Biodegradation of polyethylene microplastics by the marine fungus Zalerion maritimum

Insight on recently discovered PET polyester-degrading enzymes, thermostability and activity analyses

The flexibility and the low production costs offered by plastics have made them crucial to society. Unfortunately, due to their resistance to biological degradation, plastics remain in the environment for an extended period of time, posing a growing risk to life on earth. Synthetic treatments of plastic waste damage the environment and may cause damage to human health. Bacterial and fungal isolates have been reported to degrade plastic polymers in a logistic safe approach with the help of their microbial cell enzymes. Recently, the bacterial strain Ideonella sakaiensis (201-F6) was discovered to break down and assimilate polyethylene terephthalate (PET) plastic via metabolic processes at 30 °C to 37 °C. PETase and MHETase enzymes help the bacterium to accomplish such tremendous action at lower temperatures than previously discovered enzymes. In addition to functioning at low temperatures, the noble bacterium's enzymes have amazing qualities over pH and PET plastic degradation, including a shorter period of degradation. It has been proven that using the enzyme PETase, this bacterium hydrolyzes the ester linkages of PET plastic, resulting in production of terephthalic acid (TPA), nontoxic compound and mono-2-hydroxyethyl (MHET), along with further depolymerization of MHET to release ethylene glycogen (EG) and terephthalic acid (TPA) by the second enzyme MHETase. Enzymatic plastic degradation has been proposed as an environmentally friendly and long-term solution to plastic waste in the environment. As a result, this review focuses on the enzymes involved in hydrolyzing PET plastic polymers, as well as some of the other microorganisms involved in plastic degradation.

Photodegradation of polyethylene debris in water by sulfur-doped TiO2: system optimization, degradation mechanism, and reusability

Given the immense threats of microplastics, we herein investigate photodegrading the debris of polyethylene bags (PBs) by sulfur-doped titanium dioxide. The optimization of operating parameters showed that controlling the water pH at 3 and introducing PBs by 0.10 g/L under a catalyst dose of 1.25 g/L reduced the polyethylene mass by 3.10% in 7 h, whereas raising the catalyst dose to 3 g/L improved the mass reduction to 4.72%. The extension of degradation time to 100 h at pH 3, catalyst dosage of 3 g/L, and PBs concentration of 0.10 g/L increased the mass loss ratio to 21.74%. Scanning electron microscopy of PBs after 100 h of photodegradation showed cracks on the surface accompanied by the increase of carbonyl index from 0.52 to 1.41 confirming the breakdown of the polymeric chain. Total organic carbon increased from 0.80 to 7.76 mg/L in the first 10 h of photodegradation, then decreased to 1 mg/L after extending the reaction time to 100 h due to the mineralization of organic intermediates generated from the photodegradation of PBs. Trapping tests exhibited the major role of hydroxyl radicals in the degradation system, and the catalyst showed high stability under five repetitive runs. This study proposes an efficient treatment system that can be implemented on a wider scale utilizing the synthesized catalyst to degrade plastics efficiently before their release to water streams.

Eco-friendly polycaprolactone-bound diatomite filter for the removal of metal ions and micro/nanoplastics from water

Over the last few decades, pollution levels in aquatic environments due to heavy metal ions and micro/nanoplastics have increased owing to industrial development, causing adverse effects on microorganisms. Adsorbent-based filtration is a well-developed technique for removing contaminants from aquatic environments. However, this technique should be improved from the perspectives of eco-friendliness and cost-effectiveness, as commercial adsorbents require energy-intensive synthesis and post-processing with chelating agents. In this study, an eco-friendly filtration system was developed. This system employs biodegradable, natural materials, such as diatomite to remove metal ions and micro/nanoplastics and polycaprolactone (PCL) to make the free-form shapes. The filter removes metal ions via adsorption and micro/nanoplastics via physical size filtration and adsorption. This PCL-bound diatomite filter was fabricated from a mixture of acetone, PCL, and diatomite, varying its size, thickness, shape, and stacking number for a particular objective and usage. The adsorption capacity, kinetics, and permeation flux of the membrane were measured, and the stacking number of the membranes were optimized to maximize the removal efficiency of the target contaminants. This filter is completely biodegradable, as indicated by the degradation of the PCL binder within 60 days in water, without any treatment. The degradable, eco-friendly PCL-bound diatomite filter is a low-cost and sustainable component that can be utilized in various applications, especially potable drinking water production from river in developing country and filtering the micro/nanoplastics from the commercially bottled drinking water in daily life.

Harvesting marine plastic pollutants-derived renewable energy: A comprehensive review on applied energy and sustainable approach

The inevitable use of plastics in the existing standard of life makes its way to ecosystems, predominantly into the marine ecosystem. Recent research on energy recycling from marine discarded plastics through biological, chemical, and thermal processes is summarized, which degrade plastic debris and transform it into energy-efficient products. In a system-oriented approach, different boundaries like carbon efficiency, global warming potential, cumulative energy demand, and cost of the product have been evaluated. Even these technologies may successfully reduce the yearly volume of marine plastics by up to 89% while reducing greenhouse gas emissions by 30%. Conversely, recycling a ton of marine discarded plastics may save 915 cubic feet of landfill space, 6500 kWh of energy, and barrels of oil. Energy may be recovered up to 79% from waste plastics using various techniques. Up to 84% liquid fuel had been generated, with a maximum calorific power of 45 MJ/kg. It has been shown that in Asian countries, the power generation capacity of throw-away facemask wastes regularly varies from 2256 kWh/day to 18.52 million kWh/day. Hence, the conversion of marine plastics into biofuel, syngas, biochar, hydrocarbons, electricity, and value-added functional materials by various biotechnological and chemical processes like biodegradation, pyrolysis, gasification, methanolysis, and hydrolysis should be improvised as a source of alternative energy in the immediate future. Our review signifies the potential benefits of energy harvesting technologies from marine plastics pollutants to overcome the growing challenge of energy demands and provide a long-term solution to underdeveloped and developing countries as a sustainable source of energy. Endorsing current strategies to harvest energy from marine plastic wastes that enhance power generation technologies will help in building a more sustainable and greener environment that imparts a healthy and circular economy while shielding natural resources.

Surface functional groups and biofilm formation on microplastics: Environmental implications

Microplastics (MPs) contamination is becoming a significant environmental issue, as the widespread omnipresence of MPs can cause many adverse consequences for both ecological systems and humans. Contrary to what is commonly thought, the toxicity-inducing MPs are not the original pristine plastics; rather, they are completely transformed through various surface functional groups and aggressive biofilm formation on MPs via aging or weathering processes. Therefore, understanding the impacts of MPs' surface functional groups and biofilm formation on biogeochemical processes, such as environmental fate, transport, and toxicity, is crucial. In this review, we present a comprehensive summary of the distinctive impact that surface functional groups and biofilm formation of MPs have on their significant biogeochemical behavior in various environmental media, as well as their toxicity and biological effects. We place emphasis on the role of surface functional groups and biofilm formation as a means of influencing the biogeochemical processes of MPs. This includes their effects on pollutant fate and element cycling, which in turn impacts the aggregation, transport, and toxicity of MPs. Ultimately, future research studies and tactics are needed to improve our understanding of the biogeochemical processes that are influenced by the surface functional groups and biofilm formation of MPs.

Microplastics removal technologies from aqueous environments: a systematic review

Purpose

Pollution of the environment with all kinds of plastics has become a growing problem. The problem of microplastics is mainly due to the absorption of stable organic pollutants and metals into them, and as a result, their environmental toxicity increases. The main purpose of this study is to investigate the appropriate and efficient methods of removing microplastics from aqueous environments through a systematic review.

Methods

Present study designed according to PRISMA guidelines. Two independent researchers followed all process from search to final analysis, for the relevant studies using international databases of PubMed, Scopus and ISI/WOS (Web of Science), without time limit. The search strategy developed based on the main axis of "microplastics", "aqueous environments" and "removal". This research was carried out from 2017 until the March of 2022. All relevant observational, analytical studies, review articles, and a meta-analysis were included.

Results

Through a comprehensive systematic search we found 2974 papers, after running the proses of refining, 80 eligible papers included to the study. According to the results of the review, the methods of removing microplastics from aquatic environments were divided to physical (12), chemical (18), physicochemical (27), biological (12) and integrated (11) methods. In different removal methods, the most dominant group of studied microplastics belonged to the four groups of polyethylene (PE), polystyrene (PS), polypropylene (PP) and polyethylene tetra phthalate (PET). Average removal efficiency of microplastics in different processes in each method was as: physical method (73.76%), chemical method (74.38%), physicochemical method (80.44%), biological method (75.23%) and integrated method (88.63%). The highest removal efficiency occurred in the processes based on the integrated method and the lowest efficiency occurred in the physical method. In total, 80% of the studies were conducted on a laboratory scale, 18.75% on a full scale and 1.25% on a pilot scale.

