Metal oxide-based supercapacitors: progress and prospectives

A mesoporous ternary transition metal oxide nanoparticle composite for high-performance asymmetric supercapacitor devices with high specific energy

We report on the optimized fabrication and electrochemical properties of ternary metal oxide (Ti-Mo-Ni-O) nanoparticles as electrochemical supercapacitor electrode materials. The structural, morphological, and elemental composition of the fabricated Ti-Mo-Ni-O via rapid breakdown anodization are elucidated by field emission scanning electron microscopy, Raman, and photoelectron spectroscopy analyses. The Ti-Mo-Ni-O nanoparticles reveal pseudocapacitive behavior with a specific capacitance of 255.4 F g^-1. Moreover, the supercapacitor device Ti-Mo-Ni-O NPs//mesoporous doped-carbon (TMN NPs//MPDC) device exhibited a superior specific energy of 68.47 W h kg^-1 with a corresponding power density of 2058 W kg^-1. The supercapacitor device shows 100% coulombic efficiency with 96.8% capacitance retention over 11 000 prolonged charge/discharge cycles at 10 A g^-1.

Crystal Facet and Architecture Engineering of Metal Oxide Nanonetwork Anodes for High-Performance Potassium Ion Batteries and Hybrid Capacitors

Metal oxides are considered as prospective dual-functional anode candidates for potassium ion batteries (PIBs) and hybrid capacitors (PIHCs) because of their abundance and high theoretic gravimetric capacity; however, due to the inherent insulating property of wide band gaps and deficient ion-transport kinetics, metal oxide anodes exhibit poor K⁺ electrochemical performance. In this work, we report crystal facet and architecture engineering of metal oxides to achieve significantly enhanced K⁺ storage performance. A bismuth antimonate (BiSbO₄) nanonetwork with an architecture of perpendicularly crossed single crystal nanorods of majorly exposed (001) planes are synthesized via CTAB-mediated growth. (001) is found to be the preferential surface diffusion path for superior adsorption and K⁺ transport, and in addition, the interconnected nanorods gives rise to a robust matrix to enhance electrical conductivity and ion transport, as well as buffering dramatic volume change during insertion/extraction of K⁺. Thanks to the synergistic effect of facet and structural engineering of BiSbO₄ electrodes, a stable dual conversion-alloying mechanism based on reversible six-electron transfer per formula unit of ternary metal oxides is realized, proceeding by reversible coexistence of potassium peroxide conversion reactions (KO₂↔K₂O) and Bi_xSb_y alloying reactions (BiSb ↔ KBiSb ↔ K₃BiSb). As a result, BiSbO₄ nanonetwork anodes show outstanding potassium ion storage in terms of capacity, cycling life, and rate capability. Finally, the implementation of a BiSbO₄ nanonetwork anode in the state-of-the-art full cell configuration of both PIBs and PIHCs shows satisfactory performance in a Ragone plot that sheds light on their practical applications for a wide range of K⁺-based energy storage devices. We believe this study will propose a promising avenue to design advanced hierarchical nanostructures of ternary or binary conversion-type materials for PIBs, PIHCs, or even for extensive energy storage.

Sonochemically exfoliated polymer-carbon nanotube interface for high performance supercapacitors

Energy storage characteristics of organic molecules continue to attract attention for supercapacitor applications, as they offer simple processing and can be employed for flexible devices. The current study utilized the ultrasonically driven exfoliation to obtain poly diketo pyrrolopyrrole-thieno thiophene (PDPT) and multiwalled carbon nanotube (CNT) composite, subsequently fabricated a PDPT donor-π-acceptor heterojunction with CNT and investigated energy storage applications. The composite was characterized using series of standard analytical techniques. Morphology indicated well alighted CNT tubes on PDPT polymer nanosheets with an effective interface, providing efficient electrochemical regions, enabling fast charge transfer between PDPT and CNT. We also investigated the PDPT-CNT composite electrochemical behavior, achieving 319.2 and 105.7F.g^-1 capacitances for PDPT-CNT and PDPT at 0.5 A.g^-1 current density for three electrode configurations; and 126 and 42F.g^-1 for symmetric structures, respectively. Experimental results confirmed that PDPT-CNT composite electrodes achieved two fold the capacitance compared with PDPT alone. The hypothesis and synthetic approach provide an excellent candidate for conjugated polymers with carbon nanotubes and energy related devices.

Phyto-synthesized facile Pd/NiOPdO ternary nanocomposite for electrochemical supercapacitor applications

The natural phyto bio-factories were successfully utilized for the cost-effective synthesis of facile Pd/NiOPdO ternary nanocomposite for energy storage application with enhanced electro-active site.

