Chemicals from lignin: an interplay of lignocellulose fractionation, depolymerisation, and upgrading

Hydrogenation of Abies Wood and Ethanol Lignin by Hydrogen in Supercritical Ethanol in the Presence of Bifunctional Catalyst Pt/ZrO₂

The effect of bifunctional catalyst Pt/ZrO₂ on the yield and composition of products of abies wood and ethanol lignin hydrogenation in supercritical ethanol at temperature of 250 °C was established. In the process of abies wood hydrogenation, the catalyst Pt/ZrO₂ increases the degree of conversion of wood from 52.0 to 65.7 wt.%, the yield of liquid products from 31.0 to 38.1 wt.%,.%, and also increases the content of monomeric compounds in the liquid products. In the presence of catalyst, the cellulose content in the solid product of wood catalytic hydrogenation reaches to 77.1 wt.%, and the content of lignin and hemicelluloses decreases to 21.2 wt.% and 1.7 wt.%, respectively. In the process of ethanol lignin hydrogenation the catalyst Pt/ZrO₂ increases the degree of lignin conversion from 86.0 to 99.4 wt.%, the yield of liquid products from 75.0 to 90.0 wt.%, and also reduces the yield of solid residue from 14.0 to 0.6 wt.% and the yield of gases from 4.7 to 3.3 wt.%. Thus, the polysaccharides of wood biomass complicate the reductive depolymerization of native lignin in comparison with the depolymerization of isolated ethanol lignin. The use of the catalyst Pt/ZrO₂ makes it possible to fractionate the abies wood in supercritical ethanol at 250 °C on solid product with a high content of cellulose, as well as liquid and gaseous products from lignin and hemicelluloses

Visible-Light-Driven Cleavage of C-O Linkage for Lignin Valorization to Functionalized Aromatics

Lignin is the most abundant source of renewable aromatics. Catalytic valorization of lignin into functionalized aromatics is attractive but challenging. Photocatalysis is a promising sustainable approach. The strategies for designing well-performing photocatalysts are desired but remain limited. Herein, a facile energy band engineering strategy for promoting the photocatalytic activity of zinc-indium-sulfide (Zn_m In₂ S_m+3 ) for cleavage of the lignol β-O-4 bond under mild conditions was developed. The energy band structure of Zn_m In₂ S_m+3 could be tuned by controlling the atomic ratio of Zn/In. It was found that Zn₄ In₂ S₇ performed best for cleavage of the β-O-4 bond under visible-light irradiation, owing to its appropriate energy band structure for offering adequate visible-light absorption and suitable redox capability. Functionalized aromatic monomers with near 18.4 wt % yield could be obtained from organosolv birch lignin. Mechanistic studies revealed that the β-O-4 bond was efficiently cleaved mainly through a one-step redox-neutral pathway via a C_α radical intermediate. The thiol groups on the surface of Zn₄ In₂ S₇ played a key role in cleavage of the β-O-4 bond.

Efficient Mild Organosolv Lignin Extraction in a Flow-Through Setup Yielding Lignin with High β-O-4 Content

Current lignin fractionation methods use harsh conditions that alter the native lignin structure, resulting in a recalcitrant material which is undesired for downstream processing. Milder fractionation processes allow for the isolation of lignins that are high in β-aryl ether (β-O-4) content, however, at reduced extraction efficiency. The development of improved lignin extraction methods using mild conditions is therefore desired. For this reason, a flow-through setup for mild ethanosolv extraction (120 °C) was developed. The influence of acid concentration, ethanol/water ratio, and the use of other linear alcohol co-solvents on the delignification efficiency and the β-O-4 content were evaluated. With walnut shells as model feedstock, extraction efficiencies of over 55% were achieved, yielding lignin with a good structural quality in terms of β-O-4 linking motifs (typically over 60 per 100 aromatic units). For example, lignin containing 66 β-O-4 linking motifs was obtained with an 80:20 n-propanol/water ratio, 0.18 M H₂SO₄ with overall a good extraction efficiency of 57% after 5 h. The majority of the lignin was extracted in the first 2 hours and this lignin showed the best structural quality. Compared to batch extractions, both higher lignin extraction efficiency and higher β-O-4 content were obtained using the flow setup.

