Thallium contamination in farmlands and common vegetables in a pyrite mining city and potential health risks

Geochemical distribution and speciation of thallium in groundwater impacted by acid mine drainage (Southern China)

Thallium (Tl) commonly occurs in shallow groundwater affected by acid mine drainage (AMD); however, our knowledge of the occurrence of Tl in shallow groundwater is limited. This study observes that the shallow groundwater in an AMD-impacted area in Southern China contains an elevated Tl concentration (22 μg/L) under the oxidizing conditions and a low Tl concentration (<1 μg/L) in the reducing environment. The groundwater Tl concentration is positively correlated with oxidation-reduction potential (Eh) and negatively correlated with Cl content. The modelling results of the Tl species demonstrate that Tl⁺, TlSO₄^-, TlCl, and TlNO₃ are the main forms of Tl in groundwater. Tl may precipitate as Tl(OH)₃ under weakly acidic to alkaline conditions. Drill-core analysis of wells indicates that the Tl content in the vadose zone is equal to the background soil Tl content under oxidizing conditions. However, under artificial reducing conditions, the Tl content at the 3-4 m depth below the groundwater level ranges from 1.6 to 3.5 μg/g. This finding demonstrates that Tl solute in groundwater migrates into the aquifer when redox conditions change. Mn-oxides and illite in the weak permeable aquifer are the key minerals for Tl adsorption; some major sites of illite start to uptake Tl from pH 8.0. This study highlights not only the geochemical distribution of Tl in groundwater but also the influences of changes in redox conditions caused by human activities on Tl enrichment in groundwater. Enhancing our understanding of the aqueous geochemistry of Tl is of significance for the prevention and control of Tl pollution.

Source-specific ecological and health risks of potentially toxic elements in agricultural soils in Southern Yunnan Province and associated uncertainty analysis

Source-specific risk apportionment is critical to prevent and control soil potentially toxic element (PTE) pollution. This study explored source-specific ecological and human health risks of soil PTEs in Southern Yunnan Province. Geochemical baseline values were determined to assess the pollution level of PTEs; then source-specific risk was apportioned combining positive matrix factorization (PMF) with ecological and human health risk assessment. Obvious accumulation of As, Cd, Pb, and Zn was observed in this area, especially Cd in 21.33% of the samples exhibited significant enrichment. Four sources were quantified based on PMF assisted with GIS-mapping: natural sources (41.49%), traffic emissions (24.70%), industrial activities (17.48%), and agricultural activities (16.33%). Industrial activities were the largest source (64.55%) to ecological risk. Agricultural activities were regarded as the major contributor to non-carcinogenic (adults: 75.93%, children: 62.33%) and carcinogenic risks (adults: 55.97%, children: 56.36%). Non-carcinogenic and carcinogenic risks for children were higher than adults, and their health risks showed similar trend. Thus, agricultural activities should be regarded as a priority to reduce health risk, whereas industrial activities should be given priority to control ecological risk. Although source-specific risk was quantified, combination with bioavailability and interactions of PTEs are necessary to obtain more accurate results in future.

Escalating health risk of thallium and arsenic from farmland contamination fueled by cement-making activities: A hidden but significant source

Soil-to-vegetable migration of toxic metal(loid)s is a pivotal pathway of human exposure to chemical intoxication. Thallium (Tl) and arsenic (As) are highly toxic metal(loid)s but their co-occurrence in soils and vegetables remain poorly understood. Herein, the present study focuses on potential health risk arising from co-occurrence of TlAs in various common vegetables cultivated in different farmlands around an industrial area featured by cement production activities. The results reveal obvious co-contamination of Tl (2.28 ± 1.39 mg/kg) and As (102.0 ± 66.7 mg/kg) in soils. Fine particles bearing sulfide and other minerals associated with Tl and As are detected in fly ash from cement plant, which can be migrated by wind over a long distance with hidden but inevitable pollution. Bioaccumulation Factor (BCF) and Enrichment Factor (EF) show that taro and corn preferentially accumulate Tl especially in underground parts. Hazard Quotient (HQ) indicates that consumption of these vegetables may result in chronic poisoning and/or even carcinogenic risk. The study highlights that the pathway and high risk of co-contamination of TlAs in the nearby farmlands posed by cement-making activities should be highly concerned.

Pedogeochemical distribution of gallium, indium and thallium, their potential availability and associated risk in highly-weathered soil profiles of Taiwan

Gallium (Ga), indium (In), and thallium (Tl) are emerging soil contaminants. Profile distribution of total content and available form as well as assessing the contamination degree of these elements in highly-weathered soils have not been studied. Consequently, the aim of this study was to determine the distribution of total (HF-digestion) and available (EDTA-extracted form) content of Ga, In, and Tl in eleven soil profiles collected from aged fluvial materials on the Quaternary terraces representing highly-weathered soils (Ultisols and Oxisols) in Taiwan as affected by soil properties. We also assessed the soils contamination degree using indices including enrichment factor (EF), geo-accumulation index (I_geo), and pollution loading index (PLI). The total element content varied from 9460 to 2340 μg kg^-1 for Ga, 4.77-37.1 μg kg^-1 for In, and from 55.7 to 206 μg kg^-1 for Tl. The elements showed different profile distribution in the soils. Soil contamination degree was low in all profiles according to the I_geo and PLI values, but the contamination degree according to the EF was severe for Ga and minor or moderate for In in selected horizons of some profiles. The median content of EDTA-extracted Ga, In, and Tl accounted for 24.0, 8.70, and 5.1% of the total content, respectively. The available Ga and Tl can be predicted by a function of total element and clay using multivariate linear regression analysis. The available In was not able to be predicted by a significant fit of the regression with total In and the studied soil properties, and thus we require more assessment approaches of In availability for the soils in the future.

Mechanical Properties and Toxicity Risks of Lead-Zinc Sulfide Tailing-Based Construction Materials

The leaching residue of the lead-zinc sulfide tailing (LRT) is the only residue generated from the tailing leaching recovery process; it is a typical hazardous material for its high heavy-metal contents and high acidity. Due to the large output of LRT, and because its main components are Ca, Si, and Al, the preparation of building construction materials with LRT was studied. The results showed that when the LRT addition is less than 47%, with the ordinary Portland cement (OPC) and fly ash (FA) added and the curing conditions appropriate, the strength values of the tested specimens meet the M15 Class of the autoclaved lime sand brick standard (GB/T 16753-1997). The carbonization coefficient and drying shrinkage of the specimen were 0.79 and smaller than 0.42, respectively. As the SEM, TG, and XRD analysis have shown, the LRT can chemically react with additives to form stable minerals. The heavy metal contents that were leached out well met the limits in GB5085.3-2007. Based on the high addition of the LRT, the good strength and lower heavy metals were leached out of the prepared test specimen, and the tailing could be reused completely with the leaching recovery and the LRT reuse process. LRT can be used to replace OPC, allowing more sustainable concrete production and improved ecological properties of LRT.

Causal Analysis of Ecological Impairment in Land Ecosystem on a Regional Scale: Applied to a Mining City Daye, China

We adopted a weight of evidence approach to establish a causal analysis of an impaired land ecosystem on a regional scale; namely, Daye, a traditional mining city in China. Working processes, including problem statements, a list of candidate causes, and a conceptual model were developed to represent a causal hypothesis for describing land degradation. Causal criteria were applied to integrate multiple lines of evidence. Then, various pieces of evidence were scored to either strengthen or weaken our causal assumptions. Results showed that habitat alteration, heavy metal accumulation, organic pollutants, water eutrophication, and nutrient runoff were the probable causes of land ecosystem impairment in Daye. Meanwhile, noxious gas, toxicants, altered underground runoff, atmospheric deposition, and acid rain were identified as possible causes. The most unlikely causes were altered hydrology, altered earth surface runoff, and soil erosion. Soil salinization, soluble inorganic salts, biological species invasion, and pathogens were deferred as delayed causes due to lack of adequate information. The causal analysis approach was applied to identify the primary causes of land degradation and implement accurate protective measures in an impaired land ecosystem.

