Automated in-tube solid-phase microextraction coupled with liquid chromatography/electrospray ionization mass spectrometry for the determination of beta-blockers and metabolites in urine and serum samples

Simultaneous separation and speciation of inorganic As(III)/As(V) and Cr(III)/Cr(VI) in natural waters utilizing capillary microextraction on ordered mesoporous Al2O3 prior to their on-line determination by ICP-MS

In this paper, a system of flow injection (FI) capillary microextraction (CME) on line coupled with inductively plasma mass spectrometry (ICP-MS) was proposed for simultaneous separation and speciation of inorganic As(III)/As(V) and Cr(III)/Cr(VI) in natural waters. Ordered mesoporous Al2O3 coating was prepared by sol-gel technology and used as CME coating material. Various experimental parameters affecting the capillary microextraction of inorganic arsenic and chromium species have been investigated and optimized. Under the optimized conditions, the limits of detection were 0.7 and 18 ng L(-1) for As(V) and Cr(VI), 3.4 and 74 ng L(-1) for As(III) and Cr(III), respectively, with an enrichment factor of 5 and a sampling frequency of 8h(-1). The relative standard deviations (R.S.D.) were 3.1, 4.0, 2.8 and 3.9% (C=1 ng mL(-1), n=7) for As(V), As(III), Cr(VI) and Cr(III), respectively. The proposed method was successfully applied for the analysis of inorganic arsenic and chromium species in mineral water, tap water and lake water with the recovery of 94-105%. In order to verify the accuracy of the method, two certified reference of GSBZ50027-94 and GSBZ50004-88 water samples were analyzed and the results obtained were in good agreement with the certified values. The ordered mesoporous Al2O3 coated capillary showed an excellent solvent and thermal stability and could be re-used for more than 30 times without decreasing extraction efficiency.

Evaluation of in vitro biotransformation of propranolol with HPLC, MS/MS, and two bioassays

The majority of human drugs enter aquatic systems after ingestion and subsequent excretion in the form of parent compounds and metabolites. Environmental exposure to drug metabolites has not been reported so far. The goal of the present study was to apply the in vitro method of biotransformation of compounds with S9 fraction to the ecotoxicological analysis. beta-adrenoceptor antagonist propranolol was metabolized with S9 rat liver fraction. The parent compound was quantified with HPLC, and the metabolites were identified with QToF MS. Propranolol was metabolized rapidly, during the first hour its level decreased by 80 and 50% of the initial 20 and 100 mg L(-1), respectively. Ten peaks were observed on the HPLC-RF chromatogram. Four peaks were identified with QToF MS/MS propranolol (m/z = 260), N-desisopropylpropranolol (m/z = 218), hydroxypropranolol (m/z = 276), and hydroxy N-desisopropranolol glycol (m/z = 235). Then the ecotoxicity of the reaction mixture was studied with two bioassays Spirotox with the protozoan Spirostomum ambiguum and Thamnotoxkit F with the anostracean crustacean Thamnocephalus platyurus. Propranolol is twofolds more toxic to Spirotox than to Thamnotoxkit F with 24 h-EC50 = 1.77 mg L(-1) and 24 h-LC50 = 3.86 mg L(-1), respectively. No statistically significant differences were found between the toxicity of the reaction mixtures after S9 biotransformation and the propranolol solution. These results indicate that the biological activity of the metabolites is similar to that of the parent drug. The presented method of in vitro biotransformation of drugs with S9 fraction followed by HPLC and ecotoxicity tests, may be used as screening method for evaluation of the toxicity of drug metabolites.

Extracting syringe for extraction of phthalate esters in aqueous environmental samples

The use of the extracting syringe (ESy), a fully automated membrane-based extraction technique, for analysis of phthalate esters in complex aqueous samples has been investigated. The ESy, working as an autosampler that combines the extraction process and injection into the gas chromatograph (GC) in one single step, is placed on top of the GC equipped with a flame ionisation detector. The aqueous samples are loaded in a tray and automatically extracted by employing microporous membrane liquid-liquid extraction principle. After the extraction, the extract is directly injected into the GC's programmable temperature vaporisation injector. Six different phthalate esters were used as model compounds. Four extraction solvents were tested and the addition of sample organic modifier was examined. Toluene was the optimal solvent to use for extraction. Due to the large variation in polarity of phthalate esters, 50% methanol as organic modifier had to be added to the samples so as to extract the most nonpolar phthalate esters; di-2-ethylhexylphthalate and di-n-octylphthalate, whereas the other four relatively polar phthalate esters were extracted from unmodified samples. No significant difference between extraction of river water, leachate water from a landfill and reagent water was noted, except for minor deviations. The extraction time was 20 min for extraction of a 1-mL sample, resulting in a good linearity for all aqueous media investigated, good enrichment factors (54-110 folds) and low LOD values (0.2-10 ng mL(-1)) and relative standard deviation (%R.S.D.; 0.9-3.7%).