Effect of Reaction Conditions on Catalytic and Noncatalytic Lignin Solvolysis in Water Media Investigated for a 5 L Reactor

The high content of oxygen in the lignin polymer and the prevalence of phenolic functional groups make the conversion of lignin to fuels and value-added products with well-defined chemical properties challenging. The lignin-to-liquid process using a water/formic acid reaction medium has been shown to convert the lignin polymer to monomers with a molecular weight range of 300-600 Da. The bio-oil comprises a complex mixture of monomeric phenols, aromatics, and aliphatic hydrocarbons with a high H/C and low O/C ratio. This study investigates the effect of the stirring rate, level of loading, and catalyst at 305 and 350 °C in a 5 L pilot scale reactor. The oil yields are found to be highest for experiments conducted using the maximum stirring rate, maximum level of loading, and Ru/Al₂O₃ catalyst with yields of more than 69 wt % on lignin intake. Goethite as a catalyst does not show good conversion efficiency at either reaction temperatures. The carbon recovery is highest for products produced at 305 °C. Furthermore, results from solid phase extraction on a DSC-CN solid phase show that 65-92 wt % the bio-oils can be recovered as fractions separated based on polarity.

Unassisted solar lignin valorisation using a compartmented photo-electro-biochemical cell

Lignin is a major component of lignocellulosic biomass. Although it is highly recalcitrant to break down, it is a very abundant natural source of valuable aromatic carbons. Thus, the effective valorisation of lignin is crucial for realising a sustainable biorefinery chain. Here, we report a compartmented photo-electro-biochemical system for unassisted, selective, and stable lignin valorisation, in which a TiO₂ photocatalyst, an atomically dispersed Co-based electrocatalyst, and a biocatalyst (lignin peroxidase isozyme H8, horseradish peroxidase) are integrated, such that each system is separated using Nafion and cellulose membranes. This cell design enables lignin valorisation upon irradiation with sunlight without the need for any additional bias or sacrificial agent and allows the protection of the biocatalyst from enzyme-damaging elements, such as reactive radicals, gas bubbles, and light. The photo-electro-biochemical system is able to catalyse lignin depolymerisation with a 98.7% selectivity and polymerisation with a 73.3% yield using coniferyl alcohol, a lignin monomer.

Enhancing the Antioxidant Activity of Technical Lignins by Combining Solvent Fractionation and Ionic-Liquid Treatment

A grass soda technical lignin (PB1000) underwent a process combining solvent fractionation and treatment with an ionic liquid (IL), and a comprehensive investigation of the structural modifications was performed by using high-performance size-exclusion chromatography, 31 P NMR spectroscopy, thioacidolysis, and GC-MS. Three fractions with distinct reactivity were recovered from successive ethyl acetate (EA), butanone, and methanol extractions. In parallel, a fraction deprived of EA extractives was obtained. The samples were treated with methyl imidazolium bromide ([HMIM]Br) by using either conventional heating or microwave irradiation. The treatment allowed us to solubilize 28 % of the EA-insoluble fraction and yielded additional free phenols in all the fractions, as a consequence of depolymerization and demethylation. The gain of the combined process in terms of antioxidant properties was demonstrated through 2,2-diphenyl-1-picrylhydrazyl (DPPH. ) radical-scavenging tests. Integrating further IL safety-related data and environmental considerations, this study paves the way for the sustainable production of phenolic oligomers competing with commercial antioxidants.

A Review on Styrene Substitutes in Thermosets and Their Composites

In recent decades, tremendous interest and technological development have been poured into thermosets and their composites. The thermosets and composites with unsaturated double bonds curing system are especially concerned due to their versatility. To further exploit such resins, reactive diluents (RDs) with unsaturated sites are usually incorporated to improve their processability and mechanical properties. Traditional RD, styrene, is a toxic volatile organic compound and one of the anticipated carcinogens warned by the National Institute of Health, USA. Most efforts have been conducted on reducing the usage of styrene in the production of thermosets and their composites, while very few works have systematically summarized these literatures. Herein, recent developments regarding styrene substitutes in thermosets and their composites are reviewed. Potential styrene alternatives, such as vinyl derivatives of benzene and (methyl)acrylates are discussed in details. Emphasis is focused on the strategies on developing novel RD monomers through grafting unsaturated functional groups on renewable feedstocks such as carbohydrates, lignin, and fatty acids. This review also highlights the development and characteristics of RD monomers and their influence on processability and mechanical performance of the resulting thermosets and composites.

