All-dielectric metamaterials

Interactions of Fundamental Mie Modes with Thin Epsilon-near-Zero Substrates

Extensive research has focused on Mie modes in dielectric nanoresonators, enabling the creation of thin optical devices surpassing their bulk counterparts. This study investigates the interactions between two fundamental Mie modes, electric and magnetic dipoles, and the epsilon-near-zero (ENZ) mode. Analytical, simulation, and experimental analyses reveal that the presence of the ENZ substrate significantly modifies these modes despite a large size mismatch. Electric and magnetic dipole modes, both with ∼12 THz line widths, exhibit 21 and 26 THz anticrossings, respectively, when coupled to the ENZ mode, indicating strong coupling. We also demonstrate that this strongly coupled system yields notably large subpicosecond nonlinear responses. Our results establish a solid foundation for designing functional, nonlinear, dynamic dielectric metasurfaces with ENZ materials.

Tuning dipolar and multipolar resonances of chiral silicon nanostructures for control of near field superchirality

Chiral materials display a property called optical activity, which is the capability to interact differentially with left and right circularly polarised light. This leads to the ability to manipulate the polarisation state of light, which has a broad range of applications spanning from energy efficient displays to quantum technologies. Both synthesised and engineered chiral nanomaterials are exploited in such devices. The design strategy for optimising the optical activity of a chiral material is typically based on maximising a single parameter, the electric dipole-magnetic dipole response. Here we demonstrate an alternative approach of controlling optical activity by manipulating both the dipole and multipolar response of a nanomaterial. This provides an additional parameter for material design, affording greater flexibility. The exemplar systems used to illustrate the strategy are nanofabricated chiral silicon structures. The multipolar response of the structures, and hence their optical activity, can be controlled simply by varying their height. This phenomenon allows optical activity and the creation of so called superchiral fields, with enhanced asymmetries, to be controlled over a broader wavelength range, than is achievable with just the electric dipole-magnetic dipole response. This work adds to the material design toolbox providing a route to novel nanomaterials for optoelectronics and sensing applications.

Designing Metasurfaces for Efficient Solar Energy Conversion

Metasurfaces have recently emerged as a promising technological platform, offering unprecedented control over light by structuring materials at the nanoscale using two-dimensional arrays of subwavelength nanoresonators. These metasurfaces possess exceptional optical properties, enabling a wide variety of applications in imaging, sensing, telecommunication, and energy-related fields. One significant advantage of metasurfaces lies in their ability to manipulate the optical spectrum by precisely engineering the geometry and material composition of the nanoresonators' array. Consequently, they hold tremendous potential for efficient solar light harvesting and conversion. In this Review, we delve into the current state-of-the-art in solar energy conversion devices based on metasurfaces. First, we provide an overview of the fundamental processes involved in solar energy conversion, alongside an introduction to the primary classes of metasurfaces, namely, plasmonic and dielectric metasurfaces. Subsequently, we explore the numerical tools used that guide the design of metasurfaces, focusing particularly on inverse design methods that facilitate an optimized optical response. To showcase the practical applications of metasurfaces, we present selected examples across various domains such as photovoltaics, photoelectrochemistry, photocatalysis, solar-thermal and photothermal routes, and radiative cooling. These examples highlight the ways in which metasurfaces can be leveraged to harness solar energy effectively. By tailoring the optical properties of metasurfaces, significant advancements can be expected in solar energy harvesting technologies, offering new practical solutions to support an emerging sustainable society.

Anisotropic medium sensing controlled by bound states in the continuum in polarization-independent metasurfaces

Bound states in the continuum (BICs) with infinite quality factor (Q-factor) and significant field enhancement pave the way for realizing highly sensitive optical sensors with enhanced light-matter interactions on the nanoscale. However, current optical sensing methods are difficult to discriminate between isotropic and anisotropic media from resonance spectral lines, resulting in optical sensing methods still being limited to isotropic media. In this work, we demonstrate that BICs can be realized by modulating the period of structural units to convert BICs to QBICs without changing their space group symmetry, and propose a polarization-independent metasurfaces-based realization of highly sensitive refractive index sensors for isotropic and anisotropic media as well as discrimination. We propose a metasurface of tetrameric silicon nanoboxes with C4 symmetry as structural units to achieve the conversion of BICs to QBICs by modulating the period of structural units without changing the geometry of the structure. Two QBICs modes dominated by electric toroidal dipole and magnetic toroidal dipole are identified by multipolar decomposition and electromagnetic distribution calculations. Meanwhile, we realize the refractive index detection and resolution of isotropic and anisotropic media based on polarization-independent metasurfaces combined with isotropic and anisotropic media layers. Our work provides what we believe to be a new method for realizing the fast resolution and refractive index optical sensing of isotropic and anisotropic media, and offers new ideas for the design and application of polarization-independent metasurfaces.

Realization of a photoswitchable anapole metasurface based on phase change material Ge2Sb2Te5

The electromagnetic anapole mode originates from the phase cancellation interference between the far-field radiation of an oscillating electric dipole moment and toroidal dipole moment, which presents a radiation-free state of light while enhancing the near-field, and has potential applications in micro- and nanophotonics. The active control of the anapole is crucial for the design and realization of tunable photonic devices. In this paper, we realize dynamic tuning of an anapole metasurface and metasurface optical switching based on the phase change material G e 2 S b 2 T e 5 (GST). By utilizing the destructive interference of the electric dipole moment and ring dipole moment, we design the non-radiative anapole mode. At the same time, we introduce the phase change material GST to dynamically regulate the intensity and position of the far-field scattering, electric field, and transmission spectra, and to realize the transition from anapole mode to electric dipole mode. At the same time, the modulation of the transmission spectrum by the metasurface after the addition of GST film is achieved. A relative transmission modulation of 640.62% is achieved. Our study provides ideas for realizing effective active modulation of active micro- and nanophotonic devices, and promotes active modulation of active micro- and nanophotonic devices in lasers and filters and potential applications in dynamic near-field imaging.

Accelerating Quantum Materials Development with Advances in Transmission Electron Microscopy

Quantum materials are driving a technology revolution in sensing, communication, and computing, while simultaneously testing many core theories of the past century. Materials such as topological insulators, complex oxides, superconductors, quantum dots, color center-hosting semiconductors, and other types of strongly correlated materials can exhibit exotic properties such as edge conductivity, multiferroicity, magnetoresistance, superconductivity, single photon emission, and optical-spin locking. These emergent properties arise and depend strongly on the material's detailed atomic-scale structure, including atomic defects, dopants, and lattice stacking. In this review, we describe how progress in the field of electron microscopy (EM), including in situ and in operando EM, can accelerate advances in quantum materials and quantum excitations. We begin by describing fundamental EM principles and operation modes. We then discuss various EM methods such as (i) EM spectroscopies, including electron energy loss spectroscopy (EELS), cathodoluminescence (CL), and electron energy gain spectroscopy (EEGS); (ii) four-dimensional scanning transmission electron microscopy (4D-STEM); (iii) dynamic and ultrafast EM (UEM); (iv) complementary ultrafast spectroscopies (UED, XFEL); and (v) atomic electron tomography (AET). We describe how these methods could inform structure-function relations in quantum materials down to the picometer scale and femtosecond time resolution, and how they enable precision positioning of atomic defects and high-resolution manipulation of quantum materials. For each method, we also describe existing limitations to solve open quantum mechanical questions, and how they might be addressed to accelerate progress. Among numerous notable results, our review highlights how EM is enabling identification of the 3D structure of quantum defects; measuring reversible and metastable dynamics of quantum excitations; mapping exciton states and single photon emission; measuring nanoscale thermal transport and coupled excitation dynamics; and measuring the internal electric field and charge density distribution of quantum heterointerfaces- all at the quantum materials' intrinsic atomic and near atomic-length scale. We conclude by describing open challenges for the future, including achieving stable sample holders for ultralow temperature (below 10K) atomic-scale spatial resolution, stable spectrometers that enable meV energy resolution, and high-resolution, dynamic mapping of magnetic and spin fields. With atomic manipulation and ultrafast characterization enabled by EM, quantum materials will be poised to integrate into many of the sustainable and energy-efficient technologies needed for the 21st century.

