A retrospective study on clinical and radiological outcomes of oral implants in patients followed up for a minimum of 20 years

Number of dental abutments influencing the biomechanical behavior of tooth‒implant-supported fixed partial dentures: A finite element analysis

Background. Local or systemic issues might prevent installing a sufficient number of dental implants for fixed prosthetic rehabilitation. Splinting dental implants and natural teeth in fixed dentures could overcome such limitations. Therefore, this study aimed to evaluate the influence of the number of dental abutments in the biomechanics of tooth‒implant-supported fixed partial dentures (FPDs). The null hypothesis was that increasing the number of abutment teeth would not decrease the stress over the abutments and surrounding bone. Methods. Left mandibular lateral incisor, canine, premolars, and molars were reconstructed through computed tomography and edited using image processing software to represent a cemented fixed metal‒ceramic partial denture. Three models were set to reduce the number of abutment teeth: 1) lateral incisor, canine, and first premolar; 2) canine and first premolar; 3) the first premolar. The second premolar and first molar were set as pontics, and the second molar was set as an implant abutment in all the models. Finite element analyses were performed under physiologic masticatory forces with axial and oblique loading vectors. Results. After simulation of axial loads, the stress peaks on the bone around the implant, the bone around the first premolar, and prosthetic structures did not exhibit significant changes when the number of abutment teeth decreased. However, under oblique loads, decreasing the number of abutment teeth increased stress peaks on the surrounding bone and denture. Conclusion. Increasing the number of dental abutments in tooth‒implant-supported cemented FPD models decreased stresses on its constituents, favoring the prosthetic biomechanics.

Efficacy of preoperative antibiotics in prevention of dental implant failure: a Meta-analysis of randomized controlled trials

BACKGROUND

Dental implants are commonly used for replacement of missing teeth. Despite the published data highlighting the high success rate of dental implants, failures do occur. Some of these failures are believed to be a result of bacterial contamination at the site of implant insertion. Various antibiotic regimens have already been suggested to prevent failure due to infection.

OBJECTIVE

This meta-analysis aims to examine the efficacy of preoperative antibiotics in prevention of dental implant failure secondary to infections.

METHODOLOGY

An exhaustive search was conducted on electronic database including PubMed Medline, Google Scholar, Scopus, and Cochrane on July 15, 2019. All the randomized controlled trials (RCT) comparing preoperative antibiotics with no antibiotics/placebo in dental implants were included in the study. The primary outcome for assessment was implant failure. A random effect meta-analysis was conducted for risk ratios of dichotomous data.

RESULTS

A total 8544 abstracts were screened following which 16 full text articles were reviewed and 5 RCTs were included in the analysis. Meta-analysis results indicated that the preoperative antibiotics resulted in statistically significantly lower number of implant failures.

CONCLUSION

Preoperative antibiotics effectively reduce the implant failure rate. However, it is recommended to conduct large-scale RCT to determine the efficacy of preoperative antibiotics in dental implants.

Multicenter clinical trial on dental implants survival rate: a FDS76® study

BACKGROUND

Implantology, thanks to its predictability in oral rehabilitations, has become a widespread method for rehabilitating edentulous patients, offering excellent patient satisfaction. Improving the quality of oral health, especially if rehabilitation involves minimal short and long-term complications, leads to an improvement in the quality of life of our patients.

METHODS

This clinical study was conducted to evaluate the short and long-term complications (up to 18 months) of implant-prosthetic rehabilitations performed with a new dental implant (FDS76^®, Italy).

RESULTS

The results showed a limited number of complications or implant failures.

CONCLUSIONS

Knowing the latter could certainly help improve both surgical and dental materials performance.

Multicenter clinical trial on dental implants survival rate: a FDS76® study

BACKGROUND

Implantology, thanks to its predictability in oral rehabilitations, has become a widespread method for rehabilitating edentulous patients, offering excellent patient satisfaction. Improving the quality of oral health, especially if rehabilitation involves minimal short and long-term complications, leads to an improvement in the quality of life of our patients.

METHODS

This clinical study was conducted to evaluate the short and long-term complications (up to 18 months) of implant-prosthetic rehabilitations performed with a new dental implant (FDS76^®, Italy).

RESULTS

The results showed a limited number of complications or implant failures.

CONCLUSIONS

Knowing the latter could certainly help improve both surgical and dental materials performance.

Surface Modified Techniques and Emerging Functional Coating of Dental Implants

Dental implants are widely used in the field of oral restoration, but there are still problems leading to implant failures in clinical application, such as failed osseointegration, marginal bone resorption, and peri-implantitis, which restrict the success rate of dental implants and patient satisfaction. Poor osseointegration and bacterial infection are the most essential reasons resulting in implant failure. To improve the clinical outcomes of implants, many scholars devoted to modifying the surface of implants, especially to preparing different physical and chemical modifications to improve the osseointegration between alveolar bone and implant surface. Besides, the bioactive-coatings to promote the adhesion and colonization of ossteointegration-related proteins and cells also aim to improve the osseointegration. Meanwhile, improving the anti-bacterial performance of the implant surface can obstruct the adhesion and activity of bacteria, avoiding the occurrence of inflammation related to implants. Therefore, this review comprehensively investigates and summarizes the modifying or coating methods of implant surfaces, and analyzes the ossteointegration ability and anti-bacterial characteristics of emerging functional coatings in published references.

Retrospective study comparing the clinical outcomes of bar-clip and ball attachment implant-supported overdentures

The aim of this study was to compare the clinical outcomes of implant-supported overdentures (ODs) with either bar-clip or ball attachments. The implant, prosthesis failure, and technical complications were the outcomes analyzed in this retrospective clinical study conducted in a specialty clinic. Seventy-five patients with 242 implants supported by 76 ODs (36 maxillary, 40 mandibular) were included in the study and followed up for 88.8 ± 82.9 months (mean ± standard deviation). Bar-clip and ball attachments were used in 78.9% and 21.1% of the cases, respectively. Forty-three implant failures (17.8%) in 17 prostheses (17/76; 22.4%) were observed in this study. The average period of implant failure was 43.3 ± 41.0 months, and most of them were maxillary turned implants. The bar-clip system demonstrated more complications in the attachment parts compared to the ball attachment system. Poor retention of the prosthesis was similar between the two systems. Loss of implants resulted in the failure of 10 ODs in this study. ODs opposed by natural dentition or fixed prostheses presented with more complications. The Cox proportional hazards model did not show a significant effect on prosthesis failure for any of the factors. These findings indicated that patients with ODs need constant maintenance follow-ups to address the technical complications and perform prosthodontic maintenance regardless of the attachment system used.