Catalytic pyrolysis of soda lignin over zeolites using pyrolysis gas chromatography-mass spectrometry

Catalytic fast pyrolysis of soda lignin was examined at different temperatures (500,600,700,800 and 900 °C) in the presence of three zeolites with different Si/Al ratio using the Py-GC/MS in order to investigate best catalytic system. The three zeolites are y-zeolite (8-9), mordenite (15-17), ZSM-5 (30-40), which have static pore sizes 0.74, 0.65, and 0.59 nm respectively. The shape and acidity of zeolites, as well as pyrolysis temperature, have a significant effect on product distribution in catalytic fast pyrolysis. Y-zeolite was the most effective catalytic system among all catalysts for deomethoxylation and dehydroxylation of small oxygenates as well as bulky oxygenates to produce aromatics. However, mordenite and ZSM-5 could not convert the large oxygenates due to size exclusion and pore blockage. Highest yield of aromatics with significant amount of aromatic dimers was obtained over y-zeolite and then yield of aromatics followed in order by mordenite and ZSM-5 at 800 °C.

Activation of lignin by selective oxidation: An emerging strategy for boosting lignin depolymerization to aromatics

Lignin is the most abundant, renewable aromatic resource on earth and holds great potential for the production of value-added chemicals. The efficient valorization of lignin requires to deal with several formidable challenges, especially to prevent it from re-condensation reactions during its depolymerization. Recently, a strategy involving the activation of lignin side chains by selective oxidation of the benzylic alcohol in β-O-4 linkages to facilitate lignin degradation to aromatic monomers has become very popular. This strategy provides great advantages for lignin selective degradation to high yields of aromatics under mild conditions, but requires an additional pre-oxidation step. The purpose of this review is to provide the latest cutting-edge innovations of this novel approach. Various catalytic systems, including those using chemo-catalytic methods, physio-chemo catalytic methods, and/or bio-catalytic methods, for the oxidative activation of lignin side chains are summarized. By analyzing the current situation of lignin depolymerization, certain promising directions are emphasized.

Advances in lignin valorization towards bio-based chemicals and fuels: Lignin biorefinery

Lignin is one of the most promising renewable sources for aromatic hydrocarbons, while effective depolymerization towards its constituent monomers is a particular challenge because of the structural complexity and stability. Intensive research efforts have been directed towards exploiting effective valorization of lignin for the production of bio-based platform chemicals and fuels. The present contribution aims to provide a critical review of key advances in the identification of exact lignin structure subjected to various fractionation technologies and demonstrate the key roles of lignin structures in depolymerization for unique functionalized products. Various technologies (e.g., thermocatalytic approaches, photocatalytic conversion, and mechanochemical depolymerization) are reviewed and evaluated in terms of feasibility and potential for further upgrading. Overall, advances in pristine lignin structure analysis and conversion technologies can facilitate recovery and subsequent utilization of lignin towards tailored commodity chemicals and fungible fuels.

Construction of Antifouling Membrane Surfaces through Layer-by-Layer Self-Assembly of Lignosulfonate and Polyethyleneimine

Lignin is the second most abundant and low-cost natural polymer, but its high value-added utilization is still lack of effective and economic ways. In this paper, waste lignosulfonate (LS) was introduced to fabricate antifouling membrane surfaces via layer-by-layer self-assembly with polyethyleneimine (PEI). The LS/PEI multilayers were successfully deposited on the polysulfone (PSf) membrane, as demonstrated by ATR-FTIR, XPS, Zeta potential measurements, AFM, and SEM. Meanwhile, the effect of the number of bilayers was investigated in detail on the composition, morphologies, hydrophilicity, and antifouling performance of the membrane surface. As a result, with the bilayer numbers increase to 5, the PSf membrane shows smooth surface with small roughness, and its water contact angle reduces to 44.1°, indicating the improved hydrophilicity. Accordingly, the modified PSf membrane with 5 LS/PEI bilayers repels the adsorption of protein, resulting in good antifouling performance. This work provides a green, facile, and low-cost strategy to construct antifouling membrane surfaces.

