Bionanotechnology. Colloidal nanoparticles as advanced biological sensors

Local triple-combination therapy results in tumour regression and prevents recurrence in a colon cancer model

Conventional cancer therapies involve the systemic delivery of anticancer agents that neither discriminate between cancer and normal cells nor eliminate the risk of cancer recurrence. Here, we demonstrate that the combination of gene, drug and phototherapy delivered through a prophylactic hydrogel patch leads, in a colon cancer mouse model, to complete tumour remission when applied to non-resected tumours and to the absence of tumour recurrence when applied following tumour resection. The adhesive hydrogel patch enhanced the stability and provided local delivery of embedded nanoparticles. Spherical gold nanoparticles were used as a first wave of treatment to deliver siRNAs against Kras, a key oncogene driver, and rod-shaped gold nanoparticles mediated the conversion of near-infrared radiation into heat, causing the release of a chemotherapeutic as well as thermally induced cell damage. This local, triple-combination therapy can be adapted to other cancer cell types and to molecular targets associated with disease progression.

Effect of Molecular Structure on Stability of Organic Nanoparticles Formed by Bodipy Dimers

The objective was to evaluate the stability of organic nanoparticles made from Bodipy dimers. Bodipy dimers with different length of linkers were synthesized via multicomponent Passerini reaction, and could form the fluorescent nanoparticles (FNPs) through nanoprecipitation. Bodipy-dimers FNPs with long chain linker indicated better stability in biological condition than those with short one as revealed by changes of diameter and size distribution. The FNPs possessed high physical homogeneity and low cytotoxicity. The molecular structure dependent stability was also validated by confocal laser scanning microscope based on the dissociation-induced fluorescence recovering. Importantly, stable FNPs also could be used to load hydrophobic cargoes and deliver them into cytoplasm. We believe this systematic study between structure and stability might open new opportunities for designing stable nanoparticles for various applications.

Molybdenum and Tungsten Sulfide Ligands for Versatile Functionalization of All-Inorganic Nanocrystals

We report a strategy toward the synthesis of colloidal nanocrystals capped with inorganic molybdenum and tungsten sulfide ligands. MoS4(2-) and WS4(2-) thiometalates were utilized to replace organic ligands capping a wide range of nanocrystals such as metals, semiconductors, and well-conserved primary properties of nanocrystals in polar media. Especially, MoS4(2-)- and WS4(2-)-capped CdSe nanocryatals showed the dramatic enhancement of photoluminescence properties by the photo-oxidation treatment, which originated from the preferential formation of MoSxOy layers on the CdSe surface. The highest quantum yield reached up to 51%. Furthermore, we studied the charge-transport properties of MoS4(2-)-capped PbS nanocryatals by the fabrication of a field-effect transistor and photodetectors. Finally, MoS4(2-)- and WS4(2-)-capped nanocrystals were used for the production of two-dimensional MoS2 and WS2 thin layers on nanostructures by heat treatment. Such versatility of these thiometalate ligands offers an additional degree of control over the functionality of nanocrystals for optoelectronic and catalytic applications.

Biomaterials for Abrogating Metastasis: Bridging the Gap between Basic and Translational Research

Herein lies the issue of how to best approach cancer metastasis therapeutics in a focused, directed and efficacious manner. The lack of standardized means to efficiently deliver therapeutic cargo to metastatic sites calls for a paradigm shift in the way we view and treat metastasis. It is crucial to leverage the potential of nanomedicine to differentially combat cancer spread at each stage of the disease (primary tumor growth and formation of metastases) while considering the optimal administration route. We propose to implement three possible strategies to treat cancer as a function of disease type and state, while leveraging the advancement in materials design and in particular nanotechnology: (1) local primary tumor abrogation; (2) primary tumor re-programming to prevent metastasis; and (3) combination (local and systemic) therapy when metastasis has already transpired. Herein, we highlight potential means to bridge the gap between basic and translational research as related to metastasis therapy.

Massively Screening the Temporal Spectra of Single Nanoparticles to Uncover the Mechanism of Nanosynthesis

Nanosynthesis is the basis of nanotechnology and its applications. It is necessary to understand the growth mechanism of nanoparticles and the functions of growth factors. An effective way to study the synthesis is at the single nanoparticle level. This study reports a single nanoparticle spectrometer, which is based on a commercial dark-field microscopy and a group of narrowband filters. This spectrometer has many advantages, such as high light transparency (35%-75%), low cost (<$1500), massive screening (≈200 nanoplates at a time), and a high time resolution (<5 s). By using this spectrometer, the galvanic replacement reaction (GRR) is studied on single Ag nanoplates in situ and in real time. The research reveals that GRR on single Ag nanoplates has three different types according to the change of peak wavelength during reaction. Such diverse reaction types can be attributed to the different relative reaction rates of GRR on the faces and edges of Ag nanoplate with different facets. Further research shows that the relative reaction rates of different facets vary a lot under different concentrations of tri-sodium citrate. This research successfully demonstrates that the new single nanoparticle spectrometer can study the growth of single nanoparticles and the effect of growth factors.