Keratinocyte-Specific Peptide-Based Surfaces for Hemidesmosome Upregulation and Prevention of Bacterial Colonization

Percutaneous devices like orthopedic prosthetic implants for amputees, catheters, and dental implants suffer from high infection rates. A critical aspect mediating peri-implant infection of dental implants is the lack of a structural barrier between the soft tissue and the implant surface which could impede bacteria access and colonization of exposed implant surfaces. Parafunctional soft tissue regeneration around dental implants is marked by a lack of hemidesmosome formation and thereby weakened mechanical attachment. In response to this healthcare burden, a simultaneously hemidesmosome-inducing, antimicrobial, multifunctional implant surface was engineered. A designer antimicrobial peptide, GL13K, and a laminin-derived peptide, LamLG3, were coimmobilized with two different surface fractional areas. The coimmobilized peptide surfaces showed antibiofilm activity against Streptococcus gordonii while enhancing proliferation, hemidesmosome formation, and mechanical attachment of orally derived keratinocytes. Notably, the coatings demonstrated specific activation of keratinocytes: the coatings showed no effects on gingival fibroblasts which are known to impede the quality of soft tissue attachment to dental implants. These coatings demonstrated stability and retained activity against mechanical and thermochemical challenges, suggesting their intraoral durability. Overall, these multifunctional surfaces may be able to reduce peri-implantitis rates and enhance the success rates of all percutaneous devices via strong antimicrobial activity and enhanced soft tissue attachment to implants.

Analysis of technical complications and risk factors for failure of combined tooth-implant-supported fixed dental prostheses

BACKGROUND

The oral rehabilitation with fixed restorations supported by the combination of teeth and dental implants has been advocated in some cases.

PURPOSE

To assess the clinical outcomes of these prostheses. Fixed restorations supported by the combination of teeth and dental implants.

MATERIALS AND METHODS

This retrospective study included all patients treated with combined tooth-implant-supported fixed dental prostheses (FDPs) at one specialist clinic. Abutment/prosthesis failure and technical complications were the outcomes analyzed.

RESULTS

A total of 85 patients with 96 prostheses were included, with a mean follow-up of 10.5 years. Twenty prostheses failed. The estimated cumulative survival rate was 90.7%, 84.8%, 69.9%, and 66.2% at 5, 10, 15, and 20 years, respectively. The failure of tooth and/or implant abutments in key positions affected the survival of the prostheses. There were seven reasons for prostheses failure, with the loss of abutments exerting a significant influence. Bruxism was possibly associated with failures. Prostheses with cantilevers did not show a statistically significant higher failure rate. No group had a general higher prevalence of technical complications in comparison to the other groups.

CONCLUSIONS

Although combined tooth-implant-supported FDPs are an alternative treatment option, this study has found that across 20 years of service nearly 35% the prostheses may fail.

Demonstration of a SiC Protective Coating for Titanium Implants

To mitigate the corrosion of titanium implants and improve implant longevity, we investigated the capability to coat titanium implants with SiC and determined if the coating could remain intact after simulated implant placement. Titanium disks and titanium implants were coated with SiC using plasma-enhanced chemical vapor deposition (PECVD) and were examined for interface quality, chemical composition, and coating robustness. SiC-coated titanium implants were torqued into a Poly(methyl methacrylate) (PMMA) block to simulate clinical implant placement followed by energy dispersive spectroscopy to determine if the coating remained intact. After torquing, the atomic concentration of the detectable elements (silicon, carbon, oxygen, titanium, and aluminum) remained relatively unchanged, with the variation staying within the detection limits of the Energy Dispersive Spectroscopy (EDS) tool. In conclusion, plasma-enhanced chemical vapor deposited SiC was shown to conformably coat titanium implant surfaces and remain intact after torquing the coated implants into a material with a similar hardness to human bone mass.

Retrospective evaluation of implant-supported full-arch fixed dental prostheses after a mean follow-up of 10 years

OBJECTIVE

To assess the outcomes of implant-supported full-arch fixed dental prostheses (ISFAFDPs) and the supporting implants.

MATERIAL AND METHODS

This retrospective study included patients treated with ISFAFDPs at one specialist clinic. Implant/prosthesis failure and complications were the outcomes analyzed. Survival analysis methods were used.

RESULTS

A total of 709 patients with 869 ISFAFDPs (4,797 implants) were included, with a mean ± SD follow-up of 10.7 ± 7.2 years. A total of 353 implants and 62 prostheses failed. Estimated cumulative survival rates were as follows: 93.3% (95% CI 91.3, 95.3) after 10 years and 87.1% (95% CI 83.4, 90.8) after 20 years. Implants installed in bruxers, smokers, and maxilla had a lower survival than implants installed in non-bruxers, non-smokers, and mandible, respectively. A total of 415 ISFAFDPs (47.8%) presented technical complications, of which 67 (7.7%) presented only occurrences of loss/fracture of implant access hole sealing. Bruxism was a factor to exert a higher risk of screw loosening (HR 3.302; also in younger patients), screw fracture (HR 4.956), ceramic chipping/fracture (HR 5.685), and loss/fracture of acrylic teeth (HR 2.125; this last complication with higher risk also in men, in maxillae, and when the opposing jaw presented natural dentition or fixed prostheses). Patients with bruxism had a statistically significant higher risk of prosthesis failure than non-bruxers (HR 3.276).

CONCLUSIONS

ISFAFDPs presented good long-term prognosis. Failure of several supporting implants was the main reason for failure. The results of the present study strongly suggest that bruxism is an important contributor to implant and prosthesis failure, as well as to an increased prevalence of technical complications in ISFAFDPs.

