Formation and toxicity of brominated disinfection byproducts during chlorination and chloramination of water: a review

Impact of ozonation on disinfection byproducts formation from phenylalanine during chlorination

As a strong oxidizing agent, ozone is used in some water treatment facilities for disinfection, taste and odor control, and removal of organic micropollutants. Phenylalanine (Phe) was used as the target amino acid to comprehensively investigate variability of disinfection byproducts (DBPs) formation during chlorine disinfection and residual chlorine conditions subsequent to ozonation. The results showed that subsequent to ozonation, the typical regulated and unregulated DBPs formation potential (DBPsFP), including trichloromethane (TCM), dichloroacetonitrile (DCAN), chloral hydrate (CH), dichloroacetic acid (DCAA), trichloroacetic acid (TCAA), and trichloroacetamide (TCAcAm) increased substantially, by 2.4, 3.3, 5.6, 1.2, 2.5, and 6.0 times, respectively, compared with only chlorination. Ozonation also significantly increased the DBPs yield under a 2 day simulated residual chlorine condition that mimicked the water distribution system. DBPs formations followed pseudo first order kinetics. The formation rates of DBPs in the first 6 hr were higher for TCM (0.214 hr-1), DCAN (0.244 hr-1), CH (0.105 hr-1), TCAcAm (0.234 hr-1), DCAA (0.375 hr-1) and TCAA (0.190 hr-1) than thereafter. The peak DBPsFP of TCM, DCAN, CH, TCAcAm, DCAA, and TCAA were obtained when that ozonation time was set at 5-15 min. Ozonation times > 30 min increased the mineralization of Phe and decreased the formation of DBPs upon chlorination. Increasing bromine ion (Br-) concentration increased production of bromine- DBPs and decreased chlorine-DBPs formation by 59.3%-92.2% . Higher ozone dosages and slight alkaline favored to reduce DBP formation and cytotoxicity. The ozonation conditions should be optimized for all application purposes including DBPs reduction.

Formation, speciation, and temporal variability of DBPs in drinking water distribution systems in the context of ASR operations and extended storage periods

As climate change induces changes in water quality and available water quantity of drinking water supply sources, the final product water quality changes in terms of trace organics including disinfection byproducts (DBPs) formed during water treatment. In this study, the seasonal variability and speciation of DBPs across nine sample sites within a drinking water distribution system serving ∼400k people over a one-year period was investigated considering the governing parameters of water quality and treatment/transport/storage of finished water. The system considered treats surface water from a river and practices aquifer storage and recovery to address seasons water availability changes. Eighty-eight (88) sample sets were collected and held for 6-months in the laboratory to simulate extended storage scenarios associated with ASR operations, and each was analyzed at 9 different timesteps for concentration and speciation of chlorinated DBPs. Samples from groundwater influenced sites exhibited significantly lower total organic carbon (TOC) compared to other sites from the river source, and also were observed to have the lowest DBP formation. Three sites exceeded the Maximum Contaminant Level (MCL) for four total trihalomethanes (THM4) within 30-60 days of storage. Chloroform was the predominant THM4 species, even in groundwater-influenced locations, whereas di- and tri-chloroacetic acid (DCA and TCA) were the most prevalent haloacetic acids (HAA5). Extended water age at one site, coupled with low initial chlorine concentrations exhibited higher initial THM4 concentrations and flat DBP formation curves. The study results provide new insights into DBP occurrence and fate in drinking water distribution systems which consider water storage such as in ASR.

Formation potential of disinfection byproducts during chlorination of petroleum hydrocarbon-contaminated drinking water

Recent leaks of underground fuel storage tanks in the Pearl Harbor region have led to direct release of un-weathered petroleum hydrocarbons (PHCs) into drinking water sources, which then directly underwent chlorination disinfection treatment. Since the control of disinfection byproducts (DBPs) traditionally focuses natural organic matters (NOM) from source water and little is known about the interactions between free chlorine and un-weathered PHCs, laboratory chlorination experiments in batch reactors were conducted to determine the formation potential of DBPs during chlorination of PHC-contaminated drinking water. Quantitative analysis of regulated DBPs showed that significant quantities of THM4 (average 3,498 μg/L) and HAA5 (average 355.4 μg/L) compounds were formed as the result of chlorination of un-weathered PHCs. Amongst the regulated DBPs, THM4, which were comprised primarily of chloroform and bromodichloromethane, were more abundant than HAA5. Numerous unregulated DBPs and a large diversity of unidentified potentially halogenated organic compounds were also produced, with the most abundant being 1,1-dichloroacetone, 1,2-dibromo-3-chloropropane, chloropicrin, dichloroacetonitrile, and trichloracetonitrile. Together, the results demonstrated the DBP formation potential when PHC-contaminated water undergoes chlorination treatment. Further studies are needed to confirm the regulated DBP production and health risks under field relevant conditions.

Trihalomethanes in global drinking water: Distributions, risk assessments, and attributable disease burden of bladder cancer

This study aimed to assess the global spatiotemporal variations of trihalomethanes (THMs) in drinking water, evaluate their cancer and non-cancer risks, and THM-attributable bladder cancer burden. THM concentrations in drinking water around fifty years on a global scale were integrated. Health risks were assessed using Monte Carlo simulations and attributable bladder cancer burden was estimated by comparative risk assessment methodology. The results showed that global mean THM concentrations in drinking water significantly decreased from 78.37 μg/L (1973-1983) to 51.99 μg/L (1984-2004) and to 21.90 μg/L (after 2004). The lifestage-integrative cancer risk and hazard index of THMs through all exposure pathways were acceptable with the average level of 6.45 × 10-5 and 7.63 × 10-2, respectively. The global attributable disability adjusted of life years (DALYs) and the age-standardized DALYs rate (ASDR) dropped by 16% and 56% from 1990-1994 to 2015-2019, respectively. A big decline in the attributable ASDR was observed in the United Kingdom (62%) and the United States (27%), while China experienced a nearly 3-fold increase due to the expanded water supply coverage and increased life expectancy. However, China also benefited from the spread of chlorination, which helped reduce nearly 90% of unsafe-water-caused mortality from 1998 to 2018.

Assessing the Health Impact of Disinfection Byproducts in Drinking Water

This study provides a comprehensive investigation of the impact of disinfection byproducts (DBPs) on human health, with a particular focus on DBPs present in chlorinated drinking water, concentrating on three primary DBP categories (aliphatic, alicyclic, and aromatic). Additionally, it explores pivotal factors influencing DBP formation, encompassing disinfectant types, water source characteristics, and environmental conditions, such as the presence of natural materials in water. The main objective is to discern the most hazardous DBPs, considering criteria such as regulation standards, potential health impacts, and chemical diversity. It provides a catalog of 63 key DBPs alongside their corresponding parameters. From this set, 28 compounds are meticulously chosen for in-depth analysis based on the above criteria. The findings strive to guide the advancement of water treatment technologies and intelligent sensory systems for the efficient water quality surveillance. This, in turn, enables reliable DBP detection within water distribution networks. By enriching the understanding of DBP-associated health hazards and offering valuable insights, this research is aimed to contribute to influencing policy-making in regulations and treatment strategies, thereby protecting public health and improving safety related to chlorinated drinking water quality.

Effects of ozone dose on brominated DBPs in subsequent chlor(am)ination: A comprehensive study of aliphatic, alicyclic and aromatic DBPs

Ozone‒chlor(am)ine is a commonly used combination of disinfectants in drinking water treatment. Although there are quite a few studies on the formation of some individual DBPs in the ozone‒chlor(am)ine disinfection, an overall picture of the DBP formation in the combined disinfection is largely unavailable. In this study, the effects of ozone dose on the formation and speciation of organic brominated disinfection byproducts (DBPs) in subsequent chlorination, chloramination, or chlorination‒chloramination of simulated drinking water were investigated. High-molecular-weight, aliphatic, alicyclic and aromatic brominated DBPs were selectively detected and studied using a powerful precursor ion scan method with ultra performance liquid chromatography/electrospray ionization triple quadrupole mass spectrometry (UPLC/ESI-tqMS). Two groups of unregulated yet relatively toxic DBPs, dihalonitromethanes and dihaloacetaldehydes, were detected by the UPLC/ESI-tqMS for the first time. With increasing ozone dose, the levels of high-molecular-weight (m/z 300-500) and alicyclic and aromatic brominated DBPs generally decreased, the levels of brominated aliphatic acids were slightly affected, and the levels of dihalonitromethanes and dihaloacetaldehydes generally increased in the subsequent disinfection processes. Despite different molecular compositions of the detected DBPs, increasing ozone dose generally shifted the formation of DBPs from chlorinated ones to brominated analogues in the subsequent disinfection processes. This study provided a comprehensive analysis of the impact of ozone dose on the DBP formation and speciation in subsequent chlor(am)ine disinfection.

