Study of microbes having potentiality for biodegradation of plastics

Environmental fate and impacts of microplastics in aquatic ecosystems: a review

Wide usage of plastic products leads to the global occurrence of microplastics (MPs) in the aquatic environment. Due to the small size, they can be bio-ingested, which may cause certain health effects. The present review starts with summarizing the main sources of various types of MPs and their occurrences in the aquatic environment, as well as their transportation and degradation pathways. The analysis of migration of MPs in water environments shows that the ultimate fate of most MPs in water environments is cracked into small fragments and sinking into the bottom of the ocean. The advantages and disadvantages of existing methods for detection and analysis of MPs are summarized. In addition, based on recent researches, the present review discusses MPs as carriers of organic pollutants and microorganisms, and explores the specific effects of MPs on aquatic organisms in the case of single and combined pollutants. Finally, by analysing the causes and influencing factors of their trophic transfer, the impact of MPs on high-level trophic organisms is explored.

The sources, fate and impacts of microplastics in aquatic ecosystems.

Marine hydrocarbon-degrading bacteria breakdown poly(ethylene terephthalate) (PET)

Pollution of aquatic ecosystems by plastic wastes poses severe environmental and health problems and has prompted scientific investigations on the fate and factors contributing to the modification of plastics in the marine environment. Here, we investigated, by means of microcosm studies, the role of hydrocarbon-degrading bacteria in the degradation of poly(ethylene terephthalate) (PET), the main constituents of plastic bottles, in the marine environment. To this aim, different bacterial consortia, previously acclimated to representative hydrocarbons fractions namely, tetradecane (aliphatic fraction), diesel (mixture of hydrocarbons), and naphthalene/phenantrene (aromatic fraction), were used as inocula of microcosm experiments, in order to identify peculiar specialization in poly(ethylene terephthalate) degradation. Upon formation of a mature biofilm on the surface of poly(ethylene terephthalate) films, the bacterial biodiversity and degradation efficiency of each selected consortium was analyzed. Notably, significant differences on biofilm biodiversity were observed with distinctive hydrocarbons-degraders being enriched on poly(ethylene terephthalate) surface, such as Alcanivorax, Hyphomonas, and Cycloclasticus species. Interestingly, ATR-FTIR analyses, supported by SEM and water contact angle measurements, revealed major alterations of the surface chemistry and morphology of PET films, mainly driven by the bacterial consortia enriched on tetradecane and diesel. Distinctive signatures of microbial activity were the alteration of the FTIR spectra as a consequence of PET chain scission through the hydrolysis of the ester bond, the increased sample hydrophobicity as well as the formation of small cracks and cavities on the surface of the film. In conclusion, our study demonstrates for the first time that hydrocarbons-degrading marine bacteria have the potential to degrade poly(ethylene terephthalate), although their degradative activity could potentially trigger the formation of harmful microplastics in the marine environment.

Micro- and nanoplastics - current state of knowledge with the focus on oral uptake and toxicity

The production and use of plastics has constantly increased over the last 30 years. Over one third of the plastics is used in disposables, which are discarded within three years of their production. Despite efforts towards recycling, a substantial volume of debris has accumulated in the environment and is slowly degraded to micro- and nanoplastics by weathering and aging. It has recently been discovered that these small particles can enter the food chain, as for example demonstrated by the detection of microplastic particles in honey, beer, salt, sea food and recently in mineral water. Human exposure has further been documented by the detection of plastic microparticles in human feces. Potential toxic consequences of oral exposure to small plastic particles are discussed. Due to lacking data concerning exposure, biodistribution and related effects, the risk assessment of micro- and nanoplastics is still not possible. This review focuses on the oral uptake of plastic and polymer micro- and nanoparticles. Oral exposure, particle fate, changes of particle properties during ingestion and gastrointestinal digestion, and uptake and transport at the intestinal epithelium are reviewed in detail. Moreover, the interaction with intestinal and liver cells and possibly resulting toxicity are highlighted.

Are bacterial communities associated with microplastics influenced by marine habitats?

