Peptide-functionalized gold nanoparticles: versatile biomaterials for diagnostic and therapeutic applications

Synergies with and Resistance to Membrane-Active Peptides

Membrane-active peptides (MAPs) have long been thought of as the key to defeating antimicrobial-resistant microorganisms. Such peptides, however, may not be sufficient alone. In this review, we seek to highlight some of the common pathways for resistance, as well as some avenues for potential synergy. This discussion takes place considering resistance, and/or synergy in the extracellular space, at the membrane, and during interaction, and/or removal. Overall, this review shows that researchers require improved definitions of resistance and a more thorough understanding of MAP-resistance mechanisms. The solution to combating resistance may ultimately come from an understanding of how to harness the power of synergistic drug combinations.

Establishing empirical design rules of nucleic acid templates for the synthesis of silver nanoclusters with tunable photoluminescence and functionalities towards targeted bioimaging applications

DNA-templated silver nanoclusters (AgNCs) are an emerging class of ultrasmall (<2 nm) fluorophores with increasing popularity for bioimaging due to their facile synthesis and tunable emission color. However, design rules correlating different nucleotide sequences with the photoemission properties of AgNCs are still largely unknown, preventing the rational design of DNA templates to fine-tune the emission color, brightness and functionalities of AgNCs for any targeted applications. Herein, we report a systematic investigation to understand the empirical influences of the four basic DNA nucleotides on AgNC synthesis and their effects on photoluminescence properties. After establishing the importance of nucleotide-Ag⁺ binding and AgNC encapsulation within DNA tetraplex structures, we then determined the unique attributes of each individual nucleobase using different combinations of systematically varied DNA templates. Using the empirical design rules established herein, we were able to predict the photoluminescence behaviours of AgNCs templated by complex aptamer sequences with specific binding affinity to human cancer cells, and to deliberately control their emission color by rational modifications of the DNA template sequences for targeted bioimaging. Our empirical findings from this systematic experimentation can contribute towards the rational design of DNA sequences to customise the photoluminescence properties and biofunctionalities of DNA-protected AgNCs towards multicolour targeted bioimaging applications.

Electrostatically bound lanreotide peptide - gold nanoparticle conjugates for enhanced uptake in SSTR2-positive cancer cells

Lanreotide peptide (LP) has high affinity to somatostatin receptors like SSTR2 and is commonly used in the treatment of neuro-endocrine tumors. The main objective of this study is to target gold nanoparticles (AuNPs) towards SSTR2-positive cancer cells using lanreotide peptide (LP) as the targeting agent for enhanced tumor uptake and antitumor activity. pH mediated changes in the surface potential of LP and AuNP is used to prepare electrostatically bound AuNP-LP complexes. AuNP-LP complex formation was demonstrated by UV-Visible spectroscopy, surface potential, dynamic light scattering (DLS), small angle X-ray scattering and HR-TEM. Confocal microscopy and flow cytometric studies show that AuNP-LP complex has higher cellular uptake in SSTR2 expressed cancer cells (MCF-7 and AR42J) than in CHO cells. The enhanced cellular uptake of LP coated AuNPs lead to ~1.5 to 2-fold GSH depletion and enhanced ROS generation in MCF-7 cells. The preferential cytotoxicity of the AuNP-LP complex towards MCF-7 and AR42J cells, as revealed by MTT assay, is consistent with the increased cellular uptake. Our studies demonstrate that LP coated AuNP can be used as an effective platform to selectively target SSTR2 positive cancer cells for combination therapy approaches involving gold nanoparticles.

Simultaneous quantitative analysis of K+ and Tl+ in serum and drinking water based on UV-Vis spectra and chemometrics

The simultaneous detection of K⁺ and Tl⁺ can serve as a toxicological diagnostic tool for thallium poisoning. Colorimetric-reaction-based nanoprobes have emerged as promising sensors for the rapid and ultrasensitive detection of molecular species in simple systems. However, the development of viable screening tools for multicomponent analysis in complex systems remains challenging owing to interference from coexisting materials in the media. Herein, a simple chemical sensor array based on the peroxidase-like activity of gold nanoparticles modified with single-stranded DNA (AuNPs-ssDNA) and chemometrics was developed for the simultaneous detection of K⁺ and Tl⁺ in aqueous solutions and serum. The use of a K⁺ adapter conferred high selectivity to the developed method. Optimized AuNPs-ssDNAs were used to construct a sensor array, which together with chemometrics provided fingerprints that can facilitate the simultaneous analysis of multiple components. The developed colorimetric reaction in combination with the chemometrics assay was directly used as a biosensor array, which exhibited detection limits of 107.33 nM for K⁺ and 19.26 nM for Tl⁺. The developed method could potentially serve as a diagnostic technique for investigating thallium poisoning and toxicology.

Rational Design of Functional Peptide-Gold Hybrid Nanomaterials for Molecular Interactions

Gold nanoparticles (AuNPs) have been extensively used for decades in biosensing-related development due to outstanding optical properties. Peptides, as newly realized functional biomolecules, are promising candidates of replacing antibodies, receptors, and substrates for specific molecular interactions. Both peptides and AuNPs are robust and easily synthesized at relatively low cost. Hence, peptide-AuNP-based bio-nano-technological approaches have drawn increasing interest, especially in the field of molecular targeting, cell imaging, drug delivery, and therapy. Many excellent works in these areas have been reported: demonstrating novel ideas, exploring new targets, and facilitating advanced diagnostic and therapeutic technologies. Importantly, some of them also have been employed to address real practical problems, especially in remote and less privileged areas. This contribution focuses on the application of peptide-gold hybrid nanomaterials for various molecular interactions, especially in biosensing/diagnostics and cell targeting/imaging, as well as for the development of highly active antimicrobial/antifouling coating strategies. Rationally designed peptide-gold nanomaterials with functional properties are discussed along with future challenges and opportunities.