Fluorescence spectroscopy in the detection and management of disinfection by-product precursors in drinking water treatment processes: A review

Monitoring and prevention of the formation of disinfection by-products (DBPs) is paramount in drinking water treatment plants (DWTP) to ensure human health safety. This review provides an overview of how fluorescence techniques are developed to predict DBP formation and to evaluate the reduction of fluorescence components and DBPs following individual DWTP processes. Evidence has shown that common DBPs, nitrogenous DBPs and specific emerging DBPs exhibit positive linear relationships with terrestrial, anthropogenic, tryptophan-like, and eutrophic humic-like fluorescence. Due to the interrelationships of both regulated and emerging DBP types with fluorescence components, the limitations arise when attempting to predict emerging DBPs solely through linear relationships. Monitoring the reduction of DBP precursors after each treatment process can be achieved by studying the relationship between fluorescence components and DBPs. During the coagulation process, highest reduction rates are observed for terrestrial humic-like fluorescence. Advanced treatments such as granular, powdered, silver-impregnated activated carbon, magnetic ion exchange resins, and reverse osmosis, have revealed a significant reduction of fluorescent DBP precursors, ranging from 53% to 100%. During chlorination, the reduction rate follows the order: terrestrial humic-like > microbial humic-like > protein/tryptophan-like fluorescence. This review provides insights into the reduction of fluorescence signatures following individual DWTP processes, which offers information regarding DBP formation. These insights could assist in optimizing the treatment process to more effectively manage DBP formation. For the identification of emerging DBP generation, the utilization of advanced models is imperative to precisely predict emerging DBPs and to more accurately trace DBP precursors within DWTPs.

Optimizing Ozone Disinfection in Water Reuse: Controlling Bromate Formation and Enhancing Trace Organic Contaminant Oxidation

The use of ozone/biofiltration advanced treatment has become more prevalent in recent years, with many utilities seeking an alternative to membrane/RO based treatment for water reuse. Ensuring efficient pathogen reduction while controlling disinfection byproducts and maximizing oxidation of trace organic contaminants remains a major barrier to implementing ozone in reuse applications. Navigating these challenges is imperative in order to allow for the more widespread application of ozonation. Here, we demonstrate the effectiveness of ozone for virus, coliform bacteria, and spore forming bacteria inactivation in unfiltered secondary effluent, all the while controlling the disinfection byproduct bromate. A greater than 6-log reduction of both male specific and somatic coliphages was seen at specific ozone doses as low as 0.75 O3:TOC. This study compared monochloramine and hydrogen peroxide as chemical bromate control measures in high bromide water (Br- = 0.35 ± 0.07 mg/L). On average, monochloramine and hydrogen peroxide resulted in an 80% and 36% decrease of bromate formation, respectively. Neither bromate control method had any appreciable impact on virus or coliform bacteria disinfection by ozone; however, the use of hydrogen peroxide would require a non-Ct disinfection framework. Maintaining ozone residual was shown to be critical for achieving disinfection of more resilient microorganisms, such as spore forming bacteria. While extremely effective at controlling bromate, monochloramine was shown to inhibit TrOC oxidation, whereas hydrogen peroxide enhanced TrOC oxidation.

Inhibition of bromate formation in plasmon-enhanced catalytic ozonation over silver-doped spinel ferrite

High energy consumption and formation of harmful byproducts are two challenges faced by advanced oxidation processes (AOPs). While much research efforts have been devoted to improving the treatment efficiency, byproduct formation and control calls for more attention. In this study, the underlying mechanism of bromate formation inhibition during a novel plasmon-enhanced catalytic ozonation process with silver-doped spinel ferrite (0.5wt%Ag/MnFe2O4) as the catalysts was investigated. By scrutinizing the effects of each factor (i.e. irradiation, catalyst, ozone) as well as the combinations of different factors on major Br species involved in bromate formation, examining the distribution of Br species, and probing the reactive oxygen species partaking in the reactions, it was found that accelerated ozone decomposition which inhibited two main bromate formation pathways and surface reduction of Br species (e.g. HOBr/OBr- and BrO3-) contributed to the inhibition of bromate formation, both of which can be enhanced by the plasmonic effects of Ag and the good affinity between Ag and Br. A kinetic model was developed by simultaneously solving 95 reactions to predict the aqueous concentrations of Br species during different ozonation processes. The good agreement between the model prediction and experimental data further corroborated the hypothesized reaction mechanism.

Viral inactivation using microwave-enhanced membrane filtration

Pathogenic viruses (e.g., Enteroviruses, Noroviruses, Rotaviruses, and Adenovirus) present in wastewater, even at low concentrations, can cause serious waterborne diseases. Improving water treatment to enhance viral removal is of paramount significance, especially given the COVID-19 pandemic. This study incorporated microwave-enabled catalysis into membrane filtration and evaluated viral removal using a model bacteriophage (MS2) as a surrogate. Microwave irradiation effectively penetrated the PTFE membrane module and enabled surface oxidation reactions on the membrane-coated catalysts (i.e., BiFeO₃), which thus elicited strong germicidal effects via local heating and radical formation as reported previously. A log removal of 2.6 was achieved for MS2 within a contact time as low as 20 s using 125-W microwave irradiation with the initial MS2 concentration of 10⁵ PFU∙mL^-1. By contrast, almost no inactivation could be achieved without microwave irradiation. COMSOL simulation indicates that the catalyst surface could be heated up to 305 ^oC with 125-W microwave irradiation for 20 s and also analyzed microwave penetration into catalyst or water film layers. This research provides new insights to the antiviral mechanisms of this microwave-enabled catalytic membrane filtration.

Formation and speciation of hazardous trihalomethanes and haloacetic acids during chlorinated washing of brined kimchi cabbage in the presence of bromide

Brominated disinfection byproducts (Br-DBPs) may be generated in high concentrations during the chlorinated washing of brined kimchi cabbage (BKC) in kimchi manufacturing. However, the generation of these DBPs is not sufficiently understood. Therefore, in this study, we investigated the formation and speciation of the DBPs trihalomethanes (THMs) and haloacetic acids (HAAs) during the chlorinated washing process. The average bromide content in 22 salt products sourced from various regions of Korea was 1600 ± 468 mg/kg. Increasing bromide content shifted the speciation of DBPs from chlorinated to mixed bromochloro to brominated species, which would be more harmful than their chlorinated analogs. DBP formation during the washing of BKC at average bromide levels changed based on the brine salinity, salting temperature, and disinfectant type. Based on our findings, we recommend that low salinity and low temperature should be maintained during the salting of KC and that NaOCl should be used as the disinfectant rather than slightly acidic electrolyzed water during the chlorinated washing of KC to alleviate the formation of Br-DBPs. Moreover, we recommend the use of salts with low bromide levels for the salting of KC and the addition of a rinse step after chlorinated washing.

Formation of disinfection by-products from microplastics, tire wear particles, and other polymer-based materials

Disinfection by-products (DBPs) are formed through the disinfection of water containing precursors such as natural organic matter or anthropogenic compounds (e.g., pharmaceuticals and pesticides). Due to the ever increasing use of plastics, elastomers, and other polymers in our daily lives, polymer-based materials (PBMs) are detected more frequently and at higher concentrations in water and wastewater. The present review provides a comprehensive and systematic analysis of the contribution of PBMs - including elastomers, tire waste, polyelectrolytes, and microplastics - as precursors of DBPs in water and wastewater. Literature shows that the presence of PBMs can lead to the leaching of dissolved organic matter (DOM) and subsequent formation of DBPs upon disinfection in aqueous media. The quantity and type of DBPs formed strongly depends on the type of polymer, its concentration, its age, water salinity, and disinfection conditions such as oxidant dosage, pH, temperature, and contact time. DOM leaching from elastomers and tire waste was shown to form N-nitrosodimethylamine up to concerning levels of 930 ng/L and 466,715 ng/L, respectively upon chemical disinfection under laboratory conditions. Polyelectrolytes can also react with chemical disinfectants to form toxic DBPs. Recent findings indicate trihalomethanes formation potential of plastics can be as high as 15,990 µg/L based on the maximum formation potential under extreme conditions. Our analysis highlights an overlooked contribution of DOM leaching from PBMs as DBP precursors during disinfection of water and wastewater. Further studies need to be conducted to ascertain the extent of this contribution in real water and wastewater treatment plants.

