Modulation of anisotropy in electrospun tissue-engineering scaffolds: Analysis of fiber alignment by the fast Fourier transform

Computationally optimizing the compliance of multilayered biomimetic tissue engineered vascular grafts

Coronary artery bypass grafts used to treat coronary artery disease often fail due to compliance mismatch. In this study, we have developed an experimental/computational approach to fabricate an acellular biomimetic hybrid tissue engineered vascular graft composed of alternating layers of electrospun porcine gelatin/polycaprolactone (PCL) and human tropoelastin/PCL blends with the goal of compliance-matching to rat abdominal aorta, while maintaining specific geometrical constraints. Polymeric blends at three different gelatin:PCL (G:PCL) and tropoelastin:PCL (T:PCL) ratios (80:20, 50:50 and 20:80) were mechanically characterized. The stress-strain data was used to develop predictive models, which were used as part of an optimization scheme that was implemented to determine the ratios of G:PCL and T:PCL and the thickness of the individual layers within a tissue engineered vascular graft that would compliance match a target compliance value. The hypocompliant, isocompliant, and hypercompliant grafts had target compliance values of 0.000256, 0.000568 and 0.000880 mmHg-1, respectively. Experimental validation of the optimization demonstrated that the hypercompliant and isocompliant grafts were not statistically significant from their respective target compliance values (p-value=0.37 and 0.89, respectively). The experimental compliance value of the hypocompliant graft was statistically significant than their target compliance value (p-value=0.047). We have successfully demonstrated a design optimization scheme that can be used to fabricate multilayered and biomimetic vascular grafts with targeted geometry and compliance.

A facile method for fabricating a three-dimensional aligned fibrous scaffold for vascular application

Collection of circumferentially aligned and 3D fibrous scaffold on a newly designed electrospinning auxiliary jig. The aligned fibres served as a signaling modality to induce cell alignment and the maintenance of a contractile phenotype for hSMCs.

Influence of Nanofiber Orientation on Morphological and Mechanical Properties of Electrospun Chitosan Mats

This work explored the use of chitosan (Cs) and poly(ethylene oxide) (PEO) blends for the fabrication of electrospun fiber-orientated meshes potentially suitable for engineering fiber-reinforced soft tissues such as tendons, ligaments, or meniscus. To mimic the fiber alignment present in native tissue, the CS/PEO blend solution was electrospun using a traditional static plate, a rotating drum collector, and a rotating disk collector to get, respectively, random, parallel, circumferential-oriented fibers. The effects of the different orientations (parallel or circumferential) and high-speed rotating collector influenced fiber morphology, leading to a reduction in nanofiber diameters and an improvement in mechanical properties.

Tenogenically differentiated adipose-derived stem cells are effective in Achilles tendon repair in vivo

The purpose of this study was to characterize rat adipose-derived stem cells, induce adipose-derived stem cell tenogenesis, and analyze adipose-derived stem cell effects on tendon repair in vivo. Adipose-derived stem cells demonstrated an immunomodulatory, pro-angiogenic, and pro-proliferatory profile in vitro. Tenogenesis was induced for 1, 7, 14, and 21 days with 24 combinations of growth differentiation factor-5, 6, and 7 and platelet-derived growth factor–BB. Adipose-derived stem cells expression of scleraxis and collagen type I increased the most after 14 days of induction with growth differentiation factor-6 and platelet-derived growth factor–BB. Achilles excision defects injected with hydrogel alone (Gp2), with undifferentiated (Gp3) adipose-derived stem cells, or tenogenically differentiated (Gp4) adipose-derived stem cells exhibited improved tissue repair compared with untreated tendons (Gp1). Addition of adipose-derived stem cells improved tissue cytoarchitecture and increased expression of collagen type I and III, scleraxis, and tenomodulin. Adipose-derived stem cells significantly improved biomechanical properties (ultimate load and elastic toughness) over time more than hydrogel alone, while tenogenically differentiated adipose-derived stem cells improved the mean histological score and collagen fiber dispersion range closest to normal tendon. In addition, tendon sections treated with GFP-adipose-derived stem cells exhibited green fluorescence and positive GFP immunostaining on microscopy confirming the in vivo survival of adipose-derived stem cells that were injected into tendon defects to support the effects of adipose-derived stem cells on tissue up to 4.5 weeks post injury.

Printed Nanocomposite Energy Harvesters with Controlled Alignment of Barium Titanate Nanowires

Piezoelectric nanocomposites are commonly used in the development of self-powered miniaturized electronic devices and sensors. Although the incorporation of one-dimensional (1D) piezoelectric nanomaterials (i.e., nanowires, nanorods, and nanofibers) in a polymer matrix has led to the development of devices with promising energy harvesting and sensing performance, they have not yet reached their ultimate performance due to the challenges in fabrication. Here, a direct-write additive manufacturing technique is utilized to facilitate the fabrication of spatially tailored piezoelectric nanocomposites. High aspect ratio barium titanate (BaTiO₃) nanowires (NWs) are dispersed in a polylactic acid (PLA) solution to produce a printable piezoelectric solution. The BaTiO₃ NWs are arranged in PLA along three different axes of alignment via shear-induced alignment during a controlled printing process. The result of electromechanical characterizations shows that the nanowire alignment significantly affects the energy harvesting performance of the nanocomposites. The optimal power output can be enhanced by as much as eight times for printed nanocomposites with a tailored architecture of the embedded nanostructures. This power generation capacity is 273% higher compared to conventional cast nanocomposites with randomly oriented NWs. The findings of this study suggest that 3D printing of nanowire-based nanocomposites is a feasible, scalable, and rapid methodology to produce high-performance piezoelectric transducers with tailored micro- and nanostructures. This study offers the first demonstration of nanocomposite energy harvesters with spatially controlled filler orientation realized directly from a digital design.

