Modeling tissue-specific signaling and organ function in three dimensions

An omentum-inspired 3D PEG hydrogel for identifying ECM-drivers of drug resistant ovarian cancer

Ovarian cancer (OvCa) is a challenging disease to treat due to poor screening techniques and late diagnosis. There is an urgent need for additional therapy options, as patients recur in 70% of cases. The limited availability of clinical treatment options could be a result of poor predictions in early stage drug screens on standard tissue culture polystyrene (TCPS). TCPS does not capture the mechanical and biochemical cues that cells experience in vivo, which can impact how cells will respond to a drug. Therefore, an in vitro model that captures some of the microenvironment features that the cells experience in vivo could provide better insights into drug responses. In this study, we formed 3D multicellular tumor spheroids (MCTS) in microwells and encapsulated them in 3D omentum-inspired hydrogels. SKOV-3 MCTS were resistant to Paclitaxel in our 3D hydrogels compared to a monolayer on TCPS. Toward clinical application, we tested cells from patients [ovarian carcinoma ascites spheroids (OCAS)] who had been treated with Paclitaxel, and drug responses predicted by using the 3D omentum-inspired hydrogels demonstrated the lack of the Paclitaxel response of these samples. Additionally, we observed the presence of collagen production around the encapsulated SKOV-3 MCTS, but not significantly on TCPS. Our results demonstrated that our 3D omentum-inspired hydrogel is an improved in vitro drug testing platform to study the OvCa drug response for patient-derived cells and helped us identify collagen 3 as a potential driver of Paclitaxel resistance in 3D.

Screening of angiogenesis inhibitors using a 3D vascular microfluidic chip to achieve contraception

Angiogenesis plays a vital role in the process of embryo implantation, as it improves endometrial receptivity and guides embryo implantation, thus creating a favorable environment for subsequent development of the embryo. Hence, a theory of achieving contraception by inhibiting angiogenesis was put forward. Here, we screened the drugs inhibiting angiogenesis using cell scratch wound assay and a 3D biomimetic vascular microfluidic chip, then observed the effect of them on contraception by injecting these drugs into fertilized mice and observing if the embryos were implanted. We preliminarily verify the feasibility of contraception by inhibiting angiogenesis and gives a new direction in the development of contraceptive pills.

A novel technique for in situ uniaxial tests of self-assembled soft biomaterials

We introduce a novel method to form 3D biomimetic tissues from a droplet of a cell-extracellular matrix (ECM) mixture on a sensor stage and to quantify tissue force and stiffness as a function of time under optical microscopes. This method exploits advances in micro-nano fabrication and capillarity for self-assembly and self-alignment of tissues on the stage. It allows simultaneous investigation of the microstructure of the tissue in situ while its mechanical response is quantified, thus linking tissue biophysics with physiology and revealing structural-functional properties of 3D tissues. We demonstrate the functionality of the stage by studying the mechanical behavior of different cell-collagen mixtures under mechanical, chemical and electrical stimulation. This includes force evolution in cell-free collagen during curing, myotubes differentiated from muscle cell-collagen/Matrigel ECM subjected to electrical stimulation, and fibroblast-collagen tissue subjected to cancer cell conditioned media (CM) and a Rho-kinase inhibitor, Y27632. Muscle contraction decreases with increasing frequency of electrical stimulation, and fibroblasts respond to CM by increasing contractility for a short time and completely relax in the presence of Y27632 but restore force with Y27632 washout.

Preclinical Organotypic Models for the Assessment of Novel Cancer Therapeutics and Treatment

The immense costs in both financial terms and preclinical research effort that occur in the development of anticancer drugs are unfortunately not matched by a substantial increase in improved clinical therapies due to the high rate of failure during clinical trials. This may be due to issues with toxicity or lack of clinical effectiveness when the drug is evaluated in patients. Currently, much cancer research is driven by the need to develop therapies that can exploit cancer cell adaptations to conditions in the tumor microenvironment such as acidosis and hypoxia, the requirement for more-specific, targeted treatments, or the exploitation of 'precision medicine' that can target known genomic changes in patient DNA. The high attrition rate for novel anticancer therapies suggests that the preclinical methods used in screening anticancer drugs need improvement. This chapter considers the advantages and disadvantages of 3D organotypic models in both cancer research and cancer drug screening, particularly in the areas of targeted drugs and the exploitation of genomic changes that can be used for therapeutic advantage in precision medicine.

In Vitro Models for Studying Invasive Transitions of Ductal Carcinoma In Situ

About one fourth of all newly identified cases of breast carcinoma are diagnoses of breast ductal carcinoma in situ (DCIS). Since we cannot yet distinguish DCIS cases that would remain indolent from those that may progress to life-threatening invasive ductal carcinoma (IDC), almost all women undergo aggressive treatment. In order to allow for more rational individualized treatment, we and others are developing in vitro models to identify and validate druggable pathways that mediate the transition of DCIS to IDC. These models range from conventional two-dimensional (2D) monolayer cultures on plastic to 3D cultures in natural or synthetic matrices. Some models consist solely of DCIS cells, either cell lines or primary cells. Others are co-cultures that include additional cell types present in the normal or cancerous human breast. The 3D co-culture models more accurately mimic structural and functional changes in breast architecture that accompany the transition of DCIS to IDC. Mechanistic studies of the dynamic and temporal changes associated with this transition are facilitated by adapting the in vitro models to engineered microfluidic platforms. Ultimately, the goal is to create in vitro models that can serve as a reproducible preclinical screen for testing therapeutic strategies that will reduce progression of DCIS to IDC. This review will discuss the in vitro models that are currently available, as well as the progress that has been made using them to understand DCIS pathobiology.

Effect of cyclic compression on bone marrow mesenchymal stromal cells in tissue engineered cartilage scaffold

In this current study, a novel multilayer porous composite scaffold was fabricated with chitosan (CS), silk fibrin (SF) and nano-hydroxyapatite (n-HA). Scanning electron microscope was utilized to detect the characteristics of the composed scaffold. Rat bone marrow stromal cells (rBMSC) were loaded onto the CS/SF/n-HA scaffold and cultured in a bioreactor under an on-off dynamic compression (10% compressive strain, 0.5 Hz, [2 h action + 4 h pause]/cycle, 4 cycles/day). Metabolism of the loaded rBMSC was assessed through CCK-8 test. Qualitative polymerase chain reaction and western blot were applied to assess the chondrogenic differentiation of the seeded cells. Compressive modulus of the cell/scaffold constructs was analyzed. Additionally, a pig model was employed to evaluate the effect of the tissue-engineered cartilage on repairing of cartilage defect. Results showed that the four layers within the scaffold were tightly connected without gaps between porous interfaces of the layers. Scaffold porosity was 92.20% ± 1.30%. The cyclic compression upregulated chondrogenesis markers (Aggrecan, Sox-9, and collagen II). Increased compressive modulus of the cell/scaffold complex was detected after dynamic compression. The pig bone marrow stromal cells/scaffold complex exposed to cyclic compression presented most favorable reparative effect on the mini pig femoral condyle cartilage defects. Our study suggested that the on-off dynamic compression might be a promising approach to fabricate tissue-engineered cartilage in vitro. © 2019 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 107A: 1294-1302, 2019.

Hydrogel materials for the application of islet transplantation

Type 1 diabetes mellitus is a serious disease comprising approximately 10% of all diabetes cases, and the global incidence of type 1 diabetes mellitus is steadily rising without any promise of a cure in the near future. Although islet transplantation has proven to be an effective means of treating type 1 diabetes mellitus and promoting insulin independence in patients, its widespread implementation has been severely constrained by instances of post-transplantation islet cell death, rejection, and severe adverse immune responses. Islet encapsulation is an active area of research aimed at shielding implanted islets from immunological rejection and inflammation while still allowing for effective insulin and nutrient exchange with donor cells. Given their promising physical and chemical properties, hydrogels have been a major subject of focus in the field of islet transplantation and encapsulation technology, offering promising advances towards immunologically privileged islet implants. The present review therefore summarizes the current state of research regarding the use of hydrogels in the context of islet transplantation, including both natural molecular hydrogels and artificial polymer hydrogels, with the goal of understanding the current strengths and weaknesses of this treatment strategy.

