Near infrared photothermal conversion materials: mechanism, preparation, and photothermal cancer therapy applications

Application of 3D printing technology in tumor diagnosis and treatment

3D printing technology is an increasing approach consisting of material manufacturing through the selective incremental delamination of materials to form a 3D structure to produce products. This technology has different advantages, including low cost, short time, diversification, and high precision. Widely adopted additive manufacturing technologies enable the creation of diagnostic tools and expand treatment options. Coupled with its rapid deployment, 3D printing is endowed with high customizability that enables users to build prototypes in shorts amounts of time which translates into faster adoption in the medical field. This review mainly summarizes the application of 3D printing technology in the diagnosis and treatment of cancer, including the challenges and the prospects combined with other technologies applied to the medical field.

Application of advanced biomaterials in photothermal therapy for malignant bone tumors

Malignant bone tumors are characterized by severe disability rate, mortality rate, and heavy recurrence rate owing to the complex pathogenesis and insidious disease progression, which seriously affect the terminal quality of patients' lives. Photothermal therapy (PTT) has emerged as an attractive adjunctive treatment offering prominent hyperthermal therapeutic effects to enhance the effectiveness of surgical treatment and avoid recurrence. Simultaneously, various advanced biomaterials with photothermal capacity are currently created to address malignant bone tumors, performing distinctive biological functions, including nanomaterials, bioceramics (BC), polymers, and hydrogels et al. Furthermore, PTT-related combination therapeutic strategies can provide more significant curative benefits by reducing drug toxicity, improving tumor-killing efficiency, stimulating anti-cancer immunity, and improving immune sensitivity relative to monotherapy, even in complex tumor microenvironments (TME). This review summarizes the current advanced biomaterials applicable in PTT and relevant combination therapies on malignant bone tumors for the first time. The multiple choices of advanced biomaterials, treatment methods, and new prospects for future research in treating malignant bone tumors with PTT are generalized to provide guidance. Malignant bone tumors seriously affect the terminal quality of patients' lives. Photothermal therapy (PTT) has emerged as an attractive adjunctive treatment enhancing the effectiveness of surgical treatment and avoiding recurrence. In this review, advanced biomaterials applicable in the PTT of malignant bone tumors and their distinctive biological functions are comprehensively summarized for the first time. Simultaneously, multiple PTT-related combination therapeutic strategies are classified to optimize practical clinical issues, contributing to the selection of biomaterials, therapeutic alternatives, and research perspectives for the adjuvant treatment of malignant bone tumors with PTT in the future.

Photothermal Conversion of Hydrogel-Based Biomaterial

Traditional energy from fossil fuels like petroleum and coal is limited and contributes to global environmental pollution and climate change. Developing sustainable and eco-friendly energy is crucial for addressing significant challenges such as climate change, energy dilemma and achieving the long-term development of human society. Biomass hydrogels, which are easily synthesized and modified, have diverse sources and can be designed for different applications. They are being extensively researched for their applications in artificial intelligence, flexible sensing, biomedicine, and food packaging. The article summarizes recent advances in the preparation and applications of biomass-based photothermal conversion hydrogels, discussing the light source, photothermal agents, matrix, and preparation methods in detail. It also explores the use of these hydrogels in seawater desalination, photothermal therapy, antibacterial agents, and light-activated materials, offering new ideas for developing sustainable, efficient, and advanced photothermal conversion biomass hydrogel materials. The article concludes with suggestions for future research, highlighting the challenges and prospects in this field and paving the way for developing of long-lasting, efficient energy materials.

Modular Drug-Loaded Nanocapsules with Metal Dome Layers as a Platform for Obtaining Synergistic Therapeutic Biological Activities

Multifunctional drug-loaded polymer-metal nanocapsules have attracted increasing attention in drug delivery due to their multifunctional potential endowed by drug activity and response to physicochemical stimuli. Current chemical synthesis methods of polymer/metal capsules require specific optimization of the different components to produce particles with precise properties, being particularly complex for Janus structures combining polymers and ferromagnetic and highly reactive metals. With the aim to generate tunable synergistic nanotherapeutic actuation with enhanced drug effects, here we demonstrate a versatile hybrid chemical/physical fabrication strategy to incorporate different functional metals with tailored magnetic, optical, or chemical properties on solid drug-loaded polymer nanoparticles. As archetypical examples, we present poly(lactic-co-glycolic acid) (PLGA) nanoparticles (diameters 100-150 nm) loaded with paclitaxel, indocyanine green, or erythromycin that are half-capped by either Fe, Au, or Cu layers, respectively, with application in three biomedical models. The Fe coating on paclitaxel-loaded nanocapsules permitted efficient magnetic enhancement of the cancer spheroid assembly, with 40% reduction of the cross-section area after 24 h, as well as a higher paclitaxel effect. In addition, the Fe-PLGA nanocapsules enabled external contactless manipulation of multicellular cancer spheroids with a speed of 150 μm/s. The Au-coated and indocyanine green-loaded nanocapsules demonstrated theranostic potential and enhanced anticancer activity in vitro and in vivo due to noninvasive fluorescence imaging with long penetration near-infrared (NIR) light and simultaneous photothermal-photodynamic actuation, showing a 3.5-fold reduction in the tumor volume growth with only 5 min of NIR illumination. Finally, the Cu-coated erythromycin-loaded nanocapsules exhibited enhanced antibacterial activity with a 2.5-fold reduction in the MIC50 concentration with respect to the free or encapsulated drug. Altogether, this technology can extend a nearly unlimited combination of metals, polymers, and drugs, thus enabling the integration of magnetic, optical, and electrochemical properties in drug-loaded nanoparticles to externally control and improve a wide range of biomedical applications.

Cascade strategy for glucose oxidase-based synergistic cancer therapy using nanomaterials

Nanomaterial-based cancer therapy faces significant limitations due to the complex nature of the tumor microenvironment (TME). Starvation therapy is an emerging therapeutic approach that targets tumor cell metabolism using glucose oxidase (GOx). Importantly, it can provide a material or environmental foundation for other diverse therapeutic methods by manipulating the properties of the TME, such as acidity, hydrogen peroxide (H2O2) levels, and hypoxia degree. In recent years, this cascade strategy has been extensively applied in nanoplatforms for ongoing synergetic therapy and still holds undeniable potential. However, only a few review articles comprehensively elucidate the rational designs of nanoplatforms for synergetic therapeutic regimens revolving around the conception of the cascade strategy. Therefore, this review focuses on innovative cascade strategies for GOx-based synergetic therapy from representative paradigms to state-of-the-art reports to provide an instructive, comprehensive, and insightful reference for readers. Thereafter, we discuss the remaining challenges and offer a critical perspective on the further advancement of GOx-facilitated cancer treatment toward clinical translation.

Nickel(II) Phototheranostics: A Case Study in Photoactivated H2O2-Enhanced Immunotherapy

Phototheranostics have emerged as a promising subset of cancer theranostics owing to their potential to provide precise photoinduced diagnoses and therapeutic outcomes. However, the design of phototheranostics remains challenging due to the nature of tumors and their microenvironment, including limitations to the oxygen supply, high rates of recurrence and metastasis, and the immunosuppressive state of cancer cells. Here we report a dual-functional oxygen-independent phototheranostic agent, Ni-2, rationally designed to provide a near-infrared (NIR) photoactivated thermal- and hydroxyl radical (•OH)-enhanced photoimmunotherapeutic anticancer response. Under 880 nm laser irradiation, Ni-2 exhibited high photostability and excellent photoacoustic and photothermal effects with a photothermal conversion efficacy of 58.0%, as well as novel photoredox features that allowed the catalytic conversion of H2O2 to •OH upon photooxidation of Ni(II) to Ni(III). As a multifunctional photoagent, Ni-2 was found not only to inhibit tumor growth in a CT26 tumor-bearing mouse model but also to activate an immune response via a combination of photothermal- and H2O2-induced effects. When combined with an antiprogrammed death-ligand 1 (aPD-L1), Ni-2 treatment allowed for the suppression of distant tumor growth and cancer metastasis. Collectively, the present results provide support for the proposition that Ni-2 or its analogues could emerge as useful tools for photoimmunotherapy. They also highlight the potential of appropriately designed 3d transition metal complexes as "all- in-one" phototheranostics.

