Microfluidics and coagulation biology

Collective spreading of red blood cells flowing in a microchannel

Due to recent advances in micro total analysis system technologies, microfluidics provides increased opportunities to manipulate, stimulate, and diagnose blood cells. Controlling the concentration of cells at a given position across the width of a channel is an important aspect in the design of microfluidic devices. Despite its biomedical importance, the collective spreading of red blood cells (RBCs) in a microchannel has not yet been fully clarified. In this study, we experimentally investigated the collective spreading of RBCs in a straight microchannel, and found that RBCs initially distributed in one side of the microchannel spread to the spanwise direction during downstream flow. Spreading increased considerably as the hematocrit increased, though the flow rate had a small effect. We proposed a scaling argument to show that this spreading phenomenon was diffusive and mainly induced by cell-cell interactions. The dispersion coefficient was approximately proportional to the flow rate and the hematocrit. These results are useful in understanding collective behaviors of RBCs in a microchannel and in microcirculation.

Assessment of whole blood thrombosis in a microfluidic device lined by fixed human endothelium

The vascular endothelium and shear stress are critical determinants of physiological hemostasis and platelet function in vivo, yet current diagnostic and monitoring devices do not fully incorporate endothelial function under flow in their assessment and, therefore, they can be unreliable and inaccurate. It is challenging to include the endothelium in assays for clinical laboratories or point-of-care settings because living cell cultures are not sufficiently robust. Here, we describe a microfluidic device that is lined by a human endothelium that is chemically fixed, but still retains its ability to modulate hemostasis under continuous flow in vitro even after few days of storage. This device lined with a fixed endothelium supports formation of platelet-rich thrombi in the presence of physiological shear, similar to a living arterial vessel. We demonstrate the potential clinical value of this device by showing that thrombus formation and platelet function can be measured within minutes using a small volume (0.5 mL) of whole blood taken from subjects receiving antiplatelet medications. The inclusion of a fixed endothelial microvessel will lead to biomimetic analytical devices that can potentially be used for diagnostics and point-of-care applications.

ICAM-1-targeted thrombomodulin mitigates tissue factor-driven inflammatory thrombosis in a human endothelialized microfluidic model

Diverse human illnesses are characterized by loss or inactivation of endothelial thrombomodulin (TM), predisposing to microvascular inflammation, activation of coagulation, and tissue ischemia. Single-chain antibody fragment (scFv)/TM) fusion proteins, previously protective against end-organ injury in murine models of inflammation, are attractive candidates to treat inflammatory thrombosis. However, animal models have inherent differences in TM and coagulation biology, are limited in their ability to resolve and control endothelial biology, and do not allow in-depth testing of "humanized" scFv/TM fusion proteins, which are necessary for translation to the clinical domain. To address these challenges, we developed a human whole-blood, microfluidic model of inflammatory, tissue factor (TF)-driven coagulation that features a multichannel format for head-to-head comparison of therapeutic approaches. In this model, fibrin deposition, leukocyte adhesion, and platelet adhesion and aggregation showed a dose-dependent response to tumor necrosis factor-α activation and could be quantified via real-time microscopy. We used this model to compare hTM/R6.5, a humanized, intracellular adhesion molecule 1 (ICAM-1)-targeted scFv/TM biotherapeutic, to untargeted antithrombotic agents, including soluble human TM (shTM), anti-TF antibodies, and hirudin. The targeted hTM/R6.5 more effectively inhibited TF-driven coagulation in a protein C (PC)-dependent manner and demonstrated synergy with supplemental PC. These results support the translational prospects of ICAM-targeted scFv/TM and illustrate the utility of the microfluidic system as a platform to study humanized therapeutics at the interface of endothelium and whole blood under flow.

A PMMA microfluidic dielectric sensor for blood coagulation monitoring at the point-of-care

This paper describes the design and construct of a fully biocompatible, microfluidic, dielectric sensor targeted at monitoring human whole blood coagulation at the point-of-care (POC). The sensor assembly procedure involves using sputtered electrodes in a microfluidic channel with a physiologically relevant height of 50μm to create a three-dimensional (3D), parallel-plate, capacitive sensing area. The sensor is constructed with biocompatible materials of polymethyl methacrylate (PMMA) for the substrate and titanium nitride (TiN) for the sensing and floating electrodes. The real part of the complex relative dielectric permittivity of human whole blood is measured from 10kHz to 100MHz using an impedance analyzer and under static conditions. The temporal variation in dielectric permittivity at 1MHz for human whole blood undergoing coagulation shows a peak in permittivity at 5 minutes, which closely matches our previously established results. This sensor can pave the way for monitoring blood coagulation under physiologically relevant shear flow rates in the future.

Flow chamber and microfluidic approaches for measuring thrombus formation in genetic bleeding disorders

Platelet adhesion and aggregation, coagulation, fibrin formation, and fibrinolysis are regulated by the forces and flows imposed by blood at the site of a vascular injury. Flow chambers designed to observe these events are an indispensable part of doing hemostasis and thrombosis research, especially with human blood. Microfluidic methods have provided the flexibility to design flow chambers with complex geometries and features that more closely mimic the anatomy and physiology of blood vessels. Additionally, microfluidic systems with integrated optics and/or pressure sensors and on-board signal processing could transform what have been primarily research tools into clinical assays. Here, we describe a historical review of how flow-based approaches have informed biophysical mechanisms in genetic bleeding disorders, challenges and potential solutions for developing models of bleeding in vitro, and outstanding issues that need to be addressed prior to their use in clinical settings.

Hemodynamic studies of platelet thrombosis using microfluidics

Platelets contribute to thrombus formation in a variety of ways. Platelet adhesion, activation, and thrombus growth depend greatly on the type of hemodynamic environment surrounding an inciting event. Microfluidic systems may be used to explore these relationships. In this review, we describe some important considerations required in the design of a microfluidic system and identify some limitations that may require use of a macroscale system.

