Pharmaceutical assessment of polyvinylpyrrolidone (PVP): As excipient from conventional to controlled delivery systems with a spotlight on COVID-19 inhibition

X-ray Diffraction of Water in Polyvinylpyrrolidone

PVP is a hydrophilic polymer commonly used as an excipient in pharmaceutical formulations. Here we have performed time-resolved high-energy X-ray scattering experiments on pellets of PVP at different humidity conditions for 1-2 days. A two-phase exponential decay in water sorption is found with a peak in the differential pair distribution function at 2.85 Å, which is attributed to the average (hydrogen bonded) carbonyl oxygen-water oxygen distance. Additional scattering measurements on powders with fixed compositions ranging from 2 to 12.3 wt % H2O were modeled with Empirical Potential Structure Refinement (EPSR). The models reveal approximately linear relations between the carbonyl oxygen-water oxygen coordination number (nOC-OW) and the water oxygen-water oxygen coordination number (nOW-OW) versus water content in PVP. A stronger preference for water-water hydrogen bonding over carbonyl-water bonding is found. At all the concentrations studied the majority of water molecules were found to be randomly isolated, but a wide distribution of coordination environments of water molecules is found within the PVP polymer strands at the highest concentrations. Overall, the EPSR models indicate a continuous evolution in structure versus water content with nOW-OW=1 occurring at ∼12 wt % H2O, i.e., the composition where, on average, each water molecule is surrounded by one other water molecule.

Effectiveness of mouthwashes on reducing SARS-CoV-2 viral load in oral cavity: a systematic review and meta-analysis

BACKGROUND

The risk of SARS-COV-2 transmission is relatively high during dental procedures. A study was conducted to investigate the effects of mouthwashes on SARS-COV-2 viral load reduction in the oral cavity.

METHODS

A systematic search was performed in PubMed, EMBASE, Scopus, Web of Science, and Cochrane library for relevant studies up to 20 July, 2022. Randomized and non-randomized clinical trial and quasi-experimental studies evaluating patients with Covid-19 infection (patients) who used mouthwashes (intervention) compared to the same patients before using the mouthwash (comparison) for reducing the SARS-COV-2 load or increasing the cycle threshold (Ct) value (outcome) were searched according to PICO components. Three independent reviewers conducted literature screening and data extraction. The Modified Downs and Black checklist was used for quality assessment. A meta-analysis was performed with a random effects model in the Revman 5.4.1software using the mean difference (MD) of cycle threshold (Ct) values.

RESULTS

Of 1653 articles, 9 with a high methodological quality were included. A meta-analysis indicated that 1% Povidone-iodine (PVP-I) was an effective mouthwash for reducing the SARS-COV-2 viral load [MD 3.61 (95% confidence interval 1.03, 6.19)]. Cetylpyridinium chloride (CPC) [MD 0.61 (95% confidence interval -1.03, 2.25)] and Chlorhexidine gluconate (CHX) [MD -0.04 95% confidence interval (-1.20, 1.12)] were not effective against SARS-COV-2.

CONCLUSION

Using mouthwashes containing PVP-I may be recommended for reducing the SARS-COV-2 viral load in the oral cavity of patients before and during dental procedures, while the evidence is not sufficient for such effects for CPC and CHX-containing mouthwashes.

Nanoparticle Synthesis and Their Integration into Polymer-Based Fibers for Biomedical Applications

The potential of nanoparticles as effective drug delivery systems combined with the versatility of fibers has led to the development of new and improved strategies to help in the diagnosis and treatment of diseases. Nanoparticles have extraordinary characteristics that are helpful in several applications, including wound dressings, microbial balance approaches, tissue regeneration, and cancer treatment. Owing to their large surface area, tailor-ability, and persistent diameter, fibers are also used for wound dressings, tissue engineering, controlled drug delivery, and protective clothing. The combination of nanoparticles with fibers has the power to generate delivery systems that have enhanced performance over the individual architectures. This review aims at illustrating the main possibilities and trends of fibers functionalized with nanoparticles, focusing on inorganic and organic nanoparticles and polymer-based fibers. Emphasis on the recent progress in the fabrication procedures of several types of nanoparticles and in the description of the most used polymers to produce fibers has been undertaken, along with the bioactivity of such alliances in several biomedical applications. To finish, future perspectives of nanoparticles incorporated within polymer-based fibers for clinical use are presented and discussed, thus showcasing relevant paths to follow for enhanced success in the field.

Innovative Functional Biomaterials as Therapeutic Wound Dressings for Chronic Diabetic Foot Ulcers

The imbalance of local and systemic factors in individuals with diabetes mellitus (DM) delays, or even interrupts, the highly complex and dynamic process of wound healing, leading to diabetic foot ulceration (DFU) in 15 to 25% of cases. DFU is the leading cause of non-traumatic amputations worldwide, posing a huge threat to the well-being of individuals with DM and the healthcare system. Moreover, despite all the latest efforts, the efficient management of DFUs still remains a clinical challenge, with limited success rates in treating severe infections. Biomaterial-based wound dressings have emerged as a therapeutic strategy with rising potential to handle the tricky macro and micro wound environments of individuals with DM. Indeed, biomaterials have long been related to unique versatility, biocompatibility, biodegradability, hydrophilicity, and wound healing properties, features that make them ideal candidates for therapeutic applications. Furthermore, biomaterials may be used as a local depot of biomolecules with anti-inflammatory, pro-angiogenic, and antimicrobial properties, further promoting adequate wound healing. Accordingly, this review aims to unravel the multiple functional properties of biomaterials as promising wound dressings for chronic wound healing, and to examine how these are currently being evaluated in research and clinical settings as cutting-edge wound dressings for DFU management.

A general method for quantitative fractionation of mammalian cells

Subcellular fractionation in combination with mass spectrometry-based proteomics is a powerful tool to study localization of key proteins in health and disease. Here we offered a reliable and rapid method for mammalian cell fractionation, tuned for such proteomic analyses. This method proves readily applicable to different cell lines in which all the cellular contents are accounted for, while maintaining nuclear and nuclear envelope integrity. We demonstrated the method's utility by quantifying the effects of a nuclear export inhibitor on nucleoplasmic and cytoplasmic proteomes.

The preparation, resources, applications, and future trends of nanofibers in active food packaging: a review

Active packaging is a novel strategy for maintaining the shelf life of products and ensuring their safety, freshness, and integrity that has emerged with the consumer demand for safer, healthier, and higher quality food. Nanofibers have received a lot of attention for the application in active food packaging due to their high specific surface area, high porosity, and high loading capacity of active substances. Three common methods (electrospinning, solution blow spinning, and centrifugal spinning) for the preparation of nanofibers in active food packaging and their influencing parameters are presented, and advantages and disadvantages between these methods are compared. The main natural and synthetic polymeric substrate materials for the nanofiber preparation are discussed; and the application of nanofibers in active packaging is elaborated. The current limitations and future trends are also discussed. There have been many studies on the preparation of nanofibers using substrate materials from different sources for active food packaging. However, most of these studies are still in the laboratory research stage. Solving the issues of preparation efficiency and cost of nanofibers is the key to their application in commercial food packaging.

