Shape-controlled synthesis of metal nanocrystals: simple chemistry meets complex physics?

Ultrathin covalent organic overlayers on metal nanocrystals for highly selective plasmonic photocatalysis

Metal nanoparticle-organic interfaces are common but remain elusive for controlling reactions due to the complex interactions of randomly formed ligand-layers. This paper presents an approach for enhancing the selectivity of catalytic reactions by constructing a skin-like few-nanometre ultrathin crystalline porous covalent organic overlayer on a plasmonic nanoparticle surface. This organic overlayer features a highly ordered layout of pore openings that facilitates molecule entry without any surface poisoning effects and simultaneously endows favourable electronic effects to control molecular adsorption-desorption. Conformal organic overlayers are synthesised through the plasmonic oxidative activation and intermolecular covalent crosslinking of molecular units. We develop a light-operated multicomponent interfaced plasmonic catalytic platform comprising Pd-modified gold nanoparticles inside hollow silica to achieve the highly efficient and selective semihydrogenation of alkynes. This approach demonstrates a way to control molecular adsorption behaviours on metal surfaces, breaking the linear scaling relationship and simultaneously enhancing activity and selectivity.

Parallel Nanosheet Arrays for Industrial Oxygen Production

According to the traditional nucleation theory, crystals in solution nucleate under thermal fluctuations with random crystal orientation. Thus, nanosheet arrays grown on a substrate always exhibit disordered arrangements, which impede mass transfer during catalysis. To overcome this limitation, here, we demonstrate stress-induced, oriented nucleation and growth of nanosheet arrays. A regularly self-growing parallel nanosheet array is realized on a curved growth substrate. During electrochemical oxygen production, the ordered array maintains a steady flow of liquids in the microchannels, suppressing the detrimental production of flow-blocking oxygen bubbles typical of randomly oriented nanosheet arrays. Controllable parallel arrays, fully covered fluffy-like ultrathin nanosheets, and amorphous disordered structures altogether enable full-scale design of hierarchical interfaces from the micro- to the atomic scale, significantly improving the otherwise sluggish kinetics of oxygen evolution toward industrial ultrafast production. Record-high ultrafast oxygen production of 135 L·min-1·m-2 with high working current of 4000 mA·cm-2 is steadily achieved at a competitively low cell voltage of 2.862 V. These results and related insights lay the basis for further developments in oriented nucleation and growth of crystals beyond classical nucleation approaches, with benefits for large-scale, industrial electrochemical processes as shown here for ultrafast oxygen production.

Precise solid-phase synthesis of CoFe@FeOx nanoparticles for efficient polysulfide regulation in lithium/sodium-sulfur batteries

Complex metal nanoparticles distributed uniformly on supports demonstrate distinctive physicochemical properties and thus attract a wide attention for applications. The commonly used wet chemistry methods display limitations to achieve the nanoparticle structure design and uniform dispersion simultaneously. Solid-phase synthesis serves as an interesting strategy which can achieve the fabrication of complex metal nanoparticles on supports. Herein, the solid-phase synthesis strategy is developed to precisely synthesize uniformly distributed CoFe@FeOx core@shell nanoparticles. Fe atoms are preferentially exsolved from CoFe alloy bulk to the surface and then be carburized into a FexC shell under thermal syngas atmosphere, subsequently the formed FexC shell is passivated by air, obtaining CoFe@FeOx with a CoFe alloy core and a FeOx shell. This strategy is universal for the synthesis of MFe@FeOx (M = Co, Ni, Mn). The CoFe@FeOx exhibits bifunctional effect on regulating polysulfides as the separator coating layer for Li-S and Na-S batteries. This method could be developed into solid-phase synthetic systems to construct well distributed complex metal nanoparticles.

Synthesis of Silver Nanoparticles From Cymodocea rotundata Leaf Extract and Their Biological Activities

AIM

Silver nanoparticles (AgNPs) are considered to be a very significant and intriguing type within the category of metallic nanoparticles, particularly in the context of their involvement in biological applications. The objective of this research is to use the green synthesis method in order to synthesize AgNPs by using the leaf extract of C. rotundata. Furthermore, the study aims to evaluate the antioxidant and anti-inflammatory properties of these nanoparticles.

MATERIALS AND METHODS

Fresh and healthy specimens of C. rotundata were gathered from Palk Bay, Tamil Nadu, India, and afterward subjected to a thorough washing process using tap water. The cleaned materials were air-dried and then fragmented into small bits and finely ground. The ethanolic extract of seagrass was then combined with a solution containing 1 millimolar (mM) silver nitrate (AgNo3). The decrease of silver ions in the solution was frequently measured using a UV-visible spectrophotometer. Synthesized AgNPs were investigated for antioxidants by DPPH (2,2-diphenyl-1-picrylhydrazyl) assay and anti-inflammatory activity was measured by protein-denaturation assay.

RESULTS

The use of C. rotundata leaf extract in the green synthesis of AgNPs, in the presence of 1 mM AgNO3, led to a noticeable alteration in the colour of the mixture, transitioning from a pale hue to a brown shade. This change in colour serves as evidence of the reduction of AgNo3 ions to silver ions, thereby facilitating the creation of AgNPs. The duration of the bio-reduction process of silver ions in the reaction mixture was observed to be two hours. The antioxidant and anti-inflammatory activity showed promising activity for AgNPs.

CONCLUSION

This study concluded that C. rotundata had antioxidant capabilities, and AgNPs derived from C. rotundata have potential use in pharmaceuticals and medication administration.

Recent Advances of Seed-Mediated Growth of Metal Nanoparticles: from Growth to Applications

Unprecedented advances in metal nanoparticle synthesis have paved the way for broad applications in sensing, imaging, catalysis, diagnosis, and therapy by tuning the optical properties, enhancing catalytic performance, and improving chemical and biological properties of metal nanoparticles. The central guiding concept for regulating the size and morphology of metal nanoparticles is identified as the precise manipulation of nucleation and subsequent growth, often known as seed-mediated growth methods. However, since the growth process is sensitive not only to the metal seeds but also to capping agents, metal precursors, growth solution, growth/incubation time, reductants, and other influencing factors, the precise control of metal nanoparticle morphology is multifactorial. Further, multiple reaction parameters are entangled with each other, so it is necessary to clarify the mechanism by which each factor precisely regulates the morphology of metal nanoparticles. In this review, to exploit the generality and extendibility of metal nanoparticle synthesis, the mechanisms of growth influencing factors in seed-mediated growth methods are systematically summarized. Second, a variety of critical properties and applications enabled by grown metal nanoparticles are focused upon. Finally, the current progress and offer insights on the challenges, opportunities, and future directions for the growth and applications of grown metal nanoparticles are reviewed.

Depletion force optimization for high-purity gold nanotriangles prepared using different growth methods

A homogeneous structural distribution in metal nanoparticle is commonly required for their application, and despite high-yield growth techniques, unavoidable structural heterogeneity remains a concern in metal nanoparticle synthesis. Gold nanotriangles (AuNTs) were synthesized using seed-mediated and seedless growth methods. Recent advancements in high-yield synthesis processes have enabled easy handling of AuNTs, which exhibit unique localized surface plasmon resonance characteristics due to their anisotropic triangular form. The flocculation and subsequent precipitation technique was used to purify AuNTs of different sizes synthesized using seed-mediated and seedless growth methods. The optimal conditions for obtaining high-purity AuNTs were explored by introducing a high concentration of cetyltrimethylammonium chloride. Additionally, the depletion force necessary for achieving high-purity AuNTs was calculated to reveal variations in the required depletion forces for AuNTs synthesized using different growth techniques. The alternations in the size distribution of AuNTs during the flocculation step were tracked using dynamic light scattering, and the surface charge of AuNTs synthesized through different growth methods was evaluated by ζ-potential. The high purity of the AuNTs produced using the seedless growth method required a larger depletion force than the seed-mediated grown AuNTs. The difference in the required depletion forces results from the difference in the electrostatic forces caused by the different growth methods.