A porous MOF-derived NiMn2O4 material and its superior energy storage performance for high-performance supercapacitors

A binder-free C@NiMn2O4 electroactive material was prepared through the calcination of a pristine Ni,Mn-MOF at 600 °C for 4 h. The fabricated C@NiMn2O4/NF electrode exhibits an area specific capacitance of 5.39 F cm−2 at 2 mA cm−2.

Non-enzymatic electrochemical dopamine sensing probe based on hexagonal shape zinc-doped cobalt oxide (Zn-Co2O4) nanostructure

A non-enzymatic dopamine electrochemical sensing probe was developed. A hexagonal shape zinc-doped cobalt oxide (Zn-Co₂O₄) nanostructure was prepared by a facile hydrothermal approach. The combination of Zn, which has an abundance of electrons, and Co₃O₄ exhibited a synergistically electron-rich nanocomposite. The crystallinity of the nanostructure was investigated using X-ray diffraction. A scanning electron microscope (SEM) was used to examine the surface morphology, revealing hexagonal nanoparticles with an average particle size of 400 nm. High-resolution transmission electron microscopy (HR-TEM) was used to confirm the nanostructure of the doped material. The nanostructure's bonding and functional groups were verified using Fourier transform infrared spectroscopy (FTIR). The electrochemical characterization was conducted by using electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV), and amperometry. The resistivity of the electrode was confirmed through EIS and showed that the bare glassy carbon electrode (GCE) exhibited higher charge transfer resistance as compared to modified Zn-Co₂O₄/GCE. The sensing probe was developed by modifying the surface of GCE with Zn-Co₂O₄ nanostructure and tested as an electrochemical sensor for dopamine oxidation; it operated best at a working potential of 0.17 V (vs Ag/AgCl). The developed sensor exhibited a low limit of detection (0.002 µM), a high sensitivity (126 µA. µM^-1 cm^-2), and a wide linear range (0.2 to 185 µM). The sensor showed a short response time of < 1 s. The sensor's selectivity was investigated in the presence of coexisting species (uric acid, ascorbic acid, adrenaline, epinephrine, norepinephrine, histamine, serotonin, tyramine, phenethylamine, and glucose) with no effects on dopamine determination results. The developed sensor was also successfully used for determining dopamine concentrations in a real sample.

Development of Binder Free Interconnected 3D Flower of NiZn2O4 as an Advanced Electrode Materials for Supercapacitor Applications

The design and development of electrode materials for energy-storage applications is an area of prime focus around the globe because of the shortage of natural resources. In this study, we developed a method for preparing a novel three-dimensional binder-free pseudocapacitive NiZn2O4 active material, which was grown directly over nickel foam (NiZn2O4@3D-NF), using a simple one-step hydrothermal process. The material was characterized by X-ray diffraction, scanning electron microscopy, and transmission electron microscopy. Cyclic voltammetry, galvanostatic charge–discharge, and electrochemical impedance spectroscopy techniques were employed to evaluate the pseudocapacitive performance of the NiZn2O4 active material in a three-electrode assembly cell. The prepared NiZn2O4@3D-NF electrode exhibited an excellent specific capacitance, of 1706.25 F/g, compared to that of the NiO@3D-NF (1050 F/g) electrode because it has the bimetallic characteristics of both zinc and nickel. The NiZn2O4@3D-NF electrode showed better cyclic stability (87.5% retention) compared to the NiO@3D-NF electrode (80% retention) after 5000 cycles at a fixed current density, which also supports the durability of the NiZn2O4@3D-NF electrode. The characteristics of NiZn2O4@3D-NF include corrosion resistance, high conductivity, an abundance of active sites for electrochemical reaction, a high surface area, and synergism between the bimetallic oxides, which make it a suitable candidate for potential application in the field of energy storage.

Formation of NiMoO4 Anisotropic Nanostructures under Hydrothermal Conditions

Abstract—The synthesis of NiMoO4 hierarchical nanostructures using the hydrothermal method has been studied. The decomposition of NiMoO4·xH2O crystalline hydrate formed during the synthesis has been studied using synchronous thermal analysis upon heating in a stream of air and argon. According to X-ray diffraction as well as scanning and transmission electron microscopies, the proposed conditions allow one to synthesize single-phase nanosized (average CSR size of about 25 ± 2 nm) nickel(II) molybdate, which has a spinel-type monoclinic structure (space group C2/m) without impurity inclusions.