Partitioning behaviors of zinc in eight coal-fired power plants with different fueled coals and air pollution control devices

Emissions from coal-fired power plants (CFPPs) have a negative impact on the environment and metals are one of the categories of substances that have received considerable attention. In the present study, atmospheric zinc (Zn) emissions from eight CFPPs with different kinds of boilers and air pollution control devices (APCDs) in Guizhou Province, Southwest China, were investigated as well as the partitioning of this metal among boilers and APCDs. During the investigation of a CFPP, samples were taken of input and output materials during the same period. Our results give a Zn content of 32-165 mg kg-1 for feed coal, 52-237 mg kg-1 for bottom ash, 108-725 mg kg-1 for fly ash, 1.2-6.0 mg kg-1 for limestone, 1.6-7.3 mg kg-1 for gypsum, and 1.39-7.06 μg Nm-3 for stack gas. Most of the zinc content in the feed coal goes with the flue gas after combustion and amounts to 94.2-96.1% and 60.5-78.1% for pulverized coal-fired boilers (PC) and circulating fluidized bed boilers (CFB), respectively. Based on input Zn, a larger share (80.8-96.4%) ends up the captured fly ash of PC boilers than the case of CFB boilers (66.1-73.6%). In turn, a minor portion is captured into the flue gas desulfurization gypsum, while we found a maximum of 0.05‰ is emitted into the atmosphere. The atmospheric emission factors (EMFs) of Zn for the eight CFPPs are 7.55-57.22 mg ton-1 coal, 4.17-22.75 μg (kWh)-1, or 0.39-2.36 g TJ-1 using different benchmarks. Overall, the calculated emission factors here are distinctively low with the upgrading of APCDs in recent years. An estimation of 1276 ± 1047 kg year-1 (range: 498-3777 kg year-1) of Zn is emitted into the atmosphere from the CFPPs of Guizhou Province in 2017 by coupling the EMFs obtained from this study and the coal consumption by this category of power plants.

Emergent thallium exposure from uranium mill tailings

Thallium (Tl) pollution caused by the exploitation of uranium (U) mines has long been neglected due to its low crustal abundance. However, Tl may be enriched in minerals of U ore because Tl has both sulfurophile and lithophile properties. Herein, a semi-dynamic leaching experiment combined with statistical analysis, geochemical speciation and multi-characterization provided novel insight into the distinct features and mechanisms of Tl release from uranium mill tailings (UMT). The results showed that particle size effects prevail over the pH on Tl release, and surface dissolution is the pivotal mechanism controlling Tl release based on Fick's diffusion model. The study revealed that long-term leaching and weathering can lead to the increased acid-extractable and oxidizable fractions of Tl in UMT, and that the exposure and dissolution of Tl-containing sulfides would largely enhance the flux of Tl release. The findings indicate that UMT containing (abundant) pyrite should be paid particular attention due to Tl exposure. Besides, critical concern over the potential Tl pollution in universal U mining and hydrometallurgical areas likewise may need to be seriously reconsidered.

Application of biochars in the remediation of chromium contamination: Fabrication, mechanisms, and interfering species

Chromium (Cr) is one of the most toxic pollutants that has accumulated in terrestrial and aqueous systems, posing serious risks towards living beings on a worldwide scale. The immobilization, removal, and detoxification of active Cr from natural environment can be accomplished using multiple advanced materials. Biochar, a carbonaceous pyrolytic product made from biomass waste, is considered as a promising material for the elimination of Cr contamination. The preparation and properties of biochar as well as its remediation process for Cr ions have been well investigated. However, the distinct correlation of the manufacturing, characteristics, and mechanisms involved in the remediation of Cr contamination by various designed biochars is not summarized. Herein, this review provides information about the production, modification, and characteristics of biochars along with their corresponding effects on Cr stabilization. Biochar could be modified via physical, hybrid, chemical, and biological methods. The remediating mechanisms of Cr contamination using biochars involve adsorption, reduction, electron shuttle, and photocatalysis. Moreover, the coexisting ions and organic pollutants change the pattern of the remediating process of biochar in actual Cr contaminated water and soil. Finally, the present limitations and future perspectives are proposed.

Stable isotope fractionation of cadmium in the soil-rice-human continuum

Consumption of rice (Oryza sativa) grain is a major pathway by which humans are exposed to Cd, especially in non-smoking Asian populations. Although the stable isotope signatures of Cd offer a potential tool for tracing its sources, little is known about the isotopic fractionation of Cd across the entire soil-rice-human continuum. Cadmium isotope ratios were determined in field soils, rice grain, and human urine collected from two Cd-contaminated regions in southern China. Additionally, Cd isotopic fractionation in rice plants was investigated using two transgenic plants differing in Cd uptake and accumulation. Analysis of isotope ratios revealed a preferential enrichment of the heavy Cd isotopes from soil to rice grain (δ^114/110Cd_grain-soil = +0.40‰) and from grain to urine (δ^114/110Cd_urine-grain = +0.40‰) in both regions. The first increase was mainly caused by partitioning between the soil solid phase and the soil solution, with heavier Cd preferentially enriching in the soil solution. Within the rice plant, we identified multiple processes that alter the isotope ratio, but the net effect throughout the plant was comparatively small. Cd fractionation in humans is presumably due to the preferential enrichment of heavier Cd isotopes by metal transporters DMT1 and ZIP8 (responsible for the absorption of Cd into body from the foods). These findings provide important insights into the Cd isotopic fractionation through the soil-rice-human continuum and are helpful for tracing the sources of Cd.

Zn phytoextraction and recycling of alfalfa biomass as potential Zn-biofortified feed crop

Zn is an essential micronutrient for living organisms and, in that capacity, it is added to animal feed in intensive livestock production to promote growth and eliminate diseases. Alfalfa (Medicago sativa L.) may have the potential to compensate and substitute the need for chemical Zn additives in feeds as a Zn-biofortified feed crop when grown on Zn-enriched soils. Thus, this possibility was investigated with a greenhouse experiment using three soils with Zn concentrations (mg kg^-1) of 189 (soil A), 265 (soil B) and 1496 (soil C). Ethylenediamine-N,N'-disuccinate acid (EDDS) and Nitrilotriacetic acid (NTA) at different rates (0 as control, 0.5, 2 and 5 mmol kg^-1) were applied as soil additives to enhance the phytoextraction efficiency of alfalfa. The results showed that Zn was highly transferable in alfalfa tissues in the three soils even without additives. EDDS was more effective than NTA in enhancing Zn phytoextraction by alfalfa. The maximum Zn accumulation in the third cutting shoots was obtained with the EDDS concentration of 5 mmol kg^-1 in soil A and of 2 mmol kg^-1 in soil B, with a 462% and 162% increase compared with controls, respectively. However, the higher EDDS concentration resulted in a significant reduction in biomass production. In soil C, all EDDS concentrations resulted in similar Zn accumulations in the third shoot. To improve the phytoextraction efficacy of Zn while minimizing its phytotoxicity on alfalfa, the rate of 2 mmol kg^-1 EDDS proved to be optimal for soil B, and 0.5 mmol kg^-1 EDDS for soils A and C. Findings suggest that phytoextraction of Zn-enriched soil can be combined with Zn biofortification, thus allowing to recycle Zn into biomass that can, to an extent, substitute Zn feed additives. This study provided a primary data set for the combination of Zn-biofortification and Zn-phytoextraction.