Gaussian attractive potential for carboxylate/cobalt surface interactions

Ligand-decorated metal surfaces play a pivotal role in various areas of chemistry, particularly in selective catalysis. Molecular dynamics simulations at the molecular mechanics level of theory are best adapted to gain complementary insights to experiments regarding the structure and dynamics of such organic films. However, standard force fields tend to capture only weak physisorption interactions. This is inadequate for ligands that are strongly adsorbed such as carboxylates on metal surfaces. To address this limitation, we employ the Gaussian Lennard-Jones (GLJ) potential, which incorporates an attractive Gaussian potential between the surface and ligand atoms. Here, we develop this approach for the interaction between cobalt surfaces and carboxylate ligands. The accuracy of the GLJ approach is validated through the analysis of the interaction of oxygen with two distinct cobalt surfaces. The accuracy of this method reaches a root mean square deviation (RMSD) of about 3 kcal/mol across all probed configurations, which corresponds to a percentage error of roughly 4%. Application of the GLJ force field to the dynamics of the organic layer on these surfaces reveals how the ligand concentration influences the film order, and highlights differing mobility in the x and y directions, attributable to surface corrugation on Co(112̄0). GLJ is versatile, suitable for a broad range of metal/ligand systems, and can, subsequently, be utilized to study the organic film on the adsorption/desorption of reactants and products during a catalytic process.

Selective Formation of Monodisperse Right Trigonal-Bipyramidal and Cube-Shaped CdSe Nanocrystals: Stacking Faults and Facet-Ligand Pairing

Formation of monodisperse right trigonal-bipyramidal (rTriBP) and cube-shaped CdSe nanocrystals─both being encased with six (100) facets─is found to be dictated by type of stacking faults along the (111) direction of the zinc-blende structure and an ideal facet-ligand pairing for the (100) facets. During growth with little kinetic overdriving, seeds with single twin boundary (TB) and single intrinsic stacking fault (ISF) grow into rTriBP and cube-shaped nanocrystals, respectively, through two consecutive stages. During the facet-formation stage, each seed would grow rapidly into the smallest faceted one to contain the ∼3 nm seed, with cube-shaped ones growing much faster than rTriBP ones because of the stacking-fault-dependent seed location in the final faceted nanocrystals. In the following facet-growth stage, cube-shaped nanocrystals also grow faster, presumably due to the highly reactive stacking fault edges. Consistent with this hypothesis, growth of rTriBP nanocrystals can become faster than that of cube-shaped ones by intentionally introducing additional intrinsic stacking fault(s) in the seeds. Cube-shaped and rTriBP CdSe nanocrystals exhibit distinctive optical properties, representing two classes of optical materials.

Three-dimensional building of anisotropic gold nanoparticles under confinement in submicron capsules

The low collision rate and contact time of gold nanoparticles (NPs) in solution afford a low welding probability, which hinders their welding structure, orientation, and dimension. Encapsulated anisotropic NPs, gold nanotriangles (AuNTs), were successfully assembled into a three-dimensional structure inside a permeable silica nanocapsule under light illumination to generate localized surface plasmon resonance (LSPR). AuNTs were trapped in the permeable silica nanocapsules and diffused in the nanospace because of copolymer release, which increased the contact probability of AuNTs and promoted the three-dimensional building of AuNTs. Electron energy loss mapping simulations revealed that the obtained three-dimensional AuNT structure exhibited spatially separated multiple LSPR modes with different energies of incident light, which are photophysically attractive beyond the facet-selective chemical growth of NPs, and postmodification for anchoring substances with site-selective attachment to the obtained structure will be applicable to expand the sensing design and class of substances for sensing.

Apparent symmetry rising induced by crystallization inhibition in ternary co-crystallization-driven self-assembly

The concept of apparent symmetry rising, opposite to symmetry breaking, was proposed to illustrate the unusual phenomenon that the symmetry of the apparent morphology of the multiply twinned particle is higher than that of its crystal structure. We developed a unique strategy of co-crystallization-driven self-assembly of amphiphilic block copolymers PEO-b-PS and the inorganic cluster silicotungstic acid to achieve apparent symmetry rising of nanoparticles under mild conditions. The triangular nanoplates triply twinned by orthogonal crystals (low symmetry) have an additional triple symmetry (high symmetry). The appropriate crystallization inhibition of short solvophilic segments of the block copolymers favors the oriented attachment of homogeneous domains of hybrid nanoribbons, and consequently forms kinetic-controlled triangular nanoplates with twin grain boundaries.

The Rise of Structurally Anisotropic Plasmonic Janus Gold Nanostars

Nanostructures intrinsically possessing two different structural or functional features, often called Janus nanoparticles, are emerging as a potential material for sensing, catalysis, and biomedical applications. Herein, we report the synthesis of plasmonic gold Janus nanostars (NSs) possessing a smooth concave pentagonal morphology with sharp tips and edges on one side and, contrastingly, a crumbled morphology on the other. The methodology reported herein for their synthesis - a single-step growth reaction - is different from any other Janus nanoparticle preparation involving either template-assisted growth or a masking technique. Interestingly, the coexistence of lower- and higher-index facets was found in these Janus NSs. The general paradigm for synthesizing gold Janus NSs was investigated by understanding the kinetic control mechanism with the combinatorial effect of all the reagents responsible for the structure. The optical properties of the Janus NSs were realized by corelating their extinction spectra with the simulated data. The size-dependent surface-enhanced Raman scattering (SERS) activity of these Janus NSs was studied with 1,4-BDT as the model analyte. Finite-difference time-domain simulations for differently sized particles revealed the distribution of electromagnetic hot-spots over the particles resulting in enhancement of the SERS signal in a size-dependent manner.

Superhydrophobic Surface Modification of Polymer Microneedles Enables Fabrication of Multimodal Surface-Enhanced Raman Spectroscopy and Mass Spectrometry Substrates for Synthetic Drug Detection in Blood Plasma

Microneedles are widely used substrates for various chemical and biological sensing applications utilizing surface-enhanced Raman spectroscopy (SERS), which is indeed a highly sensitive and specific analytical approach. This article reports the fabrication of a nanoparticle (NP)-decorated microneedle substrate that is both a SERS substrate and a substrate-supported electrospray ionization (ssESI) mass spectrometry (MS) sample ionization platform. Polymeric ligand-functionalized gold nanorods (Au NRs) are adsorbed onto superhydrophobic surface-modified polydimethylsiloxane (PDMS) microneedles through the control of various interfacial interactions. We show that the chain length of the polymer ligands dictates the NR adsorption process. Importantly, assembling Au NRs onto the micrometer-diameter needle tips allows the formation of highly concentrated electromagnetic hot spots, which provide the SERS enhancement factor as high as 1.0 × 106. The micrometer-sized area of the microneedle top and high electromagnetic field enhancement of our system can be loosely compared with tip-enhanced Raman spectroscopy, where the apex of a plasmonic NP-functionalized sharp probe produces high-intensity plasmonic hot spots. Utilizing our NR-decorated microneedle substrates, the synthetic drugs fentanyl and alprazolam are analyzed with a subpicomolar limit of detection. Further analysis of drug-molecule interactions on the NR surface utilizing the Langmuir adsorption model suggests that the higher polarizability of fentanyl allows for a stronger interaction with hydrophilic polymer layers on the NR surface. We further demonstrate the translational aspect of the microneedle substrate for both SERS- and ssESI-MS-based detection of these two potent drugs in 10 drug-of-abuse (DOA) patient plasma samples with minimal preanalysis sample preparation steps. Chemometric analysis for the SERS-based detection shows a very good classification between fentanyl, alprazolam, or a mixture thereof in our selected 10 samples. Most importantly, ssESI-MS analysis also successfully identifies fentanyl or alprazolam in these same 10 DOA plasma samples. We believe that our multimodal detection approach presented herein is a highly versatile detection technology that can be applicable to the detection of any analyte type without performing any complicated sample preparation.

