Severe acute respiratory syndrome coronavirus on hospital surfaces

Antimicrobial and Antifouling Effects of Petal-Like Nanostructure by Evaporation-Induced Self-Assembly for Personal Protective Equipment

Although the personal protective equipment (PPE) used by healthcare workers (HCWs) effectively blocks hazardous substances and pathogens, it does not fully rule out the possibility of infection, as pathogens surviving on the fabric surface pose a substantial risk of cross-infection through unintended means. Therefore, PPE materials that exhibit effective biocidal activity while minimizing contamination by viscous body fluids (e.g., blood and saliva) and pathogen-laden droplets are highly sought. In this study, petal-like nanostructures (PNSs) are synthesized through the vertical rearrangement of colloidal lamellar bilayers via evaporation-induced self-assembly of octadecylamine, silica-alumina sol, and diverse photosensitizer. The developed method is compatible with various fabrics and imparts visible-light-activated antimicrobial and superhydrophobic-based antifouling activities. PNS-coated fabrics could provide a high level of protection and effectively block pathogen transmission as exemplified by their ability to roll off viscous body fluids reducing bacterial droplet adhesion and to inactivate various microorganisms. The combination of antifouling and photobiocidal activities results in the complete inactivation of sprayed pathogen-laden droplets within 30 min. Thus, this study paves the way for effective contagious disease management and the protection of HCWs in general medical environments, inspiring further research on the fabrication of materials that integrate multiple useful functionalities.

Occurrence of Human Viruses on Fomites in the Environment: A Systematic Review and Meta-analysis

Documenting the occurrence of viruses on fomites is crucial in determining the significance of fomite-mediated transmission and the potential use of fomites for environmental disease surveillance. We conducted a systematic review and meta-analysis to compile information on the occurrence of human viruses on fomites in the environment; we identified 134 peer-reviewed papers. We compiled sampling and measurement methods, results, quality control information, and whether virus data were compared with community health data from the papers. We conducted univariate and multivariate analyses to investigate if presence of virus on fomites was associated with virus type (enveloped, nonenveloped), sampling location (healthcare setting, nonhealthcare temporary setting, nonhealthcare nontemporary setting), and area of fomite swabbed (<50, 50-100, >100 cm2). Across 275 data sets from the 134 papers, there was the most data available for Coronaviridae and from fomites at hospitals. Positivity rates, defined as the percent positive fomite samples, were low (median = 6%). Data were available on viruses from 16 different viral families, but data on viruses from 9 families had few (n < 5) data sets. Many human virus families were not identified in this review (11 families). Less than 15% of the data sets reported virus concentrations in externally valid units (viruses per area of surface), and 16% provided a quantitative comparison between virus and health data. Virus type and area swabbed were significant predictors of virus presence on fomites, and the positivity rate of data sets collected from healthcare settings and nonhealthcare nontemporary settings (e.g., individual housing) were significantly higher than those collected in nonhealthcare temporary settings (e.g., restaurants). Data from this review indicates that viruses may be present on fomites, that fomite-mediated virus transmission may occur, and that fomites may provide information on circulation of infectious diseases in the community. However, more quantitative data on diverse viruses are needed, and method reporting needs significant improvements.

Viricidal Activity of Thermoplastic Polyurethane Materials with Silver Nanoparticles

The use of diverse Ag-based nanoparticulated forms has shown promising results in controlling viral propagation. In this study, a commercial nanomaterial consisting of ceramic-coated silver nanoparticles (AgNPs) was incorporated into thermoplastic polyurethane (TPU) plates using an industrial protocol, and the surface composition, ion-release dynamics and viricidal properties were studied. The surface characterization by FESEM-EDX revealed that the molar composition of the ceramic material was 5.5 P:3.3 Mg:Al and facilitated the identification of the embedded AgNPs (54.4 ± 24.9 nm). As determined by ICPMS, the release rates from the AgNP-TPU into aqueous solvents were 4 ppm/h for Ag and Al, and 28.4 ppm/h for Mg ions. Regarding the biological assays, the AgNP-TPU material did not induce significant cytotoxicity in the cell lines employed. Its viricidal activity was characterized, based on ISO 21702:2019, using the Spring viraemia of carp virus (SVCV), and then tested against the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). The results demonstrated that AgNP-TPU materials exhibited significant (75%) and direct antiviral activity against SVCV virions in a time- and temperature-dependent manner. Similar inhibition levels were found against SARS-CoV-2. These findings show the potential of AgNP-TPU-based materials as a supporting strategy to control viral spread.

The effectiveness of phototherapy for surface decontamination against SARS-Cov-2. A systematic review

COVID-19 appeared in December 2019, needing efforts of science. Besides, a range of light therapies (photodynamic therapy, ultraviolet [UV], laser) has shown scientific alternatives to conventional decontamination therapies. Investigating the efficacy of light-based therapies for environment decontamination against SARS-CoV2, a PRISMA systematic review of Phototherapies against SARS-CoV or MERS-CoV species discussing changes in viral RT-PCR was done. After searching MEDLINE/PubMed, EMBASE, and Literatura Latino-Americana e do Caribe em Ciências da Saúde we have found studies about cell cultures irradiation (18), blood components irradiation (10), N95 masks decontamination (03), inanimate surface decontamination (03), aerosols decontamination (03), hospital rooms irradiation (01) with PDT, LED, and UV therapy. The best quality results showed an effective low time and dose UV irradiation for environments and inanimate surfaces without human persons as long as the devices have safety elements dependent on the surfaces, viral charge, humidity, radiant exposure. To interpersonal contamination in humans, PDT or LED therapy seems very promising and are encouraged.

Novel Statistical Investigation for COVID-19 Community Response

A novel coronavirus (COVID-19) that highly affected the mortality rate on the global health crisis emerged to be a pandemic from November 19. COVID-19 is known as a severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). The virus was initially originated from bats and was transmitted to humans through unknown intermediary animals. The disease is transmitted by inhalation or contact with infected droplets, and the incubation period ranges till fourteen days. This paper presents a statistical investigation based on grey relational analysis on the four response criteria like confirmed cases, active cases, recovered cases and death cases from pre-lock down, lock down and unlock for different countries and all the states of India. Optimized results and ranking is calculated on the overall responses, and best selection is obtained.

Consolidating food safety measures against COVID-19

Background

The world is facing an extraordinarily unprecedented threat from the COVID-19 pandemic triggered by the SARS-CoV-2 virus. Global life has turned upside down, and that several countries closed their borders, simultaneously with the blockage of life cycle as a result of the shutdown of the majority of workplaces except the food stores and some few industries.

Main body

In this review, we are casting light on the nature of COVID-19 infection and spread, the persistence of SARS-CoV-2 virus in food products, and revealing the threats arising from the transmission of COVID-19 in food environment between stakeholders and even customers. Furthermore, we are exploring and identifying some practical aspects that must be followed to minimize infection and maintain a safe food environment. We also present and discuss some World Health Organization (WHO) guidelines-based regulations in food safety codes, destined to sustain the health safety of all professionals working in the food industry under this current pandemic.

Conclusion

The information compiled in this manuscript is supporting and consolidating the safety attributes in food environment, for a prospective positive impact on consumer confidence in food safety and the citizens’ public health in society. Some research is suggested on evaluating the use and potentiality of native and chemical modified basic proteins as possible practices aiming at protecting food from bacterial and viral contamination including COVID-19.

A cross-sectional study of epidemiological determinants for Covid-19 infection among nurses of a tertiary care hospital

BACKGROUND

All health care workers including nurses are working in the frontline against coronavirus disease 2019 (Covid-19), which keeps them at high risk of getting infected. This study was conducted to identify risk factors for Covid-19 infection and compliance to Covid appropriate behavior among nurses.