Comparative Study of Selected Excipients' Influence on Carvedilol Release from Hypromellose Matrix Tablets

Solid dosage forms based on hypromellose (HPMC) with prolonged/extended drug release are very important from the research and industrial viewpoint. In the present research, the influence of selected excipients on carvedilol release performance from HPMC-based matrix tablets was studied. A comprehensive group of selected excipients was used within the same experimental setup, including different grades of excipients. Compression mixtures were directly compressed using constant compression speed and main compression force. LOESS modelling was used for a detailed comparison of carvedilol release profiles via estimating burst release, lag time, and times at which a certain % of carvedilol was released from the tablets. The overall similarity between obtained carvedilol release profiles was estimated using the bootstrapped similarity factor (f₂). In the group of water-soluble carvedilol release modifying excipients, which produced relatively fast carvedilol release profiles, POLYOXᵀᴹ WSR N-80 and Polyglykol^® 8000 P demonstrated the best carvedilol release control, and in the group of water-insoluble carvedilol release modifying excipients, which produced relatively slow carvedilol release profiles, AVICEL^® PH-102 and AVICEL^® PH-200 performed best.

Bulk Flow Optimisation of Amorphous Solid Dispersion Excipient Powders through Surface Modification

Particulate amorphous solid dispersions (ASDs) have been recognised for their potential to enhance the performance of various solid dose forms, especially oral bioavailability and macromolecule stability. However, the inherent nature of spray-dried ASDs leads to their surface cohesion/adhesion, including hygroscopicity, which hinders their bulk flow and affects their utility and viability in terms of powder production, processing, and function. This study explores the effectiveness of L-leucine (L-leu) coprocessing in modifying the particle surface of ASD-forming materials. Various contrasting prototype coprocessed ASD excipients from both the food and pharmaceutical industries were examined for their effective coformulation with L-leu. The model/prototype materials included maltodextrin, polyvinylpyrrolidone (PVP K10 and K90), trehalose, gum arabic, and hydroxypropyl methylcellulose (HPMC E5LV and K100M). The spray-drying conditions were set such that the particle size difference was minimised, so that it did not play a substantial role in influencing powder cohesion. Scanning electron microscopy was used to evaluate the morphology of each formulation. A combination of previously reported morphological progression typical of L-leu surface modification and previously unreported physical characteristics was observed. The bulk characteristics of these powders were assessed using a powder rheometer to evaluate their flowability under confined and unconfined stresses, flow rate sensitivities, and compactability. The data showed a general improvement in maltodextrin, PVP K10, trehalose and gum arabic flowability measures as L-leu concentrations increased. In contrast, PVP K90 and HPMC formulations experienced unique challenges that provided insight into the mechanistic behaviour of L-leu. Therefore, this study recommends further investigations into the interplay between L-leu and the physico-chemical properties of coformulated excipients in future amorphous powder design. This also revealed the need to enhance bulk characterisation tools to unpack the multifactorial impact of L-leu surface modification.

Synthesis and Micellization Behavior of Amphiphilic Block Copolymers of Poly(N-vinyl Pyrrolidone) and Poly(Benzyl Methacrylate): Block versus Statistical Copolymers

Block copolymers of N-vinyl pyrrolidone (NVP) and benzyl methacrylate (BzMA), PNVP-b-PBzMA, were prepared by RAFT polymerization techniques and sequential addition of monomers. The copolymers were characterized by Size Exclusion Chromatography (SEC) and NMR spectroscopy. Differential Scanning Calorimetry (DSC), Thermogravimetric Analysis (TGA) and Differential Thermogravimetry (DTG) were employed to study the thermal properties of these copolymers. The micellization behavior in THF, which is a selective solvent for the PBzMA blocks, was examined. For comparison the self-assembly properties of the corresponding statistical copolymers, PNVP-stat-PBzMA, were studied. In addition, the association behavior in aqueous solutions was analyzed for the block copolymers, PNVP-b-PBzMA. In this case, the solvent is selective for the PNVP blocks. Dilute solution viscometry, static (SLS) and dynamic light scattering (DLS) were employed as the tools to investigate the micellar assemblies. The efficient encapsulation of the hydrophobic curcumin within the micellar core of the supramolecular structures in aqueous solutions was demonstrated by UV-Vis spectroscopy and DLS measurements.

Design, Development, and Evaluation of Constant Voltage Iontophoresis for the Transungual Delivery of Efinaconazole

The efficacy of topical antifungal therapy in onychomycosis has been hindered by the failure of the antimycotic to permeate the nail plate. This research aims to design and develop a transungual system for the effective delivery of efinaconazole utilizing constant voltage iontophoresis. Seven prototype drug-loaded hydrogel formulations (E1-E7) were prepared to assess the influence of solvent (ethanol) and cosolvent (Labrasol^®) on transungual delivery. Optimization was performed to evaluate the effect of three independent variables; voltage, solvent-to-cosolvent ratio, and penetration enhancer (PEG 400) concentration on critical quality attributes (CQAs), such as drug permeation and loading into the nail. The selected hydrogel product was characterized for pharmaceutical properties, efinaconazole release from the nail, and antifungal activity. Preliminary data indicates ethanol, Labrasol^®, and voltage influence the transungual delivery of efinaconazole. Optimization design indicates a significant impact by applied voltage (p-0.0001) and enhancer concentration (p-0.0004) on the CQAs. Excellent correlation between selected independent variables and CQAs was confirmed by the high desirability value (0.9427). A significant (p < 0.0001) enhancement in the permeation (~78.59 µg/cm²) and drug loading (3.24 µg/mg) was noticed in the optimized transungual delivery with 10.5 V. FTIR spectral data indicates no interaction between the drug and excipients, while the DSC thermograms confirmed the amorphous state of the drug in the formulation. Iontophoresis produces a drug depot in the nail that releases above the minimum inhibitory concentration level for an extended period, potentially reducing the need for frequent topical treatment. Antifungal studies further substantiate the release data and have shown remarkable inhibition of Trichophyton mentagrophyte. Overall, the promising results obtained here demonstrate the prospective of this non-invasive method for the effective transungual delivery of efinaconazole, which could improve the treatment of onychomycosis.

Plaster Gel Loaded with Silver Nanoparticle-Mediated Ganoderma applanatum: from Fabrication to Evaluation

Traditional Asian remedies have mainly employed the macrofungus Ganoderma applanatum, which belongs to the family Ganodermataceae, as a medicinal mushroom due to its high antibacterial and antioxidant activity. Extracts of the fungus can be synthesized into nanoparticles, which are subsequently produced as plaster gels. Synthesized silver nanoparticle-mediated G. applanatum was discovered to have the greatest ability to inhibit bacterial growth in S. epidermidis. When applied to the skin, the prepared plaster gel converted from a gel to a film; thus, both gel and film generation are characteristic of its formulation. The plaster gel that was made was found to be consistent and attractive, and the yellow color had darkened. Its viscosity and pH were appropriate for the application and allowed it to remain on the skin without dripping or reacting with the skin until it dried. A shorter duration for film formation is possible. The film's tensile was slightly reduced, and it exhibited excellent thermal stability. Decomposition of the generated film occurred at a slower rate, which constrained the polymer chain's ability to move. The semi-crystalline structure was characteristic of the film. It was found that particles were distributed in the film. Rapid release from plaster gel within 4 h was seen, and this was followed by a period of a slowly declining release rate over 12 h. The accurate first-order kinetic used to estimate the release rate of the formulation. The plaster gel demonstrated greater antibacterial activity than the MIC value indicated. The in vivo evaluation was positive and showed no skin irritation. The formulation showed good stability. Therefore, this indicated that the prepared plaster gel is appropriate for topical pharmaceutical delivery and safe for skin application.