Enhanced Selective Production of Arenes and Regenerating Rate in Aryl Ether Hydrogenolysis over Mesoporous Nickel in Plug-Flow Reactors

Ordered mesoporous nickel (mesoNi) was successfully synthesized with a hard templating method by using KIT-6 ordered mesoporous silica as a template. With small-angle X-ray diffraction (SAXRD), transmission electron microscopy (TEM) and N2 sorption technique, the mesoporous structures of synthesized catalysts were characterized with desired high surface area (84.2 m2·g−1) and narrow pore size distribution. MesoNi exhibited outstanding catalytic cleavage activity for lignin model compounds (benzyl phenyl ether, BPE) with high selectivity of arenes in the flow reactor system. MesoNi also showed higher regeneration rates than non-porous ones, which were confirmed from deactivation and regeneration mechanism studies in the flow reaction system with varied high temperature and pressure. The adsorbed poisoning species on the mesoporous Ni surface were analyzed and phenol could be the main poisoning species. The excellent catalytic cleavage performance of mesoNi originates from their unique mesoporous structure, which offers high surface area and Ni active sites. The outstanding catalytic performance shows that this process provides a promising candidate for improved lignin valorization with general applicability.

From Wood to Tetrahydro-2-benzazepines in Three Waste-Free Steps: Modular Synthesis of Biologically Active Lignin-Derived Scaffolds

Inherently complex, lignin-derived aromatic monomers comprising valuable structural moieties present in many pharmaceuticals would serve as ideal substrates for the construction of biologically active molecules. Here, we describe a strategy that incorporates all intrinsic functional groups present in platform chemicals obtained by lignin depolymerization into value-added amines, using sustainable catalytic methods and benign solvents. Our strikingly efficient protocol provides access to libraries of aminoalkyl-phenol derivatives and seven-membered N-heterocycles directly from wood in two, respectively three, waste-free steps. Several molecules in these libraries have shown promising antibacterial or anticancer activities, emphasizing the advantage of this modular synthetic strategy and the potential for drug discovery. The sustainable catalytic pathways presented here can lead to significant benefits for the pharmaceutical industry where reduction of hazardous waste is a prime concern, and the described strategies that lead to high-value products from non-edible biomass waste streams also markedly increase the economic feasibility of lignocellulosic biorefineries.

Microwave-assisted co-pyrolysis of lignin and waste oil catalyzed by hierarchical ZSM-5/MCM-41 catalyst to produce aromatic hydrocarbons

Microwave-assisted catalytic fast co-pyrolysis (MACFP) of lignin and waste oil with SiC as microwave absorbent and hierarchical ZSM-5/MCM-41 as catalyst were implemented in a microwave-induced reactor. ZSM-5/MCM-41 is a kind of composite catalyst with MCM-41 as shell and ZSM as core. The effects of catalyst temperature, the ratio of feedstock-to-catalyst and the ratio of two reactants (lignin and waste oil) on product distribution and yield were studied. The study shows that catalytic co-pyrolysis is a complex reaction process, and many reaction conditions could affect the final reaction results. The optimum reaction conditions are as follows: catalytic temperature 400 °C, the feedstock-to-catalyst ratio of 10:1 and the ratio of lignin to waste oil of 2:1. Under this reaction condition, the conversion of feedstocks reached 76.00%, the proportion of aromatics was 50.31% and the selectivity of monocyclic aromatic hydrocarbons (MAHs) was 42.83%.

A review on biopolymer production via lignin valorization

Lignin based biopolymer (value added products) production is the most promising technology in the perspective of lignin valorization and sustainable development. Valorization of lignin gain the potentials to produce biopolymers such as polyhydroxyalkanoates, polyhydroxybutyrates, polyurethane etc. However, lignin valorization processes still needs development due to the recalcitrant nature of lignin which restricts its potential to produce valuable products. Many novel extraction strategies have been developed to fragment the lignin structure and make ease the recovery of valuable products. Achieving in depth insights on lignin characteristics and structure will help to understand the metabolic and catalytic degradative pathways needed for lignin valorization. In the view of multipurpose characteristics of lignin for biopolymer production, this review will spot light the potential applications of lignin and lignin based derivatives on biopolymer production, various lignin separation technologies, lignin depolymerization process, biopolymers production strategies and the challenges in lignin valorization will be addressed and discussed.