Multi-Scale Surface Treatments of Titanium Implants for Rapid Osseointegration: A Review

The propose of this review was to summarize the advances in multi-scale surface technology of titanium implants to accelerate the osseointegration process. The several multi-scaled methods used for improving wettability, roughness, and bioactivity of implant surfaces are reviewed. In addition, macro-scale methods (e.g., 3D printing (3DP) and laser surface texturing (LST)), micro-scale (e.g., grit-blasting, acid-etching, and Sand-blasted, Large-grit, and Acid-etching (SLA)) and nano-scale methods (e.g., plasma-spraying and anodization) are also discussed, and these surfaces are known to have favorable properties in clinical applications. Functionalized coatings with organic and non-organic loadings suggest good prospects for the future of modern biotechnology. Nevertheless, because of high cost and low clinical validation, these partial coatings have not been commercially available so far. A large number of in vitro and in vivo investigations are necessary in order to obtain in-depth exploration about the efficiency of functional implant surfaces. The prospective titanium implants should possess the optimum chemistry, bionic characteristics, and standardized modern topographies to achieve rapid osseointegration.

Complications of Fixed Full-Arch Implant-Supported Metal-Ceramic Prostheses

We aimed to assess the biological and mechanical-technical complications and survival rate of implants of full-arch metal-ceramic prostheses, during five years of follow-up. 558 implants (of three different brands) retaining 80 full-arch metal-ceramic prostheses were placed in 65 patients, all of whom were examined annually for biological and mechanical-technical complications during the five years of follow-up. Descriptive statistics and univariate logistic regression were calculated. The cumulative survival rate of the implants was 99.8%, and 98.8% prosthesis-based. Mucositis was the most frequent of the biological complications and peri-implantitis was recorded as 13.8% at restoration-level, 16.9% at patient level and 2.0% at implant level. An implant length greater than 10 mm was shown to be a protective factor against biological complications. The mechanical-technical complications were associated with implant diameter, abutment/implant connection and retention system. Loss of screw access filling was the most frequent prosthetic complication, followed by the fracture of the porcelain. Full-arch metal-ceramic prostheses show a high prevalence of implant and prosthesis survival, with few biological and mechanical-technical complications.

Enhanced Osseointegration and Bio-Decontamination of Nanostructured Titanium Based on Non-Thermal Atmospheric Pressure Plasma

Alkali-treated titanate layer with nanonetwork structures (TNS) is a promising surface for improving osseointegration capacity in implants. Nevertheless, there is a risk of device failure as a result of insufficient resistance to biofilm contamination. This study tested whether treatment using a handheld non-thermal plasma device could efficiently eliminate biofilm contamination without destroying the surface nanostructure while re-establishing a surface that promoted new bone generation. TNS specimens were treated by a piezoelectric direct discharge (PDD) plasma generator. The effect of decontamination was performed utilizing Staphylococcus aureus. The evaluation of initial cell attachment with adhesion images, alkaline phosphatase activity, extracellular matrix mineralization, and expression of genes related to osteogenesis was performed using rat bone marrow mesenchymal stem cells, and the bone response were evaluated in vivo using a rat femur model. Nanotopography and surface roughness did not significantly differ before and after plasma treatments. Cell and bone formation activity were improved by TNS plasma treatment. Furthermore, plasma treatment effectively eliminated biofilm contamination from the surface. These results suggested that this plasma treatment may be a promising approach for the treatment of nanomaterials immediately before implantation and a therapeutic strategy for peri-implantitis.

Retrospective clinical evaluation of 2- to 6-unit implant-supported fixed partial dentures: Mean follow-up of 9 years

BACKGROUND

Implant-supported fixed partial dentures (ISFPDs) are one of the most common options to rehabilitate partially edentulous patients.

PURPOSE

To assess the clinical outcomes of ISFPDs.

METHODS

This retrospective study included all patients treated with ISFPDs with 2 to 6 prosthetic units at one specialist clinic. Implant/prosthesis failure and technical complications were the outcomes analyzed.

RESULTS

Six hundred and forty-two patients with 876 ISFPDs (2241 implants) were included, followed up for 108.0 ± 76.2 months. Eighty-eight prostheses and 112 implants (26 before, 86 after prosthesis installation) failed. The estimated CSR of ISFPDs at 30 years was 72.7%. Smokers presented lower implant survival than nonsmokers. Two hundred and ninety-nine ISFPDs (33.2%) presented technical complications. Bruxism was a factor to exert a higher risk of screw and implant fracture, and ceramic chipping. ISFPDs with cantilever presented higher risk of failure, and screw loosening/fracture. Prostheses supported by implants with internal abutment connection or with two pontics had higher risk of presenting ceramic chipping. Extension of the prosthesis did not seem to exert influence on prosthesis failure/complications.

CONCLUSIONS

ISFPDs presented good long-term prognosis. Implant failure was the main reason for ISFPD failure. The results suggest that bruxism and the presence of cantilever may contribute to the increased rate of mechanical complications and prosthesis failure.

Quality Assessment of Systematic Reviews on Platform-Switching vs Platform-Matched Implants: An Overview

The objective of this study was to perform a quality analysis of systematic reviews with meta-analyses that focused on the comparison of platform-switching (implant-abutment mismatching) and platform-matched (PM) implants. The assessment of multiple systematic reviews (AMSTAR) and Glenny (Checklist) Scales were used to qualify the studies. PubMed, Scientific Electronic Library Online (SciELO), Web of Science (formerly ISI Web of Knowledge), and Cochrane databases were searched, by topic, for systematic reviews on dental implants with switching platforms. A total of 8 systematic reviews, including 7 studies with meta-analyses, were selected. The AMSTAR scale indicated a high (n = 6) to moderate (n = 2) score for the included studies. The quantitative analysis indicated that platform-switching implants preserved more bone tissue when compared with platform-matched implants (6 meta-analyses; P < .001, smaller mean difference: -0.29 mm, 95% CI: -0.38, -0.19 and greater mean difference: -0.49 mm, 95% CI: -0.73, -0.26). Quantitative analysis based on 7 systematic reviews with meta-analysis indicated positive peri-implant bone preservation for implants restored with an implant-abutment mismatching (PSW). Further, there is evidence to improve the design of current systematic reviews. Future systematic reviews in this thematic area should consider searches in gray literature and different databases and include only randomized controlled clinical studies.