Development and Evaluation of an Innovative Approach Using Niosomes Based Polymeric Microneedles to Deliver Dual Antioxidant Drugs

Ascorbic acid (AA) and caffeine (CAFF) work to protect cells from ultraviolet (UV) radiation and slow down the photoaging process of the skin. However, cosmetic application of AA and CAFF is limited due to poor penetration across the skin and rapid oxidation of AA. The aim of this study was to design and evaluate the dermal delivery of dual antioxidants utilizing microneedles (MNs) loaded with AA and CAFF niosomes. The niosomal nanovesicles were prepared using the thin film method and had particle sizes ranging from 130.6-411.2 nm and a negative Zeta potential of around -35 mV. The niosomal formulation was then combined with polyvinylpyrrolidone (PVP) and polyethylene glycol 400 (PEG 400) to create an aqueous polymer solution. The best skin deposition of AA and CAFF was achieved with the formulation containing 5% PEG 400 (M3) and PVP. Furthermore, the role of AA and CAFF as antioxidants in preventing cancer formation has been well-established. Here we validated the antioxidant properties of ascorbic acid (AA) and caffeine (CAFF) in a novel niosomal formulation referred to as M3 by testing its ability to prevent H₂O₂-indued cell damage and apoptosis in MCF-7 breast cancer cells. Results showed that M3 was able to shield MCF-7 cells from H₂O₂ induced damage at concentrations below 2.1 µg/mL for AA and 1.05 µg/mL for CAFF, and also exhibited anticancer effects at higher concentrations of 210 µg/mL for AA and 105 µg/mL. The formulations were stable for two months at room temperature in terms of moisture and drug content. The use of MNs and niosomal carriers could be a promising approach for dermal delivery of hydrophilic drugs like AA and CAFF.

Physicochemical Properties of Gold Nanoparticles for Skin Care Creams

Gold nanoparticles (AuNPs) have now been used in skin care creams for several years, with marketed anti-aging, moisturizing, and regenerative properties. Information on the harmful effects of these nanoparticles is lacking, a concern for the use of AuNPs as cosmetic ingredients. Testing AuNPs without the medium of a cosmetic product is a typical method for obtaining this information, which is mainly dependent on their size, shape, surface charge, and dose. As these properties depend on the surrounding medium, nanoparticles should be characterized in a skin cream without extraction from the cream's complex medium as it may alter their physicochemical properties. The current study compares the sizes, morphology, and surface changes of produced dried AuNPs with a polyvinylpyrrolidone (PVP) stabilizer and AuNPs embedded in a cosmetic cream using a variety of characterization techniques (TEM, SEM, DLS, zeta potential, BET, UV-vis). The results show no observable differences in their shapes and sizes (spherical and irregular, average size of 28 nm) while their surface charges changed in the cream, indicating no major modification of their primary sizes, morphology, and the corresponding functional properties. They were present as individually dispersed nanoparticles and as groups or clusters of physically separated primary nanoparticles in both dry form and cream medium, showing suitable stability. Examination of AuNPs in a cosmetic cream is challenging due to the required conditions of various characterization techniques but necessary for obtaining a clear understanding of the AuNPs' properties in cosmetic products as the surrounding medium is a critical factor for determining their beneficial or harmful effects in cosmetic products.

Nanothin Conformal Coating with Poly(N-vinylpyrrolidone) and Tannic Acid (PVPON/TA) Preserves Murine and Human Pancreatic Islets Function

Beta cell replacement therapies can restore glycemic control to select individuals living with type 1 diabetes. However, the obligation of lifelong immunosuppression restricts cell therapies from replacing exogenous insulin administration. Encapsulation strategies can reduce the inherent adaptive immune response; however, few are successfully translated into clinical testing. Herein, we evaluated if the conformal coating of islets with poly(N-vinylpyrrolidone) (PVPON) and tannic acid (TA) (PVPON/TA) could preserve murine and human islet function while conferring islet allograft protection. In vitro function was evaluated using static glucose-stimulated insulin secretion, oxygen consumption rates, and islet membrane integrity. In vivo function was evaluated by transplanting human islets into diabetic immunodeficient B6.129S7-Rag1tm1Mom/J (Rag-/-) mice. The immunoprotective capacity of the PVPON/TA-coating was assessed by transplanting BALB/c islets into diabetic C57BL/6 mice. Graft function was evaluated by non-fasting blood glucose measurements and glucose tolerance testing. Both coated and non-coated murine and human islets exhibited indistinguishable in vitro potency. PVPON/TA-coated and control human islets were able to restore euglycemia post-transplant. The PVPON/TA-coating as monotherapy and adjuvant to systemic immunosuppression reduced intragraft inflammation and delayed murine allograft rejection. This study demonstrates that PVPON/TA-coated islets may be clinically relevant as they retain their in vitro and in vivo function while modulating post-transplant immune responses.

Nanomaterial Size and Surface Modification Mediate Disease Resistance Activation in Cucumber (Cucumis sativus)

Crop disease represents a serious and increasing threat to global food security. Lanthanum oxide nanomaterials (La₂O₃ NMs) with different sizes (10 and 20 nm) and surface modifications (citrate, polyvinylpyrrolidone [PVP], and poly(ethylene glycol)) were investigated for their control of the fungal pathogen Fusarium oxysporum (Schl.) f. sp cucumerinum Owen on six-week-old cucumber (Cucumis sativus) in soil. Seed treatment and foliar application of the La₂O₃ NMs at 20-200 mg/kg (mg/L) significantly suppressed cucumber wilt (decreased by 12.50-52.11%), although the disease control efficacy was concentration-, size-, and surface modification-dependent. The best pathogen control was achieved by foliar application of 200 mg/L PVP-coated La₂O₃ NMs (10 nm); disease severity was decreased by 67.6%, and fresh shoot biomass was increased by 49.9% as compared with pathogen-infected control. Importantly, disease control efficacy was 1.97- and 3.61-fold greater than that of La₂O₃ bulk particles and a commercial fungicide (Hymexazol), respectively. Additionally, La₂O₃ NMs application enhanced cucumber yield by 350-461%, increased fruit total amino acids by 295-344%, and improved fruit vitamin content by 65-169% as compared with infected controls. Transcriptomic and metabolomic analyses revealed that La₂O₃ NMs: (1) interacted with calmodulin, subsequently activating salicylic acid-dependent systemic acquired resistance; (2) increased the activity and expression of antioxidant and related genes, thereby alleviating pathogen-induced oxidative stress; and (3) directly inhibited in vivo pathogen growth. The findings highlight the significant potential of La₂O₃ NMs for suppressing plant disease in sustainable agriculture.

Myricetin Nanofibers Enhanced Water Solubility and Skin Penetration for Increasing Antioxidant and Photoprotective Activities

Excessive exposure to ultraviolet radiation (UV) can induce oxidative stress through the over-production of reactive oxygen species (ROS) on the skin. Myricetin (MYR), a natural flavonoid compound, significantly inhibited UV-induced keratinocyte damage; however, its bioavailability is limited by its poor water solubility and inefficient skin penetration ability, which subsequently influences its biological activity. The purpose of the study was to develop a myricetin nanofibers (MyNF) system of hydroxypropyl-β-cyclodextrin (HPBCD)/polyvinylpyrrolidone K120 (PVP)-loaded with MYR that would enhance the water solubility and skin penetration by changing the physicochemical characteristics of MYR, including reducing the particle size, increasing the specific surface area, and amorphous transformation. The results also revealed that the MyNF can reduce cytotoxicity in HaCaT keratinocytes when compared with MYR; additionally, MyNF had better antioxidant and photoprotective activity than raw MYR for the UVB-induced HaCaT keratinocytes damage model due to the MyNF increased water solubility and permeability. In conclusion, our results demonstrate that MyNF is a safe, photostable, and thermostable topical ingredient of antioxidant nanofibers to enhance the skin penetration of MYR and prevent UVB-induced skin damage.