Fluorescence for biological logic gates

Biological logic gates are smart probes able to respond to biological conditions in behaviors similar to computer logic gates, and they pose a promising challenge for modern medicine. Researchers are creating many kinds of smart nanostructures that can respond to various biological parameters such as pH, ion presence, and enzyme activity. Each of these conditions alone might be interesting in a biological sense, but their interactions are what define specific disease conditions. Researchers over the past few decades have developed a plethora of stimuli-responsive nanodevices, from activatable fluorescent probes to DNA origami nanomachines, many explicitly defining logic operations. Whereas many smart configurations have been explored, in this review we focus on logic operations actuated through fluorescent signals. We discuss the applicability of fluorescence as a means of logic gate implementation, and consider the use of both fluorescence intensity as well as fluorescence lifetime.

Preclinical Evaluation of NHS-Activated Gold Nanoparticles Functionalized with Bombesin or Neurotensin-Like Peptides for Targeting Colon and Prostate Tumours

Recent advances and large-scale use of hybrid imaging modalities like PET-CT have led to the necessity of improving nano-drug carriers that can facilitate both functional and metabolic screening in nuclear medicine applications. In this study, we focused on the evaluation of four potential imaging nanoparticle structures labelled with the 68Ga positron emitter. For this purpose, we functionalized NHS-activated PEG-gold nanoparticles with 68Ga-DOTA-Neuromedin B, 68Ga-DOTA-PEG(4)-BBN(7-14), 68Ga-DOTA-NT and 68Ga-DOTA-Neuromedin N. In vitro binding kinetics and specific binding to human HT-29 colon carcinoma cells and DU-145 prostate carcinoma cells respectively were assessed, over 75% retention being obtained in the case of 68Ga-DOTA-PEG(4)-BBN(7-14)-AuNP in prostate tumour cells and over 50% in colon carcinoma cells. Biodistribution in NU/J mice highlighted a three-fold uptake increase in tumours at 30 min post-injection of 68Ga-DOTA-NT-AuNP and 68Ga-DOTA-PEG(4)-BBN(7-14)-AuNP compared to 68Ga-DOTA-NT and 68Ga-DOTA-PEG(4)-BBN(7-14) respectively, therewith fast distribution in prostate and colon tumours and minimum accumulation in non-targeted tissues.

Atmospheric-Pressure Pulsed Discharge Plasma in a Slug Flow Reactor System for the Synthesis of Gold Nanoparticles

Gold nanoparticle (AuNP) formation by applying pulsed discharge plasma in the slug flow reactor system was demonstrated. Experiments were carried out continuously at room temperature. The argon gas as a gas phase and the hydrogen tetrachloroaurate(III) tetra hydrate solution containing lysine as a liquid phase simultaneously flowed in the slug flow reactor system. The flow rates of the feed solution and argon gas were kept at 1.5 and 0.2 mL/min, respectively. To generate discharge plasma, the AC power supply with a bipolar pulsed output at 10 kV was applied. The purple color solution product was obtained, and the ultraviolet-visible (UV-vis) spectrophotometer showed that this possessed the absorption light from 510 to 550 nm associated with the existence of gold nanoparticles in each collected sample. Transmission electron microscopy (TEM) revealed that the lysine-capped AuNPs were produced in a spherical morphology and dispersed in aqueous solution products with a diameter of less than 20 nm.

A proof-of-concept of lateral flow based luteinizing hormone detection in urine for ovulation prediction in buffaloes

We present a method for the detection of luteinizing hormone (LH) in buffalo urine by using gold nanoparticles (AuNPs) conjugated with novel anti-peptide antibodies against LH (anti LHP) in lateral flow assay format. Buffalo LH is an important reproductive hormone and is a chemically complex glycoprotein. Its surge release precedes ovulation and therefore detecting LH has implications in identifying the ovulation event. Any sensor thus developed for sensing LH may have the potential for predicting ovulation and hence can assist herd managers in making decisions on the timing of artificial insemination. Recombinant LH production is time consuming, difficult and costly. Hence, we identified an epitope peptide sequence in buffalo LH and raised antibodies against it. The chemically synthesized peptide and antibodies were used for developing the sensor. The gold nanoparticles and conjugates were characterized through physicochemical methods which confirmed the binding of peptides and antibodies to the gold nanoparticles. A qualitative ELISA for sensing LH was developed based on competitive binding of gold nanoparticles conjugated with the epitope peptide and LH towards the anti-peptide antibodies against LH. We also further explored the detection of LH in buffalo urine using the gold nanoparticle-LHP conjugate (AuNP-LHP) in dipstick format. These experiments provided a proof-of-concept towards applicability of the LH based sensor for ovulation prediction in buffaloes.