Hemodynamics-driven deposition of intraluminal thrombus in abdominal aortic aneurysms

Accumulating evidence suggests that intraluminal thrombus plays many roles in the natural history of abdominal aortic aneurysms. There is, therefore, a pressing need for computational models that can describe and predict the initiation and progression of thrombus in aneurysms. In this paper, we introduce a phenomenological metric for thrombus deposition potential and use hemodynamic simulations based on medical images from 6 patients to identify best-fit values of the 2 key model parameters. We then introduce a shape optimization method to predict the associated radial growth of the thrombus into the lumen based on the expectation that thrombus initiation will create a thrombogenic surface, which in turn will promote growth until increasing hemodynamically induced frictional forces prevent any further cell or protein deposition. Comparisons between predicted and actual intraluminal thrombus in the 6 patient-specific aneurysms suggest that this phenomenological description provides a good first estimate of thrombus deposition. We submit further that, because the biologically active region of the thrombus appears to be confined to a thin luminal layer, predictions of morphology alone may be sufficient to inform fluid-solid-growth models of aneurysmal growth and remodeling.

NIH workshop report on the trans-agency blood-brain interface workshop 2016: exploring key challenges and opportunities associated with the blood, brain and their interface

A trans-agency workshop on the blood–brain interface (BBI), sponsored by the National Heart, Lung and Blood Institute, the National Cancer Institute and the Combat Casualty Care Research Program at the Department of Defense, was conducted in Bethesda MD on June 7–8, 2016. The workshop was structured into four sessions: (1) blood sciences; (2) exosome therapeutics; (3) next generation in vitro blood–brain barrier (BBB) models; and (4) BBB delivery and targeting. The first day of the workshop focused on the physiology of the blood and neuro-vascular unit, blood or biofluid-based molecular markers, extracellular vesicles associated with brain injury, and how these entities can be employed to better evaluate injury states and/or deliver therapeutics. The second day of the workshop focused on technical advances in in vitro models, BBB manipulations and nanoparticle-based drug carrier designs, with the goal of improving drug delivery to the central nervous system. The presentations and discussions underscored the role of the BBI in brain injury, as well as the role of the BBB as both a limiting factor and a potential conduit for drug delivery to the brain. At the conclusion of the meeting, the participants discussed challenges and opportunities confronting BBI translational researchers. In particular, the participants recommended using BBI translational research to stimulate advances in diagnostics, as well as targeted delivery approaches for detection and therapy of both brain injury and disease.

Systems Analysis of Thrombus Formation

The systems analysis of thrombosis seeks to quantitatively predict blood function in a given vascular wall and hemodynamic context. Relevant to both venous and arterial thrombosis, a Blood Systems Biology approach should provide metrics for rate and molecular mechanisms of clot growth, thrombotic risk, pharmacological response, and utility of new therapeutic targets. As a rapidly created multicellular aggregate with a polymerized fibrin matrix, blood clots result from hundreds of unique reactions within and around platelets propagating in space and time under hemodynamic conditions. Coronary artery thrombosis is dominated by atherosclerotic plaque rupture, complex pulsatile flows through stenotic regions producing high wall shear stresses, and plaque-derived tissue factor driving thrombin production. In contrast, venous thrombosis is dominated by stasis or depressed flows, endothelial inflammation, white blood cell-derived tissue factor, and ample red blood cell incorporation. By imaging vessels, patient-specific assessment using computational fluid dynamics provides an estimate of local hemodynamics and fractional flow reserve. High-dimensional ex vivo phenotyping of platelet and coagulation can now power multiscale computer simulations at the subcellular to cellular to whole vessel scale of heart attacks or strokes. In addition, an integrated systems biology approach can rank safety and efficacy metrics of various pharmacological interventions or clinical trial designs.

Utility of microfluidic devices to study the platelet-endothelium interface

The integration of biomaterials and understanding of vascular biology has led to the development of perfusable endothelialized flow models, which have been used as valuable tools to study the platelet-endothelium interface under shear. In these models, the parameters of geometry, compliance, biorheology, and cellular complexity are varied to recapitulate the physical biology of platelet recruitment and activation under physiologically relevant conditions of blood flow. In this review, we summarize the mechanistic insights learned from perfusable microvessel models and discuss the potential utility as well as challenges of endothelialized microfluidic devices to study platelet function in the bloodstream in vitro.

Localization of Short-Chain Polyphosphate Enhances its Ability to Clot Flowing Blood Plasma

Short-chain polyphosphate (polyP) is released from platelets upon platelet activation, but it is not clear if it contributes to thrombosis. PolyP has increased propensity to clot blood with increased polymer length and when localized onto particles, but it is unknown whether spatial localization of short-chain polyP can accelerate clotting of flowing blood. Here, numerical simulations predicted the effect of localization of polyP on clotting under flow, and this was tested in vitro using microfluidics. Synthetic polyP was more effective at triggering clotting of flowing blood plasma when localized on a surface than when solubilized in solution or when localized as nanoparticles, accelerating clotting at 10-200 fold lower concentrations, particularly at low to sub-physiological shear rates typical of where thrombosis occurs in large veins or valves. Thus, sub-micromolar concentrations of short-chain polyP can accelerate clotting of flowing blood plasma under flow at low to sub-physiological shear rates. However, a physiological mechanism for the localization of polyP to platelet or vascular surfaces remains unknown.