Structural, Optical, and Electrical Investigations of Nd2O3-Doped PVA/PVP Polymeric Composites for Electronic and Optoelectronic Applications

In this present work, a PVA/PVP-blend polymer was doped with various concentrations of neodymium oxide (PB-Nd+3) composite films using the solution casting technique. X-ray diffraction (XRD) analysis was used to investigate the composite structure and proved the semi-crystallinity of the pure PVA/PVP polymeric sample. Furthermore, Fourier transform infrared (FT-IR) analysis, a chemical-structure tool, illustrated a significant interaction of PB-Nd+3 elements in the polymeric blends. The transmittance data reached 88% for the host PVA/PVP blend matrix, while the absorption increased with the high dopant quantities of PB-Nd+3. The absorption spectrum fitting (ASF) and Tauc’s models optically estimated the direct and indirect energy bandgaps, where the addition of PB-Nd+3 concentrations resulted in a drop in the energy bandgap values. A remarkably higher quantity of Urbach energy for the investigated composite films was observed with the increase in the PB-Nd+3 contents. Moreover, seven theoretical equations were utilized, in this current research, to indicate the correlation between the refractive index and the energy bandgap. The indirect bandgaps for the proposed composites were evaluated to be in the range of 5.6 eV to 4.82 eV; in addition, the direct energy gaps decreased from 6.09 eV to 5.83 eV as the dopant ratios increased. The nonlinear optical parameters were influenced by adding PB-Nd+3, which tended to increase the values. The PB-Nd+3 composite films enhanced the optical limiting effects and offered a cut-off laser in the visible region. The real and imaginary parts of the dielectric permittivity of the blend polymer embedded in PB-Nd+3 increased in the low-frequency region. The AC conductivity and nonlinear I-V characteristics were augmented with the doping level of PB-Nd+3 contents in the blended PVA/PVP polymer. The outstanding findings regarding the structural, electrical, optical, and dielectric performance of the proposed materials show that the new PB-Nd+3-doped PVA/PVP composite polymeric films are applicable in optoelectronics, cut-off lasers, and electrical devices.

Polymeric Gel Systems Cytotoxicity and Drug Release as Key Features for their Effective Application in Various Fields of Addressed Pharmaceuticals Delivery

Modified polymeric gels, including nanogels, which play not only the role of a bioinert matrix, but also perform regulatory, catalytic, and transport functions due to the active fragments introduced into them, can significantly advance the solution to the problem of targeted drug delivery in an organism. This will significantly reduce the toxicity of used pharmaceuticals and expand the range of their therapeutic, diagnostic, and medical application. This review presents a comparative description of gels based on synthetic and natural polymers intended for pharmaceutical-targeted drug delivery in the field of therapy of inflammatory and infectious diseases, dentistry, ophthalmology, oncology, dermatology, rheumatology, neurology, and the treatment of intestinal diseases. An analysis was made of most actual sources published for 2021–2022. The review is focused on the comparative characteristics of polymer gels in terms of their toxicity to cells and the release rate of drugs from nano-sized hydrogel systems, which are crucial initial features for their further possible application in mentioned areas of biomedicine. Different proposed mechanisms of drug release from gels depending on their structure, composition, and application are summarized and presented. The review may be useful for medical professionals, and pharmacologists dealing with the development of novel drug delivery vehicles.

Solid-State Preparation and Characterization of 2-Hydroxypropylcyclodextrins-Iodine Complexes as Stable Iodophors

The use of iodine as antiseptic poses some issues related to its low water solubility and high volatility. Stable solid iodine-containing formulations are highly advisable and currently limited to the povidone-iodine complex. In this study, complexes of molecular iodine with 2-hydroxypropyl α-, β- and γ-cyclodextrins were considered water-soluble iodophors and prepared in a solid state by using three different methods (liquid-assisted grinding, co-evaporation and sealed heating). The obtained solids were evaluated for their iodine content and stability over time in different conditions using a fully validated UV method. The assessment of the actual formation of an inclusion complex in a solid state was carried out by thermal analysis, and the presence of iodine was further confirmed by SEM/EDX and XPS analyses. High levels of iodine content (8.3–10.8%) were obtained with all the tested cyclodextrins, and some influence was exerted by the employed preparation method. Potential use as solid iodophors can be envisaged for these iodine complexes, among which those with 2-hydroxypropyl-α-cyclodextrin were found the most stable, regardless of the preparation technique. The three prepared cyclodextrin–iodine complexes proved effective as bactericides against S. epidermidis.

Electrosprayed Particles Loaded with Kartogenin as a Potential Osteochondral Repair Implant

The restoration of cartilage damage is a slow and not always successful process. Kartogenin (KGN) has significant potential in this space-it is able to induce the chondrogenic differentiation of stem cells and protect articular chondrocytes. In this work, a series of poly(lactic-co-glycolic acid) (PLGA)-based particles loaded with KGN were successfully electrosprayed. In this family of materials, PLGA was blended with a hydrophilic polymer (either polyethyleneglycol (PEG) or polyvinylpyrrolidone (PVP)) to control the release rate. Spherical particles with sizes in the range of 2.4-4.1 µm were fabricated. They were found to comprise amorphous solid dispersions, with high entrapment efficiencies of >93%. The various blends of polymers had a range of release profiles. The PLGA-KGN particles displayed the slowest release rate, and blending with PVP or PEG led to faster release profiles, with most systems giving a high burst release in the first 24 h. The range of release profiles observed offers the potential to provide a precisely tailored profile via preparing physical mixtures of the materials. The formulations are highly cytocompatible with primary human osteoblasts.

A comprehensive review on the COVID-19 vaccine and drug delivery applications of interpenetrating polymer networks

An interpenetrating polymer network (IPNs) is a concoction of two or more polymers (natural, synthetic, and/or a combination of both) in which at least one polymer is synthesized or crosslinked in the intimate presence of the other. These three-dimensional networked systems have gained prominence in a series of biomedical applications, especially in the last two decades. The last decades witnessed a surge in the meaningful applications of interpenetrating polymer networks, especially in drug delivery as simple IPN systems advanced and resulted in the formation of highly efficient microspheres, nanoparticles, nanogels, and hydrogels, intelligent enough to sense and respond to changes in external stimuli such as temperature, pH, and ionic strength. The structure of the polymers, crosslinking agents, crosslinking density, and polymerization method play an integral role in determining the properties and application of IPNs in drug delivery. This review article is a modest effort to highlight the importance and applications of different types of interpenetrating polymer networks for the sustained, site-specific drug delivery of various therapeutic formulations, as witnessed in scientific research literature over the past 22 years (2000-2022). A special section of the manuscript is devoted to studying the efficacy of network polymers in vaccine delivery and highlighting the future scope (if any) of incorporating the IPN system in COVID-related vaccine/drug delivery. Four key focus areas in this review article [1, 2].

