Eco-Corona vs Protein Corona: Effects of Humic Substances on Corona Formation and Nanoplastic Particle Toxicity in Daphnia magna

Aquatic organisms modulate the bioreactivity of engineered nanoparticles: focus on biomolecular corona

The increased use of nanoparticle (NP)-enabled materials in everyday-life products have raised concerns about their environmental implications and safety. This motivated the extensive research in nanoecotoxicology showing the possibility that NPs could cause harm to the aquatic organisms if present at high concentrations. By contrast, studies dealing with influence that organisms could exert on the fate and thus effects of NPs are still very rare. Drawing on the existing up-to-date knowledge we critically discuss the formation of biomolecular corona as one of the mechanisms by which organisms exerted control on the NPs fate in the aquatic and biotic environments. We focused the formation of corona by exogeneous and endogenous biomolecules and illustrated the discussion with the specific example of phytoplankton and aquatic invertebrate species. We highlighted the necessity to incorporate the concept of biomolecular corona within more general framework considering the feedback of aquatic organisms and the control they exert in shaping the fate and impact of NPs in the aquatic and biological environment. In our view such broader perspective will contribute to get novel insights into the drivers of environmental transformations of NPs and their mechanisms, which are important in environmental risk assessment.

Coronas of micro/nano plastics: a key determinant in their risk assessments

As an emerging pollutant in the life cycle of plastic products, micro/nanoplastics (M/NPs) are increasingly being released into the natural environment. Substantial concerns have been raised regarding the environmental and health impacts of M/NPs. Although diverse M/NPs have been detected in natural environment, most of them display two similar features, i.e.,high surface area and strong binding affinity, which enable extensive interactions between M/NPs and surrounding substances. This results in the formation of coronas, including eco-coronas and bio-coronas, on the plastic surface in different media. In real exposure scenarios, corona formation on M/NPs is inevitable and often displays variable and complex structures. The surface coronas have been found to impact the transportation, uptake, distribution, biotransformation and toxicity of particulates. Different from conventional toxins, packages on M/NPs rather than bare particles are more dangerous. We, therefore, recommend seriously consideration of the role of surface coronas in safety assessments. This review summarizes recent progress on the eco-coronas and bio-coronas of M/NPs, and further discusses the analytical methods to interpret corona structures, highlights the impacts of the corona on toxicity and provides future perspectives.

Mitigation Effects and Associated Mechanisms of Environmentally Relevant Thiols on the Phytotoxicity of Molybdenum Disulfide Nanosheets

Thorough investigations of the environmental fate and risks are necessary for the safe application of engineered nanomaterials. Nevertheless, the current understanding of potential transformations of MoS₂ (an intensively studied two-dimensional nanosheet) upon interactions with ubiquitous environmentally relevant thiols (ERTs) in water is limited. This study revealed that two ERTs, l-cysteine and mercaptoacetic acid, could modify MoS₂ by covalently grafting thiol groups on S atoms of 1T phases, improving the colloidal persistence and chemical stability of MoS₂. Compared with the pristine form, MoS₂-thiols with higher dispersity exhibited significantly mitigated envelopment and ultrastructural damage to microalgae. MoS₂-triggered growth inhibition, upregulation of reactive oxygen species, photosynthetic injury, and metabolic perturbation in algae were remarkably attenuated by ERTs. The diminished capability for MoS₂ to generate reactive intermediates and glutathione oxidation driven by ERTs caused the weakness of oxidative stress and negative effects. Additionally, molecular dynamics simulations demonstrated that ERTs altered the extent of the influence of MoS₂ on the secondary structures and functions of adsorbed intracellular proteins, which also contributed to the lower phytotoxicity of MoS₂. Our findings provide evidence for the crucial role of specific organic ligands in the risk of MoS₂ in aquatic environments.

Nanoplastics in Aquatic Environments: Impacts on Aquatic Species and Interactions with Environmental Factors and Pollutants

Plastic production began in the early 1900s and it has transformed our way of life. Despite the many advantages of plastics, a massive amount of plastic waste is generated each year, threatening the environment and human health. Because of their pervasiveness and potential for health consequences, small plastic residues produced by the breakdown of larger particles have recently received considerable attention. Plastic particles at the nanometer scale (nanoplastics) are more easily absorbed, ingested, or inhaled and translocated to other tissues and organs than larger particles. Nanoplastics can also be transferred through the food web and between generations, have an influence on cellular function and physiology, and increase infections and disease susceptibility. This review will focus on current research on the toxicity of nanoplastics to aquatic species, taking into account their interactive effects with complex environmental mixtures and multiple stressors. It intends to summarize the cellular and molecular effects of nanoplastics on aquatic species; discuss the carrier effect of nanoplastics in the presence of single or complex environmental pollutants, pathogens, and weathering/aging processes; and include environmental stressors, such as temperature, salinity, pH, organic matter, and food availability, as factors influencing nanoplastic toxicity. Microplastics studies were also included in the discussion when the data with NPs were limited. Finally, this review will address knowledge gaps and critical questions in plastics’ ecotoxicity to contribute to future research in the field.