Chemically defined and xenogeneic-free differentiation of human pluripotent stem cells into definitive endoderm in 3D culture

In vitro differentiation of human pluripotent stem cells (hPSCs) into definitive endoderm (DE) represents a key step towards somatic cells of lung, liver and pancreas. For future clinical applications, mass production of differentiated cells at chemically defined conditions and free of xenogeneic substances is envisioned. In this study we adapted our previously published two-dimensional (2D) DE induction protocol to three-dimensional (3D) static suspension culture in the absence of the xenogeneic extracellular matrix Matrigel. Next, fetal calf serum and bovine serum albumin present in the standard medium were replaced by a custom-made and xeno-free B-27. This yielded in a chemically defined and xenogeneic-free 3D culture protocol for differentiation of hPSCs into DE at efficiencies similar to standard 2D conditions. This novel protocol successfully worked with different hPSC lines including hESCs and hiPSCs maintained in two different stem cell media prior to differentiation. DE cells obtained by our novel BSA-free 3D protocol could be further differentiated into PDX1- or NKX6.1-expressing pancreatic progenitor cells. Notably, upon DE differentiation, we also identified a CXCR4⁺/NCAM⁺/EpCAM^low cell population with reduced DE marker gene expression. These CXCR4⁺/NCAM⁺/EpCAM^low cells emerge as a result of Wnt/beta-catenin hyperactivation via elevated CHIR-99021 concentrations and likely represent misspecified DE.

Bioprinting of 3D breast epithelial spheroids for human cancer models

3D human cancer models provide a better platform for drug efficacy studies than conventional 2D culture, since they recapitulate important aspects of the in vivo microenvironment. While biofabrication has advanced model creation, bioprinting generally involves extruding individual cells in a bioink and then waiting for these cells to self-assemble into a hierarchical 3D tissue. This self-assembly is time consuming and requires complex cellular interactions with other cell types, extracellular matrix components, and growth factors. We therefore investigated if we could directly bioprint pre-formed 3D spheroids in alginate-based bioinks to create a model tissue that could be used almost immediately. Human breast epithelial cell lines were bioprinted as individual cells or as pre-formed spheroids, either in monoculture or co-culture with vascular endothelial cells. While individual breast cells only spontaneously formed spheroids in Matrigel-based bioink, pre-formed breast spheroids maintained their viability, architecture, and function after bioprinting. Bioprinted breast spheroids were more resistant to paclitaxel than individually printed breast cells; however, this effect was abrogated by endothelial cell co-culture. This study shows that 3D cellular structure bioprinting has potential to create tissue models that quickly replicate the tumor microenvironment.

Development of extracellular matrix supported 3D culture of renal cancer cells and renal cancer stem cells

Novel experimental conditions of cancer cell line culture have evolved throughout the recent years, with significantly growing interest in xeno-free, serum-free and three-dimensional culture variants. The choice of proper culture media may enable to mimic tumor microenvironment and promotion of cancer stem cells proliferation. To assess whether stem-like phenotype inducing media may be applied in renal cancer stem cell research, we performed a widespread screening of 13 cell culture media dedicated for mesenchymal cells, stem cells as well as mesenchymal stem cells. We have also screened extracellular matrix compounds and selected optimal RCC 3D-ECM supported culture model. Our results revealed that 786-O as well as HKCSCs cell line cultures in xeno-free media (NutriStem/StemXvivo) and laminin coated plates provide a useful tool in RCC cancer biology research and at the same time enable effective drug toxicity screening. We propose bio-mimic 3D RCC cell culture model with specific low-serum and xeno-free media that promote RCC cell viability and stem-like phenotype according to the tested genes encoding stemness factors including E-cadherin, N-cadherin, HIF1, HIF2, VEGF, SOX2, PAX2 and NESTIN.

Cancer-associated fibroblasts suppress SOX2-induced dysplasia in a lung squamous cancer coculture

Tumor−stroma interactions play a critical role in regulating tumorigenesis. However, how these interactions contribute to changes in tissue architecture and cell polarity observed during tumor development is unclear. Here we report a 3D coculture system that recapitulates key phenotypic changes during the progression of lung squamous carcinoma (LUSC) as well as the dynamic interactions between LUSC cells and components of the tumor microenvironment (TME). Our data suggest that two major components of TME, including the extracellular matrix and cancer-associated fibroblasts, could override cell intrinsic oncogenic changes in determining the disease phenotype in the context of LUSC. These findings may have broad implications for LUSC biology as well as the design of future therapies.

Tumorigenesis depends on intricate interactions between genetically altered tumor cells and their surrounding microenvironment. While oncogenic drivers in lung squamous carcinoma (LUSC) have been described, the role of stroma in modulating tissue architecture, particularly cell polarity, remains unclear. Here, we report the establishment of a 3D coculture system of LUSC epithelial cells with cancer-associated fibroblasts (CAFs) and extracellular matrix that together capture key components of the tumor microenvironment (TME). Single LUSC epithelial cells develop into acinar-like structures with 0.02% efficiency, and addition of CAFs provides proper tumor−stromal interactions within an appropriate 3D architectural context. Using this model, we recapitulate key pathological changes during tumorigenesis, from hyperplasia to dysplasia and eventually invasion, in malignant LUSC spheroids that undergo phenotypic switching in response to cell intrinsic and extrinsic changes. Overexpression of SOX2 is sufficient to mediate the transition from hyperplasia to dysplasia in LUSC spheroids, while the presence of CAFs makes them invasive. Unexpectedly, CAFs suppress the activity of high SOX2 levels, restore hyperplasia, and enhance the formation of acinar-like structures. Taken together, these observations suggest that stromal factors can override cell intrinsic oncogenic changes in determining the disease phenotype, thus providing fundamental evidence for the existence of dynamic reciprocity between the nucleus and the TME of LUSC.

Injectable Biomimetic Hydrogels as Tools for Efficient T Cell Expansion and Delivery

Biomaterial-based scaffolds are promising tools for controlled immunomodulation. They can be applied as three dimensional (3D) culture systems in vitro, whereas in vivo they may be used to dictate cellular localization and exert spatiotemporal control over cues presented to the immune system. As such, scaffolds can be exploited to enhance the efficacy of cancer immunotherapies such as adoptive T cell transfer, in which localization and persistence of tumor-specific T cells dictates treatment outcome. Biomimetic polyisocyanopeptide (PIC) hydrogels are polymeric scaffolds with beneficial characteristics as they display reversible thermally-induced gelation at temperatures above 16°C, which allows for their minimally invasive delivery via injection. Moreover, incorporation of azide-terminated monomers introduces functional handles that can be exploited to include immune cell-modulating cues. Here, we explore the potential of synthetic PIC hydrogels to promote the in vitro expansion and in vivo local delivery of pre-activated T cells. We found that PIC hydrogels support the survival and vigorous expansion of pre-stimulated T cells in vitro even at high cell densities, highlighting their potential as 3D culture systems for efficient expansion of T cells for their adoptive transfer. In particular, the reversible thermo-sensitive behavior of the PIC scaffolds favors straightforward recovery of cells. PIC hydrogels that were injected subcutaneously gelated instantly in vivo, after which a confined 3D structure was formed that remained localized for at least 4 weeks. Importantly, we noticed no signs of inflammation, indicating that PIC hydrogels are non-immunogenic. Cells co-delivered with PIC polymers were encapsulated within the scaffold in vivo. Cells egressed gradually from the PIC gel and migrated into distant organs. This confirms that PIC hydrogels can be used to locally deliver cells within a supportive environment. These results demonstrate that PIC hydrogels are highly promising for both the in vitro expansion and in vivo delivery of pre-activated T cells. Covalent attachment of biomolecules onto azide-functionalized PIC polymers provides the opportunity to steer the phenotype, survival or functional response of the adoptively transferred cells. As such, PIC hydrogels can be used as valuable tools to improve current adoptive T cell therapy strategies.

