Carbon-atom wires: 1-D systems with tunable properties

X-ray Photoelectron Spectra of Ag-Au Colloidal Nanoparticles after Interaction with Linear Carbon Chains

The results of X-ray photoelectron spectra (XPS) characterization of the surface of Ag-Au colloidal nanoparticles (Ag-Au NPs), prepared by laser ablation in water before and after interaction with linear carbon chains (LCC), are presented. No additional features appear in high-energy resolved XPS core level spectra of Ag-Au NPs which indicates that surface is not oxidized. The measurements of XPS Ag 3d-spectrum of (Ag-Au)@LCC manifests the additional low-energy structure that is associated with the formation of Ag–C bonds. The charge transfer between Au atoms on the NPs surface and LCC was established. Additionally, some oxidation of the Ag atoms on the surface of (Ag-Au)@LCC is observed which arises during laser ablation in water. We assume that oxidative species will preferably interact with the areas outside the LCC instead of oxidizing the carbon chains which was confirmed by XPS C 1s spectra.

Structural, Electronic, and Vibrational Properties of a Two-Dimensional Graphdiyne-like Carbon Nanonetwork Synthesized on Au(111): Implications for the Engineering of sp-sp2 Carbon Nanostructures

Graphdiyne, atomically thin two-dimensional (2D) carbon nanostructure based on sp-sp2 hybridization is an appealing system potentially showing outstanding mechanical and optoelectronic properties. Surface-catalyzed coupling of halogenated sp-carbon-based molecular precursors represents a promising bottom-up strategy to fabricate extended 2D carbon systems with engineered structure on metallic substrates. Here, we investigate the atomic-scale structure and electronic and vibrational properties of an extended graphdiyne-like sp-sp2 carbon nanonetwork grown on Au(111) by means of the on-surface synthesis. The formation of such a 2D nanonetwork at its different stages as a function of the annealing temperature after the deposition is monitored by scanning tunneling microscopy (STM), Raman spectroscopy, and combined with density functional theory (DFT) calculations. High-resolution STM imaging and the high sensitivity of Raman spectroscopy to the bond nature provide a unique strategy to unravel the atomic-scale properties of sp-sp2 carbon nanostructures. We show that hybridization between the 2D carbon nanonetwork and the underlying substrate states strongly affects its electronic and vibrational properties, modifying substantially the density of states and the Raman spectrum compared to the free standing system. This opens the way to the modulation of the electronic properties with significant prospects in future applications as active nanomaterials for catalysis, photoconversion, and carbon-based nanoelectronics.

Stabilization of Linear C3 by Two Donor Ligands: A Theoretical Study of L-C3 -L (L=PPh3 , NHCMe , cAACMe )*

Quantum chemical studies using density functional theory and ab initio methods have been carried out for the molecules L-C3 -L with L=PPh3 (1), NHCMe (2, NHC=N-heterocyclic carbene), and cAACMe (3, cAAC=cyclic (alkyl)(amino) carbene). The calculations predict that 1 and 2 have equilibrium geometries where the ligands are bonded with rather acute bonding angles at the linear C3 moiety. The phosphine adduct 1 has a synclinal (gauche) conformation whereas 2 exhibits a trans conformation of the ligands. In contrast, the compound 3 possesses a nearly linear arrangement of the carbene ligands at the C3 fragment. The bond dissociation energies of the ligands have the order 1<2<3. The bonding analysis using charge and energy decomposition methods suggests that 3 is best described as a cumulene with electron-sharing double bonds between neutral fragments (cAACMe )2 and C3 in the respective electronic quintet state yielding (cAACMe )=C3 =(cAACMe ). In contrast, 1 and 2 possess electron-sharing and dative bonds between positively charged ligands [(PPh3 )2 ]+ or [(NHCMe )2 ]+ and negatively charged [C3 ]- fragments in the respective doublet state.

