Recent progress in immunosensors for pesticides

Immunoassay technology: Research progress in microcystin-LR detection in water samples

Increasing global warming and eutrophication have led to frequent outbreaks of cyanobacteria blooms in freshwater. Cyanobacteria blooms cause the death of aquatic and terrestrial organisms and have attracted considerable attention since the 19th century. Microcystin-LR (MC-LR) is one of the most typical cyanobacterial toxins. Therefore, the fast, sensitive, and accurate determination of MC-LR plays an important role in the health of humans and animals. Immunoassay refers to a method that uses the principle of immunology to determine the content of the tested substance in a sample using the tested substance as an antigen or antibody. In analytical applications, the immunoassay technology could use the specific recognition of antibodies for MC-LR detection. In this review, we firstly highlight the immunoassay detection of MC-LR over the past two decades, including classical enzyme-link immunosorbent assay (ELISA), modern immunoassay with optical signal, and modern immunoassay with electrical signal. Among these detection methods, the water environment was used as the main detection system. The advantages and disadvantages of the different detection methods were compared and analyzed, and the principles and applications of immunoassays in water samples were elaborated. Furthermore, the current challenges and developmental trends in immunoassay were systematically introduced to enhance MC-LR detection performance, and some critical points were given to deal with current challenges. This review provides novel insight into MC-LR detection based on immunoassay method.

Electrochemical nanobiosensors equipped with peptides: a review

Recent research in the field of electrochemical biosensors equipped with peptides and nanomaterials have been categorized, reviewed, and critically analyzed. Indeed, using these innovative biosensors can revolutionize biomedical diagnostics in the future. Saving lives, time, and money in this field will be considered as some main benefits of this type of diagnosis. Here, these biosensors have been categorized and evaluated in four main sections. In the first section, the focus is on investigating the types of electrochemical peptide-based nanobiosensors applied to detect pathogenic microorganisms, microbial toxins, and viruses. In the second section, due to the importance of rapid diagnosis and prognosis of various cancers, the electrochemical peptide-based nanobiosensors designed to detect cancer biomarkers have been reviewed and analyzed. In the third section, the electrochemical peptide-based nanobiosensors, which were applied to detect the essential and effective biomolecules in the various diseases, and health control, including enzymes, hormones, biomarkers, and other biomolecules, have been considered. Finally, using a comprehensive analysis, all the used elements in these biosensors have been presented as conceptual diagrams that can effectively guide researchers in future developments. The essential factors in evaluating and analyzing these electrochemical peptide-based nanobiosensors such as analyte, peptide sequence, functional groups interacted between the peptide sequences and other biosensing components, the applied nanomaterials, diagnostic techniques, detection range, and limit of detection have also been included. Other analyzable items such as the type of used redox marker and the location of the peptide sequence against the signal transducer were also considered.

A 3D printable adapter for solid-state fluorescence measurements: the case of an immobilized enzymatic bioreceptor for organophosphate pesticides detection

The widespread use of pesticides in the last decades and their accumulation into the environment gave rise to major environmental and human health concerns. To address this topic, the scientific community pointed out the need to develop methodologies to detect and measure the presence of pesticides in different matrices. Biosensors have been recently explored as fast, easy, and sensitive methods for direct organophosphate pesticides monitoring. Thus, the present work aimed at designing and testing a 3D printed adapter useful on different equipment, and a membrane support to immobilize the esterase-2 from Alicyclobacillus acidocaldarius (EST2) bioreceptor. The latter is labelled with the IAEDANS, a bright fluorescent probe. EST2 was selected since it shows a high specificity toward paraoxon. Our results showed good stability and replicability, with an increasing linear fluorescent intensity recorded from 15 to 150 pmol of labelled EST2. Linearity of data was also observed when using the immobilized labelled EST2 to detect increasing amounts of paraoxon, with a limit of detection (LOD) of 0.09 pmol. This LOD value reveals the high sensitivity of our membrane support when mounted on the 3D adapter, comparable to modern methods using robotic workstations. Notably, the use of an independent support significantly simplified the manipulation of the membrane during experimental procedures and enabled it to match the specificities of different systems. In sum, this work emphasizes the advantages of using 3D printed accessories adapted to respond to the newest research needs.