Impact of fluorescent silicon nanoparticles on circulating hemolymph and hematopoiesis in an invertebrate model organism

Silicon nanoparticles (SiNPs) have attractive potential applications in biological and medical fields, and yet their impact on animals is still controversial, and there have been no reports of their effects on hematopoiesis. In this study, the effects of SiNPs on hemocytes and hematopoiesis were investigated by administering SiNPs via a vascular injection into an invertebrate model, the silkworm. Our results show that the ability of SiNPs to enter different types of circulating hemocytes and their impact on those hemocytes differed significantly. Rapid accumulation of SiNPs was observed in granulocytes, oenocytoids, and spherulocytes, which have immune functions in the circulating hemolymph, whereas SiNPs did not easily enter prohemocytes, which can differentiate into granulocytes, oenocytoids, and spherulocytes and replenish them. The SiNPs that entered the hemocytes initiated autophagy and apoptosis via the lysosomal/mitochondrial pathway. High-dose SiNPs weakly stimulated lysosomal activity in hematopoietic organs, but did not lead to a significant increase in reactive oxygen species or severe autophagy or apoptosis in the organ tissues. We suggest that the damage caused by high-dose SiNPs to hematopoiesis is self-healing, because few SiNPs entered the hematopoietic stem cells in the circulating hemolymph, so the damage to the hematopoietic tissues was limited.

Fluorescent and Photostable Silicon Nanoparticles Sensors for Real-Time and Long-Term Intracellular pH Measurement in Live Cells

Fluorescent sensors suitable for dynamic measurement of intracellular pH (pHi) fluctuations should feature the following properties: feeble cytotoxicity, wide-pH range response, and strong fluorescence coupled with good photostability, which are still remaining scanty to date. Herein, by functionalizing fluorescent silicon nanoparticles (SiNPs) with pH-sensitive dopamine (DA) and pH-insensitive rhodamine B isothiocyanate (RBITC), we present the first demonstration of fluorescent SiNPs-based sensors, simultaneously exhibiting minimal toxicity (cell viability of treated cells remains above 95% during 24-h treatment), sensitive fluorescent response to a broad pH range (∼4-10), and bright fluorescence coupled with robust photostability (∼9% loss of fluorescence intensity after 40 min continuous excitation; in contrast, fluorescence of Lyso-tracker is rapidly quenched in 5 min under the same experiment conditions). Taking advantage of these merits, we further employ the resultant fluorescent SiNPs sensors for the detection of lysosomal pH change mediated by nigericin in live HeLa and MCF-7 cells in long-term (e.g., 30 min) manners. Interestingly, two consecutive stages, i.e., alkalization lag phase and logarithmic growth phase, are observed based on recording the whole process of pH change, offering important information for understanding the dynamic process of pHi fluctuations.

Multifunctional and High Affinity Polymer Ligand that Provides Bio-Orthogonal Coating of Quantum Dots

We detail the design of hydrophilic metal-coordinating ligands and their use for the effective coating of luminescent quantum dots (QDs). The ligand design exploits the specific, reagent-free nucleophilic addition reaction of amine-modified molecules toward maleic anhydride to introduce several lipoic acid metal anchors, hydrophilic zwitterion moieties, and specific reactive groups along a poly(isobutylene-alt-maleic anhydride) (PIMA) chain. Tunable reactive groups tested in this study include azide, biotin, carboxyl, and amine. Cap exchange with these multilipoic acid ligands via a photochemical ligation strategy yields homogeneous QD dispersions that are colloidally stable over several biologically relevant conditions and for extended periods of time. The zwitterionic coating yields compact nanoparticle size and imparts nonsticky surface properties onto the QDs, preventing protein absorption. The introduction of a controllable number of reactive groups allows conjugation of the QDs to biomolecules via bio-orthogonal coupling chemistries including (1) attachment of the neurotransmitter dopamine to QDs via amine-isothiocyanate reaction to produce a platform capable of probing interactions with cysteine in proteins, based on charge transfer interactions; (2) self-assembly of biotinylated QDs with streptavidin-dye; and (3) ligation of azide-functionalized QDs to cyclooctyne-modified transferrin via copper-free click chemistry, used for intracellular delivery. This ligand design strategy can be used to prepare an array of metal-coordinating ligands adapted for coating other inorganic nanoparticles, including magnetic and plasmonic nanomaterials.

