Emerging pollutants in the environment: present and future challenges in biomonitoring, ecological risks and bioremediation

Determination of the Toxic Effects of Heavy Metals on the Morpho-Anatomical Responses of the Leaf of Typha latifolia as a Biomonitoring Tool

Typha latifolia leaves act as sensitive barometers for trace heavy metal pollution, as revealed by their pronounced anatomical responses in a constructed wetland. Monthly water samples and Typha latifolia leaf tissue were collected over three consecutive months in 2018 from the Burgas Lake wetlands (Taoura), northeast Algeria. While physical and chemical parameters improved after treatment, atomic absorption spectrometry (Perkin Elmer A Analyst 800 AAS) detected persistent trace levels of cadmium, chromium, and lead in both the treated water and leaf tissue, highlighting the need for continued phytoremediation efforts. Microscopic examination of leaf tissue exposed to these metals revealed distinct anatomical adaptations, including shrunken vascular bundles, altered cell shapes, and stomatal closure. These findings underscore Typha latifolia's effectiveness in accumulating heavy metals and its potential as a highly sensitive biomonitor for persistent pollution in lake ecosystems.

Degree of human activity exert differentiated influence on conventional and emerging pollutants in drinking water source

Anthropogenic pollution poses a significant threat to drinking water sources worldwide. Previous studies have focused on the occurrence of pollutants in drinking water sources, but the impact of human activities on different types of pollutants in drinking water sources is still unclear. In this study, we chose the upper reaches of the Dongjiang River (URDR) as a case study to investigate the distribution characteristics of conventional pollutants, pesticides, and antibiotics along the gradient of human intervention. Our findings reveal that human activities can effect both conventional pollutants and emerging pollutants in the URDR to varying degrees. The escalation of human activities correlates with a rising trend in conventional pollutants, such as nitrogen (N) and phosphorus (P). Notably, only C1 (terrestrial humus) in dissolved organic matter (DOM) exhibits this increasing pattern. Pesticide and antibiotic concentrations are highest in areas with moderate and high levels of human activity, respectively, and the degree of eutrophication of drinking water closely follows the gradient of human activity. Our results also indicate that most pesticides pose a significant risk in the URDR, particularly pyrethroid pesticides (PYRs). Out of all antibiotics, only Norfloxacin (NFX) and Penicillin G (PENG) are classified as high-risk, with NFX exhibiting significant variation across different degrees of human activity. C1 and TP were the most important factors affecting the distribution of organophosphorus (OPPs) and PYRs, respectively. In conclusion, varying degrees of human activity exert differentiated influences on conventional and emerging pollutants in drinking water sources.

LED-driven photo-Fenton process for micropollutant removal by nanostructured magnetite anchored in mesoporous silica

The presence of organic micropollutants in water bodies represents a threat to living organisms and ecosystems due to their toxicological effects and recalcitrance in conventional wastewater treatments. In this context, the application of heterogeneous photo-Fenton based on magnetite nanoparticles supported on mesoporous silica (SBA15) is proposed to carry out the non-specific degradation of the model compounds ibuprofen, carbamazepine, hormones, bisphenol A and the dye ProcionRed®. The operating conditions (i.e., pH, catalyst load and hydrogen peroxide concentration) were optimized by Response Surface Methodology (RSM). The paramagnetic properties of the nanocatalysts allowed their repeated use in sequential batch operations with catalyst losses below 1%. The feasibility of the process was demonstrated as removal rates above 90% after twelve accomplished after twelve consecutive cycles. In addition, the contributions of different reactive oxygen species, mainly •OH, were analyzed together with the formation of by-products, achieving total mineralization values of 15% on average.

A systematic review on the current situation of emerging pollutants in Mexico: A perspective on policies, regulation, detection, and elimination in water and wastewater

Emerging pollutants (EPs) emerged as a group of new compounds whose presence in the environment has been widely detected in Mexico. In this country, different concentrations of pharmaceutical compounds, pesticides, dyes, and microplastics have been reported, which vary depending on the region and the analyzed matrix (i.e., wastewater, surface water, groundwater). The evidence of the EPs' presence focuses on the detection of them, but there is a gap in information regarding is biomonitoring and their effects in health in Mexico. The presence of these pollutants in the country associated with lack of proper regulations in the discharge and disposal of EPs. Therefore, this review aims to provide a comprehensive view of the current environmental status, policies, and frameworks regarding Mexico's situation. The review also highlights the lack of information about biomonitoring since EPs are present in water even after their treatment, leading to a critical situation, which is high exposure to humans and animals. Although, technologies to efficiently eliminate EPs are available, their application has been reported only at a laboratory scale thus far. Here, an overview of health and environmental impacts and a summary of the research works reported in Mexico from 2014 to 2023 were presented. This review concludes with a concrete point of view and perspective on the status of the EPs' research in Mexico as an alert for government entities about the necessity of measures to control the EPs disposal and treatment.

Review on heavy metal contaminants in freshwater fish in South India: current situation and future perspective

The primary natural resource we use in our daily lives for a variety of activities is freshwater for drinking and various developmental goals. Furthermore, the pace of human population increase worldwide is rising rapidly and has a great impact on the Earth's natural resources. Natural water quality has diminished owing to various anthropogenic activities. Water is crucial to the life cycle. On the other hand, chemical and agricultural industries pollute heavy metals. Acute and chronic diseases caused by heavy metals, such as slow metabolism and damage to the gills and epithelial layer of fish species, are divided into two categories. Pollutants can also harm liver tissues and result in ulceration as well as diseases such as fin rot, tail rot, and gill disease. The most prevalent heavy metals are As, Cr, Pb, and Hg, which are systemic toxicants that affect human health. These metals are categorized as carcinogens by the US Environmental Protection Agency and the worldwide agency for cancer research because they cause organ damage even at low exposure levels. The focus of the current study is to review various freshwater sources of heavy metal pollution.

A mini review of recent progress in the removal of emerging contaminants from pharmaceutical waste using various adsorbents

The presence of emerging contaminants (ECs) originating from pharmaceutical waste in water, wastewater, and marine ecosystems at various geographical locations has been clearly publicised. This review paper presents an overview of current monitoring data on the occurrences and distributions of ECs in coastal ecosystem, tap water, surface water, ground water, treated sewage effluents, and other sources. Technological advancements for EC removal are also presented, which include physical, chemical, biological, and hybrid treatments. Adsorption remains the most effective method to remove ECs from water bodies. Various types of adsorbents, such as activated carbons, biochars, nanoadsorbents (carbon nanotubes and graphene), ordered mesoporous carbons, molecular imprinting polymers, clays, zeolites, and metal-organic frameworks have been extensively used for removing ECs from water sources and wastewater. Extensive findings on adsorptive performances, process efficiency, reusability properties, and other related information are thoroughly discussed in this mini review.

Application of high-throughput sequencing technologies and analytical tools for pathogen detection in urban water systems: Progress and future perspectives

The ubiquitous presence of pathogenic microorganisms, such as viruses, bacteria, fungi, and protozoa, in urban water systems poses a significant risk to public health. The emergence of infectious waterborne diseases mediated by urban water systems has become one of the leading global causes of mortality. However, the detection and monitoring of these pathogenic microorganisms have been limited by the complexity and diversity in the environmental samples. Conventional methods were restricted by long assay time, high benchmarks of identification, and narrow application sceneries. Novel technologies, such as high-throughput sequencing technologies, enable potentially full-spectrum detection of trace pathogenic microorganisms in complex environmental matrices. This review discusses the current state of high-throughput sequencing technologies for identifying pathogenic microorganisms in urban water systems with a concise summary. Furthermore, future perspectives in pathogen research emphasize the need for detection methods with high accuracy and sensitivity, the establishment of precise detection standards and procedures, and the significance of bioinformatics software and platforms. We have compiled a list of pathogens analysis software/platforms/databases that boast robust engines and high accuracy for preference. We highlight the significance of analyses by combining targeted and non-targeted sequencing technologies, short and long reads technologies, sequencing technologies, and bioinformatic tools in pursuing upgraded biosafety in urban water systems.