Optically-transparent meta-window for wireless communication

Circumventing the attenuation of microwaves during the propagation is of prime importance to wireless communication towards higher carrier frequencies. Here, we propose a scheme of wireless communications via a functionalized meta-window constructed by an optically-transparent metasurface (OTM) consisting of indium tin oxide (ITO) patterns. When the signal is weak, the OTM can significantly strengthen the signal by focusing the incoming waves towards the windowsill, thus substantially enhancing the network speed. The intensity enhancement of microwaves at 5 GHz via an OTM is verified by both numerical simulations and experiments. Furthermore, the ability to increase the data transfer rate in a 5-GHz-WiFi environment is directly demonstrated. Our work demonstrates the feasibility of applying an optically-transparent meta-window for enhancing wireless communications.

Resonant-Cavity-Enhanced Electrochromic Materials and Devices

With rapid advances in optoelectronics, electrochromic materials and devices have received tremendous attentions from both industry and academia for their strong potentials in wearable and portable electronics, displays/billboards, adaptive camouflage, tunable optics, and intelligent devices, etc. However, conventional electrochromic materials and devices typically present some serious limitations such as undesirable dull colors, and long switching time, hindering their deeper development. Optical resonators have been proven to be the most powerful platform for providing strong optical confinement and controllable lightmatter interactions. They generate locally enhanced electromagnetic near-fields that can convert small refractive index changes in electrochromic materials into high-contrast color variations, enabling multicolor or even panchromatic tuning of electrochromic materials. Here, resonant-cavity-enhanced electrochromic materials and devices, an advanced and emerging trend in electrochromics, are reviewed. In this review, w e will focus on the progress in multicolor electrochromic materials and devices based on different types of optical resonators and their advanced and emerging applications, including multichromatic displays, adaptive visible camouflage, visualized energy storage, and applications of multispectral tunability. Among these topics, principles of optical resonators, related materials/devices and multicolor electrochromic properties are comprehensively discussed and summarized. Finally, the challenges and prospects for resonant-cavity-enhanced electrochromic materials and devices are presented.

Tunable Mie resonance in complex-shaped gadolinium niobate

Nanoscale particles described by Mie resonance in the UV-vis-NIR region are in high demand for optical applications. Controlling the shape and size of these particles is essential, as it results in the ability to control the wavelength of the Mie resonance peak. In this work, we study the extensive scattering properties of gadolinium niobate particles with complex bar- and cube-like shapes in the UV-vis-NIR region. We perform our experimental analysis by characterizing the morphology and extinction spectra, and our theoretical study by implementing a Mie scattering model for a distribution of spherical particles. We can accurately model the size distribution and extinction spectra of complex shaped particles and isolate the contribution of aggregates to the extinction spectra. We can separate the contributions of dipoles, quadrupoles, and octupoles to the Mie resonances for their respective electric and magnetic parts. Our results show that we can tune the broad Mie resonance peak in the extinction spectra by the nanoscale properties of our system. This behavior can aid in the design of lasing and luminescence-enhanced systems. These dielectric gadolinium niobate submicron particles are excellent candidates for light manipulation on the nanoscale.

Resonant Anti-Reflection Metasurfaces for Infrared Transmission Optics

A fundamental capability needed for any transmissive optical component is anti-reflection, yet this capability can be challenging to achieve in a cost-effective manner over longer infrared wavelengths. We demonstrate that Mie-resonant photonic structures can enable high transmission through a high-index optical component, allowing it to function effectively over long-wavelength infrared wavelengths. Using silicon as a model system, we demonstrate a resonant metasurface that enables a window optic with transmission up to 40% greater than that of unpatterned Si. Imaging comparisons with unpatterned Si and off-the-shelf germanium optics are shown as well as modulation transfer function measurements, showing excellent performance and suitability for imaging applications. Our results show how resonant photonic structures can be used to improve optical transmission through high-index optical components and highlight their possible use in infrared imaging applications.

Wavelength multiplexing infrared metasurfaces for protein recognition and trace detection

Infrared metasurfaces have exhibited exceptional optical properties that differ from naturally occurring metallic and dielectric nanostructure, enabling non-destructive and label-free sensing in a broadband region. However, implementing wavelength multiplexing sensors in broadband infrared has faced significant challenges. These challenges arise from the difficulty in efficiently exciting high Q resonances at specific wavelengths and the inability to individually tune each resonance. Herein, we present a dual resonant metasurface that utilizes a metal-dielectric-metal plasmonic grating and a dielectric-metal channel. By adjusting the vertical and horizontal structures of metasurface, we can independently modify the spectrum of the metasurface in the near-infrared and mid-infrared regions. This broadband infrared metasurface exhibits robust spectral regulation, enabling a polarization-dependent strategy for the dual-resonance. It offers a competitive advantage over traditional metallic nanostructure in refractive index sensing at the second near-infrared window and ultrasensitive vibrational spectroscopy in mid-infrared. Specifically, our proposed metasurface achieves protein concentration sensing and dynamic monitoring of protein concentration in the infrared two-zone. Additionally, it enhances the mid-infrared absorption of amide II with a high Q resonance. The metasurface which combines wavelength multiplexing and polarization dependent switch for protein recognition and trace detection, presents a novel approach for developing high-performance sensors and Integrated photonics sensors in the broadband infrared region.

Anomalous polarization-sensitive Fabry-Perot resonance in a one-dimensional photonic crystal containing an all-dielectric metamaterial defect

Owing to polarization-independent property of propagating phases inside isotropic dielectric layers, Fabry-Perot resonances in metal-dielectric-metal sandwich structures and one-dimensional (1-D) photonic crystals (PhCs) with isotropic dielectric defects are polarization-insensitive. Herein, we introduce an all-dielectric elliptical metamaterial (EMM) defect into a 1-D PhC to realize an anomalous polarization-sensitive Fabry-Perot resonance empowered by the polarization-sensitive property of the propagating phase inside the all-dielectric EMM layer. The wavelength difference of the Fabry-Perot resonance between transverse magnetic and transverse electric polarizations is larger than 100 nm at the incident angle of 45 degrees. Enabled by the polarization-sensitive property of the Fabry-Perot resonance, high-performance polarization selectivity can be achieved in a broad angle range. Our work offers a viable recipe, well within the reach of current fabrication technique, to explore polarization-dependent physical phenomena and devices.

