Synthesis method, antibacterial and photocatalytic activity of ZnO nanoparticles for azo dyes in wastewater treatment: A review

Effect of pH on the Performance of Bi2O2CO3 Nanoplates for Methylene Blue Removal in Water by Adsorption and Photocatalysis

In this study, a facile low-temperature hydrothermal method was applied for the synthesis of bismuth subcarbonate nanoplates (Bi2O2CO3). The material was then characterized by FTIR, XRD, SEM, BET, and TGA. The applicability of Bi2O2CO3 was evaluated via the treatment of methyl blue (MB) in water by adsorption and photocatalytic degradation. The experiment results with different pH from 2 to 12 indicate that the pH of the solution affected the surface charge of the synthesized Bi2O2CO3, thus having strong effects on the adsorption and photocatalytic degradation abilities of Bi2O2CO3 for MB removal. In adsorption tests, pH 6–7 is the most suitable condition for the adsorption of Bi2O2CO3. In photocatalytic tests, Bi2O2CO3 had the highest and lowest efficiencies of 64.19% (pH 5) and 17.59% (pH 2), respectively, under UV irradiation for 300 min. Copyright © 2022 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).

Hydrothermal Synthesis and Photocatalytic Activity of NiO Nanoparticles under Visible Light Illumination

In this present study, Nickel oxide (NiO) nanoparticles (NPs) have been synthesized using the hydrothermal method and characterized using powder X-ray Diffraction (XRD), UV-vis and Fourier Transform Infra Red (FTIR) spectroscopies, Scanning Electron Microscopy (SEM), and Energy-Dispersive X-ray (EDX) methods. The result of the characterization indicates that the synthesized sample has a pure cubic phase of NiO with roughly spherical shape morphologies and respective estimated crystallinity and microstrain values of about 78% and 5.1. Test of the photocatalytic activity of the synthesized sample towards the model contaminant dye methylene blue (MB) shows a degradation efficiency of 46% in a period of 2 h under nature sunlight irradiation at natural pH and that the reaction could satisfactorily describe both pseudo-first-order and pseudo-second-order kinetic models. So, this synthesis method may potentially be used for the effective elimination of toxic organic pollutants from water and wastewater over prolonged exposure under natural sunlight without adding any oxidant or adjusting the pH of the reaction medium. Copyright © 2022 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0). 

Methods for Green Synthesis of Metallic Nanoparticles Using Plant Extracts and their Biological Applications - A Review

Nanotechnology, a fast-developing branch of science, is gaining extensive popularity among researchers simply because of the multitude of applications it can offer. In recent years, biological synthesis has been widely used instead of physical and chemical synthesis methods, which often produce toxic products. These synthesis methods are now being commonly adapted to discover new applications of nanoparticles synthesized using plant extracts. In this review, we elucidate the various ways by which nanoparticles can be biologically synthesized. We further discuss the applications of these nanoparticles.

Rubus ellipticus Sm. Fruit Extract Mediated Zinc Oxide Nanoparticles: A Green Approach for Dye Degradation and Biomedical Applications

Rubus ellipticus fruits aqueous extract derived ZnO-nanoparticles (NPs) were synthesized through a green synthesis method. The structural, optical, and morphological properties of ZnO-NPs were investigated using XRD, FTIR, UV-vis spectrophotometer, XPS, FESEM, and TEM. The Rietveld refinement confirmed the phase purity of ZnO-NPs with hexagonal wurtzite crystalline structure and p-63-mc space group with an average crystallite size of 20 nm. XPS revealed the presence of an oxygen chemisorbed species on the surface of ZnO-NPs. In addition, the nanoparticles exhibited significant in vitro antioxidant activity due to the attachment of the hydroxyl group of the phenols on the surface of the nanoparticles. Among all microbial strains, nanoparticles’ maximum antibacterial and antifungal activity in terms of MIC was observed against Bacillus subtilis (31.2 µg/mL) and Rosellinia necatrix (15.62 µg/mL), respectively. The anticancer activity revealed 52.41% of A549 cells death (IC₅₀: 158.1 ± 1.14 µg/mL) at 200 μg/mL concentration of nanoparticles, whereas photocatalytic activity showed about 17.5% degradation of the methylene blue within 60 min, with a final dye degradation efficiency of 72.7%. All these results suggest the medicinal potential of the synthesized ZnO-NPs and therefore can be recommended for use in wastewater treatment and medicinal purposes by pharmacological industries.