Microfluidic whole blood testing of platelet response to pharmacological agents

Platelets present a number of intracellular and transmembrane targets subject to pharmacological modulation, either for cardiovascular disease reduction or as an unintended drug response. Microfluidic devices allow human blood to clot on a defined surface under controlled hemodynamic and pharmacological conditions. The potencies of a number of antiplatelet and anticancer drugs have been tested with respect to platelet deposition on collagen under flow. Inhibitors of cyclooxygenase-1 (COX-1) reduce platelet deposition, either when added ex vivo to blood or ingested orally by patients prior to testing. Some individuals display a functional "aspirin-insensitivity" in microfluidic assay. When certain nonsteroidal anti-inflammatory drugs (NSAIDs) are taken orally, they block COX-1 acetylation by aspirin with concomitant reduction of aspirin efficacy against platelets in microfluidic assay. Both P2Y₁ and P2Y₁₂ inhibitors reduce platelet deposition under flow, as do NO donors and iloprost that target the guanylate cyclase and the prostacyclin receptor, respectively. In a microfluidic assay of 37 kinase inhibitors, dasatinib had potent antiplatelet activity, while bosutinib was less potent. Dasatinib and bosutinib have known profiles against numerous kinases, revealing overlapping and nonoverlapping activities relevant to their unique actions against platelets. Also, dasatinib caused a marked and specific inhibition of GPVI signaling induced by convulxin, consistent with a dasatinib-associated bleeding risk. Microfluidic devices facilitate drug library screening, dose-response testing, and drug-drug interaction studies. Kinase inhibitors developed as anticancer agents may present antiplatelet activities that are detectable by microfluidic assay and potentially linked to bleeding risks.

A universal tumor cell isolation method enabled by fibrin-coated microchannels

We report a simple but effective strategy to capture tumor cells using fibrin-immobilized microchannels. It is a universal method since it shows an ability to capture both epithelial and mesenchymal tumor cells. The cell capture efficiency is up to 90%.

In microfluidico: Recreating in vivo hemodynamics using miniaturized devices

Microfluidic devices create precisely controlled reactive blood flows and typically involve: (i) validated anticoagulation/pharmacology protocols, (ii) defined reactive surfaces, (iii) defined flow-transport regimes, and (iv) optical imaging. An 8-channel device can be run at constant flow rate or constant pressure drop for blood perfusion over a patterned collagen, collagen/kaolin, or collagen/tissue factor (TF) to measure platelet, thrombin, and fibrin dynamics during clot growth. A membrane-flow device delivers a constant flux of platelet agonists or coagulation enzymes into flowing blood. A trifurcated device sheaths a central blood flow on both sides with buffer, an ideal approach for on-chip recalcification of citrated blood or drug delivery. A side-view device allows clotting on a porous collagen/TF plug at constant pressure differential across the developing clot. The core-shell architecture of clots made in mouse models can be replicated in this device using human blood. For pathological flows, a stenosis device achieves shear rates of >100,000 s(-1) to drive plasma von Willebrand factor (VWF) to form thick long fibers on collagen. Similarly, a micropost-impingement device creates extreme elongational and shear flows for VWF fiber formation without collagen. Overall, microfluidics are ideal for studies of clotting, bleeding, fibrin polymerization/fibrinolysis, cell/clot mechanics, adhesion, mechanobiology, and reaction-transport dynamics.

Dynamics of blood flow and thrombus formation in a multi-bypass microfluidic ladder network

The reaction dynamics of a complex mixture of cells and proteins, such as blood, in branched circulatory networks within the human microvasculature or extravascular therapeutic devices such as extracorporeal oxygenation machine (ECMO) remains ill-defined. In this report we utilize a multi-bypass microfluidics ladder network design with dimensions mimicking venules to study patterns of blood platelet aggregation and fibrin formation under complex shear. Complex blood fluid dynamics within multi-bypass networks under flow were modeled using COMSOL. Red blood cells and platelets were assumed to be non-interacting spherical particles transported by the bulk fluid flow, and convection of the activated coagulation factor II, thrombin, was assumed to be governed by mass transfer. This model served as the basis for predicting formation of local shear rate gradients, stagnation points and recirculation zones as dictated by the bypass geometry. Based on the insights from these models, we were able to predict the patterns of blood clot formation at specific locations in the device. Our experimental data was then used to adjust the model to account for the dynamical presence of thrombus formation in the biorheology of blood flow. The model predictions were then compared to results from experiments using recalcified whole human blood. Microfluidic devices were coated with the extracellular matrix protein, fibrillar collagen, and the initiator of the extrinsic pathway of coagulation, tissue factor. Blood was perfused through the devices at a flow rate of 2 µL/min, translating to physiologically relevant initial shear rates of 300 and 700 s^-1 for main channels and bypasses, respectively. Using fluorescent and light microscopy, we observed distinct flow and thrombus formation patterns near channel intersections at bypass points, within recirculation zones and at stagnation points. Findings from this proof-of-principle ladder network model suggest a specific correlation between microvascular geometry and thrombus formation dynamics under shear. This model holds potential for use as an integrative approach to identify regions susceptible to intravascular thrombus formation within the microvasculature as well as extravascular devices such as ECMO.

Bioprinted thrombosis-on-a-chip

Pathologic thrombosis kills more people than cancer and trauma combined; it is associated with significant disability and morbidity, and represents a major healthcare burden. Despite advancements in medical therapies and imaging, there is often incomplete resolution of the thrombus. The residual thrombus can undergo fibrotic changes over time through infiltration of fibroblasts from the surrounding tissues and eventually transform into a permanent clot often associated with post-thrombotic syndrome. In order to understand the importance of cellular interactions and the impact of potential therapeutics to treat thrombosis, an in vitro platform using human cells and blood components would be beneficial. Towards achieving this aim, there have been studies utilizing the capabilities of microdevices to study the hemodynamics associated with thrombosis. In this work, we further exploited the utilization of 3D bioprinting technology, for the construction of a highly biomimetic thrombosis-on-a-chip model. The model consisted of microchannels coated with a layer of confluent human endothelium embedded in a gelatin methacryloyl (GelMA) hydrogel, where human whole blood was infused and induced to form thrombi. Continuous perfusion with tissue plasmin activator led to dissolution of non-fibrotic clots, revealing clinical relevance of the model. Further encapsulating fibroblasts in the GelMA matrix demonstrated the potential migration of these cells into the clot and subsequent deposition of collagen type I over time, facilitating fibrosis remodeling that resembled the in vivo scenario. Our study suggests that in vitro 3D bioprinted blood coagulation models can be used to study the pathology of fibrosis, and particularly, in thrombosis. This versatile platform may be conveniently extended to other vascularized fibrotic disease models.