Potential health risks of the interaction of microplastics and lung surfactant

Microplastics (MPs), as pollutants of environmental concern, are correlated with increased risk of various respiratory diseases. Nevertheless, whether or not MPs have adverse influences on the interfacial properties of lung surfactant (LS), and its effect on the generation of reactive oxygen species are poorly understood. In the present study, natural LS extracted from porcine lungs was used to investigate the interaction with polystyrene as a representative MPs. The results showed that the phase behavior, surface tension, and membrane structure of the LS were altered in the presence of polystyrene. Adsorption experiments demonstrated that in the mixed system of polystyrene and LS (the main active ingredients are phospholipids and proteins), adsorption of phospholipid components by polystyrene was notably higher than that of proteins. Moreover, polystyrene can accelerate the conversion between ascorbic acid and deoxyascorbic acid, thereby producing hydrogen peroxide (HOOH) in simulated lung fluid (containing LS) and further giving rise to an increase in the content of hydroxyl radicals (•OH). This work provides new insight into the potential hazard of MPs in human respiratory system, which is helpful for deeply understanding the unfavorable physicochemical effects of MPs exposure and the role of inhaled MPs on lung health.

Fate and removal efficiency of polystyrene nanoplastics in a pilot drinking water treatment plant

Occurrence of microplastics and nanoplastics in aquatic systems, as well as in water compartments used to produce drinking water have become a major concern due to their impact on the environment and public health. Nanoplastics in particular, in regard to their fate and removal efficiency in drinking water treatment plants (DWTP), which ensure water quality and supply drinking water for human consumption have been, by far, rarely investigated. This study investigates the removal efficiency of polystyrene (PS) nanoplastics in a conventional water treatment plant providing drinking water for 500'000 consumers. For that purpose, a pilot-scale DWTP, located within the main treatment plant station, reproducing at a reduced scale the different processes and conditions of the main treatment plant is used. The results show that filtration process through sand and granular activated carbon (GAC) filters in the absence of coagulation achieves an overall nanoplastic removal of 88.1%. The removal efficiency of filtration processes is mainly attributed to physical retention and adsorption mechanisms. On the other hand, it is found that coagulation process greatly improves the removal efficiency of nanoplastics with a global removal efficiency equal to 99.4%. The effective removal efficiency of sand filtration increases considerably from 54.3% to 99.2% in the presence of coagulant, indicating that most of PS nanoplastics are removed during sand filtration process. The higher removal efficiency with the addition of coagulant is related to nanoplastics surface charge reduction and aggregation thus significantly increasing their retention in the filter media.

Key knowledge gaps for One Health approach to mitigate nanoplastic risks

There are increasing concerns over the threat of nanoplastics to environmental and human health. However, multidisciplinary barriers persist between the communities assessing the risks to environmental and human health. As a result, the hazards and risks of nanoplastics remain uncertain. Here, we identify key knowledge gaps by evaluating the exposure of nanoplastics in the environment, assessing their bio-nano interactions, and examining their potential risks to humans and the environment. We suggest considering nanoplastics a complex and dynamic mixture of polymers, additives, and contaminants, with interconnected risks to environmental and human health. We call for comprehensive integration of One Health approach to produce robust multidisciplinary evidence to nanoplastics threats at the planetary level. Although there are many challenges, this holistic approach incorporates the relevance of environmental exposure and multi-sectoral responses, which provide the opportunity to identify the risk mitigation strategies of nanoplastics to build resilient health systems.

Benzo[a]pyrene and heavy metal ion adsorption on nanoplastics regulated by humic acid: Cooperation/competition mechanisms revealed by molecular dynamics simulations

Nanoplastics adsorb pollutants and organic matter to aggravate or alleviate impact to the eco-environment and human health. However, the interaction mechanisms remain unclear and difficult to study using current experimental techniques. By means of molecular dynamics simulation, here we investigate adsorption of benzo[a]pyrene (BaP) and heavy metal ions (Cu²⁺) on nanoplastics of different materials and surface charges regulated by humic acid (HA). Among considered materials, polystyrene shows the highest capacity of adsorbing BaPs via forming sandwiched π-stacking structures with benzene rings. Driven by hydrophobic, electrostatic and hydrogen bonding interactions, HAs spontaneously aggregate into micelle-like structures with hydrophobic core and charged exterior accessible to BaPs and Cu²⁺, respectively. Cationic and neutral nanoplastics adsorb more HAs to form eco-coronas, which modulate BaP and Cu²⁺ adsorption via following cooperation/competition mechanisms. On one hand, the direct binding of BaPs to nanoplastics is hindered by HAs through BaP encapsulation plus competitive adsorption. On the other hand, adsorbed HAs expose carboxyl groups to offer rich binding sites to promote Cu²⁺ adsorption on neutral and cationic nanoplastics, while unbound HAs compete with anionic nanoplastics to inhibit Cu²⁺ adsorption. These results provide molecular level insights into transport, transformation and accessibility of nanoplastics with coexisting contaminants in the aqueous environment.