Resonance-Enhanced Charge Delocalization in Carbazole-Oligoyne-Oxadiazole Conjugates

There are notably few literature reports of electron donor-acceptor oligoynes, even though they offer unique opportunities for studying charge transport through "all-carbon" molecular bridges. In this context, the current study focuses on a series of carbazole-(C≡C)_n-2,5-diphenyl-1,3,4-oxadiazoles (n = 1-4) as conjugated π-systems in general and explores their photophysical properties in particular. Contrary to the behavior of typical electron donor-acceptor systems, for these oligoynes, the rates of charge recombination after photoexcitation increase with increasing electron donor-acceptor distance. To elucidate this unusual performance, we conducted detailed photophysical and time-dependent density functional theory investigations. Significant delocalization of the molecular orbitals along the bridge indicates that the bridging states come into resonance with either the electron donor or acceptor, thereby accelerating the charge transfer. Moreover, the calculated bond lengths reveal a reduction in bond-length alternation upon photoexcitation, indicating significant cumulenic character of the bridge in the excited state. In short, strong vibronic coupling between the electron-donating N-arylcarbazoles and the electron-accepting 1,3,4-oxadiazoles accelerates the charge recombination as the oligoyne becomes longer.

Optical gap and fundamental gap of oligoynes and carbyne

The optoelectronic properties of various carbon allotropes and nanomaterials have been well established, while the purely sp-hybridized carbyne remains synthetically inaccessible. Its properties have therefore frequently been extrapolated from those of defined oligomers. Most analyses have, however, focused on the main optical transitions in UV-Vis spectroscopy, neglecting the frequently observed weaker optical bands at significantly lower energies. Here, we report a systematic photophysical analysis as well as computations on two homologous series of oligoynes that allow us to elucidate the nature of these weaker transitions and the intrinsic photophysical properties of oligoynes. Based on these results, we reassess the estimates for both the optical and fundamental gap of carbyne to below 1.6 eV, significantly lower than previously suggested by experimental studies of oligoynes.

Carbyne, a linear sp-hybridized carbon allotrope, is synthetically inaccessible and its properties are extrapolated from those of defined oligomers. Here the authors analyze weak optical bands in two series of oligoynes and reassess the optical and fundamental gap of carbyne to lower values than previously suggested.

Raman Scattering Cross Section of Confined Carbyne

We experimentally quantify the Raman scattering from individual carbyne chains confined in double-walled carbon nanotubes. We find that the resonant differential Raman cross section of confined carbyne is on the order of 10^-22 cm² sr^-1 per atom, making it the strongest Raman scatterer ever reported.

Excitonic Fine Structure in Emission of Linear Carbon Chains

We studied monatomic linear carbon chains stabilized by gold nanoparticles attached to their ends and deposited on a solid substrate. We observe spectral features of straight chains containing from 8 to 24 atoms. Low-temperature PL spectra reveal characteristic triplet fine structures that repeat themselves for carbon chains of different lengths. The triplet is invariably composed of a sharp intense peak accompanied by two broader satellites situated 15 and 40 meV below the main peak. We interpret these resonances as an edge-state neutral exciton and positively and negatively charged trions, respectively. The time-resolved PL shows that the radiative lifetime of the observed quasiparticles is about 1 ns, and it increases with the increase of the length of the chain. At high temperatures a nonradiative exciton decay channel appears due to the thermal hopping of carriers between parallel carbon chains. Excitons in carbon chains possess large oscillator strengths and extremely low inhomogeneous broadenings.

TAO-DFT investigation of electronic properties of linear and cyclic carbon chains

It has been challenging to adequately investigate the properties of nanosystems with radical nature using conventional electronic structure methods. We address this challenge by calculating the electronic properties of linear carbon chains (l-CC[n]) and cyclic carbon chains (c-CC[n]) with n = 10-100 carbon atoms, using thermally-assisted-occupation density functional theory (TAO-DFT). For all the cases investigated, l-CC[n]/c-CC[n] are ground-state singlets, and c-CC[n] are energetically more stable than l-CC[n]. The electronic properties of l-CC[n]/c-CC[n] reveal certain oscillation patterns for smaller n, followed by monotonic changes for larger n. For the smaller carbon chains, odd-numbered l-CC[n] are more stable than the adjacent even-numbered ones; c-CC[[Formula: see text]]/c-CC[4m] are more/less stable than the adjacent odd-numbered ones, where m are positive integers. As n increases, l-CC[n]/c-CC[n] possess increasing polyradical nature in their ground states, where the active orbitals are delocalized over the entire length of l-CC[n] or the whole circumference of c-CC[n].