Monitoring time course of human whole blood coagulation using a microfluidic dielectric sensor with a 3D capacitive structure

This paper reports on the design, fabrication, and testing of a microfluidic sensor for dielectric spectroscopy (DS) of human whole blood during coagulation. The sensor employs a three-dimensional (3D), parallel-plate, capacitive sensing structure with a floating electrode integrated into a microfluidic channel. Using an impedance analyzer and after a 5-point calibration, the sensor is shown to measure the real part of complex relative dielectric permittivity of human whole blood in a frequency range of 10kHz to 100MHz. The temporal variation of dielectric permittivity at 1MHz for human whole blood from three different healthy donors shows a peak in permittivity at ~ 4 to 5 minutes, which also corresponds to the onset of CaCl2-initiated coagulation of the blood sample verified visually.

Microfluidics-based side view flow chamber reveals tether-to-sling transition in rolling neutrophils

Neutrophils rolling at high shear stress (above 6 dyn/cm²) form tethers in the rear and slings in the front. Here, we developed a novel photo-lithographically fabricated, silicone(PDMS)-based side-view flow chamber to dynamically visualize tether and sling formation. Fluorescently membrane-labeled mouse neutrophils rolled on P-selectin substrate at 10 dyn/cm². Most rolling cells formed 5 tethers that were 2–30 μm long. Breaking of a single tether caused a reproducible forward microjump of the cell, showing that the tether was load-bearing. About 15% of all tether-breaking events resulted in slings. The tether-to-sling transition was fast (<100 ms) with no visible material extending above the rolling cell, suggesting a very low bending modulus of the tether. The sling downstream of the rolling cell aligned according to the streamlines before landing on the flow chamber. These new observations explain how slings form from tethers and provide insight into their biomechanical properties.

Functional assay of antiplatelet drugs based on margination of platelets in flowing blood

A novel functional assay of antiplatelet drug efficacy was designed by utilizing the phenomena of platelet margination in flowing blood and transient platelet contacts with surface-immobilized platelet agonists. Flow margination enhances transient contacts of platelets with the walls of flow chambers covered with surface-immobilized proteins. Depending on the type and the surface density of the immobilized agonists, such transient interactions could "prime" the marginated platelet subpopulation for enhanced activation and adhesion downstream. By creating an upstream surface patch with an immobilized platelet agonist, platelet flow margination was used to test how effective antiplatelet drugs are in suppressing downstream platelet activation and adhesion. The platelet adhesion downstream was measured by a so-called "capture" patch region close to the distal end of the flow chamber. Platelet adhesion downstream was found to be dose-dependent on the upstream surface coverage of the "priming" patch, with immobilized fibrinogen acting as a platelet agonist. Several antiplatelet agents (acetylsalicylic acid, eptifibatide, and tirofiban) were evaluated for their efficacy in attenuating downstream adhesion after upstream platelet priming. The activation of the platelet population was found to be dependent on both the extent of the upstream agonist stimulus and the antiplatelet drug concentration. Such a relationship provides an opportunity to measure the efficacy of specific antiplatelet agents against the type and concentration of upstream platelet agonists.

Effects of different shear rates on the attachment and detachment of platelet thrombi

Thrombosis and hemostasis take place in flowing blood, which generates shear forces. The effect of different shear rates, particularly pathological forces, on platelet thrombus formation remains to be fully elucidated. The present study observed the morphological characteristics and hierarchical structure of thrombi on the collagen surface at a wide range of wall shear rates (WSRs) and examined the underlying mechanisms. Calcein AM‑labeled whole blood was perfused over a collagen‑coated surface at different shear rates set by a Bioflux 200 microfluidic device and the thrombi formed were assessed for area coverage, the height and the hierarchical structure defined by the extent of platelet activation and packing density. The factors that affect thrombus formation were also investigated. Platelet thrombus formation varied under different WSRs, for example, dispersed platelet adhesion mixed with erythrocytes was observed at 125‑250 s(‑1), extensive and thin platelet thrombi were observed at 500‑1,500 s(‑1), and sporadic, thick thrombi were observed at pathological WSRs of 2,500‑5,000 s(‑1), which showed a tendency to be shed. With increasing WSRs, the height of the thrombi showed an increasing linear trend, whereas the total fluorescence intensity and area of the thrombi exhibited a parabolic curve‑like change, with a turning point at a WSR of 2,500 s(‑1). The number of thrombi, the average fluorescence intensity and the area per thrombus showed similar trends, with an initial upwards incline followed by a decline. The thrombi formed at higher WSRs had a thicker shell, which led to a more densely packed core. Platelet thrombus formation under shear‑flow was regulated by the adhesive strength, which was mediated by receptor‑ligand interaction, the platelet deposition induced by shear rates and the detachment by the dynamic force of flow. This resulted in a balance between thrombus attachment, including adhesion and aggregation, and detachment. Collectively, compared with physiological low WSRs, pathological high WSRs caused thicker and more easily shed thrombi with more condensed cores, which was regulated by an attachment‑detachment balance. These results provide novel insights into the properties of thrombus formation on collagen at different WSRs, and offers possible explanations for certain clinical physiopathological phenomena, including physical hemostasis and pathological thrombosis.