Synergetic effect of ZnCo2O4/inorganic salt as a sustainable catalyst system for CO2 utilization

Currently, it is essential to consider the rapidly increasing emission of CO₂ into the atmosphere, causing major environmental issues such as climate change and global warming. In this work, we have developed the binary catalyst system (ZnCo₂O₄/inorganic salt) for chemical fixation of CO₂ with epoxides into cyclic carbonates without solvent, and all reactions were performed on a large scale using a 100 ml batch reactor. Two mesoporous catalysts of ZnCo₂O₄ with different architecture, such as flakes (ZnCo-F) and spheres (ZnCo-S) were synthesized and utilized as a heterogeneous catalyst for cycloaddition reaction. The bifunctional property of catalysts is mainly attributed to strong acidic and basic properties confirmed by TPD (NH₃ & CO₂) analysis. The ZnCo-F catalyst exhibited excellent conversion of propylene oxide (99.9%) with good corresponding selectivity of propylene carbonate (≥99%) in the presence of inorganic salt (KI) at 120 °C, 2 MPa, 3 h. In addition, ZnCo-F catalyst demonstrated good catalytic applicability towards the various substrates scope of the epoxide. Furthermore, the catalytic properties were examined by evaluating the reaction parameter such as catalyst loading, pressure, temperature and time. The proposed catalyst exhibited good reusability for cycloaddition reaction without significant change in its catalytic activity and proposed a possible reaction mechanism for chemical fixation of CO₂ with epoxide into cyclic carbonate over ZnCo-F/KI.

Designing Multifunctional Co and Fe Co-Doped MoS2 Nanocube Electrodes for Dye-Sensitized Solar Cells, Perovskite Solar Cells, and a Supercapacitor

In the present study, three types of specific solid, core-shell, and hollow structured cobalt and iron co-doped MoS2 nanocubes (denoted as s-Co-Fe-MoS x , c-Co-Fe-MoS x , and h-Co-Fe-MoS x ) are controllably synthesized for the first time by regulating the reactant mass ratios. The prepared Co-Fe-MoS x nanocubes can function as a counter electrode in dye-sensitized and perovskite solar cells (DSCs and PSCs) and a working electrode in a supercapacitor. In the DSC system, the c-Co-Fe-MoS x nanocubes exhibit the maximum catalytic activity to the Co3+/2+ redox couple regeneration, and the device achieves a power conversion efficiency (PCE) of 8.69%, significantly higher than the devices using s-Co-Fe-MoS x (6.61%) and h-Co-Fe-MoS x (7.63%) counter electrodes. Similarly, all of the prepared Co-Fe-MoS x nanocubes show decent activity in PSCs and the device using the c-Co-Fe-MoS x counter electrode achieves the highest PCE of 6.88%. It is worth noting that, as the supercapacitor working electrode, the h-Co-Fe-MoS x exhibits a specific capacitance of 85.4 F g-1, significantly higher than the parallel values achieved by the s-Co-Fe-MoS x and c-Co-Fe-MoS x electrodes under identical conditions.

A 2H-MoS2/carbon cloth composite for high-performance all-solid-state supercapacitors derived from a molybdenum dithiocarbamate complex

A molecular complex Mo₂O₂(μ-S)₂(Et₂dtc)₂ (dtc = dithiocarbamate) is prepared and loaded onto carbon cloth (CC) through facile solvothermal treatment, followed by subsequent single-source pyrolysis. This results in a highly porous 2H-MoS₂/CC composite with a sponge-like stacked lamellar morphology. Due to its high porosity and unique nano/microstructure, the MoS₂/CC composite exhibits a specific capacitance of 550.0 F g^-1 at 1 A g^-1, outperforming some 1T-MoS₂ based electrodes. The composite is further assembled into a symmetric all-solid-state supercapacitor, which can be operated stably at a wide potential window and shows a specific capacitance of 127.5 F g^-1 at 1 A g^-1. In addition, the device delivers a high energy density of 70.8 W h kg^-1 at 1 kW kg^-1, which still remains 15.0 W h kg^-1 at 18.0 kW kg^-1. 75% of the performance of the device can be retained after 8000 cycles. Such remarkable electrochemical performance is attributed to its novel nano/microstructures with a large surface area, convenient ion transport pathways, enhanced conductivity, and improved structural stability. Thus, this work demonstrates a highly promising dithiocarbamate-based single-precursor pyrolysis route towards the fabrication of metal sulfides/carbon composites for energy storage applications.

Core-shell NiSe/Ni(OH)2with NiSe nanorods and Ni(OH)2nanosheets as battery-type electrode for hybrid supercapacitors

Novel core-shell nanostructure electrodes benefit from the excellent properties of their constituent materials, as well as the synergy between them. However, it is challenging to fabricate such structures efficiently. In this study, NiSe nanorods were fabricated using Ni foam as the conductive substrate and reactant via a one-step hydrothermal process, and Ni(OH)₂nanosheets were coated on the surface of the nanorods via one-step electrodeposition. The effect of the structure and morphology on the properties of the material was explored using scanning electron microscopy, x-ray diffraction, and electrochemical technology. The obtained core-shell NiSe/Ni(OH)₂exhibited an areal capacity of 1.89 mAh cm^-2at a current density of 5 mA cm^-2. The assembled NiSe/Ni(OH)₂//AC hybrid supercapacitor exhibited excellent energy and power densities, indicating that NiSe/Ni(OH)₂has great potential for use as a battery-type electrode in energy storage systems.