High-Q Quasi-Bound States in the Continuum in Terahertz All-Silicon Metasurfaces

Bound states in the continuum (BIC)-based all-silicon metasurfaces have attracted widespread attention in recent years because of their high quality (Q) factors in terahertz (THz) frequencies. Here, we propose and experimentally demonstrate an all-silicon BIC metasurface consisting of an air-hole array on a Si substrate. BICs originated from low-order TE and TM guided mode resonances (GMRs) induced by (1,0) and (1,1) Rayleigh diffraction of metagratings, which were numerically investigated. The results indicate that the GMRs and their Q-factors are easily excited and manipulated by breaking the lattice symmetry through changes in the position or radius of the air-holes, while the resonance frequencies are less sensitive to these changes. The measured Q-factor of the GMRs is as high as 490. The high-Q metasurfaces have potential applications in THz modulators, biosensors, and other photonic devices.

van der Waals Materials for Overcoming Fundamental Limitations in Photonic Integrated Circuitry

With the advance of on-chip nanophotonics, there is a high demand for high-refractive-index and low-loss materials. Currently, this technology is dominated by silicon, but van der Waals (vdW) materials with a high refractive index can offer a very advanced alternative. Still, up to now, it was not clear if the optical anisotropy perpendicular to the layers might be a hindering factor for the development of vdW nanophotonics. Here, we studied WS2-based waveguides in terms of their optical properties and, particularly, in terms of possible crosstalk distance. Surprisingly, we discovered that the low refractive index in the direction perpendicular to the atomic layers improves the characteristics of such devices, mainly due to expanding the range of parameters at which single-mode propagation can be achieved. Thus, using anisotropic materials offers new opportunities and novel control knobs when designing nanophotonic devices.

Ultra-large near-infrared omnidirectional photonic bandgaps in cascaded one-dimensional photonic crystals containing all-dielectric metamaterials

In conventional one-dimensional (1-D) photonic crystals (PCs) consisting of isotropic dielectrics, photonic bandgaps (PBGs) substantially shift toward shorter wavelengths as incident angle increases. This strong blueshift characteristic of PBGs significantly reduces the widths of near-infrared omnidirectional photonic bandgaps (OPBGs). Recently, researchers achieved a kind of special PBG called angle-insensitive PBGs in 1-D PCs containing all-dielectric elliptical metamaterials (EMMs). The emergence of angle-insensitive PBGs provides us a possibility to achieve ultra-large near-infrared OPBGs. Herein, we design two 1-D PCs containing all-dielectric EMMs with near-infrared angle-insensitive PBGs in different wavelength ranges. By cascading two 1-D PCs containing all-dielectric EMMs together, we achieve an ultra-large near-infrared OPBG with a width up to 1.004 µm (relative bandwidth of 63.9%). In addition, the width of the near-infrared OPBG demonstrates robustness against the layer thickness. Our work not only provides a feasible route to achieving ultra-large near-infrared OPBGs, but also facilitates the design of broadband omnidirectional mirrors.

Research Progress in Surface-Enhanced Infrared Absorption Spectroscopy: From Performance Optimization, Sensing Applications, to System Integration

Infrared absorption spectroscopy is an effective tool for the detection and identification of molecules. However, its application is limited by the low infrared absorption cross-section of the molecule, resulting in low sensitivity and a poor signal-to-noise ratio. Surface-Enhanced Infrared Absorption (SEIRA) spectroscopy is a breakthrough technique that exploits the field-enhancing properties of periodic nanostructures to amplify the vibrational signals of trace molecules. The fascinating properties of SEIRA technology have aroused great interest, driving diverse sensing applications. In this review, we first discuss three ways for SEIRA performance optimization, including material selection, sensitivity enhancement, and bandwidth improvement. Subsequently, we discuss the potential applications of SEIRA technology in fields such as biomedicine and environmental monitoring. In recent years, we have ushered in a new era characterized by the Internet of Things, sensor networks, and wearable devices. These new demands spurred the pursuit of miniaturized and consolidated infrared spectroscopy systems and chips. In addition, the rise of machine learning has injected new vitality into SEIRA, bringing smart device design and data analysis to the foreground. The final section of this review explores the anticipated trajectory that SEIRA technology might take, highlighting future trends and possibilities.

Greatly Enhanced Resonant Exciton-Trion Conversion in Electrically Modulated Atomically Thin WS2 at Room Temperature

Excitonic resonance in atomically thin semiconductors offers a favorite platform to study 2D nanophotonics in both classical and quantum regimes and promises potentials for highly tunable and ultra-compact optical devices. The understanding of charge density dependent exciton-trion conversion is the key for revealing the underlaying physics of optical tunability. Nevertheless, the insufficient and inefficient light-matter interactions hinder the observation of trionic phenomenon and the development of excitonic devices for dynamic power-efficient electro-optical applications. Here, by engaging an optical cavity with atomically thin transition metal dichalcogenides (TMDCs), greatly enhanced exciton-trion conversion is demonstrated at room temperature (RT) and achieve electrical modulation of reflectivity of ≈40% at exciton and 7% at trion state, which correspondingly enables a broadband large phase tuning in monolayer tungsten disulfide. Besides the absorptive conversion, ≈100% photoluminescence conversion from excitons to trions is observed at RT, illustrating a clear physical mechanism of an efficient exciton-trion conversion for extraordinary optical performance. The results indicate that both excitons and trions can play significant roles in electrical modulation of the optical parameters of TMDCs at RT. The work shows the real possibility for realizing electrical tunable and multi-functional ultra-thin optical devices using 2D materials.

Ultraviolet metasurface-assisted photoacoustic microscopy with great enhancement in DOF for fast histology imaging

Pathology interpretations of tissue rely on the gold standard of histology imaging, potentially hampering timely access to critical information for diagnosis and management of neoplasms because of tedious sample preparations. Slide-free capture of cell nuclei in unprocessed specimens without staining is preferable; however, inevitable irregular surfaces in fresh tissues results in limitations. An ultraviolet metasurface with the ability to generate an ultraviolet optical focus maintaining < 1.1-µm in lateral resolution and ∼290 µm in depth of field (DOF) is proposed for fast, high resolution, label-free photoacoustic histological imaging of unprocessed tissues with uneven surfaces. Microanatomical characteristics of the cell nuclei can be observed, as demonstrated by the mouse brain samples that were cut by hand and a ∼3 × 3-mm2 field of view was imaged in ∼27 min. Therefore, ultraviolet metasurface-assisted photoacoustic microscopy is anticipated to benefit intraoperative pathological assessments and basic scientific research by alleviating laborious tissue preparations.