Expression of two non-mutated genetic elements is sufficient to stimulate oncogenic transformation of human mammary epithelial cells

Trefoil factor 3 (TFF3) expression is positively associated with advanced clinicopathological features of mammary carcinoma (MC). Herein, we provide evidence for a functional role of TFF3 in oncogenic transformation of immortalized, but otherwise normal human mammary epithelial cells (HMECs), namely, HMEC-hTERT, MCF10A, and MCF12A. Forced expression of TFF3 in immortalized-HMECs enhanced cell proliferation, cell survival, anchorage-independent growth, produced highly disorganised three-dimensional (3D) acinar structures and generated tumours in immunocompromised mice. Forced expression of TFF3 in immortalized-HMECs stimulated STAT3 activity that was required for TFF3-stimulated cell proliferation, survival, and anchorage-independent growth. TFF3 specifically utilised STAT3 activity to govern a transcriptional program, which was required for TFF3-stimulated oncogenic transformation of immortalized-HMECs, including transcriptional upregulation of CCND1 and BCL2. siRNA-mediated depletion or functional inhibition of STAT3 significantly inhibited the TFF3-stimulated transcription of CCND1 and BCL2 and oncogenicity in immortalized-HMECs. Furthermore, DOX-inducible expression of TFF3 in HMEC-hTERT cells also permitted anchorage-independent growth and produced disorganized acinar structures in 3D Matrigel culture. Removal of DOX-induced expression of TFF3 in HMEC-hTERT cells, previously grown with DOX, resulted in efficient normalisation of the disorganized acinar architecture and attenuated cell viability in Matrigel culture. Cumulatively, these findings suggest that TFF3 is a potent oncogene and its increased expression along with hTERT in HMECs is sufficient to produce oncogenic transformation.

Modeling Host-Pathogen Interactions in the Context of the Microenvironment: Three-Dimensional Cell Culture Comes of Age

Tissues and organs provide the structural and biochemical landscapes upon which microbial pathogens and commensals function to regulate health and disease. While flat two-dimensional (2-D) monolayers composed of a single cell type have provided important insight into understanding host-pathogen interactions and infectious disease mechanisms, these reductionist models lack many essential features present in the native host microenvironment that are known to regulate infection, including three-dimensional (3-D) architecture, multicellular complexity, commensal microbiota, gas exchange and nutrient gradients, and physiologically relevant biomechanical forces (e.g., fluid shear, stretch, compression). A major challenge in tissue engineering for infectious disease research is recreating this dynamic 3-D microenvironment (biological, chemical, and physical/mechanical) to more accurately model the initiation and progression of host-pathogen interactions in the laboratory. Here we review selected 3-D models of human intestinal mucosa, which represent a major portal of entry for infectious pathogens and an important niche for commensal microbiota. We highlight seminal studies that have used these models to interrogate host-pathogen interactions and infectious disease mechanisms, and we present this literature in the appropriate historical context. Models discussed include 3-D organotypic cultures engineered in the rotating wall vessel (RWV) bioreactor, extracellular matrix (ECM)-embedded/organoid models, and organ-on-a-chip (OAC) models. Collectively, these technologies provide a more physiologically relevant and predictive framework for investigating infectious disease mechanisms and antimicrobial therapies at the intersection of the host, microbe, and their local microenvironments.

Herpes Simplex Virus 1 Infection Promotes the Growth of a Subpopulation of Tumor Cells in Three-Dimensional Uveal Melanoma Cultures

Cancer cells are exposed to HSV-1 during oncolytic virotherapy with the intention of killing tumor cells. Our observations reported here suggest that potential dangers of HSV-1 oncolytic therapy include promotion of growth of some tumor cells. Furthermore, our findings raise the possibility that HSV-1 infection of neoplastic cells during natural infections or vaccinations may promote the growth of tumors. Our study indicates that HSV-1 infection of 3D tumor cell cultures provides an experimental platform in which mechanisms of HSV-1-mediated promotion of tumor cell growth can be effectively studied.

Herpes simplex virus 1 (HSV-1)-mediated oncolytic therapy is an emerging cancer treatment modality with potential effectiveness against a variety of malignancies. To better understand the interaction of HSV-1 with neoplastic cells, we inoculated three-dimensional (3D) cultures of human uveal melanoma cells with HSV-1. 3D melanoma cultures were established by placing tumor cells on the surface of a Matrigel matrix, which was followed by the growth of tumor cells on the matrix surface and invasion of the Matrigel matrix by some tumor cells to form multicellular tumor spheroids within the matrix. When established 3D melanoma cultures were inoculated with HSV-1 by placing virus on the surface of cultures, virus infection caused extensive death of melanoma cells growing on the surface of the 3D matrix and significantly decreased the number of tumor cell spheroids within the matrix. However, HSV-1 infection did not lead to a complete destruction of tumor cells in the 3D cultures during a 17-day observation period and, surprisingly, HSV-1 infection promoted the growth of some melanoma cells within the matrix as determined by the significantly increased size of residual viable multicellular tumor spheroids in virus-inoculated 3D cultures at 17 days after virus inoculation. Acyclovir treatment inhibited HSV-1-induced tumor cell killing but did not block the virus infection-induced increase in spheroid size. These findings suggest that although HSV-1 oncolytic virotherapy may cause extensive tumor cell killing, it may also be associated with the unintended promotion of the growth of some tumor cells.

IMPORTANCE Cancer cells are exposed to HSV-1 during oncolytic virotherapy with the intention of killing tumor cells. Our observations reported here suggest that potential dangers of HSV-1 oncolytic therapy include promotion of growth of some tumor cells. Furthermore, our findings raise the possibility that HSV-1 infection of neoplastic cells during natural infections or vaccinations may promote the growth of tumors. Our study indicates that HSV-1 infection of 3D tumor cell cultures provides an experimental platform in which mechanisms of HSV-1-mediated promotion of tumor cell growth can be effectively studied.

Human tissue-engineered skeletal muscle: a novel 3D in vitro model for drug disposition and toxicity after intramuscular injection

The development of laboratory-grown tissues, referred to as organoids, bio-artificial tissue or tissue-engineered constructs, is clearly expanding. We describe for the first time how engineered human muscles can be applied as a pre- or non-clinical model for intramuscular drug injection to further decrease and complement the use of in vivo animal studies. The human bio-artificial muscle (BAM) is formed in a seven day tissue engineering procedure during which human myoblasts fuse and differentiate to aligned myofibers in an extracellular matrix. The dimensions of the BAM constructs allow for injection and follow-up during several days after injection. A stereotactic setup allows controllable injection at multiple sites in the BAM. We injected several compounds; a dye, a hydrolysable compound, a reducible substrate and a wasp venom toxin. Afterwards, direct reflux, release and metabolism were assessed in the BAM constructs in comparison to 2D cell culture and isolated human muscle strips. Spectrophotometry and luminescence allowed to measure the release of the injected compounds and their metabolites over time. A release profile over 40 hours was observed in the BAM model in contrast to 2D cell culture, showing the capacity of the BAM model to function as a drug depot. We also determined compound toxicity on the BAMs by measuring creatine kinase release in the medium, which increased with increasing toxic insult. Taken together, we show that the BAM is an injectable human 3D cell culture model that can be used to measure release and metabolism of injected compounds in vitro.

Biophysical, Biochemical, and Cell Based Approaches Used to Decipher the Role of Carbonic Anhydrases in Cancer and to Evaluate the Potency of Targeted Inhibitors

Carbonic anhydrases (CAs) are thought to be important for regulating pH in the tumor microenvironment. A few of the CA isoforms are upregulated in cancer cells, with only limited expression in normal cells. For these reasons, there is interest in developing inhibitors that target these tumor-associated CA isoforms, with increased efficacy but limited nonspecific cytotoxicity. Here we present some of the biophysical, biochemical, and cell based techniques and approaches that can be used to evaluate the potency of CA targeted inhibitors and decipher the role of CAs in tumorigenesis, cancer progression, and metastatic processes. These techniques include esterase activity assays, stop flow kinetics, and mass inlet mass spectroscopy (MIMS), all of which measure enzymatic activity of purified protein, in the presence or absence of inhibitors. Also discussed is the application of X-ray crystallography and Cryo-EM as well as other structure-based techniques and thermal shift assays to the studies of CA structure and function. Further, large-scale genomic and proteomic analytical methods, as well as cell based techniques like those that measure cell growth, apoptosis, clonogenicity, and cell migration and invasion, are discussed. We conclude by reviewing approaches that test the metastatic potential of CAs and how the aforementioned techniques have contributed to the field of CA cancer research.