Self-assembled peptide-inorganic nanoparticle superstructures: from component design to applications

Peptides have become excellent platforms for the design of peptide-nanoparticle hybrid superstructures, owing to their self-assembly and binding/recognition capabilities. Morover, peptide sequences can be encoded and modified to finely tune the structure of the hybrid systems and pursue functionalities that hold promise in an array of high-end applications. This feature article summarizes the different methodologies that have been developed to obtain self-assembled peptide-inorganic nanoparticle hybrid architectures, and discusses how the proper encoding of the peptide sequences can be used for tailoring the architecture and/or functionality of the final systems. We also describe the applications of these hybrid superstructures in different fields, with a brief look at future possibilities towards the development of new functional hybrid materials.

Numerical evaluation of polyethylene glycol ligand conjugation to gold nanoparticle surface using ToF-SIMS and statistical analysis

Nanoparticles (NPs) are substances between 1 and 100 nm in size. They have been the subject of numerous studies because of their potential applications in a wide range of fields such as cosmetics, electronics, medicine, and food. For biological applications of nanoparticles, they are usually coated with a substance capable of preventing agglomeration of the nanoparticles and nonspecific binding and exhibiting water-solubility characteristics with specific immobilized (bio)molecules. In order to evaluate the chemical properties of the surface-modified nanoparticles for bioapplications, including drug delivery, a simple and reliable method for the analysis of the presence of the surface chemicals and the ligand states of the nanoparticles is necessary. In this study, the authors numerically evaluated the extent of polyethylene glycol (PEG) ligand conjugation on AuNPs by concurrently adopting a microliquid inkjet printing system for sampling of the PEGylated AuNPs solution and ToF-SIMS imaging together with statistical analysis. The statistical correlation values calculated from the signals of PEG and Au measured by ToF-SIMS imaging on the sample spots made by a microliquid inkjet printing system showed better reproducibility and improved correlation values compared to the pipet spotting. Their improved method will be useful to evaluate ligand-conjugated nanoparticles for quality control of each conjugation process.

Advances in the application of gold nanoparticles in bone tissue engineering

The materials used in bone tissue engineering (BTE) have been advancing with each passing day. With the continuous development of nanomedicine, gold nanoparticles (GNPs), which are easy to be synthesized and functionalized, have attracted increasing attention. Recent years have witnessed this amazing material, i.e., GNPs characterized with large surface area to volume ratio, biocompatibility, medical imaging property, hypotoxicity, translocation into the cells, high reactivity, and other properties, perform distinct functions in BTE. However, the low stability of GNPs in the biotic environment makes them in the requirements of modification or recombination before being used. After being combined with the advantages of other materials, the structures of GNPs have exhibited great potential in stem cells, scaffolds, delivery systems, medical imaging, and other aspects. This review will focus on the advances in the application of GNPs after modification or recombination with other materials to BTE.

Nanomedicine - a promising therapy for hematological malignancies

Hematological tumors are a group of diseases defined as the clonal proliferation of blood-forming cells. In recent years, incidences of hematological malignancies have increased. Traditional methods of diagnosing hematological tumors are primarily based on observing morphological features under light microscopy, and molecular diagnostics and immunological indicators are powerful auxiliary diagnostic methods. However, traditional methods cannot efficiently identify tumor markers and limit the efficiency and accuracy of diagnosis. Although treatment methods have been improved continuously, chemotherapy remains a primary technique for the treatment of hematological tumors. Traditional chemotherapy exhibits poor drug selectivity and lacks good biocompatibility and pharmacokinetic properties. The therapeutic effect is not ideal and the risk of toxic side effects is high. The nanosize and surface charge properties of nanodrugs are effective in improving drug delivery efficiency. The high load and rich surface modification methods of nanomaterials provide various possibilities for improving the biocompatibility and pharmacokinetics of drugs, as well as the targeting of drugs. In addition, a nanomedicine loading platform can load multiple drugs simultaneously and design the optimal proportion of combined drug schemes, which can improve the efficacy of drugs and reduce the occurrence of drug resistance. With their unique physical and chemical properties and biological characteristics, the application of nanoparticles in the diagnosis and treatment of hematological tumors has received considerable attention. In this review, we summarize recent advances in the application of various types of nanostructures for the diagnosis and treatment of hematological malignancies, investigate the advantages of nanomedicine compared with the traditional diagnosis and treatment of hematological tumors, and discuss their biological security and application prospects.

Peptide-based targeting of immunosuppressive cells in cancer

Cancer progression is marked by the infiltration of immunosuppressive cells, such as tumor-associated macrophages (TAMs), regulatory T lymphocytes (Tregs), and myeloid-derived suppressor cells (MDSCs). These cells play a key role in abrogating the cytotoxic T lymphocyte-mediated (CTL) immune response, allowing tumor growth to proceed unabated. Furthermore, targeting these immunosuppressive cells through the use of peptides and peptide-based nanomedicine has shown promising results. Here we review the origins and functions of immunosuppressive cells in cancer progression, peptide-based systems used in their targeting, and explore future avenues of research regarding cancer immunotherapy. The success of these studies demonstrates the importance of the tumor immune microenvironment in the propagation of cancer and the potential of peptide-based nanomaterials as immunomodulatory agents.