Gold core@silver semishell Janus nanoparticles prepared by interfacial etching

Gold core@silver semishell Janus nanoparticles were prepared by chemical etching of Au@Ag core-shell nanoparticles at the air/water interface. Au@Ag core-shell nanoparticles were synthesized by chemical deposition of a silver shell onto gold seed colloids followed by the self-assembly of 1-dodecanethiol onto the nanoparticle surface. The nanoparticles then formed a monolayer on the water surface of a Langmuir-Blodgett trough, and part of the silver shell was selectively etched away by the mixture of hydrogen peroxide and ammonia in the water subphase, where the etching was limited to the side of the nanoparticles that was in direct contact with water. The resulting Janus nanoparticles exhibited an asymmetrical distribution of silver on the surface of the gold cores, as manifested in transmission electron microscopy, UV-vis absorption, and X-ray photoelectron spectroscopy measurements. Interestingly, the Au@Ag semishell Janus nanoparticles exhibited enhanced electrocatalytic activity in oxygen reduction reactions, as compared to their Au@Ag and Ag@Au core-shell counterparts, likely due to a synergistic effect between the gold cores and silver semishells that optimized oxygen binding to the nanoparticle surface.

A self-assembled chiral-aptasensor for ATP activity detection

Circular dichroism (CD) has allowed the construction of various chiral nanomaterials for different applications, including biosensing. However, the determination of a simple target-specific, economical, and biocompatible platform using CD with intracellular detection and in situ molecular probing is still required. Here, we show that a DNA zip-fastener structure self-assembled chiral-aptasensor based on gold nanoparticle heterodimers provided an outstanding capability to quantify adenosine-5'-triphosphate (ATP) by addition. The conjugation of two ATP molecules to an adenosine aptamer allowed the formation of a stable ring structure, which formed an ATP-ring adhesive scaffold upon interaction with DNA complementary sequences linked with large gold nanoparticles, the latter were able to drop and result in a decrease in CD signal. We also showed that these low-cytotoxicity and polyethylene glycol (PEG)-steady nanoconjugates were also a one-step incubation technique for the quantification and monitoring of ATP in living cells modified by cell penetrating peptides (TAT) or Cy5. The results showed that the linear intracellular detection range was from 1.5 to 4.2 mM with a limit of detection (LOD) of 0.2 mM. Our findings suggest that this chiroplasmonic sensor is a promising approach for investigating biogenic biomolecules inside cells and living organisms and for assessing their biological activity.

Protein Corona Modulates Uptake and Toxicity of Nanoceria via Clathrin-Mediated Endocytosis

Particles present in diesel exhaust have been proposed as a significant contributor to the development of acute and chronic lung diseases, including respiratory infection and allergic asthma. Nanoceria (CeO2 nanoparticles) are used to increase fuel efficiency in internal combustion engines, are present in exhaust fumes, and could affect cells of the airway. Components from the environment such as biologically derived proteins, carbohydrates, and lipids can form a dynamic layer, commonly referred to as the "protein corona" which alters cellular nanoparticle interactions and internalization. Using confocal reflectance microscopy, we quantified nanoceria uptake by lung-derived cells in the presence and absence of a serum-derived protein corona. Employing mass spectrometry, we identified components of the protein corona, and demonstrated that the interaction between transferrin in the protein corona and the transferrin receptor is involved in mediating the cellular entry of nanoceria via clathrin-mediated endocytosis. Furthermore, under these conditions nanoceria does not affect cell growth, viability, or metabolism, even at high concentration. Alternatively, despite the antioxidant capacity of nanoceria, in serum-free conditions these nanoparticles induce plasma membrane disruption and cause changes in cellular metabolism. Thus, our results identify a specific receptor-mediated mechanism for nanoceria entry, and provide significant insight into the potential for nanoparticle-dependent toxicity.

The impacts of surface polarity on the solubility of nanoparticle

In order to study the dependence of water solubility and hydration behavior of nanoparticles on their surface polarity, we designed polar nanoparticles with varying surface polarity by assigning atomic partial charge to the surface of C60. The water solubility of the nanoparticle is enhanced by several orders of magnitude after the introduction of surface polarity. Nevertheless, when the atomic partial charge grows beyond a certain value (qM), the solubility continuously decreases to the level of nonpolar nanoparticle. It should be noted that such qM is comparable with atomic partial charge of a variety of functional groups. The hydration behaviors of nanoparticles were then studied to investigate the non-monotonic dependence of solubility on the surface polarity. The interaction between the polar nanoparticle and the hydration water is stronger than the nonpolar counterpart, which should facilitate the dissolution of the nanoparticles. On the other hand, the surface polarity also reduces the interaction of hydration water with the other water molecules and enhances the interaction between the nanoparticles which may hinder their dispersion. Besides, the introduction of surface polarity disturbs and even rearranges the hydration structure of nonpolar nanoparticle. Interestingly, the polar nanoparticle with less ordered hydration structure tends to have higher water solubility.