Modulation of Inflammatory Reactions by Low-Dose Ionizing Radiation: Cytokine Release of Murine Endothelial Cells Is Dependent on Culture Conditions

Background

In many European countries, patients with a variety of chronical inflammatory diseases are treated with low-dose radiotherapy (LD-RT). In contrast to high-dose irradiation given to tumor patients, little is known about radiobiological mechanisms underlying this clinical successful LD-RT application. The objective of this study was to gain a better insight into the modulation of inflammatory reactions after LD-RT on the basis of endothelial cells (EC) as major participants and regulators of inflammation.

Methods

Three murine EC lines were cultivated under 2D and 3D culture conditions and irradiated with doses from 0.01 Gy to 2 Gy. To simulate an inflammatory situation, cells were activated with TNF-α. After LD-RT, a screening of numerous inflammatory markers was determined by multiplex assay, followed by detailed analyses of four cytokines (KC, MCP-1, RANTES, and G-CSF). Additionally, the monocyte binding to EC was analyzed.

Results

Cytokine concentrations were dependent on culture condition, IR dose, time point after IR, and EC origin. IR caused nonlinear dose-dependent effects on secretion of the proinflammatory cytokines KC, MCP-1, and RANTES. The monocyte adhesion was significantly enhanced after IR as well as activation.

Conclusions

The study shows that LD-RT, also using very low radiation doses, has a clear immunomodulatory effect on EC as major participants and regulators of inflammation.

Independent control of matrix adhesiveness and stiffness within a 3D self-assembling peptide hydrogel

A cell's insoluble microenvironment has increasingly been shown to exert influence on its function. In particular, matrix stiffness and adhesiveness strongly impact behaviors such as cell spreading and differentiation, but materials that allow for independent control of these parameters within a fibrous, stromal-like microenvironment are very limited. In the current work, we devise a self-assembling peptide (SAP) system that facilitates user-friendly control of matrix stiffness and RGD (Arg-Gly-Asp) concentration within a hydrogel possessing a microarchitecture similar to stromal extracellular matrix. In this system, the RGD-modified SAP sequence KFE-RGD and the scrambled sequence KFE-RDG can be directly swapped for one another to change RGD concentration at a given matrix stiffness and total peptide concentration. Stiffness is controlled by altering total peptide concentration, and the unmodified base peptide KFE-8 can be included to further increase this stiffness range due to its higher modulus. With this tunable system, we demonstrate that human mesenchymal stem cell morphology and differentiation are influenced by both gel stiffness and the presence of functional cell binding sites in 3D culture. Specifically, cells 24 hours after encapsulation were only able to spread out in stiffer matrices containing KFE-RGD. Upon addition of soluble adipogenic factors, soft gels facilitated the greatest adipogenesis as determined by the presence of lipid vacuoles and PPARγ-2 expression, while increasing KFE-RGD concentration at a given stiffness had a negative effect on adipogenesis. This three-component hydrogel system thus allows for systematic investigation of matrix stiffness and RGD concentration on cell behavior within a fibrous, three-dimensional matrix.

STATEMENT OF SIGNIFICANCE

Physical cues from a cell's surrounding environment-such as the density of cell binding sites and the stiffness of the surrounding material-are increasingly being recognized as key regulators of cell function. Currently, most synthetic biomaterials used to independently tune these parameters lack the fibrous structure characteristic of stromal extracellular matrix, which can be important to cells naturally residing within stromal tissues. In this manuscript, we describe a 3D hydrogel encapsulation system that provides user-friendly control over matrix stiffness and binding site concentration within the context of a stromal-like microarchitecture. Binding site concentration and gel stiffness both influenced cell spreading and differentiation, highlighting the utility of this system to study the independent effects of these material properties on cell function.

Trophoblast differentiation, invasion and hormone secretion in a three-dimensional in vitro implantation model with rhesus monkey embryos

BACKGROUND

The initiation of primate embryo invasion into the endometrium and the formation of the placenta from trophoblasts, fetal mesenchyme, and vascular components are essential for the establishment of a successful pregnancy. The mechanisms which direct morphogenesis of the chorionic villi, and the interactions between trophectoderm-derived trophoblasts and the fetal mesenchyme to direct these processes during placentation are not well understood due to a dearth of systems to examine and manipulate real-time primate implantation. Here we describe an in vitro three-dimensional (3-D) model to study implantation which utilized IVF-generated rhesus monkey embryos cultured in a Matrigel explant system.

METHODS

Blastocyst stage embryos were embedded in a 3-D microenvironment of a Matrigel carrier and co-cultured with a feeder layer of cells generating conditioned medium. Throughout the course of embryo co-culture embryo growth and secretions were monitored. Embedded embryos were then sectioned and stained for markers of trophoblast function and differentiation.

RESULTS

Signs of implantation were observed including enlargement of the embryo mass, and invasion and proliferation of trophoblast outgrowths. Expression of chorionic gonadotropin defined by immunohistochemical staining, and secretion of chorionic gonadotropin and progesterone coincident with the appearance of trophoblast outgrowths, supported the conclusion that a trophoblast cell lineage formed from implanted embryos. Positive staining for selected markers including Ki67, MHC class I, NeuN, CD31, vonWillebrand Factor and Vimentin, suggest growth and differentiation of the embryo following embedding.

CONCLUSIONS

This 3-D in vitro system will facilitate further study of primate embryo biology, with potential to provide a platform for study of genes related to implantation defects and trophoblast differentiation.

Three-dimensional hepatocyte culture system for the study of Echinococcus multilocularis larval development

Background

Hepatocyte-based metacestode culture is an attractive method to study alveolar echinococcosis (AE), but it is limited by the relatively short lifespan of cultured hepatocytes in maintaining their normal function.

Methodology/principal findings

We describe a three-dimensional (3D) hepatic culture system developed from co-cultured hepatocytes and mesenchymal stem cells using a collagen scaffold to study the development of Echinococcus multilocularis larvae. This 3D culture system preserved the function of hepatocytes for a longer period of time than their monolayer counterparts, with albumin secretion, 7-ethoxyresorufin O-deethylation activity, urea synthesis, CYP3A4 and CYP2D6 activity being highly preserved for 21–28 days. The expression levels of hepatocyte-specific genes including CLDN-3, Bsep, AFP, G6P, A1AT, CYP3A4 and NR1I3 were significantly higher in the 3D cultured system compared with their monolayer counterparts after 14-days in culture. Additionally, in the presence of 3D cultured hepatocytes, 81.2% of E. multilocularis protoscoleces rapidly de-differentiated into infective vesicles within eight weeks. Transcriptomic analyses revealed 807 differentially expressed genes between cultured vesicles and protoscoleces, including 119 genes uniquely expressed in protoscoleces, and 242 genes uniquely expressed in vesicles. These differentially expressed genes were mainly involved in parasite growth relating to the G-protein coupled receptor activity pathway, substrate-specific transmembrane transporter activity, cell-cell adhesion process, and potentially with neuroactive ligand-receptor interaction.

Conclusions/significance

This culture system provides a valuable advance in prolonging hepatocyte functionality, a foundation for future in-depth analysis of the host-parasite interaction in AE, and a useful model to evaluate potential therapeutic strategies to treat AE.

Alveolar echinococcosis (AE) is one of the world’s most dangerous zoonoses. Although there have been recent advances in some aspects of the molecular biology of E. multilocularis, larval development is far from understood. An in vitro hepatocyte based cultivation system for the metacestode stage of E. multilocularis has been developed to improve our understanding of AE. However, in two-dimensional conventional cultures, hepatocytes rapidly lose key phenotypic and functional characteristics after only approximately seven days. This hinders long-term in vitro studies of E. multilocularis larvae, which require several months for development. Thus, in this paper, a three-dimensional (3D) hepatic model was developed for simulating the organotropism of E. multilocularis toward the liver of its intermediate host. This 3D model can preserve the functions of hepatocytes and results in rapidly developed E. multilocularis larva. Genes uniquely expressed in protoscoleces and vesicles provided key information for the further study of AE. The 3D hepatic model provides a new foundation for E. multilocularis developmental studies and in-depth analysis of the host-parasite interaction in AE.