Ecological risk assessment of trace metals in soils affected by mine tailings

Environmental impacts caused by mine dam ruptures or inappropriate tailing depositions represent a global concern. An ecological risk assessment was performed in 18 areas affected by the collapse of a major mining dam in southeastern Brazil, in two monitoring periods (2015 and 2018). In these areas, pedogeochemical surveys, and ecological risk levels were determinate. In addition, ecotoxicological assays with Proisotoma minuta (Collembola) were carried out in laboratory. Soil screening values indicated that all contaminated areas were above regional reference values for soil quality for at least one metal (As, Cd, Cr, Cu, Hg, Ni, Pb and Zn), likewise exceeding threshold values for potential ecological and human health risks. In two monitoring years, significant ecotoxicity in the avoidance and reproduction of P. minuta (> 60 % and >80 %, respectively) were evidenced in most soils; and lethal responses in some areas like Córrego Novo, Governador Valadares and Tumiritinga. Results suggest changes in soil physical-chemical properties due to tailing deposition, thus affecting soil dwellers. This study can elucidate the use of appropriate tools to ecological risk assessments, helping to identify the priority areas for defining remediation and monitoring strategies.

Highly efficient removal of thallium in wastewater by MnFe2O4-biochar composite

Thallium (Tl), is a highly toxic trace metal in the natural environment. Emerging Tl pollution in waters has gradually become a global concern. However, limited removal technologies are available for Tl-containing wastewater. Herein, MnFe₂O₄-biochar composite (MFBC) was successfully fabricated via coprecipitation method as a novel and efficient adsorbent for treating Tl(I)-contaminated wastewater. It was found that the MFBC, with a specific surface area of 187.03 m²/g, exhibited high performance across a wide pH range of 4-11, with the superior Tl(I) removal capacity (170.55 mg/g) based on Langmuir model (pH 6.0, a dosage of 1 g/L). The removal mechanisms included physical and chemical adsorption, ion exchange, surface complexation, and oxidation. This investigation revealed that MFBC is a promising and environmentally friendly adsorbent with a low cost, large specific surface area, magnetic properties, and high efficiency for the removal of Tl(I) from wastewater.

Synergistic effect of silicon and selenium on the alleviation of cadmium toxicity in rice plants

Silicon (Si) and selenium (Se), two beneficial elements that alleviate cadmium (Cd) toxicity, are important for agricultural production and human health. However, the effects and related mechanisms of Si-Se interaction on Cd toxicity alleviation are still poorly understood. Herein, a hydroponic experiment was employed to evaluate the effects of Si and Se alone and together, on the growth, Cd content, and biochemical parameters of Cd-treated rice plants. The results revealed that both Si and Se can effectively alleviate Cd toxicity, and a strong synergistic effect of Si and Se was observed. Simultaneous use of Si and Se significantly promoted rice plant growth, decreased malondialdehyde (MDA) content in both the roots and shoots, and reduced Cd translocation factor leading to a significant 73.2 % decrease in shoot Cd content. Additionally, Si-Se interaction increased glutathione (GSH) content, phytochelatin (PC) content and Cd distribution in root cell walls and organelles. Furthermore, the relative expression of OsHMA2 was down-regulated, while those of OsNramp1 and OsMHA3 were up-regulated. The above findings suggest that synergistic effect of Si and Se on Cd toxicity amelioration occurs mainly via regulating gene expression, sequestering Cd in the root cell walls and organelles, and reducing Cd transfer to the shoots.

Novel magnetic loofah sponge biochar enhancing microbial responses for the remediation of polycyclic aromatic hydrocarbons-contaminated sediment

Magnetic activated carbon and magnetic biochar have been widely used for contaminants removal due to the advantages of sequestration and recovery. However, the remediation function and microbial response of conductive magnetic carbonaceous materials for treating organic contaminated sediment are poorly understood. In this study we applied novel three-dimensional mesh magnetic loofah sponge biochar (MagLsBC), made from natural agricultural product, to remediate polycyclic aromatic hydrocarbons (PAHs)-contaminated sediment. Compared to other carbon-based materials, MagLsBC achieved the high reduction of PAHs content and bioavailability in sediment by respectively 31.9 % and 38.1 % after 350 days. Microbial analysis showed that MagLsBC amended sediment had different community diversity, structure and enriched dominant species associated with the aromatic hydrocarbon metabolism. And MagLsBC amendment significantly increased the aromatic compounds degradation function, which was not observed in other treatments, and methanogenesis function. Further analysis revealed that the enhanced microbial responses in MagLsBC amended sediment were related with the high conductivity of MagLsBC. These results give the new insights into the effect of magnetic carbon materials on microbial community and organic pollutants degradation function during the long period amendment, demonstrating MagLsBC as an effective material with the biostimulation potential for the risk control of PAHs contamination.

Nitrogen of EDDS enhanced removal of potentially toxic elements and attenuated their oxidative stress in a phytoextraction process

(S,S)-ethylenediaminedisuccinic acid (EDDS) has a strong capacity to mobilize potentially toxic elements (PTEs) in phytoextraction. It can release NH₄⁺-N via biodegradation, which can enhance N supply to soil thereafter promote plant growth and plant resistance to PTEs. However, the advanced feature of released N in the EDDS-enhanced phytoextraction remains unclear. In the current study, the effects of N supply released from EDDS on ryegrass phytoextraction and plant resistance to PTEs were investigated in detail by a comparison with urea. Our results supported that the addition of both EDDS and urea increased N concentration in soil solution, yet EDDS needed more time to release available N for plant uptake and transported more N from root to shoot. Additionally, EDDS significantly increased the concentration of all targeted PTEs, i.e. Cu, Zn, Cd, and Pb, in the soil solution, which results in higher levels of their occurrence in plant biomass compared with urea. By contrast, the supply of N slightly enhanced the ryegrass uptake of micro-nutrients, i.e. Cu and Zn, yet it caused negligible effects on nonessential elements, i.e. Cd and Pb. The mobilized PTEs by EDDS lead to elevated oxidative stress because higher levels of malondialdehyde and O₂^•- were observed. The supply of N attenuated oxidative stress caused by O₂^•- and H₂O₂, which was associated with enhanced activities of superoxide dismutase and peroxidase. Our results advanced the understanding of the exogenous N supply and metal resistance mechanisms in the EDDS-enhanced phytoextraction. This study also highlighted that EDDS can serve as a N source to ease N-deficient problems in PTEs-contaminated soils.

Cd Adsorption by Iron-Organic Associations: Implications for Cd Mobility and Fate in Natural and Contaminated Environments

The mobility and fate of Cd in soil are mainly controlled by active substances such as iron minerals and organic matter. Iron minerals and organic matter often coexist in the form of iron-organic associations (IOA), which have large specific surface areas and many functional groups, potentially affecting Cd adsorption. However, little is known about Cd adsorption by IOA. This study investigated Cd adsorption by the synthetic IOA under different conditions. The results indicate Cd adsorption increased with the increasing amount of IOA, while the adsorption efficiency decreased gradually. pH significantly affects Cd adsorption, because the Cd speciation and the surface charge of IOA changed under different pH conditions. Under alkaline condition, part of Cd would form hydroxide precipitate, facilitating Cd adsorption by IOA. The composition of organic matter in IOA didn't significantly affect Cd adsorption.