Conclusion

According to the findings; different processes based on physical, chemical, physicochemical, biological and integrated methods are able to remove microplastics with high efficiency from aqueous environments and in order to reduce their hazardous effects on health and environment, these processes can be easily used.

Biodegradation of microplastic in freshwaters: A long-lasting process affected by the lake microbiome

Plastics have been produced for over a century, but definitive evidence of complete plastic biodegradation in different habitats, particularly freshwater ecosystems, is still missing. Using 13 C-labelled polyethylene microplastics (PE-MP) and stable isotope analysis of produced gas and microbial membrane lipids, we determined the biodegradation rate and fate of carbon in PE-MP in different freshwater types. The biodegradation rate in the humic-lake waters was much higher (0.45% ± 0.21% per year) than in the clear-lake waters (0.07% ± 0.06% per year) or the artificial freshwater medium (0.02% ± 0.02% per year). Complete biodegradation of PE-MP was calculated to last 100-200 years in humic-lake waters, 300-4000 years in clear-lake waters, and 2000-20,000 years in the artificial freshwater medium. The concentration of 18:1ω7, characteristic phospholipid fatty acid in Alpha- and Gammaproteobacteria, was a predictor of faster biodegradation of PE. Uncultured Acetobacteraceae and Comamonadaceae among Alpha- and Gammaproteobacteria, respectively, were major bacteria related to the biodegradation of PE-MP. Overall, it appears that microorganisms in humic lakes with naturally occurring refractory polymers are more adept at decomposing PE than those in other waters.

Biodegradation of plastics by white-rot fungi: A review

Plastic pollution is one of the most environmental problems in the last two centuries, because of their excessive usage and their rapidly increasing production, which overcome the ability of natural degradation. Moreover, this problem become an escalating environmental issue caused by inadequate disposal, ineffective or nonexistent waste collection methods, and a lack of appropriate measures to deal with the problem, such as incineration and landfilling. Consequently, plastic wastes have become so ubiquitous and have accumulated in the environment impacting ecosystems and wildlife. The above, enhances the urgent need to explore alternative approaches that can effectively reduce waste without causing harsh environmental consequences. For example, white-rot fungi are a promising alternative to deal with the problem. These fungi produce ligninolytic enzymes able to break down the molecular structures of plastics, making them more bioavailable and allowing their degradation process, thereby mitigating waste accumulation. Over the years, several research studies have focused on the utilization of white-rot fungi to degrade plastics. This review presents a summary of plastic degradation biochemistry by white-rot fungi and the function of their ligninolytic enzymes. It also includes a collection of different research studies involving white-rot fungi to degrade plastic, their enzymes, the techniques used and the obtained results. Also, this highlights the significance of pre-treatments and the study of plastic blends with natural fibers or metallic ions, which have shown higher levels of degradation. Finally, it raises the limitations of the biotechnological processes and the prospects for future studies.

Soil nutrient levels regulate the effect of soil microplastic contamination on microbial element metabolism and carbon use efficiency

Microplastics (MPs) are emerging environmental contaminants in soil ecosystems that disrupt the soil carbon (C) pool. Therefore, the response of microbial metabolism to MP-contaminated soil is crucial for soil-C stabilization. We undertook factorial experiments in a greenhouse with three types of soil microplastics with three levels of soil nutrients and undertook soil physiochemical analyses after 60 days. The present study revealed how the presence of degradable polylactic acid (PLA) and non-degradable polyethylene (PE) MPs affects soil microbial nutrient limitation and C use efficiency (CUE) at varying nutrient concentrations. The presence of PLA in soil with low nutrient levels led to a significant increase (29%) in the activities of nitrogen (N)-acquiring enzymes. In contrast, the presence of MPs had no effect on C- and N-acquiring enzymes. The occurrence of PE caused a 41% reduction in microbial C limitation in high-nutrient soils, and microbial nutrient metabolism was limited by the occurrence of MPs in soils amended with nutrients. A strong positive correlation between microbial C and nutrient limitation in the soil indicates that addressing C limitation followed by amendment of soil with MPs could potentially intensify microbial N limitation in soils with varying nutrients. In comparison, the microbial CUE increased by 10% with the application of degradable MPs (PLA) to soils with a low nutrient status. These findings highlight the significant influence of both degradable PLA and non-degradable PE MPs on soil microbial processes and C dynamics. In conclusion, PLA enhances metabolic efficiency in nutrient-rich soils, potentially aiding C utilization, whereas PE reduces microbial C limitation, offering promise for soil C sequestration strategies. Our findings underscore the importance of considering MPs in soil ecosystem studies and in broader sustainability efforts.

A critical review on remediation of microplastics using microalgae from aqueous system

Microplastics (MPs) are deemed to be a global concern due to their harmful negative effects on the aquatic environment and human beings. MPs have a significant impact on both fresh and marine water ecosystems. In many countries, there is concern about the deleterious consequences of MPs on human health due to the presence of MPs in aquatic life for higher intake of marine food (fish and shellfish). Exposure to MPs causes fish to suffer from growth retardation, neurotoxicity, and behavioural abnormalities and it affects human as well. It causes oxidative stress, neurotoxicity, cytotoxicity, and immune system disruption after being ingested to these contaminated fish in human body. Due to these reasons, it has become imperative to find ways to resolve this problem. This review paper represents a pioneering endeavor by consolidating comprehensive information on microplastic-polluted Indian riverine ecosystems and effective MPs removal methods into a single, cohesive document. It meticulously evaluates the principles, removal efficiency, benefits, and drawbacks of various techniques, aiming to identify the most optimal solution. Furthermore, this paper provides a comprehensive exploration of the interesting interactions between MPs and microalgae, delving into the intricate processes of hetero-aggregation. Additionally, it shines a spotlight on the latest advancements in understanding the efficacy of microalgae in removing MPs, showcasing recent breakthroughs in this field of research. Moreover, the work goes beyond conventional assessments by elucidating the characteristics of MPs and exploring diverse influencing parameters that impact MPs removal by microalgae and also addresses the potential future aspects. This thorough investigation uncovers important factors that could significantly contribute to the development of more efficient and sustainable remediation strategies.

Unveiling the effect of microplastics on agricultural crops - a review

Microplastics (MPs), ever since they were identified as a potential and widely distributed persistent contaminant, the number of studies highlighting their impacts on various terrestrial ecosystems have been increasing. Recently, the effect of MPs on the agricultural ecosystem has gained momentum. Hence, the present review examines the impact of microplastics on agricultural crop systems and the mechanism underlying its toxicity. The current review revealed that most of the studies were conducted at a laboratory scale and under controlled conditions. Additionally, it was observed that polystyrene (PS) followed by polyethylene (PE) are the most studied polymer type, while the most studied plants are wheat and maize. Hitherto, literature studies suggest that the microplastics' influence on plant growth can be negative or sometimes neutral; while in some cases it exerts a hormetic effect which depends on other factors determining plant growth. Notably, the main mechanisms through which microplastics influence plant growth are mechanical damage, alteration of soil properties, or by leaching of additives. Overall, with burgeoning research interest in this aspect, the current review has significant implications for the toxicity of MPs on plants and throws light on the need to develop novel guidelines toward the sustainable use of plastics in agricultural sector. However, realistic field-level studies and estimating the MPs concentration at various region are essential to develop remediation approaches. Future studies should also focus on translocation and accumulation of micron sized MPs in edible portion of crops and their effect on food safety.

Microplastics in the environment: A critical overview on its fate, toxicity, implications, management, and bioremediation strategies

Microplastics are small plastic pieces ranging in size from 1μ to <5 mm in diameter, are water-soluble, and can be either primary as they are initially created in small sizes or secondary as they develop due to plastic degradation. Approximately 360 million tons of plastic are produced globally every year, with only 7% recycled, leaving the majority of waste to accumulate in the environment and pose a serious threat in the form of microplastics. All ecosystems, particularly freshwater ecosystems, experience microplastic accumulation and are also prone to degrading processes. Degraded microplastics accumulate in many aquatic systems, contaminate them, and enter the food chain as a result of the excessive discharge of plastic trash annually from the domestic to the industrial sector. Due to their pervasiveness, these tiny plastic particles are constantly present in freshwater environments, which are essential to human life. In this sense, microplastic pollution is seen as a worldwide problem that has a detrimental impact on every component of the freshwater environment. Microplastics act as carriers for various toxic components such as additives and other hazardous substances from industrial and urbanized areas. These microplastic-contaminated effluents are ultimately transferred into water systems and directly ingested by organisms associated with a particular ecosystem. The microplastics components also pose an indirect threat to aquatic ecosystems by adsorbing surrounding water pollutants. This review mainly focuses on the sources of microplastics, the ecotoxicity of microplastics and the impact microplastics have on aquatic and marine life, management, and bioremediation of microplastics. Policies and strategies adopted by the Government to combat microplastic pollution are also discussed in this review.