Activating molecular oxygen with Au/CeO2 for the conversion of lignin model compounds and organosolv lignin

Au/CeO2 was demonstrated to be a high efficiency catalyst for the conversion of 2-phenoxyacetophenol (PP-ol) employing O2 as an oxidant and methyl alcohol as the solvent without using an erosive strong base or acid. Mechanistic investigations, including emission quenching experiments, electron spin-resonance (ESR) and intermediate verification experiments, were carried out. The results verified that the superoxide anion activated by Au/CeO2 from molecular oxygen plays a vital role in the oxidation of lignin model compounds, and the cleavage of both the β-O-4 and Cα-Cβ linkages was involved. Au/CeO2 also performed well in the oxidative conversion of organosolv lignin under mild conditions (453 K), producing vanillin (10.5 wt%), methyl vanillate (6.8 wt%), methylene syringate (3.4 wt%) and a ring-opened product. Based on the detailed characterization data and mechanistic results, Au/CeO2 was confirmed to be a promising catalytic system.

Establishing lignin structure-upgradeability relationships using quantitative 1H-13C heteronuclear single quantum coherence nuclear magnetic resonance (HSQC-NMR) spectroscopy

Lignin depolymerization could provide an attractive renewable aromatic feedstock for the chemical industry. Past studies have suggested that lignin structural features such as ether content are correlated to lignin's upgradeability. An obstacle to the development of a conclusive causal relationship between lignin structure and upgradeability has been the difficulty to quantitatively measure lignin structural features. Here, we demonstrated that a modified HSQC-NMR method known as HSQC0 can accurately quantify lignin functionalities in extracted lignin using several synthetic polymer models. We then prepared a range of isolated lignin samples with a wide range of ether contents (6-46%). By using a simple ether cleavage model, we were able to predict final depolymerization yields very accurately (<4% error), conclusively demonstrating the direct causal relationship between ether content and lignin activity. The accuracy of this model suggests that, unlike in native lignin, ether linkages no longer appear to be randomly distributed in isolated lignin.

Lignin: A Biopolymer from Forestry Biomass for Biocomposites and 3D Printing

Biopolymers from forestry biomass are promising for the sustainable development of new biobased materials. As such, lignin and fiber-based biocomposites are plausible renewable alternatives to petrochemical-based products. In this study, we have obtained lignin from Spruce biomass through a soda pulping process. The lignin was used for manufacturing biocomposite filaments containing 20% and 40% lignin and using polylactic acid (PLA) as matrix material. Dogbones for mechanical testing were 3D printed by fused deposition modelling. The lignin and the corresponding biocomposites were characterized in detail, including thermo-gravimetric analysis (TGA), differential scanning calorimetry (DSC), Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction analysis (XRD), antioxidant capacity, mechanical properties, and scanning electron microscopy (SEM). Although lignin led to a reduction of the tensile strength and modulus, the reduction could be counteracted to some extent by adjusting the 3D printing temperature. The results showed that lignin acted as a nucleating agent and thus led to further crystallization of PLA. The radical scavenging activity of the biocomposites increased to roughly 50% antioxidant potential/cm², for the biocomposite containing 40 wt % lignin. The results demonstrate the potential of lignin as a component in biocomposite materials, which we show are adequate for 3D printing operations.

Electrochemical Aminoxyl-Mediated Oxidation of Primary Alcohols in Lignin to Carboxylic Acids: Polymer Modification and Depolymerization

An electrochemical process has been developed for chemoselective oxidation of primary alcohols in lignin to the corresponding carboxylic acids. The electrochemical oxidation reactions proceed under mildly basic conditions and employ 2,2,6,6-tetramethyl-1-piperidine N-oxyl (TEMPO) and 4-acetamido-TEMPO (ACT) as catalytic mediators. Lignin model compounds and related alcohols are used to conduct structure-reactivity studies that provide insights into the origin of the reaction selectivity. The method is applied to the oxidation of lignin extracted from poplar wood chips via a mild acidolysis method, and the reaction affords a novel polyelectrolyte material. Gel permeation chromatography data for the oxidized lignin shows that this material has a molecular weight and molecular weight distribution very similar to that of the extracted lignin, but notable differences are also evident. Base titration reveals a significant increase in the acid content, and the oxidized lignin has much higher water solubility relative to the extracted lignin. Treatment of the oxidized lignin under acidic conditions results in depolymerization of the material into characterized aromatic monomers in nearly 30 wt% yield.

