Work related shoulder disorders: quantitative exposure-response relations with reference to arm posture

Evaluation of upper body kinematics and muscle activity during milking attachment task

The objective of the study was to evaluate the effects of udder height on upper body kinematics and muscle activity during a simulated attachment task in a parallel parlor set up, and the effects of udder access method (back or side) on the task biomechanics. Twenty males performed the task under conditions that simulated three udder heights and two udder access methods. The muscular load and kinematics during the task confirmed that milking is a physically demanding task. Trunk flexion angle increased with decreasing udder height, and the erector spinae activation was higher when the udder was below shoulder height compared to at or above. Compared to accessing the udder from side of the cow (herringbone parlor style), accessing from behind (Parallel parlor style) was associated with lower trunk flexion, greater shoulder horizontal adduction, lower shoulder elevation, and greater anterior deltoid activation. Milking in herringbone parlor style and with the udder at or above shoulder level may help reduce strain on the trunk/neck.

Work-related risk factors for specific shoulder disorders: a systematic review and meta-analysis

The objective of this systematic review and meta-analysis is to examine which work-related risk factors are associated with specific soft tissue shoulder disorders. We searched the electronic databases of Medline and Embase for articles published between 2009 and 24 March 2016 and included the references of a systematic review performed for the period before 2009. Primary cross-sectional and longitudinal studies were included when outcome data were described in terms of clinically assessed soft tissue shoulder disorders and at least two levels of work-related exposure were mentioned (exposed vs less or non-exposed). Two authors independently selected studies, extracted data and assessed study quality. For longitudinal studies, we performed meta-analyses and used GRADE (Grades of Recommendations, Assessment, Development and Evaluation) to assess the evidence for the associations between risk factors and the onset of shoulder disorders. Twenty-seven studies met the inclusion criteria. In total, 16 300 patients with specific soft tissue shoulder disorders from a population of 2 413 722 workers from Denmark, Finland, France, Germany and Poland were included in the meta-analysis of one case-control and six prospective cohort studies. This meta-analysis revealed moderate evidence for associations between shoulder disorders and arm-hand elevation (OR=1.9, 95% CI 1.47 to 2.47) and shoulder load (OR=2.0, 95% CI 1.90 to 2.10) and low to very low evidence for hand force exertion (OR=1.5, 95% CI 1.25 to 1.87), hand-arm vibration (OR=1.3, 95% CI 1.01 to 1.77), psychosocial job demands (OR=1.1, 95% CI 1.01 to 1.25) and working together with temporary workers (OR=2.2, 95% CI 1.2 to 4.2). Low-quality evidence for no associations was found for arm repetition, social support, decision latitude, job control and job security. Moderate evidence was found that arm-hand elevation and shoulder load double the risk of specific shoulder disorders. Low to very-low-quality evidence was found for an association between hand force exertion, hand-arm vibration, psychosocial job demands and working together with temporary workers and the incidence of specific shoulder disorders.

Validity of a small low-cost triaxial accelerometer with integrated logger for uncomplicated measurements of postures and movements of head, upper back and upper arms

Repetitive work and work in constrained postures are risk factors for developing musculoskeletal disorders. Low-cost, user-friendly technical methods to quantify these risks are needed. The aims were to validate inclination angles and velocities of one model of the new generation of accelerometers with integrated data loggers against a previously validated one, and to compare meaurements when using a plain reference posture with that of a standardized one. All mean (n = 12 subjects) angular RMS-differences in 4 work tasks and 4 body parts were <2.5° and all mean median angular velocity differences <5.0 °/s. The mean correlation between the inclination signal-pairs was 0.996. This model of the new generation of triaxial accelerometers proved to be comparable to the validated accelerometer using a data logger. This makes it well-suited, for both researchers and practitioners, to measure postures and movements during work. Further work is needed for validation of the plain reference posture for upper arms.

Working postures and physical activity among registered nurses

Nurses report a high prevalence of musculoskeletal discomfort, particularly of the low back and neck/shoulder. This study characterized the full-shift upper arm and trunk postures and movement velocities of registered nurses using inertial measurement units (IMUs). Intensity of occupational physical activity (PA) was also ascertained using a waist-worn PA monitor and using the raw acceleration data from each IMU. Results indicated that nurses spent a relatively small proportion of their work time with the arms or trunk in extreme postures, but had few opportunities for rest and recovery in comparison to several other occupational groups. Comparisons between nurses in different PA groups suggested that using a combination of accelerometers secured to several body locations may provide more representative estimates of physical demands than a single, waist-worn PA monitor. The findings indicate a need for continued field-based research with larger sample sizes to facilitate the development of maximally effective intervention strategies.

Subacromial shoulder disorders among baggage handlers: an observational cohort study

PURPOSE

To assess the influence of cumulative employment as baggage handler on the risk of incident subacromial shoulder disorders. Baggage handling is characterized by repetitive work primarily consisting of heavy lifting in awkward positions and time pressure.

METHODS

This cohort study is based on the Copenhagen Airport Cohort consisting of unskilled men with employment at Copenhagen Airport and unskilled men with employment in other firms in the Greater Copenhagen area during the period 1990-2012. Only men were included. We followed the cohort in the National Patient Register and Civil Registration System. The primary exposure was cumulative years of employment as a baggage handler, and the primary outcome was diagnoses and surgical treatment of subacromial shoulder disorders.

RESULTS

The cohort contained 3396 baggage handlers and 63,909 workers in the reference group. Baggage handlers with longer cumulative years of employment had higher incidence compared to baggage handlers with shorter employment; for example, baggage handlers with 10-19 years of employment had incidence rate ratio of 2.07 (95 % confidence interval, 1.27-3.38) compared to baggage handlers with less than 3 years of employment. Spline regression showed an increase in incidence within the first few years after employment whereupon the increased risk remained constant for longer employment. Baggage handlers had increased incidence in younger ages than the reference population.

CONCLUSIONS

In this large cohort study, we found increased incidence of subacromial shoulder disorders for workers with longer cumulative years of employment. These results support that long-term lifting in awkward positions and time pressure influences the risk of subacromial shoulder disorders.