MATERIAL AND METHODS

A cross-sectional study was conducted on 150 nurses in a tertiary care hospital attached to a medical college in Mumbai, from April 2020 to December 2020. Data were collected telephonically using an interviewer-administered pre-validated, semi-structured questionnaire. Data entry and analysis were performed using SPSS version 21.0.

RESULTS

The mean age of the nurses was 38.19 ± 12.14 years. The majority (80.7%) were exposed to Covid-19 while taking active care of Covid patients; a total of 108 (72%) were symptomatic at the time of testing; dietary modifications because of fear of Covid were performed by 121 (80.2%); 92.77% used the appropriate personal protective equipment (PPE) category according to the workplace; 121 (80.77%) followed all steps of donning and doffing at all times, and 19 (12.77%) reported a breach in PPE. A greater proportion of nurses working in Covid duties opted for hospital isolation than home isolation (p = 0.003). Risk factors such as sleep, shift duty, shift pattern, food timing, mode of travel, and type of PPE during travel were also found to be significantly associated with work type - Covid versus non-Covid (p < 0.05).

CONCLUSIONS

Use of workplace appropriate PPE, proper donning and doffing facilities, duty shifts with a fixed duration, adequate hand hygiene practices, and regular food intake with adequate sleep can prevent Covid-19 infection at the workplace among nurses.

Oral Lesions Associated with COVID-19 and the Participation of the Buccal Cavity as a Key Player for Establishment of Immunity against SARS-CoV-2

BACKGROUND

Some oral lesions have been described in patients infected with severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2); the possibility has been raised that the buccal lesions observed in patients with the coronavirus disease 2019 (COVID-19) are due to this virus and the patient's systemic condition. The aim of this review was to integrate the knowledge related to the oral lesions associated with COVID-19 and the participation of the buccal cavity in the establishment of immunity against SARS-CoV-2.

METHODS

A literature search on the manifestations of buccal lesions from the beginning of the pandemic until October 2021 was carried out by using the PubMed database. A total of 157 scientific articles were selected from the library, which included case reports and reports of lesions appearing in patients with COVID-19.

RESULTS

Oral lesions included erosions, ulcers, vesicles, pustules, plaques, depapillated tongue, and pigmentations, among others. The oral cavity is a conducive environment for the interaction of SARS-CoV-2 with the mucosal immune system and target cells; direct effects of the virus in this cavity worsen the antiviral inflammatory response of underlying oral disorders, immunodeficiencies, and autoimmunity primarily.

CONCLUSIONS

The oral cavity is an accessible and privileged environment for the interaction of SARS-CoV-2 with the mucosal immune system and target cells; the direct effects of the virus in this cavity worsen the antiviral inflammatory response of underlying oral disorders, in particular those related to immunodeficiencies and autoimmunity.

Low risk of environmental contagion by SARS-CoV-2 in non-sanitary spaces

Objective

To study the presence of SARS-CoV-2 on surfaces (high, medium and low contact) and airs in non-sanitary spaces with high public influx to evaluate the risk of environmental contagion.

Methods

Surfaces and airs were analysed by RT-qPCR to detect the presence of SARS-CoV-2.

Results

394 surfaces and air samples were obtained from spaces with high public influx such as offices, shopping centres and nursing homes. The virus was not detected in any of the samples analysed.

Conclusion

Although we cannot emphatically conclude that there is no risk of environmental 27 infection by SARS-CoV-2 in non-sanitary spaces, we can affirm that the risk is almost non- existent.

Virucidal Efficacy of Laundering

Viruses contribute significantly to the burden of infectious diseases worldwide. Although there are multiple infection routes associated with viruses, it is important to break the chain of infection and thus consider all possible transmission routes. Consequently, laundering can be a means to eliminate viruses from textiles, in clinical settings well as for domestic laundry procedures. Several factors influence the survival and inactivation of microorganisms, including viruses on hard surfaces and textiles. Therefore, textiles should be regarded as potential fomites. While in clinical and industrial settings laundry hygiene is ensured by standardized processes, temperatures of at least 60 °C and the use of oxidizing agents, domestic laundry is not well defined. Thus, the parameters affecting viral mitigation must be understood and prudently applied, especially in domestic laundering. Laundering can serve as a means to break the chain of infection for viral diseases by means of temperature, time, chemistry and mechanical action.

Undergraduate dental students’ perspective of online learning and their physical and mental health during COVID-19 pandemic

Background and objective

COVID-19 pandemic continuously spread exacerbating global concerns. It had impacted all life aspects such as social, cultural, economic and education. This study assess the impact of COVID-19 pandemic on undergraduate dental students at Faculty of Dentistry, University of Malaya. The objective of this study is to evaluate the impact of the pandemic on physical and mental health of undergraduate dental students.

Methods

This is a cross-sectional study. An online questionnaire was administrated to 150 undergraduate dental students. The questionnaire included questions related to students’ demographic data, their concerns on academic achievement, their opinion on institution response, and the impact of the crisis on their mental and physical health. SPSS software v26.0 was used to analyse the collected data.

Results

A total of 147 respondents participated in the study. About 66% of the students felt comfortable in adapting to the new technology while 85.7% were concerned about the quality of online learning. Almost all students 98.6% expressed their doubts on the ability to pass the competency exams and to graduate on time, with only 49.7% agreed that clinical experience was effectively delivered through online classes. Most students were also concerned on the impact of the pandemic on their physical and emotional health 85.8% and 76.9% respectively.

Conclusions

The findings of our study highlight the positive adaptation of the students to online learning and using technology. On the other hand, the study indicates that the COVID-19 pandemic brings negative impacts on our students’ physical and mental health.

SARS-CoV-2: low virus load on surfaces in public areas

Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) has led people to implement preventive measures, including surface and hand disinfection with a disinfectant to avoid viral transmission. The detection of coronaviruses on surfaces implies not always a high danger of infection. Different coronaviruses and SARS-CoV-2 can be detected under experimental conditions on surfaces for many days. However, there are no studies concerning the virus load and the risk for an infection. The aim of our study was to find out if we could detect SARS-CoV-2 with a virus load greater than 10⁶ copies/mL in public areas under real-life conditions. A total of 1200 swabs were performed on different environmental surfaces in public areas: handholds, press buttons in buses, tramways, tubes, elevators, shops, doorknobs in public buildings, public restrooms, touchscreens in shops and public transportation services, supermarket trolleys, banknotes and coins and immediately tested. We used Rapid Covid-19 Antigen Test (Clinitest®) by Siemens Healthineers (Healgen Scientific Limited Liability Company, Houston, USA, respectively, Shanghai International Holding Corp. GmbH (Europe), Hamburg, Germany). During our study, we were not able to detect SARS-CoV-2 with a virus load greater than 10⁶ copies/ml although we pooled the swabs. According to the negative antigen tests and with a theoretically probability calculation of 1/24.000, there seems no relevant risk of infection with SARS-CoV-2 in public areas. For people with underlying diseases or immunosuppression, the risk of transmission respectively infectivity cannot be excluded with this study.