Photocatalytic and biological activities of green synthesized SnO2 nanoparticles using Chlorella vulgaris

AIMS

To produce tin oxide (SnO₂ ) nanoparticles (NP) with microalga for use in azo dye polluted wastewater treatment and to optimize the conditions to synthesize as small NPs as possible.

METHODS AND RESULTS

The green microalga Chlorella vulgaris mediated NPs were synthesized after an optimization process utilizing the statistical response surface methodology (RSM). The optimized synthesis conditions were 200 W microwave power, 0.5 mM SnCl₂ concentration, and 200 °C calcination temperature. Methyl orange (MO) was studied for its photocatalytic degradation with UV. Antibacterial activity against four pathogenic bacteria was studied using the well diffusion method. Cytotoxicity was measured using the MMT assay with lung cancer cell line A549, and antioxidant activity using DPPH radical scavenging. Following the optimization of their production, the produced crystalline SnO₂ NPs were on average 32.2 nm (by XRD) with a hydrodynamic size of 52.5 nm (by LDS). Photocatalytic degradation of MO under UV was nearly complete (94% removal) after 90 min and the particles could be reused for 5 cycles retaining 80% activity. The particles had antibacterial activity towards all five tested bacterial pathogens with the minimum inhibitory concentrations ranging from 22 to 36 μg/ml. The minimum bactericidal NP concentration varied between 83 and 136 μg/ml. Antioxidant activity was concentration dependent. A cytotoxicity was determined towards A549 cells with an LD50 of 188 μg/ml after 24 h of incubation, a concentration that is much higher than the active concentration for dye removal ranging from 22 to 36 μg/ml.

CONCLUSIONS

After optimization, SnO2 nanoparticles produced with C. vulgaris displayed high photocatalytic activity at concentrations below their antibacterial and cytotoxic activity.

SIGNIFICANCE AND IMPACT OF THE STUDY

The SnO₂ nanoparticles produced with the help of microalgae are suitable for the removal of MO dye from wastewater. Further applications of this green technology can be expected.

Phyto-mediated photocatalysis: a critical review of in-depth base to reactive radical generation for erythromycin degradation

Erythromycin (ERY), designated as a risk-prioritized macrolide antibiotic on the 2015 European Union watch list, is the third most commonly used antibiotic, most likely due to its ability to inhibit the protein. ERY has revealed record-high aquatic concentrations threatening the entire ecosystem and hence demands priority remedial measures. The inefficiency of various conventional ERY degradation methodologies opened up a gateway to advanced technologies. The conventional approach comprising of a chemically formulated, single photocatalyst has a major drawback of creating multiple environmental stresses. In this context, photocatalysis is grabbing tremendous attention as an efficient and cost-effective antibiotic treatment approach. Several studies have ascertained that ZnO, TiO₂, Fe₃O₄, and rGO nanoparticles possess remarkable pollution minimizing operational capabilities. Additionally, composites are found much more effective in antibiotic removal than single nanoparticles. In this review, an attempt has been made to provide a comprehensive baseline for efficient reactive radical production by a phyto-mediated composite kept under a certain source of irradiation. Considerable efforts have been directed towards the in-depth investigation of rGO-embedded, phyto-mediated ZnO/TiO₂/Fe₃O₄ photocatalyst fabrication for efficient ERY degradation, undergoing green photocatalysis. This detailed review provides photocatalytic nanocomposite individualities along with a hypothetical ERY degradation mechanism. It is assumed that derived information presented here will provoke innovative ideas for water purification incorporating green photocatalysis, initiating the construction of high-performance biogenic hierarchical nanocatalysts.