Platelet-rich plasma and alignment enhance myogenin via ERK mitogen activated protein kinase signaling

Volumetric muscle loss is debilitating and involves extensive rehabilitation. One approach to accelerate healing, rehabilitation, and muscle function is to repair damaged skeletal muscle using regenerative medicine strategies. In sports medicine and orthopedics, a common clinical approach is to treat minor to severe musculoskeletal injuries with platelet-rich plasma (PRP) injections. While these types of treatments have become commonplace, there are limited data demonstrating their effectiveness. The goal of this study was to determine the effect of PRP on myoblast gene expression and protein production when incorporated into a polymer fiber. To test this, we generated extracellular matrix mimicking scaffolds using aligned polydioxanone (PDO) fibers containing lyophilized PRP (SmartPReP^® 2, Harvest Technologies Corporation, Plymouth, MA). Scaffolds with PRP caused a dose-dependent increase in myogenin and myosin heavy chain but did not affect myogenic differentiation factor-1 (MyoD). Integrin α7β1D decreased and α5β1A did not change in response to PRP scaffolds. ERK inhibition decreased myogenin and increased Myod on the PDO-PRP scaffolds. Taken together, these data suggest that alignment and PRP produce a substrate-dependent, ERK-dependent, and dose-dependent effect on myogenic differentiation.

Quantitative Analysis on Ex Vivo Nonlinear Microscopy Images of Basal Cell Carcinoma Samples in Comparison to Healthy Skin

Basal cell carcinoma (BCC) is the most frequent malignant neoplasm in the Caucasian population. There are several therapeutic options for BCC, but surgical excision is considered gold standard treatment. As BCCs often have poorly defined borders, the clinical assessment of the tumor margins can be challenging. Therefore, there is an increasing demand for efficient in vivo imaging techniques for the evaluation of tumor borders prior to and during surgeries. In the near future, nonlinear microscopy techniques might meet this demand. We measured the two-photon excitation fluorescence (TPEF) signal of nicotinamide adenine dinucleotide hydride (NADH) and elastin and second harmonic generation (SHG) signal of collagen on 10 ex vivo healthy control and BCC skin samples and compared the images by different quantitative image analysis methods. These included integrated optical density (IOD) measurements on TPEF and SHG images and application of fast Fourier transform (FFT), CT-FIRE and CurveAlign algorithms on SHG images to evaluate the collagen structure. In the BCC samples, we found significantly lower IOD of both the TPEF and SHG signals and higher collagen orientation index utilizing FFT. CT-FIRE algorithm revealed increased collagen fiber length and decreased fiber angle while CurveAlign detected higher fiber alignment of collagen fibers in BCC. These results are in line with previous findings which describe pronounced changes in the collagen structure of BCC. In the future, these novel image analysis methods could be integrated in handheld nonlinear microscope systems, for sensitive and specific identification of BCC.

A nano-fibrous platform of copolymer patterned surfaces for controlled cell alignment

The last decade has witnessed great progress in understanding and manipulating self-assembly of block copolymers in solution. A wide variety of micellar structures can be created and many promising applications in bioscience have been reported. In particular, nano-fibrous micelles provide a great platform to mimic the filamentous structure of native extracellular matrix (ECM). However, the evaluation of this kind of filomicellar system with potential use in tissue engineering is virtually unexplored. The question behind it, such as if the block copolymer nano-fibrous micelles can regulate cellular response, has lingered for many years because of the difficulties in preparation and 3D manipulation of these tiny objects. Here, by using a combination approach of self-assembly of block copolymers and soft lithography, we establish a novel and unique nano-fibrous 2D platform of organized micelles and demonstrate that patterned micelles enable control over the cellular alignment behavior. The area density and orientation of fibrous micelles determine the alignment degree and directionality of cells, respectively. Furthermore, when cells were cultured on multi-directionally aligned micelles, a competitive response was observed. Due to the virtually infinite possibilities of functionalization of the micelle corona, our work opens a new route to further mimic the native fibrous networks with artificial micelles containing various functionalities.

The Biophysics of 3D Cell Migration

Three-dimensional (3D) cell culture systems have gained increasing interest not only for 3D migration studies but also for their use in drug screening, tissue engineering, and ex vivo modeling of metastatic behavior in the field of cancer biology and morphogenesis in the field of developmental biology. The goal of studying cells in a 3D context is to attempt to more faithfully recapitulate the physiological microenvironment of tissues, including mechanical and structural parameters that we envision will reveal more predictive data for development programs and disease states. In this review, we discuss the pros and cons of several well-characterized 3D cell culture systems for performing 3D migration studies. We discuss the intracellular and extracellular signaling mechanisms that govern cell migration. We also describe the mathematical models and relevant assumptions that can be used to describe 3D cell movement.

Influence of the nanofiber chemistry and orientation of biodegradable poly(butylene succinate)-based scaffolds on osteoblast differentiation for bone tissue regeneration

Innovative nanofibrous scaffolds have attracted considerable attention in bone tissue engineering, due to their ability to mimic the hierarchical architecture of an extracellular matrix. Aiming at investigating how the polymer chemistry and fiber orientation of electrospun scaffolds (ES) based on poly(butylene succinate) (PBS) and poly(butylene succinate/diglycolate) (P(BS80BDG20)) affect human osteoblast differentiation, uniaxially aligned (a-) and randomly (r-) distributed nanofibers were produced. Although human osteoblastic SAOS-2 cells were shown to be viable and adherent onto all ES materials, a-P(BS80BDG20) exhibited the best performance both in terms of cellular phosphorylated focal adhesion kinase expression and in terms of alkaline phosphatase activity, calcified bone matrix deposition and quantitative gene expression of bone specific markers during differentiation. It has been hypothesized that the presence of ether linkages may lead to an increased density of hydrogen bond acceptors along the P(BS80BDG20) backbone, which, by interacting with cell membrane components, can in turn promote a better cell attachment on the copolymer mats with respect to the PBS homopolymer. Furthermore, although displaying the same chemical structure, r-P(BS80BDG20) scaffolds showed a reduced cell attachment and osteogenic differentiation in comparison with a-P(BS80BDG20), evidencing the importance of nanofiber alignment. Thus, the coupled action of polymer chemical structure and nanofiber alignment played a significant role in promoting the biological interaction.