Strategies for interfacing solid-phase microextraction with liquid chromatography

Solid-phase microextraction (SPME) techniques are equally applicable to both volatile and non-volatile analytes, but the progress in applications to gas-phase separations has outpaced that of liquid-phase separations. The interfacing of SPME to gas chromatographic equipment has been straight-forward, requiring little modification of existing equipment. The requirement of solvent desorption for non-volatile or thermally labile analytes has, however, proven challenging for interfacing SPME with liquid-phase separations. Numerous options to achieve this have been described in the literature over the past decade, with applications in several different areas of analysis. To date, no single strategy or interface device design has proven optimal. During method development analysts must select the most appropriate interfacing technique among the options available. Out of these options three general strategies have emerged: (1) use of a manual injection interface tee; (2) in-tube SPME; and (3) off-line desorption followed by conventional liquid injection. In addition, there has been interest in coupling SPME directly to electrospray ionisation and matrix-assisted laser desorption ionisation (MALDI) for mass spectrometry. Several examples of each of these strategies are reviewed here, and an overview of their use and application is presented.

Application of solid-phase microextraction in analytical toxicology

Solid-phase microextraction (SPME) is a miniaturized and solvent-free sample preparation technique for chromatographic-spectrometric analysis by which the analytes are extracted from a gaseous or liquid sample by absorption in, or adsorption on, a thin polymer coating fixed to the solid surface of a fiber, inside an injection needle or inside a capillary. In this paper, the present state of practical performance and of applications of SPME to the analysis of blood, urine, oral fluid and hair in clinical and forensic toxicology is reviewed. The commercial coatings for fibers or needles have not essentially changed for many years, but there are interesting laboratory developments, such as conductive polypyrrole coatings for electrochemically controlled SPME of anions or cations and coatings with restricted-access properties for direct extraction from whole blood or immunoaffinity SPME. In-tube SPME uses segments of commercial gas chromatography (GC) capillaries for highly efficient extraction by repeated aspiration-ejection cycles of the liquid sample. It can be easily automated in combination with liquid chromatography but, as it is very sensitive to capillary plugging, it requires completely homogeneous liquid samples. In contrast, fiber-based SPME has not yet been performed automatically in combination with high-performance liquid chromatography. The headspace extractions on fibers or needles (solid-phase dynamic extraction) combined with GC methods are the most advantageous versions of SPME because of very pure extracts and the availability of automatic samplers. Surprisingly, substances with quite high boiling points, such as tricyclic antidepressants or phenothiazines, can be measured by headspace SPME from aqueous samples. The applicability and sensitivity of SPME was essentially extended by in-sample or on-fiber derivatization. The different modes of SPME were applied to analysis of solvents and inhalation narcotics, amphetamines, cocaine and metabolites, cannabinoids, methadone and other opioids, fatty acid ethyl esters as alcohol markers, gamma-hydroxybutyric acid, benzodiazepines, various other therapeutic drugs, pesticides, chemical warfare agents, cyanide, sulfide and metal ions. In general, SPME is routinely used in optimized methods for specific analytes. However, it was shown that it also has some capacity for a general screening by direct immersion into urine samples and for pesticides and other semivolatile substance in the headspace mode.

Simultaneous determination of 6 beta-blockers, 3 calcium-channel antagonists, 4 angiotensin-II antagonists and 1 antiarrhytmic drug in post-mortem whole blood by automated solid phase extraction and liquid chromatography mass spectrometry

A method for the simultaneous determination of the beta-blockers atenolol, sotalol, metoprolol, bisoprolol, propranolol and carvedilol, the calcium-channel antagonists diltiazem, amlodipine and verapamil, the angiotensin-II antagonists losartan, irbesartan, valsartan and telmisartan, and the antiarrhythmic drug flecainide, in whole blood samples from forensic autopsies was developed. Sample clean-up was achieved by precipitation and solid phase extraction (SPE) with a mixed-mode column. Quantification was performed by reversed phase high performance liquid chromatography with positive electrospray ionization mass spectrometric detection (HPLC-MS). The method has been developed and robustness tested by systematically searching for satisfactory conditions using experimental designs including factorial and response surface designs. With the exception of amlodipine, the concentration limit of quantification (cLOQ) covered low therapeutic concentration levels for all the compounds. Within assay precisions and accuracies (bias) were 3.4-21% RSD and from -24 to 21% for the concentration range 1.00-5.00 microM, respectively. Between assay precisions were 4.4-28% RSD for the concentration range from 0.1 to 5 microM and recoveries varied from 9 to 103%. The method is used for determination of cardiovascular drugs in post-mortem whole blood samples from forensic autopsy cases.

Automation of solid-phase microextraction on a 96-well plate format

Studies have been performed assessing the feasibility and characterizing the automation of solid-phase microextraction (SPME) on a multi-well plate format. Four polycyclic aromatic hydrocarbons (PAHs), naphthalene, fluorene, anthracene and fluoranthene, were chosen as test analytes to demonstrate the technique due to their favorable partition coefficients, K(fw), between polydimethylsiloxane (PDMS) extraction phases and water. Four different PDMS configurations were investigated regarding their suitability. These included (i) a PDMS membrane; (ii) a multi-fiber device containing lengths of PDMS-coated flexible wire; (iii) a stainless steel pin covered with silicone hollow fiber membrane and (iv) commercial PDMS-coated flexible metal fiber assemblies. Of these configurations, the stainless steel pin covered with silicone tubing was chosen as a robust alternative. An array of 96 SPME devices that can be placed simultaneously into a 96-well plate was constructed to demonstrate the high-throughput potential when performing multiple microextractions in parallel. Different agitation methods were assessed including magnetic stirring, sonication, and orbital shaking at different speeds. Orbital shaking whilst holding the SPME device in a stationary position provided the optimum agitation conditions for liquid SPME. Once the analytes had been extracted, desorption of the analytes into an appropriate solvent was investigated. Liquid-phase SPME and solvent desorption on the multi-well plate format is shown to be a viable alternative for automated high-throughput SPME analysis compatible with both gas- and liquid-chromatography platforms.

