Expressed protein ligation

Single-molecule fluorescence studies of protein folding

The structural and dynamic details of protein folding are still widely unexplored due to the enormous level of heterogeneity intrinsic to this process. The unfolded polypeptide chain can assume a vast number of possible conformations, and many complex pathways lead from the ensemble of unfolded conformations to the ensemble of native conformations in an overall funnel-shaped energy landscape. Classical experimental methods involve measurements on bulk samples and usually yield only average values characteristic of the entire molecular ensemble under study. The observation of individual molecules avoids this averaging and allows, in principle, microscopic distributions of conformations and folding trajectories to be revealed. Fluorescence-based techniques are arguably the most versatile single-molecule methods at present, and Förster resonance energy transfer (FRET) between two dye molecules specifically attached to the protein of interest provides a means of studying the inter-dye distance and, thereby, the conformation of folding polypeptide chains in real time. This chapter focuses on practical aspects and different experimental realizations for protein folding investigations by using single-molecule fluorescence.

A copper-catalyzed, pH-neutral construction of high-enantiopurity peptidyl ketones from peptidic s-acylthiosalicylamides in air at room temperature

A copper-catalyzed transformation of peptidic thiol esters and boronic acids gives peptidyl ketones and takes place in DMF or DMF/H(2)O at room temperature in air (see scheme). This aerobic reaction only occurs at a thiol ester group capable of coordinating to Cu through its appendage on the sulfur center and is not hampered by racemization of the reactants or products.

Semisynthesis and segmental isotope labeling of the apoE3 N-terminal domain using expressed protein ligation

Apolipoprotein E (apoE) is an exchangeable apolipoprotein that functions as a ligand for members of the LDL receptor family, promoting lipoprotein clearance from the circulation. Productive receptor binding requires that apoE adopt an LDL receptor-active conformation through lipid association, and studies have shown that the 22 kDa N-terminal (NT) domain (residues 1-183) of apoE is both necessary and sufficient for receptor interaction. Using intein-mediated expressed protein ligation (EPL), a semisynthetic apoE3 NT has been generated for use in structure-function studies designed to probe the nature of the lipid-associated conformation of the protein. Circular dichroism spectroscopy of EPL-generated apoE3 NT revealed a secondary structure content similar to wild-type apoE3 NT. Likewise, lipid and LDL receptor binding studies revealed that EPL-generated apoE3 NT is functional. Subsequently, EPL was used to construct an apoE3 NT enriched with 15N solely and specifically in residues 112-183. 1H-15N heteronuclear single quantum correlation spectroscopy experiments revealed that the ligation product is correctly folded in solution, adopting a conformation similar to wild-type apoE3-NT. The results indicate that segmental isotope labeling can be used to define the lipid bound conformation of the receptor binding element of apoE as well as molecular details of its interaction with the LDL receptor.

Artificial chemokines: combining chemistry and molecular biology for the elucidation of interleukin-8 functionality

How can we understand the contribution of individual parts or segments to complex structures? A typical strategy to answer this question is simulation of a segmental replacement followed by realization and investigation of the resulting effect in structure-activity studies. For proteins, this problem is commonly addressed by site-directed mutagenesis. A more general approach represents the exchange of whole secondary structure elements by rationally designed segments. For a demonstration of this possibility we identified the alpha-helix at the C-terminus of human interleukin-8 (hIL-8). Since this chemokine possesses four conserved cysteine residues, it can easily be altered by ligation strategies. A set of different segments, which are able to form amphiphilic helices, was synthesized to mimic the C-terminal alpha-helix. Beside sequences of alpha-amino acids, oligomers of non-natural beta(3)-amino acids with the side chains of canonical amino acids were introduced. Such beta-peptides form helices, which differ from the alpha-helix in handedness and dipole orientation. Variants of the semisynthetic hIL-8 proteins demonstrated clearly that the exact side chain orientation is of more importance than helix handedness and dipole orientation. The activity of a chimeric protein with a beta-peptide helix that mimics the side chain orientation of the native alpha-helix most perfectly is comparable to that of the native hIL-8. Concepts like this could be a first step toward the synthesis of proteins consisting of large artificial secondary structure elements.