Micro-Nano Plastic in the Aquatic Environment: Methodological Problems and Challenges

Microplastic research has become a buzz word. It is seen as one of the most pressing issues of Anthropocene contamination. There is certainly no doubt about the ubiquitous presence of microplastic (MP) in almost all environmental matrices. However, the validity of considering them as a vector for contaminants needs some reconsideration, there are other more potent pathways. Their effect on marine biota also calls for some realistic experiments with environmental concentrations of MP and nanoplastic (NP). It has been observed that in most published literature, polymer characterization is performed. Is it necessary to do, or will merely finding and confirming the particle as plastic suffice for environmental research? Harmonization of protocols is necessary, and there is likely a need for some inter-laboratory comparison exercises in order to produce comparable data and reliable assessments across regions. Samples collected from the same area using different techniques show an order of magnitude difference in MP concentration. The issue of nanoplastic is more contentious; are we technologically ready to identify NP in environmental samples?

Photoaging enhanced the adverse effects of polyamide microplastics on the growth, intestinal health, and lipid absorption in developing zebrafish

The safety of microplastics (MPs) and associated health effects has been one of the major concerns worldwide. However, the role of photoaging toward the risk of MPs in water ecosystems remains inconclusive yet. In this study, the size of polyamide (PA, ∼32.50 μm) MPs was obviously decreased after photoaging in water containing fulvic acid (FA) and humic acid (HA) (∼19.75 and ∼24.30 μm, respectively). Nanoplastics were formed (4.65% and 2.03%, respectively) and hydrophilia and colloidal stability was improved due to the formation of oxygen-containing functional groups. FA-aged PA exhibited higher inhibition on body length and weight of developing zebrafish than HA-aged and pristine PA. Photoaged MPs in intestine were more difficult to be depurated by zebrafish, leading to the disappearance of intestinal folding, shedding of more enterocytes, and emaciation of intestinal microvilli. Dietary lipid digestion in larvae was inhibited by aged PA due to oxidative stress-triggered lipid peroxidation and inhibition of lipase activities and bile acids secretion. Exposure of photoaged MPs down-regulated genes (cd36, dgat1a, dgat2, mttp, etc.) associated with triglyceride resynthesis and transportation, resulting in lipid maladsorption and growth inhibition. Our findings highlight the potential negative effects of environmentally aged MPs on diet digestion and nutrient assimilation in fish.

Toxicity of nanoplastics for zebrafish embryos, what we know and where to go next

Nanoplastics (NP) are an emerging threat to human health and there is a need to understand their toxicity. Zebrafish (ZF) is extensively used as a toxicology model due to its power to com-bine genetic, cellular, and whole organism endpoints. The present review integrates results regarding polystyrene NP effects on ZF embryo development. Study design was evaluated against NP effects. NP size, concentration, and exposure time did not affect organism responses (mortality, development, heart rate, locomotion) or cellular responses (gene expression, enzymes, metabolites). However, NP accumulation depended on size. Smaller NP can reach internal organs (brain, eyes, liver, pancreas, heart) but larger (>200 nm) accumulate mainly in gut, gills and skin. Locomotion and heart rate were commonly affected with hypoactivity and bradycardia being more prevalent. Effects on genetic/enzymatic/metabolic pathways were thoroughly analyzed. Immunity genes were generally upregulated whereas oxidative stress response genes varied. Central nervous system genes and visual related genes were generally downregulated. Results of genetic and enzymatic analyses coincided only for some genes/enzyme pairs. Reviewed studies provide a basis for understanding NP toxicity but results are hard to integrate. We propose key recommendations and future directions with regard to experimental design that may allow greater comparability across future studies.

Electrostatic attraction of cationic pollutants by microplastics reduces their joint cytotoxicity

Microplastic (MP) pollution causes global concerns regarding the consequential impacts on human health. In particular, MPs may act as vectors for various contaminants to induce adverse effects in human. In this work, the joint cytotoxicity of two different MPs co-exposed with diverse ionic pollutants was investigated in two cell lines from human digestive system: human gastric epithelium (GES-1) and colorectal mucosa (FHC) cell lines. The results indicated that the cytotoxicity of cationic pollutants was alleviated by MPs more significantly than that of anionic pollutants in both culture medium and river water. The electrostatic attraction between the negatively charged MPs and cations was a key factor in determining the ultimate joint toxicity. Our findings indicate that the joint cytotoxicity of MP-pollutant mixtures may be proactively reduced by modulating the surface charge of MPs.