Advanced and Emerging Negative Electrodes for Li-Ion Capacitors: Pragmatism vs. Performance

Li-ion capacitors (LICs) are designed to achieve high power and energy densities using a carbon-based material as a positive electrode coupled with a negative electrode often adopted from Li-ion batteries. However, such adoption cannot be direct and requires additional materials optimization. Furthermore, for the desired device’s performance, a proper design of the electrodes is necessary to balance the different charge storage mechanisms. The negative electrode with an intercalation or alloying active material must provide the high rate performance and long-term cycling ability necessary for LIC functionality—a primary challenge for the design of these energy-storage devices. In addition, the search for new active materials must also consider the need for environmentally friendly chemistry and the sustainable availability of key elements. With these factors in mind, this review evaluates advanced and emerging materials used as high-rate anodes in LICs from the perspective of their practical implementation.

Enhanced electrochemical activities of morphologically tuned MnFe2O4 nanoneedles and nanoparticles integrated on reduced graphene oxide for highly efficient supercapacitor electrodes

The morphology of a nanoparticle strongly controls the path of electronic interaction, which directly correlates with the physicochemical properties and also the electrochemical comportment. Combining it with a two-dimensional (2D) material for a layer-by-layer approach will increase its possibilities in applications such as energy conversion and storage. Here, two different morphologies of MnFe₂O₄, nanoparticles and nanoneedles, are developed by a facile hydrothermal approach and sandwiched with reduced graphene oxide for constructing a 2D/3D sandwiched architecture. The rGO planar structure with abundant hierarchical short pores facilitates the thorough utilization of the utmost surface area to permeate the electrolyte within the structure to minimize the accumulation of rGO nanosheets laterally. The ferrite composited with rGO manifests high specific capacitance as the EDLC behaviour surpasses the faradaic pseudocapacitance boosting electrical conductivity compared to the as-synthesized MnFe₂O₄ structures. Benefiting from a 3D structure and the synergetic contribution of the MnFe₂O₄ nanoneedles and electrically conductive rGO layer, the MnFe₂O₄ nanoneedles@rGO electrode exhibits a high areal capacitance of 890 mF cm^-2 and a remarkable specific capacitance of 1327 F g^-1 at a current density of 5 mA cm^-2. 93.36% of the initial capacitance was retained after 5000 cycles in 1 mol L^-1 Na₂SO₄ indicating its high cycling stability. The synthesis route proves to be beneficial for a comprehensive yield of MnFe₂O₄@rGO nanosheets of different morphologies for use in the sophisticated design of energy-storing devices. This research strongly suggests that nanoparticle geometry, in addition to two-dimensional carbon-based materials, is a critical factor in a supercapacitor design.

Nano-manganese oxide and reduced graphene oxide-incorporated polyacrylonitrile fiber mats as an electrode material for capacitive deionization (CDI) technology

Capacitive deionization (CDI) is a trending water desalination method during which the impurity ions in water can be removed by electrosorption. In this study, nano-manganese dioxide (MnO₂) and reduced graphene oxide (rGO)-doped polyacrylonitrile (PAN) composite fibers are fabricated using an electrospinning technique. The incorporation of both MnO₂ and rGO nanomaterials in the synthesized fibers was confirmed by transmission electron microscopy (TEM), scanning electron microscopy (SEM), and energy dispersive X-ray spectroscopy (EDX). The electrochemical characteristics of electrode materials were examined using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and constant current charge-discharge cycles (CCCDs). The specific capacitance of the PAN electrode increased with increasing MnO₂ and rGO contents as well as when thermally treated at 280 °C. Thermally treated composite fibers with 17% (w/w) MnO₂ and 1% (w/w) rGO (C-rGOMnPAN) were observed to have the best electrochemical performance, with a specific capacitance of 244 F g^-1 at a 10 mV s^-1 scan rate. The electrode system was used to study the removal of sodium chloride (NaCl), cadmium (Cd²⁺) and lead (Pb²⁺) ions. Results indicated that NaCl showed the highest electrosorption (20 472 C g^-1) compared to two heavy metal salts (14 260 C g^-1 for Pb²⁺ and 6265 C g^-1 for Cd²⁺), which is most likely to be due to the ease of mass transfer of lighter Na⁺ and Cl^- ions; When compared, Pb²⁺ ions tend to show more electrosorption on these fibers than Cd²⁺ ions. Also, the C-rGOMnPAN electrode system is shown to work with 95% regeneration efficiency when 100 ppm NaCl is used as the electrolyte. Hence, it is clear that the novel binder-free, electrospun C-rGOMnPAN electrodes have the potential to be used in salt removal and also for the heavy metal removal applications of water purification.