Evaluation of four sensor locations for physical activity assessment

Direct measurements of physical activity (PA) obtained with inertial measurement units (IMUs) secured to the upper arms and trunk of 36 registered nurses working a full shift were compared to measurements obtained with a commercially-available PA monitor (ActiGraph wGT3X-BT) worn at the waist. Raw accelerations from each device were summarized into PA counts/min and metabolic equivalent (METs) categories using standard definitions. Differences between measurements were examined using repeated measures one-way analyses of variance (ANOVA) and agreement was assessed using Bland-Altman plots. Statistically significant differences were observed between all sensor locations for all PA summary metrics except for between the left and right arm for percentages of work time in the light and moderate counts/min categories. Bland-Altman plots suggested limited agreement between measurements obtained with the IMUs and measurements obtained with the wGT3X-BT waist-worn PA monitor. Results indicate that PA measurements vary substantially based on sensor location.

The Influence of Hand Location and Force Direction on Shoulder Muscular Activity in Females During Nonsagittal Multidirectional Overhead Exertions

OBJECTIVE

We examined interactions of overhead work location and direction of force application on shoulder muscular activity.

BACKGROUND

Overhead work tasks are common occupational stressors. Previous research has quantified influences of overhead work spatial placement and different force application directions but typically separately or exclusively for tasks done in the median plane.

METHOD

Twenty female participants exerted 40 N of force in six directions (forward/backward, upward/downward, left/right) 150 cm off the floor while seated. An asymmetric pattern of 14 work locations spaced 15 cm centered directly overhead were evaluated.

RESULTS

Force direction and work location strongly influenced mean muscle activity (F = 559, p < .01). Interaction effects existed between force direction and hand location in the transverse plane (F = 21, p < .01), with increases as high as 49% in normalized mean muscle activity.

CONCLUSION

Backward exertions produced the highest mean overall muscle activity across hand force directions, exceeding 30% maximum voluntary isometric exertion (MVE) across work locations, with higher activation of anterior deltoid, biceps, infraspinatus, supraspinatus, and upper and lower trapezius. Downward exertions had the lowest mean overall activity, with <10% MVE across work locations. Altered (up to 47%) muscular activity occurred as exertions moved laterally from the origin, and increasingly forward hand positions generally yielded decreased mean overall activity for most force directions.

APPLICATION

This study provides previously unavailable submaximal shoulder muscular activity data for a wide range of overhead tasks. As such, it enables novel work design considerations that include modifying existing overhead elements to reduce or redistribute associated muscular demands.

Differences between work and leisure in temporal patterns of objectively measured physical activity among blue-collar workers

Background

Leisure time physical activity (LTPA) is generally associated with favorable cardiovascular health outcomes, while occupational physical activity (OPA) shows less clear, or even opposite, cardiovascular effects. This apparent paradox is not sufficiently understood, but differences in temporal patterns of OPA and LTPA have been suggested as one explanation. Our aim was to investigate the extent to which work and leisure (non-occupational time) differ in temporal activity patterns among blue-collar workers, and to assess the modification of these patterns by age and gender.

Methods

This study was conducted on a cross-sectional sample of male (n = 108) and female (n = 83) blue-collar workers, aged between 21 and 65 years. Physical activity and sedentary behavior were assessed using accelerometers (Actigraph GT3X+) worn on the thigh and trunk for four consecutive days. Temporal patterns of OPA and LTPA were retrieved using Exposure Variation Analysis (EVA), and expressed in terms of percentage of work and leisure time spent in uninterrupted periods of different durations (<1 min, 1–5 min, 5–10 min, 10–30 min, 30–60 min and > 60 min) of sitting, standing, and walking. Repeated measures ANOVA and linear regression analyses were used to test a) possible differences between OPA and LTPA in selected EVA derivatives, and b) the modification of these differences by age and gender.

Results

OPA showed a larger percentage time walking in brief (<5 min) periods [mean (SD): 33.4 % (12.2)], and less time in prolonged (>30 min) sitting [7.0 % (9.3)] than LTPA [walking 15.4 % (5.0); sitting 31.9 % (15.3)], even after adjustment for the difference between work and leisure in total time spent in each activity type. These marked differences in the temporal pattern of OPA and LTPA were modified by gender, but not age.

Conclusion

We found that the temporal patterns of OPA and LTPA among blue-collar workers were markedly different even after adjustment for total physical activity time, and that this difference was modified by gender. We recommend using EVA derivatives in future studies striving to disentangle the apparent paradoxical cardiovascular effect of physical activity at work and during leisure.

An evidence-based review of current perceptions with regard to the subacromial space in shoulder impingement syndromes: Is it important and what influences it?

BACKGROUND

Reduction of the subacromial space as a mechanism in the etiology of shoulder impingement syndromes is debated. Although a reduction in this space is associated with shoulder impingement syndromes, it is unclear if this observation is cause or consequence.

METHOD

The purposes of this descriptive review are to provide a broad perspective on the current perceptions with regard to the pathology and pathomechanics of subacromial and internal impingement syndromes, consider the role of the subacromial space in impingement syndromes, describe the intrinsic and extrinsic mechanisms considered to influence the subacromial space, and critique the level of evidence supporting these concepts.

FINDING

Based on the current evidence, the hypothesis that a reduction in subacromial space is an extrinsic cause of impingement syndromes is not conclusively established and the evidence permits no conclusion.

INTERPRETATION

If maintenance of the subacromial space is important in impingement syndromes regardless of whether it is a cause or consequence, research exploring the correlation between biomechanical factors and the subacromial space, using the later as the outcome measure, would be beneficial.

Partly visible periods in posture observation from video: prevalence and effect on summary estimates of postures in the job

This paper investigated the extent to which observers rated clearly visible postures on video differently from partly visible postures, and whether visibility affected full-shift posture summaries. Trunk and upper arm postures were observed from 10,413 video frames representing 80 shifts of baggage handling; observers reported postures as fully or only partly visible. Postures were summarized for each shift into several standard metrics using all available data, only fully visible frames, or only partly visible frames. 78% of trunk and 70% of upper arm postural observations were inferred. When based on all data, mean and 90th percentile trunk postures were 1.8° and 5.6° lower, respectively, than when based only on fully visible situations. For the arm; differences in mean and 90th percentile were 0.7° and 8.2°. Daily posture summaries were significantly influenced by whether partly visible postures are included or not.