Halloysite-Zinc Oxide Nanocomposites as Potential Photocatalysts

The synthesis and structural characterization of synthetic zinc oxide and halloysite-based zinc oxide nanocomposites (with 2–28 m/m% ZnO content) are presented. The chemical precipitation of zinc hydroxide precursors and its subsequent drying at 80 °C yielded dominantly zinc oxide (zincite). Thermal treatment at 350 °C completely transformed the remaining precursor to ZnO without causing structural dehydroxylation of the halloysite support. The procedure yielded zinc oxide nanoparticles with 10–22 nm average size having quasi-spherical scale-like morphology. The specific surface area of the synthetic zinc oxide was found to be low (13 m2/g), which was significantly enhanced after nanocomposite preparation (27–47 m2/g). The photocatalytic activity of the prepared nanocomposites was probed by the degradation of a phenolic compound (4-nitrophenol) upon UV irradiation in liquid phase. Compared to their individual constituents, an increased activity of the nanocomposites was observed, while the SSA-normalized photocatalytic activity revealed a synergic effect in nanocomposites above 9 m/m% ZnO content. The nanocomposites were found to be stable at pH = 5.6, with a minor and major mobilization of zinc ions at pH = 12.4 and pH = 1.9, respectively. The toxicity of leachates in different pH environments by Vibrio fischeri bioluminescence indicated low toxicity for ZnO nanoparticles and insignificant toxicity for the nanocomposites. The enhanced photocatalytic activity together with the lower toxicity of the halloysite-ZnO nanocomposites highlight their application potential in water treatment.

Synthesis and characterization of cry protein coated zinc oxide nanocomposites and its assessment against bacterial biofilm and mosquito vectors

Mosquitoes need to be eradicated as they can spread deadly diseases. Cry toxic proteins from Bacillus and zinc oxide nanoparticles also can tremendously control pest and bacterial pathogens. With this reference, the Ac-ZnO NPs was effectively synthesized using Acorus calamus rhizomes extract where after incorporated with bacterial cry toxic protein (Btp) to produce Btp-Ac-ZnO nanocomposites. The XRD and FTIR, disclose the crystalline form with an average size of 17.47 nm and the possible biomolecules of Btp-Ac-ZnO NCs. SEM and TEM make known the well agglomerated and cone shape of Btp-Ac-ZnO NCs. The NCs show concentration-dependent antioxidant activity. Btp-Ac-ZnO NCs drastically arrest the formation of biofilm by the pathogenic bacteria such as E. faecalis, S. aureus, P. aeruginosa, and P. vulgaris at 100 μg/mL. All the above, the Btp-Ac-ZnO NCs exhibits superior larvicidal activity against three mosquito vectors namely Ae. aegypti, An. stephensi and Cx. quinquefasciatus with LC₅₀ values of 43.76, 39.60 and 37.13 μg/mL respectively. Besides, the biological enzymes are significantly reduced in the treated larvae than that of untreated one, which indicates the effect of Btp-Ac-ZnO NCs. Since, the Btp-Ac-ZnO NCs could be utilized against the pathogenic bacteria, and its biofilm structure, and also in the vector control sectors.

Morphologically Controllable Hierarchical ZnO Microspheres Catalyst and Its Photocatalytic Activity

The degradation of pollutants in wastewater using abundant resources and renewable energy sources, such as light, is attractive from an environmental perspective. ZnO is a well-known photocatalytic material. Therefore, in this study, a hierarchical ZnO microsphere precursor was prepared using a hydrothermal method. The precursor was subsequently annealed at different temperatures, which enabled the production of a ZnO catalyst having a controllable morphology. Specifically, as the annealing temperature increased, the precursor crystallized into hexagonal wurtzite and the crystallinity also increased. The catalysts were tested for their photocatalytic activity for the degradation of dye molecules (methylene blue and rhodamine B), and the catalyst sample annealed at 400 °C showed the best photocatalytic activity. The origin of this activity was studied using electron paramagnetic resonance spectroscopy and transient photocurrent measurements, and the structure of the optimal catalyst was invested using electron microscopy measurements, which revealed that it was formed of two-dimensional nanosheets having smooth surfaces, forming a 2D cellular network. Thus, we have presented a promising photocatalyst for the mineralization of organic contaminants in wastewater.

Current advancements on the fabrication, modification, and industrial application of zinc oxide as photocatalyst in the removal of organic and inorganic contaminants in aquatic systems

Industrial wastewaters contain hazardous contaminants that pollute the environment and cause socioeconomic problems, thus demanding the employment of effective remediation procedures such as photocatalysis. Zinc oxide (ZnO) nanomaterials have emerged to be a promising photocatalyst for the removal of pollutants in wastewater owing to their excellent and attractive characteristics. The dynamic tunable features of ZnO allow a wide range of functionalization for enhanced photocatalytic efficiency. The current review summarizes the recent advances in the fabrication, modification, and industrial application of ZnO photocatalyst based on the analysis of the latest studies, including the following aspects: (1) overview on the properties, structures, and features of ZnO, (2) employment of dopants, heterojunction, and immobilization techniques for improved photodegradation performance, (3) applicability of suspended and immobilized photocatalytic systems, (4) application of ZnO hybrids for the removal of various types of hazardous pollutants from different wastewater sources in industries, and (5) potential of bio-inspired ZnO hybrid nanomaterials for photocatalytic applications using renewable and biodegradable resources for greener photocatalytic technologies. In addition, the knowledge gap in this field of work is also highlighted.

