Enhanced bio-catalytic performance and dye degradation potential of chitosan-encapsulated horseradish peroxidase in a packed bed reactor system

Application of lipase immobilized on a hydrophobic support for the synthesis of aromatic esters

The present study aimed at preparing three biocatalysts via physical adsorption of lipases from Candida rugosa (CRL), Mucor javanicus, and Candida sp. on a hydrophobic and mesoporous support (Diaion HP-20). These biocatalysts were later applied to the synthesis of aromatic esters of apple peel and citrus (hexyl butyrate), apple and rose (geranyl butyrate), and apricot and pineapple (propyl butyrate). Scanning electron microscopy and gel electrophoresis confirmed a selective adsorption of lipases on Diaion, thus endorsing simultaneous immobilization and purification. Gibbs free energy (∆G) evinced the spontaneity of the process (-17.9 kJ/mol ≤ ∆G ≤ -5.1 kJ/mol). Maximum immobilized protein concentration of 30 mg/g support by CRL. This biocatalyst was the most active in olive oil hydrolysis (hydrolytic activity of 126.0 ± 2.0 U/g) and in the synthesis of aromatic esters. Maximum conversion yield of 89.1% was attained after 150 Min for the synthesis of hexyl butyrate, followed by the synthesis of geranyl butyrate (87.3% after 240 Min) and propyl butyrate (80.0% after 150 Min). CRL immobilized on Diaion retained around 93% of its original activity after six consecutive cycles of 150 Min for the synthesis of hexyl butyrate.

Designing and investigation of photo-active gellan gum for the efficient immobilization of catalase by entrapment

A photo-active gellan gum (Gel) derivative was developed by amide bond combination with trans-4-[p-(amino)styryl]pyridine (SP). The SP-Gel was cross-linked by UV curing via the intermolecular 2π + 2π cycloaddition of the inserted SP-CH=CH- moieties. The chemical structure of the obtained photo-crosslinkable biopolymer was investigated before and after the UV curing and the progress of the performed 2π + 2π cycloaddition-based cross-linking was detected via UV-visible light spectra. SP-Gel was evaluated as a polymeric matrix for the immobilization of catalase via entrapment technique. The synthesized biopolymer was mixed with the catalase and molded in the form of membranes that were UV cured to encapsulate the enzyme. The membranes were able to entrap 0.75 mg/cm² with retained activity reached above 95%. The immobilized catalase displayed higher thermal stability and higher resistance toward the environmental pH disturbances compared to the free enzyme. Also, despite the observed lower catalase-H₂O₂ affinity upon the entrapment that was indicated from the performed kinetic studies, the reusability and storage stability experiments revealed the economic value of the entire process by preserving around 95% and 83% of the initial catalase activity after the fifth and tenth operation cycles, respectively.

Laccases and peroxidases: The smart, greener and futuristic biocatalytic tools to mitigate recalcitrant emerging pollutants

Various organic pollutants so-called emerging pollutants (EPs), including active residues from pharmaceuticals, pesticides, surfactants, hormones, and personal care products, are increasingly being detected in numerous environmental matrices including water. The persistence of these EPs can cause adverse ecological and human health effects even at very small concentrations in the range of micrograms per liter or lower, hence called micropollutants (MPs). The existence of EPs/MPs tends to be challenging to mitigate from the environment effectively. Unfortunately, most of them are not removed during the present-day treatment plants. So far, a range of treatment processes and degradation methods have been introduced and deployed against various EPs and/or MPs, such as ultrafiltration, nanofiltration, advanced oxidation processes (AOPs) and enzyme-based treatments coupled with membrane filtrations. To further strengthen the treatment processes and to overcome the EPs/MPs effective removal dilemma, numerous studies have revealed the applicability and notable biocatalytic potentialities of laccases and peroxidases to degrade different classes of organic pollutants. Exquisite selectivity and unique catalytic properties make these enzymes powerful biocatalytic candidates for bio-transforming an array of toxic contaminants to harmless entities. This review focuses on the use of laccases and peroxidases, such as soybean peroxidase (SBP), horseradish peroxidase (HRP), lignin peroxidase (LiP), manganese peroxidase (MnP), and chloroperoxidase (CPO) as a greener oxidation route towards efficient and effective removal or degradation of EPs/MPs.

Recent development in the application of immobilized oxidative enzymes for bioremediation of hazardous micropollutants - A review

During the past several years, abundant progresses has been made in the development of immobilized oxidative enzymes with focus on finding new support materials, improving the immobilization methods and their applications. Nowadays, immobilized oxidative enzymes are broadly accepted as a green way to face the challenge of high amounts of micropollutants in nature. Among all oxidative enzymes, laccases and horseradish peroxidase were used frequently in recent years as they are general oxidative enzymes with ability to oxidize various types of compounds. Immobilized laccase or horseradish peroxidase are showed better stability, and reusability as well as easy separation from reaction mixture that make them more favorable and economic in compared to free enzymes. However, additional improvements are still essential such as: development of the new materials for immobilization with higher capacity, easy preparation, and cheaper price. Moreover, immobilization methods are still need improving to become more efficient and avoid enzyme wasting during immobilization and enzyme leakage through working cycles.