Proteomics perspectives in rotator cuff research: a systematic review of gene expression and protein composition in human tendinopathy

BACKGROUND

Rotator cuff tendinopathy including tears is a cause of significant morbidity. The molecular pathogenesis of the disorder is largely unknown. This review aimed to present an overview of the literature on gene expression and protein composition in human rotator cuff tendinopathy and other tendinopathies, and to evaluate perspectives of proteomics--the comprehensive study of protein composition--in tendon research.

MATERIALS AND METHODS

We conducted a systematic search of the literature published between 1 January 1990 and 18 December 2012 in PubMed, Embase, and Web of Science. We included studies on objectively quantified differential gene expression and/or protein composition in human rotator cuff tendinopathy and other tendinopathies as compared to control tissue.

RESULTS

We identified 2199 studies, of which 54 were included; 25 studies focussed on rotator cuff or biceps tendinopathy. Most of the included studies quantified prespecified mRNA molecules and proteins using polymerase chain reactions and immunoassays, respectively. There was a tendency towards an increase of collagen I (11 of 15 studies) and III (13 of 14), metalloproteinase (MMP)-1 (6 of 12), -9 (7 of 7), -13 (4 of 7), tissue inhibitor of metalloproteinase (TIMP)-1 (4 of 7), and vascular endothelial growth factor (4 of 7), and a decrease in MMP-3 (10 of 12). Fourteen proteomics studies of tendon tissues/cells failed inclusion, mostly because they were conducted in animals or in vitro.

CONCLUSIONS

Based on methods, which only allowed simultaneous quantification of a limited number of prespecified mRNA molecules or proteins, several proteins appeared to be differentially expressed/represented in rotator cuff tendinopathy and other tendinopathies. No proteomics studies fulfilled our inclusion criteria, although proteomics technologies may be a way to identify protein profiles (including non-prespecified proteins) that characterise specific tendon disorders or stages of tendinopathy. Thus, our results suggested an untapped potential for proteomics in tendon research.

Work with prolonged arm elevation as a risk factor for shoulder pain: a longitudinal study among young adults

This prospective study aimed at examining if work with prolonged arm elevation predicts shoulder pain among 41 young adults in their first years of working life. Fifteen hairdressers, 15 electricians, 5 students and 6 with various work were followed over a 2.5-year period (2006/7-2009). Arm elevation was measured with inclinometers during a full working day at baseline. Shoulder pain was reported at baseline and twice in the follow-up period. Data were analyzed by generalized estimating equations (GEE-analysis), stratified by gender and adjusted for time, mechanical workload, work demand, physical activity, tobacco use and prior shoulder pain. Work with prolonged arm elevation with angles >60° and >90° were associated with shoulder pain among women. Even though the shoulder pain levels are low the study suggests work with arms elevated as an early work-related risk factor among women, and indicates the importance of early prevention strategies.

Is what you see what you get? Standard inclinometry of set upper arm elevation angles

Previous research suggests inclinometers (INC) underestimate upper arm elevation. This study was designed to quantify possible bias in occupationally relevant postures, and test whether INC performance could be improved using calibration. Participants were meticulously positioned in set arm flexion and abduction angles between 0° and 150°. Different subject-specific and group-level regression models comprising linear and quadratic components describing the relationship between set and INC-registered elevation were developed using subsets of data, and validated using additional data. INC measured arm elevation showed a downward bias, particularly above 60°. INC data adjusted using the regression models were superior to unadjusted data; a subject-specific, two-point calibration based on measurements at 0° and 90° gave results closest to the 'true' set angles. Thus, inclinometer measured arm elevation data required calibration to arrive at 'true' elevation angles. Calibration to a common measurement scale should be considered when comparing arm elevation data collected using different methods.

Bias and power in group-based epidemiologic studies of low-back pain exposure and outcome--effects of study size and exposure measurement efforts

OBJECTIVES

Exposure-outcome studies, for instance on work-related low-back pain (LBP), often classify workers into groups for which exposures are estimated from measurements on a sample of workers within or outside the specific study. The present study investigated the influence on bias and power in exposure-outcome associations of the sizes of the total study population and the sample used to estimate exposures.

METHODS

At baseline, lifting, trunk flexion, and trunk rotation were observed for 371 of 1131 workers allocated to 19 a-priori defined occupational groups. LBP (dichotomous) was reported by all workers during 3 years of follow-up. All three exposures were associated with LBP in this parent study (P < 0.01). All 21 combinations of n = 10, 20, 30 workers per group with an outcome, and k = 1, 2, 3, 5, 10, 15, 20 workers actually being observed were investigated using bootstrapping, repeating each combination 10000 times. Odds ratios (OR) with P values were determined for each of these virtual studies. Average OR and statistical power (P < 0.05 and P < 0.01) was determined from the bootstrap distributions at each (n, k) combination.

RESULTS

For lifting and flexed trunk, studies including n ≥ 20 workers, with k ≥ 5 observed, led to an almost unbiased OR and a power >0.80 (P level = 0.05). A similar performance required n ≥ 30 workers for rotated trunk. Small numbers of observed workers (k) resulted in biased OR, while power was, in general, more sensitive to the total number of workers (n).

CONCLUSIONS

In epidemiologic studies using a group-based exposure assessment strategy, statistical performance may be sufficient if outcome is obtained from a reasonably large number of workers, even if exposure is estimated from only few workers per group.

Sex differences in task distribution and task exposures among Danish house painters: an observational study combining questionnaire data with biomechanical measurements

Objectives

Sex differences in occupational biomechanical exposures may be part of the explanation why musculoskeletal complaints and disorders tend to be more common among women than among men. We aimed to determine possible sex differences in task distribution and task-specific postures and movements of the upper extremities among Danish house painters, and to establish sex-specific task exposure matrices.