Highly Efficient Photocatalyst Fabricated from the Chemical Recycling of Iron Waste and Natural Zeolite for Super Dye Degradation

In this paper, Fe2O3 and Fe2O3-zeolite nanopowders are prepared by chemical precipitation utilizing the rusted iron waste and natural zeolite. In addition to the nanomorphologies; the chemical composition, structural parameters, and optical properties are examined using many techniques. The Fe2O3-zeolite photocatalyst showed smaller sizes and higher light absorption in visible light than Fe2O3. Both Fe2O3 and Fe2O3-zeolite are used as photocatalysts for methylene blue (MB) photodegradation under solar light. The effects of the contact time, starting MB concentration, Fe2O3-zeolite dose, and pH value on photocatalytic performance are investigated. The full photocatalytic degradation of MB dye (10 mg/L) is achieved using 75 mg of Fe2O3-zeolite under visible light after 30 s, which, to the best of our knowledge, is the highest performance yet for Fe2O3-based photocatalysts. This photocatalyst has also shown remarkable stability and recyclability. The kinetics and mechanisms of the photocatalytic process are studied. Therefore, the current work can be applied industrially as a cost-effective method for eliminating the harmful MB dye from wastewater and recycling the rusted iron wires.

Structure and Photocatalytic Activity of Copper and Carbon-Doped Metallic Zn Phase-Rich ZnO Oxide Films

ZnO is one of the most important industrial metal oxide semiconductors. However, in order to fully realise its potential, the electronic structure of ZnO has to be modified to better fit the needs of specific fields. Recent studies demonstrated that reactive magnetron sputtering under Zn-rich conditions promotes the formation of intrinsic ZnO defects and allows the deposition of metallic Zn phase-rich ZnO films. In photocatalytic efficiency tests these films were superior to traditional ZnO oxide, therefore, the purposeful formation of intrinsic ZnO defects, namely Zn interstitials and oxygen vacancies, can be considered as advantageous self-doping. Considering that such self-doped ZnO remains a semiconductor, the natural question is if it is possible to further improve its properties by adding extrinsic dopants. Accordingly, in the current study, the metallic Zn phase-rich ZnO oxide film formation process (reactive magnetron sputtering) was supplemented by simultaneous sputtering of copper or carbon. Effects of the selected dopants on the structure of self-doped ZnO were investigated by X-ray diffractometer, scanning electron microscope, X-ray photoelectron spectroscope and photoluminescence techniques. Meanwhile, its effect on photocatalytic activity was estimated by visible light activated bleaching of Methylene Blue. It was observed that both dopants modify the microstructure of the films, but only carbon has a positive effect on photocatalytic efficiency.

Impact of novel deflocculant ZnO/Chitosan nanocomposite film in disperser pretreatment enhancing energy efficient anaerobic digestion: Parameter assessment and cost exploration

This paper proposed to interpret the novel method of extracellular polymeric substance (EPS) removal in advance to sludge disintegration to enrich bioenergy generation. The sludge has been subjected to deflocculation using Zinc oxide/Chitosan nanocomposite film (ZCNF) and achieved 98.97% of solubilization which enhance the solubilization of organics. The obtained result revealed that higher solubilization efficiency of 23.3% was attained at an optimal specific energy of 2186 kJ/kg TS and disintegration duration of 30 min. The deflocculated sludge showed 8.2% higher solubilization than the flocculated sludge emancipates organics in the form of 1.64 g/L of SCOD thereby enhancing the methane generation. The deflocculated sludge produces methane of 230 mL/g COD attained overall solid reduction of 55.5% however, flocculated and control sludge produces only 182.25 mL/g COD and 142.8 mL/g COD of methane. Based on the energy, mass and cost analysis, the deflocculated sludge saved 94.1% of energy than the control and obtained the net cost of 5.59 $/t which is comparatively higher than the flocculated and control sludge.

pH Shock-promoted lysozyme corona for efficient pathogenic infections treatment: Effects of surface chemistry of mesoporous silica nanoparticles and loading method