Engineering of tetanus toxoid-loaded polymeric microneedle patches

This study is aimed to fabricate tetanus toxoid laden microneedle patches by using a polymeric blend comprising of polyvinyl pyrrolidone and sodium carboxymethyl cellulose as base materials and sorbitol as a plasticizer. The tetanus toxoid was mixed with polymeric blend and patches were prepared by using vacuum micromolding technique. Microneedle patches were evaluated for physical attributes such as uniformity of thickness, folding endurance, and swelling profile. Morphological features were assessed by optical and scanning electron microscopy. In vitro performance of fabricated patches was studied by using bicinchoninic acid assay (BCA). Insertion ability of microstructures was studied in vitro on model skin parafilm and in vivo in albino rat. In vivo immunogenic activity of the formulation was assessed by recording immunoglobulin G (IgG) levels, interferon gamma (IFN-γ) levels, and T-cell (CD4⁺ and CD8⁺) count following the application of dosage forms. Prepared patches, displaying sharp-tipped and smooth-surfaced microstructures, remained intact after 350 ± 36 foldings. Optimized microneedle patch formulation showed ~ 74% swelling and ~ 85.6% vaccine release within an hour. The microneedles successfully pierced parafilm. Histological examination of microneedle-treated rat skin confirmed disruption of epidermis without damaging the underneath vasculature. A significant increase in IgG levels (~ 21%), IFN-γ levels (~ 30%), CD4⁺ (~ 41.5%), and CD8⁺ (~ 48.5%) cell count was observed in tetanus vaccine-loaded microneedle patches treated albino rats with respect to control (untreated) group at 42nd day of immunization. In conclusion, tetanus toxoid-loaded microneedle patches can be considered as an efficient choice for transdermal delivery of vaccine without inducing pain commonly experienced with hypodermic needles.

Incorporating sodium deoxycholate endorsed the buccal administration of avanafil to heighten the bioavailability and duration of action

The highly effective phosphodiesterase type 5 inhibitor (avanafil; AVA) is routinely prescribed to treat erectile dysfunction. The drug has poor oral bioavailability and undergoes a significant first-pass metabolism. Therefore, altering AVA's solubility and choosing a different delivery method may boost its effectiveness. Nine different solid dispersion formulations utilizing polyvinylpyrrolidone (PVP) at three different ratios were prepared and characterized. The Box-Behnken design was employed to optimize AVA-buccal tablets. The pre-compression and post-compression characteristics of the tablets were assessed. The mucoadhesion strength of the optimized tablet was investigated using cow buccal mucosal tissue. In vivo performance of the optimized tablets was examined on human volunteers compared to the commercial tablets. PVP K90 at 2:1 drug to polymer ratio showed the highest solubilization capacity. The mucoadhesive polymer type and percentage and the mucopenetration enhancer percentage were significantly affect the mucoadhesion strength, tablet hardness, and the initial and cumulative AVA released from the prepared tablets. The optimized AVA-buccal tablet showed 4.96 folds increase in the mean residence time, higher plasma exposure, and an improvement in the relative bioavailability of AVA by 1076.27% compared with the commercial tablet. Therefore, a successful approach to deal with AVA first-pass metabolism and low bioavailability could be to employ buccal tablets containing a solubility-enhanced form of AVA.

Gold nanoparticles capped with L-glycine, L-cystine, and L-tyrosine: toxicity profiling and antioxidant potential

Biomolecules-based surface modifications of nanomaterials may yield effective and biocompatible nanoconjugates. This study was designed to evaluate gold nanoconjugates (AuNCs) for their altered antioxidant potential. Gold nanoparticles (AuNPs) and their conjugates gave SPR peaks in the ranges of 512-525 nm, with red or blueshift for different conjugates. Cys-AuNCs demonstrated enhanced (p < 0.05) and Gly-AuNCs (p > 0.05) displayed reduced DPPH activity. Gly-AuNCs and Tyr-AuNCs displayed enhanced ferric-reducing power and hydrogen peroxide scavenging activity, respectively. Cadmium-intoxicated mice were exposed to gold nanomaterials, and the level of various endogenous parameters, i.e., CAT, GST, SOD, GSH, and MTs, was evaluated. GSH and MTs in liver tissues of the cadmium-exposed group (G2) were elevated (p < 0.05), while other groups showed nonsignificance deviations than the control group. It is concluded that these nanoconjugates might provide effective nanomaterials for biomedical applications. However, more detailed studies for their safety profiling are needed before their practical applications.

Enhancing Intradermal Delivery of Lidocaine by Dissolving Microneedles: Comparison between Hyaluronic Acid and Poly(Vinyl Pyrrolidone) Backbone Polymers

Lidocaine hydrochloride (LiH), an amide-type local anesthetic agent, is commonly used in dermatological procedures. LiH is categorized as a BCS (biopharmaceutics classification system) class III group, which has high solubility and poor permeability. It should be noted that, in this context, LiH is intended as a local anesthetic, so the level of LiH in systemic circulation should be minimized to avoid toxicity and unwanted side effects such as hypotension and bradycardia. This study aimed to formulate and evaluate LiH-loaded dissolving microneedles (DMNs) with different polymer bases. Moreover, an in vitro permeation study using Franz diffusion cells and in vivo study were also performed. LiH-loaded DMNs were prepared using polymer groups of poly(vinyl pyrrolidone) (PVP-K30) and hyaluronic acid (HA). DMNs were created using the micro-molding method with centrifugation. The formulations selected based on the evaluation were F3 (HA 10%) and F5 (PVP-K30 25%). Based on the in vitro permeation study, the amount of drug permeated and deposited in the skin at F3 (HA 10%) was 247.1 ± 41.85 and 98.35 ± 12.86 μg, respectively. On the other hand, the amount of drug permeated and deposited in the skin at F5 (PVP-K30 25%) was 277.7 ± 55.88 and 59.46 ± 9.25 μg, respectively. Our in vivo drug-permeation study showed that only one rat from the PVP-K30 polymer group-with a concentration of 150.32 ng/mL-was detected on rat plasma. Therefore, LiH can be formulated into a DMN and can be deposited in the skin with a safe concentration of the drug permeating into systemic circulation.

Recent advancement of nanotherapeutics in accelerating chronic wound healing process for surgical wounds and diabetic ulcers

One of the greatest challenges faced during surgical procedures is closing and healing of wounds, which are essential in the field of orthopaedics, trauma, intensive care and general surgery. One of the main causes of death has been linked to chronic wounds, especially in immunosuppressant or diabetic patients. Due to increasing chronic wound fatality along with different pathologies associated with them, the current therapeutic methods are insufficient which has established an eminent need for innovative techniques. Traditionally, wound healing was carried out using formulations and ointments containing silver combined with different biomaterial, but was found to be toxic. Hence, the advent of alternative nanomaterial-based therapeutics for effective wound healing have come into existence. In this review, we have discussed an overview of wound infections such as different wound types, the wound healing process, dressing of wounds and conventional therapies. Furthermore, we have explored various nanotechnological advances made in wound healing therapy which include the use of promising candidates such as organic, inorganic, hybrid nanoparticles/nanocomposites and synthetic/natural polymer-based nanofibers. This review further highlights nanomaterial-based applications for regeneration of tissue in wound healing and can provide a base for researchers worldwide to contribute to this advancing medical area of wound therapy.