A multi-coordinating polymer ligand optimized for the functionalization of metallic nanocrystals and nanorods

We report the design and use of a multi-coordinating polymer ligand that is ideally suited for functionalizing gold nanoparticles and nanorods, and promoting their steric stabilization in buffer media. The ligand is prepared via a one-step nucleophilic addition reaction between poly(isobutylene-alt-maleic anhydride) and amine-modified anchoring groups and hydrophilic moieties. Surface functionalization of gold nanoparticles and nanorods with this polymer yields nanocrystals that exhibit excellent long-term colloidal stability over a broad range of conditions, including pH changes and in growth media, as verified using dynamic light scattering measurements combined with agarose gel electrophoresis. This polymer coating can also prevent the formation of protein corona. These features bode well for use in biological applications where small size, reduced nonspecific interactions and colloidal stability are highly desired. Furthermore, this design can be easily expanded to functionalize a variety of other inorganic nanocrystals.

A versatile approach towards multivalent saccharide displays on magnetic nanoparticles and phospholipid vesicles

A simple synthetic route has been devised for the production of coating agents that can give multivalent displays of saccharides on the surface of magnetite nanoparticles and phospholipid vesicles. A versatile and potentially high-throughput condensation reaction allowed the rapid synthesis of a variety of glycosylhydrazide conjugates with lipid, resorcinol or catechol termini, each in good yield and high anomeric purity. The hydrolytic stability of these adducts was assessed in D2O at different pD values using (1)H-NMR spectroscopy, whilst quartz crystal microbalance with dissipation monitoring (QCM-D) confirmed that the saccharide functionality on bilayers and on nanoparticles was still available to lectins. These multivalent saccharide displays promoted nanoparticle interactions with cells, for example N-acetylglucosamine-coated nanoparticles interacted much more effectively with 3T3 fibroblasts than uncoated nanoparticles with these cells. Despite potential sensitivity to oxidation, catechol coatings on magnetite nanoparticles were found to be more stable and generate better nanoparticle interactions with fibroblasts than resorcinol coatings.

Click Chemistry Immobilization of Antibodies on Polymer Coated Gold Nanoparticles

The goal of this work is to develop an innovative approach for the coating of gold nanoparticles (AuNPs) with a synthetic functional copolymer. This stable coating with a thickness of few nanometers provides, at the same time, stabilization and functionalization of the particles. The polymeric coating consists of a backbone of polydimethylacrylamide (DMA) functionalized with an alkyne monomer that allows the binding of azido modified molecules by Cu(I)-catalyzed azide/alkyne 1,3-dipolar cycloaddition (CuAAC, click chemistry). The thin polymer layer on the surface stabilizes the colloidal suspension whereas the alkyne functions pending from the backbone are available for the reaction with azido-modified proteins. The reactivity of the coating is demonstrated by immobilizing an azido modified anti-mouse IgG antibody on the particle surface. This approach for the covalent binding of antibody to a gold-NPs is applied to the development of gold labels in biosensing techniques.

Dynamic Covalent Nanoparticle Building Blocks

Rational and generalisable methods for engineering surface functionality will be crucial to realising the technological potential of nanomaterials. Nanoparticle-bound dynamic covalent exchange combines the error-correcting and environment-responsive features of equilibrium processes with the stability, structural precision, and vast diversity of covalent chemistry, defining a new and powerful approach for manipulating structure, function and properties at nanomaterial surfaces. Dynamic covalent nanoparticle (DCNP) building blocks thus present a whole host of possibilities for constructing adaptive systems, devices and materials that incorporate both nanoscale and molecular functional components. At the same time, DCNPs have the potential to reveal fundamental insights regarding dynamic and complex chemical systems confined to nanoscale interfaces.

Crosslinked duplex DNA nanogels that target specified proteins

Specific detection of protein biomarkers plays an important role in diagnostics and therapeutics. We have fabricated polymeric nanogels, which can specifically interact with the cancer biomarker thrombin to serve as a model. Two types of 2-methacryloyloxyethyl phosphorylcholine (MPC) copolymers bearing a thrombin-binding oligonucleotide aptamer and its complementary chain were independently synthesized by redox-initiated radical polymerization. These MPC polymers associate in a complimentary fashion due to double strand formation of the oligonucleotides in aqueous media, leading to the spontaneous formation of spherical nanogels. Nanogel formation was confirmed by dynamic light scattering (DLS) and transmittance microscopy. The average size of nanogel particles was 124 ± 2 nm and the nanogels were mono-dispersed (polydispersity index 0.21). Functional intercalators could be stably incorporated into nanogels through the physical interaction between the intercalators and the oligonucleotides. The ethidium bromide (EtBr)-incorporating nanogels were used as detectors for thrombin. The fluorescence intensity of solutions containing the EtBr-incorporating nanogels was decreased with an increase in the concentration of thrombin. The transformation of quadruplex-thrombin structure from complementary double-stranded structures resulted in the decrease in fluorescence intensity. In contrast, the intensity did not change when the nanogels were incubated with albumin. Thrombin is only one such model used to demonstrate this technique; oligonucleotide aptamers can be freely designed to interact with versatile bio-substances. Therefore, aptamer-crosslinked nanogels can be appropriate nanomaterials for disease diagnosis and therapy.