Synthesis of multifunctional amorphous metallic shell on crystalline metallic nanoparticles

Colloidal nanoparticles can be coated with a conformal shell to form multifunctional nanoparticles. For instance, plasmonic, magnetic, and catalytic properties, chemical stability and biocompatibility can be mixed and matched. Here, a facile synthesis for depositing metal boride amorphous coatings on colloidal metallic nanocrystals is introduced. The synthesis is independent of core size, shape, and composition. We have found that the shell synthesis is limited to nanoparticles capped with short molecular weight and low binding energy ligands, and does not work with polyvinylpyrrolidone (PVP)-coated Ag nanoparticles or thiol-coated Au nanoparticles. Shell thickness can be as thin as 3 nm with no apparent pinholes. High pressure studies show that the coatings are highly resistant to crystallization and are strongly bonded to the crystalline core. By choosing either CoB or NiB for the coating, the composite nanoparticles can be either ferromagnetic or paramagnetic at room temperature, respectively.

Minimum Free-Energy Shapes of Ag Nanocrystals: Vacuum vs Solution

We use two variants of replica-exchange molecular dynamics (MD) simulations, parallel tempering MD and partial replica exchange MD, to probe the minimum free-energy shapes of Ag nanocrystals containing 100-200 atoms in a vacuum, ethylene glycol (EG) solvent, and EG solvent with a PVP polymer containing 100 repeat units. Our simulations reveal a shape intermediate between a Dh and an Ih, a Dh-Ih, that has distinct structural signatures and magic sizes. We find several prominent features associated with entropy: pure FCC nanocrystals are less common than FCC crystals containing stacking faults, and crystals with the minimum potential energy are not always preferred over the range of relevant temperatures. The shapes of the nanocrystals in solution are influenced by the chemical identities of the solution-phase molecules. Comparing Ag nanocrystal shapes in EG to those in an EG+PVP solution, we find more icosahedra in EG and more decahedra in EG+PVP across all of the nanocrystal sizes probed in this study. At certain critical sizes, nanocrystal shapes can change dramatically with the addition and removal of a single atom or with a change in temperature at a fixed size. The information in our study could be useful in efforts to devise processing routes to achieve selective nanocrystal shapes.

Recent advances in nanoflowers: compositional and structural diversification for potential applications

In recent years, nanoscience and nanotechnology have emerged as promising fields in materials science. Spectroscopic techniques like scanning tunneling microscopy and atomic force microscopy have revolutionized the characterization, manipulation, and size control of nanomaterials, enabling the creation of diverse materials such as fullerenes, graphene, nanotubes, nanofibers, nanorods, nanowires, nanoparticles, nanocones, and nanosheets. Among these nanomaterials, there has been considerable interest in flower-shaped hierarchical 3D nanostructures, known as nanoflowers. These structures offer advantages like a higher surface-to-volume ratio compared to spherical nanoparticles, cost-effectiveness, and environmentally friendly preparation methods. Researchers have explored various applications of 3D nanostructures with unique morphologies derived from different nanoflowers. The nanoflowers are classified as organic, inorganic and hybrid, and the hybrids are a combination thereof, and most research studies of the nanoflowers have been focused on biomedical applications. Intriguingly, among them, inorganic nanoflowers have been studied extensively in various areas, such as electro, photo, and chemical catalysis, sensors, supercapacitors, and batteries, owing to their high catalytic efficiency and optical characteristics, which arise from their composition, crystal structure, and local surface plasmon resonance (LSPR). Despite the significant interest in inorganic nanoflowers, comprehensive reviews on this topic have been scarce until now. This is the first review focusing on inorganic nanoflowers for applications in electro, photo, and chemical catalysts, sensors, supercapacitors, and batteries. Since the early 2000s, more than 350 papers have been published on this topic with many ongoing research projects. This review categorizes the reported inorganic nanoflowers into four groups based on their composition and structure: metal, metal oxide, alloy, and other nanoflowers, including silica, metal-metal oxide, core-shell, doped, coated, nitride, sulfide, phosphide, selenide, and telluride nanoflowers. The review thoroughly discusses the preparation methods, conditions for morphology and size control, mechanisms, characteristics, and potential applications of these nanoflowers, aiming to facilitate future research and promote highly effective and synergistic applications in various fields.

Partial Chemicalization of Nanoscale Metals: An Intra-Material Transformative Approach for the Synthesis of Functional Colloidal Metal-Semiconductor Nanoheterostructures

Heterostructuring colloidal nanocrystals into multicomponent modular constructs, where domains of distinct metal and semiconductor phases are interconnected through bonding interfaces, is a consolidated approach to advanced breeds of solution-processable hybrid nanomaterials capable of expressing richly tunable and even entirely novel physical-chemical properties and functionalities. To meet the challenges posed by the wet-chemical synthesis of metal-semiconductor nanoheterostructures and to overcome some intrinsic limitations of available protocols, innovative transformative routes, based on the paradigm of partial chemicalization, have recently been devised within the framework of the standard seeded-growth scheme. These techniques involve regiospecific replacement reactions on preformed nanocrystal substrates, thus holding great synthetic potential for programmable configurational diversification. This review article illustrates achievements so far made in the elaboration of metal-semiconductor nanoheterostructures with tailored arrangements of their component modules by means of conversion pathways that leverage on spatially controlled partial chemicalization of mono- and bi-metallic seeds. The advantages and limitations of these approaches are discussed within the context of the most plausible mechanisms underlying the evolution of the nanoheterostructures in liquid media. Representative physical-chemical properties and applications of chemicalization-derived metal-semiconductor nanoheterostructures are emphasized. Finally, prospects for developments in the field are outlined.

Green Synthesis of Antimicrobial Peptide-Protected Silver Nanoclusters with Regulated Antibacterial Behavior

The antibacterial system based on the silver element has been a very promising antibacterial material. However, the antibacterial activity of silver nanomaterials largely depends on their chemical composition and physical properties. Herein, we prepared ultrasmall silver nanoclusters by directly reducing silver ions with antimicrobial peptide in a green way. The positively charged peptide ligands drove the silver nanoclusters binding to bacteria by electrostatic attraction. Contrary to the large-sized silver nanomaterials, the ultrasmall silver nanoclusters were able to rapidly penetrate bacteria membranes via strong hydrophobic association, significantly promoting the generation of reactive oxygen species, and the subsequent high oxidative stress led to bacterial death. Moreover, the silver nanoclusters with antibacterial peptide ligand exhibited good stability, low cytotoxicity, and long-term antibacterial activity. Besides, synergistic enhancement of silver nanoclusters on antibacterial activity was observed. Therefore, the silver nanoclusters conjugated with the antimicrobial peptide can act as a synergistic antibacterial agent, in which their bio-interactions with bacteria have been regulated to achieve a rapid, long-lasting, and broad-spectrum antibacterial effect.

