evaluated. The results indicated that incorporation of either CTS or ATS significantly enhanced the gel properties of kung-wan in a dose-dependent manner (P < 0.05), as well as the rheological properties of meat batter. Moreover, hydrogen bonds and electrostatic interaction were the major intermolecular forces in kung-wan when incorporated with CTS or ATS. Meanwhile, CTS and ATS acted as fillers in the meat protein gel matrix, which was further verified by the microstructure of kung-wan. However, CTS produced a more uniform and dense meat protein gel network than ATS, which was mainly due to its limited swelling characteristics. In addition, the incorporation of CTS or ATS significantly increased the in vitro digestibility of protein in kung-wan with increasing level of addition (P < 0.05). However, no significant differences in protein digestibility were detected between the CTS and ATS groups at the same addition level (P > 0.05). Our results provided some critical points for the actual application of modified tapioca starch to promote the quality profiles of kung-wan.

Customizing Starch Properties: A Review of Starch Modifications and Their Applications

Starch has been a convenient, economically important polymer with substantial applications in the food and processing industry. However, native starches present restricted applications, which hinder their industrial usage. Therefore, modification of starch is carried out to augment the positive characteristics and eliminate the limitations of the native starches. Modifications of starch can result in generating novel polymers with numerous functional and value-added properties that suit the needs of the industry. Here, we summarize the possible starch modifications in planta and outside the plant system (physical, chemical, and enzymatic) and their corresponding applications. In addition, this review will highlight the implications of each starch property adjustment.

Starch-Based Polymer Materials as Advanced Adsorbents for Sustainable Water Treatment: Current Status, Challenges, and Future Perspectives

Over the past three decades, chemical and biological water contamination has become a major concern, particularly in the industrialized world. Heavy metals, aromatic compounds, and dyes are among the harmful substances that contribute to water pollution, which jeopardies the human health. For this reason, it is of the utmost importance to locate methods for the cleanup of wastewater that are not genuinely effective. Owing to its non-toxicity, biodegradability, and biocompatibility, starch is a naturally occurring polysaccharide that scientists are looking into as a possible environmentally friendly material for sustainable water remediation. Starch could exhibit significant adsorption capabilities towards pollutants with the substitution of amide, amino, carboxyl, and other functional groups for hydroxyl groups. Starch derivatives may effectively remove contaminants such as oil, organic solvents, pesticides, heavy metals, dyes, and pharmaceutical pollutants by employing adsorption techniques at a rate greater than 90%. The maximal adsorption capacities of starch-based adsorbents for oil and organic solvents, pesticides, heavy metal ions, dyes, and pharmaceuticals are 13,000, 66, 2000, 25,000, and 782 mg/g, respectively. Although starch-based adsorbents have demonstrated a promising future for environmental wastewater treatment, additional research is required to optimize the technique before the starch-based adsorbent can be used in large-scale in situ wastewater treatment.

Debranching facilitates malate esterification of waxy maize starch and decreases the digestibility

In this study, the debranching followed by malate esterification was employed to prepare malate debranched waxy maize starch (MA-DBS) with a high degree of substitution (DS) and low digestibility using malate waxy maize starch (MA-WMS) as the control. The optimal esterification conditions were obtained using an orthogonal experiment. Under this condition, the DS of MA-DBS (0.866) was much higher than that of MA-WMS (0.523). A new absorption peak was generated at 1757 cm^-1 in the infrared spectra, indicating the occurrence of malate esterification. Compared with MA-WMS, MA-DBS had more particle aggregation, resulting in an increase in the average particle size from scanning electron microscopy and particle size analysis. The X-ray diffraction results showed that the relative crystallinity decreased after malate esterification, in which the crystalline structure of MA-DBS almost disappeared, which was consistent with the decrease of decomposition temperature by thermogravimetric analysis and the disappearance of the endothermic peak by differential scanning calorimeter. In vitro digestibility tests showed an order: WMS > DBS > MA-WMS > MA-DBS. The MA-DBS showed the highest content of resistant starch (RS) of 95.77 % and the lowest estimated glycemic index of 42.27. In a word, pullulanase debranching could produce more short amylose, promoting malate esterification and improving the DS. The presence of more malate groups inhibited the formation of starch crystals, increased particle aggregation, and enhanced resistance to enzymolysis. The present study provides a novel protocol for producing modified starch with higher RS content, which has potential application in functional foods with a low glycemic index.