Dental Implants in Patients with Oral Lichen Planus: A Systematic Review

Background and Objectives: To integrate the available published data on patients with oral lichen planus (OLP) rehabilitated with dental implants, as well as to review the recommendations for OLP patients receiving implants. Materials and Methods: An electronic search was undertaken in February 2019 using five databases. Publications reporting cases of patients with OLP and rehabilitated with implant-supported oral prosthesis were included. Results: Twenty-two publications were included (230 patients, 615 implants). The overall implant failure rate was 13.9% (85/610). In patients with oral squamous cell carcinoma (OSCC) the failure rate was 90.6% (29/32), but none of these implants lost osseointegration; instead, the implants were removed together with the tumor. One study presented a very high implant failure rate, 76.4% (42/55), in patients with "active lichen planus", with all implants failing between 7-16 weeks after implant placement, and its conflicting and incongruent results are discussed in detail. There was a statistically significant difference between the failure rates in implants installed in different jaws (maxilla/mandible) and when implants of different surfaces were used (turned/moderately rough), but not between patients with reticular or erosive OLP types, or between male and female patients. If OSCC patients and the cases of the latter study are not considered, then the failure rate becomes very low (2.7%, 14/523). The time between implant placement and failure was 25.4 ± 32.6 months (range 1-112). The mean ± SD follow-up was 58.9 ± 26.7 months (1-180). Conclusions: When the results of the one study with a very high failure rate and of the cases that developed OSCC are not considered, the dental implant failure rate in OLP patients was 2.7% after a follow-up of approximately five years. Recommendations are given when treating OLP patients with dental implants.

Surface engineering of titanium alloy using metal-polyphenol network coating with magnesium ions for improved osseointegration

Although titanium-based implants are widely used in orthopedic and dental clinics, improved osseointegration at the bone–implant interface is still required.

Removal of osseointegrated dental implants: a systematic review of explantation techniques

OBJECTIVES

This systematic review aims to evaluate current literature regarding available techniques for removal of osseointegrated implants in terms of explantation's success, complications, and bone loss.

MATERIAL AND METHODS

Two reviewers conducted a systematic literature search through electronic databases (PubMed and EMBASE), complimented by manual and grey literature searches. Successful explantation was defined as the primary outcome. Complications and availability of residual bone for immediate implantation were defined as secondary outcomes.

RESULTS

Eighteen articles, comprising 372 implants and 241 patients, were included. Five techniques were identified: reverse torque, trephines, burs, piezosurgery, and laser-assisted explantation. Peri-implantitis was the most common reason for explantation, followed by crestal bone loss, fracture, and malpositioning. The reverse torque was the most frequently reported technique (284 implants) with 87.7% success rate. Burs were used for explantation of 49 implants with a 100% success rate, while trephines were utilized for removal of 35 implants with 94% success. Piezosurgery (11 implants) and Er.Cr:YSGG laser (1 implant) showed 100% success. One study reported perforation of the sinus floor following trephine explantation, while another reported fracture of 3 implants following reverse torque application. Further analysis was hindered by the quality of the available studies and their lack of data.

CONCLUSIONS

Reverse torque seems the most conservative, and in the authors' opinion, should be the first choice for explantation despite its inferior success rate. Additional studies with randomized controlled designs and larger sample sizes are required.

CLINICAL RELEVANCE

Dental implants have become the leading choice to replace missing teeth with gradually increasing numbers of complications and failures. An effective, conservative, and economic explantation technique is necessary to allow a successive implant placement.

Effect of Vitamin D Supplementation on Clinical and Radiographic Evaluation of Oral Rehabilitation with Osseointegrated Implants

Abstract   Vitamin D (VD) is important for the development and maintenance of bone tissue. This study used clinical and radiographic evaluations to analyze whether insufficient VD levels affect the periimplant health of patients with implant-supported prostheses. Data were collected for 33 patients with implant-supported prostheses: probing depth (PD); width of keratinized mucosa (wKM); bleeding index (mBI); periimplant plaque index (mPI); distance from implant to bone crest and VD level using chemiluminescence. After 1 year of implant-supported prosthesis installation, patients with levels under 30 ng/ml at baseline received 50000 IU of VD per week for 8 weeks (post treatment, PT), when clinical and radiographic evaluations were repeated for the control (n=19) and the VD (n=14) groups. Clinical and radiographic results were compared at baseline and at PT.  There were differences in PD (p=0.0247) and distance from implant to bone crest (p<0.0001), but there were not statistically different after supplementation.  wMK, mBI and mPI were not statistically different between groups.  VD levels were 24.95 ± 0.96 ng/mL in the VD group (42.42% of patients), whereas 57.57% of all participants had a mean VD value of 40.99 ± 1.23 ng/mL, a statistically significant difference (p = 0.0034). According to clinical and radiographic findings, VD serum levels do not seem to affect periimplant health. Keywords: Bone Density. Clinical Study. Dental Implantation.  ResumoA vitamina D (VD) é importante para o desenvolvimento e a manutenção do tecido ósseo. Este estudo clínico e radiográfico avaliou a reposição dos níveis de vitamina D na saúde periimplantar de pacientes com próteses implantossuportadas. Profundidade bolsa a sondagem (PS), largura da mucosa queratinizada (LMQ), sangramento a sondagem (mBI), presença de placa bacteriana (mPI), distância entre implante e cristas ósseas e dosagem de VD utilizando o teste de quimioluminescência, foram medidos em 33 pacientes. Pacientes com dosagens acima de 30 ng/ml foram classificados como suficientes de VD (grupo controle, n = 19). Pacientes com menos de 30ng/ml (grupo VD, n = 14) receberam, após 1 ano da instalação da prótese sobre implante, reposição de 50.000 UI por semana durante 8 semanas, quando os exames foram repetidos. Dados iniciais intragrupos, bem como dados iniciais e pós-tratamento (PT) intergrupos e intragrupos, foram comparados. Diferenças estatísticas foram encontradas em PS (p=0.0247) e distância entre crista óssea e implante (p<0.0001) entre os grupos, mas não após reposição. Não houve diferença em LMQ, mBI e mPI entre os grupos. O valor médio de VD do grupo VD foi 24,95±0.96 ng/ml para 42,42% dos pacientes, enquanto 57,57% da amostra apresentaram valor médio de 40,99±1.23 ng/ml, demonstrando diferença estatística (p=0.0034). A reposição de VD não parece influenciar os achados clínicos e radiográficos da saúde periimplantar. Palavras-chave: Densidade Óssea. Estudo Clínico. Implantação Dentária.

