Probing the Structure of Single-Molecule Surface-Enhanced Raman Scattering Hot Spots

Aptamer-Adjusted Carbon Dot Catalysis-Silver Nanosol SERS Spectrometry for Bisphenol A Detection

Carbon dots (CDs) can be prepared from various organic (abundant) compounds that are rich in surfaces with –OH, –COOH, and –NH₂ groups. Therefore, CDs exhibit good biocompatibility and electron transfer ability, allowing flexible surface modification and accelerated electron transfer during catalysis. Herein, CDs were prepared using a hydrothermal method with fructose, saccharose, and citric acid as C sources and urea as an N dopant. The as-prepared CDs were used to catalyze AgNO₃–trisodium citrate (TSC) to produce Ag nanoparticles (AgNPs). The surface-enhanced Raman scattering (SERS) intensity increased with the increasing CDs concentration with Victoria blue B (VBB) as a signal molecule. The CDs exhibited a strong catalytic activity, with the highest activity shown by fructose-based CDs. After N doping, catalytic performance improved; with the passivation of a wrapped aptamer, the electron transfer was effectively disrupted (retarded). This resulted in the inhibition of the reaction and a decrease in the SERS intensity. When bisphenol A (BPA) was added, it specifically bound to the aptamer and CDs were released, recovering catalytical activity. The SERS intensity increased with BPA over the concentration range of 0.33–66.67 nmol/L. Thus, the aptamer-adjusted nanocatalytic SERS method can be applied for BPA detection.

Spontaneous formation of gold nanoparticles on MoS2 nanosheets and its impact on solution-processed optoelectronic devices

Understanding size-dependent properties of 2D materials is crucial for their optimized performance when incorporated through solution routes. In this work, the chemical nature of MoS₂ as a function of nanosheet size is investigated through the spontaneous reduction of chloroauric acid. Microscopy studies suggest higher gold nanoparticle decoration density in smaller nanosheet sizes, resulting from higher extent of reduction. Further corroboration through surface-enhanced Raman scattering using the gold-decorated MoS₂ nanosheets as substrates exhibited an enhancement factor of 1.55 × 10⁶ for smaller nanosheets which is 7-fold higher as compared to larger nanosheets. These plasmonic-semiconductor hybrids are utilized for photodetection, where decoration is found to impact the photoresponse of smaller nanosheets the most, and is optimized to achieve responsivity of 367.5 mAW^-1 and response times of ∼17 ms. The simplistic modification via solution routes and its impact on optoelectronic properties provides an enabling platform for 2D materials-based applications.

•

Reducing agent-free Au nanoparticle decoration on aqueously dispersed 2H-MoS₂.

•

Control on Au nanoparticle decoration density through nanosheet size-selection.

•

SERS as a probe for determining the decoration density along with microscopy.

•

Enhanced photodetection by spontaneous modification with Au on MoS₂ films.

Enhanced Raman scattering on two-dimensional palladium diselenide

Two-dimensional (2D) semiconductors with atomic layers, and a flat and active surface provide an attractive platform for the study of surface-enhanced Raman scattering (SERS). Many 2D layered materials, including graphene and transition metal dichalcogenide (TMD), have been exploited as potential Raman enhancers for SERS-based molecule sensing. Herein, atomically-thin palladium diselenide (PdSe₂) used as a SERS substrate for molecule detection was systematically studied. Stable Raman enhancement for molecules such as rhodamine 6G (R6G), crystal violet (CV), and rhodamine B (RhB) on few-layer PdSe₂ has been verified. A detection limit as low as 10^-9 M and an enhancement factor of 10⁵ for the R6G molecule on monolayer PdSe₂ are achieved. With the insertion of a thin Al₂O₃ layer, the Raman spectra confirm the predominant charge transfer mechanism for the large Raman enhancement. Furthermore, the strong thickness-dependent properties, good in-plane anisotropy and excellent air-stability of Raman enhancement are also explored for 2D PdSe₂. Our findings provide not only a promising Raman enhancement platform for sensing applications but also new insights into the chemical mechanism (CM) process of SERS.

In-situ monitoring the plasmon catalytic reaction of P-nitroaniline at gas-liquid-solid three phase interface

Localized surface plasmon resonance (LSPR) is caused by the irradiation of light on metal surface. Here we present a surface plasmon catalytic reaction at the gas-liquid-solid three phase interface. Electrochemical...

How gap distance between gold nanoparticles in dimers and trimers on metallic and non-metallic SERS substrates can impact signal enhancement

The impact of variation in the interparticle gaps in dimers and trimers of gold nanoparticles (AuNPs), modified with Raman reporter (2-MOTP), on surface-enhanced Raman scattering (SERS) intensity, relative to the SERS intensity of a single AuNP, is investigated in this paper. The dimers, trimers, and single particles are investigated on the surfaces of four substrates: gold (Au), aluminium (Al), silver (Ag) film, and silicon (Si) wafer. The interparticle distance between AuNPs was tuned by selecting mercaptocarboxylic acids of various carbon chain lengths when each acid forms a mixed SAM with 2-MOTP. The SERS signal quantification was accomplished by combining maps of SERS intensity from a Raman microscope, optical microscope images (×100), and maps/images from AFM or SEM. In total, we analysed 1224 SERS nanoantennas (533 dimers, 648 monomers, and 43 trimers). The average interparticle gaps were measured using TEM. We observed inverse exponential trends for the Raman intensity ratio and enhancement factor ratio versus gap distance on all substrates. Gold substrate, followed by silicon, showed the highest Raman intensity ratio (9) and dimer vs. monomer enhancement factor ratio (up to 4.5), in addition to the steepest inverse exponential curve. The results may help find a balance between SERS signal reproducibility and signal intensity that would be beneficial for future agglomerated NPs in SERS measurements. The developed method of 3 to 1 map combination by an increase in image transparency can be used to study structure-activity relationships on various substrates in situ, and it can be applied beyond SERS microscopy.