Peroxidase mimics of platinum-group metals for in vitro diagnostics: opportunities and challenges

Platinum-group metal (PGM) nanostructures with peroxidase-like catalytic activities (i.e., peroxidase mimics) have been actively developed and applied to in vitro diagnostics in recent years. This article provides our viewpoints on this emerging field from the perspectives of materials science and solid-state chemistry angles. We start with an introduction to PGM peroxidase mimics, their catalytic efficiencies, and insights into catalysis from computational simulations. We then discuss chemical approaches to the synthesis of PGM peroxidase mimics with desired physicochemical parameters and catalytic properties. Then, we elaborate on general methods for functionalizing the surfaces of PGM mimics with bioreceptors. Thereafter, we highlight the applications of PGM mimics in in vitro diagnostics, emphasizing the interactions of PGM mimics with other components of a diagnostic system. We conclude this article with our opinions on the challenges and opportunities in this field.

Oxygen Plasma Induced Nanochannels for Creating Bimetallic Hollow Nanocrystals

Platinum-based metal catalysts are considered excellent converters in various catalytic reactions, particularly in fuel cell applications. The atomic structure at the nanocrystal surface and the metal interface both influence the catalytic performance, controlling the efficiency of the electrochemical reactions. Here we report the synthesis of Ag/Pt and Ag/Pd core/shell nanocrystals and insight into the formation mechanism of these bimetallic core/shell nanocrystals when undergoing oxygen plasma treatment. We carefully designed the oxidation treatment that determines the structural and compositional evolution. The accelerated oxidation-triggered diffusion of Ag toward the outer metal shell leads to the Kirkendall effect. After prolonged oxygen plasma treatment, most core/shell nanocrystals evolve into hollow spheres. At the same time, a minor fraction of the metal remains unchanged with a well-protected Ag core and a monocrystalline Pt or Pd shell. We hypothesize that the O2 plasma disturbs the Pt or Pd shell surface and introduces active O species that react with the diffused Ag from the inside out. Based on EDX elemental mapping, combined with several electron microscopic techniques, we deduced the formation mechanism of the hollow structures to be as follows: (I) the oxidation of Ag within the Pt or Pd lattice causes a disrupted crystal lattice of Pt or Pd; (II) nanochannels arise at the defect locations on the Pt or Pd shell; (III) the remaining Ag atoms pass through these nanochannels and leave a hollow crystal behind. Our findings deepen the understanding of interface dynamics of bimetallic nanostructured catalysts under an oxidative environment and unveil an alternative approach for catalyst pretreatment.

Turing structuring with multiple nanotwins to engineer efficient and stable catalysts for hydrogen evolution reaction

Low-dimensional nanocrystals with controllable defects or strain modifications are newly emerging active electrocatalysts for hydrogen-energy conversion and utilization; however, a crucial challenge remains in insufficient stability due to spontaneous structural degradation and strain relaxation. Here we report a Turing structuring strategy to activate and stabilize superthin metal nanosheets by incorporating high-density nanotwins. Turing configuration, realized by constrained orientation attachment of nanograins, yields intrinsically stable nanotwin network and straining effects, which synergistically reduce the energy barrier of water dissociation and optimize the hydrogen adsorption free energy for hydrogen evolution reaction. Turing PtNiNb nanocatalyst achieves 23.5 and 3.1 times increase in mass activity and stability index, respectively, compared against commercial 20% Pt/C. The Turing PtNiNb-based anion-exchange-membrane water electrolyser with a low Pt mass loading of 0.05 mg cm-2 demonstrates at least 500 h stability at 1000 mA cm-2, disclosing the stable catalysis. Besides, this new paradigm can be extended to Ir/Pd/Ag-based nanocatalysts, illustrating the universality of Turing-type catalysts.

Synthesis of Zwitterionic CsPbBr3 Nanocrystals with Controlled Anisotropy using Surface-Selective Ligand Pairs

Mechanistic studies of the morphology of lead halide perovskite nanocrystals (LHP-NCs) are hampered by a lack of generalizable suitable synthetic strategies and ligand systems. Here, the synthesis of zwitterionic CsPbBr3 NCs is presented with controlled anisotropy using a proposed "surface-selective ligand pairs" strategy. Such a strategy provides a platform to systematically study the binding affinity of capping ligand pairs and the resulting LHP morphologies. By using zwitterionic ligands (ZwL) with varying structures, majority ZwL-capped LHP NCs with controlled morphology are obtained, including anisotropic nanoplatelets and nanorods, for the first time. Combining experiments with density functional theory calculations, factors that govern the ligand binding on the different surface facets of LHP-NCs are revealed, including the steric bulkiness of the ligand, the number of binding sites, and the charge distance between binding moieties. This study provides guidance for the further exploration of anisotropic LHP-NCs.

Deterministic Synthesis of Pd Nanocrystals Enclosed by High-Index Facets and Their Enhanced Activity toward Formic Acid Oxidation

Noble-metal nanocrystals enclosed by high-index facets are of growing interest due to their enhanced catalytic performance in a variety of reactions. Herein, we report the deterministic synthesis of Pd nanocrystals encased by high-index facets by controlling the rate of deposition (Vdeposition) relative to that of surface diffusion (Vdiffusion). For octahedral seeds with truncated corners, a reduction rate (and thus deposition rate) faster than that of surface diffusion (i.e., Vdeposition/Vdiffusion > 1) led to the formation of concave trisoctahedra (TOH) with high-index facets. When the reduction was slowed down, in contrast, surface diffusion dominated the growth pathway. In the case of Vdeposition/Vdiffusion ≈ 1, truncated octahedra with enlarged sizes were produced. When the reduction rate was between these two extremes, we obtained concave tetrahexahedra (THH) without or with truncation. Similar growth patterns were also observed for the cuboctahedral seeds. When the Pd octahedra, concave TOH, and concave THH were tested for electrocatalyzing the formic acid oxidation (FAO) reaction, those with high-index facets were advantageous over the conventional Pd octahedra enclosed by {111} facets. This work not only contributes to the understanding of surface diffusion and its role in nanocrystal growth but also offers a general protocol for the synthesis of nanocrystals enclosed by high-index facets.

Shape Transformation via Etching and Regrowth: A Systematic Study of Pd Nanocrystals with Different Shapes and Twin Structures

This article describes a systematic study of the oxidative etching and regrowth behaviors of Pd nanocrystals, including single-crystal cubes bounded by {100} facets, single-crystal octahedra and tetrahedra enclosed by {111} facets; and multiple-twinned icosahedra covered by {111} facets and twin boundaries. During etching, Pd atoms are preferentially oxidized and removed from the corners regardless of the type of nanocrystal, and the resultant Pd2+ ions are then reduced back to elemental Pd. For cubes and icosahedra, the newly formed Pd atoms are deposited on the {100} facets and twin boundaries, respectively, due to their relatively higher energies. For octahedra and tetrahedra, the Pd atoms self-nucleate in the solution phase, followed by their growth into small particles. We can control the regrowth rate relative to etching rate by varying the concentration of HCl in the reaction solution. As the concentration of HCl is increased, 18-nm Pd cubes are transformed into octahedra of 23, 18, and 13 nm, respectively, in edge length. Due to the absence of regrowth, however, Pd octahedra are transformed into truncated octahedra, cuboctahedra, and spheres with decreasing sizes whereas Pd tetrahedra evolve into truncated tetrahedra and spheres. In contrast, Pd icosahedra with twin boundaries on the surface are converted to asymmetric icosahedra, flower-like icosahedra, and spheres. This work not only advances the understanding of etching and growth behaviors of metal nanocrystals with various shapes and twin structures but also offers an alternative method for controlling their shape and size.