Endocrine disrupting chemicals in wastewater treatment plants in Kenya, East Africa: Concentrations, removal efficiency, mass loading rates and ecological impacts

This study investigated the levels, mass loadings, removal efficiency, and associated ecotoxicological risks of selected endocrine disrupting chemicals (EDCs), namely, dibutylphthalate (DBP), diethylhexylphthalate (DEHP), dimethylphthalate (DMP), linuron (LNR) and progesterone (PGT) in wastewater, sludge, and untreated dry biosolid (UDBS) samples from twelve wastewater treatment plants (WWTPs) in nine major towns in Kenya. Analysis was done using high-performance liquid chromatography coupled with triple quadrupole mass spectrometry (LC-MS/MS). All the wastewater influents had quantifiable levels of EDCs with DBP being the most abundant (37.49%) with a range of 4.33 ± 0.63 to 19.68 ± 1.24 μg L-1. DEHP was the most abundant in sludge and accounted for 48.2% ranging between 278.67 and 9243.49 ng g-1 dry weight (dw). In the UDBS samples, DEHP was also the most abundant (40%) of the total EDCs detected with levels ranging from 78.77 to 3938.54 ng g-1 dw. The average removal efficiency per pollutant was as follows: DMP (98.7%) > DEHP (91.7%) > PGT (83.4%) > DBP (77.9%) > LNR (72.2%) which can be attributed to sorption onto the biosolid, biological degradation, photolysis, and phytoremediation. The pH was negatively correlated to the EDC concentrations while total dissolved solids (TDS), chemical oxygen demand (COD), biochemical oxygen demand (BOD5), and electrical conductivity (EC) were positively correlated. The mass loadings were as high as 373.33 g day-1 of DBP in the treatment plants located in densely populated cities. DEHP and PGT had their Risk Quotients (RQs) > 1, posing a high risk to biota. DMP, DBP, and LNR posed medium risks as their RQ values were between 0.1 and 1. EDCs are therefore loaded to environmental compartments through either the effluent that loads these pollutants into the receiving aquatic ecosystem or through the UDBS, which are used as fertilizers in agricultural farmlands causing potential toxicological risks to aquatic and terrestrial life.

Analysis of drug of abuse compounds using passive sampling and ultrahigh-liquid chromatography coupled to mass spectrometry

The present study proposes the monitoring of compounds of drugs of abuse through the use of passive samplers in water systems. Initially, four positive ion compounds of interest were determined according to national surveys, and then composite sampling and passive sampling were implemented using continuous-flow passive samplers containing two types of sorbents, the Empore disk and Gerstel Twister. Two study sites were established at the beginning and at the end of the middle Bogotá River basin. After 4 days, the sorbents were removed so that they could be desorbed and analyzed using UHPLC-MS in the laboratory. For the composite samples, the results were below the first calibration curve point (FCCP) of the chromatographic method, and for passive sampling, peaks of benzoylecgonine (BE) (21427.3 pg mL-1), methamphetamine (MET) (67101.5 pg mL-1), MDMA (ecstasy) (225844.8 pg mL-1) and 2-ethylidene-1,5-dimethyl-3,3-diphenylpyrrolidine (EDDP) (15908.4 pg mL-1) were found. Therefore, passive sampling could be suggested as an alternative to composite sampling for the monitoring of compounds.

Insights in Pharmaceutical Pollution: The Prospective Role of eDNA Metabarcoding

Environmental pollution is a growing threat to natural ecosystems and one of the world's most pressing concerns. The increasing worldwide use of pharmaceuticals has elevated their status as significant emerging contaminants. Pharmaceuticals enter aquatic environments through multiple pathways related to anthropogenic activity. Their high consumption, insufficient waste treatment, and the incapacity of organisms to completely metabolize them contribute to their accumulation in aquatic environments, posing a threat to all life forms. Various analytical methods have been used to quantify pharmaceuticals. Biotechnology advancements based on next-generation sequencing (NGS) techniques, like eDNA metabarcoding, have enabled the development of new methods for assessing and monitoring the ecotoxicological effects of pharmaceuticals. eDNA metabarcoding is a valuable biomonitoring tool for pharmaceutical pollution because it (a) provides an efficient method to assess and predict pollution status, (b) identifies pollution sources, (c) tracks changes in pharmaceutical pollution levels over time, (d) assesses the ecological impact of pharmaceutical pollution, (e) helps prioritize cleanup and mitigation efforts, and (f) offers insights into the diversity and composition of microbial and other bioindicator communities. This review highlights the issue of aquatic pharmaceutical pollution while emphasizing the importance of using modern NGS-based biomonitoring actions to assess its environmental effects more consistently and effectively.

Application of CRISPR/Cas9-based genome editing in ecotoxicology

Chemicals are widely used and released into the environment, and their degradation, accumulation, migration, and transformation processes in the environment can pose a threat to the ecosystem. The advancement in analytical methods with high-throughput screening of biomolecules has revolutionized the way toxicologists used to explore the effects of chemicals on organisms. CRISPR/Cas is a newly developed tool, widely used in the exploration of basic science and biologically engineered products given its high efficiency and low cost. For example, it can edit target genes efficiently, and save loss of the crop yield caused by environmental pollution as well as gain a better understanding of the toxicity mechanisms from various chemicals. This review briefly introduces the development history of CRISPR/Cas and summarizes the current application of CRISPR/Cas in ecotoxicology, including its application on improving crop yield and drug resistance towards agricultural pollution, antibiotic pollution and other threats. The benefits by applying the CRISPR/Cas9 system in conventional toxicity mechanism studies are fully demonstrated here together with its foreseeable expansions in other area of ecotoxicology. Finally, the prospects and disadvantages of CRISPR/Cas system in the field of ecotoxicology are also discussed.

Exploring the role of microbes for the management of persistent organic pollutants

Persistent organic pollutants (POPs) are chemicals which have been persisting in the environment for many years due to their longer half-lives. POPs have gained attention over the last few decades due to the unsustainable management of chemicals which led to their widespread and massive contamination of biota from different strata and environments. Due to the widespread distribution, bio-accumulation and toxic behavior, POPs have become a risk for organisms and environment. Therefore, a focus is required to eliminate these chemicals from the environment or transform into non-toxic forms. Among the available techniques for the removal of POPs, most of them are inefficient or incur high operational costs. As an alternative to this, microbial bioremediation of POPs such as pesticides, polycyclic aromatic hydrocarbons, polychlorinated biphenyls, pharmaceuticals and personal care products is much more efficient and cost-effective. Additionally, bacteria play a vital role in the biotransformation and solubilization of POPs, which reduces their toxicity. This review specifies the Stockholm Convention that evaluates the risk profile for the management of existing as well as emerging POPs. The sources, types and persistence of POPs along with the comparison of conventional elimination and bioremediation methods of POPs are discussed comprehensively. This study demonstrates the existing bioremediation techniques of POPs and summaries the potential of microbes which serve as enhanced, cost-effective, and eco-friendly approach for POPs elimination.

A review on triclosan in wastewater: Mechanism of action, resistance phenomenon, environmental risks, and sustainable removal techniques

Triclosan, belonging to the bisphenols, is a known antiseptic broad-spectrum biocide. It has a very wide range of applications, both in health care and in the household. Triclosan enters the environment, both water bodies and soil, because of its high prevalence and the ability to accumulation. Excessive use of antimicrobial formulations may cause the generation of resistance among microorganisms. Reduced susceptibility to triclosan is observed more frequently and in an expanded group of microorganisms and is conditioned by a number of different mechanisms occurring on the molecular level. Conventional wastewater treatment processes are not always able to provide a reliable barrier to triclosan. Therefore, additional advanced treatment technologies are being considered in areas, where a triclosan contamination problem has been identified. Removal of triclosan from wastewater is carried out using different biological and chemical techniques; however, it should be pointed out that physico-chemical methods often generate toxic by-products. Toxicity of triclosan and its degradation products, bacterial resistance to this compound, and evident problems with triclosan elimination from wastewater are currently the main problems faced by companies creating products containing triclosan. PRACTITIONER POINTS: Triclosan is an emerging pollutant in the environment because of its ability to accumulation and high prevalence. Reduced susceptibility to triclosan is being observed more frequently. Conventional wastewater treatment processes are not always able to provide a reliable barrier to triclosan. Additional advanced treatment technologies should be implemented to remove triclosan from wastewater.

