Review lipopeptides biosurfactants: Mean classes and new insights for industrial, biomedical, and environmental applications

Production of the biosurfactant serrawettin W1 by Serratia marcescens S-1 improves hydrocarbon degradation

With the frequent occurrence of oil spills, the bioremediation of petroleum hydrocarbons pollution has attracted more and more attention. In this study, we investigated the biodegradation of crude oil by the biosurfactant-producing strain S-1. The strain was isolated from petroleum-contaminated soil and identified as Serratia marcescens according to partial 16S rDNA gene analysis. It was able to effectively degrade hydrocarbons with the concomitant production of biosurfactants at 20-30 °C, while there was no biosurfactant production and the degradation rate was lower at 37 °C. The biosurfactant was identified as serrawettin W1 by UPLC-ESI-MS, and was found to reduce the surface tension of water to 30 mN/m, with stable surface activity and emulsion activity at temperatures from 20 to 100 °C, pH of 2-10 and NaCl concentrations of 0-50 g/L. Serrawettin W1 significantly increased the cell surface hydrophobicity (CSH) and enhanced the bioavailability of hydrocarbon pollutants, which was conducive to the degradation of crude oil, including long-chain alkanes and aromatic hydrocarbons. Serratia marcescens S-1 has potential applications in bioremediation at low temperature.

Micellar Antibiotics of Bacillus

Members of the Bacillus genus, particularly the “Bacillus subtilis group”, are known to produce amphipathic lipopeptides with biosurfactant activity. This includes the surfactins, fengycins and iturins that have been associated with antibacterial, antifungal, and anti-viral properties. We have screened a large collection of Bacillus, isolated from human, animal, estuarine water and soil samples and found that the most potent lipopeptide producers are members of the species Bacillus velezensis. B. velezensis lipopeptides exhibited anti-bacterial activity which was localised on the surface of both vegetative cells and spores. Interestingly, lipopeptide micelles (6–10 nm diameter) were detectable in strains exhibiting the highest levels of activity. Micelles were stable (heat and gastric stable) and shown to entrap other antimicrobials produced by the host bacterium (exampled here was the dipeptide antibiotic chlorotetaine). Commercially acquired lipopeptides did not exhibit similar levels of inhibitory activity and we suspect that micelle formation may relate to the particular isomeric forms produced by individual bacteria. Using naturally produced micelle formulations we demonstrated that they could entrap antimicrobial compounds (e.g., clindamycin, vancomycin and resveratrol). Micellar incorporation of antibiotics increased activity. Bacillus is a prolific producer of antimicrobials, and this phenomenon could be exploited naturally to augment antimicrobial activity. From an applied perspective, the ability to readily produce Bacillus micelles and formulate with drugs enables a possible strategy for enhanced drug delivery.

Heavy Oil Storage Tanks Clean-up Using Biosurfactants and Investigation of the Synergistic Effect with Silica Nanoparticles

In this study, the synergistic effect of silica nanoparticle and biosurfactants on oil storage tank clean up was investigated. Rhamnolipid, saponin and silica nanoparticles were used to recover oil from refinery oily sludge in laboratory experiments. From our results, the optimum HLB value for the extraction process was about 10.5 for the mixture of 62.5% of rhamnolipid and 37.5% of saponin. Our results also showed that the simultaneous use of the biosurfactants and nanoparticles results in a synergistic effect that significantly enhances the process efficiency. Maximum yield of oil residual was obtained about 4% at the optimum condition (HLB value of 10.5 for mixture of the biosurfactants and 3 g/l of silica nanoparticles). The results of present study showed that this method has the potential for industrial applications and may be used in oil recovery from oily sludge.

Valorization of date juice by the production of lipopeptide biosurfactants by a Bacillus mojavensis BI2 strain: bioprocess optimization by response surface methodology and study of surface activities

Lipopeptides biosurfactants (BioS) are natural surface-active compounds produced by a variety of microorganisms. They have great interest in environmental, biomedical and agro-industrial fields. However their large-scale application and production is limited by the cost of culture media and the low yield of production. Therefore, the improvement of the production yields and the development of efficient and cost-effective bioprocess became of a great interest. In this aim, we applied the response surface method to optimize an economic BioS production by a newly isolated strain Bacillus mojavensis BI2 on date Juice called "Luegmi" as unique carbon and nitrogen source. Using a Box-Bhenken design, we studied the effect of three independent variables on lipopeptide production; Leugmi concentration, Na₂HPO₄ and incubation time. The results of this study showed that Leugmi concentration at 25%, Na₂HPO₄ at 0.1% and incubation time of 24 h were optimal conditions for BioS  production, with a maximum Surface Tension (ST) decreasing capacity of 55% corresponding to 27 mN/m and an Oil Dispersing Activity (ODA) of 30 cm² corresponding to a diameter of 6 cm. Preliminary characterization of the BioS produced on Luegmi by UV-Spectra and Thin Layer Chromatography showed its lipopeptide nature. Physic-chemical characterization of the produced lipopeptide on Leugmi showed its great surface activities and stabilities at different pH, temperature and salts concentration. The results of this study suggested that Leugmi, an agricultural byproducts can be used as a low-cost substrate to enhance the yield of lipopeptide BioS with great surface activities for potential environmental application.

Host nutrition-based approach for biotechnological production of the antifungal cyclic lipopeptide jagaricin

In today's, society multi-resistant pathogens have become an emerging threat, which makes the search for novel anti-infectives more urgent than ever. A promising class of substances are cyclic lipopeptides like the antifungal jagaricin. Jagaricin is formed by the bacterial mushroom pathogen Janthinobacterium agaricidamnosum. It has shown antifungal activity against human pathogenic fungi like Candida albicans and Aspergillus fumigatus. In addition, jagaricin is nearly non-toxic for plants, which makes it a promising agent for agricultural applications. Cyclic lipopeptides formed by microorganisms originate from their secondary metabolism. This makes it very challenging to determine the inducing factor for product formation, especially for unknown microbial systems like J. agaricidamnosum. In the presented study, a biotechnological process for jagaricin formation was developed, investigating impact factors like the medium, oxygen availability, and phosphate. For this reason, experiments were conducted on microtiter plate, shake flask, and stirred tank bioreactor level. Ultimately, a final maximum jagaricin concentration of 251 mg L^-1 (15.5 mg_Jagaricin∙g_CDW^-1) could be achieved, which is an increase of approximately 458 % in comparison to previous results in standard glucose medium. This concentration allows the production of significantly higher amounts of jagaricin and enables further experiments to investigate the potential of this substance.