Stimuli-Activable Metal-Bearing Nanomaterials and Precise On-Demand Antibacterial Strategies

Bacterial infections remain the leading cause of death worldwide today. The emergence of antibiotic resistance has urged the development of alternative antibacterial technologies to complement or replace traditional antibiotic treatments. In this regard, metal nanomaterials have attracted great attention for their controllable antibacterial functions that are less prone to resistance. This review discusses a particular family of stimuli-activable metal-bearing nanomaterials (denoted as SAMNs) and the associated on-demand antibacterial strategies. The various SAMN-enabled antibacterial strategies stem from basic light and magnet activation, with the addition of bacterial microenvironment responsiveness and/or bacteria-targeting selectivity and therefore offer higher spatiotemporal controllability. The discussion focuses on nanomaterial design principles, antibacterial mechanisms, and antibacterial performance, as well as emerging applications that desire on-demand and selective activation (i.e., medical antibacterial treatments, surface anti-biofilm, water disinfection, and wearable antibacterial materials). The review concludes with the authors' perspectives on the challenges and future directions for developing industrial translatable next-generation antibacterial strategies.

Enhanced Permanganate Activation under UVA-LED Irradiation: Unraveled Mechanism Involving Manganese Species and Hydroxyl Radical

Permanganate [Mn(VII)] has gained broad attention in water treatment. However, its limited reactivity toward some refractory micropollutants hinders its application for micropollutant degradation. Herein, we introduced UVA-LED photolysis of Mn(VII) (UVA-LED/Mn(VII)) to degrade micropollutants (diclofenac (DCF), 4-chlorophenol (4-CP), atrazine, and nitrobenzene) by selecting DCF and 4-CP as target micropollutants. The effects of operating conditions (e.g., light intensity, radiation wavelengths, pH, and water constituents) on DCF and 4-CP degradation as well as the underlying mechanisms were systematically studied. The degradation rates of DCF and 4-CP linearly decreased with increasing radiation wavelengths (from 365 to 405 nm), likely due to the decreased molar absorption coefficients and quantum yields of Mn(VII). Reactive manganese species (RMnS), including Mn(V), Mn(III), and HO•, were generated in the UVA-LED/Mn(VII) process. Mn(V) and HO• were responsible for DCF degradation, while Mn(III), HO•, and likely Mn(V) accounted for 4-CP degradation. Competitive kinetic results revealed that contributions of RMnS and HO• decreased with increasing radiation wavelengths, wherein RMnS played the dominant role. Increasing pH displayed opposite effects on DCF and 4-CP degradation with higher degradation efficiency obtained at acidic pH for the former one but alkaline pH for the latter one. The presence of water background ions (e.g., Cl^-, HCO₃^-, and Ca²⁺) barely influenced DCF and 4-CP degradation. Finally, in comparison with Mn(VII) alone, enhanced degradation of DCF and 4-CP by UVA-LED/Mn(VII) was observed in real waters. This work advances the understanding of the photochemistry of manganese species in micropollutant degradation and facilitates Mn(VII) oxidation in practical application.

Revisiting the effect of boiling on halogenated disinfection byproducts, total organic halogen, and cytotoxicity in simulated tap water

Boiling is a widely adopted household tap water treatment method because of its ability to inactivate chlorine-resistant pathogenic bacteria, and to reduce certain groups of disinfection byproducts (DBPs). From a more comprehensive point of view, this study revisited the effect of boiling on four groups of 17 aliphatic DBPs and six groups of 44 aromatic DBPs in both simulated chlorinated and chloraminated tap water samples, with a special focus on the changes of total organic halogen (TOX) and cytotoxicity. Results showed that the concentrations of aliphatic DBPs substantially decreased during boiling via volatilization (trihalomethanes and chloral hydrate) and hydrolysis (haloacetamides) in chlorinated and chloraminated tap water samples. The concentrations of aromatic DBPs during boiling generally followed an increasing trend due to decarboxylation of polycarboxylic precursors in chlorinated tap water samples, and showed a first increasing and then decreasing trend in chloraminated tap water samples. A sharp decreasing of TOX occurred in the heating process of tap water samples from room temperature to 100 °C, and a relatively gentle decreasing was kept in the prolonged boiling process till 5 min. The most abundant DBP group in the tap water samples without boiling was trihalomethanes, and was replaced by haloacetic acids with boiling for 5 min. Continuous boiling for 5 min substantially reduced the cytotoxicity of chlorinated and chloraminated water samples by 52.6% and 21.3%, respectively. Reduction of cytotoxicity matched well with the reduction of TOCl (r = 0.907, P < 0.01), TOBr (r = 0.885, P < 0.01) and TOX (r = 0.905, P < 0.01), suggesting that the cytotoxicity reduction during boiling was mainly ascribed to the reduction of halogenated DBPs. Therefore, boiling of tap water to 100 °C was strongly recommended to reduce the potential health risks induced by tap water ingestion.

A Critical Review on Chemical Speciation of Chlorine-Produced Oxidants (CPOs) in Seawater. Part 1: Chlorine Chemistry in Seawater and Its Consequences in Terms of Biocidal Effectiveness and Environmental Impact

Seawater chlorination has three main industrial uses: disinfection of water and installations, control of biofouling, and preventing the transport of aquatic invasive species. Once in contact with seawater, chlorine reacts rapidly with water constituents (e.g. bromide ions, ammonia, and nitrogen-containing compounds) to form a range of oxidative species (e.g. bromine and N-haloamines), termed "chlorine-produced oxidants" (CPOs) or "total residual oxidants" (TRO). The chemical nature of CPOs and their concentration are a function of two categories of parameters related to treatment modality (e.g. chlorine dose) and water quality (e.g. temperature, pH, ammonia concentration, and organic constituents). The chlorination process may result in continuous or intermittent releases of CPOs in seawater. The reactivity and potential ecotoxicity of CPO species largely depend on their physical and chemical properties. Therefore, evaluation of the biocidal effectiveness of chlorination and its potential impacts requires not only determining the sum of CPOs (via a bulk parameter), but also their chemical speciation. The aim of this article - which is the first of a trilogy dedicated to the chemical speciation of CPOs in seawater - is to provide an overview of current knowledge about chlorine chemistry in seawater and to discuss the biocidal efficacy and the environmental fate of resulting CPOs. The 2nd and 3rd articles delineate a comprehensive and critical review of analytical methods and approaches for the determination of CPOs in seawater.

Formation of halogenated disinfection byproducts in chlorinated real water during making hot beverage: Effect of sugar addition

Chlorine disinfection is widely applied in drinking water treatment plant to inactivate pathogens in drinking water, but it unintentionally reacts with organic matter present in source waters and generates halogenated disinfection byproducts (DBPs). Sugar is one of the most commonly used seasoning in our diet. The addition of sugar could significantly improve the taste of the beverages; however, the effects of sugar on DBP formation and transformation remain unknown. In this study, the effects of sugar type and dose on the halogenated DBP formation in chlorinated boiled real tap water were evaluated during making hot beverages. We found that sugar can react with chlorine residual in tap water and generate halogenated DBPs. As the most commonly used table sugar, the addition of sucrose in the water sample at 100 or 500 mg/L as C could increase the level of total organic halogen (TOX) by ∼35%, when compared with the boiled tap water sample without sugar addition. In addition, fifteen reported and new polar brominated and chlorinated DBPs were detected and proposed from the reaction between chlorine and sucrose; accordingly, the corresponding transformation pathways were also proposed. Moreover, the DBP formation in the chlorinated boiled real tap water samples with the addition of xylose, glucose, sucrose, maltose and lactose were also investigated. By comparing with the TOX levels in the water samples with different sugar addition and their calculated TOX risk indexes, it was suggested that applying xylose as a sweetener in beverages could not only obtain a relatively high sweetness but also minimize the adverse effect inducing by halogenated DBPs during making hot beverages.