Impeding the Medical Protective Clothing Contamination by a Spray Coating of Trifunctional Polymers

The risk of fomite-mediated transmission in the clinic is substantially increasing amid the recent COVID-19 pandemic as personal protective equipment (PPE) of hospital workers is easily contaminated by direct contact with infected patients. In this context, it is crucial to devise a means to reduce such transmission. Herein, we report an antimicrobial, antiviral, and antibiofouling trifunctional polymer that can be easily coated onto the surface of medical protective clothing to effectively prevent pathogen contamination on the PPE. The coating layer is formed on the surfaces of PPE by the simple spray coating of an aqueous solution of the trifunctional polymer, poly(dodecyl methacrylate (DMA)-poly(ethylene glycol) methacrylate (PEGMA)-quaternary ammonium (QA)). To establish an optimal ratio of antifouling and antimicrobial functional groups, we performed antifouling, antibacterial, and antiviral tests using four different ratios of the polymers. Antifouling and bactericidal results were assessed using Staphylococcus aureus, a typical pathogenic bacterium that induces an upper respiratory infection. Regardless of the molar ratio, polymer-coated PPE surfaces showed considerable antiadhesion (∼65-75%) and antibacterial (∼75-87%) efficacies soon after being in contact with pathogens and maintained their capability for at least 24 h, which is sufficient for disposable PPEs. Further antiviral tests using coronaviruses showed favorable results with PPE coated at two specific ratios (3.5:6:0.5 and 3.5:5.5:1) of poly(DMA-PEGMA-QA). Moreover, biocompatibility assessments using the two most effective polymer ratios showed no recognizable local or systemic inflammatory responses in mice, suggesting the potential of this polymer for immediate use in the field.

Germi-X herbal-based spray disinfects smartphone surfaces: implication on fomite-mediated infection spread

Inanimate objects/surfaces become fomites upon contacting infectious agents such as disease-causing bacteria, fungi and viruses. Smartphones are one of the most prominent among these fomites. COVID-19 pandemic has raised the awareness on mobile sanitization, as an active measure to curb fomite-mediated viral transmission. Available mobile sanitizers and ultraviolet (UV) ray mediated mobile sanitization have their own sets of pros and cons, often being less user-friendly. This study explored the germicidal efficacy of an herbal-based sanitizer, Germi-X spray, on hands and mobiles, through microbiological techniques of micro-broth dilution and Kirby-Bauer disc diffusion assay, thumb print assay and swab test. Notably, Germi-X spray was found to be 6–67% more effective against surface pathogens, like, Staphylococcus epidermidis, Staphylococcus aureus, Pseudomonas fluorescens and Pseudomonas aeruginosa, as compared to a very popular product in the Indian market, which was taken as a control for this study. The observed anti-bacterial activity of the spray from disc-diffusion assay suggests its greater surface retentivity as compared to the control. Germicidal potency of Germi-X spray, when used to sanitize hands, was found to be greater than 80%. There was ~ 17-fold reduction in microbial counts after sanitizing smartphones with Germi-X spray. The novelty of this study lies in providing experimental evidence for this herbal-based surface sanitizer in efficiently disinfecting one of the super contaminated fomite, the smartphones. In conclusion, having an herbal base with a high germicidal efficacy against surface pathogens, together with longer surface retention, Germi-X spray appears to be an eco-friendly and cost-effective sanitizer for the surfaces of electronic gadgets like smartphones.

Gemini-Mediated Self-Disinfecting Surfaces to Address the Contact Transmission of Infectious Diseases

According to both the Center for Disease Control and the World Health Organization, contact transmission is the primary transmission route of infectious diseases worldwide. Usually, this is mitigated by a schedule of repeated regular sanitization, yet surfaces are easily re-contaminated in the interim between cleanings. One solution to this problem is to generate self-disinfecting surfaces that can display sustained virucidal/antimicrobial properties against pathogens that settle upon them. Quaternary ammonium organosilicon compounds are ideal candidates to achieve this; cationic surfactants are safe and well-established surface disinfectants, while organosilanes are used broadly to form durable coatings with altered surface properties on many different materials. Despite their potential to circumvent the disadvantages of traditional disinfection methods, extant commercially available quaternary ammonium silanes do not display comparable efficacy to the standard surface disinfectants, nor have their respective coatings been demonstrated to meet the Environmental Protection Agency's guidelines for residual/extended efficacy. Inspired by the powerful surface activity of double-headed "gemini" surfactants, here, we present gemini-diquaternary silanes (GQs) with robust residual germicidal efficacy on various surfaces by incorporating a second cationic "head" to the structure of a conventional monoquaternary ammonium silane (MQ). Aqueous solutions of GQs were tested in suspension- and surface-antimicrobial assays against an array of pathogens, including Staphylococcus aureus, Escherichia coli, Pseudomonas aeruginosa, and severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). GQ performance was benchmarked against the common disinfectants, ethanol, hydrogen peroxide, hypochlorite, as well as MQ. Solutions of GQs were efficacious when used for immediate disinfection (>10⁶-fold reduction in 15 s). Additionally, GQs were demonstrated to impart durable self-disinfecting properties to a variety of porous and nonporous surfaces, effective after repeated cycles of abrasion and repeated contaminations, and with superior coating ability and activity (>10⁸ higher activity) than that of MQs. GQs as surface treatments show great promise to overcome the limitations of traditional disinfectants in preventing the spread of infectious diseases.

Risks and new challenges in the food chain: Viral contamination and decontamination from a global perspective, guidelines, and cleaning

Even during the continuing world pandemic of severe acute respiratory syndrome coronavirus 2 (SARS CoV-2), consumers remain exposed to the risk of getting infected by existing, emerging, or re-emerging foodborne and waterborne viruses. SARS-CoV-2 is different in that it is transmitted directly via the airborne route (droplets and aerosols) or indirect contact (surfaces contaminated with SARS-CoV-2). International food and health organizations and national regulatory bodies have provided guidance to protect individuals active in food premises from potential occupational exposure to SARS-CoV-2, and have recommended chemicals effective in controlling the virus. Additionally, to exclude transmission of foodborne and waterborne viruses, hygiene practices to remove viral contaminants from surfaces are applied in different stages of the food chain (e.g., food plants, food distribution, storage, retail sector, etc.), while new and enhanced measures effective in the control of all types of viruses are under development. This comprehensive review aims to analyze and compare efficacies of existing cleaning practices currently used in the food industry to remove pathogenic viruses from air, nonfood, and food contact surfaces, as well as from food surfaces. In addition, the classification, modes of transmission, and survival of food and waterborne viruses, as well as SARS-CoV-2 will be presented. The international guidelines and national regulations are summarized in terms of virucidal chemical agents and their applications.

[Low risk of environmental contagion by SARS-CoV-2 in non-sanitary spaces]

Objetivo

Estudiar la presencia de SARS-CoV-2 en superficies (alto, medio y bajo contacto) y aires de espacios no sanitarios pero de elevada afluencia de público para evaluar el riesgo de contagio ambiental.

Método

Se ha realizado el análisis de las superficies y de los aires por RT-qPCR para detectar la presencia de SARS-CoV-2.

Resultados

Se obtuvieron 394 superficies y 23 muestras de aire de espacios de alta afluencia de personas, como oficinas, centros comerciales y residencias de ancianos. El virus no fue detectado en ninguna de las muestras analizadas.

Conclusión

Aunque no podemos concluir rotundamente que no existe un riesgo de infección ambiental por SARS-CoV-2 en espacios no sanitarios, sí podemos afirmar que el riesgo es casi nulo.

Prevention and control of coronavirus disease 2019 (COVID-19) in public places

Public places favor the transmission of Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) due to dense population, large personal mobility, and higher contact opportunities. In order to protect the health of general public in operating public places during COVID-19 pandemic, this study proposed general precautions and control strategies from perspective of operation management, social distancing, cleaning and disinfection, and personal protection. In addition, with regard of risk level, specific precautions and control strategies were proposed for living service places, outdoor places, and confined places. The comprehensive application of above recommendations could effectively interrupt the spread of COVID-19, and protect the health of general public in public places. This study proposed general and specific precautions and control strategies in public places during COVID-19, and suggested further improvement of pandemic response.

