Modification of plant proteins for improved functionality: A review

Synergistic effect of gellan gum and guar gum on improving the foaming properties of soy protein isolate-based complexes: Interaction mechanism and interfacial behavior

Interactions among multi-component play a critical role in modulating the foaming properties of aerated foods. This study evaluated the mechanisms of synergistic improvement of gellan gum (GEG) and guar gum (GUG) on the foaming properties of soy protein isolate (SPI)-based complex. The results showed that the GEG/GUG ratio was closely related to the intermolecular interactions of SPI-based ternary complex and the dynamical changing of its foaming properties. The SPI/GEG/GUG ternary complex with a GEG/GUG ratio of 2/3 exhibited the highest foamability (195 %) and comparable foam stability (99.17 %), which were 32.95 % and 2.99 % higher than that of SPI/GEG binary complex. At this ratio, GUG promoted the interactions between SPI and GEG, and bound to complex's surface through hydrogen bonding, resulting in the increase of particle size and surface charge, and the decrease of surface hydrophobicity. Although this reduced the diffusion of complex onto the air/water interface, it increased permeation rate and molecular rearrangement behavior, which were the potential mechanisms to improve the foaming properties. Additionally, the synergistic effect of GEG and GUG also enhanced the elastic strength and solid characteristics of foam systems. This study provided a theoretical guidance for the targeted modulation of foaming properties of multi-component aerated foods.

On the modification of plant proteins: Traditional methods and the Hofmeister effect

With increasing consumer health awareness and demand from some vegans, plant proteins have received a lot of attention. Plant proteins have many advantages over animal proteins. However, the application of plant proteins is limited by a number of factors and there is a need to improve their functional properties to enable a wider range of applications. This paper describes the advantages and disadvantages of traditional methods of modifying plant proteins and the appropriate timing for their use, and collates and describes a method with fewer applications in the food industry: the Hofmeister effect. It is extremely simple but efficient in some respects compared to traditional methods. The paper provides theoretical guidance for the further development of plant protein-based food products and a reference value basis for improving the functional properties of proteins to enhance their applications in the food industry, pharmaceuticals and other fields.

High-pressure microfluidisation positively impacts structural properties and improves functional characteristics of almond proteins obtained from almond meal

Almond protein isolate (API) obtained from almond meal was processed using dynamic high-pressure microfluidisation (0, 40, 80, 120, and 160 MPa pressure; single pass). Microfluidisation caused significant reductions in the particle size and increased absolute zeta potential. SDS-PAGE analysis indicated reduction in band intensity and the complete disappearance of bands beyond 80 MPa. Structural analysis (by circular dichroism, UV-Vis, and intrinsic-fluorescence spectra) of the API revealed disaggregation (up to 80 MPa) and then re-aggregation beyond 80 MPa. Significant increments in protein digestibility (1.16-fold) and the protein digestibility corrected amino acid score (PDCAAS; 1.15-fold) were observed for the API (80 MPa) than control. Furthermore, significant improvements (P < 0.05) in the functional properties were observed, viz., the antioxidant activity, protein solubility, and emulsifying properties. Overall, the results revealed that moderate microfluidisation treatment (80 MPa) is an effective and sustainable technique for enhancing physico-chemical and functional attributes of API, thus potentially enabling its functional food/nutraceuticals application.

A comprehensive review on the recent trends in extractions, pretreatments and modifications of plant-based proteins

Plant-based proteins offer sustainable and nutritious alternatives to animal proteins with their techno-functional attributes influencing product quality and designer food development. Due to the inherent complexities of plant proteins, proper extraction and modifications are vital for their effective utilization. This review highlights the emerging sources of plant-based proteins, and the recent statistics of the techniques employed for pretreatment, extraction, and modifications. The pretreatment, extraction and modification approach to modify plant proteins have been classified, addressed, and the recent applications of such methodologies are duly indicated. Furthermore, this study furnishes novel perspectives regarding the potential impacts of emerging technologies on the intricate dynamics of plant proteins. A thorough review of 100 articles (2018-2024) shows the researchers' keen interest in investigating novel plant proteins and how they can be used; seeds being the main source for protein extraction, followed by legumes. Use of by-products as a protein source is increasing rapidly, which is noteworthy. Protein studies still lack knowledge on protein fraction, antinutrients, and pretreatments. The use of physical methods and their combination with other techniques are increasing for effective and environmentally friendly extraction and modification of plant proteins. Several studies explore the effect of protein changes on their function and nutrition, especially with a goal of replacing ingredients with plant proteins that have improved or enhanced qualities. However, the next step is to investigate the sophisticated modification methods for deeper insights into food safety and toxicity.

Smart proteins as a new paradigm for meeting dietary protein sufficiency of India: a critical review on the safety and sustainability of different protein sources

India, a global leader in agriculture, faces sustainability challenges in feeding its population. Although primarily a vegetarian population, the consumption of animal derived proteins has tremendously increased in recent years. Excessive dependency on animal proteins is not environmentally sustainable, necessitating the identification of alternative smart proteins. Smart proteins are environmentally benign and mimic the properties of animal proteins (dairy, egg and meat) and are derived from plant proteins, microbial fermentation, insects and cell culture meat (CCM) processes. This review critically evaluates the technological, safety, and sustainability challenges involved in production of smart proteins and their consumer acceptance from Indian context. Under current circumstances, plant-based proteins are most favorable; however, limited land availability and impending climate change makes them unsustainable in the long run. CCM is unaffordable with high input costs limiting its commercialization in near future. Microbial-derived proteins could be the most sustainable option for future owing to higher productivity and ability to grow on low-cost substrates. A circular economy approach integrating agri-horti waste valorization and C1 substrate synthesis with microbial biomass production offer economic viability. Considering the use of novel additives and processing techniques, evaluation of safety, allergenicity, and bioavailability of smart protein products is necessary before large-scale adoption.

Fabrication and characterization of non-fat whipped cream analogue: Effects of type and concentration of polysaccharide

In the present study, the non-fat whipped cream analogue was formulated by the combination of soy protein isolate, different polysaccharides and sucrose. Compared with single polysaccharide, the combined polysaccharide showed synergistic effect on formulating the non-fat whipped cream with better properties. The non-fat whipped creams showed high overrun (up to 570 %), excellent drainage stability (no drainage occurred within 120 min) and comparable hardness (up to 1.1 N) than that of control (a commercially dairy whipped cream). Moreover, the non-fat whipped creams were all solid-like (storage modulus > loss modulus) and exhibited outstanding shape retention ability. These properties were greatly affected by the types and ratios of combined polysaccharide. The combination of anionic and neutral polysaccharides was more beneficial for its properties, and the effect depended on the combined ratios. Especially for samples containing gellan gum/guar gum, their appearance only changed slightly after standing for 60 min, and simultaneously showed satisfying sensory acceptability when the combined ratio was 2/3. Therefore, these novel non-fat whipped creams could be popularized as the functional products aiming at specific groups such as diabetes and obesity people in the future.

Compatibility of pulse protein in the formulation of plant based yogurt: a review of nutri-functional properties and processing impact

With the increased environmental concerns and health awareness among consumers, there has been a notable interest in plant-based dairy alternatives. The plant-based yogurt market has experienced rapid expansion in recent years. Due to challenges related to cultivation, higher cost of production and lower protein content researchers have explored the viability of pulse-based yogurt which has arisen as an economically and nutritionally abundant solution. This review aims to examine the feasibility of utilizing pulse protein for yogurt production. The nutritional, antinutritional, and functional characteristics of various pulses were discussed in detail, alongside the modifications in these properties during the various stages of yogurt manufacturing. The review also sheds light on pivotal findings from existing literature and outlines challenges associated with the production of pulse-based yogurt. Pulses have emerged as promising base materials for yogurt manufacturing due to their favorable nutritional and functional characteristics. Further, the fermentation process can effectively reduce antinutritional components and enhance digestibility. Nonetheless, variations in sensorial and rheological properties were noted when different types of pulses were employed. This issue can be addressed by employing suitable combinations to achieve the desired properties in pulse-based yogurt.