Microplastics in the soil environment: Focusing on the sources, its transformation and change in morphology

Microplastics (MPs) are small plastic pieces less than 5 mm in size. Previous studies have focused on the sources, transports, and fates of MPs in marine or sediment environments. However, limited attention has been given to the role of land as the primary source of MPs, and how plastic polymers are transformed into MPs through biological or abiotic effects during the transport process remains unclear. Here, we focus on the exploration of the main sources of MPs in the soil, highlighting that MP generation is not solely a byproduct of plastic production but can also result from the impact of biological and abiotic factors during the process of MPs transport. This review presents a new perspective on understanding the degradation of MPs in soil, considering soil as a distinct fluid and suggesting that the main transformation and change mediated by abiotic factors occur on the soil surface, while the main biodegradation occurs in the soil interior. This viewpoint is suggested because the role of some abiotic factors becomes less obvious in the soil interior, and MPs, whose surface is expected to colonize microorganisms, are gradually considered a carbon source independent of photosynthesis and net primary production. This review emphasizes the need to understand basic MPs information in soil for a rational evaluation of its environmental toxicity. Such understanding enables better control of MPs pollution in affected areas and prevents contamination in unaffected regions. Finally, knowledge gaps and future research directions necessary for advancements in this field are provided.

Human health risk model for microplastic exposure in the Arctic region

Microplastics enriched with carcinogens like heavy metals, polycyclic aromatic hydrocarbons (PAHs), and their derivatives are ubiquitous in Arctic waters. They contaminate the local land and sea-based food sources, which is a significant health hazard. It is thus imperative to assess the risk posed by them to the nearby communities, which primarily rely on locally available food sources to meet their energy requirements. This paper proposes a novel ecotoxicity model to assess the human health risk posed by microplastics. The region's geophysical and environmental conditions affecting human microplastic intake, along with the human physiological parameters influencing biotransformation, are incorporated into the developed causation model. It investigates the carcinogenic risk associated with microplastic intake in humans via ingestion in terms of incremental excess lifetime cancer risk (IELCR). The model first evaluates microplastic intake and then uses reactive metabolites produced due to the interaction of microplastics with xenobiotic metabolizing enzymes to assess cellular mutations that result in cancer. All these conditions are mapped in an Object-Oriented Bayesian Network (OOBN) framework to evaluate IELCR. The study will provide a vital tool for formulating better risk management strategies and policies in the Arctic region, especially concerning Arctic Indigenous peoples.

Control strategies for microplastic pollution in groundwater

Groundwater is the primary source of water that occurs below the earth's surface. However, the advancement in technology and the increasing population, which lead to the discharge of contaminants such as microplastics (MPs), have an adverse impact on the quality of groundwater. MPs are ubiquitous pollutants that are widely found throughout the world. The maximum abundance of MPs is 4 items/L and 15.2 items/L in groundwater at the specific location of China and USA. Various factors can affect the migration of MPs from soil to groundwater. The occurrence of MPs in water causes serious health issues. Therefore, taking appropriate strategies to control MP contamination in groundwater is urgent and important. This review summarizes the current literature on the migration process of MPs from soil to groundwater along with possible methods for the remediation of MP-polluted groundwater. The main objective of the review is to summarize the technical parameters, process, mechanism, and characteristics of various remediation methods and to analyze strategies for controlling MP pollution in groundwater, providing a reference for future research. Possible control strategies for MP pollution in groundwater include two aspects: i) prevention of MPs from entering groundwater; ii) remediation of polluted groundwater with MPs (ectopic remediation and in-situ remediation). Formulating legislative measures, strengthening public awareness and producing more environment-friendly alternatives can be helpful to reduce the production of MPs from the source. Manage plastic waste reasonably is also a good strategy and the most important part of the management is recycling. The shortcomings of the current study and the direction of future research are also highlighted in the review.

Identification of rare microbial colonizers of plastic materials incubated in a coral reef environment

Plastic waste accumulation in marine environments has complex, unintended impacts on ecology that cross levels of community organization. To measure succession in polyolefin-colonizing marine bacterial communities, an in situ time-series experiment was conducted in the oligotrophic coastal waters of the Bermuda Platform. Our goals were to identify polyolefin colonizing taxa and isolate bacterial cultures for future studies of the biochemistry of microbe-plastic interactions. HDPE, LDPE, PP, and glass coupons were incubated in surface seawater for 11 weeks and sampled at two-week intervals. 16S rDNA sequencing and ATR-FTIR/HIM were used to assess biofilm community structure and chemical changes in polymer surfaces. The dominant colonizing taxa were previously reported cosmopolitan colonizers of surfaces in marine environments, which were highly similar among the different plastic types. However, significant differences in rare community composition were observed between plastic types, potentially indicating specific interactions based on surface chemistry. Unexpectedly, a major transition in community composition occurred in all material treatments between days 42 and 56 (p < 0.01). Before the transition, Alteromonadaceae, Marinomonadaceae, Saccharospirillaceae, Vibrionaceae, Thalassospiraceae, and Flavobacteriaceae were the dominant colonizers. Following the transition, the relative abundance of these taxa declined, while Hyphomonadaceae, Rhodobacteraceae and Saprospiraceae increased. Over the course of the incubation, 8,641 colonizing taxa were observed, of which 25 were significantly enriched on specific polyolefins. Seven enriched taxa from families known to include hydrocarbon degraders (Hyphomonadaceae, Parvularculaceae and Rhodobacteraceae) and one n-alkane degrader (Ketobacter sp.). The ASVs that exhibited associations with specific polyolefins are targets of ongoing investigations aimed at retrieving plastic-degrading microbes in culture.

Effects of biodegradable-based microplastics in Paracentrotus lividus Lmk embryos: Morphological and gene expression analysis

Plastic pollution is a remarkable environmental issue. In fact, plastic is widespread in the lifetime and serious environmental problems are caused by the improper management of plastic end of life, being plastic litter detected in any environment. Efforts are put to implement the development of sustainable and circular materials. In this scenario, biodegradable polymers, BPs, are promising materials if correctly applied and managed at the end of life to minimize environmental problems. However, a lack of data on BPs fate and toxicity on marine organisms, limits their applicability. In this research, the impact of microplastics obtained from BPs, BMPs, were analyzed on Paracentrotus lividus. Microplastics were produced from five biodegradable polyesters at laboratory scale by milling the pristine polymers, under cryogenic conditions. Morphological analysis of P. lividus embryos exposed to polycaprolactone (PCL), polyhydroxy butyrate (PHB) and polylactic acid (PLA) showed their delay and malformations, which at molecular level are due to variation in expression levels of eighty-seven genes involved in various cellular processes, such as skeletogenesis, differentiation and development, stress, and detoxification response. Exposure to poly(butylene succinate) (PBS) and poly(butylene succinate-co-adipate) (PBSA) microplastics showed no detectable effects on P. lividus embryos. These findings contribute with important data on the effect of BPs on the physiology of marine invertebrates.

Current studies on the degradation of microplastics in the terrestrial and aquatic ecosystem

Soil and water are two important basic ecosystems for the survival of different organisms. The excessive microplastic pollutants in soil have been directly discharged into the terrestrial ecosystems. Microplastic pollutants (MPs) constitute a ubiquitous global menace due to their durability, flexibility, and tough nature. MPs posed threat to the sustainability of the ecosystem due to their small size and easy transportation via ecological series resulting in the accumulation of MPs in aquatic and terrestrial ecosystems. After being emitted into the terrestrial ecosystem, the MPs might be aged by oxidative degeneration (photo/thermal), reprecipitation (bioturbation), and hetero-accumulation. The mechanism of adsorption, degradation, and breakdown of MPs into unaffected plastic debris is accomplished by using several biological, physical, and chemical strategies. This review presents the importance of ecosystems, occurrence and sources of MPs, its toxicity, and the alteration in the ecology of the ecosystems. The inhibitory impact of MPs on the ecosystems also documents to unveil the ecological hazards of MPs. Further research is required to study the immobilization and recovery efficiency of MPs on a larger scale.