Engineering Functionalized Chitosan-Based Sorbent Material: Characterization and Sorption of Toxic Elements

The present study reports the engineering of functionalized chitosan (CH)-based biosorbent material. Herein, a two-step reaction was performed to chemically modify the CH using 1,4-bis(3-aminopropyl) piperazine to incorporate nitrogen basic centers for cations sorption from the aqueous environment. The resultant functionalized chitosan-based sorbent material was designated as CH-ANP and characterized using various analytical techniques, including elemental analysis, Fourier-transform infrared spectroscopy (FTIR), 13C NMR (in solid-state), X-ray diffraction, and thermal analysis. Then, the newly engineered CH-ANP was employed for the removal of copper, lead, and cadmium in the aqueous medium. Langmuir sorption isotherm analysis revealed that the highest sorption abilities achieved were 2.82, 1.96, and 1.60 mmol g−1 for copper, cadmium, and lead, respectively. Linear and nonlinear regression methods were deployed on the sorption data to study the behavior of the Langmuir, the Freundlich, and the Temkin sorption isotherms. Among the four different forms, the Langmuir isotherm type 1 fit well to the experimental data as compared to the other models. It also showed the lowest values of error, and a higher correlation coefficient than the Freundlich and Temkin models; thus it was the best fit with the experimental data compared to the latter two models. In conclusion, the findings suggest that chemically modified novel materials with enhanced Lewis basic centers are useful and promising candidates for the sorption of various toxic cations in aqueous solution.

TiO2/SiO2 decorated carbon nanostructured materials as a multifunctional platform for emerging pollutants removal

Aquatic ecosystem contaminated with hazardous pollutants has become a high priority global concern leading to serious economic and environmental damage. Among various treatment approaches, carbon nanostructured materials have received particular interest as a novel platform for emerging pollutants removal owing to their unique chemical and electrical properties, biocompatibility, high scalability, and infinite functionalization possibility with an array of inorganic nanomaterials and bio-molecules. Within this framework, carbon nanotubes (CNTs) are widely used due to their hollow and layered structure and availability of large specific surface area for the incoming contaminants. Carbon nanotubes can be used either as single-walled, multi-walled, or functionalized nanoconstructs. TiO₂/SiO₂-functionalized CNTs are among the most promising heterogeneous photocatalytic candidates for the degradation of a range of organic compounds, heavy metals reduction, and selective oxidative reactions. Herein, we reviewed recent development in the application of TiO₂ and SiO₂ functionalized nanostructured carbon materials as potential environmental candidates. After a brief overview of synthesis and properties of CNTs, we explicitly discussed the potential applications of TiO₂/SiO₂ functionalized CNTs for the remediation of a variety of environmentally-related pollutants of high concern, including synthetic dyes or dye-based hazardous waste effluents, as polycyclic aromatic hydrocarbons (PAHs), pharmaceutically active compounds, pesticides, toxic heavy elements, remediation of metal-contaminated soil, and miscellaneous organic contaminants. The work is wrapped up by giving information on current challenges and recommended guidelines about future research in the field bearing in mind the conclusions of the current review.

Sunflower stalk-derived biochar enhanced thermal activation of persulfate for high efficient oxidation of p-nitrophenol

Sunflower stalk-derived biochars (BC) were prepared at various temperatures (i.e., 500, 650, and 1000 °C) and demonstrated as a highly efficient catalyst in persulfate (PS) activation for the oxidation of p-nitrophenol (PNP) at 60 °C. The apparent PNP oxidation rate constant in the BC500 (0.1543 L mol^-1 S^-1), BC650 (0.6062 L mol^-1 S^-1), or BC1000 (2.1379 L mol^-1 S^-1) containing PS system was about 2, 8 and 28 times higher than that in PS/PNP (0.0751 L mol^-1 S^-1) system, respectively. The effect of reaction temperature on PNP oxidation was also investigated. Furthermore, the radical quenching tests and electron paramagnetic resonance spectroscopy (EPR) were employed to investigate the sulfate and hydroxyl radicals for PNP oxidation. The Raman results suggested that the defective sites on biochars possess vital role for oxidation of PNP in PS system. The possible activation pathway of PS/BC was proposed that the defective sites on BC were involved for weakening the O-O bond in PS and subsequently cleaving O-O bond by heat to generate sulfate radical. The oxidation of PNP at low concentration (below 100 μg L^-1) was completely removed in urban wastewater by PS/BC system within 30 min. This work would provide new insights into PS activation by BC catalyst and afford a promising method for organic pollutant removal in high-temperature wastewater.