Polysaccharides and lipoproteins as reactants for the synthesis of pharmaceutically important scaffolds: A review

The growing number of diseases in the past decade has once again highlighted the need for extensive research on the development of novel drugs. There has been a major expansion in the number of people suffering from malignant diseases and types of life-threatening microbial infections. The high mortality rates caused by such infections, their associated toxicity, and a growing number of microbes with acquired resistance necessitate the need to further explore and develop the synthesis of pharmaceutically important scaffolds. Chemical entities derived from biological macromolecules like carbohydrates and lipids have been explored and observed to be effective agents in the treatment of microbial infections and diseases. These biological macromolecules offer a variety of chemical properties that have been exploited for the synthesis of pharmaceutically relevant scaffolds. All biological macromolecules are long chains of similar atomic groups which are connected by covalent bonds. By altering the attached groups, the physical and chemical properties can be altered and molded as per the clinical applications and needs, this ring them potential candidates for drug synthesis. The present review establishes the role and significance of biological macromolecules by articulating various reactions and pathways reported in the literature.

Essential characteristics improvement of metallic nanoparticles loaded carbohydrate polymeric films - A review

Petroleum-based films have contributed immensely to various environmental issues. Developing green-based films from carbohydrate polymers is crucial for addressing the harms encountered. However, some limitations exist on their property, processibility, and applicability that prohibit their processing for further developments. This review discusses the potential carbohydrate polymers and their sources, film preparation methods, such as solvent-casting, tape-casting, extrusion, and thermo-mechanical compressions for green-based films using various biological polymers with their merits and demerits. Research outcomes revealed that the essential characteristics improvement achieved by incorporating different metallic nanoparticles has significantly reformed the properties of biofilms, including crystallization, mechanical stability, thermal stability, barrier function, and antimicrobial activity. The property-enhanced bio-based films made with nanoparticles are potentially interested in replacing fossil-based films in various areas, including food-packaging applications. The review paves a new way for the commercial use of numerous carbohydrate polymers to help maintain a sustainable green environment.

Cationic modification of cellulose as a sustainable and recyclable adsorbent for anionic dyes

There is a dire need to find an efficient, cost-effective, sustainable, and environment-friendly adsorbent for the removal of anionic pollutants such as dyes from waste effluent. In this work, a cellulose-based cationic adsorbent was designed and utilized for methyl orange and reactive black 5 anionic dyes adsorption from an aqueous medium. Solid-state nuclear magnetic resonance spectroscopy (NMR) revealed the successful modification of cellulose fibers, and dynamic light scattering (DLS) evaluations showed the levels of charge densities. Furthermore, various models for adsorption equilibrium isotherm were utilized to understand the adsorbent characteristics, with the Freundlich isotherm model providing an excellent fit for the experimental results. The modelled maximum adsorption capacity was as much as 1010 mg/g for both model dyes. The dye adsorption was also confirmed using EDX. It was noted that the dyes were chemically adsorbed through the ionic interaction that can be reversed using sodium chloride solution. Overall, the cationized cellulose is inexpensive, environment-friendly, nature-driven, and recyclable making it an appealing adsorbent feasible for the dye removal from textile wastewater effluent.

Starch-based controlled release fertilizers: A review

Starch, as a widely available renewable resource, has the potential to be used in the production of controlled-release fertilizers (CRFs) that support sustainable agriculture. These CRFs can be formed by incorporating nutrients through coating or absorption, or by chemically modifying the starch to enhance its ability to carry and interact with nutrients. This review examines the various methods of creating starch-based CRFs, including coating, chemical modification, and grafting with other polymers. In addition, the mechanisms of controlled release in starch-based CRFs are discussed. Overall, the potential benefits of using starch-based CRFs in terms of resource efficiency and environmental protection are highlighted.

Bio-nanocomposites films based on unmodified and modified thermoplastic starch reinforced with chemically modified nanoclays

The use of polymers capable of being degraded by the action of microorganisms and/or enzymes without causing harmful effects is a strategy in waste management and environmental care. In this work, bio-nanocomposites based on thermoplastic starch (TPS) were synthesized by reactive extrusion using a twin-screw extruder. Two strategies were evaluated to reduce the disadvantages of TPS for packaging applications. First, starch was chemically modified producing the reaction of native starch with chemical reagents that introduce new functional groups to reduce the water adsorption. And two, nano-fillers were incorporated into TPS in order to enhance the mechanical and barrier properties, driving to materials with improved performance/cost ratio. The synergistic strategies of chemical modification and incorporation of modified nanoclays were also effective to reduce the dependence of properties of TPS with the environment humidity and the evolution thereof over time, which influences the performance during the service life of the product.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s10853-023-08354-1.