Single-particle spectroscopy of I-III-VI semiconductor nanocrystals: spectral diffusion and suppression of blinking by two-color excitation

Ternary I-III-VI semiconductor nanocrystals have been explored as non-toxic alternatives to II-VI semiconductors for optoelectronic and sensing applications, but large photoluminescence spectral width and moderate brightness restrict their practical use. Here, using single-particle photoluminescence spectroscopy on nanocrystals of (AgIn)xZn2(1-x)S2 we show that the photoluminescence band is inhomogeneously broadened and that size distribution is the dominant factor in the broadening. The residual homogeneous linewidth of individual nanocrystals reaches up to 75% of the ensemble spectral width. Single nanocrystals undergo spectral diffusion which also contributes to the inhomogeneous band. Excitation with two lasers with energies above and below the bandgap reveals coexistence of two emitting donor states within one particle. Spectral diffusion in such particles is due to temporal activation and deactivation of one such state. Filling of a trap state with a lower-energy laser enables optical modulation of photoluminescence intermittency (blinking) and leads to an almost two-fold increase in brightness.

Ultrasensitive multiplex optical quantification of bacteria in large samples of biofluids

Efficient treatments in bacterial infections require the fast and accurate recognition of pathogens, with concentrations as low as one per milliliter in the case of septicemia. Detecting and quantifying bacteria in such low concentrations is challenging and typically demands cultures of large samples of blood (~1 milliliter) extending over 24–72 hours. This delay seriously compromises the health of patients. Here we demonstrate a fast microorganism optical detection system for the exhaustive identification and quantification of pathogens in volumes of biofluids with clinical relevance (~1 milliliter) in minutes. We drive each type of bacteria to accumulate antibody functionalized SERS-labelled silver nanoparticles. Particle aggregation on the bacteria membranes renders dense arrays of inter-particle gaps in which the Raman signal is exponentially amplified by several orders of magnitude relative to the dispersed particles. This enables a multiplex identification of the microorganisms through the molecule-specific spectral fingerprints.

Bright fluorogenic squaraines with tuned cell entry for selective imaging of plasma membrane vs. endoplasmic reticulum

A rational design of squaraine dyes with lipophilic and zwitterionic groups tunes cell entry, allowing for selective far-red/near-infrared imaging of plasma membrane vs. endoplasmic reticulum. They exhibit up to 110-fold fluorescence enhancement in biomembranes and enable cellular imaging at 1 nM concentration, which make them the brightest membrane probes to date.

Metal-linked Immunosorbent Assay (MeLISA): the Enzyme-Free Alternative to ELISA for Biomarker Detection in Serum

Determination of disease biomarkers in clinical samples is of crucial significance for disease monitoring and public health. The dominating format is enzyme-linked immunosorbent assay (ELISA), which subtly exploits both the antigen-antibody reaction and biocatalytic property of enzymes. Although enzymes play an important role in this platform, they generally suffer from inferior stability and less tolerant of temperature, pH condition compared with general chemical product. Here, we demonstrate a metal-linked immunosorbent assay (MeLISA) based on a robust signal amplification mechanism that faithfully replaces the essential element of the enzyme. As an enzyme-free alternative to ELISA, this methodology works by the detection of α-fetoprotein (AFP), prostatic specific antigen (PSA) and C-reactive protein (CRP) at concentrations of 0.1 ng mL(-1), 0.1 ng mL(-1) and 1 ng mL(-1) respectively. It exhibits approximately two magnitudes higher sensitivity and is 4 times faster for chromogenic reaction than ELISA. The detection of AFP and PSA was further confirmed by over a hundred serum samples from hepatocellular carcinoma (HCC) and prostate cancer patients respectively.

Integrity of lipid nanocarriers in bloodstream and tumor quantified by near-infrared ratiometric FRET imaging in living mice

Lipid nanocarriers are considered as promising candidates for drug delivery and cancer targeting because of their low toxicity, biodegradability and capacity to encapsulate drugs and/or contrasting agents. However, their biomedical applications are currently limited because of a poor understanding of their integrity in vivo. To address this problem, we report on fluorescent nano-emulsion droplets of 100 nm size encapsulating lipophilic near-infrared cyanine 5.5 and 7.5 dyes with a help of bulky hydrophobic counterion tetraphenylborate. Excellent brightness and efficient Förster Resonance Energy Transfer (FRET) inside lipid NCs enabled for the first time quantitative fluorescence ratiometric imaging of NCs integrity directly in the blood circulation, liver and tumor xenografts of living mice using a whole-animal imaging set-up. This unique methodology revealed that the integrity of our FRET NCs in the blood circulation of healthy mice is preserved at 93% at 6 h of post-administration, while it drops to 66% in the liver (half-life is 8.2 h). Moreover, these NCs show fast and efficient accumulation in tumors, where they enter in nearly intact form (77% integrity at 2 h) before losing their integrity to 40% at 6 h (half-life is 4.4 h). Thus, we propose a simple and robust methodology based on ratiometric FRET imaging in vivo to evaluate quantitatively nanocarrier integrity in small animals. We also demonstrate that nano-emulsion droplets are remarkably stable nano-objects that remain nearly intact in the blood circulation and release their content mainly after entering tumors.