Amphiphilic tri- and tetra-block co-polymers combining versatile functionality with facile assembly into cytocompatible nanoparticles

In order for synthetic polymers to find widespread practical application as biomaterials, their syntheses must be easy to perform, utilising freely available building blocks, and should generate products which have no adverse effects on cells or tissue. In addition, it is highly desirable that the synthesis platform for the biomaterials can be adapted to generate polymers with a range of physical properties and macromolecular architectures, and with multiple functional handles to allow derivatisation with 'actives' for sensing or therapy. Here we describe the syntheses of amphiphilic tri- and tetra-block copolymers, using diazabicyclo[5.4.0]undec-5-ene (DBU) as a metal-free catalyst for ring-opening polymerisations of the widely-utilised monomer lactide combined with a functionalised protected cyclic carbonate. These syntheses employed PEGylated macroinitiators with varying chain lengths and architectures, as well as a labile-ester methacrylate initiator, and produced block copolymers with good control over monomer incorporation, molar masses, side-chain and terminal functionality and physico-chemical properties. Regardless of the nature of the initiators, the fidelity of the hydroxyl end group was maintained as confirmed by a second ROP chain extension step, and polymers with acryloyl/methacryloyl termini were able to undergo a second tandem reaction step, in particular thiol-ene click and RAFT polymerisations for the production of hyperbranched materials. Furthermore, the polymer side-chain functionalities could be easily deprotected to yield an active amine which could be subsequently coupled to a drug molecule in good yields. The resultant amphiphilic copolymers formed a range of unimolecular or kinetically-trapped micellar-like nanoparticles in aqueous environments, and the non-cationic polymers were all well-tolerated by MCF-7 breast cancer cells. The rapid and facile route to such highly adaptable polymers, as demonstrated here, offers promise for a range of bio materials applications.

Emergence in protein derived nanomedicine as anticancer therapeutics: More than a tour de force

Cancer has thwarted as a major health problem affecting the global population. With an alarming increase in the patient population suffering from diverse varieties of cancers, the global demographic data predicts sharp escalation in the number of cancer patients. This can be expected to reach 420 million cases by 2025. Among the diverse types of cancers, the most frequently diagnosed cancers are the breast, colorectal, prostate and lung cancer. From years, conventional treatment approaches like surgery, chemotherapy and radiation therapy have been practiced. In the past few years, increasing research on molecular level diagnosis and treatment of cancers have significantly changed the realm of cancer treatment. Lately, uses of advanced chemotherapy and immunotherapy like treatments have gained significant progress in the cancer therapy, but these approaches have several limitations on their safety and toxicity. This has generated lot of momentum for the evolution of new drug delivery approaches for the effective delivery of anticancer therapeutics, which may improve the pharmacokinetic and pharmacodynamic effect of the drugs along with significant reduction in the side effects. In this regard, the protein-based nano-medicines have gained wider attention in the management of cancer. Proteins are organic macromolecules essential, for life and have quite well explored in developing the nano-carriers. Furthermore, it provides passive or active tumour cell targeted delivery, by using protein based nanovesicles or virus like structures, antibody drug conjugates, viral particles, etc. Moreover, by utilizing various formulation strategies, both the animal and plant derived proteins can be converted to produce self-assembled virus like nano-metric structures with high efficiency in targeting the metastatic cancer cells. Therefore, the present review extensively discusses the applications of protein-based nano-medicine with special emphasis on intracellular delivery/drug targeting ability for anticancer drugs.

Gold nanoparticles stabilized by PEG-tagged imidazolium salts as recyclable catalysts for the synthesis of propargylamines and the cycloisomerization of γ-alkynoic acids

Water-soluble gold nanoparticles prepared in the presence of PEG-tagged tris-imidazolium bromide, containing Au(0) and Au(i) species, are reusable catalysts.

Targeting Integrins in Cancer Nanomedicine: Applications in Cancer Diagnosis and Therapy

Due to advancements in nanotechnology, the application of nanosized materials (nanomaterials) in cancer diagnostics and therapeutics has become a leading area in cancer research. The decoration of nanomaterial surfaces with biological ligands is a major strategy for directing the actions of nanomaterials specifically to cancer cells. These ligands can bind to specific receptors on the cell surface and enable nanomaterials to actively target cancer cells. Integrins are one of the cell surface receptors that regulate the communication between cells and their microenvironment. Several integrins are overexpressed in many types of cancer cells and the tumor microvasculature and function in the mediation of various cellular events. Therefore, the surface modification of nanomaterials with integrin-specific ligands not only increases their binding affinity to cancer cells but also enhances the cellular uptake of nanomaterials through the intracellular trafficking of integrins. Moreover, the integrin-specific ligands themselves interfere with cancer migration and invasion by interacting with integrins, and this finding provides a novel direction for new treatment approaches in cancer nanomedicine. This article reviews the integrin-specific ligands that have been used in cancer nanomedicine and provides an overview of the recent progress in cancer diagnostics and therapeutic strategies involving the use of integrin-targeted nanomaterials.

