Water-Catalyzed Oxidation of Few-Layer Black Phosphorous in a Dark Environment

Epitaxial Growth of Flat, Metallic Monolayer Phosphorene on Metal Oxide

In recent years, two-dimensional (2D) group VA elemental materials have attracted considerable interest from physics/chemistry and materials science communities, with particular attention paid to honeycomb blue phosphorene. To date, phosphorene is limited to its α-phase and small sizes because it can only be produced by exfoliating black phosphorus crystals. Here, we report the direct synthesis of high-quality phosphorene on a nonmetallic copper oxide substrate by molecular beam epitaxy. By combining scanning tunneling microscopy/spectroscopy, X-ray photoelectron spectroscopy, and first-principles calculations, we demonstrate the growth intermediates and electronic structures of phosphorene on Cu₃O₂/Cu(111). Surprisingly, the grown phosphorene has a flat honeycomb lattice, similar to graphene, which exhibits a metallic nature. We reveal that the growth mechanism and morphology of phosphorene are strongly correlated with the surface structures of prepared copper oxide, and the resulting phosphorene can be stabilized after high-temperature annealing above 600 K even in oxygen gas. The high stability is closely related to the irregular Moiré pattern and structural corrugations of phosphorene on Cu₃O₂/Cu(111) that efficiently relieve the surface strain. These results shed light on future fabrication of large-scale, versatile 2D structures for interconnect and device integration.

Synthetic Applications of Oxidative Aromatic Coupling-From Biphenols to Nanographenes

Oxidative aromatic coupling occupies a fundamental place in the modern chemistry of aromatic compounds. It is a method of choice for the assembly of large and bewildering architectures. Considerable effort was also devoted to applications of the Scholl reaction for the synthesis of chiral biphenols and natural products. The ability to form biaryl linkages without any prefunctionalization provides an efficient pathway to many complex structures. Although the chemistry of this process is only now becoming fully understood, this reaction continues to both fascinate and challenge researchers. This is especially true for heterocoupling, that is, oxidative aromatic coupling with the chemoselective formation of a C-C bond between two different arenes. Analysis of the progress achieved in this field since 2013 reveals that many groups have contributed by pushing the boundary of structural possibilities, expanding into surface-assisted (cyclo)dehydrogenation, and developing new reagents.

Property-Activity Relationship of Black Phosphorus at the Nano-Bio Interface: From Molecules to Organisms

As a novel member of the two-dimensional nanomaterial family, mono- or few-layer black phosphorus (BP) with direct bandgap and high charge carrier mobility is promising in many applications such as microelectronic devices, photoelectronic devices, energy technologies, and catalysis agents. Due to its benign elemental composition (phosphorus), large surface area, electronic/photonic performances, and chemical/biological activities, BP has also demonstrated a great potential in biomedical applications including biosensing, photothermal/photodynamic therapies, controlled drug releases, and antibacterial uses. The nature of the BP-bio interface is comprised of dynamic contacts between nanomaterials (NMs) and biological systems, where BP and the biological system interact. The physicochemical interactions at the nano-bio interface play a critical role in the biological effects of NMs. In this review, we discuss the interface in the context of BP as a nanomaterial and its unique physicochemical properties that may affect its biological effects. Herein, we comprehensively reviewed the recent studies on the interactions between BP and biomolecules, cells, and animals and summarized various cellular responses, inflammatory/immunological effects, as well as other biological outcomes of BP depending on its own physical properties, exposure routes, and biodistribution. In addition, we also discussed the environmental behaviors and potential risks on environmental organisms of BP. Based on accumulating knowledge on the BP-bio interfaces, this review also summarizes various safer-by-design strategies to change the physicochemical properties including chemical stability and nano-bio interactions, which are critical in tuning the biological behaviors of BP. The better understanding of the biological activity of BP at BP-bio interfaces and corresponding methods to overcome the challenges would promote its future exploration in terms of bringing this new nanomaterial to practical applications.