Influence of dual succinylation and ultrasonication modification on the amino acid content, structural and functional properties of Chickpea (Cicer arietinum L.) protein concentrate

Chickpea protein, a valuable plant-based source, offers versatile applications, yet the impact of modifications like succinylation and ultrasonication on its properties remains unclear. This study explored dual succinylation and ultrasonication modification to enhance its functionality and application. Modified chickpea protein with a degree of succinylation of 96.75 %, showed enhanced water holding capacity 39.83 %, oil holding capacity 54.02 %, solubility 7.20 %, and emulsifying capacity 23.17 %, compared to native protein. Despite reduced amino acid content (64.50 %), particularly lysine, succinylation increased sulfhydryl by 1.74 %, reducing hydrophobicity (Ho) by 41.87 % and causing structural changes. Ultrasonication further reduced particle size by 82.57 % and increased zeta potential and amino acid content (57.47 %). The dual-modified protein exhibited a non-significant increase in antimicrobial activity against Staphylococcus aureus (25.93 ± 1.36 mm) compared to the native protein (25.28 ± 1.05 mm). In conclusion, succinylation combined with ultrasonication offers a promising strategy to enhance chickpea protein's physicochemical properties for diverse applications.

Walnut protein isolate based emulsion as a promising delivery system enhanced lutein bioaccessibility

Lutein, a natural pigment with multiple beneficial bioactivities, faces limitations in food processing due to its instability. In this study, we constructed four modified walnut protein isolate (WNPI) based emulsions as emulsion-based delivery systems (EBDS) for lutein fortification. The modification treatments enhanced the encapsulation efficiency of the WNPI-based EBDS on lutein. The modified WNPI-based EBDS exhibited improved storage and digestive stability, as well as increased lutein delivery capability in simulated gastrointestinal conditions. After in vitro digestion, the lutein retention in the modified WNPI-based EBDS was higher than in the untreated WNPI-based EBDS, with a maximum retention of 49.67 ± 1.10 % achieved after ultrasonic modification. Furthermore, the modified WNPI-based EBDS exhibited an elevated lutein bioaccessibility, reaching a maximum value of 40.49 ± 1.29 % after ultrasonic modification, nearly twice as high as the untreated WNPI-based EBDS. Molecular docking analysis indicated a robust affinity between WNPI and lutein, involving hydrogen bonds and hydrophobic interactions. Collectively, this study broadens WNPI's application and provides a foundation for fortifying other fat-soluble bioactive substances.

Extraction and improvement of protein functionality using steam explosion pretreatment: advances, challenges, and perspectives

Protein has become an increasingly valuable food component with high global demand. Consequently, unconventional sources, such as industrial and agroindustrial wastes and by-products, emerge as interesting alternatives to meet this demand, considering the UN Sustainable Development Goals and the transition to a circular economy. In this context, this work presents a review of the use of Steam Explosion (SE), a green technique that can be employed as a pretreatment for various waste materials, including bones, hide/leather, feathers, and wool, aimming the extraction of protein compounds, such as low molecular weight biopeptides, gelatin, and keratin, as well as to enhance the protein functionality of grains and meals. The SE technique and the main factors affecting the process's efficiency were detailed. Promising experimental studies are discussed, along with the mechanisms responsible for protein extraction and functionality improvement, as well as the main reported and suggested applications. In general, steam explosion favored yields in subsequent extraction processes, ranging from 27 to 95%, in addition to enhancing solubility and functional protein properties. Nonetheless, it is crucial to maintain the continuity of research on this topic to drive advancements in ensuring the safety of the extracted compounds for use in consumable products and oral ingestion.

Mung bean protein isolate: Extraction, structure, physicochemical properties, modifications, and food applications

The intake of plant-based proteins is rapidly growing around the world due to their nutritional and functional properties, as well as growing demand for vegetarian and vegan diets. Mung bean seeds have been traditionally consumed in Asian countries due to their unique botanical and health-promoting characteristics. In recent years, mung bean protein isolate (MBPI) has attracted much attention due to its ideal techno-functional features, such as water and oil absorption capacity, solubility, emulsifying, foaming, and thermal properties. Therefore, it can be utilized in a native or modified form in different food sectors, such as biodegradable/edible films, colloidal systems, and plant-based alternative products. This study provides a comprehensive review on the extraction methods, amino acid profile, structure, physicochemical properties, modifications, and food applications of MBPI.

Opportunities to produce food from substantially less land

The vast majority of the food we eat comes from land-based agriculture, but recent technological advances in agriculture and food technology offer the prospect of producing food using substantially less or even virtually no land. For example, indoor vertical farming can achieve very high yields of certain crops with a very small area footprint, and some foods can be synthesized from inorganic precursors in industrial facilities. Animal-based foods require substantial land per unit of protein or per calorie and switching to alternatives could reduce demand for some types of agricultural land. Plant-based meat substitutes and those produced through fermentation are widely available and becoming more sophisticated while in the future cellular agricultural may become technically and economical viable at scale. We review the state of play of these potentially disruptive technologies and explore how they may interact with other factors, both endogenous and exogenous to the food system, to affect future demand for land.

Application of soy protein isolate-naringenin complexes as fat replacers in low-fat cream: Based on protein conformational changes, aggregation states and interfacial adsorption behavior

In this study, changes in the structural and functional properties of soybean protein isolate (SPI)-naringenin (NG) complexes under different amounts of naringenin treatments were explored, elucidating the effect of the complexes as fat replacers at the 15 % substitution level on the properties of low-fat cream. Finally, the correlation between the structure and function of the complex and the properties of low-fat cream was further analyzed. The addition of NG promotes the increase of SPI aggregation and particle size, and reduces the interfacial tension of the complex. Meanwhile, at the mass ratio of 48:3, NG and SPI formed a dendritic network structure suitable for stabilizing cream. The fat properties of cream indicate that low-fat creams stabilized by appropriate proportions of SPI-NG complexes displayed small and dense fat crystal network structures. In addition, low-fat cream stabilized by the SPI-NG complexes have improved whipping time, overrun, firmness, storage stability and rheological properties compared to natural SPI. It is worth noting that the overall quality of the cream stabilized by the SPI-NG complex with a mass ratio of 48:3 was almost close to that of full-fat cream. Therefore, this study promotes the potential applications of protein-polyphenol complexes as fat replacers in the food industry.

A comparative evaluation of the structure, functionality and volatile profiles of Trichosanthes kirilowii seed protein isolates based on different extraction methods

In the present study, we hypothesised that Trichosanthes kirilowii seed protein isolate (TPI) obtained by different extraction methods have distinct structure, functional attributes and volatile profiles. Alkaline-extracted isolate (AE-TPI) exhibited lower protein content and a darker colour than the other two isolates because more polyphenols and pigments were coextracted. Salt-extracted isolate (SE-TPI) and AE-TPI had higher in vitro protein digestibility than reverse micelle-extracted isolate (RME-TPI) due to higher degrees of denaturation, which enabled them to be more susceptible to proteolysis. The SE-TPI gel resulted in a stronger gel network and greater hardness than the other two isolate gels. In the volatile profile, SE-TPI (22) yielded the largest number of volatile compounds, followed by AE-TPI (20) and RME-TPI (15). The current results indicated that the structure, functional properties and volatile profiles of TPI are largely influenced by the extraction technique.

