Bioremediation of industrial effluents containing heavy metals using brewing cells of Saccharomyces cerevisiae as a green technology: a review

Increased copper bioremediation ability of new transgenic and adapted Saccharomyces cerevisiae strains

Environmental pollution with heavy metals is a very serious ecological problem, which can be solved by bioremediation of metal ions by microorganisms. Yeast cells, especially Saccharomyces cerevisiae, are known to exhibit a good natural ability to remove heavy metal ions from an aqueous phase. In the present work, an attempt was made to increase the copper-binding properties of S. cerevisiae. For this purpose, new strains of S. cerevisiae were produced by construction and integration of recombinant human MT2 and GFP-hMT2 genes into yeast cells. The ySA4001 strain expressed GFP-hMT2p under the constitutive pADH1 promoter and the ySA4002 and ySA4003 strains expressed hMT2 and GFP-hMT2 under the inducible pCUP1 promoter. An additional yMNWTA01 strain was obtained by adaptation of the BY4743 wild type S. cerevisiae strain to high copper concentrations. The yMNWTA01, ySA4002, and ySA4003 strains exhibited an enhanced ability for copper ion bioremediation.

Influence of the metabolic state on the tolerance of Pichia kudriavzevii to heavy metals

This work aims to examine the influence of the metabolic state of the yeast Pichia kudriavzevii on the susceptibility to a metals mixture (5 mg L^-1 Cd, 10 mg L^-1 Pb, and 5 mg L^-1 Zn). Cells exposed to the metals mixture in the presence of 25 mmol L^-1 glucose displayed a higher loss of membrane integrity and proliferation capacity, compared to cells incubated in the absence of glucose. The analysis of the effect of individual metals revealed that glucose increased the toxic effect of Cd marginally, and of Pb significantly. The increased susceptibility to heavy metals due to glucose was attenuated in the simultaneous presence of a mitochondrial respiration inhibitor such as sodium azide (NaN₃ ). ATP-depleted yeast cells, resulting from treatment with the non-metabolizable glucose analogue 2-deoxy-d-glucose, showed an increased susceptibility to heavy metals mixture. Pre-incubation of yeast cells with 1 or 1.5 mmol L^-1 Ca²⁺ reduced significantly (P < 0.05) the loss of membrane integrity induced by the metals mixture. These findings contribute to the understanding of metals mechanisms of toxicity in the non-conventional yeast P. kudriavzevii.

Influence of operating parameters on the performance of magnetic seeding flocculation

In the present study, magnetic seeding flocculation was applied to remove copper (200 mg/L) and turbidity (180 mg/L) from simulated microetch copper waste. Fe3O4 particles (40 to 1600 mesh) were used as magnetic seeds. Poly-aluminum chloride (PAC) and anionic polyacrylamide (PAM) were added as coagulant and flocculant, respectively. The effect of operating factors, such as the dosages of the coagulant and flocculant, initial pH of the wastewater, and dosage and size of the magnetic seeds, on copper and turbidity removal was systematically investigated. In addition, settling speed, floc-size distribution, and volume of sludge were measured with and without the addition of magnetic seeds to compare the efficiency of magnetic seeding to that of traditional flocculation. The results indicated that the highest settling speed, the largest floc size, and the smallest volume of sludge were obtained simultaneously when the dosage and size of magnetic seeds were 2.0 g/L and 300–400 mesh, respectively. High removal efficiencies of 98.53 and 94.72 % for copper and turbidity, respectively, were also achieved under this condition; values that are 4.11 and 0.61 % higher, respectively, than those found in traditional flocculation. The high performance might be attributed to efficient collision of particles and slightly moderate vortex centrifugal force of inertia among the magnetic seeds, which could produce larger magnetic flocs with lower moisture.

Is biosorption suitable for decontamination of metal-bearing wastewaters? A critical review on the state-of-the-art of biosorption processes and future directions

For the past few decades, biosorption has been widely investigated for the removal of different contaminants in aqueous media. A number of biomasses of different genre have been identified to possess good biosorption capacity. Insights into biosorption mechanisms have been provided by various researchers in order to develop a fundamental scientific understanding of the biosorption process. However, biosorption has not been employed widely for its large-scale commercial applications. The key factors that affect the growth and evolution of biosorption as a practical technology for decontamination of wastewaters include, (1) lack of investigations on multi-component solutions and wastewaters with complex matrix effects, (2) incomplete understanding of physico-chemical characteristics of biomasses of different types, (3) lack of studies to improve the performance of biosorbents through surface functionalization, and (4) non-integration of biosorption in wastewater/water treatment plants. This critical review aims to identify and discuss the practical limitations of biosorption and provide future research directions to make biosorption a technologically viable process with emphasis on selection and modification of biomasses to suit desired treatment applications, identify appropriate operation modes for large-scale applications of biosorption, and perform techno-economic evaluation of overall biosorption processes.