Incorporation of isotopically enriched amino acids

The incorporation of isotope labels into proteins is extremely useful for the application of nuclear magnetic resonance (NMR), X-ray or neutron-diffraction crystallography, and mass spectrometry (MS) methodologies to investigate the structure and dynamics of proteins. This unit presents methods for incorporating isotopic labels into proteins via expression in E. coli and baculovirus transfected Sf9 insect cells or through cell-free means. The unit also presents methods for introducing isotopic labels by chemical means into synthetic peptides by solid phase peptide synthesis or into isolated proteins by chemical modification of labile protein groups.

High yield production of recombinant native and modified peptides exemplified by ligands for G-protein coupled receptors

G-protein coupled receptors (GPCRs) comprise a large family of membrane proteins and attract pharmaceutical interest as therapeutic targets. Two examples of class B GPCRs that are involved in metabolic diseases are the Parathyroid hormone receptor 1 (PTHR1) and the Glucagon-like-peptide-1 receptor (GLP-1R) which play central roles in osteoporosis and diabetes mellitus type II, respectively. Class B GPCRs are characterised by a large extracellular N-terminal domain with a typical disulfide bridge pattern. This domain is responsible for the binding of peptide hormone ligands. Here we report the recombinant expression of these ligands in natural and several modified forms for their use in functional assays, NMR analyses or affinity purification of receptor/ligand complexes for crystallisation. Applying the SUMO system, low cost expression of soluble fusion-proteins is achieved. Moreover, via the SUMO cleavage site, the authentic N-terminal sequence which is essential for ligand-receptor interactions can be obtained. Purification of the peptide by RP-HPLC results in >98% pure preparations. The strategy can also be adopted for many other purposes, especially if small peptides are needed at either large amounts or with specific features like isotope, affinity or fluorescent labels. Furthermore, for the growing demand for therapeutic peptides, this method could represent a straightforward production process.

N-terminal cysteinyl proteins can be prepared using thrombin cleavage

Expressed protein ligation--which allows native proteins to be selectively linked together by a normal peptide bond in an aqueous environment--has emerged as a powerful technique. The technique requires the formation of a C-terminal alpha-thioester and an N-terminal Cys. An N-terminal Cys can be formed by enzymatic cleavage, commonly using the Factor Xa and TEV proteases. We show that thrombin can be used for the formation of N-terminal Cys, providing another choice of reagents for expressed protein ligation. Proteins with N-terminal Cys can be obtained by the convenient modification of vectors with the putative thrombin cleavage site LVPRG to LVPRC. Two example protein domains (Csk and Abl tyrosine kinase domain) with N-terminal Cys are demonstrated using this method. The use of thrombin protease to generate N-terminal Cys overcomes some of the limitations of existing methods, making it generally useful for expressed protein ligation and other biotechnological applications.

Expressed protein ligation using an N-terminal cysteine containing fragment generated in vivo from a pelB fusion protein

Advances in expressed protein ligation (EPL) methods that permit specific introduction of unique modifications into proteins have facilitated protein engineering, structure-function and protein interaction studies. An EPL-generated hybrid exchangeable apolipoprotein has been constructed from recombinant fragments of apolipoprotein E (apoE) and apolipophorin III (apoLp-III). A recombinant fusion protein comprised of human apoE N-terminal residues 1-111, a modified Saccharomyces cerevisiae intein and a chitin binding domain was subjected to 2-mercaptoethanesulfonic acid (MESNA) induced cleavage to generate apoE(1-111)-MESNA. A second fusion protein was comprised of a bacterial pelB leader peptide fused to a variant form of Galleria mellonella apoLp-III residues 1-91. The N-terminal pelB leader sequence directed the newly synthesized fusion protein to the Escherichia coli perisplamic space where endogenous leader peptidase cleavage generated the desired N-terminal cysteine-containing protein fragment. The resulting apoLp-III fragment, which contained no sequence tags or tails, escaped the bacteria and accumulated in the culture medium. When cultured in M9 minimal medium, Asp1Cys apoLp-III(1-91) was produced in high yield and was the sole major protein in the culture supernatant. Ligation reactions with apoE(1-111)-MESNA yielded an engineered hybrid apolipoprotein. The results document the utility of the pelB fusion protein system for generating active N-terminal cysteine containing proteins for EPL applications.