Coagulation Factor XI Promotes Distal Platelet Activation and Single Platelet Consumption in the Bloodstream Under Shear Flow

OBJECTIVE

Coagulation factor XI (FXI) has been shown to contribute to thrombus formation on collagen or tissue factor-coated surfaces in vitro and in vivo by enhancing thrombin generation. Whether the role of the intrinsic pathway of coagulation is restricted to the local site of thrombus formation is unknown. This study was aimed to determine whether FXI could promote both proximal and distal platelet activation and aggregate formation in the bloodstream.

APPROACH AND RESULTS

Pharmacological blockade of FXI activation or thrombin activity in blood did not affect local platelet adhesion, yet reduced local platelet aggregation, thrombin localization, and fibrin formation on immobilized collagen and tissue factor under shear flow, ex vivo. Downstream of the thrombus formed on immobilized collagen or collagen and 10 pmol/L tissue factor, platelet CD62P expression, microaggregate formation, and progressive platelet consumption were significantly reduced in the presence of FXI function-blocking antibodies or a thrombin inhibitor in a shear rate- and time-dependent manner. In a non-human primate model of thrombus formation, we found that inhibition of FXI reduced single platelet consumption in the bloodstream distal to a site of thrombus formation.

CONCLUSIONS

This study demonstrates that the FXI-thrombin axis contributes to distal platelet activation and procoagulant microaggregate formation in the blood flow downstream of the site of thrombus formation. Our data highlight FXI as a novel therapeutic target for inhibiting distal platelet consumption without affecting proximal platelet adhesion.

Methods to Determine the Lagrangian Shear Experienced by Platelets during Thrombus Growth

Platelets can become activated in response to changes in flow-induced shear; however, the underlying molecular mechanisms are not clearly understood. Here we present new techniques for experimentally measuring the flow-induced shear rate experienced by platelets prior to adhering to a thrombus. We examined the dynamics of blood flow around experimentally grown thrombus geometries using a novel combination of experimental (ex vivo) and numerical (in silico) methodologies. Using a microcapillary system, platelet aggregate formation was analysed at elevated shear rates in the presence of coagulation inhibitors, where thrombus formation is predominantly platelet-dependent. These approaches permit the resolution and quantification of thrombus parameters at the scale of individual platelets (2 μm) in order to quantify real time thrombus development. Using our new techniques we can correlate the shear rate experienced by platelets with the extent of platelet adhesion and aggregation. The techniques presented offer the unique capacity to determine the flow properties for a temporally evolving thrombus field in real time.

On-chip recalcification of citrated whole blood using a microfluidic herringbone mixer

In vitro assays of platelet function and coagulation are typically performed in the presence of an anticoagulant. The divalent cation chelator sodium citrate is among the most common because its effect on coagulation is reversible upon reintroduction of divalent cations. Adding divalent cations into citrated blood by batch mixing leads to platelet activation and initiation of coagulation after several minutes, thus limiting the time blood can be used before spontaneously clotting. In this work, we describe a herringbone microfluidic mixer to continuously introduce divalent cations into citrated blood. The mixing ratio, defined as the ratio of the volumetric flow rates of citrated blood and recalcification buffer, can be adjusted by changing the relative inlet pressures of these two solutions. This feature is useful in whole blood assays in order to account for differences in hematocrit, and thus viscosity. The recalcification process in the herringbone mixer does not activate platelets. The advantage of this continuous mixing approach is demonstrated in microfluidic vascular injury model in which platelets and fibrin accumulate on a collagen-tissue factor surface under flow. Continuous recalcification with the herringbone mixer allowed for flow assay times of up to 30 min, more than three times longer than the time achieved by batch recalcification. This continuous mixer allows for measurements of thrombus formation, remodeling, and fibrinolysis in vitro over time scales that are relevant to these physiological processes.

Platelet Adhesion and Thrombus Formation in Whole Blood at Arterial Shear Rate at the End of Pregnancy

PROBLEM

Platelet reactivity has not been evaluated in integrated functional testing during normal pregnancy. Here, we analysed platelet functions under arterial shear rate in comparison with static conditions.

METHOD OF STUDY

Thirty pregnant women with uncomplicated pregnancies and 30 healthy non-pregnant women were enrolled in this study. Platelet adhesion to collagen and fibrinogen and subsequent thrombus formation were measured at arterial shear rate in whole blood using a microfluidic and imaging system. Standard light transmission aggregometry, flow cytometry of activation markers in washed platelets and impedance aggregometry in whole blood were also used to assess platelet responsiveness in static conditions.

RESULTS

Compared to non-pregnant controls, thrombus formation on collagen fibres and firm platelet adhesion on fibrinogen under arterial shear rate were significantly reduced in pregnant women. Platelet aggregometry assays in suspension showed a slight increase in platelet reactivity in pregnant women.

CONCLUSION

While platelet aggregometry and platelet activation markers in static conditions show little changes in platelet reactivity, monitoring of platelet adhesion and thrombus growth on collagen or fibrinogen under flow condition in whole blood indicates a significant decrease in pregnant women compared to controls. This decrease might contribute to counteract a hypercoagulable state and to reduce the risk of arterial thrombosis.

A comprehensive study on different modelling approaches to predict platelet deposition rates in a perfusion chamber

Thrombus formation is a multiscale phenomenon triggered by platelet deposition over a protrombotic surface (eg. a ruptured atherosclerotic plaque). Despite the medical urgency for computational tools that aid in the early diagnosis of thrombotic events, the integration of computational models of thrombus formation at different scales requires a comprehensive understanding of the role and limitation of each modelling approach. We propose three different modelling approaches to predict platelet deposition. Specifically, we consider measurements of platelet deposition under blood flow conditions in a perfusion chamber for different time periods (3, 5, 10, 20 and 30 minutes) at shear rates of 212 s⁻¹, 1390 s⁻¹ and 1690 s⁻¹. Our modelling approaches are: i) a model based on the mass-transfer boundary layer theory; ii) a machine-learning approach; and iii) a phenomenological model. The results indicate that the three approaches on average have median errors of 21%, 20.7% and 14.2%, respectively. Our study demonstrates the feasibility of using an empirical data set as a proxy for a real-patient scenario in which practitioners have accumulated data on a given number of patients and want to obtain a diagnosis for a new patient about whom they only have the current observation of a certain number of variables.