A Chiral Polycyclic Aromatic Hydrocarbon Monkey Saddle

A contorted polycyclic aromatic hydrocarbon (PAH) in the shape of a monkey saddle has been synthesized in three steps from a readily available truxene precursor. The monkey saddle PAH is consisting of three five-, seven six-, and three eight-membered rings and has been unambiguously characterized by single-crystal X-ray diffraction. Owing to the three biaryl axes the monkey saddle PAH is inherently chiral. The inversion of the two enantiomeric structures into each other preferably occurs through a twisting of peripheral rings rather than by a fully planar intermediate, as has been calculated by DFT methods. Enantiomers were separated by chiral HPLC and inversion barriers determined by variable temperature circular dichroism spectroscopy, supporting the twisting mechanism.

Black phosphorus quantum dots as novel electrogenerated chemiluminescence emitters for the detection of Cu2+

Black phosphorus quantum dots with surface states and bandgap luminescence under NMP passivation are used for the detection of Cu²⁺.

Robust Amphiphobic Few-Layer Black Phosphorus Nanosheet with Improved Stability

Few-layer black phosphorus (FL-BP) has been intensively studied due to its attractive properties and great potential in electronic and optoelectronic applications. However, the intrinsic instability of FL-BP greatly limits its practical application. In this study, the amphiphobic FL-BP is achieved by functionalization of 1H,1H,2H,2H-perfluorooctyltrichlorosilane (PFDTS) on the surface of FL-BP. The obtained PFDTS coated FL-BP (FL-BP/PFDTS) demonstrates enhanced stability, which is not observed during significant degradation for 2 months in high moisture content environment (95% humidity). Particularly, attributing to the surface amphiphobicity, FL-BP/PFDTS exhibits strong surface water repellency in the presence of oleic acid (as the contaminant), while other passivation coating layers (such as hydrophilic or hydrophobic coating) become hydrophilicity under such conditions. Owing to this advantage, the obtained FL-BP/PFDTS demonstrates enhanced stability in high moisture content environment for 2 months, even though the surface is contaminated by oil liquid or other organic solvents (such as oleic acid, CH2Cl2, and N-methyl-2-pyrrolidone). The passivation of FL-BP by amphiphobic coating provides an effective approach for FL-BP stabilization toward future applications.

Continuously Tuning Electronic Properties of Few-Layer Molybdenum Ditelluride with in Situ Aluminum Modification toward Ultrahigh Gain Complementary Inverters

Semiconducting molybdenum ditelluride (2H-MoTe₂), a two-dimensional (2D) transition metal dichalcogenide, has attracted extensive research attention due to its favorable physical properties for future electronic devices, such as appropriate bandgap, ambipolar transport characteristic, and good chemical stability. The rational tuning of its electronic properties is a key point to achieve MoTe₂-based complementary electronic and optoelectronic devices. Herein, we demonstrate the dynamic and effective control of the electronic properties of few-layer MoTe₂, through the in situ surface modification with aluminum (Al) adatoms, with a view toward high-performance complementary inverter devices. MoTe₂ is found to be significantly electron doped by Al, exhibiting a continuous transport transition from p-dominated ambipolar to n-type unipolar with enhanced electron mobility. Using a spatially controlled Al doping technique, both p- and n-channels are established on a single MoTe₂ nanosheet, which gives complementary inverters with a record-high gain of ∼195, which stands out in the 2D family of materials due to the balanced p- and n-transport in Al-modified MoTe₂. Our studies coupled with the tunable nature of in situ modification enable MoTe₂ to be a promising candidate for high-performance complementary electronics.

Reversible Oxidation of Blue Phosphorus Monolayer on Au(111)

Practical applications of two-dimensional (2D) black phosphorus (BP) are limited by its fast degradation under ambient conditions, for which many different mechanisms have been proposed; however, an atomic level understanding of the degradation process is still hindered by the absence of bottom-up methods for the growth of large-scale few-layer black phosphorus. Recent experimental success in the fabrication of single-layer blue phosphorus provides a model system to probe the oxidation mechanism of two-dimensional (2D) phosphorene down to single-layer thicknesses. Here, we report an atomic-scale investigation of the interaction between molecular oxygen and blue phosphorus. The atomic structure of blue phosphorus and the local binding sites of oxygen have been precisely identified using qPlus-based noncontact atomic force microscopy. A combination of low-temperature scanning tunneling microscopy and X-ray photoelectron spectroscopy measurements reveal a thermally reversible oxidation process of blue phosphorus in a pure oxygen atmosphere. Our study clearly demonstrates the essential role of oxygen in the initial oxidation process, and it sheds further light on the fundamental pathways of the degradation mechanism.