Sustainable Surfactin Production by Bacillus subtilis Using Crude Glycerol from Different Wastes

Most biosurfactants are obtained using costly culture media and purification processes, which limits their wider industrial use. Sustainability of their production processes can be achieved, in part, by using cheap substrates found among agricultural and food wastes or byproducts. In the present study, crude glycerol, a raw material obtained from several industrial processes, was evaluated as a potential low-cost carbon source to reduce the costs of surfactin production by Bacillus subtilis #309. The culture medium containing soap-derived waste glycerol led to the best surfactin production, reaching about 2.8 g/L. To the best of our knowledge, this is the first report describing surfactin production by B. subtilis using stearin and soap wastes as carbon sources. A complete chemical characterization of surfactin analogs produced from the different waste glycerol samples was performed by liquid chromatography-mass spectrometry (LC-MS) and Fourier transform infrared spectroscopy (FTIR). Furthermore, the surfactin produced in the study exhibited good stability in a wide range of pH, salinity and temperatures, suggesting its potential for several applications in biotechnology.

New Continuous Process for the Production of Lipopeptide Biosurfactants in Foam Overflowing Bioreactor

In this work, an original culture process in bioreactor named overflowing continuous culture (O-CC) was developed to produce and recover continuously mycosubtilin, a lipopeptide antifungal biosurfactant of major interest. The lipopeptide production was first investigated in shake conical flasks in different culture media [ammonium citrate sucrose (ACS), Difco sporulation medium (DSM), and Landy], followed by a pH condition optimization using 3-(N-morpholino)propanesulfonic acid (MOPS) and 2-(N-morpholino)ethanesulfonic acid (MES) buffered media. A simple theoretical modeling of the biomass evolution combined with an experimental setup was then proposed for O-CC processed in stirred tank reactor at laboratory scale. Seven O-CC experiments were done in modified Landy medium at the optimized pH 6.5 by applying dilution rates comprised between 0.05 and 0.1 h^-1. The O-CC allowed the continuous recovery of the mycosubtilin contained in the foam overflowing out of the reactor, achieving a remarkable in situ product removal superior to 99%. The biomass concentration in the overflowing foam was found to be twofold lower than the biomass concentration in the reactor, relating advantageously this process to a continuous one with biomass feedback. To evaluate its performances regarding the type of lipopeptide produced, the O-CC process was tested with strain BBG116, a mycosubtilin constitutive overproducing strain that also produces surfactin, and strain BBG125, its derivative strain obtained by deleting surfactin synthetase operon. At a dilution rate of 0.1 h^-1, specific productivity of 1.18 mg of mycosubtilin⋅g^-1(DW)⋅h^-1 was reached. Compared with other previously described bioprocesses using almost similar culture conditions and strains, the O-CC one allowed an increase of the mycosubtilin production rate by 2.06-fold.

Genetic engineering of the precursor supply pathway for the overproduction of the nC14-surfactin isoform with promising MEOR applications

Background

Surfactin, a representative biosurfactant of lipopeptide mainly produced by Bacillus subtilis, consists of a cyclic heptapeptide linked to a β-hydroxy fatty acid chain. The functional activity of surfactin is closely related to the length and isomerism of the fatty acid chain.

Results

In this study, the fatty acid precursor supply pathway in Bacillus subtilis 168 for surfactin production was strengthened through two steps. Firstly, pathways competing for the precursors were eliminated with inactivation of pps and pks. Secondly, the plant medium-chain acyl-carrier protein (ACP) thioesterase (BTE) from Umbellularia californica was overexpressed. As a result, the surfactin titer after 24 h of cultivation improved by 34%, and the production rate increased from 0.112 to 0.177 g/L/h. The isoforms identified by RP-HPLC and GC–MS showed that the proportion of nC₁₄-surfactin increased 6.4 times compared to the control strain. A comparison of further properties revealed that the product with more nC₁₄-surfactin had higher surface activity and better performance in oil-washing. Finally, the product with more nC₁₄-surfactin isoform had a higher hydrocarbon-emulsification index, and it increased the water-wettability of the oil-saturated silicate surface.

Conclusion

The obtained results identified that enhancing the supply of fatty acid precursor is very essential for the synthesis of surfactin. At the same time, this study also proved that thioesterase BTE can promote the production of nC₁₄-surfactin and experimentally demonstrated its higher surface activity and better performance in oil-washing. These results are of great significance for the MEOR application of surfactin.

Graphic abstract

Kurstakin molecules facilitate diesel oil assimilation by Acinetobacter haemolyticus strain 2SA through overexpression of alkane hydroxylase genes

Biodegradation is a cost-effective process commonly used to eliminate many xenobiotic hydrocarbons such as diesel oils. However, their hydrophobic character reduces the biodegradation efficiency. In order to overcome this hurdle, kurstakins isolated from Bacillus thuringiensis strain 7SA were used as emulsifying agents. The influence of kurstakin molecules on diesel oil degradation by Acinetobacter haemolyticus strain 2SA was evaluated in the presence and absence of the aforementioned lipopeptide. The degradation rates and gene expressions of alkane hydroxylases were evaluated at days 4, 10, 14 and 21. Results showed that kurstakin molecules increased the hydrophobicity of 2SA. Moreover, diesel oil degradation activities were higher in the presence of kurstakin with 29%, 35%, 29% and 23% improvement at 4th, 10th, 14th and 21st day respectively. Statistical analysis indicated that the difference between the degradation rates in the presence and absence of kurstakin was significant with p = 0.03. The detection of three different hydroxylase genes namely alkB, almA and cyp153 in 2SA genome, might have allowed more efficient degradability of alkanes. According to the real-time PCR results, cyp153 was the most induced gene during diesel oil degradation in the presence and absence of kurstakin. Yet, the three genes demonstrated higher levels of expression in the presence of kurstakin when compared to its absence. This study showed that kurstakins enhance the diesel oil biodegradation rate by increasing the hydrophobicity of 2SA. In addition to their anti-fungal activities, kurstakins can be used as biosurfactant to increase biodegradation of diesel oil.