Mitigation of environmental pollution by genetically engineered bacteria - Current challenges and future perspectives

Industries are the paramount driving force for the economic and technological development of society. However, the flourishing industrialization and unimpeded growth of current production unit's result in widespread environmental pollution due to increased discharge of wastes loaded with baleful, hazardous, and carcinogenic contaminants. Physicochemical-based remediation means are costly, create a secondary disposal problem and remain inadequate for pollution mitigating because of the continuous emergence of new recalcitrant pollutants. Due to eco-friendly, social acceptance, and lesser health hazards, microbial bioremediation has received considerable global attention for pollution abatement. Moreover, with the recent advancement in biotechnology and microbiology, genetically engineered bacteria with high ability to remove environmental pollutants are widely used in the fields of environmental restoration, resulting in the bioremediation in a more viable and eco-friendly way. This review summarized the advantages of genetically engineered bacteria and their application in the treatment of a wide variety of environmental contaminants such as synthetic dyestuff, heavy metal, petroleum hydrocarbons, polychlorinated biphenyls, phenazines and agricultural chemicals which will include herbicides, pesticides, and fertilizers. Considering the risk of genetic material exchange by using genetically engineered bacteria, the challenges and limitations associated with the application of recombinant bacteria on contaminated sites are also discussed. An integrated microbiological, biological and ecological acquaintance accompanied by field engineering designs are the desired features for effective in situ bioremediation of hazardous waste polluted sites by recombinant bacteria.

Agarose-chitosan hydrogel-immobilized horseradish peroxidase with sustainable bio-catalytic and dye degradation properties

Herein, we developed and characterized robust agarose-chitosan hydrogel using N‑hydroxysuccinimide (NHS) as a mild chemical cross-linker. The hydrogel offered a simple, effective and eco-friendlier support material with >90% of immobilization efficiency of horseradish peroxidase. The surface morphology and functional properties of the agarose-chitosan hydrogel with and without immobilized horseradish peroxidase were investigated by scanning electron microscopy and Fourier-transform infrared, respectively. The agarose-chitosan hydrogel-immobilized horseradish peroxidase (ACH-HRP) exhibited wide-working pH and temperature stability, and promising reusability for its substrate oxidation. The ACH-HRP preserved a better activity under acidic environments, pH 4.0 (38 vs. 5.9%), and well stabilized under alkaline conditions, retaining a 3.9-folds greater activity than a free counterpart at pH 10. With reference to a free enzyme, 1.6- and 4-fold greater catalytic activity was achieved at 50 and 70 °C, respectively, by the immobilized HRP. Further, the hydrogel displayed insignificant loss in enzyme functionality sustaining above 90% and 60% of original activity after 5 and 10 continuous cycles of use. HPLC profile corroborated the enzyme-assisted Reactive Blue 19 (RB-19) degradation, whereas UPLC/MS analysis scrutinized the dye degradation intermediates and a tentative mechanistic degradation pathway was proposed. In conclusion, the results demonstrate that ACH-HRP is a promising option for use as industrial biocatalyst in diverse biotechnological applications.

Emerging contaminants of high concern and their enzyme-assisted biodegradation - A review

The widespread occurrence and adverse environmental and health-related impacts of various types of emerging contaminants (ECs) have become an issue of high concern. With ever increasing scientific knowledge, socio-economic awareness, health-related problems and ecological apprehensions, people are more concerned about the widespread ECs, around the globe. Among ECs, biologically active compounds from pharmaceutical, cosmeceutical, biomedical, personal care products (PPCPs), endocrine-disrupting chemicals (EDCs), and flame-retardants are of paramount concern. The presence and persistence of ECs in water bodies are of continued and burning interest, worldwide. Various types of ECs are being discharged knowingly/unknowingly with/without partial treatments into the aquatic environments that pose serious health issues and affects the entire living ecosystem. So far, various approaches have been developed for ECs degradation and removal to diminish their adverse impact. Many previous and/or ongoing studies have focused on contaminants degradation and efficient removal via numerous treatment strategies, i.e. (1) physical, (2) chemical and (3) biological. However, the experimental evidence is lacking to enable specific predictions about ECs mechanistic degradation and removal fate across various in-practice systems. In this context, the deployment oxidoreductases such as peroxidases (lignin peroxidases, manganese-dependent peroxidases, and horseradish peroxidase), aromatic dioxygenases, various oxygenases, laccases, and tyrosinases have received considerable research attention. Immobilization is highlighted as a promising approach to improve enzyme catalytic performance and stabilization, as well as, to protect the three-dimensional structure of the enzyme against the undesirable consequences of harsh reaction environment. This work overviews the current and state-of-the-art critical aspect related to hazardous pollutants at large and ECs in particular by the immobilized oxidoreductase enzymes. The first part of the review focuses on the occurrence, physiochemical behavior, potent sources and significant routes of ECs. Following that, environmentally-related adverse impacts and health-related issues of ECs are discussed in the second part. In the third part, biodegradation and removal strategies with a comparative overview of several conventional vs. non-conventional methods are presented briefly. The fourth part majorly focuses on operational modes of different oxidoreductase enzyme-based biocatalytic processes for the biodegradation and biotransformation of a wide array of harmful environmental contaminants. Finally, the left behind research gaps, concluding remarks as well as future trends and recommendations in the use of carrier-immobilized oxidoreductases for environmental perspective are also discussed.