NMR structure of a KlbA intein precursor from Methanococcus jannaschii

Certain proteins of unicellular organisms are translated as precursor polypeptides containing inteins (intervening proteins), which are domains capable of performing protein splicing. These domains, in conjunction with a single residue following the intein, catalyze their own excision from the surrounding protein (extein) in a multistep reaction involving the cleavage of two intein-extein peptide bonds and the formation of a new peptide bond that ligates the two exteins to yield the mature protein. We report here the solution NMR structure of a 186-residue precursor of the KlbA intein from Methanococcus jannaschii, comprising the intein together with N- and C-extein segments of 7 and 11 residues, respectively. The intein is shown to adopt a single, well-defined globular domain, representing a HINT (Hedgehog/Intein)-type topology. Fourteen beta-strands are arranged in a complex fold that includes four beta-hairpins and an antiparallel beta-ribbon, and there is one alpha-helix, which is packed against the beta-ribbon, and one turn of 3(10)-helix in the loop between the beta-strands 8 and 9. The two extein segments show increased disorder, and form only minimal nonbonding contacts with the intein domain. Structure-based mutation experiments resulted in a proposal for functional roles of individual residues in the intein catalytic mechanism.

Analyzing protein tyrosine phosphatases by phosphotyrosine analog integration

Reversible protein phosphorylation plays a central role in cellular signal transduction and is a focus of biomedical studies. However, it is a challenging task to study the effects of protein phosphorylation in the presence of protein phosphatase activities, especially for protein tyrosine phosphatases SHP1, SHP2 and LMW-PTP, which are themselves regulated by protein tyrosine phosphorylation. Expressed protein ligation, by combining chemical peptide synthesis with recombinant protein expression, allows for site-specific unnatural modifications of semisynthetic proteins. In this review, we describe how semisynthetic proteins were prepared to incorporate nonhydrolyzable phosphotyrosine analogs, and utilized in combination with site-directed mutagenesis and other means to elucidate regulatory mechanisms of protein tyrosine phosphatases.

Specifically Immobilised Aldo/Keto Reductase AKR1A1 Shows a Dramatic Increase in Activity Relative to the Randomly Immobilised Enzyme

The difference between site-specific and random immobilisation of the aldo/keto reductase AKR1A1 was explored. AKR1A1 was recombinantly expressed as a thioester by the intein strategy. The thioester was selectively modified with a biotin label by the expressed protein ligation method, and subsequent immobilisation on streptavidin templates was performed. Adsorption of wild-type AKR1A1 to streptavidin templates and of biotinylated AKR1A1 to uncoated templates was used to study randomly immobilised enzymes. Investigation of the kinetic parameters revealed remarkably improved activity for the site-specifically immobilised enzyme, which was comparable to that of the wild-type enzyme in solution and 60-300-fold greater than that of the randomly immobilized enzymes. Furthermore, the enzyme was surprisingly stable. No loss of activity was observed for over a week, and even after 50 days more than 35% of activity was maintained.

Purple membranes as microscaled nanopatterned biosubstrates for reversible attachment of biocomponents

One of the key challenges in the construction of complex bionanotechnological building blocks and devices is the controlled linkage and release of biomolecular components to and from a biomolecular surface. Here we report a versatile, easy and universally applicable method for the reversible assembly of protein-protein conjugates. The process is demonstrated using green fluorescent protein (GFP) and purple membranes (PM) as model compounds. GFP was reversibly bound to PM patches which served as a biomolecular model surface. Due to its size in the micrometre range PM is, as far as its Brownian diffusion is considered, like a solid surface. PMs comprising the mutated bacteriorhodopsin BR-D36C were employed, where aspartic acid in position 36 was replaced with cysteine. The introduced cysteine is accessible from the cytoplasmic side of the membrane. The cysteine group was first functionalized with a nitrilotriacetic acid group (NTA) and then, after loading with Ni, histidine-tagged GFP was bound to the chemically modified PM surface the well-known NTA-His complex. Binding and release of GFP from the PM surface was monitored by atomic force microscopy (AFM).