A review on new aspects of lipopeptide biosurfactant: Types, production, properties and its application in the bioremediation process

Nowadays, the worldwide search regarding renewable products from natural resources is increasing due to the toxicity of chemical counterparts. Biosurfactants are surface-active compounds that contain several physiological functions that are used in industries like food, pharmaceutical, petroleum and agriculture. Microbial lipopeptides have gained more attention among the researchers for their low toxicity, efficient action and good biodegradability when compared with other surfactants. Because of their versatile properties, lipopeptide compounds are utilized in the remediation of organic and inorganic pollutants. This review presented a depth evaluation of lipopeptide surfactants in the bioremediation process and their properties to maintain a sustainable environment. Lipopeptide can acts as a replacement to chemical surfactants only if they meet industrial-scale production and low-cost substrates. This review also demonstrated the production of a lipopeptide biosurfactant from a low-cost substrate and depicted plausible techniques to manage the substrate residues to determine its ability in the different applications particularly in the bioremediation process.

Antifungal potential against Sclerotinia sclerotiorum (Lib.) de Bary and plant growth promoting abilities of Bacillus isolates from canola (Brassica napus L.) roots

Endophytic bacteria show important abilities in promoting plant growth and suppressing phytopathogens, being largely explored in agriculture as biofertilizers or biocontrol agents. Bacteria from canola roots were isolated and screened for different plant growth promotion (PGP) traits and biocontrol of Sclerotinia sclerotiorum. Thirty isolates belonging to Bacillus, Paenibacillus, Lysinibacillus, and Microbacterium genera were obtained. Several isolates produced auxin, siderophores, hydrolytic enzymes, fixed nitrogen and solubilized phosphate. Five isolates presented antifungal activity against S. sclerotiorum by the dual culture assay and four of them also inhibited fungal growth by volatile organic compounds production. All antagonistic isolates belonged to the Bacillus genus, and had their genomes sequenced for the search of biosynthetic gene clusters (BGC) related to antimicrobial metabolites. These isolates were identified as Bacillus safensis (3), Bacillus pumilus (1), and Bacillus megaterium (1), using the genomic metrics ANI and dDDH. Most strains showed several common BGCs, including bacteriocin, polyketide synthase (PKS), and non-ribosomal peptide synthetase (NRPS), related to pumilacidin, bacillibactin, bacilysin, and other antimicrobial compounds. Pumilacidin-related mass peaks were detected in acid precipitation extracts through MALDI-TOF analysis. The genomic features demonstrated the potential of these isolates in the suppression of plant pathogens; however, some aspects of plant-bacterial interactions remain to be elucidated.

Enrichment and Isolation of Surfactin-degrading Bacteria

A total of 100 environmental samples were investigated for their ability to degrade 1 g/L surfactin as a substrate. Among them, two enrichment cultures, which exhibited microbial growth as well as surfactin degradation, were selected and further investigated. After several successive cultivations, nanopore sequencing of full-length 16S rRNA genes with MinION^TM was used to analyze the bacterial species in the enrichment cultures. Variovorax spp., Caulobacter spp., Sphingopyxis spp., and Pseudomonas spp. were found to be dominant in these surfactin-degrading mixed cultures. Finally, one strain of Pseudomonas putida was isolated as a surfactin-degrading bacterium. This strain degraded 1 g/L surfactin below a detectable level within 14 days, and C₁₃ surfactin was degraded faster than C₁₅ surfactin.

Evidence that protein corona reduces the release of antimicrobial peptides from polymeric nanocapsules in milk

The antimicrobial peptide produced by Bacillus velesensis P34 has a broad activity against Gram-positive bacteria, showing potential as natural food preservative. In this work, nanocapsules (NCs) containing the peptide P34 were produced using the polymers poly-ε-caprolactone (PCL) or Eudragit RS-100 (EUD), and their antimicrobial activities were assessed evaluating L. monocytogenes growth in synthetic media, milk and isolated milk proteins. As results, cationic and anionic nanocapsules were obtained, with zeta potential ranging from +15 to +28 mV for EUD and around -19 mV for PCL, and average diameter in the range of 104-130 nm and 224-245 nm, respectively. In the antimicrobial tests, only the P34-EUD NCs presented activity against L. monocytogenes in BHI broth, possibly due to the EUD high swelling and permeability properties, as compared with PCL. In whole and skimmed milk, the P34-EUD NCs caused no inhibition of L. monocytogenes growth, due to a possible interaction of casein proteins with the NCs surface resulting in protein corona formation, which interfered with the antimicrobial peptide release. Therefore, the application of polymeric NCs as antimicrobial delivery systems in foods could be limited by the polymer type, and the adhesion of specific matrix proteins that could form protein corona, reducing the bioactive compound release.

Synthetic and Bio-Derived Surfactants Versus Microbial Biosurfactants in the Cosmetic Industry: An Overview

This article includes an updated review of the classification, uses and side effects of surfactants for their application in the cosmetic, personal care and pharmaceutical industries. Based on their origin and composition, surfactants can be divided into three different categories: (i) synthetic surfactants; (ii) bio-based surfactants; and (iii) microbial biosurfactants. The first group is the most widespread and cost-effective. It is composed of surfactants, which are synthetically produced, using non-renewable sources, with a final structure that is different from the natural components of living cells. The second category comprises surfactants of intermediate biocompatibility, usually produced by chemical synthesis but integrating fats, sugars or amino acids obtained from renewable sources into their structure. Finally, the third group of surfactants, designated as microbial biosurfactants, are considered the most biocompatible and eco-friendly, as they are produced by living cells, mostly bacteria and yeasts, without the intermediation of organic synthesis. Based on the information included in this review it would be interesting for cosmetic, personal care and pharmaceutical industries to consider microbial biosurfactants as a group apart from surfactants, needing specific regulations, as they are less toxic and more biocompatible than chemical surfactants having formulations that are more biocompatible and greener.