The efficiency of photothermal action of gold shell-isolated nanoparticles against tumor cells depends on membrane interactions

Photoinduced hyperthermia with nanomaterials has been proven effective in photothermal therapy (PTT) of tumor tissues, but a precise control in PTT requires determination of the molecular-level mechanisms. In this paper, we determined the mechanisms responsible for the action of photoexcited gold shell-isolated nanoparticles (AuSHINs) in reducing the viability of MCF7 (glandular breast cancer) and especially A549 (lung adenocarcinoma) cells in vitro experiments, while the photoinduced damage to healthy cells was much smaller. The photoinduced effects were more significant than using other nanomaterials, and could be explained by the different effects from incorporating AuSHINs on Langmuir monolayers from lipid extracts of tumoral (MCF7 and A549) and healthy cells. The incorporation of AuSHINs caused similar expansion of the Langmuir monolayers, but Fourier-transform infrared spectroscopy (FTIR) data of Langmuir-Schaefer films (LS) indicated distinct levels of penetration into the monolayers. AuSHINs penetrated deeper into the A549 extract monolayers, affecting the vibrational modes of polar groups and carbon chains, while in MCF7 monolayers penetration was limited to the surroundings of the polar groups. Even smaller insertion was observed for monolayers of the healthy cell extract. The photochemical reactions were modulated by AuSHINs penetration, since upon irradiation the surface area of A549 monolayer decreased owing to lipid chain cleavage by oxidative reactions. For MCF7 monolayers, hydroperoxidation under illumination led to a ca. 5% increase in surface area. The monolayers of healthy cell lipid extract were barely affected by irradiation, consistent with the lowest degree of AuSHINs insertion. In summary, efficient photothermal therapy may be devised by producing AuSHINs capable of penetrating the chain region of tumor cell membranes.

Surface Enhanced Raman Spectroscopy: Applications in Agriculture and Food Safety

Recent global warming has resulted in shifting of weather patterns and led to intensification of natural disasters and upsurges in pests and diseases. As a result, global food systems are under pressure and need adjustments to meet the change—often by pesticides. Unfortunately, such agrochemicals are harmful for humans and the environment, and consequently need to be monitored. Traditional detection methods currently used are time consuming in terms of sample preparation, are high cost, and devices are typically not portable. Recently, Surface Enhanced Raman Scattering (SERS) has emerged as an attractive candidate for rapid, high sensitivity and high selectivity detection of contaminants relevant to the food industry and environmental monitoring. In this review, the principles of SERS as well as recent SERS substrate fabrication methods are first discussed. Following this, their development and applications for agrifood safety is reviewed, with focus on detection of dye molecules, melamine in food products, and the detection of different classes of pesticides such as organophosphate and neonicotinoids.

Construction of Optimal SERS Hotspots Based on Capturing the Spike Receptor-Binding Domain (RBD) of SARS-CoV-2 for Highly Sensitive and Specific Detection by a Fish Model

It is highly challenging to construct the best SERS hotspots for the detection of proteins by surface-enhanced Raman spectroscopy (SERS). Using its own characteristics to construct hotspots can achieve the effect of sensitivity and specificity. In this study, we built a fishing mode device to detect the receptor-binding domain (RBD) of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) at low concentrations in different detection environments and obtained a sensitive SERS signal response. Based on the spatial resolution of proteins and their protein-specific recognition functions, SERS hotspots were constructed using aptamers and small molecules that can specifically bind to RBD and cooperate with Au nanoparticles (NPs) to detect RBD in the environment using SERS signals of beacon molecules. Therefore, two kinds of AuNPs modified with aptamers and small molecules were used in the fishing mode device, which can specifically recognize and bind RBD to form a stable hotspot to achieve high sensitivity and specificity for RBD detection. The fishing mode device can detect the presence of RBD at concentrations as low as 0.625 ng/mL and can produce a good SERS signal response within 15 min. Meanwhile, we can detect an RBD of 0.625 ng/mL in the mixed solution with various proteins, and the concentration of RBD in the complex environment of urine and blood can be as low as 1.25 ng/mL. This provides a research basis for SERS in practical applications for protein detection work.

Facial Fabrication of Large-Scale SERS-Active Substrate Based on Self-Assembled Monolayer of Silver Nanoparticles on CTAB-Modified Silicon for Analytical Applications

Surface-enhanced Raman spectroscopy (SERS) has been proven to be a promising analytical technique with sensitivity at the single-molecule level. However, one of the key problems preventing its real-world application lies in the great challenges that are encountered in the preparation of large-scale, reproducible, and highly sensitive SERS-active substrates. In this work, a new strategy is developed to fabricate an Ag collide SERS substrate by using cetyltrimethylammonium bromide (CTAB) as a connection agent. The developed SERS substrate can be developed on a large scale and is highly efficient, and it has high-density “hot spots” that enhance the yield enormously. We employed 4-methylbenzenethiol(4-MBT) as the SERS probe due to the strong Ag–S linkage. The SERS enhancement factor (EF) was calculated to be ~2.6 × 10⁶. The efficacy of the proposed substrate is demonstrated for the detection of malachite green (MG) as an example. The limit of detection (LOD) for the MG assay is brought down to 1.0 × 10⁻¹¹ M, and the relative standard deviation (RSD) for the intensity of the main Raman vibration modes (1620, 1038 cm⁻¹) is less than 20%.

Recent advances in plasmonic Prussian blue-based SERS nanotags for biological application

The reliability and reproducibility of surface-enhanced Raman scattering (SERS) technology is still a great challenge in bio-related analysis. Prussian blue (PB)-based SERS tags have attracted increasing interest for improving these deficiencies due to its unique Raman band (near 2156 cm-1) in the Raman-silent region, providing zero-background bio-Raman labels without interference from endogenous biomolecules. Moreover, the stable PB shell consisting of multiple layers of CN- reporters ensure a stable and strong Raman signal output, avoiding the desorption of the Raman reporter from the plasmonic region by the competitive adsorption of the analyte. More importantly, they possess outstanding multiplexing potential in biological analysis owing to the adjustable Raman shift with unique narrow spectral widths. Despite more attention having been attracted to the structure and preparation of PB-based SERS tags for their better biological applications over the past five years, there is still a great challenge for SERS suitable for applications in the actual environment. The biological applications of PB-based SERS tags are comprehensively recounted in this minireview, mainly focusing on quantification analysis, multiple-spectral analysis and cell-imaging joint phototherapy. The prospects of PB-based SERS tags in clinical diagnosis and treatment are also discussed. This review aims to draw attention to the importance of SERS tags and provide a reference for the design and application of PB-based SERS tags in future bio-applications.