The emergence of antibiotic resistant bacteria because of the antibiotics abusement was the motivation to develop the effective alternatives to traditional antibiotics. Hence, various lysozyme corona were prepared through the physical and covalent attachment of lysozyme molecules onto either the bare or carboxyl-functionalized mesoporous silica particles. The prepared samples were characterized by STEM, TGA/DTA, zeta potential, FTIR, UV-vis and CD spectroscopic methods. All the prepared lysozyme-coated particles exhibited an efficient antibacterial activity against Listeria monocytogenes, as a case study, in vitro with no cytotoxicity. The minimal inhibition concentration (MIC) of the lysozyme-physically adsorbed bare and carboxyl-functionalized mesoporous silica nanoparticles (L-MS and L-ads-CMS, respectively) and the lysozyme-covalently attached carboxyl-functionalized MS particles (L-cov-CMS) was 2, 5.3 and 1.7 folds lower than that of the free lysozyme, respectively. Additionally, for the first time, it was reported that the pretreatment of lysozyme corona of L-ads-CMS through inducing a pH-shock can lead to the enhancement of antibacterial properties thereof. This behavior was associated to the controlled release of the immobilized lysozyme molecules and their conformational stability. These natural antibacterial lysozyme-coated silica nanoparticles showing the "pH-shock enhanced activity" could be of utmost interest for design of the highly active enzyme-modified nanoparticles.

Synthesis and Characterization of Zinc Oxide Nanoparticles Using Acacia caesia Bark Extract and Its Photocatalytic and Antimicrobial Activities

This paper presents the green synthesis and characterization of ZnO nanoparticles and their microbial and photocatalytic application. The green synthesis of ZnO nanoparticles was carried out using Zinc nitrate hexahydrate and the bark extract of Acacia caesia (L.) Willd. The nanoparticles were synthesized at an optimum temperature of 65 °C followed by calcination at 400 °C. The samples were characterized using UV-visible spectroscopy, SEM, XRD, FTIR and EDX analysis. UV-visible spectroscopy showed a characteristic peak at 338 nm and the bandgap energy was found to be 3 eV which is specific for ZnO. SEM confirmed the presence of ZnO on its nanoscale. EDX gave the elemental details of Zinc constituting to 37.77% and Oxygen comprising 20.77% of its atomic weight. XRD analysis gave the diffractogram indexed at various angles corresponding to ZnO nanoparticles. It also revealed the average crystalline size to be 32.32 nm and the shape was found to be hexagonal. The functional group present in the nanoparticles was characterized using FTIR, which gave a characteristic peak at 485 cm−1. The synthesized nanoparticles exhibited significant photocatalytic (methyl blue under UV irradiation). The presence of nanoparticles induces changes in its kinetics, whose rate constants and correlation coefficients were analyzed during the photocatalytic degradation of the model pollutant Methyl Blue. Studies on antibacterial (Escherichia coli, Staphylococcus aureus), antifungal (Aspergillus niger, Candida albicans) and anti-inflammatory (COX assay) properties were also carried out. The nanoparticles were synthesized in an eco-friendly and cost-effective method. The study opens new horizons in the field of water treatment, biosensors and nanotechnology.

Unlocking the potential of biosynthesized zinc oxide nanoparticles for degradation of synthetic organic dyes as wastewater pollutants

The azo dyes released into water from different industries are accumulating in the water bodies and bioaccumulating within living systems thereby affecting environmental health. This is a major concern in developing countries where stringent regulations are not followed for the discharge of industrial waste into water bodies. This has led to the accumulation of various pollutants including dyes. As these developing countries also face acute water shortages and due to the lack of cost-effective systems to remove these pollutants, it is essential to remove these toxic dyes from water bodies, eradicate dyes, or generate fewer toxic derivatives. The photocatalysis mechanism of degradation of azo dyes has gained importance due to its eco-friendly and non-toxic roles in the environment. The zinc nanoparticles act as photocatalysts in combination with plant extracts. Plant-based nanoparticles over the years have shown the potential to degrade dyes efficiently. This is carried out by adjusting the dye and nanoparticle concentrations and combinations of nanoparticles. Our review article considers increasing the efficiency of degradation of dyes using zinc oxide (ZnO) nanoparticles and understanding the photocatalytic mechanisms in the degradation of dyes and the toxic effects of these dyes and nanoparticles in different tropic levels.