On-Surface Synthesis of Cumulene-Containing Polymers via Two-Step Dehalogenative Homocoupling of Dibromomethylene-Functionalized Tribenzoazulene

Cumulene compounds are notoriously difficult to prepare and study because their reactivity increases dramatically with the increasing number of consecutive double bonds. In this respect, the emerging field of on-surface synthesis provides exceptional opportunities because it relies on reactions on clean metal substrates under well-controlled ultrahigh-vacuum conditions. Here we report the on-surface synthesis of a polymer linked by cumulene-like bonds on a Au(111) surface via sequential thermally activated dehalogenative C-C coupling of a tribenzoazulene precursor equipped with two dibromomethylene groups. The structure and electronic properties of the resulting polymer with cumulene-like pentagon-pentagon and heptagon-heptagon connections have been investigated by means of scanning probe microscopy and spectroscopy methods and X-ray photoelectron spectroscopy, complemented by density functional theory calculations. Our results provide perspectives for the on-surface synthesis of cumulene-containing compounds, as well as protocols relevant to the stepwise fabrication of carbon-carbon bonds on surfaces.

Carbon Nanomaterial-Based Nanofluids for Direct Thermal Solar Absorption

Recently, many scientists have been making remarkable efforts to enhance the efficiency of direct solar thermal absorption collectors that depends on working fluids. There are a number of heat transfer fluids being investigated and developed. Among these fluids, carbon nanomaterial-based nanofluids have become the candidates with the most potential by the heat absorbing and transfer properties of the carbon nanomaterials. This paper provides an overview of the current achievements in preparing and exploiting carbon nanomaterial-based nanofluids to direct thermal solar absorption. In addition, a brief discussion of challenges and recommendations for future work is presented.

How to Bend a Cumulene

Allenes (carbodicarbenes) and [3]cumulenes are linear carbon chains that can be bent when the terminal group has a strong carbene nature. This bending can be quite pronounced in allenes but not in [3]cumulenes. In this study, how N-heterocyclic or cyclic (alkyl)(amino) carbene (NHC and CAAC, respectively) terminal groups can modify the linear structure of [n]cumulenes has been analyzed. A low π acidity of the terminal carbene affects the linearity of [2n]cumulenes. Indeed, it has been found that the NHC [4]cumulene is extremely bent, contrary to classical [4]cumulenes. The predicted NHC [4]cumulene or tricarbodicarbene has two lone pairs and the π electrons are delocalized over the whole molecule. More significantly, DFT calculations have shown that this bent [4]cumulene is very stable, considerably more so than the corresponding [3]cumulene, which has been elusive to synthesize. Remarkably, calculations have shown that all the NHC [2n]cumulenes are more than 25 kcal mol^-1 more stable than the [2n-1]cumulenes.

A Field-Effect Transistor Based on Cumulenic sp-Carbon Atomic Wires

Carbyne and linear carbon structures based on sp-hybridization are attractive targets as the ultimate one-dimensional system (i.e., one-atom in diameter) featuring wide tunability of optical and electronic properties. Two possible structures exist for sp-carbon atomic wires: (a) the polyynes with alternated single-triple bonds and (b) the cumulenes with contiguous double bonds. Theoretical studies predict semiconducting behavior for polyynes, while cumulenes are expected to be metallic. Very limited experimental work, however, has been directed toward investigating the electronic properties of these structures, mostly at the single-molecule or monolayer level. However, sp-carbon atomic wires hold great potential for solution-processed thin-film electronics, an avenue not exploited to date. Herein, we report the first field-effect transistor (FET) fabricated employing cumulenic sp-carbon atomic wires as a semiconductor material. Our proof-of-concept FET device is easily fabricated by solution drop casting and paves the way for exploiting sp-carbon atomic wires as active electronic materials.