Mechanism of formation of Co-Ru nanoalloys: the key role of Ru in the reduction pathway of Co

The chemical synthesis of alloy nanoparticles requires adequate conditions to enable co-reduction instead of separate reduction of the two metal cations. The mechanism of formation of bimetallic cobalt-ruthenium nanoalloys by reducing metal salts in an alcohol medium was explored to draw general rules to extrapolate to other systems. The relative kinetics of the reduction of both metal cations were studied by UV-visible and in situ Quick-X-ray absorption spectroscopies as well as H2 evolution. The addition of Co(II) ions does not influence the reduction kinetics of Ru(III) but adding Ru(III) to a Co(II) solution promotes the reduction of cobalt cations. Indeed, while CoO is formed when reaching the boiling temperature of the solvent for the monometallic system, a direct reduction of Co is observed at this temperature without formation of the oxide for the bimetallic one. The co-reduction of the metal cations results in the formation of bimetallic nanoplatelets, the size of which can be tuned by changing the Ru content.

Synthesis of novel magnetic pitch-based hypercrosslinked polymers as adsorbents for effective recovery of Ag+ with high selectivity

Silver is an important precious metal with superior ductility, electrical and thermal conductivity, photosensitivity, and antibacterial properties. However, without proper recycling and treatment, silver emissions may pose a threat to the human health and subsistence environment due to their toxicity. Therefore, it is environmentally and economically important to recover Ag from waste electronic equipment and anode slime. Herein, carboxyl functionalized modified magnetic nanoparticles (Fe₃O₄@3-phenylglutaricacid nanoparticles) were designed and prepared to obtain the low-cost magnetic pitch-based HCP adsorbents (MPHCP and P-MPHCP). The novelty of present work is that superior adsorption capacity and magnetic responsiveness of adsorbent can be obtained by a simple one-step Friedel-Crafts reaction with very low-cost raw material. The maximum Ag⁺ adsorption capacity of MPHCP and P-MPHCP were 321 and 353 mg/g, respectively. The adsorption was completed within a short duration of 15 min for MPHCP and P-MPHCP at an initial Ag⁺ concentration of 100 mg/L. Moreover, the most selective is P-MPHCP wherein Ag⁺ is α = 61 times more selective than Pb²⁺ at a concentration of 100 mg/L.The adsorption capacity of MPHCP and P-MPHCP towards Ag⁺ still maintains above 89% after ten cycles of adsorption-desorption. This study not only provides new guidance for the development of porous polymeric adsorbents but also provides technical feasibility for the field of recovery and reutilization of precious metals, which has a very extensive practical application prospect.

Chemical and Physical Properties of Photonic Noble-Metal Nanomaterials

Colloidal noble metal nanoparticles (NPs) are composed of metal cores and organic or inorganic ligand shells. These NPs support size- and shape-dependent plasmonic resonances. They can be assembled from dispersions into artificial metamolecules which have collective plasmonic resonances originating from coupled bright and dark optical electric and magnetic modes that form depending on the size and shape of the constituent NPs and their number, arrangement, and interparticle distance. NPs can also be assembled into extended 2D and 3D metamaterials that are glassy thin films or ordered thin films or crystals, also known as superlattices and supercrystals. The metamaterials have tunable optical properties that depend on the size, shape, and composition of the NPs, and on the number of NP layers and their interparticle distance. Interestingly, strong light-matter interactions in superlattices form plasmon polaritons. Tunable interparticle distances allow designer materials with dielectric functions tailorable from that characteristic of an insulator to that of a metal, and serve as strong optical absorbers or scatterers, respectively. In combination with lithography techniques, these extended assemblies can be patterned to create subwavelength NP superstructures and form large-area 2D and 3D metamaterials that manipulate the amplitude, phase, and polarization of transmitted or reflected light.

Electrocatalyst Fabrication Using Metal Nanoparticles Prepared in Ionic Liquids

Metal nanoparticle-based electrocatalysts are widely used in electronic devices, which serve for electrochemical reactions like oxygen reduction reaction, alcohol oxidation and CO2 reduction reaction. These catalyst-dependent reactions are the key of the emerging clean energy systems. Catalyst design and synthesis therefore have received keen attention in past decades. We are motivated to study synthesis approaches of metal nanoparticle-based electrocatalysts using ionic liquids (ILs), which are promising solvents for the nanoparticle preparation because of their unique physicochemical properties. In this personal account, we review our previous and present works on nanoparticle preparation in IL and utilization of the obtained nanoparticles as electrocatalysts.

Controllable Crystallization of Two-Dimensional Bi Nanocrystals with Morphology-Boosted CO2 Electroreduction in Wide pH Environments

Two-dimensional low-melting-point (LMP) metal nanocrystals are attracting increasing attention with broad and irreplaceable applications due to their unique surface and topological structures. However, the chemical synthesis, especially the fine control over the nucleation (reduction) and growth (crystallization), of such LMP metal nanocrystals remains elusive as limited by the challenges of low standard redox potential, low melting point, poor crystalline symmetry, etc. Here, a controllable reduction-melting-crystallization (RMC) protocol to synthesize free-standing and surfactant-free bismuth nanocrystals with tunable dimensions, morphologies, and surface structures is presented. Especially, ultrathin bismuth nanosheets with flat or jagged surfaces/edges can be prepared with high selectivity. The jagged bismuth nanosheets, with abundant surface steps and defects, exhibit boosted electrocatalytic CO2 reduction performances in acidic, neutral, and alkaline aqueous solutions, achieving the maximum selectivity of near unity at the current density of 210 mA cm-2 for formate evolution under ambient conditions. This work creates the RMC pathway for the synthesis of free-standing two-dimensional LMP metal nanomaterials and may find broader applicability in more interdisciplinary applications.

Fabrication of electron tunneling probes for measuring single-protein conductance

Studying the electrical properties of individual proteins is a prominent research area in the field of bioelectronics. Electron tunnelling or quantum mechanical tunnelling (QMT) probes can act as powerful tools for investigating the electrical properties of proteins. However, current fabrication methods for these probes often have limited reproducibility, unreliable contact or inadequate binding of proteins onto the electrodes, so better solutions are required. Here, we detail a generalizable and straightforward set of instructions for fabricating simple, nanopipette-based, tunnelling probes, suitable for measuring conductance in single proteins. Our QMT probe is based on a high-aspect-ratio dual-channel nanopipette that integrates a pair of gold tunneling electrodes with a gap of less than 5 nm, fabricated via the pyrolytic deposition of carbon followed by the electrochemical deposition of gold. The gold tunneling electrodes can be functionalized using an extensive library of available surface modifications to achieve single-protein-electrode contact. We use a biotinylated thiol modification, in which a biotin-streptavidin-biotin bridge is used to form the single-protein junction. The resulting protein-coupled QMT probes enable the stable electrical measurement of the same single protein in solution for up to several hours. We also describe the analysis method used to interpret time-dependent single-protein conductance measurements, which can provide essential information for understanding electron transport and exploring protein dynamics. The total time required to complete the protocol is ~33 h and it can be carried out by users trained in less than 24 h.