Carbon and polymer-based magnetic nanocomposites for oil-spill remediation-a comprehensive review

Oil spills are a major contributor to water contamination, which sets off a significant impact on the environment, biodiversity, and economy. Efficient removal of oil spills is needed for the protection of marine species as well as the environment. Conventional approaches are not efficient enough for oil-water separation; therefore, effective strategies and efficient removal techniques (and materials) must be developed to restore the contaminated marine to its normal ecology. Several research studies have shown that nanotechnology provides efficient features to clean up these oil spills from the water using magnetic nanomaterials, particularly carbon/polymer-based magnetic nanocomposites. Surface modification of these nanomaterials via different techniques render them with salient innovative features. The present review discusses the advantages and limitations of conventional and advanced techniques for the oil spills removal from wastewater. Furthermore, the synthesis of magnetic nanocomposites, their utilization in oil-water separation, and adsorption mechanisms are discussed. Finally, the advancement and future perspectives of magnetic nanocomposites (particularly of carbon and polymer-based magnetic nanocomposites) in environmental remediation are presented.

A review of recent and emerging antimicrobial nanomaterials in wastewater treatment applications

In this paper, we present a critical review on antimicrobial nanomaterials with demonstrated potential for application as a disinfection technology in wastewater treatment. Studies involving fabrication and testing of antimicrobial nanomaterials for wastewater treatment were gathered, critically reviewed, and analyzed. Our review shows that there are only a few eligible candidate nanoparticles (NPs) (metal and metal oxide) that can adequately serve as an antimicrobial agent. Nanosilver (nAg) was the most studied and moderately understood metal NPs with proven antimicrobial activity followed by ZnO (among antimicrobial metal oxide NPs) which outperformed titania (in the absence of light) in efficacy due to its better solubility in aqueous condition. The direction of future work was found to be in the development of antimicrobial nanocomposites, since they provide more stability for antimicrobial metal and metal oxides NPs in water, thereby increasing their activity. This review will serve as an updated survey, yet touching also the fundamentals of the antimicrobial activity, with vital information for researchers planning to embark on the development of superior antimicrobial nanomaterials for wastewater treatment applications.

Enhanced Photocatalytic Activity of rGO-CuO Nanocomposites for the Degradation of Organic Pollutants

Copper oxide (CuO) nanoparticles (NPs) were decorated on reduced graphene oxide (rGO) through the effective synthetic route method. Powder X-ray diffraction, Fourier transform infrared, ultraviolet-visible absorption, and scanning electron microscopy techniques were used to analyze the chemical structure, functional groups, absorbance, and morphology. Under visible light illumination, the CuO/rGO nanocomposites have higher catalytic activity compared to the bare CuO NPs which were suitable for degradation of methylene blue (MB) and Congo red (CR) dyes. According to the findings, the CuO/rGO nanocomposites possess excellent photocatalytic efficiency. Thus, the synthesized CuO/rGO nanocomposite is a promising photocatalyst for the deterioration of organic pollutants in water and wastewater treatment.

Visible light-conducting polymer nanocomposites as efficient photocatalysts for the treatment of organic pollutants in wastewater

This review compiles recent advances and challenges on photocatalytic treatment of wastewater using nanoparticles, nanocomposites, and polymer nanocomposites as photocatalyst. The review provides an overview of the fundamental principles of photocatalytic treatment along the recent advances on photocatalytic treatment, especially on the modification strategies and operational conditions to enhance treatment efficiency and removal of recalcitrant organic contaminants. The different types of photocatalysts along the key factors influencing their performance are also critically discussed and recommendations for future research are provided.

NIR-triggered photocatalytic and photothermal performance for sterilization based on copper sulfide nanoparticles anchored on Ti3C2Tx MXene

Harmful bacterial flourish with the increase in environmental pollution and pose a great threat to human health. Thus, developing new and efficient antibacterial materials is imperative to reduce the pollution caused by traditional sterilization materials and improve sterilization efficiency. In this study, a new photocatalytic antibacterial material was developed to achieve an efficient antibacterial effect. Ti₃C₂T_x@CuS composites were synthesized by simple hydrothermal method, by which copper sulfide (CuS) nanoparticles were anchored on the surface of Ti₃C₂T_x to sharply improve the photocatalytic its antibacterial ability. Ti₃C₂T_x@CuS exhibits excellent antibacterial activity against Escherichia coli and Staphylococcus aureus with bactericidal rates of 99.6% and 99.1%, respectively. Photoluminescence spectroscopy (PL), decay time PL, photocurrent test, electrochemical impedance spectroscopy and finite element method showed that the formation of Ti₃C₂T_x@CuS heterojunction promoted the separation of electrons and holes, improved the electron transport efficiency, and elevated the generation of reactive oxygen species. Moreover, Ti₃C₂T_x@CuS has a stronger photothermal effect and causes more heat release than CuS to improve antibacterial performance. The Ti₃C₂T_x@CuS heterojunction has a broad application prospect in the disinfection and antibacterial fields.

