Vicia faba bioassay for environmental toxicity monitoring: A review

Cytotoxicity and genotoxicity of lanthanides for Vicia faba L. are mediated by their chemical speciation in different exposure media

A comprehensive study of the toxicity of lanthanides (LN) in relation to the media composition will enhance the prediction of their potential adverse effects for living organisms. Here we examined the effect of different media on the V. faba root elongation and on the cytotoxic (mitotic index) and the genotoxic (micronucleated cell number) effects from toxicity tests with Ce, Gd and Lu (100, 800 and 6400 μg L^-1). Three different exposure media were selected: the standard Hoagland media (SH); an alternative SH, without phosphates (SH-P); and distilled water (DW). In the SH no cyto-genotoxic effects were observed and even, for low LN content, potential root elongation stimulation was reported. The absence of toxic effects was explained by a drastic decrease of the total dissolved LN concentration due to the presence of phosphates causing LN precipitation. In SH-P, LN remained largely soluble and inhibition of root elongation was observed mainly for the highest treatments. While in the tests done in DW, toxic effects were obtained for all treatments. Our results showed that in absence of phosphorous, LN appear mainly as free form and complexed in carbonates and sulphates, and can cause toxic effects, whereas toxicity is not expected when phosphorous is available in aquatic media. The highest LN root contents were observed for the tests using distilled water, possibly due to the absence of competition by Ca²⁺ for uptake. The present work demonstrated that media composition has a great impact in assessing the ecotoxicology of lanthanides.

The electrochemical, dielectric, and ferroelectric properties of Gd and Fe doped LaNiO3 with an efficient solar-light driven catalytic activity to oxidize malachite green dye

This work investigates the effects of double ion substitution on the ferroelectric, electrochemical, dielectric and photocatalytic properties of Gd and Fe doped La_1-yGd_yNi_1-xFe_xO₃ nanoparticles (NPs). La_1-yGd_yNi_1-xFe_xO₃ was fabricated by facile micro-emulsion path and its properties were studied by thermogravimetric analysis (TGA), X-ray diffraction (XRD), scanning electron microscopy (SEM), Raman scattering, Fourier Transform of Infrared (FTIR), energy dispersive x-rays (EDX) techniques. It has a distorted rhombohedral shape with crystallite size within the range of 17-23 nm. The doped material has a spherical heterogeneous morphology, and its surface area increased with increased doping. The electrochemical (CV, EIS, and I-V), conductivity and dielectric (dielectric constant and low dielectric & tangent loss) properties of La_1-yGd_yNi_1-xFe_xO₃ were dependent on the contents of the dopants (Gd and Fe). The doped material had improved specific capacitance compared to the undoped LaNiO₃ due to the synergistic effect of Gd and Fe on the doped materials. The conductivity of Gd and Fe doped LaNiO₃ 5.16 × 10⁴ Sm^-1 was enhanced compared to the undoped LaNiO₃ 3.52 × 10^-2 Sm¹. Furthermore, hysteresis loop was used to investigate the coercivity (Hc), saturation magnetization (Ms) and remanence (Mr) of the material. The Ms and Mr values were enhanced with the content of the dopants. The photocatalytic activity (PCA) of the material in degrading malachite green (MG) dye was studied. La_1-yGd_yNi_1-xFe_xO₃ NPs was able to degrade up to 96.4% of the dye under visible light irradiation in 50 min. La_1-yGd_yNi_1-xFe_xO₃ has remarkable dielectric, electrochemical, ferroelectric and photo-catalytic properties and have potential applications in microwave, electrical, electronic, energy storage devices. It is also an active photo-catalyst material for the removal/oxidation of toxic pollutants from the environment.

Risk assessment and ecotoxicological effects of leachates extracted from industrial district soils of Nanjing, China

With the intensification of industrial development and urbanization, soil pollution is increasingly prominent. Therefore, the potential adverse effects caused by industrial activities need to be investigated. In this study, nine soil samples were collected from the industrial district of Nanjing, China, and the heavy metal concentrations were analyzed. Ambient severity of health (ASI) and ambient severity of ecology (ASII) caused by heavy metals in soil extracts were also evaluated via the multi-media environmental goals (MEG). The environmental risk assessment model was used to assess the health risk of soil extracts. The toxicity of soil extracts was diagnosed for wheat and Vicia faba. The results indicate that the contents of heavy metals were significantly different among the nine soil samples and mass concentration of heavy metals were as followed: Pb > Mn > As > Zn > Cd. Except for CK and S9, the total health impact of all sampling sites were greater than 1. Also, the total ecological hazard degrees of the five heavy metals were all greater than 1, which showed that the soil extracts were harmful to human health and ecological environment. According to the risk characterization model, the carcinogen risk of soil extracts was 1 to 10 orders of magnitude higher than that of non-carcinogens. Drinking water intake was the most direct and primary exposure route. In addition, the ecotoxicological results indicated that with the increase of heavy metal concentration, the activity of amylase (AMS) decreased, while the activity of peroxide (POD) increased, indicating that the soil extracts were toxic to V. faba. The micronucleus rates of V. faba root tips in the sampling soils were significantly higher compared with the control group, reflecting the higher genotoxicity. Our study provides theoretical support for the evaluation of potential health and ecological risks in this industrial district.

Coal bottom ash derived zeolite (SSZ-13) for the sorption of synthetic anion Alizarin Red S (ARS) dye

SSZ-13 zeolite was successfully synthesized from coal bottom ash (CBA) upon hydrothermal treatment for selective sorption of Alizarin Red S (ARS) dye. The characterization of CBA, and SSZ-13 were performed using BET, SEM, FTIR, XRF, and XRD techniques. The optimal fusion ratio (CBA: NaOH) was identified as 1:3, resulting zeolite SSZ-13 with a specific surface area of 206.6 m²/g, compared to raw CBA (7.81 m²/g). The kinetics, isotherms, and thermodynamics of the ARS adsorption onto the SSZ-13, and CBA were assessed under various conditions. The results indicated that the adsorption phenomenon is optimal under acidic medium (pH = 2 for CBA, pH = 3 for SSZ-13); at ambient room temperature of 298 K; adsorbent dosage of 0.03 g, contact time of 120 min. Further, the equilibrium data fitted well to Langmuir isotherm (q_e = 210.75 mg/g), following pseudo-second-order kinetics. Moreover, the chemisorption phenomenon is clearly described using Elovich kinetic model. Various thermodynamic parameters signifies the adsorption phenomenon is spontaneous, and endothermic in nature. Finally, regeneration studies revealed the sensitivity of SSZ-13 zeolite towards 0.1 M NaOH/EtOH eluent in recovery and the possibility of reuse to five successive adsorption/desorption cycles. Thus, hydrothermal treatment of CBA has potential in producing zeolites suitable to adsorption.