Emerging environmental health risks associated with the land application of biosolids: a scoping review

BACKGROUND

Over 40% of the six million dry metric tons of sewage sludge, often referred to as biosolids, produced annually in the United States is land applied. Biosolids serve as a sink for emerging pollutants which can be toxic and persist in the environment, yet their fate after land application and their impacts on human health have not been well studied. These gaps in our understanding are exacerbated by the absence of systematic monitoring programs and defined standards for human health protection.

METHODS

The purpose of this paper is to call critical attention to the knowledge gaps that currently exist regarding emerging pollutants in biosolids and to underscore the need for evidence-based testing standards and regulatory frameworks for human health protection when biosolids are land applied. A scoping review methodology was used to identify research conducted within the last decade, current regulatory standards, and government publications regarding emerging pollutants in land applied biosolids.

RESULTS

Current research indicates that persistent organic compounds, or emerging pollutants, found in pharmaceuticals and personal care products, microplastics, and per- and polyfluoroalkyl substances (PFAS) have the potential to contaminate ground and surface water, and the uptake of these substances from soil amended by the land application of biosolids can result in contamination of food sources. Advanced technologies to remove these contaminants from wastewater treatment plant influent, effluent, and biosolids destined for land application along with tools to detect and quantify emerging pollutants are critical for human health protection.

CONCLUSIONS

To address these current risks, there needs to be a significant investment in ongoing research and infrastructure support for advancements in wastewater treatment; expanded manufacture and use of sustainable products; increased public communication of the risks associated with overuse of pharmaceuticals and plastics; and development and implementation of regulations that are protective of health and the environment.

Ketoprofen as an emerging contaminant: occurrence, ecotoxicity and (bio)removal

Ketoprofen, a bicyclic non-steroidal anti-inflammatory drug commonly used in human and veterinary medicine, has recently been cited as an environmental contaminant that raises concerns for ecological well-being. It poses a growing threat due to its racemic mixture, enantiomers, and transformation products, which have ecotoxicological effects on various organisms, including invertebrates, vertebrates, plants, and microorganisms. Furthermore, ketoprofen is bioaccumulated and biomagnified throughout the food chain, threatening the ecosystem function. Surprisingly, despite these concerns, ketoprofen is not currently considered a priority substance. While targeted eco-pharmacovigilance for ketoprofen has been proposed, data on ketoprofen as a pharmaceutical contaminant are limited and incomplete. This review aims to provide a comprehensive summary of the most recent findings (from 2017 to March 2023) regarding the global distribution of ketoprofen in the environment, its ecotoxicity towards aquatic animals and plants, and available removal methods. Special emphasis is placed on understanding how ketoprofen affects microorganisms that play a pivotal role in Earth's ecosystems. The review broadly covers various approaches to ketoprofen biodegradation, including whole-cell fungal and bacterial systems as well as enzyme biocatalysts. Additionally, it explores the potential of adsorption by algae and phytoremediation for removing ketoprofen. This review will be of interest to a wide range of readers, including ecologists, microbiologists, policymakers, and those concerned about pharmaceutical pollution.

Microbial degradation and transformation of PPCPs in aquatic environment: A review

The Pharmaceuticals and Personal Care Products (PPCPs) presence at harmful levels has been identified in aquatic ecosystems all over the world. Currently, PPCPs are more common in aquatic regions and have been discovered to be extremely harmful to aquatic creatures. Waste-water treatment facilities are the primary cause of PPCPs pollution in aquatic systems due to their limited treatment as well as the following the release of PPCPs. The degree of PPCPs elimination is primarily determined by the method applied for the remediation. It must be addressed in an eco-friendly manner in order to significantly improve the environmental quality or, at the very least, to prevent the spread as well as effects of toxic pollutants. However, when compared to other methods, environmentally friendly strategies (biological methods) are less expensive and require less energy. Most biological methods under aerobic conditions have been shown to degrade PPCPs effectively. Furthermore, the scientific literature indicates that with the exception of a few extremely hydrophobic substances, biological degradation by microbes is the primary process for the majority of PPCPs compounds. Hence, this review discusses about the optimistic role of microbe concerned in the degradation or transformation of PPCPs into non/less toxic form in the polluted environment. Accordingly, more number of microbial strains has been implicated in the biodegradation/transformation of harmful PPCPs through a process termed as bioremediation and their limitations.

Effective bioremediation of clarithromycin and diclofenac in wastewater by microbes and Arundo donax L

Bioremediation of pharmaceuticals has gained large research efforts, but there is still a need to improve the performance of bioremediation systems by selecting effective organisms. In this study, we characterized the capability to remove clarithromycin (CLA) and diclofenac (DCF) by the bacterium Streptomyces rochei, and the fungi Phanerochaete chrysosporium and Trametes versicolor. The macrolide antibiotic CLA and the non-steroid anti-inflammatory DCF were selected because these are two of the most frequently detected drugs in water bodies. Growth and content of the PhCs and a DCF metabolite (MET) by the energy crop Arundo donax L. were also evaluated under hydroponic conditions. The removal rate (RR) by S. rochei increased from 24 to 40% at 10 and 100 µg CLA L-1, respectively, averaged over incubation times. At 144 h, the RR by P. chrysosporium was 84%, while by T. versicolor was 70 and 45% at 10 and 100 CLA µg L-1. The RR by S. rochei did not exceed 30% at 1 mg DCF L-1 and reached 60% at 10 mg DCF L-1, whereas approached 95% and 63% by P. chrysosporium and T. versicolor, respectively, at both doses. Root biomass and length of A. donax were strongly affected at 100 µg CLA L-1. CLA concentration in roots and shoots increased with the increase of the dose and translocation factor (TF) was about 1. DCF severely affected both shoot fresh weight and root length at the highest dose and concentration in roots and shoots increased with the increase of the dose. DCF concentrations were 16-19 times higher in roots than in shoots, and TF was about 0.1. MET was detected only in roots and its proportion over the parent compound decreased with the increase of the DCF dose. This study highlights the potential contribution of A. donax and the tested microbial inoculants for improving the effectiveness of bioremediation systems for CLA and DCF removal.

Microbial biochemical pathways of arsenic biotransformation and their application for bioremediation

Arsenic is a ubiquitous toxic metalloid, the concentration of which is beyond WHO safe drinking water standards in many areas of the world, owing to many natural and anthropogenic activities. Long-term exposure to arsenic proves lethal for plants, humans, animals, and even microbial communities in the environment. Various sustainable strategies have been developed to mitigate the harmful effects of arsenic which include several chemical and physical methods, however, bioremediation has proved to be an eco-friendly and inexpensive technique with promising results. Many microbes and plant species are known for arsenic biotransformation and detoxification. Arsenic bioremediation involves different pathways such as uptake, accumulation, reduction, oxidation, methylation, and demethylation. Each of these pathways has a certain set of genes and proteins to carry out the mechanism of arsenic biotransformation. Based on these mechanisms, various studies have been conducted for arsenic detoxification and removal. Genes specific for these pathways have also been cloned in several microorganisms to enhance arsenic bioremediation. This review discusses different biochemical pathways and the associated genes which play important roles in arsenic redox reactions, resistance, methylation/demethylation, and accumulation. Based on these mechanisms, new methods can be developed for effective arsenic bioremediation.