Photothermally sensitive gold nanocage augments the antitumor efficiency of immune checkpoint blockade in immune "cold" tumors

Introduction

Immune checkpoint blockade (ICB) has revolutionized the therapy landscape of malignancy melanoma. However, the clinical benefits from this regimen remain limited, especially in tumors lacking infiltrated T cells (known as "cold" tumors). Nanoparticle-mediated photothermal therapy (PTT) has demonstrated improved outcomes in the ablation of solid tumors by inducing immunogenic cell death (ICD) and reshaping the tumor immune microenvironment. Therefore, the combination of PTT and ICB is a promising regimen for patients with "cold" tumors.

Methods

A second near-infrared (NIR-II) light-activated gold nanocomposite AuNC@SiO2@HA with AuNC as a kernel, silica as shell, and hyaluronic acid (HA) polymer as a targeting molecule, was synthesized for PTT. The fabricated AuNC@SiO2@HA nanocomposites underwent various in vitro studies to characterize their physicochemical properties, light absorption spectra, photothermal conversion ability, cellular uptake ability, and bioactivities. The synergistic effect of AuNC@SiO2@HA-mediated PTT and anti-PD-1 immunotherapy was evaluated using a mouse model of immune "cold" melanoma. The tumor-infiltrating T cells were assessed by immunofluorescence staining and flow cytometry. Furthermore, the mechanism of AuNC@SiO2@HA-induced T-cell infiltration was investigated through immunochemistry staining of the ICD-related markers, including HSP70, CRT, and HMGB1. Finally, the safety of AuNC@SiO2@HA nanocomposites was evaluated in vivo.

Results

The AuNC@SiO2@HA nanocomposite with absorption covering 1064 nm was successfully synthesized. The nano-system can be effectively delivered into tumor cells, transform the optical energy into thermal energy upon laser irradiation, and induce tumor cell apoptosis in vitro. In an in vivo mouse melanoma model, AuNC@SiO2@HA nanocomposites significantly induced ICD and T-cell infiltration. The combination of AuNC@SiO2@HA and anti-PD-1 antibody synergistically inhibited tumor growth via stimulating robust T lymphocyte immune responses.

Discussion

The combination of AuNC@SiO2@HA-mediated PTT and anti-PD-1 immunotherapy proposed a neoteric strategy for oncotherapy, which efficiently convert the immune "cold" tumors into "hot" ones.

Preparation and performance of a stimuli-responsive drug delivery system: novel light-triggered temperature-sensitive drug-loaded microcapsules

Stimuli-responsive/smart drug delivery systems (DDSs), particularly those that use temperature as a stimuli-response factor to activate drug release, are the subject of recent research. A phase change material (PCM) is a popular thermally responsive material that can be used as a drug carrier and only when the system temperature is above the phase change point is the drug released following the phase change material changing from solid to liquid. In this study, a novel NIR light-triggered temperature-sensitive drug delivery system is developed for controllable release of acyclovir (ACV). For this purpose, a mixture of a phase change material (T38) and an ACV compound is first emulsified with copper oxide nanoparticles (CuO NPs) as a Pickering stabilizer and a photothermal conversion material, and then encapsulated with SiO2 to form a photothermal stimuli-responsive delivery system. This system shows a uniform spherical shape with a well-distinct core-shell structure, and is further experimentally proven to be able to controllably release drugs with solid-liquid transition of the phase change carrier upon temperature change. These results indicate that cumulative release of ACV can reach 51.2% at 40 °C within 20 hours, which is much higher than 27.3% release achieved below the melting point of T38. In addition, CuO NPs with excellent photothermal conversion ability endow the system with precisely controllable drug delivery via NIR light stimulation, where the cumulative drug release can reach 83.6% after 7 cycles of light stimulation, allowing controlled release at a specific time or location.

Stable polyethylene glycol/biochar composite as a cost-effective photothermal absorber for 24 hours of steam and electricity cogeneration

Seawater desalination powered by solar energy is the most environmentally and economical solution in responding to the global water and energy crisis. However, solar desalination has been negatively impacted by intermittent sun radiation that alternates between day and night. In this study, sugarcane bagasse (SCB) was recycled via the pyrolysis process to biochar as a cost-effective solar absorber. Besides, polyethylene glycol (PEG) as a phase change material was encapsulated in the abundant pore structure of biochar to store the thermal energy for 24 hours of continuous steam generation. The BDB/1.5 PEG evaporator exhibited an evaporation rate of 2.11 kg m-2 h-1 (98.1% efficiency) under 1 sun irradiation. Additionally, the BDB/1.5 PEG evaporator incorporated by the TEC1-12706 module for continuous steam and electricity generation with a power density of 320.41 mW m-2. Moreover, 10 continuous hours of evaporation were applied to the composite demonstrating outstanding stability. The composite exhibited high water purification efficiency through solar desalination due to the abundant functional groups on the biochar surface. Finally, the resulting low-cost and highly efficient PCM-based absorber can be used on a wide scale to produce fresh water and energy.

77 % Photothermal Conversion in Blatter-Type Diradicals: Photophysics and Photodynamic Applications

Diradicals based on the Blatter units and connected by acetylene and alkene spacers have been prepared. All the molecules show sizably large diradical character and low energy singlet-triplet gaps. Their photo-physical properties concerning their lowest energy excited state have been studied in detail by steady-state and time-resolved absorption spectroscopy. We have fully identified the main optical absorption band and full absence of emission from the lowest energy excited state. A computational study has been also carried out that has helped to identify the presence of a conical intersection between the lowest energy excited state and the ground state which produces a highly efficient light-to-heat conversion of the absorbed radiation. Furthermore, an outstanding photo-thermal conversion 77.23 % has been confirmed, close to the highest in the diradicaloid field. For the first time, stable diradicals are applied to photo-thermal therapy of tumor cells with good stability and satisfactory performance at near-infrared region.

Injectable biocompatible nanocomposites of Prussian blue nanoparticles and bacterial cellulose as a safe and effective photothermal cancer therapy

Photothermal therapy (PTT) is a novel cancer treatment using a photoabsorber to cause hyperthermia to kill tumors by laser irradiation. Prussian blue nanoparticles (PB NPs) are considered as next-generation photothermal agents due to the facile synthesis and excellent absorption of near-infrared light. Although PB NPs demonstrate remarkable PTT capabilities, their clinical application is limited due to their systemic toxicity. Bacterial cellulose (BC) has been applied to various bio-applications based on its unique properties and biocompatibility. Herein, we design composites with PB NPs and BC as an injectable, highly biocompatible PTT agent (IBC-PB composites). Injectable bacterial cellulose (IBC) is produced through the trituration of BC, with PB NPs synthesized on the IBC surface to prepare IBC-PB composites. IBC-PB composites show in vitro and in vivo photothermal therapeutic effects similar to those of PB NPs but with significantly greater biocompatibility. Specifically, in vitro therapeutic index of IBC-PB composites is 26.5-fold higher than that of PB NPs. Furthermore, unlike PB NPs, IBC-PB composites exhibit no overt toxicity in mice as assessed by blood biochemical analysis and histological images. Hence, it is worth pursuing further research and development of IBC-PB composites as they hold promise as safe and efficacious PTT agents for clinical application.