Inhibition of clot formation in deterministic lateral displacement arrays for processing large volumes of blood for rare cell capture

Microfluidic deterministic lateral displacement (DLD) arrays have been applied for fractionation and analysis of cells in quantities of ~100 μL of blood, with processing of larger quantities limited by clogging in the chip. In this paper, we (i) demonstrate that this clogging phenomenon is due to conventional platelet-driven clot formation, (ii) identify and inhibit the two dominant biological mechanisms driving this process, and (iii) characterize how further reductions in clot formation can be achieved through higher flow rates and blood dilution. Following from these three advances, we demonstrate processing of 14 mL equivalent volume of undiluted whole blood through a single DLD array in 38 minutes to harvest PC3 cancer cells with ~86% yield. It is possible to fit more than 10 such DLD arrays on a single chip, which would then provide the capability to process well over 100 mL of undiluted whole blood on a single chip in less than one hour.

Microfluidic technology as an emerging clinical tool to evaluate thrombosis and hemostasis

Assessment of platelet function and coagulation under flow conditions can augment traditional static assays used to evaluate patients with suspected hemostatic or thrombotic disorders. Among the available flow-based assays, microfluidic devices require the smallest blood volume and provide multiple output options. These assays are based on the presence of wall shear stress that mimics in vivo interactions between blood components and vessel walls. Microfluidic devices can generate essential information regarding homeostatic regulation of platelet activation and subsequent engagement of the coagulation cascade leading to fibrin deposition and clot formation. Emerging data suggest that microfluidic assays may also reveal consistent patterns of hemostatic or thrombotic pathology, and could aid in assessing and monitoring patient-specific effects of coagulation-modifying therapies.

Micro-elastometry on whole blood clots using actuated surface-attached posts (ASAPs)

We present a novel technology for microfluidic elastometry and demonstrate its ability to measure stiffness of blood clots as they form. A disposable micro-capillary strip draws small volumes (20 μL) of whole blood into a chamber containing a surface-mounted micropost array. The posts are magnetically actuated, thereby applying a shear stress to the blood clot. The posts' response to magnetic field changes as the blood clot forms; this response is measured by optical transmission. We show that a quasi-static model correctly predicts the torque applied to the microposts. We experimentally validate the ability of the system to measure clot stiffness by correlating our system with a commercial thromboelastograph. We conclude that actuated surface-attached post (ASAP) technology addresses a clinical need for point-of-care and small-volume elastic haemostatic assays.

Analysis of platelet function and dysfunction

Although platelets act as central players of haemostasis only their cross-talk with other blood cells, plasma factors and the vascular compartment enables the formation of a stable thrombus. Multiple activation processes and complex signalling networks are responsible for appropriate platelet function. Thus, a variety of platelet function tests are available for platelet research and diagnosis of platelet dysfunction. However, universal platelet function tests that are sensitive to all platelet function defects do not exist and therefore diagnostic algorithms for suspected platelet function disorders are still recommended in clinical practice. Based on the current knowledge of human platelet activation this review evaluates point-of-care related screening tests in comparison with specific platelet function assays and focuses on their diagnostic utility in relation to severity of platelet dysfunction. Further, systems biology-based platelet function methods that integrate global and specific analysis of platelet vessel wall interaction (advanced flow chamber devices) and post-translational modifications (platelet proteomics) are presented and their diagnostic potential is addressed.

A continuum model for platelet plug formation, growth and deformation

A numerical framework for modelling platelet plug dynamics is presented in this work. It consists of an extension of a biochemical and plug growth model with a solid mechanics model for the plug coupled with a fluid-structure interaction model for the blood flow-plug system. The platelet plug is treated as a neo-Hookean elastic solid, of which the implementation is based on an updated Lagrangian approach. The framework is applied to different haemodynamic configurations coupled with different shear moduli of the plug. Results about plug growth, shape and size, as well as the stress distribution, are shown. Based on the simulations performed, we conclude that the deformability of the platelet plug is essential for its growth.

Hemodynamics in the microcirculation and in microfluidics

Hemodynamics in microcirculation is important for hemorheology and several types of circulatory disease. Although hemodynamics research has a long history, the field continues to expand due to recent advancements in numerical and experimental techniques at the micro-and nano-scales. In this paper, we review recent computational and experimental studies of blood flow in microcirculation and microfluidics. We first focus on the computational studies of red blood cell (RBC) dynamics, from the single cellular level to mesoscopic multiple cellular flows, followed by a review of recent computational adhesion models for white blood cells, platelets, and malaria-infected RBCs, in which the cell adhesion to the vascular wall is essential for cellular function. Recent developments in optical microscopy have enabled the observation of flowing blood cells in microfluidics. Experimental particle image velocimetry and particle tracking velocimetry techniques are described in this article. Advancements in micro total analysis system technologies have facilitated flowing cell separation with microfluidic devices, which can be used for biomedical applications, such as a diagnostic tool for breast cancer or large intestinal tumors. In this paper, cell-separation techniques are reviewed for microfluidic devices, emphasizing recent advances and the potential of this fast-evolving research field in the near future.

Spatiotemporal characterization of a fibrin clot using quantitative phase imaging

Studying the dynamics of fibrin clot formation and its morphology is an important problem in biology and has significant impact for several scientific and clinical applications. We present a label-free technique based on quantitative phase imaging to address this problem. Using quantitative phase information, we characterized fibrin polymerization in real-time and present a mathematical model describing the transition from liquid to gel state. By exploiting the inherent optical sectioning capability of our instrument, we measured the three-dimensional structure of the fibrin clot. From this data, we evaluated the fractal nature of the fibrin network and extracted the fractal dimension. Our non-invasive and speckle-free approach analyzes the clotting process without the need for external contrast agents.