Atomically precise nanoclusters predominantly seed gold nanoparticle syntheses

Seed-mediated synthesis strategies, in which small gold nanoparticle precursors are added to a growth solution to initiate heterogeneous nucleation, are among the most prevalent, simple, and productive methodologies for generating well-defined colloidal anisotropic nanostructures. However, the size, structure, and chemical properties of the seeds remain poorly understood, which partially explains the lack of mechanistic understanding of many particle growth reactions. Here, we identify the majority component in the seed solution as an atomically precise gold nanocluster, consisting of a 32-atom Au core with 8 halide ligands and 12 neutral ligands constituting a bound ion pair between a halide and the cationic surfactant: Au₃₂X₈[AQA⁺•X^-]₁₂ (X = Cl, Br; AQA = alkyl quaternary ammonium). Ligand exchange is dynamic and versatile, occurring on the order of minutes and allowing for the formation of 48 distinct Au₃₂ clusters with AQAX (alkyl quaternary ammonium halide) ligands. Anisotropic nanoparticle syntheses seeded with solutions enriched in Au₃₂X₈[AQA⁺•X^-]₁₂ show narrower size distributions and fewer impurity particle shapes, indicating the importance of this cluster as a precursor to the growth of well-defined nanostructures.

Shape tunability of copper nanocrystals deposited on nanorods

The significant role of metal particle geometry in dictating catalytic activity, selectivity, and stability is well established in heterocatalysis. However, this topic is rarely explored in semiconductor-metal hybrid photocatalytic systems, primarily due to the lack of synthetic control over this feature. Herein, we present a new synthetic route for the deposition of metallic Cu nanoparticles with spherical, elliptic, or cubic geometrical shapes, which are selectively grown on one side of the well-established CdSe@CdS nanorod photocatalytic system. An additional multipod morphology in which several nanorod branches are combined on a single Cu domain is presented as well. Cu is an earth-abundant low-cost catalyst known to promote a diverse gallery of organic transformations and is an excellent thermal and electrical conductor with interesting plasmonic properties. Its deposition on cadmium chalcogenide nanostructures is enabled here via mitigation of the reaction kinetics such that the cation exchange reaction is prevented. The structural diversity of these sophisticated nanoscale hybrid systems lays the foundations for shape-activity correlation studies and employment in various applications.

Nanoarchitectonics of Metallene Materials for Electrocatalysis

Controlling the synthesis of metal nanostructures is one approach for catalyst engineering and performance optimization in electrocatalysis. As an emerging class of unconventional electrocatalysts, two-dimensional (2D) metallene electrocatalysts with ultrathin sheet-like morphology have gained ever-growing attention and exhibited superior performance in electrocatalysis owing to their distinctive properties originating from structural anisotropy, rich surface chemistry, and efficient mass diffusion capability. Many significant advances in synthetic methods and electrocatalytic applications for 2D metallenes have been obtained in recent years. Therefore, an in-depth review summarizing the progress in developing 2D metallenes for electrochemical applications is highly needed. Unlike most reported reviews on the 2D metallenes, this review starts by introducing the preparation of 2D metallenes based on the classification of the metals (e.g., noble metals, and non-noble metals) instead of synthetic methods. Some typical strategies for preparing each kind of metal are enumerated in detail. Then, the utilization of 2D metallenes in electrocatalytic applications, especially in the electrocatalytic conversion reactions, including the hydrogen evolution reaction, oxygen evolution reaction, oxygen reduction reaction, fuel oxidation reaction, CO₂ reduction reaction, and N₂ reduction reaction, are comprehensively discussed. Finally, current challenges and opportunities for future research on metallenes in electrochemical energy conversion are proposed.

A tube-like Pd@coordination polymer with enhanced solar light harvesting for boosting photocatalytic H2 production in a wide pH range and seawater

Coordination polymers (CPs) have emerged as promising candidates for photocatalytic H₂ production owing to their structural tailorability and functional diversity. However, the development of CPs with high energy transfer efficiency for highly efficient photocatalytic H₂ production in a wide pH range still faces many challenges. Here we constructed a novel tube-like Pd(ii) coordination polymer with well-distributed Pd nanoparticles (denoted as Pd/Pd(ii)CPs) based on the coordination assembly of rhodamine 6G and Pd(ii) ions and further photo-reduction under visible light irradiation. Both the Br^- ion and double solvent play a key role in forming the hollow superstructures. The resulting tube-like Pd/Pd(ii)CPs exhibit high stability in aqueous solution with the pH range from 3 to 14 due to the high Gibbs free energies of protonation and deprotonation, which provides the feasibility of photocatalytic hydrogen generation in a wide pH range. Electromagnetic field calculations showed that the tube-like Pd/Pd(ii)CPs have a good confinement effect on light. Therefore, the H₂ evolution rate could reach 112.3 mmol h^-1 g^-1 at pH 13 under visible light irradiation, which is far superior to those of reported coordination polymer-based photocatalysts. Moreover, such Pd/Pd(ii)CPs could also reach a H₂ production rate of 37.8 mmol h^-1 g^-1 in seawater under visible light with low optical density (40 mW cm^-2) close to morning or cloudy sunlight. The above unique characteristics make the Pd/Pd(ii)CPs possess great potential for practical applications.

Formation mechanism of high-index faceted Pt-Bi alloy nanoparticles by evaporation-induced growth from metal salts

Nanoparticles with high-index facets are intriguing because such facets can lend the structure useful functionality, including enhanced catalytic performance and wide-ranging optical tunability. Ligand-free solid-state syntheses of high index-facet nanoparticles, through an alloying-dealloying process with foreign volatile metals, are attractive owing to their materials generality and high yields. However, the role of foreign atoms in stabilizing the high-index facets and the dynamic nature of the transformation including the coarsening and facet regulation process are still poorly understood. Herein, the transformation of Pt salts to spherical seeds and then to tetrahexahedra, is studied in situ via gas-cell transmission electron microscopy. The dynamic behaviors of the alloying and dealloying process, which involves the coarsening of nanoparticles and consequent facet regulation stage are captured in the real time with a nanoscale spatial resolution. Based on additional direct evidence obtained using atom probe tomography and density functional theory calculations, the underlying mechanisms of the alloying-dealloying process are uncovered, which will facilitate broader explorations of high-index facet nanoparticle synthesis.

In Situ and Emerging Transmission Electron Microscopy for Catalysis Research

Catalysts are the primary facilitator in many dynamic processes. Therefore, a thorough understanding of these processes has vast implications for a myriad of energy systems. The scanning/transmission electron microscope (S/TEM) is a powerful tool not only for atomic-scale characterization but also in situ catalytic experimentation. Techniques such as liquid and gas phase electron microscopy allow the observation of catalysts in an environment conducive to catalytic reactions. Correlated algorithms can greatly improve microscopy data processing and expand multidimensional data handling. Furthermore, new techniques including 4D-STEM, atomic electron tomography, cryogenic electron microscopy, and monochromated electron energy loss spectroscopy (EELS) push the boundaries of our comprehension of catalyst behavior. In this review, we discuss the existing and emergent techniques for observing catalysts using S/TEM. Challenges and opportunities highlighted aim to inspire and accelerate the use of electron microscopy to further investigate the complex interplay of catalytic systems.

Synthesis of dendritic cobalt with flower-like structure by a facile wet chemistry method as an excellent electromagnetic wave absorber

In this study, a three-dimensional (3D) floral dendritic cobalt (FDC) consisting of layered flakes was effectively synthesized using a facile wet chemistry method. The impact of the molar amount of NaOH on the microscopic morphology, magnetic characteristics, and electromagnetic wave (EMW) absorption properties of the FDC magnetic materials was comprehensively investigated. The results revealed that the prepared FDC features primary, secondary, and multi-level branches, with the majority of secondary branches being parallel to one another. The dendrites grew closely towards the flower's center at one end, while the tips extend in various directions, forming a dendritic flower cluster. The optimal reflection loss (RL) of S3 at 9.3 GHz was -56.34 dB with a thickness of 1.89 mm, and the maximum effective absorption bandwidth (EAB, RL < -10 dB) reached 6.0 GHz (12.0-18.0 GHz) at a thickness of 1.30 mm. Consequently, the FDC magnetic materials produced in this study presented a method for fabricating high-performance electromagnetic wave absorption (EMWA) materials.