Isoindigo-Based Dual-Acceptor Conjugated Polymers Incorporated Conjugation Length and Intramolecular Charge Transfer for High-Efficient Photothermal Conversion

Photothermal tumor therapy (PTT) and photoacoustic imaging (PA) have emerged as promising noninvasive diagnostic and therapeutic approaches for cancer treatment. However, the development of efficient PTT agents with high photostability and strong near-infrared (NIR) absorption remains challenging. This study synthesizes three isoindigo-based dual-acceptor conjugated polymers (CPs) (P-IIG-TPD, P-IIG-DPP, and P-IIG-EDOT-BT) via a green and nontoxic direct arylation polymerization (DArP) method and characterizes their optical, electrochemical, and NIR photothermal conversion properties. By incorporating two acceptors into the backbone, the resulting polymers exhibit enhanced photothermal conversion efficiency (PCE) due to improved synergy among conjugation length, planarity, and intramolecular charge transfer (ICT). The nanoparticles (NPs) of P-IIG-EDOT-BT and P-IIG-DPP have a uniform size distribution around 140 nm and exhibit remarkable NIR absorption at 808 nm. In addition, P-IIG-EDOT-BT and P-IIG-DPP NPs exhibit high PCEs of 62% and 78%, respectively. This study promotes the molecular design of CPs as NIR photothermal conversion materials and provides guidance for the development of novel dual-acceptor CPs for tumor diagnosis and treatment.

Carbon Quantum Dots with High Photothermal Conversion Efficiency and Their Application in Photothermal Modulated Reversible Deformation of Poly(N-isopropylacrylamide) Hydrogel

The fluorescence of carbon quantum dots (CQDs) has been paid a lot of attention, but its photothermal performance attracts less attention since preparing CQDs with high photothermal conversion efficiency (PCE) is a big challenge. In this work, CQDs with an average size of 2.3 nm and a PCE of up to 59.4% under 650 nm laser irradiation were synthesized by a simple one-pot microwave-assisted solvothermal method using citric acid (CA) and urea (UR) as the precursors and N,N-dimethylformamide as the solvent under an optimized condition (CA/UR = 1/7, 150 °C, and 1 h). The as-prepared CQDs were demonstrated to have unique surface chemical states; i.e., abundant pyrrole, amide, carboxyl, and hydroxyl groups were found on the surfaces of CQDs, which ensure a high PCE. These CQDs were introduced into a thermoresponsive poly(N-isopropylacrylamide) (PNIPAM) to form a CQDs@PNIPAM nanocomposite, and then, a bilayer hydrogel composed of CQDs@PNIPAM and polyacrylamide (PAM) was fabricated. The bilayer hydrogel can be reversibly deformed just by a light switching on/off operation. Based on the excellent photothermal performance, the developed CQDs are expected to be used in photothermal therapy, photoacoustic imaging, and other biomedical fields, and the CQDs@PNIPAM hydrogel nanocomposite is promising to be applied in intelligent device systems as a light-driven smart flexible material.

Second-Generation Soft Actuators Driven by NIR Light Based on Croconaine Dye-Doped Vitrimers

Soft actuators with photo-response can be selectively driven by the light source, but it is challenging to achieve a selective response of multiple components under a uniform light field, which is actually of great importance for the development of soft robots. In this work, a series of near-infrared light (NIR)-responsive vitrimers (CR-vitrimers) are synthesized by carboxylate transesterification using carboxyl-bearing croconaine dye (CR-800) as a photothermal agent (PTA). NIR-responsive liquid crystalline elastomers (CR-vitrimer-LCEs) under NIR laser (λmax = 808 nm) without the template can be further prepared. More importantly, the dynamic covalent bonding properties of vitrimer allow for the fabrication of a hand-shaped actuator by hot pressing, consisting of "fingers" with different NIR-response threshold values. After programming as needed, the hand-shaped actuator successfully achieves local and sequential control under a uniform NIR light field.

Near-infrared active ferrocenyl porous organic polymer with photothermal enhanced enzymatic activity for combination antibacterial application

As a severe ongoing global problem, bacterial contamination exists in every aspect of human life and the search for new antibacterial agents is urgently needed. Herein, a ferrocenyl porous organic polymer (FMC-POP) broad-spectrum antibacterial agent based on synergistic photothermal and peroxidase-like activity was prepared in a facile manner via the copolymerization of ferrocene diformaldehyde and cinnamaldehyde with mannitol through the acid-responsive acetal bond. The photoactive FMC-POP, with high photothermal conversion efficiency (41.45%), could convert not only the near-infrared laser irradiation into local heat to eradicate bacteria, but also low-concentration H2O2 into radical oxygen species (˙OH) that are effective against bacteria. Compared with single-mode photothermal (PTT) and enzymatic therapies, this combination therapy could significantly improve the bactericidal effect, exhibiting a germicidal efficiency of up to 99% (vs. 80.42% for PTT and 70% for enzyme). Thus, our work paves the way for a synergistic non-invasive antimicrobial therapy, which could expand the applications of POP-based artificial enzymes in biomedicine.

Translational screening platform to evaluate chemotherapy in combination with focal therapy for retinoblastoma

Retinoblastoma is the most common pediatric eye cancer. It is currently treated with a limited number of drugs, adapted from other pediatric cancer treatments. Drug toxicity and relapse of the disease warrant new therapeutic strategies for these young patients. In this study, we developed a robust tumoroid-based platform to test chemotherapeutic agents in combination with focal therapy (thermotherapy) - a treatment option widely used in clinical practice - in accordance with clinically relevant trial protocols. The model consists of matrix-embedded tumoroids that retain retinoblastoma features and respond to repeated chemotherapeutic drug exposure similarly to advanced clinical cases. Moreover, the screening platform includes a diode laser (810 nm, 0.3 W) to selectively heat the tumoroids, combined with an on-line system to monitor the intratumoral and surrounding temperatures. This allows the reproduction of the clinical settings of thermotherapy and combined chemothermotherapy treatments. When testing the two main drugs currently used in clinics to treat retinoblastoma in our model, we observed results similar to those clinically obtained, validating the utility of the model. This screening platform is the first system to accurately reproduce clinically relevant treatment methods and should lead to the identification of more efficient drugs to treat retinoblastoma.

Multifunctional CuFe2O4@HA as a GSH-depleting nanoplatform for targeted photothermal/enhanced-chemodynamic synergistic therapy

Chemodynamic therapy (CDT), which converts overexpressed hydrogen peroxide (H2O2) in tumor cells to hydroxyl radicals (•OH) by Fenton reactions, is considered a prospective strategy in anticancer therapy. However, the high level of glutathione (GSH) and poor Fenton catalytic efficiency contribute to the suboptimal efficiency of CDT. Herein, we present a multifunctional nanoplatform (CuFe2O4@HA) that can induce GSH depletion and combine with photothermal therapy (PTT) to enhance antitumor efficacy. CuFe2O4@HA nanoparticles could release Cu2+ and Fe3+ after entering tumor cells by targeting hyaluronic acid (HA). Subsequently, Cu2+ and Fe3+ were reduced to Cu+ and Fe2+ by GSH, where Cu+/Fe2+ significantly catalyzed H2O2 to produce a higher level of •OH, and the depletion of GSH disrupted the antioxidant capacity of the tumor. Therefore, depleting GSH substantially enhances the level of •OH in tumor cells. In addition, CuFe2O4@HA nanoparticles have considerable absorption in the near-infrared (NIR) region, which can stimulate excellent PTT effects. More importantly, the heat generated by PTT can further enhance the Fenton catalysis efficiency. In vitro and in vivo experiments have demonstrated the excellent tumor-killing effect of CuFe2O4@HA nanoparticles. This strategy overcomes the problem of insufficient CDT efficacy caused by GSH overexpression and poor catalytic efficiency. Moreover, this versatile nanoplatform provides a reference for self-enhanced CDT and PTT/CDT synergistic targeted therapy.