Nanoscale Resolution 3D Printing with Pin-Modified Electrified Inkjets for Tailorable Nano/Macrohybrid Constructs for Tissue Engineering

Cells respond to their microenvironment, which is of a size comparable to that of the cells. The macroscale features of three-dimensional (3D) printing struts typically result in whole cell contact guidance (CCG). In contrast, at the nanoscale, where features are of a size similar to that of receptors of cells, the response of cells is more complex. The cell-nanotopography interaction involves nanoscale adhesion localized structures, which include cell adhesion-related particles that change in response to the clustering of integrin. For this reason, it is necessary to develop a technique for manufacturing tailorable nano/macrohybrid constructs capable of freely controlling the cellular activity. In this study, a hierarchical 3D nano- to microscale hybrid structure was fabricated by combinational processing of 3D printing and electrified inkjet spinning via pin motions. This method overcomes the disadvantages of conventional 3D printing, providing a novel combinatory technique for the fabrication of 3D hybrid constructs with excellent cell proliferation. Through a pin-modified electrified inkjet spinning, we have successfully fabricated customizable nano-/microscale hybrid constructs in a fibrous or mesh form, which can control the cell fate. We have conducted this study of cell-topography interactions from the fabrication approach to accelerate the development of next-generation 3D scaffolds.

Honeycomb-like polysulphone/polyurethane nanofiber filter for the removal of organic/inorganic species from air streams

Nanofiber nonwoven filters, especially those prepared by electrospinning, are of particular interest because of their high filtration efficiency. However, existing electrospun filters suffer from inherent limitations in that both strengths and filtration resistances of the filters leave much to be desired. Herein, we present a novel nonwoven filter that is composed of polysulphone and polyurethane nanofibers. By mimicking the honeycomb structure, a heterogeneous distribution of both fiber diameter and fiber density has been achieved. Compared with nanofiber nonwovens with plain architectures, the honeycomb-like nonwovens possess higher filtration efficiency (∼99.939%), better mechanical strength (∼105.24 N g^-1) and improved quality factor (∼0.04 Pa^-1). The filtration efficiency against both inorganic and organic aerosols is guaranteed through the nanofiber surface geometry and the intrinsic charge-retention capacity of polysulphone. Since the production of this nanofiber filter does not need multistep procedures and can be easily scaled up on a needleless electrospinning device, we anticipate that the strategy of endowing nanofibers with honeycomb texture and charge-retention capacity may lead to the development of advanced fiber filters.

Aligned laminin core-polydioxanone/collagen shell fiber matrices effective for neuritogenesis

Neural tissue regeneration is a significant challenge, because severe nerve injury is quite difficult to regenerate spontaneously. Although, many studies have been devoted to promote nerve regeneration, there are still many technical challenges to achieve satisfactory results. In this study, we designed biomimetic matrices composed of aligned laminin core-polydioxanone/collagen shell (Lam-PDO/Col) fibers, which can provide both topographical and biochemical cues for promoting neuritogenesis. The aligned Lam-PDO/Col core-shell fiber matrices were fabricated by magnetic field-assisted electrospinning with the coaxial system, and their potential as biofunctional scaffolds for promoting neuritogenesis was explored. It was demonstrated that the aligned Lam-PDO/Col core-shell fibers were successfully fabricated, and the laminin in the core of fibers was steadily and continuously released from fibers. In addition, the cellular behaviors of hippocampal neuronal cells on the matrices were significantly enhanced. Moreover, the aligned Lam-PDO/Col fiber matrices effectively improved and guided neurite outgrowth as well as the neurogenic differentiation by providing both topographical and biochemical cues through aligned fiber structure and sustained release of laminin. Collectively, it is suggested that the aligned Lam-PDO/Col core-shell fiber matrices are one of the most promising approaches for promoting neuritogenesis and neural tissue regeneration.

Fabrication and Characterization of Aligned Flexible Lead-Free Piezoelectric Nanofibers for Wearable Device Applications

Flexible lead-free piezoelectric nanofibers, based on BNT-ST (0.78Bi_0.5Na_0.5TiO₃-0.22SrTiO₃) ceramic and poly(vinylidene fluoride-trifluoroethylene) (PVDF-TrFE) copolymers, were fabricated by an electrospinning method and the effects of the degree of alignment in the nanofibers on the piezoelectric characteristics were investigated. The microstructure of the lead-free piezoelectric nanofibers was observed by field emission scanning electron microscope (FE-SEM) and the orientation was analyzed by fast Fourier transform (FFT) images. X-ray diffraction (XRD) analysis confirmed that the phase was not changed by the electrospinning process and maintained a perovskite phase. Polarization-electric field (P-E) loops and piezoresponse force microscopy (PFM) were used to investigate the piezoelectric properties of the piezoelectric nanofibers, according to the degree of alignment—the well aligned piezoelectric nanofibers had higher piezoelectric properties. Furthermore, the output voltage of the aligned lead-free piezoelectric nanofibers was measured according to the vibration frequency and the bending motion and the aligned piezoelectric nanofibers with a collector rotation speed of 1500 rpm performed the best.

Fabrication of transparent hemispherical 3D nanofibrous scaffolds with radially aligned patterns via a novel electrospinning method

Tissue engineering has significantly contributed to the development of optimal treatments for individual injury sites based on their unique functional and histologic properties. Human organs and tissue have three-dimensional (3D) morphologies; for example, the morphology of the eye is a spherical shape. However, most conventional electrospinning equipment is only capable of fabricating a two-dimensional (2D) structured fibrous scaffold and no report is available on a 3D electrospinning method to fabricate a hemispherical scaffold to mimic the native properties of the cornea, including microscopic to macroscopic morphology and transparency. We proposed a novel electrospinning method using a single nonconductive hemispherical device and a metal pin. A designed peg-top shaped collector, a hemispherical nonconductive device with a metal pin in the center and copper wire forming a circle around at the edge was attached to a conventional conductive collector. A 3D hemispherical transparent scaffold with radially aligned nanofibers was successfully fabricated with the designed peg-top collector. In summary, our fabricated 3D electrospun scaffold is expected to be suitable for the treatment of injuries of ocular tissues owing to the hemispherical shape and radially aligned nanofibers which can guide the direction of the main collagen and cellular actin filament in the extracellular matrix.