Degradation mechanism of microplastics and potential risks during sewage sludge co-composting: A comprehensive review

Microplastics (MPs) as a kind of emerging contaminants, widely exists in various kinds of medium, sewage sludge (SS) is no exception. In the sewage treatment process, a large number of microplastics will be deposited in SS. More seriously, microplastics in sewage sludge can migrate to other environmental media and threaten human health. Therefore, it is necessary to remove MPs from SS. Among the various restorations, aerobic composting is emerging as a green microplastic removal method. There are more and more reports of using aerobic compost to degrade microplastics. However, there are few reports on the degradation mechanism of MPs in aerobic composting, hindering the innovation of aerobic composting methods. Therefore, in this paper, the degradation mechanism of MPs in SS is discussed based on the environmental factors such as physical, chemical and biological factors in the composting process. In addition, this paper expounds the MPs in potential hazards, and combined with the problems in the present study were studied the outlook.

Differences in microplastic degradation in the atmosphere and coastal water environment from two island nations: Japan and New Zealand

Microplastics are subject to environmental forces that can change polymer organization on a molecular scale. However, it is not clear to what extent these changes occur in the environment and whether microplastics in the atmospheric and water environment differ. Here we identify structural differences between microplastics in the atmosphere and water environment from Japan and New Zealand, representing two archipelagos differing in their proximity to nearby countries and highly populated areas. We first highlight the propensity for smaller microplastics to arrive via air masses from the Asian continent to the Japan Sea coastal area, while New Zealand received larger, locally derived microplastics. Analyses of polyethylene in the Japanese atmosphere indicate that microplastics transported to the Japanese coastal areas were more crystalline than polyethylene particles in the water, suggesting that the plastics arriving by air were relatively more aged and brittle. By contrast, polypropylene particles in New Zealand waters were more degraded than the microplastic particles in the air. Due to the lack of abundance, both polyethylene and polypropylene could not be analyzed for both countries. Nevertheless, these findings show the structural variation in microplastics between environments in markedly different real-world locations, with implications for the toxic potential of these particles.

Plastics shape the black soldier fly larvae gut microbiome and select for biodegrading functions

BACKGROUND

In the last few years, considerable attention has been focused on the plastic-degrading capability of insects and their gut microbiota in order to develop novel, effective, and green strategies for plastic waste management. Although many analyses based on 16S rRNA gene sequencing are available, an in-depth analysis of the insect gut microbiome to identify genes with plastic-degrading potential is still lacking.

RESULTS

In the present work, we aim to fill this gap using Black Soldier Fly (BSF) as insect model. BSF larvae have proven capability to efficiently bioconvert a wide variety of organic wastes but, surprisingly, have never been considered for plastic degradation. BSF larvae were reared on two widely used plastic polymers and shotgun metagenomics was exploited to evaluate if and how plastic-containing diets affect composition and functions of the gut microbial community. The high-definition picture of the BSF gut microbiome gave access for the first time to the genomes of culturable and unculturable microorganisms in the gut of insects reared on plastics and revealed that (i) plastics significantly shaped bacterial composition at species and strain level, and (ii) functions that trigger the degradation of the polymer chains, i.e., DyP-type peroxidases, multicopper oxidases, and alkane monooxygenases, were highly enriched in the metagenomes upon exposure to plastics, consistently with the evidences obtained by scanning electron microscopy and 1H nuclear magnetic resonance analyses on plastics.

CONCLUSIONS

In addition to highlighting that the astonishing plasticity of the microbiota composition of BSF larvae is associated with functional shifts in the insect microbiome, the present work sets the stage for exploiting BSF larvae as "bioincubators" to isolate microbial strains and enzymes for the development of innovative plastic biodegradation strategies. However, most importantly, the larvae constitute a source of enzymes to be evolved and valorized by pioneering synthetic biology approaches. Video Abstract.

Microplastics: a review of their impacts on different life forms and their removal methods

The pollution of microplastics (MPs) is a worldwide major concern, as they have become a major part of our food chain. MPs enter our ecosystem via different pathways, including anthropogenic activities and improper disposal of plastics. The aim of this article is to review the current scientific literature related to MPs and how they affect different life forms on earth. Briefly, MPs induced negative effects on humans are primarily linked with the oxidative stress and disruption in immunity. MPs not only affect the soil chemical and physical properties such as reduction in soil health and productivity but also impose harmful effects on soil microorganisms. Moreover, MP-induced plant growth reduction results from three complementary mechanisms: (i) reduction in root and shoot growth, (ii) reduction in photosynthesis accompanied by higher reactive oxygen species (ROS) production, and (iii) reduction in nutrient uptake via altered root growth. Given the negative effects of MPs on different life forms, it is important to remove or remediate them. We have discussed different MP removal methods including coagulation, membrane filtration technology, biochar, and biological degradation of MPs in soil and wastewater effluents. The use of ozone as ultrafiltration technique has also been shown as the most promising technique for MP removal. Finally, some future research recommendations are also put forward at the end to further enhance our understanding of the MPs induced negative effects on different life forms. The flowchart shows the interaction of MPs from water contaminated with MPs with different parts of the ecosystem and final interaction with human health.

Occurrences, sources, fate and impacts of plastic on aquatic organisms and human health in global perspectives: What Bangladesh can do in future?

Bangladesh is not an exception to the growing global environmental problem of plastic pollution. Plastics have been deemed a blessing for today's world thanks to their inexpensive production costs, low weight, toughness, and flexibility, but poor biodegradability and massive misuse of plastics are to blame for widespread contamination of the environmental components. Plastic as well as microplastic pollution and its adverse consequences have attracted significant investigative attention all over the world. Plastic pollution is a rising concern in Bangladesh, but scientific studies, data, and related information are very scarce in numerous areas of the plastic pollution problem. The current study examined the effects of plastic and microplastic pollution on the environment and human health, and it examined Bangladesh's existing knowledge of plastic pollution in aquatic ecosystems in light of the rapidly expanding international research in this field. We also made an effort to investigate the current shortcomings in Bangladesh's assessment of plastic pollution. This study proposed several management approaches to the persistent plastic pollution problem by analyzing studies from industrialized and emerging countries. Finally, this work pushed investigators to investigate Bangladesh's plastic contamination thoroughly and develop guidelines and policies to address the issue.

Recent advances in biodegradation of emerging contaminants - microplastics (MPs): Feasibility, mechanism, and future prospects

Plastics have become an essential part of life. When it enters the environment, it migrates and breaks down to form smaller size fragments, which are called microplastics (MPs). Compared with plastics, MPs are detrimental to the environment and pose a severe threat to human health. Bioremediation is being recognized as the most environmentally friendly and cost-effective degradation technology for MPs, but knowledge about the biodegradation of MPs is limited. This review explores the various sources of MPs and their migration behavior in terrestrial and aquatic environments. Among the existing MPs removal technologies, biodegradation is considered to be the best removal strategy to alleviate MPs pollution. The biodegradation potential of MPs by bacteria, fungi and algae is discussed. Biodegradation mechanisms such as colonization, fragmentation, assimilation, and mineralization are presented. The effects of MPs characteristics, microbial activity, environmental factors and chemical reagents on biodegradation are analyzed. The susceptibility of microorganisms to MPs toxicity might lead to decreased degradation efficiency, which is also elaborated. The prospects and challenges of biodegradation technologies are discussed. Eliminating prospective bottlenecks is necessary to achieve large-scale bioremediation of MPs-polluted environment. This review provides a comprehensive summary of the biodegradability of MPs, which is crucial for the prudent management of plastic waste.

Polyethylene degradation and assimilation by the marine yeast Rhodotorula mucilaginosa

Ocean plastic pollution is a severe environmental problem but most of the plastic that has been released to the ocean since the 1950s is unaccounted for. Although fungal degradation of marine plastics has been suggested as a potential sink mechanism, unambiguous proof of plastic degradation by marine fungi, or other microbes, is scarce. Here we applied stable isotope tracing assays with 13C-labeled polyethylene to measure biodegradation rates and to trace the incorporation of plastic-derived carbon into individual cells of the yeast Rhodotorula mucilaginosa, which we isolated from the marine environment. 13C accumulation in the CO2 pool during 5-day incubation experiments with R. mucilaginosa and UV-irradiated 13C-labeled polyethylene as a sole energy and carbon source translated to degradation rates of 3.8% yr-1 of the initially added substrate. Furthermore, nanoSIMS measurements revealed substantial incorporation of polyethylene-derived carbon into fungal biomass. Our results demonstrate the potential of R. mucilaginosa to mineralize and assimilate carbon from plastics and suggest that fungal plastic degradation may be an important sink for polyethylene litter in the marine environment.