Stopping the COVID-19 pandemic in dental offices: A review of SARS-CoV-2 transmission and cross-infection prevention

Due to the essential role of dentists in stopping the COVID-19 pandemic, the purpose of this review is to help dentists to detect any weaknesses in their disinfection and cross-contamination prevention protocols, and to triage dental treatments to meet the needs of patients during the pandemic. We used PRISMA to identify peer-reviewed publications which supplemented guidance from the center for disease control about infection control and guidelines for dentists. Dentists must triage dental treatments to meet the needs of patients during the pandemic. The ongoing pandemic has changed the practice of dentistry forever, the changes make it more cumbersome, time-consuming, and costly due to the possible pathways of transmission and mitigation steps needed to prevent the spread of COVID-19. Dental chairside rapid tests for SARS-CoV-2 are urgently needed. Until then, dentists need to screen patients for COVID-19 even though 75% of people with COVID-19 have no symptoms. Despite the widespread anxiety and fear of the devastating health effects of COVID-19, only 61% of dentists have implemented a change to their treatment protocols. As an urgent matter of public health, all dentists must identify the additional steps they can take to prevent the spread of COVID-19. The most effective steps to stop the pandemic in dental offices are to; vaccinate all dentists, staff, and patients; triage dental treatments for patients, separate vulnerable patients, separate COVID-19 patients, prevent cross-contamination, disinfect areas touched by patients, maintain social distancing, and change personal protective equipment between patients.

Towards antiviral polymer composites to combat COVID-19 transmission

Polymer matrix composite materials have the capacity to aid the indirect transmission of viral diseases. Published research shows that respiratory viruses, including severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2 or COVID-19), can attach to polymer substrata as a result of being contacted by airborne droplets resulting from infected people sneezing or coughing in close proximity. Polymer matrix composites are used to produce a wide range of products that are "high-touch" surfaces, such as sporting goods, laptop computers and household fittings, and these surfaces can be readily contaminated by pathogens. This article reviews published research on the retention of SARS-CoV-2 and other virus types on plastics. The factors controlling the viral retention time on plastic surfaces are examined and the implications for viral retention on polymer composite materials are discussed. Potential strategies that can be used to impart antiviral properties to polymer composite surfaces are evaluated. These strategies include modification of the surface composition with biocidal agents (e.g., antiviral polymers and nanoparticles) and surface nanotexturing. The potential application of these surface modification strategies in the creation of antiviral polymer composite surfaces is discussed, which opens up an exciting new field of research for composite materials.

Effectiveness of antiviral metal and metal oxide thin-film coatings against human coronavirus 229E

Virucidal thin-film coatings have the potential to inactivate pathogens on surfaces, preventing or slowing their spread. Six potential nanoscale antiviral coatings, Cu, Cu2O, Ag, ZnO, zinc tin oxide (ZTO), and TiO2, are deposited on glass, and their ability to inactivate the HCoV-229E human coronavirus is assessed using two methods. In one method, droplets containing HCoV-229E are deposited on thin-film coatings and then collected after various stages of desiccation. In the second method, the thin-film coatings are soaked in the virus supernatant for 24 h. The Cu and Cu2O coatings demonstrate clear virucidal behavior, and it is shown that controlled delamination and dissolution of the coating can enhance the virucidal effect. Cu is found to produce a faster and stronger virucidal effect than Cu2O in the droplet tests (3 log reduction in the viral titer after 1 h of exposure), which is attributed, in part, to the differences in film adhesion that result in delamination of the Cu film from the glass and accelerated dissolution in the droplet. Despite Ag, ZnO, and TiO2 being frequently cited antimicrobial materials, exposure to the Ag, ZnO, ZTO, and TiO2 coatings results in no discernible change to the infectivity of the coronavirus under the conditions tested. Thin-film Cu coatings are also applied to the polypropylene fabrics of N95 respirators, and droplet tests are performed. The Cu fabric coating reduces the infectivity of the virus; it results in a 1 order-of-magnitude reduction in the viral titer within 15 min with a 2 order-of-magnitude reduction after 1 h.

Analysis of SARS-CoV-2 RNA on surfaces in New York City

Background

This study sought to determine the presence of SARS-CoV-2 virus on surfaces that trainees and faculty of an academic eye clinic came into contact with during daily life at the time of the COVID-19 pandemic in New York City.

Methods

This cross-sectional analysis involved collection of at least two samples by teams on four different days (November 9, 2020 – December 18, 2020) using sterile swabs (Puritan HydraFlock, Garden Grove, CA). Collection sites were grouped into four zones depending on proximity and amount of time personnel spent there. Samples were transported to the laboratory in transport medium and RNA was extracted using the QIAamp DSP Viral RNA Mini Kit (Qiagen, Germantown, MD). Presence of viral RNA was investigated using the Luna Universal Probe One-step RT–qPCR kit (New England Biolabs, Ipwsich, MA).

Results

834 samples were submitted. Two were positive for SARS-CoV-2 RNA. The first was a sample from a patient bathroom sink handle in the main emergency department. The second was a nasal swab sample from a staff member who had been assigned to collect samples. Prior to this positive result, this asymptomatic staff member had tested positive for COVID-19, had quarantined for two weeks, and had received a negative test.

Conclusion

Though COVID-19 is currently widespread in the United States, this study shows that health care personnel working in New York City at the Columbia University Irving Medical Center have a low chance of encountering viral RNA on surfaces they are in close contact with during daily life.

Nanotechnology based solutions to combat zoonotic viruses with special attention to SARS, MERS, and COVID 19: Detection, protection and medication

Zoonotic viruses originate from birds or animal sources and responsible for disease transmission from animals to people through zoonotic spill over and presents a significant global health concern due to lack of rapid diagnostics and therapeutics. The Corona viruses (CoV) were known to be transmitted in mammals. Early this year, SARS-CoV-2, a novel strain of corona virus, was identified as the causative pathogen of an outbreak of viral pneumonia in Wuhan, China. The disease later named corona virus disease 2019 (COVID-19), subsequently spread across the globe rapidly. Nano-particles and viruses are comparable in size, which serves to be a major advantage of using nano-material in clinical strategy to combat viruses. Nanotechnology provides novel solutions against zoonotic viruses by providing cheap and efficient detection methods, novel, and new effective rapid diagnostics and therapeutics. The prospective of nanotechnology in COVID 19 is exceptionally high due to their small size, large surface-to-volume ratio, susceptibility to modification, intrinsic viricidal activity. The nano-based strategies address the COVID 19 by extending their role in i) designing nano-materials for drug/vaccine delivery, ii) developing nano-based diagnostic approaches like nano-sensors iii) novel nano-based personal protection equipment to be used in prevention strategies.This review aims to bring attention to the significant contribution of nanotechnology to mitigate against zoonotic viral pandemics by prevention, faster diagnosis and medication point of view.

Impact of an automated multiple emitter whole-room ultraviolet-C disinfection system on hospital acquired infections: A quasi-experimental study

A quasi-experimental study performed in a pediatric hematology-oncology unit demonstrated that whole-room ultraviolet-C disinfection was associated with a significant reduction in hospital-onset Clostridioides difficile infection (P< .01, trend and level), but not healthcare-associated viral respiratory infections (P= .06 for trend, P= .36 for level) or central line-associated bloodstream infections (P> 0.75, trend and level).

COVID-19 global pandemic planning: Presence of SARS-CoV-2 fomites in a university hospital setting

As severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has surged across the globe, great effort has been expended to understand mechanisms of transmission and spread. From a hospital perspective, this topic is critical to limit and prevent SARS-CoV-2 iatrogenic transmission within the healthcare environment. Currently, the virus is believed to be transmitted primarily through respiratory droplets, but a growing body of evidence suggests that spread is also possible through aerosolized particles and fomites. Amidst a growing volume of patients with coronavirus disease 2019 (COVID-19), the purpose of this study was to evaluate the potential for SARS-CoV-2 transmission through fomites. Samples collected from the exposed skin of clinicians (n = 42) and high-touch surfaces (n = 40) were collected before and after encounters with COVID-19 patients. Samples were analyzed using two assays: the CDC 2019-nCoV Real-Time Reverse Transcription polymerase chain reaction (RT-qPCR) assay, and a SYBR Green assay that targeted a 121 bp region within the S-gene of SARS-CoV-2. None of the samples tested positive with the CDC assay, while two high-touch surface areas tested positive for SARS-CoV-2 using the Spike assay. However, viral culture did not reveal viable SARS-CoV-2 from the positive samples. Overall, the results from this study suggest that SARS-CoV-2 RNA were not widely present either on exposed skin flora or high-touch surface areas in the hospital locations tested. The inability to recover viable virus from samples that tested positive by the molecular assays, however, does not rule out the possibility of SARS-CoV-2 transmission through fomites.