Ternary Aligned Nanofibers of RGD Peptide-Displaying M13 Bacteriophage/PLGA/Graphene Oxide for Facilitated Myogenesis

Recently, there have been tremendous efforts to develop the biofunctional scaffolds by incorporating various biochemical factors. In the present study, we fabricated poly(lactic-co-glycolic acid) (PLGA) nanofiber sheets decorated with graphene oxide (GO) and RGD peptide. The decoration of GO and RGD peptide was readily achieved by using RGD peptide-displaying M13 bacteriophage (RGD-M13 phage) and electrospinning. Furthermore, the aligned GO-decorated PLGA/RGD peptide (GO-PLGA/RGD) ternary nanofiber sheets were prepared by magnetic field-assisted electrospinning, and their potentials as bifunctional scaffolds for facilitating myogenesis were explored. We characterized the physicochemical and mechanical properties of the sheets by scanning electron microscopy, Raman spectroscopy, contact angle measurement, and tensile test. In addition, the C2C12 skeletal myoblasts were cultured on the aligned GO-PLGA/RGD nanofiber sheets, and their cellular behaviors, including initial attachment, proliferation and myogenic differentiation, were evaluated. Our results revealed that the GO-PLGA/RGD nanofiber sheets had suitable physicochemical and mechanical properties for supporting cell growth, and could significantly promote the spontaneous myogenic differentiation of C2C12 skeletal myoblasts. Moreover, it was revealed that the myogenic differentiation was further accelerated on the aligned GO-PLGA/RGD nanofiber sheets due to the synergistic effects of RGD peptide, GO and aligned nanofiber structure. Therefore, , it is suggested that the aligned GO-PLGA/RGD ternary nanofiber sheets are one of the most promising approaches for facilitating myogenesis and promoting skeletal tissue regeneration.

Effect of scaffold morphology and cell co-culture on tenogenic differentiation of HADMSC on centrifugal melt electrospun poly (L‑lactic acid) fibrous meshes

Engineered tendon grafts offer a promising alternative for grafting during the reconstruction of complex tendon tears. The tissue-engineered tendon substitutes have the advantage of increased biosafety and the option to customize their biochemical and biophysical properties to promote tendon regeneration. In this study, we developed a novel centrifugal melt electrospinning (CME) technique, with the goal of optimizing the fabrication parameters to generate fibrous scaffolds for tendon tissue engineering. The effects of CME processing parameters, including rotational speed, voltage, and temperature, on fiber properties (i.e. orientation, mean diameter, and productivity) were systematically investigated. By using this solvent-free and environmentally friendly method, we fabricated both random and aligned poly (L-lactic acid) (PLLA) fibrous scaffolds with controllable mesh thickness. We also investigated and compared their morphology, surface hydrophilicity, and mechanical properties. We seeded human adipose derived mesenchymal stem cells (HADMSC) on various PLLA fibrous scaffolds and conditioned the constructs in tenogenic differentiation medium for up to 21 days, to investigate the effects of fiber alignment and scaffold thickness on cell behavior. Aligned fibrous scaffolds induced cell elongation and orientation through a contact guidance phenomenon and promoted HADMSC proliferation and differentiation towards tenocytes. At the early stage, thinner scaffolds were beneficial for HADMSC proliferation, but the scaffold thickness had no significant effects on cell proliferation for longer-term cell culture. We further co-seeded HADMSC and human umbilical vein endothelial cells (HUVEC) on aligned PLLA fibrous mats and determined how the vascularization affected HADMSC tenogenesis. We found that co-cultured HADMSC-HUVEC expressed more tendon-related markers on the aligned fibrous scaffold. The co-culture systems promoted in vitro HADMSC differentiation towards tenocytes. These aligned fibrous scaffolds fabricated by CME technique could potentially be utilized to repair and regenerate tendon defects and injuries with cell co-culture and controlled vascularization.

Cancer-associated fibroblasts promote directional cancer cell migration by aligning fibronectin

Cancer-associated fibroblasts (CAFs) are major components of the carcinoma microenvironment that promote tumor progression. However, the mechanisms by which CAFs regulate cancer cell migration are poorly understood. In this study, we show that fibronectin (Fn) assembled by CAFs mediates CAF-cancer cell association and directional migration. Compared with normal fibroblasts, CAFs produce an Fn-rich extracellular matrix with anisotropic fiber orientation, which guides the cancer cells to migrate directionally. CAFs align the Fn matrix by increasing nonmuscle myosin II- and platelet-derived growth factor receptor α-mediated contractility and traction forces, which are transduced to Fn through α5β1 integrin. We further show that prostate cancer cells use αv integrin to migrate efficiently and directionally on CAF-derived matrices. We demonstrate that aligned Fn is a prominent feature of invasion sites in human prostatic and pancreatic carcinoma samples. Collectively, we present a new mechanism by which CAFs organize the Fn matrix and promote directional cancer cell migration.

Neural Network for Nanoscience Scanning Electron Microscope Image Recognition

In this paper we applied transfer learning techniques for image recognition, automatic categorization, and labeling of nanoscience images obtained by scanning electron microscope (SEM). Roughly 20,000 SEM images were manually classified into 10 categories to form a labeled training set, which can be used as a reference set for future applications of deep learning enhanced algorithms in the nanoscience domain. The categories chosen spanned the range of 0-Dimensional (0D) objects such as particles, 1D nanowires and fibres, 2D films and coated surfaces, and 3D patterned surfaces such as pillars. The training set was used to retrain on the SEM dataset and to compare many convolutional neural network models (Inception-v3, Inception-v4, ResNet). We obtained compatible results by performing a feature extraction of the different models on the same dataset. We performed additional analysis of the classifier on a second test set to further investigate the results both on particular cases and from a statistical point of view. Our algorithm was able to successfully classify around 90% of a test dataset consisting of SEM images, while reduced accuracy was found in the case of images at the boundary between two categories or containing elements of multiple categories. In these cases, the image classification did not identify a predominant category with a high score. We used the statistical outcomes from testing to deploy a semi-automatic workflow able to classify and label images generated by the SEM. Finally, a separate training was performed to determine the volume fraction of coherently aligned nanowires in SEM images. The results were compared with what was obtained using the Local Gradient Orientation method. This example demonstrates the versatility and the potential of transfer learning to address specific tasks of interest in nanoscience applications.