Emerging risks of toxic metal(loid)s in soil-vegetables influenced by steel-making activities and isotopic source apportionment

Industrial activities tend to deteriorate adjacent agricultural lands due to accumulation of potentially toxic elements in soils and crops. However, better understanding of their distinctive source partitions and transfer process remains insufficient in steel-making area. The paper focuses on the pollution levels, health risks, and provenance identification of Tl, As, Pb, Cu, Ni, Co, Sb, Cd, Zn, Be, Cr, Fe, Mn, Mo, Sn, and V in common vegetables from different farmlands near a steel-making plant. The results showed that the Tl, As, Pb, Cd, Cr, Cu and Mn were of high-level contamination in soils and generally above the maximum permissible level (MPL). Calculation using hazard quotients (HQ) exhibited that consumption of the studied vegetables may entail significant health risks to residents, especially for children, resulting from the elevated contents of Tl, As and associated toxic elements. Calculation by binary mixing model using Pb isotopic compositions suggested that steel-making activities contributed to 35-80% of the contamination of Pb and As in vegetables. It is necessary to adopt appropriate remediation measures to mitigate the farmland contamination and ensure the food safety of the agricultural products.

Mitigation of arsenic accumulation in arugula (Eruca sativa Mill.) using Fe/Al/Zn impregnated biochar composites

Arsenic (As) contamination of aquatic and soil environments is a global concern, highlighting the importance of As removal via high-efficiency and low-cost removal technologies. In the present study, novel trimetallic biochar was developed through pyrolyzing corn straw impregnated with inexpensive metal Fe/Al/Zn (hydr)oxides. The results of SEM, FTIR, and XRD verified the formation of metal oxyhydroxides on the surface of the modified biochars, and the modification increased the specific surface area (SSA), total pore volume (TPV), and surface charge of the Fe/Al/Zn (hydr)oxides modified biochar (FAZ-CB). Compared with the original biochar, higher sorption rates and capacities was observed for the FAZ-CB. The maximum As (V) adsorption capacities of FAZ-CB reached 82.9 mg g^-1. A pot experiment showed that application of FAZ-CB decreased bioavailable As fractions in the red soil significantly reduced the uptake of As by arugula in edible part and root (42.6 and 56.8%, respectively). The present study demonstrated the superiority of FAZ-CB in the As(V) immobilization in red soil, suggesting that it is a promising candidate for practical application for As immobilization. Therefore, FAZ-CB can be used as a promising functionalized biochar to remediate As contaminated red soil.

Relationships between soil properties and the accumulation of heavy metals in different Brassica campestris L. growth stages in a Karst mountainous area

The speciation and activity of heavy metals in farmland were changed with the different soil properties and flooded environment, especially in the complex and rainy environment in soil of Guizhou Province. The objective of this study was to explore the concentrations of a variety of heavy metal activity and the speciation of those heavy metals in rhizosphere soil at different growth stages of Brassica campestris L. in a Karst mountainous area. Tessier's five-stage sequential extraction procedure, the potential ecological risk index, a Bayesian network, accumulation factors, translocation factors and a laboratory simulation experiment were applied in this study. The results showed that (1) no heavy metal concentrations (except the Cd concentration) exceeded the limits of the soil environmental quality risk control standards for soil contamination of agricultural land in China (GB15618-2018). (2) The orders of the accumulation factor and translocation factor values were Zn > Cd > Cu > Pb > Cr and Cd > Cu > Zn > Pb > Cr, respectively. The order of the heavy metal contents of different tissues during the whole growth period was roots > leaves > stems. (3) The indoor simulation test exhibited that the dry-wet alternation and flooding can reduce Cd activity in soil. (4) Redox potential (Eh), rather than pH or organic matter, was the main factor impacting the total content and chemical speciation of heavy metals in the soil, based on a dynamic Bayesian network. Based on the results, we suggest that the activity of heavy metals should be improved by using dry-wet alternation, whereas the proportions of ion-exchangeable forms of heavy metals are relatively low in the study area (except for Cd). Several measures may be taken to enhance soil acidity and reduce the Cd activity during Brassica campestris L. cultivation.

Health risks of metal(loid)s in maize (Zea mays L.) in an artisanal zinc smelting zone and source fingerprinting by lead isotope

Metal(loid) contamination caused by industrial activities in agricultural soils has become a universal environmental and food safety concern. This study revealed the contamination, pathway, and source contribution of metal(loid)s such as lead (Pb), zinc (Zn) and cadmium (Cd) in maize and soils in different residential areas impacted by long-term historical artisanal zinc smelting activities from Southwest China. Results revealed that the soils were contaminated heavily by metals like Pb, Zn and Cd, with contents of 40-14,280, 150-47,020 and 1.28-61.7 mg/kg, respectively. Hazard quotients of food uptake for Pb, Cd and Cr in maize grains were extremely high for residents, in particular for the children. To trace the sources of metal health risk, lead isotope fingerprinting and binary mixing modeling were applied. It indicated that the anthropogenic activities contributed over 80% to the Pb contamination in maize grains. The findings highlighted warning levels of health risks to the residents in consuming maize grains in the historical artisanal PbZn smelting area. Therefore, an effective strategy including pollution source control and remediation measures must be taken to improve the soil quality and guarantee food safety around the historical smelting areas likewise.

Optimization of Growth Conditions of Acinetobacter sp. Cr1 for Removal of Heavy Metal Cr Using Central Composite Design

Growth conditions can significantly affect the removal efficiency of heavy metals by microorganisms. The goal of this study was enhancing the removal efficiency of Cr(VI) and improving the application of Acinetobacter sp. Cr1 (GenBank accession number of 16S rDNA sequence, MN900681). This study focused on pH, Cr(VI) concentration and culture time, which were the major influence factors for removal efficiency of Cr(VI). A central composite design was employed to optimize the removal efficiency by optimizing three variables. The optimum growth conditions were as: pH of 9.52, Cr(VI) concentration of 128.55 mg l^-1, culture time of 43.30 h, and the predicted and actual maxima were 65.13% and 67.26%, respectively. Therefore, it is suggested that the strain Acinetobacter sp. Cr1 had a promising potential to be used for bioremediation of Cr(VI).

Quantitative isotopic fingerprinting of thallium associated with potentially toxic elements (PTEs) in fluvial sediment cores with multiple anthropogenic sources

Thallium (Tl) is a dispersed trace metal showing remarkable toxicity. Various anthropogenic activities may generate Tl contamination in river sediments, posing tremendous risks to aquatic life and human health. This paper aimed to provide insight into the vertical distribution, risk assessment and source tracing of Tl and other potentially toxic elements (PTEs) (lead, cadmium, zinc and copper) in three representative sediment cores from a riverine catchment impacted by multiple anthropogenic activities (such as steel-making and Pb-Zn smelting). The results showed high accumulations of Tl combined with associated PTEs in the depth profiles. Calculations according to three risk assessment methods by enrichment factor (EF), geoaccumulation index (I_geo) and the potential ecological risk index (PERI) all indicated a significant contamination by Tl in all the sediments. Furthermore, lead isotopes were analyzed to fingerprint the contamination sources and to calculate their quantitative contributions to the sediments using the IsoSource software. The results indicated that a steel-making plant was the most important contamination source (∼56%), followed by a Pb-Zn smelter (∼20%). The natural parental bedrock was found to contribute ∼24%. The findings highlight the importance of including multiple anthropogenic sources for quantitative fingerprinting of Tl and related metals by the lead isotopic approach in complicated environmental systems.