This study investigates the influence of marine habitats (i.e., the intertidal zone, supralittoral zone, and seawater), and polymer types (i.e., polyethylene, PE; polyethylene terephthalate, PET) on the diversity and structure of bacterial communities in marine microplastics. A three-month exposure experiment was conducted in Zhairuoshan Island, Zhoushan, China, a typical caldera volcanic island with minor anthropogenic disturbances. At the end of the exposure period, the transition for peaks corresponding to oxidized groups was observed using micro-Fourier transform infrared spectroscopy. Damages, including pits and cracks, and microorganisms were observed on the surfaces of the PE and PET pellets using scanning electron microscopy. Next-generation amplicon sequencing of the bacterial communities that had colonized the microplastics revealed that bacterial composition significantly varied depending on marine habitats and exposure times, rather than polymer type. Plastic debris in the intertidal zone exhibited the highest bacterial richness and diversity, and Bacillus was considered a potential degrader of plastic debris. The findings demonstrate that bacterial communities that colonize on microplastics are more potentially shaped by marine habitat and exposure time, and this would deepen our understanding of the ecological niche of microplastics surface.

A survey of intact low-density polyethylene film biodegradation by terrestrial Actinobacterial species

Low-density polyethylene (LDPE) polymer is mainly used in the production of plastic bags and food packaging making up the largest volume of plastic pollutions. These polymers are potential substrates for bacteria in the bioremediation process. In this study, soil samples were collected from different plastic landfills in Iran and subsequently enriched in specific media (polyethylene as carbon source) to increase the population of LDPE-degrading bacteria. Seventeen PE-degrading bacteria, some novel, were isolated from Iranian soil samples and identified using 16S rDNA gene sequencing. These isolates were capable of degrading PE in a limited incubation period without the need for physicochemical pretreatments and comprise mostly of Actinobacteria which include the three genera of Streptomyces, Nocardia, and Rhodococcus. The isolates belonged to 17 different species of gram-positive Actinobacteria. In all, 11 species of the genus Streptomyces, 3 species of the genus Rhodococcus, and 3 species of the genus Nocardia were identified. The isolates with less than 99% 16S rRNA gene similarity to previously known species were suspected to be new species. Various analyses (weight loss, SEM, FTIR, and tensile strength test) to determine polyethylene biodegradation rate were carried out after a 60-day incubation period. Analysis of polyethylene biodegradation elucidates that Actinobacteria have a high ability for biodegradation of polyethylene-based plastics. Streptomyces sp. IR-SGS-T10 showed the highest reduction in weight of the LDPE film (1.58 mg/g/day) after 60 days of incubation without any pretreatments. Rhodococcus sp. IR-SGS-T11 shows the best reduction in the tensile property of LDPE film, while results from FTIR study for Streptomyces sp. IR-SGS-Y1 indicated a significant change in structural analysis.

Metagenomic Exploration of Plastic Degrading Microbes for Biotechnological Application

Since the last few decades, the promiscuous and uncontrolled use of plastics led to the accumulation of millions of tons of plastic waste in the terrestrial and marine environment. It elevated the risk of environmental pollution and climate change. The concern arises more due to the reckless and unscientific disposal of plastics containing high molecular weight polymers, viz., polystyrene, polyamide, polyvinylchloride, polypropylene, polyurethane, and polyethylene, etc. which are very difficult to degrade. Thus, the focus is now paid to search for efficient, eco-friendly, low-cost waste management technology. Of them, degradation of non-degradable synthetic polymer using diverse microbial agents, viz., bacteria, fungi, and other extremophiles become an emerging option. So far, very few microbial agents and their secreted enzymes have been identified and characterized for plastic degradation, but with low efficiency. It might be due to the predominance of uncultured microbial species, which consequently remain unexplored from the respective plastic degrading milieu. To overcome this problem, metagenomic analysis of microbial population engaged in the plastic biodegradation is advisable to decipher the microbial community structure and to predict their biodegradation potential in situ. Advancements in sequencing technologies and bioinformatics analysis allow the rapid metagenome screening that helps in the identification of total microbial community and also opens up the scope for mining genes or enzymes (hydrolases, laccase, etc.) engaged in polymer degradation. Further, the extraction of the core microbial population and their adaptation, fitness, and survivability can also be deciphered through comparative metagenomic study. It will help to engineer the microbial community and their metabolic activity to speed up the degradation process.