Determination of cortisol in human saliva by automated in-tube solid-phase microextraction coupled with liquid chromatography–mass spectrometry

We developed a simple, rapid, and sensitive method for determination of cortisol levels in human saliva. Cortisol was analyzed by on-line in-tube solid-phase microextraction (SPME) coupled with liquid chromatography-mass spectrometry (LC/MS). Cortisol was separated within 5 min by HPLC using an Eclipse ZDB-C8 column and 1% acetic acid/methanol (50/50, v/v) at a flow rate of 0.2 mL/min. Electrospray ionization conditions in the positive ion mode were optimized for MS detection of cortisol. The optimum in-tube SPME conditions were 20 draw/eject cycles with a sample size of 40 microL using a Supel Q PLOT capillary column as the extraction device. The extracted compounds could be desorbed easily from the capillary by passage of the mobile phase, and no carryover was observed. Using the in-tube SPME LC/MS method, good linearity of the calibration curve (r=0.9977) was obtained in the concentration range 50-2000 pg/mL of cortisol in saliva, and the limit of detection (S/N=3) was 5 pg/mL. The method described here showed 48-fold higher sensitivity than the direct injection method (5 microL injection). The within-run and between-day precisions (relative standard deviations) were below 4.6% and 8.9% (n=5), respectively. This method was applied successfully to the analysis of saliva samples without interference peaks. The recoveries of cortisol spiked into saliva samples were above 95%, and the relative standard deviations were below 6.0%. This method was used to analyze the changes in salivary cortisol level according to stress load.

Analysis of abietic acid and dehydroabietic acid in food samples by in-tube solid-phase microextraction coupled with liquid chromatography-mass spectrometry

A simple and sensitive method for the determination of abietic acid and dehydroabietic acid in food samples was developed using a fully automated method consisting of in-tube solid-phase microextraction (SPME) coupled with liquid chromatography-mass spectrometry (LC/MS). These compounds were separated within 5min by HPLC using an ODS-3 column and 5mM ammonium formate/acetonitrile (10/90, v/v). Electrospray ionization conditions in the negative ion mode were optimized for MS detection of abietic acid and dehydroabietic acid. The optimum in-tube SPME conditions were 20draw/eject cycles of 40microL of sample using a Supel Q PLOT capillary column as an extraction device. The extracted compounds were easily desorbed from the capillary by passage of the mobile phase, and no carryover was observed. Using the in-tube SPME LC/MS method, good linearity of the calibration curve (r>0.9998) was obtained in the concentration range from 0 to 50ng/mL, and the detection limits (S/N=3) of abietic acid and dehydroabietic acid were 2.9 and 2.1pg/mL, respectively. The in-tube SPME method showed above 75-fold greater sensitivity than the direct injection method (5microL injection). This method was applied successfully to analysis of food samples without interference peaks. The recoveries of abietic acid and dehydroabietic acid spiked into liquid samples were above 79%, and the relative standard deviations were below 6.6%. These compounds were detected at ng/mL or ng/g levels in various liquid or solid food samples contacted with paper.

Analysis of estrogens in environmental waters using polymer monolith in-polyether ether ketone tube solid-phase microextraction combined with high-performance liquid chromatography

A simple, rapid and sensitive on-line method for simultaneous determination of four endocrine disruptors (17beta-estradiol, estriol, bisphenol A and 17alpha-ethinylestradiol) in environmental waters was developed by coupling in-tube solid-phase microextraction (SPME) to high-performance liquid chromatography (HPLC) with fluorescence detection (FLD). A poly(acrylamide-vinylpyridine-N,N'-methylene bisacrylamide) monolith, synthesized inside a polyether ether ketone (PEEK) tube, was selected as the extraction medium. To achieve optimum extraction performance, several parameters were investigated, including extraction flow-rate, extraction time, and pH value, inorganic salt and organic solvent content of the sample matrix. By simply filtered with nylon membrane filter and adjusting the pH of samples to 6.0 with phosphoric acid, the sample solution then could be directly injected into the device for extraction. Low detection limits (S/N=3) and quantification limits (S/N=10) of the proposed method were achieved in the range of 0.006-0.10 ng/mL and 0.02-0.35 ng/mL from spiked lake waters, respectively. The calibration curves of four endocrine disruptors showed good linearity ranging from quantification limits to 50 ng/mL with a linear coefficient R(2) value above 0.9913. Good method reproducibility was also found by intra- and inter-day precisions, yielding the RSDs less than 12 and 9.8%, respectively. Finally, the proposed method was successfully applied to the determination of these compounds in several environmental waters.