Emerging microengineered tools for functional analysis and phenotyping of blood cells

The available techniques for assessing blood cell functions are limited considering the various types of blood cell and their diverse functions. In the past decade, rapid advances in microengineering have enabled an array of blood cell functional measurements that are difficult or impossible to achieve using conventional bulk platforms. Such miniaturized blood cell assay platforms also provide the attractive capabilities of reducing chemical consumption, cost, and assay time, as well as exciting opportunities for device integration, automation, and assay standardization. This review summarizes these contemporary microengineered tools and discusses their promising potential for constructing accurate in vitro models and rapid clinical diagnosis using minimal amounts of whole-blood samples.

Contact activation of blood coagulation on a defined kaolin/collagen surface in a microfluidic assay

Generation of active Factor XII (FXIIa) triggers blood clotting on artificial surfaces and may also enhance intravascular thrombosis. We developed a patterned kaolin (0 to 0.3 pg/μm(2))/type 1 collagen fibril surface for controlled microfluidic clotting assays. Perfusion of whole blood (treated only with a low level of 4 μg/mL of the XIIa inhibitor, corn trypsin inhibitor) drove platelet deposition followed by fibrin formation. At venous wall shear rate (100 s(-1)), kaolin accelerated onset of fibrin formation by ~100 sec when compared to collagen alone (250 sec vs. 350 sec), with little effect on platelet deposition. Even with kaolin present, arterial wall shear rate (1000 s(-1)) delayed and suppressed fibrin formation compared to venous wall shear rate. A comparison of surfaces for extrinsic activation (tissue factor TF/collagen) versus contact activation (kaolin/collagen) that each generated equal platelet deposition at 100 s(-1) revealed: (1) TF surfaces promoted much faster fibrin onset (at 100 sec) and more endpoint fibrin at 600 sec at either 100 s(-1) or 1000 s(-1), and (2) kaolin and TF surfaces had a similar sensitivity for reduced fibrin deposition at 1000 s(-1) (compared to fibrin formed at 100 s(-1)) despite differing coagulation triggers. Anti-platelet drugs inhibiting P2Y1, P2Y12, cyclooxygenase-1 or activating IP-receptor or guanylate cyclase reduced platelet and fibrin deposition on kaolin/collagen. Since FXIIa or FXIa inhibition may offer safe antithrombotic therapy, especially for biomaterial thrombosis, these defined collagen/kaolin surfaces may prove useful in drug screening tests or in clinical diagnostic assays of blood under flow conditions.

Real-time measurement of thrombin generation using continuous droplet microfluidics

Thrombin, which has the leading role in the blood coagulation cascade, is an important biomarker in hemostasis and cardiovascular disease (CVD) development. In this study, a measurement system capable of continuously monitoring individual thrombin generation using droplet microfluidic technology is manipulated. The thrombin generation assay based on fluogenic substrate is performed within the droplets and the thrombin generation curve of plasma sample activated by tissue factor is measured in real-time to reflect the sample conditions dynamically. The injection of the inhibitor of thrombin generation is developed to assay the inhibited curve which relates to thrombin self-inhibition in biological systems. This microfluidic system is integrated with the microdialysis probe, which is useful to connect to the living animals for future in vivo real time thrombin measurements for rapid CVD diagnosis.

Microfluidics-based in vivo mimetic systems for the study of cellular biology

The human body is a complex network of molecules, organelles, cells, tissues, and organs: an uncountable number of interactions and transformations interconnect all the system’s components. In addition to these biochemical components, biophysical components, such as pressure, flow, and morphology, and the location of all of these interactions play an important role in the human body. Technical difficulties have frequently limited researchers from observing cellular biology as it occurs within the human body, but some state-of-the-art analytical techniques have revealed distinct cellular behaviors that occur only in the context of the interactions. These types of findings have inspired bioanalytical chemists to provide new tools to better understand these cellular behaviors and interactions.

What blocks us from understanding critical biological interactions in the human body? Conventional approaches are often too naïve to provide realistic data and in vivo whole animal studies give complex results that may or may not be relevant for humans. Microfluidics offers an opportunity to bridge these two extremes: while these studies will not model the complexity of the in vivo human system, they can control the complexity so researchers can examine critical factors of interest carefully and quantitatively. In addition, the use of human cells, such as cells isolated from donated blood, captures human-relevant data and limits the use of animals in research. In addition, researchers can adapt these systems easily and cost-effectively to a variety of high-end signal transduction mechanisms, facilitating high-throughput studies that are also spatially, temporally, or chemically resolved. These strengths should allow microfluidic platforms to reveal critical parameters in the human body and provide insights that will help with the translation of pharmacological advances to clinical trials.

In this Account, we describe selected microfluidic innovations within the last 5 years that focus on modeling both biophysical and biochemical interactions in cellular communication, such as flow and cell–cell networks. We also describe more advanced systems that mimic higher level biological networks, such as organ on-a-chip and animal on-a-chip models. Since the first papers in the early 1990s, interest in the bioanalytical use of microfluidics has grown significantly. Advances in micro-/nanofabrication technology have allowed researchers to produce miniaturized, biocompatible assay platforms suitable for microfluidic studies in biochemistry and chemical biology. Well-designed microfluidic platforms can achieve quick, in vitro analyses on pico- and femtoliter volume samples that are temporally, spatially, and chemically resolved. In addition, controlled cell culture techniques using a microfluidic platform have produced biomimetic systems that allow researchers to replicate and monitor physiological interactions. Pioneering work has successfully created cell–fluid, cell–cell, cell–tissue, tissue–tissue, even organ-like level interfaces. Researchers have monitored cellular behaviors in these biomimetic microfluidic environments, producing validated model systems to understand human pathophysiology and to support the development of new therapeutics.