Rapid biodegradation of polyphenylene sulfide plastic beads by Pseudomonas sp

Pseudomonas sp. isolated from soil, are bioremediating microorganisms that are capable of degrading various types of plastics. Polyphenylene sulfide (PPS) has the most excellent structural stability among general plastics and thus is extremely difficult to break down using physical or chemical methods. This study demonstrates the efficient biodegradation of PPS by Pseudomonas sp., which exists in the gut of superworms. Compared with the conventional film-type of plastic, the degradation efficiencies to the bead form of plastic were significantly improved and thus the biodegradation time was dramatically shortened. Therefore, instead of film-type plastics, we used 300 μm diameter plastic beads for the measurement of Pseudomonas sp.-mediated biodegradation of PPS during a 10-day period. This method not only can be used for comparison and verification of the biodegradation efficiency of different types of plastics within a short reaction time of 10 days, but also provides the possibility to develop a new and more efficient screening system to rapidly identify the most efficient species of bacteria for the biodegradation of various types of plastics.

PMBD: a Comprehensive Plastics Microbial Biodegradation Database

Since the invention over a hundred years ago, plastics have been used in many applications, and they are involved in every aspect of our lives. The extensive usage of plastics results in a tremendous amount of waste, which has become a severe burden on the environment. Several degradation approaches exist in nature to cope with ever-increasing plastic waste. Among these approaches, biodegradation by microorganisms has emerged as a natural way, which is favored by many environmentally conscious societies. To facilitate the study on biodegradation of plastics, we developed an online resource, Plastics Microbial Biodegradation Database (PMBD), to gather and present the information about microbial biodegradation of plastics. In this database, 949 microorganisms–plastics relationships and 79 genes involved in the biodegradation of plastics were manually collected and confirmed through literature searching. In addition, more than 8000 automatically annotated enzyme sequences, which were predicted to be involved in the plastics biodegradation, were extracted from the TrEMBL section of the UniProt database. The PMBD database is presented with a website at http://pmbd.genome-mining.cn/home. Data may be accessed through browsing or searching. Also included on the website are a sequence alignment tool and a function prediction tool.

Growing a circular economy with fungal biotechnology: a white paper

Fungi have the ability to transform organic materials into a rich and diverse set of useful products and provide distinct opportunities for tackling the urgent challenges before all humans. Fungal biotechnology can advance the transition from our petroleum-based economy into a bio-based circular economy and has the ability to sustainably produce resilient sources of food, feed, chemicals, fuels, textiles, and materials for construction, automotive and transportation industries, for furniture and beyond. Fungal biotechnology offers solutions for securing, stabilizing and enhancing the food supply for a growing human population, while simultaneously lowering greenhouse gas emissions. Fungal biotechnology has, thus, the potential to make a significant contribution to climate change mitigation and meeting the United Nation’s sustainable development goals through the rational improvement of new and established fungal cell factories. The White Paper presented here is the result of the 2nd Think Tank meeting held by the EUROFUNG consortium in Berlin in October 2019. This paper highlights discussions on current opportunities and research challenges in fungal biotechnology and aims to inform scientists, educators, the general public, industrial stakeholders and policymakers about the current fungal biotech revolution.

Polyester-based biodegradable plastics: an approach towards sustainable development

Non-degradability of conventional plastics, filling of landfill sites, raising water and land pollution and rapid depletion of fossil resources have raised the environmental issues and global concerns. The current demand and production of plastics is putting immense pressure on fossil resources, consuming about 6% of the global oil and is expected to grow up to 20%. The polyester-based biodegradable plastics (BPs) are considered as a remedy to the issue of plastics waste in the environment. BPs appear to manage the overflow of plastics by providing new means of waste management system and help in securing the non-renewable resources of nature. This review comprehensively presents the environmental burdens due to conventional plastics as well as production of polyester-based BPs as an alternative to conventional commodity plastics. The diversity of micro-organisms and their enzymes that degrade various polyester-based BPs (PLA, PCL, PHB/PHBV and PET) has also been described in detail. Moreover, the impact of plastics degradation products on soil ecology and ecosystem functions has critically been discussed. The report ends with special focus on future recommendations for the development of sustainable waste management strategies to control pollution due to plastics waste. SIGNIFICANCE AND IMPACT OF THE STUDY: Polyester-based BPs considered as a solution to current plastic waste problem as well as leading polymers in terms of biodegradability and sustainability has been critically discussed. The role of microorganisms and their enzymes involved in the biodegradation of these polymers and ecotoxicological impact of degradation products of BPs on soil microbial community and biogeochemical cycles has also been described. This report will provide an insight on the key research areas to bridge the gap for development of simulated systems as an effective and emerging strategy to divert the overflow of plastic in the environment as well as for the greener solution to the plastic waste management problems.