Discovering untapped microbial communities through metagenomics for microplastic remediation: recent advances, challenges, and way forward

Microplastics (MPs) are ubiquitous pollutants persisting almost everywhere in the environment. With the increase in anthropogenic activities, MP accumulation is increasing enormously in aquatic, marine, and terrestrial ecosystems. Owing to the slow degradation of plastics, MPs show an increased biomagnification probability of persistent, bioaccumulative, and toxic substances thereby creating a threat to environmental biota. Thus, remediation of MP-pollutants requires efficient strategies to circumvent the mobilization of contaminants leaching into the water, soil, and ultimately to human beings. Over the years, several microorganisms have been characterized by the potential to degrade different plastic polymers through enzymatic actions. Metagenomics (MGs) is an effective way to discover novel microbial communities and access their functional genetics for the exploration and characterization of plastic-degrading microbial consortia and enzymes. MGs in combination with metatranscriptomics and metabolomics approaches are a powerful tool to identify and select remediation-efficient microbes in situ. Advancement in bioinformatics and sequencing tools allows rapid screening, mining, and prediction of genes that are capable of polymer degradation. This review comprehensively summarizes the growing threat of microplastics around the world and highlights the role of MGs and computational biology in building effective response strategies for MP remediation.

Combinational exposure to hydroxyatrazine increases neurotoxicity of polystyrene nanoparticles on Caenorhabditis elegans

Using Caenorhabditis elegans as an animal model, we investigated combinational effect between 2-hydroxyatrazine (HA) and polystyrene nanoparticle (PS-NP) on function and development of D-type motor neurons. Exposure to HA (10 and 100 μg/L) alone caused decreases in body bend, head thrash, and forward turn and increase in backward turn. Exposure to 100 μg/L HA also caused neurodegeneration of D-type motor neurons. Moreover, combinational exposure to HA (0.1 and 1 μg/L) induced enhancement in PS-NP (10 μg/L) toxicity in inhibiting body bend, head thrash, and forward turn, and in increasing backward turn. In addition, combinational exposure to HA (1 μg/L) could result in neurodegeneration of D-type motor neurons in PS-NP (10 μg/L) exposed nematodes. Combinational exposure to HA (1 μg/L) and PS-NP (10 μg/L) increased expressions of crt-1, itr-1, mec-4, asp-3, and asp-4, which govern the induction of neurodegeneration. Moreover, combinational exposure to HA (0.1 and 1 μg/L) strengthened PS-NP (10 μg/L)-induced decreases in glb-10, mpk-1, jnk-1, and daf-7 expressions, which encode neuronal signals regulating response to PS-NP. Therefore, our results demonstrated the effect of combinational exposure to HA and nanoplastics at environmentally relevant concentrations in causing toxic effect on nervous system in organisms.

Insights into the mechanisms involved in the fungal degradation of plastics

Fungi are considered among the most efficient microbial degraders of plastics, as they produce salient enzymes and can survive on recalcitrant compounds with limited nutrients. In recent years, studies have reported numerous species of fungi that can degrade different types of plastics, yet there remain many gaps in our understanding of the processes involved in biodegradation. In addition, many unknowns need to be resolved regarding the fungal enzymes responsible for plastic fragmentation and the regulatory mechanisms which fungi use to hydrolyse, assimilate and mineralize synthetic plastics. This review aims to detail the main methods used in plastic hydrolysis by fungi, key enzymatic and molecular mechanisms, chemical agents that enhance the enzymatic breakdown of plastics, and viable industrial applications. Considering that polymers such as lignin, bioplastics, phenolics, and other petroleum-based compounds exhibit closely related characteristics in terms of hydrophobicity and structure, and are degraded by similar fungal enzymes as plastics, we have reasoned that genes that have been reported to regulate the biodegradation of these compounds or their homologs could equally be involved in the regulation of plastic degrading enzymes in fungi. Thus, this review highlights and provides insight into some of the most likely regulatory mechanisms by which fungi degrade plastics, target enzymes, genes, and transcription factors involved in the process, as well as key limitations to industrial upscaling of plastic biodegradation and biological approaches that can be employed to overcome these challenges.

Current approaches, and challenges on identification, remediation and potential risks of emerging plastic contaminants: A review

Plastics are widely employed in modern civilization because of their durability, mold ability, and light weight. In the recent decade, micro/nanoplastics research has steadily increased, highlighting its relevance. However, contaminating micro/nanoplastics in marine environments, terrestrial ecosystems, and biological organisms is considered a severe threat to the environmental system. Geographical distribution, migration patterns, etymologies of formation, and ecological ramifications of absorption are just a few topics covered in the scientific literature on environmental issues. Degradable solutions from material science and chemistry are needed to address the micro/nanoplastics problem, primarily to reduce the production of these pollutants and their potential effects. Removing micro/nanoplastics from their discharge points has been a central and effective way to mitigate the adverse pollution effects. In this review, we begin by discussing the hazardous effect on living beings and the identification-characterization of micro/nanoplastics. Then, we provide a summary of the existing degradation strategies, which include bio-degradation and advanced oxidation processes (AOPs), and a detailed discussion of their degradation mechanisms is also represented. Finally, a persuasive summary of the evaluated work and projections for the future of this topic is provided.

Characteristics analysis of plastisphere biofilm and effect of aging products on nitrogen metabolizing flora in microcosm wetlands experiment

The marsh, a significant terrestrial ecosystem, has steadily developed the capacity to act as a microplastics collection place (MPs). Here, 180 days of exposure to three different polymer kinds of plastics: polyethylene (PE), polystyrene (PS), and polyvinyl chloride (PVC), were conducted in miniature wetlands (CWs). Water contact angle (WCA), scanning electron microscopy (SEM), Fourier transform infrared (FTIR), and High-throughput sequencing were used to study the succession of microbial community structure and function on MPs after 0, 90, and 180 days of exposure. The results showed that different polymers were degrading and aging differing degrees; PVC contained new functional groups with the symbols -CC-, -CO-, and -OH, while PE had the biggest range of contact angles (74.0-45.5°). Bacteria colonization was discovered on plastic surfaces, and as time went on, it became increasingly evident that the surfaces' composition had altered, and their hydrophobicity had diminished. The plastisphere's microbial community structure as well as water nitrification and denitrification were altered by MPs. In general, our study created a vertical flow-built wetland environment, monitored the impacts of plastic aging and breakdown products on nitrogen metabolizing microorganisms in wetland water, and offered a reliable site for the screening of plastic-degrading bacteria.

Biodegradation of different types of microplastics: Molecular mechanism and degradation efficiency

Microplastics are widely distributed and a major pollutant in our ecosystem. Microplastics (MPs) are very small size plastic (<5 mm) present in environment, which comes from industrial, agricultural and household wastes. Plastic particles are more durable due to the presence of plasticizers and chemicals or additives. These plastics pollutants are more resistant to degradation. Inadequate recycling and excessive use of plastics lead to a large amount of waste accumulating in the terrestrial ecosystem, causing a risk to humans and animals. Thus, there is an urgent need to control microplastic pollution by employing different microorganisms to overcome this hazardous issue for the environment. Biological degradation depends upon different aspects, including chemical structure, functional group, molecular weight, crystallinity and additives. Molecular mechanisms for degradation of MPs through various enzymes have not extremely studied. It is necessary to degrade the MPs and overcome this problem. This review approaches different molecular mechanisms to degrade different types of microplastics and summarize the degradation efficiency of different types of bacteria, algae and fungal strains. The present study also summarizes the potential of microorganisms to degrade different polymers and the role of different enzymes in degradation of microplastics. To the outstanding of our awareness, this is the first article devoted to the role of microorganisms with their degradation efficiency. Furthermore, it also summarizes the role of intracellular and extracellular enzymes in biological degradation mechanism of microplastics.

Microplastics in aquatic environments: A comprehensive review of toxicity, removal, and remediation strategies

The occurrence of microplastics (MPs) in aquatic environments has been a global concern because they are toxic and persistent and may serve as a vector for many legacies and emerging pollutants. MPs are discharged to aquatic environments from different sources, especially from wastewater plants (WWPs), causing severe impacts on aquatic organisms. This study mainly aims to review the Toxicity of MPs along with plastic additives in aquatic organisms at various trophic compartments and available remediation methods/strategies for MPs in aquatic environments. Occurrences of oxidative stress, neurotoxicity, and alterations in enzyme activity, growth, and feeding performance were identical in fish due to MPs toxicity. On the other hand, growth inhibition and ROS formation were observed in most of the microalgae species. In zooplankton, potential impacts were acceleration of premature molting, growth retardation, mortality increase, feeding behaviour, lipid accumulation, and decreased reproduction activity. MPs togather with additive contaminants could also exert some toxicological impacts on polychaete, including neurotoxicity, destabilization of the cytoskeleton, reduced feeding rate, growth, survivability and burrowing ability, weight loss, and high rate of mRNA transcription. Among different chemical and biological treatments for MPs, high removal rates have been reported for coagulation and filtration (>86.5 %), electrocoagulation (>90 %), advanced oxidation process (AOPs) (30 % to 95 %), primary sedimentation/Grit chamber (16.5 % to 58.84 %), adsorption removal technique (>95 %), magnetic filtration (78 % to 93 %), oil film extraction (>95 %), and density separation (95 % to 100 %). However, desirable extraction methods are required for large-scale research in MPs removal from aquatic environments.