Unveiling chemical reactivity and oxidation of 1T-phased group VI disulfides

Transition metal dichalcogenides (TMDs) are of particular interest because of their unique electrical and optical properties that evolve from the quantum confinement and surface effects. However, their long-term stability in air is proved to be a main concern for practical applications of the ultrathin materials, especially for TMDs with 1T phased structures. Here, we provide an in-depth understanding of the oxidation and degradation mechanisms of monolayers of group VIB disulfides, including TiS₂, ZrS₂, and HfS₂. As the atomic radius of the transitional metals increases, their air stability significantly decreases and the oxidation mechanisms are quite different from one another. In particular, the oxygen induced oxidations initiated at both the surface vacancy sites and edges of ZrS₂ and HfS₂ are studied, while the oxidation of TiS₂ starts at the edges and water plays a crucial role in the continuous oxidation process. Moreover, the defective sites expose the metals for activation and dissociation of either oxygen or water, causing the breakdown of the systems eventually. Meanwhile, these sites can be used as active centers for specific applications in catalysts and surface functionalized materials.

Interfacial Effects on the Band Edges of Ta3N5 Photoanodes in an Aqueous Environment: A Theoretical View

Ta₃N₅, as a fascinating photoanode for solar hydrogen production, is expected to split water without any bias, because its band edge potentials straddle H₂O redox potentials. Unfortunately, Ta₃N₅ photoanodes can split water only when a bias of at least 0.6–0.9 V is applied. It means that they exhibit an onset potential as high as 0.6–0.9 V_RHE (reversible hydrogen electrode). In this study, density functional theory calculations show that the band edge potentials of Ta₃N₅ have a shift of approximately −0.42 eV relative to vacuum level when exposed to water. The increased ratio of dissociated water at Ta₃N₅-water interface will further make the band edge potentials shift −0.85 eV relative to vacuum level, implying the anodic shifts of the onset potential for water oxidation. The findings may reveal the mystery of the unexpectedly high onset potential of Ta₃N₅, as high as 0.6–0.9 V_RHE.

•

We have studied interfacial effects on the band edges of Ta₃N₅ in an aqueous environment

•

Both water and the hydroxylated surface promote the formation of the interface dipole

•

High onset potentials of Ta₃N₅ may be ascribed to negative shift of band edge potentials

Conjugated Polymers with Oligoethylene Glycol Side Chains for Improved Photocatalytic Hydrogen Evolution

Conjugated polymers are emerging as promising organic photocatalysts for hydrogen evolution from water. However, it is still very challenging for conjugated polymers to realize highly efficient photocatalytic hydrogen evolution. Herein, we demonstrate an efficient strategy of hydrophilic side chain functionalization to boost the hydrogen evolution rates of conjugated polymers. By functionalizing conjugated polymers with hydrophilic oligo (ethylene glycol) monomethyl ether (OEG) side chains, a 90-fold improvement in hydrogen evolution rate has been achieved than that of alkyl-functionalized conjugated polymer. It is found that the OEG side chains interact robustly with Pt co-catalysts, resulting in more efficient charge transfer. Moreover, OEG side chains in conjugated polymers can adsorb H⁺ from water, resulting in significantly lowered energy levels on the surfaces of conjugated polymers, which enables cascade energy levels and enhances charge separation and photocatalytic performance. Our results indicate that rational side-chain engineering could facilitate the design of improved organic photocatalysts for hydrogen evolution.