Development and Genetic Engineering of Hyper-Producing Microbial Strains for Improved Synthesis of Biosurfactants

Current research energies are fixated on the synthesis of environmentally friendly and non-hazardous products, which include finding and recognizing biosurfactants that can substitute synthetic surfactants. Microbial biosurfactants are surface-active compounds synthesized intracellularly or extracellularly. To use biosurfactants in various industries, it is essential to understand scientific engagements that demonstrate its potentials as real advancement in the 21st century. Other than applying a substantial effect on the world economic market, engineered hyper-producing microbial strains in combination with optimized cultivation parameters have made it probable for many industrial companies to receive the profits of 'green' biosurfactant innovation. There needs to be an emphasis on the worldwide state of biosurfactant synthesis, expression of biosurfactant genes in expressive host systems, the recent developments, and prospects in this line of research. Thus, molecular dynamics with respect to genetic engineering of biosynthetic genes are proposed as new biotechnological tools for development, improved synthesis, and applications of biosurfactants. For example, mutant and hyper-producing recombinants have been designed efficaciously to advance the nature, quantity, and quality of biosurfactants. The fastidious and deliberate investigation will prompt a comprehension of the molecular dynamics and phenomena in new microorganisms. Throughout the decade, valuable data on the molecular genetics of biosurfactant have been produced, and this solid foundation would encourage application-oriented yields of the biosurfactant production industry and expand its utilization in diverse fields. Therefore, the conversations among different interdisciplinary experts from various scientific interests such as microbiology, biochemistry, molecular biology, and genetics are indispensable and significant to accomplish these objectives.

Synthesis of d-glycopyranosyl depsipeptides using Passerini reaction

A protocol based on Passerini multi-component reaction has been developed for facile, efficient and atom economical synthesis of a small library of twenty potential bioactive (2R)-2-(d-glycopyranosyl)-2-acyloxyacetamides using perbenzylated d-glycopyranosyl aldehydes, substituted isocyanides and different aliphatic/aromatic carboxylic acids. All twenty synthesized d-glycopyranosyl α-acyloxy amides, commonly known as depsipeptides were unambiguously identified on the basis of their spectral (IR, ¹H, ¹³C NMR, COSY, HSQC, NOESY and HRMS) data analysis.

Biosurfactant production from newly isolated Rhodotorula sp.YBR and its great potential in enhanced removal of hydrocarbons from contaminated soils

One of the very promising methods in the field of bioremediation of hydrocarbons is the application of biosurfactant- producing microorganisms based on the use of wastewater as renewable substrates of culture media, contributing to the reduction of costs. With this aim, the production, characterization and properties of the yeast strain YBR producing a biosurfactant newly isolated from an oilfield in Algeria, using wastewater from olive oil mills (OOMW) as a substrate for a low-cost and effective production, have been investigated. Screening of biosurfactant production was carried out with different tests, including emulsification index test (E24), drop collapse test, oil spreading technique and measurement of surface tension (ST). The isolated yeast strain was found to be a potent biosurfactant producer with E24 = 69% and a significant reduction in ST from 72 to 35 mN m^-1. The study of the cultural, biochemical, physiological and genetic characteristics of the isolate allowed us to identify it as Rhodotorula sp. strain YBR. Fermentation was carried out in a 2.5 L Minifors Bioreactor using crude OOMW as culture medium, the E₂₄ value reached 90% and a reduction of 72 to 35 mN m^-1 in ST. A biosurfactant yield = 10.08 ± 0.38 g L^-1 was recorded. The characterization by semi-purification and thin layer chromatography (TLC) of the crude extract of biosurfactant showed the presence of peptides, carbohydrates and lipids in its structure. The crude biosurfactant exhibited interesting properties such as: low critical micellar concentration (CMC), significant reduction in ST and strong emulsifying activity. In addition, it has shown stability over a wide range of pH (2-12), temperature (4-100 °C) and salinity (1-10%). More interestingly, the produced biosurfactant has proven to be of great potential application in the remobilization of hydrocarbons from polluted soil with a removal rate of greater than 95%.

Synthesis of Lipopeptides by CLipPA Chemistry

Lipidation of polypeptides with a fatty acid to form N-linked lipopeptides can be a time consuming process due to the need to mask other reactive function groups present on the side chains of amino acids. Cysteine Lipidation on a Peptide or Amino acid (CLipPA) technology enables the direct lipidation of unprotected peptides containing a free thiol group to afford S-lipidated lipopeptides. A generalized procedure for the synthesis of S-lipopeptides is described which facilities rapid preparation of tens of analogs of lipopeptides from a single thiolated polypeptide precursor.

Bacillus spp. metabolites are effective in eradicating Aedes aegypti (Diptera: Culicidae) larvae with low toxicity to non-target species

The growing spread of dengue, chikungunya and Zika viruses demand the development of new and environmentally safe control methods for their vector, the mosquito Aedes aegypti. This study aims to find novel larvicidal agents from mutualistic (endophytic and rhizospheric) or edaphic bacteria that have no action against non-target organisms. Eleven out of the 254 bacterial strains tested were able to kill Ae. aegypti larvae. Larvicidal activity did not depend on presence of cells, since culture supernatants or crude lipopeptide extracts (CLEs) killed the larvae. Bacillus safensis BacI67 and Bacillus paranthracis C21 supernatants were the best performing supernatants, displaying the lowest lethal concentrations (LC50 = 31.11 µL/mL and 45.84 µL/mL, respectively). Bacillus velezensis B64a and Bacillus velezensis B15 produced the best performing CLEs (LC50 = 0.11 mg/mL and 0.12 mg/mL, respectively). Mass spectrometry analysis of CLEs detected a mixture of surfactins, iturins, and fengycins. The samples tested were weakly- or non-toxic to mammalian cells (RAW 264.7 macrophages and VERO cells) and non-target organisms (Caenorhabditis elegans, Galleria mellonella, Scenedesmus obliquus, and Tetrahymena pyriformis) - especially B. velezensis B15 CLE. The biosynthetic gene clusters related to secondary metabolism identified by whole genome sequencing of the four best performing bacteria strains revealed clusters for bacteriocin, beta-lactone, lanthipeptide, non-ribosomal peptide synthetases, polyketide synthases (PKS), siderophores, T3PKS, type 1 PKS-like, terpenes, thiopeptides, and trans-AT-PKS. Purification of lipopeptides may clarify the mechanisms by which these extracts kill Ae. aegypti larvae.