Immobilization of Peroxidase on Functionalized MWCNTs-Buckypaper/Polyvinyl alcohol Nanocomposite Membrane

Surface modified Multi-walled carbon nanotubes (MWCNTs) Buckypaper/Polyvinyl Alcohol (BP/PVA) composite membrane was synthesized and utilized as support material for immobilization of Jicama peroxidase (JP). JP was successfully immobilized on the BP/PVA membrane via covalent bonding by using glutaraldehyde. The immobilization efficiency was optimized using response surface methodology (RSM) with the face-centered central composite design (FCCCD) model. The optimum enzyme immobilization efficiency was achieved at pH 6, with initial enzyme loading of 0.13 U/mL and immobilization time of 130 min. The results of BP/PVA membrane showed excellent performance in immobilization of JP with high enzyme loading of 217 mg/g and immobilization efficiency of 81.74%. The immobilized system exhibited significantly improved operational stability under various parameters, such as pH, temperature, thermal and storage stabilities when compared with free enzyme. The effective binding of peroxidase on the surface of the BP/PVA membrane was evaluated and confirmed by Field emission scanning electron microscopy (FESEM) coupled with Energy Dispersive X-Ray Spectroscopy (EDX), Fourier transform infrared spectroscopy (FTIR) and Thermogravimetric Analysis (TGA). This work reports the characterization results and performances of the surface modified BP/PVA membrane for peroxidase immobilization. The superior properties of JP-immobilized BP/PVA membrane make it promising new-generation nanomaterials for industrial applications.

Environmentally-related contaminants of high concern: Potential sources and analytical modalities for detection, quantification, and treatment

In recent years, emerging contaminants (ECs) of high concern are broadly distributed throughout the environmental matrices because of various industrial practices and anthropogenic inputs, i.e., human-made activities. With ever increasing scientific knowledge, technological advancement, socio-economic awareness, people are now more concern about the widespread distribution of environmentally related ECs of high concern. As, ECs possess serious ecological threats and potential risks to human health and aquatic life, even at minor concentrations. The controlled or uncontrolled discharge and long-term persistence of ECs that includes micro-pollutants, endocrine disruptors (EDs), pesticides, pharmaceuticals, hormones, toxins, and industrially-related synthetic dyes and dyes-containing hazardous pollutants, etc. pose a significant challenge to policy regulators, engineers, and scientific community. The conventional treatment technologies are proved ineffective for the complete elimination and removal of an array of contaminants of emerging environmental concern in various biological and environmental samples. In order to overcome the aforementioned ecological threats, tremendous research efforts have been made to boost the efficiency of remediation techniques or develop new modalities to detect, quantify and treat the samples efficiently. The boom in biotechnology and environmental engineering offers potential opportunities to develop advanced and innovative remediation techniques in the field of water treatment. This review discusses the environmental and health hazards associated with a widespread distribution of micro-pollutants, pesticides, pharmaceuticals, hormones, and industrially-related synthetic dyes and dyes-containing hazardous pollutants, etc. in the water bodies, i.e., surface water, groundwater, and industrial wastewater streams. Life-cycle distribution of emerging (micro)-pollutants with suitable examples from various industrial sources viewpoints is also discussed. The later part of the review focuses on innovative and cost-effective remediation (removal) approaches from phase-changing treatment technologies for these ECs of high concern.

Peroxidases-assisted removal of environmentally-related hazardous pollutants with reference to the reaction mechanisms of industrial dyes

Environmental protection is one of the most important challenges for the humankind. Increasing number of emerging pollutants resulting from industrial/human-made activities represents a serious menace to the ecological and environmental equilibrium. Industrial dyes, endocrine disrupters, pesticides, phenols and halogenated phenols, polycyclic aromatic hydrocarbons, polychlorinated biphenyls, and other xenobiotics are among the top priority environmental pollutants. Some classical remediation approaches including physical, chemical and biological are being employed, but are ineffective in cleaning the environment. Enzyme-catalyzed transformation reactions are gearing accelerating attention in this context as potential alternatives to classical chemical methods. Peroxidases are catalysts able to decontaminate an array of toxic compounds by a free radical mechanism resulting in oxidized or depolymerized products along with a significant toxicity reduction. Admittedly, enzymatic catalysis offers the hallmark of high chemo-, regio-, and enantioselectivity and superior catalytic efficiency under given reaction environment. Moreover, enzymes are considered more benign, socially acceptable and greener production routes since derived from the renewable and sustainable feedstock. Regardless of their versatility and potential use in environmental processes, several limitations, such as heterologous production, catalytic stability, and redox potential should be overcome to implement peroxidases at large-scale transformation and bio-elimination of recalcitrant pollutants. In this article, a critical review of the transformation of different types of hazardous pollutants by peroxidases, with special reference to the proposed reaction mechanisms of several dyes is presented. Following that major challenges for industrial and environmental applications of peroxidases are also discussed. Towards the end, the information is also given on miscellaneous applications of peroxidases, concluding remarks and outlook.