Bio-inspired self-assembled bacteriochlorin nanoparticles for superior visualization and photothermal ablation of tumors

BACKGROUND

Although hyperthermia-based photothermal therapy (PTT) has achieved great success in the battle against malignant tumors, various commonly used photothermal sensitizers still suffer from non-selective tumor accumulation, limited photothermal conversion efficiency, potential toxicity and side effects, as well as complex and low cost-effective preparation process. Therefore, novel photothermal sensitizers are urgently required. The well-organized self-assembling of natural bacteriochlorophylls with superior photothermal property may provide an interesting option for the engineering of ideal PTS.

METHODS

Inspired by the self-assembly peripheral light-harvesting antennas of natural bacteriochlorin in microorganisms, a biomimetic light-harvesting nanosystem (Nano-Bc) was developed via bacteriochlorophylls self-arranging in aqueous phase. The characterization of Nano-Bc were measured using DLS, TEM, UV-vis-near-infrared spectroscopy and preclinical PA imaging system. The cytotoxicity of Nano-Bc was quantitatively evaluated via a standard MTT assay using mouse breast cancer 4T1 cells, and the in vivo photothermal eradication of tumor was investigated in the 4T1 breast tumor-bearing mouse model.

RESULTS

The obtained bacteriochlorin nanoparticles (Nano-Bc) exhibited ultra-high photothermal performance within the biological transparent window, showing superior heating capacity compared to commonly used photothermal sensitizers of organic dye indocyanine green and inorganic gold nanorods. Guiding by the inherent photoacoustic imaging of Nano-Bc, complete tumor elimination in vitro and vivo was evidenced upon laser irradiation.

CONCLUSION

The green and facile preparation, ultra-high photothermal effect in the transparent window, excellent photoacoustic imaging capacity, and great biosafety prompt, the bio-inspired Nano-Bc as a promising theranostic platform against cancer in the areas of healthcare.

Nickel sulfide and dysprosium-doped nickel sulfide nanoparticles: Dysprosium-induced variation in properties, in vitro chemo-photothermal behavior, and antibacterial activity

Newer materials for utilization in multi-directional therapeutic actions are investigated, considering delicate design principles involving size and shape control, surface modification, and controllable drug loading and release. Multi-faceted properties are imparted to the engineered nanoparticles, like magnetism, near-infrared absorption, photothermal efficiency, and suitable size and shape. This report presents nickel sulfide and dysprosium-doped nickel sulfide nanoparticles with poly-β-cyclodextrin polymer coating. The nanoparticles belong to the orthorhombic crystal systems, as indicated by X-ray diffraction studies. The size and shape of the nanoparticles are investigated using Transmission Electron Microscope (TEM) and a particle-size analyzer. The particles show soft ferromagnetic characteristics with definite and moderate saturation magnetization values. The nickel sulfide nanoparticles' in vitro anticancer and antibacterial activities are investigated in free and 5-fluorouracil/penicillin benzathine-loaded forms. The 5-fluorouracil-encapsulation efficiency of the nanoparticles is around 87%, whereas it is above 92% in the case of penicillin benzathine. Both drugs are released slowly in a controlled fashion. The dysprosium-doped nickel sulfide nanoparticles show better anticancer activity, and the efficacy is more significant than the free drug. The nanoparticles are irradiated with a low-power 808 nm laser. The dysprosium-doped nickel sulfide nanoparticles attain a higher temperature on irradiation, i.e., above 59 °C. The photothermal conversion efficiency of this material is determined, and the significance of dysprosium doping is discussed. Contrarily, the undoped nickel sulfide nanoparticles show more significant antibacterial activity. This study presents a novel designed nanoparticle system and the exciting variation of properties on dysprosium doping in nickel sulfide nanoparticles.

Aqueous green synthesis of organic/inorganic nanohybrids with an unprecedented synergistic mechanism for enhanced near-infrared photothermal performance

Silver sulfide (Ag2S) nanoparticles (NPs) represent one of the most popular inorganic reagents for near-infrared (NIR) photothermal therapy (PTT). However, the extensive biomedical applications of Ag2S NPs are greatly compromised by the hydrophobicity of the NPs prepared in organic solvents, their low photothermal conversion efficiency, certain surface modification-induced damage to their intrinsic properties and short circulation time. To develop a facile yet efficient green approach to overcome these shortcomings for improved properties and performance of Ag2S NPs, we report herein the construction of Ag2S@polydopamine (PDA) nanohybrids via a "one-pot" organic-inorganic hybridization strategy, which produces uniform Ag2S@PDA nanohybrids with well-modulated sizes in the range of 100-300 nm via the self-polymerization of dopamine (DA) and subsequent synergistic assembly of PDA with Ag2S NPs in a three-phase mixed medium containing water, ethanol and trimethylbenzene (TMB). Integration of dual photothermal moieties, i.e., Ag2S and PDA at a molecular level, endows Ag2S@PDA nanohybrids with synergistically enhanced NIR photothermal properties that are much better than those of either PDA or Ag2S NPs due to calculated combination indexes (CIs) of 0.3-0.7 between Ag2S NPs and PDA based on a modified Chou-Talalay method. Therefore, this study not only developed a facile "one-pot" green approach toward producing uniform Ag2S@PDA nanohybrids with well-modulated dimensions, but also revealed an unprecedented synergistic mechanism for organic/inorganic nanohybrids that is based on dual photothermal moieties providing enhanced near-infrared photothermal performance.

Cancer phototherapy with nano-bacteria biohybrids

The utilization of light for therapeutic interventions, also known as phototherapy, has been extensively employed in the treatment of a wide range of illnesses, including cancer. Despite the benefits of its non-invasive nature, phototherapy still faces challenges pertaining to the delivery of phototherapeutic agents, phototoxicity, and light delivery. The incorporation of nanomaterials and bacteria in phototherapy has emerged as a promising approach that leverages the unique properties of each component. The resulting nano-bacteria biohybrids exhibit enhanced therapeutic efficacy when compared to either component individually. In this review, we summarize and discuss the various strategies for assembling nano-bacteria biohybrids and their applications in phototherapy. We provide a comprehensive overview of the properties and functionalities of nanomaterials and cells in the biohybrids. Notably, we highlight the roles of bacteria beyond their function as drug vehicles, particularly their capacity to produce bioactive molecules. Despite being in its early stage, the integration of photoelectric nanomaterials and genetically engineered bacteria holds promise as an effective biosystem for antitumor phototherapy. The utilization of nano-bacteria biohybrids in phototherapy is a promising avenue for future investigation, with the potential to enhance treatment outcomes for cancer patients.

Choline phosphate lipid-hitchhiked near-infrared BODIPY nanoparticles for enhanced phototheranostics

Phototheranostics integrating optical imaging and phototherapy has attracted extensive attention. Achieving nanophototherapeutics with near infrared (NIR)-light synchronously triggered photodynamic therapy (PDT) and photothermal therapy (PTT) is challenging. Herein, we develop a multifunctional theranostic nanoplatform prepared from the co-assembly of NIR boron dipyrromethene (BODIPY) with a cooperative D-π-A structure of a thiophene-BODIPY core and benzene-diethylamino, and a choline phosphate lipid. The as-fabricated nanoparticles (DBNPs) exhibited desirable NIR absorption, uniform spherical morphology and good colloidal stability. The elaborate molecular design and supramolecular assembly endowed DBNPs with desirable PDT and PTT activities. Upon 808 nm laser irradiation, the DBNPs efficiently generated active singlet oxygen and regional hyperpyrexia, with a photothermal conversion efficiency of 37.6%. The excellent PDT and PTT performance of DBNPs boosted the potent in vitro and in vivo anti-tumor effects. In addition, these nanoparticles manifested their good capability of NIR fluorescence imaging of tumors. Overall, the DBNPs provide a paradigm for delivering hydrophobic phototherapy molecules with phospholipids for enhanced tumor treatment and imaging.