Characterization of low-cost glycolipoprotein biosurfactant produced by Lactobacillus plantarum 60 FHE isolated from cheese samples using food wastes through response surface methodology and its potential as antimicrobial, antiviral, and anticancer activities

Considering the need of new lactic acid bacteria (LAB) for the production of novel biosurfactant (BS) molecules, the current study brings out a new insight on the exploration of cheese samples for BS producers and process optimization for industrial applications. In view of this, Lactobacillus plantarum 60FHE, Lactobacillus paracasei 75FHE, and Lactobacillus paracasei 77FHE were selected as the most operative strains. The biosurfactants (BSs) described as glycolipoproteins via Fourier-transform infrared spectroscopy (FTIR) exhibited antimicrobial activity against the food-borne pathogens. L. plantarum 60FHE BS showed an anticancer activity against colon carcinoma cells and had a week antiviral activity against Hepatitis A virus. Furthermore, glycolipoprotein production was enhanced by 1.42-fold through the development of an optimized process using central composite design (CCD). Emulsifying activities were stable after 60-min incubation from 4 to 120 °C, at pH 2-12, and after the addition of NaCl (2-14%). Characterization by nuclear magnetic resonance spectroscopy (¹H NMR) revealed that BS produced from strain 60FHE was glycolipoprotein. L. plantarum produced mixed BSs determined by Liquid Chromatography/Mass Spectrometry (LC-MS). Thus, indicating that BS was applied as a microbial food prevention and biomedical. Also, L. plantarum 60FHE BS was achieved with the use of statistical optimization on inexpensive food wastes.

Food-Poisoning Bacteria Employ a Citrate Synthase and a Type II NRPS To Synthesize Bolaamphiphilic Lipopeptide Antibiotics*

Mining the genome of the food-spoiling bacterium Burkholderia gladioli pv. cocovenenans revealed five nonribosomal peptide synthetase (NRPS) gene clusters, including an orphan gene locus (bol). Gene inactivation and metabolic profiling linked the bol gene cluster to novel bolaamphiphilic lipopeptides with antimycobacterial activity. A combination of chemical analysis and bioinformatics elucidated the structures of bolagladin A and B, lipocyclopeptides featuring an unusual dehydro-β-alanine enamide linker fused to an unprecedented tricarboxylic fatty acid tail. Through a series of targeted gene deletions, we proved the involvement of a designated citrate synthase (CS), priming ketosynthases III (KS III), a type II NRPS, including a novel desaturase for enamide formation, and a multimodular NRPS in generating the cyclopeptide. Network analyses revealed the evolutionary origin of the CS and identified cryptic CS/NRPS gene loci in various bacterial genomes.

Correlation between the Antimicrobial Activity and Metabolic Profiles of Cell Free Supernatants and Membrane Vesicles Produced by Lactobacillus reuteri DSM 17938

The aim of the work is to assess the antimicrobial activities of Cell Free Supernatants (CFS) and Membrane Vesicles (MVs), produced by Lactobacillus reuteri DSM 17938, versus Gram-positive and Gram-negative bacteria and investigate their metabolic profiles. The Minimum Inhibitory Concentration was determined through the broth microdilution method and cell proliferation assay while the Minimum Bactericidal Concentration was determined by Colony Forming Units counts. The characteristics of the antimicrobial compounds were evaluated by pH adjustments, proteinase treatment, and size fractionation of the CFS. The cytotoxicity of CFS was tested on two human cell lines. A detailed snapshot of the L. reuteri metabolism was attained through an untargeted metabolic profiling by means of high resolution Fourier Transform Ion Cyclotron Resonance Mass Spectrometry (FT-ICR MS) coupled with Electrospray Ionization Source (ESI). The results showed (i) a greater efficacy of CFS and its fractions towards Gram-negative compared to Gram-positive bacteria; (ii) an antimicrobial effect related to pH-dependent compounds but not to MVs; (iii) a molecular weight < 3 KDa as well as an a non-proteinaceous nature of the antimicrobial compounds; and (iv) more than 200 and 500 putative metabolites annotated in MVs and supernatants, covering several classes of metabolites, including amino acids, lipids, fatty and organic acids, polyalcohols, nucleotides, and vitamins. Some putative compounds were proposed not only as characteristic of specific fractions, but also possibly involved in antimicrobial activity.

Direct synthesis of cyclic lipopeptides using intramolecular native chemical ligation and thiol-ene CLipPA chemistry

Naturally occurring cyclic lipopeptides exhibit a diverse range of biological activities and possess several favourable properties. Chemically synthesising and modifying these natural compounds can alter their biological and physical properties. Cyclic lipopeptides are often difficult to synthesise, especially when the lipid moiety is directly attached to the cyclic scaffold. The construction of a series of cyclic lipopeptide analogues of the antifungal peptide iturin A is reported herein. The synthesis of the parent peptide macrocycle was achieved using native chemical ligation (NCL), whereupon the regenerated free thiol was used to attach a lipid moiety using Cysteine Lipidation on a Peptide or Amino acid (CLipPA) technology.

A novel sophorolipid-producing Candida keroseneae GBME-IAUF-2 as a potential agent in microbial enhanced oil recovery (MEOR)

The biosurfactants have extensive applications in food and petroleum microbiology. The aims of this research were isolation and characterization of thermo-tolerant biosurfactants from highly producing yeast strains. The Bushnell Hass medium was used for screening the biosurfactant-producing yeasts. Biosurfactant presence was evaluated using oil displacement assay and surface tension test. The best biosurfactant-producing strain was named Candida keroseneae GBME-IAUF-2 and its 5.8s-rDNA sequence was deposited in GenBank, NCBI, under the accession number MT012957.1. The thin layer chromatography and Fourier-transform infrared spectroscopy analysis confirmed that the extracted biosurfactant was sophorolipid with a significant surface activity. The purified sophorolipid decreased the surface tension of water from 72 to 29.1 mN/m. Its maximum emulsification index, E24%, was recorded as 60% and preserved 92.06-97.25% of its original activity at 110-120°C. It also preserved 89.11% and 84.73% of its original activity in pH of 9.3 and 10.5, respectively. It preserved 96.66-100% of its original activity in saline extreme conditions. This is the first report of sophorolipid production by the yeast C. keroseneae. According to the high thermal, pH and saline stability, the sophorolipid produced by C. keroseneae GBME-IAUF-2 could be highly recommended for applications in microbial enhanced oil recovery as well as food industries as an excellent emulsifying agent.