•

Conjugated polymers with oligoethylene glycol side chains are prepared

•

Oligoethylene glycol side chains improve photocatalytic hydrogen evolution rates

•

Oligoethylene glycol side chains interact robustly with Pt co-catalysts

•

Oligoethylene glycol side chains enable cascade energy levels

Evaluating the Surface Chemistry of Black Phosphorus during Ambient Degradation

Black phosphorus (BP) is emerging as a promising candidate for electronic, optical, and energy storage applications. However, its poor ambient stability remains a critical challenge. Evaluation of few-layer liquid-exfoliated BP during ambient exposure using X-ray photoelectron spectroscopy and attenuated total reflectance Fourier transform infrared spectroscopy allows its surface chemistry to be investigated. Oxidation of liquid-exfoliated few-layer BP initially occurs through nonbridging oxide species, which convert to bridging oxide species after ambient exposure. We demonstrate the instability of these bridging oxide species, which undergo hydrolysis to form volatile phosphorus oxides and evaporate from the BP surface. FTIR spectroscopy, scanning transmission electron microscopy, and atomic force microscopy were used to confirm the formation of liquid oxides through a continuous oxidation cycle that results in the decomposition of BP. Furthermore, we show that the instability of few-layer BP originates from the formation of bridging oxide species.

Monolayer black phosphorus by sequential wet-chemical surface oxidation

We report a straightforward chemical methodology for controlling the thickness of black phosphorus flakes down to the monolayer limit by layer-by-layer oxidation and thinning, using water as solubilizing agent. Moreover, the oxidation process can be stopped at will by two different passivation procedures, namely the non-covalent functionalization with perylene diimide chromophores, which prevents the photooxidation, or by using a protective ionic liquid layer. The obtained flakes preserve their electronic properties as demonstrated by fabricating a BP field-effect transistor (FET). This work paves the way for the preparation of BP devices with controlled thickness.

Modifying the sensibility of nonmetal-doped phosphorene by local or global properties

The dopant atom X can modify the sensibility of X-doped phosphorene by tuning the electronic properties of X-doped phosphorene surfaces effectively. According to the adsorption strength and the amount of charge transfer between the adsorption species and X-doped phosphorene surfaces, the adsorption species can be roughly divided into three types.

Ambient Degradation-Induced Spin Paramagnetism in Phosphorene

The sizeable direct bandgap, high mobility, and long spin lifetimes at room temperature offer black phosphorus (BP) potential applications in spin-based semiconductor devices. Toward these applications, a critical step is creating a magnetic response in BP, which is arousing much interest. It is reported here that ambient degradation of BP, which is immediate and inevitable and greatly changes the semiconducting properties, creates magnetic moments, and any degree of degradation leads to notable paramagnetism. Its Landau factor g measured is ≈1.995, revealing that the magnetization mainly results from spin rather than orbital moments. Such magnetism most likely results from the unsaturated phosphorus in the vacancies which are stabilized by O adatoms. It can be tuned by changing any one of the ambient factors of ambient temperature, humidity, and light intensity, and can be stabilized by exposing BP in argon. The findings highlight the importance of evaluating the effect of ambient degradation-induced magnetism on BP's spin-based devices. The work seems an essential milestone toward the forthcoming research upsurge on BP's magnetism.

pH-Dependent Degradation of Layered Black Phosphorus: Essential Role of Hydroxide Ions

The practical application of layered black phosphorus (LBP) is compromised by fast decomposition in the presence of H₂ O and/or O₂ . The role of H₂ O is controversial. Herein, we propose a hydroxide ion (OH^- )-initiated degradation mechanism for LBP to elucidate the role of H₂ O. We found that LBP degraded faster in alkaline solutions than in neutral or acidic solutions with or without O₂ . Degradation rates of LBP increased linearly from pH 4 to 10. Density functional theory (DFT) calculations showed that OH^- initiated the decomposition of LBP through breaking the P-P bond and forming a P-O bond. The detection of hypophosphite, generated from OH^- reacting with P atoms, confirmed the hypothesis. Protons acted in a way distinctive from OH^- , by inducing deposition/aggregation or forming a cation-π layer to protect LBP from degradation. This work reveals the degradation mechanism of LBP and thus facilitates the development of effective stabilization technologies.