High efficiency photocatalytic degradation of Ambroxol over Mn doped TiO2: Experimental designs, identification of transformation products, mineralization and mechanism

Ambroxol (AMB) is a drug commonly used for chronic bronchitis prevention. Once released in surface water, this recalcitrant chemical becomes a hazardous pollutant. Here, we investigated the ability of 1% Mn-doped TiO₂ (Mn-TiO₂) to mineralize AMB by photocatalysis. We studied the morphology, and the physical and electrochemical properties of Mn-TiO₂ using X-ray diffraction, Scanning electron microscopy, Transmission electron microscopy, X-ray fluorescence, BET method, UV-visible, and electrochemical study and optimized the AMB degrading experimental conditions through response surface methodology (RSM). Mn-TiO₂ at the dose of 0.625 g·L^-1 allowed the complete photodegradation of AMB (30 ppm) at pH 7 under UVA light irradiation for 30 min while total mineralization in CO₂ (>96%) was achieved after 24 h of irradiation. Mn-TiO₂ was 1.6-time more efficient than TiO₂ Degussa P25. Product studies were also carried out by liquid chromatography coupled to electrospray high resolution mass spectrometry. Twenty-one photodegradation products were detected and identified. In addition, ionic chromatography analyses revealed the release of Br^-, NH₄⁺, and NO₃^- at respectively 97, 63 and 35% of the total Br, and N initially present in AMB. Finally, the reusability of the photocatalyst was also tested. After four cycles, the almost complete photodegradation of AMB was achieved showing that Mn-TiO₂ was highly stable. This work brings new physical characteristics on Mn-TiO₂ photocatalyst. Moreover, it is the first study investigating the photocatalytic degradation of recalcitrant AMB drug.

The Use of Sugarcane Bagasse to Remove the Organic Dyes from Wastewater

In the present study, the potential of sugarcane bagasse (SCB) was evaluated by methylene blue (MB) retention. The selected low-cost adsorbent was characterized by scanning electron microscopy (SEM) coupled with energy-dispersive X-ray spectroscopy (EDX), Fourier transform infrared spectroscopy (FTIR), BET method, and determination of the point of zero charge (pHzpc). Batch kinetic and isothermal studies were performed to examine the effects of contact time, initial dye concentration, adsorbent dose, pH, and temperature. The results show that the kinetic study of MB adsorption on sugarcane bagasse is very fast; the equilibrium is reached after only 20 minutes. The kinetic model of pseudo-second-order and the Langmuir isotherm model perfectly explain the adsorption process of MB with a monolayer adsorption capacity equal to 49.261 mg·g^-1 activation parameters' values such as free energy (ΔG°), enthalpy (ΔH°), and entropy (ΔS°) also determined as -4.35 kJ·mol^-1, -31.062 kJ·mol^-1, and -0.084 J·mol^-1·K^-1, respectively. Besides, the thermodynamic parameters of the methylene blue sugarcane bagasse system indicate that the exothermic adsorption process is spontaneous.

Uranium (U) source, speciation, uptake, toxicity and bioremediation strategies in soil-plant system: A review

Uranium(U), a highly toxic radionuclide, is becoming a great threat to soil health development, as returning nuclear waste containing U into the soil systems is increased. Numerous studies have focused on: i) tracing the source in U contaminated soils; ii) exploring U geochemistry; and iii) assessing U phyto-uptake and its toxicity to plants. Yet, there are few literature reviews that systematically summarized the U in soil-plant system in past decade. Thus, we present its source, geochemical behavior, uptake, toxicity, detoxification, and bioremediation strategies based on available data, especially published from 2018 to 2021. In this review, we examine processes that can lead to the soil U contamination, indicating that mining activities are currently the main sources. We discuss the relationship between U bioavailability in the soil-plant system and soil conditions including redox potential, soil pH, organic matter, and microorganisms. We then review the soil-plant transfer of U, finding that U mainly accumulates in roots with a quite limited translocation. However, plants such as willow, water lily, and sesban are reported to translocate high U levels from roots to aerial parts. Indeed, U does not possess any identified biological role, but provokes numerous deleterious effects such as reducing seed germination, inhibiting plant growth, depressing photosynthesis, interfering with nutrient uptake, as well as oxidative damage and genotoxicity. Yet, plants tolerate U toxicity via various defense strategies including antioxidant enzymes, compartmentalization, and phytochelatin. Moreover, we review two biological remediation strategies for U-contaminated soil: (i) phytoremediation and (ii) microbial remediation. They are quite low-cost and eco-friendly compared with traditional physical or chemical remediation technologies. Finally, we conclude some promising research challenges regarding U biogeochemical behavior in soil-plant systems. This review, thus, further indicates that the combined application of U low accumulators and microbial inoculants may be an effective strategy for the bioremediation of U-contaminated soils.

Integrated textile effluent treatment method

Textile wastewater purification is a challenging process. Conventional wastewater treatment methods either lack in efficiency, cost-effectiveness or leads to the generation of secondary pollutants. Additionally, some treatment methods are time-consuming. The research presented in the manuscript is a blend of filtration, biosorption, aeration, solar energy-assisted electrolytic precipitation, pH balance, and germicidal treatments with an aim of reducing the suspended solids, intense color, odor, pH, chemical oxygen demand (COD), total dissolved solids (TDS), electrical conductivity (EC), and heavy metal content of textile effluent. Use of environmentally sustainable surface activated biosorbents derived from waste weeds Water Hyacinth (WH) and Parthenium Hysterophorus (PH) as an alternative to commercial grade Activated Charcoal (AC), comparison of adsorption capacities of proposed adsorbents against AC for effluent decolorization, the application of solar energy to run an electrolytic precipitator, and the unique sequential design of various unit processes like coarse and fine filtration, biosorption, aeration, electrolytic precipitation, pH treatment and germicidal UV-C treatment to treat the effluent are some of the novel methodologies explored in the present study. The invented process provides almost completely decolorized (about 90%-94%), particle-free and odorless treated water, with the acceptable levels of heavy metals (Lead-not detected, Arsenic-not detected, Zinc-0.5-0.8 mg/L), TDS (1,500-1,850 mg/L), COD (149-169 mg/L) pH (7.1-7.15), and EC (2.5-2.8 mMhos/cm) as some of the important parameters, fitting well within the standard pollution limits. Performance efficiency estimation and statistical modeling were done for the data using the t test and f test. The values obtained were (t = 2.78 and f = 4.99 for treated WH against AC) and (t = 3.00 and f = 5.38 for treated PH against AC at 0.05 level of significance) as an essential part of the manuscript, proving the supremacy of the proposed process to achieve the standard pollution norms. Cost-effectiveness was an integral factor addressed in the proposed design, recorded a 1.7 USD per 1,000 L of input effluent, which was well below than most of the reported studies. The invented method in the present investigation thus provides an integrated, efficient, eco-friendly, and cost-effective solution to wastewater treatment. PRACTITIONER POINTS: Effluent decolorization is about 68% in comparison with conventional activated carbon. The adsorbent was found to be three times more active than activated carbon. COD value decreased from 2,352 mg/L to about 150 mg/L on treatment with the novel adsorbent.