Innovative method for producing plant-based meat analogs: Acid/calcium-induced internal gelation of potato protein/alginate composites

When creating plant-based meat analogs, it is often challenging to mimic the structural and textural attributes of real meat products during the cooking process. In this study, we investigated the potential of using potato protein/calcium alginate composite gels to formulate plant-based meat analogs. These gels provide a semi-solid texture at ambient temperature that remains intact during cooking because the electrostatic crosslinks are resistant to heat. Composite gels consisting of potato protein (10 wt%) and alginate (0-2 wt%) were prepared using the internal gelation method. This method involves dispersing an insoluble form of calcium (CaHPO4) throughout the protein-polysaccharide matrix and then using glucono-delta-lactone (GDL) to slowly lower the pH, thereby releasing the Ca2+ ions evenly throughout the system. The calcium alginate increased the strength of the potato protein gels and provided structural resistance to heat. Appreciable water loss occurred during cooking for simple calcium alginate gels, but this was prevented when potato proteins were present. Increasing the alginate concentration from 0 to 1.5 % increased the strength of the composite gels but higher levels promoted phase separation and network disruption, which reduced the gel strength. Heating did not appreciably alter the microstructure of the composite gels, but it did alter that of the pure potato protein gels. Finally, the potential of the composite gels as plant-based meat analogs was assessed by comparing their thermal denaturation and textural properties to those of real chicken breast. The potato protein/alginate composites were shown to simulate the thermal denaturation and textural changes of real chicken during the cooking process. Overall, our results suggest that calcium alginate gels may be useful in the formulation of plant-based meat products with improved cooking properties.

Technological challenges and future perspectives of plant-based meat analogues: From the viewpoint of proteins

The global demand for high-quality animal protein faces challenges, prompting a surge in interest in plant-based meat analogues (PBMA). PBMA have emerged as a promising solution, although they encounter technological obstacles. This review discusses the technological challenges faced by PBMA from the viewpoint of plant proteins, emphasizing textural, flavor, color, and nutritional aspects. Texturally, PBMA confront issues, such as deficient fibrous structure, chewiness, and juiciness. Addressing meat flavor and mitigating beany flavor in plant protein are imperative. Furthermore, achieving a distinctive red or pink meat color remains a challenge. Plant proteins exhibit a lower content of essential amino acids. Future research directions encompass (1) shaping myofibril fibrous structures through innovative processing; (2) effectively eliminating the beany flavor; (3) developing biotechnological methodologies for leghemoglobin and plant-derived pigments; (4) optimizing amino acid composition to augment the nutritional profiles. These advancements are crucial for utilization of plant proteins in development of high-quality PBMA.

Insights into Cold Plasma Treatment on the Cereal and Legume Proteins Modification: Principle, Mechanism, and Application

Cereal and legume proteins, pivotal for human health, significantly influence the quality and stability of processed foods. Despite their importance, the inherent limited functional properties of these natural proteins constrain their utility across various sectors, including the food, packaging, and pharmaceutical industries. Enhancing functional attributes of cereal and legume proteins through scientific and technological interventions is essential to broadening their application. Cold plasma (CP) technology, characterized by its non-toxic, non-thermal nature, presents numerous benefits such as low operational temperatures, lack of external chemical reagents, and cost-effectiveness. It holds the promise of improving proteins' functionality while maximally retaining their nutritional content. This review delves into the pros and cons of different cold plasma generation techniques, elucidates the underlying mechanisms of protein modification via CP, and thoroughly examines research on the application of cold plasma in augmenting the functional properties of proteins. The aim is to furnish theoretical foundations for leveraging CP technology in the modification of cereal and legume proteins, thereby enhancing their practical applicability in diverse industries.

Pretreatment with low-frequency magnetic fields can improve the functional properties of pea globulin amyloid-like fibrils

Plant protein fibrils have recently attracted considerable attention due to their superior mechanical and interfacial properties. The objective of this study was to evaluate the feasibility of low-frequency magnetic field (LF-MF) pretreatment in enhancing the conversion and functional characteristics of the amyloid-like fibrils derived from pea globulin (PG), which was considered a sustainable hypoallergenic protein. The results showed that LF-MF-treated PG (MPG) assembled into longer amyloid-like fibrils compared with native PG (NPG). The MPG presented similar gelling, emulsifying, and foaming properties to the NPG, while the fibril samples exhibited significantly improved functional properties. Moreover, the amyloid-like fibrils generated from the MPG (MPGF) showed large aspect ratios accompanied by superior solubility, molecular flexibility, emulsion stability, and gelling properties. The improved functional properties of the amyloid-like fibrils generated from the MPG can provide a promising outlook for expanding the applications of the PG in food, medicine and other fields.

Extraction, Modification, Biofunctionality, and Food Applications of Chickpea (Cicer arietinum) Protein: An Up-to-Date Review

Plant-based proteins have gained popularity in the food industry as a good protein source. Among these, chickpea protein has gained significant attention in recent times due to its high yields, high nutritional content, and health benefits. With an abundance of essential amino acids, particularly lysine, and a highly digestible indispensable amino acid score of 76 (DIAAS), chickpea protein is considered a substitute for animal proteins. However, the application of chickpea protein in food products is limited due to its poor functional properties, such as solubility, water-holding capacity, and emulsifying and gelling properties. To overcome these limitations, various modification methods, including physical, biological, chemical, and a combination of these, have been applied to enhance the functional properties of chickpea protein and expand its applications in healthy food products. Therefore, this review aims to comprehensively examine recent advances in Cicer arietinum (chickpea) protein extraction techniques, characterizing its properties, exploring post-modification strategies, and assessing its diverse applications in the food industry. Moreover, we reviewed the nutritional benefits and sustainability implications, along with addressing regulatory considerations. This review intends to provide insights into maximizing the potential of Cicer arietinum protein in diverse applications while ensuring sustainability and compliance with regulations.

Heat-Induced Gelation of Chickpea and Faba Bean Flour Ingredients

This study aimed to investigate the gelling behavior of faba bean (FB) and chickpea (CP) flour between 10 and 20% (w/w) concentration at pH 3.0, 5.0, and 7.0. Both sources formed at pH 3.0 and 5.0 self-standing gels with 12% (w/w) of flour, while 16% (w/w) of flour was required to obtain a gel at pH 7.0. During gelling between 40 and 70 °C, a sharp increase of the elastic modulus G' was observed in both flours, mainly due to water absorption and swelling of the starch, one of the major constituents in the ingredients. Increasing the temperature at 95 °C, G' increased due to the denaturation of globulins and therefore the exposure of their internal part, which allowed more hydrophobic interactions and the formation of the gel. After cooling, both FB and CP gels displayed a solid-like behavior (tan δ ranging between 0.11 and 0.18) with G' values at pH 3.0 and 5.0 significantly (p < 0.05) higher than those at pH 7.0, due to the lower electrostatic repulsions at pHs far from the isoelectric point. The rheological properties were supported by the water binding capacity values, confirming the better gels' strength described by rheological analysis. These results will enhance our understanding of the role of legume flours in formulating innovative and sustainable food products as alternatives to animal ones.