Bromoacetic acid impairs mouse oocyte in vitro maturation through affecting cytoskeleton architecture and epigenetic modification

As a major public health achievement, disinfection of drinking water significantly decreases outbreaks of waterborne disease, but produces drinking water disinfection by-products (DBPs) unfortunately. The haloacetic acids (HAAs) including bromoacetic acid (BAA), the second major class of DBPs, are considered as a global public health concern. BAA has been identified as cytotoxic, genotoxic, mutagenic, carcinogenic, and teratogenic in somatic cells. However, the toxic effects of BAA on oocyte maturation remain obscure. Herein, we documented that exposure to BAA compromised mouse oocyte maturation in vitro, causing blocked polar body extrusion (PBE). Meiotic progression analysis demonstrated that exposure to BAA induced the activated spindle assembly checkpoint (SAC) mediated metaphase I (MI) arrest in oocytes. Further study revealed that exposure to BAA resulted in the hyperacetylation of α-tubulin, disrupting spindle assembly and chromosome alignment, which is responsible for the activation of SAC. Besides, the organization of actin, the other major component of cytoskeleton in oocytes, was disturbed after BAA exposure. In addition, exposure to BAA altered the status of histone H3 methylation and 5 mC, indicative of the damaged epigenetic modifications. Moreover, we found that exposure to BAA induced DNA damage in a dose-dependent manner in oocytes. Collectively, our study evidenced that exposure to BAA intervened mouse oocyte maturation via disrupting cytoskeletal dynamics, damaging epigenetic modifications and inducing accumulation of DNA damage.

Reactive Nitrogen Species Mediated Inactivation of Pathogenic Microorganisms during UVA Photolysis of Nitrite at Surface Water Levels

UVA photolysis of nitrite (NO₂^-) occurs in a number of natural and engineered aquatic systems. This study reports for the first time that pathogenic microorganisms can be effectively inactivated during the coexposure of UVA irradiation and NO₂^- under environmentally relevant conditions. The results demonstrated that more than 3 log inactivation of Escherichia coli K-12, Staphylococcus aureus, and Spingopyxis sp. BM1-1 was achieved by UVA photolysis of 2.0 mg-N L^-1 of NO₂^- in synthetic drinking water and real surface water. The inactivation was mainly attributed to the reactive species generated from UVA photolysis of NO₂^- rather than UVA irradiation or NO₂^- oxidation alone. The inactivation was predominantly contributed by the reactive nitrogen species (NO₂^• and ONOO^-/HOONO) instead of the reactive oxygen species (HO^• or O₂^•-). A kinetic model to simulate the reactive species generation from UVA photolysis of NO₂^- was established, validated, and used to predict the contributions of different reactive species to the inactivation under various environmental conditions. Several advanced tools (e.g., D₂O - labeling with Raman spectroscopy) were used to demonstrate that the inactivation by the UVA/NO₂^- treatment was attributed to the DNA destruction by the reactive nitrogen species, which completely suppressed the viable but nonculturable (VBNC) states and the reactivation of bacteria. This study highlights a novel process for the inactivation of pathogenic microorganisms in water and emphasizes the critical role of reactive nitrogen species in water disinfection and purification.

Global public health implications of human exposure to viral contaminated water

Enteric viruses are common waterborne pathogens found in environmental water bodies contaminated with either raw or partially treated sewage discharge. Examples of these viruses include adenovirus, rotavirus, noroviruses, and other caliciviruses and enteroviruses like coxsackievirus and polioviruses. They have been linked with gastroenteritis, while some enteric viruses have also been implicated in more severe infections such as encephalitis, meningitis, hepatitis (hepatitis A and E viruses), cancer (polyomavirus), and myocarditis (enteroviruses). Therefore, this review presents information on the occurrence of enteric viruses of public health importance, diseases associated with human exposure to enteric viruses, assessment of their presence in contaminated water, and their removal in water and wastewater sources. In order to prevent illnesses associated with human exposure to viral contaminated water, we suggest the regular viral monitoring of treated wastewater before discharging it into the environment. Furthermore, we highlight the need for more research to focus on the development of more holistic disinfection methods that will inactivate waterborne viruses in municipal wastewater discharges, as this is highly needed to curtail the public health effects of human exposure to contaminated water. Moreover, such a method must be devoid of disinfection by-products that have mutagenic and carcinogenic potential.

Tradeoff between micropollutant abatement and bromate formation during ozonation of concentrates from nanofiltration and reverse osmosis processes

Water treatment with nanofiltration (NF) or reverse osmosis (RO) membranes results in a purified permeate and a retentate, where solutes are concentrated and have to be properly managed and discharged. To date, little is known on how the selection of a semi-permeable dense membrane impacts the dissolved organic matter in the concentrate and what the consequences are for micropollutant (MP) abatement and bromate formation during concentrate treatment with ozone. Laboratory ozonation experiments were performed with standardized concentrates produced by three membranes (two NFs and one low-pressure reverse osmosis (LPRO) membrane) from three water sources (two river waters and one lake water). The concentrates were standardized by adjustment of pH and concentrations of dissolved organic carbon, total inorganic carbon, selected micropollutants (MP) with a low to high ozone reactivity and bromide to exclude factors which are known to impact ozonation. NF membranes had a lower retention of bromide and MPs than the LPRO membrane, and if the permeate quality of the NF membrane meets the requirements, the selection of this membrane type is beneficial due to the lower bromate formation risks upon concentrate ozonation. The bromate formation was typically higher in standardized concentrates of LPRO than of NF membranes, but the tradeoff between MP abatement and bromate formation upon ozonation of the standardized concentrates was not affected by the membrane type. Furthermore, there was no difference for the different source waters. Overall, ozonation of concentrates is only feasible for abatement of MPs with a high to moderate ozone reactivity with limited bromate formation. Differences in the DOM composition between NF and LPRO membrane concentrates are less relevant than retention of MPs and bromide by the membrane and the required ozone dose to meet a treatment target.

A review on environmental occurrence, toxic effects and transformation of man-made bromophenols

Brominated phenols (BPs) of anthropogenic origin are aromatic substances widely used in the industry as flame retardants (FRs) and pesticides as well as the components of FRs and polymers. In this review, we have focused on describing 2,4-dibromophenol (2,4-DBP), 2,4,6-tribromophenol (2,4,6-TBP) and pentabromophenol (PBP), which are the most commonly used in the industry and are the most often detected in the air, aquatic and terrestrial ecosystems and the human body. This review describes human-related sources of these BPs that influence their occurrence in the environment (atmosphere, surface water, sediment, soil, biota), indoor air and dust, food, drinking water and the human organism. Data from in vitro and in vivo studies showing 2,4-DBP, 2,4,6-TBP and PBP toxicity, including their estrogenic activity, effects on development and reproduction, perturbations of cellular redox balance and cytotoxic action have been described. Moreover, the processes of BPs transformation that occur in human and other mammals, plants and bacteria have been discussed. Finally, the effect of abiotic factors (e.g. UV irradiation and temperature) on BPs conversion to highly toxic brominated dioxins and brominated furans as well as polybrominated biphenyls and polybrominated diphenyl ethers has been presented.

Evaluation of preformed monochloramine for bromate control in ozonation for potable reuse

Bromate, a regulated disinfection byproduct, forms during the ozonation of bromide through reactions with both ozone and hydroxyl radical. In this study, preformed monochloramine was evaluated for use as a bromate suppression method in pilot testing of wastewater reuse with an average bromide concentration of 422±20 µg/L. A dose of 3 mg/L NH₂Cl-Cl₂ decreased bromate formation by an average of 82% and was sufficient to keep bromate below the MCL at ozone doses up to 8.6 mg/L (1.2 O₃:TOC). Removal of 1,4-dioxane through ozonation decreased with increasing NH₂Cl dose, confirming that monochloramine suppresses bromate formation, at least in part, by acting as a hydroxyl radical scavenger. This may negatively impact oxidation objectives of ozonation in reuse applications. Increasing monochloramine contact time did not improve bromate suppression, indicating that monochloramine probably did not mask bromide as NHBrCl or other haloamines prior to ozonation. However, NHBrCl and NH₂Br may be formed from reactions between HOBr and NH₂Cl and excess free ammonia during ozonation. NDMA was formed by ozonation at concentrations up to 79 ng/L and was not enhanced by NH₂Cl addition.

Kinetic and mechanistic investigations of the decomposition of bromamines in the presence of Cu(II)

This study demonstrates that Cu(II) can significantly enhance the decomposition rate of bromamines. Apparent second order rate constants of 2.31 ± 0.01 M^-1s^-1 and 0.36 ± 0.01 M^-1s^-1 at pH 7.5 were determined for the reaction of Cu(II) with bromamines and the self-decomposition of bromamines, respectively. Increasing the pH from 6.0 to 8.5, the rate of bromamines self-decomposition decreased while the rate of Cu(II)-catalysed decomposition of bromamines increased. Species-specific rate constants indicated that Cu(OH)₂ was the most reactive copper species towards NH₂Br and NHBr₂. Experiments were carried out with ¹⁵N-labelled bromamines to analyse the nitrogenous degradation products of bromamines in the presence and absence of Cu(II). Nitrogen gas (N₂) was found to be the major product from the self-decomposition of bromamines, with N₂O, NO₂^-, and NO₃^- as additional minor products. When Cu(II) was present, the product distribution changed and NO₂^- and N₂O became significant, while N₂ and NO₃^- were produced at low levels. Increasing the Cu(II) concentration from 1.0 to 5.0 mg/L increased the N₂O production while decreased the NO₂^- formation. Based on these results, a mechanism for Cu(II)-catalysed decomposition of bromamines is proposed. This work provides new insights related to the chemistry of bromamines in chloraminated drinking water distribution systems where copper is present.