Fabrication of a Wearable Flexible Sweat pH Sensor Based on SERS-Active Au/TPU Electrospun Nanofibers

Development of wearable sensing platforms is essential for the advancement of continuous health monitoring and point-of-care testing. Eccrine sweat pH is an analyte that can be noninvasively measured and used to diagnose and aid in monitoring a wide range of physiological conditions. Surface-enhanced Raman scattering (SERS) offers a rapid, optical technique for fingerprinting of biomarkers present in sweat. In this paper, a mechanically flexible, nanofibrous, SERS-active substrate was fabricated by a combination of electrospinning of thermoplastic polyurethane (TPU) and Au sputter coating. This substrate was then investigated for suitability toward wearable sweat pH sensing after functionalization with two commonly used pH-responsive molecules, 4-mercaptobenzoic acid (4-MBA), and 4-mercaptopyridine (4-MPy). The developed SERS pH sensor was found to have good resolution (0.14 pH units for 4-MBA; 0.51 pH units for 4-MPy), with only 1 μL of sweat required for a measurement, and displayed no statistically significant difference in performance after 35 days (p = 0.361). Additionally, the Au/TPU nanofibrous SERS pH sensors showed fast sweat-absorbing ability as well as good repeatability and reversibility. The proposed methodology offers a facile route for the fabrication of SERS substrates which could also be used to measure a wide range of health biomarkers beyond sweat pH.

Synthesis, Assembly, Optical Properties, and Sensing Applications of Plasmonic Gap Nanostructures

Plasmonic gap nanostructures (PGNs) have been extensively investigated mainly because of their strongly enhanced optical responses, which stem from the high intensity of the localized field in the nanogap. The recently developed methods for the preparation of versatile nanogap structures open new avenues for the exploration of unprecedented optical properties and development of sensing applications relying on the amplification of various optical signals. However, the reproducible and controlled preparation of highly uniform plasmonic nanogaps and the prediction, understanding, and control of their optical properties, especially for nanogaps in the nanometer or sub-nanometer range, remain challenging. This is because subtle changes in the nanogap significantly affect the plasmonic response and are of paramount importance to the desired optical performance and further applications. Here, recent advances in the synthesis, assembly, and fabrication strategies, prediction and control of optical properties, and sensing applications of PGNs are discussed, and perspectives toward addressing these challenging issues and the future research directions are presented.

Optical nanoantenna with muitiple surface plasmon resonances for enhancements in near-field intensity and far-field radiation

Plasmonic nanostructures with dual surface plasmon resonances capable of simultaneously realizing strong light confinement and efficient light radiation are attractive for light-matter interaction and nanoscale optical detection. Here, we propose an optical nanoantenna by adding gold nanoring to the conventional Fano-type resonance antenna. With the help of gold nanoring, the following improvements are simultaneously realized: (1). The near-field intensity of the Fano-type antenna is further enhanced by the Fabry Perot-like resonance formed by the combination of the gold nanoring and the substrate waveguide layer. (2). Directional radiation is realized by the collaboration of the gold nanoring and the Fano-type antenna, thus improving the collection efficiency of the far-field signal. (3). The multi-wavelength tunable performance of the Fano resonance antenna is significantly improved by replacing the superradiation mode in the Fano resonance with the dipole resonance induced by the gold nanoring. The optical properties of the nanoantennas are demonstrated by numerical simulations and practical devices. Therefore, the proposed optical nanoantenna provides a new idea for further improving the performance of conventional Fano-type nanoantennas and opens new horizons for designing plasmonic devices with enhancements in both near- and far-field functionalities, which can be applied in a wide range of applications such as surface-enhanced spectroscopy, photoluminescence, nonlinear nanomaterials/emitters and biomedicine sensing.

Target-Triggered Nanomaterial Self-Assembly Induced Electromagnetic Hot-Spot Generation for SERS-Fluorescence Dual-Mode In Situ Monitoring MiRNA-Guided Phototherapy

A multifunctional theranostic nanosystem that integrates dynamic monitoring and therapeutic functions is necessary for precision tumor medicine. Herein, an entropy-driven self-assembly nanomachine is developed that overcomes the mechanism differences of different diagnostic modes and is applied to miRNA surface-enhanced Raman scattering (SERS)-fluorescence dual-mode dynamic monitoring and synergy phototherapy. It is worth noting that the activated dual-mode theranostic nanosystem (DTN) is capable of tumor in situ fluorescence imaging and SERS absolute quantification of the target. After being internalized into tumor cells, the DTN nanosystem is activated by the DNA cascade chain displacement of the target miR-21, resulting in the secondary release of fluorophores and the assembly of core-satellite structures (CS structures). The coupling of localized surface plasmon resonances (LSPRs) in the CS structure results in the formation of numerous enhanced electric fields (hot spot) in the nanogap of the CS structure. Then the DTN nanosystem greatly improves the sensitivity and repeatability of Raman detection by converting trace targets into numerous adenines residing in the electromagnetic hot spot of the CS structure. Meanwhile, the CS structure and the loaded photosensitizer are used for synergy phototherapy under the guidance of fluorescence imaging. This proposed strategy is confirmed by in vivo and in vitro results, and it provides new ideas for tumor SERS-fluorescence dual-mode diagnosis and effective tumor therapy.

Multiarchitecture-Based Plasmonic-Coupled Emission Employing Gold Nanoparticles: An Efficient Fluorescence Modulation and Biosensing Platform

Surface plasmon-coupled emission (SPCE) is an efficient surface-enhanced fluorescence method based on the near-field coupling process of surface plasmons and fluorophores. Based on this, we developed multiple coupling structures for an SPCE system by introducing gold nanoparticles (AuNPs) with different architectures by adjusting different modification methods and configurations. By assembling AuNPs on a gold substrate through electrostatic adsorption and spin-coating, 40- and 55-fold enhancements were obtained compared to free space (FS) emission, respectively. After theoretical simulations and the optimization of experimental conditions, a novel "hot-spot" plasmonic structure, an intense electromagnetic field within the system, plasmonic properties, and the coupled process were found to be mainly responsible for the diverse enhancement effects observed. For the spin-coating deposition method, new enhancing systems with high efficiency can be easily built without complex modification. Additionally, the subsequent detection system based on the uniform modification of AuNPs through electrostatic adsorption is convenient to establish with high sensitivity and stability, which can broaden the application of SPCE in both fluorescence-based sensing and imaging. This AuNP-enhanced SPCE using an electrostatic adsorption method was designed as an immunosensor to prove feasibility.