Analytical Evaluation of Carbamate and Organophosphate Pesticides in Human and Environmental Matrices: A Review

Pesticides are synthetic compounds that may become environmental contaminants through their use and application. The high productivity achieved in the agricultural industry can be credited to the use and application of pesticides by way of pest and insect control. As much as pesticides have a positive impact on the agricultural industry, some disadvantages come with their application in the environment because they are intentionally toxic, and this is more towards non-target organisms. They are grouped into chlorophenols, organochlorines, synthetic pyrethroid, carbamates, and organophosphorus based on their structure. The symptoms of exposure to carbamate (CM) and organophosphates (OP) are similar, although poisoning from CM is of a shorter duration. The analytical evaluation of carbamate and organophosphate pesticides in human and environmental matrices are reviewed using suitable extraction and analytical methods.

Recent advances in synthesis and modification of carbon dots for optical sensing of pesticides

Serious threat from pesticide residues to the ecosystem and human health has become a global concern. Developing reliable methods for monitoring pesticides is a world-wide research hotspot. Carbon dots (CDs) with excellent photostability, low toxicity, and good biocompatibility have been regarded as the potential substitutes in fabricating various optical sensors for pesticide detection. Based on the relevant high-quality publications, this paper first summarizes the current state-of-the-art of the synthetic and modification approaches of CDs. Then, a comprehensive overview is given on the recent advances of CDs-based optical sensors for pesticides over the past five years, with a particular focus on photoluminescent, electrochemiluminescent and colorimetric sensors regarding the sensing mechanisms and design principles by integrating with various recognition elements including antibodies, aptamers, enzymes, molecularly imprinted polymers, and some nanoparticles. Novel functions and extended applications of CDs as signal indicators, catalyst, co-reactants, and electrode surface modifiers, in constructing optical sensors are specially highlighted. Beyond an assessment of the performances of the real-world application of these proposed optical sensors, the existing inadequacies and current challenges, as well as future perspectives for pesticide monitoring are discussed in detail. It is hoped to provide powerful insights for the development of novel CDs-based sensing strategies with their wide application in different fields for pesticide supervision.

Recombinant antibodies and their use for food immunoanalysis

Antibodies are widely employed as biorecognition elements for the detection of a plethora of compounds including food and environmental contaminants, biomarkers, or illicit drugs. They are also applied in therapeutics for the treatment of several disorders. Recent recommendations from the EU on animal protection and the replacement of animal-derived antibodies by non-animal-derived ones have raised a great controversy in the scientific community. The application of recombinant antibodies is expected to achieve a high growth rate in the years to come thanks to their versatility and beneficial characteristics in comparison to monoclonal and polyclonal antibodies, such as stability in harsh conditions, small size, relatively low production costs, and batch-to-batch reproducibility. This review describes the characteristics, advantages, and disadvantages of recombinant antibodies including antigen-binding fragments (Fab), single-chain fragment variable (scFv), and single-domain antibodies (VHH) and their application in food analysis with especial emphasis on the analysis of biotoxins, antibiotics, pesticides, and foodborne pathogens. Although the wide application of recombinant antibodies has been hampered by a number of challenges, this review demonstrates their potential for the sensitive, selective, and rapid detection of food contaminants.

Dual-heteroatom-templated lanthanoid-inserted heteropolyoxotungstates simultaneously comprising Dawson and Keggin subunits and their composite film applied for electrochemical immunosensing of auximone

Two unprecedented PIII–SbIII-heteroatom templated lanthanide-inserted heteropolyoxotungstates were obtained and their composite film was applied for the electrochemical immunosensing of auximone.

Integrating smartphone-assisted ratiometric fluorescent sensors with in situ hydrogel extraction for visual detection of organophosphorus pesticides

Rapid, reliable and on-site detection of organophosphorus pesticides (OPs) on fruit or vegetable surfaces is necessary in real life.