Characterization of chestnut starch acetate with different degrees of substitution

Chestnut starch acetates (CSA) with different degrees of substitution (DS) were prepared. The structure and physicochemical properties of CSA were then determined, with scanning electron microscopy showing that most of the CSA granules were damaged and dented, and adhered with increased in DS. X-ray diffraction results indicated that the crystal form of CS and CSA was type C. Chemical structure analysis showed that the starch molecule was grafted with acetyl groups. The transparency, freeze–thaw stability, solubility and swelling power of CSA improved with an increase in DS. The viscosity and stability of CSA were significantly improved and pasting temperatures reduced compared with native CS. The cohesion, hardness, gumminess, chewiness and springiness of CSA decreased with an increase in DS, whereas adhesiveness increased. By comparing the properties of CSA with different DS, a new option was provided for the application of renewable natural polymer CSA in food fields.

Effect of single and dual modifications with cross-linking and octenylsuccinylation on physicochemical, in-vitro digestibility, and emulsifying properties of cassava starch

Native cassava starch (NCS) was chemically modified by cross-linking (CL), octenylsuccinylation (OS), CL followed by OS, and OS followed by CL. The modified cassava starches (MCS) were determined for physicochemical, in-vitro digestibility, and emulsifying properties. For the dual modifications, the functional groups introduced in the first modification were partially replaced by the ones that introduced in the second modification. The X-ray diffraction pattern and relative crystallinity of cassava starch did not change by both modifications, indicating that both reactions occurred predominantly in amorphous regions as well as on the surface of starch granules and did not alter the crystalline pattern in the granules. The physicochemical and emulsifying properties of the dual MCS were predominantly affected by the functional groups introduced in the second modification. For the in-vitro digestibility, the dual MCS exhibited the highest resistant starch content of 19.48-22.00% in comparison with the NCS (6.05%) and the single MCS (10.76-14.49%), possibly due to a synergistic effect of the functional groups introduced in the first and second modifications.

Advancement in "Garbage In Biomaterials Out (GIBO)" concept to develop biomaterials from agricultural waste for tissue engineering and biomedical applications

Presently on a global scale, one of the major concerns is to find effective strategies to manage the agricultural waste to protect the environment. One strategy that has been drawing attention among the researchers is the development of biocompatible materials from agricultural waste. This strategy implies successful conversion of agricultural waste products (e.g.: cellulose, eggshell etc.) into building blocks for biomaterial development. Some of these wastes contain even bioactive compounds having biomedical applications. The replacement and augmentation of human tissue with biomaterials as alternative to traditional method not only bypasses immune-rejection, donor scarcity, and maintenance; but also provides long term solution to damaged or malfunctioning organs. Biomaterials development as one of the key challenges in tissue engineering approach, resourced from natural origin imparts better biocompatibility due to closely mimicking composition with cellular microenvironment. The "Garbage In, Biomaterials Out (GIBO)" concept, not only recycles the agricultural wastes, but also adds to biomaterial raw products for further product development in tissue regeneration. This paper reviews the conversion of garbage agricultural by-products to the biocompatible materials for various biomedical applications.

Graphical abstract

The agro-waste biomass processed, purified, modified, and further utilized for the fabrication of biomaterials-based support system for tissue engineering applications to grow living body parts in vitro or in vivo.

Synthesis of Al/starch co-doped in CaO nanoparticles for enhanced catalytic and antimicrobial activities: experimental and DFT approaches

In this work, aluminum/starch (St)-doped CaO nanoparticles (NPs) were synthesized by a co-precipitation method to degrade harmful dyes in various pH media. Systematic characterization was performed to investigate the influence of Al/St dopants on the composition, crystal structure, functional groups present, optical characteristics, and morphology of CaO NPs. Further hybrid density functional analyses corroborated that the band gap energy was reduced as the Al concentration in starch-doped CaO is increased. Optical absorption spectra of the synthesized materials revealed a redshift upon doping, which indicated depletion in the band gap energy of Al/St-doped CaO. PL spectroscopy showed that the intensity of CaO was reduced by the incorporation of Al and St assigned to minimum electron-hole pair recombination. Interlayer spacing and morphological features were determined by HR-TEM. HRTEM revealed that the control sample has cubic NPs and the incorporation of St showed overlapping around agglomerated NPs. The d-spacing of CaO was little enhanced by the inclusion of dopants. Experimental outcomes indicated that the addition of Co-dopants improved the catalytic potential of CaO NPs. Al (4%)/St-doped CaO NPs expressed a significant reduction of methylene blue in a basic environment. The maximum bactericidal performance was observed as 10.25 mm and 4.95 mm in the inhibition zone against S. aureus and E. coli, respectively, after the addition of Al and St in CaO.