Potent Impact of Plastic Nanomaterials and Micromaterials on the Food Chain and Human Health

Plastic products are inexpensive, convenient, and are have many applications in daily life. We overuse plastic-related products and ineffectively recycle plastic that is difficult to degrade. Plastic debris can be fragmented into smaller pieces by many physical and chemical processes. Plastic debris that is fragmented into microplastics or nanoplastics has unclear effects on organismal systems. Recently, this debris was shown to affect biota and to be gradually spreading through the food chain. In addition, studies have indicated that workers in plastic-related industries develop many kinds of cancer because of chronic exposure to high levels of airborne microplastics. Microplastics and nanoplastics are everywhere now, contaminating our water, air, and food chain. In this review, we introduce a classification of plastic polymers, define microplastics and nanoplastics, identify plastics that contaminate food, describe the damage and diseases caused by microplastics and nanoplastics, and the molecular and cellular mechanisms of this damage and disease as well as solutions for their amelioration. Thus, we expect to contribute to the understanding of the effects of microplastics and nanoplastics on cellular and molecular mechanisms and the ways that the uptake of microplastics and nanoplastics are potentially dangerous to our biota. After understanding the issues, we can focus on how to handle the problems caused by plastic overuse.

Marine Microbial Assemblages on Microplastics: Diversity, Adaptation, and Role in Degradation

We have known for more than 45 years that microplastics in the ocean are carriers of microbially dominated assemblages. However, only recently has the role of microbial interactions with microplastics in marine ecosystems been investigated in detail. Research in this field has focused on three main areas: (a) the establishment of plastic-specific biofilms (the so-called plastisphere); (b) enrichment of pathogenic bacteria, particularly members of the genus Vibrio, coupled to a vector function of microplastics; and (c) the microbial degradation of microplastics in the marine environment. Nevertheless, the relationships between marine microorganisms and microplastics remain unclear. In this review, we deduce from the current literature, new comparative analyses, and considerations of microbial adaptation concerning plastic degradation that interactions between microorganisms and microplastic particles should have rather limited effects on the ocean ecosystems. The majority of microorganisms growing on microplastics seem to belong to opportunistic colonists that do not distinguish between natural and artificial surfaces. Thus, microplastics do not pose a higher risk than natural particles to higher life forms by potentially harboring pathogenic bacteria. On the other hand, microplastics in the ocean represent recalcitrant substances for microorganisms that are insufficient to support prokaryotic metabolism and will probably not be microbially degraded in any period of time relevant to human society. Because we cannot remove microplastics from the ocean, proactive action regarding research on plastic alternatives and strategies to prevent plastic entering the environment should be taken promptly.

Poly(hydroxy acids) derived from the self-condensation of hydroxy acids: from polymerization to end-of-life options

Poly(hydroxy acids) derived from the self-condensation of hydroxy acid are biodegradable and can be fully recycled in a Circular Economy approach.

Bacterial Candidates for Colonization and Degradation of Marine Plastic Debris

With the rising plastic pollution in the oceans, research on the plastisphere-the microorganisms interacting with marine plastic debris-has emerged. Microbial communities colonizing plastic have been characterized from several ocean regions and they are distinct from the communities of the surrounding waters, and a few plastic-degrading microorganisms have been isolated from other environments. Therefore, we propose that marine microorganisms have adapted to plastic as a surface for colonization and potentially degradation. When comparing the taxonomic patterns of plastic-associated, marine bacteria, recurring groups and families such as the families Erythrobacteraceae and Rhodobacteraceae (Alphaproteobacteria), Flavobacteriaceae (Bacteriodetes), and the phylum of cyanobacteria (such as the Phormidium genus) can be identified. Thereby, we provide a perspective on which bacterial candidates could play a role in the colonization and possible degradation of plastic in the oceans due to their occurrence on marine plastic debris. We emphasize the need for extended and reproducible collection of data to assess the existence of a core microbiome or core functionalities of the plastisphere and confirm the capability of these bacterial candidates for biodegradation of plastic. Furthermore, we suggest the next steps in research to elucidate the level of natural bioremediation and the exploitation of bacterial degradative mechanisms of plastic.