Microcontact printing of polydopamine on thermally expandable hydrogels for controlled cell adhesion and delivery of geometrically defined microtissues

Scaffold-free harvest of microtissue with a defined structure has received a great deal of interest in cell-based assay and regenerative medicine. In this study, we developed thermally expandable hydrogels with spatially controlled cell adhesive patterns for rapid harvest of geometrically controlled microtissue. We patterned polydopamine (PD) on to the hydrogel via microcontact printing (μCP), in linear shapes with widths of 50, 100 and 200μm. The hydrogels facilitated formation of spatially controlled strip-like microtissue of human dermal fibroblasts (HDFBs). It was possible to harvest and translocate microtissues with controlled widths of 61.4±14.7, 104.3±15.6, and 186.6±22.3μm from the hydrogel to glass substrates by conformal contact upon expansion of the hydrogel in response to a temperature change from 37 to 4°C, preserving high viability, extracellular matrix, and junction proteins. Microtissues were readily translocated in vivo to the subcutaneous tissue of mouse. The microtissues were further utilized as a simple assay model for monitoring of contraction in response to ROCK1 inhibitor. Collectively, micro-sized patterning of PD on the thermally expandable hydrogels via μCP holds promise for the development of microtissue harvesting systems that can be employed to ex vivo tissue assay and cell-based therapy.

STATEMENT OF SIGNIFICANCE

Harvest of artificial tissue with controlled cellular arrangement independently from external materials has been widely studied in cell-based assay and regenerative medicine. In this study, we developed scaffold-free harvest system of microtissues with anisotropic arrangement and controlled width by exploiting thermally expandable hydrogels with cell-adhesive patterns of polydopamine formed by simple microcontact printing. Cultured strips of human dermal fibroblasts on the hydrogels were rapidly delivered to various targets ranging from flat coverglass to mice subcutaneous tissue by thermal expansion of the hydrogel at 4°C for 10min. These were further utilized as a drug screening model responding to ROCK1 inhibitor, which imply its versatile applicability.

Therapeutic Effects of Doxycycline on the Quality of Repaired and Unrepaired Achilles Tendons

BACKGROUND

Achilles tendon tears are devastating injuries, especially to athletes. Elevated matrix metalloproteinase (MMP) activity after a tendon injury has been associated with deterioration of the collagen network and can be inhibited with doxycycline (Doxy).

HYPOTHESIS

Daily oral administration of Doxy will enhance the histological, molecular, and biomechanical quality of transected Achilles tendons. Additionally, suture repair will further enhance the quality of repaired tendons.

STUDY DESIGN

Controlled laboratory study.

METHODS

Randomized unilateral Achilles tendon transection was performed in 288 adult male Sprague-Dawley rats. The injured tendons were either unrepaired (groups 1 and 2) or surgically repaired (groups 3 and 4). Animals from groups 2 and 4 received Doxy daily through oral gavage, and animals from groups 1 and 3 served as controls (no Doxy). Tendons were harvested at 1.5, 3, 6, and 9 weeks after the injury (n = 18 per group and time point). The quality of tendon repair was evaluated based on the histological grading score, collagen fiber orientation, gene expression, and biomechanical properties.

RESULTS

In surgically repaired samples, Doxy enhanced the quality of tendon repair compared with no Doxy ( P = .0014). Doxy had a significant effect on collagen fiber dispersion, but not principal fiber angle. There was a significant effect of time on the gene expression of MMP-3, MMP-9 and TIMP1, and Doxy significantly decreased MMP-3 expression at 9 weeks. Doxy treatment with surgical repair increased the dynamic modulus at 6 weeks but not at 9 weeks after the injury ( P < .001). Doxy also increased the equilibrium modulus and decreased creep strain irrespective of the repair group. Doxy did not have a significant effect on the histology or biomechanics of unrepaired tendons.

CONCLUSION

The findings indicate that daily oral administration of Doxy accelerated matrix remodeling and the dynamic and equilibrium biomechanics of surgically repaired Achilles tendons, although such enhancements were most evident at the 3- to 6-week time points.

CLINICAL RELEVANCE

The inhibition of MMPs at the optimal stage of the repair process may accelerate Achilles tendon repair and improve biomechanical properties, especially when paired with surgical management.

The passive biomechanics of human pelvic collecting lymphatic vessels

The lymphatic system has a major significance in the metastatic pathways in women's cancers. Lymphatic pumping depends on both extrinsic and intrinsic mechanisms, and the mechanical behavior of lymphatic vessels regulates the function of the system. However, data on the mechanical properties and function of human lymphatics are lacking. Our aim is to characterize, for the first time, the passive biomechanical behavior of human collecting lymphatic vessels removed at pelvic lymph node dissection during primary debulking surgeries for epithelial ovarian cancer. Isolated vessels were cannulated and then pressurized at varying levels of applied axial stretch in a calcium-free Krebs buffer. Pressurized vessels were then imaged using multi-photon microscopy for collagen-elastin structural composition and fiber orientation. Both pressure-diameter and force-elongation responses were highly nonlinear, and axial stretching of the vessel served to decrease diameter at constant pressure. Pressure-diameter behavior for the human vessels is very similar to data from rat mesenteric vessels, though the human vessels were approximately 10× larger than those from rats. Multiphoton microscopy revealed the vessels to be composed of an inner layer of elastin with an outer layer of aligned collagen fibers. This is the first study that successfully described the passive biomechanical response and composition of human lymphatic vessels in patients with ovarian cancer. Future work should expand on this knowledge base with investigations of vessels from other anatomical locations, contractile behavior, and the implications on metastatic cell transport.

Cellular Morphology-Mediated Proliferation and Drug Sensitivity of Breast Cancer Cells

The interpretation of the local microenvironment of the extracellular matrix for malignant tumor cells is in intimate relation with metastatic spread of cancer cells involving the associated issues of cellular proliferation and drug responsiveness. This study was aimed to assess the combination of both surface topographies (fiber alignments) and different stiffness of the polymeric substrates (poly(l-lactic acid) and poly(ε-caprolactone), PLLA and PCL, respectively) as well as collagen substrates (coat and gel) to elucidate the effect of the cellular morphology on cellular proliferation and drug sensitivities of two different types of breast cancer cells (MDA-MB-231 and MCF-7). The morphological spreading parameter (nucleus/cytoplasm area ratio) induced by the anthropogenic substrates has correlated intimately with the cellular proliferation and the drug sensitivity the half maximal inhibitory concentration (IC50) of cancer cells. This study demonstrated the promising results of the parameter for the evaluation of cancer cell malignancy.