Solvent-dependent termination, size and stability in polyynes synthesized via laser ablation in liquids

UV-vis and SERS spectroscopy reveal the solvent effect on termination, size and stability in polyynes synthesized via laser ablation in liquids.

Understanding the singlet–triplet energy splittings in transition metal-capped carbon chains

Density functional theory and molecular orbital analysis suggest that the odd–even alternation of singlet–triplet energy separations is a general feature of transition metal-capped carbon chains, determined primarily by the carbon chains.

Distorted structures in half-filled p-band materials

Many half-filled p-band materials form complex, semiconducting or semi-metallic crystallographic structures, which are commonly conceived of as distortions of simpler, higher-symmetry structures. This distortion is conventionally attributed to the energy gained by the opening of a band gap in the vicinity of the Fermi level, which was assumed to lower the overall energy of the lattice. Applying DFT calculations of the total energy and its component terms to both elemental and binary half-filled p-band materials, we show that the energy gain from distortion arises from the Coulombic interactions. Furthermore, we demonstrate that although the distortion is followed by an opening of a band gap, there may be other changes of the same order of magnitude in lower energy levels of the electrons. These results are demonstrated to apply both in the distortion parameter space of a specific phase and between different phases with different symmetries. It is therefore our conclusion that, in contrast to the prevailing concept, the metal-semiconductor or metal-semimetal transitions of such materials are the consequence of the distortion rather than its cause. This may suggest a more general mechanism of high-to-low symmetry transitions, relevant also to other distorted structures which do not demonstrate the same electronic transitions.

Molecular junction by tunneling in 1D and quasi-1D systems

We have investigated electron tunneling through two one-dimensional (1D) molecular junctions based on first-principles simulations using the density functional theory combined with the non-equilibrium Green's functions methodology. The first junction, composed of left and right carbyne wire electrodes with a sodium atom in between, is atomically thin. The second one is quasi-one-dimensional (quasi-1D) and consists of two single-wall carbon nanotube electrodes, closed on the tips and again a sodium atom in the scattering region. Although the bridging atom bonds weakly to the electrodes in both systems, it strongly affects the electronic transport properties, such as electron transmission, current-voltage relation, differential conductance, density of states and eigenchannels. This is demonstrated by comparing with the results obtained from the corresponding systems for both the 1D and the quasi-1D junctions in the absence of the central sodium atom. The revealed transport properties are sensitive to the molecular geometry. This helps future molecular electronic device design.

Scanning tunneling microscopy and Raman spectroscopy of polymeric sp-sp2 carbon atomic wires synthesized on the Au(111) surface

Long linear carbon nanostructures based on sp-hybridization can be synthesized by exploiting on-surface synthesis of halogenated precursors evaporated on Au(111), thus opening a way to investigations by surface-science techniques. By means of an experimental approach combining scanning tunneling microscopy and spectroscopy (STM and STS) with ex situ Raman spectroscopy we investigate the structural, electronic and vibrational properties of polymeric sp-sp2 carbon atomic wires composed by sp-carbon chains connected through phenyl groups. Density-functional-theory (DFT) calculations of the structure and the electronic density of states allow us to simulate STM images and to compute Raman spectra. The comparison of experimental data with DFT simulations unveil the properties and the formation stages as a function of the annealing temperature. Atomic-scale structural information from STM complement the Raman sensitivity to the single molecular bond to open the way to detailed understanding of these novel carbon nanostructures.

Darcy–Forchheimer Radiative Flow of Micropoler CNT Nanofluid in Rotating Frame with Convective Heat Generation/Consumption

Since 1991, from the beginning of the carbon nanotube era, this has been a focus point for investigation due to its synthetic and simple nature. Unique properties like good stiffness, high surface area, and resilience of carbon nanotubes (CNTs) have been investigated in many engineering applications such as hydrogen storage, composite material, energy storage, electrochemical super-capacitors, transistors, sensors, and field-emitting devices. Keeping in view these applications, we investigate single and multi-walled CNTs nanofluid flow having water as the base fluid between parallel and horizontal rotating plates with microstructure and inertial properties. The thermal radiation effect is considered for variable phenomenon of heat generation/consumption. The principal equations are first symmetrically transformed to a system of nonlinear coupled ordinary differential equations (ODEs), and then, Homotopy Analysis Technique (HAM) and numerical method are employed for solving these coupled equations. The obtained analytical and numerical results are explained graphically and through different tables. The HAM and numerical results show an excellent agreement. The Skin friction and the Nusselt number are numerically calculated and then analyzed with the already published results, and these results are found to be in agreement with one another. The impact of important parameters are shown graphically.