Modification of the physicochemical, functional, biochemical and structural properties of a soursop seed (Annona muricata L.) protein isolate treated with high-intensity ultrasound

The obtained seeds from fruit processing are considered by-products containing proteins that could be utilized as ingredients in food manufacturing. However, in the specific case of soursop seeds, their usage for the preparation of protein isolates is limited. In this investigation a protein isolate from soursop seeds (SSPI) was obtained by alkaline extraction and isoelectric precipitation methods. The SSPI was sonicated at 200, 400 and 600 W during 15 and 30 min and its effect on the physicochemical, functional, biochemical, and structural properties was evaluated. Ultrasound increased (p < 0.05) up to 5 % protein content, 261 % protein solubility, 60.7 % foaming capacity, 30.2 % foaming stability, 86 % emulsifying activity index, 4.1 % emulsifying stability index, 85.4 % in vitro protein digestibility, 423.4 % albumin content, 83 % total sulfhydryl content, 316 % free sulfhydryl content, 236 % α-helix, 46 % β-sheet, and 43 % β-turn of SSPI, in comparison with the control treatment without ultrasound. Furthermore, ultrasound decreased (p < 0.05) up to 50 % particle size, 37 % molecular flexibility, 68 % surface hydrophobicity, 41 % intrinsic florescence spectrum, and 60 % random coil content. Scanning electron microscopy analysis revealed smooth structures of the SSPI with molecular weights ranging from 12 kDa to 65 kDa. The increase of albumins content in the SSPI by ultrasound was highly correlated (r = 0.962; p < 0.01) with the protein solubility. Improving the physicochemical, functional, biochemical and structural properties of SSPI by ultrasound could contribute to its utilization as ingredient in food industry.

Effect of l-cysteine on functional properties and fibrous structure formation of 3D-printed meat analogs from plant-based proteins

The development of three-dimensional (3D) printed meat analogs with fiber, texture, and sensory resembling meat remains challenging. This study investigated the effect of l-cysteine on functionality enhancement and fibrous structure formation in mixtures of mung bean protein isolate (MBPI) and wheat gluten (WG) for meat analog production. 3D printing was used to construct fibrous filaments. Raw MBPI-WG mixtures decreased rheological properties when increasing l-cysteine contents (0.0%-0.6%), promoting ink extrudability. The cys-0.4% ink exhibited the highest printing resolution and structural stability, correlated with its higher mechanical strength and increased disulfide cross-links. After cooking, the cys-0.4% sample showed a pronounced fibrousness in agreement with its microstructure image. This meat analog displayed a muscle-meat-like structure, improved texture, and reduced beany odor and bitter taste. Excessive cysteine contents (0.5%-0.6%) negatively affected the functionality of meat analogs. This study provides guidance for optimizing the amount of l-cysteine in meat analogs to improve product quality.

Exploring the Role and Functionality of Ingredients in Plant-Based Meat Analogue Burgers: A Comprehensive Review

The development of plant-based meat analogues has become a significant challenge for the food industry in recent years due to the increasing demand for sustainable and healthier proteins in the context of a global protein transition. Plant-based meat analogues imitate the visual, textural, and chemical properties of traditional meat products and are required to closely resemble meat to appeal to consumers. In addition, consumers demand natural, clean-label, and nutritional, and healthy products. To address these challenges, the food industry must develop highly healthy, nutritious, and E-number-free meat analogue products. Understanding the functionality of each ingredient and its role in the food matrix is crucial to being a key player in the innovation of the meat analogue market. This review provides updated information on the primary ingredients utilized for the development of plant-based burger meat alternatives and their functionality. The key components of meat analogue burgers are outlined, including plant proteins, binding agents, fats and oils, flavorings, colorings, preservatives, fortificants, and clean-label considerations.

Physicochemical properties, anti-nutritional and bioactive constituents, in vitro digestibility, and techno-functional properties of bioprocessed whole wheat flour

This study investigated the impact of bioprocessing techniques (germination, solid-state fermentation, the combination of germination, and solid-state fermentation) on the physicochemical properties, anti-nutritional and bioactive constituents, in vitro digestibility, and techno-functional properties of whole wheat grains were investigated. Bioprocessed whole wheat flour (WWF) samples and the raw flour (control) were prepared using standard procedures. Proximate, anti-nutritional, mineral and amino acid (AA) compositions, protein digestibility, antioxidant activities, starch characteristics, and techno-functional properties were studied using standard methods. The bioprocessing methods increased (p ≤ 0.05) the protein (13.37-16.84 g/100 g), total dietary fiber, mineral constituents, resistant starch (7.19-9.87 g/100 g), slowly digestible starch, phenolic content, antioxidant activities (ferric reducing antioxidant power (FRAP) and 2,2-diphenyl-1-picrylhydrazyl radical scavenging activity), most AAs, and protein digestibility. Also observed were decreases (p ≤ 0.05) in rapidly digestible starch, phytic acid, tannin, and trypsin inhibitor activity. The adopted bioprocessing techniques modified the thermal, functional, color, and pasting properties of the WWF and resulted in molecular interactions in some functional groups, as revealed by Fourier transform infrared spectroscopy, compared to the raw flour. The combination of germination and fermentation improved the physicochemical (titratable acidity = 4.93%), protein (16.84/100 g) and starch digestibility (resistant starch = 9.87%), antioxidant (FRAP = 78.90 mg/GAE/100 g), and mineral contents (calcium = 195.28 mg/100 g), modified the pasting (peak viscosity = 90.34 RVU), thermal (peak temperature = 64.82°C), and color properties of WWF with reduced anti-nutritional factors. The combination of these processing techniques could serve as a natural and low-cost technique for the modification of whole wheat functionality and subsequently as an improved functional ingredient during food product development.

Mung bean protein as an emerging source of plant protein: a review on production methods, functional properties, modifications and its potential applications

Plant protein is rapidly becoming more of a prime interest to consumers for its nutritional and functional properties, as well as the potential to replace animal protein. In the frame of alternative protein new sources, mung bean is becoming another legume crop that could provide high quality plant protein after soybean and pea. In particular, the 8S globulins in mung bean protein have high structural similarity and homology with soybean β-conglycinin (7S globulin), with 68% sequence identity. Currently, mung bean protein has gained popularity in food industry because of its high nutritional value and peculiar functional properties. In that regard, various modification technologies have been applied to further broaden its application. Here, we provide a review of the composition, nutritional value, production methods, functional properties and modification technologies of mung bean protein. Furthermore, its potential applications in the new plant-based products, meat products, noodles, edible packaging films and bioactive compound carriers are highlighted to facilitate its utilization as an alternative plant protein, thus meeting consumer demands for high quality plant protein resources. © 2023 Society of Chemical Industry.

Identification of QTLs associated with seed protein concentration in two diverse recombinant inbred line populations of pea

Improving the seed protein concentration (SPC) of pea (Pisum sativum L.) has turned into an important breeding objective because of the consumer demand for plant-based protein and demand from protein fractionation industries. To support the marker-assisted selection (MAS) of SPC towards accelerated breeding of improved cultivars, we have explored two diverse recombinant inbred line (RIL) populations to identify the quantitative trait loci (QTLs) associated with SPC. The two RIL populations, MP 1918 × P0540-91 (PR-30) and Ballet × Cameor (PR-31), were derived from crosses between moderate SPC × high SPC accessions. A total of 166 and 159 RILs of PR-30 and PR-31, respectively, were genotyped using an Axiom® 90K SNP array and 13.2K SNP arrays, respectively. The RILs were phenotyped in replicated trials in two and three locations of Saskatchewan, Canada in 2020 and 2021, respectively, for agronomic assessment and SPC. Using composite interval mapping, we identified three QTLs associated with SPC in PR-30 and five QTLs in PR-31, with the LOD value ranging from 3.0 to 11.0. A majority of these QTLs were unique to these populations compared to the previously known QTLs for SPC. The QTL SPC-Ps-5.1 overlapped with the earlier reported SPC associated QTL PC-QTL-3. Three QTLs, SPC-Ps-4.2, SPC-Ps-5.1, and SPC-Ps-7.2 with LOD scores of 7.2, 7.9, and 11.3, and which explained 14.5%, 11.6%, and 11.3% of the phenotypic variance, respectively, can be used for marker-assisted breeding to increase SPC in peas. Eight QTLs associated with the grain yield were identified with LOD scores ranging from 3.1 to 8.2. Two sets of QTLs, SPC-Ps-2.1 and GY-Ps-2.1, and SPC-Ps-5.1 and GY-Ps-5.3, shared the QTL/peak regions. Each set of QTLs contributed to either SPC or grain yield depending on which parent the QTL region is derived from, thus confirming that breeding for SPC should take into consideration the effects on grain yield.