Determination of sulfonamide antibiotics in wastewater: A comparison of solid phase microextraction and solid phase extraction methods

In recent years, pharmaceutical and personal care products (PPCPs) have been detected in diverse environments (including groundwater, river water, and municipal wastewater). In order to evaluate their environmental impact, PPCPs must first be accurately determined. In this study, we focused on developing methods to accurately determine 10 sulfonamide antibiotics: sulfaguanidine, sulfacetamide, sulfadiazine, sulfathiazine, sulfapyridine, sulfamerazine, sulfamethazine, sulfamethoxazole, sulfadimethoxine, and sulfasalazine. While sulfonamides can easily be determined in pure water, wastewater influent and effluent collected from sewage treatment plants in Burlington and Toronto (Ontario) were found to generate confounding matrix effects. In an effort to overcome these matrix effects, we developed a solid phase microextraction (SPME) method to determine sulfonamides. Of the five different fiber assemblies investigated, the carbowax/divinylbenzene (CW/DVB) fiber produced the optimal response to sulfonamides. The SPME method was further optimized for sorption time (20min), solution salinity (10%, w/v, KCl), pH (4.5), and static desorption time (30min). When compared to solid phase extraction (SPE) using MCX cartridges, we observed that despite having higher MDLs and poorer sensitivity, SPME possessed the advantage of speed and reduced solvent usage. Most importantly, in contrast to SPE, when we applied the SPME method to fortified wastewater samples, we were generally able to accurately determine (i.e., recover) those sulfonamides that were present. Therefore, we conclude that SPME is a viable method for overcoming matrix effects in environmental samples.

Fluorescence determination of metoprolol in human plasma by trilinear decomposition-based calibration techniques

In this study a new spectrofluorimetric method for the direct determination of metoprolol in human plasma is presented and discussed. It is based on the use of fluorescence excitation-emission matrices (EEMs) and second-order calibration performed with parallel factor analysis (PARAFAC) or alternating trilinear decomposition (ATLD). This methodology enables accurate and reliable discrimination of the analyte signal, even in the presence of unknown and uncalibrated fluorescent component(s), which is often referred to as the second-order advantage. No separation or sample pretreatment steps were required. Satisfactory results were obtained. Metoprolol recoveries in plasma were determined as 87+/-2% and 90+/-4% with PARAFAC and ATLD, respectively. All RSD values of intra- and interday assays were below 5%.

Full automation of solid-phase microextraction/on-fiber derivatization for simultaneous determination of endocrine-disrupting chemicals and steroid hormones by gas chromatography–mass spectrometry

A fully automated method using direct immersion solid-phase microextraction (DI-SPME) and headspace on-fiber silylation for simultaneous determinations of exogenous endocrine-disrupting chemicals (EDCs) and endogenous steroid hormones in environmental aqueous and biological samples by gas chromatography-mass spectrometry (GC-MS) was developed and compared to a previously reported manual method. Three EDCs and five endocrine steroid hormones were selected to evaluate this method. The extraction and derivatization time, ion strength, pH, incubation temperature, sample volume, and extraction solvent were optimized. Satisfactory results in pure water were obtained in terms of linearity of calibration curve (R2=0.9932-1.0000), dynamic range (3 orders of magnitude), precision (4-9% RSD), as well as LOD (0.001-0.124 microg L(-1)) and LOQ (0.004-0.413 microg L(-1)), respectively. These results were similar to those obtained using a manual method, and moreover, the precision was improved. This new automated method has been applied to the determinations of target compounds in real samples used in our previous study on a manual SPME method. Exogenous octylphenol (OP), technical grade nonylphenol (t-NP), and diethylstilbestrol (DES) were at 0.13, 5.03, and 0.02 microg L(-1) in river water and 3.76, 13.25, and 0.10 microg L(-1) in fish serum, respectively. Natural steroid hormones estrone (E1), 17beta-estradiol (E2), and testosterone (T) were at 0.19, 0.11, and 6.22 microg L(-1) in river water; and in female fish serum E1, E2, and pregnenolone (PREG) were at 1.37, 1.95, and 6.25 microg L(-1), respectively. These results were confirmed by the manual method. The developed fully automated SPME and on-fiber silylation procedures showed satisfactory applications in environmental analysis and the performances show improved precision and a reduced analysis time compared to the manual method.

Simultaneous derivatization/preconcentration of volatile aldehydes with a miniaturized fiber-packed sample preparation device designed for gas chromatographic analysis

A novel in-needle sample preparation device has been developed for the determination of volatile aldehydes in gaseous samples. The needle device is designed for the gas chromatographic (GC) analysis of aldehydes and ketones commonly found in typical in-house environments. In order to prepare the extraction device, a bundle of polymer-coated filaments was longitudinally packed into a specially designed needle. Derivatization reactions were prompted by 2,4-dinitrophenylhydrazine (NDPH) included in the needle, and so the aldehydes and ketones were derivatized to the corresponding hydrazones and extracted with the extraction needle. A reproducible extraction needle preparation process was established, along with a repeatable derivatization/extraction process that ensures the successful determination of aldehydes. The storage performance of the extraction needle was also evaluated at room temperature for three days. The results demonstrate the successful application of the fiber-packed extraction device to the preparation of a gaseous sample of aldehydes, and the future possibility of applying the extraction device to the analysis of in-house environments.