Biodegradation of oil-based plastics in the environment: Existing knowledge and needs of research and innovation

The production of synthetic oil-based plastics has led to the accumulation of huge amounts of the plastic waste in the environment, especially in the marine system, very often the final sink for many types of conventional wasted plastics. In particular, (micro)plastics account for the majority of litter items in the marine environment and a high percentage of such litter is originating from land sources. Attempts to mitigate the harmful effects of conventional plastics such as the development of novel management strategies together with the gradual substitution of them with biodegradable (bio)plastics are representing future solutions. However, high amounts of conventional plastics have been accumulating in the environment since several years. Although many studies reported on their potential biodegradation by microbes in and from terrestrial environments, very little is known about the biodegradability of these plastics in freshwater systems and only recently more reports on their biodegradation by marine microorganisms/in marine environment were made available. In this review, we first provide a summary of the approaches applied for monitoring and assessing conventional plastics biodegradation under defined conditions. Then, we reviewed historical and recent findings related to biodegradation of four major plastics produced in European Union (EU), i.e. Polyethylene, Polyvinyl Chloride, Polypropylene and Polystyrene, in terrestrial and aquatic environments and by pure and mixed microbial cultures obtained from them.

Unprecedented high percentage of food waste powder filler in poly lactic acid green composites: synthesis, characterization, and volatile profile

The attractive qualities of plastics lead us, around the world, to an enormous need for plastic goods, which results in their unsustainable overconsumption. Bio-based products are the core concept of circular economy, yet this sector suffers from the high cost of their production. In practice, biopolymers, such as polylactic acid (PLA), are still limitedly used, due to their expensiveness and not outstanding technological properties. A circular and sustainable solution would be to use waste from the food industry as filler that contributes to reduce the cost of PLA-based materials, thereby encouraging their widespread use. At the same time, this would be a circular approach to wisely upgrade food waste and prevent pollution. Ceramic food waste powder fillers from egg shells and from mussel shells were compounded with PLA at 180 °C to obtain composites, which contain an unprecedented high amount of filler, equal to 140 over 100 parts of PLA. We analyzed volatile organic compounds emitted from PLA and, for the very first time, from its composites via headspace-solid phase microextraction-gas chromatography-mass spectrometry (HS-SPME-GC-MS). The molecular fingerprint of the volatiles comprises only three aldehydes, a ketone, and two lactides. Volatiles typical of fossil plastics, that are causative factors of hormone disruption or reproductive dysfunction, are effectively missing. Scanning electron microscopy, used to examine the structure of the composite, indicates that both the egg shells and the mussel shells are suitable fillers, in that they form a sufficiently strong interface with the polymer.

Destabilization of polyethylene and polyvinylchloride structure by marine bacterial strain

Plastics are recalcitrant and inert to degrade, and destabilization leads to accumulate in the terrestrial and marine ecosystems; need for the development of strategies for reducing these plastic wastes in a sustainable manner would be revolutionary. We studied the bacterial adherence, degradation and destabilization of polyvinylchloride (PVC), low-density polyethylene (LDPE), and high-density polyethylene (HDPE) by marine bacterial strain AIIW2 by a series of analytical and microscopic observations over 3 months. Based on 16S rRNA gene sequence and the phylogenetic analysis of the strain AIIW2, it showed 97.39% similarity with Bacillus species. Degradation of plastics was determined by the weight loss after 90 days with bacterial strain which detected up to 0.26 ± 0.02, 0.96 ± 0.02, and 1.0 ± 0.01% for PVC, LDPE, and HDPE films, respectively over initial weights. The mineralization of plastic film was found to be maximum in LDPE followed by HDPE and PVC. Bacterial interaction had increased roughness and deteriorated the surface of plastics which is revealed by the scanning electron microscope and atomic force microscope. Bending vibrations of the alkane rock chain (-CH₂ and -CH₃) and carbonyl (-CO) regions in LDPE and HDPE films, while there was slight stretching in the hydroxyl (-OH) regions of carboxylic acid in PVC which is evidenced through Fourier transform infrared spectral studies, suggested the oxidative activities of the bacteria. Though, the bacterial activity was higher on the LDPE and HDPE than PVC film which may be due to the presence of chlorine atom in PVC structure making it more versatile. The results of the present study revealed the ability of marine bacterial strain for instigating their colonization over plastic films and deteriorating the polymeric structure.