Suppression of endogenous lipogenesis induces reversion of the malignant phenotype and normalized differentiation in breast cancer

The correction of specific signaling defects can reverse the oncogenic phenotype of tumor cells by acting in a dominant manner over the cancer genome. Unfortunately, there have been very few successful attempts at identifying the primary cues that could redirect malignant tissues to a normal phenotype. Here we show that suppression of the lipogenic enzyme fatty acid synthase (FASN) leads to stable reversion of the malignant phenotype and normalizes differentiation in a model of breast cancer (BC) progression. FASN knockdown dramatically reduced tumorigenicity of BC cells and restored tissue architecture, which was reminiscent of normal ductal-like structures in the mammary gland. Loss of FASN signaling was sufficient to direct tumors to a reversed phenotype that was near normal when considering the development of polarized growth-arrested acinar-like structure similar to those formed by nonmalignant breast cells in a 3D reconstituted basement membrane in vitro. This process, in vivo, resulted in a low proliferation index, mesenchymal-epithelial transition, and shut-off of the angiogenic switch in FASN-depleted BC cells orthotopically implanted into mammary fat pads. The role of FASN as a negative regulator of correct breast tissue architecture and terminal epithelial cell differentiation was dominant over the malignant phenotype of tumor cells possessing multiple cancer-driving genetic lesions as it remained stable during the course of serial in vivo passage of orthotopic tumor-derived cells. Transient knockdown of FASN suppressed hallmark structural and cytosolic/secretive proteins (vimentin, N-cadherin, fibronectin) in a model of EMT-induced cancer stem cells (CSC). Indirect pharmacological inhibition of FASN promoted a phenotypic switch from basal- to luminal-like tumorsphere architectures with reduced intrasphere heterogeneity. The fact that sole correction of exacerbated lipogenesis can stably reprogram cancer cells back to normal-like tissue architectures might open a new avenue to chronically restrain BC progression by using FASN-based differentiation therapies.

Modeling multiple myeloma-bone marrow interactions and response to drugs in a 3D surrogate microenvironment

Multiple myeloma develops primarily inside the bone marrow microenvironment, that confers pro-survival signals and drug resistance. 3D cultures that reproduce multiple myeloma-bone marrow interactions are needed to fully investigate multiple myeloma pathogenesis and response to drugs. To this purpose, we exploited the 3D Rotary Cell Culture System bioreactor technology for myeloma-bone marrow co-cultures in gelatin scaffolds. The model was validated with myeloma cell lines that, as assessed by histochemical and electron-microscopic analyses, engaged contacts with stromal cells and endothelial cells. Consistently, pro-survival signaling and also cell adhesion-mediated drug resistance were significantly higher in 3D than in 2D parallel co-cultures. The contribution of the VLA-4/VCAM1 pathway to resistance to bortezomib was modeled by the use of VCAM1 transfectants. Soluble factor-mediated drug resistance could be also demonstrated in both 2D and 3D co-cultures. The system was then successfully applied to co-cultures of primary myeloma cells-primary myeloma bone marrow stromal cells from patients and endothelial cells, allowing the development of functional myeloma-stroma interactions and MM cell long-term survival. Significantly, genomic analysis performed in a high-risk myeloma patient demonstrated that culture in bioreactor paralleled the expansion of the clone that ultimately dominated in vivo. Finally, the impact of bortezomib on myeloma cells and on specialized functions of the microenvironment could be evaluated. Our findings indicate that 3D dynamic culture of reconstructed human multiple myeloma microenvironments in bioreactor may represent a useful platform for drug testing and for studying tumor-stroma molecular interactions.

Fabrication and Mechanical Properties Measurements of 3D Microtissues for the Study of Cell-Matrix Interactions

Cell interactions with the extracellular matrix (ECM) are critical to cell and tissue functions involving adhesion, communication, and differentiation. Three-dimensional (3D) in vitro culture systems are an important approach to mimic in vivo cell-matrix interactions for mechanobiology studies and tissue engineering applications. This chapter describes the use of engineered microtissues as 3D constructs in combination with a magnetic tissue gauge (μTUG) system to analyze tissue mechanical properties. The μTUG system is composed of poly(dimethylsiloxane) (PDMS) microwells with vertical pillars in the wells. Self-assembled microtissues containing cells and ECM gel can form between the pillars, and generate mechanical forces that deform the pillars, which provides a readout of those forces. Herein, detailed procedures for microfabrication of the PDMS μTUG system, seeding and growth of cells with ECM gels in the microwells, and measurements of the mechanical properties of the resulting microtissues via magnetic actuation of magnetic sphere-tagged μTUGs are described.

Novel Models to Study Stromal Cell-Leukocyte Interactions in Health and Disease

To study human immunology in general and stromal immunology in particular, it is highly motivated to move from monolayers to 3D cultures, such as organotypic models, that better mimic the function of living tissue. These models can potentially contain most if not all cell types present in tissues, in combination with different extracellular matrix components that can critically affect cell phenotype. Besides their well-established use in studies of tissue-specific cells, such as epithelial cells, endothelial cells and stromal fibroblasts in combination with extracellular components, these models have also been shown to be valuable to study how tissue participates in the regulation of leukocyte differentiation and function. Organotypic models with leukocytes represent novel powerful tools to study human stromal immunology and mechanisms involved in the regulation of leukocyte functions and inflammatory processes in human health and disease. In particular, these models are robust, long-lived and reproducible and allow monitoring of disease progression in real time, as well as the mixing of cellular constituents from healthy and pathological tissues. These models are also easy to manipulate, either genetically or by adding external stimulants, such as cytokines and pathogens, to mimic pathological conditions. It is thus not surprising that these models are proposed to be useful in toxicology screening assays, evaluating therapeutic efficacy of drugs and antibiotics, as well as in personalized medicine. Within this chapter, the most recent developments in creating organotypic models for the purpose of study of human leukocyte and stromal cell interactions, in health and disease, will be discussed, in particular focusing on live imaging. Special emphasis will be given on an organotypic model resembling human lung and its usefulness in studying the fine control of physiological and pathological processes in human health and disease. Using these models in studies on human stromal cell and leukocyte interactions will likely help identifying novel disease traits and may point out new potential targets to monitor and treat human diseases.

VEGF/BMP-2 loaded three-dimensional model for enhanced angiogenic and odontogenic potential of dental pulp stem cells

AIM

To investigate the proliferation and differentiation potential of human dental pulp stem cells (DPSCs) in a three-dimensional culture model (TDM) by incorporation of VEGF and BMP-2.

METHODOLOGY

TDM was established using fibrin gel (fg) as a soft tissue matrix and demineralized dentine disc (dd) as a hard tissue matrix. DPSCs and vascular endothelial growth factor (VEGF) were encapsulated in fibrin gel (fg-VEGF) and then inserted into bone morphogenetic protein (BMP-2)-coated demineralized dentine discs (dd-BMP-2). DPSCs were incubated for 28 days in various fg/dd combinations in the absence or presence of VEGF and BMP-2. Proliferation and morphology of DPSCs in fibrin gel were analysed using MTT and Live&Dead assays. Release profiles of VEGF and BMP-2 from fibrin gel and dentine discs were quantified using ELISA, and the expressions of angiogenic and odontogenic differentiation markers were determined with RT-qPCR analysis. Data were analysed statistically using Wilcoxon signed rank tests, Kruskal-Wallis tests with Mann-Whitney U tests and Bonferroni adjustment. The level of significance was set at P < 0.05.

RESULTS

DPSCs were able to proliferate and showed interconnected cellular elongations in fibrin gel depending on fibrinogen concentration whilst monolayer control group showed typical fibroblast-like cell morphology. Encapsulating of VEGF in fibrin gel and BMP-2 in gelatin that was used to coat dentine discs allowed the controlled releases of growth factors, which induced angiogenic and odontogenic gene expressions by DPSCs. Higher expressions of PECAM as an angiogenic factor, and BSP, DMP-1, OCN and CBFA as odontogenic factors, were observed in TDM as compared to the other fg/dd combinations and the monolayer control group (P < 0.05).