Natural polysaccharides and proteins-based films for potential food packaging and mulch applications: A review

Conventional nondegradable packaging and mulch films, after reaching the end of their use, become a major source of waste and are primarily disposed of in landfills. Accumulation of non-degradable film residues in the soil leads to diminished soil fertility, reduced crop yield, and can potentially affect humans. Application of degradable films is still limited due to the high cost, poor mechanical, and gas barrier properties of current biobased synthetic polymers. In this respect, natural polysaccharides and proteins can offer potential solutions. Having versatile functional groups, three-dimensional network structures, biodegradability, ease of processing, and the potential for surface modifications make polysaccharides and proteins excellent candidates for quality films. Besides, their low-cost availability as industrial waste/byproducts makes them cost-effective alternatives. This review paper covers the performance properties, cost assessment, and in-depth analysis of macromolecular structures of some natural polysaccharides and proteins-based films that have great potential for packaging and mulch applications. Proper dissolution of biopolymers to improve molecular interactions and entanglement, and establishment of crosslinkages to form an ordered and cohesive polymeric structure can help to obtain films with good properties. Simple aqueous-based film formulation techniques and utilization of waste/byproducts can stimulate the adoption of affordable biobased films on a large-scale.

Rapid Acidification and Off-Flavor Reduction of Pea Protein by Fermentation with Lactic Acid Bacteria and Yeasts

Pea protein is widely used as an alternative protein source in plant-based products. In the current study, we fermented pea protein to reduce off-flavor compounds, such as hexanal, and to produce a suitable fermentate for further processing. Laboratory fermentations using 5% (w/v) pea protein suspension were carried out using four selected lactic acid bacteria (LAB) strains, investigating their growth and acidification capabilities in pea protein. Rapid acidification of pea protein was achieved with Lactococcus lactis subsp. lactis strain LTH 7123. Next, this strain was co-inoculated together with either the yeasts Kluyveromyces lactis LTH 7165, Yarrowia lipolytica LTH 6056, or Kluyveromyces marxianus LTH 6039. Fermentation products of the mixed starter cultures and of the single strains were further analyzed by gas chromatography coupled with mass spectrometry to quantify selected volatile flavor compounds. Fermentation with L. lactis LTH 7123 led to an increase in compounds associated with the "beany" off-flavors of peas, including hexanal. However, significant reduction in those compounds was achieved after fermentation with Y. lipolytica LTH 6056 with or without L. lactis LTH 7123. Thus, fermentation using co-cultures of LAB and yeasts strains could prove to be a valuable method for enhancing quality attributes of pea protein-based products.

Electrical Fields in the Processing of Protein-Based Foods

Electric field-based technologies offer interesting perspectives which include controlled heat dissipation (via the ohmic heating effect) and the influence of electrical variables (e.g., electroporation). These factors collectively provide an opportunity to modify the functional and technological properties of numerous food proteins, including ones from emergent plant- and microbial-based sources. Currently, numerous scientific studies are underway, contributing to the emerging body of knowledge about the effects on protein properties. In this review, "Electric Field Processing" acknowledges the broader range of technologies that fall under the umbrella of using the direct passage of electrical current in food material, giving particular focus to the ones that are industrially implemented. The structural and biological effects of electric field processing (thermal and non-thermal) on protein fractions from various sources will be addressed. For a more comprehensive contextualization of the significance of these effects, both conventional and alternative protein sources, along with their respective ingredients, will be introduced initially.

Effect of a novel drying method based on supercritical carbon dioxide on the physicochemical properties of sorghum proteins

The aim of this research was to use supercritical carbon dioxide (SC-CO2) drying as a novel approach for generating sorghum protein concentrates/isolates with enhanced functional properties. Sorghum protein extracts were obtained from white whole-grain sorghum flour and were dried by two methods, namely, freeze-drying and SC-CO2 drying. The collected proteins were characterized for their morphology, color, crystallinity, surface hydrophobicity, emulsifying activity index (EAI), creaming index (CI), foaming capacity (FC), foaming stability (FS), protein solubility, chemical interactions, and viscosity. The SC-CO2-dried proteins exhibited higher porosity compared to the freeze-dried ones with smaller particle sizes (∼5.1 vs. 0.4 μm, respectively). The XRD patterns indicated that the SC-CO2-dried proteins had a lower crystallinity than the freeze-dried proteins. However, the surface hydrophobicities of the freeze-dried and SC-CO2-dried proteins were similar. The EAI results showed that the emulsifying activity of freeze-dried protein powder (40.6) was better than that of SC-CO2-dried protein powder (29.8). Nevertheless, the solubility of SC-CO2-dried proteins was higher than that of freeze-dried proteins in most of the pHs investigated. Overall, the proposed SC-CO2 drying method has the potential to generate porous protein powders with improved solubility that can be used in developing functional foods.

Plant protein solubility: A challenge or insurmountable obstacle

Currently, there is an increasing focus on comprehending the solubility of plant-based proteins, driven by the rising demand for animal-free food formulations. The solubility of proteins plays a crucial role in impacting other functional properties of proteins and food processing. Consequently, understanding protein solubility in a deeper sense may allow a better usage of plant proteins. Herein, we discussed the definition of protein solubility from both thermodynamic and colloidal perspectives. A range of factors affecting solubility of plant proteins are generalized, including intrinsic factors (amino acids composition, hydrophobicity), and extrinsic factors (pH, ionic strength, extraction and drying methods). Current methods to enhance solubility are outlined, including microwave, high intensity ultrasound, hydrostatic pressure, glycation, pH-shifting, enzymatic hydrolysis, enzymatic cross-linking, complexation and modulation of amino acids. We base the discussion on diverse modified methods of nitrogen solubility index available to determine and analyze protein solubility followed by addressing how other indigenous components affect the solubility of plant proteins. Some nonproteinaceous constituents in proteins such as carbohydrates and polyphenols may exert positive or negative impact on protein solubility. Appropriate protein extraction and modification methods that meet consumer and manufacturers requirements concerning nutritious and eco-friendly foods with lower cost should be investigated and further explored.

Different source of commercial soy protein isolates: Structural, compositional, and physicochemical characteristics in relation to protein functionalities

This study aimed to illustrate the relationship among physicochemical properties, subunit composition and protein functionalities in a broad collection of commercial soy protein isolates (SPIs) from China and the EU. The results indicated that SPIs had large variations in glycinin/β-conglycinin composition, protein denaturation, and water- and oil-binding capacity (WBC and OBC) and solubility. These SPIs could be roughly divided into pre-denatured SPI, partially hydrolyzed SPI, and less modified SPI. The pre-denatured SPI with high surface hydrophobicity and large particle sizes showed reduced WBC and OBC due to increased protein aggregation, and partially hydrolyzed SPI showed high protein solubility owing to the exposure of hydrophilic regions and reduction in molecular size. The processing-induced physicochemical changes played a pivotal role in determining protein functionalities, whereas subunit composition affected protein functionality less. Overall, this study highlighted the obvious difference in raw material quality of commercial SPI, and provided promising methods for SPI categorization.

What Technological and Economic Elements Must be Addressed to Support the Affordability, Accessibility, and Desirability of Alternative Proteins in LMIC?