Review of Potentially Toxic Rare Earth Elements, Thallium and Tellurium in Plant-based Foods

In the last decades, there is an increasing inclusion of various trace metals and metalloids such as thallium, tellurium and rare earth elements (REEs; lanthanides, scandium, and yttrium) in the composition and production of alloys, in agricultural and medicinal applications, as well as in the manufacturing of hi-tech products. All these activities have led to an accumulation of the aforementioned elements both in soil and water bodies and consequently in the food chain, through discharges from mining and mineral processing, liquid industrial waste or disposal of urban and industrial products. It has been demonstrated that chronic exposure to some of these elements, even at low doses, might lead to a wide range of adverse health effects, even from the early stages of life, such as neurotoxicity, neurodevelopmental toxicity and hepatic alterations. Particularly in children, there have been studies suggesting that some of these elements might negatively affect the children's spatial learning and memory ability indirectly. Such effects are triggered by processes like the production of reactive oxygen species (ROS), lipid peroxidation and modulation of antioxidant activities. Nevertheless, the limited data from toxicological studies and their so-far naturally low occurrence levels in the environment acted as a deterrent in measuring their concentrations during routine analyses of metals in foodstuff. Thus, it is important to collect information on their occurrence data both in adults and in children's daily diet. This review sumrises the current knowledge on the concentration of these elements, in plant-based food products to identify whether a potential health risk occurs. As side projects, this Fellowship provided hands-on training on the evaluation of new biocides application and participation in the given advice to the Danish Food and Veterinary Administration, Danish Environmental Protection Agency, the Danish Medical Agency and the European Chemicals Agency.

Facile modification of graphene oxide and its application for the aqueous uranyl ion sequestration: Insights on the mechanism

Graphene oxide (GO) has been proved with favorable affinity to U(VI), while some drawbacks such as poor dispersity and low adsorption performance limit its application. Herein, cetyltrimethylammonium bromide (CTAB) modified graphene oxide (MGO) composites were successfully fabricated, characterized and compared with graphene oxide (GO) in the sequestration of U(VI) in aqueous solutions. The results showed that maximum adsorption rate of MGO (99.21%) was obviously higher than that of GO (66.51%) under the same initial condition. Simultaneous introduction of C-H and NO coupled with the enhanced dispersity of GO after modification were mainly responsible for the updated performance verified with multiple characterization techniques. Based on the results of kinetics and isotherms investigations, the experimental data were best described by Pseudo-first-order kinetic model and Redlich-Peterson isotherm model. The results of ΔH, ΔS and ΔG show that adsorptive behaviors of uranyl ion on MGO are endothermic and spontaneous. The study provides a feasible alternative to the chemical modification of GO and enhancing the performance towards uranyl ion removal from solution.

Microbial insights into the biogeochemical features of thallium occurrence: A case study from polluted river sediments

Thallium (Tl) is a trace element with extreme toxicity. Widespread Tl pollution in riverine systems, mainly due to escalating mining and smelting activities of Tl-bearing sulfide minerals, has attracted increasing attention. Insights into the function of the microbial communities with advanced characterization tools are critical for understanding the biogeochemical cycle of Tl. Herein, microbial communities and their adaptive evolution strategies in river sediments from a representative Tl-bearing pyrite mine area in southern China were profiled via 16S rRNA gene sequence analysis and shotgun metagenomic analysis. In total, 64 phyla and 778 genera of microorganisms were observed in the studied sediments. The results showed that pH, Tl, Pb, Zn and total organic carbon (TOC) had a significant influence on microbial community structure. Some important reductive microorganisms (such as Erysipelothrix, Geobacter, desulfatiferula, desulfatihabadium and fusibacter) were involved in the biogeochemical cycle of Tl. The ruv, rec, ars and other resistance genes enhanced the tolerance of microorganisms to Tl. The study suggested that relevant C, N and S cycle genes were the main metabolic paths of microorganisms surviving in the high Tl-polluted environment. The findings were critical for establishment, operation and regulation in the microbial treatment of Tl containing or related wastewater.

Arsenic adsorption on layered double hydroxides biochars and their amended red and calcareous soils

Highly efficient amendments for controlling arsenic (As) pollution in soils are imperative to improve soil quality and enhance food production. In the present study, corn stalk biochar was functionalized with three kinds of layered double hydroxides (i.e., Mg-Al-LDH, Zn-Al-LDH, and Cu-Al-LDH) using a simple co-precipitation method. The synthesized LDH biochar composites (LDH@BCs) exhibited better adsorption capacity and affinity for As due to their enhanced anion exchange capacity and reactive surface hydroxyl groups identified by XRD, FTIR and XPS. Arsenic (As) bioavailability and leaching characteristics of spiked red and calcareous soils (150 mg As/kg) amended with or without LDH@BCs were investigated using soil column. The Zn-Al-LDH@BC decreased the As (V) migration and increased pak choi (Brassica chinensis L.) growth in both red and calcareous soil. These results indicated that LDH modified biochar is an effective way to overcome the shortfalls of unmodified biochar in mitigating the As contamination and provide a basis for further exploring the potential of biochar-based soil amendments for environmental remediation.

Persistent thallium contamination in river sediments, source apportionment and environmental implications

The adverse impacts of detrimental thallium (Tl) contamination are of increasing concerns to sustainable development. Herein, the contents, distributions and sources of Tl and potential toxic elements (PTEs) (Pb, As, Cr, Cu, Ni, Co, Sb, Cd and U) were investigated in sediments collected in Gaofeng River, which has been contaminated by long-term mining activities, located in Yunfu City, Southern China. Results indicated that excessive Tl levels were found in sediments (1.80-16.70 mg/kg). Sequential extraction procedure indicated that despite a large amount of Tl entrapped in residual fraction, a significant level of Tl (0.28-2.34 mg/kg) still exhibited in geochemically labile fractions, which was easy for Tl mobilization and availability. Pb isotope tracing method further confirmed that the pyrite exploitations may be the prime contaminated contributor (47-76%) to these sediments. These findings highlight that it is essential to establish more effective measures for Tl contamination control and call for engineered remediation countermeasures towards polluted river sediments.

Isolation and Characterization of Pseudomonas sp. Cr13 and Its Application in Removal of Heavy Metal Chromium

The purpose of this study was to elaborate the characteristics of Pseudomonas sp. Cr13, including physiological and biochemical characteristics, optimization of growth conditions, minimum inhibitory concentration of Cr⁶⁺ and resistance to other heavy metals, removal efficiency of Cr⁶⁺, and antibiotics sensitivity. A strain Pseudomonas sp. Cr13 was screened from mine-contaminated soils, which could tolerate high concentration of Cr⁶⁺ (up to 250 mg l^-1) and Cd²⁺ (50 mg l^-1). The optimum pH, NaCl concentration, and temperature for growth were 6, 10% NaCl, and 30 °C, respectively. The removal efficiency of Cr⁶⁺ by strain Pseudomonas sp. Cr13 was studied. The removal efficiency of Cr⁶⁺ decreased with the increased concentration of Cr⁶⁺. Under the optimal conditions, the maximum of the removal rate can reach up to 94.26% in contaminated soils. In addition, antibiotics sensitivity of this strain was investigated. It was found that this strain was sensitive to nine types of antibiotics, which would lay a good foundation for the choice of selective marker in genetic engineering modification of this strain. The results in this article would lay a good foundation for the bioremediation of heavy metals pollution in the future. Pseudomonas sp. Cr13 can tolerate high concentration of Cr⁶⁺ and partially remove Cr⁶⁺, which make Cr13 an attractive option for the bioremediation of heavy metal chromium (Cr). Our findings suggest that Pseudomonas sp. Cr13 is a potential bacterium with the ability of bioremediation of heavy metal Cr.