Methods

To obtain task distributions, we sent out a questionnaire to all members of the Painters' Union in Denmark (N = 9364), of whom 53% responded. Respondents reported their task distributions in a typical week. To obtain task exposures, postures and movements were measured in 25 male and 25 female house painters for one whole working day per person. We used goniometers on the wrists, and inclinometers on the forehead and the upper arms. Participants filled in a logbook allowing task-specific exposures to be identified. Percentiles and % time with non-neutral postures were used to characterise postures. Velocity, range of motion, repetitiveness, and variation were used as measures of movement. Cochran-Mantel-Haenszel statistics and unpaired double-sided t-tests with post-hoc Bonferroni correction were used to evaluate sex differences.

Results

Statistically significant (p<0.05) sex differences were revealed in task proportions, but the proportions differed by less than 4%. For task exposures, no statistically significant sex differences were found.

Conclusions

Only minor sex differences were found in task distribution and task exposures regarding postures and movements among Danish house painters. Sex-specific task exposure matrices were established.

A Comparison of Examination Equipment Used During Common Clinical Ophthalmologic Tasks

Background

Ophthalmologists report a high prevalence of work-related musculoskeletal symptoms, particularly of the neck and shoulders. Improving the design of equipment used in the clinical environment may reduce exposures to physical risk factors (e.g., sustained muscular exertions and non-neutral postures) associated with neck and shoulder pain among ophthalmologists.

Purpose

To compare estimates of neck and shoulder muscle activity and upper arm posture during use of conventional and alternative examination equipment common in clinical ophthalmologic practice.

Methods

Fifteen ophthalmologists performed one mock clinical examination using conventional equipment and one mock clinical examination using alternative equipment with the potential to reduce exposure to sustained muscular exertions and non-neutral upper arm postures. The alternative equipment included a slit-lamp biomicroscope with inclined viewing oculars, adjustable elbow supports, and a wider table-top with more room for supporting the arms in comparison to the conventional slit-lamp biomicroscope. A wireless binocular indirect ophthalmoscope was also evaluated that had a more even weight distribution than the conventional design. Measurements of upper trapezius and anterior deltoid muscle activity, upper arm posture, and perceived usability were used to compare the conventional and alternative equipment.

Results

In comparison to the conventional slit lamp biomicroscope, the alternative slit lamp biomicroscope led to (i) 12% to 13% reductions in upper trapezius muscle activity levels, (ii) a 9% reduction in left anterior deltoid muscle activity levels, and (iii) a 15% reduction in the percentage of work time spent with the left upper arm elevated in positions greater than 60°. In addition, participants rated the comfort and adjustability of both the alternative slit lamp biomicroscope and binocular indirect ophthalmoscope more favorably than the conventional equipment.

Conclusions

The results suggest that the alternative slit-lamp biomicroscope may help to reduce overall muscular demands and non-neutral postures of the neck and shoulder region among ophthalmologists.

The size and structure of arm movement variability decreased with work pace in a standardised repetitive precision task

Increased movement variability has been suggested to reduce the risk of developing musculoskeletal disorders caused by repetitive work. This study investigated the effects of work pace on arm movement variability in a standardised repetitive pipetting task performed by 35 healthy women. During pipetting at slow and fast paces differing by 15%, movements of arm, hand and pipette were tracked in 3D, and used to derive shoulder and elbow joint angles. The size of cycle-to-cycle motor variability was quantified using standard deviations of several kinematics properties, while the structure of variability was quantified using indices of sample entropy and recurrence quantification analysis. When pace increased, both the size and structure of motor variability in the shoulder and elbow decreased. These results suggest that motor variability drops when repetitive movements are performed at increased paces, which may in the long run lead to undesirable outcomes such as muscle fatigue or overuse.

Data processing costs for three posture assessment methods

Background

Data processing contributes a non-trivial proportion to total research costs, but documentation of these costs is rare. This paper employed a priori cost tracking for three posture assessment methods (self-report, observation of video, and inclinometry), developed a model describing the fixed and variable cost components, and simulated additional study scenarios to demonstrate the utility of the model.

Methods

Trunk and shoulder postures of aircraft baggage handlers were assessed for 80 working days using all three methods. A model was developed to estimate data processing phase costs, including fixed and variable components related to study planning and administration, custom software development, training of analysts, and processing time.

Results

Observation of video was the most costly data processing method with total cost of € 30,630, and was 1.2-fold more costly than inclinometry (€ 26,255), and 2.5-fold more costly than self-reported data (€ 12,491). Simulated scenarios showed altering design strategy could substantially impact processing costs. This was shown for both fixed parameters, such as software development and training costs, and variable parameters, such as the number of work-shift files processed, as well as the sampling frequency for video observation. When data collection and data processing costs were combined, the cost difference between video and inclinometer methods was reduced to 7%; simulated data showed this difference could be diminished and, even, reversed at larger study sample sizes. Self-report remained substantially less costly under all design strategies, but produced alternate exposure metrics.

Conclusions

These findings build on the previously published data collection phase cost model by reporting costs for post-collection data processing of the same data set. Together, these models permit empirically based study planning and identification of cost-efficient study designs.

Cost-efficient measurement strategies for posture observations based on video recordings

Assessment of working postures by observation is a common practice in ergonomics. The present study investigated whether monetary resources invested in a video-based posture observation study should preferably be spent in collecting many video recordings of the work and have them observed once by one observer, or in having multiple observers rate postures repeatedly from fewer videos. The study addressed this question from a practitioner's perspective by focusing two plausible scenarios: documenting the mean exposure of one individual, and of a specific occupational group. Using a data set of observed working postures among hairdressers, empirical values of posture variability, observer variability, and costs for recording and observing one video were entered into equations expressing the total cost of data collection and the information (defined as 1/SD) provided by the resulting estimates of two variables: percentage time with the arm elevated <15° and >90°. Sixteen measurement strategies involving 1-4 observers repeating their posture ratings 1-4 times were examined for budgets up to €2000. For both posture variables and in both the individual and group scenario, the most cost-efficient strategy at any specific budget was to engage 3-4 observers and/or having observer(s) rate postures multiple times each. Between 17% and 34% less information was produced when using the commonly practiced approach of having one observer rate a number of video recordings one time each. We therefore recommend observational posture assessment to be based on video recordings of work, since this allows for multiple observations; and to allocate monetary resources to repeated observations rather than many video recordings.