Adaptively Evolving Bacterial Communities for Complete and Selective Reduction of Cr(VI), Cu(II), and Cd(II) in Biocathode Bioelectrochemical Systems

Bioelectrochemical systems (BESs) have been shown to be useful in removing individual metals from solutions, but effective treatment of electroplating and mining wastewaters requires simultaneous removal of several metals in a single system. To develop multiple-reactor BESs for metals removal, biocathodes were first individually acclimated to three different metals using microbial fuel cells with Cr(VI) or Cu(II) as these metals have relatively high redox potentials, and microbial electrolysis cells for reducing Cd(II) as this metal has a more negative redox potential. The BESs were then acclimated to low concentrations of a mixture of metals, followed by more elevated concentrations. This procedure resulted in complete and selective metal reduction at rates of 1.24 ± 0.01 mg/L-h for Cr(VI), 1.07 ± 0.01 mg/L-h for Cu(II), and 0.98 ± 0.01 mg/L-h for Cd(II). These reduction rates were larger than the no adaptive controls by factors of 2.5 for Cr(VI), 2.9 for Cu(II), and 3.6 for Cd(II). This adaptive procedure produced less diverse microbial communities and changes in the microbial communities at the phylum and genus levels. These results demonstrated that bacterial communities can adaptively evolve to utilize solutions containing mixtures of metals, providing a strategy for remediating wastewaters containing Cr(VI), Cu(II), and Cd(II).

Impact of multi-metals (Cd, Pb and Zn) exposure on the physiology of the yeast Pichia kudriavzevii

Metal contamination of the environment is frequently associated to the presence of two or more metals. This work aimed to study the impact of a mixture of metals (Cd, Pb and Zn) on the physiology of the non-conventional yeast Pichia kudriavzevii. The incubation of yeast cells with 5 mg/l Cd, 10 mg/l Pb and 5 mg/l Zn, for 6 h, induced a loss of metabolic activity (assessed by FUN-1 staining) and proliferation capacity (evaluated by a clonogenic assay), with a small loss of membrane integrity (measured by trypan blue exclusion assay). The staining of yeast cells with calcofluor white revealed that no modification of chitin deposition pattern occurred during the exposure to metal mixture. Extending for 24 h, the exposure of yeast cells to metal mixture provoked a loss of membrane integrity, which was accompanied by the leakage of intracellular components. A marked loss of the metabolic activity and the loss of proliferation capacity were also observed. The analysis of the impact of a single metal has shown that, under the conditions studied, Pb was the metal responsible for the toxic effect observed in the metal mixture. Intracellular accumulation of Pb seems to be correlated with the metals' toxic effects observed.

The synergistic toxicity of the multiple chemical mixtures: implications for risk assessment in the terrestrial environment

The combined toxicity of five insecticides (chlorpyrifos, avermectin, imidacloprid, λ-cyhalothrin, and phoxim), two herbicides (atrazine and butachlor) and a heavy metal (cadmium) has been examined with the earthworm acute toxicity test. Toxicological interactions of these chemicals in four, five, six, seven, and eight-component mixtures were studied using the combination-index (CI) equation method. In four-component and five-component mixtures, the synergistic effects predominated at lower effect levels, while the patterns of interactions found in six, seven, and eight-component mixtures displayed synergism. The λ-CY+IMI+BUT+ATR+CPF+PHO combination displayed the most strongly synergistic interaction, with CI values ranging from 0.09 to 0.15. The nature of the interaction changes with the effect level and the relevance of synergistic effects increase with the complexity of the mixture. The CI method was compared with the classical models of concentration addition (CA) and independent action (IA) and we found that the CI method could accurately predict the combined toxicity. The predicted synergism resulted from co-existence of the pesticides and the heavy metal especially at low effect levels may have important implications in risk assessment for the real terrestrial environment.