Health Risk Assessment in Agricultural Soil Potentially Contaminated by Geogenic Thallium: Influence of Plant Species on Metal Mobility in Soil-Plant System

In agricultural soils, thallium (Tl) of geogenic origin may represent a potential risk for human health, mainly via ingestion of food crops. In this work, a pot experiment was carried out to evaluate (1) the bioavailability of Tl and other potentially toxic elements (PTEs) in an agricultural soil with naturally occurring Tl; (2) the uptake and accumulation of PTEs in Lactuca sativa L. var. acephala, Diplotaxis tenuifolia L. DC and Silene latifolia Poir; (3) the health risks arising from plant and soil ingestion by different subpopulations and dermal contact of soil by farmers. In soil, only Tl and Pb pseudototal contents were above Italian screening values. Nevertheless, the promptly bioavailable contents of all PTEs were always below internationally recognized trigger values. Plants affected PTE bioavailability in soil by their rhizodepositions and accumulated PTEs in their shoots. Acceptable risks (hazard index < 1) arose from dietary intake of both L. sativa L., D. tenuifolia L. and dermal contact of soil by farmers. Significant health risks can derive from the intake of S. latifolia Poir. (accumulating high Tl concentrations), in particular by children (HI = 74). In conclusion, an adequate management and crop selection are needed to profitably exploit soils with geogenic Tl for agricultural purposes.

Legacy of multiple heavy metal(loid)s contamination and ecological risks in farmland soils from a historical artisanal zinc smelting area

Farmland soil contamination of heavy metal(loid)s (HM) derived from smelting activities is a global concern, owing to its potential threat for human health through food chain. This study aims to evaluate total contents and bioavailability of HMs (Pb, Zn, Tl, Cd, Cu, As, Ag, Co, Cr and Ni) in farmland soils distributed over ten different villages from a former artisanal zinc smelting area in the northwest Guizhou province, China. The results showed that most of the studied soils still exhibited exceptionally high enrichment of Pb, Zn, Cd and As. High levels of bioavailable HMs were also observed in some samples, which may enter the human food chain through agricultural activities. Further analyses by Scanning Transmission Electron Microscopy - Energy Dispersive Spectroscopy (STEM-EDS), X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD) showed the presence of Zn smelting by-products such as Fe oxides, ZnO and PbSO₄ even in nanoscale particles retained by the soils. Elemental mapping by EDS confirmed a close association of the studied HMs with the smelting waste particles. All these results signify that high levels of HM-contamination from historical artisanal zinc smelting activities still persist and threaten the health of local residents, despite the fact that the major industrial-derived-contamination period ended >15 years ago. Our findings highlight pivotal concerns in similar artisanal-smelting-affected farmland soils of suspected contamination, due to less-expected toxic elements such as Tl, which may cause high ecological health risks.

Quantitative source apportionment of heavy metal(loid)s in the agricultural soils of an industrializing region and associated model uncertainty

Heavy metal(loid)s are natural constituents of the Earth's crust, and apportionment of their sources in surface soils is a challenging task. This study evaluated the application of positive matrix factorization (PMF) model, assisted with regression modeling and geospatial mapping, in the quantitative source apportionment of heavy metal(loid)s in the agricultural soils of Handan, a region covering >12,000 km². Obvious enrichment of As, Cd, Cu, Pb, and Zn was found in the surface soils, with Cd alone accounted for 73 % of the overall potential ecological risk. PMF model revealed that Cd (56.9 %) and Pb (47.8 %) in the region's agricultural soils were predominantly contributed by industrial sources, Fe (71.8 %), Cr (60.0 %), V (52.9 %), Cu (50.7 %), Ni (42.2 %), and Mn (41.4 %) were primarily of lithogenic origin, while Co (54.1 %), As (42.9 %), and Zn (40.0 %) mainly came from the mixed sources of natural background, agricultural sources, and vehicle emissions. Uncertainty analysis showed that the contributions of pollution sources to the soil heavy metal(loid)s estimated by PMF model had considerable variations. While quantitative source apportionment of heavy metal(loid)s in soils could be achieved with PMF based on their spatial distributions, combination with emission inventory and reactive transport are probably necessary to obtain more accurate results.

Effects and mechanisms of mineral amendment on thallium mobility in highly contaminated soils

Thallium (Tl) is an extremely toxic element, whose toxicity is even higher than mercury, arsenic, and cadmium. It is of great significance to hinder the migration and transfer of Tl from soils to the plants. A synthetic mineral amendment (SMA), mainly composed of different silicates, was evaluated for its effects on the transformation and retention of Tl in two typical highly Tl-contaminated soils from Southwest China. The results indicated that the addition of mineral amendment increased the soil of the pH by 0.46-2.13 units and distinctly reduced the content of active thallium in the soils. The extent of Tl reduction was related to the morphological characteristics of the original soil In particular, the application of the mineral amendment transformed 25.8-52.5% of the active Tl fractions in the soils to the residual fraction at 60 d. Adding mineral amendment to the soils can provide conditions to facilitate Tl to enter the silicate crystal lattice. The results of XPS evidenced that the proportion of Tl(I) in the soil was greatly reduced after adding the mineral amendment.

Thallium and co-genetic trace elements in hydrothermal Fe-Mn deposits of Central Spain

Thallium (Tl) is a hazardous trace metal that can harm human and environmental health. Tl pollution can result from the mining and smelting of Tl-bearing minerals, but also the natural weathering of Tl-bearing sulfide minerals may induce Tl release to the environment. In this study, hydrothermal deposits hosted in dolostone rocks sited along fossil thermal springs in the Lodares region (Soria province, central Spain) were studied. In this hydrothermal mineralization zone, Tl association with primary minerals, identified Tl-bearing secondary products resulting from natural weathering of primary minerals, as well as the dispersion from its natural source along a seasonal small streambed were explored. Samples were analyzed by chemical, microscopic and spectroscopic techniques and epithermal pyrite, sphalerite, galena and barite and secondary gypsum, jarosite, scorodite, anglesite, goethite, epsomite and elemental sulfur produced by both inorganic and bacterial processes were found. The highest Tl contents were found in hydrothermal pyrite (188 mg kg^-1), jarosite (142 mg kg^-1), Mn-oxides (27 mg kg^-1) or kerogen (13 mg kg^-1). Feldspar was identified by electron probe microanalysis as potential host phase of Tl. XANES results confirmed the association of Tl(I) with metal sulfides in pyrite-rich samples and highlighted the role of jarosite-like minerals for Tl(I) sequestration upon pyrite oxidation, even in carbonate-rich samples at near-neutral pH. In addition to micaceous minerals, jarosite-group minerals and K-feldspars may contribute to the natural attenuation of Tl in soils and sediments.