Biofilms and Coronavirus Reservoirs: a Perspective Review

Bats are a key reservoir of coronaviruses (CoVs), including the agent of the severe acute respiratory syndrome, SARS-CoV-2, responsible for the recent deadly viral pneumonia pandemic. However, understanding how bats can harbor several microorganisms without developing illnesses is still a matter under discussion. Viruses and other pathogens are often studied as stand-alone entities, despite that, in nature, they mostly live in multispecies associations called biofilms-both externally and within the host. Microorganisms in biofilms are enclosed by an extracellular matrix that confers protection and improves survival. Previous studies have shown that viruses can secondarily colonize preexisting biofilms, and viral biofilms have also been described. In this review, we raise the perspective that CoVs can persistently infect bats due to their association with biofilm structures. This phenomenon potentially provides an optimal environment for nonpathogenic and well-adapted viruses to interact with the host, as well as for viral recombination. Biofilms can also enhance virion viability in extracellular environments, such as on fomites and in aquatic sediments, allowing viral persistence and dissemination. Moreover, understanding the biofilm lifestyle of CoVs in reservoirs might contribute to explaining several burning questions as to persistence and transmissibility of highly pathogenic emerging CoVs.

Surface touch network structure determines bacterial contamination spread on surfaces and occupant exposure

Fomites are known to spread infectious diseases, but their role in determining transmission risk remains unclear. The association of surface touch networks (STNs), proposed to explain this risk, with real-life surface contamination has not yet been demonstrated. To construct STNs, we collected surface touch data from 23 to 26 scholars through 2 independent experiments conducted in office spaces for 13 h each. In parallel, a tracer bacterium (Lactobacillus bulgaricus) was spread by a designated carrier in each experiment during normal activities; the subsequent extent of surface contamination was assessed using qPCR. The touch data were also analyzed using an agent-based model that predicted the observed contamination. Touching public (door handles) and hidden public (desks, chair seatbacks) surfaces that connected occupants, sparse hand-to-hand contact, and active carriers contributed significantly to contamination spread, which was also correlated with the size of the social group containing carriers. The natural and unsupervised experiments reflected realistic exposure levels of mouths (1-10 ppm of total contamination spread by one root carrier), nostrils (~1 ppm), and eyes (~0.1 ppm). We conclude that the contamination degree of known and hidden public surfaces can indicate fomite exposure risk. The social group effect could trigger superspreading events through fomite transmission.

Environmental contamination with SARS-CoV-2 in COVID-19 hospitals in Wuhan, China, 2020

Coronavirus disease 2019 (COVID-19) pandemic has caused high number of infections and deaths of healthcare workers globally. Distribution and possible transmission route of SARS-CoV-2 in hospital environment should be clarified. We herein collected 431 environmental (391 surface and 40 air) samples in the intensive care unit (ICU) and general wards (GWs) of three hospitals in Wuhan, China from February 21 to March 4, 2020, and detected SARS-CoV-2 RNA by real-time quantitative PCR. The viral positive rate in the contaminated areas was 17.8% (28/157), whereas there was no virus detected in the clean areas. Higher positive rate (22/59, 37.3%) was found in ICU than that in GWs (3/63, 4.8%). The surfaces of computer keyboards and mouse in the ICU were the most contaminated (8/10, 80.0%), followed by the ground (6/9, 66.7%) and outer glove (2/5, 40.0%). From 17 air samples in the contaminated areas, only one sample collected at a distance of around 30 cm from the patient was positive. Enhanced surface disinfection and hand hygiene effectively decontaminated the virus from the environment. This finding might help understand the transmission route and contamination risk of SARS-CoV-2 and evaluate the effectiveness of infection prevention and control measures in healthcare facilities.

A systematic review of human coronaviruses survival on environmental surfaces

The current pandemic caused by Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) has led people to implement preventive measures, including surface disinfection and use of alcohol-based hand gel, in order to avoid viral transmission via fomites. However, the role of surface transmission is still debated. The present systematic review aims to summarize all the evidence on surface survival of coronaviruses infecting humans. The analysis of 18 studies showed the longest coronavirus survival time is 28 days at room temperature (RT) on different surfaces: polymer banknotes, vinyl, steel, glass, and paper banknotes. Concerning SARS-CoV-2 human infection from contaminated surfaces, dangerous viral load on surfaces for up to 21 days was determined on polymer banknotes, steel, glass and paper banknotes. For viruses other than SARS-CoV-2, the longest period of survival was 14 days, recorded on glass. Environmental conditions can affect virus survival, and indeed, low temperatures and low humidity support prolonged survival of viruses on contaminated surfaces independently of surface type. Furthermore, it has been shown that exposure to sunlight significantly reduces the risk of surface transmission. Although studies are increasingly investigating the topic of coronavirus survival, it is difficult to compare them, given the methodology differences. For this reason, it is advisable to define a reference working protocol for virus survival trials, but, as an immediate measure, there is also a need for further investigations of coronavirus survival on surfaces.

Rhamnolipids Nano-Micelles as a Potential Hand Sanitizer

COVID-19 is a pandemic disease caused by the SARS-CoV-2, which continues to cause global health and economic problems since emerging in China in late 2019. Until now, there are no standard antiviral treatments. Thus, several strategies were adopted to minimize virus transmission, such as social distancing, face covering protection and hand hygiene. Rhamnolipids are glycolipids produced formally by Pseudomonas aeruginosa and as biosurfactants, they were shown to have broad antimicrobial activity. In this study, we investigated the antimicrobial activity of rhamnolipids against selected multidrug resistant bacteria and SARS-CoV-2. Rhamnolipids were produced by growing Pseudomonas aeruginosa strain LeS3 in a new medium formulated from chicken carcass soup. The isolated rhamnolipids were characterized for their molecular composition, formulated into nano-micelles, and the antibacterial activity of the nano-micelles was demonstrated in vitro against both Gram-negative and Gram-positive drug resistant bacteria. In silico studies docking rhamnolipids to structural and non-structural proteins of SARS-CoV-2 was also performed. We demonstrated the efficient and specific interaction of rhamnolipids with the active sites of these proteins. Additionally, the computational studies suggested that rhamnolipids have membrane permeability activity. Thus, the obtained results indicate that SARS-CoV-2 could be another target of rhamnolipids and could find utility in the fight against COVID-19, a future perspective to be considered.

A CFD study of the transport and fate of airborne droplets in a ventilated office: The role of droplet-droplet interactions

Previous studies reported that specially designed ventilation systems provide good air quality and safe environment by removing airborne droplets that contain viruses expelled by infected people. These water droplets can be stable in the environment and remain suspended in air for prolonged periods. Encounters between droplets may occur and droplet interactions should be considered. However, the previous studies focused on other physical phenomena (air flow, drag force, evaporation) for droplet transport and neglected droplet interactions. In this work, we used computational fluid dynamics (CFD) to simulate the transport and fate of airborne droplets expelled by an asymptomatic person and considered droplet interactions. Droplet drag with turbulence for prediction of transport and fate of droplets indicated that the turbulence increased the transport of 1 µm droplets, whereas it decreased the transport of 50 µm droplets. In contrast to only considering drag and turbulence, consideration of droplet interactions tended to increase both the transport and fate. Although the length scale of the office is much larger than the droplet sizes, the droplet interactions, which occurred at the initial stages of release when droplet separation distances were shorter, had a significant effect in droplet fate by considerably manipulating the final locations on surfaces where droplets adhered. Therefore, it is proposed that when an exact prediction of transport and fate is required, especially for high droplet concentrations, the effects of droplet interactions should not be ignored.