Plant-beneficial elements status assessment in soil-plant system in the vicinity of a chemical industry complex: shedding light on forage grass safety issues

Human health is closely linked with soils via plants, grazers, or plant-based products. This study estimated plant-beneficial elements (macronutrients: K, P; secondary macronutrients: Ca, Mg; micronutrients: Mo, Mn, Na, Ni, Se) in both soils and shoots of two forage grass species (Eriophorum angustifolium and Lolium perenne) prevalent in the vicinity of a chemical industry complex (Estarreja, Portugal). Both soils and plants from the chemical industrial areas exhibited differential concentrations of the studied elements. In soils, the role of contamination was evidenced as insignificant in context of its impact on all the tested macro and secondary macronutrients except P, and micronutrients such as Mo and Ni. In forage grass plant shoots, the role of contamination was evidenced as insignificant in relation to its impact on all the tested macro and secondary macronutrients except K. Between the two forage grass plants, high Se-harboring L. perenne cannot be recommended for its use as animal feed.

Metal uptake capacity of modified Saccharomyces pastorianus biomass from different types of solution

In this paper, we investigate the effect of different biomass pretreatments on metal ion uptake by various biosorbents. Heat-treated as well as caustic-treated and ground biomass of Saccharomyces pastorianus was used to remove copper, lead and cadmium from various solutions. Untreated yeast was used as the control sample. The effect of yeast modification on sorption capacity depended on the different types of heavy metal ions and whether they were in single- or multi-component solutions. The highest uptake of copper and lead from a single-metal solution was obtained from heat-treated cells. Ground biomass was the most efficient at cadmium removal. However, the sorption capacity of the modified biomass did not improve when metal ions were removed from multi-component solutions. Indeed, the results in this paper show that optimizing metal removal from single-cation solutions can lead to decreased sorption capacity in multi-component solutions. Therefore, while adjusting the procedure of biomass modification, not only the nature of the metal ion being sorbed but also the chemical composition of the metal ion solution should be taken into account.

Bio-prospecting of distillery yeasts as bio-control and bio-remediation agents

This work constitutes a preliminary study in which the capacity of non-Saccharomyces yeasts isolated from ancient distilleries as bio-control agents against moulds and in the treatment of waste waters contaminated by heavy metals-i.e. bio-remediation-is shown. In the first control assays, antagonist effect between non-Saccharomyces yeasts, their extracts and supernatants against some moulds, analysing the plausible (not exhaustive) involved factors were qualitatively verified. In addition, two enzymatic degrading properties of cell wall plant polymers, quitinolitic and pectinolitic, were screened. Finally, their use as agents of bio-remediation of three heavy metals (cadmium, chromium and lead) was analysed semi-quantitatively. The results showed that all isolates belonging to Pichia species effectively inhibited all moulds assayed. Moreover, P. kudriavzevii is a good candidate for both bio-control and bio-remediation because it inhibited moulds and accumulated the major proportion of the three tested metals.

Yeast and bacterial diversity along a transect in an acidic, As-Fe rich environment revealed by cultural approaches

Acid mine drainages (AMDs) are often thought to harbour low biodiversity, yet little is known about the diversity distribution along the drainages. Using culture-dependent approaches, the microbial diversity from the Carnoulès AMD sediment was investigated for the first time along a transect showing progressive environmental stringency decrease. In total, 20 bacterial genera were detected, highlighting a higher bacterial diversity than previously thought. Moreover, this approach led to the discovery of 16 yeast species, demonstrating for the first time the presence of this important phylogenetic group in this AMD. All in all, the location of the microbes along the transect helps to better understand their distribution in a pollution gradient.

Biosorption of Elements

Biosorption is a unique ability of living or dead biomass to interact with substances such as metals where reduction of sorbate concentration can be achieved. Thus, it has been widely proposed as a promising alternative for metal remediation and recovery owing to its low cost and sustainable “green” nature. Despite considerable biosorption‐related research performed in the past few decades, no significant commercial success has been achieved so far. This chapter starts with discussion of the basic science of biosorption and the potential of some selected biomasses such as yeast, algae, agro‐based waste and vermicompost to be used as biosorbent material. Following this, some important issues regarding the practical application of biosorption are highlighted, including the advantages and disadvantages of using dead or living biomass, the availability of biosorption reactors, immobilization techniques, metal recovery and post‐treatment of spent biosorbent. Lastly, current challenges that limit the commercial success of biosorption as well as the direction of future research are discussed.

Cleanup of industrial effluents containing heavy metals: a new opportunity of valorising the biomass produced by brewing industry

Heavy metal pollution is a matter of concern in industrialised countries. Contrary to organic pollutants, heavy metals are not metabolically degraded. This fact has two main consequences: its bioremediation requires another strategy and heavy metals can be indefinitely recycled. Yeast cells of Saccharomyces cerevisiae are produced at high amounts as a by-product of brewing industry constituting a cheap raw material. In the present work, the possibility of valorising this type of biomass in the bioremediation of real industrial effluents containing heavy metals is reviewed. Given the auto-aggregation capacity (flocculation) of brewing yeast cells, a fast and off-cost yeast separation is achieved after the treatment of metal-laden effluent, which reduces the costs associated with the process. This is a critical issue when we are looking for an effective, eco-friendly, and low-cost technology. The possibility of the bioremediation of industrial effluents linked with the selective recovery of metals, in a strategy of simultaneous minimisation of environmental hazard of industrial wastes with financial benefits from reselling or recycling the metals, is discussed.