On-line preconcentration and separation of Co, Ni and Cd via capillary microextraction on ordered mesoporous alumina coating and determination by inductively plasma mass spectrometry (ICP-MS)

In this paper, an ordered mesoporous alumina coating was prepared and applied to capillary microextraction (CME) of trace Co, Ni and Cd for the first time. The coated capillary was used for on-line coupling CME with inductively plasma mass spectrometry (ICP-MS) for the determination of trace metals of Co, Ni and Cd. The porous structure of Al2O3 coating was examined by SEM and TEM. The effects of the extraction parameters including pH, sample flow rate and volume, elution solution and interfering ions on the recovery of analytes have been investigated and optimized. Under the optimized conditions, the limits of detection were 0.33, 1.5 and 1.4 ng L(-1) for Co, Ni and Cd, respectively, with a preconcentration factor of 10 times. The precisions for all investigated elements were 2.7, 4.1 and 2.5% (c=0.05 ng L(-1), n=7), for Co, Ni and Cd, respectively, and the sample frequency was 8 h(-1). The proposed method was successfully applied for the analysis of trace metals in water, rice and urine samples with the recovery of 94-105%. In order to validate the proposed method, two certified reference materials of GBW 0913 human urine and NIES No.10-b rice flour were analyzed, and the determination values are in good agreement with the certified values. The ordered mesoporous Al2O3 coated capillary can be used more than 20 times without decreasing the extraction efficiency.

Determination of fluoroquinolones in eggs using in-tube solid-phase microextraction coupled to high-performance liquid chromatography

A simple, rapid, and sensitive method using in-tube solid-phase microextraction (in-tube SPME) based on poly(methacrylic acid-ethylene glycol dimethacrylate) (MAA-EGDMA) monolith coupled to HPLC with fluorescence and UV detection was developed for the determination of five fluoroquinolones (FQs). Ofloxacin (OFL), norfloxacin (NOR), ciprofloxacin (CIP), enrofloxacin (ENRO), and sarafloxacin (SARA) can be enriched and determined in the spiked eggs and albumins. CIP/ENRO in eggs and albumins of ENRO-treated hens were also studied using the proposed method. Only homogenization, dilution, and centrifugation were required before the sample was supplied to the in-tube microextraction, and no organic solvents were consumed in the procedures. Under the optimized extraction conditions, good extraction efficiency for the five FQs was obtained with no matrix interference in the process of extraction and the subsequent chromatographic separation. The detection limits (S/N=3) were found to be 0.1-2.6 ng g(-1) and 0.2-2.4 ng g(-1) in whole egg and egg albumin, respectively. Good linearity could be achieved over the range 2-500 ng mL(-1) for the five FQs with regression coefficients above 0.9995 in both whole egg and albumin. The reproducibility of the method was evaluated at three concentration levels, with the resulting relative standard deviations (RSDs) less than 7%. The method was successfully applied to the analysis of ENRO and its primary metabolite CIP in the eggs and albumins of ENRO-treated hens.

In-needle extraction device designed for gas chromatographic analysis of volatile organic compounds

A novel in-needle extraction device has been developed for the preconcentration of gaseous organic compounds prior to the determination in gas chromatography (GC). As the extraction medium, a copolymer of methacrylic acid and ethylene glycol dimethacrylate was synthesized. Based on the results in the preliminary experiments, the desorption conditions such as desorption temperature and time have been optimized along with the evaluation of the extraction efficiency. The storage performance of the needle extraction device was also studied. The results clearly demonstrated the excellent extraction performance for typical organic solvents and also suggested the future possibility such as in the applications for the analysis of working environments.

In vivo biotransformation of metoprolol in the horse and on-column esterification of the aminocarboxylic acid metabolite by alcohols during solid phase extraction using mixed mode columns

The in vivo biotransformation of metoprolol tartrate in the thoroughbred racehorse was studied after administration of a single oral dose. Metoprolol and its basic and bifunctional phase I metabolites were isolated from urine and plasma using mixed mode solid phase extraction (SPE) cartridges. The isolates were derivatised as trimethylsilyl ethers and analysed by capillary column gas chromatography--positive ion electron ionisation and ammonia chemical ionisation mass spectrometry. Metabolism was primarily confined to the oxidative transformations of the p-(2-methoxy)ethyl substituent. Metoprolol and five phase I metabolites were detected in horse urine. In common with man, rat and dog, the zwitterionic compound (+/-)-4-(2-hydroxy-3-isopropylaminopropoxy)-phenylacetic acid (H117/04), was the principle metabolite in the horse. This compound was readily isolated from both plasma and urine samples by SPE and, in addition, an unusual on-column esterification of the carboxylic acid moiety by alcohols was observed. Metoprolol and the major aliphatic acid metabolite were detected for about 10 and 40 h, respectively in unhydrolysed urine. After enzymatic hydrolysis, the detection period increased to 15 and 60 h, respectively indicating some phase II metabolism of metoprolol and its metabolites in the horse.

Recent developments in solid-phase microextraction coatings and related techniques

During the last decade, solid-phase microextraction (SPME) has gained widespread acceptance for analyte matrix separation and preconcentration. Relatively few data are currently available dealing with in-house production of fibres with tailor-made properties to be used for SPME, though recently the number of publications evaluating new coatings has been considerably growing. This review, centred on publications that appeared during the last five years, is resuming different approaches which can be used for fibre production and further summarises alternative techniques closely related to SPME, such as in-tube extraction or single-drop microextraction (SDME). The aim is to give the reader a concise overview of recent developments in new coating procedures and materials, including the respective applications.