Sulfur vacancies affect the environmental fate, corona formation, and microalgae toxicity of molybdenum disulfide nanoflakes

Sulfur vacancy (SV) defects have been engineered in two-dimensional (2D) transition metal dichalcogenides (TMDs) for high performance applications in various fields involving environmental protection. Understanding the influence of SVs on the environmental fate and toxicity of TMDs is critical for evaluating their risk. Our work discovered that SVs (with S/Mo ratios of 1.65 and 1.32) reduced the dispersibility and promoted aggregation of 2H phase molybdenum disulfide (2H-MoS₂, a hot TMD) in aqueous solution. The generation capability of •O₂^- and •OH was increased and the dissolution of 2H-MoS₂ was significantly accelerated after SVs formation. Different with pristine form, S-vacant 2H-MoS₂ preferentially harvested proteins (i.e., forming protein corona) involved in antioxidation, photosynthetic electron transport, and the cytoskeleton structure of microalgae. These proteins contain a higher relative number of thiol groups, which exhibited stronger affinity to S-vacant than pristine 2H-MoS₂, as elucidated by density functional theory calculations. Notably, SVs aggravated algal growth inhibition, oxidative damage, photosynthetic efficiency and cell membrane permeability reduction induced by 2H-MoS₂ due to increased free radical yield and the specific binding of functional proteins. Our findings provide insights into the roles of SVs on the risk of MoS₂ while highlighting the importance of rational design for TMDs application.

A toxicological perspective of plastic biodegradation by insect larvae

Larvae of some insect species (Coleoptera and Lepidoptera) can consume and biodegrade synthetic polymers, including polyethylene, polystyrene, polyvinyl chloride, and polypropylene. Multiple chemical (polymer mass loss and shift of the molecular weight, alterations in chemical functionality, formation of biodegraded intermediates, CO₂ production), physical (surface hydrophobicity, thermal analysis), and biological approaches (antibiotic treatment, gut dysbiosis, isolation of plastic microbial degraders) have provided evidence for polymer biodegradation in the larva digestive tract. However, the extent and rate of biodegradation largely depend on the physicochemical structure of the polymer as well as the presence of additives. Additionally, toxicology associated with plastic biodegradation has not been investigated. This knowledge gap is critical to understand the gut symbiont-host interaction in the biodegradation process, its viability in the long term, the effects of plastic additives and their metabolites, and the phenotypic traits linked to a plastic-rich diet might be transferred in successive generations. Likewise, plastic-eating larvae represent a unique case study for elucidating the mechanisms of toxic action by micro- and nanoplastics because of the high concentration of plastics these organisms may be intentionally exposed to. This perspective review graphically summarizes the current knowledge on plastic biodegradation by insect larvae and describes the physiological processes (digestive and immune systems) that may be disrupted by micro- and nanoplastics. It also provides an outlook to advance current knowledge on the toxicity assessment of plastic-rich diets and the environmental risks of plastic-containing by-products (e.g., insect manure used as fertilizer).

Conditioning Film and Early Biofilm Succession on Plastic Surfaces

In the context of environmental plastic pollution, it is still under debate if and how the "plastisphere", a plastic-specific microbial community, emerges. In this study, we tested the hypothesis that the first conditioning film of dissolved organic matter (DOM) sorbs selectively to polymer substrates and that microbial attachment is governed in a substrate-dependent manner. We investigated the adsorption of stream water-derived DOM to polyethylene terephthalate (PET), polystyrene (PS), and glass (as control) including UV-weathered surfaces by Fourier-transform ion cyclotron mass spectrometry. Generally, the saturated, high-molecular mass and thus more hydrophobic fraction of the original stream water DOM preferentially adsorbed to the substrates. The UV-weathered polymers adsorbed more polar, hydrophilic OM as compared to the dark controls. The amplicon sequencing data of the initial microbial colonization process revealed a tendency of substrate specificity for biofilm attachment after 24 h and a clear convergence of the communities after 72 h of incubation. Conclusively, the adsorbed OM layer developed depending on the materials' surface properties and increased the water contact angles, indicating higher surface hydrophobicity as compared to pristine surfaces. This study improves our understanding of molecular and biological interactions at the polymer/water interface that are relevant to understand the ecological impact of plastic pollution on a community level.

Humic acid mediated toxicity of faceted TiO2 nanocrystals to Daphnia magna

Nano-bio interface is of great importance in dictating the interaction between the nanomaterials and biological system and thus the toxicity to aquatic organisms. Herein, two specific faceted TiO₂ nanocrystals, {101} and {001} facet, were exposed to Daphnia magna to explore facet-dependent toxicological responses in aquatic environment. Due to the different influences on oxidative stress process, the half-maximal effective concentration (EC₅₀) value of {001} TiO₂ (1.27 g L^-1) to D. magna was less than that of {101} TiO₂ (1.68 g L^-1). Suwannee river humic acid (SRHA) could significantly reduce the oxidative stress responses of TiO₂ nanocrystals and thus alleviate their toxicities to D. magna in aquatic environment. The protective effect of SRHA against TiO₂ toxicity exhibited a facet-dependent manner. Compared to {101} TiO₂, a more obvious detoxification effect was observed for {001} TiO₂. The high SRHA concentration could endow both faceted TiO₂ nanocrystals with a similar toxicity due to the formation of SRHA-corona on TiO₂ surface. This facet-affected toxicity of nanomaterials in aquatic environment would provide us new insights in predicting the exposure risk of nanomaterials in nature waters.