Simple but accurate estimation of light-matter coupling strength and optical loss for a molecular emitter coupled with photonic modes

Light-matter coupling strength and optical loss are two key physical quantities in cavity quantum electrodynamics (CQED), and their interplay determines whether light-matter hybrid states can be formed or not in chemical systems. In this study, by using macroscopic quantum electrodynamics (MQED) combined with a pseudomode approach, we present a simple but accurate method, which allows us to quickly estimate the light-matter coupling strength and optical loss without free parameters. Moreover, for a molecular emitter coupled with photonic modes (including cavity modes and plasmon polariton modes), we analytically and numerically prove that the dynamics derived from the MQED-based wavefunction approach is mathematically equivalent to the dynamics governed by the CQED-based Lindblad master equation when the Purcell factor behaves like Lorentzian functions.

Development of shipboard automatic flow injection analysis-Surface-enhanced Raman spectroscopy instrument toward onsite detection of trace polycyclic aromatic hydrocarbons in water environment

The qualitative and quantitative analysis of polycyclic aromatic hydrocarbons (PAHs) has been important for the environmental control of persistent organic pollutants for decades. Considering the potential risk of deterioration, degradation, and external pollution during transportation, the development of rapid and onsite detection of trace PAHs is in demand. Here, taking the advantage of high sensitivity of surface-enhanced Raman spectroscopy (SERS), we developed a shipboard instrument by combining a portable Raman instrument and a flow injection device, integrating the sample pretreatment and target detection step by step. The feasibility of the instrument was demonstrated by detecting trace benzo[a]pyrene from different water environments with the lowest detection concentration less than 1 µg/l. The reliable stability and repeatability indicate that in the case of emergency response, the developed flow injection analysis-SERS instrument is very promising for the quantitative and qualitative analysis of diverse organic pollutants other than PAHs in water environments.

Localized quenching sites in MAPbI3 investigated by fluorescence and photothermal microscopy

In this work, we developed a fluorescence and photothermal microscope with extremely large scanning range and high spatial resolution. We demonstrated the capability of this instrument by simultaneously measuring the photoluminescence and photothermal signals of the CH₃NH₃PbI₃ (MAPbI₃) film. After scanning the MAPbI₃ film on the scale of centimeters, we can obtain information of both emissive and nonemissive processes with a resolution of 200 nm at any location of the large area. We can clearly see the localized photothermal signal while the photoluminescence signal is uniform. These results directly prove that the emissive recombination happens all over the materials, but the nonemissive recombination happens only at certain localized quenching sites. The fluorescence and photothermal microscope with both large scanning range and high spatial resolution can provide information of all the relaxation channels of the excitons, showing potential applications for investigation of photophysical mechanisms in photoelectric materials.

Surface-enhanced Raman spectroscopy for bioanalysis and diagnosis

In recent years, bioanalytical surface-enhanced Raman spectroscopy (SERS) has blossomed into a fast-growing research area. Owing to its high sensitivity and outstanding multiplexing ability, SERS is an effective analytical technique that has excellent potential in bioanalysis and diagnosis, as demonstrated by its increasing applications in vivo. SERS allows the rapid detection of molecular species based on direct and indirect strategies. Because it benefits from the tunable surface properties of nanostructures, it finds a broad range of applications with clinical relevance, such as biological sensing, drug delivery and live cell imaging assays. Of particular interest are early-stage-cancer detection and the fast detection of pathogens. Here, we present a comprehensive survey of SERS-based assays, from basic considerations to bioanalytical applications. Our main focus is on SERS-based pathogen detection methods as point-of-care solutions for early bacterial infection detection and chronic disease diagnosis. Additionally, various promising in vivo applications of SERS are surveyed. Furthermore, we provide a brief outlook of recent endeavours and we discuss future prospects and limitations for SERS, as a reliable approach for rapid and sensitive bioanalysis and diagnosis.

Optimization of High-Density Fe-Au Nano-Arrays for Surface-Enhanced Raman Spectroscopy of Biological Samples

The method of realizing nanostructures using porous alumina templates has attracted interest due to the precise geometry and cheap cost of nanofabrication. In this work, nanoporous alumina membranes were utilized to realize a forest of nanowires, providing a bottom-up nanofabrication method suitable for surface-enhanced Raman spectroscopy (SERS). Gold and iron were electroplated through the straight channels of the membrane. The resulting nanowires are, indeed, made of an active element for plasmonic resonance and SERS as the hexagonal distribution of the nanowires and the extreme high density of the nanowires allows to excite the plasmon and detect the Raman signal. The method to reduce the distance between pores and, consequently, the distance of the nanowires after electrodeposition is optimized here. Indeed, it has been predicted that the light intensity enhancement factor is up to 10¹² when the gap is small than 10 nm. Measurements of Raman signal of thiol groups drying on the gold nanowires show that the performance of the device is improved. As the thiol group can be linked to proteins, the device has the potential of a biosensor for the detection of a few biomolecules. To assess the performance of the device and demonstrate its ability to analyze biological solutions, we used it as SERS substrates to examine solutions of IgG in low abundance ranges. The results of the test indicate that the sensor can convincingly detect biomolecules in physiologically relevant ranges.

Biosensing Applications Using Nanostructure-Based Localized Surface Plasmon Resonance Sensors

Localized surface plasmon resonance (LSPR)-based biosensors have recently garnered increasing attention due to their potential to allow label-free, portable, low-cost, and real-time monitoring of diverse analytes. Recent developments in this technology have focused on biochemical markers in clinical and environmental settings coupled with advances in nanostructure technology. Therefore, this review focuses on the recent advances in LSPR-based biosensor technology for the detection of diverse chemicals and biomolecules. Moreover, we also provide recent examples of sensing strategies based on diverse nanostructure platforms, in addition to their advantages and limitations. Finally, this review discusses potential strategies for the development of biosensors with enhanced sensing performance.

Spectroscopy-Assisted Label-free Molecular Analysis of Live Cell Surface with Vertically Aligned Plasmonic Nanopillars

A generalized label-free platform for surface-selective molecular sensing in living cells can transform the ability to examine complex events in the cell membrane. While vertically aligned semiconductor and metal-semiconductor hybrid nanopillars have rapidly surfaced for stimulating and probing the intracellular environment, the potential of such constructs for selectively interrogating the cell membrane is surprisingly underappreciated. In this work, a new platform, entitled nano-PROD (nano-pillar based Raman optical detection), enables molecular recording by probing fundamental vibrational modes of membrane constituents of cells adherent on a large-area silver-coated silicon nanopillar substrate fabricated using a precursor solution-based nanomanufacturing process. It is shown that the nano-PROD platform sustains live cells in near-physiological conditions, which can be directly profiled using surface-enhanced Raman spectroscopy due to the confined electromagnetic field enhancement. The experimental results highlight the utility of the platform in probing specific cell surface markers for accurately recognizing the phenotypically identical prostate cancer cells, differing only in prostate-specific membrane antigen expression. Due to its tunability, nano-PROD has the promise to be readily extendable to other applications that can leverage its unique combination of nanoscale topographic features and molecular sensing capabilities, from stain-free cytopathology inspection to understanding spatio-mechanical regulation in membrane receptor function.