In-plane emission manipulation of random optical modes by using a zero-index material

In this work, we have proposed to implement a zero-index material (ZIM) to control the in-plane emission of planar random optical modes while maintaining the intrinsic disordered features. Light propagating through a medium with near-zero effective refractive index accumulates little phase change and is guided to the direction determined by the conservation law of momentum. By enclosing a disordered structure with a ZIM based on all-dielectric photonic crystal (PhC), broadband emission directionality improvement can be obtained. We find the maximum output directionality enhancement factor reaches 30, around 6-fold increase compared to that of the random mode without ZIM. The minimum divergence angle is ∼6° for single random optical mode and can be further reduced to ∼3.5° for incoherent multimode superposition in the far field. Despite the significant directionality enhancement, the random properties are well preserved, and the Q factors are even slightly improved. The method is robust and can be effectively applied to the disordered medium with different structural parameters, e.g., the filling fraction of scatterers, and different disordered structure designs with extended or strongly localized modes. The output direction of random optical modes can also be altered by further tailoring the boundary of ZIM. This work provides a novel and universal method to manipulate the in-plane emission direction as well as the directionality of disordered medium like random lasers, which might enable its on-chip integration with other functional devices.

Bright-Field and Edge-Enhanced Imaging Using an Electrically Tunable Dual-Mode Metalens

The imaging of microscopic biological samples faces numerous difficulties due to their small feature sizes and low-amplitude contrast. Metalenses have shown great promise in bioimaging as they have access to the complete complex information, which, alongside their extremely small and compact footprint and potential to integrate multiple functionalities into a single device, allow for miniaturized microscopy with exceptional features. Here, we design and experimentally realize a dual-mode metalens integrated with a liquid crystal cell that can be electrically switched between bright-field and edge-enhanced imaging on the millisecond scale. We combine the concepts of geometric and propagation phase to design the dual-mode metalens and physically encode the required phase profiles using hydrogenated amorphous silicon for operation at visible wavelengths. The two distinct metalens phase profiles include (1) a conventional hyperbolic metalens for bright-field imaging and (2) a spiral metalens with a topological charge of +1 for edge-enhanced imaging. We demonstrate the focusing and vortex generation ability of the metalens under different states of circular polarization and prove its use for biological imaging. This work proves a method for in vivo observation and monitoring of the cell response and drug screening within a compact form factor.

Singular optics empowered by engineered optical materials

The rapid development of optical technologies, such as optical manipulation, data processing, sensing, microscopy, and communications, necessitates new degrees of freedom to sculpt optical beams in space and time beyond conventionally used spatially homogenous amplitude, phase, and polarization. Structuring light in space and time has been indeed shown to open new opportunities for both applied and fundamental science of light. Rapid progress in nanophotonics has opened up new ways of "engineering" ultra-compact, versatile optical nanostructures, such as optical two-dimensional metasurfaces or three-dimensional metamaterials that facilitate new ways of optical beam shaping and manipulation. Here, we review recent progress in the field of structured light-matter interactions with a focus on all-dielectric nanostructures. First, we introduce the concept of singular optics and then discuss several other families of spatially and temporally structured light beams. Next, we summarize recent progress in the design and optimization of photonic platforms, and then we outline some new phenomena enabled by the synergy of structured light and structured materials. Finally, we outline promising directions for applications of structured light beams and their interactions with engineered nanostructures.

Angular-Dependent THz Modulator with Hybrid Metal-Graphene Metastructures

The coupling effects of surface plasmon resonance (SPR) from metamaterials induce variation in both the frequency and intensity of plasmonic modes. Here, we report an angular-dependent THz modulator with hybrid metal-graphene metastructures. The metastructures composed of the period gold split-rod arrays on top of a monolayer graphene, which show redshift modulation in the THz region with an increasing incident angle due to the strong out-of-plane magnetic flux introduced by the clockwise circular current at the oblique incidence. By utilizing graphene-based actively tunable conductor with ion-gel electrical gating, the THz transmission can be significantly modified. The modulation depth of the hybrid metal-graphene metastructure modulator can reach ~37.6% at 0.62 THz with a gate voltage of -3 V. The theoretical modeling of transmitted dependency on frequency and incident angle is demonstrated at different Fermi energies, which fits well with the experimental results. This hybrid device can offer a useful method for THz applications (such as angle sensors or angular-resolved spectroscopy), where angle-dependent modulation is needed.

Recent advanced applications of metasurfaces in multi-dimensions

Unlike traditional optical components, which rely on the gradual accumulation of light along the optical path over a distance much larger than the wavelength to form a wavefront, metasurfaces manipulate light field properties on the wavelength thickness by specially arranging various meta-atoms. Due to the ease of integration and compact planar structure, metasurfaces play a key role in the light field manipulations. Here, we review the recent advances of metasurfaces in multi-dimensions, including light wavelength, polarization, orbital angular momentum(OAM), and angular response. Progress in these fields has brought new applications in areas such as imaging, display, communication, and information encryption, etc. Finally, we also discuss the challenges and prospects of metasurfaces applications.

All-dielectric carpet cloaks with three-dimensional anisotropy control

In this article, we propose all-dielectric carpet cloaks composed of jungle gym shaped dielectric unit cells and present a design strategy for three-dimensional (3-D) anisotropy control based on the transformation optics. The carpet cloaks are 3-D printable and operate with polarization independent incident waves in arbitrary incident angles due to the 3-D anisotropy control. Realizable anisotropic permittivities of cubic and rectangular unit cells are numerically studied based on the relative permittivity and loss tangent of ɛ r = 2.9 and tan δ = 0.02 of ultra-violet curing resin measured at the microwave frequency. It is shown that the unit cell has little frequency dependence even with the anisotropy in the low frequency range where the effective medium approximation is valid. A carpet cloak is designed based on the design method with a quasi-conformal coordinate transformation and implemented with the unit cells taking into account its realizable anisotropy. Polarization independent 3-D cloaking operations of the designed cloak are confirmed numerically. The designed cloak is fabricated by stereolithography 3-D printing technology and its cloaking performances are evaluated experimentally at 10 GHz. It is shown that non-specular reflections are well suppressed by the carpet cloak for both TE and TM incident waves with different incident angles of 30, 45, and 60°. Frequency independent cloaking operations are also shown experimentally in the X-band. The measured near-field distributions and bistatic radar cross sections are in good agreement with simulated predictions and the validity of the design method is confirmed.

Chiral-magic angle of nanoimprint meta-device

The magic angle of Twistronics has attracted a lot of attention because of its peculiar electrical characteristics. Moiré patterns formed by the superlattice of a twisted bilayer change overall physical properties. Circular dichroism can also be manipulated through the generated moiré pattern. Here, we report a polymer-based twisted bilayer meta-device fabricated by multilayer nanoimprint technology and study the magic angle of chirality. The superlattice of the bilayer meta-device creates moiré patterns and brings unique chiral optical responses. The bilayer nanoimprint technology is developed for metasurfaces with relative twist angles. Via the twist angle control, polymer materials with a low refractive index can manipulate the electric field of the light and reveal the chiral magic angle. Moreover, the shape of the meta-atoms plays a key role in chiral magic angle tuning. The chirality engineering by the reported nanoimprint technology and chiral meta-devices may contribute to applications in chiral imaging, biomedical sensing, lasing, and tunable optical devices.