Two-dimensional black phosphorus: its fabrication, functionalization and applications

Phosphorus, one of the most abundant elements in the Earth (∼0.1%), has attracted much attention in the last five years since the rediscovery of two-dimensional (2D) black phosphorus (BP) in 2014. The successful scaling down of BP endows this 'old material' with new vitality, resulting from the intriguing semiconducting properties in the atomic scale limit, i.e. layer-dependent bandgap that covers from the visible light to mid-infrared light spectrum as well as hole-dominated ambipolar transport characteristics. Intensive research effort has been devoted to the fabrication, characterization, functionalization and application of BP and other phosphorus allotropes. In this review article, we summarize the fundamental properties and fabrication techniques of BP, with particular emphasis on the recent progress in molecular beam epitaxy growth of 2D phosphorus. Subsequently, we highlight recent progress in BP (opto)electronic device applications achieved via customized manipulation methods, such as interface, defect and bandgap engineering as well as forming Lego-like stacked heterostructures.

2D Phosphorene: Epitaxial Growth and Interface Engineering for Electronic Devices

Black phosphorus (BP), first synthesized in 1914 and rediscovered as a new member of the family of 2D materials in 2014, combines many extraordinary properties of graphene and transition-metal dichalcogenides, such as high charge-carrier mobility, and a tunable direct bandgap. In addition, it displays other distinguishing properties, e.g., ambipolar transport and highly anisotropic properties. The successful application of BP in electronic and optoelectronic devices has stimulated significant research interest in other allotropes and alloys of 2D phosphorene, a class of 2D materials consisting of elemental phosphorus. As an atomically thin sheet, the various interfaces presented in 2D phosphorene (substrate/phosphorene, electrode/phosphorene, dielectric/phosphorene, atmosphere/phosphorene) play dominant roles in its bottom-up synthesis, and determine several key characteristics for the devices, such as carrier injection, carrier transport, carrier concentration, and device stability. The rational design/engineering of interfaces provides an effective way to manipulate the growth of 2D phosphorene, and modulate its electronic and optoelectronic properties to realize high-performance multifunctional devices. Here, recent progress of the interface engineering of 2D phosphorene is highlighted, including the epitaxial growth of single-layer blue phosphorus on different substrates, surface functionalization of BP for high-performance complementary devices, and the investigation of the BP degradation mechanism in ambient air.

Quantitative Tracking of the Oxidation of Black Phosphorus in the Few-Layer Regime

Previous theoretical reports have described the oxidation of few-layer black phosphorus and its effects on the electronic properties. Theoretically, native oxide layers bring opportunities for band gap engineering, but the detection of the different types of oxides is still a challenge at the experimental level. In this work, we uncover a correlation between thermal processes and Raman shift for the A_g ¹, B_2g, and A_g ² vibrational modes. The thermal expansion coefficients (temperature range, 290-485 K) for the A_g ¹, B_2g, and A_g ² were -0.015, -0.027, and -0.028 cm^-1 K^-1, respectively. Differential scanning calorimetry analysis shows an endothermic process centered at 528 K, and it was related with a mass increase according to thermogravimetric analysis. Raman shift temperature dependence was correlated to theoretical lattice thermal expansion, and a significant deviation was detected in the stacking direction at 500 K.

Abnormal Near-Infrared Absorption in 2D Black Phosphorus Induced by Ag Nanoclusters Surface Functionalization

Black phosphorus (BP), as a fast emerging 2D material, shows promising potential in near-infrared (NIR) photodetection owing to its relatively small direct thickness-dependent bandgaps. However, the poor NIR absorption due to the atomically thin nature strongly hinders the practical application. In this study, it is demonstrated that surface functionalization of Ag nanoclusters on 2D BP can induce an abnormal NIR absorption at ≈746 nm, leading to ≈35 (138) times enhancement in 808 (730) nm NIR photoresponse for BP-based field-effect transistors. First-principles calculations reveal that localized bands are introduced into the bandgap of BP, serving as the midgap states, which create new transitions to the conduction band of BP and eventually lead to the abnormal absorption. This work provides a simple yet effective method to dramatically increase the NIR absorption of BP, which is crucial for developing high-performance NIR optoelectronic devices.