The potential of nanomaterials associated with plant growth-promoting bacteria in agriculture

The impacts of chemical fertilizers and pesticides have raised public concerns regarding the sustainability and security of food supplies, prompting the investigation of alternative methods that have combinations of both agricultural and environmental benefits, such as the use of biofertilizers involving microbes. These types of microbial inoculants are living microorganisms that colonize the soil or plant tissues when applied to the soil, seeds, or plant surfaces, facilitating plant nutrient acquisition. They can enhance plant growth by transforming nutrients into a form assimilable by plants and by acting as biological control agents, known as plant growth-promoting bacteria. The potential use of bacteria as biofertilizers in agriculture constitutes an economical and eco-friendly way to reduce the use of chemical fertilizers and pesticides. In this context, nanotechnology has emerged as a new source of quality enrichment for the agricultural sector. The use of nanoparticles can be an effective method to meet the challenges regarding the effectiveness of biofertilizers in natural environments. Given the novel sustainable strategies applied in agricultural systems, this review addresses the effects of nanoparticles on beneficial plant bacteria for promoting plant growth.

Enhanced Adsorptive Removal of Dyes Using Mandarin Peel Biochars via Chemical Activation with NH4Cl and ZnCl2

This study examined differences in the adsorption kinetics, isotherms, and thermodynamics of the dyes (methyl orange and fast green FCF) by pristine (M–biochar) and chemical activated mandarin peel biochars (MN–biochar and MZ–biochar). The specific surface area (1085.0 m2/g) and pore volume (0.194 cm3/g) of MZ-biochar much higher than those of the M–biochar (specific surface area = 8.5 m2/g, pore volume = 0.016 cm3/g) and MN–biochar (specific surface area = 181.1 m2/g, pore volume = 0.031 cm3/g). The equilibrium adsorption capacities (mg/g) of MO and FG using M–biochar (MO = 0.95, FG = 0.78) MN–biochar (MO = 2.52, FG = 2.13), and MZ–biochar (MO = 16.27, FG = 12.44) have well-matched the pseudo-second-order model (R2 ≥ 0.952) compared with the pseudo-first-order model (R2 ≥ 0.008). Furthermore, the better explanation of the adsorption behavior of dyes by the Freundlich isotherm model (R2 ≥ 0.978) than the Langmuir isotherm model (R2 ≥ 0.881) supports the assumption that the multilayer adsorption governed the adsorption of dyes using mandarin peel biochars. The adsorptions of dyes were significantly dependent on the solution pH and temperature since the electrostatic and spontaneous endothermic reactions governed their removal using the pristine and chemical activated mandarin peel biochars.

Effects of Ag Nanoparticles on Zinc Oxide Photocatalytic Performance

We used a sol–gel spin coating technique to synthesize nanocomposite thin films based on zinc oxide (ZnO) loaded with silver nanoparticles (NPs). We tested these ZnO/Ag NPs photocatalysts, with a thickness of about 100 nm, for the photodegradation of the indigo carmine dye solution. The study focused on the effects of Ag NPs on the ZnO matrix as well as the impact of their concentration on the photocatalytic performance of the nanocomposite. The study also highlighted the high stability of the photocatalytic performance of these nanocomposites. This work is a contribution in the search for non-toxic thin film photocatalysts that is usable under solar radiation for the treatment of contaminated wastewater. Innovation in the field of heterogeneous photocatalysis requires the use of solar resource with efficient results in terms of photocatalytic performance.