Surface-Enhanced Raman Spectroscopy Biosensing: In Vivo Diagnostics and Multimodal Imaging

This perspective presents recent developments in the application of surface-enhanced Raman spectroscopy (SERS) to biosensing, with a focus on in vivo diagnostics. We describe the concepts and methodologies developed to date and the target analytes that can be detected. We also discuss how SERS has evolved from a "point-and-shoot" stand-alone technique in an analytical chemistry laboratory to an integrated quantitative analytical tool for multimodal imaging diagnostics. Finally, we offer a guide to the future of SERS in the context of clinical diagnostics.

Noble metal, oxide and chalcogenide-based nanomaterials from scalable phototrophic culture systems

Phototrophic cell or tissue cultures can produce nanostructured noble metals, oxides and chalcogenides at ambient temperatures and pressures in an aqueous environment and without the need for potentially toxic solvents or the generation of dangerous waste products. These "green" synthesized nanobiomaterials can be used to fabricate biosensors and bio-reporting tools, theranostic vehicles, medical imaging agents, as well as tissue engineering scaffolds and biomaterials. While successful at the lab and experimental scales, significant barriers still inhibit the development of higher capacity processes. While scalability issues in traditional algal bioprocess engineering are well known, such as the controlled delivery of photons and gas-exchange, the large-scale algal synthesis of nanomaterials introduces additional parameters to be understood, i.e., nanoparticle (NP) formation kinetics and mechanisms, biological transport of metal cations and the effect of environmental conditions on the final form of the NPs. Only after a clear understanding of the kinetics and mechanisms can the strain selection, photobioreactor type, medium pH and ionic strength, mean light intensity and other relevant parameters be specified for an optimal bioprocess. To this end, this mini-review will examine the current best practices and understanding of these phenomena to establish a path forward for this technology.

Naked-eye fingerprinting of single nucleotide polymorphisms on psoriasis patients

We report a low-cost test, based on gold nanoparticles, for the colorimetric (naked-eye) fingerprinting of a panel of single nucleotide polymorphisms (SNPs), relevant for the personalized therapy of psoriasis. Such pharmacogenomic tests are not routinely performed on psoriasis patients, due to the high cost of standard technologies. We demonstrated high sensitivity and specificity of our colorimetric test by validating it on a cohort of 30 patients, through a double-blind comparison with two state-of-the-art instrumental techniques, namely reverse dot blotting and sequencing, finding 100% agreement. This test offers high parallelization capabilities and can be easily generalized to other SNPs of clinical relevance, finding broad utility in diagnostics and pharmacogenomics.

Bioinspired Synthesis of All-in-One Organic-Inorganic Hybrid Nanoflowers Combined with a Handheld pH Meter for On-Site Detection of Food Pathogen

With a mild elaborately bioinspired one-pot process, Con A-GOx-CaHPO4 nanoflowers are prepared. Employing the as-prepared all-in-one hybrid nanoflowers as signal tags, a simple but potentially powerful amplification biosensing technology for the detection of food pathogen with excellent simplicity, portability, sensitivity, and adaptability is achieved.

The role of halide ions in the anisotropic growth of gold nanoparticles: a microscopic, atomistic perspective

We provide a microscopic view of the role of halides in controlling the anisotropic growth of gold nanorods through a combined computational and experimental study. Atomistic molecular dynamics simulations unveil that Br(-) adsorption is not only responsible for surface passivation, but also acts as the driving force for CTAB micelle adsorption and stabilization on the gold surface in a facet-dependent way. The partial replacement of Br(-) by Cl(-) decreases the difference between facets and the surfactant density. Finally, in the CTAC solution, no halides or micellar structures protect the gold surface and further gold reduction should be uniformly possible. Experimentally observed nanoparticle's growth in different CTAB/CTAC mixtures is more uniform and faster as the amount of Cl(-) increases, confirming the picture from the simulations. In addition, the surfactant layer thickness measured on nanorods exposed to CTAB and CTAC quantitatively agrees with the simulation results.

A nucleic acid strand displacement system for the multiplexed detection of tuberculosis-specific mRNA using quantum dots

The development of rapid, robust and high performance point-of-care diagnostics relies on the advancement and combination of various areas of research. We have developed an assay for the detection of multiple mRNA molecules that combines DNA nanotechnology with fluorescent nanomaterials. The core switching mechanism is toehold-mediated strand displacement. We have used fluorescent quantum dots (QDs) as signal transducers in this assay, as they bring many benefits including bright fluorescence and multiplexing abilities. The resulting assay is capable of multiplexed detection of long RNA targets against a high concentration of background non-target RNA, with high sensitivity and specificity and limits of detection in the nanomolar range using only a standard laboratory plate reader. We demonstrate the utility of our QD-based system for the detection of two genes selected from a microarray-derived tuberculosis-specific gene expression signature. Levels of up- and downregulated gene transcripts comprising this signature can be combined to give a disease risk score, making the signature more amenable for use as a diagnostic marker. Our QD-based approach to detect these transcripts could pave the way for novel diagnostic assays for tuberculosis.