Protein splicing in cis and in trans

Intein-mediated protein splicing is a self-catalytic process in which the intervening intein sequence is removed from a precursor protein and the flanking extein segments are ligated with a native peptide bond. Splice junction proximal residues and internal residues within the intein direct these reactions. The identity of these residues varies in each intein, as groups of related residues populate conserved motifs. Although the basics of the four-step protein splicing pathway are known, mechanistic details are still unknown. Structural and kinetic analyses are beginning to shed some light. Several structures were reported for precursor proteins with mutations in catalytic residues, which stabilize the precursors for crystallographic study. Progress is being made despite limitations inherent in using mutated precursors. However, no uniform mechanism has emerged. Kinetic parameters were determined using conditional trans-splicing (splicing of split precursor fragments after intein reassembly). Several groups concluded that the rate of the initial acyl rearrangement step is rapid and Asn cyclization (step 3) is slow, suggesting that this latter step is rate limiting. Understanding the protein splicing pathway has allowed scientists to harness inteins for numerous applications.

Selective desulfurization of cysteine in the presence of Cys(Acm) in polypeptides obtained by native chemical ligation

Increased versatility for the synthesis of proteins and peptides by native chemical ligation requires the ability to ligate at positions other than Cys. Here, we report that Raney nickel can be used under standard conditions for the selective desulfurization of Cys in the presence of Cys(Acm). This simple and practical tactic enables the more common Xaa-Ala junctions to be used as ligation sites for the chemical synthesis of Cys-containing peptides and proteins. [reaction: see text].

Authentic interdomain communication in an RNA helicase reconstituted by expressed protein ligation of two helicase domains

RNA helicases mediate structural rearrangements of RNA or RNA-protein complexes at the expense of ATP hydrolysis. Members of the DEAD box helicase family consist of two flexibly connected helicase domains. They share nine conserved sequence motifs that are involved in nucleotide binding and hydrolysis, RNA binding, and helicase activity. Most of these motifs line the cleft between the two helicase domains, and extensive communication between them is required for RNA unwinding. The two helicase domains of the Bacillus subtilis RNA helicase YxiN were produced separately as intein fusions, and a functional RNA helicase was generated by expressed protein ligation. The ligated helicase binds adenine nucleotides with very similar affinities to the wild-type protein. Importantly, its intrinsically low ATPase activity is stimulated by RNA, and the Michaelis-Menten parameters are similar to those of the wild-type. Finally, ligated YxiN unwinds a minimal RNA substrate to an extent comparable to that of the wild-type helicase, confirming authentic interdomain communication.

Exploring protein structure and dynamics under denaturing conditions by single-molecule FRET analysis

Proteins are highly complex biopolymers, exhibiting a substantial degree of structural variability in their properly folded, native state. In the presence of denaturants, this heterogeneity is greatly enhanced, and fluctuations take place among vast numbers of folded and unfolded conformations via many different pathways. To better understand protein folding it is necessary to explore the structural and energetic properties of the folded and unfolded polypeptide chain, as well as the trajectories along which the chain navigates through its multi-dimensional conformational energy landscape. In recent years, single-molecule fluorescence spectroscopy has been established as a powerful tool in this research area, as it allows one to monitor the structure and dynamics of individual polypeptide chains in real time with atomic scale resolution using Förster resonance energy transfer (FRET). Consequently, time trajectories of folding transitions can be directly observed, including transient intermediates that may exist along these pathways. Here we illustrate the power of single-molecule fluorescence with our recent work on the structure and dynamics of the small enzyme RNase H in the presence of the chemical denaturant guanidinium chloride (GdmCl). For FRET analysis, a pair of fluorescent dyes was attached to the enzyme at specific locations. In order to observe conformational changes of individual protein molecules for up to several hundred seconds, the proteins were immobilized on nanostructured, polymer coated glass surfaces specially developed to have negligible interactions with folded and unfolded proteins. The single-molecule FRET analysis gave insight into structural changes of the unfolded polypeptide chain in response to varying the denaturant concentration, and the time traces revealed stepwise transitions in the FRET levels, reflecting conformational dynamics. Barriers in the free energy landscape of RNase H were estimated from the kinetics of the transitions.

Single-molecule fluorescence spectroscopy of protein folding

Single-molecule spectroscopy is an important new approach for studying the intrinsically heterogeneous process of protein folding. This Review illustrates how different single-molecule fluorescence techniques have improved our understanding of mechanistic aspects in protein folding, exemplified by a series of recent experiments on a small protein.