Activation of FGF signal in germline mediates transgenerational toxicity of polystyrene nanoparticles at predicted environmental concentrations in Caenorhabditis elegans

Nanoplastics in the environment could cause the ecological and health risks. Recently, the transgenerational toxicity of nanoplastic has been observed in different animal models. In this study, using Caenorhabditis elegans as an animal model, we aimed to examine the role of alteration in germline fibroblast growth factor (FGF) signal in mediating the transgenerational toxicity of polystyrene nanoparticle (PS-NP). Exposure to 1-100 μg/L PS-NP (20 nm) induced transgenerational increase in expressions of germline FGF ligand/EGL-17 and LRP-1 governing FGF secretion. Germline RNAi of egl-17 and lrp-1 resulted in resistance to transgenerational PS-NP toxicity, indicating the requirement of FGF ligand activation and secretion in formation of transgenerational PS-NP toxicity. Germline overexpression of EGL-17 increased expression of FGF receptor/EGL-15 in the offspring, and RNAi of egl-15 at F1 generation (F1-G) inhibited transgenerational toxicity of PS-NP exposed animals overexpressing germline EGL-17. EGL-15 functions in both the intestine and the neurons to control transgenerational PS-NP toxicity. Intestinal EGL-15 acted upstream of DAF-16 and BAR-1, and neuronal EGL-15 functioned upstream of MPK-1 to control PS-NP toxicity. Our results suggested the important role of activation in germline FGF signal in mediating the induction of transgenerational toxicity in organisms exposed to nanoplastics in the range of μg/L.

Role of organisms and their enzymes in the biodegradation of microplastics and nanoplastics: A review

Microplastic (MP) and Nanoplastic (NP) contamination have become a critical ecological concern due to their persistent presence in every aspect of the ecosystem and their potentially harmful effects. The current approaches to eradicate these wastes by burning up and dumping adversely impact the environment, while recycling has its own challenges. As a result, applying degradation techniques to eliminate these recalcitrant polymers has been a focus of scientific investigation in the recent past. Biological, photocatalytic, electrocatalytic, and, recently, nanotechnologies have been studied to degrade these polymers. Nevertheless, it is hard to degrade MPs and NPs in the environment, and these degradation techniques are comparatively inefficient and require further development. The recent research focuses on the potential use of microbes to degrade MPs and NPs as a sustainable solution. Therefore, considering the recent advancements in this important research field, this review highlights the utilization of organisms and enzymes for the biodegradation of the MPs and NPs with their probable degradation mechanisms. This review provides insight into various microbial entities and their enzymes for the biodegradation of MPs. In addition, owing to the lack of research on the biodegradation of NPs, the perspective of applying these processes to NPs degradation has also been looked at. Finally, a critical evaluation of the recent development and perspective for future research to improve the effective removal of MPs and NPs in the environment through biodegradation is also discussed.

Exposure to polypropylene microplastics via diet and water induces oxidative stress in Cyprinus carpio

The occurrence of accumulation of microplastics in humans and wildlife has become a serious concern on a global scale, especially in the last decade. Although there are many studies on microplastics, their biological effects and toxicity on freshwater fish have not been fully revealed. In order to evaluate the potential toxic effects of PP (polypropylene) microplastics in freshwater fish, we performed 1-day, 2-day, 3-day, 4-day, 5-day, 6-day, and 7-day microplastic exposure to different concentrations of the microplastics through water and diet on Cyprinus carpio. Fish samples were divided into 3 groups; Group-A with different PP microplastic concentrations in their water (A_Low:1.0 g/L and A_High:2.5 g/L), Group-B with different PP microplastic concentrations in their diet (B_Low:100 mg/g and B_High:250 mg/g), and Group-C (Control group) free of PP microplastics in their diet and water. The results showed that although microplastics did not cause death in C. carpio, they caused oxidative stress in comparing the MP exposed groups to the control groups. When indices of oxidative stress of fish individuals in all treatment groups were compared with the control group, it was determined that MDA (malondialdehyde) and GSH (glutathione) levels increased, while TPC (total protein content) and CAT (catalase) levels decreased depending on the concentrations and exposure times. Significant differences were observed between the control and treatment groups in the indices of oxidative stress (P<0.05). This study provided basic toxicological data to elucidate and quantify the effects of PP microplastics on freshwater fish. In addition, this study is the first study to indicate that microplastic exposure of carp via diet and water causes oxidative stress in gill tissues and causes changes in CAT, MDA, GSH, and TPC levels. The findings also provide useful reference data for improving knowledge of the effects of microplastics on organisms in freshwater systems.

Plastisphere composition in a subtropical estuary: Influence of season, incubation time and polymer type on plastic biofouling

Plastics are abundant artificial substrates in aquatic systems that host a wide variety of organisms (the plastisphere), including potential pathogens and invasive species. Plastisphere communities have many complex, but not well-understood ecological interactions. It is pivotal to investigate how these communities are influenced by the natural fluctuations in aquatic ecosystems, especially in transitional environments such as estuaries. Further study is needed in sub-tropical regions in the Southern Hemisphere, where plastic pollution is ever increasing. Here we applied DNA-metabarcoding (16S, 18S and ITS-2) as well Scanning Electron Microscopy (SEM) to assess the diversity of the plastisphere in the Patos Lagoon estuary (PLE), South Brazil. Through a one-year in situ colonization experiment, polyethylene (PE) and polypropylene (PP) plates were placed in shallow waters, and sampled after 30 and 90 days within each season. Over 50 taxa including bacteria, fungi and other eukaryotes were found through DNA analysis. Overall, the polymer type did not influence the plastisphere community composition. However, seasonality significantly affected community composition for bacteria, fungi and general eukaryotes. Among the microbiota, we found Acinetobacter sp., Bacillus sp., and Wallemia mellicola that are putative pathogens of aquatic organisms, such as algae, shrimp and fish, including commercial species. In addition, we identified organisms within genera that can potentially degrade hydrocarbons (e.g. Pseudomonas and Cladosporium spp). This study is the first to assess the full diversity and variation of the plastisphere on different polymers within a sub-tropical southern hemisphere estuary, significantly expanding knowledge on plastic pollution and the plastisphere in estuarine regions.

Gut microbiome of mealworms (Tenebrio molitor Larvae) show similar responses to polystyrene and corn straw diets

BACKGROUND

Some insects can degrade both natural and synthetic plastic polymers, their host and gut microbes play crucial roles in this process. However, there is still a scientific gap in understanding how the insect adapted to the polystyrene (PS) diet from natural feed. In this study, we analyzed diet consumption, gut microbiota responses, and metabolic pathways of Tenebrio molitor larvae exposed to PS and corn straw (CS).

RESULTS

T. molitor larvae were incubated under controlled conditions (25 ± 1 °C, 75 ± 5% humidity) for 30 days by using PS foam with weight-, number-, and size-average molecular weight (Mw, Mn, and Mz) of 120.0, 73.2, and 150.7 kDa as a diet, respectively. The larvae exhibited lower PS consumption (32.5%) than CS (52.0%), and these diets had no adverse effects on their survival. The gut microbiota structures, metabolic pathways, and enzymatic profiles of PS- and CS-fed larvae showed similar responses. The gut microbiota of larvae analysis indicated Serratia sp., Staphylococcus sp., and Rhodococcus sp. were associated with both PS and CS diets. Metatranscriptomic analysis revealed that xenobiotics, aromatic compounds, and fatty acid degradation pathways were enriched in PS- and CS-fed groups; laccase-like multicopper oxidases, cytochrome P450, monooxygenase, superoxidase, and dehydrogenase were involved in lignin and PS degradation. Furthermore, the upregulated gene lac640 in both PS- and CS-fed groups was overexpressed in E. coli and exhibited PS and lignin degradation ability.

CONCLUSIONS

The high similarity of gut microbiomes adapted to biodegradation of PS and CS indicated the plastics-degrading ability of the T. molitor larvae originated through an ancient mechanism that degrades the natural lignocellulose. Video Abstract.