Antibacterial, Antibiofilm, and Antiadhesive Properties of Different Quaternized Chitosan Derivatives

In the era of antimicrobial resistance, the identification of new antimicrobials is a research priority at the global level. In this regard, the attention towards functional antimicrobial polymers, with biomedical/pharmaceutical grade, and exerting anti-infective properties has recently grown. The aim of this study was to evaluate the antibacterial, antibiofilm, and antiadhesive properties of a number of quaternized chitosan derivatives that have displayed significant muco-adhesive properties and wound healing promotion features in previous studies. Low (QAL) and high (QAH) molecular weight quaternized chitosan derivatives were synthetized and further modified with thiol moieties or pendant cyclodextrin, and their antibacterial activity evaluated as minimal inhibitory concentrations (MIC) and minimal bactericidal concentrations (MBC). The ability of the derivatives to prevent biofilm formation was assessed by crystal violet staining. Both QAL and QAH derivatives exerted a bactericidal and/or inhibitory activity on the growth of P. aeruginosa and S. epidermidis. The same compounds also showed marked dose-dependent anti-biofilm activity. Furthermore, the high molecular weight derivative (QAH) was used to functionalize titanium plates. The successful functionalization, demonstrated by electron microscopy, was able to partially inhibit the adhesion of S. epidermidis at 6 h of incubation. The shown ability of the chitosan derivatives tested to both inhibit bacterial growth and/or biofilm formation of clinically relevant bacterial species reveals their potential as multifunctional molecules against bacterial infections.

Dental implants in patients with epidermolysis bullosa: a systematic review

PURPOSE

To integrate the available data published on patients with epidermolysis bullosa (EB) rehabilitated with dental implants, as well as to review the recommendations for EB patients receiving implants.

METHODS

An electronic search was undertaken in February 2019 in five databases.

RESULTS

Sixteen publications were included, reporting 28 patients with EB, rehabilitated with 161 dental implants. The mean ± SD patients' age at implant surgery was 34.7 ± 12.1 years (range, 13-56). Only one implant was placed in the molar region, all other implants were placed in the incisor, canine, and premolar regions. Patients received a mean ± SD of 5.8 ± 2.8 implants (range, 2-11). Most of the patients received implant-supported fixed prostheses (fixed partial 14.3%, fixed full-arch 60.7%, overdenture 25%). Implant and prosthesis failure rates were 1.3% and 0%, respectively. The two implant failures were detected before or at the abutment connection. The mean ± SD follow-up time was of 39.2 ± 24.5 months (range, 6-111). The EB patient quality-of-life improved considerably as a result of treatment with dental implants. There is a series of dental care considerations that should be followed to smooth the implant treatment in EB patients.

CONCLUSIONS

The dental implant failure rate in EB patients seems to be very low, although the few cases reported in the literature were followed up for a short mean period, i.e., just a little bit longer than 3 years. More cases followed up for a long period are needed in order to be able to make a more reliable prognosis for the long-term oral rehabilitation of EB patients with dental implants.

In vitro digital image correlation analysis of the strain transferred by screw-retained fixed partial dentures supported by short and conventional implants

PURPOSE

This study used digital image correlation (DIC) to evaluate the strain transferred by splinted and non-splinted screw-retained fixed partial dentures (FPDs) supported by short and conventional implants.

MATERIAL AND METHODS

Four polyurethane models were fabricated to simulate half of the mandibular arch with acrylic resin replicas of the first premolar. Short (5 mm) and/or conventional (11 mm) implants replaced the second premolar and the first and second molars. Groups were: G1, two conventional (second premolar and first molar) and one short (second molar) implant; G2, one conventional (second premolar) and two short (first and second molar) implants; G3, three short implants; and G4, three conventional implants. Splinted (S) and non-splinted (NS) FPDs were screwed to the implant abutments. Occlusal load and a single point load on the second premolar, both of 250 N, were applied. Strain in the horizontal direction (Ɛ_xx) was calculated and compared using the DIC software.

RESULTS

Splinted crowns presented the highest strain magnitudes of all tested groups (p < 0.05). The strain was concentrated near the short implants and presented a higher magnitude compared to conventional implants, especially in G2S (-560.13 μS), G3S (-372.97 μS), and G4S (-356.67 μS).

CONCLUSIONS

Splinted crowns presented a higher strain concentration around the implants, particularly near the implant replacing the first molar. A combination of short and conventional implants seems to be a viable alternative for the rehabilitation of the posterior edentulous mandible with reduced bone height.

Risk indicators for marginal bone resorption around implants in function for at least 4 years: A retrospective longitudinal study

BACKGROUND

Marginal bone stability is considered one of the most important issues in implant dentistry. It is essential to understand how various factors influence bone resorption around implants. The purpose of this retrospective longitudinal study was to identify potential risk indicators associated with marginal bone resorption around implants in function for at least 4 years.

METHODS

Several systemic-related, intraoral-related, implant-related factors were collected. Marginal bone level change (MBLC) was determined by comparing intraoral radiographs taken at baseline (1 year after prosthesis delivery), and at follow-up (over 3 years from baseline). A hierarchical regression analysis using liner mixed-effects models was performed to examine correlations between MBLC and various factors.

RESULTS

Overall, 514 patients with 1535 implants were analyzed. The mean age of the participants was 62.9 years. Mean annual MBLC was 0.048 mm, and mean functional time was 5.96 years. The result showed that the following explanatory variables had significant effects on MBLC: functional time, plaque control record > 20%, Eichner index C1-3, maxilla, cement-retained superstructure, and keratinized mucosa width < 2 mm. We did not find statistically significant associations between bone resorption and some variables known as risk factors, such as diabetes, smoking, and history of periodontitis.

CONCLUSIONS

Within the limits of this study, longer functional time, poor oral hygiene, loss of occlusal support, location in the maxilla, cement-retained superstructure, and less keratinized mucosa should be considered as risk indicators for bone resorption around implants.