Acceptor Engineering Produces Ultrafast Nonradiative Decay in NIR-II Aza-BODIPY Nanoparticles for Efficient Osteosarcoma Photothermal Therapy via Concurrent Apoptosis and Pyroptosis

Small-molecule photothermal agents (PTAs) with intense second near-infrared (NIR-II, 1,000 to 1,700 nm) absorption and high photothermal conversion efficiencies (PCEs) are promising candidates for treating deep-seated tumors such as osteosarcoma. To date, the development of small-molecule NIR-II PTAs has largely relied on fabricating donor-acceptor-donor (D-A-D/D') structures and limited success has been achieved. Herein, through acceptor engineering, a donor-acceptor-acceptor (D-A-A')-structured NIR-II aza-boron-dipyrromethene (aza-BODIPY) PTA (SW8) was readily developed for the 1,064-nm laser-mediated phototheranostic treatment of osteosarcoma. Changing the donor groups to acceptor groups produced remarkable red-shifts of absorption maximums from first near-infrared (NIR-I) regions (~808 nm) to NIR-II ones (~1,064 nm) for aza-BODIPYs (SW1 to SW8). Furthermore, SW8 self-assembled into nanoparticles (SW8@NPs) with intense NIR-II absorption and an ultrahigh PCE (75%, 1,064 nm). This ultrahigh PCE primarily originated from an additional nonradiative decay pathway, which showed a 100-fold enhanced decay rate compared to that shown by conventional pathways such as internal conversion and vibrational relaxation. Eventually, SW8@NPs performed highly efficient 1,064-nm laser-mediated NIR-II photothermal therapy of osteosarcoma via concurrent apoptosis and pyroptosis. This work not only illustrates a remote approach for treating deep-seated tumors with high spatiotemporal control but also provides a new strategy for building high-performance small-molecule NIR-II PTAs.

Recent progress of 4D printing in cancer therapeutics studies

Cancer is a critical cause of global human death. Not only are complex approaches to cancer prognosis, accurate diagnosis, and efficient therapeutics concerned, but post-treatments like postsurgical or chemotherapeutical effects are also followed up. The four-dimensional (4D) printing technique has gained attention for its potential applications in cancer therapeutics. It is the next generation of the three-dimensional (3D) printing technique, which facilitates the advanced fabrication of dynamic constructs like programmable shapes, controllable locomotion, and on-demand functions. As is well-known, it is still in the initial stage of cancer applications and requires the insight study of 4D printing. Herein, we present the first effort to report on 4D printing technology in cancer therapeutics. This review will illustrate the mechanisms used to induce the dynamic constructs of 4D printing in cancer management. The recent potential applications of 4D printing in cancer therapeutics will be further detailed, and future perspectives and conclusions will finally be proposed.

Light-initiated aggregation of gold nanoparticles for synergistic chemo-photothermal tumor therapy

The combination of chemotherapy with photothermal therapy (PTT) has attracted extensive attention due to its excellent synergetic effect attributing to the fact that hyperthermia can effectively promote the tumor uptake of chemotherapeutic drugs. Herein, we propose a light-initiated gold nanoparticle (AuNP) aggregation boosting the uptake of chemotherapeutic drugs for enhanced chemo-photothermal tumor therapy. Novel light-responsive AuNPs (tm-AuNPs) were rationally designed and fabricated by conjugating both 2,5-diphenyltetrazole (Tz) and methacrylic acid (Ma) onto the surface of AuNPs with small size (∼20 nm). Upon the irradiation of 405 nm laser, AuNPs could be initiated to form aggregates specifically within tumors through the covalent cycloaddition reaction between Tz and Ma. Taking advantage of the controllable photothermal effect of Au aggregates under NIR excitation, improved enrichment of doxorubicin (DOX) in tumor tissues was realized, combined with PTT, resulting in outstanding synergetic anti-tumor efficacy in living mice. We thus believe that this light-initiated AuNP aggregation approach would offer a valuable and powerful tool for precisely synergistic chemo-photothermal tumor therapy.

Nanotechnology-based photo-immunotherapy: a new hope for inhibition of melanoma growth and metastasis

Melanoma is the most aggressive form of skin cancer and there is a need for the development of effective anti-melanoma therapies as it shows high metastatic ability and low response rate. In addition, it has been identified that traditional phototherapy could trigger immunogenic cell death (ICD) to activate antitumor immune response, which could not only effectively arrest primary tumor growth, but also exhibit superior effects in terms of anti-metastasis, anti-recurrence for metastatic melanoma treatment However, the limited tumor accumulation of photosensitizers/photothermal agents and immunosuppressive tumor microenvironment severely weaken the immune effects. The application of nanotechnology facilitates a higher accumulation of photosensitizers/photothermal agents at the tumor site, which can thus improve the antitumor effects of photo-immunotherapy (PIT). In this review, we summarize the basic principles of nanotechnology-based PIT and highlight novel nanotechnologies that are expected to enhance the antitumor immune response for improved therapeutic efficacy.

Biocompatible Calcium Ion-Doped Magnesium Ferrite Nanoparticles as a New Family of Photothermal Therapeutic Materials for Cancer Treatment

Novel biocompatible and efficient photothermal (PT) therapeutic materials for cancer treatment have recently garnered significant attention, owing to their effective ablation of cancer cells, minimal invasiveness, quick recovery, and minimal damage to healthy cells. In this study, we designed and developed calcium ion-doped magnesium ferrite nanoparticles (Ca²⁺-doped MgFe₂O₄ NPs) as novel and effective PT therapeutic materials for cancer treatment, owing to their good biocompatibility, biosafety, high near-infrared (NIR) absorption, easy localization, short treatment period, remote controllability, high efficiency, and high specificity. The studied Ca²⁺-doped MgFe₂O₄ NPs exhibited a uniform spherical morphology with particle sizes of 14.24 ± 1.32 nm and a strong PT conversion efficiency (30.12%), making them promising for cancer photothermal therapy (PTT). In vitro experiments showed that Ca²⁺-doped MgFe₂O₄ NPs had no significant cytotoxic effects on non-laser-irradiated MDA-MB-231 cells, confirming that Ca²⁺-doped MgFe₂O₄ NPs exhibited high biocompatibility. More interestingly, Ca²⁺-doped MgFe₂O₄ NPs exhibited superior cytotoxicity to laser-irradiated MDA-MB-231 cells, inducing significant cell death. Our study proposes novel, safe, high-efficiency, and biocompatible PT therapeutics for treating cancers, opening new vistas for the future development of cancer PTT.

Nanomaterials for photothermal cancer therapy

Cancer has emerged as a pressing global public health issue, and improving the effectiveness of cancer treatment remains one of the foremost challenges of modern medicine. The primary clinical methods of treating cancer, including surgery, chemotherapy and radiotherapy, inevitably result in some adverse effects on the body. However, the advent of photothermal therapy offers an alternative route for cancer treatment. Photothermal therapy relies on photothermal agents with photothermal conversion capability to eliminate tumors at high temperatures, which offers advantages of high precision and low toxicity. As nanomaterials increasingly play a pivotal role in tumor prevention and treatment, nanomaterial-based photothermal therapy has gained significant attention owing to its superior photothermal properties and tumor-killing abilities. In this review, we briefly summarize and introduce the applications of common organic photothermal conversion materials (e.g., cyanine-based nanomaterials, porphyrin-based nanomaterials, polymer-based nanomaterials, etc.) and inorganic photothermal conversion materials (e.g., noble metal nanomaterials, carbon-based nanomaterials, etc.) in tumor photothermal therapy in recent years. Finally, the problems of photothermal nanomaterials in antitumour therapy applications are discussed. It is believed that nanomaterial-based photothermal therapy will have good application prospects in tumor treatment in the future.