Facile production of three-dimensional chitosan fiber embedded with zinc oxide as recoverable photocatalyst for organic dye degradation

Herein we report on a facile and green strategy for continuous production of chitosan-zinc oxide fibers and then compare their photodegradation performance against three organic dyes (i.e., methylene blue (MB), methyl orange (MO) and Rhodamine B, respectively) under different lights. Chitosan-zinc hydrogel fibers (CS/Zn) with different zinc loadings are obtained by direct mixing of chitosan and zinc acetate solutions using a double-syringe injection device. The as-prepared CS/Zn fibers are then immersed into glutaraldehyde (GA) and sodium hydroxide solutions, respectively, and dried at T = 50 °C. The resultant CS/ZnO/GA fibers of ca. 617 μm in diameter are characterized using X-ray diffraction (XRD), thermogravimetric analysis and field emission scanning electron microscope (FE-SEM). XRD and FE-SEM data confirm that the CS/ZnO/GA fibers consist of a large amount of hexagonal wurtzite ZnO nanorods up to 550 nm in length, and exhibit three-dimensional interconnected macroporous architecture. Photodegradation results clearly show that the CS/ZnO/GA fibers are effective for the removal of organic dyes upon UV irradiation and can be easily recovered and reused for at least 6 consecutive cycles. Unlike most reported CS/ZnO nanocomposites, the current CS/ZnO/GA fiber shows a higher adsorption of cationic MB rather than anionic MO, the mechanism of which is proposed.

Improvement of Laccase Activity Via Covalent Immobilization over Mesoporous Silica Coated Magnetic Multiwalled Carbon Nanotubes for the Discoloration of Synthetic Dyes

Due to its environmental friendliness and biodegradable ability, the enzymatic decolorization of azo dyes is the best option. However, the free enzyme suffers from various limitations, including poor stability, no repeatable use, and a high expense, which is the key drawback for its practical use. In this analysis, the laccase enzyme was immobilized in mesoporous silica coated magnetic multiwalled carbon nanotubes (Fe₃O₄-MWCNTs@SiO₂) by a glutaraldehyde cross-linker to create an easily separable and stable enzyme. Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDX) were used to characterize the as-synthesized Fe₃O₄-MWCNTs@SiO₂. Laccase immobilized in Fe₃O₄-MWCNTs@SiO₂ showed a good improvement in temperature, pH, and storage stability. Moreover, the operational stability of the biocatalyst was improved, retaining 87% of its original activity even after 10 cycles of 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) oxidation. The biocatalysts were applied for the decolorization of selected azo dyes without a mediator, and up to 99% of Eriochrome Black T (EBT), 98% of Acid Red 88 (AR 88), and 66% of Reactive Black 5 (RB5) were decolorized. Based on these properties, the biocatalysts can be potentially utilized in various environmental and industrial applications.

Multifunctional application of PVA-aided Zn-Fe-Mn coupled oxide nanocomposite

Zinc oxide (ZnO) is a fascinating semiconductor material with many applications such as adsorption, photocatalysis, sensor, and antibacterial activities. By using a poly (vinyl alcohol) (PVA) polymer as a capping agent and metal oxides (iron and manganese) as a couple, the porous PVA-aided Zn/Fe/Mn ternary oxide nanocomposite material (PTMO-NCM) was synthesized. The thermal, optical, crystallinity, chemical bonding, porosity, morphological, charge transfer properties of the synthesized materials were confirmed by DTG/DSC, UV-Vis-DRS, XRD, FT-IR, BET, SEM-EDAX/TEM-HRTEM-SAED, and CV/EIS/amperometric analytical techniques, respectively. The PTMO-NCM showed an enhanced surface area and charge transfer capability, compared to ZnO. Using the XRD pattern and TEM image analysis, the crystalline size of the materials was confirmed to be in the nanometer range. The porosity and superior charge transfer capabilities of the PTMO-NCM were confirmed from the BET, HRTEM (IFFT)/SAED, and CV/EIS analysis. The adsorption kinetics (adsorption reaction/adsorption diffusion) and adsorption isotherm test confirmed the presence of a chemisorption type of adsorbate/methylene blue dye-adsorbent/PTMO-NCM interaction. The photocatalytic performance was tested on the Congo red and Acid Orange-8 dyes. The superior ascorbic acid sensing capability of the material was understood from CV and amperometric analysis. The noble antibacterial activities of the material were also confirmed on both gram-negative and gram-positive bacteria.

ZnO nanoparticles as photodegradation agent controlled by morphology and boron doping

ZnO nanoparticles with different morphology and doping possess different atomic planes at their interfaces. This changed their catalytic efficiency during degradation experiments with dyes, significantly dependent also on used dopant concentrations.