Angle-insensitive topological interface states in hybrid one-dimensional photonic crystal heterostructures containing all-dielectric metamaterials

Topological interface states (TISs) in conventional one-dimensional (1D) photonic crystal (PhC) heterostructures strongly shift toward higher frequencies as the incident angle increases. This strong blueshift property of TISs intensively limits the operating angle ranges of TISs. Herein, we design two angle-insensitive photonic bandgaps (PBGs) in two hybrid 1D PhCs containing all-dielectric metamaterials. By cascading these two hybrid 1D PhCs to construct a hybrid 1D PhC heterostructure, we achieve an angle-insensitive TIS under transverse magnetic polarization. Empowered by the angle-insensitive property of the PBGs, the angular tolerance of the TIS reaches 69.65°, which is much higher than those of the TISs in conventional 1D PhC heterostructures. In addition, the angle-insensitive property of the TIS is robust against the layer thickness. Our work provides a viable route to achieving TISs with high angular tolerances and would facilitate the applications of photonic topological states.

Generalized Brewster angle-enhanced photonic spin Hall effect in an all-dielectric metasurface

The enhancement of the photonic spin Hall effect (PSHE) is usually limited at horizontally polarized incidence and around the nonadjustable Brewster angle. In this Letter, a flexible method for enhancing the reflective PSHE with tunable incident angle under both vertically (V) and horizontally (H) polarized light has been theoretically explored. By using the multipole decomposition method, the variable generalized Brewster angle (GBA) is proven to be obtained under both V- and H-polarized light at different wavelengths in the all-dielectric metasurface. Then, owing to the large ratio of Fresnel coefficients at the GBA, the enhancement of PSHE in this Letter can not only be available for both V- and H-polarization, but also achieved at widely tunable incident angle and different operating wavelengths in the same metasurface. This work provides a simple method to achieve the flexible enhancement of PSHE and offers a novel way for designing a functional spin-based photonic device.

Multilayer all-polymer metasurface stacked on optical fiber via sequential micro-punching process

Metasurface technology is revolutionizing the field of optics and pursuing expanded functions via technical developments, such as the integration of multiple metasurfaces with optical fibers. Despite several attempts to realize metasurface-on-fiber platforms, negligible fiber-facet areas pose a serious obstacle to efficient and precise fabrication. Herein, we demonstrate a novel sequential micro-punching process that enables rapid and precise stacking of multiple polymer metasurfaces on the end face of a single-mode optical fiber. Mesh-type nanohole metasurfaces are fabricated on a 1.8-μm-thick polymethyl methacrylate (PMMA) layer via e-beam lithography, and the PMMA layer is separated from the substrate and prepared in the form of a membrane using the external frame. Furthermore, the PMMA metasurfaces are sequentially punched through the fiber and stacked on top. Employing a micro-punching process, we demonstrate highly efficient all-polymer metalenses and orbital angular momentum (OAM) metasurfaces coupled with single-mode fibers operating in the telecommunication band. A 1550 nm laser beam passing through three metalens layers stacked on the fiber is focused at a distance of 135 μm with 83% efficiency. In addition, the 1550 nm beam passing through three OAM metasurfaces on the fiber is converted into a perfect vortex beam with a topological charge of 3. We believe that our proposed micro-punching process will cause a breakthrough in the fabrication of metasurface-integrated optical fibers that will be utilized in a wide range of applications.

Smartphone-Based Attomolar Cyanide Ion Sensing Using Au-Graphene Oxide Cryosoret Nanoassembly and Benzoxazolium-Based Fluorophore in a Surface Plasmon-Coupled Enhanced Fluorescence Interface

Photoplasmonic platforms are being demonstrated as excellent means for bridging nanochemistry and biosensing approaches at advanced interfaces, thereby augmenting the sensitivity and quantification of the desired analytes. Although resonantly coupled electromagnetic waves at the surface plasmon-coupled emission (SPCE) interface are investigated with myriad nanomaterials in order to boost the detection limits, rhodamine moieties are ubiquitously used as SPCE reporter molecules in spite of their well-known limitations. In order to overcome this constraint, in this work, a benzoxazolium-based fluorescent molecule, (E)-2-(4-(dimethylamino)styryl)-3-methylbenzo[d]oxazol-3-ium iodide (DSBO), was synthesized to selectively detect the cyanide (CN^-) ions in water samples. To this end, the sensitivity of the fabricated SPCE substrates is tested in spacer, cavity, and extended cavity nanointerfaces to rationalize the configurational robustness. The performance of the sensor is further improved with the careful engineering of gold (Au)-graphene oxide (GO) cryosoret nanoassemblies fabricated via an adiabatic cooling technology. The unique dequenching (turn-on) of the quenched (turn-off) fluorescent signal is demonstrated with the hybridized metal-π plasmon synergistic coupling in the nanovoids and nanocavities assisting delocalized Bragg and localized Mie plasmons. The spectro-plasmonic analysis yielded highly directional, polarized (>95%), and enhanced emission attributes with an attomolar limit of detection of 10 aM of CN^- ions with high linearity (R² = 0.996) and excellent reliability, in addition to an exceptional correlation with the theoretically obtained TFclac simulations. The CN^- ion sensing is experimentally validated with the smartphone-based cost-effective SPCE detection technology to render the device amenable to resource-limited settings. We believe that the unique fluorophore-cryosoret nanoassemblage presented here encourages development of frugal, unconventional, and highly desirable strategies for the selective quantitation of environmentally and physiologically relevant analytes at trace concentrations for use in point-of-care diagnostics.

Fast decomposed method to devise broadband polarization-conversion metasurface

Designing a broadband, wide-angle, and high-efficient polarization converter with a simple geometry remains challenging. This work proposes a simple and computationally inexpensive method for devising broadband polarization conversion metasurfaces. We focus on a cross-shape configuration consisting of two bars of different lengths connected at the center. To design the metasurface, we decompose the system into two parts with two orthogonally polarized responses and calculate the response of each part separately. By selecting the parameters with a proper phase difference in the response between the two parts, we can determine the dimensions of the system. For designing broadband polarization conversion metasurfaces, we define a fitness function to optimize the bandwidth of the linear polarization conversion. Numerical results demonstrate that the proposed method can be used to design a metasurface that achieves a relative bandwidth of [Formula: see text] for converting linearly polarized waves into cross-polarized waves. Additionally, the average polarization conversion ratio of the designed metasurface is greater than [Formula: see text] over the frequency range of 10.9-28.5 GHz. This method significantly reduces the computational expense compared to the traditional method and can be easily extended to other complex structures and configurations.

Recent Advances in Tunable Metasurfaces and Their Application in Optics

Metasurfaces can be opportunely and specifically designed to manipulate electromagnetic wavefronts. In recent years, a large variety of metasurface-based optical devices such as planar lenses, beam deflectors, polarization converters, and so on have been designed and fabricated. Of particular interest are tunable metasurfaces, which allow the modulation of the optical response of a metasurface; for instance, the variation in the focal length of a converging metalens. Response tunability can be achieved through external sources that modify the permittivity of the materials constituting the nanoatoms, the substrate, or both. The modulation sources can be classified into electromagnetic fields, thermal sources, mechanical stressors, and electrical bias. Beside this, we will consider optical modulation and multiple approach tuning strategies. A great variety of tunable materials have been used in metasurface engineering, such as transparent conductive oxides, ferroelectrics, phase change materials, liquid crystals, and semiconductors. The possibility of tuning the optical properties of these metamaterials is very important for several applications spanning from basic optics to applied optics for communications, depth sensing, holographic displays, and biochemical sensors. In this review, we summarize the recent progress on electro-optical magnetic, mechanical, and thermal tuning of metasurfaces actually fabricated and experimentally tested in recent years. At the end of the review, a short section on possible future perspectives and applications is included.