CONCLUSIONS

TDM consisting of fibrin gel and dentine matrix allowed cell-cell interactions. TDM was highly effective in delivering both VEGF and BMP-2 that enhanced the angiogenic and odontogenic potential of DPSCs.

Vascular Endothelial-Breast Epithelial Cell Coculture Model Created from 3D Cell Structures

Endothelial cell interactions with normal and cancerous breast epithelial cells have been widely studied in tissue growth and development, as well as in angiogenesis and metastasis. Despite the understanding that 3D multicellular architecture is critical to the cell phenotype, 3D vascular structures have not yet been cocultured with 3D breast spheroids in vitro. The objective of this study was therefore to create a hierarchical, multiscale model of vascular endothelial-breast epithelial cell interactions in which both cell types were assembled into their 3D architectures. The model was successfully fabricated by adding preformed breast spheroids onto preformed endothelial tube-like networks. Through this model, we observed that breast spheroids maintain vascular tube-like networks. Over time, breast epithelial cells migrate out of the spheroid structure along the endothelial networks. This research shows that 3D cell structures serve as an important building block for creating multicellular coculture models to study physiologically relevant cell-cell interactions.

Polyurethane foam scaffold as in vitro model for breast cancer bone metastasis

Breast cancer (BC) represents the most incident cancer case in women (29%), with high mortality rate. Bone metastasis occurs in 20-50% cases and, despite advances in BC research, the interactions between tumor cells and the metastatic microenvironment are still poorly understood. In vitro 3D models gained great interest in cancer research, thanks to the reproducibility, the 3D spatial cues and associated low costs, compared to in vivo and 2D in vitro models. In this study, we investigated the suitability of a poly-ether-urethane (PU) foam as 3D in vitro model to study the interactions between BC tumor-initiating cells and the bone microenvironment. PU foam open porosity (>70%) appeared suitable to mimic trabecular bone structure. The PU foam showed good mechanical properties under cyclic compression (E=69-109kPa), even if lower than human trabecular bone. The scaffold supported osteoblast SAOS-2 cell line proliferation, with no cytotoxic effects. Human adipose derived stem cells (ADSC) were cultured and differentiated into osteoblast lineage on the PU foam, as shown by alizarin red staining and RT-PCR, thus offering a bone biomimetic microenvironment to the further co-culture with BC derived tumor-initiating cells (MCFS). Tumor aggregates were observed after three weeks of co-culture by e-cadherin staining and SEM; modification in CaP distribution was identified by SEM-EDX and associated to the presence of tumor cells. In conclusion, we demonstrated the suitability of the PU foam to reproduce a bone biomimetic microenvironment, useful for the co-culture of human osteoblasts/BC tumor-initiating cells and to investigate their interaction.

STATEMENT OF SIGNIFICANCE

3D in vitro models represent an outstanding alternative in the study of tumor metastases development, compared to traditional 2D in vitro cultures, which oversimplify the 3D tissue microenvironment, and in vivo studies, affected by low reproducibility and ethical issues. Several scaffold-based 3D in vitro models have been proposed to recapitulate the development of metastases in different body sites but, still, the crucial challenge is to correctly mimic the tissue to be modelled in terms of physical, mechanical and biological properties. Here, we prove the suitability of a porous polyurethane foam, synthesized using an appropriate formulaton, in mimicking the bone tissue microenvironment and in reproducing the metastatic colonization derived from human breast cancer, particularly evidencing the devastating effects on the bone extracellular matrix caused by metastatic spreading.

Fitting tissue chips and microphysiological systems into the grand scheme of medicine, biology, pharmacology, and toxicology

Microphysiological systems (MPS), which include engineered organoids (EOs), single organ/tissue chips (TCs), and multiple organs interconnected to create miniature in vitro models of human physiological systems, are rapidly becoming effective tools for drug development and the mechanistic understanding of tissue physiology and pathophysiology. The second MPS thematic issue of Experimental Biology and Medicine comprises 15 articles by scientists and engineers from the National Institutes of Health, the IQ Consortium, the Food and Drug Administration, and Environmental Protection Agency, an MPS company, and academia. Topics include the progress, challenges, and future of organs-on-chips, dissemination of TCs into Pharma, children's health protection, liver zonation, liver chips and their coupling to interconnected systems, gastrointestinal MPS, maturation of immature cardiomyocytes in a heart-on-a-chip, coculture of multiple cell types in a human skin construct, use of synthetic hydrogels to create EOs that form neural tissue models, the blood-brain barrier-on-a-chip, MPS models of coupled female reproductive organs, coupling MPS devices to create a body-on-a-chip, and the use of a microformulator to recapitulate endocrine circadian rhythms. While MPS hardware has been relatively stable since the last MPS thematic issue, there have been significant advances in cell sourcing, with increased reliance on human-induced pluripotent stem cells, and in characterization of the genetic and functional cell state in MPS bioreactors. There is growing appreciation of the need to minimize perfusate-to-cell-volume ratios and respect physiological scaling of coupled TCs. Questions asked by drug developers are followed by an analysis of the potential value, costs, and needs of Pharma. Of highest value and lowest switching costs may be the development of MPS disease models to aid in the discovery of disease mechanisms; novel compounds including probes, leads, and clinical candidates; and mechanism of action of drug candidates. Impact statement Microphysiological systems (MPS), which include engineered organoids and both individual and coupled organs-on-chips and tissue chips, are a rapidly growing topic of research that addresses the known limitations of conventional cellular monoculture on flat plastic - a well-perfected set of techniques that produces reliable, statistically significant results that may not adequately represent human biology and disease. As reviewed in this article and the others in this thematic issue, MPS research has made notable progress in the past three years in both cell sourcing and characterization. As the field matures, currently identified challenges are being addressed, and new ones are being recognized. Building upon investments by the Defense Advanced Research Projects Agency, National Institutes of Health, Food and Drug Administration, Defense Threat Reduction Agency, and Environmental Protection Agency of more than $200 million since 2012 and sizable corporate spending, academic and commercial players in the MPS community are demonstrating their ability to meet the translational challenges required to apply MPS technologies to accelerate drug development and advance toxicology.

Influence of surface geometry on the culture of human cell lines: A comparative study using flat, round-bottom and v-shaped 96 well plates

In vitro cell based models have been invaluable tools for studying cell behaviour and for investigating drug disposition, toxicity and potential adverse effects of administered drugs. Within this drug discovery pipeline, the ability to assess and prioritise candidate compounds as soon as possible offers a distinct advantage. However, the ability to apply this approach to a cell culture study is limited by the need to provide an accurate, in vitro-like, microenvironment in conjunction with a low cost and high-throughput screening (HTS) methodology. Although the geometry and/or alignment of cells has been reported to have a profound influence on cell growth and differentiation, only a handful of studies have directly compared the growth of a single cell line on different shaped multiwell plates the most commonly used substrate for HTS, in vitro, studies. Herein, the impact of various surface geometries (flat, round and v-shaped 96 well plates), as well as fixed volume growth media and fixed growth surface area have been investigated on the characteristics of three commonly used human cell lines in biopharmaceutical research and development, namely ARPE-19 (retinal epithelial), A549 (alveolar epithelial) and Malme-3M (dermal fibroblastic) cells. The effect of the surface curvature on cells was characterised using a combination of a metabolic activity assay (CellTiter AQ/MTS), LDH release profiles (CytoTox ONE) and absolute cell counts (Guava ViaCount), respectively. In addition, cell differentiation and expression of specific marker proteins were determined using flow cytometry. These in vitro results confirmed that surface topography had a significant effect (p < 0.05) on cell activity and morphology. However, although specific marker proteins were expressed on day 1 and 5 of the experiment, no significant differences were seen between the different plate geometries (p < 0.05) at the later time point. Accordingly, these results highlight the impact of substrate geometry on the culture of a cell line and the influence it has on the cells' correct growth and differentiation characteristics. As such, these results provide important implications in many aspects of cell biology the development of a HTS, in vitro, cell based systems to further investigate different aspects of toxicity testing and drug delivery.