Occupational posture exposure among construction electricians

The aim of this study is to record, objectively describe and compare working postures of Brazilian and Norwegian construction electricians. Postures of the upper arms, head, and neck during work and breaks were quantified by means of inclinometry for a representative sample of 12 Brazilian and 12 Norwegian electricians in the construction industry during a full work-shift. Despite that differences were found between specific work-related factors, Brazilian and Norwegian workers revealed a high and very similar level and pattern of postures for all evaluated body regions, suggesting that results could be extrapolated to other electricians. Upper arm elevation was high and similar for both groups and head flexion and extension was pronounced compared to other occupations. Thus, extreme postures were identified for construction electricians in both countries, with similar exposure pattern also for defined tasks (planning, support and wiredraw), suggesting that this job is risky regardless organizational differences.

Are posture data from simulated tasks representative of field conditions? Case study for overhead electric utility workers

Many ergonomics studies are conducted in laboratory-simulated work environments to assess risks for the development of musculoskeletal disorders under more controlled conditions. However, the simulated conditions could be of questionable validity with respect to reproduction of field conditions involving risk factors. The objective of this study was to verify whether the postures recorded for neck extension/flexion and upper arm elevation of overhead electric utility workers in a simulated environment were similar to those recorded in a field environment. Of the three frequently performed tasks analysed, two presented similar exposure in both conditions. However, differences were identified for a more complex task (relay replacement). These results suggest that simulated tasks may be more representative for more standardised tasks. This may indicate that researchers investigating risks should avoid simplifying complex tasks when reproducing field posture exposure in laboratories, since omitting extra subtasks may lead to an inaccurate reproduction of field exposure. Practitioner Summary: Studies comparing results from field and simulated environments are necessary to evaluate to what degree postural exposure reproduced in laboratory is representative of the exposure occurring in real work situations. This is particularly relevant for tasks involving training in simulated environment due to safety constraints.

Alternatives to lifting concrete masonry blocks onto rebar: biomechanical and perceptual evaluations

This study examined the use of and barriers to H-block and high lift grouting, two alternatives to lifting concrete masonry blocks onto vertical rebar. Peak and cumulative shoulder motions were evaluated, as well as adoption barriers: H-block cost and stakeholder perceptions. Results indicated that using the alternatives significantly decreased peak shoulder flexion (p < 0.001). A case study indicated that building cost was higher with H-block, but the difference was less than 2% of the total cost. Contractors and specifiers reported important differences in perceptions, work norms, and material use and practices. For example, 48% of specifiers reported that use of high lift grouting was the contractor's choice, while 28% of contractors thought it must be specified. Use of H-block or high-lift grouting should be considered as methods to reduce awkward upper extremity postures. Cost and stakeholders' other perceptions present barriers that are important considerations when developing diffusion strategies for these alternatives.

PRACTITIONER SUMMARY

This study provides information from several perspectives about ergonomic controls for a high risk bricklaying task, which will benefit occupational safety experts, health professionals and ergonomists. It adds to the understanding of shoulder stresses, material cost and stakeholder perceptions that will contribute to developing effective diffusion strategies.

Accuracy and precision of variance components in occupational posture recordings: a simulation study of different data collection strategies

BACKGROUND

Information on exposure variability, expressed as exposure variance components, is of vital use in occupational epidemiology, including informed risk control and efficient study design. While accurate and precise estimates of the variance components are desirable in such cases, very little research has been devoted to understanding the performance of data sampling strategies designed specifically to determine the size and structure of exposure variability. The aim of this study was to investigate the accuracy and precision of estimators of between-subjects, between-days and within-day variance components obtained by sampling strategies differing with respect to number of subjects, total sampling time per subject, number of days per subject and the size of individual sampling periods.

METHODS

Minute-by-minute values of average elevation, percentage time above 90° and percentage time below 15° were calculated in a data set consisting of measurements of right upper arm elevation during four full shifts from each of 23 car mechanics. Based on this parent data, bootstrapping was used to simulate sampling with 80 different combinations of the number of subjects (10, 20), total sampling time per subject (60, 120, 240, 480 minutes), number of days per subject (2, 4), and size of sampling periods (blocks) within days (1, 15, 60, 240 minutes). Accuracy (absence of bias) and precision (prediction intervals) of the variance component estimators were assessed for each simulated sampling strategy.

RESULTS

Sampling in small blocks within days resulted in essentially unbiased variance components. For a specific total sampling time per subject, and in particular if this time was small, increasing the block size resulted in an increasing bias, primarily of the between-days and the within-days variance components. Prediction intervals were in general wide, and even more so at larger block sizes. Distributing sampling time across more days gave in general more precise variance component estimates, but also reduced accuracy in some cases.

CONCLUSIONS

Variance components estimated from small samples of exposure data within working days may be both inaccurate and imprecise, in particular if sampling is laid out in large consecutive time blocks. In order to estimate variance components with a satisfying accuracy and precision, for instance for arriving at trustworthy power calculations in a planned intervention study, larger samples of data will be required than for estimating an exposure mean value with a corresponding certainty.

Full shift arm inclinometry among dairy parlor workers: a feasibility study in a challenging work environment

Over the last 20 years, the US dairy industry has experienced a significant transformation from small farm operations to an industrialization of the milking process. This transformation has resulted in improvements in process efficiency and product quality. Milking tasks in large-herd parlors are highly-repetitive involving awkward postures and high muscle loads of the upper extremity. Field-based direct measures of physical exposures have been limited in challenging work settings such as dairies. This study evaluated full-shift exposures of posture and motion of the upper extremity among large-herd parlor milkers using wireless inclinometry. Results suggest large-herd parlor workers may be exposed to high exposure levels (posture, movement velocity, repetition, and inadequate rest) associated with the development of shoulder pathology. Compared to other high-risk occupations involving shoulder-intensive work, parlor workers may have higher exposure levels. These findings warrant the need for continued field-based research with larger sample sizes to facilitate the development of cost-effective intervention strategies.