Quantitation of atenolol, metoprolol, and propranolol in postmortem human fluid and tissue specimens via LC/APCI-MS

Hypertension is a growing medical concern in the United States. With the number of Americans suffering from hypertension increasing, the use of antihypertensives such as beta-blockers is increasing as well. In fact, three beta-blockers - atenolol, metoprolol and propranolol - were among the 200 most prescribed medications in the United States in 2003. Pilots that successfully manage their hypertension can remain certified to fly. The Federal Aviation Administration currently designates approximately 8% of active pilots as "hypertensive with medication". The Civil Aerospace Medical Institute (CAMI) performs toxicological evaluation on victims of fatal aviation accidents. At CAMI beta-blockers are analyzed using gas chromatography with mass spectrometric detection. We have, however, recently developed a liquid chromatography with mass spectrometric detection (LC/MS) method for the simultaneous quantitation of three commonly prescribed beta-blockers, atenolol, metoprolol and propranolol. One advantage of our LC/MS method is the specificity provided by an ion trap MS. Utilizing an ion trap MS, we were able to conduct MS/MS and MS/MS/MS on each analyte. This method also eliminates the time-consuming and costly derivitization step necessary during GC/MS analysis. Additionally, by utilizing this novel method, any concerns about beta-blocker metabolite and/or sample matrix interference are eliminated. The limits of detection for this method ranged from 0.39 to 0.78 ng/mL and the linear dynamic range was generally 1.6-3200 ng/mL. The extraction efficiencies for each analyte ranged from 58% to 82%. This method was successfully applied to postmortem fluid and tissue specimens obtained from victims of three separate aviation accidents.

Fully automated analysis of estrogens in environmental waters by in-tube solid-phase microextraction coupled with liquid chromatography–tandem mass spectrometry

A simple, rapid and sensitive method for the determination of five estrogens, estrone, 17beta-estradiol, estriol, ethynyl estradiol, and diethylstilbestrol, was developed using a fully automated method consisting of in-tube solid-phase microextraction (SPME) coupled with liquid chromatography-tandem mass spectrometry (LC/MS/MS). These estrogens were separated within 8 min by HPLC using an XDB-C8 column and 0.01% ammonia/acetonitrile (60/40, v/v) at a flow rate of 0.2 mL/min. Electrospray ionization conditions in the negative ion mode were optimized for MS/MS detection of the estrogens. The optimum in-tube SPME conditions were 20 draw/eject cycles of 40 microL of sample using a Supel-Q PLOT capillary column as an extraction device. The extracted compounds were easily desorbed from the capillary by passage of the mobile phase, and no carryover was observed. Using the in-tube SPME LC/MS/MS method, good linearity of the calibration curve (r > or = 0.9996) was obtained in the concentration range from 10 to 200 pg/mL for all compounds examined. The limits of detection (S/N= 3) of the five estrogens examined ranged from 2.7 to 11.7 pg/mL. The in-tube SPME method showed 34-90-fold higher sensitivity than the direct injection method (5 microL injection). This method was applied successfully to the analysis of environmental water samples without any other pretreatment and interference peaks. Several surface water and wastewater samples were collected from the area around Asahi River, and estriol was detected at 35.7 pg/mL in the effluent of a sewage treatment plant. The recoveries of estrogens spiked into river waters were above 86%, except for estriol, and the relative standard deviations were below 0.9-8.8%.

Poly(methacrylic acid-ethylene glycol dimethacrylate) monolith in-tube solid phase microextraction coupled to high performance liquid chromatography and analysis of amphetamines in urine samples

In-tube solid-phase microextraction (SPME) based on a poly(methacrylic acid-ethylene glycol dimethacrylate) monolithic capillary column was investigated for the extraction of amphetamine, methamphetamine and their methylenedioxy derivatives. The monolithic capillary column showed high extraction efficiency towards target analytes, which could be attributed to its larger loading amount of extraction phase than conventional open-tubular extraction capillaries and the convective mass transfer procedure provided by its monolithic structure. The extraction mechanism was studied, and the results indicated that the extraction process of the target analytes was involved with hydrophobic interaction and ion-exchange interaction. The polymer monolith in-tube SPME-HPLC system with UV detection was successfully applied to the determination of amphetamine, methamphetamine and their methylenedioxy derivatives in urine samples, yielding the detection limits of 1.4 - 4.0 ng/mL. Excellent method reproducibility (RSD < 2.9%) was found over a linear range of 0.05-5 microg/mL, and the time for the whole analysis was only approximately 25 min. The monolithic capillary column was reusable in coping with the complicated urine samples.