Microfluidic assay of hemophilic blood clotting: distinct deficits in platelet and fibrin deposition at low factor levels

BACKGROUND

Coagulation factor deficiencies create a range of bleeding phenotypes. Microfluidic devices offer controlled hemodynamics and defined procoagulant triggers for measurement of clotting under flow.

OBJECTIVES

We tested a flow assay of contact pathway-triggered clotting to quantify platelet and fibrin deposition distal of dysfunctional thrombin production. Microfluidic metrics were then compared with PTT or % factor activity assays.

METHODS

Whole blood (WB) treated with low level corn trypsin inhibitor (4 μg mL⁻¹) from nine healthy donors and 27 patients (deficient in factor [F] VIII, 19 patients; FIX, one patient; FXI, one patient; VWF, six patients) was perfused over fibrillar collagen at wall shear rate = 100 s⁻¹.

RESULTS

Using healthy WB, platelets deposited within 30 s, while fibrin appeared within 6 min. Compared with healthy controls, WB from patients displayed a 50% reduction in platelet deposition only at < 1% factor activity. In contrast, striking defects in fibrin deposition occurred for patients with < 13% factor activity (or PTT > 40 s). Full occlusion of the 60-μm high channel was completely absent over the 15-min test in patients with < 1% factor activity, while an intermediate defect was present in patients with > 1% factor.

CONCLUSION

Spontaneous bleeding in patients with < 1% factor activity may be linked to deficits in both platelet and fibrin deposition, a risk known to be mitigated when factor levels are raised to > 1% activity (PTT of ~40-60 s), a level that does not necessarily rescue fibrin formation under flow.

Microvascular platforms for the study of platelet-vessel wall interactions

Platelets interact with the endothelium to regulate vascular integrity and barrier function, mediate inflammation and immune response, and prevent and arrest hemorrhage. In this review, we describe existing tools to study the flow-dependent interactions of platelets with the vessel wall. We also discuss our work on building engineered microvessels to study the roles of platelets on endothelial barrier function, endothelial sprouting, and thrombus formation on both quiescent and stimulated endothelium. In particular, we will show the advantage of using a cell-remodelable system in the studies of platelet-vessel wall interactions.

Structure and function of platelet receptors initiating blood clotting

At the clinical level, recent studies reveal the link between coagulation and other pathophysiological processes, including platelet activation, inflammation, cancer, the immune response, and/or infectious diseases. These links are likely to underpin the coagulopathy associated with risk factors for venous thromboembolic (VTE) and deep vein thrombosis (DVT). At the molecular level, the interactions between platelet-specific receptors and coagulation factors could help explain coagulopathy associated with aberrant platelet function, as well as revealing new approaches targeting platelet receptors in diagnosis or treatment of VTE or DVT. Glycoprotein (GP)Ibα, the major ligand-binding subunit of the platelet GPIb-IX-V complex, that binds the adhesive ligand, von Willebrand factor (VWF), is co-associated with the platelet-specific collagen receptor, GPVI. The GPIb-IX-V/GPVI adheso-signaling complex not only initiates platelet activation and aggregation (thrombus formation) in response to vascular injury or disease but GPIbα also regulates coagulation through a specific interaction with thrombin and other coagulation factors. Here, we discuss the structure and function of key platelet receptors involved in thrombus formation and coagulation in health and disease, with a particular focus on platelet GPIbα.

Measurement science in the circulatory system

The dynamics of the cellular and molecular constituents of the circulatory system are regulated by the biophysical properties of the heart, vasculature and blood cells and proteins. In this review, we discuss measurement techniques that have been developed to characterize the physical and mechanical parameters of the circulatory system across length scales ranging from the tissue scale (centimeter) to the molecular scale (nanometer) and time scales of years to milliseconds. We compare the utility of measurement techniques as a function of spatial resolution and penetration depth from both a diagnostic and research perspective. Together, this review provides an overview of the utility of measurement science techniques to study the spatial systems of the circulatory system in health and disease.

On-chip evaluation of platelet adhesion and aggregation upon exposure to mesoporous silica nanoparticles

Mesoporous silica nanoparticles are promising drug delivery agents; however, their interaction with various in vivo biological components is still under investigation. In this work, the impact of sub-50 nm diameter mesoporous silica nanoparticles on platelet function is investigated using a microfluidic platform to model blood vessel characteristics. Platelet adhesion and aggregation in the presence of mesoporous silica nanoparticles is investigated, controlling whether or not platelets are activated ahead of nanoparticle exposure. The results indicate that nanoparticles slightly compromise platelet adhesion to endothelial cells at low nanoparticle doses, but that high nanoparticle doses significantly increase the number of platelet adhesion events, leading to higher probability for uncontrolled platelet actions (e.g. clot formation in vivo). High nanoparticle doses also induced platelet aggregation. While platelet activation and aggregation occurred, in no case did nanoparticle exposure result in significant loss of platelet viability; as such, this work clearly demonstrates that aspects besides viability, such as cellular adhesion and interaction with other cell types, have to be considered in the context of nanotoxicology. This simple and highly adaptable analytical platform will be useful for further nanotoxicity studies involving other nanoparticle and cell types.

Physical biology in cancer. 2. The physical biology of circulating tumor cells

The identification, isolation, and characterization of circulating tumor cells (CTCs) promises to enhance our understanding of the evolution of cancer in humans. CTCs provide a window into the hematogenous, or "fluid phase," of cancer, underlying the metastatic transition in which a locally contained tumor spreads to other locations in the body through the bloodstream. With the development of sensitive and specific CTC identification and isolation methodologies, the role of CTCs in clinical diagnostics, disease surveillance, and the physical basis of metastasis continues to be established. This review focuses on the quantification of the basic biophysical properties of CTCs and the use of these metrics to understand the hematogenous dissemination of these enigmatic cells.