Nb/Starch-Doped ZnO Nanostructures for Polluted Water Treatment and Antimicrobial Applications: Molecular Docking Analysis

Nb/starch-doped ZnO quantum dots (QDs) were prepared by a coprecipitation route. A fixed quantity of starch (st) and different concentrations (2 and 4%) of niobium (Nb) were doped in a ZnO lattice. To gain a better understanding of synthesized nanostructures, a systematic study was carried out utilizing several characterization methods. The goal of this research was to undertake methylene blue (MB) dye degradation with a synthetic material and also study its antibacterial properties. The phase structure, morphology, functional groups, optical properties, and elemental compositions of synthesized samples were investigated. Our study showed that ZnO QDs enhanced photocatalytic activity (PCA), resulting in effective MB degradation, in addition to showing good antimicrobial activity against Gram-negative relative to Gram-positive bacteria. Molecular docking study findings were in good agreement with the observed in vitro bactericidal potential and suggested ZnO, st-ZnO, and Nb/st-ZnO as possible inhibitors against dihydrofolate reductase (DHFR_E. coli) and DNA gyrase_E. coli.

Towards the Hydrophobization of Thermoplastic Starch Using Fatty Acid Starch Ester as Additive

To bring surface hydrophobicity to thermoplastic starch (TPS) materials for food packaging, fatty acid starch esters (FASE), specifically starch tri-laurate, were incorporated into TPS formulations. A total of three different ratios of FASE (2%, 5% and 10%) were added to the TPS formulation to evaluate the influence of FASE onto physico-chemical properties of TPS/FASE blends, i.e., surface hydrophobicity, dynamic vapor sorption (DVS), and tensile behaviors. Blending TPS with FASE leads to more hydrophobic materials, whatever the FASE ratio, with initially measured contact angles ranging from 90° for the 2%-FASE blend to 99° for the 10%-blend. FT-IR study of the material surface and inner core shows that FASE is mainly located at the material surface, justifying the increase of material surface hydrophobicity. Despite this surface hydrophobicity, blending TPS with FASE seems not to affect blend vapor sorption behavior. From a mechanical behavior perspective, the variability of tensile properties of starch-based materials with humidity rate is slightly reduced with increasing FASE ratio (a decrease of maximal stress of 10–30% was observed for FASE ratio 2% and 10%), leading to more ductile materials.

Biomass-based hydrogels with high ductility, self-adhesion and conductivity inspired by starch paste for strain sensing

Currently, hydrogel sensors for health monitoring require external tapes, bandages or adhesives to immobilize them on the surface of human skin. However, these external fixation methods easily lead to skin allergic reactions and the decline of monitoring accuracy. A simple strategy to solve this problem is to endow hydrogel sensors with good adhesion. Inspired by the starch paste adhesion mechanism, a biomass-based hydrogel with good conductivity and high repetitive adhesion strength was prepared by introducing modified starch into polyacrylic acid hydrogel system. The properties of biomass-based hydrogels could be controlled by changing the proportion of amylose and amylopectin. The biomass-based hydrogel exhibited a variety of excellent properties, including good stretchability (1290 %), high adhesion strength (pig skin: 46.51 kPa) and conductivity (2.3 S/m). Noticeably, the repeated adhesive strength of biomass-based hydrogel did not decrease with the increase of adhesion times. The strain sensor based on the biomass-based hydrogel could accurately monitor the large-scale and small movements of the human body, and had broad application prospects in the field of flexible wearable devices.

Recent advances and future prospects of cellulose, starch, chitosan, polylactic acid and polyhydroxyalkanoates for sustainable food packaging applications

Cellulose, starch, chitosan, polylactic acid, and polyhydroxyalkanoates are seen as promising alternatives to conventional plastics in food packaging. However, the application of these biopolymers in the food packaging industry on a commercial scale is limited due to their poor performance and processing characteristics and high production cost. This review aims to provide an insight into the recent advances in research that address these limitations. Loading of nanofillers into polymer matrix could improve thermal, mechanical, and barrier properties of biopolymers. Blending of biopolymers also offers the possibility of acquiring newer materials with desired characteristics. However, nanofillers tend to agglomerate when loaded above an optimum level in the polymer matrix. This article throws light on different methods adopted by researchers to achieve uniform dispersion of nanofillers in bionanocomposites. Furthermore, different processing methods available for converting biopolymers into different packaging forms are discussed. In addition, the potential utilization of agricultural, brewery, and industrial wastes as feedstock for the production of biopolymers, and integrated biorefinery concept that not only keep the total production cost of biopolymers low but are also environment-friendly, are discussed. Finally, future research prospects in this field and the possible contribution of biopolymers to sustainable development are presented. This review will certainly be helpful to researchers working on sustainable food packaging, and companies exploring pilot projects to scale up biopolymer production for industrial applications.