Black Phosphorus: Degradation Favors Lubrication

Due to its innate instability, the degradation of black phosphorus (BP) with oxygen and moisture was considered the obstacle for its application in ambient conditions. Here, a friction force reduced by about 50% at the degraded area of the BP nanosheets was expressly observed using atomic force microscopy due to the produced phosphorus oxides during degradation. Energy-dispersive spectrometer mapping analyses corroborated the localized concentration of oxygen on the degraded BP flake surface where friction reduction was observed. Water absorption was discovered to be essential for the degraded characteristic as well as the friction reduction behavior of BP sheets. The combination of water molecules as well as the resulting chemical groups (P-OH bonds) that are formed on the oxidized surface may account for the friction reduction of degraded BP flakes. It is indicated that, besides its layered structure, the ambient degradation of BP significantly favors its lubrication behavior.

Photo-oxidative Degradation and Protection Mechanism of Black Phosphorus: Insights from Ultrafast Dynamics

The environmental instability and protection of black phosphorus (BP) is one of the most attractive hotspots in two-dimensional materials. The generation of superoxide is believed to be the key culprit, while the photogenerated electron dynamics is yet to be known. In this work, we carry out time domain ab initio nonadiabatic molecular dynamics to understand the photogenerated electron dynamics at the molecule/BP interface. It is found that oxygen can trap the photogenerated electrons of BP rapidly owing to strong electron-phonon (e-p) coupling and becomes an active superoxide under light illumination. A good protection layer, such as perylene diimide (PDI), has comparable capabilities of trapping photogenerated electrons to oxygen, which can efficiently prevent the formation of superoxide and thus suppress the degradation of BP. Moreover, PDI can enhance the separation of photogenerated electron-hole pairs of BP by prolonging the time of holding photogenerated electrons of BP. In contrast, 7,7,8,8-tetracyano- p-quinodimethane (TCNQ) has weak e-p coupling and a large band edge offset between trapping and donor states and thereby poor trapping ability for photogenerated electrons, leading to poor protection efficiency. This study provides the first in-depth understanding of the BP degradation and protection mechanism from excited-state dynamics and can be applicable to other 2D photo-oxidative degradation.

Band offsets in new BN/BX (X = P, As, Sb) lateral heterostructures based on bond-orbital theory

Identifying heterostructures with tunable band alignments remains a difficult challenge. Here, based on bond-orbital theory, we propose a series of new BN/BX (X = P, As, Sb) lateral heterostructures (LHS). Our first principles calculations reveal that the LHS interlines have a substantial impact on the electronic properties. Importantly, we start with the chemical concepts, such as bond length and strength as well as orbital overlap interaction, in an attempt to thoroughly investigate the electronic properties, namely the band offset, the band gap (Eg) and the state of the energy level. We demonstrate that the newly designed BN/BX LHS have profound implications for developing advanced optoelectronics, such as high-performance light-emitting diodes and lasers. Furthermore, the new BN/BX LHS designed from the chemical viewpoint can shed new light on overcoming the enormous hurdle of ineffective and laborious material design.

Assessing and Mitigating the Hazard Potential of Two-Dimensional Materials

The family of two-dimensional (2D) materials is comprised of a continually expanding palette of unique compositions and properties with potential applications in electronics, optoelectronics, energy capture and storage, catalysis, and nanomedicine. To accelerate the implementation of 2D materials in widely disseminated technologies, human health and environmental implications need to be addressed. While extensive research has focused on assessing the toxicity and environmental fate of graphene and related carbon nanomaterials, the potential hazards of other 2D materials have only recently begun to be explored. Herein, the toxicity and environmental fate of postcarbon 2D materials, such as transition metal dichalcogenides, hexagonal boron nitride, and black phosphorus, are reviewed as a function of their preparation methods and surface functionalization. Specifically, we delineate how the hazard potential of 2D materials is directly related to structural parameters and physicochemical properties and how experimental design is critical to the accurate elucidation of the underlying toxicological mechanisms. Finally, a multidisciplinary approach for streamlining the hazard assessment of emerging 2D materials is outlined, thereby providing a pathway for accelerating their safe use in a range of technologically relevant contexts.