Microscale Bioreactors for in situ characterization of GI epithelial cell physiology

The development of in vitro artificial small intestines that realistically mimic in vivo systems will enable vast improvement of our understanding of the human gut and its impact on human health. Synthetic in vitro models can control specific parameters, including (but not limited to) cell types, fluid flow, nutrient profiles and gaseous exchange. They are also “open” systems, enabling access to chemical and physiological information. In this work, we demonstrate the importance of gut surface topography and fluid flow dynamics which are shown to impact epithelial cell growth, proliferation and intestinal cell function. We have constructed a small intestinal bioreactor using 3-D printing and polymeric scaffolds that mimic the 3-D topography of the intestine and its fluid flow. Our results indicate that TEER measurements, which are typically high in static 2-D Transwell apparatuses, is lower in the presence of liquid sheer and 3-D topography compared to a flat scaffold and static conditions. There was also increased cell proliferation and discovered localized regions of elevated apoptosis, specifically at the tips of the villi, where there is highest sheer. Similarly, glucose was actively transported (as opposed to passive) and at higher rates under flow.

Galectin-3, a Druggable Vulnerability for KRAS-Addicted Cancers

Identifying the molecular basis for cancer cell dependence on oncogenes such as KRAS can provide new opportunities to target these addictions. Here, we identify a novel role for the carbohydrate-binding protein galectin-3 as a lynchpin for KRAS dependence. By directly binding to the cell surface receptor integrin αvβ3, galectin-3 gives rise to KRAS addiction by enabling multiple functions of KRAS in anchorage-independent cells, including formation of macropinosomes that facilitate nutrient uptake and ability to maintain redox balance. Disrupting αvβ3/galectin-3 binding with a clinically active drug prevents their association with mutant KRAS, thereby suppressing macropinocytosis while increasing reactive oxygen species to eradicate αvβ3-expressing KRAS-mutant lung and pancreatic cancer patient-derived xenografts and spontaneous tumors in mice. Our work reveals galectin-3 as a druggable target for KRAS-addicted lung and pancreas cancers, and indicates integrin αvβ3 as a biomarker to identify susceptible tumors.Significance: There is a significant unmet need for therapies targeting KRAS-mutant cancers. Here, we identify integrin αvβ3 as a biomarker to identify mutant KRAS-addicted tumors that are highly sensitive to inhibition of galectin-3, a glycoprotein that binds to integrin αvβ3 to promote KRAS-mediated activation of AKT. Cancer Discov; 7(12); 1464-79. ©2017 AACR.This article is highlighted in the In This Issue feature, p. 1355.

Three-Dimensional Patient-Derived In Vitro Sarcoma Models: Promising Tools for Improving Clinical Tumor Management

Over the past decade, the development of new targeted therapeutics directed against specific molecular pathways involved in tumor cell proliferation and survival has allowed an essential improvement in carcinoma treatment. Unfortunately, the scenario is different for sarcomas, a group of malignant neoplasms originating from mesenchymal cells, for which the main therapeutic approach still consists in the combination of surgery, chemotherapy, and radiation therapy. The lack of innovative approaches in sarcoma treatment stems from the high degree of heterogeneity of this tumor type, with more that 70 different histopathological subtypes, and the limited knowledge of the molecular drivers of tumor development and progression. Currently, molecular therapies are available mainly for the treatment of gastrointestinal stromal tumor, a soft-tissue malignancy characterized by an activating mutation of the tyrosine kinase KIT. Since the first application of this approach, a strong effort has been made to understand sarcoma molecular alterations that can be potential targets for therapy. The low incidence combined with the high level of histopathological heterogeneity makes the development of clinical trials for sarcomas very challenging. For this reason, preclinical studies are needed to better understand tumor biology with the aim to develop new targeted therapeutics. Currently, these studies are mainly based on in vitro testing, since cell lines, and in particular patient-derived models, represent a reliable and easy to handle tool for investigation. In the present review, we summarize the most important models currently available in the field, focusing in particular on the three-dimensional spheroid/organoid model. This innovative approach for studying tumor biology better represents tissue architecture and cell–cell as well as cell–microenvironment crosstalk, which are fundamental steps for tumor cell proliferation and survival.

Growth of hollow cell spheroids in microbead templated chambers

Cells form hollow, spheroidal structures during the development of many tissues, including the ocular lens, inner ear, and many glands. Therefore, techniques for in vitro formation of hollow spheroids are valued for studying developmental and disease processes. Current in vitro methods require cells to self-organize into hollow morphologies; we explored an alternative strategy based on cell growth in predefined, spherical scaffolds. Our method uses sacrificial, gelatin microbeads to simultaneously template spherical chambers within a hydrogel and deliver cells into the chambers. We use mouse lens epithelial cells to demonstrate that cells can populate the internal surfaces of the chambers within a week to create numerous hollow spheroids. The platform supports manipulation of matrix mechanics, curvature, and biochemical composition to mimic in vivo microenvironments. It also provides a starting point for engineering organoids of tissues that develop from hollow spheroids.

Recent Progress in Hepatocyte Culture Models and Their Application to the Assessment of Drug Metabolism, Transport, and Toxicity in Drug Discovery: The Value of Tissue Engineering for the Successful Development of a Microphysiological System

Tissue engineering technology has provided many useful culture models. This article reviews the merits of this technology in a hepatocyte culture system and describes the applications of the sandwich-cultured hepatocyte model in drug discovery. In addition, we also review recent investigations of the utility of the 3-dimensional bioprinted human liver tissue model and spheroid model. Finally, we present the future direction and developmental challenges of a hepatocyte culture model for the successful establishment of a microphysiological system, represented as an organ-on-a-chip and even as a human-on-a-chip. A merit of advanced culture models is their potential use for detecting hepatotoxicity through repeated exposure to chemicals as they allow long-term culture while maintaining hepatocyte functionality. As a future direction, such advanced hepatocyte culture systems can be connected to other tissue models for evaluating tissue-to-tissue interaction beyond cell-to-cell interaction. This combination of culture models could represent parts of the human body in a microphysiological system.

Immunomodulatory and protective effects of adipose tissue-derived mesenchymal stem cells in an allograft islet composite transplantation for experimental autoimmune type 1 diabetes

BACKGROUND

Allogeneic islet transplantation could be an ideal alternative therapy for Type 1 Diabetes Mellitus (T1DM). Adipose Tissue-derived Mesenchymal Stem Cells (AT-MSCs) characterized by immunomodulatory and protective effects may have the potential to improve the outcome of this highly immunogenic transplant.

METHODS

Syngenic AT-MSCs along with allograft islets embedded in hydrogelic composite and transplanted intraperitoneally in Streptozotocin (STZ) induced diabetic C57BL/6 mice.

RESULTS

In vitro experiments of co-imbedded islets and AT-MSCs in a hydrogel revealed AT-MSCs are able to significantly increase insulin secretion. During a 32 days of post-transplant period, blood glucose monitoring showed a decrease from over 400mg/dl to less than 150mg/dl and at the end of 32 days, mice have been dissected and assessed. Graft histopathology demonstrated that hydrogel makes an artificial immune isolation site and AT-MSCs contribute greatly to the reduction of the immune cells infiltration. Analyses of mononuclear cells isolated from Mesenteric Lymph Nodes (MLNs) and spleen showed that AT-MSCs co-transplanted with allograft decreased pro-inflammatory cytokines and increased regulatory cytokines (for both MLNs and spleen) and regulatory T cells (Treg) population (only for MLNs). In addition, real time-PCR assays revealed that transcript levels of IDO, iNOS, and PDX1, significantly increased in allograft islets in the presence of AT-MSCs.

CONCLUSIONS

according to results, this investigation indicates that AT-MSCs can be regarded as promising complementary candidates for engineered-cell therapy using hydrogel composites in islet transplantation.