Eco-friendly biosurfactant from Wickerhamomyces anomalus CCMA 0358 as larvicidal and antimicrobial

Kitchen waste oil (KWO) was evaluated as a substrate for production of biosurfactant by Wickerhamomyces anomalus CCMA 0358 and was tested against Aedes aegypti larvae, the mosquito causing neglected diseases, such as dengue fever, Zika, and Chikungunya, achieving 100 % mortality in the lowest concentration (6.25 %) evaluated in 24 h. Furthermore, possible applications of this compound were evaluated as antibacterial, antiadhesive, and antifungal. At a concentration of 50 %, the biosurfactant was found to inhibit the growth of Bacillus cereus, showing high inhibitions levels against Salmonella Enteritidis, Staphylococcus aureus, and Escherichia coli. The antifungal activity was evaluated against Aspergillus, Cercospora, Colletotrichum, and Fusarium, obtaining results of up to 95 % inhibition. In addition to these promising results, the yeast W. anomalus produced the biosurfactant from an inexpensive substrate, which increases the possibility of its application in several industries owing to the low cost involved.

Agrobacterium tumefaciens C58 presence affects Bacillus velezensis 32a ecological fitness in the tomato rhizosphere

The persistence of pathogenic Agrobacterium strains as soil-associated saprophytes may cause an inconsistency in the efficacy of the biocontrol inoculants under field condition. The study of the interaction occurring in the rhizosphere between the beneficial and the pathogenic microbes is thus interesting for the development of effective biopesticides for the management of crown gall disease. However, very little is still known about the influence of these complex interactions on the biocontrol determinants of beneficial bacteria, especially Bacillus strains. This study aimed to evaluate the effect of the soil borne pathogen Agrobacterium tumefaciens C58 on root colonization and lipopeptide production by Bacillus velezensis strain 32a during interaction with tomato plants. Results show that the presence of A. tumefaciens C58 positively impacted the root colonization level of the Bacillus strain. However, negative impact on surfactin production was observed in Agrobacterium-treated seedling, compared with control. Further investigation suggests that these modulations are due to a modified tomato root exudate composition during the tripartite interaction. Thus, this work contributes to enhance the knowledge on the impact of interspecies interaction on the ecological fitness of Bacillus cells living in the rhizosphere.

Fish Waste Based Lipopeptide Production and the Potential Application as a Bio-Dispersant for Oil Spill Control

There is a growing acceptance worldwide for the application of dispersants as a marine oil spill response strategy. The development of more effective dispersants with less toxicity and higher biodegradability would be a step forward in improving public acceptance and regulatory approvals for their use. By applying advances in environmental biotechnology, a bio-dispersant agent with a lipopeptide biosurfactant produced by Bacillus subtilis N3-1P as the key component was formulated in this study. The economic feasibility of producing biosurfactant (a high-added-value bioproduct) from fish waste-based peptone as a nutrient substrate was evaluated. Protein hydrolyzate was prepared from cod liver and head wastes obtained from fish processing facilities. Hydrolysis conditions (i.e., time, temperature, pH and enzyme to substrate level) for preparing protein hydrolyzates were optimized by response surface methodology using a factorial design. The critical micelle dilution (CMD) value for biosurfactant produced from the fish liver and head waste generated peptones was 54.72 and 47.59 CMD, respectively. Biosurfactant product generated by fish liver peptone had a low critical micelle concentration of 0.18 g L-1 and could reduce the surface tension of distilled water to 27.9 mN/m. Structure characterization proved that the generated biosurfactant product belongs to the lipopeptide class. An alternative to the key surfactant dioctyl sulfosuccinate sodium (DOSS) used in Corexit 9500 has been proposed based on a binary mixture of lipopeptides and DOSS that exhibited synergistic effects. Using the standard baffled flask test, a high dispersion efficiency of 76.8% for Alaska North Slope oil was achieved at a biodispersant composition of 80/20 (v/v) of lipopeptides/DOSS. The results show that fish waste can be utilized to produce a more effective, environmentally acceptable and cost-efficient biodispersant that can be applied to oil spills in the marine environment.

Effect of Amino Acids on the Production of Biosurfactant by Pediococcus Acidilactici F70

In this research, the surface activity of bacterial supernatant and cell surface was measured by the method of oil drain ring. The influence of 19 kinds of amino acids (Histidine, Threonine, Valine, Isoleucine, Leucine, Phenylalanine, Arginine, Proline, Methionine, Tryptophan, Alanine, Glycine, Glutamine, Cysteine, Hydroxyproline, Valine, Asparagine, Proline, Glutamine, Serine, and Glutamic acid, Hydroxyproline, Tyrosine) on the production of biosurfactant by Pediococcus acidilactici F70 was studied by single factor experiment, and the main amino acids promoting the production of biosurfactant were selected by Plackett–Burman design. The results showed that the yield of biological surfactant with added amino acid increased, and the yield of Glutamine produced biosurfactant in the supernatant was the highest, which was two times higher than that of the control group (414.00mg/L); the yield of biosurfactant on the cell surface was the highest when Arginine was added, which was three times higher than that of the control group. In the end, 8 of the 19 amino acids (Glycine, Tryptophan, Proline, Methionine, Arginine, Leucine, Serine and Alanine) were selected to promote the production of biosurfactants of Pediococcus acidilactici F70. The results of Plackett–Burman design showed that Alanine, Proline and Leucine had significant effects on the production of biosurfactants.