ELECTRONIC SUPPLEMENTARY MATERIAL

Supplementary material is available in the online version of this article at 10.1007/s11783-021-1465-8 and is accessible for authorized users.

Protective Measures against COVID-19: Dental Practice and Infection Control

The onset of the Coronavirus 2019 (COVID-19) pandemic has challenged the worldwide healthcare sector, including dentistry. The highly infectious nature of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) virus and risk of transmission through aerosol generating procedures has profoundly impacted the delivery of dental care services globally. As dental practices with renewed infection control strategies and preventive measures are re-opening in the "new normal" period, it is the responsibility of healthcare professionals to constantly analyze new data and limit the spread of COVID-19 in dental care settings. In the light of new variants of SARS-CoV-2 rapidly emerging in different geographic locations, there is an urgent need to comply more than ever with the rigorous public health measures to mitigate COVID-19 transmission. The aim of this article is to provide dental clinicians with essential information regarding the spread of SARS-CoV-2 virus and protective measures against COVID-19 transmission in dental facilities. We complied and provided guidance and standard protocols recommended by credible national and international organizations. This review will serve as an aid to navigating through this unprecedented time with ease. Here we reviewed the available literature recommended for the best current practices that must be taken for a dental office to function safely and successfully.

Modes of transmission of SARS-CoV-2 and evidence for preventive behavioral interventions

COVID-19 is a novel disease caused by SARS-CoV-2. During the global vaccination rollout, it is vital to thoroughly understand the modes of transmission of the virus in order to prevent further spread of variants and ultimately to end the pandemic. The current literature suggests that SARS-CoV-2 is transmitted among the human population primarily through respiratory droplets and, to a lesser extent, via aerosols. Transmission appears to be affected by temperature, humidity, precipitation, air currents, pH, and radiation in the ambient environment. Finally, the use of masks or facial coverings, social distancing, and hand washing are effective public health strategies in reducing the risk of exposure and transmission. Additional research is needed to further characterize the relative benefits of specific nonpharmaceutical interventions.

Repeated Exposure to Subinfectious Doses of SARS-CoV-2 May Promote T Cell Immunity and Protection against Severe COVID-19

Europe is experiencing a third wave of COVID-19 due to the spread of highly transmissible SARS-CoV-2 variants. A number of positive and negative factors constantly shape the rates of COVID-19 infections, hospitalization, and mortality. Among these factors, the rise in increasingly transmissible variants on one side and the effect of vaccinations on the other side create a picture deeply different from that of the first pandemic wave. Starting from the observation that in several European countries the number of COVID-19 infections in the second and third pandemic wave increased without a proportional rise in disease severity and mortality, we hypothesize the existence of an additional factor influencing SARS-CoV-2 dynamics. This factor consists of an immune defence against severe COVID-19, provided by SARS-CoV-2-specific T cells progressively developing upon natural exposure to low virus doses present in populated environments. As suggested by recent studies, low-dose viral particles entering the respiratory and intestinal tracts may be able to induce T cell memory in the absence of inflammation, potentially resulting in different degrees of immunization. In this scenario, non-pharmaceutical interventions would play a double role, one in the short term by reducing the detrimental spreading of SARS-CoV-2 particles, and one in the long term by allowing the development of a widespread (although heterogeneous and uncontrollable) form of immune protection.

SARS-CoV-2 in the environment-Non-droplet spreading routes

The new coronavirus SARS-CoV-2, first identified in Wuhan (China) in December 2019, represents the same family as the Serve Acute Respiratory Syndrome Coronavirus-1 (SARS-CoV-1). These viruses spread mainly via the droplet route. However, during the pandemic of COVID-19 other reservoirs, i.e., water (surface and ground), sewage, garbage, or soil, should be considered. As the infectious SARS-CoV-2 particles are also present in human excretions, such a non-droplet transmission is also possible. A significant problem is the presence of SARS-CoV-2 in the hospital environment, including patients' rooms, medical equipment, everyday objects and the air. Relevant is selecting the type of equipment in the COVID-19 hospital wards on which the virus particles persist the shortest or do not remain infectious. Elimination of plastic objects/equipment from the environment of the infected person seems to be of great importance. It is particularly relevant in water reservoirs contaminated with raw discharges. Wastewater may contain coronaviruses and therefore there is a need for expanding Water-Based Epidemiology (WBE) studies to use obtained values as tool in determination of the actual percentage of the SARS-CoV-2 infected population in an area. It is of great importance to evaluate the available disinfection methods to control the spread of SARS-CoV-2 in the environment. Exposure of SARS-CoV-2 to 65-70% ethanol, 0.5% hydrogen peroxide, or 0.1% sodium hypochlorite has effectively eliminated the virus from the surfaces. Since there are many unanswered questions about the transmission of SARS-CoV-2, the research on this topic is still ongoing. This review aims to summarize current knowledge on the SARS-CoV-2 transmission and elucidate the viral survival in the environment, with particular emphasis on the possibility of non-droplet transmission.

The role of respiratory droplet physicochemistry in limiting and promoting the airborne transmission of human coronaviruses: A critical review

Whether virulent human pathogenic coronaviruses (SARS-CoV, MERS-CoV, SARS-CoV-2) are effectively transmitted by aerosols remains contentious. Transmission modes of the novel coronavirus have become a hot topic of research with the importance of airborne transmission controversial due to the many factors that can influence virus transmission. Airborne transmission is an accepted potential route for the spread of some viral infections (measles, chickenpox); however, aerosol features and infectious inoculum vary from one respiratory virus to another. Infectious virus-laden aerosols can be produced by natural human respiratory activities, and their features are vital determinants for virus carriage and transmission. Physicochemical characteristics of infectious respiratory aerosols can influence the efficiency of virus transmission by droplets. This critical review identifies studies reporting instances of infected patients producing airborne human pathogenic coronaviruses, and evidence for the role of physical/chemical characteristics of human-generated droplets in altering embedded viruses' viability. We also review studies evaluating these viruses in the air, field studies and available evidence about seasonality patterns. Ultimately the literature suggests that a proportion of virulent human coronaviruses can plausibly be transmitted via the air, even though this might vary in different conditions. Evidence exists for respirable-sized airborne droplet nuclei containing viral RNA, although this does not necessarily imply that the virus is transmittable, capable of replicating in a recipient host, or that inoculum is sufficient to initiate infection. However, evidence suggests that coronaviruses can survive in simulated droplet nuclei for a significant time (>24 h). Nevertheless, laboratory nebulized virus-laden aerosols might not accurately model the complexity of human carrier aerosols in studying airborne viral transport. In summary, there is disagreement on whether wild coronaviruses can be transmitted via an airborne path and display seasonal patterns. Further studies are therefore required to provide supporting evidence for the role of airborne transmission and assumed mechanisms underlying seasonality.