An Electrochemical Immunosensor Based on SPA and rGO-PEI-Ag-Nf for the Detection of Arsanilic Acid

A sensitive electrochemical immunosensor was prepared for rapid detection of ASA based on arsanilic acid (ASA) monoclonal antibody with high affinity. In the preparation of nanomaterials, polyethyleneimine (PEI) improved the stability of the solution and acted as a reducing agent to generate reduced graphene oxide (rGO) with relatively strong conductivity, thereby promoting the transfer of electrons. The dual conductivity of rGO and silver nanoparticles (AgNPs) improved the sensitivity of the sensor. The synthesis of nanomaterials were confirmed by UV-Vis spectroscopy, X-ray diffraction, transmission electron microscopy and scanning electron microscopy. In the optimal experiment conditions, the sensor could achieve the detection range of 0.50–500 ng mL⁻¹ and the limit of detection (LOD) of 0.38 ng mL⁻¹ (S/N = 3). Moreover, the sensor exhibited excellent specificity and acceptable stability, suggesting that the proposed sensor possessed a good potential in ASA detection. Thus, the as-prepared biosensor may be a potential way for detecting other antibiotics in meat and animal-derived foods.

A Simple and Novel Sensor for the Determination of Acetamiprid Based on Its Reducing Effect on the Chemiluminescence of S, N-CQDs in CH3CN-H2O2 System

A simple and novel method for the determination of acetamiprid in water samples is suggested. The method is based on the reducing effect of acetamiprid on the chemiluminescence intensity of new sulfur and nitrogen co-doped carbon dots (S, N-CQDs) in an acetonitrile-hydrogen peroxide (CH₃CN-H₂O₂) system. The possible mechanism was investigated, and it was found that S, N-CQDs react with (¹O₂)₂*, produced from the CH₃CN-H₂O₂ reaction, leading to excited state S, N-CQDs, which deactivate to the ground state by photon emission. Acetamiprid diminishes the chemiluminescence (CL) intensity by competing with S, N-CQDs. The CL intensity reduction is proportional to the concentration of acetamiprid. S, N-CQDs were easily prepared by a hydrothermal method. Under the optimal conditions, a linear range of 2.5 - 25.0 μg L^-1 with a detection limit (3σ) of 0.4 μg L^-1 was obtained. This method was successfully applied to the determination of trace amounts of residual pesticides in water samples.

Critical review on hazardous pollutants in water environment: Occurrence, monitoring, fate, removal technologies and risk assessment

Water is required for the existence of all living things. Water pollution has grown significantly, over the decades and now it has developed as a serious worldwide problem. The presence and persistence of Hazardous pollutants such as dyes, pharmaceuticals and personal care products, heavy metals, fertilizer and pesticides and their transformed products are the matter of serious environmental and health concerns. A variety of approaches have been tried to clean up water and maintain water quality. The type of pollutants present in the water determines the bulk of technological solutions. The main objective of this article was to review the occurrences and fate of hazardous contaminants (dyes, pharmaceuticals and personal care products, heavy metals, and pesticides) found in wastewater effluents. These effluents mingle with other streams of water and that are utilized for a variety of reasons such as irrigation and other domestic activities that is further complicating the issue. It also discussed traditional treatment approaches as well as current advances in hazardous pollutants removal employing graphite oxides, carbon nanotubes, metal organic structures, magnetic nano composites, and other innovative forms of useable materials. It also discussed the identification and quantification of harmful pollutants using various approaches, as well as current advancements. Finally, a risk assessment of hazardous pollutants in water is provided in terms of the human health and the environment. This data is anticipated to serve as a foundation for future improvements in hazardous pollutant risk assessment. Furthermore, future studies on hazardous pollutants must not only emphasize on the parent chemicals, as well as on their possible breakdown products in various media.