Sustainable ferrate oxidation: Reaction chemistry, mechanisms and removal of pollutants in wastewater

This review is intended to evaluate the use of ferrate (Fe(VI)), being a green coagulant, sustainable and reactive oxidant, to remove micro pollutants especially pharmaceutical pollutants in contaminated water. After a brief description of advanced oxidation processes, fundamental dimensions regarding the nature, reactivity, and chemistry of this oxidant are summarized. The degradation of contaminants by Fe(VI) involves several mechanisms and reactive agents which are critically evaluated. The efficiency and chemistry of Fe(VI) oxidation differs according to the reaction conditions and activation agent, such as soluble Fe(VI) processes, which involve Fe(VI), UV light, and electro-Fe(VI) oxidation. Fe(VI) application methods (including single dose, multiple doses, chitosan coating etc), and Fe(VI) with activating agents (including sulfite, thiosulfate, and UV) are also described to degrade the micro pollutants. Besides, application of Fe(VI) to remove pharmaceuticals in wastewater are intensely studied. Electrochemical prepared Fe(VI) has more wide application than wet oxidation method. Meanwhile, we elaborated Fe(VI) performance, limitations, and proposed innovative aspects to improve its stability, such as the generation of Fe(III), synergetic effects, nanopores entrapment, and nanopores capsules. This study provides conclusive direction for synergetic oxidative technique to degrade the micro pollutants.

Characterization of enoxacin (ENO) during ClO2 disinfection in water distribution system: Kinetics, byproducts, toxicity evaluation and halogenated disinfection byproducts (DBPs) formation potential

Enoxacin (ENO) is widespread in water because it is commonly used as a human and veterinary antibiotic. However, little effort has been dedicated to revealing the transformation mechanisms of ENO destruction using ClO₂, especially within a water distribution system (WDS). To address this knowledge gap, the kinetics, byproducts, toxicity, and formation potential of halogenated disinfection byproducts (DBPs) associated with ENO destruction using ClO₂ in a pilot-scale PE pipe was explored for the first time. Statistical analyses showed that the destruction efficiency of ENO in the pilot-scale PE pipe was lower than that in deionized water (DI water), and the reactions in DI water followed the second-order kinetic model. Furthermore, pH has a significant effect on the destruction of ENO, and the removal ratio increased at a higher pH. Additionally, increasing the flow rate elevated the ENO removal efficiency; however, the influence of flow velocity was limited to ENO destruction. The ENO removal rates within the diverse pipes exhibited the following order: stainless steel pipe < PE pipe < ductile iron pipe. Nine possible intermediates were identified, and those that were formed by piperazine group cleavage represented the major primary byproducts of the entire destruction process. Additionally, the ENO destruction in a pilot-scale PE pipe had minimal influence on halogenated DBPs and chlorite formation. Finally, the toxicity evaluation illustrated that the presence of ENO increased the potential risk of water quality safety when treated with ClO₂.

Degradation of ethyl butylacetylaminopropionate (IR3535) during chlorination: Tentative identification and toxicity prediction of its disinfection by-products

Studies have reported the presence of ethyl butylacetylaminopropionate (IR3535) in waters, and the content of this repellent is expected to rise significantly in the future. There are extremely scarce data in the literature regarding the behavior of IR3535 and its derivatives in water. The present work reports the results obtained from experiments conducted under controlled conditions aiming at investigating the transformation of IR3535 in chlorinated water, in addition to an attempt to identify its disinfection by-products (DBPs). The work also reports the findings of analyses conducted in swimming pool water samples which sought to investigate the presence and content of IR3535 and its targeted DBPs in these samples. The results obtained in the controlled experiments show that IR3535 is not completely degraded under the chlorinated conditions evaluated and 9 DBPs were tentatively identified. The presence of IR3535 was detected in both adults and children's pool water samples at concentrations ranging from 62 ng L^-1 to 114 ng L^-1. Some of the DBPs identified in the controlled experiments were also detected in the pool water samples. The toxicity of the 9 DBPs identified was evaluated using the QSAR model, where some by-products presented mutagenic and carcinogenic properties.

Directing photocatalytic pathway to exceedingly high antibacterial activity in water by functionalizing holey ultrathin nanosheets of graphitic carbon nitride

Metal-free polymeric carbon nitride (C₃N₄) photocatalysts offer attractive technological advantages over the conventional transition metal oxides or sulfides -based photocatalysts in water disinfection, but their antimicrobial activities are limited by their rapid charge carrier recombination and low specific surface areas. By controlling photocatalytic pathways, we obtained in amino-rich holey ultrathin g-C₃N₄ nanosheets (AHUCN) a highly efficient inactivation rate against E-coli, which is the highest among the monolithic g-C₃N₄ and exceeds the antibacterial performance of the most of the previously reported g-C₃N₄-based photocatalysts. Both the experiments and theoretical calculations demonstrated that the high photocatalytic disinfection performance of AHUCN was derived from the synergistic advantages of their unique holey ultrathin structure and the amino - rich surface in controlling the charge separation and transfer, and most importantly in increasing the photo-production of the dominant antibacterial species, H₂O₂. From the analysis of the reactive oxygen species and rotating disk electrode (RDE) measurements, it was found that the presence of abundant surface amino groups enabled the switch of the oxygen-reduction pathway from the two-step single-electron indirect reduction on holey ultrathin g-C₃N₄ nanosheets (HUCN) to the one-step two-electron direct reduction on AHUCN. The switch of the H₂O₂ production pathway not only facilitated the separation of photogenerated electron-hole pairs but also promoted the generation of reactive oxygen species, greatly enhancing photocatalytic disinfection efficiency.

Degradation of tetrabromobisphenol A by ferrate(VI)-CaSO3 process: Kinetics, products, and impacts on following disinfection by-products formation

Tetrabromobisphenol A (TBBPA) is one of the most widely applied brominated flame retardants and has been widely detected in water environment, which might pose risks of brominated disinfection by-products formation in water treatment system. Ferrate(VI)-CaSO₃ (Fe(VI)-CaSO₃) system could effectively degrade TBBPA at pH 7.0-9.0 but the decomposition rate of TBBPA dropped with increasing pH. The presence of 0.5 mg C/L humic acid (HA) had negligible impact on TBBPA removal, but the removal of TBBPA decreased to ~87% and 80% at pH 7.0 and 8.0, respectively, in the presence of 5.0 mg C/L HA. The transformation products of TBBPA detected in Fe(VI)-CaSO₃ process revealed that TBBPA degradation mainly proceeded via electron abstraction, debromination, and ring-opening pathways and Br^- was released. In the presence of TBBPA, Fe(VI)-CaSO₃ pre-oxidation decreased the generation of all determined DBPs during chlorination at pH 8.0 but it lessened the generation of some DBPs and slightly increased the formation of the other DBPs at pH 7.0. The toxic risk analysis showed that Fe(VI)-CaSO₃ pre-oxidation of TBBPA could reduce the toxic risk of DBPs in both synthetic water and natural water at pH 8.0, indicating that Fe(VI)-CaSO₃ process has the potential to be applied in practical water treatment.

Methylparaben chlorination in the presence of bromide ions and ammonia: kinetic study and modeling

The impacts of chlorination on methylparaben (MP) removal, as well as of bromide and ammonia on the MP elimination kinetics, were studied. Bromide and ammonia react with chlorine and are promptly transformed into bromine and chloramines, respectively. Rate constants of chlorine, bromine, and monochloramine with MP were determined under different pH conditions. At pH 8.5, the apparent second-order rate constants of MP reactions with chlorine and bromine were found to be 3.37(±0.50) × 10¹ and 2.37 (±0.11) × 10⁶ M^-1.s^-1 for k_Chlorine/MP and k_Bromine/MP, respectively, yet there was low reactivity with monochloramine ([Formula: see text] = 0.045 M^-1.s^-1). Regarding chlorination and bromination, in order to gain further insight into the observed pH-dependence of the reaction, the elementary reactions were considered and the corresponding second-order rate constants were calculated. The experimental and modeled values were quite consistent under these conditions. Then, chlorination experiments with different bromide and/or ammonia concentrations were performed to assess the impact of inorganic water content on MP elimination and a kinetic model was designed to assess MP degradation. Under these conditions, MP degradation was found to be enhanced in the presence of bromide whereas it was inhibited in the presence of ammonia, and the overall impact was pH dependent.