Convolutional neural network for diagnosis of viral pneumonia and COVID-19 alike diseases

Reverse-Transcription Polymerase Chain Reaction (RT-PCR) method is currently the gold standard method for detection of viral strains in human samples, but this technique is very expensive, take time and often leads to misdiagnosis. The recent outbreak of COVID-19 has led scientists to explore other options such as the use of artificial intelligence driven tools as an alternative or a confirmatory approach for detection of viral pneumonia. In this paper, we utilized a Convolutional Neural Network (CNN) approach to detect viral pneumonia in x-ray images using a pretrained AlexNet model thereby adopting a transfer learning approach. The dataset used for the study was obtained in the form of optical Coherence Tomography and chest X-ray images made available by Kermany et al. (2018, https://doi.org/10.17632/rscbjbr9sj.3) with a total number of 5853 pneumonia (positive) and normal (negative) images. To evaluate the average efficiency of the model, the dataset was split into on 50:50, 60:40, 70:30, 80:20 and 90:10 for training and testing respectively. To evaluate the performance of the model, 10 K Cross-validation was carried out. The performance of the model using overall dataset was compared with the means of cross-validation and the currents state of arts. The classification model has shown high performance in terms of accuracy, sensitivity and specificity. 70:30 split performed better compare to other splits with accuracy of 98.73%, sensitivity of 98.59% and specificity of 99.84%.

Thermal discomfort in healthcare workers during the COVID-19 pandemic

INTRODUCTION

Due to the COVID-19 pandemic, healthcare workers are now required to use additional personal protective equipment (PPEs) to protect themselves against the virus. That led to an increased clothing insulation which is negatively affecting the perceived healthcare workers' thermal sensation.

OBJECTIVES

While demonstrating through software simulations the potential level of thermal discomfort healthcare workers involved in the COVID-19 emergency can be subjected to, this work aims at identifying measures to improve thermal sensation perception and acceptable thermal conditions for medical personnel.

METHODS

After having obtained the insulation values of individual clothing used by staff during COVID-19 emergency through the use of a thermal well-being evaluation software, the Fanger indexes (PMV - Predicted Mean Vote and PPD - Predicted Percentage of Dissatisfied) were calculated in order to estimate staff satisfaction to microclimatic conditions.

RESULTS

The use of COVID-19 additional PPEs with an air temperature equal to 22 °C (normally considered optimal) brings the PMV index equal to 0.6, which corresponds to 11.8 % being unsatisfied (PPD) due to perceived heat.

DISCUSSION

The use of additional protective devices significantly increases the clothing insulation level, facilitating the onset of conditions of thermal discomfort in the health workers. Workers engaged in the execution of nasopharyngeal swabs were most affected by the summer weather conditions and certainly represent the most critical category, for which it would be recommended to implement a higher turnover of service to reduce individual exposure time and consequent discomfort.

SARS-CoV-2 transmission via aquatic food animal species or their products: A review

Outbreaks of COVID-19 (coronavirus disease 2019) have been reported in workers in fish farms and fish processing plants arising from person-to-person transmission, raising concerns about aquatic animal food products' safety. A better understanding of such incidents is important for the aquaculture industry's sustainability, particularly with the global trade in fresh and frozen aquatic animal food products where contaminating virus could survive for some time. Despite a plethora of COVID-19-related scientific publications, there is a lack of reports on the risk of contact with aquatic food animal species or their products. This review aimed to examine the potential for Severe Acute Respiratory Syndrome-Coronavirus-2 (SARS-CoV-2) contamination and the potential transmission via aquatic food animals or their products and wastewater effluents. The extracellular viability of SARS-CoV-2 and how the virus is spread are reviewed, supporting the understanding that contaminated cold-chain food sources may introduce SAR-CoV-2 via food imports although the virus is unlikely to infect humans through consumption of aquatic food animals or their products or drinking water; i.e., SARS-CoV-2 is not a foodborne virus and should not be managed as such but instead through strong, multifaceted public health interventions including physical distancing, rapid contact tracing, and testing, enhanced hand and respiratory hygiene, frequent disinfection of high-touch surfaces, isolation of infected workers and their contacts, as well as enhanced screening protocols for international seafood trade.

Nurse Leaders Advocate for Nurses Across a Health Care System: COVID-19

The COVID-19 pandemic emphasizes the importance of nursing care globally. Nurses are the frontline staff in the care of individuals stricken with this highly infectious and deadly illness. Nurse leaders must advocate for nursing staff when staff are immersed in often overwhelming conditions. Through a case study, this article outlines how one healthcare system's Chief Nursing Officer council worked collaboratively, jointly and with the Emergency Incident Command Structure, to operationalize CDC guidelines and support, protect, educate, and empower staff. These initiatives resulted in creative solutions, technological advances for the system, and nursing staff and leaders rising to the challenge.

Nanobiotechnology as a platform for the diagnosis of COVID-19: a review

A sensitive method for diagnosing coronavirus disease 2019 (COVID-19) is highly required to fight the current and future global health threats due to severe acute respiratory syndrome coronavirus 2 (SARS-CoV 2). However, most of the current methods exhibited high false‐negative rates, resulting in patient misdiagnosis and impeding early treatment. Nanoparticles show promising performance and great potential to serve as a platform for diagnosing viral infection in a short time and with high sensitivity. This review highlighted the potential of nanoparticles as platforms for the diagnosis of COVID-19. Nanoparticles such as gold nanoparticles, magnetic nanoparticles, and graphene (G) were applied to detect SARS-CoV 2. They have been used for molecular-based diagnosis methods and serological methods. Nanoparticles improved specificity and shorten the time required for the diagnosis. They may be implemented into small devices that facilitate the self-diagnosis at home or in places such as airports and shops. Nanoparticles-based methods can be used for the analysis of virus-contaminated samples from a patient, surface, and air. The advantages and challenges were discussed to introduce useful information for designing a sensitive, fast, and low-cost diagnostic method. This review aims to present a helpful survey for the lesson learned from handling this outbreak to prepare ourself for future  pandemic.

Fighting viruses with materials science: Prospects for antivirus surfaces, drug delivery systems and artificial intelligence

OBJECTIVE

Viruses on environmental surfaces, in saliva and other body fluids represent risk of contamination for general population and healthcare professionals. The development of vaccines and medicines is costly and time consuming. Thus, the development of novel materials and technologies to decrease viral availability, viability, infectivity, and to improve therapeutic outcomes can positively impact the prevention and treatment of viral diseases.

METHODS

Herein, we discuss (a) interaction mechanisms between viruses and materials, (b) novel strategies to develop materials with antiviral properties and oral antiviral delivery systems, and (c) the potential of artificial intelligence to design and optimize preventive measures and therapeutic regimen.

RESULTS

The mechanisms of viral adsorption on surfaces are well characterized but no major breakthrough has become clinically available. Materials with fine-tuned physical and chemical properties have the potential to compromise viral availability and stability. Emerging strategies using oral antiviral delivery systems and artificial intelligence can decrease infectivity and improve antiviral therapies.

SIGNIFICANCE

Emerging viral infections are concerning due to risk of mortality, as well as psychological and economic impacts. Materials science emerges for the development of novel materials and technologies to diminish viral availability, infectivity, and to enable enhanced preventive and therapeutic strategies, for the safety and well-being of humankind.

COVID-19 pandemic crisis and food safety: Implications and inactivation strategies

BACKGROUND

The COVID-19 pandemic that emerged in 2019 has imposed huge consequences, including economic losses and threats to human health, which are still affecting many aspects throughout the world.

SCOPE AND APPROACH

This review provides an overview of SARS-CoV-2 infection, the cause of COVID-19, and explores its impact on the food supply system and food safety. This review examines the potential risk of transmission through food and environmental surfaces before discussing an effective inactivation strategy to control the COVID-19 pandemic in the aspect of food safety. This article also suggests effective food safety management post-COVID-19.

KEY FINDINGS AND CONCLUSIONS

Respiratory viruses including SARS-CoV-2 are responsible for huge impacts on the global economy and human health. Although food and water are not currently considered priority transmission routes of SARS-CoV-2, infection through contaminated food and environmental surfaces where the virus can persist for several days cannot be ignored, particularly when the surrounding environment is unhygienic. This approach could help determine the exact transmission route of SARS-CoV-2 and prepare for the post-COVID-19 era in the food safety sector.