Effect of illumination and Se vacancies on fast oxidation of ultrathin gallium selenide

Gallium selenide (GaSe) has recently emerged as a unique platform due to its exciting properties, namely, large and fast photo-response, high carrier mobility and non-linear optical properties. However, exposure for a few days causes the fast oxidation of ultrathin GaSe under ambient conditions and the oxidation mechanism remains unclear. By means of density functional theory calculations and ab initio molecular dynamics simulations, we comprehensively investigated the possible sources that cause oxidation of ultrathin GaSe. Our results show that illumination and Se vacancies induce the fast oxidation of GaSe. Under illumination, photo-excited electrons from the surface of GaSe are effectively transferred to oxygen molecules and thus, superoxide anions (O2-) are generated that react with GaSe. Moreover, Se vacancies directly react with O2. In both the cases, the Ga-Se bonds are continually replaced by Ga-O bonds, which eventually leads to complete degradation of GaSe, accompanied with the formation of the oxidation products Ga2O3 and elemental Se. The comprehensive degradation mechanism unveiled herein lays an important foundation for the development of suitable protecting strategies in GaSe-based devices.

Covalent functionalization of black phosphorus nanoflakes by carbon free radicals for durable air and water stability

This work developed a simple and efficient method to covalently functionalize black phosphorus nanoflakes (BPNFs) with carbon free radicals from azodiisobutyronitrile (AIBN) molecules. BPNFs after successful modification (BPNFs-AIBN) not only had good stability in air and aqueous solution, but also still maintained good optical properties.

Understanding the Unexpected Product Distribution in the Aerial Oxidation of Carbene-Stabilized Diphosphorus Complex

Oxidation of nonmetallic singlet molecules by oxygen has its own share of intricacies. Herein, by means of DFT and ab initio techniques, mechanistic details of the aerial oxidation of an N-heterocyclic carbene (NHC) stabilized diphosphorus complex are revealed. This particular oxidation process is known to produce an unexpected P-P bond containing diphosphorus tetroxide complex, instead of the more thermodynamically stable oxo-bridged (P-O-P) compound. These findings suggest that the P-P bond containing less stabilized species is a kinetically controlled product (KCP) and obtained due to the presence of lower lying transition states (TSs) in the pathway leading to its formation, relative to the higher lying corresponding minimum-energy crossing points (MECPs) present in the pathway involved in the formation of the oxo-bridged species, which is the thermodynamically controlled product (TCP). Thus, an intriguing variant of the well-known KCP/TCP phenomenon is presented here, in which the KCP is formed not by merely traditionally known lower barrier heights of TSs involved in the formation of KCP, but by faster transmission of a system through a low barrier TS relative to a higher lying MECP. Additionally, the faster kinetics of an irreversible unimolecular O-O dissociation step, which avoids the formation of the TCP is a contributing factor in dictating the fate of the reaction. The insights provided herein may help to understand the oxidation of other P-P-containing species, such as black phosphorene.

Direct Observation of Semiconductor-Metal Phase Transition in Bilayer Tungsten Diselenide Induced by Potassium Surface Functionalization

Structures determine properties of materials, and controllable phase transitions are, therefore, highly desirable for exploring exotic physics and fabricating devices. We report a direct observation of a controllable semiconductor-metal phase transition in bilayer tungsten diselenide (WSe₂) with potassium (K) surface functionalization. Through the integration of in situ field-effect transistors, X-ray photoelectron spectroscopy, ultraviolet photoelectron spectroscopy measurements, and first-principles calculations, we identify that the electron doping from K adatoms drives bilayer WSe₂ from a 2H phase semiconductor to a 1T' phase metal. The phase transition mechanism is satisfactorily explained by the electronic structures and energy alignment of the 2H and 1T' phases. This explanation can be generally applied to understand doping-induced phase transitions in two-dimensional (2D) structures. Finally, the associated dramatic changes of electronic structures and electrical conductance make this controllable semiconductor-metal phase transition of interest for 2D semiconductor-based electronic and optoelectronic devices.