Populations in low- and middle-income countries (LMIC) typically consume less than the recommended daily amount of protein. Alternative protein (AP) sources could help combat malnutrition, but this requires careful consideration of elements needed to further establish AP products in LMIC. Key considerations include technological, nutritional, safety, social, and economic challenges. This perspective analyzes these considerations in achieving dietary diversity in LMIC, using a combination of traditional and novel protein sources with high nutritional value, namely, soy, mycoprotein, and cultivated meat. Technological approaches to modulate the technofunctionality and bitter off-tastes of plant-sourced proteins facilitate processing and ensure consumer acceptance. Economic considerations for inputs, infrastructure for production, and transportation represent key elements to scale up AP. Dietary diversification is indispensable and LMIC cannot rely on plant proteins alone to provide adequate protein intake sustainably. Investments in infrastructure and innovation are urgently needed to offer diverse sources of protein in LMIC.

Comparative structural, digestion and absorption characterization of three common extruded plant proteins

Extruded plant proteins, also known as textured vegetable proteins (TVPs), serve as vital components in plant-based meat analogue, yet their structural and nutritional characteristics remain elusive. In this study, we examined the impact of high-moisture (HM) and low-moisture (LM) extrusion on the structures, digestion and absorption of three types of plant proteins. Extrusion transformed plant proteins from spherical to fibrous forms, and formed larger aggregate particles. It also led to the disruption of original disulfide bonds and hydrophobic interactions within protein molecules, and the formation of new cross-links. Intriguingly, compared to native plant proteins, TVPs' α-helix/β-sheet values decreased from 0.68 to 0.69 to 0.56-0.65. Extrusion increased the proportion of peptides shorter than 1 kD in digesta of TVPs by 1.44-23.63%. In comparison to unextruded plant proteins, TVPs exhibited lower content of free amino acids in cell transport products. Our findings demonstrated that extrusion can modify protein secondary structure by diminishing the α-helix/β-sheet value, and impact protein tertiary structure by reducing disulfide bonds and hydrophobic interactions, promoting the digestion and absorption of plant proteins. These insights offer valuable scientific backing for the utilization of extruded plant-based proteins, bolstering their role in enhancing the palatability and nutritional profile of plant-based meat substitutes.

Changes in the structure and functional properties of soybean isolate protein: Effects of different modification methods

Soybean protein isolate (SPI) is an important plant protein in food processing; however, its spherical structure prevents the exposure of its hydrophobic residues and affects its functional properties. In this study, we elucidate the effects of deamidation, phosphorylation, and glycosylation on the structure (Fourier-transform infrared spectroscopy, circular dichroism, fluorescence, and scanning electron microscopy) and functional properties (solubility, emulsifying activity index (EAI), and emulsifying stability index (ESI)) of SPI. The zeta potentials of the deamidated, phosphorylated, and glycosylated (DSPI, PSPI, and MSPI, respectively) samples decreased significantly (p < 0.05) relative to those of SPI. The functional properties of the modified SPI samples were improved, with MSPI-2 showing the best solubility (86.73 ± 0.34%), EAI (118.89 ± 0.73 m2/g), and ESI (273.33 ± 0.59 min). Moreover, the effects of the three modifications on the SPI functional properties increase in the order MSPI > PSPI > DSPI. These results provide a theoretical understanding the relationship between the modifications and SPI structure.

Structural modification of oat protein by thermosonication combined with high pressure for O/W emulsion and model salad dressing production

Oat protein is becoming an important ingredient in beverages and formulated foods owing to its high nutritive value and bland flavor; yet, its functionality remains largely unexplored. This study sought to enhance the surface activity of oat protein isolate (OPI) through high-intensity ultrasound (HIU; at 20 or 60 °C) combined with high pressure homogenization (HP; 30 MPa) treatments. Sonication disturbed the protein conformation and significantly improved surface hydrophobicity (19.7%) and ζ-potential (15.7%), which were further augmented by subsequent HP (P < 0.05). Confocal microscopy revealed a uniform oil droplet distribution in emulsions prepared with HIU+HP combination treated OPI, and the oil droplet size decreased up to 35.6% when compared to that of non-treated OPI emulsion (d = 1718 nm). Emulsifying activity was greater for HIU+HP than for HIU, and the viscosity followed a similar trend. Moreover, while emulsions prepared with HIU or HP treated OPI were more stable than control, the 60 °C HIU+HP combination treatment yielded the maximum stability. In corroboration, a model salad dressing prepared from HIU+HP treated OPI displayed a homogenous oil droplet distribution and an improved viscosity. Therefore, thermosonication combined with high pressure homogenization may be suitable for salad dressings and other oil-imbedded food products.

Triple-Emulsion-Based Antibubbles: A Step Forward in Fabricating Novel Multi-Drug Delivery Systems

Developing carriers capable of efficiently transporting both hydrophilic and lipophilic payloads is a captivating focus within the pharmaceutical and drug delivery research domain. Antibubbles, constituting an innovative encapsulation system designed for drug delivery purposes, have garnered scientific interest thanks to their distinctive water-in-air-in-water (W1/A/W2) structure. However, in contrast to their precursor, i.e., nanoparticle-stabilized W1/O/W2 double emulsion, traditional antibubbles lack the ability to accommodate a lipophilic payload, as the intermediary (volatile) oil layer of the emulsion is replaced by air during the antibubble fabrication process. Therefore, here, we report the fabrication of triple-emulsion-based antibubbles (O1/W1/A/W2), in which the inner aqueous phase was loaded with a nanoemulsion stabilized by various proteins, including whey, soy, or pea protein isolates. As model drugs, we employed the dyes Nile red in the oil phase and methylene blue in the aqueous phase. The produced antibubbles were characterized regarding their size distribution, entrapment efficiency, and stability. The produced antibubbles demonstrated substantial entrapment efficiencies for both lipophilic (ranging from 80% to 90%) and hydrophilic (ranging from 70% to 82%) components while also exhibiting an appreciable degree of stability during an extended rehydration period of two weeks. The observed variations among different antibubble variants were primarily attributed to differences in protein concentration rather than the type of protein used.

Improvement of foaming properties of ovalbumin: Insights into the synergistic effect of preheating and high-intensity ultrasound on physicochemical properties and structure analysis

Ovalbumin (OVA), characterized by its high concentration in eggs, possesses remarkable foaming properties. Nevertheless, OVA is highly sensitive to thermal changes and acid-base conditions, substantially hampering its application potential for foaming purposes within the food industry. This experiment aimed to examine the effects of preheating and high-intensity ultrasound (HIU) treatment at different powers on OVA foaming properties and explore the underlying mechanisms. The results revealed that OVA exhibited the highest foaming capacity (31.5 %) and foaming stability (96.7 %) under the treatment condition of 200w + 60°C. Additionally, significant improvements were observed in the content of free sulfhydryl groups (37.27 μmg/g), solution viscosity (142.33 mPa·s), and surface hydrophobicity (37.27 μg BPB) under this condition. The absolute value of the zeta potential (-10.28 mV) was significantly increased in the 200w + 60°C treatment group. Moreover, the polymer dispersity index of OVA (0.6045) was significantly reduced, resulting in improved dispersion than the control group. The structural analysis revealed significant changes in the α-helix and β-sheet content of OVA after treatment at 200w + 60 °C. The X-ray diffraction pattern exhibited sharper peaks, indicating a crystal structure, and the fluorescence peak displayed a slight blue shift along with increased hydrophobicity. Moreover, the preheating and HIU treatment induced a continuous uneven and irregular pore structure in OVA, which ultimately enhanced its foaming properties. In conclusion, the preheating and HIU treatment offers a novel approach to enhance the foaming properties of OVA.