About plant species potentially promising for phytoextraction of large amounts of toxic trace elements

There is no information yet about plant species capable of accumulating many different metals/metalloids. The plants feasible for phytoremediation aims must grow fast, have high biomass, deep roots, and should accumulate and tolerate a range of toxicants in their aerial parts. In our research, greenhouse and field experiments have been performed to investigate accumulation and tolerance of not well-studied trace elements such as Br, Eu, Sc, Th (and also U) in couch grass and wheat. We compared bioaccumulation abilities of the plants with those of some other plant species grown under the same conditions. Additionally, we tested the effects of inoculation of seeds with Cellulomonas bacteria on phytoextraction of the trace elements from contaminated soils. For determination of elements, we used neutron activation analysis and ICP-MS. It was found that couch grass and wheat can grow in heavily contaminated soils and accumulate different toxic trace elements to levels that exceed physiological requirements typical for most plant species. Infection of seeds with bacteria resulted in a significant increase in the uptake of various trace elements and their translocation to upper plant parts. The use of couch grass and/or wheat, either alone or in combination with microorganisms, is a promising way to phytoextract metals/metalloids from contaminated soils.

Halogen Radicals Contribute to the Halogenation and Degradation of Chemical Additives Used in Hydraulic Fracturing

In hydraulic fracturing fluids, the oxidant persulfate is used to generate sulfate radical to break down polymer-based gels. However, sulfate radical may be scavenged by high concentrations of halides in hydraulic fracturing fluids, producing halogen radicals (e.g., Cl^•, Cl₂^•-, Br^•, Br₂^•-, and BrCl^•-). In this study, we investigated how halogen radicals alter the mechanisms and kinetics of the degradation of organic chemicals in hydraulic fracturing fluids. Using a radical scavenger (i.e., isopropanol), we determined that halogenated products of additives such as cinnamaldehyde (i.e., α-chlorocinnamaldehyde and α-bromocinnamaldehyde) and citrate (i.e., trihalomethanes) were generated via a pathway involving halogen radicals. We next investigated the impact of halogen radicals on cinnamaldehyde degradation rates. The conversion of sulfate radicals to halogen radicals may result in selective degradation of organic compounds. Surprisingly, we found that the addition of halides to convert sulfate radicals to halogen radicals did not result in selective degradation of cinnamaldehyde over other compounds (i.e., benzoate and guar), which may challenge the application of radical selectivity experiments to more complex molecules. Overall, we find that halogen radicals, known to react in advanced oxidative treatment and sunlight photochemistry, also contribute to the unintended degradation and halogenation of additives in hydraulic fracturing fluids.

Impacts of pre-oxidation on the formation of disinfection byproducts from algal organic matter in subsequent chlor(am)ination: A review

Algae cells and algal organic matter (AOM) present in algae impacted source water pose a serious threat to the safety of drinking water. Conventional water treatment processes poorly remove AOM that can transform to harmful disinfection byproducts (DBPs) during ensuing disinfection. This article offers a comprehensive review on the impacts of pre-oxidation on the formation of DBPs from AOM in subsequent chlor(am)ination. Various characterization techniques for algal cells and AOM are first overviewed with an effort to better understanding of correlation between the AOM properties and downstream DBP formation. Then, the present work reviews recent studies on application of different pre-oxidation technologies, such as chlor(am) ination, UV irradiation, ozonation, ferrate (VI), permanganate oxidation and UV-based advanced oxidation processes (AOPs), to remove algal cells and degrade AOM. Pre-oxidation can reduce the stability of algal cells and inactivate algal cells for promoting cell aggregation and thus favoring coagulation. Meanwhile, pre-oxidation can mitigate and degrade AOM into small molecular weight organic compounds to reduce DBP formation potential during subsequent chlor(am)ination. Finally, this review provides an overall evaluation on the applicability of different pre-oxidation processes, and identifies future research demands.

Addition of lemon before boiling chlorinated tap water: A strategy to control halogenated disinfection byproducts

Chlorine disinfection is required to inactivate pathogens in drinking water, but it inevitably generates potentially toxic halogenated disinfection byproducts (halo-DBPs). A previous study has reported that the addition of ascorbate to tap water before boiling could significantly decrease the concentration of overall halo-DBPs in the boiled water. Since the fruit lemon is rich in vitamin C (i.e., ascorbic acid), adding it to tap water followed by heating and boiling in an effort to decrease levels of halo-DBPs was investigated in this study. We examined three approaches that produce lemon water: (i) adding lemon to tap water at room temperature, termed "Lemon"; (ii) adding lemon to boiled tap water (at 100 °C) and then cooling to room temperature, termed "Boiling + Lemon"; and (iii) adding lemon to tap water then boiling and cooling to room temperature, termed "Lemon + Boiling". The concentrations of total and individual halo-DBPs in the resultant water samples were quantified with high-performance liquid chromatography-tandem mass spectrometry and the cytotoxicity of DBP mixtures extracted from the water samples was evaluated using human epithelial colorectal adenocarcinoma Caco-2 cells and hepatoma HepG2 cells. Our results show that the "Lemon + Boiling" approach substantially decreased the concentrations of halo-DBPs and the cytotoxicity of tap water. This strategy could be applied to control halo-DBPs, as well as to lower the adverse health effects of halo-DBPs on humans through tap water ingestion.

Low water treatability efficiency of wildfire-induced dissolved organic matter and disinfection by-product precursors

Wildfire could alter both the quantity and composition of terrestrial organic matter exported into source water, and water treatability of fire-impacted dissolved organic matter (DOM) could be different from its unburned counterpart. Currently, there is no standard protocol to treat wildfire-impacted source water. To identify the best treatment practices in handling post-fire runoffs, we conducted a systematic controlled study using leachates of unburned white fir (Abies concolor) and Ponderosa pine (Pinus ponderosa) and black and white ashes (collected immediately and one year after the 2013 Rim Fire, California) to evaluate coagulation and oxidation strategies for controlling disinfection byproducts (DBPs) formation. Results showed that the efficiency (%) of alum coagulation in removing dissolved organic carbon and nitrogen followed the order of litter > ash immediately after the fire > ash one year after the fire. Alum coagulation was less effectiveness in removing DOM and DBP precursors in ash leachates, compared to litter leachates. This may be attributed to the loss of side chains and the decrease of DOM molecular weight during the wildfire, thus inducing lower removal efficiency of the DOM and DBP precursors during the alum coagulation. Considering use of brominated flame retardants by firefighters, the addition of bromide (Br^-) (100 μg/L) greatly increased the formation of haloacetonitriles by chlorine, and this increase was relatively lower in ash leachates. The influence of reaction time and pH on DOM reactivity was similar among the leachates of litter and ash samples. Our results show that alum coagulation followed by chloramination at alkaline pH is an effective strategy for reducing post-fire DBP formation in drinking water.

Novel Disinfection Byproducts Formed from the Pharmaceutical Gemfibrozil Are Bioaccumulative and Elicit Increased Toxicity Relative to the Parent Compound in Marine Polychaetes (Neanthes arenaceodentata)

Formation of halogenated disinfection byproducts (DBPs) from pharmaceutically active compounds has been observed in water supply systems following wastewater chlorination. Although research has been limited thus far, several studies have shown that halogenated DBPs may elicit increased toxicity compared to their parent compounds. For example, the lipid regulator gemfibrozil has been shown to form chlorogemfibrozil (Cl-gemfibrozil) and bromogemfibrozil (Br-gemfibrozil) following chlorination, which are more potent antiandrogens in male Japanese medaka (Oryzias latipes) compared to their parent compounds. In the present study, we aimed to characterize the bioaccumulative ability of halogenated gemfibrozil DBPs in marine polychaetes via chronic sediment exposures and, consequently, to assess the chronic and acute toxicity of halogenated gemfibrozil DBPs through sediment (in vivo) and aqueous (in vivo and in silico) toxicity evaluations. Following 28 day sediment exposures, Cl-gemfibrozil and Br-gemfibrozil bioaccumulated within Neanthes arenaceodentata, with both compounds reducing survival and growth. The biota-sediment accumulation factors determined for Cl-gemfibrozil and Br-gemfibrozil were 2.59 and 6.86, respectively. Furthermore, aqueous 96 h toxicity tests with N. arenaceodentata indicated that gemfibrozil DBPs elicited increased toxicity compared to the parent compound. While gemfibrozil had an acute LC50 value of 469.85 ± 0.096 mg/L, Cl-gemfibrozil and Br-gemfibrozil had LC50 values of 12.34 ± 0.085 and 9.54 ± 0.086 mg/L, respectively. Although acute toxicity is relatively low, our results indicate that halogenated gemfibrozil DBPs are bioaccumulative and may elicit effects in apex food web organisms prone to accumulation following lifelong exposures.