Structural Tuning of a Flexible and Porous Polypyrrole Film by a Template-Assisted Method for Enhanced Capacitance for Supercapacitor Applications

Constructing a rational electrode structure for supercapacitors is critical to accelerate the electrochemical kinetics process and thus promote the capacitance. Focusing on the flexible supercapacitor electrode, we synthesized a three-dimensional (3D) porous polypyrrole (PPy) film using a modified vapor phase polymerization method with the use of a porous template (CaCO₃). The porous design provided the PPy film with an improved surface area and pore volume. The porous PPy film electrode was studied as a binder-free electrode for supercapacitors. It was found that the abundant interpenetrated pores created by the CaCO₃ templates within the 3D framework are beneficial to overcoming the diffusion-controlled limit in the overall electrochemical process. It was revealed by electrochemical investigation that a more pseudocapacitive contribution than diffusion-controlled process contribution was observed in the total charge in the redox reaction. The galvanostatic charge/discharge (GCD) measurements showed that the optimized 3D porous PPy film electrode delivered a high capacitance of 313.6 F g^-1 and an areal capacitance of 98.0 mF cm^-2 at 1.0 A g^-1 in a three-electrode configuration, which is nearly three times that of the dense counterpart electrode synthesized in the absence of the CaCO₃ template. A specific capacitance of 62.5 F g^-1 at 0.5 A g^-1 and 31.1 F g^-1 at 10 A g^-1 was obtained in a symmetric capacitor device. In addition, the porous structure provided the PPy film with the attractive capability of accommodating the volume change during the doping/dedoping process. This is essential for the PPy film to maintain a long cycling life in a practical operation for a supercapacitor. It turned out that a high capacitance retention up to 81.3% after 10,000 GCD cycles was obtained for the symmetric supercapacitor device with the 3D porous PPy electrode (57.1% capacitive retention was observed for the dense PPy electrode). The strategy and the insight analysis are expected to provide valuable guidance for the design and the synthesis of flexible and wearable film electrodes with high performance.

Effect of the Anionic Counterpart: Molybdate vs. Tungstate in Energy Storage for Pseudo-Capacitor Applications

Nickel-based bimetallic oxides (BMOs) have shown significant potential in battery-type electrodes for pseudo-capacitors given their ability to facilitate redox reactions. In this work, two bimetallic oxides, NiMoO4 and NiWO4, were synthesized using a wet chemical route. The structure and electrochemical properties of the pseudo-capacitor cathode materials were characterized. NiMoO4 showed superior charge storage performance in comparison to NiWO4, exhibiting a discharge capacitance of 124 and 77 F.g-1, respectively. NiMoO4, moreover, demonstrates better capacity retention after 1000 cycles with 87.14% compared to 82.22% for NiWO4. The lower electrochemical performance of the latter was identified to result from the redox behavior during cycling. NiWO4 reacts in the alkaline solution and forms a passivation layer composed of WO3 on the electrode, while in contrast, the redox behavior of NiMoO4 is fully reversible.

Controllable design of defect-rich hybrid iron oxide nanostructures on mesoporous carbon-based scaffold for pseudocapacitive applications

The controllable design of functional nanostructures for energy and environmental applications represents a critical yet challenging technology. The existing fabrication strategies focus mainly on increasing the number of accessible active sites. However, these techniques generally necessitate complex chemical agents and suffer from limited experimental conditions delivering high costs, low yields, and poor reproducibility. The present work reports a new strategy for controllable synthesis of a hybrid system including mixed iron oxide nanostructures enriched with non-stoichiometric Fe21.34O32 and Fe3+[Fe5/33+□1/32+]O4 phases, which possess a high concentration of oxygen and Fe2+ vacancies, and a mesoporous carbon-based scaffold (MCS), which was dervied from coffee residues, with graphitic surface and perforated architecture. The nanoperforates acted as trapping sites to localise the FexOy nanoparticles, thereby boosting the density of accessible active sites. Additionally, at the interfacial regions between the FexOy crystallites, a high density of oxygen vacancies with an oriented pattern was shown to create superlattice structures. The energy storage functionality of the defect-rich MCS/FexOy nanostructure with nanoperforated architecture was investigated, where the results exhibited a high gravimetric capacitance of 540 F g-1 at a current density of 1 A g-1 with outstanding capacitance retention of 73.6% after 14 000 cycles.