Repeated measures of prenatal thallium exposure and placental inflammatory cytokine mRNA expression: The Ma'anshan birth cohort (MABC) study

Thallium (Tl), a ubiquitous environmental toxicant, can cross the placental barrier during pregnancy. However, the effects of prenatal Tl exposure on placental function are currently unclear. Based on the Ma'anshan Birth Cohort study, we examined whether long-term prenatal Tl exposure was associated with placental inflammation. Tl concentrations were quantified in serum samples (n = 7050) from 2515 pregnancy during each trimester, placental inflammatory cytokine mRNA expression was assessed in 2519 placenta tissues. Geometric mean values of serum Tl concentrations were 63.57, 63.63 and 48.71 ng/L for the first, second and third trimesters, respectively. After adjustment for potential confounders, serum Tl concentration was positively associated with CD68 (β: 0.30; 95% CI: 0.05, 0.56) in the first trimester and TNF-α (β: 0.12; 95% CI: 0.01, 0.23), IL-6 (β: 0.15; 95% CI: 0.05, 0.25) and CD68 (β: 0.25; 95% CI: 0.10, 0.39) in the third trimester, however was negatively associated with IL-4 (β: -0.21; 95% CI: -0.41, -0.01) and CD206 (β: -0.23; 95% CI: -0.45, -0.02) in the first trimester. Repeated measures analysis showed that TNF-α, IL-6 and CD68 increased by 0.11 (95% CI: 0.01, 0.21), 0.12 (0.15, 95% CI: 0.05, 0.25), 0.22 (95% CI: 0.10, 0.39), respectively, with each 1ln-transformed Tl increase in total samples. Gender-specific analyses revealed that these associations were largely driven by male offspring. In addition, immunohistochemistry revealed that nuclear NF-κB p65 expression increased in placenta tissue. The results of this prospective cohort study provide longitudinal evidence that prenatal Tl exposure induces a placental inflammatory response in the Chinese population.

Hyperaccumulation and transport mechanism of thallium and arsenic in brake ferns (Pteris vittata L.): A case study from mining area

Both thallium (Tl) and arsenic (As) bear severe toxicity. Brake fern (Pteris vittata L.) is well-known for its hyperaccumulation capacity of As, yet its role on Tl accumulation remains unknown. Herein, brake ferns growing near an As tailing site in Yunnan, Southwestern China are for the first time discovered as a co-hyperaccumulator of both Tl and As. The results showed that the brake ferns extracted both As and Tl efficiently from the soils into the fronds. The studied ferns growing on Tl and As co-polluted soils were found to accumulate extremely high levels of both As (7215-11110 mg/kg) and Tl (6.47-111 mg/kg). Conspicuously high bio-accumulation factor (BCF) was observed for As (7.8) and even higher for Tl (28.4) among these co-hyperaccumulators, wherein the contents of As and Tl in contaminated soils were 1240 ± 12 and 3.91 ± 0.01 mg/kg, respectively. The applied advanced characterization techniques (e.g. transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS)) indicated a preferential uptake of Tl(I) while simultaneous accumulation of As (III) and As(V) from the Tl(I)/Tl(III)-As (III)/As(V) co-existent rhizospheric soils. The findings benefit the phytoremediation practice and pose implications for managing and restoring Tl-As co-contaminated soils in other countries.

Temporal sedimentary record of thallium pollution in an urban lake: An emerging thallium pollution source from copper metallurgy

Thallium (Tl) is an extremely toxic metal with high risk. Sediment samples from a well dated sediment core retrieved from a heavily polluted urban lake were measured to assess the magnitude of Tl pollution and reveal its transfer mechanisms within the lake. The results show that the lake has experienced serious Tl pollution during the past 60 years, owing to a large influx of Tl-bearing wastes mostly from a neighboring copper (Cu) smelter. The Tl contents in the sediment core at different depths generally correlated positively with the production scale of Cu smelting activities in the past. Further mineralogical analysis on the electrostatic precipitator dust from the Cu smelter and highly-polluted samples from the sediment core by electronic microscopy and X-ray diffraction suggested that Tl was primarily bound to quartz and aluminosilicates. Large quantities of Tl were also observed in diatom frustules collected from the sediments, suggesting a potentially significant role of biogenic silicates in the uptake and transfer of Tl in the sediment-water system. The findings indicate a new and emerging pollution source of thallium arising from copper metallurgy activities. The results also highlight the necessity of strengthened monitoring and regulations towards Tl pollution in environmental systems impacted by Cu smelting activities in China and other nations.

Thallium isotopic fractionation in industrial process of pyrite smelting and environmental implications

Thallium (Tl) is typical rare element with severe toxicity comparable to Hg and Pb. To track Tl pollution, isotopic fractionation of Tl was evaluated during pyrite smelting for sulfuric acid production. Large variations in Tl isotope compositions were observed among the pyrite ore (PO) and its four different smelting wastes. The starting raw PO had an ε²⁰⁵Tl value of +1.28. The fluidized-bed furnace slag generated by high-temperature smelting had the heaviest ε²⁰⁵Tl (+16.24) in the system. Meanwhile, the boiler fly ash (ε²⁰⁵Tl = +8.34), cyclone fly ash (ε²⁰⁵Tl = +2.17), and electrostatic precipitation fly ash (ε²⁰⁵Tl = -1.10), with decreasing grain sizes during the treatment processes, were characterized by elevated levels of Tl contents and substantial enrichment in the light Tl isotopes relative to the furnace slag. Further calculation and high-resolution transmission electron microscopy indicated that Tl isotope fractionation could be governed by both Rayleigh-type fractionation and adsorption of volatilized Tl by particles of various grain sizes. According to the substantial differences in the PO from its smelting wastes and the measurement precision of isotopic fractionation, it is suggested that Tl isotopes can serve as a new tool for tracing pollution of Tl.

Thallium contamination, health risk assessment and source apportionment in common vegetables

As an element with well-known toxicity, excessive thallium (Tl) in farmland soils, may threaten food security and induce extreme risks to human health. Identification of key contamination sources is prerequisite for remediation technologies. This study aims to examine the contamination level, health risks and source apportionment of Tl in common vegetables from typical farmlands distributed over a densely populated residential area in a pyrite mine city, which has been exploiting Tl-bearing pyrite minerals over 50 years. Results showed excessive Tl levels were exhibited in most of the vegetables (0.16-20.33 mg/kg) and alarming health risks may induce from the vegetables via the food chain. Source apportionment of Tl contamination in vegetables was then evaluated by using Pb isotope fingerprinting technique. Both vegetables and soils were characterized with overall low ²⁰⁶Pb/²⁰⁷Pb. This indicated that a significant contribution may be ascribed to the anthropogenic activities involving pyrite deposit exploitation, whose raw material and salgs were featured with lower ²⁰⁶Pb/²⁰⁷Pb. Further calculation by binary mixing model suggested that pyrite mining and smelting activities contributed 54-88% to the thallium contamination in vegetables. The results highlighted that Pb isotope tracing is a suitable technique for source apportionment of Tl contamination in vegetables and prime contamination from pyrite mining/smelting activities urges authorities to initiate proper practices of remediation.

Physicochemical features, metal availability and enzyme activity in heavy metal-polluted soil remediated by biochar and compost

Biochar and compost have been widely used for pollution remediation of heavy metals in soil. However, little research was conducted to explore the efficiency of biochar, compost and their combination to reduce heavy metals availability, and the effects of their additive on soil biological properties are often neglected. Therefore, this study investigated the effects of biochar, compost and their combination on availability of heavy metals, physicochemical features and enzyme activities in soil. Results showed that adding amendments to polluted soil significantly altered soil properties. Compared to the separate addition of biochar or compost, their combined application was more effective to improve soil pH, organic matter (OM), organic carbon (TOC) and available potassium (AK). All amendments significantly decreased the availability of Cd and Zn, but slightly activated As and Cu. In addition, soil enzyme activities were activated by compost and inhibited by biochar, but exhibited highly variable responses to their combinations. Pearson correlation analysis indicated that electrical conductivity (EC) and AK were the most important environmental factors affecting metal availability and soil enzyme activities including dehydrogenase, catalase, β-glucosidase, urease, acid and alkaline phosphatase, arylsulfatase except for protease and invertase. Availability of As, Cu, Cd and Zn affected dehydrogenase, catalase and urease activities. These results indicated that biochar, compost and their combination have significant effects on physicochemical features, metals availability and enzyme activities in heavy metal-polluted soil.