Between plasmonics and surface-enhanced resonant Raman spectroscopy: toward single-molecule strong coupling at a hotspot

The purpose of this minireview is to build a bridge between two research fields: surface-enhanced resonant Raman spectroscopy (SERRS) under near-single-molecule conditions and the branch of plasmonics treating strong coupling between plasmons and molecular excitons. SERRS enables single-molecule spectroscopy owing to its significant enhancement at SERRS hotspots (HSs), localized at gaps or junctions between plasmonic nanoparticle aggregates. SERRS is SERS (surface enhanced Raman spectroscopy) under a resonant Raman excitation condition. The origin of the Raman enhancement in SERRS is electromagnetic coupling between plasmons and molecular excitons at HSs. It has been reported that the coupling energy at HSs reaches the strong coupling region, meaning that they are potential platforms for applications of single molecular excitons modified by strong coupling. In this review, we discuss recent progress related to electronic strong coupling in near-single-molecule SERRS: collective (e.g., vibrational) strong coupling is out of the scope of this minireview. First, we explain the relationship between the electromagnetic enhancement factor and coupling energy. Second, we introduce three theoretical methods for obtaining evidence of strong coupling at HSs. Third, we discuss a method for reproducing enhanced and modified molecular Raman and fluorescence spectra at HSs using the coupling energy. Finally, we propose the use of two experimental methods of absorption spectroscopy at HSs for modifying molecular electronic dynamics by strong coupling and comment on future applications of SERRS HSs to photophysics and photochemistry.

Investigations of Shape, Material and Excitation Wavelength Effects on Field Enhancement in SERS Advanced Tips

This article, a part of the larger research project of Surface-Enhanced Raman Scattering (SERS), describes an advanced study focusing on the shapes and materials of Tip-Enhanced Raman Scattering (TERS) designated to serve as part of a novel imager device. The initial aim was to define the optimal shape of the "probe": tip or cavity, round or sharp. The investigations focused on the effect of shape (hemi-sphere, hemispheroid, ellipsoidal cavity, ellipsoidal rod, nano-cone), and the effect of material (Ag, Au, Al) on enhancement, as well as the effect of excitation wavelengths on the electric field. Complementary results were collected: numerical simulations consolidated with analytical models, based on solid assumptions. Preliminary experimental results of fabrication and structural characterization are also presented. Thorough analyses were performed around critical parameters, such as the plasmonic metal-Silver, Aluminium or Gold-using Rakic model, the tip geometry-sphere, spheroid, ellipsoid, nano-cone, nano-shell, rod, cavity-and the geometry of the plasmonic array: cross-talk in multiple nanostructures. These combined outcomes result in an optimized TERS design for a large number of applications.

Ligand-Free Fabrication of Ag Nanoassemblies for Highly Sensitive and Reproducible Surface-Enhanced Raman Scattering Sensing of Antibiotics

The assemblies of plasmonic nanoparticles (NPs) are the universal methods for enhancing their surface-enhanced Raman scattering (SERS) activities. However, the present methods suffer from the problems of poor reproducibility, complicated fabrication, or the adsorption of ligands on the surface, which limit their practical applications. In this work, by using a facile freeze-thaw method, we are able to fabricate the assemblies of Ag NPs with highly reproducible SERS activity without the use of ligands. Moreover, the Ag NPs can be well kept in a frozen state for a long time with few influences on the reproducibility (relative standard deviation, RSD ca. 7%), while those kept in colloid (4 °C) suffer from gradual surface oxidation and aggregation. Such a simple freeze-thaw method does not require the introduction of any ligands (or linkers) with long-term stability and reproducibility, implying its wide applications in practical SERS sensing.

Therapeutic strategies and potential implications of silver nanoparticles in the management of skin cancer

Skin cancer (SC) is the most common carcinoma affecting 3 million people annually in the United States and millions of people worldwide. It is classified as melanoma SC (MSC) and non-melanoma SC (NMSC). NMSC represents approximately 80% of SC and includes squamous cell carcinoma and basal cell carcinoma. MSC, however, has a higher mortality rate than SC because of its ability to metastasize. SC is a major health problem in the United States with significant morbidity and mortality in the Caucasian population. Treatment options for SC include cryotherapy, excisional surgery, Mohs surgery, curettage and electrodessication, radiation therapy, photodynamic therapy, immunotherapy, and chemotherapy. Treatment is chosen based on the type of SC and the potential for side effects. Novel targeted therapies are being used with increased frequency for large tumors and for metastatic disease. A scoping literature search on PubMed, Google Scholar, and Cancer Registry websites revealed that traditional chemotherapeutic drugs have little effect against SC after the cancer has metastasized. Following an overview of SC biology, epidemiology, and treatment options, this review focuses on the mechanisms of advanced technologies that use silver nanoparticles in SC treatment regimens.

Flexible Surface-Enhanced Raman Scattering Chip: A Universal Platform for Real-Time Interfacial Molecular Analysis with Femtomolar Sensitivity

We propose and demonstrate a flexible surface-enhanced Raman scattering (SERS) chip as a versatile platform for femtomolar detection and real-time interfacial molecule analysis. The flexible SERS chip is composed of a flexible and transparent membrane and embedded plasmonic dimers with ultrahigh particle density and ultrasmall dimer gap. The chip enables rapid identification for residuals on solid substrates with irregular surfaces or dissolved analytes in aqueous solution. The sensitivity for liquid-state measurement is down to 0.06 molecule per dimers for 10^-14 mol·L^-1 Rhodamine 6G molecule without molecule enrichment. Strong signal fluctuation and blinking are observed at this concentration, indicating that the detection limit is close to the single-molecule level. Meanwhile, the homogeneous liquid environment facilities accurate SERS quantification of analytes with a wide dynamic range. The synergy of flexibility and liquid-state measurement opens up avenues for the real-time study of chemical reactions. The reduction from p-nitrothiophenol (PNTP) to p-aminothiophenol (PATP) in the absence of the chemical reducing agents is observed at liquid interfaces by in situ SERS measurements, and the plasmon-induced hot electron is demonstrated to drive the catalytic reaction. We believe this robust and feasible approach is promising in extending the SERS technique as a general method for identifying interfacial molecular traces, tracking the evolution of heterogeneous reactions, elucidating the reaction mechanisms, and evaluating the environmental effects such as pH value and salty ions in SERS.