Determination of camptothecin and 10-hydroxycamptothecin in human plasma using polymer monolithic in-tube solid phase microextraction combined with high-performance liquid chromatography

A biocompatible in-tube solid-phase microextraction (SPME) device was used for the direct and on-line extraction of camptothecin and 10-hydroxycamptothecin in human plasma. Biocompatibility was achieved through the use of a poly(methacrylic acid-ethylene glycol dimethacrylate) monolithic capillary column for extraction. Coupled to high performance liquid chromatography (HPLC) with UV detection, this on-line in-tube SPME method was successfully applied to the simultaneous determination of camptothecin and 10-hydroxycamptothecin in human plasma. The calculated detection limits for camptothecin and 10-hydroxycamptothecin were found to be 2.62 and 1.79 ng/mL, respectively. The method was linear over the range of 10-1000 ng/mL. Excellent method reproducibility was achieved, yielding RSDs of 2.49 and 1.59%, respectively. The detection limit (S/N = 3) of camptothecin was found to reach 0.1 ng/mL using fluorescence detection. The proposed method was shown to cope robustly with the extraction and analysis of camptothecin and 10-hydroxycamptothecin in plasma samples.

Eliminating the Interferences from TRIS Buffer and SDS in Protein Analysis by Fused-Droplet Electrospray Ionization Mass Spectrometry

Multiply charged protein ions were detected from the solutions containing a high concentration of tris(hydroxymethyl) aminomethane buffer (TRIS) and sodium dodecyl sulfate (SDS) using fused-droplet electrospray ionization mass spectrometry (FD-ESI/MS). The sample aerosols were generated at ambient temperature with a pneumatic nebulizer commonly used to produce sample aerosols in an atmospheric pressure chemical ionization (APCI) source. The aerosols were carried by nitrogen gas to the tip of a capillary where charged methanol droplets had been continuously generated by electrospraying an acidic methanol solution. The neutral sample aerosols then fused with the charged methanol droplets and electrospray ionization proceeded from the newly formed fused droplets to generate multiply charged protein ions. Because of its low solubility in methanol, TRIS molecules (concentration as high as 1 M) were efficiently excluded from the newly formed droplets and the protein ion signals were detected and observed in the mass spectra. To remove the interferences from SDS, equal moles of positively charged cetyltrimethylammonium bromide (CTAB) was added into the SDS containing sample solution to form the dodecyl sulfate-cetyltrimethylammonium ion pair (DS-CTA). The DS-CTA ion pair has a low polarity and solubility in methanol and is excluded from the fused droplet. Protein ions were still detected from the solution containing 10(-2) M of SDS.

Development of miniaturized sample preparation with fibrous extraction media

Introducing fine polymeric filaments as the extraction medium, a miniaturized sample preparation technique for micro-column liquid chromatography (micro-LC) has been developed along with the investigation of a reproducible preparation scheme of the extraction capillary. The polymeric filaments were packed longitudinally into either a fused-silica capillary or a polyether ether ketone (PEEK) capillary of appropriate dimensions, and the extraction capillary was installed to the injection valve in micro-LC system. The number of packed filaments should be precisely counted before the packing process to make sure the reproducible preparation of the extraction capillary. With conventional stationary phase materials for open-tubular gas chromatography, polymeric coating to the surface of the filaments was also studied in order to further enhance the extraction performance and selectivity. Coated with the polymeric material suitable for the extraction of particular analyte, a dramatic improvement on the extraction power was obtained. The results suggest that the future possibility of novel tailored fibrous extraction medium with an appropriate coating on it, especially for the analysis of complex sample matrices.

Polymer-Coated Fibrous Materials as the Stationary Phase in Packed Capillary Gas Chromatography

Synthetic polymer filaments have been introduced as the support material in packed capillary gas chromatography (GC). The filaments of the heat-resistant polymers, Zylon, Kevlar, Nomex, and Technora, were longitudinally packed into a short fused-silica capillary, followed by the conventional coating process for open-tubular GC columns. The separation of several test mixtures such as n-alkylbenzenes and n-alkanes was carried out with these polymer-coated fiber-packed capillary columns. With the coating by various polymeric materials on the surface of these filaments, the retentivity was significantly improved over the parent fiber-packed column (without polymer coating) as well as a conventional open-tubular capillary of the same length. The results demonstrated a good combination of Zylon as the support and poly(dimethylsiloxane)-based materials as the coating liquid-phase for the successful GC separation of n-alkanes and polycyclic aromatic hydrocarbons (PAHs), while successful applications for other separations such as poly(ethylene glycol) coating for the separation of alcohols were also obtained. From the results it has been suggested that the selectivity of the fiber-packed column could be tuned by selecting different coating materials, indicating the promising possibility for a novel usage of fine fibrous polymers as the support material that can be combined with newly synthesized coating materials specially designed for particular separations. Taking advantage of good thermal stability of the fibers, the column temperature could be elevated to higher than 350 degrees C with the combination of a short metallic capillary.

Effect of Polymer Concentration on Partitioning and Molecular Recognition in Plasticized Poly(vinyl chloride)

Mixtures of poly(vinyl chloride) (PVC) with plasticizers have been used in ion-selective electrodes for many years. The same material has proven useful in solid-phase microextraction (SPME), both with and without artificial receptors. We hypothesized that by changing the polymer concentration in plasticized PVC membranes containing artificial receptor from the standard 33 wt %, the selectivity of the extraction of barbiturates over similar molecules could be improved. Partition coefficients and receptor-substrate formation constants of a target species, phenobarbital, in membranes with various polymer concentrations were determined. Diffusion coefficients of the solute phenobarbital in receptor-free membranes were also determined. Kamlet-Taft solvatochromic properties beta and pi* were measured for the PVC/dioctyl sebacate materials. Cohesive energy densities were calculated for the same materials. Partition coefficients for phenobarbital (from aqueous solution to membrane) decrease as [PVC] increases, while the formation constants for the complex of the solute with its receptor increase. Diffusion coefficients decrease as the polymer concentration increases as well. The increase in polymer concentration brings about a decrease in hydrogen-bonding basicity and an increase in dipolarity and cohesive energy density. The values of the solvatochromic parameters determined at various compositions are highly correlated; thus, it is impossible to calculate how much each factor contributes to the changes associated with partition and complex formation. The solvatochromic "polarizability correction factor" has been determined to be 0 for PVC. In SPME experiments at 30%, 40%, and 50% (w/w) PVC, as polymer concentration increases, selectivity for barbiturate extraction over other cyclic imides becomes better in the presence of barbiturate receptor and worse without receptor.