Ligation independent cloning vectors for expression of SUMO fusions

With demand increasing for the production of many different proteins for biophysical or biochemical analyses, rapid methods are needed for the cloning, expression and purification of native recombinant proteins. In particular, generic methods are required that are independent of the target gene sequence. To address this challenge we have constructed four Escherichia coli expression vectors that can be used for ligation independent cloning (LIC) of an amplified target gene sequence. These vectors represent the combinatorial pairing of two different parent vector backbones with two different affinity tags. The target gene is cloned downstream of the sequence coding for an affinity-tagged small ubiquitin related modifier (SUMO). Using enhanced green fluorescent protein (eGFP) as an example we demonstrate that the LIC procedure works with high efficiency for all four of the vectors. We also show that the resultant recombinant SUMO fusion proteins can be overexpressed in E. coli and readily isolated by standard affinity purification techniques. Importantly, the purified fusion product can be treated with recombinant SUMO hydrolase to yield a mature target protein with any residue except proline at the amino terminus. We demonstrate an application of this by generating recombinant eGFP containing a non-native amino terminal cysteine residue and using it as a substrate for expressed protein ligation (EPL). The reagents and techniques described here represent a generic method for the rapid cloning and production of a target protein, and would be appropriate for a high throughput genomic scale expression project.

Identification of the dimerisation interface of human interleukin-8 by IL-8-variants containing the photoactivatable amino acid benzoyl-phenylalanine

The three-dimensional structure of human interleukin-8 (hIL-8) was determined by the use of NMR and X-ray methodology. At high concentrations interleukin-8 and many other chemokines form a non-covalent homodimer. Several studies have been performed to investigate the relevance of the dimer on receptor activation and led to contradictory results. In order to obtain a better understanding of the dimerisation process, covalently linked homo- and heterodimers were produced by photo-induced dimerisation of hIL-8 analogues that contain the photo-activatable amino acid p-benzoyl-phenylalanine (Bpa) at different positions. Whereas the N-terminal fragment (1-54) was expressed as recombinant thioester, the C-terminal fragments (55-77) that contain Bpa either at position 65 or 74 were obtained by solid-phase peptide synthesis. The segments were combined by expressed protein ligation and led to full length IL-8 variants containing the non-proteinogenic amino acid Bpa at single positions. IP(3) activity tests showed high biological activity for the CXCR1-GFP receptor for both variants comparable to that of the native ligand. The refolded and purified ligation-products were used for dimer formation by UV-irradiation. The analysis of the reaction mixture was performed by gel-electrophoresis and mass spectrometry and showed that dimer formation of IL-8 occurred in a position dependent manner. [Bpa(74)]hIL-8 has a high tendency to form covalent dimers whereas no dimer formation was observed for the variant with Bpa at position 65. Accordingly one residue of the dimerisation interface could be identified.

Elimination of in vivo cleavage between target protein and intein in the intein-mediated protein purification systems

IMPACT is a novel protein purification system developed by New England BioLabs. This system utilizes the inducible self-cleavage activity of a protein splicing element (termed intein) to separate the target protein from the affinity intein-CBD tag without using any proteases. The IMPACT system has been widely used as an easy, one-step protein purification procedure. However, IMPACT usually produces a lower target protein yield than other protein purification systems, such as the pET system. It was found that the lower yield of the target protein, in many cases, was due to in vivo cleavage between the target protein and the intein during protein expression. Self-cleavage requires the first residue of the intein to be a cysteine with a free sulfhydryl group. In order to eliminate this in vivo auto-cleavage, we designed two single cysteine mutants in the intein protein to allow potential disulfide bond formation with the first cysteine. Therefore, no free sulfhydryl group in the first cysteine of the intein is available during protein expression. Our data indicated that the in vivo auto-cleavage during bacterial expression was completely eliminated with the intein mutation, resulting in a significant enhancement of the protein yield of the IMPACT expression system, comparable to the other high-level expression systems.

Protein semisynthesis and expressed protein ligation: chasing a protein's tail

The adaptation of native chemical ligation to protein semisynthesis has become a powerful way to address problems in the analysis of protein structure and function. In particular, the exploitation of nature's inteins in expressed protein ligation is now a standard approach in the study of proteins. Site-specific incorporation of unnatural amino acids, biophysical probes and post-translational modifications in proteins have led to new insights into enzyme mechanisms, protein folding, ion channel function, translation and signaling.