Poly(l-lactide) melt spun fiber-aligned scaffolds coated with collagen or chitosan for guiding the directional migration of osteoblasts in vitro

PLLA melt spun fiber-aligned scaffolds coated with collagen or chitosan enhance the viability, spreading, alignment and mobility of osteoblasts.

Comprehensive study on cellular morphologies, proliferation, motility, and epithelial–mesenchymal transition of breast cancer cells incubated on electrospun polymeric fiber substrates

Aligned fibers substrates caused elongation and alignment of the MDA-MB-231 cells along the fiber directionsviareducing the cell roundness and E-cadherin expression.

Characterization of dorsal root ganglion neurons cultured on silicon micro-pillar substrates

Our study focuses on characterization of dorsal root ganglion (DRG) neurons cultured on silicon micro-pillar substrates (MPS) with the ultimate goal of designing micro-electrode arrays (MEAs) for successful electrophysiological recordings of DRG neurons. Adult and neonatal DRG neurons were cultured on MPS and glass coverslips for 7 days in vitro. DRG neuronal distribution and morphometric analysis, including neurite alignment and length, was performed on MPS areas with different pillar width and spacing. We showed that MPS provide an environment for growth of adult and neonatal DRG neurons as permissive as control glass surfaces. Neonatal DRG neurons were present on MPS areas with narrow pillar spacing, while adult neurons preferred wider pillar spacing. Compared to the control glass surfaces the neonatal and adult DRG neurons in regions with narrow pillar spacing range developed a smaller number of longer neurites. In the same area, neurites were preferentially oriented along three directional axes at 30°, 90° and 150°. MPS architecture influenced growth directionality of all main DRG neuronal subtypes. We can conclude that specific micro-pillar substrate topography affects the morphology of DRG neurons. This knowledge can enable development of MEAs with precisely defined physical features for various neuroscience applications.

Comparison of cell behavior on pva/pva-gelatin electrospun nanofibers with random and aligned configuration

Electrospinning technique is able to create nanofibers with specific orientation. Poly(vinyl alcohol) (PVA) have good mechanical stability but poor cell adhesion property due to the low affinity of protein. In this paper, extracellular matrix, gelatin is incorporated into PVA solution to form electrospun PVA-gelatin nanofibers membrane. Both randomly oriented and aligned nanofibers are used to investigate the topography-induced behavior of fibroblasts. Surface morphology of the fibers is studied by optical microscopy and scanning electron microscopy (SEM) coupled with image analysis. Functional group composition in PVA or PVA-gelatin is investigated by Fourier Transform Infrared (FTIR). The morphological changes, surface coverage, viability and proliferation of fibroblasts influenced by PVA and PVA-gelatin nanofibers with randomly orientated or aligned configuration are systematically compared. Fibroblasts growing on PVA-gelatin fibers show significantly larger projected areas as compared with those cultivated on PVA fibers which p-value is smaller than 0.005. Cells on PVA-gelatin aligned fibers stretch out extensively and their intracellular stress fiber pull nucleus to deform. Results suggest that instead of the anisotropic topology within the scaffold trigger the preferential orientation of cells, the adhesion of cell membrane to gelatin have substantial influence on cellular behavior.

Biomechanics of cell reorientation in a three-dimensional matrix under compression

Although a number of studies have reported that cells cultured on a stretchable substrate align away from or perpendicular to the stretch direction, how cells sense and respond to compression in a three-dimensional (3D) matrix remains an open question. We analyzed the reorientation of human prostatic normal tissue fibroblasts (NAFs) and cancer-associated fibroblasts (CAFs) in response to 3D compression using a Fast Fourier Transform (FFT) method. Results show that NAFs align to specific angles upon compression while CAFs exhibit a random distribution. In addition, NAFs with enhanced contractile force induced by transforming growth factor β (TGF-β) behave in a similar way as CAFs. Furthermore, a theoretical model based on the minimum energy principle has been developed to provide insights into these observations. The model prediction is in agreement with the observed cell orientation patterns in several different experimental conditions, disclosing the important role of stress fibers and inherent cell contractility in cell reorientation.

Gelatin/nanoceria nanocomposite fibers as antioxidant scaffolds for neuronal regeneration

BACKGROUND

The design of efficient nerve conduits able to sustain the axonal outgrowth and its guidance towards appropriate targets is of paramount importance in nerve tissue engineering.

METHODS

In this work, we propose the preparation of highly aligned nanocomposite fibers of gelatin/cerium oxide nanoparticles (nanoceria), prepared by electrospinning. Nanoceria are powerful self-regenerative antioxidant nanomaterials, that behave as strong reactive oxygen species scavengers, and among various beneficial effects, they have been proven to inhibit the cell senescence and to promote the neurite sprouting.

RESULTS

After a detailed characterization of the developed substrates, they have been tested on neuron-like SH-SY5Y cells, demonstrating strong antioxidant properties and beneficial multi-cue effects in terms of neurite development and alignment.

CONCLUSIONS

Obtained findings suggest efficiency of the proposed substrates in providing combined topographical stimuli and antioxidant effects to cultured cells.

GENERAL SIGNIFICANCE

Proposed nanocomposite scaffolds represent a promising approach for nerve tissue engineering and regenerative medicine.

Highly stretchable, printable nanowire array optical polarizers

Designing optical components such as polarizers on substrates with high mechanical deformability have potential to realize new device platforms in photonics, wearable electronics, and sensors. Conventional manufacturing approaches that rely highly on top-down lithography, deposition and the etching process can easily confront compatibility issues and high fabrication complexity. Therefore, an alternative integration scheme is necessary. Here, we demonstrate fabrication of highly flexible and stretchable wire grid polarizers (WGPs) by printing bottom-up grown Ge or Ge/Si core/shell nanowires (NWs) on device substrates in a highly dense and aligned fashion. The maximum contrast ratio of 104 between transverse electric (TE) and transverse magnetic (TM) fields and above 99% (maximum 99.7%) of light blocking efficiency across the visible spectrum range are achieved. Further systematic analyses are performed both in experimental and numerical models to reveal the correspondence between physical factors (coverage ratio of NW arrays and diameter) and polarization efficiency. Moreover, we demonstrate distinctive merits of our approach: (i) high flexibility in the choice of substrates such as glass, plastic, or elastomer; (ii) easy combination with additional novel functionalities, for example, air permeability, flexibility/stretchability, biocompatibility, and a skin-like low mechanical modulus; (iii) selective printing of polarizers on a designated local area.