Selective deposition of metal oxide nanoflakes on graphene electrodes to obtain high-performance asymmetric micro-supercapacitors

To meet the charging market demands of portable microelectronics, there has been a growing interest in high performance and low-cost microscale energy storage devices with excellent flexibility and cycling durability. Herein, interdigitated all-solid-state flexible asymmetric micro-supercapacitors (A-MSCs) were fabricated by a facile pulse current deposition (PCD) approach. Mesoporous Fe2O3 and MnO2 nanoflakes were functionally coated by electrodeposition on inkjet-printed graphene patterns as negative and positive electrodes, respectively. Our PCD approach shows significantly improved adhesion of nanostructured metal oxide with crack-free and homogeneous features, as compared with other reported electrodeposition approaches. The as-fabricated Fe2O3/MnO2 A-MSCs deliver a high volumetric capacitance of 110.6 F cm-3 at 5 μA cm-2 with a broad operation potential range of 1.6 V in neutral LiCl/PVA solid electrolyte. Furthermore, our A-MSC devices show a long cycle life with a high capacitance retention of 95.7% after 10 000 cycles at 100 μA cm-2. Considering its low cost and potential scalability to industrial levels, our PCD technique could be an efficient approach for the fabrication of high-performance MSC devices in the future.

Elevated performance of binder-free Co3O4 electrode for the supercapacitor applications

In the present work, we have designed a symmetric supercapacitor (SS) device by synthesizing a pseudocapacitive binder-free cobalt oxide (Co3O4) thin film based electrode using reactive DC magnetron sputtering technique. The thin film electrodes were characterized by x-ray diffraction, Raman spectroscopy and x-ray photoelectron spectroscopy to reveal the crystallographic details, stoichiometry, and electronic configuration, respectively. Furthermore, Co3O4 thin film electrode is used for pseudocapacitor and electrochemically tested in 1M aqueous KOH electrolyte solution, in addition, a symmetric supercapacitor (SS) device was fabricated. It was found that the SS device exhibits tremendous electrochemical stability in terms of high capacitance and good cycling stability. The value of specific capacitance for Co3O4 thin film electrodes and the SS device was calculated to be 392 Fg−1 and 95 Fg−1, respectively, at a scan rate of 2 mAcm−2. The SS device exhibits high specific energy (29 W-hkg−1) along with comparable good specific power (4745 Wkg−1). In this work, the fabricated SS device demonstrates 91.40% cyclic and capacitance retention at 8 mAcm−2 beyond 10 000 cycles. The excellent electrochemical stability and capacitive performance of the SS device suggest that it would be an ideal and potential candidate for energy storage applications in the future.

Enhanced Oxygen Evolution Electrocatalysis in Strained A-Site Cation Deficient LaNiO3 Perovskite Thin Films

As the BO₆ octahedral structure in perovskite oxide is strongly linked with electronic behavior, it is actively studied for various fields such as metal-insulator transition, superconductivity, and so on. However, the research about the relationship between water-splitting activity and BO₆ structure is largely lacking. Here, we report the oxygen evolution reaction (OER) of LaNiO₃ (LNO) by changing the NiO₆ structure using compositional change and strain. The 5 atom % La deficiency in LNO resulted in an increase of the Ni-O-Ni bond angle and an expansion of bandwidth, enhancing the charge transfer ability. In-plane compressive strain derives the higher d_z² orbital occupancy, leading to suitable metal-oxygen bond strength for OER. Because of the synergistic effect of A-site deficiency and compressive strain, the overpotential (η) of compressively strained L_0.95NO film is reduced to 130 mV at j = 30 μA/cm² compared with nonstrained LNO (η = 280 mV), indicating a significant enhancement in OER.

Phase transformation in tungsten oxide nanoplates as a function of post-annealing temperature and its electrochemical influence on energy storage

The morphology and crystal structure of electrode materials have an enormous impact on their electrochemical properties for employment in supercapacitors for various applications. In this study, the transformations of the crystal structure of WO₃·H₂O nanoplates were conducted by post-annealing at 200 °C and 400 °C. The morphological and structural evolution of the electrodes was studied via FEG-SEM, HRTEM, FTIR, XRD, and Raman spectroscopy. The phase transition and enhanced degree of crystallinity were observed with increasing temperature. The orthorhombic structures of the hydrate WO₃·H₂O (W80), the mixed-phase with mesoporous structure (W200), and finally the monoclinic phase of WO₃ structures (W400) were achieved at annealing temperatures of 80 °C, 200 °C, and 400 °C respectively. The electrochemical performance of electrode W200 showed the highest specific capacitance of 606 F g^-1 as compared to electrode W80 (361 F g^-1), and was two-fold greater than electrode W400 (302 F g^-1) at a current density of 1 A g^-1. Moreover, electrode W200 exhibited excellent cyclic stability of 89% at an ultrahigh scan rate of 100 mV s^-1 after 4000 cycles. The results highlight that the mixed-phase WO₃ nanoplates would make a suitable electrode material for supercapacitors with desired electrochemical features.