Surface-enhanced Raman scattering holography

Nanometric probes based on surface-enhanced Raman scattering (SERS) are promising candidates for all-optical environmental, biological and technological sensing applications with intrinsic quantitative molecular specificity. However, the effectiveness of SERS probes depends on a delicate trade-off between particle size, stability and brightness that has so far hindered their wide application in SERS imaging methodologies. In this Article, we introduce holographic Raman microscopy, which allows single-shot three-dimensional single-particle localization. We validate our approach by simultaneously performing Fourier transform Raman spectroscopy of individual SERS nanoparticles and Raman holography, using shearing interferometry to extract both the phase and the amplitude of wide-field Raman images and ultimately localize and track single SERS nanoparticles inside living cells in three dimensions. Our results represent a step towards multiplexed single-shot three-dimensional concentration mapping in many different scenarios, including live cell and tissue interrogation and complex anti-counterfeiting applications.

Surface Enhanced Raman Scattering Revealed by Interfacial Charge-Transfer Transitions

Surface enhanced Raman scattering (SERS) is a fingerprint spectral technique whose performance is highly dependent on the physicochemical properties of the substrate materials. In addition to the traditional plasmonic metal substrates that feature prominent electromagnetic enhancements, boosted SERS activities have been reported recently for various categories of non-metal materials, including graphene, MXenes, transition-metal chalcogens/oxides, and conjugated organic molecules. Although the structural compositions of these semiconducting substrates vary, chemical enhancements induced by interfacial charge transfer are often the major contributors to the overall SERS behavior, which is distinct from that of the traditional SERS based on plasmonic metals. Regarding charge-transfer-induced SERS enhancements, this short review introduces the basic concepts underlying the SERS enhancements, the most recent semiconducting substrates that use novel manipulation strategies, and the extended applications of these versatile substrates.

Theory of molecular emission power spectra. I. Macroscopic quantum electrodynamics formalism

We study the emission power spectrum of a molecular emitter with multiple vibrational modes in the framework of macroscopic quantum electrodynamics. The theory we present is general for a molecular spontaneous emission spectrum in the presence of arbitrary inhomogeneous, dispersive, and absorbing media. Moreover, the theory shows that the molecular emission power spectra can be decomposed into the electromagnetic environment factor and lineshape function. In order to demonstrate the validity of the theory, we investigate the lineshape function in two limits. In the incoherent limit (single molecules in a vacuum), the lineshape function exactly corresponds to the Franck-Condon principle. In the coherent limit (single molecules strongly coupled with single polaritons or photons) together with the condition of high vibrational frequency, the lineshape function exhibits a Rabi splitting, the spacing of which is exactly the same as the magnitude of exciton-photon coupling estimated by our previous theory [S. Wang et al., J. Chem. Phys. 151, 014105 (2019)]. Finally, we explore the influence of exciton-photon and electron-phonon interactions on the lineshape function of a single molecule in a cavity. The theory shows that the vibronic structure of the lineshape function does not always disappear as the exciton-photon coupling increases, and it is related to the loss of a dielectric environment.

Surface-Enhanced Raman Spectroscopy for Rapid Screening of Cinnamon Essential Oils

Cinnamon essential oil is used in food flavoring, food preservation, and for complementary medicine. The most common types of cinnamon used in essential oils are true cinnamon (Cinnamomum verum) and cassia cinnamon (Cinnamomum cassia). True cinnamon is commonly adulterated with cassia cinnamon because it is cheaper. However, cassia cinnamon contains higher concentrations of coumarin which has been shown to have adverse health effects. There is a need to develop simple, nondestructive, rapid screening methods for quality control and food authentication and to identify adulteration of cinnamon essential oil. Currently, the most common methods to screen for coumarin in cinnamon include high-performance liquid chromatography (HPLC) and gas chromatography (GC). However, these methods require time-consuming sample preparation and detection. Vibrational spectroscopy methods are emerging as a promising alternative for rapid, nondestructive screening for food safety applications. In this study, a rapid screening method has been developed to examine cinnamon essential oils using surface-enhanced Raman spectroscopy (SERS). The experimental spectra were compared to theoretical calculations using the DFT method BP86/6-311++G(d,p) basis set. The limit of detection of coumarin was determined to be 1 × 10^-6 M or 1.46 mg/L using SERS with colloid paste substrates. Furthermore, 1:16 dilutions of cinnamaldehyde and 1:8 dilutions of eugenol were detected using SERS which can help determine if the cinnamon essential oil was made from bark or from leaves. Seven commercially available cinnamon essential oils were also analyzed and compared to reference solutions. SERS was able to discriminate between essential oils primarily composed of cinnamaldehyde and those composed of eugenol. Furthermore, the SERS method detected peaks that are attributed to coumarin in two of the commercially available samples. To date, this is the first time SERS has been used to rapidly screen cinnamon essential oils.

Nano-substructured plasmonic pore arrays: a robust, low cost route to reproducible hierarchical structures extended across macroscopic dimensions