Effect of polyvinylidene fluoride electrospun fiber orientation on neural stem cell differentiation

Electrospun polymer piezoelectric fibers can be used in neural tissue engineering (NTE) to mimic the physical, biological, and material properties of the native extracellular matrix. In this work, we have developed scaffolds based on polymer fiber architectures for application in NTE. To study the role of such three-dimensional scaffolds, a rotating drum collector was used for electrospinning poly(vinylidene) fluoride (PVDF) polymer at various rotation speeds. The morphology, orientation, polymorphism, as well as the mechanical behavior of the nonaligned and aligned fiber-based architectures were characterized. We have demonstrated that the jet flow and the electrostatic forces generated by electrospinning of PVDF induced local conformation changes which promote the generation of the β-phase. Fiber anisotropy could be a critical feature for the design of suitable scaffolds for NTEs. We thus assessed the impact of PVDF fiber alignment on the behavior of monkey neural stem cells (NSCs). NSCs were seeded on nonaligned and aligned scaffolds and their morphology, adhesion, and differentiation capacities into the neuronal and glial pathways were studied using microscopic techniques. Significant changes in the growth and differentiation capacities of NSCs into neuronal and glial cells as a function of the fiber alignment were evidenced. These results demonstrate that PVDF scaffolds may serve as instructive scaffolds for NSC survival and differentiation, and may be valuable tools for the development of cell- and scaffold-based strategies for neural repair. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 2376-2393, 2017.

Role of integrin α7β1 signaling in myoblast differentiation on aligned polydioxanone scaffolds

The aligned structural environment in skeletal muscle is believed to be a crucial component in functional muscle regeneration. Myotube formation is increased on aligned biomaterials, but we do not fully understand the mechanisms that direct this enhanced fusion. Previous studies indicate that the α7 integrin subunit is upregulated during myoblast differentiation, suggesting that signaling via α7β1 mediates the effect of alignment. To test this hypothesis, we took advantage of an in vitro model using random and aligned polydioxanone (PDO) matrices and C2C12 myoblasts. We measured expression and production of myoblast markers: paired box-7 (Pax7), myogenic differentiation factor-1 (MyoD), myogenin (MyoG), myogenic factor-6 (Myf6), and myosin heavy chain (MyHC). To examine the role of α7β1 signaling, we measured expression and production of α7, α5, and β1 and myoblast markers in wild type cells and in cells silenced for α7 and assessed effects of silencing on myogenic differentiation. Downstream signaling via ERK1/2 mitogen activated protein kinase (MAPK) was examined using a specific MEK1/2 inhibitor. Alignment increased mRNAs and protein for early (MyoD) and late (MyoG, MyHC) myoblast markers in comparison to non-aligned matrices, and these levels corresponded with increased α7 protein. α7-silencing reduced MyoG and MyHC protein in cells cultured on tissue culture polystyrene and aligned PDO matrices compared to wild type cells. Inhibition of ERK1/2 blocked effects of alignment. These data suggest that alignment regulates myogenic differentiation via α7β1 integrin signaling and ERK1/2 mediated gene expression.

STATEMENT OF SIGNIFICANCE

Muscle regeneration in severe muscle injuries is complex, requiring a sequence of events to promote healing and not fibrosis. Aligned biomaterials that recapitulate muscle environments hold potential to facilitate regeneration, but it is important to understand cell-substrate signaling to form functional muscle. A critical component of muscle signaling is integrin α7β1, where mice lacking α7 exhibit a dystrophic phenotype and impaired regeneration. Here, we report the role of α7β1 signaling in myoblast differentiation on aligned biomaterials. α7-silenced myoblasts were found to regulate myogenic differentiation and demonstrate defective fusion. Our data shows reduced levels of myogenin and myosin heavy chain protein, while MyoD remains unchanged. These results support the hypothesis that α7β1 signaling plays a role in substrate-dependent tissue engineering strategies.

Current Status of Tissue-Engineered Scaffolds for Rotator Cuff Repair

Rotator cuff tears continue to be at significant risk for re-tear or for failure to heal after surgical repair despite the use of a variety of surgical techniques and augmentation devices. Therefore, there is a need for functionalized scaffold strategies to provide sustained mechanical augmentation during the critical first 12-weeks following repair, and to enhance the healing potential of the repaired tendon and tendon-bone interface. Tissue engineered approaches that combine the use of scaffolds, cells, and bioactive molecules towards promising new solutions for rotator cuff repair are reviewed. The ideal scaffold should have adequate initial mechanical properties, be slowly degrading or non-degradable, have non-toxic degradation products, enhance cell growth, infiltration and differentiation, promote regeneration of the tendon-bone interface, be biocompatible and have excellent suture retention and handling properties. Scaffolds that closely match the inhomogeneity and non-linearity of the native rotator cuff may significantly advance the field. While substantial pre-clinical work remains to be done, continued progress in overcoming current tissue engineering challenges should allow for successful clinical translation.

Enhancing the Biomechanical Performance of Anisotropic Nanofibrous Scaffolds in Tendon Tissue Engineering: Reinforcement with Cellulose Nanocrystals

Anisotropically aligned electrospun nanofibrous scaffolds based on natural/synthetic polymer blends have been established as a reasonable compromise between biological and biomechanical performance for tendon tissue engineering (TE) strategies. However, the limited tensile properties of these biomaterials restrict their application in this field due to the load-bearing nature of tendon/ligament tissues. Herein, the use of cellulose nanocrystals (CNCs) as reinforcing nanofillers in aligned electrospun scaffolds based on a natural/synthetic polymer blend matrix, poly-ε-caprolactone/chitosan (PCL/CHT) is reported. The incorporation of small amounts of CNCs (up to 3 wt%) into tendon mimetic nanofiber bundles has a remarkable biomaterial-toughing effect (85% ± 5%, p < 0.0002) and raises the scaffolds mechanical properties to tendon/ligament relevant range (σ = 39.3 ± 1.9 MPa and E = 540.5 ± 83.7 MPa, p < 0.0001). Aligned PCL/CHT/CNC nanocomposite fibrous scaffolds meet not only the mechanical requirements for tendon TE applications but also provide tendon mimetic extracellular matrix (ECM) topographic cues, a key feature for maintaining tendon cell's morphology and behavior. The strategy proposed here may be extended to other anisotropic aligned nanofibrous scaffolds based on natural/synthetic polymer blends and enable the full exploitation of the advantages provided by their tendon mimetic fibrous structures in tendon TE.