Adsorptive Removal of Malachite Green Dye onto Coal-Associated Soil and Conditions Optimization

The present research was investigated to eliminate the cationic dye (malachite green (MG)) from the water environment using coal-associated soil. The adsorbent material was characterized using scanning electron microscopy (SEM) and Fourier Transform Infrared Spectrophotometer (FTIR) analyses. Batch experiments were performed to investigate the different factors which affect the adsorption study. The maximum percentage removal of MG dye was attained as follows: adsorbent dose of 1.0 g/L (0.2 to 1.6 g/L), solution pH of 6.0 (2.0 to 9.0), temperature of 30°C (30 to 60°C), time contact of 60min (10 to 90 min), and dye’s concentration of 25 mg/L (25 to 150 mg/L). The adsorption isotherm was studied with four different isotherm models and results showed that the Freundlich isotherm model gave the best fit than the other nonlinear models to designate the isotherm behaviours with $R^2$ value of 0.9568, and the maximum adsorption capacity of coal-associated soil for MG dye adsorption is 89.97 mg/g. The evaluation of kinetic studies was performed by using three different kinetic models, where it exposed that pseudofirst order providing the best fit with $R^2$ value of 0.96 (25 to 150 mg/L). The thermodynamic parameters Gibbs free energy (ΔG°), entropy (ΔS°), and enthalpy (ΔH°) were endorsing that the present adsorption system was exothermic. Thus, the experimental results state that coal-associated soil could be an alternative material for the exclusion of dyes from water.

Strontium accumulation by the terrestrial and aquatic plants affected by mining and municipal wastewaters (Elazig, Turkey)

The mining and municipal wastewaters in the study area are located around Elazig, Turkey. This study investigated the translocation and accumulation of Sr into 9 terrestrial-aquatic plants from the Elazig municipal wastewater, Keban Pb-Zn and Maden Cu wastewaters. Plants and their soil samples were collected from the stream/rivers on the municipal and mining areas, and Sr values in both plant parts and their soils were analyzed by ICP-MS. The mean Sr concentrations in the soil, root and shoot of the terrestrial-aquatic plants were 101, 48.2 and 80.5 ppm, respectively (on the dried weight basis). The enrichment coefficients of root (ECR) and shoots (ECS) and translocation factors of studied plants were calculated and, then, divided into several groups as a candidate, bioaccumulator and hyperaccumulator plants according to their ECR and ECSs. These groups indicated the candidate plants: Salix sp. and Tamarix tetrandra; bioaccumulator plants: Pragmites sp. and Xanthium, and hyperaccumulator plants: Typha latifolia, Bolboscholnus ascbersus and Lythnium salicaria for Sr. These results showed that both bioaccumulator and hyperaccumulator plant groups had very high ability to accumulate strontium to plant parts from their soil. Therefore, these studied plants may be helpful/useful for the rehabilitation studies of municipal and mining soils contaminated by Sr.

Fabrication and characterization of Fe2O3, Bi2O3 and BiFeO3 and evaluation of their photo catalytic performances on degradation of methylene blue dye

This study reports the fabrication of Fe2O3, Bi2O3, and BiFeO3, characterization and evaluation of the photocatalytic performances for methylene blue dye degradation. The materials were synthesized by precipitation method and characterized by scanning electron microscopy, X-ray diffraction, energy dispersive X-rays analyses, and Fourier transform infrared analyses. The photocatalytic activities of Fe2O3, Bi2O3, and BiFeO3 were compared by performing degradation experiments with 50 mL of 100 mg/L methylene blue solution. The as-prepared BiFeO3 was found as 2.4 times and 1.7 times more effective than Fe2O3 and Bi2O3, with a 79, 47, and 57% catalytic activity, respectively. The degradation of methylene blue over the BiFeO3 catalyst was optimized in terms of pH, catalyst dosage, temperature, and methylene blue concentration. The Eley–Rideal mechanism was proposed to describe the reaction kinetics in terms of the first order and second order kinetics model. Activation energy E (kJ/mol), enthalpy ΔH (kJ/mol), entropy ΔS (J/mol) and free energy ΔG (kJ/mol) were calculated as 20.8, 18.2, 197.5 and −45.3 respectively. The negative value of free energy shows that photodegradation is favored in present conditions.

Graphene Oxide/Polyvinyl Alcohol/Fe3O4 Nanocomposite: An Efficient Adsorbent for Co(II) Ion Removal

In this work, an effective nanocomposite-based adsorbent directed to adsorb cobalt (Co²⁺) ion was successfully synthesized from graphene oxide (GO), polyvinyl alcohol (PVA), and magnetite (Fe₃O₄) nanoparticles via a coprecipitation technique. The synthesized GO/PVA/Fe₃O₄ nanocomposite was applied for Co²⁺ ion removal with the optimized working conditions including 100 min of contact time, 0.01 g of adsorbent dosage, pH of 5.2, and 50°C of temperature. The investigation of adsorption kinetics showed that the adsorption of Co²⁺ ion onto the GO/PVA/Fe₃O₄ nanocomposite followed the pseudo-second-order kinetic model with the rate constant k₂ being 0.0026 (g mg^-1·min^-1). The Langmuir model is suitable to describe the adsorption of Co²⁺ ion onto the GO/PVA/Fe₃O₄ nanocomposite with the maximum sorption capacity (q _max) reaching 373.37 mg·g^-1. The obtained results also indicated that the GO/PVA/Fe₃O₄ nanocomposite can adsorb/regenerate for at least 5 cycles with a little reduction in removal efficiency. Therefore, we believe that the GO/PVA/Fe₃O₄ nanocomposite could be used as a potential adsorbent for heavy metal treatment in terms of high adsorption capacity, fast adsorption rate, and recyclability.