Electrodeposited Polyaniline Nanofibers and MoO3 Nanobelts for High-Performance Asymmetric Supercapacitor with Redox Active Electrolyte

Transition molybdenum oxides (MoO3) and conductive polymer (polyaniline, PANI) nanomaterials were fabricated and asymmetric supercapacitor (ASC) was assembled with MoO3 nanobelts as negative electrode and PANI nanofibers as a positive electrode. Branched PANI nanofibers with a diameter of 100 nm were electrodeposited on Ti mesh substrate and MoO3 nanobelts with width of 30-700 nm were obtained by the hydrothermal reaction method in an autoclave. Redox active electrolyte containing 0.1 M Fe2+/3+ redox couple was adopted in order to enhance the electrochemical performance of the electrode nano-materials. As a result, the PANI electrode shows a great capacitance of 3330 F g-1 at 1 A g-1 in 0.1 M Fe2+/3+/0.5 M H2SO4 electrolyte. The as-assembled ASC achieved a great energy density of 54 Wh kg-1 at power density of 900 W kg-1. In addition, it displayed significant cycle stability and its capacitance even increased to 109% of the original value after 1000 charge-discharge cycles. The superior performance of the capacitors indicates their promising application as energy storage devices.

Improvement of the Pseudocapacitive Performance of Cobalt Oxide-Based Electrodes for Electrochemical Capacitors

Cobalt oxide nanopowders are synthesized by the pyrolysis of aerosol particles of water solution of cobalt acetate. Cobalt nanopowder is obtained by subsequent reduction of obtained cobalt oxide by annealing under a hydrogen atmosphere. The average crystallite size of the synthesized porous particles ranged from 7 to 30 nm, depending on the synthesis temperature. The electrochemical characteristics of electrodes based on synthesized cobalt oxide and reduced cobalt oxide are investigated in an electrochemical cell using a 3.5 M KOH solution as the electrolyte. The results of electrochemical measurements show that the electrode based on reduced cobalt oxide (Re-Co3O4) exhibits significantly higher capacity, and lower Faradaic charge–transfer and ion diffusion resistances when compared to the electrodes based on the initial cobalt oxide Co3O4. This observed effect is mainly due to a wide range of reversible redox transitions such as Co(II) ↔ Co(III) and Co(III) ↔ Co(IV) associated with different cobalt oxide/hydroxide species formed on the surface of metal particles during the cell operation; the small thickness of the oxide/hydroxide layer providing a high reaction rate, and also the presence of a metal skeleton leading to a low series resistance of the electrode.

A porous graphene-NiFe2O4 nanocomposite with high electrochemical performance and high cycling stability for energy storage applications

It is well agreed that supercapacitors form an important class of energy storage devices catering to a variety of needs. However, designing the same using eco-friendly and earth abundant materials with high performance is still the dire need of the day. Here, we report a facile solvothermal synthesis of a porous graphene-NiFe₂O₄ (PGNF) nanocomposite. Thorough elemental, diffraction, microscopic and spectroscopic studies confirmed the formation of the PGNF composite, in which the NF nanoparticles are covered over the PG surface. The obtained 10 PGNF composite showed a surface area of 107 m² g^-1, with large pore volume which is favorable for charge storage properties. When utilizing the material as an electrode for a supercapacitor in a 2 M KOH aqueous electrolyte, the electrode displayed an impressive specific capacitance value of 1465.0 F g^-1 at a scan rate of 5 mV s^-1 along with a high capacitance retention of 94% after 10 000 discharge cycles. The fabricated symmetrical supercapacitor device exhibited an energy density of 4.0 W h kg^-1 and a power density of 3600.0 W kg^-1 at a high applied current density of 14 A g^-1. The superior electrochemical performance is attributed to the synergetic effect of the composite components which not only provided enough electroactive channels for the smooth passage of electrolyte ions but also maintained the hybrid structure intact in the ongoing electrochemical process. The obtained results underpin the promising utility of this material for future electrochemical energy storage devices.

Synthesis of Cu-Doped Mn3O4@Mn-Doped CuO Nanostructured Electrode Materials by a Solution Process for High-Performance Electrochemical Pseudocapacitors