DNA-Binding Protein Dps Protects Escherichia coli Cells against Multiple Stresses during Desiccation

Gradual dehydration is one of the frequent lethal yet poorly understood stresses that bacterial cells constantly face in the environment when their micro ecotopes dry out, as well as in industrial processes. Bacteria successfully survive extreme desiccation through complex rearrangements at the structural, physiological, and molecular levels, in which proteins are involved. The DNA-binding protein Dps has previously been shown to protect bacterial cells from many adverse effects. In our work, using engineered genetic models of E. coli to produce bacterial cells with overproduction of Dps protein, the protective function of Dps protein under multiple desiccation stresses was demonstrated for the first time. It was shown that the titer of viable cells after rehydration in the experimental variants with Dps protein overexpression was 1.5-8.5 times higher. Scanning electron microscopy was used to show a change in cell morphology upon rehydration. It was also proved that immobilization in the extracellular matrix, which is greater when the Dps protein is overexpressed, helps the cells survive. Transmission electron microscopy revealed disruption of the crystal structure of DNA-Dps crystals in E. coli cells that underwent desiccation stress and subsequent watering. Coarse-grained molecular dynamics simulations showed the protective function of Dps in DNA-Dps co-crystals during desiccation. The data obtained are important for improving biotechnological processes in which bacterial cells undergo desiccation.

Human Health Risk Assessment to the Consumption of Medicinal Plants with Melliferous Potential from the Romanian South-Eastern Region

This study presents the impact on human health by consuming medicinal herbs with high melliferous potential (HMPs) from botanical areas with different pollution levels. First, the bioaccumulation of the plants' parts has been determined. The study assessed the potential health risks associated with the ingestion of various mineral species (macroelements-K, Ca, Mg, Na; microelements-Fe, Mn, Cu, Zn, and one trace element Cd) from three types of HMPs (Sambucus nigra (SnL), Hypericum perforatum (Hp), and Tilia tomentosa (Tt)). The average concentrations of these elements were not similar even in the same type of HMPs. Nevertheless, all samples contained detectable levels of the studied elements. The average concentrations of the studied elements were very low (significantly lower than the legal limit set by the WHO). The study's findings indicated that the potential health risks associated with ingesting the elements in HMPs were within acceptable limits for children and adults. The hazard quotient (HQ) for Fe, Mn, Cu, Zn, and Cd and the hazard index (HI) for the minerals from HMPs were significantly lower than the acceptable limit (HQ and HI = 1). Similarly, the carcinogenic risk for chemical substances (Riskccs) were lower than or close to the acceptable limit (1 × 10^-4).

Novel nontarget LC-HRMS-based approaches for evaluation of drinking water treatment

A conventional evaluation methodology for drinking water pollution focuses on analysing hundreds of compounds, usually by liquid chromatography-tandem mass spectrometry. High-resolution mass spectrometry allows comprehensive evaluation of all detected signals (compounds) based on their elemental composition, intensity, and numbers. We combined target analysis of 192 emerging micropollutants with nontarget (NT) full-scan/MS/MS methods to describe the impact of treatment steps in detail and assess drinking water treatment efficiency without compound identification. The removal efficiency based on target analytes ranged from - 143 to 97%, depending on the treatment section, technologies, and season. The same effect calculated for all signals detected in raw water by the NT method ranged between 19 and 65%. Ozonation increased the removal of micropollutants from the raw water but simultaneously caused the formation of new compounds. Moreover, ozonation byproducts showed higher persistence than products formed during other types of treatment. We evaluated chlorinated and brominated organics detected by specific isotopic patterns within the developed workflow. These compounds indicated anthropogenic raw water pollution but also potential treatment byproducts. We could match some of these compounds with libraries available in the software. We can conclude that passive sampling combined with nontargeted analysis shows to be a promising approach for water treatment control, especially for long-term monitoring of changes in technology lines because passive sampling dramatically reduces the number of samples and provides time-weighted average information for 2 to 4 weeks.

Microbe, climate change and marine environment: Linking trends and research hotspots

Microbes, or microorganisms, have been the foundation of the biosphere for over 3 billion years and have played an essential role in shaping our planet. The available knowledge on the topic of microbes associated with climate change has the potential to reshape upcoming research trends globally. As climate change impacts the ocean or marine ecosystem, the responses of these "unseen life" will heavily influence the achievement of a sustainable evolutionary environment. The present study aims to identify microbial-related research under changing climate within the marine environment through the mapping of visualized graphs of the available literature. We used scientometric methods to retrieve documents from the Web of Science platform in the Core Collection (WOSCC) database, analyzing a total of 2767 documents based on scientometric indicators. Our findings show that this research area is growing exponentially, with the most influential keywords being "microbial diversity," "bacteria," and "ocean acidification," and the most cited being "microorganism" and "diversity." The identification of influential clusters in the field of marine science provides insight into the hot spots and frontiers of research in this area. Prominent clusters include "coral microbiome," "hypoxic zone," "novel Thermoplasmatota clade," "marine dinoflagellate bloom," and "human health." Analyzing emerging trends and transformative changes in this field can inform the creation of special issues or research topics in selected journals, thus increasing visibility and engagement among the scientific community.

Bioaccumulation and biomagnifications of toxic metals in tissues of loggerhead turtles (Caretta caretta) from the Mediterranean Sea coast, Egypt

Heavy metal concentrations in the different tissues of marine turtles are presented; the most frequently monitored elements are mercury, cadmium, and lead. Concentrations of Hg, Cd, Pb, and As in different organs and tissues (liver, kidney, muscle tissue, fat tissue, and blood) of loggerhead turtle Caretta caretta from the southeastern Mediterranean Sea were determined using Atomic Absorption Spectrophotometer, Shimadzu and mercury vapor unite (MVu 1A) for Hg measurements. The highest levels of cadmium and arsenic were found in the kidney (Cd: 61.17 µg g^-1; As: 0.051 µg g^-1 dry weight). For lead, the highest level was found in muscle tissue (35.80 µg g^-1). Mercury tended to be higher in the liver than in other tissues and organs (0.253 µg g^-1 dry weight) which showed a higher accumulation of this element. Fat tissue generally displays the lowest trace element burdens. The concentrations of As remained low in all the considered tissues, possibly the result of low trophic levels in sea turtles. In contrast, the diet of loggerhead turtles would result in significant exposure to Pb. This is the first study into metal accumulation in the tissues of a loggerhead turtle from the Egyptian Mediterranean coastline.

First emerging pollutants profile in groundwater of the volcanic active island of El Hierro (Canary Islands)

Emerging pollutants (EPs) are substances present in wastewater that have not been studied, previously, leading to ambiguity in regulations for their presence in water resources. Territories that are highly dependent on groundwater resources are at a high risk of suffering the consequences of EP contamination due to their dependence on good quality groundwater for agriculture, drinking, and other uses. A relevant example is El Hierro (Canary Islands), which was declared a biosphere reserve by the UNESCO in 2000 and is almost completely powered by renewable energies. Using high performance liquid chromatography-mass spectrometry, the concentrations of 70 EPs were assessed at 19 sampling points on El Hierro. The results indicated that no pesticides were present in groundwater; however, varied concentration levels of ultraviolet (UV) filters, UV stabilizers/blockers and pharmaceutically active compounds (PhACs) were found, with La Frontera being the most contaminated municipality. With regard to the different installation types, piezometers and wells were the ones showing the highest concentrations for most EPs. Interestingly, the depth of sampling correlated positively with EP concentration, and four different clusters virtually dividing the island into two areas could be identified based on the presence of each EP. More studies should be performed to ascertain why a few of the EPs showed considerably high concentrations at different depths. The results obtained highlight the need to, not only implement remediation measures once EPs have reached the soil and aquifers, but also to avoid their incorporation into the water cycle via homes, animal husbandry, agriculture, industry, and wastewater treatment plants (WWTPs).

Antidepressant pharmaceuticals in aquatic systems, individual-level ecotoxicological effects: growth, survival and behavior

The growing consumption of antidepressant pharmaceuticals has resulted in their widespread occurrence in the environment, particularly in waterways with a typical concentration range from ng L^-1 to μg L^-1. An increasing number of studies have confirmed the ecotoxic potency of antidepressants, not only at high concentrations but also at environmentally relevant levels. The present review covers literature from the last decade on the individual-level ecotoxicological effects of the most commonly used antidepressants, including their impact on behavior, growth, and survival. We focus on the relationship between antidepressants physico-chemical properties and dynamics in the environment. Furthermore, we discuss the advantages of considering behavioral changes as sensitive endpoints in ecotoxicology, as well as some current methodological shortcomings in the field, including low standardization, reproducibility and context-dependency.