A disc-chip based high-throughput acute toxicity detection system

Acute toxicity assay presents vital significance in modern environmental monitoring, including online detection and in-situ assay for emergency events. Although photobacteria related detection methods were established and verified in the past decades with combination of photomultiplier tube (PMT), the price and size of PMT sensor hampered application of rapid acute toxicity assay and detection system miniaturization, especially in the resource-limited occasions. Wide application of smartphones with great low-light performance cameras could be used in photobacteria-based toxicity assay instead of the PMT methods. Herein a box-type portable detection system had been successfully established, including a disc-chip for detection, detection device, and smartphones with a high-performance camera. The system performed well showing stable temperature and rotation control. Results captured by CMOS-based camera presented a linear relationship with PMT-based detection method. An image progress algorithm was also established and tested by series diluted zinc sulfate solution as a reference substance. The system also performed well for toxicity analysis for real Atmospheric particle matter sample. The system could be used in some environmental monitoring scenarios as an alternative solution.

Kinetics, equilibrium and thermodynamics of dyes adsorption onto modified chitosan: a review

In view of promising sorption capacity, stability, biodegradability, cost-effectiveness, environmental friendly nature, regeneration and recycling ability, the chitosan (CS) based adsorbents are highly efficient for the sequestration of dyes. Since CS offers variable chemical structures and CS have been modified by incorporating different moieties. The CS composites with unique properties have been employed successfully for dye adsorption with reasonably high adsorption capacity versus other similar adsorbents. Modifications of CS were promising for the preparation of composites that are extensively studied for their adsorption capacities for various dyes. This review highlights the CS and its modification and their applications for the adsorption of dyes. The removal capacities of CS-based adsorbents, equilibrium modeling, kinetics studies and the thermodynamic characteristics are reported. Moreover, the FTIR, BET, SEM, TGA and XRD were employed for the characterization of CS modified adsorbents are also discussed. Results revealed that the modified CS is highly efficient and can be employed for the sequestration of dyes from effluents.

Kinetics, equilibrium and thermodynamics of dyes adsorption onto modified chitosan: a review

In view of promising sorption capacity, stability, biodegradability, cost-effectiveness, environmental friendly nature, regeneration and recycling ability, the chitosan (CS) based adsorbents are highly efficient for the sequestration of dyes. Since CS offers variable chemical structures and CS have been modified by incorporating different moieties. The CS composites with unique properties have been employed successfully for dye adsorption with reasonably high adsorption capacity versus other similar adsorbents. Modifications of CS were promising for the preparation of composites that are extensively studied for their adsorption capacities for various dyes. This review highlights the CS and its modification and their applications for the adsorption of dyes. The removal capacities of CS-based adsorbents, equilibrium modeling, kinetics studies and the thermodynamic characteristics are reported. Moreover, the FTIR, BET, SEM, TGA and XRD were employed for the characterization of CS modified adsorbents are also discussed. Results revealed that the modified CS is highly efficient and can be employed for the sequestration of dyes from effluents.

Biomarker-based evaluation of cytogenotoxic potential of glyphosate in Vigna mungo (L.) Hepper genotypes

Herbicides have proven to be a boon for agricultural fields. Their inherent property to kill weeds and unwanted vegetation makes them an essential biological tool for farmers and agricultural systems. Besides being capable of destroying weeds, they also exhibit certain effects on non-target crop plants. In the present study, a laboratory experiment was performed to assess the effect of glyphosate on Vigna mungo root meristem cells. Seeds of five different genotypes of V. mungo were treated with a series of concentrations of glyphosate ranging from 1 to 10 mM, and their effects on mitotic cell division were studied. Healthy and uniform-sized seeds were selected and were allowed to grow in Petri plates for 3 days, and all the doses were maintained in triplicates. Roots were fixed at day 3 after treatment (DAT) for cytological microscopic slide preparation. The results obtained indicate the dose-dependent reduction in the mitotic index in all the genotypes and an increase in the percentage of chromosomal aberrations (CAs) and relative abnormality rate (RAR). Most commonly observed chromosome aberrations at lower doses (< 6 mM) were fragments, stickiness, and disoriented metaphase, while at higher doses (6 to 10 mM) bridges, laggards, spindle disorientation, and clumping were obvious. The increase in the percentage of CAs and RAR indicates the inhibitory effect of glyphosate on cell cycle progression at various stages in root tip cells. The present study is a fine example of a biomarker-based genotoxic assessment of mitotic damage caused by glyphosate.

Removal of uranium(VI) from aqueous solution by Camellia oleifera shell-based activated carbon: adsorption equilibrium, kinetics, and thermodynamics

Camellia oleifera shell-based activated carbon (COSAC) was prepared by H₃PO₄ activation method and further used to remove U(VI) from the aqueous solution in a batch system. This research examined the influence of various factors affecting U(VI) removal, including contact time, pH, initial U(VI) concentration, and temperature. The results showed that the U(VI) adsorption capacity and removal efficiency reached 71.28 mg/g and 89.1% at the initial U(VI) concentration of 160 mg/L, temperature of 298 K, pH 5.5, contact time of 60 min, and COSAC dosage of 2.0 g/L. The pseudo-first-order, pseudo-second-order, and intraparticle diffusion equations were used to identify the optimum model that can describe the U(VI) adsorption kinetics. The pseudo-second-order kinetics model performed better in characterizing the adsorption system compared with the pseudo-first-order and intraparticle diffusion models. Isotherm data were also discussed with regard to the appropriacy of Langmuir, Freundlich, Temkin, and Dubinin-Radushkevich models. The Langmuir model described the U(VI) adsorption process the best with a maximum adsorption capacity of 78.93 mg/g. Thermodynamic analysis (ΔG⁰ < 0, ΔH⁰ > 0, and ΔS⁰ > 0) indicated that the U(VI) adsorption process is endothermic and spontaneous. All the results imply that COSAC has a promising application in the removal or recovery of U(VI) from aqueous solutions.