Visualization of Phototherapy Evolution by Optical Imaging

Phototherapy, including photodynamic therapy (PDT) and photothermal therapy (PTT), is a non-invasive and effective approach used for cancer treatment, in which phototherapeutic agents are irradiated with an appropriate light source to produce cytotoxic reactive oxygen species (ROS) or heat to ablate cancer cells. Unfortunately, traditional phototherapy lacks a facile imaging method to monitor the therapeutic process and efficiency in real time, usually leading to severe side effects due to high levels of ROS and hyperthermia. To realize precise cancer treatment methods, it is highly desired to develop phototherapeutic agents possessing an imaging ability to evaluate the therapeutic process and efficacy in real time during cancer phototherapy. Recently, a series of self-reporting phototherapeutic agents were reported to monitor PDT and PTT processes by combining optical imaging technologies with phototherapy. Due to the real-time feedback provided by optical imaging technology, therapeutic responses or dynamic changes in the tumor microenvironment could be evaluated in a timely manner, thereby achieving personalized precision treatment and minimizing toxic side effects. In this review, we focus on the advances in the development of self-reporting phototherapeutic agents for a cancer phototherapy evaluation based on optical imaging technology to realize precision cancer treatments. Additionally, we propose the current challenges and future directions of self-reporting agents for precision medicine.

Nanoparticles-based phototherapy systems for cancer treatment: Current status and clinical potential

Remarkable progress in phototherapy has been made in recent decades, due to its non-invasiveness and instant therapeutic efficacy. In addition, with the rapid development of nanoscience and nanotechnology, phototherapy systems based on nanoparticles or nanocomposites also evolved as an emerging hotspot in nanomedicine research, especially in cancer. In this review, first we briefly introduce the history of phototherapy, and the mechanisms of phototherapy in cancer treatment. Then, we summarize the representative development over the past three to five years in nanoparticle-based phototherapy and highlight the design of the innovative nanoparticles thereof. Finally, we discuss the feasibility and the potential of the nanoparticle-based phototherapy systems in clinical anticancer therapeutic applications, aiming to predict future research directions in this field. Our review is a tutorial work, aiming at providing useful insights to researchers in the field of nanotechnology, nanoscience and cancer.

Recent Developments in Nanoparticle-Based Photo-Immunotherapy for Cancer Treatment

Phototherapy is an emerging approach for cancer treatment that is effective at controlling the growth of primary tumors. In the presence of light irradiation, photothermal and photodynamic agents that are delivered to tumor sites can induce local hyperthermia and the production of reactive oxygen species, respectively, that directly eradicate cancer cells. Nanoparticles, characterized by their small size and tunable physiochemical properties, have been widely utilized as carriers for phototherapeutic agents to improve their biocompatibility and tumor-targeted delivery. Nanocarriers can also be used to implement various codelivery strategies for further enhancing phototherapeutic efficiency. More recently, there has been considerable interest in augmenting the immunological effects of nanoparticle-based phototherapies, which can yield durable and systemic antitumor responses. This review provides an overview of recent developments in using nanoparticle technology to achieve photo-immunotherapy.

Recent applications of phase-change materials in tumor therapy and theranostics

Phase-change materials (PCMs) are a type of special material which can store and release a large amount of thermal energy without any significant temperature change. They are emerging in recent years as a promising functional material in tumor therapy and theranostics due to their accurate responses to the temperature variations, biocompatibility and low toxicity. In this review, we will introduce the main types of PCMs and their desirable physiochemical properties for biomedical applications, and highlight the recent progress of PCM's applications in the modulated release of antitumor drugs, with special attentions paid to various ways to initiate temperature-dependent phase change, the concomitant thermal therapy and its combination with or activation of other therapies, particularly unconventional therapies. We will also summarize PCM's recent applications in tumor theranostics, where both drugs and imaging probes are delivered by PCMs for controlled drug release and imaging-guided therapy. Finally, the future perspectives and potential limitations of harnessing PCMs in tumor therapy will be discussed.

Organic Photothermal Cocrystals: Rational Design, Controlled Synthesis, and Advanced Application

Organic photothermal cocrystals, integrating the advantages of intrinsic organic cocrystals and the fascinating photothermal conversion ability, hold attracted considerable interest in both basic science and practical applications, involving photoacoustic imaging, seawater desalination, and photothermal therapy, and so on. However, these organic photothermal cocrystals currently suffer individual cases discovered step by step, as well as the deep and systemic investigation in the corresponding photothermal conversion mechanisms is rarely carried out, suggesting a huge challenge for their further developments. Therefore, it is urgently necessary to investigate and explore the rational design and synthesis of high-performance organic photothermal cocrystals for future applications. This review first and systematically summarizes the organic photothermal cocrystal in terms of molecular classification, the photothermal conversion mechanism, and their corresponding applications. The timely interpretation of the cocrystal photothermal effect will provide broad prospects for the purposeful fabrication of excellent organic photothermal cocrystals toward great efficiency, low cost, and multifunctionality.

Friends against the Foe: Synergistic Photothermal and Photodynamic Therapy against Bacterial Infections

Multidrug-resistant (MDR) bacteria are rapidly emerging, coupled with the failure of current antibiotic therapy; thus, new alternatives for effectively treating infections caused by MDR bacteria are required. Hyperthermia-mediated photothermal therapy (PTT) and reactive oxygen species (ROS)-mediated photodynamic therapy (PDT) have attracted extensive attention as antibacterial therapies owing to advantages such as low invasiveness, low toxicity, and low likelihood of causing bacterial resistance. However, both strategies have notable drawbacks, including the high temperature requirements of PTT and the weak ability of PDT-derived ROS to penetrate target cells. To overcome these limitations, a combination of PTT and PDT has been used against MDR bacteria. In this review, we discuss the unique benefits and limitations of PTT and PDT against MDR bacteria. The mechanisms underlying the synergistic effects of the PTT–PDT combination are also discussed. Furthermore, we introduced advancements in antibacterial methods using nano-based PTT and PDT agents to treat infections caused by MDR bacteria. Finally, we highlight the existing challenges and future perspectives of synergistic PTT–PDT combination therapy against infections caused by MDR bacteria. We believe that this review will encourage synergistic PTT- and PDT-based antibacterial research and can be referenced for future clinical applications.

Polydopamine-Coated Radiolabeled Microspheres for Combinatorial Radioembolization and Photothermal Cancer Therapy

Transarterial radioembolization (TARE) is a local radionuclide therapy and is successfully used in hepatocellular carcinoma (HCC) treatment. Radioactive microspheres have been widely studied for TARE. Preparation of ideal radioactive microspheres is significant for clinical research and patient treatment. In this study, we have designed a novel multifunctional microsphere, i.e., polydopamine (PDA)-coated ¹⁷⁷Lu-radiolabeled silica microspheres (MS) denoted as ¹⁷⁷Lu-MS@PDA, which can be used for TARE and photothermal therapy (PTT). The radiostability of ¹⁷⁷Lu-MS@PDA was significantly improved by coating ¹⁷⁷Lu-MS with PDA. In addition, the coating of PDA makes microspheres have excellent photothermal performance. MicroSPECT/CT images showed that ¹⁷⁷Lu-MS@PDA was accurately embolized and remained in the tumor during the observation time. At the time, it also showed that ¹⁷⁷Lu-MS@PDA was very stable in vivo. Furthermore, the anti-tumor results demonstrated that TARE combined with PTT of ¹⁷⁷Lu-MS@PDA can significantly inhibit tumor growth without obvious side effects. ¹⁷⁷Lu-MS@PDA holds great potential as a promising radioactive microsphere for HCC.

pH/thermal dual-responsive multifunctional drug delivery system for effective photoacoustic imaging-guided tumor chemo/photothermal therapy