Enhanced Selective Production of Carbonyl Products for Aerobic Oxidation of Benzylic Alcohols over Mesoporous Fe2O3 Supported Gold Nanoparticles

Ordered mesoporous Fe2O3 supported gold nanoparticles with a desired specific surface area and porous structure (Au/meso-Fe2O3) was successfully fabricated with a hard templating method by using KIT-6 as the template. The morphology and physico-chemical properties of Au/meso-Fe2O3 were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM) and transmission electron microscope (TEM), etc. The gold nanoparticles are highly dispersed on the surface of the mesoporous Fe2O3. The catalytic performance of the synthesized catalyst was studied for the aerobic oxidation of benzylic alcohols in β–O–4 linked lignin model dimers to the corresponding carbonyl products under atmosphere pressure. Au/meso-Fe2O3 shows an enhanced activity for the aerobic oxidation of 1-phenylethanol in comparison with that of Au/bulk-Fe2O3. The promoted catalytic activity is related to the confined porous structure of mesoporous Fe2O3 and more boundaries contact between gold and meso-Fe2O3, which shows that the porous structure of the support has a significant influence on the activity of gold catalysts.

New sight on the lignin torrefaction pretreatment: Relevance between the evolution of chemical structure and the properties of torrefied gaseous, liquid, and solid products

In order to reveal the deoxygenation mechanism of lignin torrefaction, the relevance between evolution of chemical structure of torrefied lignin and the properties of torrefied gaseous, liquid, and solid products was established in this study. Results showed that the contents of oxygen element, βO4 linkages, oxygen-containing functional groups (aliphatic OH, aliphatic COOH, aromatic OCH₃) in lignin decreased with the increase of the torrefaction temperature from 210 to 300 °C. The oxygen removal efficiency of lignin torrefaction reached the maximum value of 25.53% at 300 °C. The removed oxygen in the torrefied lignin was transferred into the torrefied gaseous product (e.g. CO₂, H₂O, and CO) and torrefied liquid product (e.g. G-type and P-type phenols, acids). Among the torrefied gaseous products, CO₂ was the dominant oxygen carrier, followed by CO and H₂O. Among the torrefied liquid products, G-type phenols were the dominant oxygen carrier, followed by P-type phenols and acids.

Catalytic depolymerization of lignin over cesium exchanged and transition-metal substituted heterogeneous polyoxometalates

It is of great importance to develop new pathways for low-cost, high-selectivity conversion of lignin into aromatics. In this work, a series of cesium exchanged and transition-metal substituted heterogeneous polyoxometalates were prepared and applied as efficient catalysts for lignin depolymerization. The catalytic oxidation of lignin has been monitored by GPC, 2D NMR HSQC, and GC/MS technologies, and the reaction pathway was also confirmed by the examination with a dimeric β-O-4 lignin model compound. Under optimal conditions, these catalysts showed high activity toward oxidative cleavage of β-O-4 linkages, as well as β-5 and β-β CC linkages. In particular, the Co substituted polyoxometalates gave high yield of ca. 9.58% monomeric products at 150°C within 3h under an oxygen atmosphere. Results demonstrated the catalyst was easily separated from products and could be repeatedly used at least five cycles without significant loss of activity. Further, the possible reaction mechanism was proposed by a two-step oxygen-based electron transfer and oxygen transfer reaction mechanism. The design and application of the multifunctional POMs based heterogeneous catalytic system make this strategy of great interest in the production of aromatic products from lignin and inspire a new insight to utilize the entire lignocellulosic biomass.

Chemical and thermal analysis of lignin streams from Robinia pseudoacacia L. generated during organosolv and acid hydrolysis pre-treatments and subsequent enzymatic hydrolysis

Lignin streams produced in biorefineries are commonly used to obtain energy. In order to increase the competitiveness of this industry, new lignin valorization routes are necessary, for which a depth characterization of this biological macromolecule is essential. In this context, this study analyzed lignin streams of Robinia pseudoacacia L. generated during organosolv and acid hydrolysis pre-treatments and during the subsequent enzymatic hydrolysis. These lignins included dissolved lignins from pre-treatment liquors and saccharification lignins from pre-treated materials. Chemical composition and structural features were analyzed by analytical standard methods and Fourier Transform Infrared spectroscopy (FTIR), size exclusion chromatography (SEC), ¹³C solid state nuclear magnetic resonance (¹³C NMR) and ¹H-¹³C two-dimensional nuclear magnetic resonance (2D NMR); while thermal characterization included thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). In general, all studied lignins contained a predominance of β-O-4' aryl ether linkages, followed by resinol (β-β') and phenylcoumaran (β-5'), with a predominance of syringyl over guaiacyl and hydroxyphenyl units. Nevertheless, the dissolved lignins revealed a removal of linkages, especially β-O-4', leading to an enrichment of phenolic groups. Moreover, high thermal stability and good thermoplasticity were characteristics of these lignins. Contrary, the saccharification lignins exhibited a more intact structure, but with an important remaining carbohydrates content.