Dental implants in patients with Sjögren's syndrome: a case series and a systematic review

The purpose of this study was to assess the clinical outcomes of dental implants in patients with Sjögren's syndrome (SS). The study consisted of two parts: report of a case series and a systematic review of the literature. The results of the clinical series revealed that 19 patients received 107 implants and were followed for a mean of 125months. Two patients lost three implants (failure rate 2.8%, 3/107). At the last follow-up, there was a mean marginal bone loss (MBL) of -2.190±1.384 mm; estimated MBL after 30 years was 4.39mm. The review identified 18 studies, resulting in 19 studies for analysis including the present clinical series. A total of 712 implants were placed in 186 patients; 705 implants were followed up for a mean of 72.5 months (failure rate 4.1%, 29/705; failed at a mean time of 12.9±31.7months). The probability of failure was 2.8% (95% confidence interval 1.6-4.1%). Primary SS patients had a lower implant failure rate (2.5%, 3/118) than secondary SS patients (6.5%, 12/184). In conclusion, dental implants should be considered by dentists as a viable treatment option for patients with SS, as the failure rate is fairly low. SS patients may, however, present a higher MBL around implants than patients from the general population.

Intraosseous Temperature Change during Installation of Dental Implants with Two Different Surfaces and Different Drilling Protocols: An In Vivo Study in Sheep

Background: The intraosseous temperature during implant installation has never been evaluated in an in vivo controlled setup. The aims were to investigate the influence of a drilling protocol and implant surface on the intraosseous temperature during implant installation, to evaluate the influence of temperature increase on osseointegration and to calculate the heat distribution in cortical bone. Methods: Forty Brånemark implants were installed into the metatarsal bone of Finnish Dorset crossbred sheep according to two different drilling protocols (undersized/non-undersized) and two surfaces (moderately rough/turned). The intraosseous temperature was recorded, and Finite Element Model (FEM) was generated to understand the thermal behavior. Non-decalcified histology was carried out after five weeks of healing. The following osseointegration parameters were calculated: Bone-to-implant contact (BIC), Bone Area Fraction Occupancy (BAFO), and Bone Area Fraction Occupancy up to 1.5 mm (BA1.5). A multiple regression model was used to identify the influencing variables on the histomorphometric parameters. Results: The temperature was affected by the drilling protocol, while no influence was demonstrated by the implant surface. BIC was positively influenced by the undersized drilling protocol and rough surface, BAFO was negatively influenced by the temperature rise, and BA1.5 was negatively influenced by the undersized drilling protocol. FEM showed that the temperature at the implant interface might exceed the limit for bone necrosis. Conclusion: The intraosseous temperature is greatly increased by an undersized drilling protocol but not from the implant surface. The temperature increase negatively affects the bone healing in the proximity of the implant. The undersized drilling protocol for Brånemark implant systems increases the amount of bone at the interface, but it negatively impacts the bone far from the implant.

Nano-scale modification of titanium implant surfaces to enhance osseointegration

The main aim of this review study was to report the state of art on the nano-scale technological advancements of titanium implant surfaces to enhance the osseointegration process. Several methods of surface modification are chronologically described bridging ordinary methods (e.g. grit blasting and etching) and advanced physicochemical approaches such as 3D-laser texturing and biomimetic modification. Functionalization procedures by using proteins, peptides, and bioactive ceramics have provided an enhancement in wettability and bioactivity of implant surfaces. Furthermore, recent findings have revealed a combined beneficial effect of micro- and nano-scale modification and biomimetic functionalization of titanium surfaces. However, some technological developments of implant surfaces are not commercially available yet due to costs and a lack of clinical validation for such recent surfaces. Further in vitro and in vivo studies are required to endorse the use of enhanced biomimetic implant surfaces. STATEMENT OF SIGNIFICANCE: Grit-blasting followed by acid-etching is currently used for titanium implant modifications, although recent technological biomimetic physicochemical methods have revealed enhanced osteoconductive and anti-microbial outcomes. An improvement in wettability and bioactivity of titanium implant surfaces has been accomplished by combining micro and nano-scale modification and functionalization with protein, peptides, and bioactive compounds. Such morphological and chemical modification of the titanium surfaces induce the migration and differentiation of osteogenic cells followed by an enhancement of the mineral matrix formation that accelerate the osseointegration process. Additionally, the incorporation of bioactive molecules into the nanostructured surfaces is a promising strategy to avoid early and late implant failures induced by the biofilm accumulation.

Retrospective clinical evaluation of implant-supported single crowns: Mean follow-up of 15 years

OBJECTIVE

To retrospectively assess the clinical outcomes of implant-supported single crowns and the supporting implants.

MATERIAL AND METHODS

This retrospective study included all patients treated with implant-supported single crowns at one specialist clinic. Implant and prosthesis failure, and mechanical/technical complications (ceramic fracture/chipping; crown loss of retention/mobility; crown failure/fracture; loosening/loss/fracture of prosthetic screw; and implant failure/fracture) were the outcomes analyzed. Any condition/situation that led to the removal/replacement of crowns was considered prosthesis failure.

RESULTS

A total of 438 patients with 567 crowns were included. Mean ± SD follow-up of 183.4 ± 69.3 months. A total of 37 implants (6.5%) and 54 crowns (9.5%) failed. If only technical problems were considered, the crown failure rate decreased to 4.1% (23/567). Most common reasons for crown failure: esthetic issue (n = 12), crown constantly mobile (n = 9), change to another type of prosthesis together with other implants (n = 8), crown fracture (n = 7), and crown in infraposition in comparison with adjacent teeth (n = 7). The odds of crown failure were shown to be statistically significantly higher for the following factors: younger patients, maxillary crowns, and screw-retained crowns. Loose prosthetic screw was much more prevalent in screw-retained than in cemented crowns. Ceramic fracture/chipping was more prevalent in screw-retained crowns, maxillae, females. Crown fracture was more prevalent in ceramic crowns, screw-retained crowns, maxillae, posterior region, females. However, these differences were statistically significant only for crown fractures in females.

CONCLUSIONS

The odds of crown failure were significant for some factors, but one must keep in mind that non-technical complications are as common as technical ones as reasons for the replacement of implant-supported single crowns.