[Is Disinfection of Public Surfaces useful for the Prevention of SARS-CoV-2 Infections?]

Measures to control SARS-CoV-2 often include the regular disinfection of public surfaces. The frequency of SARS-CoV-2 detection on surfaces in the surrounding of confirmed cases was evaluated in this systematic review. Overall, 26 studies showed 0 and 100% rates of contamination with SARS-CoV-2 RNA on surfaces in the surrounding of patients. Seven studies with at least 100 samples mostly showed detection rates between 1.4 and 19%. Two other studies did not detect infectious SARS-CoV-2 on any surface. Similar results were obtained from surfaces in the surrounding of confirmed SARS- and influenza-patients. A contamination of public surfaces with infectious virus is considerably less likely because there are much less potential viral spreaders around a surface, the contact time between a person and the surface is much shorter, and the asymptomatic carriers typically have no symptoms. In addition, a hand contact with a contaminated surface transfers only a small part of the viral load. A simple cleaning reduces the number of infectious viruses already by 2 log10-steps. That is why public surfaces should in general be cleaned because the wide use of biocidal agents for surface disinfection further increases the microbial selection pressure without an expectable health benefit.

COVID-19 infection in Hokkaido, Japan might depend on the viscosity of atmospheric air

BACKGROUND

The large number of people infected with severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has plunged the world into fear in recent times. In Japan, 18,769 novel coronavirus disease 2019 (COVID-19) cases have been reported as of June 30, 2020. This study aimed to assess whether cluster infection prevention is possible by evaluating the association between viral transmission and meteorological factors.

METHODS

This study included 1263 people who were successively diagnosed with COVID-19 in Hokkaido, Japan between January 24, 2020 and June 30, 2020. After obtaining the values from the Japanese Meteorological Agency, the average scores of air temperature and humidity were calculated and compared with COVID-19 reproduction numbers, and the association between COVID-19 incidence or reproduction number and meteorological factors was assessed.

RESULTS

The COVID-19 reproduction number in Hokkaido had three peaks that came several days before the surge in COVID-19 cases. The peaks are indicative of cluster infections. There was a strong negative correlation between the kinematic viscosity of atmospheric air and the reproduction number.

DISCUSSION AND CONCLUSION

Analysis of the reproduction number is important for predicting or suppressing COVID-19 infection clusters. The authors found a strong association between meteorological factors, such as kinematic viscosity of atmospheric air and the incidence of COVID-19 infection. Meteorological forecasts could provide foreknowledge about COVID-19 infection clusters in the future.

An integrative look at SARS‑CoV‑2 (Review)

SARS‑CoV‑2 is a newly discovered member of the betacoronaviruses and the etiological agent of the disease COVID‑19. SARS‑CoV‑2 is responsible for the worldwide pandemic which has been taking place in 2020, and is causing a markedly higher number of infections and deaths compared to previous coronaviruses, such as SARS‑CoV or MERS‑CoV. Based on updated scientific literature, the present review compiles the most relevant knowledge of SARS‑CoV‑2, COVID‑19 and the clinical and typical responses that patients have exhibited against this virus, discussing current and future therapies, and proposing strategies with which to combat the disease and prevent a further global threat. The aggressiveness of SARS‑CoV‑2 arises from its capacity to infect, and spread easily and rapidly through its tight interaction with the human angiotensin‑converting enzyme 2 (ACE‑2) receptor. While not all patients respond in a similar manner and may even be asymptomatic, a wide range of manifestations associated with COVID‑19 have been described, particularly in vulnerable population groups, such as the elderly or individuals with other underlying conditions. The proper function of the immune system plays a key role in an individual's favorable response to SARS‑CoV‑2 infection. A hyperactivated response, on the contrary, could account for the more severe cases of COVID‑19, and this may finally lead to respiratory insufficiency and other complications, such as thrombotic or thromboembolic events. The development of novel therapies and vaccines designed to control and regulate a proper immune system response will be key to clinical management, prevention measures and effective population screening to attenuate the transmission of this novel RNA virus.

Smart and Sustainable Nanotechnological Solutions in a Battle against COVID-19 and Beyond: A Critical Review

The variety of available biocidal features make nanomaterials promising for fighting infections. To effectively battle COVID-19, categorized as a pandemic by the World Health Organization (WHO), materials scientists and biotechnologists need to combine their knowledge to develop efficient antiviral nanomaterials. By design, nanostructured materials (spherical, two-dimensional, hybrid) can express a diverse bioactivity and unique combination of specific, nonspecific, and mixed mechanisms of antiviral action. It can be related to the material's specific features and their multiple functionalization strategies. This is a complex guiding approach in which an interaction target is constantly moving and quickly changing. On the other hand, in such a rush, sustainability may be put aside. Therefore, to elucidate the most promising nanotechnological solutions, we critically review available data within the frame of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) and other types of viruses. We highlight solutions that are, or could be, more sustainable and less toxic. In this regard, reduction of the number of synthetic routes, organic solvents, byproducts, and residues is highly recommended. Such efficient, green solutions may be further used for the prevention of virion-host interactions, treatment of the already developed infection, reducing inflammation, and finally, protecting healthcare professionals with masks, fabrics, equipment, and in other associated areas. Further translation into the market needs putting on the fast track with respect to principles of green chemistry, feasibility, safety, and the environment.

Multi-route transmission potential of SARS-CoV-2 in healthcare facilities

Understanding the transmission mechanism of SARS-CoV-2 is a prerequisite to effective control measures. To investigate the potential modes of SARS-CoV-2 transmission, 21 COVID-19 patients from 12-47 days after symptom onset were recruited. We monitored the release of SARS-CoV-2 from the patients' exhaled breath and systematically investigated environmental contamination of air, public surfaces, personal necessities, and the drainage system. SARS-CoV-2 RNA was detected in 0 of 9 exhaled breath samples, 2 of 8 exhaled breath condensate samples, 1 of 12 bedside air samples, 4 of 132 samples from private surfaces, 0 of 70 samples from frequently touched public surfaces in isolation rooms, and 7 of 23 feces-related air/surface/water samples. The maximum viral RNA concentrations were 1857 copies/m3 in the air, 38 copies/cm2 in sampled surfaces and 3092 copies/mL in sewage/wastewater samples. Our results suggest that nosocomial transmission of SARS-CoV-2 can occur via multiple routes. However, the low detection frequency and limited quantity of viral RNA from the breath and environmental specimens may be related to the reduced viral load of the COVID-19 patients on later days after symptom onset. These findings suggest that the transmission dynamics of SARS-CoV-2 differ from those of SARS-CoV in healthcare settings.

Evidences of SARS-CoV-2 virus air transmission indoors using several untouched surfaces: A pilot study

Nowadays, there is an important controversy about coronavirus air transmission. The aim of this study was to determine aerosol transmission from patients with coronavirus infection using "COVID-19 traps" that included different untouched surfaces within them. 42 swab samples of 6 different surfaces placed in the rooms of 6 patients with a positive diagnostic of COVID-19 were analyzed with RT-PCR technique to evaluate the presence of the virus and its stability. Samples were collected at 24, 48 and 72 h. Patients were in an intensive care unit (ICU) and in a COVID-19 ward unit (CWU) at a Spanish referral hospital. None of the samples placed in the ICU unit were positive for COVID-19. However, two surfaces, placed in a CWU room with a patient that required the use of respiratory assistance were positive for coronavirus at 72 h. Surfaces could not be touched by patients or health workers, so viral spreading was unequivocally produced by air transmission. Thus, fomites should be considered as a possible mode of transmission of coronavirus and frequent disinfection of surfaces should be taken into account. Our results, although preliminary, point the importance of SARS-CoV-2 virus air transmission indoors and may shed some light in this debate.