Exposure to a workday environment results in an increase in anterior tilting of the scapula in dental hygienists with greater employment experience

BACKGROUND

Dental hygienists suffer a high incidence of shoulder pathology that seems to increase with job longevity. It has been hypothesized that occupational injuries could be due to local muscle fatigue caused by repetitive low level work and awkward and constrained working postures. In the laboratory, scapular kinematics can be temporarily altered using fatiguing protocols. It is unknown whether or not workday fatigue causes changes to scapular kinematics. The aim of this study was to examine if changes in scapular tilt and rotation occurs after a workday in dental hygienists.

METHODS

The pre and post workday scapular kinematics were recorded from dental hygienists using an electromagnetic tracking system. All data were recorded within the place of employment of the dental hygienist.

RESULTS

Following the workday, there was significantly more scapular anterior tilt in dental hygienists (P<0.05); however, no changes were found for upward or internal rotation. Greater kinematic differences were found for hygienists with greater job longevity.

INTERPRETATION

The increase in scapular anterior tilting could be due to post workday fatigue. Anterior tilting of the scapula may have an influence on the development of subacromial impingement syndrome. Hygienists with greater duration of work experience may be at greater risk for developing shoulder injuries as they have more anterior tilting of the scapula post workday.

Wrist activity monitor counts are correlated with dynamic but not static assessments of arm elevation exposure made with a triaxial accelerometer

There is evidence in the literature of a link between workplace arm elevation exposure and atraumatic shoulder injuries. However, there are several methods that can be used to assess this exposure. The goal of the present study was to compare the outcomes of an activity monitor attached to the wrist and a triaxial accelerometer mounted on the humerus. Twenty-one workers wore both sensors over the course of a full workday. While the activity monitor data was not significantly correlated with any static humeral parameters, it was strongly correlated with all dynamic parameters. The use of a simple, commercially available activity monitor might offer an inexpensive alternative for the assessment of a large number of subjects over multiple workdays to determine the relationship between dynamic motion and occupation shoulder injuries in the future.

PRACTITIONER SUMMARY

Arm overuse has been linked to occupation-related shoulder injuries. An activity monitor attached to the wrist and a triaxial accelerometer mounted on the humerus were compared in a field trial. The results demonstrate that, under certain conditions, a commercially available activity monitor might be a useful tool for exposure assessment.

Bias and imprecision in posture percentile variables estimated from short exposure samples

Background

Upper arm postures are believed to be an important risk determinant for musculoskeletal disorder development in the neck and shoulders. The 10^th and 90^th percentiles of the angular elevation distribution have been reported in many studies as measures of neutral and extreme postural exposures, and variation has been quantified by the 10^th-90^th percentile range. Further, the 50^th percentile is commonly reported as a measure of "average" exposure. These four variables have been estimated using samples of observed or directly measured postures, typically using sampling durations between 5 and 120 min.

Methods

The present study examined the statistical properties of estimated full-shift values of the 10^th, 50^th and 90^th percentile and the 10^th-90^th percentile range of right upper arm elevation obtained from samples of seven different durations, ranging from 5 to 240 min. The sampling strategies were realized by simulation, using a parent data set of 73 full-shift, continuous inclinometer recordings among hairdressers. For each shift, sampling duration and exposure variable, the mean, standard deviation and sample dispersion limits (2.5% and 97.5%) of all possible sample estimates obtained at one minute intervals were calculated and compared to the true full-shift exposure value.

Results

Estimates of the 10^th percentile proved to be upward biased with limited sampling, and those of the 90^th percentile and the percentile range, downward biased. The 50^th percentile was also slightly upwards biased. For all variables, bias was more severe with shorter sampling durations, and it correlated significantly with the true full-shift value for the 10^th and 90^th percentiles and the percentile range. As expected, shorter samples led to decreased precision of the estimate; sample standard deviations correlated strongly with true full-shift exposure values.

Conclusions

The documented risk of pronounced bias and low precision of percentile estimates obtained from short posture samples presents a concern in ergonomics research and practice, and suggests that alternative, unbiased exposure variables should be considered if data collection resources are restricted.

Analyses of possible risk factors for subacromial impingement syndrome

AIM: To evaluate the association between various risk factors, including sleeping position, and impingement syndrome. Impingement syndrome is the most common cause of shoulder problems. The pathogenesis of this problem is still debated these days.

METHODS: This was a case control study conducted at the outpatient clinic of Songklanakarind hospital. Data regarding history, physical examination and radiographic evaluations using supraspinatous outlet views were obtained from all patients with clinically suspected impingement syndrome. The diagnoses of impingement syndrome were confirmed by a xylocaine subacromial injection test. All patients were interviewed concerning their usual sleeping position, which was categorized into supine, decubitus, prone and undetermined. Radiographs were evaluated to determine the shape of the acromion, which was divided into 3 types: flat, curved and hook. We used logistic regression analysis to determine the association between risk factors and outcome.

RESULTS: The study group included 111 patients with impingement syndrome and 191 healthy volunteers as a control group. The mean age was about 50 years with a body mass index (BMI) of 24 kg/m² in both groups. The most common shape of the acromion was flat (84.5%), followed by curved (10.7%) and hook (4.8%). We found the 4 independent risk factors affecting impingement syndrome were smoking status, occupation, acromion shape and sleeping position. Patients who currently smoked had a 6.8 times greater risk of impingement syndrome compared to non-smokers (OR 6.8, 95% CI: 1.2-39) and government officers had a 6.3 times increased risk compared to rubber tappers (OR 6.3, 95% CI: 1.3-30.3). Patients with a hook type acromion had 6.2 times the risk of flat type (OR 6.2, 95% CI: 1.1-35) and patients who slept in the decubitus position had 3.7 times the risk of those who slept in the supine position (OR 3.7, 95% CI: 1.2-11.6). No significant associations were found between age, sex, BMI, sports activity and impingement syndrome.