Room Temperature Curable Copper Nanowire-Based Transparent Heater

Copper nanowires (Cu NWs) are a promising alternative to silver NWs to develop transparent conducting films (TCFs) due to their comparable electrical conductivity and relative abundance. Postsynthetic modifications of the ink and high-temperature postannealing processes for obtaining conducting films are significant challenges that need to be addressed before commercial deployment of these materials. In this work, we have developed an annealing-free (room temperature curable) TCF with Cu NW ink that requires minimal postsynthetic modifications. Organic acid pretreated Cu NW ink is used for spin-coating to obtain a TCF with a sheet resistance of 9.4 Ω/sq. and optical transparency of 67.4% at 550 nm. For oxidation protection, the Cu NW TCF is encapsulated with polydimethylsiloxane (PDMS). The encapsulated film is tested as a transparent heater at various voltages and shows good repeatability. These results demonstrate the potential of Cu NW-based TCFs as a replacement for Ag-NW based TCFs for a variety of optoelectronic applications, such as transparent heaters, touch screens, and photovoltaics.

Synthesis of nanoparticles via microfluidic devices and integrated applications

In recent years, nanomaterials have attracted the research intervention of experts in the fields of catalysis, energy, biomedical testing, and biomedicine with their unrivaled optical, chemical, and biological properties. From basic metal and oxide nanoparticles to complex quantum dots and MOFs, the stable preparation of various nanomaterials has always been a struggle for researchers. Microfluidics, as a paradigm of microscale control, is a remarkable platform for online stable synthesis of nanomaterials with efficient mass and heat transfer in microreactors, flexible blending of reactants, and precise control of reaction conditions. We describe the process of microfluidic preparation of nanoparticles in the last 5 years in terms of microfluidic techniques and the methods of microfluidic manipulation of fluids. Then, the ability of microfluidics to prepare different nanomaterials, such as metals, oxides, quantum dots, and biopolymer nanoparticles, is presented. The effective synthesis of some nanomaterials with complex structures and the cases of nanomaterials prepared by microfluidics under extreme conditions (high temperature and pressure), the compatibility of microfluidics as a superior platform for the preparation of nanoparticles is demonstrated. Microfluidics has a potent integration capability to combine nanoparticle synthesis with real-time monitoring and online detection, which significantly improves the quality and production efficiency of nanoparticles, and also provides a high-quality ultra-clean platform for some bioassays.

Chemical background of silver nanoparticles interfering with mammalian copper metabolism

The rapidly increasing application of silver nanoparticles (AgNPs) boosts their release into the environment, which raises a reasonable alarm for ecologists and health specialists. This is manifested as increased research devoted to the influence of AgNPs on physiological and cellular processes in various model systems, including mammals. The topic of the present paper is the ability of silver to interfere with copper metabolism, the potential health effects of this interference, and the danger of low silver concentrations to humans. The chemical properties of ionic and nanoparticle silver, supporting the possibility of silver release by AgNPs in extracellular and intracellular compartments of mammals, are discussed. The possibility of justified use of silver for the treatment of some severe diseases, including tumors and viral infections, based on the specific molecular mechanisms of the decrease in copper status by silver ions released from AgNPs is also discussed.

Microfluidic-Generated Seeds for Gold Nanotriangle Synthesis in Three or Two Steps

Nanoparticle synthesis has drawn great attention in the last decades. The study of crystal growth mechanisms and optimization of the existing methods lead to the increasing accessibility of nanomaterials, such as gold nanotriangles which have great potential in the fields of plasmonics and catalysis. To form such structures, a careful balance of reaction parameters has to be maintained. Herein, a novel synthesis of gold nanotriangles from seeds derived with a micromixer, which provides a highly efficient mixing and simple parameter control is reported. The impact of the implemented reactor on the primary seed characteristics is investigated. The following growth steps are studied to reveal the phenomena affecting the shape yield. The use of microfluidic seeds led to the formation of well-defined triangles with a narrower size distribution compared to the entirely conventional batch synthesis. A shortened two-step procedure for the formation of triangles directly from primary seeds, granting an express but robust synthesis is further described. Moreover, the need for a thorough study of seed crystallinity depending on the synthesis conditions, which - together with additional parameter optimization - will bring a new perspective to the use of micromixers which are promising for scaling up nanomaterial production is highlighted.

Fine-tuning of colloidal polymer crystals by molecular simulation

Through extensive molecular simulations we determine a phase diagram of attractive, fully flexible polymer chains in two and three dimensions. A rich collection of distinct crystal morphologies appear, which can be finely tuned through the range of attraction. In three dimensions these include the face-centered cubic, hexagonal close packed, simple hexagonal, and body-centered cubic crystals and the Frank-Kasper phase. In two dimensions the dominant structures are the triangular and square crystals. A simple geometric model is proposed, based on the concept of cumulative neighbors of ideal crystals, which can accurately predict most of the observed structures and the corresponding transitions. The attraction range can thus be considered as an adjustable parameter for the design of colloidal polymer crystals with tailored morphologies.

Practical Considerations for Simulating the Plasmonic Properties of Metal Nanoparticles

Simulating the plasmonic properties of colloidally derived metal nanoparticles with accuracy to their experimentally observed measurements is challenging due to the many structural and compositional parameters that influence their scattering and absorption properties. Correlation between single nanoparticle scattering measurements and simulated spectra emphasize these strong structural and compositional relationships, providing insight into the design of plasmonic nanoparticles. This Perspective builds from this history to highlight how the structural features of models used in simulation methods such as those based on the Finite-Difference Time-Domain (FDTD) method and Discrete Dipole Approximation (DDA) are of critical consideration for correlation with experiment and ultimately prediction of new nanoparticle properties. High-level characterizations such as electron tomography are discussed as ways to advance the accuracy of models used in such simulations, allowing the plasmonic properties of structurally complex nanoparticles to be better understood. However, we also note that the field is far from bringing experiment and simulation into agreement for plasmonic nanoparticles with complex compositions, reflecting analytical challenges that inhibit accurate model generation. Potential directions for addressing these challenges are also presented.

Nanoparticle Imprint Lithography: From Nanoscale Metrology to Printable Metallic Grids

Large scale and low-cost nanopatterning of materials is of tremendous interest for optoelectronic devices. Nanoimprint lithography has emerged in recent years as a nanofabrication strategy that is high-throughput and has a resolution comparable to that of electron-beam lithography (EBL). It is enabled by pattern replication of an EBL master into polydimethylsiloxane (PDMS), that is then used to pattern a resist for further processing, or a sol-gel that could be calcinated into a solid material. Although the sol-gel chemistry offers a wide spectrum of material compositions, metals are still difficult to achieve. This gap could be bridged by using colloidal nanoparticles as resist, but deep understanding of the key parameters is still lacking. Here, we use supported metallic nanocubes as a model resist to gain fundamental insights into nanoparticle imprinting. We uncover the major role played by the surfactant layer trapped between nanocubes and substrate, and measure its thickness with subnanometer resolution by using gap plasmon spectroscopy as a metrology platform. This enables us to quantify the van der Waals (VDW) interactions responsible for the friction opposing the nanocube motion, and we find that these are almost in quantitative agreement with the Stokes drag acting on the nanocubes during nanoimprint, that is estimated with a simplified fluid mechanics model. These results reveal that a minimum thickness of surfactant is required, acting as a spacer layer mitigating van der Waals forces between nanocubes and the substrate. In the light of these findings we propose a general method for resist preparation to achieve optimal nanoparticle mobility and show the assembly of printable Ag and Au nanocube grids, that could enable the fabrication of low-cost transparent electrodes of high material quality upon nanocube epitaxy.