Elucidating Strong Field Photochemical Reduction Mechanisms of Aqueous [AuCl4](-): Kinetics of Multiphoton Photolysis and Radical-Mediated Reduction

Direct, multiphoton photolysis of aqueous metal complexes is found to play an important role in the formation of nanoparticles in solution by ultrafast laser irradiation. In situ absorption spectroscopy of aqueous [AuCl4](-) reveals two mechanisms of Au(0) nucleation: (1) direct multiphoton photolysis of [AuCl4](-) and (2) radical-mediated reduction of [AuCl4](-) upon multiphoton photolysis of water. Measurement of the reaction kinetics as a function of solution pH reveals zeroth-, first-, and second-order components. The radical-mediated process is found to be zeroth-order in [AuCl4](-) under acidic conditions, where the reaction rate is limited by the production of reactive radical species from water during each laser shot. Multiphoton photolysis is found to be first order in [AuCl4](-) at all pHs, whereas the autocatalytic reaction with H2O2, the photolytic reaction product of water, is second order.

The Significance of Multivalent Bonding Motifs and "Bond Order" in DNA-Directed Nanoparticle Crystallization

Multivalent oligonucleotide-based bonding elements have been synthesized and studied for the assembly and crystallization of gold nanoparticles. Through the use of organic branching points, divalent and trivalent DNA linkers were readily incorporated into the oligonucleotide shells that define DNA-nanoparticles and compared to monovalent linker systems. These multivalent bonding motifs enable the change of "bond strength" between particles and therefore modulate the effective "bond order." In addition, the improved accessibility of strands between neighboring particles, either due to multivalency or modifications to increase strand flexibility, gives rise to superlattices with less strain in the crystallites compared to traditional designs. Furthermore, the increased availability and number of binding modes also provide a new variable that allows previously unobserved crystal structures to be synthesized, as evidenced by the formation of a thorium phosphide superlattice.

Enzyme-responsive polymer hydrogels for therapeutic delivery

Enzymes play a central role in a spectrum of fundamental physiological processes and their altered expression level has been associated with many diseases and pathological disorders. Enzymes therefore can be exploited as a pristine biological trigger to tune material responses and to achieve controlled release of biomolecules at desired sites. This mini-review highlights enzyme-responsive polymer hydrogels for therapeutic delivery applications developed within the last five years, focusing on protease- and glycosidase-based catalyzed reactions. Strategies employed to produce responsive materials are described. Successful applications for controlled drug delivery are highlighted, and finally, future opportunities and challenges are presented.

What is the role of curvature on the properties of nanomaterials for biomedical applications?

The use of nanomaterials for drug delivery and theranostics applications is a promising paradigm in nanomedicine, as it brings together the best features of nanotechnolgy, molecular biology, and medicine. To fully exploit the synergistic potential of such interdisciplinary strategy, a comprehensive description of the interactions at the interface between nanomaterials and biological systems is not only crucial, but also mandatory. Routine strategies to engineer nanomaterial-based drugs comprise modifying their surface with biocompatible and targeting ligands, in many cases resorting to modular approaches that assume additive behavior. However, emergent behavior can be observed when combining confinement and curvature. The final properties of functionalized nanomaterials become dependent not only on the properties of their constituents but also on the geometry of the nano-bio interface, and on the local molecular environment. Modularity no longer holds, and the coupling between interactions, chemical equilibrium, and molecular organization has to be directly addressed in order to design smart nanomaterials with controlled spatial functionalization envisioning optimized biomedical applications. Nanoparticle's curvature becomes an integral part of the design strategy, enabling to control and engineer the chemical and surface properties with molecular precision. Understanding how nanoparticle size, morphology, and surface chemistry are interrelated will put us one step closer to engineering nanobiomaterials capable of mimicking biological structures and their behaviors, paving the way into applications and the possibility to elucidate the use of curvature by biological systems. WIREs Nanomed Nanobiotechnol 2016, 8:334-354. doi: 10.1002/wnan.1365 For further resources related to this article, please visit the WIREs website.

Simple and Sensitive Colorimetric Detection of Dopamine Based on Assembly of Cyclodextrin-Modified Au Nanoparticles

A controlled assembly of natural beta-cyclodextrin modified Au NPs mediated by dopamine is demonstrated. Furthermore, a simple and sensitive colorimetric detection for dopamine is established by the concentration-dependent assembly.