Miniaturized sample preparation combined with liquid phase separations

Miniaturized sample preparation methods designed as the sample pretreatment for liquid phase separations, such as liquid chromatography, capillary electrophoresis and capillary electrochromatography, have been reviewed especially for the on-line coupling of the sample preparation process and the separation process. The development of the desorption interfaces for the effective combining of the sample preparation and subsequent liquid phase separations is briefly described along with the applications of the combined analytical systems to the analysis of complex sample mixtures such as biological and environmental matrices. Novel use of fine polymeric filaments as the extraction medium for microscale liquid phase separation methods are investigated and a comparison is made with other sample preparation techniques. Polymer coating onto the fibrous material is also introduced to further develop microscale sample preparation methods with improved extraction performance. Several other microscale sample preparation methods having a potential compatibility to the liquid phase separations are also described for future applications of these techniques.

Automated online dual-column extraction coupled with teicoplanin stationary phase for simultaneous determination of (R)- and (S)-propranolol in rat plasma using liquid chromatography-tandem mass spectrometry

An automated online sample extraction method for rat plasma was developed and validated for the quantification of (R)- and (S)-propranolol following the intravenous administration of either the racemate or the individual enantiomers at 5 mg/kg. A dual-column extraction system coupled to a chiral stationary phase (CSP) was used in conjunction with liquid chromatography-tandem mass spectrometry. In this method, two Oasis HLB extraction columns (50x1.0 mm) in parallel were used for online plasma sample purification and teicoplanin CSP (Chirobiotic T) was used for the enantiomeric separation. This method allowed the use of one of the extraction columns for purification while the other was being equilibrated. Hence, the time required for re-conditioning the extraction columns did not contribute to the total analysis time per sample, which resulted in a relatively shorter run time and higher throughput. The lower limit of detection was 0.5 ng/ml and the lower limit of quantification was 2 ng/ml for each enantiomer using 25 microl of rat plasma. The method was validated with a linear calibration curve between 2 and 2000 ng/ml for (R)- and (S)-propranolol, respectively. The intra- and inter-day precision (C.V.) was no more than 7.6% and the accuracy of the assay was between 92 and 103%. The teicoplanin CSP proved to be rugged with excellent reproducibility of chromatographic parameters.

Determination of daidzein and genistein in soybean foods by automated on-line in-tube solid-phase microextraction coupled to high-performance liquid chromatography

An automated on-line method for the determination of the isoflavones, daidzein and genistein, was developed using in-tube solid-phase microextraction coupled to high-performance liquid chromatography (in-tube SPME-HPLC). In-tube SPME is a new extraction technique for organic compounds in aqueous samples, in which analytes are extracted from the sample directly into an open tubular capillary by repeated draw/eject cycles of sample solution. Daidzein, genistein and their glucosides tested in this study were clearly separated within 8 min by HPLC using an XDB-C8 column with diode array detection. In order to optimize the extraction of these compounds, several in-tube SPME parameters were examined. The glucosides daidzin and genistin were analyzed as aglycones after hydrolysis because the glucosides were not concentrated by in-tube SPME. The optimum extraction conditions for daidzein and genistein were obtained with 20 draw/eject cycles of 40 microl of sample using a Supel-Q porous layer open tubular capillary column. The extracted compounds were easily desorbed from the capillary by mobile phase flow, and carryover was not observed. Using the in-tube SPME-HPLC method, the calibration curves of these compounds were linear in the range 5-200 ng/ml, with a correlation coefficient above 0.9999 (n = 18), and the detection limits (S/N = 3) were 0.4-0.5 ng/ml. This method was successfully applied to the analysis of soybean foods without interference peaks. The recoveries of aglycones and glucosides spiked into food samples were above 97%.

Polymer-coated fibrous extraction medium for sample preparation coupled to microcolumn liquid-phase separations

Polymer-coated fibrous material has been introduced as the extraction medium for a miniaturized sample preparation method being coupled with microcolumn liquid chromatography. The preconcentration and the subsequent liquid chromatographic separation of tricyclic antidepressants (TCAs) drugs, amitriptyline, imipramine, nortriptyline and desipramine, was carried out with the hyphenated system. Several basic experimental parameters, such as extraction and separation conditions, were investigated along with the applicability of the method for the analysis of biological fluids. The results clearly showed that the on-line coupled system could be a powerful tool for the analysis of complex mixtures in biological matrix without a large solvent consumption and specially designed instruments. The lowest limit of quantification was quite acceptable for the analysis of TCAs in clinical and forensic situations.