Effects of ascorbate and carbonate on the conversion and developmental toxicity of halogenated disinfection byproducts during boiling of tap water

Chlorine disinfection inactivates pathogens in drinking water, but meanwhile it causes the formation of halogenated disinfection byproducts (DBPs), which may induce adverse health effects. Humans are unavoidably exposed to halogenated DBPs via tap water ingestion. Boiling of tap water has been found to significantly reduce the concentrations of halogenated DBPs. In this study, we found that compared with boiling only, adding ascorbate (vitamin C) or carbonate (baking soda) to tap water and then boiling the water further reduced the level of total organic halogen (a collective parameter for all halogenated DBPs) by up to 36% or 28%, respectively. Adding ascorbate removed the chlorine residual in tap water and thus prevented the formation of more halogenated DBPs in the boiling process. Adding carbonate elevated pH of tap water and consequently enhanced the hydrolysis (dehalogenation) of halogenated DBPs or led to the formation of more trihalomethanes that might volatilize to air during the boiling process. The comparative developmental toxicity of the DBP mixtures in the water samples was also evaluated. The results showed that adding a tiny amount of sodium ascorbate or carbonate (2.5-5.0 mg/L) to tap water followed by boiling for 5 min reduced the developmental toxicity of tap water to a substantially lower level than boiling only. The addition of sodium ascorbate or carbonate to tap water in household could be realized by preparing them in tiny pills. This study suggests simple and effective methods to reduce the adverse effects of halogenated DBPs on humans through tap water ingestion.

Ferrate(VI) pretreatment before disinfection: An effective approach to controlling unsaturated and aromatic halo-disinfection byproducts in chlorinated and chloraminated drinking waters

Disinfection is an essential process of drinking water treatment to eliminate harmful pathogens, but it generates potentially toxic disinfection byproducts (DBPs). Ferrate (FeO₄^2-, Fe(VI)) was used to pre-oxidize natural organic matter (NOM, the precursor of DBPs) in source water to control DBP formation in subsequent chlorine or chloramine disinfection. Currently, it is unclear how Fe(VI) changes the structure of NOM, and no information details the effect of Fe(VI) pretreatment on the aromatic DBPs or the speciation of overall DBPs generated in subsequent disinfection of drinking water. In the present paper, Fe(VI) was applied to pretreat simulated source water samples at a Fe(VI) to dissolved organic carbon mole ratio of 1:1 at pH 8.0. ¹³C nuclear magnetic resonance spectroscopy was newly employed to characterize NOM in simulated source waters with and without Fe(VI) treatment, and it was demonstrated that Fe(VI) converted unsaturated aromatic C functional groups in NOM to saturated aliphatic ones. High-resolution mass spectrometry (HRMS) and high performance liquid chromatography/triple quadrupole MS were applied to analyze the DBPs generated in chlorination and chloramination of the source waters with and without Fe(VI) pretreatment. It was confirmed that Fe(VI) pretreatment followed by chlorination (or chloramination), generated DBPs containing less unsaturated, halogenated, and aromatic moieties than chlorination (or chloramination) without pretreatment by Fe(VI). Finally, the cytotoxicity of disinfected drinking water samples were assessed with the human epithelial colorectal adenocarcinoma Caco-2 cell line (a model of the intestinal barrier for ingested toxicants), and the results show that Fe(VI) pretreatment detoxified the chlorinated and chloraminated drinking waters.

A geospatially resolved database of hydraulic fracturing wells for chemical transformation assessment

Hydraulically fractured wells with horizontal drilling (HDHF) accounted for 69% of all oil and gas wells drilled and 670 000 of the 977 000 producing wells in 2016. However, only 238 flowback and produced water samples have been analyzed to date for specific organic chemicals. To aid the development of predictive tools, we constructed a database combining additive disclosure reports and physicochemical conditions at respective well sites with the goal of making synthesized analyses accessible. As proof-of-concept, we used this database to evaluate transformation pathways through two case studies: (1) a filter-based approach for flagging high-likelihood halogenation sites according to experimental criteria (e.g., for a model compound, cinnamaldehyde) and (2) a semi-quantitative, regionally comparative trihalomethane formation model that leverages an empirically derived equation. Study (1) highlighted 173 wells with high cinnamaldehyde halogenation likelihood based on combined criteria related to subsurface conditions and oxidant additive usage. Study (2) found that trihalomethane formation in certain wells within five specific basins may exceed regulatory limits for drinking water based on reaction-favorable subsurface conditions, albeit with wide uncertainty. While experimentation improves our understanding of subsurface reaction pathways, this database has immediate applications for informing environmental monitors and engineers about potential transformation products in residual fluids, guiding well operators' decisions to avoid unwanted transformations. In the future, we envision more robust components incorporating transformation, transport, toxicity, and other physicochemical parameters to predict subsurface interactions and flowback composition.

Degradation behaviors of Isopropylphenazone and Aminopyrine and their genetic toxicity variations during UV/chloramine treatment

Combination of ultraviolet and chloramine (i.e., UV/chloramine) treatment has been attracting increasingly attention in recent years due to its high efficiency in removing trace organic contaminants. This study investigated the degradation behaviors of two pyrazolone pharmaceuticals (i.e., Isopropyl phenazone (PRP) and Aminopyrine (AMP)) and their genetic toxicity variations during UV/chloramine treatment. The results showed that chloramine could hardly degrade PRP and AMP, while UV/chloramine greatly increased the observed first-order rate constant (k_obs) of PRP and AMP degradation. The quenching and probe experiments illustrated that the reactive chlorine species (RCS) contributed dominantly to PRP removal, and hydroxyl radical (HO^•) was the major contributor to the degradation of AMP, while the reactive amine radicals (RNS) could hardly degrade them. The overall degradation rates of PRP and AMP decreased as pH increased from 6.5 to 10. The k_obs of PRP and AMP increased along with NH₂Cl dosage increasing and reached a plateau at higher concentrations (0.2-0.5 mM). The present background carbonate (HCO₃^-, 1-10 mM), chloride (Cl^-, 1-10 mM) and natural organic matter (NOM, 5-10 mg-C L^-1) exhibited inhibition impacts on PRP and AMP degradation. In addition, the intermediates/products of PRP and AMP were identified and their general degradation pathways were proposed to be hydroxylation, deacetylation, and dephenylization. Specifically, Cl-substitution was inferred during PRP degradation, while demethylation in tertiary amine group was only observed in AMP degradation. These mechanisms including the main reactive sites of PRP and AMP were further confirmed by the frontier orbitals calculation. Moreover, the results of the genetic toxicity according to the micronucleus test of Viciafaba root tip indicated that UV/chloramine treatment could partially reduce the genetic toxicity of PRP and AMP.

Formation of assimilable organic carbon (AOC) during drinking water disinfection: A microbiological prospect of disinfection byproducts

Disinfection processes might alter the chemical structure of biological recalcitrant natural organic matter (NOM) in source water to form assimilable organic carbon (AOC), which can be readily utilized by microbes for growth. However, AOC has not been classified as disinfection byproducts (DBPs) before and little is known about the chemical and structural nature of AOC. This study, for the first time, considers the disinfection-induced AOC as DBPs from a microbiological perspective. The AOC formation by three types of disinfection processes, i.e., chlorination, UVC irradiation (254 nm) and photocatalysis represented by TiO₂-UVA in drinking water containing two reference NOM materials of Suwannee River and Nordic Reservoir (SRNOM and NRNOM, respectively) were comparatively benchmarked using Pseudomonas aeruginosa as inoculum. Results showed that chlorination caused a substantial increase in AOC content, whereas TiO₂-UVA led to a moderate increase in AOC content and UVC rendered the AOC content unchanged, independent of the types of NOM. Molecular weight indicated by spectral slope ratio and fluorescence fingerprint were found to not provide critical information about the AOC formation potential. FTIR and FT-ICR-MS results indicated that the AOC formation by chlorination was attributed to the oxidation and chlorine substitution on aromatic molecules to form molecules with carboxylic- and alcohol- functionalities, as well as chlorinated aromatics. These molecules could be metabolized and assimilated by Pseudomonas species by a catechol pathway. The results obtained in this study can provide valuable insight regarding the selection of proper technologies for disinfection to prevent microbial growth/regrowth in the distributing system and is intended to encourage more thinking and research on AOC as a new prospect of DBPs during disinfection of drinking water.