Efficient biodegradation of low-density polyethylene by cyanobacteria isolated from submerged polyethylene surface in domestic sewage water

Two dominant cyanobacterial species, Phormidium lucidum and Oscillatoria subbrevis, isolated from submerged polyethylene carry bags in domestic sewage water were found to be capable of degrading low-density polyethylene (LDPE) sheets efficiently. The FT-IR, SEM, NMR, CHN content, thermal, and tensile strength of PE were monitored for structural, morphological, and chemical changes of PE. The CHN analysis corroborated about 4% carbon utilization by the cyanobacterial species from the PE. The rapid growth of cyanobacterial species on the PE surface suggested that the microorganisms continued to gain energy from the PE. The reduction in lamellar thickness, weight, and crystallinity of the cyanobacterial-treated PE pointed to an efficient biodegradation process without any pro-oxidant additives or pretreatment. Alteration in bond indices computed from FT-IR spectroscopy revealed changes in functional group and side chain features indicating biodegradation. The enhanced laccase and manganese peroxidase activity corroborated the biodegradation. The ¹³C-NMR spectroscopy of the PE is consistent with short branching providing further evidence of biodegradation. Scanning electron microscopy and optical microscopy exhibited large grooves on the surface suggesting significant disruption of polyethylene structure.

Ability of fungi isolated from plastic debris floating in the shoreline of a lake to degrade plastics

Plastic waste in the environment is a significant threat due to its resistance to biological processes. Here we report the ability of fungal strains found on floating plastic debris to degrade plastics. In particular, we wanted to know which fungi grow on plastic debris floating in the shoreline, whether these fungi have the ability to degrade plastics, whether the plastic-degrading fungi can degrade other complex C-polymers such as lignin, and whether lignin-degraders vice versa can also break down plastics. Overall, more than a hundred fungal strains were isolated from plastic debris of the shoreline of Lake Zurich, Switzerland, and grouped morphologically. Representative strains of these groups were then selected and genetically identified, altogether twelve different fungal species and one species of Oomycota. The list of fungi included commonly occurring saprotrophic fungi but also some plant pathogens. These fungal strains were then used to test the ability to degrade polyethylene and polyurethane. The tests showed that none of the strains were able to degrade polyethylene. However, four strains were able to degrade polyurethane, the three litter-saprotrophic fungi Cladosporium cladosporioides, Xepiculopsis graminea, and Penicillium griseofulvum and the plant pathogen Leptosphaeria sp. A series of additional fungi with an origin other than from plastic debris were tested as well. Here, only the two litter-saprotrophic fungi Agaricus bisporus and Marasmius oreades showed the capability to degrade polyurethane. In contrast, wood-saprotrophic fungi and ectomycorrhizal fungi were unable to degrade polyurethane. Overall, it seems that in majority only a few litter-saprotrophic fungi, which possess a wide variety of enzymes, have the ability to degrade polyurethane. None of the fungi tested was able to degrade polyethylene.

Population dynamics of synthetic terraformation motifs

Ecosystems are complex systems, currently experiencing several threats associated with global warming, intensive exploitation and human-driven habitat degradation. Because of a general presence of multiple stable states, including states involving population extinction, and due to the intrinsic nonlinearities associated with feedback loops, collapse in ecosystems could occur in a catastrophic manner. It has been recently suggested that a potential path to prevent or modify the outcome of these transitions would involve designing synthetic organisms and synthetic ecological interactions that could push these endangered systems out of the critical boundaries. In this paper, we investigate the dynamics of the simplest mathematical models associated with four classes of ecological engineering designs, named Terraformation motifs (TMs). These TMs put in a nutshell different ecological strategies. In this context, some fundamental types of bifurcations pervade the systems' dynamics. Mutualistic interactions can enhance persistence of the systems by means of saddle-node bifurcations. The models without cooperative interactions show that ecosystems achieve restoration through transcritical bifurcations. Thus, our analysis of the models allows us to define the stability conditions and parameter domains where these TMs must work.

Biodegradation of Poly(3-hydroxybutyrate- co-3-hydroxyhexanoate) Plastic under Anaerobic Sludge and Aerobic Seawater Conditions: Gas Evolution and Microbial Diversity