The Effect of the Particle Size Reduction on the Biorelevant Solubility and Dissolution of Poorly Soluble Drugs with Different Acid-Base Character

Particle size reduction is a commonly used process to improve the solubility and the dissolution of drug formulations. The solubility of a drug in the gastrointestinal tract is a crucial parameter, because it can greatly influence the bioavailability. This work provides a comprehensive investigation of the effect of the particle size, pH, biorelevant media and polymers (PVA and PVPK-25) on the solubility and dissolution of drug formulations using three model compounds with different acid-base characteristics (papaverine hydrochloride, furosemide and niflumic acid). It was demonstrated that micronization does not change the equilibrium solubility of a drug, but it results in a faster dissolution. In contrast, nanonization can improve the equilibrium solubility of a drug, but the selection of the appropriate excipient used for nanonization is essential, because out of the two used polymers, only the PVPK-25 had an increasing effect on the solubility. This phenomenon can be explained by the molecular structure of the excipients. Based on laser diffraction measurements, PVPK-25 could also inhibit the aggregation of the particles more effectively than PVA, but none of the polymers could hold the nanonized samples in the submicron range until the end of the measurements.

A starch-based, crosslinked blend film with seawater-specific dissolution characteristics

Existing biodegradable plastics may not be ideal replacements of petroleum-based single-use plastics owing to their slow biodegradation in seawater. To address this issue, a starch-based blend film with different disintegration/dissolution speeds in freshwater and seawater was prepared. Poly(acrylic acid) segments were grafted onto starch; a clear and homogenous film was prepared by blending the grafted starch with poly(vinyl pyrrolidone) (PVP) by solution casting. After drying, the grafted starch was crosslinked with PVP by hydrogen bonds, owing to which the water stability of the film is higher than that of unmodified starch films in fresh water. In seawater, the film dissolves quickly as a result of disruption of the hydrogen bond crosslinks. This technique balances degradability in marine environment and water resistance in everyday environment, provides an alternative route to mitigate marine plastic pollution and could be potentially useful for single-use applications in different fields such as packaging, healthcare, and agriculture.

PVP-microneedle array for drug delivery: mechanical insight, biodegradation, and recent advances

Microneedle arrays are micron-sized needles usually attached to a supporting base or patch facilitated drug delivery for systemic effects. Polyvinylpyrrolidone (PVP) is a lactam polymer containing an internal amide linkage. Because of its versatility and biocompatibility, it has been widely utilized to treat several skin, bone and eye problems. Due to its specific and unique properties, the researchers realize its utility as a polymer of tremendous potential. PVP-based dissolvable microneedles have widely been utilized as a carrier for delivering DNAs, proteins, vitamins, and several biological macromolecules transdermally. However, it does not get biodegraded into the body. Therefore, the presence of its fragments in the body post-treatment needs proper justification. The adequate justification for the fate of the fragment's end products in the body will allow even better utilization of PVP. This review analyses and illustrates various experimental findings to highlight the most recent advancements and applications of PVP microneedles in drug delivery systems and cosmetology and the potential for PVP microneedles in treating dermal and systemic disorders. This review presents the expected mode of PVP biodegradation in aqueous and soil environments as a waste material, its inertness, biocompatibility, and the importance of PVP as a fabricating material, pharmaceutical uses, and non-toxic profile.

Sequential Reagent Release from a Layered Tablet for Multistep Diagnostic Assays

Diagnostic assays are commonly performed in multiple steps, where reagents are added at specific times and concentrations into a reaction chamber. The reagents require storage, preparation, and addition in the correct sequence and amount. These steps rely on trained technicians and instrumentation to perform each task. The reliance on such resources hinders the use of these diagnostic assays by lay users. We developed a tablet that can sequentially introduce prequantified lyophilized diagnostic reagents at specific time points for a multistep assay. We designed the tablet to have multiple layers using cellulose-grade polymers, such as microcrystalline cellulose and hydroxypropyl cellulose. Our formulation allows each layer to dissolve at a controlled rate to introduce reagents into the solution sequentially. The release rate is controlled by modulating the compression force or chemical formulation of the layer. Controlling the reagent release time is important because different assays have specific times when reagents need to be added. As proof of concept, we demonstrated two different assays with our tablet system. Our tablet detected nucleic acid target (tpp47 gene from Treponema pallidum) and nitrite ions in an aqueous sample without user intervention. Our multilayer tablets can simplify multistep assay processes.

Solvent modulation in peptide sub-microfibers obtained by solution blow spinning

Peptides possess high chemical diversity at the amino acid sequence level, which further translates into versatile functions. Peptides with self-assembling properties can be processed into diverse formats giving rise to bio-based materials. Peptide-based spun fibers are an interesting format due to high surface-area and versatility, though the field is still in its infancy due to the challenges in applying the synthetic polymer spinning processes to protein fibers to peptides. In this work we show the use of solution blow-spinning to produce peptide fibers. Peptide fiber formation was assisted by the polymer poly (vinyl pyrrolidone) (PVP) in two solvent conditions. Peptide miscibility and further self-assembling propensity in the solvents played a major role in fiber formation. When employing acetic acid as solvent, peptide fibers (0.5 μm) are formed around PVP fibers (0.75 μm), whereas in isopropanol only one type of fibers are formed, consisting of mixed peptide and PVP (1 μm). This report highlights solvent modulation as a mean to obtain different peptide sub-microfibers via a single injection nozzle in solution blow spinning. We anticipate this strategy to be applied to other small peptides with self-assembly propensity to obtain multi-functional proteinaceous fibers.

Quercetin-Loaded Mesoporous Silica Nanoparticle-Based Lyophilized Tablets for Enhanced Physicochemical Features and Dissolution Rate: Formulation, Optimization, and In Vitro Evaluation

Mesoporous silica nanoparticles (MSNPs) have been proposed as a potential approach for stabilizing the amorphous state of poorly water-soluble actives. This study aimed to improve the physiochemical characteristics of poorly water-soluble quercetin (QT) through a novel lyophilized formulation. Various parameters, including solvent polarity, QT-carrier mass ratio, and adsorption time, were studied to improve the loading of QT into MSNPs. The optimized loaded MSNPs were formulated into lyophilized tablets through a freeze-drying process using hydrophilic polyvinylpyrrolidone (PVP-K30) as a polymeric stabilizer and water-soluble sucrose as a cryoprotectant. The effect of PVP-K30 and sucrose on the particle size, disintegration time, friability, and time required to release 90% of QT were studied using 3² full factorial design. The optimized formula was characterized using different evaluating techniques; for instance, differential scanning calorimetry, X-ray diffractometry, Fourier transform infrared spectroscopy, drug content, moisture content, and saturation solubility. The analysis proved that QT was consistently kept in the nanosize range with a narrow size distribution. The loaded silica nanoparticles and the optimized formulation are in an amorphous state devoid of any chemical interaction with the silica matrix or the lyophilization excipients. The optimized formula also featured low friability (less than 1%), fast disintegration (< 30 s), and a pronounced enhancement in saturation solubility and dissolution rate. Briefly, we established that the lyophilized MSNPs-based tablet would be a potential strategy for improving the rate of dissolution and, ultimately, the bioavailability of the poorly water-soluble QT.