Influenza A virus protein PB1-F2: synthesis and characterization of the biologically active full length protein and related peptides

Recently the discovery of a novel 87 amino acid influenza A virus (IAV) protein, named PB1-F2, has been reported that originates from an alternative reading frame in the PB1 polymerase gene and is encoded in most of the known human IAV isolates. Using optimized protocols, full length biologically active sPB1-F2 and a number of fragments have been synthesized by following either the standard elongation SPPS method or by native chemical ligation of unprotected N- and C-terminal peptide fragments at the histidine and cysteine residues located in position 41 and 42 of the native sequence, respectively. The ligation procedure afforded the most efficient synthesis of sPB1-F2 and facilitated the generation of various mutants of sPB1-F2 from pre-synthesized peptide fragments. During the synthesis of sPB1-F2, the formation of succinimide and subsequent conversion to the piperidine derivative at the aspartic acid residue in position 23 was observed. This reaction was forestalled by applying specific modifications to the SPPS protocol. The chain-elongation SPPS protocol is optimal for producing small peptides of sPB1-F2, their derivatives and precursors for a subsequent ligation protocol, while the full length protein, mutants and labelled derivatives are more conveniently and efficiently synthesized by SPPS protocols that include native chemical ligation. The molecular identity of sPB1-F2 was confirmed by peptide mapping, mass spectrometry, N-terminal sequencing, (1)H NMR spectroscopy and Western blot analysis. The latter analysis afforded direct evidence of the inherent tendency of sPB1-F2 to undergo oligomerization, a phenomenon observed both for full length sPB1-F2 and fragments thereof, as well as for its full length viral counterpart. Our synthesis protocols open the field for multiple biological and structural studies on sPB1-F2 that, similar to the molecule expressed in an IAV context, induces apoptosis and interacts with membranes in vitro and in vivo, as shown in previous studies.

Chemical synthesis of proteins

Proteins have become accessible targets for chemical synthesis. The basic strategy is to use native chemical ligation, Staudinger ligation, or other orthogonal chemical reactions to couple synthetic peptides. The ligation reactions are compatible with a variety of solvents and proceed in solution or on a solid support. Chemical synthesis enables a level of control on protein composition that greatly exceeds that attainable with ribosome-mediated biosynthesis. Accordingly, the chemical synthesis of proteins is providing previously unattainable insight into the structure and function of proteins.

Isosteric replacement of sulfur with other chalcogens in peptides and proteins

The review addresses the functional and structural properties of the two series of chalcogen analogues of amino acids in peptides and proteins, the methionine and the serine/cysteine series, and discusses the synthesis of the related selenium/tellurium analogues as well as their use in peptide synthesis and protein expression. Advances in synthetic methodologies and recombinant technologies and their combined applications in native and expressed protein ligation allows the isomorphous character of selenium- and tellurium-containing amino acids to be exploited for production of heavy metal mutants of proteins and thus to facilitate the phasing problem in x-ray crystallography. In addition, selenocysteine has been recognized as an ideal tool for the production of selenoenzymes with new catalytic activities. Moreover, the fully isomorphous character of disulfide replacement with diselenide is well suited to increase the robustness of cystine frameworks in cystine-rich peptides and proteins and for the de novo design of even non-native cystine frameworks by exploiting the highly negative redox potential of selenols.

Protein Splicing Mechanisms and Applications

Inteins are protein splicing elements that employ standard enzyme strategies to excise themselves from precursor proteins and ligate the surrounding sequences (exteins). The protein splicing pathway consists of four nucleophilic displacements directed by the intein plus the first C-extein residue. The intein active site(s) are formed by folding of the intein within the precursor, which brings together the splice junctions and internal intein residues that assist catalysis. Inteins with non-canonical catalytic residues splice by modified pathways. Understanding intein proteolytic cleavage and ligation activities has led to the development of many novel applications in the fields of protein engineering, enzymology, microarray production, target detection and activation of transgenes in plants. Recent advances include intein-mediated attachment of proteins to solid supports for microarray or western blot analysis, linking nucleic acids to proteins and controllable splicing, which converts inteins into molecular switches.