Oxidation stability of confined linear carbon chains, carbon nanotubes, and graphene nanoribbons as 1D nanocarbons

Three typical one-dimensional (1D)/quasi-1D nanocarbons, linear carbon chains, carbon nanotubes, and graphene nanoribbons have been proved to grow inside single-walled carbon nanotubes. This gives rise to three types of hybrid materials whose behaviour and properties compared among each other are far from being understood. After proving the successful synthesis of these nanostructured materials in recently published work, we have now been able to study their oxidation stability systematically by using resonance Raman spectroscopy. Surprisingly, the linear carbon chains, which have been theoretically predicted to be very unstable, are actually thermally stable up to 500 °C, assisted by the protection of the carbon nanotube hosts. Besides, longer linear carbon chains inside narrower CNTs are more stable than the shorter ones inside larger tubes, suggesting that the thermal stability not only depends on the length of linear carbon chains alone, but it is correlated with the confinement of the host tubes in a more complicated manner. In addition, graphene nanoribbons overall appear to be the most stable confined structures. On the other hand, peculiarities like the higher stability of the (6,5) CNT compared to that of its (6,4) counterpart allow this study to provide a solid platform for further studies on the application of these 1D nanocarbons (including true 1D linear carbon chains) under ambient conditions.

A BN analog of two-dimensional triphenylene-graphdiyne: stability and properties

Motivated by the feasibility of hybridizing C- and BN-units as well as the recent synthesis of a triphenylene-graphdiyne (TpG) monolayer, for the first time we explore the stability and electronic band structure of the Tp-BNyne monolayer composed of C-chains and the BN analog of triphenylene (Tp-BNyne) by using density functional theory. We find that the single layer Tp-BNyne is stable and exhibits a semiconducting character with a direct band gap of 3.78 eV. The band gap of Tp-BNyne can be flexibly tuned in a wide range by applying uniaxial straining in different directions, or by changing the length of the carbon chain, or by stacking in multilayers with different configurations, while the feature of a direct band gap can be well maintained. These intriguing characteristics endow the Tp-BNyne monolayer with additional advantages over the pristine TpG monolayer, which would stimulate more effort on the design and synthesis of novel 2D materials with high stability, tunable porosity, and controllable functionality for nanoelectronic and optoelectronic applications.

Intensified C≡C Stretching Vibrator and Its Potential Role in Monitoring Ultrafast Energy Transfer in 2D Carbon Material by Nonlinear Vibrational Spectroscopy

In this work, an intensity-enhanced C≡C stretching infrared (IR) absorption is observed in hexakis[(trimethylsilyl)ethynyl]benzene (HTEB), whose IR transition dipole magnitude becomes comparable to that of a typical C═O stretch, and the enhancement is believed to be due to a joint effect of π-π conjugation and hyperconjugation associated with a terminal trimethylsilyl group. Using dynamical time-dependent two-dimensional infrared (2D IR) spectroscopy, a picosecond intramolecular energy redistribution process is observed between two nondegenerate C≡C stretching modes, whose symmetry breaking is attributed to a noncovalent halogen-bonding interaction between HTEB and solvent CH₂Cl₂. The rigid structure of HTEB and limited structural dynamics are also inferred from the insignificant initial spectral diffusion value extracted from the 2D IR spectra. This work provides the first nonlinear infrared investigation of the conventionally weak C≡C stretch. The methods outlined are particularly important for detailed understanding of the structure-related processes such as vibrational energy transfer in novel C≡C species containing materials such as graphdiyne.