Cu-doped Mn3O4 and Mn-doped CuO (CMO@MCO) mixed oxides with isolated phases together with pristine Mn3O4 (MO) and CuO (CO) have been synthesized by a simple solution process for applications in electrochemical supercapacitors. The crystallographic, spectroscopic, and morphological analyses revealed the formation of all of the materials with good crystallinity and purity with the creation of rhombohedral-shaped MO and CMO and a mixture of spherical and rod-shaped CO and MCO nanostructures. The ratio of CMO and MCO in the optimized CMO@MCO was 2:1 with the Cu and Mn dopants percentages of 12 and 15%, respectively. The MO-, CO-, and CMO@MCO-modified carbon cloth (CC) electrodes delivered the specific capacitance (C s) values of 541.1, 706.7, and 997.2 F/g at 5 mV/s and 413.4, 480.5, and 561.1 F/g at 1.3 A/g, respectively. This enhanced C s value of CMO@MCO with an energy density and a power density of 78.0 Wh/kg and 650.0 W/kg, respectively, could be attributed to the improvement of electrical conductivity induced by the dopants and the high percentage of oxygen vacancies. This corroborated to a decrease in the optical band gap and charge-transfer resistance (R ct) of CMO@MCO at the electrode/electrolyte interface compared to those of MO and CO. The net enhancement of the Faradaic contribution induced by the redox reaction of the dopant and improved surface area was also responsible for the better electrochemical performance of CMO@MCO. The CMO@MCO/CC electrode showed high electrochemical stability with a C s loss of only ca. 4.7%. This research could open up new possibilities for the development of doped mixed oxides for high-performance supercapacitors.

Inkjet-Printing Technology for Supercapacitor Application: Current State and Perspectives

Inkjet-printing (IJP) technology is recognized as a significant breakthrough in manufacturing high-performance electrochemical energy storage systems. In comparison to conventional fabrication protocols, this printing technique offers various advantages, such as contact-less high-resolution patterning capability; low-cost, controlled material deposition; process simplicity; and compatibility with a variety of substrates. Due to these outstanding merits, significant research efforts have been devoted to utilizing IJP technology in developing electrochemical energy storage devices, particularly in supercapacitors (SCs). These attempts have focused on fabricating the key components of SCs, including electrode, electrolyte, and current collector, through rational formulation and patterning of functional inks. In an attempt to further expand the material design strategy and accelerate technology development, it is urgent and essential to obtain an in-depth insight into the recent developments of inkjet-printed SCs. Toward this aim, first, a general introduction to the fundamental principles of IJP technology is provided. After that, the latest achievements in IJP of capacitive energy storage devices are systematically summarized and discussed with a particular emphasis on the design of printable functional materials, the printing process, and capacitive performance of inkjet-printed SCs. To close, existing challenges and future research trends for developing state-of-the-art inkjet-printed SCs are proposed.

Carbon Transition-metal Oxide Electrodes: Understanding the Role of Surface Engineering for High Energy Density Supercapacitors

Supercapacitors store electrical energy by ion adsorption at the interface of the electrode-electrolyte (electric double layer capacitance, EDLC) or through faradaic process involving direct transfer of electrons via oxidation/reduction reactions at one electrode to the other (pseudocapacitance). The present minireview describes the recent developments and progress of carbon-transition metal oxides (C-TMO) hybrid materials that show great promise as an efficient electrode towards supercapacitors among various material types. The review describes the synthetic methods and electrode preparation techniques along with the changes in the physical and chemical properties of each component in the hybrid materials. The critical factors in deriving both EDLC and pseudocapacitance storage mechanisms are also identified in the hope of pointing to the successful hybrid design principles. For example, a robust carbon-metal oxide interaction was identified as most important in facilitating the charge transfer process and activating high energy storage mechanism, and thus methodologies to establish a strong carbon-metal oxide contact are discussed. Finally, this article concludes with suggestions for the future development of the fabrication of high-performance C-TMO hybrid supercapacitor electrodes.

A unique core-shell structured ZnO/NiO heterojunction to improve the performance of supercapacitors produced using a chemical bath deposition approach

The integration of metal oxide composite nanostructures has attracted great attention in supercapacitor (SC) applications. Herein, we fabricated a series of metal oxide composite nanostructures, including ZnO nanowires, NiO nanosheets, ZnO/CuO nanowire arrays, ZnO/FeO nanocrystals, ZnO/NiO nanosheets and ZnO/PbO nanotubes, via a simple and cost-effective chemical bath deposition (CBD) method. The electrochemical properties of the produced SCs were examined by performing cyclic voltammetry (CV), galvanostatic charge-discharge (GCD) analysis, and electrochemical impedance spectroscopy (EIS). Of the different metal oxides and metal oxide composites tested, the unique surface morphology of the ZnO/NiO nanosheets most effectively increased the electron transfer rate and electrical conductivity, which resulted in improved energy storage properties. The binder-free ZnO/NiO electrode delivered a high specific capacitance/capacity of 1248 F g-1 (599 mA h g-1) at 8 mA cm-2 and long-term cycling stability over the course of 3000 cycles with a capacity retention of 79%. These results suggested a superiority in performance of the ZnO/NiO nanosheets relative to the nanowires, nanowire arrays, nanocrystals, and nanotubes. Thus, the present work has provided an opportunity to fabricate new metal oxide composite nanostructures with high-performance energy storage devices.