Quantitative analysis of polystyrene microplastic and styrene monomer released from plastic food containers

Since the COVID-19 outbreak, the use of disposable plastics has rapidly increased along with the amount of plastic waste. During fragmentation, microplastics and other chemical substances contained in plastics are released. These then enter humans through food which could be problematic considering their hazardous potential. Polystyrene (PS), which is widely used in disposable containers, releases large amounts of microplastics (MPs), but no studies have investigated the release mechanisms of PS-MPs and simultaneously exposed contaminants. Therefore, in this study, the effects of pH (3, 5, 7, and 9), temperature (20, 50, 80, and 100 °C), and exposure time (2, 4, 6, and 8 h) on MPs release were systematically examined. A quantitative/qualitative study of MPs and styrene monomers was performed using microscopy-equipped Fourier-transformed infrared spectroscopy and gas chromatography-mass spectrometry. The release of PS-MPs (36 items/container) and simultaneously exposed pollutants (SEP), such as ethylene glycol monooleate (EGM), was highest at pH 9, 100 °C, and 6 h, which was proportional to the test temperature and time. Under the same conditions, 2.58 μg/L of styrene monomer migrated to the liquid food simulants. The fragmentation was proceeded by oxidation/hydrolysis and accelerated by increased temperature and exposure time. The strong positive correlation between PS-MPs and SEPs releases at pH and temperature indicates that PS-MPs and SEPs follow the same release process. However, a strongly negative correlation between PS-MPs and styrene monomers at the exposed time shows that styrene migration does not follow the same release process, but does its partition coefficient.

The degradation of single-use plastics and commercially viable bioplastics in the environment: A review

Plastics have become an integral part of human life. Single-use plastics (SUPs) are disposable plastics designed to be used once then promptly discarded or recycled. This SUPs range from packaging and takeaway containers to disposable razors and hotel toiletries. Synthetic plastics, which are made of non-renewable petroleum and natural gas resources, require decades to perpetually disintegrate in nature thus contribute to plastic pollution worldwide, especially in marine environments. In response to these problems, bioplastics or bio-based and biodegradable polymers from renewable sources has been considered as an alternative. Understanding the mechanisms behind the degradation of conventional SUPs and biodegradability of their greener counterpart, bioplastics, is crucial for appropriate material selection in the future. This review aims to provide insights into the degradation or disintegration of conventional single-use plastics and the biodegradability of the different types of greener-counterparts, bioplastics, their mechanisms, and conditions. This review highlights on the biodegradation in the environments including composting systems. Here, the various types of alternative biodegradable polymers, such as bacterially biosynthesised bioplastics, natural fibre-reinforced plastics, starch-, cellulose-, lignin-, and soy-based polymers were explored. Review of past literature revealed that although bioplastics are relatively eco-friendly, their natural compositions and properties are inconsistent. Furthermore, the global plastic market for biodegradable plastics remains relatively small and require further research and commercialization efforts, especially considering the urgency of plastic and microplastic pollution as currently critical global issue. Biodegradable plastics have potential to replace conventional plastics as they show biodegradation ability under real environments, and thus intensive research on the various biodegradable plastics is needed to inform stakeholders and policy makers on the appropriate response to the gradually emerging biodegradable plastics.

Microplastics as an emerging menace to environment: Insights into their uptake, prevalence, fate, and sustainable solutions

The inflated demand for plastic products has led to tremendous rise in plastic debris in different environmental matrices, thereby resulting in plastic pollution. This affects plants, animals, and even humans, as microplastics can enter the food chain and cause several health implications. Microplastics are the small plastic particles (size below 5 mm) that are largely debated nowadays owing to their environmental risk assessment. Their potential to interact with other toxic contaminants, their tendency to be ingested or taken up by living organisms and their longevity is a serious threat to our environment. However, despite wealth of recent information, still there is a gap, particularly in eco-toxicology studies, fate, prevalence and feasible solutions to cope up with the menace of microplastics pollution. This review unravels the environmental fate and behaviour of microplastics as well as their global distribution in the marine and terrestrial environment. Furthermore, we aim to contribute to the international debate on the microplastics global paradigm. We briefly suggest sustainable solutions and recommendations to achieve future research goals on microplastics. Our review reveals some of the newest biological (green algae and modified sponges) and physical (nano-particles and membrane treatment) remediation solutions to eradicate microplastics from different types of environment. This review presents a critical evaluation of the state of knowledge of micro-plastics and suggested some recommendations which can help in identifying some important key questions for future research.

Microplastic remediation technologies in water and wastewater treatment processes: Current status and future perspectives

Microplastics (MPs) are a type of contaminants produced during the use and disposal of plastic products, which are ubiquitous in our lives. With the high specific surface area and strong hydrophobicity, MPs can adsorb various hazardous microorganisms and chemical contaminants from the environment, causing irreversible damage to our humans. It is reported that the MPs have been detected in infant feces and human blood. Therefore, the presence of MPs has posed a significant threat to human health. It is critically essential to develop efficient, scalable and environmentally-friendly methods to remove MPs. Herein, recent advances in the MPs remediation technologies in water and wastewater treatment processes are overviewed. Several approaches, including membrane filtration, adsorption, chemically induced coagulation-flocculation-sedimentation, bioremediation, and advanced oxidation processes are systematically documented. The characteristics, mechanisms, advantages, and disadvantages of these methods are well discussed and highlighted. Finally, the current challenges and future trends of these methods are proposed, with the aim of facilitating the remediation of MPs in water and wastewater treatment processes in a more efficient, scalable, and environmentally-friendly way.

Diversity, abundance and distribution characteristics of potential polyethylene and polypropylene microplastic degradation bacterial communities in the urban river

Carbon chain microplastics, polyethylene (PE), and polypropylene (PP) are the main types of refractory organics. Compared to heterochain microplastics, PE/PP degrading bacterial community and their distribution characteristics in natural rivers are unclear. In this study, the field in situ experiment and indoor enrichment experiment with PE/PP resin as only carbon sources were conducted for a total period of 1150 days. The microbial degradation of pure PE/PP resin was determined by SEM, FTIR, CLSM, GC-MS, and GPC. The Chao 1 index and Invsimpson index of the bacterial community significantly reduced after a series of incubation, demonstrating that the bacterial community was selectively enriched. Empirical core PE/PP degrading bacteria (C-bacteria) and resuscitated PE/PP degrading bacteria (R-bacteria) were screened based on the variation of the abundance of OTUs, and co-occurrence analysis displayed that C-bacteria presented higher betweenness centrality than R-bacteria. The higher abundance and diversity of R-bacteria in biofilms suggest the presence of many rare or low abundance bacteria in natural rivers that may be potential PE/PP degrading bacteria or PE/PP degrading bacteria to be activated, while the lower abundance and diversity of C-bacteria support the slow degradation rate of PE and PP in waters. Compared to the isolated and indicatory PE/PP degrading bacterial genera, the C-bacteria OTUs or genera enriched in this study displayed higher richness and abundance. Enriched PE/PP degrading bacteria occurred in all sampled sites of the Qinhuai River with higher abundance and standard betweenness centrality in sediments (averaging 0.01354 and 0.44421, respectively) than those in overlying water (averaging 0.00536 and 0.17571, respectively), while the highest abundance of degrading bacteria presented in the eutrophic sediments. Inorganic nitrogen was determined to be significantly correlated with the distribution of PE/PP degrading bacteria in sediments via redundancy analysis. This study provides a new perspective on the natural degradation potential of carbon chain microplastics by microbial communities in rivers.

On the Novel Process of Pristine Microplastic Bio-fragmentation by Zebrafish (Danio rerio)

Microplastics are highly persistent particles that deliberately contaminate our ecosystem. These small-sized particles can pass through filtering systems into the water bodies, affecting various forms of aquatic and terrestrial life. However, little is known about their fragmentation process within the organism's body. In previous studies, commercially available microplastics were used that are rarely found in the environment naturally, hence they cannot mimic the effects on our surroundings. Therefore, using the zebrafish, Danio rerio we have evaluated the process of bio-fragmentation of ingested pristine polyethene microplastics which are widely used in our daily life. We have also examined their faecal pellets through Field Emission Scanning Electron Microscopy (FE-SEM) and Fourier transform infrared spectroscopy (FTIR). Our results show that zebrafish can potentially bio-fragment the pristine microplastic particles into nano-plastic within a short period of 24 h. Additionally, zebrafish cannot recognize the pristine microplastic particles and can ingest them as food. No mortality occurred during the experiment. Thus, we have identified a natural pathway of microplastic bio-fragmentation, introducing an emerging role of zebrafish in biogeochemical cycling and the fate of plastics.