Atomic Scale Imaging of Reversible Ring Cyclization in Graphene Nanoconstrictions

We present an atomic level study of reversible cyclization processes in suspended nanoconstricted regions of graphene that form linear carbon chains (LCCs). Before the nanoconstricted region reaches a single linear carbon chain (SLCC), we observe that a double linear carbon chain (DLCC) structure often reverts back to a ribbon of sp² hybridized oligoacene rings, in a process akin to the Bergman rearrangement. When the length of the DLCC system only consists of ∼5 atoms in each LCC, full recyclization occurs for all atoms present, but for longer DLCCs we find that only single sections of the chain are modified in their bonding hybridization and no full ring closure occurs along the entire DLCCs. This process is observed in real time using aberration-corrected transmission electron microscopy and simulated using density functional theory and tight binding molecular dynamics calculations. These results show that DLCCs are highly sensitive to the adsorption of local gas molecules or surface diffusion impurities and undergo structural modifications.

Structure modulated charge transfer in carbon atomic wires

sp-Hybridized carbon atomic wires are appealing systems with large property tunability. In particular, their electronic properties are intimately related to length, structure, and type of functional end-groups as well as to other effects such as the intermolecular charge transfer with metal nanoparticles. Here, by a combined Raman, Surface Enhanced Raman Scattering (SERS) investigation and first principles calculations of different N,N-dimethylanilino-terminated polyynes, we suggest that, upon charge transfer interaction with silver nanoparticles, the function of sp-carbon atomic wire can change from electron donor to electron acceptor by increasing the wire length. In addition, the insertion into the wire of a strong electrophilic group (1,1,4,4-tetracyanobuta-1,3-diene-2,3-diyl) changes the electron-accepting molecular regions involved in this intermolecular charge transfer. Our results indicate that carbon atomic wires could display a tunable charge transfer between the sp-wire and the metal, and hold promise as active materials in organic optoelectronics and photovoltaics.

Entropy Generation of Carbon Nanotubes Flow in a Rotating Channel with Hall and Ion-Slip Effect Using Effective Thermal Conductivity Model

This article examines the entropy analysis of magnetohydrodynamic (MHD) nanofluid flow of single and multiwall carbon nanotubes between two rotating parallel plates. The nanofluid flow is taken under the existence of Hall current and ion-slip effect. Carbon nanotubes (CNTs) are highly proficient heat transmission agents with bordering entropy generation and, thus, are considered to be a capable cooling medium. Entropy generation and Hall effect are mainly focused upon in this work. Using the appropriate similarity transformation, the central partial differential equations are changed to a system of ordinary differential equations, and an optimal approach is used for solution purposes. The resultant non-dimensional physical parameter appear in the velocity and temperature fields discussed using graphs. Also, the effect of skin fraction coefficient and Nusselt number of enclosed physical parameters are discussed using tables. It is observed that increased values of magnetic and ion-slip parameters reduce the velocity of the nanofluids and increase entropy generation. The results reveal that considering higher magnetic forces results in greater conduction mechanism.

Electronic transport properties in the stable phase of a cumulene/B7/cumulene molecular bridge investigated using density functional theory and a tight-binding method

In this study, we first obtain the single-band tight-binding parameters of a B₇ cluster in terms of matching the HOMO–LUMO levels obtained from density functional theory (DFT).

Selective synthesis of iridium(iii) end-capped polyynes by oxidative addition of 1-iodopolyynes to Vaska's complex

The reaction of bis(triphenylphosphine)iridium(i) carbonyl chloride (Vaska's complex) with a series of 1-iodopolyynes (1-C_nI and 2-C_nI) gave σ-polyynyl iridium(iii) complexes with general formula R(C[triple bond, length as m-dash]C)_nIr(PPh₃)₂(Cl)(I)(CO). The use of acetonitrile as a solvent appeared crucial and allowed selectively obtaining only one from a few possible isomers. The X-ray single crystal diffraction experiment for 2-C₄[Ir]I allowed the determination of the exact structure of this complex. Further spectroscopic measurements, especially ³¹P NMR, confirmed the formation of the same type of isomers with trans coordinated phosphines in each case. All complexes were fully characterized with the use of NMR (¹H, ¹³C and ³¹P), IR, UV/Vis, cyclic voltammetry and (ESI)HRMS techniques. Moreover, DFT calculations were performed for all the resulting species. The complexes with a linear carbon chain from butadiyne to decapentayne are the longest iridium end-capped polyynes known to date since only compounds with a (C[triple bond, length as m-dash]C)₂ structural motif have been reported so far. Moreover, we confirmed that the synthetic approach, first used for palladium(ii) end-capped polyynes, may be also applied for the synthesis of other structurally new organometallic polyynes.