Mechanism of Cr(VI) removal by magnetic greigite/biochar composites

This study synthesized magnetic greigite/biochar composites (MGBs) by a solvothermal method and tested their ability to remove Cr(VI) from heavy metal-polluted wastewater. X-ray diffraction (XRD), Fourier transformed infrared spectrometry (FT-IR) and scanning electron microscopy (SEM) revealed that magnetic greigite (Fe₃S₄) flakes were aggregated and anchored to the biochar surface, resulting in more active sites than pristine biochar. Maximum Cr removal efficiency and capacity of MGB-30 (greigite/biochar = 30%) at an initial Cr(VI) concentration of 20 mg/L were 93% and 23.25 mg/g, respectively. A pseudo-first-order kinetic model was determined for the Cr(VI) removal process and the Cr(VI) removal rate constants were highly dependent on the mass ratios of Fe₃S₄ loaded on biochar, initial MGB and Cr(VI) concentrations and solution pH. X-ray photoelectron spectroscopy (XPS) and flame atomic absorption spectrometric (FAAS) analysis demonstrated that Cr(VI) was preferentially adsorbed on MGBs and subsequently reduced to Cr(III) by MGBs. Electron paramagnetic resonance (EPR) spectroscopy and iron redox transformations revealed that the Cr(VI) removal enhancement was attributed to efficient surface Fe(III)/Fe(II) cycling via electron transfer with the persistent free radicals (PFRs) of biochar. These novel findings provide new insights into the Fe(III)/Fe(II) cycle induced by biochar and the prospects of using magnetic greigite/biochar composites for remediation of Cr(VI)-rich wastewaters.

Geochemical fractionation of thallium in contaminated soils near a large-scale Hg-Tl mineralised area

Enriched levels of thallium (Tl) in the environment are not only derived from anthropogenic sources but also have potential natural origins owing to Tl-rich sulphide mineralization. However, little is known regarding the geochemical fractionations of Tl in contaminated soils from geogenic sources. This study aims to reveal the Tl geochemical fractionations in different types of soils from a large-scale independent Tl mine in southwestern China, via a modified Institute for Reference Materials and Measurement (IRMM) sequential extraction (four-step) scheme. The results revealed that a large percentage of Tl was related to the labile portions (including reducible, weak-acid-exchangeable, and oxidizable fraction) of the soils (68.8-367 mg kg^-1). Further analyses by Scanning Transmission Electron Microscopy-Energy Dispersive X-ray Spectrometer (STEM-EDS) found that Tl mainly existed in the Fe-containing minerals (such as jarosite and hematite) with fine particles (∼1 μm). These results highlight that, apart from the anthropogenically induced Tl pollution, the naturally occurring Tl contamination in soils may also pose significant risks to human health and ecological safety. Owing to the relatively high mobility and bioavailability of Tl in the labile fractions, it is important to understand geochemical fractionations of this element for alleviating Tl pollution and effective management of naturally occurring Tl contaminated soils.

Effects of magnesium ferrite biochar on the cadmium passivation in acidic soil and bioavailability for packoi (Brassica chinensis L.)

Biochar (BC) and magnesium ferrite (MF) have been used in effective adsorption of cadmium (Cd) in aqueous environment, whereas little is known about the effect of their composite on Cd adsorption and Cd-contaminated soil remediation. In this study, biochar (BC), magnesium ferrite (MF) and biochar assembled with magnesium ferrite (MB) were prepared for Cd adsorption and then applied in soils (1-2% w/w) to investigate their effects on Cd passivation by performing leaching experiments and early stage seeding growth test for packoi (Brassica chinensis L.). Compared with the BC and MF, the MB showed greater adsorption property for Cd at aqueous solution (31.3 mg/g) and amended soils (1.85 mg/g at 2% applied rate) based on the isotherms studies. Besides, the MB performed the better passivation ability in reduction of the bioavailable Cd and seeding growth experiment. Solid state analysis of the materials before and after leaching indicated that the passivation mechanism may be dominated by ion exchange and surface complexation. Principal component analysis revealed that the soil pH and adsorption capacity had the strong correlation with the contents of bioavailable-Cd and seedling growth. These results indicated that MB could be used as an efficient amendment in Cd contaminated soil for reducing bioavailable Cd concentrations and improving plant growth.

High contamination risks of thallium and associated metal(loid)s in fluvial sediments from a steel-making area and implications for environmental management

Thallium (Tl) is an uncommon toxic element, with an even greater toxicity than that of As, Hg and Cd. Steel-making industry has been identified as an emerging new significant source of Tl contamination in China. This paper presents a pilot investigation of the contamination and geochemical transfer of Tl and associated metal(loid)s in river sediments affected by long-term waste discharge from the steel-making industry. The results uncovered an overall Tl contamination (1.96 ± 0.42 mg/kg) across a sediment profile of approximately 1.5 m in length, even 10 km downstream the steel plant. Highly elevated contents of Pb, Cu, Cd, Zn and Sb were found in the fluvial sediments, displaying strong positive correlations with Tl contents. Elevated levels of geochemically mobile Tl as well as Cd, Zn, Cu and Pb occurred in the fluvial sediments, signifying anthropogenic imprints from steel production activities at high temperature. Levels of contamination and ecological risk were calculated to be moderate to considerable for Tl, Cu, Zn and high to very high for Cd, Pb, Sb. The results highlight that there is a great challenge in view of potentially considerable Tl pollution due to continuous massive steel production in many other parts of China. It is high time to initiate process-based management of Tl contamination control for the ambient aquifer system in the steel-making area.

Prenatal exposure to thallium is associated with decreased mitochondrial DNA copy number in newborns: Evidence from a birth cohort study

BACKGROUND

Prenatal exposure to thallium is related to adverse birth outcomes. However, little is known about the effects of prenatal exposure to thallium on the mitochondrial DNA copy number (mtDNAcn) in newborns; such knowledge might reveal a potential mechanism linking maternal thallium exposure and adverse birth outcomes.

OBJECTIVE

To investigate the trimester-specific associations of maternal thallium exposure with cord blood leukocyte mtDNAcn.

METHODS

A total of 746 pregnant women with trimester-specific urinary samples and cord blood samples were recruited from Wuhan Children Hospital between November 2013 and March 2015 in Wuhan City, China. The concentration of thallium in maternal urine was quantified using inductively coupled plasma mass spectrometry (ICP-MS). Cord blood leukocyte mtDNAcn was measured by real-time quantitative polymerase chain reaction (qPCR). Trimester-specific associations of specific gravity (SG)-adjusted urinary thallium concentrations with mtDNAcn were estimated using a multiple informant model.

RESULTS

The geometric mean value of maternal urinary thallium was 0.34 μg/L, 0.36 μg/L, and 0.34 μg/L for the first, second, and third trimesters, respectively. Prenatal exposure to thallium during the first trimester, rather than during the second or the third trimester, was identified as negatively related to mtDNAcn. The multiple informant model showed a 10.4% lower level of mtDNAcn with each doubling increase of thallium levels (95% CI, -16.4%, -3.9%; P = 0.002). The observed associations were stronger among female newborns and among newborns born to older mothers.

CONCLUSIONS

The present study revealed a significant negative association between maternal thallium exposure during early pregnancy and cord blood leukocyte mtDNAcn in Chinese newborns, pointing to the important role of mitochondria as a target of thallium toxicity in early pregnancy.