Sequential utilization of bamboo biomass through reductive catalytic fractionation of lignin

Reductive catalytic fractionation (RCF) has emerged as a new biorefinery paradigm for the fractionation and sequential utilization of entire components of biomass. Herein, we investigated the RCF of bamboo, a highly abundant herbaceous feedstock, in the presence of Pd/C catalyst. The lignin fraction in bamboo was preferentially depolymerized into well-defined low-molecular-weight phenols, with leaving carbohydrates pulp as a solid residue. In the soluble fraction, four major phenolic compounds, e.g., methyl coumarate/ferulate derived from hydroxycinnamic units and propanol guaiacol/syringol derived from β-O-4 units, were generated up to 41.7 wt% yield based on original lignin content. In the insoluble fraction, the carbohydrates of bamboo were recovered with high retentions of cellulose (68%) and hemicellulose (49%), which upon treatment with enzyme gave glucose (90%) and xylose (85%). Overall, the three major components of bamboo could efficient to be fractionated and converted into useful platform chemicals on the basis of this study.

Conversion of depolymerized sugars and aromatics from engineered feedstocks by two oleaginous red yeasts

One of the requirements for efficient biological conversion of lignocellulose to bioproducts is the compatibility of biological catalysts with the processes employed to solubilize and depolymerize the lignocellulosic components. The red yeasts Rhodosporidium toruloides and Rhodotorula mucilaginosa were evaluated for their ability to assimilate sugars and aromatic compounds extracted from two engineered lines of Arabidopsis thaliana with modified lignin or the wild-type using ionic liquid, acid or alkaline pretreatments. Differential amounts of monomeric sugars, organic acids and, in the case of the engineered lines, either 4-hydroxybenzoic or protocatechuic acid were additionally released from the biomass and found to be tolerated and consumed by both microorganisms. Genetically-engineered strains of the two red yeasts successfully converted the depolymerized products into the biofuel precursor bisabolene when cultivated on hydrolysates or synthetic media containing specific sugars, acids and aromatics found in the hydrolysates.

Selective molecular separation of lignin model compounds by reduced graphene oxide membranes from solvent-water mixture

Selective separation of lignin depolymerization products is key to fractionating and isolating high-value aromatic compounds from the depolymerization process. The primary aim of this study was to synthesis graphene oxide (GO) membranes for selective separations of lignin oligomeric units from polar organic solvent-water media. GO membranes were synthesized on a polymeric substrate by a shear assisted casting of aqueous GO dispersion using a wire-wound rod. Deposited GO was then reduced to different extents by controlled thermal incubation, and the impact on membrane performance was investigated. The extent of reduction of GO was established by extensive characterization with FTIR, XPS, Raman Spectroscopy, XRD, and contact angle measurements. Impressive performance with the rejection of over 70% for the model compound trimer BMP (2,6-bis[(2-hydroxy-5-methyl phenyl) methyl]-4-methylphenol) was achieved compared to only 20% rejection for the dimer GGE (guaiacylglycerol-β-guaiacylether) with isopropanol-water (90-10% by volume) as a solvent. This corresponds to an encouraging selective separation with selective permeation of dimer (GGE) 3.5 times higher compared to trimer (BMP). rGO membranes exhibited a stable performance over 84 h of operation at a shear rate of 1.1 Pa in a cross-flow mode of operation. Selective separation of GO can be effectively modulated by controlling the O/C ratio by the extent of reduction of GO; indeed, the retention of trimeric compounds increased with increasing GO reduction. The remarkable performance of GO membranes could enable energy-efficient fractionation of lignin oligomeric compounds from polar organic solvents.