Manipulating morphology and composition in colloidal heterometallic nanopods and nanodendrites

Branched Pt nanoparticles represent an exciting class of nanomaterials with high surface areas suitable for applications in electrocatalysis. Introducing a second metal can enhance performance and reduce cost. External factors such as capping agents and temperature have been used to offer insights into nanopod formation and to encourage their kinetic evolution. More recently, nanodendrites have been reported, though synthesis has generally been empirical; making controlled variation of morphology while maintaining bimetallic composition an elusive target. We report the combination of Pt with Fe under a range of conditions, yielding individually bimetallic nanoparticles whose construction sheds new light on nanopod and/or nanodendrite formation. Fine control of metal precursor reduction through modulating capping agents, reagents, and temperature initially directs nanopod synthesis. Morphology control is retained while composition is then varied from Pt-rich to Pt-poor. Additionally, conditions are identified that promote the collision-based branching of nanopod arms. This allows synthesis to be redirected for the selective growth of compositionally controlled nanodendrites in predictable fashion.

Ternary PtZrNi nanorods for efficient multifunctional electrocatalysis towards oxygen reduction and alcohol oxidation

Pt-based alloys with precise structure and composition design have been considered to be effective and robust novel electrocatalysts for fuel cells. Whereas, the sluggish kinetics of oxygen reduction reaction (ORR) and low intrinsic activity of Pt limited their real application on a large scale. Herein, a novel ternary PtZrNi nanorods (PtZrNi NRs) was synthesized via a facile wet-chemical method to achieve high electrocatalytic performance for both ORR and alcohol oxidation reaction owing to the synergism of chosen three elements and prominent one-dimensional morphology. Specifically, the PtZrNi NRs show enhanced mass and specific activities of 0.755 A mg_Pt^-1 and of 0.97 mA/cm² at 0.9 V_RHE towards ORR in acidic media, which are 4.7 and 4.4 times of those of commercial Pt/C, respectively. Additionally, in alkaline media, the PtZrNi NRs also exhibit superior ORR mass and specific activities of 3.216 A mg_Pt^-1and 4.13 mA/cm², enhanced by 34.6 and 31.3 times compared with those of commercial Pt/C, respectively. The PtZrNi NRs retain the nanorod shape well without agglomeration after an accelerated durability test (20000 cycles). This work may offer a new perspective for engineering high-performance Pt-based electrocatalysts for commercial fuel cells.

Solvent control of water O-H bonds for highly reversible zinc ion batteries

Aqueous Zn-ion batteries have attracted increasing research interest; however, the development of these batteries has been hindered by several challenges, including dendrite growth, Zn corrosion, cathode material degradation, limited temperature adaptability and electrochemical stability window, which are associated with water activity and the solvation structure of electrolytes. Here we report that water activity is suppressed by increasing the electron density of the water protons through interactions with highly polar dimethylacetamide and trimethyl phosphate molecules. Meanwhile, the Zn corrosion in the hybrid electrolyte is mitigated, and the electrochemical stability window and the operating temperature of the electrolyte are extended. The dimethylacetamide alters the surface energy of Zn, guiding the (002) plane dominated deposition of Zn. Molecular dynamics simulation evidences Zn²⁺ ions are solvated with fewer water molecules, resulting in lower lattice strain in the NaV₃O₈·1.5H₂O cathode during the insertion of hydrated Zn²⁺ ions, boosting the lifespan of Zn|| NaV₃O₈·1.5H₂O cell to 3000 cycles.

Photothermal Nanomaterials: A Powerful Light-to-Heat Converter

All forms of energy follow the law of conservation of energy, by which they can be neither created nor destroyed. Light-to-heat conversion as a traditional yet constantly evolving means of converting light into thermal energy has been of enduring appeal to researchers and the public. With the continuous development of advanced nanotechnologies, a variety of photothermal nanomaterials have been endowed with excellent light harvesting and photothermal conversion capabilities for exploring fascinating and prospective applications. Herein we review the latest progresses on photothermal nanomaterials, with a focus on their underlying mechanisms as powerful light-to-heat converters. We present an extensive catalogue of nanostructured photothermal materials, including metallic/semiconductor structures, carbon materials, organic polymers, and two-dimensional materials. The proper material selection and rational structural design for improving the photothermal performance are then discussed. We also provide a representative overview of the latest techniques for probing photothermally generated heat at the nanoscale. We finally review the recent significant developments of photothermal applications and give a brief outlook on the current challenges and future directions of photothermal nanomaterials.

Synthesis of Linear Black Gold Nanostructures Processable as Sunlight and Low-Energy Light Collecting Films for Photo-Thermoelectricity

As one of the effort to cope with the energy crisis and carbon neutrality, utilization of low-grade energy generated indoors (e.g., light) is imperative because this saves building and house energy, which accounts for ≈40% of total energy consumption. Although photovoltaic devices could contribute to energy savings, it is also necessary to harvest heat from indoor lights to generate electricity because the light absorbed by materials is mostly transformed into heat. For daily life uses, materials should not only have high absorptance and low emittance but also be easily processed into various forms. To this end, this work synthesizes black aqueous suspensions containing winding and bent linear gold nanostructures with diameters of 3-5 nm and length-to-diameter ratios of ≈4-10. Their optical and photo-thermal characteristics are understood through experimental and theoretical investigations. Black gold nanostructures are conveniently processed into metal-dielectric films on metal, glass, and flexible substrates. The film on copper has an absorptance of 0.97 and an emittance of 0.08. Under simulated sunlight and indoor LED light illumination, the film has equivalent photo-thermal and photo-thermoelectric performances to a top-tier sunlight-collecting film. This work attempts to modify the film structure to generate more usable electricity from low-energy indoor light.

Molecular Engineering of Colloidal Atoms

Creation of architectures with exquisite hierarchies actuates the germination of revolutionized functions and applications across a wide range of fields. Hierarchical self-assembly of colloidal particles holds the promise for materialized realization of structural programing and customizing. This review outlines the general approaches to organize atom-like micro- and nanoparticles into prescribed colloidal analogs of molecules by exploiting diverse interparticle driving motifs involving confining templates, interactive surface ligands, and flexible shape/surface anisotropy. Furthermore, the self-regulated/adaptive co-assembly of simple unvarnished building blocks is discussed to inspire new designs of colloidal assembly strategies.

Engineering magic number Au19 and Au20 cage structures using electron withdrawing atoms

Gold cages are a subset of gold nanoparticles and these structures are of major interest due to their favourable physiochemical properties. In order for these structures to be useful in applications, they must be chemically stable. The objective of this research is to transform non-magic number cage structures into magic number cage structures by the addition of electron-withdrawing groups on the cages. The electronic properties for Au₁₉X and Au₂₀X₂ (X = F, Cl, Br, I) are calculated and observed. It is expected that the electron-withdrawing groups will remove the electron density from the gold cages and leave them positively charged. We first optimize the geometries of the initial gold cages and verify the structures are a local minima. From there, we attach our halogens to the gold cages and optimize the structures to determine the NICS values and HOMO-LUMO gaps. NICS values were found to be more negative when a more electronegative halogen was used. Calculations have found that Au₁₉F and Au₂₀F₂ have the most negative NICS values, indicating greater spherical aromaticity. Iodine, being the least electronegative atom, had the most positive NICS value and smallest HOMO-LUMO gap. All calculations are compared to the magic cluster Au₁₈ which satisfies Hirsh's 2(N + 1)² rule for n = 2.