Natural and Natural-Based Polymers: Recent Developments in Management of Emerging Pollutants

Anthropogenic activities lead to the issue of new classes of pollutants in the environment that are not currently monitored in environmental studies. This category of pollutants (known as emerging contaminants) includes a very wide range of target substances, such as pharmaceuticals, plant protection products, personal care products, dyes, toxins, microplastics and many other industrially important intermediaries. Together with an increasing demand for clean water (both for agricultural necessities and for the increasing population consumption), the need for the removal of emerging pollutants, simultaneously with the current "green chemistry" approach, opens the door for the industrial application of natural polymers in the area of environmental protection. Recent developments in this area are presented in this paper, as well as the application of these particular natural materials for the removal of other contaminants of interest (such as radioisotopes and nanoparticles). The current knowledge regarding the processes' kinetics is briefly presented, as well as the future development perspectives in this area.

Advancements in nanomaterial-based aptasensors for the detection of emerging organic pollutants in environmental and biological samples

The combination of nanomaterials (NMs) and aptamers into aptasensors enables highly specific and sensitive detection of diverse pollutants. The great potential of aptasensors is recognized for the detection of diverse emerging organic pollutants (EOPs) in different environmental and biological matrices. In addition to high sensitivity and selectivity, NM-based aptasensors have many other advantages such as portability, miniaturization, facile use, and affordability. This work showcases the recent advances achieved in the design and fabrication of NM-based aptasensors for monitoring EOPs (e.g., hormones, phenolic contaminants, pesticides, and pharmaceuticals). On the basis of their sensing mechanisms, the covered aptasensing systems are classified as electrochemical, colorimetric, PEC, fluorescence, SERS, and ECL. Special attention has been paid to the fabrication processes, analytical achievements, and sensing mechanisms of NM-based aptasensors. Further, the practical utility of aptasensing approaches has also been assessed based on their basic performance metrics (e.g., detection limits, sensing ranges, and response times).

Selective adsorption of anionic and cationic dyes on mesoporous UiO-66 synthesized using a template-free sonochemistry method: kinetic, isotherm and thermodynamic studies

In this study, template-free mesoporous UiO-66(U) has been successfully synthesized in shortened time by sonochemical methods and provided energy savings. The synthesized mesoporous UiO-66(U) demonstrated irregular morphology particle around 43.5 nm according to the SEM image. The N2 adsorption-desorption isotherm indicated an irregular, 8.88 nm pore width mesoporous structure. Ultrasonic irradiation waves greatly altered mesoporous materials. A mechanism for mesoporous UiO-66(U) formation has been proposed based on the present findings. Sonochemical-solvent heat saves 97% more energy than solvothermal. Mesoporous UiO-66(U) outperformed solvothermal-synthesized UiO-66(S) in adsorption. These studies exhibited that mesopores in UiO-66 promote dye molecule mass transfer (MO, CR, and MB). According to kinetics and adsorption isotherms, the pseudo-second-order kinetic and Langmuir isotherm models matched experimental results. Thermodynamic studies demonstrated that dye adsorption is spontaneous and exothermically governed by entropy, not enthalpy. Mesoporous UiO-66(U) also showed good anionic dye selectivity in mixed dye adsorption. Mesoporous UiO-66(U) may be regenerated four times while maintaining strong adsorption capability.

Toxicity risks associated with trace metals call for conservation of threatened fish species in heavily sediment-laden Yellow River

Trace metals and metalloids in aquatic ecosystems may lead to adverse effects on the survival of fish, especially in the sensitive life stages of vulnerable species. It is still unknown whether threatened fish species in the heavily sediment-laden Yellow River are exposed to toxicity risks associated with multiple trace metals. Herein, we analyzed the concentrations of trace metals in aquatic environmental media and fish tissues across the Yellow River mainstream and assessed the level of metal toxicity to threatened fish. Significantly different concentrations of trace metals in fish tissues were measured between at least two categories among near-threatened, vulnerable, endangered, and critically endangered fish. No metal showed a higher concentration in demersal fish than in pelagic fish. Substantially low metal toxicity was observed for the gill of Rhinogobio nasutus (near-threatened) in the upper reaches, as well as for the gill and liver of Silurus lanzhouensis (endangered) in the middle reaches. High contents of suspended sediment in water and high metal concentrations in sediment and suspended matter could influence the survival and reproduction of fish, especially those already with threatened status.

Unravelling joint cytotoxicity of ibuprofen and oxytetracycline on Chlamydomonas reinhardtii using a programmed cell death-related biomarkers panel

Pharmaceutical active compounds (PhACs) are emerging contaminants that pose a growing concern due to their ubiquitous presence and harmful impact on aquatic ecosystems. Among PhACs, the anti-inflammatory ibuprofen (IBU) and the antibiotic oxytetracycline (OTC) are two of the most used compounds whose presence has been reported in different aquatic environments worldwide. However, there is still scarce information about the cellular and molecular alterations provoked by IBU and OTC on aquatic photosynthetic microorganisms as microalgae, even more if we refer to their potential combined toxicity. To test the cyto- and genotoxicity provoked by IBU, OTC and their binary combination on Chlamydomonas reinhardtii, a flow cytometric panel was performed after 24 h of single and co-exposure to both contaminants. Assayed parameters were cell vitality, metabolic activity, intracellular ROS levels, and other programmed cell death (PCD)-related biomarkers as cytoplasmic and mitochondrial membrane potentials and caspase-like and endonuclease activities. In addition, a nuclear DNA fragmentation analysis by comet assay was carried out. For most of the parameters analysed (vitality, metabolic activity, cytoplasmic and mitochondrial membrane potentials, and DNA fragmentation) the most severe damages were observed in the cultures exposed to the binary mixture (IBU+OTC), showing a joint cyto- and genotoxicity effect. Both PhACs and their mixture caused a remarkable decrease in cell proliferation and metabolic activity and markedly increased intracellular ROS levels, parallel to a noticeable depolarization of cytoplasmic and mitochondrial membranes. Moreover, a strong increase in both caspase and endonuclease activities as well as a PCD-related loss of nuclear DNA integrity was observed in all treatments. Results analysis showed that the PhACs caused cell death on this non-target organism, involving mitochondrial membrane depolarization, enhanced ROS production and activation of PCD process. Thus, PCD should be an applicable toxicological target for unraveling the harmful effects of co-exposure to PhACs in aquatic organisms as microalgae.

Entropy and Fractal Techniques for Monitoring Fish Behaviour and Welfare in Aquacultural Precision Fish Farming-A Review

In a non-linear system, such as a biological system, the change of the output (e.g., behaviour) is not proportional to the change of the input (e.g., exposure to stressors). In addition, biological systems also change over time, i.e., they are dynamic. Non-linear dynamical analyses of biological systems have revealed hidden structures and patterns of behaviour that are not discernible by classical methods. Entropy analyses can quantify their degree of predictability and the directionality of individual interactions, while fractal dimension (FD) analyses can expose patterns of behaviour within apparently random ones. The incorporation of these techniques into the architecture of precision fish farming (PFF) and intelligent aquaculture (IA) is becoming increasingly necessary to understand and predict the evolution of the status of farmed fish. This review summarizes recent works on the application of entropy and FD techniques to selected individual and collective fish behaviours influenced by the number of fish, tagging, pain, preying/feed search, fear/anxiety (and its modulation) and positive emotional contagion (the social contagion of positive emotions). Furthermore, it presents an investigation of collective and individual interactions in shoals, an exposure of the dynamics of inter-individual relationships and hierarchies, and the identification of individuals in groups. While most of the works have been carried out using model species, we believe that they have clear applications in PFF. The review ends by describing some of the major challenges in the field, two of which are, unsurprisingly, the acquisition of high-quality, reliable raw data and the construction of large, reliable databases of non-linear behavioural data for different species and farming conditions.