In-plane hyperbolic polariton tuners in terahertz and long-wave infrared regimes

One of the main bottlenecks in the development of terahertz (THz) and long-wave infrared (LWIR) technologies is the limited intrinsic response of traditional materials. Hyperbolic phonon polaritons (HPhPs) of van der Waals semiconductors couple strongly with THz and LWIR radiation. However, the mismatch of photon - polariton momentum makes far-field excitation of HPhPs challenging. Here, we propose an In-Plane Hyperbolic Polariton Tuner that is based on patterning van der Waals semiconductors, here α-MoO3, into ribbon arrays. We demonstrate that such tuners respond directly to far-field excitation and give rise to LWIR and THz resonances with high quality factors up to 300, which are strongly dependent on in-plane hyperbolic polariton of the patterned α-MoO3. We further show that with this tuner, intensity regulation of reflected and transmitted electromagnetic waves, as well as their wavelength and polarization selection can be achieved. Our results can help the development of THz and LWIR miniaturized devices.

X-ray-to-visible light-field detection through pixelated colour conversion

Light-field detection measures both the intensity of light rays and their precise direction in free space. However, current light-field detection techniques either require complex microlens arrays or are limited to the ultraviolet-visible light wavelength ranges^1-4. Here we present a robust, scalable method based on lithographically patterned perovskite nanocrystal arrays that can be used to determine radiation vectors from X-rays to visible light (0.002-550 nm). With these multicolour nanocrystal arrays, light rays from specific directions can be converted into pixelated colour outputs with an angular resolution of 0.0018°. We find that three-dimensional light-field detection and spatial positioning of light sources are possible by modifying nanocrystal arrays with specific orientations. We also demonstrate three-dimensional object imaging and visible light and X-ray phase-contrast imaging by combining pixelated nanocrystal arrays with a colour charge-coupled device. The ability to detect light direction beyond optical wavelengths through colour-contrast encoding could enable new applications, for example, in three-dimensional phase-contrast imaging, robotics, virtual reality, tomographic biological imaging and satellite autonomous navigation.

Quasi-bound states in the continuum with a stable resonance wavelength in dimer dielectric metasurfaces

Symmetry-protected bound states in the continuum (SP-BICs) are one of the most intensively studied BICs. Typically, SP-BICs must be converted into quasi-BICs (QBICs) by breaking the unit cell's symmetry so that they can be accessed by the external excitation. The symmetry-broken usually results in a varied resonance wavelength of QBICs which are also highly sensitive to the asymmetry parameters. In this work, we demonstrate that QBICs with a stable resonance wavelength can be realized by breaking translational symmetry in an all-dielectric metasurface. The unit cell of metasurface is made of a silicon nanodisk dimer. The Q-factor of QBICs is precisely tuned by changing the interspacing of two nanodisks while their resonance wavelength is quite stable against the interspacing. We also find that such BICs show weak dependence on the shape of the nanodisk. Multiple decompositions indicate that the toroidal dipole dominates this type of QBIC. The resonance wavelengths of QBICs can be tuned only by changing either the lattice constants or the radius of nanodisk. Finally, we present experimental demonstrations on such a QBIC with a stable resonance wavelength. The highest measured Q-factor of QBICs is >3000. Our results may find promising applications in enhancing light-matter interaction.

Tailoring the resonant modes in liquid crystal based all-dielectric metasurfaces

High refractive index dielectic metasurfaces are being increasingly studied for their novel light-matter interactions such as Huygen's lens, absolute transmission and complete absorption. Liquid crystal is a versatile medium with high dielectric anisotropy and hence interaction of light with the dielectric metasurfaces immersed in liquid crystal medium show complex behaviour compared to isotropic media. Most of the investigations on liquid crystal based electromagnetic response of dielectric metasurfaces focus on tunability of resonant frequencies and switching between the resonant states as a function of external stimuli such as electric field, temperature, etc. In the current work we present a detailed numerical investigation based on studies of scattering response, near-field and far-field radiation profiles of cubic Tellurium metasurfaces as a function of liquid crystal orientations in infrared frequencies. We show that the near-field and far-field radiation profiles of primary resonant modes-electric dipoles and magnetic dipoles reorient as a function of liquid crystal orientations. In particular, we study the effect of liquid crystal orientations on novel non-radiative states called anapoles. It is observed that liquid crystal orientations effect the excitation and orientation of anapole states within the Tellurium structures. This paves way for design of an electrically-driven switch between non-radiative and radiative states. Further, controlling the near-field and far-field radiation profiles opens up possibilities in designing liquid crystal based tunable multi-functional metasurfaces which can change the directionality of incident light.

Grayscale-patterned integrated multilayer-metal-dielectric microcavities for on-chip multi/hyperspectral imaging in the extended visible bandwidth

Pixelated filter arrays of Fabry-Perot (FP) cavities are widely integrated with photodetectors to achieve a WYSIWYG ("what you see is what you get") on-chip spectral measurements. However, FP-filter-based spectral sensors typically have a trade-off between their spectral resolution and working bandwidth due to design limitations of conventional metal or dielectric multilayer microcavities. Here, we propose a new idea of integrated color filter arrays (CFAs) consisting of multilayer metal-dielectric-mirror FP microcavities that, enable a hyperspectral resolution over an extended visible bandwidth (∼300 nm). By introducing another two dielectric layers on the metallic film, the broadband reflectance of the FP-cavity mirror was greatly enhanced, accompanied by as-flat-as-possible reflection-phase dispersion. This resulted in balanced spectral resolution (∼10 nm) and spectral bandwidth from 450 nm to 750 nm. In the experiment, we used a one-step rapid manufacturing process by using grayscale e-beam lithography. A 16-channel (4 × 4) CFA was fabricated and demonstrated on-chip spectral imaging with a CMOS sensor and an impressive identification capability. Our results provide an attractive method for developing high-performance spectral sensors and have potential commercial applications by extending the utility of low-cost manufacturing process.

Giant and Tunable Excitonic Optical Anisotropy in Single-Crystal Halide Perovskites

During the last years, giant optical anisotropy has demonstrated its paramount importance for light manipulation. In spite of recent advances in the field, the achievement of continuous tunability of optical anisotropy remains an outstanding challenge. Here, we present a solution to the problem through the chemical alteration of halogen atoms in single-crystal halide perovskites. As a result, we manage to continually modify the optical anisotropy by 0.14. We also discover that the halide perovskite can demonstrate optical anisotropy up to 0.6 in the visible range─the largest value among non-van der Waals materials. Moreover, our results reveal that this anisotropy could be in-plane and out-of-plane depending on perovskite shape─rectangular and square. As a practical demonstration, we have created perovskite anisotropic nanowaveguides and shown a significant impact of anisotropy on high-order guiding modes. These findings pave the way for halide perovskites as a next-generation platform for tunable anisotropic photonics.