The development of a combination of chemo/photothermal therapy could overcome the limitations of single-modality therapy and enhance therapeutic efficacy. In this study, a pH/thermal dual-responsive multifunctional drug delivery system with dual-drug loading and enhanced chemo/photothermal therapy is developed based on polydopamine-coated mesoporous silica-gold nanorods (PDA-AuNRs@MSN). Nanoscale mesoporous silica-gold nanorods encapsulating doxorubicin (DOX) are designed as a core and then modified by polydopamine. The PDA shell not only conjugates with another anticancer bortezomib (Btz) to form pH-sensitive bond through boronic acid and catechol but also acts as a gatekeeper to control the release of doxorubicin and enhance the photothermal effect. Such a nanocarrier not only acts as a contrast agent for PA imaging but also serves as a therapeutic agent for enhanced chemo/photothermal therapy. The DOX and Btz could be released in an on-demand mode under near-infrared light irradiation and acid environment. The tumor size and location could be observed via PA imaging after intravenous injection into 4T1-bearing mice. Compared with AuNRs@MSN, PDA-AuNRs@MSN exhibit an increased near-infrared (NIR) absorption at 808 nm and an enhanced photothermal effect. The integrated D/B-PDA-AuNRs@MSN nanoparticles show higher cell apoptosis and enhanced tumor treatment efficacy in vitro and in vivo in comparison with single chemotherapy or photothermal therapy. Combined together, D/B-PDA-AuNRs@MSN show pH/thermal-responsive controlled-release and synergistic chemo/photothermal therapy for tumor.

Metal selenide nanomaterials for biomedical applications

Metal selenide nanomaterials have received enormous attention as they possess diverse compositions, microstructures, and properties. The combination of selenium with various metallic elements gives the metal selenide nanomaterials distinctive optoelectronic and magnetic properties, such as strong near-infrared absorption, excellent imaging properties, good stability, and long in vivo circulation. This makes metal selenide nanomaterials advantageous and promising for biomedical applications. This paper summarizes the research progress in the last five years in the controlled synthesis of metal selenide nanomaterials in different dimensions and with different compositions and structures. Then we discuss how surface modification and functionalization strategies are well-suited for biomedical fields, including tumor therapy, biosensing, and antibacterial biological applications. The future trends and issues of metal selenide nanomaterials in the biomedical field are also discussed.

Self-Assembled Aza-BODIPY and Iron(III) Nanoparticles for Photothermal-Enhanced Chemodynamic Therapy in the NIR-II Window

Despite its promising potential in cancer treatment, synergistic photothermal/chemodynamic therapy remains underdeveloped with regard to the utilization of metal-organic materials under second near-infrared (NIR-II) laser excitation. Herein, we report a three-dimensional network constructed via the metal coordination between catechol-functionalized aza-boron dipyrromethenes and iron ions (ABFe), which was further encapsulated by F127 to obtain ABFe nanoparticles (NPs) for combined photothermal/chemodynamic therapy. ABFe NPs exhibited intense absorption in the NIR-II range and negligible fluorescence. Upon 1064 nm laser irradiation, ABFe NPs showed high photothermal conversion efficiency (PCE = 55.0%) and excellent photothermal stability. The results of electron spin resonance spectra and o-phenylenediamine chromaticity spectrophotometry proved that ABFe NPs were capable of generating harmful reactive oxygen species from hydrogen peroxide for chemodynamic therapy, which was promoted by photothermal performance. Notably, in vitro and in vivo experiments demonstrated the great potential of ABFe NPs in photoacoustic imaging and photothermal-enhanced chemodynamic therapy under NIR-II laser irradiation. Therefore, the current work presents a prospective NIR-II excitation therapeutic nanomedicine for combination therapy, offering a novel strategy for simultaneously achieving extended NIR absorption of aza-BODIPY and enhanced chemodynamic therapy with metal-organic materials.

Recent Advances in Well-Designed Therapeutic Nanosystems for the Pancreatic Ductal Adenocarcinoma Treatment Dilemma

Pancreatic ductal adenocarcinoma (PDAC) is a highly malignant tumor with an extremely poor prognosis and low survival rate. Due to its inconspicuous symptoms, PDAC is difficult to diagnose early. Most patients are diagnosed in the middle and late stages, losing the opportunity for surgery. Chemotherapy is the main treatment in clinical practice and improves the survival of patients to some extent. However, the improved prognosis is associated with higher side effects, and the overall prognosis is far from satisfactory. In addition to resistance to chemotherapy, PDAC is significantly resistant to targeted therapy and immunotherapy. The failure of multiple treatment modalities indicates great dilemmas in treating PDAC, including high molecular heterogeneity, high drug resistance, an immunosuppressive microenvironment, and a dense matrix. Nanomedicine shows great potential to overcome the therapeutic barriers of PDAC. Through the careful design and rational modification of nanomaterials, multifunctional intelligent nanosystems can be obtained. These nanosystems can adapt to the environment's needs and compensate for conventional treatments' shortcomings. This review is focused on recent advances in the use of well-designed nanosystems in different therapeutic modalities to overcome the PDAC treatment dilemma, including a variety of novel therapeutic modalities. Finally, these nanosystems' bottlenecks in treating PDAC and the prospect of future clinical translation are briefly discussed.

Tumor-targeted molybdenum disulfide@barium titanate core-shell nanomedicine for dual photothermal and chemotherapy of triple-negative breast cancer cells

Combinational therapy can improve the effectiveness of cancer treatment by overcoming individual therapy shortcomings, leading to accelerated cancer cell apoptosis. Combinational cancer therapy is attained by a single nanosystem with multiple physicochemical properties providing an efficient synergistic therapy against cancer cells. Herein, we report a folate receptor-targeting dual-therapeutic (photothermal and chemotherapy) core-shell nanoparticle (CSNP) exhibiting a molybdenum disulfide core with a barium titanate shell (MoS₂@BT) to improve therapeutic efficacy against triple-negative breast cancer (TNBC) MDA-MB-231 cells. A simple hydrothermal approach was used to achieve the MoS₂@BT CSNPs, and their diameter was calculated to be approximately 180 ± 25 nm. In addition to improving the photothermal efficiency and stability of the MoS₂@BT CSNPs, their surface was functionalized with polydopamine (PDA) and subsequently modified with folic acid (FA) to achieve enhanced tumour-targeting CSNPs, named MoS₂@BT-PDA-FA (MBPF). Then, gemcitabine (Gem) was loaded into the MBPF, and its loading and releasing efficacy were calculated to be 17.5 wt% and 64.5 ± 3%, respectively. Moreover, the photothermal conversion efficiency (PCE) of MBPF was estimated to be 35.3%, and it also showed better biocompatibility, which was determined by an MTT assay. The MBPF significantly increased the ambient temperature to 56.3 °C and triggered Gem release inside the TNBC cells when exposed to a near-infrared (NIR) laser (808 nm, 1.5 W cm^-2, 5 min). Notably, the MoS₂@BT-based nanosystem was used as a photothermal agent and a therapeutic drug-loading container for combating TNBC cells. Benefiting from the combined therapy, MBPF reduced TNBC cell viability to 81.3% due to its efficient synergistic effects. Thus, the proposed tumour-targeting MoS₂@BT CSNP exhibits high drug loading, better biocompatibility, and improved anticancer efficacy toward TNBC cells due to its dual therapeutic approach in a single system, which opens up a new approach for dual cancer therapy.

Photothermal Hydrogels for Promoting Infected Wound Healing

Photothermal therapies (PTT), with spatiotemporally controllable antibacterial capabilities without inducing resistance, have shown encouraging prospects in the field of infected wound treatments. As an important platform for PTT, photothermal hydrogels exhibit attractive advantages in the field of infected wound treatment due to their excellent biochemical properties and have been intensively explored in recent years. This review summarizes the progress of the photothermal hydrogels for promoting infected wound healing. Three major elements of photothermal hydrogels, i.e., photothermal materials, hydrogel matrix, and construction methods, are introduced. Furthermore, different strategies of photothermal hydrogels in the treatment of infected wounds are summarized. Finally, the challenges and prospects in the clinical treatment of photothermal hydrogels are discussed.