A Lab-in-a-Syringe Device Integrated with a Smartphone Platform: Colorimetric and Fluorescent Dual-Mode Signals for On-Site Detection of Organophosphorus Pesticides

Herein, a portable lab-in-a-syringe device integrated with a smartphone sensing platform was designed for rapid, visual quantitative determination of organophosphorus pesticides (OPs) via colorimetric and fluorescent signals. The device was chiefly made up of a conjugate pad labeled with cetyltrimethylammonium bromide-coated gold nanoparticles (CTAB-Au NPs) and a sensing pad modified by ratiometric probes (red-emission quantum dots@SiO₂ nanoparticles@green-emission quantum dots, rQDs@SiO₂@gQDs probe), which was assembled through a disposable syringe and reusable plastic filter. In the detection system, thiocholine (Tch), the hydrolysis product of thioacetylcholine (ATch) by acetylcholinesterase (AchE), could trigger the aggregation of CTAB-Au NPs, resulting in a significant color change from red to purple. Then, CTAB-Au NPs flowed vertically upward and bound to the rQDs@SiO₂@gQDs probe on the sensing pad, reducing the fluorescence resonance energy transfer effect between CTAB-Au NPs and gQDs. Meanwhile, rQDs embedded in SiO₂ NPs remained stable as internal reference fluorescence, achieving a color transition from red to green. Thus, based on the inhibition of AChE activity by OPs, a colorimetric and fluorescent dual-mode platform was constructed for on-site detection of OPs. Using glyphosate as a model, with the support of a color recognizer application (APP) on a smartphone, the ratio of red and green channel values could be utilized for accurate OP quantitative analysis ranging from 0 to 10 μM with a detection limit of 2.81 nM (recoveries, 90.8-122.4%; CV, 1.2-3.4%). Overall, the portable lab-in-a-syringe device based on a smartphone sensing platform integrated sample monitoring and result analysis in the field, implying great potential for on-site detection of OPs.

Rapid field trace detection of pesticide residue in food based on surface-enhanced Raman spectroscopy

Surface-enhanced Raman spectroscopy is an alternative detection tool for monitoring food security. However, there is still a lack of a conclusion of SERS detection with respect to pesticides and real sample analysis, and the summary of intelligent algorithms in SERS is also a blank. In this review, a comprehensive report of pesticides detection using SERS technology is given. The SERS detection characteristics of different types of pesticides and the influence of substrate on inspection are discussed and compared by the typical ways of classification. The key points, including the progress in real sample analysis and Raman data processing methods with intelligent algorithm, are highlighted. Lastly, major challenges and future research trends of SERS analysis of pesticide residue are also addressed. SERS has been proven to be a powerful technique for rapid test of residue pesticides in complex food matrices, but there still is a tremendous development space for future research.

Biomimetic Synthesis of Ultrafine Mixed-Valence Metal-Organic Framework Nanowires and Their Application in Electrochemiluminescence Sensing

Metal-organic frameworks (MOFs) prepared via typical procedures tend to exhibit issues like poor water stability and poor conductivity, which hinder their application in electrochemical sensing. Herein, we report a strategy for the preparation of mixed-valence ultrafine one-dimensional Ce-MOF nanowires based on a micelle-assisted biomimetic route and subsequent investigation into their growth mechanism. The prepared mixed-valence Ce-MOF nanowires exhibited a typical size of ∼50 nm and were found to present good water stability and high conductivity. On this basis, we examined the introduction of these nanowires into the luminol hydrogen peroxide luminescence system and proposed a novel dual-route self-circulating electrochemiluminescence (ECL) catalytic amplification mechanism. Finally, in combination with molecular imprinting, a MOF-based ECL sensor was developed for the detection of trace amounts of imidacloprid in plant-derived foods. This sensor exhibited a linearity of 2-120 nM and a detection limit of 0.34 nM. Thus, we proposed not only a novel route to MOF downsizing but also a facile and robust methodology for the design of a MOF-based molecular imprinting ECL sensor.

Development of a label free electrochemical sensor based on a sensitive monoclonal antibody for the detection of tiamulin

Based on a murine monoclonal antibody (mAb) against tiamulin (TML), an electrochemical immunosensor was proposed using silver-graphene oxide (Ag-GO) nanocomposites and gold nanocomposites (AuNPs) to detect tiamulin (TML). Due to the synergetic properties of Ag-GO nanocomposites and AuNPs, the conductivity of the immunosensor was significantly enhanced. On account of the specific mAb and conductive nanocomposites, the proposed electrochemical immunosensor exhibited a low LOD of 0.003 ng mL^-1 for the detection of TML in a wide linear range of 0.01 to 1000 ng mL^-1. In addition, the immunosensor did not involve additional redox species. Furthermore, the efficient and simple electrochemical immunosensor was employed to detect TML in real samples with high accuracy, suggesting a potential detection platform for other veterinary antibiotics in animal derived foods.