Buccal Thin Films as Potent Permeation Enhancers for Cytisine Transbuccal Delivery

Cytisine (CYT) is a powerful anti-smoking compound which could greatly benefit from transbuccal delivery because of both its unfavorable pharmacokinetics after oral administration and its intrinsic ability to permeate the buccal mucosa. This work aims to design CYT-loaded buccal thin films suitable for transbuccal drug delivery due to its capability of promoting the interaction between CYT and the buccal membrane. The solvent casting method was employed to prepare several thin films combining various excipients such as matrixing polymers, mucoadhesion agents, plasticizers and other compounds as humectants and sweeteners, component ratios and solvents. A total of 36 compositions was prepared and four of them emerged as the most promising in terms of aspect and flexibility. They all demonstrated homogeneity, thinness, low swelling degree, and controlled drug release according to the Power Law and Peppas-Sahlin mathematical models. Mainly, they proved able to interact with the ex vivo porcine buccal mucosa producing mucoadhesive effects, and act as potent permeation enhancers. In particular, Film B emerged as suitable as it produced a 10.6-fold Kp enhancement and a great Js value (52.33 μg/cm²·h^-1), even when compared to highly concentrated CYT solutions.

Formulation of water-soluble Buddleja globosa Hope extracts and characterization of their antimicrobial properties against Pseudomonas aeruginosa

Buddleja globosa Hope (BG) extracts are traditionally used to treat skin and gastric ulcers due to their healing properties. Non-aqueous solvents such as ethanol and DMSO are usually used to extract naturally occurring compounds. However, the cytotoxicity of these solvents and the low water solubility of the extracted compounds can hinder their biomedical applications. To overcome the limited solubility of the BG extracts, we aimed to enhance the solubility by processing a standardized hydroalcoholic extract (BG-126) through spray drying (SD), with and without two solubility enhancers. Spray-dried BG (BG-SD) extracts and spray-dried BG extracts plus polyvinylpyrrolidone (BG-SD PVP) and Soluplus® (BG-SD SP) were developed starting from BG-126 (containing 53% ethanol). These four formulations were characterized by total phenolic content, water solubility at 25°C and 37°C, and antimicrobial properties against Pseudomonas aeruginosa. All the SD formulations presented a solubility that allowed them to reach maximum concentrations of 1,024 μg/ml catechin for BG-SD and 2,048 μg/ml catechin for BG-SD PVP and BG-SD SP for antimicrobial testing. BG-SD showed the highest antimicrobial potency with a minimum inhibitory concentration (MIC) of 512 μg/ml catechin, followed by BG-126 with a MIC of 1,024 μg/ml catechin and SP. BG-126 was also shown to inhibit biofilm formation, as well as the excipients PVP and SP. The spray-dried BG (BG-SD) extract represents a promising natural active component with enhanced antimicrobial properties against P. aeruginosa for further research and the development of novel phytopharmaceuticals.

Fabrication and characterization of electrospun nanofibers using biocompatible polymers for the sustained release of venlafaxine

Recently, drug-controlled release nanotechnology has gained special attention in biomedicine. This work focuses on developing novel electrospun polymeric nanofibers (NFs) for buccal delivery of VEN to avoid the hepatic metabolism and enzymatic degradation in the GIT and develop an effective control of drug release. The optimized NFs were obtained by blending polylactic acid (PLA), and poly (ɛ-caprolactone) (PCL) fixed at a ratio of 1:1. It was characterized for morphology, drug-loading, FTIR, XRD, DSC, and in vitro drug release. Ex vivo permeability of the blend NFs was assessed using chicken pouch mucosa compared to VEN suspension, followed by histopathological examination. Further, the cytotoxic effect in three different cell lines using WST-1 assay. SEM morphologies refer to defect-free uniform NFs of PLA, PCL, and PLA/PCL mats. These fibers had a diameter ranging from 200 to 500 nm. The physico-thermal characterization of NFs depicted that the drug was successfully loaded and in an amorphous state in the PLA/PCL NFs. In vitro release of NFs substantiated a bi-phasic profile with an initial burst release of about 30% in the initial 0.5 h and a prolonged cumulative release pattern that reached 80% over 96 h following a non-Fickian diffusion mechanism. Ex vivo permeation emphasizes the major enhancement of the sustained drug release and the noticeable decrease in the permeability of the drug from NFs. Cytotoxicity data found that IC₅₀ of VEN alone was 217.55 μg/mL, then VEN-NFs recorded an IC₅₀ value of 250.62 μg/mL, and plain NFs showed the lowest toxicity and IC₅₀ 440.48 μg/mL in oral epithelial cells (OEC). Histopathology and cell toxicity studies demonstrated the preserved mucosal architecture and the preclinical safety. The developed PLA/PCL NFs can be promising drug carriers to introduce a step-change in improved psychiatric treatment healthcare.

How to Improve Solubility and Dissolution of Irbesartan by Fabricating Ternary Solid Dispersions: Optimization and In-Vitro Characterization

The purpose of this study is to improve the solubility and dissolution of a poorly soluble drug, Irbesartan, using solid dispersion techniques. For that purpose, different polymers such as Soluplus^®, Kollidon^® VA 64, Kolliphor^® P 407, and Polyinylpyrrolidone (PVP-K30) were used as carriers at different concentrations to prepare solid dispersion formulations through the solvent evaporation method. In order to prepare binary dispersion formulations, Soluplus^® and Kollidon^® VA 64 were used at drug: polymer ratios of 1:1, 1:2, 1:3, and 1:4 (w/w). Saturation solubility of the drug in the presence of used carriers was performed to investigate the quantitative increase in solubility. Dissolution studies were performed to explore the drug release behavior from the prepared dispersions. Additionally, the characterization of the prepared formulations was carried out by performing DSC, SEM, XRD, and FTIR studies. The results revealed that among binary systems, K₄ formulation (Drug: Kollidon^® VA 64 at ratio of 1:4 w/w) exhibited optimal performance in terms of increased solubility, drug release, and other investigated parameters. Furthermore, ternary dispersion formulations of the optimized binary formulation were prepared with two more polymers, Kolliphor^® P 407 and Polyvinylpyrrolidone (PVP-K30), at (Drug: Kollidon^® VA 64:ternary polymer) ratios of 1:4:1, 1:4:2, and 1:4:3 (w/w). The results showed that KPVP (TD₃) exhibited the highest increase in solubility, as well as dissolution rate, among ternary solid dispersion formulations. Results of solubility enhancement by ternary solid dispersion formulations were also supported by FTIR, DSC, XRD, and SEM analysis. Conclusively, it was found that the ternary solid dispersion-based systems were more effective compared to the binary combinations in improving solubility as well as dissolution of a poorly soluble drug (Irbesartan).

Virucidal PVP-Copper Salt Composites against Coronavirus Produced by Electrospinning and Electrospraying

Electrospinning technology was used to produced polyvinylpyrrolidone (PVP)-copper salt composites with structural differences, and their virucidal activity against coronavirus was investigated. The solutions were prepared with 20, 13.3, 10, and 6.6% w/v PVP containing 3, 1.0, 0.6, and 0.2% w/v Cu (II), respectively. The rheological properties and electrical conductivity contributing to the formation of the morphologies of the composite materials were observed by scanning electron microscopy (SEM). SEM images revealed the formation of electrospun PVP-copper salt ultrafine composite fibers (0.80 ± 0.35 µm) and electrosprayed PVP-copper salt composite microparticles (1.50 ± 0.70 µm). Energy-dispersive X-ray spectroscopy (EDS) evidenced the incorporation of copper into the produced composite materials. IR spectra confirmed the chemical composition and showed an interaction of Cu (II) ions with oxygen in the PVP resonant ring. Virucidal composite fibers inactivated 99.999% of coronavirus within 5 min of contact time, with moderate cytotoxicity to L929 cells, whereas the virucidal composite microparticles presented with a virucidal efficiency of 99.999% within 1440 min of exposure, with low cytotoxicity to L929 cells (mouse fibroblast). This produced virucidal composite materials have the potential to be applied in respirators, personal protective equipment, self-cleaning surfaces, and to fabric coat personal protective equipment against SARS-CoV-2, viral outbreaks, or pandemics.