Improved performance of immobilized laccase on Fe3O4@C-Cu2+ nanoparticles and its application for biodegradation of dyes

An effective strategy for enhancement of catalytic activity and stability of immobilized laccase via metal affinity adsorption on Fe₃O₄@C-Cu²⁺ nanoparticles was developed, which involved the fabrication of hydroxyl and carboxyl functionalized Fe₃O₄@C nanoparticles via a simple hydrothermal process and the subsequent chelation with Cu²⁺ for the immobilization of laccase under a mild condition. Our results revealed that the Fe₃O₄@C-Cu²⁺ nanoparticles possess a high loading amount of bovine serum albumin (BSA, 436 mg/g support) and laccase activity recovery of 82.3 % after immobilization. Laccase activity assays indicated that thermal and pH stabilities, and resistances to organic solvents and metal ions of the immobilized laccase were relatively higher than those of the free enzyme. The immobilized laccase maintained more than 61 % of its original activity after 10 consecutive reuses. Most importantly, the immobilized laccase possessed excellent degradation of diverse synthetic dyes. The degradation rates of malachite green (MG), brilliant green (BG), crystal violet (CV), azophloxine, Procion red MX-5B, and reactive blue 19 (RB19) was approximately 99, 93, 79, 88, 75 and 81 (%) in the first cycle. Even after 10 consecutive reuses, the removal efficiencies of the six dyes were found to be 94, 80, 71, 78, 60, and 65 (%), respectively.

Poisonous medicinal plants used in the popular pharmacopoeia of the Rif, northern Morocco

Popular herbal medicine has served as a unique health provider for human beings for thousands of years. In the present study, we document the toxic plants used as medicines in the Rif, intending to assess the knowledge of indigenous people on the toxicity of the natural products used. Ethnobotanical survey was conducted in the Rif, northern Morocco between June 2016 and June 2018 using semi-structured questionnaires and focus groups. An investigation of the scientific literature was conducted to sustain or verify the claimed toxicological information. A total of 84 species of plants belonging to 67 genera and 30 families were reported as being used in the prevention and treatment of diseases. The families reported to be most representatives of these kinds of plants are Asteraceae and Fabaceae (7 species). However, the highly toxic plant prescribed was Rosmarinus officinalis L. Leaf was the most commonly used plant part, and the majority of herbal remedies were prepared from a decoction (40.6%). The results of this investigation showed that the local people in the Rif are still dependent on herbal medicine. These species used for remedial purposes are noted to have a potential toxic impact associated with their irrational consumption. Therefore, we recommend that attention should be observed when using them as medicinal sources.

Polydopamine Microsphere-Incorporated Electrospun Fibers as Novel Adsorbents for Dual-Responsive Adsorption of Methylene Blue

The usually inconvenient detection and uneasy recycling of polydopamine (PDA) with sphere morphology as an adsorbent restrict its actual applications in wastewater purification. Thus, novel composite fibers were fabricated via the electrospinning technique by integrating polydopamine microspheres (PDA-MPs) with pH/temperature dual-responsive copolymers. The insoluble fraction of the fabricated composite fibers can be maintained to a value above 89% after being immersed in aqueous solutions with different pH values. Also, the regeneration efficiency of the composite fibers can also remain above 80% after undergoing five adsorption-desorption cycles. These results both indicated that the fabricated composite fibers can avoid secondary pollution during the adsorption process effectively. In addition, the presence of abundant N-isopropyl acrylamide (NIPAM) units within the fibers could make it have a relatively higher water swelling ability of 4643%, which could further offer relatively larger inner spaces to accommodate the dye molecules. Meanwhile, by incorporating β-cyclodextrin (β-CD), methacrylic acid (MAA), PDA, and NIPAM components, plentiful active adsorption sites could be supplied to interact with methylene blue (MB) dye. So, the adsorption experiments of the composite fibers showed a maximum adsorption capacity of 1722.1 mg/g at pH 9.0 and a temperature of 55 °C. Furthermore, the pseudo-second-order kinetic model of adsorption suggested that it is a chemisorption process. Moreover, the adsorption experimental data can be better described by Langmuir models, inferring its monolayer adsorption. The adsorption thermodynamic studies revealed that adsorption is a spontaneous and endothermic process. Also, the increase of temperature facilitated the adsorption processes, owing to the increase of adsorbent's hydrophobicity and molecules' reactivity. The present work suggested that the combination of smart-responsive polymers and PDA-MPs could form an unprecedented system to be a promising candidate adsorbent for wastewater treatment.

ZnO, CuO and Fe2O3 green synthesis for the adsorptive removal of direct golden yellow dye adsorption: kinetics, equilibrium and thermodynamics studies

In the present investigation, ZnO, CuO and Fe2O3 were prepared via green route and utilized for the sequestration of DGY (Direct Golden Yellow) dye. Affecting variables i.e., temperature, contact time, adsorbent dose and pH were optimized for maximum sequestration of dye from aqueous medium. The pH 2, adsorbent dose 0.1 g/50 mL dye solution, temperature 30 °C and 50 mg/L dye initial concentration were best levels for efficient dye adsorption and equilibrium was attained in 30 min reaction time. The dye sequestration on to ZnO, CuO and Fe2O3 was an exothermic process. Freundlich and Temkin adsorption isotherms explained well the dye adsorption onto nanoadsorbents and dye adsorption followed pseudo first order kinetic model. Effect of electrolytes and heavy metal ions was also investigated and both affected the adsorption process significantly. In the presences of surfactant/detergent, the removal of dye was reduced and 0.5 N NaOH efficiently desorbed the dye from nanoadsorbents. Findings depicted that the nanoadsorbents are effectual for the sequestration of DGY dye, which can be employed for the remediation of textile effluents.

A functionalized tannin-chitosan bentonite composite with superior adsorption capacity for Cr(VI)

A novel functionalized tannin-chitosan bentonite composite (TCBC) was successfully synthesized. The formation of the composite was confirmed by the X-ray diffraction (XRD) patterns and Fourier transform infrared spectroscopy (FT-IR) analysis. The pHpzc of TCBC was 3.38. The influences such as pH, dosage of TCBC, temperature and initial Cr(VI) concentration on adsorption capacity were investigated. The experimental data indicated that the almost saturated adsorption of the TCBC towards Cr(VI) in 100 min. The maximum adsorption capacity was 262.08 mg/g at 333 K with initial pH = 2.5. The adsorption kinetics of Cr(VI) on TCBC followed the pseudo-second-order kinetics model. The isothermal data were well described by the models of Langmuir, Freundlich and Temkin. The results revealed that the adsorption of Cr(VI) on TCBC existed comprehensive effects and mainly belong to the chemisorption. The TCBC could keep good performances (q e = 192.17 mg/g) in five runs, 1 M NaOH was used as eluent for desorption, which showed a high desorption efficiency. Studies showed TCBC prepared with low cost and green raw materials, and simple green preparation technology had high adsorption capacity, good reusability and acidic tolerance. By exploring the Cr(VI)-Cr(III) hybrid system, part of Cr(VI) was reduced to Cr(III) and adsorbed by TCBC. The optimal adsorption pH of Cr(III) was 5.0.