CONCLUSION: Independent risk factors affecting impingement syndrome are current smoker, government officer, a hook-type acromion and the decubitus sleeping position.

Optimising case definitions of upper limb disorder for aetiological research and prevention: a review

Experts disagree about the optimal classification of upper limb disorders (ULDs). To explore whether differences in associations with occupational risk factors offer a basis for choosing between case definitions in aetiological research and surveillance, we analysed previously published research. Eligible reports (those with estimates of relative risk (RR) for >1 case definition relative to identical exposures were identified from systematic reviews of ULD and occupation and by hand-searching five peer-review journals published between January 1990 and June 2010. We abstracted details by anatomical site of the case and exposure definitions employed and paired estimates of RR, for alternative case definitions with identical occupational exposures. Pairs of case definitions were typically nested, a stricter definition being a subset of a simpler version. Differences in RR between paired definitions were expressed as the ratio of RRs, using that for the simpler definition as the denominator. We found 21 reports, yielding 320 pairs of RRs (82, 75 and 163 respectively at the shoulder, elbow, and distal arm). Ratios of RRs were frequently ≤1 (46%), the median ratio overall and by anatomical site being close to unity. In only 2% of comparisons did ratios reach ≥4. We conclude that complex ULD case definitions (e.g. involving physical signs, more specific symptom patterns, and investigations) yield similar associations with occupational risk factors to those using simpler definitions. Thus, in population-based aetiological research and surveillance, simple case definitions should normally suffice. Data on risk factors can justifiably be pooled in meta-analyses, despite differences in case definition.

Postures and movements in the most common tasks of power line workers

The repair and maintenance of electrical power lines involves awkward postures, which are known risk factors for developing musculoskeletal disorders. The aim of the present study was to quantify postures and movements of upper arm, head, upper back and neck in the main tasks performed by line workers. Posture of twelve right-handed line workers was recorded by inclinometry and presented as percentiles of angular and angular velocity distributions. All tasks involved considerable upper-arm elevation, ranging from 73° to 115° for the 90th percentile. Upper-arm elevation showed significant differences between tasks, but no consistent differences between right and left sides. Regarding velocity, the right arm presented higher levels than the left arm. All tasks required significant extension of head, upper back and neck, ranging from 7° to 67° for head (10th percentile). All tasks, except the one performed with a continuous extension, also involved pronounced flexion, ranging from 33° to 60° for the head (90th percentile). Work which required highly elevated arms also required significant head extension (r(2)=0.56). Awkward postures of upper arms, head, upper back and neck were identified by inclinometry, demonstrating the need for preventative interventions to reduce musculoskeletal disorders among line workers.

Variability in hand-arm vibration during grinding operations

BACKGROUND

Measurements of exposure to vibrations from hand-held tools are often conducted on a single occasion. However, repeated measurements may be crucial for estimating the actual dose with good precision. In addition, knowledge of determinants of exposure could be used to improve working conditions. The aim of this study was to assess hand-arm vibration (HAV) exposure during different grinding operations, in order to obtain estimates of the variance components and to evaluate the effect of work postures.

METHODS

Ten experienced operators used two compressed air-driven angle grinders of the same make in a simulated work task at a workplace. One part of the study consisted of using a grinder while assuming two different working postures: at a standard work bench (low) and on a wall with arms elevated and the work area adjusted to each operator's height (high). The workers repeated the task three times. In another part of the study, investigating the wheel wear, for each grinder, the operators used two new grinding wheels and with each wheel the operator performed two consecutive 1-min grinding tasks. Both grinding tasks were conducted on weld puddles of mild steel on a piece of mild steel. Measurements were taken according to ISO-standard 5349 [the equivalent hand-arm-weighted acceleration (m s(-2)) averaged over 1 min]. Mixed- and random-effects models were used to investigate the influence of the fixed variables and to estimate variance components.

RESULTS

The equivalent hand-arm-weighted acceleration assessed when the task was performed on the bench and at the wall was 3.2 and 3.3 m s(-2), respectively. In the mixed-effects model, work posture was not a significant variable. The variables 'operator' and 'grinder' together explained only 12% of the exposure variability and 'grinding wheel' explained 47%; the residual variability of 41% remained unexplained. When the effect of grinding wheel wear was investigated in the random-effects model, 37% of the variability was associated with the wheel while minimal variability was associated with the operator or the grinder and 37% was unexplained. The interaction effect of grinder and operator explained 18% of the variability. In the wheel wear test, the equivalent hand-arm-weighted accelerations for Grinder 1 during the first and second grinding minutes were 3.4 and 2.9 m s(-2), respectively, and for Grinder 2, they were 3.1 and 2.9 m s(-2), respectively. For Grinder 1, the equivalent hand-arm-weighted acceleration during the first grinding minute was significantly higher (P = 0.04) than during the second minute.

CONCLUSIONS

Work posture during grinding operations does not appear to affect the level of HAV. Grinding wheels explained much of the variability in this study, but almost 40% of the variance remained unexplained. The considerable variability in the equivalent hand-arm-weighted acceleration has an impact on the risk assessment at both the group and the individual level.

In vivo measurement of humeral elevation angles and exposure using a triaxial accelerometer

OBJECTIVE

The aim of this study was to measure the capability of a triaxial accelerometer (Virtual Corset) to collect humeral elevation angles and exposure parameters in a simulated occupational environment.

BACKGROUND

There is a need for an economical ambulatory device to estimate elevation angles and exposure parameters in occupational groups.

METHOD

A magnetic tracking device was used to assess the ability of the Virtual Corset to evaluate humeral elevation angles and identify exposure parameters with in vivo dynamic conditions for 16 female dental hygienists.

RESULTS

Significant differences were found for the reaching task with the Virtual Corset, underestimating the means of the average humeral elevation angle by 10 degrees and the means for the range of the humeral elevation by 4 degrees. Furthermore, significant differences were found for the exposure parameters with the Virtual Corset, overestimating the jerk by 4% and underestimating the percentage time above 40 degrees and 60 degrees by 9% and 4%, respectively. However, the Virtual Corset was able to identify similar kinematics patterns and exposure data when compared with a magnetic tracking device.