Plasmonic nanostructures are important across diverse applications from sensing to renewable energy. Periodic porous array structures are particularly attractive because such topography offers a means to encapsulate or capture solution phase species and combines both propagating and localised plasmonic modes offering versatile addressability. However, in analytical spectroscopic applications, periodic pore arrays have typically reported weaker plasmonic signal enhancement compared to particulate structures. This may be addressed by introducing additional nano-structuring into the array to promote plasmonic coupling that promotes electric field-enhancement, whilst retaining pore structure. Introducing nanoparticle structures into the pores is a useful means to promote such coupling. However, current approaches rely on either expensive top-down methods or on bottom-up methods that yield random particle placement and distribution. This report describes a low cost, top-down technique for preparation of nano-sub-structured plasmonic pore arrays in a highly reproducible manner that can be applied to build arrays extending over macroscopic areas of mm2 to cm2. The method exploits oxygen plasma etching, under controlled conditions, of the cavity encapsulated templating polystyrene (PS) spheres used to create the periodic array. Subsequent metal deposition leads to reproducible nano-structuring within the wells of the pore array, coined in-cavity nanoparticles (icNPs). This approach was demonstrated across periodic arrays with pore/sphere diameters ranging from 500 nm to 3 μm and reliably improved the plasmonic properties of the substrate across all array dimensions compared to analogous periodic arrays without the nano-structuring. The enhancement factors achieved for metal enhanced emission and surface enhanced Raman spectroscopy depended on the substrate dimensions, with the best performance achieved for nanostructured 2 μm diameter pore arrays, where a more than 104 improvement over Surface Enhanced Raman Spectroscopy (SERS) and 200-fold improvement over Metal Enhanced Fluorescence (MEF) were observed for these substrates compared with analogous unmodified pore arrays. The experiments were supported by Finite-Difference Time-Domain (FDTD) calculations used to simulate the electric field distribution as a function of pore nano-structuring.

ECO-FRIENDLY hybrid hydrogels for detection of phenolic RESIDUES in water using SERS

Herein is presented a simple and sensible method to determine organic pollutants in water, based on the utilization of silver nanoparticles (AgNPs) loaded in Polyacrylamide (PAAm)/starch hybrid hydrogels combined with surface-enhanced Raman scattering (SERS) spectroscopy. The materials were characterized by swelling degree studies, UV-Visible spectroscopy (UV-Vis), X-ray diffraction (XRD) and scanning electron microscopy (SEM). PAAm/starch hydrogels showed variable swelling capacity, according to the synthetic molar composition. The most promising results were attributed to lower concentrations of starch and crosslink agent (N,N'-methylenebisacrylamide - MBA). Spectroscopic analysis confirmed the formation of AgNPs, by noticing the peak at around 420 nm, due to its surface plasmon resonance (SPR) effect. The results showed that AgNPs were stabilized by hydrogels networks. The average size of the AgNPs was smaller than 100 nm and the size and quantity of nanoparticles were influenced by the molar composition of the hydrogel matrix. The SERS substrate based on the AgNPs-PAAm/starch exhibited reproducibility, stability, and limit of detection (LOD) of phenol in water of 1 × 10^-8 M. The average mass of AgNPs-PAAm/starch hydrogels used for each detection analysis was around 10 mg. The spectra with enhanced intensities were possible due to a large number of hot spots generated on the AgNPs-PAAm/starch hydrogel substrate, which leads to potential use for organic pollutant detection. In addition, there is also the possibility of reusing the hydrogel matrix substrate in other analyzes.

Nanoscale optical imaging in chemistry

Single-molecule-level measurements are bringing about a revolution in our understanding of chemical and biochemical processes. Conventional measurements are performed on large ensembles of molecules. Such ensemble-averaged measurements mask molecular-level dynamics and static and dynamic fluctuations in reactivity, which are vital to a holistic understanding of chemical reactions. Watching reactions on the single-molecule level provides access to this otherwise hidden information. Sub-diffraction-limited spatial resolution fluorescence imaging methods, which have been successful in the field of biophysics, have been applied to study chemical processes on single-nanoparticle and single-molecule levels, bringing us new mechanistic insights into physiochemical processes. However, the scope of chemical processes that can be studied using fluorescence imaging is considerably limited; the chemical reaction has to be designed such that it involves fluorophores or fluorogenic probes. In this article, we review optical imaging modalities alternative to fluorescence imaging, which expand greatly the range of chemical processes that can be probed with nanoscale or even single-molecule resolution. First, we show that the luminosity, wavelength, and intermittency of solid-state photoluminescence (PL) can be used to probe chemical transformations on the single-nanoparticle-level. Next, we highlight case studies where localized surface plasmon resonance (LSPR) scattering is used for tracking solid-state, interfacial, and near-field-driven chemical reactions occurring in individual nanoscale locations. Third, we explore the utility of surface- and tip-enhanced Raman scattering to monitor individual bond-dissociation and bond-formation events occurring locally in chemical reactions on surfaces. Each example has yielded some new understanding about molecular mechanisms or location-to-location heterogeneity in chemical activity. The review finishes with new and complementary tools that are expected to further enhance the scope of knowledge attainable through nanometer-scale resolution chemical imaging.

Plasmonics meets super-resolution microscopy in biology

Super-resolution microscopy can reveal the subtle biological processes hidden behind the optical diffraction barrier. Plasmonics is a key nanophotonic that combines electronics and photonics through the interaction of light with the metallic nanostructure. In this review, we survey the recent progresses on plasmonic-assisted super-resolution microscopy. The strong electromagnetic field enhancement trapped near metallic nanostructures offers a unique opportunity to manipulate the illumination scheme for overcoming the diffraction limit. Plasmonic nanoprobes, exploited as surface-enhanced Raman scattering (SERS) and plasmon-enhanced fluorescence nanoparticles, are a major category of contrast agent in super-resolution microscopy. The outstanding challenges, future developments, and potential biological applications are also discussed.

Encapsulation of 3D plasmonic nanostructures with ultrathin hydrogel skin for rapid and direct detection of toxic small molecules in complex fluids

Nanogap-rich 3D plasmonic nanostructures provide enhanced molecular Raman fingerprints in a nondestructive and label-free manner. However, the molecular detection of small target molecules in complex fluids is challenging due to nonspecific protein adsorption, which prevents access of the target molecules. Therefore, the molecular detection for complex mixtures usually requires a tedious and time-consuming pretreatment of samples. Herein, we report the encapsulation of 3D plasmonic nanostructures with an ultrathin hydrogel skin for the rapid and direct detection of small molecules in complex mixtures. To demonstrate the proof of concept, we directly detect pesticide dissolved in milk without pretreatment. This detection is enabled by the selective permeation of target molecules into the 3D mesh of the hydrogel skin and the adsorption onto plasmonic hotspots, accompanied by the rejection of large adhesive proteins and colloids. The high sensitivity of nanogap-rich plasmonic nanostructures in a conjunction with the molecular selection of the hydrogel skin enables the fast and reliable detection of tricyclazole in whole milk with a limit of detection as low as 10 ppb within 1 h. We believe that this plasmonic platform is highly adaptable for in situ and on-site detection of small molecules in various complex mixtures including foods, biological fluids, and environmental fluids.