Lignin Engineering in Forest Trees

Wood is a renewable resource that is mainly composed of lignin and cell wall polysaccharides. The polysaccharide fraction is valuable as it can be converted into pulp and paper, or into fermentable sugars. On the other hand, the lignin fraction is increasingly being considered a valuable source of aromatic building blocks for the chemical industry. The presence of lignin in wood is one of the major recalcitrance factors in woody biomass processing, necessitating the need for harsh chemical treatments to degrade and extract it prior to the valorization of the cell wall polysaccharides, cellulose and hemicellulose. Over the past years, large research efforts have been devoted to engineering lignin amount and composition to reduce biomass recalcitrance toward chemical processing. We review the efforts made in forest trees, and compare results from greenhouse and field trials. Furthermore, we address the value and potential of CRISPR-based gene editing in lignin engineering and its integration in tree breeding programs.

Transition-metal free oxidative C-H etherification of acylanilines with alcohols through a radical pathway

A transition metal free approach for the synthesis of methyl/ethyl aryl ether via oxidative C-H etherification of acylanilines with alcohols has been developed. Various acylanilines are compatible under standard conditions, giving the corresponding products in moderate to good yields. This strategy avoids transition-metal catalyst and excessive alcohol, providing a simple and reliable alternative method for the synthesis of methyl/ethyl aryl ether. Control experiments reveal that a radical mechanism is involved in this transformation.

Lignin Biopolymers in the Age of Controlled Polymerization

Polymers made from natural biomass are gaining interest due to the rising environmental concerns and depletion of petrochemical resources. Lignin isolated from lignocellulosic biomass is the second most abundant natural polymer next to cellulose. The paper pulp process produces industrial lignin as a byproduct that is mostly used for energy and has less significant utility in materials applications. High abundance, rich chemical functionalities, CO2 neutrality, reinforcing properties, antioxidant and UV blocking abilities, as well as environmental friendliness, make lignin an interesting substrate for materials and chemical development. However, poor processability, low reactivity, and intrinsic structural heterogeneity limit lignins' polymeric applications in high-performance advanced materials. With the advent of controlled polymerization methods such as ATRP, RAFT, and ADMET, there has been a great interest in academia and industry to make value-added polymeric materials from lignin. This review focuses on recent investigations that utilize controlled polymerization methods to generate novel lignin-based polymeric materials. Polymers developed from lignin-based monomers, various polymer grafting technologies, copolymer properties, and their applications are discussed.

Internalization and accumulation of model lignin breakdown products in bacteria and fungi

BACKGROUND

Valorization of lignin has the potential to significantly improve the economics of lignocellulosic biorefineries. However, its complex structure makes conversion to useful products elusive. One promising approach is depolymerization of lignin and subsequent bioconversion of breakdown products into value-added compounds. Optimizing transport of these depolymerization products into one or more organism(s) for biological conversion is important to maximize carbon utilization and minimize toxicity. Current methods assess internalization of depolymerization products indirectly-for example, growth on, or toxicity of, a substrate. Furthermore, no method has been shown to provide visualization of depolymerization products in individual cells.

RESULTS

We applied mass spectrometry to provide direct measurements of relative internalized concentrations of several lignin depolymerization compounds and single-cell microscopy methods to visualize cell-to-cell differences in internalized amounts of two lignin depolymerization compounds. We characterized internalization of 4-hydroxybenzoic acid, vanillic acid, p-coumaric acid, syringic acid, and the model dimer guaiacylglycerol-beta-guaiacyl ether (GGE) in the lignolytic organisms Phanerochaete chrysosporium and Enterobacter lignolyticus and in the non-lignolytic but genetically tractable organisms Saccharomyces cerevisiae and Escherichia coli. The results show varying degrees of internalization in all organisms for all the tested compounds, including the model dimer, GGE. Phanerochaete chrysosporium internalizes all compounds in non-lignolytic and lignolytic conditions at comparable levels, indicating that the transporters for these compounds are not specific to the lignolytic secondary metabolic system. Single-cell microscopy shows that internalization of vanillic acid and 4-hydroxybenzoic acid analogs varies greatly among individual fungal and bacterial cells in a given population. Glucose starvation and chemical inhibition of ATP hydrolysis during internalization significantly reduced the internalized amount of vanillic acid in bacteria.

CONCLUSIONS

Mass spectrometry and single-cell microscopy methods were developed to establish a toolset for providing direct measurement and visualization of relative internal concentrations of mono- and di-aryl compounds in microbes. Utilizing these methods, we observed broad variation in intracellular concentration between organisms and within populations and this may have important consequences for the efficiency and productivity of an industrial process for bioconversion. Subsequent application of this toolset will be useful in identifying and characterizing specific transporters for lignin-derived mono- and di-aryl compounds.