Poly(3-hydroxybutyrate- co-3-hydroxyhexanoate) (poly(3HB- co-3HHx)) thermoplastics are a promising biodegradable alternative to traditional plastics for many consumer applications. Biodegradation measured by gaseous carbon loss of several types of poly(3HB- co-3HHx) plastic was investigated under anaerobic conditions and aerobic seawater environments. Under anaerobic conditions, the biodegradation levels of a manufactured sheet of poly(3HB- co-3HHx) and cellulose powder were not significantly different from one another over 85 days with 77.1 ± 6.1 and 62.9 ± 19.7% of the carbon converted to gas, respectively. However, the sheet of poly(3HB- co-3HHx) had significantly higher methane yield ( p ≤ 0.05), 483.8 ± 35.2 mL·g^-1 volatile solid (VS), compared to cellulose controls, 290.1 ± 92.7 mL·g^-1 VS, which is attributed to a greater total carbon content. Under aerobic seawater conditions (148-195 days at room temperature), poly(3HB- co-3HHx) sheets were statistically similar to cellulose for biodegradation as gaseous carbon loss (up to 83% loss in about 6 months), although the degradation rate was lower than that for cellulose. The microbial diversity was investigated in both experiments to explore the dominant bacteria associated with biodegradation of poly(3HB- co-3HHx) plastic. For poly(3HB- co-3HHx) treatments, Cloacamonales and Thermotogales were enriched under anaerobic sludge conditions, while Clostridiales, Gemmatales, Phycisphaerales, and Chlamydiales were the most enriched under aerobic seawater conditions.

Biodegradation of plastics: current scenario and future prospects for environmental safety

Plastic is a general term used for a wide range of high molecular weight organic polymers obtained mostly from the various hydrocarbon and petroleum derivatives. There is an ever-increasing trend towards the production and consumption of plastics due to their extensive industrial and domestic applications. However, a wide spectrum of these polymers is non-biodegradable with few exceptions. The extensive use of plastics, lack of waste management, and casual community behavior towards their proper disposal pose a significant threat to the environment. This has raised growing concerns among various stakeholders to devise policies and innovative strategies for plastic waste management, use of biodegradable polymers especially in packaging, and educating people for their proper disposal. Current polymer degradation strategies rely on chemical, thermal, photo, and biological procedures. In the presence of proper waste management strategies coupled with industrially controlled biodegradation facilities, the use of biodegradable plastics for some applications such as packaging or health industry is a promising and attractive option for economic, environmental, and health benefits. This review highlights the classification of plastics with special emphasis on biodegradable plastics and their rational use, the identified mechanisms of plastic biodegradation, the microorganisms involved in biodegradation, and the current insights into the research on biodegradable plastics. The review has also identified the research gaps in plastic biodegradation followed by future research directions.

Microplastics as a vector for the transport of the bacterial fish pathogen species Aeromonas salmonicida

Microplastics is widespread in the marine environment where it can cause numerous negative effects. It can provide space for the growth of organisms and serves as a vector for the long distance transfer of marine microorganisms. In this study, we examined the sea surface concentrations of microplastics in the North Adriatic and characterized bacterial communities living on the microplastics. DNA from microplastics particles was isolated by three different methods, followed by PCR amplification of 16S rDNA, clone libraries preparation and phylogenetic analysis. 28 bacterial species were identified on the microplastics particles including Aeromonas spp. and hydrocarbon-degrading bacterial species. Based on the 16S rDNA sequences the pathogenic fish bacteria Aeromonas salmonicida was identified for the first time on microplastics. Because A. salmonicida is responsible for illnesses in fish, it is crucial to get answers if and how microplastics pollution is responsible for spreading of diseases.

Screening of Bacillus strains isolated from mangrove ecosystems in Peninsular Malaysia for microplastic degradation

The continuous accumulation of microplastics in the environment poses ecological threats and has been an increasing problem worldwide. In this study, eight bacterial strains were isolated from mangrove sediment in Peninsular Malaysia to mitigate the environmental impact of microplastics and develop a clean-up option. The bacterial isolates were screened for their potential to degrade UV-treated microplastics from polyethylene (PE), polyethylene terephthalate (PET), polypropylene (PP), and polystyrene (PS). Only two isolates, namely, Bacillus cereus and Bacillus gottheilii, grew on a synthetic medium containing different microplastic polymers as the sole carbon source. A shake flask experiment was carried out to further evaluate the biodegradability potential of the isolates. Degradation was monitored by recording the weight loss of microplastics and the growth pattern of the isolates in the mineral medium. The biodegradation extent was validated by assessment of the morphological and structural changes through scanning electron microscopy and Fourier transform infrared spectroscopy analyses. The calculated weight loss percentages of the microplastic particles by B. cereus after 40 days were 1.6%, 6.6%, and 7.4% for PE, PET, and PS, respectively. B. gottheilii recorded weight loss percentages of 6.2%, 3.0%, 3.6%, and 5.8% for PE, PET, PP, and PS, respectively. The designated isolates degraded the microplastic material and exhibited potential for remediation of microplastic-contaminated environment. Biodegradation tests must be conducted to characterize the varied responses of microbes toward pollutants, such as microplastics. Hence, a novel approach for biodegradation of microplastics must be developed to help mitigate the environmental impact of plastics and microplastic polymers.