Whey peptide-encapsulated silver nanoparticles as a colorimetric and spectrophotometric probe for palladium(II)

Silver nanoparticles (AgNPs) coated with whey peptides are shown to be a useful optical nanoprobe for the highly sensitive determination of Pd(II). The peptidic surface of the AgNPs works as a molecular receptor for the rapid detection of Pd(II) via a color change from dark yellow to orange/red along with a spectral red-shift with a gap about 120 nm. The effect is caused by the formation of a coordination complex between Pd(II) and the peptide ligands. This results in the aggregation of AgNPs and an absorbance spectral shift from 410 to 530 nm. The absorbance response is linear in the range 0.1 to 1.3 μM Pd(II) with a low detection limit of 115 nM. The nanoprobe responds within a few minutes and is not interfered by other metal ions except for Mg(II). The probe potentially can be applied to the determination of Pd(II) contamination in the products of Pd(II)-catalyzed organic reactions and in pharmaceutical settings. Graphical abstractSchematic representation of the nanoprobe for Pd(II). (a) Synthesis of whey peptide-coated silver nanoparticles (AgNPs), (b) the nanoprobe design for Pd(II) detection, (c) HR-TEM imaging and elemental mapping, (d) quantitative determination of Pd(II) (Inset shows colorimetric results).

Optical Diagnostic Based on Functionalized Gold Nanoparticles

Au nanoparticles (NPs) possess unique physicochemical and optical properties, showing great potential in biomedical applications. Diagnostic spectroscopy utilizing varied Au NPs has become a precision tool of in vitro and in vivo diagnostic for cancer and other specific diseases. In this review, we tried to comprehensively introduce the remarkable optical properties of Au NPs, including localized surfaces plasmon resonance (LSPR), surface-enhanced Raman scattering (SERS), and metal-enhanced fluorescence (MEF). Then, we highlighted the excellent works using Au NPs for optical diagnostic applications. Ultimately, the challenges and future perspective of using Au NPs for optical diagnostic were discussed.

Toxicological Behavior of Gold Nanoparticles on Various Models: Influence of Physicochemical Properties and Other Factors

Potential applications of gold nanoparticles in biomedicine have increasingly been reported on account of the ease of synthesis, bioinert characteristics, optical properties, chemical stability, high biocompatibility, and specificity. The safety of these particles remains a great concern, as there are differences among toxicity study protocols used. This article focuses on integrating results of research on the toxicological behavior of gold nanoparticles. This can be influenced by the physicochemical properties, including size, shape, surface charge, and other factors, such as methods used in the synthesis of gold nanoparticles, models used, dose, in vivo route of administration, and interference of gold nanoparticles with in vitro toxicity assay systems. Several researchers have reported toxicological studies with regard to gold nanoparticles, using various in vitro, in vivo, and in ovo models. The conflicting results concerning the toxicity of gold nanoparticles should thus be addressed to justify the safe use of gold nanoparticles in biomedicine.

Gold Nanoparticles and Nanorods in Nuclear Medicine: A Mini Review

In the last decade, many innovative nanodrugs have been developed, as well as many nanoradiocompounds that show amazing features in nuclear imaging and/or radiometabolic therapy. Their potential uses offer a wide range of possibilities. It can be possible to develop nondimensional systems of existing radiopharmaceuticals or build engineered systems that combine a nanoparticle with the radiopharmaceutical, a tracer, and a target molecule, and still develop selective nanodetection systems. This review focuses on recent advances regarding the use of gold nanoparticles and nanorods in nuclear medicine. The up-to-date advancements will be shown concerning preparations with special attention on the dimensions and functionalizations that are most used to attain an enhanced performance of gold engineered nanomaterials. Many ideas are offered regarding recent in vitro and in vivo studies. Finally, the recent clinical trials and applications are discussed.

A stimuli-responsive drug release nanoplatform for kidney-specific anti-fibrosis treatment

The renoprotective effects of hypoxia inducible-factor (HIF) activators have been demonstrated by improving renal hypoxia in chronic kidney disease. Cobalt chloride is one of the most widely used HIF activators in biomedicine; however, poor kidney targeting and undesirable side effects greatly limit its clinical applications. Here, we report a novel stimuli-responsive drug release nanoplatform in which glutathione (GSH)-modified Au nanoparticles (GLAuNPs) and Co2+ self-assemble into nanoassemblies (GLAuNPs-Co) through coordination interactions between empty orbitals of Co2+ and lone pairs of GSH. The GLAuNPs, when used as a drug carrier, demonstrated high drug loading capacity and pH-triggered drug release after assembling with Co2+. The acidic environment of lysosomes in renal fibrosis tissues could disassemble GLAuNPs-Co and release Co2+. Moreover, encapsulation of the Co2+ ions in the GLAuNPs greatly lowered the cytotoxicity of Co2+ in kidney tubule cells. Tissue fluorescence imaging showed that GLAuNPs-Co specifically accumulated in the kidneys, especially in the renal proximal tubules. After GLAuNPs-Co was intraperitoneally injected into ureter-obstructed mice, significant attenuation of interstitial fibrosis was exhibited. The beneficial effects can be mainly ascribed to miR-29c expression restored by HIF-α activation. These findings revealed that GLAuNPs-Co have pH-responsive drug release and renal targeting capabilities; thus, they are a promising drug delivery platform for treating kidney disease.