Visible-light induced degradation of diphenyl urea and polyethylene using polythiophene decorated CuFe2O4 nanohybrids

The present work reports facile synthesis of CuFe₂O₄ nanoparticles via co-precipitation method and formulation of its nanohybrids with polythiophene (PTh). The structural and morphological properties were investigated using fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), scanning electron microscopy coupled with energy dispersive spectra (SEM-EDS) and UV-Vis spectroscopy. The band gap was found to decrease with increase in the loading of PTh and was found to be 2.52 eV for 1-PTh/CuFe₂O₄, 2.15 eV for 3-PTh/CuFe₂O₄ and 1.89 eV for 5-PTh/CuFe₂O₄. The nanohybrids were utilized as photocatalysts for visible light induced degradation of diphenyl urea. Diphenyl urea showed 65% degradation using 150 mg catalyst within 120 min. Polyethylene (PE) was also degraded using these nanohybrids under visible light as well as microwave irradiation to compare its catalytic efficiency under both conditions. Almost 50% of PE was degraded under microwave and 22% under visible light irradiation using 5-PTh/CuFe₂O₄. The degraded diphenyl urea fragments were analyzed using LCMS and a tentative mechanism of degradation was proposed.

Evaluation of Lipid Extracts from the Marine Fungi Emericellopsis cladophorae and Zalerion maritima as a Source of Anti-Inflammatory, Antioxidant and Antibacterial Compounds

Marine environments occupy more than 70% of the earth's surface, integrating very diverse habitats with specific characteristics. This heterogeneity of environments is reflected in the biochemical composition of the organisms that inhabit them. Marine organisms are a source of bioactive compounds, being increasingly studied due to their health-beneficial properties, such as antioxidant, anti-inflammatory, antibacterial, antiviral, or anticancer. In the last decades, marine fungi have stood out for their potential to produce compounds with therapeutic properties. The objective of this study was to determine the fatty acid profile of isolates from the fungi Emericellopsis cladophorae and Zalerion maritima and assess the anti-inflammatory, antioxidant, and antibacterial potential of their lipid extracts. The analysis of the fatty acid profile, using GC-MS, showed that E. cladophorae and Z. maritima possess high contents of polyunsaturated fatty acids, 50% and 34%, respectively, including the omega-3 fatty acid 18:3 n-3. Emericellopsis cladophorae and Z. maritima lipid extracts showed anti-inflammatory activity expressed by the capacity of their COX-2 inhibition which was 92% and 88% of inhibition at 200 µg lipid mL-1, respectively. Emericellopsis cladophorae lipid extracts showed a high percentage of inhibition of COX -2 activity even at low concentrations of lipids (54% of inhibition using 20 µg lipid mL-1), while a dose-dependent behaviour was observed in Z. maritima. The antioxidant activity assays of total lipid extracts demonstrated that the lipid extract from E. cladophorae did not show antioxidant activity, while Z. maritima gave an IC20 value of 116.6 ± 6.2 µg mL-1 equivalent to 92.1 ± 4.8 µmol Trolox g-1 of lipid extract in the DPPH• assay, and 101.3 ± 14.4 µg mL-1 equivalent to 106.6 ± 14.8 µmol Trolox g-1 of lipid extract in the ABTS•+ assay. The lipid extract of both fungal species did not show antibacterial properties at the concentrations tested. This study is the first step in the biochemical characterization of these marine organisms and demonstrates the bioactive potential of lipid extracts from marine fungi for biotechnological applications.

Enzymes' Power for Plastics Degradation

Plastics are everywhere in our modern way of living, and their production keeps increasing every year, causing major environmental concerns. Nowadays, the end-of-life management involves accumulation in landfills, incineration, and recycling to a lower extent. This ecological threat to the environment is inspiring alternative bio-based solutions for plastic waste treatment and recycling toward a circular economy. Over the past decade, considerable efforts have been made to degrade commodity plastics using biocatalytic approaches. Here, we provide a comprehensive review on the recent advances in enzyme-based biocatalysis and in the design of related biocatalytic processes to recycle or upcycle commodity plastics, including polyesters, polyamides, polyurethanes, and polyolefins. We also discuss scope and limitations, challenges, and opportunities of this field of research. An important message from this review is that polymer-assimilating enzymes are very likely part of the solution to reaching a circular plastic economy.

Bioremediation of microplastics in freshwater environments: A systematic review of biofilm culture, degradation mechanisms, and analytical methods

Microplastics, defined as particles <5 mm in diameter, are emerging environmental pollutants that pose a threat to ecosystems and human health. Biofilm degradation of microplastics may be an ecologically friendly approach. This review systematically summarises the factors affecting biofilm degradation of microplastics and proposes feasible methods to improve the efficiency of microplastic biofilm degradation. Environmentally insensitive microorganisms were screened, optimized, and commercially cultured to facilitate the practical application of this technology. For strain screening, technology should focus on microorganisms/strains that can modify the hydrophobicity of microplastics, degrade the crystalline zone of microplastics, and metabolise additives in microplastics. The biodegradation mechanism is also described; microorganisms secreting extracellular oxidases and hydrolases are key factors for degradation. Measuring the changes in molecular weight distribution (MWD) enables better analysis of the biodegradation behaviour of microplastics. Biofilm degradation of microplastics has relatively few applications because of its low efficiency; however, enrichment of microplastics in freshwater environments and wastewater treatment plant tailwater is currently the most effective method for treating microplastics with biofilms.

Draft Genome Sequence of Zalerion maritima ATCC 34329, a (Micro)Plastic-Degrading Marine Fungus

Zalerion maritima is a marine fungus that has been studied for the biodegradation of (micro)plastics. Here, we report the draft genome sequence of strain ATCC 34329, which was shown to have a size of 58.4 Mb, a GC content of 44.39%, and 10,802 predicted genes.

Plastic waste management for sustainable environment: techniques and approaches

Excessive exploitation, negligence, non-degradable nature, and physical and chemical properties of plastic waste have resulted in a massive pollution load into the environment. Consequently, plastic entres the food chain and can cause serious health issues in aquatic animals and humans. The present review summarizes currently reported techniques and approaches for the removal of plastic waste. Many techniques, such as adsorption, coagulation, photocatalysis, and microbial degradation, and approaches like reduction, reuse and recycling are potentially in trend and differ from each other in their efficiency and interaction mechanism. Moreover, substantial advantages and challenges associated with these techniques and approaches are highlighted to develop an understanding of the selection of possible ways for a sustainable future. Nevertheless, in addition to the reduction of plastic waste from the ecosystem, many alternative opportunities have also been explored to cash plastic waste. These fields include the synthesis of adsorbents for the removal of pollutants from aqueous and gaseous stream, their utility in clothing, waste to energy and fuel and in construction (road making). Substantial evidence can be observed in the reduction of plastic pollution from various ecosystems. In addition, it is important to develop an understanding of factors that need to be emphasized while considering alternative approaches and opportunities to cash plastic waste (like adsorbent, clothing, waste to energy and fuel). The thrust of this review is to provide readers with a comprehensive overview of the development status of techniques and approaches to overcome the global issue of plastic pollution and the outlook on the exploitation of this waste as resources.

Recent developments in microplastic contaminated water treatment: Progress and prospects of carbon-based two-dimensional materials for membranes separation

Micro (nano)plastics pollution is a noxious menace not only for mankind but also for marine life, as removing microplastics (MPs) is challenging due to their physiochemical properties, composition, and response toward salinity and pH. This review provides a detailed assessment of the MPs pollution in different water types, environmental implications, and corresponding treatment strategies. With the advancement in nanotechnology, mitigation strategies for aqueous pollution are seen, especially due to the fabrication of nanosheets/membranes mostly utilized as a filtration process. Two-dimensional (2D) materials are increasingly used for membranes due to their diverse structure, affinity, cost-effectiveness, and, most importantly, removal efficiency. The popular 2D materials used for membrane-based organic and inorganic pollutants from water mainly include graphene and MXenes however their effectiveness for MPs removal is still in its infancy. Albeit, the available literature asserts a 70- 99% success rate in micro/nano plastics removal achieved through membranes fabricated via graphene oxide (GO), reduced graphene oxide (rGO) and MXene membranes. This review examined existing membrane separation strategies for MPs removal, focusing on the structural properties of 2D materials, composite, and how they adsorb pollutants and underlying physicochemical mechanisms. Since MPs and other contaminants commonly coexist in the natural environment, a brief examination of the response of 2D membranes to MPs removal was also conducted. In addition, the influencing factors regulate MPs removal performance of membranes by impacting their two main operating routes (filtration and adsorption). Finally, significant limitations, research gaps, and future prospects of 2D material-based membranes for effectively removing MPs are also proposed. The conclusion is that the success of 2D material is strongly linked to the types, size of MPs, and characteristics of aqueous media. Future perspectives talk about the problems that need to be solved to get 2D material-based membranes out of the lab and onto the market.