Application of stabilized hypobromite for controlling membrane fouling and N-nitrosodimethylamine formation

Chloramination is a conventional and successful pre-disinfection approach to control biological fouling for reverse osmosis (RO) treatment in water reuse. This study aimed to evaluate the possibility of using a new disinfectant-stabilized hypobromite-in controlling membrane fouling and the formation of a particular carcinogenic disinfection byproduct (DBP)-N-nitrosodimethylamine (NDMA). Our accelerated chemical exposure tests showed that the new disinfectant reduced the permeability of a polyamide RO membrane permeability from 6.7 to 4.1 L/m²hbar; however, its treatment impact was equivalent to that of chloramine. The disinfection efficacy of stabilized hypobromite was greater than that of chloramine when evaluated with intact bacterial counts, which suggests its potential for mitigating membrane biofouling. Additional pilot-scale tests using synthetic wastewater demonstrated that pre-disinfection with the use of stabilized hypobromite inhibits membrane fouling. Among 13 halogenated DBPs evaluated, the formation of bromoform by stabilized hypobromite was higher than that by chloramine at a high dose of 10 mg/L, thus suggesting the need for optimizing chemical doses for achieving sufficient biofouling mitigation. NDMA formation upon stabilized hypobromite treatment in two different types of actual treated wastewaters was found to be negligible and considerably lower than that by chloramine treatment. In addition, NDMA formation potential by stabilized hypobromite was 2-5 orders of magnitude lower than that by chloramine. Our findings suggest the potential of using stabilized hypobromite for controlling NDMA formation and biofouling, which are the keys to successful potable water reuse.

Ferrate(VI) pre-treatment and subsequent chlorination of blue-green algae: Quantification of disinfection byproducts

Algal organic matter (AOM) from seasonal algal blooms may be an important precursor of disinfection byproducts (DBPs) in drinking water. This paper presents the effect of ferrate(VI) treatment on two blue-green algae, Chlorella sp. and Pseudanabaena limnetica, in eutrophic water. The results demonstrated that Fe(VI) removed the algal cells by causing cell death, apoptosis, and lost integrity, and decreased AOM (in terms of total organic carbon) in water via oxidation and coagulation. Chlorination of the Fe(VI) pre-oxidized algal water samples generated halogenated DBPs (including trihalomethanes, haloacetic acids, haloketones, chloral hydrate, haloacetonitriles, and trichloronitromethane), but the concentrations of DBPs were lower than those formed in the chlorinated samples without pre-treatment by Fe(VI). Higher Fe(VI) dose, longer oxidation time, and alkaline pH were beneficial in controlling DBPs. In bromide-containing algal solutions, negligible amount of bromo-DBPs were generated in the Fe(VI) pre-oxidation, and halogenated DBPs were mainly formed in the subsequent chlorination.

Degradation of tetrabromobisphenol a by ozonation: Performance, products, mechanism and toxicity

This study systematically investigated the performance of ozonation on tetrabromobisphenol A (TBBPA) degradation under different ozone dosages (5.21-83.33 μmoL/L), initial solution pH (3.0-11.0) and temperatures (10-50 °C). At the same time, the generations of inorganic products (bromide ion and bromate) under different experimental conditions were evaluated and the organic products were also identified. Then, the possible mechanism was proposed and verified by the quantum chemical calculation. In addition, variations and controlling of the toxicity were also analyzed, including acute toxicity, chronic toxicity and genotoxicity. Ozonation was proved to be an efficient and promising technology for removing TBBPA from water. TBBPA of 1.84 μmoL/L could be completely degraded within 5 min under the ozone dosage of 41.67 μmoL/L in wide ranges of pH (3.0-11.0) and temperature (10-40 °C). During the degradation of TBBPA, over 65% of the average bromine ion was detected and nine products were identified. The proposed degradation pathways verified that TBBPA might undergo addition and stepwise oxidative debromination, the hydrogen extraction, and the deprotonation. The results of toxicity testing showed that ozonation could effectively control the acute and chronic toxicity of the water samples, although the toxicity increased in the initial reaction stage due to the accumulation of more toxic intermediates.

Oxidative Breakers Can Stimulate Halogenation and Competitive Oxidation in Guar-Gelled Hydraulic Fracturing Fluids

A number of flowback samples derived from horizontally drilled hydraulic fracturing (HDHF) operations reveal consistent detections of halogenated organic species , yet the source of these compounds remains uncertain. Studies simulating subsurface conditions have found that oxidative "breakers" can halogenate certain additives, but these pathways are unverified in the presence of cross-linked-gels, common features of HDHF operations. Using a high-throughput custom reactor system, we implemented a reaction matrix to test the capacity for halogenation of two frequently disclosed compounds with demonstrated halogenation pathways (cinnamaldehyde and citric acid) across guar gels with varied types and concentrations of cross-linkers and oxidative breakers. Cinnamaldehyde halogenation proceeded most readily in borate cross-linked gels at high ammonium persulfate dosages. Citric acid formed trihalomethanes (THMs) broadly across the matrix, generating brominated THMs at higher levels of hypochlorite breaker. Isolated removals of cross-linker or guar enhanced or diminished certain product formations, highlighting additional capacities for relevant ingredients to influence halogenation. Finally, we analyzed flowback samples from the Denver-Julesberg Basin, finding that additions of oxidant enhanced halogenation. As a more realistic subsurface simulation, this work demonstrates strict criteria for the subsurface halogenation of cinnamaldehyde and the broad capacity for THM formation due to systematic oxidant usage as gel breakers in HDHF operations.

Formation of Brominated Organic Compounds and Molecular Transformations in Dissolved Organic Matter (DOM) after Ballast Water Treatment with Sodium Dichloroisocyanurate Dihydrate (DICD)

Estuarine water treated with a ballast water management system (BWMS) using a solution of dissolved dichloroisocyanurate dihydrate (DICD) resulted in the formation of newly described brominated disinfection byproducts (Br-DBPs). Analysis of dissolved organic matter (DOM) in untreated water with ultrahigh resolution Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) identified 3897 m/z ions and their exact molecular formulas. After DICD treatment, a total of 213 halogenated molecular ions with relative abundance of at least 1% were assigned and confirmed using isotope simulation. Halogenated ions were assigned in four DBP elemental groups including CHOBr (180), CHONBr (13), CHOCl (16), and CHOBrCl (4). Forty-nine of the 197 brominated formulas have not been previously reported. We also were able to tentatively assign possible structures to the formula C₃HBr₃N₂ due to very limited isomeric possibilities. The tentatively assigned compound found at 6.4% relative abundance was identified as either tribromoimidazole or tribromopyrazole. Our results show the formation of complex halogenated DBPs that are formed in the treatment of water with a novel BWMS that employs granular DICD as a biocide. The toxicological and mutagenic properties as well as the fate of these newly identified brominated DBPs are unknown.

Water depollution using metal-organic frameworks-catalyzed advanced oxidation processes: A review

This paper presents a review on the environmental applications of metal-organic frameworks (MOFs), which are inorganic-organic hybrid highly porous crystalline materials, prepared from metal ion/clusters and multidentate organic ligands. The emphases are made on the enhancement of the performance of advanced oxidation processes (AOPs) (photocatalysis, Fenton reaction methods, and sulfate radical (SO₄^-)-mediated oxidations) using MOFs materials. MOFs act as adsorption and light absorbers, leading to superior performance of photocatalytic processes. More recent examples of photocatalytic degradation of dyes are presented. Additionally, it is commonly shown that Fe-based MOFs exhibited excellent catalytic performance on the Fenton-based and SO₄^•--mediated oxidations of organic pollutants (e.g., dyes, phenol and pharmaceuticals). The significantly enhanced generation of reactive species such as OH and/or SO₄^- by both homogeneous and heterogeneous catalysis was proposed as the possible mechanism for water depollution. Based on the existing literature, the challenge and future perspectives in MOF-based AOPs are addressed.