Interaction of nanoplastics with extracellular polymeric substances (EPS) in the aquatic environment: A special reference to eco-corona formation and associated impacts

Nanoplastics (NPs) are plastic particles with sizes ranging between 1 and 1000 nm, exhibiting exceptional qualities such as large surface area, lightweight, durability; therefore, are widely used in cosmetics, paints, electronics, etc. NPs are inevitability released into the aquatic environment where they tend to interact with both, the extracellular polymeric substances (EPS) and other fractions of natural organic matter (NOM), respectively secreted by organisms (e.g., DNA, proteins, and carbohydrates) and degradation byproducts of organic materials (e.g., humic acid and fulvic acid) fluxed into the water bodies. These biomolecules robustly encapsulate NPs to develop an eco-corona layer that alters not only the physicochemical properties but also the fate, bioreactivity, and ecological impacts of NPs. Therefore, this review summarized the documented studies highlighting the eco-corona formation on NPs and associated ecological implications in the aquatic environment. After presenting the precise background information on the occurrence of NPs and EPS in the aquatic environment, we demonstrated the basic difference between eco-corona and bio-corona formation. The reviewed studies showed that the eco-corona formed on NPs have varying sizes and composition, mainly depending on the properties of parent biomolecules, characteristics of NPs, and physicochemical parameters of the aquatic environment. Further, the potential methods for characterization and quantification of eco-corona and its composition have been also highlighted. Moreover, the ecological implications (both toxic and non-toxic) of eco-corona formation on NPs in marine and freshwater environments have been also summarized. Last but not the least, challenges and future research directions are also given, e.g., conducting field studies on eco-corona formation in the aquatic environment, optimizing methods for its characterization and quantification, and considering eco-corona concept in the future toxicity studies on NPs. Finally, understanding eco-corona formation will be critical to unveil the complex NP interactions occurring in natural aquatic systems.

Inherited and acquired corona of coronavirus in the host: Inspiration from the biomolecular corona of nanoparticles

The family of coronavirus are named for their crown shape. Encoded by the genetic material inherited from the coronavirus itself, this intrinsic well-known "viral corona" is considered an "inherited corona". After contact with mucosa or the entrance into the host, bare coronaviruses can become covered by a group of dissolved biomolecules to form one or multiple layers of biomolecules. The layers acquired from the surrounding environment are named the "acquired corona". We highlight here the possible role of the acquired corona in the pathogenesis of coronaviruses, which will generate fresh insight into the nature of various coronavirus-host interactions.

Eco-Interactions of Engineered Nanomaterials in the Marine Environment: Towards an Eco-Design Framework

Marine nano-ecotoxicology has emerged with the purpose to assess the environmental risks associated with engineered nanomaterials (ENMs) among contaminants of emerging concerns entering the marine environment. ENMs’ massive production and integration in everyday life applications, associated with their peculiar physical chemical features, including high biological reactivity, have imposed a pressing need to shed light on risk for humans and the environment. Environmental safety assessment, known as ecosafety, has thus become mandatory with the perspective to develop a more holistic exposure scenario and understand biological effects. Here, we review the current knowledge on behavior and impact of ENMs which end up in the marine environment. A focus on titanium dioxide (n-TiO₂) and silver nanoparticles (AgNPs), among metal-based ENMs massively used in commercial products, and polymeric NPs as polystyrene (PS), largely adopted as proxy for nanoplastics, is made. ENMs eco-interactions with chemical molecules including (bio)natural ones and anthropogenic pollutants, forming eco- and bio-coronas and link with their uptake and toxicity in marine organisms are discussed. An ecologically based design strategy (eco-design) is proposed to support the development of new ENMs, including those for environmental applications (e.g., nanoremediation), by balancing their effectiveness with no associated risk for marine organisms and humans.