Chemical Synthesis of Triple-Labelled Three-Helix Bundle Binding Proteins for Specific Fluorescent Detection of Unlabelled Protein

Site-specifically triple-labelled three-helix bundle affinity proteins (affibody molecules) have been produced by total chemical synthesis. The 58 aa affinity proteins were assembled on an automated peptide synthesizer, followed by manual on-resin incorporation of three different reporter groups. An orthogonal protection strategy was developed for the site-specific introduction of 5-(2-aminethylamino)-1-naphthalenesulfonic acid (EDANS) and 6-(7-nitrobenzofurazan-4-ylamino)-hexanoic acid (NBDX), constituting a donor/acceptor pair for fluorescence resonance energy transfer (FRET), and a biotin moiety, used for surface immobilization. Circular dichroism and biosensor studies of the synthetic proteins and their recombinant counterparts revealed that the synthetic proteins were folded and retained their binding specificities. The biotin-conjugated protein could be immobilized onto a streptavidin surface without loss of activity. The synthetic, doubly fluorescent-labelled affinity proteins were shown to function as fluorescent biosensors in an assay for the specific detection of unlabelled human IgG and IgA.

Proteomic analysis for the early detection and rational treatment of cancer--realistic hope?

Proteomics is an emerging field in medical science focused on the library of proteins specific to a given biosystem, the proteome, and understanding relationships therein. This field incorporates technologies that can be applied to serum and tissue in order to extract important biological information to aid clinicians and scientists in understanding the dynamic biology of their system of interest, such as a patient with cancer. These tools include laser capture microdissection, tissue lysate arrays and mass spectrometry approaches. These new technologies are more potent coupled with advanced bioinformatics analysis. They are used to characterize the content of, and changes in, the proteome induced by physiological changes, benign and pathologic. The application of these tools has assisted in the discovery of new biomarkers and may lead to new diagnostic tests and improvements in therapeutics. These tools additionally can provide a molecular characterization of cancers, which may allow for individualized molecular therapy. Understanding the basic concepts and tools used will illustrate how best to apply these technologies for patient benefit for the early detection of cancer and improved patient care.

Preparation of protected peptidyl thioester intermediates for native chemical ligation by Nalpha-9-fluorenylmethoxycarbonyl (Fmoc) chemistry: considerations of side-chain and backbone anchoring strategies, and compatible protection for N-terminal cysteine*,+

Native chemical ligation has proven to be a powerful method for the synthesis of small proteins and the semisynthesis of larger ones. The essential synthetic intermediates, which are C-terminal peptide thioesters, cannot survive the repetitive piperidine deprotection steps of N(alpha)-9-fluorenylmethoxycarbonyl (Fmoc) chemistry. Therefore, peptide scientists who prefer to not use N(alpha)-t-butyloxycarbonyl (Boc) chemistry need to adopt more esoteric strategies and tactics in order to integrate ligation approaches with Fmoc chemistry. In the present work, side-chain and backbone anchoring strategies have been used to prepare the required suitably (partially) protected and/or activated peptide intermediates spanning the length of bovine pancreatic trypsin inhibitor (BPTI). Three separate strategies for managing the critical N-terminal cysteine residue have been developed: (i) incorporation of N(alpha)-9-fluorenylmethoxycarbonyl-S-(N-methyl-N-phenylcarbamoyl)sulfenylcysteine [Fmoc-Cys(Snm)-OH], allowing creation of an otherwise fully protected resin-bound intermediate with N-terminal free Cys; (ii) incorporation of N(alpha)-9-fluorenylmethoxycarbonyl-S-triphenylmethylcysteine [Fmoc-Cys(Trt)-OH], generating a stable Fmoc-Cys(H)-peptide upon acidolytic cleavage; and (iii) incorporation of N(alpha)-t-butyloxycarbonyl-S-fluorenylmethylcysteine [Boc-Cys(Fm)-OH], generating a stable H-Cys(Fm)-peptide upon cleavage. In separate stages of these strategies, thioesters are established at the C-termini by selective deprotection and coupling steps carried out while peptides remain bound to the supports. Pilot native chemical ligations were pursued directly on-resin, as well as in solution after cleavage/purification.

Cyanogen Bromide Cleavage Generates Fragments Suitable for Expressed Protein and Glycoprotein Ligation

Herein cyanogen bromide is employed for the efficient production of N-terminal cysteine containing protein fragments for expressed protein ligation (EPL) from polyhistidine-tagged precursors. We provide three examples of efficient CNBr cleavage of fragments of the glycoprotein erythropoietin that can be ligated with peptides or glycopeptide mimetics potentially giving rise to semisynthetic glycoprotein therapeutics.