Increasing steering angle of LCoS in a WSS system through integration with a metasurface

Liquid crystal on silicon (LCoS) has been the dominant choice for wavelength selective switches (WSSs) in telecommunication industry due to its high spatial resolution and compatibility with software defined flexible grid feature. Current LCoS devices generally have a limited steering angle, which also limits the minimum footprint of the WSS system. The steering angle of LCoS devices is fundamentally determined by the pixel pitch, which is highly challenging to be optimized without resorting to other techniques. In this paper, we present an approach to increase the steering angle of LCoS devices through the integration with dielectric metasurfaces. Here a dielectric Huygens-type metasurface is integrated with an LCoS device to increase its steering angle by 10°. This approach can effectively minimize the overall size of the WSS system while maintaining a small form factor of the LCoS device.

Nanoimprinted 2D-Chiral Perovskite Nanocrystal Metasurfaces for Circularly Polarized Photoluminescence

The versatile hybrid perovskite nanocrystals (NCs) are one of the most promising materials for optoelectronics by virtue of their tunable bandgaps and high photoluminescence (PL) quantum yields. However, their inherent crystalline chemical structure limits the chiroptical properties achievable with the material. The production of chiral perovskites has become an active field of research for its promising applications in optics, chemistry, or biology. Typically, chiral halide perovskites are obtained by the incorporation of different chiral moieties in the material. Unfortunately, these chemically modified perovskites have demonstrated moderate values of chiral PL so far. Here, a general and scalable approach is introduced to produce chiral PL from arbitrary nanoemitters assembled into 2D-chiral metasurfaces. The fabrication via nanoimprinting lithography employs elastomeric molds engraved with chiral motifs covering millimeter areas that are used to pattern two types of unmodified colloidal perovskite NC inks: green-emissive CsPbBr₃ and red-emissive CsPbBr₁ I₂ . The perovskite 2D-metasurfaces exhibit remarkable PL dissymmetry factors (g_lum ) of 0.16 that can be further improved up to g_lum of 0.3 by adding a high-refractive-index coating on the metasurfaces. This scalable approach to produce chiral photoluminescent thin films paves the way for the seamless production of bright chiral light sources for upcoming optoelectronic applications.

Sol-gel synthesis, structure, and dielectric properties of La0.67LixTi1-xAlxO3 solid solutions

La_0.67Li_xTi_1-xAl_xO₃ were synthesized using the sol-gel Pechini route. Ceramic samples were sintered in the temperature range of 1240-1300 °C in the air atmosphere. It was found that in the concentration range of 0.05 ≤ x < 0.15 there is a morphotropic phase boundary region with rhombohedral and tetragonal syngonies. In the concentration range of 0.15 ≤ x ≤ 0.3, a single-phase solid solution with rhombohedral R 3 ‾ c syngony is formed. As the value of x increases, the average grain size of La_0.67Li_xTi_1-xAl_xO₃ ceramics increases from 5.23 μm (x = 0.05) to 8.76 μm (x = 0.3). All materials of the La_0.67Li_xTi_1-xAl_xO₃ system at 0.05 ≤ x ≤ 0.3 have colossal values of dielectric constant ε' > 10⁴ at frequencies up to 1 kHz. La_0.67Li_xTi_1-xAl_xO₃ (x = 0.2) solid solution with rhombohedral syngony has the highest value of dielectric constant and the lowest value of the dielectric losses.

Optical perfectly matched layers based on the integration of photonic crystals and material loss

Perfectly matched layer (PML) is a virtual absorption boundary condition adopted in numerical simulations, capable of absorbing light from all incident angles, which however is still lacking in practice in the optical regime. In this work, by integrating dielectric photonic crystals and material loss, we demonstrate an optical PML design with near-omnidirectional impedance matching and customized bandwidth. The absorption efficiency exceeds 90% for incident angle up to 80°. Good consistence is found between our simulations and proof-of-principle microwave experiments. Our proposal paves the road to realize optical PMLs, and could find applications in future photonic chips.

Topological Insulator Metamaterials

Confinement of electromagnetic fields at the subwavelength scale via metamaterial paradigms is an established method to engineer light-matter interaction in most common material systems, from insulators to semiconductors and from metals to superconductors. In recent years, this approach has been extended to the realm of topological materials, providing a new avenue to access nontrivial features of their electronic band structure. In this review, we survey various topological material classes from a photonics standpoint, including crystal growth and lithographic structuring methods. We discuss how exotic electronic features such as spin-selective Dirac plasmon polaritons in topological insulators or hyperbolic plasmon polaritons in Weyl semimetals may give rise to unconventional magneto-optic, nonlinear, and circular photogalvanic effects in metamaterials across the visible to infrared spectrum. Finally, we dwell on how these effects may be dynamically controlled by applying external perturbations in the form of electric and magnetic fields or ultrafast optical pulses. Through these examples and future perspectives, we argue that topological insulator, semimetal and superconductor metamaterials are unique systems to bridge the missing links between nanophotonic, electronic, and spintronic technologies.

Photonic Crystal Enhanced Fluorescence: A Review on Design Strategies and Applications

Nanoscale fluorescence emitters are efficient for measuring biomolecular interactions, but their utility for applications requiring single-unit observations is constrained by the need for large numerical aperture objectives, fluorescence intermittency, and poor photon collection efficiency resulting from omnidirectional emission. Photonic crystal (PC) structures hold promise to address the aforementioned challenges in fluorescence enhancement. In this review, we provide a broad overview of PCs by explaining their structures, design strategies, fabrication techniques, and sensing principles. Furthermore, we discuss recent applications of PC-enhanced fluorescence-based biosensors incorporated with emerging technologies, including nucleic acids sensing, protein detection, and steroid monitoring. Finally, we discuss current challenges associated with PC-enhanced fluorescence and provide an outlook for fluorescence enhancement with photonic-plasmonics coupling and their promise for point-of-care biosensing as well monitoring analytes of biological and environmental relevance. The review presents the transdisciplinary applications of PCs in the broad arena of fluorescence spectroscopy with broad applications in photo-plasmonics, life science research, materials chemistry, cancer diagnostics, and internet of things.

A Single-Step Bottom-up Approach for Synthesis of Highly Uniform Mie-Resonant Crystalline Semiconductor Particles at Visible Wavelengths

Optically Mie-resonant crystalline silicon nanoparticles have long attracted interest for their unique scattering behaviors. Here, we report a bottom-up nonthermal plasma process that produces highly monodisperse particles, with diameters controllable between 60 and 214 nm, by temporarily electrostatically trapping nanoparticles inside a continuous-flow plasma reactor. The particle size is tuned by adjusting the gas residence time in the reactor. By dispersing the nanoparticles in water, optical extinction measurements indicate colloidal solutions of a particle-based metafluid in which particles support both strong magnetic and electric dipole resonances at visible wavelengths. The spectral overlap of the electric and magnetic resonances gives rise to directional Kerker scattering. The extinction measurements show excellent agreement with Mie theory, supporting the idea that the fabrication process enables particles with narrow distributions in size, shape, and composition. This single-step gas-phase process can also produce Mie-resonant nanoparticles of dielectric materials other than silicon and directly deposit them on the desired substrates.