Biocomposite of sodium-alginate with acidified clay for wastewater treatment: Kinetic, equilibrium and thermodynamic studies

Clay-based composites were prepared, characterized, and applied for the elimination of Blue FBN (BFBN) and Rose FRN (RFRN) dyes. The Fourier transform infrared spectroscopy (FTIR), scanning electron microscope (SEM), Thermogravimetric (TGA) and X-ray diffraction analyses were performed to check the interaction of dye molecule with adsorbents. The analysis showed a successful interaction between adsorbent and dyes ions. The experimental data was best fitted with Freundlich isotherm for both dyes (BFBN and RFRN). The findings revealed that at 80 min the adsorption grasped equilibrium in the case of both dyes and succeeded the pseudo-second-order kinetics model. Furthermore, the enthalpy (ΔH°), Gibbs free energy (ΔG°) and entropy (ΔS°) changes suggested that adsorption was exothermic, physical and spontaneous in nature. The maximum adsorption capacities were determined as 76.39% for BFBN and 59.85% for RFRN dye at pH 2.0 and 30 °C. Composites found to be stable at higher temperature and regenerated using MgSO₄ eluting agent. The textile effluent colour was removed up to 50.35 and 54.95% using raw and modified clay, respectively. The modified clay showed promising efficiency for adsorption of synthetic BFBN and RFRN dyes from aqueous solution, which could be a viable option for the treatment of industrial wastewater and textile effluents.

Environmental and health impacts due to e-waste disposal in China - A review

E-waste is discarded and shipped mostly to developing countries located in Asian continent for disposal from other developed countries. Especially 70% of the world's e-waste ends up in Guiyu, a small town located in Guangdong Province of China. As little as 25% is recycled in formal recycling centers with adequate protection for workers and the other e-waste arrived in those areas is not handled in organized manner. As per reports only roughly 12.5% of e-waste is actually recycled, and the recycling efforts in those regions are primitive and result in toxic substances being leached into the surrounding ecosystems. In addition to persistent organic pollutants, there are many heavy metals found in the ground and river sediments in Guiyu, exceeding the threshold set to protect human health. Those areas are no longer suitable for growing food, and water is unsafe for drinking, due to the amount of toxins leached into the groundwater and land. Hazardous threats to environment and human health due to hazardous substances of e-waste all around China, as well as the current e-waste management were documented in this review. The article concludes with controlled contamination sources, and eco-friendly and efficient remediation technologies to solve e-waste problem in China.

Removal of Ammonium from Aqueous Solutions Using Zeolite Synthesized from Electrolytic Manganese Residue

This paper carried out the study on removal of ammonium from aqueous solutions by zeolite derived from electrolytic manganese residue (EMR) via a fusion method. The variables of pH, contact time, EMRZ (EMR-based zeolite) dosage, initial ammonium concentration, and competitive cations and anions on the ammonium uptake capacity were systematically investigated in an attempt to illustrate adsorption performance of EMRZ. The results show that these influence factors had a remarkable impact on the ammonium uptake capacity of EMRZ. Maximum ammonium uptake capacity was achieved at pH value 8.0, EMRZ dosage 0.2 g/100 mL, contact time 100 min, initial ammonium concentration 200 mg/L, and temperature 35°C. Under optimized conditions, ammonium uptake capacity onto EMRZ was up to 27.89 mg/g. The competitive degree of cations in ammonium adsorption process follows the sequence of Na+>K+>Ca2+>Mg2+, and the sequence of anion effect on ammonium removal onto EMRZ is CO32− > Cl− > SO42− > PO43−. The adsorption kinetic was explored and best represented by pseudo-second-order kinetic model. And the adsorption isotherm experimental data had best fitness with the Freundlich and Koble–Corrigan model, suggesting that heterogeneous uptake was the principal mechanism adopted in the process of ammonium adsorption. Moreover, calculation of thermodynamic parameters such as change in free energy (ΔG), enthalpy (ΔH), and entropy (ΔS) was carried out and it was determined to be −15.77∼−14.03 kJ·mol−1, +37.66 kJ·mol−1, and +173.38 J·mol−1·K−1, respectively. These parameters confirmed that ammonium uptake onto EMRZ was an endothermic and spontaneous process. Moreover, no obvious deterioration tendency was observed for the regenerated EMRZ compared with fresh EMRZ. These results indicate that EMRZ has wide application prospects in removing ammonium from wastewater.

Earthworm Eisenia andrei modulates oxidative stress in bean plants Vicia faba irrigated with treated wastewater

With respect to reducing the pressure on freshwater resources, treated wastewater (TWW) irrigation represents a sustainable alternative in agriculture. Due to their low quality and variable composition, TWW could entail harmful consequences for living organisms in terrestrial ecosystems. This study aims to evaluate how earthworm (Eisenia andrei) can modulate oxidative stress in bean plants (Vicia faba) that are irrigated over a course of 60 days with two doses of TWW (50 and 100%) in addition to a control condition (0%) irrigated with distilled water. This is achieved by measuring glutathione-S-transferase (GST) activity and malondialdehyde accumulation (MDA) in plants. Furthermore, catalase (CAT), GST, MDA, and acetylcholinesterase (AChE) activities of the earthworms are also assessed. Our results show that growth and physiological parameters are modified when applying TWW irrigation. Moreover, oxidative stress apprehended by GST activity and MDA accumulation is exacerbated in V. faba plants after exposure to increased TWW doses. Similarly, TWW irrigation enhances oxidative stress parameters in earthworms with a crucial decrease in AChE activity. In addition, the presence of earthworms increases growth and physiological parameters; it also results in a significant reduction in GST activity and MDA rate in V. faba plants. Our results provide new insights into the impact of TWW irrigation on soil organisms and the importance of earthworms in the reduction of oxidative stress in plants.