Understanding the Fundamental Basis for Biofilm Formation on Plastic Surfaces: Role of Conditioning Films

Conditioning films (CFs) are surface coatings formed by the adsorption of biomolecules from the surrounding environment that can modify the material-specific surface properties and precedes the attachment of microorganisms. Hence, CFs are a biologically relevant identity that could govern the behavior and fate of microplastics in the aquatic environment. In the present study, polyethylene terephthalate (PET) and polylactic acid (PLA) plastic cards were immersed in natural seawater to allow the formation of CFs. The changes in the surface roughness after 24 h were investigated by atomic force microscopy (AFM), and the surface changes were visualized by scanning electron microscopy (SEM). The global elemental composition of the conditioned surface was investigated by energy dispersive spectroscopy (EDS). Results indicated that marine conditioning of PET and PLA samples for 24 h resulted in an increase of ∼11 and 31% in the average surface roughness, respectively. SEM images revealed the attachment of coccoid-shaped bacterial cells on the conditioned surfaces, and the accumulation of salts of sodium and phosphate-containing precipitates was revealed through the EDS analysis. The results indicate that the increase in surface roughness due to conditioning is linked to a material’s hydrophilicity leading to a rapid attachment of bacteria on the surfaces. Further investigations into the CFs can unfold crucial knowledge surrounding the plastic-microbe interaction that has implications for medical, industrial, and environmental research.

Environmental dimensions of the protein corona

The adsorption of biomolecules to the surface of engineered nanomaterials, known as corona formation, defines their biological identity by altering their surface properties and transforming the physical, chemical and biological characteristics of the particles. In the first decade since the term protein corona was coined, studies have focused primarily on biomedical applications and human toxicity. The relevance of the environmental dimensions of the protein corona is still emerging. Often referred to as the eco-corona, a biomolecular coating forms upon nanomaterials as they enter the environment and may include proteins, as well as a diverse array of other biomolecules such as metabolites from cellular activity and/or natural organic matter. Proteins remain central in studies of eco-coronas because of the ease of monitoring and structurally characterizing proteins, as well as their crucial role in receptor engagement and signalling. The proteins within the eco-corona are optimal targets to establish the biophysicochemical principles of corona formation and transformation, as well as downstream impacts on nanomaterial uptake, distribution and impacts on the environment. Moreover, proteins appear to impart a biological identity, leading to cellular or organismal recognition of nanomaterials, a unique characteristic compared with natural organic matter. We contrast insights into protein corona formation from clinical samples with those in environmentally relevant systems. Principles specific to the environment are also explored to gain insights into the dynamics of interaction with or replacement by other biomolecules, including changes during trophic transfer and ecotoxicity. With many challenges remaining, we also highlight key opportunities for method development and impactful systems on which to focus the next phase of eco-corona studies. By interrogating these environmental dimensions of the protein corona, we offer a perspective on how mechanistic insights into protein coronas in the environment can lead to more sustainable, environmentally safe nanomaterials, as well as enhancing the efficacy of nanomaterials used in remediation and in the agri-food sector.

Adsorption of bio-organic eco-corona molecules reduces the toxic response to metallic nanoparticles in Daphnia magna

As the use of engineered nanomaterials increases, so does the risk of them spreading to natural ecosystems. Hitherto, knowledge regarding the toxic properties of nanoparticles (NP’s) and their potential interactions with natural bio-organic molecules adsorbed to them, and thereby forming surface coronas, is limited. However, we show here that the toxic effect of NPs of tungsten carbide cobalt (WC–Co) and cobalt (Co) on the crustacean Daphnia magna is postponed in the presence of natural biological degradation products (eco-corona biomolecules). For Daphnia exposed to WC–Co NPs the survival time increased with 20–25% and for Co NPs with 30–47% after mixing the particles with a solution of eco-corona biomolecules before exposure. This suggests that an eco-corona, composed of biomolecules always present in natural ecosystems, reduces the toxic potency of both studied NPs. Further, the eco-coronas did not affect the particle uptake, suggesting that the reduction in toxicity was related to the particle-organism interaction after eco-corona formation. In a broader context, this implies that although the increasing use and production of NPs may constitute a novel, global environmental threat, the acute toxicity and long-term effects of some NPs will, at least under certain conditions, be reduced as they enter natural ecosystems.

Protein Corona-Mediated Extraction for Quantitative Analysis of Nanoplastics in Environmental Waters by Pyrolysis Gas Chromatography/Mass Spectrometry

There is a growing concern about the effects of nanoplastics on biological safety and human health because of their global ubiquity in the environment. Methodologies for quantitative analysis of nanoplastics are important for the critical evaluation of their possible risks. Herein, a sensitive yet simple and environmentally friendly extraction approach mediated by protein corona is developed and coupled to pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) for nanoplastic determination in environmental waters. The developed methodology involved the formation of protein corona by addition of bovine serum albumin (BSA) to samples and protein precipitation via salting out. Then, the resulting extract was directly introduced to Py-GC/MS for nanoplastic mass quantification. Taking 50 nm polystyrene (PS) particles as a model, the highest extraction efficiency for nanoplastics was achieved under the extraction conditions of BSA concentration of 20 mg/L, equilibration time of 5 min, pH 3.0, 10% (w/v) NaCl, incubation temperature of 80 °C, and incubation period of 15 min. The extraction was confirmed to be mediated by the protein corona by transmission electron microscopy (TEM) analysis of the extracted nanoplastics. In total, 1.92 and 2.82 μg/L PS nanoplastics were detected in river water and the influent of wastewater treatment plant (WWTP), respectively. Furthermore, the feasibility of the present methodology was demonstrated by applying to extract PS and poly(methyl methacrylate) (PMMA) nanoplastics from real waters with recoveries of 72.1-98.9% at 14.2-50.4 μg/L spiked levels. Consequently, our method has provided new insights and possibilities for the investigation of nanoplastic pollution and its risk assessment in the environment.