A Controlled Design of Aligned and Random Nanofibers for 3D Bi-functionalized Nerve Conduits Fabricated via a Novel Electrospinning Set-up

Scaffolds made of aligned nanofibers are favorable for nerve regeneration due to their superior nerve cell attachment and proliferation. However, it is challenging not only to produce a neat mat or a conduit form with aligned nanofibers but also to use these for surgical applications as a nerve guide conduit due to their insufficient mechanical strength. Furthermore, no studies have been reported on the fabrication of aligned nanofibers and randomly-oriented nanofibers on the same mat. In this study, we have successfully produced a mat with both aligned and randomly-oriented nanofibers by using a novel electrospinning set up. A new conduit with a highly-aligned electrospun mat is produced with this modified electrospinning method, and this proposed conduit with favorable features, such as selective permeability, hydrophilicity and nerve growth directional steering, were fabricated as nerve guide conduits (NGCs). The inner surface of the nerve conduit is covered with highly aligned electrospun nanofibers and is able to enhance the proliferation of neural cells. The central part of the tube is double-coated with randomly-oriented nanofibers over the aligned nanofibers, strengthening the weak mechanical strength of the aligned nanofibers.

Image-based quantification of fiber alignment within electrospun tissue engineering scaffolds is related to mechanical anisotropy

It is well documented that electrospun tissue engineering scaffolds can be fabricated with variable degrees of fiber alignment to produce scaffolds with anisotropic mechanical properties. Several attempts have been made to quantify the degree of fiber alignment within an electrospun scaffold using image-based methods. However, these methods are limited by the inability to produce a quantitative measure of alignment that can be used to make comparisons across publications. Therefore, we have developed a new approach to quantifying the alignment present within a scaffold from scanning electron microscopic (SEM) images. The alignment is determined by using the Sobel approximation of the image gradient to determine the distribution of gradient angles with an image. This data was fit to a Von Mises distribution to find the dispersion parameter κ, which was used as a quantitative measure of fiber alignment. We fabricated four groups of electrospun polycaprolactone (PCL) + Gelatin scaffolds with alignments ranging from κ = 1.9 (aligned) to κ = 0.25 (random) and tested our alignment quantification method on these scaffolds. It was found that our alignment quantification method could distinguish between scaffolds of different alignments more accurately than two other published methods. Additionally, the alignment parameter κ was found to be a good predictor the mechanical anisotropy of our electrospun scaffolds. The ability to quantify fiber alignment within and make direct comparisons of scaffold fiber alignment across publications can reduce ambiguity between published results where cells are cultured on "highly aligned" fibrous scaffolds. This could have important implications for characterizing mechanics and cellular behavior on aligned tissue engineering scaffolds. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 104A: 1680-1686, 2016.

A validated software application to measure fiber organization in soft tissue

The mechanical behavior of soft connective tissue is governed by a dense network of fibrillar proteins in the extracellular matrix. Characterization of this fibrous network requires the accurate extraction of descriptive structural parameters from imaging data, including fiber dispersion and mean fiber orientation. Common methods to quantify fiber parameters include fast Fourier transforms (FFT) and structure tensors; however, information is limited on the accuracy of these methods. In this study, we compared these two methods using test images of fiber networks with varying topology. The FFT method with a band-pass filter was the most accurate, with an error of [Formula: see text] in measuring mean fiber orientation and an error of [Formula: see text] in measuring fiber dispersion in the test images. The accuracy of the structure tensor method was approximately five times worse than the FFT band-pass method when measuring fiber dispersion. A free software application, FiberFit, was then developed that utilizes an FFT band-pass filter to fit fiber orientations to a semicircular von Mises distribution. FiberFit was used to measure collagen fibril organization in confocal images of bovine ligament at magnifications of [Formula: see text] and [Formula: see text]. Grayscale conversion prior to FFT analysis gave the most accurate results, with errors of [Formula: see text] for mean fiber orientation and [Formula: see text] for fiber dispersion when measuring confocal images at [Formula: see text]. By developing and validating a software application that facilitates the automated analysis of fiber organization, this study can help advance a mechanistic understanding of collagen networks and help clarify the mechanobiology of soft tissue remodeling and repair.

A simple method for fabrication of electrospun fibers with controlled degree of alignment having potential for nerve regeneration applications

In peripheral nerve injuries where direct suturing of nerve endings is not feasible, nerve regeneration has been facilitated through the use of artificially aligned fibrous scaffolds that provide directional growth of neurons to bridge the gap. The degree of fiber alignment is crucial and can impact the directionality of cells in a fibrous scaffold. While there have been multiple approaches that have been used for controlling fiber alignment, however, they have been associated with a compromised control on other properties, such as diameter, morphology, curvature, and topology of fibers. Therefore, the present study demonstrates a modified electrospinning set-up, that enabled fabrication of electrospun fibers with controlled degree of alignment from non-aligned (NA), moderately aligned (MA, 75%) to highly aligned (HA, 95%) sub-micron fibers while keeping other physical properties unchanged. The results demonstrate that the aligned fibers (MA and HA) facilitated directional growth of human astrocytoma cells (U373), wherein the aspect ratio of cells was found to increase with an increase in degree of fibers alignment. In contrast to NA and MA fibers, the HA fibers showed improved contact guidance to U373 cells that was demonstrated by a significantly higher cell aspect ratio and nuclear aspect ratio. In conclusion, the present study demonstrated a modified electrospinning setup to fabricate differentially aligned fibrous scaffolds with the HA fibers showing potential for use in neural tissue engineering.