Importance of endogenous extracellular matrix in biomechanical properties of human skin model

The physical and mechanical properties of cells modulate their behavior such proliferation rate, migration and extracellular matrix remodeling. In order to study cell behavior in a tissue-like environment in vitro, it is of utmost importance to develop biologically and physically relevant 3D cell models. Here, we characterized the physical properties of a single cell type growing in configurations of increasing complexity. From one human skin biopsy, primary dermal fibroblasts were isolated and seeded to give monolayer (2D model), spheroid (3D model poor in extracellular matrix) and tissue-engineered cell sheet (3D model rich in endogenous extracellular matrix). Living native human dermis tissue was used as a gold standard. Nanomechanical and viscoelastic properties at the cell scale were measured by atomic force microscopy (AFM) while biphoton microscopy allowed collagen detection by second harmonic generation and scanning electron microscopy helped in model morphological characterization. In all models, fibroblasts presented a similar typical elongated cell shape, with a cytoskeleton well-arranged along the long axis of the cell. However, elastic moduli of the tissue-engineered cell sheet and native dermis tissue were similar and statistically lower than monolayer and spheroid models. We successfully carried out AFM force measurements on 3D models such as spheroids and tissue-engineered cell sheets, as well as on living native human tissue. We demonstrated that a tissue-engineered dermal model recapitulates the mechanical properties of human native dermal tissue unlike the classically used monolayer and spheroid models. Furthermore, we give statistical evidence to indicate a correlation between cell mechanical properties and the presence of collagens in the models studied.

Downregulation of PRDM1 promotes cellular invasion and lung cancer metastasis

The zinc-finger transcription factor PRDM1 (PR domain containing 1) plays key roles in the development of malignant lymphoma, leukaemia and some non-haematopoietic cancers, including breast cancer, colorectal cancer and glioma. However, little is known regarding the function of PRDM1 in the progression of lung cancer. Here, we found that PRDM1 is expressed in normal human lung epithelium but is downregulated in lung cancer cells. Decreased expression of PRDM1 correlates with poor prognosis in lung cancer. Depletion of PRDM1 in lung cancer cells promotes cellular invasion and anoikis resistance in vitro and lung metastasis in vivo. PRDM1 is silenced by an ectopically expressed lymphocyte-specific transcription factor Aiolos. The transcription of these two genes is negatively correlated in 206 lung epithelial cell lines. Our results indicate that PRDM1 functions as a tumour suppressor in lung cancer.

Choosing wisely - Preclinical test models in the era of precision medicine

Through the introduction of a steadily growing variety of preclinical test models drug development and biomarker research has advanced. Next to classical used 2D cell line cultures, tissue-slice cultures, 3D organoid cell cultures, genetically engineered mouse models, cell line derived mouse models and patient derived xenografts may be selected for a specific question. All models harbor advantages and disadvantages. This review focuses on the available preclinical test models, novel developments such as humanized mice and discusses for which question a particular model should be employed.

Three-dimensional organotypic co-culture model of intestinal epithelial cells and macrophages to study Salmonella enterica colonization patterns

Three-dimensional models of human intestinal epithelium mimic the differentiated form and function of parental tissues often not exhibited by two-dimensional monolayers and respond to Salmonella in key ways that reflect in vivo infections. To further enhance the physiological relevance of three-dimensional models to more closely approximate in vivo intestinal microenvironments encountered by Salmonella, we developed and validated a novel three-dimensional co-culture infection model of colonic epithelial cells and macrophages using the NASA Rotating Wall Vessel bioreactor. First, U937 cells were activated upon collagen-coated scaffolds. HT-29 epithelial cells were then added and the three-dimensional model was cultured in the bioreactor until optimal differentiation was reached, as assessed by immunohistochemical profiling and bead uptake assays. The new co-culture model exhibited in vivo-like structural and phenotypic characteristics, including three-dimensional architecture, apical-basolateral polarity, well-formed tight/adherens junctions, mucin, multiple epithelial cell types, and functional macrophages. Phagocytic activity of macrophages was confirmed by uptake of inert, bacteria-sized beads. Contribution of macrophages to infection was assessed by colonization studies of Salmonella pathovars with different host adaptations and disease phenotypes (Typhimurium ST19 strain SL1344 and ST313 strain D23580; Typhi Ty2). In addition, Salmonella were cultured aerobically or microaerobically, recapitulating environments encountered prior to and during intestinal infection, respectively. All Salmonella strains exhibited decreased colonization in co-culture (HT-29-U937) relative to epithelial (HT-29) models, indicating antimicrobial function of macrophages. Interestingly, D23580 exhibited enhanced replication/survival in both models following invasion. Pathovar-specific differences in colonization and intracellular co-localization patterns were observed. These findings emphasize the power of incorporating a series of related three-dimensional models within a study to identify microenvironmental factors important for regulating infection.

Human Three-Dimensional Endometrial Epithelial Cell Model To Study Host Interactions with Vaginal Bacteria and Neisseria gonorrhoeae

Colonization of the endometrium by pathogenic bacteria ascending from the lower female reproductive tract (FRT) is associated with many gynecologic and obstetric health complications. To study these host-microbe interactions in vitro, we developed a human three-dimensional (3-D) endometrial epithelial cell (EEC) model using the HEC-1A cell line and the rotating wall vessel (RWV) bioreactor technology. Our model, composed of 3-D EEC aggregates, recapitulates several functional/structural characteristics of human endometrial epithelial tissue, including cell differentiation, the presence of junctional complexes/desmosomes and microvilli, and the production of membrane-associated mucins and Toll-like receptors (TLRs). TLR function was evaluated by exposing the EEC aggregates to viral and bacterial products. Treatment with poly(I·C) and flagellin but not with synthetic lipoprotein (fibroblast-stimulating lipoprotein 1 [FSL-1]) or lipopolysaccharide (LPS) significantly induced proinflammatory mediators in a dose-dependent manner. To simulate ascending infection, we infected EEC aggregates with commensal and pathogenic bacteria: Lactobacillus crispatus, Gardnerella vaginalis, and Neisseria gonorrhoeae All vaginal microbiota and N. gonorrhoeae efficiently colonized the 3-D surface, localizing to crevices of the EEC model and interacting with multiple adjacent cells simultaneously. However, only infection with pathogenic N. gonorrhoeae and not infection with the other bacteria tested significantly induced proinflammatory mediators and significant ultrastructural changes to the host cells. The latter observation is consistent with clinical findings and illustrated the functional specificity of our system. Additionally, we highlighted the utility of the 3-D EEC model for the study of the pathogenesis of N. gonorrhoeae using a well-characterized ΔpilT mutant. Overall, this study demonstrates that the human 3-D EEC model is a robust tool for studying host-microbe interactions and bacterial pathogenesis in the upper FRT.

Imaging Cell-Matrix Interactions in 3D Collagen Hydrogel Culture Systems

3D hydrogels better replicate in vivo conditions, and yield different results from 2D substrates. However, imaging interactions between cells and the hydrogel microenvironment is challenging because of light diffraction and poor focal depth. Here, cryosectioning and vibrating microtomy methods and fixation protocols are compared. Collagen I/III hydrogel sections (20-100 µm) are fixed with paraformaldehyde (2%-4%) and structurally evaluated. Cryosectioning damaged hydrogels, and vibrating microtomy (100 µm, 2%) yielded the best preservation of microstructure and cell integrity. These results demonstrate a potential processing method that preserves hydrogel and cell integrity, permitting imaging of cell interactions with the microenvironment.

In vitro pre-vascularization strategies for tissue engineered constructs-Bioprinting and others

Tissue-engineered products commercially available today have been limited to thin avascular tissue such as skin and cartilage. The fabrication of thicker, more complex tissue still eludes scientists today. One reason for this is the lack of effective techniques to incorporate functional vascular networks within thick tissue constructs. Vascular networks provide cells throughout the tissue with adequate oxygen and nutrients; cells located within thick un-vascularized tissue implants eventually die due to oxygen and nutrient deficiency. Vascularization has been identified as one of the key components in the field of tissue engineering. In order to fabricate biomimetic tissue which accurately recapitulates our native tissue environment, in vitro pre-vascularization strategies need to be developed. In this review, we describe various in vitro vascularization techniques developed recently which employ different technologies such as bioprinting, microfluidics, micropatterning, wire molding, and cell sheet engineering. We describe the fabrication process and unique characteristics of each technique, as well as provide our perspective on the future of the field.