Recent Progress of Surface-Enhanced Raman Spectroscopy for Bacteria Detection

There are various pathogenic bacteria in the surrounding living environment, which not only pose a great threat to human health but also bring huge losses to economic development. Conventional methods for bacteria detection are usually time-consuming, complicated and labor-intensive, and cannot meet the growing demands for on-site and rapid analyses. Sensitive, rapid and effective methods for pathogenic bacteria detection are necessary for environmental monitoring, food safety and infectious bacteria diagnosis. Recently, benefiting from its advantages of rapidity and high sensitivity, surface-enhanced Raman spectroscopy (SERS) has attracted significant attention in the field of bacteria detection and identification as well as drug susceptibility testing. Here, we comprehensively reviewed the latest advances in SERS technology in the field of bacteria analysis. Firstly, the mechanism of SERS detection and the fabrication of the SERS substrate were briefly introduced. Secondly, the label-free SERS applied for the identification of bacteria species was summarized in detail. Thirdly, various SERS tags for the high-sensitivity detection of bacteria were also discussed. Moreover, we emphasized the application prospects of microfluidic SERS chips in antimicrobial susceptibility testing (AST). In the end, we gave an outlook on the future development and trends of SERS in point-of-care diagnoses of bacterial infections.

Environmental risk caused by drug waste in the city of Rio de Janeiro, Brazil, during the SARS-Cov19 pandemic

Abstract The relationship between the distribution of medicines used in the Pandemic by SARS-COV-19 in the municipality of Rio de Janeiro and the estimated level of environmental risk caused by their residues was evaluated. The amount of medicines distributed by primary health care (PHC) units between 2019 and 2021 were collected. The risk quotient (RQ) corresponded to the ratio between the estimated predictive environmental concentration (PECest) obtained by the consumption and excretion of each drug and its non-effective predictive concentration (PNEC). Between 2019 and 2020, the PECest of azithromycin (AZI) and ivermectin (IVE) increased between 2019 and 2020, with a decrease in 2021 probably due to shortages. Dexchlorpheniramine (DEX) and fluoxetine (FLU) fell, returning to growth in 2021. While the PECest of diazepam (DIA) increased over these 3 years, ethinylestradiol (EE2) decreased possibly due to the prioritization of PHC in the treatment of COVID-19. The largest QR were from FLU, EE2 and AZI. The consumption pattern of these drugs did not reflect their environmental risk because the most consumed ones have low toxicity. It is worth noting that some data may be underestimated due to the incentive given during the pandemic to the consumption of certain groups of drugs.

Environmental risk caused by drug waste in the city of Rio de Janeiro, Brazil, during the SARS-Cov19 pandemic

The relationship between the distribution of medicines used in the Pandemic by SARS-COV-19 in the municipality of Rio de Janeiro and the estimated level of environmental risk caused by their residues was evaluated. The amount of medicines distributed by primary health care (PHC) units between 2019 and 2021 were collected. The risk quotient (RQ) corresponded to the ratio between the estimated predictive environmental concentration (PECest) obtained by the consumption and excretion of each drug and its non-effective predictive concentration (PNEC). Between 2019 and 2020, the PECest of azithromycin (AZI) and ivermectin (IVE) increased between 2019 and 2020, with a decrease in 2021 probably due to shortages. Dexchlorpheniramine (DEX) and fluoxetine (FLU) fell, returning to growth in 2021. While the PECest of diazepam (DIA) increased over these 3 years, ethinylestradiol (EE2) decreased possibly due to the prioritization of PHC in the treatment of COVID-19. The largest QR were from FLU, EE2 and AZI. The consumption pattern of these drugs did not reflect their environmental risk because the most consumed ones have low toxicity. It is worth noting that some data may be underestimated due to the incentive given during the pandemic to the consumption of certain groups of drugs.

Adding knowledge to the design of safer hydrophobically modified poly(acrylic) acids: an ecotoxicological approach

The architecture of hydrophobically modified polymers can be tailored to produce variants with different levels of functionality. This allows industry to apply rational design methods for the development of more environmentally friendly materials. In the present work, the ecotoxicity of six variants of hydrophobically modified poly(acrylic) acids (HMPAA), obtained by changing the crosslinked conformation, insertion position, and length of the hydrophobic groups, was assessed for the (i) bioluminescence production of Aliivibrio fischeri; (ii) population growth rate of Raphidocelis subcapitata and Chlorella vulgaris; (iii) mortality of Brachionus calyciflorus; (iv) feeding inhibition, somatic growth rate, reproduction, and mortality of Daphnia magna; and (iv) mortality and somatic growth rate of Pelophylax perezi tadpoles. The concentrations causing 50% and 20% of effects (L(E)C50 and 20, respectively) ranged from 9.64 up to > 2000 mg·L-1 for all six HMPAA and species. The bacterium A. fischeri and tadpoles of P. perezi were the most sensitive and most tolerant organisms to the six tested HMPAA, respectively. The computed 5% hazard concentrations (computed on the basis of L(E)C50 s) showed that HMPAA1 (13.0 mg·L-1) and HMPAA2 (26.1 mg·L-1) were the most toxic variants, while HMPAA6 (233 mg·L-1) the least one. These results suggest HMPAA6 (with low crosslink percentage modified by the addition of long and short hydrophobic groups at the surface) to be the most environmentally friendly variant and should be preferentially considered to be used in consumer products, compared to the other five studied variants.

Acetaminophen degradation in aqueous solution by the UV-LED-EC/Cl2 process

In this study, electrochemically generated free chlorine (EC/Cl2) was activated by UV irradiation with a light emitting diode (LED) lamp at 275 nm to degrade acetaminophen (AAP, 2 μM) in aqueous solution. The potential at a RuO2-IrO2/Ti plate anode was set at 1.5 V vs. the Ag/AgCl electrode. Chlorine was in situ generated in the presence of Cl at the anode and then it was transformed into various active species such as OH and reactive chlorine species (RCS) under UV-LED irradiation. The degradation of AAP was investigated using batch tests, evaluating the influence of different experimental conditions such as NaCl concentration, phosphate buffer saline concentration, irradiation time and solution pH, keeping constant the UV-LED power and temperature. Results show that AAP could be completely degraded by the hybrid process with a high mineralization ratio (73%), and the degradation process followed a pseudo-first-order kinetics. The value of the Electric Energy per Order (EEO) = 1.272 kWh m3 order?, which is lower than the energy consumption of some other UV-based processes for AAP degradation. Adding 1 mM HCO3 ions slightly decreased the rate of AAP degradation. Luminescent bacteria experiment revealed that the acute toxicity of the reacted solution could be greatly reduced and the ecological risk was effectively abated. The scavenging assay shows that RCS plays a key role in the AAP degradation. The intermediate products were identified, and possible degradation routes were proposed. The system can advantageously replace conventional UV mercury lamp based ones in the degradation of microorganic pollutants.

Elucidating the Effects of the Lipids Regulators Fibrates and Statins on the Health Status of Finfish Species: A Review

The most documented fibrates are gemfibrozil, clofibrate and bezafibrate, while for statins, the majority of the published literature focuses on atorvastatin and simvastatin. The present work reviews previously published research concerning the effects of these hypocholesterolaemic pharmaceuticals on fish, with a particular focus on commercially important species, commonly produced by the European aquaculture industry, specifically in recirculated aquaculture systems (RAS). Overall, results suggest that both acute and chronic exposures to lipid-lowering compounds may have adverse effects on fish, disrupting their capacity to excrete exogenous substances, as well as both lipid metabolism and homeostasis, causing severe ontogenetic and endocrinological abnormalities, leading to hampered reproductive success (e.g., gametogenesis, fecundity), and skeletal or muscular malformations, having serious repercussions on fish health and welfare. Nonetheless, the available literature focusing on the effects of statins or fibrates on commonly farmed fish is still limited, and further research is required to understand the implications of this matter on aquaculture production, global food security and, ultimately, human health.