Surface-enhanced Raman scattering as a discrimination method of Streptococcus spp. and alternative approach for identifying capsular types of S. pneumoniae isolates

The surface-enhanced Raman spectroscopy (SERS) is a method known for its effectiveness in detecting and identifying microorganisms, that was employed to differentiate various bacterial strains both at genus and species level. In this work, we have examined five species belonging to Streptococcus genus, namely S. pneumoniae, S. suis, S. pseudopneumoniae, S. oralis, and S. mitis. Additionally, we conducted SERS experiments on ten S. pneumoniae strains, representing different capsular types. In all of cases we obtained unique SERS signals being spectroscopic fingerprints of bacterial strains tested. Moreover, the principal component analysis (PCA) was performed in order to prove that the spectra of all studied strains can be well separated into five (in case of streptococcal strains) or ten (in case of pneumococcal serotypes) groups. In both investigated situations, the separation at the level of 95% was achieved, proving that SERS-PCA-based method can be used for reliable and fast identification of different strains belonging to the Streptococcus genus, including encapsulated pneumococcal isolates.

Low-cost and high sensitivity glucose sandwich detection using a plasmonic nanodisk metasurface

Glucose detection using surface-enhanced Raman scattering (SERS) spectroscopy has aroused considerable attention due to its potential in the prevention and diagnosis of diabetes as a result of its unique molecular fingerprinting capability, ultrahigh sensitivity and minimal interference from water. Despite numerous solutions to improve the sensitivity of glucose detection, the development of a new SERS-based strategy to detect glucose with high sensitivity and low-cost is still required. In this study, we propose a simple and sensitive SERS-based plasmonic metasurface sensing platform for a glucose sandwich assay using self-assembled p-mercapto-phenylboronic acid (PMBA) monolayers on a gold nanodisk (Au-ND) metasurface and synthesized silver nanoparticles (Ag NPs) modified with a mixture of p-aminothiophenol (PATP) and PMBA. The localized near-field of the proposed plasmonic metasurface is markedly enhanced due to the coupling between the Au-ND and Ag NPs, which greatly improves detection sensitivity. The experimental results show that SERS signals of the glucose assay are significantly enhanced by more than 8-fold, in comparison with the SERS substrate of smooth Au films and Ag NPs. Moreover, the plasmonic metasurface-based glucose sandwich assay exhibits high selectivity and sensitivity for glucose over fructose and galactose. The developed plasmonic metasurface sensing platform shows enormous potential for highly sensitive and selective SERS-based glucose detection and opens a new avenue for scalable and cost-effective biosensing applications in the future.

In situ monitoring of silver adsorption on assembled gold nanorods by surface-enhanced Raman scattering

Self-assembly of metal nanocrystals is able to create a gap of sub-nanometer distance for concentrating incoming light by the strong coupling of surface plasmon resonance, known as a 'hot spot'. Although the plasmonic property of silver is better than other metals in the visible range, the superior Raman enhancement of silver compared to gold is still under debate. To provide direct evidence, in this work, we studied the silver adsorption on assembled gold nanorods (AuNRs) using in situ surface-enhanced Raman scattering (SERS) measurements. The self-assembled AuNR multimers were used as the SERS substrate, where the 4-mercaptophenol (MPh) molecules in our experiment played dual roles as both probe molecules for the Raman scattering and linking molecules for the AuNR assembly in a basic environment. Silver atoms were adsorbed on the surface of gold nanorod assemblies by reduction of Ag⁺ anions. The stability of the adsorbed silver was guaranteed by the basic environment. We monitored the SERS signal during the silver adsorption with a home-built in situ Raman spectroscope, which was synchronized by recording the UV-vis absorption spectra of the reaction solution to instantly quantify the plasmonic effect of the silver adsorption. Although a minor change was found in the plasmonic resonance wavelength or intensity, the measured SERS signal at specific modes faced a sudden increase by 2.1 folds during the silver adsorption. The finite element method (FEM) simulation confirmed that the silver adsorption corresponding to the plasmonic resonance variation gave little change to the electric field enhancement. We attributed the mode-specific enhancement mechanism of the adsorption of silver to the chemical enhancement from charge transfer (CT) for targeting molecules with a specific orientation. Our findings provided new insights to construct SERS substrates with higher enhancement factor (EF), which hopefully would encourage new applications in the field of surface-enhanced optical spectroscopies.

Brain tumour homogenates analysed by surface-enhanced Raman spectroscopy: Discrimination among healthy and cancer cells

One of the biggest challenge for modern medicine is to make a discrimination among healthy and cancerous tissues. Therefore, nowadays big effort of scientist are devoted to find a new way for as fast as possible diagnosis with as much as possible accuracy in distinguishing healthy from cancerous tissues. That issues are probably the most important in the case of brain tumours, when the diagnosis time plays a great role. Herein we present the surface-enhanced Raman spectroscopy (SERS) together with the principal component analysis (PCA) used to identify the spectra of different brain specimens, healthy and tumour tissues homogenates. The presented analyses include three sets of brain tissues as control samples taken from healthy objects (one set consists of samples from four brain lobes and both hemispheres; eight samples) and the brain tumours from five patients (two Anaplastic Astrocytoma and three Glioblastoma samples). Results prove that tumour brain samples can be discriminated well from the healthy tissues by using only three main principal components, with 96% of accuracy. The largest influence onto the calculated separation is attributed to the spectral regions corresponding in SERS spectra to vibrations of the L-Tryptophan (1450, 1278 cm^-1), protein (1300 cm^-1), phenylalanine and Amide-I (1005, 1654 cm^-1). Therefore, the presented method may open the way for the probable application as a very fast diagnosis tool alternative for conventionally used histopathology or even more as an intraoperative diagnostic tool during brain tumour surgery.

Method of optical manipulation of gold nanoparticles for surface-enhanced Raman scattering in a microcavity

In this study, an optical manipulation and micro-surface-enhanced Raman scattering (microSERS) setup based on a microcavity was developed for efficient capture of gold nanoparticles using the photothermal effect. In addition, optical manipulation of gold nanoparticles and SERS signal detection were performed using only one laser. The results show that the SERS enhancement effect based on the microcavity was more than 20 times that based on a gold colloid solution. The laser power and velocity of nanoparticles exhibited a good linear relationship, and the velocity of nanoparticles decreased with decreasing radius r, which verifies the detriment of the radial thermophoresis in this study. This method can be used to quickly and efficiently drive metal nanoparticles and provides a promising approach for analysis of substances in the fields of chemistry and biology.