Effective Sequestration of Phosphate and Ammonium Ions by the Bentonite/Zeolite Na-P Composite as a Simple Technique to Control the Eutrophication Phenomenon: Realistic Studies

A bentonite/Zeolite-P (BE/ZP) composite was synthesized by controlled alkaline hydrothermal treatment of bentonite at 150 °C for 4 h for effective sequestration of phosphate and ammonium pollutants. The composite is of 512 m²/g surface area, 387 meq/100 g ion-exchange capacity, and 5.8 nm average pore diameter. The experimental investigation reflected the strong effect of the pH value in directing the uptake behavior and the best results were attained at pH 6. The kinetic properties showed an excellent agreement for phosphate and ammonium adsorption results with the pseudo-second-order model showing equilibrium intervals of 600 and 360 min, respectively, and maximum experimental capacities of 170 and 155 mg/g, respectively. Additionally, their equilibrium modeling confirmed excellent fitness with the Langmuir hypothesis, signifying homogeneous and monolayer uptake processes with a theoretical q _max of 179.4 and 166 mg/g for phosphate and ammonium, respectively. Moreover, the calculated Gaussian adsorption energies of phosphate (0.8 kJ/mol) and ammonium (0.72 kJ/mol) suggested physisorption for them with mechanisms close to the zeolitic ion-exchange process or the coulumbic attractive forces. This was supported by the assessed thermodynamic parameters which also suggested spontaneous uptake by endothermic reaction for phosphate and exothermic reaction for ammonium. The BE/ZP composite is of excellent reusability and used for eight recyclability runs achieving removal percentages of 61.5 and 74.5% for phosphate and ammonium, respectively, in run 8. Finally, the composite was applied in the purification of sewage water and groundwater, achieving complete removal for phosphate from sewage water and ammonium from groundwater and reduction of the ammonium ions in the sewage water to 2.3 mg/L.

Elimination of the hormesis phenomenon by the use of synthetic sea water in a toxicity test towards Aliivibrio fischeri

Hormesis is an ecotoxicological phenomenon referred to as the biphasic dose-response effect. At a low concentration of toxic substances, a hormetic stimulating effect occurs, while an inhibitory effect occurs at higher concentrations. The phenomenon of hormesis may hinder the interpretation of toxicity test results and lower the actual toxicity of test samples. In this study, a hormesis phenomenon was observed and analysed during toxicity tests of wastewater from constructed wetlands containing two pharmaceutical substances, diclofenac (DCF) and sulfamethoxazole (SMX), against the marine bacteria Aliivibrio fischeri. To eliminate the hormesis phenomenon, a change in the diluent (ISO 11348-3:2007) to synthetic sea water (ISO 10253:2006) is proposed. The hormesis phenomenon was observed only during the analysis of wastewater toxicity with the standard toxicity test (with the diluent). The use of synthetic sea water eliminated the hormetic effects because of the presence of additional components in the sea water, such as MgCl₂, Na₂SO₄, CaCl₂, KCl, NaHCO₃, and H₃BO₃, which increased the sensitivity of A. fischeri to the pharmaceutical substances. The use of different media in toxicity tests may have significant effects on the toxicity classification of the tested compounds or wastewater. Additionally, the toxicity of tested pharmaceuticals towards A. fischeri was analysed. The IC₅₀ values of DCF were 8.7 ± 1.1 mg L^-1 (for diluent) and 13.9 ± 0.9 mg L^-1 (for synthetic sea water) whereas those of SMX were 50.5 ± 2.3 and 55.3 ± 1.6 mg L^-1, respectively.

Adsorption, Modeling, Thermodynamic, and Kinetic Studies of Methyl Red Removal from Textile-Polluted Water Using Natural and Purified Organic Matter Rich Clays as Low-Cost Adsorbent

Clay minerals have large surface areas that contribute to their high adsorption capacity. Pure clays were often used. However, their prices remain expensive. However, the natural clay minerals that are locally available can have economic and environmental benefits for textile wastewater treatment. The tested natural clays had given low removal yields. Therefore, we wanted to test particular rich organic matter clay for adsorbing azo dye, which is a very toxic molecule. In order to make the use of this clay type have a better efficiency for removal of this dye from the polluted waters, the optimal conditions had been specified. The results indicated that advised conditions were as follows: 5 min was the contact time of dye-clay; the better adsorbent masses were 0.25 g and 0.5 g per 100 ml solution for raw (ANb) and purified clays (ANp), respectively; the initial dye concentrations were 1 gL−1 for raw clay and 50 mgL−1 for purified clay; pH solution had any effect on the yield of dye removal only when raw clay was used; however, acid environment was advised when purified clay was the adsorbent and for the two tested clays about 20–30°C was the better solution temperature. X-Ray diffraction, Fourier transform infrared (FTIR) spectroscopy, and scanning electron microscopy (SEM) analysis confirmed that functional groups of clay adsorbed the dye. Langmuir maximum adsorption capacities of ANb and ANp were found to be 397 mgg−1 and 132.3 mgg−1 at pH 7 and 5, respectively. Raw and chemically activated samples gave similar results. Adsorption of ANb and ANp data showed better agreement with the pseudo-second-order kinetic model. Thermodynamic parameters of the two adsorbents confirmed that the adsorption was endothermic (ΔH > 0) and spontaneous (ΔG0 < 0). Energy level was high when purified clay was used; however, it was significantly lower when the adsorbent was raw clay. Therefore, it was likely that adsorption by carbonates and organic matter involved small energy amounts. Comparing between these and other previous results, Jebel Louka natural clay type is better recommended for MR removal from textile wastewater, since the removal yield was about 98%. Hence, this tested clay type could provide an alternative low-cost material that could be used in treatment of the textile wastewater rich in MR and the obtained adsorption model and desorption tests provided a background for pilot and industrial scale applications.

Salinity decreases cadmium accumulation in Vicia faba

The study investigates the effect of cadmium (Cd), salinity (NaCl), and combined stress on rhizosphere pH, growth parameters, membrane leakage, and genotoxicity in Vicia faba. Germinated seeds were exposed for 48 h to 0.01 mM Cd(NO₃)₂ (Cd), 50 mM NaCl (S50), 150 mM NaCl (S150), and Cd-NaCl (CdS50 and CdS150). An accumulation of Cd and Na was found essentially in Vicia roots under each single stress factor associated with variations in rhizosphere pH. Additional NaCl in metallic solution significantly dropped the rhizosphere pH and decreased Cd concentrations in roots by 2.3 and 3.8 times for CdS50 and CdS150, respectively. Growth parameters (root length and fresh and dry matters), mitotic activity, and micronucleus formation were not influenced by Cd and low concentration of NaCl when applied separately or together, while 150 mM of NaCl, alone or combined with Cd, affected negatively all the studied parameters, as well as chromosome and nucleus stability. V. faba seems to reduce the transport of Cd in saline conditions and therefore salinity (50 mM) may act as a protection against Cd accumulation.