Research progress on black phosphorus hybrids hydrogel platforms for biomedical applications

Hydrogels, also known as three-dimensional, flexible, and polymer networks, are composed of natural and/or synthetic polymers with exceptional properties such as hydrophilicity, biocompatibility, biofunctionality, and elasticity. Researchers in biomedicine, biosensing, pharmaceuticals, energy and environment, agriculture, and cosmetics are interested in hydrogels. Hydrogels have limited adaptability for complicated biological information transfer in biomedical applications due to their lack of electrical conductivity and low mechanical strength, despite significant advances in the development and use of hydrogels. The nano-filler-hydrogel hybrid system based on supramolecular interaction between host and guest has emerged as one of the potential solutions to the aforementioned issues. Black phosphorus, as one of the representatives of novel two-dimensional materials, has gained a great deal of interest in recent years owing to its exceptional physical and chemical properties, among other nanoscale fillers. However, a few numbers of publications have elaborated on the scientific development of black phosphorus hybrid hydrogels extensively. In this review, this review thus summarized the benefits of black phosphorus hybrid hydrogels and highlighted the most recent biological uses of black phosphorus hybrid hydrogels. Finally, the difficulties and future possibilities of the development of black phosphorus hybrid hydrogels are reviewed in an effort to serve as a guide for the application and manufacture of black phosphorus -based hydrogels. Recent applications of black phosphorus hybrid hydrogels in biomedicine.

Recent advances in responsive antibacterial materials: design and application scenarios

Bacterial infection is one of the leading causes of death globally, although modern medicine has made considerable strides in the past century. As traditional antibiotics are suffering from the emergence of drug resistance, new antibacterial strategies are of great interest. Responsive materials are appealing alternatives that have shown great potential in combating resistant bacteria and avoiding the side effects of traditional antibiotics. In this review, the responsive antibacterial materials are introduced in terms of stimulus signals including intrinsic (pH, enzyme, ROS, etc.) and extrinsic (light, temperature, magnetic fields, etc.) stimuli. Their biomedical applications in therapeutics and medical devices are then discussed. Finally, the author's perspective of the challenge and the future of such a system is provided.

Laser-activated nanoparticles for ultrasound/photoacoustic imaging-guided prostate cancer treatment

Prostate cancer (PCa) is the most common malignant tumor in men. Prostate-specific membrane antigen (PSMA), which is overexpressed on the surface of Prostate cancer cells, may serve as a potential therapeutic target. Recently, image-guided and targeted therapy for prostate cancers has attracted much attention by using Prostate-specific membrane antigen targeting nanoparticle. In this study, we produced PSMA-targeted light-responsive nanosystems. These nanosystems of liquid perfluorocarbon cores and polymer shells were loaded with the photosensitizer IR780 and therapeutic drugs paclitaxel. The liquid perfluorocarbon (PFP) in nanoparticles can perform ultrasound-enhanced imaging by liquid-gas transition and promote the deliver and release of paclitaxel. IR780 can perform photothermal therapy (PTT) guided by photoacoustic (PA) imaging. Combination treatment with photothermal therapy and chemotherapy exhibited excellent inhibition of cell proliferation in vitro and a significant therapeutic effect in vivo. In conclusion, we successfully formulated PSMA-targeted nanosystems with precision targeting and ultrasound/PA dual-modality imaging for anti-tumor effects.

Photoresponsive polymeric microneedles: An innovative way to monitor and treat diseases

Microneedles (MN) technology is an emerging technology for the transdermal delivery of therapeutics. When combined with photoresponsive (PR) materials, MNs can deliver therapeutics precisely and effectively with enhanced efficacy or synergistic effects. This review systematically summarizes the therapeutic applications of PRMNs in cancer therapy, wound healing, diabetes treatment, and diagnostics. Different PR approaches to activate and control the release of therapeutic agents from MNs are also discussed. Overall, PRMNs are a powerful tool for stimuli-responsive controlled-release therapeutic delivery to treat various diseases.

ε-poly-L-lysine-modified polydopamine nanoparticles for targeted photothermal therapy of drug-resistant bacterial keratitis

Bacterial keratitis can lead to intraocular infection and even blindness without prompt and potent treatments. Currently, clinical abuse of antibiotics encouraged the evolution of resistant bacteria. Conventional antibiotic eye drops based keratitis treatment has been heavily restricted due to the lack of bactericidal efficiency and easy induction of bacterial resistance. Hence, developing an effective treatment strategy for bacterial keratitis is of great significance. In this work, we investigated ε-poly-l-lysine (EPL)-modified polydopamine (PDA) nanoparticles (EPL@PDA NPs)-mediated antibacterial photothermal therapy (aPTT), to cope with methicillin-resistant Staphylococcus aureus (MRSA)-induced keratitis. The surface modification of cationic peptide EPL enables EPL@PDA NPs to specifically target negatively charged MRSA and induces local hyperthermia to kill the bacteria under low ambient temperature. Under near-infrared (NIR) irradiation, the sterilization efficiency of EPL@PDA NPs suspension for MRSA in vitro was up to 99.96%. The EPL@PDA-mediated aPTT presented potent antibacterial efficacy in treating MRSA-induced keratitis with little corneal epithelial cytotoxicity and good biocompatibility. In conclusion, the bacterial-targeting aPTT platform in this work provides a prospective method for the management of MRSA-induced refractory bacterial keratitis.

An Efficient, Short Stimulus PANC-1 Cancer Cell Ablation and Electrothermal Therapy Driven by Hydrophobic Interactions

Promising results in clinical studies have been demonstrated by the utilization of electrothermal agents (ETAs) in cancer therapy. However, a difficulty arises from the balance between facilitating the degradation of ETAs, and at the same time, increasing the electrothermal performance/stability required for highly efficient treatment. In this study, we controlled the thermal signature of the MoS₂ by harnessing MoS₂ nanostructures with M13 phage (MNM) via the structural assembling (hydrophobic interaction) phenomena and developed a combined PANC-1 cancer cell-MNM alternating current (AC)-stimulus framework for cancer cell ablation and electrothermal therapy. A percentage decrease in the cell viability of ~23% was achieved, as well as a degradation time of 2 weeks; a stimulus length of 100 μs was also achieved. Molecular dynamics (MD) simulations revealed the assembling kinetics in integrated M13 phage-cancer cell protein systems and the structural origin of the hydrophobic interaction-enabled increase in thermal conduction. This study not only introduced an 'ideal' agent that avoided the limitations of ETAs but also provided a proof-of-concept application of MoS₂-based materials in efficacious cancer therapy.

An Iron-NDC Framework with a Cage Structure and an Optothermal Conversion in NIR Window

Pursuing novel materials with efficient photothermal conversion under irradiation at the near-infrared region windows (NIR, 750-850 nm; NIR-I and NIR-II, 1000-1320 nm)) is of great importance due to their irreplaceable applications, especially in the biomedical field. Herein, on the basis of a coordination chemistry strategy, an iron-based metal-organic framework (MOF) of [N(CH3)4]2[Fe3(NDC)4]·DMF·3H2O (Fe-NDC, 1,4-H2NDC = 1,4-naphthalenedicarboxylic acid, N(CH3)4+ = tetramethyl-ammonium, and DMF = N,N-dimethylformamide) was prepared and characterized. Due to the d-d transition effect introduced by coordination with the transition-metal ion of iron and the highly conjugated naphthalenic moiety in 1,4-H2NDC, guaranteeing an energy transfer between iron and the organic module, Fe-NDC shows a remarkable broad absorption, which could be extended into the NIR-II section. As a result, Fe-NDC could be irradiated by NIR laser (both 808 and 1064 nm) to achieve photothermal conversion. This work sets a good example to inspire the future designation of NIR light-irradiated photothermal materials based on the first-row transition metals.