Hydrogel Beads of Amidoximated Starch and Chitosan as Efficient Sorbents for Inorganic and Organic Compounds

The synthesis of hydrogel beads involving natural polymers is, nowadays, a leading research area. Among natural polymers, starch and chitosan represent two biomolecules with proof of efficiency and low economic impact in various utilization fields. Therefore, herein, the features of hydrogel beads obtained from chitosan and three sorts of starch (potato, wheat and rise starches), grafted with acrylonitrile and then amidoximated, were deeply investigated for their use as sorbents for heavy metal ions and dyes. The hydrogel beads were prepared by ionotropic gelation/covalent cross-linking of chitosan and functionalized starches. The chemical structure of the hydrogel beads was analyzed by FT-IR spectroscopy; their morphology was revealed by optical and scanning electron microscopies, while the influence of the starch functionalization strategies on the crystallinity changes was evaluated by X-ray diffraction. Molecular dynamics simulations were used to reveal the influence of the grafting reactions and grafted structure on the starch conformation in solution and their interactions with chitosan. The sorption capacity of the hydrogel beads was tested in batch experiments, as a function of the beads’ features (synthesis protocol, starch sort) and simulated polluted water, which included heavy metal ions (Cu²⁺, Co²⁺, Ni²⁺ and Zn²⁺) and small organic molecules (Direct Blue 15 and Congo red).

Chemical modification of waxy maize starch by esterification with saturated fatty acid chlorides: Synthesis, physicochemical and emulsifying properties

In the current study, the physicochemical and emulsifying properties of modified waxy maize starch obtained through a new environmentally friendly method of esterification were evaluated. The starch modification was carried out in NaOH solution with different levels of octanoyl, myristoyl, and stearoyl chlorides. Increasing the fatty acid chlorides concentration led to the degree of substitution increment, while reaction efficiency and yield decreased. Based on fourier transform infrared spectroscopy results, the presence of two new bands of carbonyl (1740-1750 cm^-1) and carboxyl (1570 cm^-1) groups in the ester bond confirmed the successful starch esterification process. The level of 0.1 mL fatty acid chlorides/g of starch demonstrated the highest emulsifying properties. Upon esterification, the crystalline structure of amylopectin was destroyed, indicating no gelatinization features. Therefore, using the fatty acid chlorides in an alkaline condition could be suggested as a feasible way to modify waxy maize starch toward hydrophobicity increment with desirable properties.

Development of Starch-Based Materials Using Current Modification Techniques and Their Applications: A Review

Starch is one of the most common biodegradable polymers found in nature, and it is widely utilized in the food and beverage, bioplastic industry, paper industry, textile, and biofuel industries. Starch has received significant attention due to its environmental benignity, easy fabrication, relative abundance, non-toxicity, and biodegradability. However, native starch cannot be directly used due to its poor thermo-mechanical properties and higher water absorptivity. Therefore, native starch needs to be modified before its use. Major starch modification techniques include genetic, enzymatic, physical, and chemical. Among those, chemical modification techniques are widely employed in industries. This review presents comprehensive coverage of chemical starch modification techniques and genetic, enzymatic, and physical methods developed over the past few years. In addition, the current applications of chemically modified starch in the fields of packaging, adhesives, pharmaceuticals, agriculture, superabsorbent and wastewater treatment have also been discussed.

LBL generated fire retardant nanocomposites on cotton fabric using cationized starch-clay-nanoparticles matrix

In this work, starch-clay-TiO₂-based nanocomposites were deposited on cotton fabric through layer-by-layer (LBL) process and their effect on the flame retardancy, inhibition of pyrolysis and combustion processes were discussed in details. Polyelectrolyte solutions/suspensions of cationized starch and VMT (vermiculite)/TiO₂ nanoparticles were used to deposit these nanocomposites in the form of multi-layered coatings (5, 7, 10 and 15 bilayers). Uniform fabric coverage and presence of electrolytes was imaged by scanning electron microcopy (LV-SEM), attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) and EDX characterizations. The greatest pyrolysis reduction was found for the StVT-7 sample (7 bilayers); ~30% and 21%, based on microscale combustion calorimetry (MCC) and thermogravimetric analysis (TGA). When using MCC, the improved values of the PHRR ~ 193 W/g, THR ~ 10.7 kJ/g), HRC ~ 390 J/g∙K and LOI ~ 22.2% were found for the StVT-7 sample which was strongly supported by the UL-94 test.