Bone Immune Response to Materials, Part II: Copper and Polyetheretherketone (PEEK) Compared to Titanium at 10 and 28 Days in Rabbit Tibia

Osseointegration is likely the result of an immunologically driven bone reaction to materials such as titanium. Osseointegration has resulted in the clinical possibility to anchor oral implants in jaw bone tissue. However, the mechanisms behind bony anchorage are not fully understood and complications over a longer period of time have been reported. The current study aims at exploring possible differences between copper (Cu) and polyetheretherketone (PEEK) materials that do not osseointegrate, with osseointegrating cp titanium as control. The implants were placed in rabbit tibia and selected immune markers were evaluated at 10 and 28 days of follow-up. Cu and PEEK demonstrated at both time points a higher immune activation than cp titanium. Cu demonstrated distance osteogenesis due to a maintained proinflammatory environment over time, and PEEK failed to osseointegrate due to an immunologically defined preferential adipose tissue formation on its surface. The here presented results suggest the description of two different mechanisms for failed osseointegration, both of which are correlated to the immune system.

Are There Alternatives to Invasive Site Development for Dental Implants? Part I

Edentulous sites are often characterized by inadequate bone volume for dental implant therapy. Bone augmentation procedures for site development involve longer healing period and are often invasive, costly, and associated with postoperative morbidity. This article discusses alternatives to invasive bone grafting procedures that are often used to develop implant sites. Owing to the broad nature of this topic, it is presented in two articles. In part I, the use of short and narrow-diameter implants are discussed. Part II reviews the use of tilted as well as fewer implants to support a prosthesis.

Prophylactic antibiotic regimens in dental implant failure: A systematic review and meta-analysis

BACKGROUND

In this systematic review and meta-analysis, the authors examine the efficacy of antibiotic prophylaxis (AP) and specific antibiotic regimens for prevention of dental implant failure in patients who are healthy overall.

TYPES OF STUDIES REVIEWED

The authors independently conducted electronic database and manual searches to identify randomized controlled trials (RCTs). The authors selected articles on the basis of eligibility criteria and assessed for risk of bias by using the Cochrane Handbook. Implant failure was the primary outcome studied; perimucositis or implantitis, prosthetic failure, and adverse events were secondary outcomes studied. The authors conducted random effects meta-analysis for risk ratios of dichotomous data and used OpenMeta[Analyst] (Center for Evidence Synthesis, Brown School of Public Health) for qualitative assessment of administration schedules.

RESULTS

With duplicates removed, the authors screened 1,022 abstracts, reviewed 21 full-text articles, and included 8 RCTs that included 2,869 implants in 1,585 patients. Meta-analysis results indicated that AP resulted in a statistically significantly lower number of implant failures for all regimens combined (implant, P = .005; patient, P = .002), as well as preoperative (implant, P = .01; patient, P = .007), pre- and postoperative (implant, P = .04), and postoperative AP only (implant, P = .02), compared with no antibiotics. The authors found no statistically significant differences in analysis of comparative antibiotic treatments or secondary outcomes. The authors identified confounding variables.

CONCLUSIONS AND PRACTICAL IMPLICATIONS

Although meta-analysis results suggested that AP may reduce implant failure, definitive conclusions cannot be achieved yet. The overall nonsignificant differences reported in individual trials, limitations discussed, implant infection outcomes, and antibiotic-associated risks must be considered. Thus, the results for implant failure outcomes may not warrant the indiscriminate use of antibiotics in patients who are healthy who are receiving dental implants. Investigators must conduct large-scale RCTs to determine the efficacy of AP and various regimens, independent of confounding variables.

Longitudinal assessment of clinical and radiographic periimplant status around narrow and regular diameter implants placed in cigarette-smokers and nonsmokers

BACKGROUND

To date, no clinical investigation has assessed the clinical and radiographic indices around narrow diameter implants (NDIs) and regular diameter implants (RDIs) in individuals with cigarette smoking habit and nonsmokers.

OBJECTIVE

To estimate and compare the clinical and radiographic indices around NDIs (< 3.3 mm) and RDIs placed in cigarette smokers (CS) and nonsmokers (NS).

MATERIALS AND METHODS

Eighty-six patients requiring implant surgery in the anterior mandible were divided into two groups (39 CS and 43 NS). Patients were further categorized into two subgroups on the basis of implant diameter: (a) patients with NDIs (3.3 mm) and (b) patients with RDIs (4.1 mm). Clinical indices evaluating plaque index (PI), bleeding on probing (BOP), and probing depth (PD) were recorded at 18 and 36 months of follow-up. Digital periapical radiographs were studied to evaluate crestal bone levels (CBL) incorporating in a specialized software and examined on a calibrated computer display screen with the help of an image analyzer.

RESULTS

The mean age of patients in CS group and NS group was 44.6 and 42.5 years, respectively. There was no statistically significant difference in the overall mean scores of PI, PD, and CBL around NDIs and RDIs among CS and NS patients at 18 and 36 months of follow-up. However, there was a statistically significant difference only in the overall mean BOP around NDIs and RDIs among CS and NS patients at 18 and 36 months of follow-up.

CONCLUSION

The findings of the current study suggests that NDIs can show reliable clinical stability and radiographic bone levels as RDIs placed in CS and NS, with the support of strict oral hygiene protocols.

Coupling between Osseointegration and Mechanotransduction to Maintain Foreign Body Equilibrium in the Long-Term: A Comprehensive Overview

The permanent interaction between bone tissue and the immune system shows us the complex biology of the tissue in which we insert oral implants. At the same time, new knowledge in relation to the interaction of materials and the host, reveals to us the true nature of osseointegration. So, to achieve clinical success or perhaps most importantly, to understand why we sometimes fail, the study of oral implantology should consider the following advice equally important: a correct clinical protocol, the study of the immunomodulatory capacity of the device and the osteoimmunobiology of the host. Although osseointegration may seem adequate from the clinical point of view, a deeper vision shows us that a Foreign Body Equilibrium could be susceptible to environmental conditions. This is why maintaining this cellular balance should become our therapeutic target and, more specifically, the understanding of the main cell involved, the macrophage. The advent of new information, the development of new implant surfaces and the introduction of new therapeutic proposals such as therapeutic mechanotransduction, will allow us to maintain a healthy host-implant relationship long-term.