Magnetic nanoparticles as versatile carriers for enzymes immobilization: A review

Enzymes are highly efficient biocatalysts and widely employed in biotechnological sectors. However, lack of (re)-purification and efficient recovery of enzymes are among the most critical and challenging aspects, which render them enormously expensive for industrial exploitability. Aiming to tackle these challenges, magnetic nanoparticles (MNPs) have gained a special place as versatile carriers and supporting matrices for immobilization purposes, owing to the exceptional properties of MNPs, such as large surface area, large surface-to-volume ratio, and mobility and high mass transference. More importantly, they can also be easily separated and recovered by applying an external magnetic field. Apart from their biocompatible micro-environment, the utilization of such MNPs represents a noteworthy green chemistry approach, since it lengthens the biocatalyst lifetime through multiple recovery cycles. According to the literature evidence, various modification and/or functionalization approaches have been developed to produce MNPs for the effective immobilization of a broad variety of industrially important enzymes and biomolecules with improved characteristics. Enzymes immobilized on MNPs displayed a wide-working pH and temperature range, as well as, improved thermal and storage stabilities than that of their pristine counterparts. Co-immobilization of multi-enzymes could also be accomplished through nanoparticle-based approaches. This review presents an updated outlook on the development and characterization of MNPs, in particular, iron-based MNPs-derived nano-constructs as support materials for enzyme immobilization.

Graphene and graphene oxide: Functionalization and nano-bio-catalytic system for enzyme immobilization and biotechnological perspective

Graphene-based nanomaterials have gained high research interest in different fields related to proteins and thus are rapidly becoming the most widely investigated carbon-based materials. Their exceptional physiochemical properties such as electrical, optical, thermal and mechanical strength enable graphene to render graphene-based nanostructured materials suitable for applications in different fields such as electroanalytical chemistry, electrochemical sensors and immobilization of biomolecules and enzymes. The structural feature of oxygenated graphene, i.e., graphene oxide (GO) covered with different functionalities such as epoxy, hydroxyl, and carboxylic group, open a new direction of chemical modification of GO with desired properties. This review describes the recent progress related to the structural geometry, physiochemical characteristics, and functionalization of GO, and the development of graphene-based novel carriers as host for enzyme immobilization. Graphene derivatives-based applications are progressively increasing, in recent years. Therefore, from the bio-catalysis and biotransformation viewpoint, the biotechnological perspective of graphene-immobilized nano-bio-catalysts is of supreme interest. The structural geometry, unique properties, and functionalization of graphene derivatives and graphene-based nanomaterials as host for enzyme immobilization are highlighted in this review. Also, the role of GO-based catalytic systems such as microfluidic bio-catalysis, enzyme-based biofuel cells, and biosensors are also discussed with potential future perspectives of these multifaceted materials.

"Smart" chemistry and its application in peroxidase immobilization using different support materials

In the past few decades, the enzyme immobilization technology has been exploited a lot and thus became a matter of rational design. Immobilization is an alternative approach to bio-catalysis with the added benefits, adaptability to automation and high-throughput applications. Immobilization-based approaches represent simple but effective routes for engineering enzyme catalysts with higher activities than wild-type or pristine counterparts. From the chemistry viewpoint, the concept of stabilization via manipulation of functional entities, the enzyme surfaces have been an important driving force for immobilizing purposes. In addition, the unique physiochemical and structural functionalities of pristine or engineered cues, or insoluble support matrices (carrier) such as mean particle diameter, swelling behavior, mechanical strength, and compression behavior are of supreme interest and importance for the performance of the immobilized systems. Immobilization of peroxidases into/onto insoluble support matrices is advantageous for practical applications due to convenience in handling, ease separation of enzymes from a reaction mixture and the reusability. A plethora of literature is available explaining individual immobilization system. However, current literature lacks the chemistry viewpoint of immobilization. This review work presents state-of-the-art "Smart" chemistry of immobilization and novel potentialities of several materials-based cues with different geometries including microspheres, hydrogels and polymeric membranes, nanoparticles, nanofibers, composite and hybrid or blended support materials. The involvement of various functional groups including amino, thiol, carboxylic, hydroxyl, and epoxy groups via "click" chemistry, amine chemistry, thiol chemistry, carboxyl chemistry, and epoxy chemistry over the protein surfaces is discussed.