Diversity of cyclic antimicrobial lipopeptides from Bacillus P34 revealed by functional annotation and comparative genome analysis

Cyclic lipopeptides (CLPs) from Bacillus strains have demonstrated a wide range of bioactivities making them interesting candidates for different applications in the pharmaceutical, food and biotechnological industries. Genome sequencing, together with phylogenetic analysis of the Bacillus sp. P34, isolated from a freshwater fish gut, showed that the bacterial strain belongs to the Bacillus velezensis group. In silico investigation of metabolic gene clusters of nonribosomal peptide synthetases (NRPS) revealed the genetic elements associated with the synthesis of surfactin, fengycin and iturin family component bacillomycin. Further, an assay was conducted to investigate the production of CLPs in the presence of heat inactivated bacterial cultures or fungal spores. Maximum fengycin concentration was observed at 24 h (2300-2700 mg/mL), while maximum iturin amounts were detected at 48 h (250 mg/mL) in the presence of heat-inactivated spores of Aspergillus niger. Heat-inactivated cells of Listeria monocytogenes caused a reduction of both fengycin and iturin amounts. The production of fengycins A and B and the iturin family component bacillomycin L was confirmed by mass spectrometry analyses. This study reinforces the potential of B. velezensis P34 as a valuable strain for biotechnological production of CLPs recognized as important antimicrobial substances.

Chemical diversity and mode of action of natural products targeting lipids in the eukaryotic cell membrane

Covering: up to 2019Nature furnishes bioactive compounds (natural products) with complex chemical structures, yet with simple, sophisticated molecular mechanisms. When natural products exhibit their activities in cells or bodies, they first have to bind or react with a target molecule in/on the cell. The cell membrane is a major target for bioactive compounds. Recently, our understanding of the molecular mechanism of interactions between natural products and membrane lipids progressed with the aid of newly-developed analytical methods. New technology reconnects old compounds with membrane lipids, while new membrane-targeting molecules are being discovered through the screening for antimicrobial potential of natural products. This review article focuses on natural products that bind to eukaryotic membrane lipids, and includes clinically important molecules and key research tools. The chemical diversity of membrane-targeting natural products and the molecular basis of lipid recognition are described. The history of how their mechanism was unveiled, and how these natural products are used in research are also mentioned.

In vitro efficacy of the lipopeptide biosurfactant surfactin-C15 and its complexes with divalent counterions to inhibit Candida albicans biofilm and hyphal formation

Surfactin is a type of cyclic lipopeptide biosurfactant implicated in a wide range of applications. Although its antimicrobial activity has been characterized, its effect on Candida albicans physiology remains to be elucidated. The present study evaluated the influence of surfactin-C₁₅ (SF) and its complexes with divalent counterions on C. albicans biofilm formation and preformed biofilms. The SF and metal(II)-SF complexes inhibited biofilm formation and reduced the metabolic activity of mature biofilms in a concentration-dependent manner. The same concentrations of the compounds studied dislodged preexisting biofilms grown on polystyrene plates. Moreover, SF and its metal(II) complexes reduced the mRNA expression of hypha-specific genes HWP1, ALS1, ALS3, ECE1 and SAP4 without exhibiting significant growth inhibition. Further research showed that the compounds tested reduced cellular surface hydrophobicity (CSH). These results suggest that SF and metal(II)-SF complexes could be used as anti-biofilm agents against C. albicans hypha-related infections in clinical practice.

Ultrashort Cationic Lipopeptides-Effect of N-Terminal Amino Acid and Fatty Acid Type on Antimicrobial Activity and Hemolysis

Ultrashort cationic lipopeptides (USCLs) are promising antimicrobial agents that hypothetically may be alternatively used to combat pathogens such as bacteria and fungi. In general, USCLs consist of fatty acid chains and a few basic amino acid residues. The main shortcoming of USCLs is their relatively high cytotoxicity and hemolytic activity. This study focuses on the impact of the hydrophobic fatty acid chain, on both antimicrobial and hemolytic activities. To learn more about this region, a series of USCLs with different straight-chain fatty acids (C8, C10, C12, C14) attached to the tripeptide with two arginine residues were synthesized. The amino acid at the N-terminal position was exchanged for proteinogenic and non-proteinogenic amino acid residues (24 in total). Moreover, the branched fatty acid residues were conjugated to N-terminus of a dipeptide with two arginine residues. All USCLs had C-terminal amides. USCLs were tested against reference bacterial strains (including ESKAPE group) and Candida albicans. The hemolytic potential was tested on human erythrocytes. Hydrophobicity of the compounds was evaluated by RP-HPLC. Shortening of the fatty acid chain and simultaneous addition of amino acid residue at N-terminus were expected to result in more selective and active compounds than those of the reference lipopeptides with similar lipophilicity. Hypothetically, this approach would also be beneficial to other antimicrobial peptides where N-lipidation strategy was used to improve their biological characteristics.

Metagenomic insights into bioaugmentation and biovalorization of oily industrial wastes by lipolytic oleaginous yeast Yarrowia lipolytica during successive batch fermentation

The lipolytic oleaginous yeast Yarrowia lipolytica was used in the bioaugmentation and biovalorization of oily industrial wastes during successive-batch fermentation. Five cycles of nonsterile successive batch fermentation with 70% medium replacement achieved the highest oil removal of 68.1 ± 5.60% and produced biomass and lipid yields of 0.213 ± 0.07 g/g-COD and 146.2 ± 46.5 mg/g-COD, respectively. The cell-bound lipase activity observed in the system was 170.74 ± 32 U/L. The auto-flocculation efficiency of the biomass was >90% within 60 Min. The microbial community changes between Y. lipolytica and indigenous microorganisms were monitored by metagenomic next-generation sequencing of internal transcribed spacer rDNA regions for yeasts and 16S rRNA gene for bacteria. Ylipolytica lipolytica was retained in the consortium together with other indigenous strains until the fifth cycle. Other minor oleaginous yeasts such as Kodamaea ohmeri and Candida tropicalis as well as polyhydroxyalkanoate-accumulating bacteria were found and are likely to have participated in lipid production. This study has shown the robustness of Y. lipolytica in nonsterile successive batch fermentation and its use could contribute greatly to the practical valorization of industrial wastes for lipids and lipases.