An environmental ecocorona influences the formation and evolution of the biological corona on the surface of single-walled carbon nanotubes

Nanomaterials (NMs) taken up from the environment carry a complex ecocorona consisting of dissolved organic matter. An ecocorona is assumed to influence the interactions between NMs and endogenous biomolecules and consequently affects the formation of a biological corona (biocorona) and the biological fate of the NMs. This study shows that biomolecules in fish plasma attach immediately (within <5 min) to the surface of SWCNTs and the evolution of the biocorona is a size dependent phenomenon. Quantitative proteomics data revealed that the nanotube size also influences the plasma protein composition on the surface of SWCNTs. The presence of a pre-attached ecocorona on the surface of SWCNTs eliminated the influence of nanotube size on the formation and evolution of the biocorona. Over time, endogenous biomolecules from the plasma partially replaced the pre-attached ecocorona as measured using a fluorescently labelled ecocorona. The presence of an ecocorona offers a unique surface composition to each nanotube. This suggests that understanding the biological fate of NMs taken up from the environment by organisms to support the environmental risk assessment of NMs is a challenging task because each NM may have a unique surface composition in the body of an organism.

Microparticles and microplastics contamination in African table salts

The presence of micro/plastic particles has been reported in various seafood products. However, information on microplastics contamination in salts from African continent is very limited. This study analysed 23 brands of table salts from 8 African countries for microplastics using microscopic/spectroscopic techniques. South Africa showed the highest microplastics concentration (0-1.33 ± 0.32 particles/kg), Nigeria, Cameroun, and Ghana (0-0.33 ± 0.38 particles/kg each); characterized as polyvinyl acetate, polypropylene, and polyethylene. Other countries have no detectable microplastics at 0.3 μm filter pore size. To our best knowledge, this is the first study to characterize micro-fibres/plastics in table salts across African countries, confirming that it is an emission source of micro-fibres/plastics into the human food chain, highlighting the overarching need to understand their effects on human health.

Incubation in Wastewater Reduces the Multigenerational Effects of Microplastics in Daphnia magna

The aging of microplastics in the environment changes their physicochemical properties. While this may affect their toxicity, comparative data on the effects of aged compared to pristine microplastics are scarce. One of those aging processes is the sorption of chemicals, which has mainly been studied for individual pollutants present in marine ecosystems. To investigate how the sorption of a complex mixture of freshwater pollutants affects the toxicity of microplastics, we incubated irregular polystyrene particles (≤63 μm) in either wastewater or ultrapure water. We exposed Daphnia magna to these aged microplastics and their pristine counterparts (80, 400, 2000, and 10,000 particles mL^-1) over four generations using food limitation as an additional, environmentally realistic stressor. Both particle types affect the survival, reproduction, adult and neonate body lengths, and growth. An exposure to pristine microplastics results in the extinction of the third generation of daphnids. In contrast, wastewater-incubated particles induced a lower mortality. The incubation with wastewater does not change the microplastics' size, surface charge, and structure. Consistent with the literature, we assume that the adsorption of dissolved organic matter is a key aging process reducing the toxicity of microplastics. Consequently, toxicity testing using pristine microplastics may overestimate the effects of plastic particles in nature.

Reviewing nanoplastic toxicology: It's an interface problem

Multiple international agencies have recently raised environmental and health concerns regarding plastics in nanoforms (nanoplastics), but there is insufficient knowledge of their properties to allow for an accurate risk assessment to be conducted and any risks managed. For this reason, research into the toxicity of nanoplastics has focused strongly on documenting their impacts on biological organisms. One scope of this review is to summarise the recent findings on the adverse effects on biological organisms and strategies which can be adopted to advance our understanding of nanoplastic properties and their toxicity. Specifically, a mechanistic approach has already been employed in nanotoxicology, which focuses on the cause-and-effect relationships to establish a tool that predicts the biological impacts based on nanoparticle characteristics. Identifying the chemical and biological bases behind the observed biological effects (such as in vitro cellular response) is a major challenge, due to the intricate nature of nanoparticle-biological molecule complexes and an unawareness of their interaction with other biological targets, particularly at interfacial level. An exemplary case includes protein corona formation and ecological molecule corona (eco-corona) for nanoplastics. Therefore, the second scope of this review is to discuss recent findings and importance of (for both non-plastic and plastic nanoparticles) coronae formation and structure. Finally, we discuss the opportunities provided by model system approaches (model protein corona and lipid bilayer) to deepen the understanding of the above-mentioned perspectives, and corroborate the findings from in vitro experiments.