Degradation behaviors of Isopropylphenazone and Aminopyrine and their genetic toxicity variations during UV/chloramine treatment

Combination of ultraviolet and chloramine (i.e., UV/chloramine) treatment has been attracting increasingly attention in recent years due to its high efficiency in removing trace organic contaminants. This study investigated the degradation behaviors of two pyrazolone pharmaceuticals (i.e., Isopropyl phenazone (PRP) and Aminopyrine (AMP)) and their genetic toxicity variations during UV/chloramine treatment. The results showed that chloramine could hardly degrade PRP and AMP, while UV/chloramine greatly increased the observed first-order rate constant (k_obs) of PRP and AMP degradation. The quenching and probe experiments illustrated that the reactive chlorine species (RCS) contributed dominantly to PRP removal, and hydroxyl radical (HO^•) was the major contributor to the degradation of AMP, while the reactive amine radicals (RNS) could hardly degrade them. The overall degradation rates of PRP and AMP decreased as pH increased from 6.5 to 10. The k_obs of PRP and AMP increased along with NH₂Cl dosage increasing and reached a plateau at higher concentrations (0.2-0.5 mM). The present background carbonate (HCO₃^-, 1-10 mM), chloride (Cl^-, 1-10 mM) and natural organic matter (NOM, 5-10 mg-C L^-1) exhibited inhibition impacts on PRP and AMP degradation. In addition, the intermediates/products of PRP and AMP were identified and their general degradation pathways were proposed to be hydroxylation, deacetylation, and dephenylization. Specifically, Cl-substitution was inferred during PRP degradation, while demethylation in tertiary amine group was only observed in AMP degradation. These mechanisms including the main reactive sites of PRP and AMP were further confirmed by the frontier orbitals calculation. Moreover, the results of the genetic toxicity according to the micronucleus test of Viciafaba root tip indicated that UV/chloramine treatment could partially reduce the genetic toxicity of PRP and AMP.

Assessment of impact of α-Fe2 O3 and γ-Fe2 O3 nanoparticles on phytoplankton species Selenastrum capricornutum and Nannochloropsis oculata

In this study, the impact of alpha-iron oxide (α-Fe₂ O₃ , 20-40 nm) and gamma iron oxide (γ-Fe₂ O₃ , 20-40 nm) nanoparticles (NPs) on phytoplankton species Selenastrum capricornutum and Nannochloropsis oculata was investigated Characterizations of the NPs were systematically carried out by TEM, dynamic light scattering, zeta potential, X-ray diffraction, SEM, and Fourier transformation infrared spectroscopy. Acute toxicity was tested between 0.2 and 50 mg/L for each NP for a period of 72 hours exposure. γ-Fe₂ O₃ NP inhibited development of N oculata at the rate of 54% in 0.2 mg/L group with a high mortality rate of up to 82%. α-Fe₂ O₃ NPs were less toxic that induced 97% mortality on N oculata at 10 mg/L suspensions. In contrast, α-Fe₂ O₃ NP inhibited growth of S capricornutum strongly (73%) in 0.2 mg/L group. γ-Fe₂ O₃ NPs showed similar growth inhibition (72%) on S capricornutum in 10 mg/L suspensions. Despite the differential effects, the results indicated acute toxicity of α-Fe₂ O₃ and γ-Fe₂ O₃ NPs on N oculata and S capricornutum.

Biosorptive interaction of alkaline modified Dialium guineense seed powders with ciprofloxacin in contaminated solution: central composite, kinetics, isotherm, thermodynamics, and desorption

This work evaluated the use of Dialium guineense seed waste (DGS) and its sodium hydroxide modified form (NH-DGS) as biosorbent for ciprofloxacin (CPF) from synthetic solution as well as the desorption potentials. Central composite design (CCD) was applied for optimization of the alkaline treated biosorbent by response surface methodology using design expert. Both biosorbents were characterized by FTIR, SEM, EDX, and BET analysis. The CCD showed NaOH concentration of 0.46 M and temperature of 96 °C to be effective for optimized modification of NH-DGS. Optimum removal of CPF was obtained at pH 6.0, contact time 120 min, temperature 300 K, and dosage of 0.1 g. The Freundlich model gave the best fit compared to the other isotherms tested with R² values >0.97951. NH-DGS exhibited a maximum uptake capacity of 120.34 mg/g higher than some reported adsorbents for CPF. The pseudo-second-order model was suitable in the fitting of the kinetic data. A non-spontaneous process was obtained for CPF biosorption on DGS which became spontaneous after alkaline treatment. Over 84% desorption of CPF was achieved on both biosorbents using 0.3 M HCl which envisaged the use of NH-DGS as an efficient material for treatment of waters contaminated with CPF.

Phyto-genotoxicity of arsenic contaminated soil from Lakhimpur Kheri, India on Vicia faba L

The present experiment was designed to evaluate physico-chemical characteristics and phyto-genotoxicity of arsenic (As) contaminated soil collected from different sites of Lakhimpur, Uttar Pradesh (UP), India by employing Vicia faba L. The analyses included various biochemical as well as cyto-genotoxicity assays. The results showed that soil pH was slightly acidic to neutral in nature. The bulk density (1.18-1.23 gcm^-3), particle density (2.51-2.59 gcm^-3) and porosity (44-53%) varied in different places. The level of available nutrients, nitrogen, phosphorus and potassium was found to vary as 124-165 mgkg-1, 173-186 mgkg-1 and 48-98 mgkg-1, respectively. The maximum As levels were found in soil of Fulvareya (27.13 mgkg-1) and Atareya (24.12 mgkg-1), the level of As in water samples of these sites were 0.19 mgl^-1and 0.21 mgl^-1, respectively. Phytotoxicity of the As present in soils was evident through significant increases in stress metabolites, hydrogen peroxide (H₂O₂), malondialdehyde (MDA) and carbonyl groups in root and shoot of V. faba. Cyto-genotoxic effects were also seen through reduced mitotic index (MI) and increased mitotic depression (MD), relative abnormality rate (RAR) as well as other chromosomal abnormalities along with micronuclei in root meristematic cells of V. faba. The phytotoxicity and cyto-genotoxicity assessment suggests the harmful soil properties that might affect biota.