On-surface synthesis: a promising strategy toward the encapsulation of air unstable ultra-thin 2D materials

2D black phosphorus (BP) and transition metal chalcogenides (TMCs) have beneficial electronic, optical, and physical properties at the few-layer limit. However, irreversible degradation of exfoliated or chemical vapor deposition-grown ultrathin BP and TMCs like GaSe via oxidation under ambient conditions limits their applications. Herein, the on-surface growth of an oxidation-resistant 2D thin film of a metal coordination polymer is demonstrated by multiscale simulations. We show that the preparation of such heterostructures can be conducted in solution, in which pristine BP and GaSe present better stability than in an air environment. Our calculations reveal that the interaction between the polymer layer and 2D materials is dominated by van der Waals forces; thus, the electronic properties of pristine BP and GaSe are well preserved. Meanwhile, the isolation from oxygen and water can be achieved by monolayer polymers, due to the nature of their close-packed layers. Our facile strategy for enhancing the environmental stability of ultrathin materials is expected to accelerate efforts to implement 2D materials in electronic and optoelectronic applications.

Two-dimensional transition metal dichalcogenides: interface and defect engineering

This review summarizes the recent advances in understanding the effects of interface and defect engineering on the electronic and optical properties of TMDCs, as well as their applications in advanced (opto)electronic devices.

Identification of Lattice Oxygen in Few-Layer Black Phosphorous Exfoliated in Ultrahigh Vacuum and Largely Improved Ambipolar Field-Effect Mobilities by Hydrogenation and Phosphorization

Black phosphorus (BP) has recently attracted considerable attention due to its unique structure and fascinating optical and electronic properties as well as possible applications in photothermal agents. However, its main drawback is rapid degradation in ambient environments of H₂O and O₂, which has led to much research on the improvement of its stability. Unfortunately, this research has not shown great improvement in carrier mobilities. Here, we perform scanning tunneling microscopy observations of few-layer BP (FLBP) sheets exfoliated in ultrahigh vacuum and reveal, for the first time, the existence of lattice oxygen introduced during crystal growth. As a proof-of-concept application, hydrogenation is conducted to remove the lattice oxygen atoms followed by phosphorization, which repairs the phosphorous vacancies caused by mechanical exfoliation and hydrogenation. The resulting FLBP sheets show high ambipolar field-effect mobilities of 1374 cm² V^-1 s^-1 for holes and 607 cm² V^-1 s^-1 for electrons at 2 K. After storage in air for 3 days, the hole and electron mobilities only decrease to 1181 and 518 cm² V^-1 s^-1, respectively, and no structural degradation is observed. This work suggests an effective means to improve both the mobility and stability of BP sheets rendering practical application of FLBP sheets possible.

Midinfrared Electro-optic Modulation in Few-Layer Black Phosphorus

Black phosphorus stands out from the family of two-dimensional materials as a semiconductor with a direct, layer-dependent bandgap spanning the visible to mid-infrared (mid-IR) spectral range. It is, therefore, a very promising material for various optoelectronic applications, particularly in the important mid-IR range. While mid-IR technology has been advancing rapidly, both photodetection and electro-optic modulation in the mid-IR rely on narrow-band compound semiconductors, which are difficult and expensive to integrate with the ubiquitous silicon photonics. For mid-IR photodetection, black phosphorus has already been proven to be a viable alternative. Here, we demonstrate electro-optic modulation of mid-IR absorption in few-layer black phosphorus. Our experimental and theoretical results find that, within the doping range obtainable in our samples, the quantum confined Franz-Keldysh effect is the dominant mechanism of electro-optic modulation. A spectroscopic study on samples with varying thicknesses reveals strong layer dependence in the interband transition between specific pairs of sub-bands. Our results show that black phosphorus is a very promising material to realizing efficient mid-IR modulators.

Band-edge engineering via molecule intercalation: a new strategy to improve stability of few-layer black phosphorus

Through embedding small molecules into few-layer black phosphorous, the production of photo-generated superoxide on its surface can be suppressed.