Complete genome sequence of Bacillus velezensis LPL-K103, an antifungal cyclic lipopeptide bacillomycin L producer from the surface of lemon

Bacillus velezensis LPL-K103, which shows strong antifungal function, was isolated from the surface of lemon in Beijing, China. The complete genome of B. velezensis LPL-K103 contains a circular chromosome of 3,933,292 bp (46.61% G+C content). According to genomic analysis, 4080 protein-coding genes, 113 RNAs (27 rRNAs + 86 tRNAs), and a non-ribosomal peptide synthase gene cluster involved in antifungal cyclic lipopeptide bacillomycin L biosynthesis were identified. Here, we propose that the biosynthesis pathway of bacillomycin L in LPL-K103 depends on its genome information.

Structure elucidation of bacterial nonribosomal lipopeptides

We provide a summary of the tools, which allow elucidate the structures of nonribosomal lipopetides.

Evaluation of Yield and Surface Tension-lowering Activity of Iturin A Produced by Bacillus subtilis RB14

Bacillus subtilis RB14 produces the lipopeptide antibiotic iturin A by submerged and biofilm fermentation. In this study, we optimized the conditions for iturin A production in a jar fermentor. The maximum yield of iturin A was 932 mg L^-1 after 120 h. The surface tension of water decreased from 72.0 to 39.0 mN m^-1 as the concentrations of C₁₄ iturin A increased, indicating that C₁₄ iturin A behaves as a surfactant in water. The critical micellar concentration obtained from the intersection of two fitted lines was 1.2 × 10^-4 M. Moreover, the surface tension of water decreased as the length of the alkyl chain of iturin A increased.

Advances on research in the use of agro-industrial waste in biosurfactant production

Biosurfactants are amphiphilic molecules produced by a variety of microorganisms, including bacteria, yeast and filamentous fungi. Unlike chemically synthesized surfactants, biosurfactants present advantages, such as biodegradability, low toxicity, high selectivity and activity under extreme temperature, pH and salinity conditions, as well as a low critical micelle concentration. Moreover, they can be produced from agro-industrial waste and renewable sources. Their structural diversity and functional properties mean that they have potential applications in various industrial processes as wetting agents, dispersants, emulsifiers, foaming agents, food additives and detergents, as well as in the field of environmental biotechnology. However, opportunities for their commercialization have been limited due to the low yields obtained in the fermentation processes involved in their production as well as the use of refined raw materials, which means higher cost in production. In an attempt to solve these limitations on the commercialization of biosurfactants, various research groups have focused on testing the use of inexpensive alternative sources, such as agro-industrial waste, as substrates for the production of different biosurfactants. In addition to enabling the economical production of biosurfactants, the use of such waste aims to reduce the accumulation of compounds that cause environmental damage. This review shows advances in biosurfactant production carried out using different waste materials or by-products from agro-industrial activities.

Production of Biosurfactant Produced from Used Cooking Oil by Bacillus sp. HIP3 for Heavy Metals Removal

Heavy metals from industrial effluents and sewage contribute to serious water pollution in most developing countries. The constant penetration and contamination of heavy metals into natural water sources may substantially raise the chances of human exposure to these metals through ingestion, inhalation, or skin contact, which could lead to liver damage, cancer, and other severe conditions in the long term. Biosurfactant as an efficient biological surface-active agent may provide an alternative solution for the removal of heavy metals from industrial wastes. Biosurfactants exhibit the properties of reducing surface and interfacial tension, stabilizing emulsions, promoting foaming, high selectivity, and specific activity at extreme temperatures, pH, and salinity, and the ability to be synthesized from renewable resources. This study aimed to produce biosurfactant from renewable feedstock, which is used cooking oil (UCO), by a local isolate, namely Bacillus sp. HIP3 for heavy metals removal. Bacillus sp. HIP3 is a Gram-positive isolate that gave the highest oil displacement area with the lowest surface tension, of 38 mN/m, after 7 days of culturing in mineral salt medium and 2% (v/v) UCO at a temperature of 30 °C and under agitation at 200 rpm. An extraction method, using chloroform:methanol (2:1) as the solvents, gave the highest biosurfactant yield, which was 9.5 g/L. High performance liquid chromatography (HPLC) analysis confirmed that the biosurfactant produced by Bacillus sp. HIP3 consists of a lipopeptide similar to standard surfactin. The biosurfactant was capable of removing 13.57%, 12.71%, 2.91%, 1.68%, and 0.7% of copper, lead, zinc, chromium, and cadmium, respectively, from artificially contaminated water, highlighting its potential for bioremediation.

Bacillus subtilis: A plant-growth promoting rhizobacterium that also impacts biotic stress

Plants encounter many biotic agents, such as viruses, bacteria, nematodes, weeds, and arachnids. These entities induce biotic stress in their hosts by disrupting normal metabolism, and as a result, limit plant growth and/or are the cause of plant mortality. Some biotic agents, however, interact symbiotically or synergistically with their host plants. Some microbes can be beneficial to plants and perform the same role as chemical fertilizers and pesticides, acting as a biofertilizer and/or biopesticide. Plant growth promoting rhizobacteria (PGPR) can significantly enhance plant growth and represent a mutually helpful plant-microbe interaction. Bacillus species are a major type of rhizobacteria that can form spores that can survive in the soil for long period of time under harsh environmental conditions. Plant growth is enhanced by PGPR through the induction of systemic resistance, antibiosis, and competitive omission. Thus, the application of microbes can be used to induce systemic resistance in plants against biotic agents and enhance environmental stress tolerance. Bacillus subtilis exhibits both a direct and indirect biocontrol mechanism to suppress disease caused by pathogens. The direct mechanism includes the synthesis of many secondary metabolites, hormones, cell-wall-degrading enzymes, and antioxidants that assist the plant in its defense against pathogen attack. The indirect mechanism includes the stimulation of plant growth and the induction of acquired systemic resistance. Bacillus subtilis can also solubilize soil P, enhance nitrogen fixation, and produce siderophores that promote its growth and suppresses the growth of pathogens. Bacillus subtilis enhances stress tolerance in their plant hosts by inducing the expression of stress-response genes, phytohormones, and stress-related metabolites. The present review discusses the activity of B. subtilis in the rhizosphere, its role as a root colonizer, its biocontrol potential, the associated mechanisms of biocontrol and the ability of B. subtilis to increase crop productivity under conditions of biotic and abiotic stress.