Influence of atmospheric pressure plasma jet on the structural, functional and digestive properties of chickpea protein isolate

Chickpea protein (CPI) is a promising dietary protein and potential substitute for soy protein in food product development due to its high protein content and low allergenicity. However, CPI possesses denser tertiary and quaternary structures and contains certain amount of anti-nutritional factors, both of which constrain its functional properties and digestibility. The objective of this study was to assess the effectiveness of atmospheric pressure plasma jets (APPJ) as a non-thermal method for enhancing the functional characteristics and digestibility of CPI. In this study, the reactive oxygen and nitrogen species generated by the APPJ treatment led to protein oxidation and increased carbonyl and di-tyrosine contents. At the same time, the secondary, tertiary and microstructural structures of CPI were changed. The solubility, water holding capacity, fat absorption capacity, emulsifying capacity and foaming capacity of CPI were significantly improved after 30 s APPJ treatment, and a higher storage modulus in rheology was observed. Additionally, it was observed that the in vitro protein digestibility (IVPD) of APPJ-treated CPI increased significantly from 44.85 ± 0.6 % to 50.2 ± 0.59 % following in vitro simulated gastric and intestinal digestion, marking a noteworthy improvement of 11.93 %. These findings indicate that APPJ processing can enhance the functional and digestive properties of CPI through structural modification and expand its potential applications within the food industry.

Plant-Based Meat Proteins: Processing, Nutrition Composition, and Future Prospects

The growing need for plant-based meat alternatives promotes the rapid progress of the food industry. Processing methods employed in plant-based meat production are critical to preserving and enhancing their nutritional content and health benefits, directly impacting consumer acceptance. Unlike animal-based food processing, the efficiency of protein extraction and processing methods plays a crucial role in preserving and enriching the nutritional content and properties. To better understand the factors and mechanisms affecting nutrient composition during plant-based meat processing and identify key processing steps and control points, this work describes methods for extracting proteins from plants and processing techniques for plant-based products. We investigate the role of nutrients and changes in the nutrients during plant protein product processing. This article discusses current challenges and prospects.

Immobilization of Horseradish Peroxidase on Ca Alginate-Starch Hybrid Support: Biocatalytic Properties and Application in Biodegradation of Phenol Red Dye

In this study, horseradish peroxidase was extracted, purified, and immobilized on a calcium alginate-starch hybrid support by covalent bonding and entrapment. The immobilized HRP was used for the biodegradation of phenol red dye. A 3.74-fold purification was observed after precipitation with ammonium sulfate and dialysis. An immobilization yield of 88.33%, efficiency of 56.89%, and activity recovery of 50.26% were found. The optimum pH and temperature values for immobilized and free HRP were 5.0 and 50 °C and 6.5 and 60 °C, respectively. The immobilized HRP showed better thermal stability than its free form, resulting in a considerable increase in half-life time (t1/2) and deactivation energy (Ed). The immobilized HRP maintained 93.71% of its initial activity after 45 days of storage at 4 °C. Regarding the biodegradation of phenol red, immobilized HRP resulted in 63.57% degradation after 90 min. After 10 cycles of reuse, the immobilized HRP was able to maintain 43.06% of its initial biodegradative capacity and 42.36% of its enzymatic activity. At the end of 15 application cycles, a biodegradation rate of 8.34% was observed. In conclusion, the results demonstrate that the immobilized HRP is a promising option for use as an industrial biocatalyst in various biotechnological applications.

A review of alternative proteins for vegan diets: Sources, physico-chemical properties, nutritional equivalency, and consumer acceptance

Alternate proteins are gaining popularity as a more sustainable and environmentally friendly alternative to animal-based proteins. These proteins are often considered healthier and are suitable for people following a vegetarian or vegan diet. Alternative proteins can be recovered from natural sources like legumes, grains, nuts, and seeds, while single cell proteins (mycoproteins), and algal proteins are being developed using cutting-edge technology to grow fungus, yeast and algal cells in a controlled environment, creating a more sustainable source of protein. Although, the demand for alternative protein products is increasing, there still happens to be a large gap in use among the general consumers mainly stemming from its lower bioavailability, lack of nutritional equivalency and reduced digestibility compared to animal proteins. The focus of the review is to emphasize on various sources and technologies for recovering alternative proteins for vegan diets. The review discusses physicochemical properties of alternative proteins and emphasise on the role of various processing technologies that can change the digestibility and bioavailability of these proteins. It further accentuates the nutritional equivalency and environmental sustainability of alternative protein against the conventional proteins from animals. The food laws surrounding alternative proteins as well as the commercial potential and consumer acceptance of alternative protein products are also highlighted. Finally, key challenges to improve the consumer acceptability and market value of plant-based proteins would be in achieving nutrient equivalency and enhance bioavailability and digestibility while maintaining the same physicochemical properties, taste, texture, as animal proteins, has also been highlighted.

Effect of heat treatment on protein quality of rapeseed protein isolate compared with non-heated rapeseed isolate, soy and whey protein isolates, and rice and pea protein concentrates

BACKGROUND

Rapeseed protein isolate is used in the food industry, and heating is often used during rapeseed processing. However, the digestible indispensable amino acid score (DIAAS) for heat-treated rapeseed protein isolate is unknown. The present study aimed to test the hypothesis that heating rapeseed protein isolate improves protein quality resulting in DIAAS that is greater than for pea and rice protein concentrates, and comparable to that of soy and whey protein isolates.

RESULTS

Standardized ileal digestibility (SID) of amino acids (AA), except leucine and methionine, was not different between heat-treated rapeseed protein isolate and soy protein isolate, but SID of most AA was greater (P < 0.001) for heat-treated rapeseed protein isolate than for brown rice protein concentrate, pea protein concentrate, rapeseed protein isolate and soy protein isolate, but not whey protein isolate. Non-heated rapeseed protein isolate had a reduced (P < 0.001) DIAAS for 6-month-old to 3-year-old children compared with soy protein isolate, but this was greater (P < 0.001) than for pea and brown rice protein concentrates. The DIAAS for heat-treated rapeseed protein isolate was greater (P < 0.001) than for non-heated rapeseed protein isolate for all age groups. Heat-treated rapeseed protein isolate and whey protein isolate had a DIAAS > 100 for individuals older than 3 years.

CONCLUSION

Rapeseed protein isolate had a DIAAS comparable to soy protein isolate, but heat-treated rapeseed protein isolate and whey protein isolate had DIAAS ≥ 100, qualifying these proteins as 'excellent'. Rice and pea protein concentrates had DIAAS < 75. © 2023 Society of Chemical Industry.

The influence of ionic polysaccharides on the physicochemical and techno-functional properties of soy proteins; a comprehensive review

Since the world's population has surged in recent decades, the need for sustainable as well as environmentally friendly protein sources is growing. However, there are daunting challenges in utilizing these protein sources in the food industry due to their poor techno-functional properties compared with animal proteins. Numerous procedures have been introduced to improve plant protein functionalities with related pros and cons. Among them, complexation with polysaccharides is considered a safe and effective process for modulating plant proteins' technological and industrial applications. Notwithstanding the nutritional value of soy protein (SP) as a "complete protein," it is a crucial protein commercially because of its rank as the highest-traded plant-based protein worldwide. The current review deals with SP complexation with ionic polysaccharides, including chitosan, alginate, carrageenan, and xanthan gum, and their effects on the physicochemical and techno-functional properties of SP. Accordingly, the structure of SP and the abovementioned polysaccharides have been considered for a better understanding of the possible interactions. Then, the changes in the physicochemical and functional properties of SP and their potential applications in the formulation of plant-based food products have been discussed. Overall, ionic polysaccharides at optimum conditions would improve the functional properties of SP by altering its secondary structure, making it suitable for a wide range of applications in the food industry.