Strategies for microbial bioremediation of environmental pollutants from industrial wastewater: A sustainable approach

Heavy metals are hazardous and bring about critical exposure risks to humans and animals, even at low concentrations. An assortment of approaches has been attempted to remove the water contaminants and keep up with water quality, for that microbial bioremediation is a promising way to mitigate these pollutants from the contaminated water. The flexibility of microorganisms to eliminate a toxic pollutant creates bioremediation an innovation that can be applied in various water and soil conditions. This review insight into the sources, occurrence of toxic heavy metals, and their hazardous human exposure risk. In this review, significant attention to microbial bioremediation for pollutant mitigation from various ecological lattices has been addressed. Mechanism of microbial bioremediation in the aspect of factors affecting, the role of microbes and interaction between the microbes and pollutants are the focal topics of this review. In addition, emerging strategies and technologies developed in the field of genetically engineered micro-organism and micro-organism-aided nanotechnology has shown up as powerful bioremediation tool with critical possibilities to eliminate water pollutants.

Ecological disturbances and abundance of anthropogenic pollutants in the aquatic ecosystem: Critical review of impact assessment on the aquatic animals

Anthropogenic toxins are discharged into the environment and distributed through a variety of environmental matrices. Trace contaminant detection and analysis has advanced dramatically in recent decades, necessitating further specialized technique development. These pollutants can be mobile and persistent in small amounts in the environment, and ecological receptors will interact with it. Despite the fact that few researches have been undertaken on invertebrate exposure, accumulation, and biological implications, it is apparent that a wide range of pollutants can accumulate in the tissues of aquatic insects, earthworms, amphipod crustaceans, and mollusks. Due to long-term stability during long-distance transit, a number of chemical and microbiological agents that were not previously deemed pollutants have been found in various environmental compartments. The uptake of such pollutants by the aquatic organism is done through the process of bioaccumulation when dangerous compounds accumulate in living beings while biomagnification is the process of a pollutant becoming more hazardous as it moves up the trophic chain. Organic and metal pollution harms animals of every species studied so far, from bacteria to phyla in between. The environmental protection agency says these poisons harm humans as well as a variety of aquatic organisms when the water quality is sacrificed in typical wastewater treatment systems. Contrary to popular belief, treated effluents discharged into aquatic bodies contain considerable levels of Anthropogenic contaminants. This evolution necessitates a more robust and recent advancement in the field of remediation and their techniques to completely discharge the various organic and inorganic contaminants.

Phytoremediation of nitrogen and phosphorus pollutants from glass industry effluent by using water hyacinth (Eichhornia crassipes (Mart.) Solms): Application of RSM and ANN techniques for experimental optimization

The present study aimed to assess the efficiency of the water hyacinth (Eichhornia crassipes (Mart.) Solms) plant for the reduction of nitrogen and phosphorus pollutants from glass industry effluent (GIE) as batch mode phytoremediation experiments. For this, response surface methodology (RSM) and artificial neural networks (ANN) methods were adopted to evidence the optimization and prediction performances of E. crassipes for total Kjeldahl's nitrogen (TKN) and total phosphorus (TP) removal. The control parameters, i.e., GIE concentration (0, 50, and 100%) and plant density (1, 3, and 5 numbers) were used to optimize the best reduction conditions of TKN and TP. A quadratic model of RSM and feed-forward backpropagation algorithm-based logistic model (input layer: 2 neurons, hidden layer: 10 neurons, and output layer: 1 neuron) of ANN showed good fitness results for experimental optimization. Optimization results showed that maximum reduction of TKN (93.86%) and TP (87.43%) was achieved by using 60% of GIE concentration and nearly five plants. However, coefficient of determination (R²) values showed that ANN models (TKN: 0.9980; TP: 0.9899) were superior in terms of prediction performance as compared to RSM (TKN: 0.9888; TP: 0.9868). Therefore, the findings of this study concluded that E. crassipes can be effectively used to remediate nitrogen and phosphorus loads of GIE and minimize environmental hazards caused by its unsafe disposal.

Remediation competence of nanoparticles amalgamated biochar (nanobiochar/nanocomposite) on pollutants: A review

Advanced biochar blended nanoparticles substances, such as nano biochar or nanocomposites, have provided long-term solutions to a wide range of modern-day problems. Biochar blended nano-composites can be created to create better composite materials that combine the benefits of biochar and nanoparticles. Such materials have been typically improved with active functional groups, porous structure, active surface area, catalytic deterioration ability, as well as easy recovery or separation of pollutants. Such biochar-basednanocomposites have good adsorption properties for a variety of pollutants in various form of polluted medium (soil and water contamination). Catalytic nanoparticle encapsulated biochar, can perform concurrently the adsorption (by biochar) as well as catalytic degradation (nanoparticles) functions for pollutants removal from polluted sites. In this review, the advanced and practically feasible techniques involved in the biochar blended nanoparticles-based nanocomposites have been discussed with environmental applications. Furthermore, the mechanisms involved in this composite material in remediation, as well as the advantages and disadvantages of biochar blended nanoparticles-based nanocomposites, were discussed, and future directions for study in this field were suggested.

Fast evaluation of the safety of chemical reactions using cytotoxicity potentials and bio-Strips

We introduce new quantitative environmental metrics - "cytotoxicity potentials" - which can be used for the preliminary evaluation of the safety of chemical reactions from the viewpoint of the cytotoxicity of their components. We also elaborate the concept of bio-Profiles to be employed for fast estimation of the potential environmental dangers of chemical processes by (1) including the common cytotoxicity scale for all routes of synthesis of a particular product and (2) proposing a novel, more compact representation of the bio-Profiles themselves in the form of bio-Strips. These improvements allow direct comparisons of various synthetic routes for a particular target product, thus providing faster assessment of the reactions in question from the viewpoint of their "overall cytotoxicity". The advantages of these developments are illustrated by 36 routes of synthesizing 1,1'-biphenyl and 72 routes of synthesizing 4-methoxy-1,1'-biphenyl. The effect of incomplete conversion on bio-Strips and their metrics is also discussed. In addition, we address the impact of the selection of a particular cell line on the evaluation of the reaction safety by comparing the results obtained in three cell lines of various origins.

Molecular diet analysis in mussels and other metazoan filter feeders and an assessment of their utility as natural eDNA samplers

Molecular gut content analysis is a popular tool to study food web interactions and has recently been suggested as an alternative source for DNA-based biomonitoring. However, the overabundant consumer's DNA often outcompetes that of its diet during PCR. Lineage-specific primers are an efficient means to reduce consumer amplification while retaining broad specificity for dietary taxa. Here, we designed an amplicon sequencing assay to monitor the eukaryotic diet of mussels and other metazoan filter feeders and explore the utility of mussels as natural eDNA samplers to monitor planktonic communities. We designed several lineage-specific rDNA primers with broad taxonomic suitability for eukaryotes. The primers were tested using DNA extracts of different limnic and marine mussel species and the results compared to eDNA water samples collected next to the mussel colonies. In addition, we analysed several 25-year time series samples of mussels from German rivers. Our primer sets efficiently prevent the amplification of mussels and other metazoans. The recovered DNA reflects a broad dietary preference across the eukaryotic tree of life and considerable taxonomic overlap with filtered water samples. We also show the utility of a reversed version of our primers, which prevents amplification of nonmetazoan taxa from complex eukaryote community samples, by enriching fauna associated with the marine brown algae Fucus vesiculosus. Our protocol will enable large-scale dietary analysis in metazoan filter feeders, facilitate aquatic food web analysis and allow surveying of aquacultures for pathogens. Moreover, we show that mussels and other aquatic filter feeders can serve as complementary DNA source for biomonitoring.