Protease-based cross-linked enzyme aggregates with improved catalytic stability, silver removal, and dehairing potentials

Proteases have gained special research place due to their broader activity spectrum and applied perspectives for different industrial sectors. The present research focused on three aims, i.e., (1) to identify the best protease producer strain among three different Aspergillus strains, (2) the development of protease-based cross-linked enzyme aggregates (CLEAs) and (3) silver removal and dehairing potentialities of developed CLEAs. A. flavus gave optimum activity (98.50 U/mL) with the culture conditions (pH -7.5, 35 °C, inoculum 2.5 mL and fermentation time 48 h) by applying RSM under CCD. The protease-CLEAs were developed with recovery activity (37.45%) by optimizing conditions through RSM under CCD (80% ammonium sulfate, 65 mM glutaraldehyde, and 0.15 mM BSA). The adequacy of the model was checked by ANOVA, and the interactions among different variables were plotted using 3-D graphs. The characterization profile revealed high pH and thermal stability at pH -9 and 60 °C, respectively. The kinetic study revealed lower K_M and higher V_max values (31.02 μM and 91.16 U/mL, respectively) after CLEAs formation, as compared to the free protease (61.42 μM and 84.45 U/mL, respectively). By applying on X-ray film and animal hides, protease-CLEAs showed the best activity with minimum time as compared to free protease.

Immobilization of ligninolytic enzymes from white-rot fungi in cross-linked aggregates

Ligninolytic enzymes from white-rot fungi are widely used in biotechnological processes. However, the application of these enzymes as free enzymes is limited due to their instability and lack of reusability. Enzyme stabilization is therefore a major challenge in biocatalytic process research, and immobilization methods are desirable. Using cross-linked enzyme aggregates (CLEAs) such as magnetic CLEAs, porous-CLEAs and combi-CLEAs is a promising technique for overcoming these issues. Cross-linking methods can stabilize and immobilize enzymes by interconnecting enzyme molecules via multiple bonds using cross-linking agents such as glutaraldehyde. The high catalyst density and microporous assembly of CLEAs guarantee high catalyst activity, which, together with their long shelf life, operational stability, and reusability, provide a cost-efficient alternative to matrix-assisted immobilization approaches. Here, we review current progress in ligninolytic enzyme immobilization and provide a comprehensive review of CLEAs. Moreover, we summarize the use of these CLEAs for biocatalysis processes, bioremediation such as dye decolourization, wastewater treatment or pharmaceutically active compound elimination.

Horseradish peroxidase immobilization by copolymerization into cross-linked polyacrylamide gel and its dye degradation and detoxification potential

Owing to the ever-increasing environmental and health impacts associated with the discharge of dye-based effluents, effective remediation of industrial waste have become a top priority for the industrialists and environmental fraternity, around the world. Plant-based peroxidases represent a suitable bio-remediating agent for the effective treatment of original dyes or dye-based colored wastewater effluents. In the present study, horseradish peroxidase was immobilized by copolymerization into cross-linked polyacrylamide gel and investigated its potential for the degradation and detoxification of an azo dye, methyl orange. In the presence of N, N'-methylenebisacrylamide as a cross-linker, polyacrylamide gel at 10% concentration furnished >80% of immobilization yield. The surface morphology of the control (free enzyme) and immobilized enzyme, i.e., horseradish peroxidase cross-linked polyacrylamide gel was characterized using scanning electron microscopy. The high yielded horseradish peroxidase cross-linked polyacrylamide gel concentration, i.e., 10% was used to develop a packed bed reactor and exploited for dye degradation and detoxification purposes. A noteworthy level (>90%) of dye degradation was recorded after polyacrylamide gel cross-linked horseradish peroxidase-catalyzed reaction in a packed bed bioreactor. The biodegradation was further assessed by Fourier-transform infrared spectral analysis. The acute toxicity assays demonstrated that enzyme-based bio-degradation might be used effectively for large-scale environmental remediation of dyes and dyes containing wastewater effluents.

TiO2/UV-assisted rhodamine B degradation: putative pathway and identification of intermediates by UPLC/MS

The present study was designed to evaluate the photocatalytic degradation of Rhodamine B (Rh-B) in a self-assembled TiO₂-assisted system under UV light irradiation. Chemical oxygen demand, total organic carbon and high-performance liquid chromatography analyses confirmed the elevated Rh-B degradation level. A stepwise meticulous breakdown pathway based on the ultra-performance liquid chromatography coupled with electrospray ionization mass spectrometry is proposed. Results demonstrated that the degradation of Rh-B mainly occurred via N-de-ethylation process, and N-de-ethylated intermediate products were further oxidized into acids and alcohols. Reduction in toxicity of the dye by the formation of metabolites was measured using human cell lines (MTT assay) and toxicity tests based on shrimp Artemia salina. Noticeably, the degraded intermediates of Rh-B revealed low or non-toxicity than the original dye molecule. Therefore, it can be inferred that the TiO₂-assisted photocatalysis could be beneficial for the degradation of recalcitrant compounds and textile wastewater effluents, and for the elimination of toxicity therein.