Understanding and Designing the Gold-Bio Interface: Insights from Simulations

Gold nanoparticles (AuNPs) are an integral part of many exciting and novel biomedical applications, sparking the urgent need for a thorough understanding of the physicochemical interactions occurring between these inorganic materials, their functional layers, and the biological species they interact with. Computational approaches are instrumental in providing the necessary molecular insight into the structural and dynamic behavior of the Au-bio interface with spatial and temporal resolutions not yet achievable in the laboratory, and are able to facilitate a rational approach to AuNP design for specific applications. A perspective of the current successes and challenges associated with the multiscale computational treatment of Au-bio interfacial systems, from electronic structure calculations to force field methods, is provided to illustrate the links between different approaches and their relationship to experiment and applications.

Nanoparticles and DNA - a powerful and growing functional combination in bionanotechnology

Functionally integrating DNA and other nucleic acids with nanoparticles in all their different physicochemical forms has produced a rich variety of composite nanomaterials which, in many cases, display unique or augmented properties due to the synergistic activity of both components. These capabilities, in turn, are attracting greater attention from various research communities in search of new nanoscale tools for diverse applications that include (bio)sensing, labeling, targeted imaging, cellular delivery, diagnostics, therapeutics, theranostics, bioelectronics, and biocomputing to name just a few amongst many others. Here, we review this vibrant and growing research area from the perspective of the materials themselves and their unique capabilities. Inorganic nanocrystals such as quantum dots or those made from gold or other (noble) metals along with metal oxides and carbon allotropes are desired as participants in these hybrid materials since they can provide distinctive optical, physical, magnetic, and electrochemical properties. Beyond this, synthetic polymer-based and proteinaceous or viral nanoparticulate materials are also useful in the same role since they can provide a predefined and biocompatible cargo-carrying and targeting capability. The DNA component typically provides sequence-based addressability for probes along with, more recently, unique architectural properties that directly originate from the burgeoning structural DNA field. Additionally, DNA aptamers can also provide specific recognition capabilities against many diverse non-nucleic acid targets across a range of size scales from ions to full protein and cells. In addition to appending DNA to inorganic or polymeric nanoparticles, purely DNA-based nanoparticles have recently surfaced as an excellent assembly platform and have started finding application in areas like sensing, imaging and immunotherapy. We focus on selected and representative nanoparticle-DNA materials and highlight their myriad applications using examples from the literature. Overall, it is clear that this unique functional combination of nanomaterials has far more to offer than what we have seen to date and as new capabilities for each of these materials are developed, so, too, will new applications emerge.

Modulation of population density and size of silver nanoparticles embedded in bacterial cellulose via ammonia exposure: visual detection of volatile compounds in a piece of plasmonic nanopaper

The localized surface plasmon resonance exhibited by noble metal nanoparticles can be sensitively tuned by varying their size and interparticle distances. We report that corrosive vapour (ammonia) exposure dramatically reduces the population density of silver nanoparticles (AgNPs) embedded within bacterial cellulose, leading to a larger distance between the remaining nanoparticles and a decrease in the UV-Vis absorbance associated with the AgNP plasmonic properties. We also found that the size distribution of AgNPs embedded in bacterial cellulose undergoes a reduction in the presence of volatile compounds released during food spoilage, modulating the studied nanoplasmonic properties. In fact, such a plasmonic nanopaper exhibits a change in colour from amber to light amber upon the explored corrosive vapour exposure and from amber to a grey or taupe colour upon fish or meat spoilage exposure. These phenomena are proposed as a simple visual detection of volatile compounds in a flexible, transparent, permeable and stable single-use nanoplasmonic membrane, which opens the way to innovative approaches and capabilities in gas sensing and smart packaging.

Fluorescent Polymer Nanoparticles Based on Dyes: Seeking Brighter Tools for Bioimaging

Speed, resolution and sensitivity of today's fluorescence bioimaging can be drastically improved by fluorescent nanoparticles (NPs) that are many-fold brighter than organic dyes and fluorescent proteins. While the field is currently dominated by inorganic NPs, notably quantum dots (QDs), fluorescent polymer NPs encapsulating large quantities of dyes (dye-loaded NPs) have emerged recently as an attractive alternative. These new nanomaterials, inspired from the fields of polymeric drug delivery vehicles and advanced fluorophores, can combine superior brightness with biodegradability and low toxicity. Here, we describe the strategies for synthesis of dye-loaded polymer NPs by emulsion polymerization and assembly of pre-formed polymers. Superior brightness requires strong dye loading without aggregation-caused quenching (ACQ). Only recently several strategies of dye design were proposed to overcome ACQ in polymer NPs: aggregation induced emission (AIE), dye modification with bulky side groups and use of bulky hydrophobic counterions. The resulting NPs now surpass the brightness of QDs by ≈10-fold for a comparable size, and have started reaching the level of the brightest conjugated polymer NPs. Other properties, notably photostability, color, blinking, as well as particle size and surface chemistry are also systematically analyzed. Finally, major and emerging applications of dye-loaded NPs for in vitro and in vivo imaging are reviewed.