Intrinsic Effects of Gold Nanoparticles on Oxygen-Glucose Deprivation/Reperfusion Injury in Rat Cortical Neurons

This study aimed to investigate the potential effects of gold nanoparticles (Au-NPs) on rat cortical neurons exposed to oxygen-glucose deprivation/reperfusion (OGD/R) and to elucidate the corresponding mechanisms. Primary rat cortical neurons were exposed to OGD/R, which is commonly used in vitro to mimic ischemic injury, and then treated with 5- or 20-nm Au-NPs. We then evaluated cell viability, apoptosis, oxidative stress, and mitochondrial respiration in these neurons. We found that 20-nm Au-NPs increased cell viability, alleviated neuronal apoptosis and oxidative stress, and improved mitochondrial respiration after OGD/R injury, while opposite effects were observed for 5-nm Au-NPs. In terms of the underlying mechanisms, we found that Au-NPs could regulate Akt signaling. Taken together, these results show that 20-nm Au-NPs can protect primary cortical neurons against OGD/R injury, possibly by decreasing apoptosis and oxidative stress, while activating Akt signaling and mitochondrial pathways. Our results suggest that Au-NPs may be potential therapeutic agents for ischemic stroke.

The Role of Ligands in the Chemical Synthesis and Applications of Inorganic Nanoparticles

The design of nanoparticles is critical for their efficient use in many applications ranging from biomedicine to sensing and energy. While shape and size are responsible for the properties of the inorganic nanoparticle core, the choice of ligands is of utmost importance for the colloidal stability and function of the nanoparticles. Moreover, the selection of ligands employed in nanoparticle synthesis can determine their final size and shape. Ligands added after nanoparticle synthesis infer both new properties as well as provide enhanced colloidal stability. In this article, we provide a comprehensive review on the role of the ligands with respect to the nanoparticle morphology, stability, and function. We analyze the interaction of nanoparticle surface and ligands with different chemical groups, the types of bonding, the final dispersibility of ligand-coated nanoparticles in complex media, their reactivity, and their performance in biomedicine, photodetectors, photovoltaic devices, light-emitting devices, sensors, memory devices, thermoelectric applications, and catalysis.

Conjugation of an α-Helical Peptide to the Surface of Gold Nanoparticles

We are interested in functionalizing gold nanoparticles (AuNPs) with proteins using a biomimetic approach in which an intermediate peptide "glue" directs the orientation of a protein relative to the AuNP surface. The first step toward this goal is described in the present article. Specifically, we show that ∼5 nm AuNPs can be functionalized with a mixed self-assembled monolayer (SAM) consisting of oligo(ethylene glycol) alkanethiols terminated with either hydroxyl or azide groups, and that the resulting materials are stable and soluble in water. The azide groups on the surface of the AuNPs can be subsequently linked to alkyne-functionalized peptides via a copper-catalyzed azide-alkyne cycloaddition (click) reaction. Analysis of the resulting material by Fourier transform infrared and circular dichroism spectroscopy demonstrates that the peptide is covalently linked to the SAM and that it exists in an α-helical conformation. In addition to our intended purpose of using these highly structured, biomimetic materials to orient proteins, they may also be useful for applications involving interactions between nanoparticles and cells.

Clinical Application of AMPs

Antimicrobial peptides (AMPs) have been described as one of the most promising compounds able to address one of the main health threats of the twenty-first century that is the continuous rise of multidrug-resistant microorganisms. However, despite the clear advantages of AMPs as a new class of antimicrobials, such as broad spectrum of activity, high selectivity, low toxicity and low propensity to induce resistance, only a small fraction of AMPs reported thus far have been able to successfully complete all phases of clinical trials and become accessible to patients. This is mainly related to the low bioavailability and still somewhat expensive production of AMP along with regulatory obstacles. This chapter offers an overview of selected AMPs that are currently in the market or under clinical trials. Strategies for assisting AMP industrial translation and major regulatory difficulties associated with AMP approval for clinical evaluation will be also discussed.

A study on the preparation of alkyne functional nanoparticlesviaRAFT emulsion polymerisation

We evaluate the parameters surrounding the preparation of colloidally stable alkyne functional latex nanoparticlesviaRAFT emulsion polymerisation.

Highly stable near-infrared dye conjugated cerasomes for fluorescence imaging-guided synergistic chemo-photothermal therapy of colorectal cancer

Dye-conjugated cerasome loaded with DOX exhibited high stability and controllable drug release, holding great promise in colorectal cancer photothermal chemotherapy.

In situ synthesis, stabilization and activity of protein-modified gold nanoparticles for biological applications

We demonstrate an in situ synthesis, stabilization and activity of a nanoparticle-based protein carrier platform via the Layer-by-Layer (LbL) technology.

A TEM-traceable physiologically functional gold nanoprobe that permeates non-endocytic cells

Background

Nanoparticles’ intracellular fate requires proper internalization. Most cells make use of a battery of internalization pathways, but some are practically sealed, as they lack the biochemical machinery for cellular intake. Non-endocytic cells, such as mammals’ spermatozoa, challenge standard drug-delivery strategies.

Purpose

In this article, we present a gold nanoprobe that permeates the external and internal membranes of human sperm.

Methods

Our design makes use of a gold nanoparticle functionalized with a membrane-permeable cysteine-rich recombinant protein. The chimeric protein contains two units of physiologically active metallothioneins (MT) that also provide binding motifs to gold and a cell-penetrating-peptide sequence (CPP) that confers cell permeability to the nanoparticle.

Results

Transmission electron microscopy, indirect immunofluorescence, and functional assays show that the nanoprobe is readily internalized in sperm, without compromising cell integrity, while preserving MT’s physiological activity. Our findings highlight the potential of CPP-functionalized nanogold for investigating the physiology of otherwise impermeable non-endocytic cells.