Fingerprints of sp¹ Hybridized C in the Near-Edge X-ray Absorption Spectra of Surface-Grown Materials

Carbon structures comprising sp 1 chains (e.g., polyynes or cumulenes) can be synthesized by exploiting on-surface chemistry and molecular self-assembly of organic precursors, opening to the use of the full experimental and theoretical surface-science toolbox for their characterization. In particular, polarized near-edge X-ray absorption fine structure (NEXAFS) can be used to determine molecular adsorption angles and is here also suggested as a probe to discriminate sp 1 /sp 2 character in the structures. We present an ab initio study of the polarized NEXAFS spectrum of model and real sp 1 /sp 2 materials. Calculations are performed within density functional theory with plane waves and pseudopotentials, and spectra are computed by core-excited C potentials. We evaluate the dichroism in the spectrum for ideal carbynes and highlight the main differences relative to typical sp 2 systems. We then consider a mixed polymer alternating sp 1 C 4 units with sp 2 biphenyl groups, recently synthesized on Au(111), as well as other linear structures and two-dimensional networks, pointing out a spectral line shape specifically due to the the presence of linear C chains. Our study suggests that the measurements of polarized NEXAFS spectra could be used to distinctly fingerprint the presence of sp 1 hybridization in surface-grown C structures.

Probing the structures and bonding of auropolyynes, Au-(C≡C) n -Au- (n = 1-3), using high-resolution photoelectron imaging

We report an investigation of a series of auropolyynes, Au-(C≡C) _n -Au^- (n = 1-3), using high-resolution photoelectron imaging and ab initio calculations. Vibrationally resolved photoelectron spectra are obtained, allowing the electron affinities of Au-(C≡C) _n -Au to be accurately measured as 1.651(1), 1.715(1), and 1.873(1) eV for n = 1-3, respectively. Both the Au-C symmetric stretching and a bending vibrational frequency are observed for each neutral auropolyyne. Theoretical calculations find that the ground state of Au₂C₂ ^- has a linear acetylenic Au-C≡C-Au^- structure, whereas the asymmetric Au-Au-C≡C^- structure is a low-lying isomer. However, for Au₂C₄ ^- and Au₂C₆ ^-, our calculations show that the asymmetric Au-Au-(C≡C) _n ^- isomers are the global minima and the Au-(C≡C) _n -Au^- symmetric structures become low-lying isomers. All the asymmetric Au-Au-(C≡C) _n ^- isomers are found computationally to have much higher electron binding energies and are not accessible at the detachment photon energies used in the current study. For neutral Au₂C_2n , the Au-(C≡C) _n -Au auropolyyne structures are found to be the global minima for n = 1-3. The electronic structures and bonding for Au-(C≡C) _n -Au (n = 1-3) are compared with the corresponding Au-(C≡C) _n and Au-(C≡C) _n -H species.

Preparation of long linear carbon chain inside multi-walled carbon nanotubes by cooling enhanced hydrogen arc discharge method

Long linear carbon chains with sp hybridization inside multi-walled carbon nanotubes (LLCC@MWCNTs) can be prepared in the cathode deposits obtained by hydrogen arc discharge. In this work, a cooling system was introduced into the hydrogen arc discharge method to improve the growth yield of LLCC@MWCNTs samples, as indicated by the corresponding stronger Raman peaks between 1780 cm-1 and 1880 cm-1, compared with conventional systems. Moreover, the cooling largely expanded the narrow scope of suitable conditions for the preparation of LLCC@MWCNTs, and high purity samples were easily produced. Qualitative analysis of arc discharge process helped conclude that cooling helps to increase the temperature of arc plasma, which is beneficial to improve both the growth yield of LLCC@MWCNTs and the purity of MWCNTs. This work provides a new approach to improve the growth yield of LLCC@MWCNTs and will benefit further studies and future applications of this new one-dimensional allotrope.