Plastics in the North Atlantic garbage patch: A boat-microbe for hitchhikers and plastic degraders

Plastic is a broad name given to different polymers with high molecular weight that impact wildlife. Their fragmentation leads to a continuum of debris sizes (meso to microplastics) entrapped in gyres and colonized by microorganisms. In the present work, the structure of eukaryotes, bacteria and Archaea was studied by a metabarcoding approach, and statistical analysis associated with network building was used to define a core microbiome at the plastic surface. Most of the bacteria significantly associated with the plastic waste originated from non-marine ecosystems, and numerous species can be considered as hitchhikers, whereas others act as keystone species (e.g., Rhodobacterales, Rhizobiales, Streptomycetales and Cyanobacteria) in the biofilm. The chemical analysis provides evidence for a specific colonization of the polymers. Alphaproteobacteria and Gammaproteobacteria significantly dominated mesoplastics consisting of poly(ethylene terephthalate) and polystyrene. Polyethylene was also dominated by these bacterial classes and Actinobacteria. Microplastics were made of polyethylene but differed in their crystallinity, and the majorities were colonized by Betaproteobacteria. Our study indicated that the bacteria inhabiting plastics harboured distinct metabolisms from those present in the surrounding water. For instance, the metabolic pathway involved in xenobiotic degradation was overrepresented on the plastic surface.

Distribution and importance of microplastics in the marine environment: A review of the sources, fate, effects, and potential solutions

The presence of microplastics in the marine environment poses a great threat to the entire ecosystem and has received much attention lately as the presence has greatly impacted oceans, lakes, seas, rivers, coastal areas and even the Polar Regions. Microplastics are found in most commonly utilized products (primary microplastics), or may originate from the fragmentation of larger plastic debris (secondary microplastics). The material enters the marine environment through terrestrial and land-based activities, especially via runoffs and is known to have great impact on marine organisms as studies have shown that large numbers of marine organisms have been affected by microplastics. Microplastic particles have been found distributed in large numbers in Africa, Asia, Southeast Asia, India, South Africa, North America, and in Europe. This review describes the sources and global distribution of microplastics in the environment, the fate and impact on marine biota, especially the food chain. Furthermore, the control measures discussed are those mapped out by both national and international environmental organizations for combating the impact from microplastics. Identifying the main sources of microplastic pollution in the environment and creating awareness through education at the public, private, and government sectors will go a long way in reducing the entry of microplastics into the environment. Also, knowing the associated behavioral mechanisms will enable better understanding of the impacts for the marine environment. However, a more promising and environmentally safe approach could be provided by exploiting the potentials of microorganisms, especially those of marine origin that can degrade microplastics.

CAPSULE

The concentration, distribution sources and fate of microplastics in the global marine environment were discussed, so also was the impact of microplastics on a wide range of marine biota.

Environmental performance of bio-based and biodegradable plastics: the road ahead

This review provides a critical discussion as to the future direction of plastic materials, including balancing factors such as biodegradability and longevity, effects of additive compounds, feedstock developments, and environmental considerations.

Plastic waste in the marine environment: A review of sources, occurrence and effects

This review article summarises the sources, occurrence, fate and effects of plastic waste in the marine environment. Due to its resistance to degradation, most plastic debris will persist in the environment for centuries and may be transported far from its source, including great distances out to sea. Land- and ocean-based sources are the major sources of plastic entering the environment, with domestic, industrial and fishing activities being the most important contributors. Ocean gyres are particular hotspots of plastic waste accumulation. Both macroplastics and microplastics pose a risk to organisms in the natural environment, for example, through ingestion or entanglement in the plastic. Many studies have investigated the potential uptake of hydrophobic contaminants, which can then bioaccumulate in the food chain, from plastic waste by organisms. To address the issue of plastic pollution in the marine environment, governments should first play an active role in addressing the issue of plastic waste by introducing legislation to control the sources of plastic debris and the use of plastic additives. In addition, plastics industries should take responsibility for the end-of-life of their products by introducing plastic recycling or upgrading programmes.