Short elastin-like peptide-functionalized gold nanoparticles that are temperature responsive under near-physiological conditions

Thermally-responsive, short elastin-like peptides (ELPs) of sequence VPGVG (V, P and G represent valine, proline and glycine respectively), bearing different N-terminal functional groups (amino-, N-acetyl and thiol) and a non-ionisable C-terminal group, were prepared by solid phase synthesis. The conformation and aggregation properties of the ELPs were studied in different pH aqueous buffer solutions using UV-vis spectroscopy and circular dichroism (CD). The thiol-capped ELPs were used to prepare functionalized gold nanoparticles (GNPs), which were found to undergo thermally-triggered reversible aggregation at 40 °C. The peptide conformation and nanoparticle aggregation behaviour of the ELP-GNPs in aqueous solution were investigated by transmission electron microscopy (TEM), circular dichroism (CD) and UV-vis spectroscopy. It was found that the ELP-GNP conjugates were capable of reversible, thermally triggered aggregation at near-physiological temperatures (transition temperature of 40 °C at pH = 7.4), opening up applications in photothermal cancer therapy and diagnosis.

Tailor-Made Functional Peptide Self-Assembling Nanostructures

Noncovalent interactions are the main driving force in the folding of proteins into a 3D functional structure. Motivated by the wish to reveal the mechanisms of the associated self-assembly processes, scientists are focusing on studying self-assembly processes of short protein segments (peptides). While this research has led to major advances in the understanding of biological and pathological process, only in recent years has the applicative potential of the resulting self-assembled peptide assemblies started to be explored. Here, major advances in the development of biomimetic supramolecular peptide assemblies as coatings, gels, and as electroactive materials, are highlighted. The guiding lines for the design of helical peptides, β strand peptides, as well as surface binding monolayer-forming peptides that can be utilized for a specific function are highlighted. Examples of their applications in diverse immerging applications in, e.g., ecology, biomedicine, and electronics, are described. Taking into account that, in addition to extraordinary design flexibility, these materials are naturally biocompatible and ecologically friendly, and their production is cost effective, the emergence of devices incorporating these biomimetic materials in the market is envisioned in the near future.

Potentiation of the activation of cholinergic receptors by multivalent presentation of ligands supported on gold nanoparticles

Gold nanoparticles (NP) with a functionalized ligand shell offer the possibility to potentiate the action of agonists at the receptor site by multivalency. In order to find out whether this can be realized for the pharmacologically important class of cholinergic receptors known to be involved in the regulation of most organ functions, carbachol-functionalized gold NPs (Au-MUDA-CCh) with an average diameter of 14 nm were synthesized. As functional read-out, cholinergic agonist-induced anion secretion was measured as increase in short-circuit current (Isc) across rat proximal colon in Ussing chambers. Similarly to the corresponding native agonist acetylcholine, Au-MUDA-CCh induced a concentration-dependent increase in Isc, which represents chloride secretion across the epithelium. This response was inhibited by atropine and hexamethonium indicating the activation of muscarinic and nicotinic receptors by the functionalized NPs. A strong potentiation of ligand-receptor interaction was a key benefit of functionalized NPs over native agonists. This was observed with physiological approaches as measurements of changes in Isc revealed a nearly equivalent response evoked by 1 pM Au-MUDA-CCh and 500 nM native CCh. To better determine this potentiation at the receptor level, pharmacological approaches based on the signaling cascade of ACh-induced activation of muscarinic receptors were used. FRET (Förster Resonance Energy Transfer) measurements performed on HEK293T cells transiently transfected with M3-R, Gαq-YFP, Gβ1-wt and CFP-Gγ2, revealed that both Au-MUDA-CCh and native CCh activated G-proteins with EC50 amounting to 127 ± 0.44 fM and 224 ± 7.12 nM, respectively. Thus, the functionalization of the NPs with CCh yields a potentiation by over 106, a property that could find usage in specific targeting, activation and compensation of pathologically reduced expression of receptors of interest.

Characterizing the Surface Coverage of Protein-Gold Nanoparticle Bioconjugates

Functional enzyme-nanoparticle bioconjugates are increasingly important in biomedical and biotechnology applications such as drug delivery and biosensing. Optimization of the function of such bioconjugates requires careful control and characterization of their structures and activity, but current methods are inadequate for this purpose. A key shortcoming of existing approaches is the lack of an accurate method for quantitating protein content of bioconjugates for low (monolayer) surface coverages. In this study, an integrated characterization methodology for protein-gold nanoparticle (AuNP) bioconjugates is developed, with a focus on site-specific attachment and surface coverage of protein on AuNPs. Single-cysteine-containing mutants of dihydrofolate reductase are covalently attached to AuNPs with diameters of 5, 15, and 30 nm, providing a range of surface curvature. Site-specific attachment to different regions of the protein surface is investigated, including attachment to a flexible loop versus a rigid α helix. Characterization methods include SDS-PAGE, UV-vis spectrophotometry, dynamic light scattering, and a novel fluorescence-based method for accurate determination of low protein concentration on AuNPs. An accurate determination of both protein and AuNP concentration in conjugate samples allows for the calculation of the surface coverage. We find that surface coverage is related to the surface curvature of the AuNP, with a higher surface coverage observed for higher surface curvature. The combination of these characterization methods is important for understanding the functionality of protein-AuNP bioconjugates, particularly enzyme activity.