Carbon Nanotube Chirality Determines Properties of Encapsulated Linear Carbon Chain

Long linear carbon chains (LLCCs) encapsulated inside double-walled carbon nanotubes (DWCNTs) are regarded as a promising realization of carbyne, the truly one-dimensional allotrope of carbon. While the electronic and vibronic properties of the encapsulated LLCC are expected to be influenced by its nanotube host, this dependence has not been investigated experimentally so far. Here we bridge this gap by studying individual LLCCs encapsulated in DWCNTs with tip-enhanced Raman scattering (TERS). We reveal that the nanotube host, characterized by its chirality, determines the vibronic and electronic properties of the encapsulated LLCC. By choice of chirality, the fundamental Raman mode (C-mode) of the chain is tunable by ∼95 cm^-1 and its band gap by ∼0.6 eV, suggesting this one-dimensional hybrid system to be a promising building block for nanoscale optoelectronics. No length dependence of the chain's C-mode frequency is evident, making LLCCs a close to perfect representation of carbyne.

Extraction of Linear Carbon Chains Unravels the Role of the Carbon Nanotube Host

Linear carbon chains (LCCs) have been shown to grow inside double-walled carbon nanotubes (DWCNTs), but isolating them from this hosting material represents one of the most challenging tasks toward applications. Herein we report the extraction and separation of LCCs inside single-walled carbon nanotubes (LCCs@SWCNTs) extracted from a double-walled host LCCs@DWCNTs by applying a combined tip-ultrasonic and density gradient ultracentrifugation (DGU) process. High-resolution transmission electron microscopy, optical absorption, and Raman spectroscopy show that not only short LCCs but clearly long LCCs (LLCCs) can be extracted and separated from the host. Moreover, the LLCCs can even be condensed by DGU. The Raman spectral frequency of LCCs remains almost unchanged regardless of the presence of the outer tube of the DWCNTs. This suggests that the major importance of the outer tubes is making the whole synthesis viable. We have also been able to observe the interaction between the LCCs and the inner tubes of DWCNTs, playing a major role in modifying the optical properties of LCCs. Our extraction method suggests the possibility toward the complete isolation of LCCs from CNTs.

Rise of Conjugated Poly-ynes and Poly(Metalla-ynes): From Design Through Synthesis to Structure-Property Relationships and Applications

Conjugated poly-ynes and poly(metalla-ynes) constitute an important class of new materials with potential application in various domains of science. The key factors responsible for the diverse usage of these materials is their intriguing and tunable chemical and photophysical properties. This review highlights fascinating advances made in the field of conjugated organic poly-ynes and poly(metalla-ynes) incorporating group 4-11 metals. This includes several important aspects of conjugated poly-ynes viz. synthetic protocols, bonding, electronic structure, nature of luminescence, structure-property relationships, diverse applications, and concluding remarks. Furthermore, we delineated the future directions and challenges in this particular area of research.

Supermultiplexed optical imaging and barcoding with engineered polyynes

Optical multiplexing has a large impact in photonics, the life sciences and biomedicine. However, current technology is limited by a 'multiplexing ceiling' from existing optical materials. Here we engineered a class of polyyne-based materials for optical supermultiplexing. We achieved 20 distinct Raman frequencies, as 'Carbon rainbow', through rational engineering of conjugation length, bond-selective isotope doping and end-capping substitution of polyynes. With further probe functionalization, we demonstrated ten-color organelle imaging in individual living cells with high specificity, sensitivity and photostability. Moreover, we realized optical data storage and identification by combinatorial barcoding, yielding to our knowledge the largest number of distinct spectral barcodes to date. Therefore, these polyynes hold great promise in live-cell imaging and sorting as well as in high-throughput diagnostics and screening.