Molecularly Imprinted Magnetic Nanocomposite Based on Carboxymethyl Dextrin for Removal of Ciprofloxacin Antibiotic from Contaminated Water

Broad-spectrum antibiotics from the fluoroquinolone family have emerged as prominent water contaminants, among other pharmaceutical pollutants. In the present study, an antibacterial magnetic molecularly imprinted polymer (MMIP) composite was successfully fabricated using carboxy methyl dextrin grafted to poly(aniline-co-meta-phenylenediamine) in the presence of Fe3O4/CuO nanoparticles and ciprofloxacin antibiotic. The characteristics of obtained materials were investigated using FTIR, XRD, VSM, TGA, EDX, FE-SEM, zeta potential, and BETanalyses. Afterward, the MMIP's antibacterial activity and adsorption effectiveness for removing ciprofloxacin from aqueous solutions were explored. The results of the antibacterial tests showed that MMIP had an antibacterial effect against Escherichia coli, a Gram-negative pathogen (16 mm), and Staphylococcus aureus, a Gram-positive pathogen (22 mm). Adsorption efficacy was evaluated under a variety of experimental conditions, including solution pH, adsorbent dosage, contact time, and initial concentration. The maximum adsorption capacity (Qmax) of the MMIP for ciprofloxacin was determined to be 1111.1 mg/g using 3 mg of MMIP, with an initial concentration of 400 mg/L of ciprofloxacin at pH 7, within 15 min, and agitated at 25 °C, and the experimental adsorption results were well-described by the Freundlich isotherm model. The adsorption kinetic data were well represented by the pseudo-second-order model. Electrostatic interaction, cation exchange, π-π interactions, and hydrogen bonding were mostly able to adsorb the majority of the ciprofloxacin onto the MMIP. Adsorption-desorption experiments revealed that the MMIP could be retrieved and reused with no noticeable reduction in adsorption efficacy after three consecutive cycles.

Development of a GIS-based knowledge hub for contaminants of emerging concern in South African water resources using open-source software: Lessons learnt

With population growth and dwindling freshwater sources, protecting such sources has come to the forefront of water resource management. Historically, society's response to a problem is based on funding availability, current threat, and public outcry. Achieving this is largely dependent on the knowledge of the factors that are resulting in compromised water sources. These factors are constantly changing as novel contaminants are introduced into surface water sources. As we are in the information age, the interest in contaminants of emerging concern (CEC) is gaining ground. Whilst research is being conducted to identify contaminants in South African water sources, the research outputs and available information is not collated and presented to the science community and stakeholders in readily available formats and platforms. Current research outcomes need to be made known to regulators in order to develop environmental laws. By using fourth industrial revolution technology, we were able to collate available data in literature and display these in a user-friendly online format to regulatory bodies as well as researchers. A standardized excel spreadsheet was developed and uploaded to a PostgreSQL, running a PostGIS extension and was then processed in the GeoServer to allow for visualization on an interactive map which can be continuously updated. The near real-time access to information will reduce the possibility of duplication of research efforts, enhance collaboration in the discipline, and act as a CEC early warning system.

Dynamic UAV Phenotyping for Rice Disease Resistance Analysis Based on Multisource Data

Bacterial blight poses a threat to rice production and food security, which can be controlled through large-scale breeding efforts toward resistant cultivars. Unmanned aerial vehicle (UAV) remote sensing provides an alternative means for the infield phenotype evaluation of crop disease resistance to relatively time-consuming and laborious traditional methods. However, the quality of data acquired by UAV can be affected by several factors such as weather, crop growth period, and geographical location, which can limit their utility for the detection of crop disease and resistant phenotypes. Therefore, a more effective use of UAV data for crop disease phenotype analysis is required. In this paper, we used time series UAV remote sensing data together with accumulated temperature data to train the rice bacterial blight severity evaluation model. The best results obtained with the predictive model showed an R _p ² of 0.86 with an RMSE_p of 0.65. Moreover, model updating strategy was used to explore the scalability of the established model in different geographical locations. Twenty percent of transferred data for model training was useful for the evaluation of disease severity over different sites. In addition, the method for phenotypic analysis of rice disease we built here was combined with quantitative trait loci (QTL) analysis to identify resistance QTL in genetic populations at different growth stages. Three new QTLs were identified, and QTLs identified at different growth stages were inconsistent. QTL analysis combined with UAV high-throughput phenotyping provides new ideas for accelerating disease resistance breeding.

Application of gas chromatographic data and 2D molecular descriptors for accurate global mobility potential prediction

Mobility is a key feature affecting the environmental fate, which is of particular importance in the case of persistent organic pollutants (POPs) and emerging pollutants (EPs). In this study, the global mobility classification artificial neural networks-based models employing GC retention times (RT) and 2D molecular descriptors were constructed and validated. The high usability of RT was confirmed based on the feature selection step performed using the multivariate adaptive regression splines (MARS) tool. Although RT was found to be the most important, according to Kruskal-Wallis ANOVA analysis, it is insufficient to build a robust model, which justifies the need to expand the input layer with 2D descriptors. Therefore the following molecular descriptors: MPC10, WTPT-2, AATS8s, minaaCH, GATS7c, RotBtFrac, ATSC7v and ATSC1p, which were characterized by a high predicting potential were used to improve the classification performance. As a result of machine learning procedure ten of the most accurate neural networks were selected. The external validation showed that the final models are characterized by a high general accuracy score (85.71-96.43%). The high predicting abilities were also confirmed by the micro-averaged Matthews correlation coefficient (MAMCC) (0.73-0.88). To evaluate the applicability of the models, new retention times of selected POPs and EPs including pesticides, polycyclic aromatic hydrocarbons, pharmaceuticals, fragrances and personal care products were measured and used for mobility prediction. Further, the classifiers were used for photodegradation and chlorination products of two popular sunscreen agents, 2-ethyl-hexyl-4-methoxycinnamate and 2-ethylhexyl 4-(dimethylamino)benzoate.

Efficient Uptake of Angiotensin-Converting Enzyme II Inhibitor Employing Graphene Oxide-Based Magnetic Nanoadsorbents

This paper reports a high efficiency uptake of captopril (CPT), employing magnetic graphene oxide (MGO) as the adsorbent. The graphene oxide (GO) was produced through an oxidation and exfoliation method, and the magnetization technique by the co-precipitation method. The nanomaterials were characterized by FTIR, XRD, SEM, Raman, and VSM analysis. The optimal condition was reached by employing GO·Fe3O4 at pH 3.0 (50 mg of adsorbent and 50 mg L−1 of CPT), presenting values of removal percentage and maximum adsorption capacity of 99.43% and 100.41 mg g−1, respectively. The CPT adsorption was dependent on adsorbent dosage, initial concentration of adsorbate, pH, and ionic strength. Sips and Elovich models showed the best adjustment for experimental data, suggesting that adsorption occurs in a heterogeneous surface. Thermodynamic parameters reveal a favorable, exothermic, involving a chemisorption process. The magnetic carbon nanomaterial exhibited a high efficiency after five adsorption/desorption cycles. Finally, the GO·Fe3O4 showed an excellent performance in CPT removal, allowing future application in waste management.

Nanomaterials to address the genesis of antibiotic resistance in Escherichia coli

Escherichia is a genus of prokaryotic gram-negative bacteria which forms a vital component of the gut microbiota of homeotherms including humans. Many members of this genus are commensals and pathogenic strains, which are responsible for some of the most common bacterial infections and can be fatal, particularly in the case of newborns and children. The fecal matter in wastewater treatment plants serves as major environmental sinks for the accumulation of Escherichia. The rise in antibiotic pollution and the lateral gene exchange of antibiotic-resistant genes have created antibiotic-resistant Escherichia strains that are often called superbugs. Antibiotic resistance has reached a crisis level that nowadays existing antibiotics are no longer effective. One way of tackling this emerging concern is by using nanomaterials. Punitively, nanomaterials can be used by conjugating with antibodies, biomolecules, and peptides to reduce antibiotic usage, whereas, preventatively, they can be used as either nano-antimicrobial additives or nano-photocatalytic sheets to reduce the microbial population and target the superbugs of environmental Escherichia. In this review, we have explored the threat posed by pathogenic Escherichia strains in the environment, especially in the context of antibiotic-resistant strains. Along with this, we have discussed some nanomaterial-mediated strategies in which the problem can be addressed by using nanomaterials as nanophotocatalytics, antimicrobial additives, drugs, and drug conjugates. This review also presents a brief overview of the ecological threats posed by the overuse of nanomaterials which warrants a balanced and judicious approach to the problem.