State-of-the-art protein engineering approaches using biological macromolecules: A review from immobilization to implementation view point

Over the past years, technological and scientific advances have proven biocatalysis as a sustainable alternative than traditional chemical catalysis including organo- or metallocatalysis. In this context, immobilization based approaches represent simple but effective routes for engineering enzyme catalysts with higher activities than wild-type derivatives. Many enzymes including oxidoreductases have been engineered by rational and directed evolution, to realize the catalytic activity, enantioselectivity, and stability attributes which are essential for their biotechnological exploitation. Induce yet stable activity in enzyme catalysis offer new insights and motivation to engineer efficient catalysts for practical and commercial purposes. It has now become possible to envisage substrate accessibility to the catalytic site of the enzyme by current computational capabilities that reduce the experimental work related to the enzyme selection, screening, and engineering. Herein, state-of-the-art protein engineering approaches for improving enzymatic activities including chemical modification, directed evolution, and rational design or their combination methods are discussed. The emphasis is also given to the applications of the resulting tailored catalysts ranging from fine chemicals to novel pharmaceutical compounds that use biocatalysts as a vital step.

Understanding the sorption and biotransformation of organic micropollutants in innovative biological wastewater treatment technologies

New technologies for wastewater treatment have been developed in the last years based on the combination of biological reactors operating under different redox conditions. Their efficiency in the removal of organic micropollutants (OMPs) has not been clearly assessed yet. This review paper is focussed on understanding the sorption and biotransformation of a selected group of 17 OMPs, including pharmaceuticals, hormones and personal care products, during biological wastewater treatment processes. Apart from considering the role of "classical" operational parameters, new factors such as biomass conformation and particle size, upward velocity applied or the addition of adsorbents have been considered. It has been found that the OMP removal by sorption not only depends on their physico-chemical characteristics and other parameters, such as the biomass conformation and particle size, or some operational conditions also relevant. Membrane biological reactors (MBR), have shown to enhance sorption and biotransformation of some OMPs. The same applies to technologies bases on direct addition of activated carbon in bioreactors. The OMP biotransformation degree and pathway is mainly driven by the redox potential and the primary substrate activity. The combination of different redox potentials in hybrid reactor systems can significantly enhance the overall OMP removal efficiency. Sorption and biotransformation can be synergistically promoted in biological reactors by the addition of activated carbon. The deeper knowledge of the main parameters influencing OMP removal provided by this review will allow optimizing the biological processes in the future.

Preparation of Biocolorant and Eco-Dyeing Derived from Polyphenols Based on Laccase-Catalyzed Oxidative Polymerization

Natural products have been believed to be a promising source to obtain ecological dyes and pigments. Plant polyphenol is a kind of significant natural compound, and tea provides a rich source of polyphenols. In this study, biocolorant derived from phenolic compounds was generated based on laccase-catalyzed oxidative polymerization, and eco-dyeing of silk and wool fabrics with pigments derived from tea was investigated under the influence of pH variation. This work demonstrated that the dyeing property was better under acidic conditions compared to alkalinity, and fixation rate was the best when pH value was 3. Furthermore, breaking strength of dyed fabrics sharply reduced under the condition of pH 11. Eventually, the dyeing method was an eco-friendly process, which was based on bioconversion, and no mordant was added during the process of dyeing.

The effect of operational parameters on the biodegradation of bisphenols by Trametes versicolor laccase immobilized on Hippospongia communis spongin scaffolds

Due to the rapid growth in quantities of phenolic compounds in wastewater, the development of efficient and environmentally friendly methods for their removal becomes a necessity. Thus, in a presented work, for the first time, a novel material, Hippospongia communis spongin-based scaffold, was used as a biopolymeric support for the immobilization of laccase from Trametes versicolor. The resulting biocatalytic systems were used for the biodegradation of three bisphenols: bisphenol A (BPA), bisphenol F (BPF) and bioremoval-resistant bisphenol S (BPS). Optimization of the immobilization and biodegradation methodologies was performed to increase bisphenols removal. The effect of temperature, pH and initial pollutant concentration was evaluated. It was shown that under optimal conditions, almost 100% of BPA (pH5, 30°C) and BPF (pH5, 40°C), and over 40% of BPS (pH4, 30°C) was removed from the solution at a concentration of 2mg/mL. Furthermore, the immobilized laccase exhibited good reusability and storage stability, retaining over 80% of its initial activity after 50days of storage. In addition, the main biodegradation products of BPA and BPF were identified. It was shown that mainly dimers and trimers were formed following the oxidation of bisphenols by the immobilized laccase.

Horseradish peroxidase-catalyzed hydrogelation for biomedical applications

Hydrogels catalyzed by horseradish peroxidase (HRP) serve as an efficient and effective platform for biomedical applications due to their mild reaction conditions for cells, fast and adjustable gelation rate in physiological conditions, and an abundance of substrates as water-soluble biocompatible polymers.

Homochiral hexanuclear nickel(ii) metallocyclic structures with high activity for the photocatalytic degradation of organic dyes

Two chiral hexanuclear nickel(ii) metallocyclic rings with new chiral ligands exhibit excellent activity for the photocatalytic degradation of organic dyes.