Glutathione Metabolism, Mitochondria Activity, and Nitrosative Stress in Patients Treated for Mandible Fractures

The aim of the study was to evaluate the effect of titanium bone fixations on mitochondrial activity, reactive oxygen species (ROS) production, glutathione metabolism, and selected markers of oxidative/nitrosative stress in the periosteum-like tissue of patients treated with mandible fractures. The study group consisted of 30 patients with bilateral fractures of the mandible body eligible for surgical treatment. Our study is the first one that indicates disturbances of mitochondrial activity as well as a higher production of ROS in the periosteum-like tissue covering titanium fixations of the mandible. We also found significantly higher levels of reduced glutathione and enhanced activity of glutathione reductase in the periosteum homogenates of patients in the study group compared to the control group. Levels of nitrosative (S-nitrosothiols, peroxynitrite, nitrotyrosine) and oxidative stress biomarkers (malondialdehyde, protein carbonyls, dityrosine, kynurenine, and N-formylkynurenine) were statistically elevated in periosteum-like tissue covering titanium fixations. Although exposure to titanium fixations induces local antioxidant mechanisms, patients suffer oxidative damage, and in the periosteum-like tissue the phenomenon of metallosis was observed. Titanium implants cause oxidative/nitrosative stress as well as disturbances in mitochondrial activity.

Low serum vitamin D and early dental implant failure: Is there a connection? A retrospective clinical study on 1740 implants placed in 885 patients

Background. Since osseointegration depends on bone metabolism, low levels of vitamin D in the blood may negatively affect bone formation around dental implants. To date, only a few studies have investigated the possible connection between serum levels of vitamin D and early dental implant failure (EDIF), i.e. failure that occurs within 4 months after placement, before the connection of the prosthetic abutment. The aim of this study was to investigate whether there is a relationship between low serum levels of vitamin D and EDIF.

Methods. Data used for this retrospective study were derived from the records of a private dental clinic. Inclusion criteria were patients who had been treated with dental implants, inserted with a submerged technique from January 2003 to December 2017. EDIF was the outcome of this study. Chi-squared test was used to investigate the effect of patient-related variables (age, gender, smoking habit, history of periodontal disease and serum levels of vitamin D) on EDIF.

Results. Originally, 885 patients treated with 1,740 fixtures were enrolled in this study. Overall, 35 EDIFs (3.9%) were reported. No correlation was found between EDIF and the patients' gender (P=0.998), age (P=0.832), smoking habit (P=0.473) or history of periodontal disease (P=0.386). Three EDIFs (11.1%) were reported in 27 patients with serum levels of vitamin D <10 ng/mL, 20 EDIFs (4.4%) in 448 patients with levels between 10 and 30 ng/mL, and 12 EDIFs (2.9%) in 410 patients with levels >30 ng/mL. Although there was a clear trend toward an increased incidence of EDIF with lowering of serum vitamin D levels, no statistically significant difference (P=0.105) was found among these three groups.

Conclusion. Within its limitations (retrospective design, low number of patients with severe blood levels of vitamin D enrolled), this study failed to demonstrate a significant relationship between low serum levels of vitamin D and increased risk of EDIF. However, since a dramatic increase in EDIFs with lowering of vitamin D levels in the blood has been reported, further clinical studies with appropriate design (prospective or randomized controlled studies on a larger sample of severely deficient patients) are needed to better investigate this topic

Dental implants in patients with ectodermal dysplasia: A systematic review

PURPOSE

This study sought to assess the clinical outcome and survival rate of oral implants placed in individuals with ectodermal dysplasia (ED), based on previously published studies.

METHODS

An electronic search without time restrictions was undertaken in 5 databases (PubMed/Medline, Web of Science, ScienceDirect, J-Stage, Lilacs). Descriptive statistics, Kaplan Meier estimator and implant failure probability were calculated.

RESULTS

90 publications were included, reporting 228 ED patients that received 1472 implants (1392 conventional, 47 zygomatic, 33 mini-implants). Mean age of the patients was 20.2 ± 6.8 years (2-56). Patients had a mean of 3.2 ± 2.5 maxillary and 2.1 ± 2.6 mandibular permanent teeth (min-max, 0-14). Patients received a mean of 8.2 ± 3.8 implants (1-20). Most implants were placed in the third decade of life, 24.6% of the implants were placed in children (0-17 years of age). 1391 implants had information on follow-up (72 failures, 5.2%). The 20-year CSR was 84.6%. The probability of failure was 4.5% (95%CI 3.5%-5.6%, p < 0.001). Additional treatments performed were Le Fort I (99 implants, 20 patients, 3.5% failed), grafting (497 implants, 77 patients, 5.2% failed), distraction osteogenesis (79 implants, 16 patients, 10.1% failed). Mean follow-up was 42.9 ± 41.9 months (min-max, 2-240).

CONCLUSIONS

Dental implants placed in ED patients, either infants or adults, present a high survival rate (20-year CSR 84.6%).

The Use of a Novel Porcine Derived Acellular Dermal Matrix (Mucoderm) in Peri-Implant Soft Tissue Augmentation: Preliminary Results of a Prospective Pilot Cohort Study

Objective

Over the years, several techniques have been proposed for soft tissue augmentation around dental implants in order to improve keratinized mucosa width (KMW). Recently, a porcine derived acellular dermal matrix (Mucoderm®) has been proposed as autogenous graft substitute in order to avoid palatal harvesting and obtain comparable results to connective tissue grafts, in terms of aesthetics and function. The aim of this study is to present the one-year follow-up results of this matrix in peri-implant soft tissue augmentation procedures.

Material and Methods

Twelve patients were enrolled in this pilot prospective study: a dental implant was placed in the upper premolar area and, at implant uncovering after eight weeks, the matrix was inserted. KMW gain was considered as primary outcome variable.

Results

After one month from matrix insertion, mean KMW was 7.86±3.22 mm (100%), with no statistically significant intragroup variations (p>0.05). No membrane exposures or wound healing complications occurred during postoperative phase and, after one year, mean KMW was 5.67±2.12 mm (72.13%).

Conclusions

The results of the present pilot study indicate that by placing a Mucoderm membrane during implant surgery the keratinized tissue width can be augmented, and the width remains stable for the assessment period of 12 months. Further studies with greater power and longer investigation period are needed to confirm the suggestion for clinical use. Clinical trial registration number is EudraCT number 2018-000147-16.