Effect of Physical Modifications on Physicochemical and Functional Properties of Walnut Protein

Walnut protein is a high-quality vegetable protein with promising applications in the food industry; however, its potential is hindered by low solubility and associated properties. We utilized various physical modification techniques (cold plasma; ball milling; superfine grinding; ultrasound; wet ball milling; and high-pressure microjet) to enhance walnut proteins' physicochemical and functional properties. The changes in particle size, microstructure, surface hydrophobicity, fluorescence, solubility, foaming, and emulsification were investigated. Cold plasma and ultrasound treatments minimally affected particle size and morphology. Cold plasma increased the particle size D4,3 from 145.20 μm to 152.50 μm. Ultrasonication reduced the particle size D4,3 to 138.00 μm. The variation was within ±10 μm, while the particle size of walnut protein significantly decreased after the other four modification treatments. The greatest variation in particle size was in the superfine grinding, with the D4,3 being reduced to 23.80 μm. Ultrasound treatment converted the β-sheet into an α-helix, while the other methods transformed the α-helix into a β-sheet. The dispersion stability notably improved after wet ball milling and high-pressure microjet treatments, which was accompanied by a significant increase in solubility from 6.9% (control) to 13.6% (wet ball milling) and 31.7% (high-pressure microjet). The foaming and emulsification properties were also enhanced through these modifications (foaming improved from 47% to 55.33% and emulsification improved from 4.32 m2/g to 8.27 m2/g). High-pressure microjet treatment proved most effective at improving solubility in the functional properties of walnut protein. These findings are expected to help broaden the potential utilization of walnut protein in the food industry, including in beverages and emulsions.

Efficacy of cold plasma technology on the constituents of plant-based food products: Principles, current applications, and future potentials

Cold plasma (CP) is one of the novel non-thermal food processing technologies, which has the potential to extend the shelf-life of plant-based food products without adversely affecting the nutritional value and sensory characteristics. Besides microbial inactivation, this technology has been explored for food functionality, pesticide control, and allergen removals. Cold plasma technology presents positive results in applications related to food processing at a laboratory scale. This review discusses applications of CP technology and its effect on the constituents of plant-based food products including proteins, lipids, carbohydrates, and polar and non-polar secondary plant metabolites. As proven by the publications in the food field, the influence of CP on the food constituents and sensory quality of various food materials are mainly based on CP-related factors such as processing time, voltage level, power, frequency, type of gas, gas flow rate as well as the amount of sample, type, and content of food constituents. In addition to these, changes in the secondary plant metabolites depend on the action of CP on both cell membrane breakdown and increase/decrease in the scavenging compounds. This technology offers a good alternative to conventional methods by inactivating enzymes and increasing antioxidant levels. With a waterless and chemical-free property, this sustainable and energy-efficient technology presents several advantages in food applications. However, scaling up CP by ensuring uniform plasma treatment is a major challenge. Further investigation is required to provide information regarding the toxicity of plasma-treated food products.

Performance of rice protein hydrolysates as a stabilizing agent on oil-in-water emulsions

Rice protein isolate (RPI) has been receiving increasing attention from the food industry due to its performance as an emulsifier. However, it is possible to enlarge its field of applications through enzymatic hydrolysis. Therefore, this work aimed to investigate the effects of the controlled enzymatic hydrolysis (degree of hydrolysis DH as 2, 6, and 10%) using Flavourzyme on the physicochemical properties of rice protein and to identify the minimum concentration of these hydrolysates (0.5, 1.0, and 1.5%) to form and stabilize oil/water emulsion. The physicochemical, interfacial tension (IT), and surface characteristics of RPI and their hydrolysates (RPH) were determined. Even at a lower protein concentration (1.0%), protein hydrolysate presented lower IT when compared with RPI at a higher protein concentration (1.5%). The interfacial tension decreased from 17.6 mN/m to 9.9 mN/m when RPI was hydrolyzed. Moreover, enzymatic hydrolysis (DH 6 and 10%) enhanced the protein solubility by almost 20% over a pH range of 3-11. The improved amphiphilic property of RPH, supported by the results of IT and solubility, was confirmed by the higher emulsion stability indicated by the Turbiscan and emulsion stability indexes. Emulsions stabilized by RPH (DH 6% and 10%) at lower protein concentrations (1%) exhibited better physical stability than RPI at higher protein concentrations (1.5%). In this work, we verified the minimum concentration of rice protein hydrolysate required to form and stabilize oil-in-water (O/W) emulsions.

Recent Advances in Acoustic Technology in Food Processing

The development of food industry technologies and increasing the sustainability and effectiveness of processing comprise some of the relevant objectives of EU policy. Furthermore, advances in the development of innovative non-thermal technologies can meet consumers' demand for high-quality, safe, nutritious, and minimally processed foods. Acoustic technology is characterized as environmentally friendly and is considered an alternative method due to its sustainability and economic efficiency. This technology provides advantages such as the intensification of processes, increasing the efficiency of processes and eliminating inefficient ones, improving product quality, maintaining the product's texture, organoleptic properties, and nutritional value, and ensuring the microbiological safety of the product. This review summarizes some important applications of acoustic technology in food processing, from monitoring the safety of raw materials and products, intensifying bioprocesses, increasing the effectiveness of the extraction of valuable food components, modifying food polymers' texture and technological properties, to developing biodegradable biopolymer-based composites and materials for food packaging, along with the advantages and challenges of this technology.

Influence of High-Intensity Ultrasound on Characteristics and Bioaccessibility of Pea Protein in Fiber-Enriched Suspensions

Pea protein is of high interest for the food industry owing to its low allergenicity and high nutritional value. However, it often exhibits poor functionality, such as low solubility. The presence of dietary fiber in food products is beneficial for human health but may decrease the bioaccessibility of nutrients. Ultrasound, as a promising green technology, may influence properties of fibers and proteins and, thus, bioaccessibility. Therefore, this study investigated the effects of high-intensity ultrasound on the characteristics and protein bioaccessibility of protein-fiber suspensions. Suspensions containing different fiber compounds (1 wt.%) and pea protein (5 wt.%) were homogenized using high-intensity ultrasound (amplitude 116 µm, t = 150 s, energy density = 225 kJ/L, P¯ = 325 W). Owing to sonication-induced cavitation, the dispersibility of the protein was enhanced, and the viscosity of solutions containing citrus or apple fiber was increased. FE-SEM revealed the formation of different fiber-protein networks during sonication. Even if viscosity is known to have an impact on the bioaccessibility of nutrients, no restrictions on the digestibility of protein were detected during an in vitro digestion. Thus, protein uptake is probably not affected, and ultrasound can be used to modify the technofunctionality of fibers and proteins without any nutritional disadvantages.

Sustainable Isolation of Bioactive Compounds and Proteins from Plant-Based Food (and Byproducts)

Plant-based food produces significantly less greenhouse gases, and due to its wealth of bioactive components and/or plant-based protein, it becomes an alternative in a sustainable food system. However, the processing and production of products from plant sources creates byproducts, which can be waste or a source of useful substances that can be reused. The waste produced during the production and processing of food is essentially nutrient- and energy-rich, and it is recognized as an excellent source of secondary raw materials that could be repurposed in the process of manufacturing and preparing food, or as feed for livestock. This review offers an overview of the sources and techniques of the sustainable isolation of bioactive substances and proteins from various sources that might represent waste in the preparation or production of food of plant origin. The aim is to uncover novel approaches to use waste and byproducts from the process of making food to provide this waste food an additional benefit, not forgetting the expectations of the end user, the consumer. For the successful isolation of bioactive ingredients and proteins from food of plant origin, it is crucial to develop more eco-friendly and efficient extraction techniques with a low CO2 footprint while considering the economic aspects.