A novel electrochemical immunosensor for the sensitive detection of tiamulin based on staphylococcal protein A and silver nanoparticle-graphene oxide nanocomposites

Tiamulin (TML) is a pleuromutilin antibiotic and mainly used to treat pulmonary and gastrointestinal infections. However, excessive use of TML can bring health threats to consumers. In this work, a label-free electrochemical immunosensor was proposed for sensitive detection of TML in pork and pork liver. Silver nanoparticles (AgNPs) were synthesized in situ on graphene oxide (GO), in which GO acted as a carrier for loading more AgNPs and AgNPs exhibited both strong conductivity and good redox property. In addition, staphylococcal protein A (SPA) was applied to oriented immobilization of fragment crystallizable (Fc) region of the TML monoclonal antibody. Under the optimal condition, the developed electrochemical immunosensor exhibited a good linear response with a concentration of TML ranging from 0.05 ng mL^-1 to 100 ng mL^-1 and the limit of detection (LOD) was 0.04 ng mL^-1. Furthermore, the designed immunosensor was applied to detect TML in real samples with a good accuracy. Therefore, the label-free electrochemical immunosensor could be used as a potential method to detect TML and other antibiotic residues in animal derived foods.

Aptamer Recognition-Driven Homogeneous Electrochemical Strategy for Simultaneous Analysis of Multiple Pesticides without Interference of Color and Fluorescence

Credible and simultaneous determination of multiple pesticides is highly desirable for guaranteeing food safety. However, the current methods are limited to significant interference of color and fluorescence or electrode's modification and mainly focus on the analysis of a single pesticide. Herein, we proposed a novel aptamer-based homogeneous electrochemical system for highly sensitive and simultaneous analysis of multiple pesticides based on target pesticide-switched exonuclease III (Exo III)-assisted signal amplification. The recognition of hairpin probes by target pesticides impels the production of pesticide-DNA complexes, which hybridize with electroactive dye-labeled DNA to form double-stranded DNA, subsequently initiating an Exo III-assisted digestion reaction to generate abundant electroactive dye-tagged mononucleotides. In comparison with pesticide deficiency, two higher differential pulse voltammetry (DPV) currents are measured, which rely on the amount of target pesticides. Therefore, simultaneous analysis of two pesticides is realized with limits of detection of 0.0048 and 0.0089 nM, respectively, comparable or superior to those of known methods that focused on a single pesticide. Moreover, the proposed system is successfully employed to simultaneously evaluate the residual level of acetamiprid and profenofos in Brassica chinensis and thus will find more useful applications for pesticide-related food safety.

Biosensing based on upconversion nanoparticles for food quality and safety applications

Food safety and quality regulations inevitably call for sensitive and accurate analytical methods to detect harmful contaminants in food and to ensure safe food for the consumer. Both novel and well-established biorecognition elements, together with different transduction schemes, enable the simple and rapid analysis of various food contaminants. Upconversion nanoparticles (UCNPs) are inorganic nanocrystals that convert near-infrared light into shorter wavelength emission. This unique photophysical feature, along with narrow emission bandwidths and large anti-Stokes shift, render UCNPs excellent optical labels for biosensing because they can be detected without optical background interferences from the sample matrix. In this review, we show how this exciting technique has evolved into biosensing platforms for food quality and safety monitoring and highlight recent applications in the field.

Development of a quantum dot nanobead-based fluorescent strip immunosensor for on-site detection of aflatoxin B1 in lotus seeds