Analysis of the Influence of Both the Average Molecular Weight and the Content of Crosslinking Agent on Physicochemical Properties of PVP-Based Hydrogels Developed as Innovative Dressings

Hydrogels belong to the group of polymers with a three-dimensional crosslinked structure, and their crosslinking density strongly affects their physicochemical properties. Here, we verified the impact of both the average molecular weight of crosslinking agents used during the photopolymerization of hydrogels and that of their content on selected properties of these materials. First, PVP-based hydrogels modified with Aloe vera juice and L-ascorbic acid were prepared using UV radiation. Next, their surface morphology was characterized via optical scanning electron microscopy, whereas their chemical structure was investigated by FT-IR spectroscopy. Moreover, we verified the tendency of the hydrogels to degrade in selected physiological liquids, as well as their tensile strength, percentage of elongation, and swelling capability. We found that the more crosslinking agent in the hydrogel matrix, the higher its tensile strength and the less elongation. The hydrogels showed the highest stability during incubation in SBF and 2% hemoglobin solution. A sharp decrease in the pH of distilled water observed during the incubation of the hydrogels was probably due to the release of Aloe vera juice from the hydrogel matrices. This was additionally confirmed by the decrease in the intensity of the absorption band derived from the polysaccharides included in this additive and by the decrease in the swelling ratio after 48 h. Importantly, all hydrogels demonstrated swelling properties, and it was proven that the higher content of the crosslinking agent in hydrogels, the lower their swelling ability.

Effect of Hydrophilic Polymers on the Release Rate and Pharmacokinetics of Acyclovir Tablets Obtained by Wet Granulation: In Vitro and In Vivo Assays

This study aims to evaluate the feasibility of producing acyclovir-containing modified release matrix tablets by a wet granulation method based on the type and concentration of two pharmaceutical-grade hydrophilic matrix polymers (i.e., hydroxypropyl methylcellulose (HPMC), carbomers, and their combinations) commonly used in biomedical applications. The mechanical properties of the tablets and in vitro and in vivo performance were studied. The physicochemical properties of the raw materials and corresponding physical mixtures were characterized by differential scanning calorimetry, showing that the hydrophilic polymers did not influence the physicochemical properties of the drug. The wet granulation process improved the flow and compression properties of the obtained granules. This method enabled the preparation of the matrix tablets of acyclovir with appropriate mechanical properties concerning hardness and friability. The drug release kinetics was governed by the type and concentration of the hydrophilic polymers composing the matrices. The study has proven that HPMC-composed tablets were superior in modified drug release properties compared to carbomer- and HPMC/carbomer-based tablets. Mathematical analysis of the release profiles, determined in a medium adjusted to pH 1.2 followed by pH 7.4, revealed that the drug released from the hydrophilic tablets followed non-Fickian first-order kinetics. An optimal HPMC-based formulation submitted to accelerated stability studies (40 °C, 75% RH) was stable for three months. A complete cross-over bioavailability study of the selected acyclovir-loaded sustained release tablets and marketed immediate-release tablets were compared in six healthy male volunteers. The extent of drug absorption from the sustained release tablets was significantly greater than that from immediate-release pills, which may improve the drug's antiviral properties attributed to the lower elimination rate and enhanced acyclovir half-life.

Exploiting Polymeric Films as a Multipurpose Drug Delivery System: a Review

Polymeric films are drug delivery systems that maintain contact with the delivery tissue and sustain a controlled release of therapeutic molecules. These systems allow a longer time of drug contact with the target site in the case of topical treatments and allow the controlled administration of drugs. They can be manufactured by various methods such as solvent casting, hot melt extrusion, electrospinning, and 3D bioprinting. Furthermore, they can employ various polymers, for example PVP, PVA, cellulose derivatives, chitosan, gelling gum, pectin, and alginate. Its versatility is also applicable to different routes of administration, as it can be administered to the skin, oral mucosa, vaginal canal, and eyeballs. All these factors allow numerous combinations to obtain a better treatment. This review focuses on exploring some possible ways to develop them and some particularities and advantages/disadvantages in each case. It also aims to show the versatility of these systems and the advantages and disadvantages in each case, as they bring the opportunity to develop different medicines to facilitate therapies for the most diverse purposes .

High performance {Nb5TaX12}@PVP (X = Cl, Br) cluster-based nanocomposites coatings for solar glazing applications

The development of highly ultraviolet (UV) and near-infrared (NIR) absorbent transparent coatings is an important enabling technology and area of research for environmental sustainability and energy conservation. Different amounts of K₄[{Nb₅TaXⁱ ₁₂}X^a ₆] cluster compounds (X = Cl, Br) dispersed into polyvinylpyrrolidone matrices were prepared by a simple, nontoxic and low-cost wet chemical method. The resulting solutions were used to fabricate visibly transparent, highly UV and NIR absorbent coatings by drop casting. The properties of the solution and films were investigated by complementary techniques (optical absorption, electrospray ionization mass spectrometry and Raman spectroscopy). The UV and NIR absorption of such samples strongly depended on the concentration, dispersion and oxidation state of the [{Nb₅TaXⁱ ₁₂}X^a ₆] nanocluster-based units. By varying and controlling these parameters, a remarkable improvement of the figures of merit T_L/T_E and S_NIR for solar-glazing applications was achieved compared to the previous results on nanocomposite coatings based on metal atom clusters.

Optimization of Oligomer Chitosan/Polyvinylpyrrolidone Coating for Enhancing Antibacterial, Hemostatic Effects and Biocompatibility of Nanofibrous Wound Dressing

A synergistic multilayer membrane design is necessary to satisfy a multitude of requirements of an ideal wound dressing. In this study, trilayer dressings with asymmetric wettability, composed of electrospun polycaprolactone (PCL) base membranes coated with oligomer chitosan (COS) in various concentrations of polyvinylpyrrolidone (PVP), are fabricated for wound dressing application. The membranes are expected to synergize the hygroscopic, antibacterial, hemostatic, and biocompatible properties of PCL and COS. The wound dressing was coated by spraying the solution of 3% COS and 6% PVP on the PCL base membrane (PVP6–3) three times, which shows good interaction with biological subjects, including bacterial strains and blood components. PVP6–3 samples confirm the diameter of inhibition zones of 20.0 ± 2.5 and 17.9 ± 2.5 mm against Pseudomonas aeruginosa and Staphylococcus aureus, respectively. The membrane induces hemostasis with a blood clotting index of 74% after 5 min of contact. In the mice model, wounds treated with PVP6–3 closed 95% of the area after 10 days. Histological study determines the progression of skin regeneration with the construction of granulation tissue, new vascular systems, and hair follicles. Furthermore, the newly-growth skin shares structural resemblances to that of native tissue. This study suggests a simple approach to a multi-purpose wound dressing for clinical treatment.