Understanding the Fundamental Basis for Biofilm Formation on Plastic Surfaces: Role of Conditioning Films

Conditioning films (CFs) are surface coatings formed by the adsorption of biomolecules from the surrounding environment that can modify the material-specific surface properties and precedes the attachment of microorganisms. Hence, CFs are a biologically relevant identity that could govern the behavior and fate of microplastics in the aquatic environment. In the present study, polyethylene terephthalate (PET) and polylactic acid (PLA) plastic cards were immersed in natural seawater to allow the formation of CFs. The changes in the surface roughness after 24 h were investigated by atomic force microscopy (AFM), and the surface changes were visualized by scanning electron microscopy (SEM). The global elemental composition of the conditioned surface was investigated by energy dispersive spectroscopy (EDS). Results indicated that marine conditioning of PET and PLA samples for 24 h resulted in an increase of ∼11 and 31% in the average surface roughness, respectively. SEM images revealed the attachment of coccoid-shaped bacterial cells on the conditioned surfaces, and the accumulation of salts of sodium and phosphate-containing precipitates was revealed through the EDS analysis. The results indicate that the increase in surface roughness due to conditioning is linked to a material's hydrophilicity leading to a rapid attachment of bacteria on the surfaces. Further investigations into the CFs can unfold crucial knowledge surrounding the plastic-microbe interaction that has implications for medical, industrial, and environmental research.

Nanopolystyrene translocation and fetal deposition after acute lung exposure during late-stage pregnancy

BACKGROUND

Plastic is everywhere. It is used in food packaging, storage containers, electronics, furniture, clothing, and common single-use disposable items. Microplastic and nanoplastic particulates are formed from bulk fragmentation and disintegration of plastic pollution. Plastic particulates have recently been detected in indoor air and remote atmospheric fallout. Due to their small size, microplastic and nanoplastic particulate in the atmosphere can be inhaled and may pose a risk for human health, specifically in susceptible populations. When inhaled, nanosized particles have been shown to translocate across pulmonary cell barriers to secondary organs, including the placenta. However, the potential for maternal-to-fetal translocation of nanosized-plastic particles and the impact of nanoplastic deposition or accumulation on fetal health remain unknown. In this study we investigated whether nanopolystyrene particles can cross the placental barrier and deposit in fetal tissues after maternal pulmonary exposure.

RESULTS

Pregnant Sprague Dawley rats were exposed to 20 nm rhodamine-labeled nanopolystyrene beads (2.64 × 10¹⁴ particles) via intratracheal instillation on gestational day (GD) 19. Twenty-four hours later on GD 20, maternal and fetal tissues were evaluated using fluorescent optical imaging. Fetal tissues were fixed for particle visualization with hyperspectral microscopy. Using isolated placental perfusion, a known concentration of nanopolystyrene was injected into the uterine artery. Maternal and fetal effluents were collected for 180 min and assessed for polystyrene particle concentration. Twenty-four hours after maternal exposure, fetal and placental weights were significantly lower (7 and 8%, respectively) compared with controls. Nanopolystyrene particles were detected in the maternal lung, heart, and spleen. Polystyrene nanoparticles were also observed in the placenta, fetal liver, lungs, heart, kidney, and brain suggesting maternal lung-to-fetal tissue nanoparticle translocation in late stage pregnancy.

CONCLUSION

These studies confirm that maternal pulmonary exposure to nanopolystyrene results in the translocation of plastic particles to placental and fetal tissues and renders the fetoplacental unit vulnerable to adverse effects. These data are vital to the understanding of plastic particulate toxicology and the developmental origins of health and disease.

Compromised Autophagic Effect of Polystyrene Nanoplastics Mediated by Protein Corona Was Recovered after Lysosomal Degradation of Corona

The adverse biological and ecological consequences of plastic debris have become a serious problem worldwide. Evidences have uncovered the accumulation of nanoplastics (NPs) in organisms. In a complex biological environment, proteins are prone to adsorbed onto the NPs' surface and form a protein corona layer, which mediates the interaction of NPs with cells. Here, we discovered the interaction of polystyrene (PS) NPs with protein fetal bovine serum (FBS) and altered cytotoxic effects. Mechanistically, prefabricated FBS protein corona mediated the relief of autophagic flux blockage, autophagosomes accumulation, and lysosomal damage in RAW264.7 cells caused by PS NPs. Using an individual fluorescent protein bovine serum albumin (BSA) as a corona surrogate, we demonstrated that coronal BSA remains, at least partially, on the surface of PS NPs during the initial stage of internalization and protects cell membrane from PS NPs-induced damage. However, along with the degradation of corona in lysosomes, reappearance of cytotoxicity was observed. Herein, we provided a proof of principle of the manipulation of corona on NPs' toxicity and we expect the result will promote the further safety assessment of NPs.