Owing to the serious threat of aflatoxin B₁ (AFB₁) to public health, development of a reliable method for accurate determination of it is extremely necessary and urgent. In this study, a simple, rapid and highly-sensitive quantum dot nanobeads (QBs) based lateral flow fluorescent strip immunosensor was developed for on-site detection of AFB₁ in edible and medicinal lotus seeds. Carboxylated QBs were used as the fluorescent markers to prepare the fluorescent probe through coupling QBs with anti-AFB1 antibodies. Bovine serum albumin (BSA)-AFB₁ antigens and goat anti-mouse IgG antibodies were coated on the nitrocellulose (NC) membrane to prepare the test (T) and control (C) lines, respectively. Qualitative analysis of AFB₁ was realized by naked eye, and the quantitative determination was achieved with a portable strip reader. Results showed that the newly-developed test strip sensor could achieve rapid detection of AFB₁ within 15 min, allowing a limit of detection (LOD) of 1 ng/mL (2 μg/kg) and a linear range of 1-19 ng/mL (2-38 μg/kg). Recovery rates from the fortified lotus seeds with low, medium and high spiking concentrations (2.5, 5 and 10 μg/kg) ranged from 94.0% to 116.0% with relative standard deviations less than 10%. All the results were confirmed by a standard LC-MS/MS method. The QBs-based fluorescent strip immunosensor with high sensitivity, easy operation, and low cost provided a preferred solution for rapid, on-site screening and highly-sensitive quantitation of AFB₁ in a large number of lotus seed samples.

Simultaneous and ultrasensitive detection of three pesticides using a surface-enhanced Raman scattering-based lateral flow assay test strip

Chlorothalonil (CHL), imidacloprid (IMI) and oxyfluorfen (OXY) are commonly used in combination to increase crop yield. However, these three pesticides are toxic to aquatic organisms and do not easily degrade. In this study, a surface-enhanced Raman scattering-based lateral flow assay (SERS-LFA) test strip was prepared by combining antibodies with SERS nanotags, and then competitive immune binding was used to detect the three pesticides simultaneously. Moreover, the two-way binding effect of ssDNA-streptavidin bound to Ag^4-NTP@AuNPs and Ag^4-NTP@AuNPs with antibodies was used to further amplify the detection signal. Under the optimal conditions, the SERS-LFA test strips exhibited high sensitivity, a low detection limit, short detection time, high specificity and low cost. Furthermore, the detection range was within the values prescribed by international detection standards. By measuring the intensity of the SERS signal on the test line of the paper strip, accurate quantitative analysis was achieved. The practical application of the proposed system was demonstrated by simultaneous detection of CHL, IMI and OXY in environmental and food samples with satisfactory results.

Mechanistic Study on Chemiluminescence of Chloranilic Acid by Co(II)-Mediated Fenton-like System

Reacting with H₂O₂, tetrachloro-1,4-benzoquinone (TCBQ) produces chemiluminescence (CL), but chloranilic acid (CA), the dihydroxylation product of TCBQ, does not. However, an unprecedented strong CL generates from CA/H₂O₂ in the presence of Co(II). Why? We performed quantum chemical calculations on the entire reaction process of CA/H₂O₂ and CA/H₂O₂/Co(II) systems. The computational results indicate: for CA/H₂O₂ system, the reason leading to non-CL as: there is no free ^•OH produced by CA/H₂O₂, which prevents the subsequent reaction from taking place; for CA/H₂O₂/Co(II) system, the chemical process resulting in the CL as: First, a neutral dioxetane is formed via six sequential reactions. Then, the neutral dioxetane decomposes to generate a neutral excited-state (S₁) product via a gradually reversible charge transfer initiated luminescence mechanism. A conical intersection of the ground and the S₁-state potential energy surfaces facilitates the production of the S₁-state product. Ultimately, the neutral S₁-state product emits light as a practical light emitter. The key component for forming dioxetane and the following CL is the intrinsically generated ^•OH, which is roaming around at the region of C₂ atoms of the CA moiety, instead of being free. The quantum chemical calculations supported the experimental observation and conclusion by providing the mechanistic explanation in detail.

Functionalized silver nanoparticles as colorimetric probes for sensing tricyclazole

A colorimetric assay for highly selective and sensitive detection of tricyclazole using fluorescein-functionalized silver nanoparticles (F-AgNPs) as sensing probes was investigated. As the addition of tricyclazole to F-AgNPs, a drastic decrease in the absorbance at 394 nm was detected, which was accompanied with a noticeable color change from yellow to gray. The sensing mechanism involved an interaction between tricyclazole and F-AgNPs, which led to aggregation of the latter, inducing a color change from yellow to gray. An excellent linear calibration curve (R² = 0.9994) was achieved between absorbance at 394 nm and the tricyclazole concentration in the range between 0.06 and 1.0 ppm. Moreover, the detection limit was estimated at 0.051 ppm. The developed colorimetric assay also showed good selectivity and was successfully utilized to quantify tricyclazole in rice samples with satisfactory recoveries. The proposed assay has been successfully applied for monitoring tricyclazole in rice samples.