CONCLUSION

The outcomes of the study suggest that the Virtual Corset may be useful for data collection during a dental hygienist workday. Professions that have similar patterns of angular velocity and acceleration and humeral range of elevation as the dental hygienist flossing technique may benefit from the use of the Virtual Corset.

APPLICATION

This study provides evidence that the Virtual Corset can be used to reconstruct humeral elevation angles and identify exposure parameters in some tasks of dental hygienists.

Work-related lesions of the supraspinatus tendon: a case-control study

OBJECTIVES

To examine the dose-response relationship between cumulative duration of work with highly elevated arms (work above shoulder level) as well as of manual material handling and ruptures of the supraspinatus tendon in a population-based case-control study.

METHODS

In 14 radiologic practices, we recruited 483 male patients aged 25-65 with radiographically confirmed partial (n = 385) or total (n = 98) supraspinatus tears associated with shoulder pain. A total of 300 male control subjects were recruited. Data were gathered in a structured personal interview. To calculate cumulative exposure, the self-reported duration of lifting/carrying of heavy loads (>20 kg) as well as the duration of work with highly elevated arms was added up over the entire working life.

RESULTS

The results of our study support a dose-response relationship between cumulative duration of work with highly elevated arms and symptomatic supraspinatus tendon tears. For a cumulative duration of >3,195 h work above shoulder level, the risk of a supraspinatus tendon rupture is elevated to 2.0 (95% CI 1.1-3.5), adjusted for age, region, lifting/carrying of heavy loads, handheld vibration, apparatus gymnastics/shot put/javelin/hammer throwing/wrestling, and tennis. The cumulative duration of carrying/lifting of heavy loads also yields a positive dose-response relation with disease (independent from work above shoulder level and from handheld vibration), with an adjusted odds ratio of 1.8 (95% CI 1.0-3.2) in the highest exposure category (>77 h). We find an increased risk for subjects exposed to handheld vibration with an adjusted OR of 3.2 (95% CI 1.7-5.9) in the highest exposure category (16 years or more in the job with exposure), but a clear dose-response relationship is lacking.

CONCLUSIONS

This study points to a potential etiologic role of long-term cumulative effects of work with highly elevated arms and heavy lifting/carrying on shoulder tendon disorders.

On-site observations of physical work demands of train conductors and service electricians in the Netherlands

The objective of the present study was to assess the exposure to physical work demands of train conductors and service electricians at a railway company in the Netherlands. On-site observations were performed using the Task Recording and Analysis on Computer observation system to identify the mean duration and frequency of tasks, activities and body postures. In total, 36 train conductors and 41 service electricians were observed for a net working day of 7 h. Results showed that train conductors and service electricians climbed a flight of stairs on average 249 and 258 times, respectively, and that service electricians worked above shoulder height for 65 min on average. In both jobs, guidelines were exceeded, e.g. duration of standing, the number of times climbing a flight of stairs, kneeling and squatting or working in awkward postures, which are risk factors for developing musculoskeletal complaints. Suggestions are made concerning how to reduce these risk factors. STATEMENT OF RELEVANCE: Understanding physical work demands is essential for recognising risk factors for musculoskeletal disorders. Since train conductors and service electricians in the Netherlands reported work-related complaints, on-site observations were performed to determine the duration and frequency of physical work demands. Risk factors were identified in both professions, providing insights concerning preventative measures.

The reliability of side to side measurements of upper extremity activity levels in healthy subjects

Background

In both clinical and occupational settings, ambulatory sensors are becoming common for assessing all day measurements of arm motion. In order for the motion of a healthy, contralateral side to be used as a control for the involved side, the inherent side to side differences in arm usage must be minimal. The goal of the present study was to determine the reliability of side to side measurements of upper extremity activity levels in healthy subjects.

Methods

Thirty two subjects with no upper extremity pathologies were studied. Each subject wore a triaxial accelerometer on both arms for three and a half hours. Motion was assessed using parameters previously reported in the literature. Side to side differences were compared with the intraclass correlation coefficient, standard error of the mean, minimal detectable change scores and a projected sample size analysis.

Results

The variables were ranked based on their percentage of minimal detectable change scores and sample sizes needed for paired t-tests. The order of these rankings was found to be identical and the top ranked parameters were activity counts per hour (MDC% = 9.5, n = 5), jerk time (MDC% = 15.8, n = 8) and percent time above 30 degrees (MDC% = 34.7, n = 9).

Conclusions

In general, the mean activity levels during daily activities were very similar between dominant and non-dominant arms. Specifically, activity counts per hour, jerk time, and percent time above 30 degrees were found to be the variables most likely to reveal significant difference or changes in both individuals and groups of subjects. The use of ambulatory measurements of upper extremity activity has very broad uses for occupational assessments, musculoskeletal injuries of the shoulder, elbow, wrist and hand as well as neurological pathologies.

Psychosocial work factors and shoulder pain in hotel room cleaners

BACKGROUND

Hotel room cleaners have physically demanding jobs that place them at high risk for shoulder pain. Psychosocial work factors may also play a role in shoulder pain, but their independent role has not been studied in this group.

METHODS

Seventy-four percent (941 of 1,276) of hotel room cleaners from five Las Vegas hotels completed a 29-page survey assessing health status, working conditions, and psychosocial work factors. For this study, 493 of the 941 (52%) with complete data for 21 variables were included in multivariate logistic regression analyses.

RESULTS

Fifty-six percent reported shoulder pain in the prior four weeks. Room cleaners with effort-reward imbalance (ERI) were three times as likely to report shoulder pain (OR 2.99, 95% CI 1.95-4.59, P = 0.000) even after adjustment for physical workload and other factors. After adjustment for physical workload, job strain and iso-strain were not significantly associated with shoulder pain.

CONCLUSIONS

ERI is independently associated with shoulder pain in hotel room cleaners even after adjustment for physical workload and other risk factors.