Biosensing Technologies: A Focus Review on Recent Advancements in Surface Plasmon Coupled Emission

In the past decade, novel nano-engineering protocols have been actively synergized with fluorescence spectroscopic techniques to yield higher intensity from radiating dipoles, through the process termed plasmon-enhanced fluorescence (PEF). Consequently, the limit of detection of analytes of interest has been dramatically improvised on account of higher sensitivity rendered by augmented fluorescence signals. Recently, metallic thin films sustaining surface plasmon polaritons (SPPs) have been creatively hybridized with such PEF platforms to realize a substantial upsurge in the global collection efficiency in a judicious technology termed surface plasmon-coupled emission (SPCE). While the process parameters and conditions to realize optimum coupling efficiency between the radiating dipoles and the plasmon polaritons in SPCE framework have been extensively discussed, the utility of disruptive nano-engineering over the SPCE platform and analogous interfaces such as 'ferroplasmon-on-mirror (FPoM)' as well as an alternative technology termed 'photonic crystal-coupled emission (PCCE)' have been seldom reviewed. In light of these observations, in this focus review, the myriad nano-engineering protocols developed over the SPCE, FPoM and PCCE platform are succinctly captured, presenting an emphasis on the recently developed cryosoret nano-assembly technology for photo-plasmonic hotspot generation (first to fourth). These technologies and associated sensing platforms are expected to ameliorate the current biosensing modalities with better understanding of the biophysicochemical processes and related outcomes at advanced micro-nano-interfaces. This review is hence envisaged to present a broad overview of the latest developments in SPCE substrate design and development for interdisciplinary applications that are of relevance in environmental as well as biological heath monitoring.

Intelligent metasurface system for automatic tracking of moving targets and wireless communications based on computer vision

The fifth-generation (5G) wireless communication has an urgent need for target tracking. Digital programmable metasurface (DPM) may offer an intelligent and efficient solution owing to its powerful and flexible controls of electromagnetic waves and advantages of lower cost, less complexity and smaller size than the traditional antenna array. Here, we report an intelligent metasurface system to perform target tracking and wireless communications, in which computer vision integrated with a convolutional neural network (CNN) is used to automatically detect the locations of moving targets, and the dual-polarized DPM integrated with a pre-trained artificial neural network (ANN) serves to realize the smart beam tracking and wireless communications. Three groups of experiments are conducted for demonstrating the intelligent system: detection and identification of moving targets, detection of radio-frequency signals, and real-time wireless communications. The proposed method sets the stage for an integrated implementation of target identification, radio environment tracking, and wireless communications. This strategy opens up an avenue for intelligent wireless networks and self-adaptive systems.

Strong Plasmon-Mie Resonance in Si@Pd Core-Ω Shell Nanocavity

The surface plasmon resonance (SPR) and localized surface plasmon resonance (LSPR) can be used to enhance the generation of the hot electrons in plasmon metal nanocavity. In this paper, Pd nanomembrane (NMB) is sputtered on the surface of Si nanosphere (NS) on glass substrate to form the Si@Pd core-Ω shell nanocavity. A plasmon-Mie resonance is induced in the nanocavity by coupling the plasmon resonance with the Mie resonance to control the optical property of Si NS. When this nanocavity is excited by near-infrared-1 (NIR-1, 650 nm-900 nm) femtosecond (fs) laser, the luminescence intensity of Si NS is dramatically enhanced due to the synergistic interaction of plasmon and Mie resonance. The generation of resonance coupling regulates resonant mode of the nanocavity to realize multi-dimensional nonlinear optical response, which can be utilized in the fields of biological imaging and nanoscale light source.

High-speed laser writing of structural colors for full-color inkless printing

It is a formidable challenge to simultaneously achieve wide-gamut, high-resolution, high-speed while low-cost manufacturability, long-term stability, and viewing-angle independence in structural colors for practical applications. The conventional nanofabrication techniques fail to match the requirement in low-cost, large-scale and flexible manufacturing. Processing by pulsed lasers can achieve high throughput while suffering from a narrow gamut of ~15% sRGB or angle-dependent colors. Here, we demonstrate an all-in-one solution for ultrafast laser-produced structural colors on ultrathin hybrid films that comprise an absorbent dielectric TiAlN layer coating on a metallic TiN layer. Under laser irradiation, the absorption behaviours of the TiAlN-TiN hybrid films are tailored by photothermal-induced oxidation on the topmost TiAlN. The oxidized films exhibit double-resonance absorption, which is due to the non-trivial phase shifts both at the oxide-TiAlN interface, and at the TiAlN-TiN interface. By varying the accumulated laser fluence to modulate the oxidation depth, angle-robust structural colors with unprecedented large-gamut of ~90% sRGB are obtained. The highest printing speed reaches 10 cm²/s and the highest resolution exceeds 10000 dpi. The durability of the laser-printed colors is confirmed by fastness examination, including salt spray, double-85, light bleaching, and adhesion tests. These features render our technique to be competitive for industrial applications.

A 6G meta-device for 3D varifocal

The sixth-generation (6G) communication technology is being developed in full swing and is expected to be faster and better than the fifth generation. The precise information transfer directivity and the concentration of signal strength are the key topics of 6G technology. We report the synthetic phase design of rotary doublet Airy beam and triplet Gaussian beam varifocal meta-devices to fully control the terahertz beam's propagation direction and coverage area. The focusing spot can be delivered to arbitrary positions in a two-dimensional plane or a three-dimensional space. The highly concentrated signal can be delivered to a specific position, and the transmission direction can be adjusted freely to enable secure, flexible, and high-directivity 6G communication systems. This technology avoids the high costs associated with extensive use of active components. 6G communication systems, wireless power transfer, zoom imaging, and remote sensing will benefit from large-scale adoption of such a technology.

High-Sensitivity Sensing in All-Dielectric Metasurface Driven by Quasi-Bound States in the Continuum

Quasi-bound states in the continuum (quasi-BIC) in all-dielectric metasurfaces provide a crucial platform for sensing due to its ability to enhance strong matter interactions between light-waves and analytes. In this study, a novel high-sensitivity all-dielectric sensor composed of a periodic array of silicon (Si) plates with square nanoholes in the continuous near-infrared band is theoretically proposed. By adjusting the position of the square nanohole, the symmetry-protected BIC and Friedrich-Wintgen BIC (FW-BIC) can be excited. The torodial dipole (TD) and electric quadruple (EQ) are demonstrated to play a dominating role in the resonant modes by near-field analysis and multipole decomposition. The results show that the sensitivity, the Q-factor, and the corresponding figure of merit (FOM) can simultaneously reach 399 nm/RIU (RIU is refractive index unit), 4959, and 1281, respectively. Compared with other complex nanostructures, the proposed metasurface is more feasible and practical, which may open up an avenue for the development of ultrasensitive sensors.