Gold nanoparticles as tracking devices to shed light on the role of caveolin-1 in early stages of melanoma metastasis

AIM

To track early events during lung metastasis, we labeled cells expressing (B16F10_CAV1) or lacking CAV1 (B16F10_mock) with gold nanoparticles conjugated to the peptide TAT (AuNPs-PEG-TAT).

METHODS

B16F10 expressing or lacking CAV1 were labeled with AuNPs-PEG-TAT. The physicochemical properties and cytotoxicity of these nanoparticles, as well as their effects on migration and invasiveness of B16F10 cells in vitro were evaluated. Ex vivo lung distribution of the labeled cells after tail vein injection into C57BL/6 mice was examined.

RESULTS

AuNPs-PEG-TAT did not affect B16F10 viability, migration and invasiveness. The metastatic and tumorigenic capability of the labeled B16F10 was also not modified in comparison to unlabeled B16F10 cells. CAV1 expression favored the retention of B16F10 cells in the lungs of mice 2 h post injection, suggesting CAV1 promoted adherence to endothelial cells and transendothelial migration.

CONCLUSIONS

We developed a protocol to label B16F10 cells with AuNPs-PEG-TAT that permits subsequent tracking of cells in mice. CAV1 overexpression was found to increase retention and transendothelial migration of B16F10 cells in the lung.

Nano-Strategies to Fight Multidrug Resistant Bacteria-"A Battle of the Titans"

Infectious diseases remain one of the leading causes of morbidity and mortality worldwide. The WHO and CDC have expressed serious concern regarding the continued increase in the development of multidrug resistance among bacteria. Therefore, the antibiotic resistance crisis is one of the most pressing issues in global public health. Associated with the rise in antibiotic resistance is the lack of new antimicrobials. This has triggered initiatives worldwide to develop novel and more effective antimicrobial compounds as well as to develop novel delivery and targeting strategies. Bacteria have developed many ways by which they become resistant to antimicrobials. Among those are enzyme inactivation, decreased cell permeability, target protection, target overproduction, altered target site/enzyme, increased efflux due to over-expression of efflux pumps, among others. Other more complex phenotypes, such as biofilm formation and quorum sensing do not appear as a result of the exposure of bacteria to antibiotics although, it is known that biofilm formation can be induced by antibiotics. These phenotypes are related to tolerance to antibiotics in bacteria. Different strategies, such as the use of nanostructured materials, are being developed to overcome these and other types of resistance. Nanostructured materials can be used to convey antimicrobials, to assist in the delivery of novel drugs or ultimately, possess antimicrobial activity by themselves. Additionally, nanoparticles (e.g., metallic, organic, carbon nanotubes, etc.) may circumvent drug resistance mechanisms in bacteria and, associated with their antimicrobial potential, inhibit biofilm formation or other important processes. Other strategies, including the combined use of plant-based antimicrobials and nanoparticles to overcome toxicity issues, are also being investigated. Coupling nanoparticles and natural-based antimicrobials (or other repurposed compounds) to inhibit the activity of bacterial efflux pumps; formation of biofilms; interference of quorum sensing; and possibly plasmid curing, are just some of the strategies to combat multidrug resistant bacteria. However, the use of nanoparticles still presents a challenge to therapy and much more research is needed in order to overcome this. In this review, we will summarize the current research on nanoparticles and other nanomaterials and how these are or can be applied in the future to fight multidrug resistant bacteria.

Colloidal plasmonic gold nanoparticles and gold nanorings: shape-dependent generation of singlet oxygen and their performance in enhanced photodynamic cancer therapy

Introduction

In recognition of the potentials of gold nanoparticles (Au NPs) in enhanced photodynamic therapy (PDT) for cancer, it is desirable to further understand the shape-dependent surface plasmonic resonance (SPR) properties of various gold nanostructures and evaluate their performances in PDT.

Materials and methods

Monodispersed colloidal spherical solid Au NPs were synthesized by UV-assisted reduction using chloroauric acid and sodium citrate, and hollow gold nanorings (Au NRs) with similar outer diameter were synthesized based on sacrificial galvanic replacement method. The enhanced electromagnetic (EM) field distribution and their corresponding efficiency in enhancing singlet oxygen (¹O₂) generation of both gold nanostructures were investigated based on theoretical simulation and experimental measurements. Their shape-dependent SPR response and resulted cell destruction during cellular PDT in combination with 5-aminolevulinic acid (5-ALA) were further studied under different irradiation conditions.

Results

With comparable cellular uptake, more elevated formation of ¹O₂ in 5-ALA-enabled PDT was detected with the presence of Au NRs than that with Au NPs under broadband light irradiation in both cell-free and intracellular conditions. As a result of the unique morphological attributes, exhibiting plasmonic effect of Au NRs was still achievable in the near infrared (NIR) region, which led to an enhanced therapeutic efficacy of PDT under NIR light irradiation.

Conclusion

Shape-dependent SPR response of colloidal Au NPs and Au NRs and their respective effects in promoting PDT efficiency were demonstrated in present study. Our innovative colloidal Au NRs with interior region accessible to surrounding photosensitizers would serve as efficient enhancers of PDT potentially for deep tumor treatment.

Active targeted dual-modal CT/MR imaging of VX2 tumors using PEGylated BaGdF5 nanoparticles conjugated with RGD

RGD-PEG-BaGdF₅ NPs can be used as CT/MR dual-modality contrast agents of solid tumors via the RGD-mediated tumor vasculature targeting strategy.