Adaptive alterations in the fatty acids composition under induced oxidative stress in heavy metal-tolerant filamentous fungus Paecilomyces marquandii cultured in ascorbic acid presence

The ability of the heavy metal-tolerant fungus Paecilomyces marquandii to modulate whole cells fatty acid composition and saturation in response to IC50 of Cd, Pb, Zn, Ni, and Cu was studied. Cadmium and nickel caused the most significant growth reduction. In the mycelia cultured with all tested metals, with the exception of nickel, a rise in the fatty acid unsaturation was noted. The fungus exposure to Pb, Cu, and Ni led to significantly higher lipid peroxidation. P. marquandii incubated in the presence of the tested metals responded with an increase in the level of linoleic acid and escalation of electrolyte leakage. The highest efflux of electrolytes was caused by lead. In these conditions, the fungus was able to bind up to 100 mg g(-1) of lead, whereas the content of the other metals in the mycelium was significantly lower and reached from 3.18 mg g(-1) (Cu) to 15.21 mg g(-1) (Zn). Additionally, it was shown that ascorbic acid at the concentration of 1 mM protected fungal growth and prevented the changes in the fatty acid composition and saturation but did not alleviate lipid peroxidation or affect the increased permeability of membranes after lead exposure. Pro-oxidant properties of ascorbic acid in the copper-stressed cells manifested strong growth inhibition and enhanced metal accumulation as a result of membrane damage. Toxic metals action caused cellular modulations, which might contributed to P. marquandii tolerance to the studied metals. Moreover, these changes can enhance metal removal from contaminated environment.

Eriophorum angustifolium and Lolium perenne metabolic adaptations to metals- and metalloids-induced anomalies in the vicinity of a chemical industrial complex

As plants constitute the foundation of the food chain, concerns have been raised about the possibility of toxic concentrations of metals and metalloids being transported from plants to the higher food chain strata. In this perspective, the use of important phytotoxicity endpoints may be of utmost significance in assessing the hazardous nature of metals and metalloids and also in developing ecological soil screening levels. The current study aimed to investigate the role of glutathione (GSH) and its associated enzymes in the metabolic adaptation of two grass species namely Eriophorum angustifolium Honck. and Lolium perenne L. to metals and metalloids stress in the vicinity of a chemical industrial complex (Estarreja, Portugal). Soil and plant samples were collected from contaminated (C) and non-contaminated (reference, R) sites, respectively, near and away from the Estarreja Chemical Complex, Portugal. Soils (from 0 to 10 and 10 to 20 cm depths) were analyzed for pH, organic carbon, and metals and metalloids concentrations. Plant samples were processed fresh for physiological and biochemical estimations, while oven-dried plant samples were used for metals and metalloids determinations following standard methodologies. Both soils and plants from the industrial area exhibited differential concentrations of major metals and metalloids including As, Cu, Hg, Pb, and Zn. In particular, L. perenne shoot displayed significantly higher and lower concentrations of Pb and As, respectively at contaminated site (vs. E. angustifolium). Irrespective of sites, L. perenne shoot exhibited significantly higher total GSH pool, oxidized glutathione (GSSG) and oxidized protein (vs. E. angustifolium). Additionally, severe damages to photosynthetic pigments, proteins, cellular membrane integrity (in terms of electrolyte leakage), and lipid peroxidation were also perceptible in L. perenne shoot. Contrarily, irrespective of the sites, activities of catalase and GSH-regenerating enzyme, GSH reductase, and GSH-metabolizing enzymes such as GSH peroxidase and GSH sulfotransferase were significantly higher in shoot of E. angustifolium. Despite the higher total GSH content, L. perenne is vulnerable to multi-metals-induced stress in comparison to E. angustifolium as depicted by increased GSH- and protein oxidation, low reactive oxygen radical-processing potential (exhibited in terms of low catalase activity) and poor GSH pool utilization efficiency (in terms of lower GSH-associated enzymes activities). The outcome of the present study may be significant for understanding vital GSH-mediated metals and metalloids tolerance mechanisms in plants as well as their unsuitability for animal consumption due to higher metals and metalloids burdens.