Toxicological Assessment and UV/TiO2-Based Induced Degradation Profile of Reactive Black 5 Dye

In this study, the toxicological and degradation profile of Reactive Black 5 (RB5) dye was evaluated using a UV/TiO₂-based degradation system. Fourier transform infrared spectroscopy (FT-IR), thin layer chromatography (TLC), high-performance liquid chromatography (HPLC) and ultra-performance liquid chromatography coupled with mass spectrometry (UPLC-MS) techniques were used to evaluate the degradation level of RB5. The UV-Vis spectral analysis revealed the disappearance of peak intensity at 599 nm (λmax). The FT-IR spectrum of UV/TiO₂ treated dye sample manifest appearance of new peaks mainly because of the degraded product and/or disappearance of some characteristics peaks which were present in the untreated spectrum. The HPLC profile verified the RB5 degradation subject to the formation of metabolites at different retention times. A stable color removal higher than 96% with COD removal in the range of 74-82.3% was noted at all evaluated dye concentrations. The tentative degradation pathway of RB5 is proposed following a careful analysis of the intermediates identified by UPLC-MS. Toxicity profile of untreated and degraded dye samples was monitored using three types of human cell lines via MTT assay and acute toxicity testing with Artemia salina. In conclusion, the UV/TiO₂-based degradation system could be effectively employed for the remediation of textile wastewater comprising a high concentration of reactive dyes.

Novel characteristics of horseradish peroxidase immobilized onto the polyvinyl alcohol-alginate beads and its methyl orange degradation potential

Herein, we report the immobilization of in-house isolated horseradish peroxidase (HRP) from Armoracia rusticana with novel characteristics. The HRP was immobilized onto the self-fabricated polyvinyl alcohol-alginate (PVA-alginate) beads using sodium nitrate as a cross-linker. The PVA-alginate beads (2.0mm size) developed using 10% PVA and 1.5% sodium alginate showed maximal immobilization yield. The surface morphologies of the PVA-alginate (control) and immobilized-HRP were characterized by scanning electron microscopy (SEM). The immobilized-HRP retained 64.14% of its initial activity after 10 consecutive substrate-oxidation cycles as compared to the free counterpart. Simultaneously, the thermal stability of the immobilized-HRP was significantly enhanced as compared to the free HRP. The enzyme leakage (E_L) assay was performed by storing the immobilized-HRP in phosphate buffer solution for 30days. Evidently, the leakage of immobilized-HRP was recorded to be 6.98% and 14.82% after 15 and 30days of incubation, respectively. Finally, the immobilized-HRP was used for methyl orange (MO) dye degradation in a batch mode. A noticeable decline in spectral shift accompanied by no appearance of a new peak demonstrated the complete degradation of MO. The degraded fragments of MO were scrutinized by ultra-performance liquid chromatography coupled with mass spectrometry (UPLC-MS). A plausible degradation pathway for MO was proposed based on the identified intermediates. In conclusion, the study portrays the PVA-alginate-immobilized-HRP as a cost-effective and industrially desirable green catalyst, for biotechnological at large and industrial in particular, especially for the treatment of textile dyes or dye-containing industrial waste effluents.

NH2Fe3O4@SiO2 supported peroxidase catalyzed H2O2 for degradation of endocrine disrupter from aqueous solution: Roles of active radicals and NOMs

In this work, magnetic Fe₃O₄ was utilized to immobilize horseradish peroxidase (IM-HRP) in order to improve its stability and reusability by crosslinking method process with glutaraldehyde. The physicochemical properties of NH₂Fe₃O₄@SiO₂ and IM-HRP were characterized by powder X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), Thermo-gravimetric Analysis (TGA) and Transmission electron microscopy (TEM). The thermal stability of immobilized-HRP was considerably improved in comparison with free counterpart. The catalytic performance of IM-HRP for estrogens removal from aqueous solution was evaluated, it was found that the presence of natural organic matters (NOM) have no significant effects on E2 removal and the E2 enzyme-degradation reached around 80% when pH = 7.0 with 0.552 × 10^-3 ratio of IM-HRP/H₂O_2. In addition, the active radicals responsible for estrogens degradation were identified with electro-spin resonance spectra (ESR). It was found that immobilization process on Fe₃O₄ showed no adverse effects on catalytic performance on HRP, estrogens degradation could be fitted well with pseudo-second kinetic equation. Estrogens degradation efficiency was reduced in the presence of humic substances. Both O₂^- and OH were detected in IM-HRP catalyzed H₂O₂ system and radicals quenching test indicated O₂^- played a more important role in estrogens removal. IM-HRP exhibited excellent stability and E2 removal efficiency could reach 45.41% after use seven times. Therefore, HRP enzymes immobilized on NH₂Fe₃O₄@SiO₂ by cross-linking method in glutaraldehyde solutions was an effective way to improve stability and reusability of HRP, and which could avoid potential secondary pollution in water environment caused by free HRP after treatment.