Optical Screening Methods for Pesticide Residue Detection in Food Matrices: Advances and Emerging Analytical Trends

Pesticides have been extensively used in agriculture to protect crops and enhance their yields, indicating the need to monitor for their toxic residues in foodstuff. To achieve that, chromatographic methods coupled to mass spectrometry is the common analytical approach, combining low limits of detection, wide linear ranges, and high accuracy. However, these methods are also quite expensive, time-consuming, and require highly skilled personnel, indicating the need to seek for alternatives providing simple, low-cost, rapid, and on-site results. In this study, we critically review the available screening methods for pesticide residues on the basis of optical detection during the period 2016-2020. Optical biosensors are commonly miniaturized analytical platforms introducing the point-of-care (POC) era in the field. Various optical detection principles have been utilized, namely, colorimetry, fluorescence (FL), surface plasmon resonance (SPR), and surface enhanced Raman spectroscopy (SERS). Nanomaterials can significantly enhance optical detection performance and handheld platforms, for example, handheld SERS devices can revolutionize testing. The hyphenation of optical assays to smartphones is also underlined as it enables unprecedented features such as one-click results using smartphone apps or online result communication. All in all, despite being in an early stage facing several challenges, i.e., long sample preparation protocols or interphone variation results, such POC diagnostics pave a new road into the food safety field in which analysis cost will be reduced and a more intensive testing will be achieved.

A robust composite hydrogel consisting of polypyrrole and β-cyclodextrin-based supramolecular complex for the label-free amperometric immunodetection of motilin with well-defined dual signal response and high sensitivity

The label-free amperometric immunosensor is a simple, convenient and reliable method for the detection of diseases markers. Its performance heavily relies on the properties of the sensing substrate. In this paper, we proposed a robust composite hydrogel that consists of polypyrrole and vinyl ferrocene/mono-aldehyde β-cyclodextrin (β-CD) complex as a sensing and immobilizing substrate. Surprisingly, it was observed that the microstructure of the hybrid hydrogel could be well regulated by the feed ratio of vinylferrocene and so are the electrochemical properties. Depending on the dual electrochemical active compositions, a large loading capacity of antibodies and meanwhile the excellent conductivity, the square wave voltammetry results of the optimized immunosensor for the detection of motilin exhibited a well-defined dual signal response, with a wide linear range both from 10 pg mL-1 to 100 ng mL-1 for motilin, and an ultralow limit of detection of 6.29 pg mL-1 and 2.73 pg mL-1. More importantly, the immunosensor exhibited an especially sensitive response with the slope value as high as 31.342 and 25.751 respectively, which makes great sense in the practical diagnosis.

MXenes-Based Bioanalytical Sensors: Design, Characterization, and Applications

MXenes are recently developed 2D layered nanomaterials that provide unique capabilities for bioanalytical applications. These include high metallic conductivity, large surface area, hydrophilicity, high ion transport properties, low diffusion barrier, biocompatibility, and ease of surface functionalization. MXenes are composed of transition metal carbides, nitrides, or carbonitrides and have a general formula Mn+1Xn, where M is an early transition metal while X is carbon and/or nitrogen. Due to their unique features, MXenes have attracted significant attention in fields such as clean energy production, electronics, fuel cells, supercapacitors, and catalysis. Their composition and layered structure make MXenes attractive for biosensing applications. The high conductivity allows these materials to be used in the design of electrochemical biosensors and the multilayered configuration makes them an efficient immobilization matrix for the retention of activity of the immobilized biomolecules. These properties are applicable to many biosensing systems and applications. This review describes the progress made on the use and application of MXenes in the development of electrochemical and optical biosensors and highlights future needs and opportunities in this field. In particular, opportunities for developing wearable sensors and systems with integrated biomolecule recognition are highlighted.